Panasonic Kx Pw607dw User Manual

Facsimile  
Quick Reference Guide  
Model No.  
KX-PW607DL  
KX-PW607DW  
Main unit:  
KX-PW607  
Portable handset: KX-FKN515  
KX-PW607DL  
Thank you for purchasing a Panasonic facsimile.  
Table of Contents  
Finding the controls …………………………………………………………… 2  
Installations and connections ………………………………………………… 4  
Setting the date and time……………………………………………………… 7  
Setting your facsimile telephone number …………………………………… 7  
Setting your logo ……………………………………………………………… 8  
Character input and command key table …………………………………… 9  
Voice guide…………………………………………………………………… 10  
Automatic dialing on the main unit ………………………………………… 11  
Automatic dialing on the portable handset (KX-FKN515) ……………… 13  
Intercom ……………………………………………………………………… 14  
Sending faxes ……………………………………………………………… 15  
Receiving faxes…………………………………………………………… 16  
Operating the built-in answering device ………………………………… 18  
Night mode…………………………………………………………………… 20  
Call block …………………………………………………………………… 21  
SD Memory Card …………………………………………………………… 22  
Trademarks ………………………………………………………………… 23  
Specifications ……………………………………………………… Backcover  
This guide explains some basic features and operations, but not all of them.  
For further details, see the Japanese operating instructions.  
This product is designed for use in Japan.  
Panasonic cannot provide service for this product if used outside Japan.  
Any details given in this guide are subject to change without notice.  
This unit is equipped with the voice guide features. (Japanese only)  
For details about voice guide, please see page 10.  
Finding the controls  
Portable handset (KX-FKN515)  
Liquid crystal display  
Earpiece  
How to use  
key  
To use the phonebook.  
To redial the phone  
numbers in the redial  
list. The last 10 phone  
numbers dialed are  
stored in memory.  
Portable handset number  
(and name)  
No link to the main unit  
Function menu that is  
To adjust the volume.  
To change Hiragana into  
Kanji.  
controlled by  
or  
Battery strength  
To make/answer calls.  
How to use  
buttons  
To end a call.  
To end or exit from editing  
or other operations.  
and  
buttons refer to the function  
displayed on the bottom of the display.  
They function differently depending on  
the mode.  
To put a call on hold.  
To start a search in the  
Number Display log.  
(For Number Display  
service users.)  
To change your voice.  
To mute your voice to the  
other party by pressing this  
button for about 2 seconds.  
(To release the mute,  
To page the main unit  
and/or portable handset(s).  
press this button again.)  
Dial buttons  
Tone button  
For call waiting service  
users.  
To clear letters/numbers.  
To switch to tone dialing.  
Sharp button  
Microphone  
Key lock button  
To lock the portable  
Do not cover the  
microphone while  
talking.  
To use the speakerphone.  
handset so that no calls  
or setings can be made.  
To turn key lock on,  
press this button for  
about 3 seconds until a  
single beep is heard.  
” is displayed.  
To turn key lock off,  
press this button for  
about 3 seconds.  
3
Installations and connections  
Installing the ink film  
1
2
3
Open the control panel.  
Open the back cover.  
Insert the ink film.  
Insert the orange  
gear into the left slot  
of the main unit.  
Insert the white gear into the right slot  
of the main unit.  
4
5
If the ink film is slack, tighten it by  
winding this gear (orange)  
.
Close the back cover pressing  
” down on both sides  
until it clicks into place.  
6
Close the control panel.  
When the unit runs out of ink film, the following message will be displayed.  
フィルムがなくなりました U23  
交換してください  
番:X-FAN190  
Install a new ink film.  
Replacement ink film:  
KX-FAN190 (15 m)  
714  
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film  
than does the KX-FAN190/190W.  
KX-FAN190W (15 m X 2)  
KX-FAN191 (15 m) (*1)  
KX-FAN191W (15 m X 2) (*1) 1,523  
1,208  
893  
As of February 2008.  
Tax included.  
4
Installations and connections  
Installing recording paper (A4 size)  
1
2
Open the recording paper tray.  
Set up the recording paper stands.  
Pull out the front stand first.  
3
Insert the recording paper into the  
recording paper tray. (Up to 15 sheets)  
Recording paper  
Fan the stack of recording paper.  
Printing side is  
on the back.  
Folding the recording paper tray  
1 Remove the recording paper and fold the recording  
2 Close the recording paper tray.  
paper stands in.  
5
Installations and connections  
Connecting the main unit  
Setting up the portable handset  
(KX-FKN515)  
1
Raise the antenna.  
1
2
Connect the cord and  
place the handset on  
the main unit.  
2
Telephone line cord  
(supplied accessory)  
Wall jack  
Battery  
3
Connect the telephone line cord.  
3
Power outlet  
(AC 100 V)  
Power cord  
Power outlet  
(AC 100 V)  
4
Connect the power cord.  
After the Power On...  
1 This unit will automatically select the dialing  
mode (Tone/Pulse).  
2 When the following is displayed, press  
ひかり電話利用  
, なし  
(Stop).  
あり  
If you can not make a call...  
Set the dialing mode with the main unit.  
Charger  
1. Press  
(Function).  
2. Press  
.
4
Charge the battery in the charger for 10 hours.  
3. Press  
(Search button) repeatedly until the  
After your Panasonic battery is fully charged,  
desired setting is selected.  
it will last up to about 5 hours of conversation.  
Example :  
プッシュ : Tone  
回線種別  
自動, プッシュ,  
20  
: Pulse (20 PPS)  
: Pulse (10 PPS)  
,10  
20  
10  
自動 : Auto (Default)  
4. Press  
5. Press  
(Set).  
(Stop).  
6
Setting the date and time  
Setting your facsimile  
telephone number  
最初の設定  
呼出音とベル回数  
音声の設定  
最初の設定  
呼出音とベル回数  
音声の設定  
1
2
Press  
Press  
(Function).  
1
2
Press  
Press  
(Function).  
電話帳の設定  
電話帳の設定  
.
Example :  
.
2008  
09  
30  
あなたの電話番号  
1500  
Cursor  
3
Enter the correct year/month/day.  
Example: October 1, 2008  
3
Enter your facsimile telephone number, up to  
20 digits.  
Press  
.
+
Example: 098 7654··  
あなたの電話番号  
2008  
1500  
10  
01  
+098 7654..  
4
5
Enter the correct hour/minute in a 24-hour clock entry.  
Example: 15:45 (3:45 PM)  
The  
(Tone) button replaces  
the digit with “+”.  
Press  
.
The  
a space.  
button replaces the digit with  
2008  
10  
01  
1545  
Press  
(Set).  
4
5
Press  
(Set).  
登録しました  
登録しました  
あなたの電話番号  
2008  
10  
01  
+098 7654..  
1545  
6
Press  
(Stop).  
Press  
(Stop).  
Example :  
Example :  
 
 
 
 
用件   
ファクス   
0
0
 
 
 
 
用件   
ファクス   
0
0
7
Setting your logo  
Example: Micah  
1. Press  
once.  
名前  
印刷用  
]  
M
Cursor  
2. Press  
six times.  
six times.  
名前  
印刷用  
?  
]  
M i  
3. Press  
最初の設定  
呼出音とベル回数  
音声の設定  
名前  
c
M i c  
印刷用  
]  
1
2
Press  
Press  
(Function).  
電話帳の設定  
4. Press  
to move the cursor to the next space  
four times.  
and press  
名前  
印刷用  
?  
かな]  
名前  
印刷用  
?  
]  
.
M i c a  
_
5. Press  
five times.  
(Set).  
Cursor  
名前  
M i c a h
印刷用  
]  
3
Enter your logo, up to 30 characters, using the dial  
keypad.  
登録しました  
4
5
Press  
To enter English characters easily, press  
(Character input mode) repeatedly and select  
” (English and sign input mode).  
For details, see the table on page 9 for instructions.  
名前  
印刷用  
?  
]  
M
i c a h  
_
Press  
(Stop).  
Example :  
 
 
 
 
用件   
ファクス   
0
0
8
Character input and command key table  
Pressing the dial keys will select a character as shown below.  
Character  
Hiragana  
Katakana  
English  
Numbers  
Display of the  
main unit and the  
portable handset  
[かな]  
[カナ]  
[英]  
[数]  
Dial key  
Portable  
handset  
KX-FKN515  
Main  
unit  
(
)
(
)
あいうえお  
ぁぃぅぇぉ  
アイウエオ  
ァィゥェォ  
^
@ . _ – & $ ¥ % + = ~  
1
かきくけこ  
カキクケコ  
A B C a b c  
D E F d e f  
2
3
4
5
6
7
8
9
さしすせそ  
たちつてとっ  
なにぬねの  
はひふへほ  
まみむめも  
やゆよゃゅょ  
らりるれろ  
サシスセソ  
タチツテトッ  
ナニヌネノ  
ハヒフヘホ  
マミムメモ  
ヤユヨャュョ  
ラリルレロ  
G H I g h i  
J K L j k l  
M N O m n o  
P Q R S p q r s  
T U V t u v  
W X Y Z w x y z  
! ? / ー  
( ) [ ]  「 」  
# ‚  
;
: | ’ ”  
わをんー!? ( )  
゛°、 。  
ワヲンー!? ( )  
0
、 。  
Used to change the character input  
mode.  
(Main unit),  
(Portable handset)  
Used to move the cursor to the left  
and right.  
(Main unit),  
(Portable handset)  
Command keys  
Used to delete a character.  
Used to insert a space.  
(Main unit),  
(Main unit),  
(Portable handset)  
(Portable handset)  
The characters on the display are somewhat different from those shown in the character input and command key table.  
9
Voice guide  
Operation guide  
The unit starts the following voice guidance in Japanese:  
Operations  
To cancel the operation guide  
Send a fax  
(Select  
)
なし  
なし  
Copy  
Add entries to the phonebook  
Store phonebook entries in the speed dialer  
(Select  
)
Make a call using the phonebook/redial/  
speed dialer/call memory  
(Select  
(Select  
)
なし  
なし  
Change a ink film  
Select fax documents from the main unit memory  
Select fax documents from the SD Memory Card  
)
Reading-out dial  
The unit announces the number dialed in Japanese, when you make a call with the main unit.  
To cancel the reading-out dial  
)
(Select  
なし  
10  
Automatic dialing on the main unit  
Storing names and telephone  
numbers in the phonebook  
Making a voice call using the  
phonebook  
1
2
Press  
(Phonebook).  
Press  
(Search button) repeatedly until the  
desired name is displayed.  
3
Lift the handset.  
Editing a stored name or number  
in the phonebook  
1
Press  
(Phonebook).  
1
2
Press  
(Phonebook).  
“XXX” shows the remaining  
station numbers you can  
store.  
電話帳空き ×××  
Press  
(Search button) repeatedly until the  
登録は  
登録  
You can program up to  
150 stations, including  
4 pre-programmed stations.  
desired name is displayed.  
検索は  
,
3
4
Press  
(Edit).  
Edit the name (see the table on page 9 for  
instructions).  
2
3
Press  
(Register).  
If you do not need to edit the name, skip to step 5.  
5
6
Press  
(Set).  
Enter the name, up to 20 characters (see the table on  
page 9 for instructions).  
Edit the kana.  
If you do not need to edit the kana, skip to step 7.  
4
5
Press  
(Set) 2 times.  
7
8
Press  
(Set).  
Enter the telephone number, up to 24 digits.  
Edit the telephone number.  
If you do not need to edit the telephone number,  
To correct a mistake, press  
(Erase).  
skip to step 9.  
9
Press  
(Set).  
6
7
8
Press  
(Set).  
10Edit the group number.  
Enter the group number (  
to  
).  
If you do not need to edit the group number,  
skip to step 11.  
Press  
(Set).  
11Press  
(Set).  
To program other items, repeat steps 3 to 8.  
12Press  
(Stop).  
9
Press  
(Stop) to exit the program.  
11  
Automatic dialing on the main unit  
Storing names and telephone  
numbers in the speed dialer  
Making a voice call using the  
speed dialer  
You can store up to 9 names and telephone numbers  
which are stored in the phonebook. The dialing buttons  
(
to  
) function as memory stations.  
1
2
3
Press  
(Speed dialer).  
1
2
Press  
(Speed dialer).  
Press the memory station number (  
Lift the handset.  
to  
).  
Press the memory station number (  
to  
).  
Example: speed dialer 1  
短縮  
1
未登録  
Memory station number  
3
4
Press  
Press  
(Register).  
Erasing a stored name and  
number in the speed dialer  
(Search button) repeatedly until the  
desired name is displayed.  
1
2
3
4
Press  
(Speed dialer).  
5
6
Press  
(Set).  
To program other items, repeat steps 2 to 5.  
Press the memory station number (  
to  
).  
Press  
(Stop) to exit the program.  
Press  
Press  
(Erase), then press  
(Yes).  
(Stop) to exit the program.  
12  
Automatic dialing on the portable handset (KX-FKN515)  
Storing names and telephone  
numbers in the phonebook  
Making a voice call using the  
phonebook  
1
2
Press  
(Phonebook).  
Press  
(Search button) repeatedly until the  
desired name is displayed.  
3
Press (Talk).  
Editing a stored name or number  
in the phonebook  
1
2
Press  
(Phonebook).  
1
2
Press  
(Phonebook).  
検索は  
,
を押  
Press  
(Search button) repeatedly until the  
desired name is displayed.  
Press  
.
3
4
Press  
.
“XXX” shows the remaining  
station numbers you can  
store.  
名前  
Edit the name (see the table on page 9 for  
instructions).  
空き ×××  
You can program up to  
150 stations, including  
4 pre-programmed stations.  
If you do not need to edit the name, skip to step 5.  
5
6
Press  
.
3
Enter the name, up to 20 characters (see the table on  
page 9 for instructions).  
Edit the kana.  
If you do not need to edit the kana, skip to step 7.  
4
5
Press  
2 times.  
7
8
Press  
.
Enter the telephone number, up to 24 digits.  
Enter the correct telephone number.  
To correct a mistake, press  
(Flash/Erase).  
If you do not need to edit the telephone number,  
skip to step 9.  
6
7
8
Press  
.
9
Press  
.
Enter the group number (  
to  
).  
10Edit the group number.  
If you do not need to edit the group number, skip to  
Press  
.
step 11.  
To program other items, repeat steps 3 to 8.  
11Press  
12Press  
.
9
Press  
(Off) to exit the program.  
(Off) to exit the program.  
13  
Intercom  
An intercom is available between the portable handsets or between the main unit and portable handset(s).  
Using the main unit:  
Using the portable handset (KX-FKN515):  
1
For single portable handset users  
1
For single portable handset users  
Press (Intercom).  
1 Lift the handset.  
電話番号  
2 Press  
(Intercom).  
For multiple portable handset users  
1 Press (Intercom).  
子機1 呼出中  
2 Call the main unit and/or portable handset(s) in  
the following ways:  
For multiple portable handset users  
1 Lift the handset.  
To call a specific portable handset, press the  
portable handset number (  
you want to call.  
to  
) which  
2 Press  
(Intercom).  
3
Call the portable handset(s) in the following ways:  
To call a specific portable handset, press the  
To call the main unit, press  
.
To call the main unit and all the portable  
handsets, press  
portable handset number (  
you want to call.  
to  
) which  
.
2
3
Start talking.  
To call all the portable handsets, press  
.
内線通話中  
Press  
(Off) to end the intercom call.  
2
3
Start talking.  
Example :  
子機1 内線通話中  
Replace the handset to end the intercom call.  
14  
Sending faxes  
Sending a fax manually  
Sending a fax using automatic  
dialing  
Document  
Document  
Document cover  
F
A
CE UP  
F
A
CE UP  
Document  
guides  
Using the phonebook  
1
2
3
Open the document cover, and adjust the width of the  
document guides to the size of the document.  
1
Insert the document (up to 5 pages) FACE UP until a  
single beep is heard.  
2
3
Press  
(Phonebook).  
Insert the document (up to 5 pages) FACE UP until a  
single beep is heard.  
Press  
(Search button) repeatedly until the  
desired name is displayed.  
If necessary, press  
(Resolution) repeatedly to  
select the desired setting (see below).  
4
Press  
(Fax).  
4
5
6
Press  
(Fax).  
The unit will start fax transmission.  
Using the speed dialer  
Dial the fax number.  
1
Insert the document (up to 5 pages) FACE UP until a  
single beep is heard.  
Press  
(Fax).  
The unit will start fax transmission.  
2
3
4
Press  
(Speed dialer).  
Press the memory station number (  
to  
).  
Press  
(Fax).  
The unit will start fax transmission.  
To select the resolution  
Select the desired resolution according to the type of document, by pressing  
(Resolution) repeatedly.  
(Standard) for printed or typewritten originals with normal-sized characters.  
ふつう字  
小さい字  
(Fine) for originals with minute printing.  
(Photo) for originals containing photographs.  
写真  
15  
Receiving faxes  
You can select beforehand whether to receive faxes by  
Using the portable handset (KX-FKN515):  
“Receive in memory” or “Receive on recording paper”.  
Receive in memory :  
(Default setting)  
The received fax will be  
stored in the main unit  
memory.You can check the  
contents on the display, then  
print them if necessary.  
Receive on  
:
The received fax will be  
recording paper  
printed on recording paper.  
Setting/canceling “Receive in memory”  
Press (Receive in memory), then  
(Changes each time they are pressed.)  
1
2
When you hear a ring, lift the portable handset from  
the charger to answer the call.  
(Yes).  
If the portable handset is not set on the charger,  
press  
(Talk).  
When:  
– document reception is required,  
– a fax calling tone (slow beep) is heard, or  
– no sound is heard,  
press  
.
: Receive in memory  
With no display: Receive on recording paper  
3
4
Press  
(Search button) repeatedly until the  
” is displayed, then press  
ファクス受信  
.
Receiving a fax manually  
(AUTO ANSWER off)  
Press  
.
Using the main unit:  
The main unit will start fax reception.  
Receiving a fax automatically  
(AUTO ANSWER on)  
light on  
1
2
When you hear a ring, lift the handset to answer the  
call.  
When:  
1
2
If the  
(Auto answer) light is off, turn it on by  
– document reception is required,  
– a fax calling tone (slow beep) is heard, or  
– no sound is heard,  
pressing  
.
When receiving a call, the unit will receive a fax  
document or record a voice message automatically  
depending on the caller’s request.  
press  
(Fax), then replace the handset.  
The unit will start fax reception.  
16  
Receiving faxes  
Display when faxes are received  
in memory  
Viewing faxes stored in memory  
When new faxes are received in memory,  
Fax list) will light on.  
(Call/  
It will also light on when a call is missed.  
(For Number Display service users.)  
Even if an SD Memory Card is inserted, new faxes will  
be received in the main unit memory. (To save the faxes  
to the SD Memory Card, see page 22.)  
1
2
Press  
Press  
button) to select a  
fax to display.  
(Call/Fax list), then  
(Fax list).  
light on  
means unread message  
means this message has  
not been saved to any  
SD Memory Cards  
(Search  
未読未保存  
1/   
7
10  
1
1234  
松下太郎  
5
0 9 8 7 6 5 4 3 2 1  
3
4
Press  
(Display) to view the fax  
The number of faxes stored  
in the main unit memory  
is displayed.  
(see below for detail).  
To print the displayed page,  
press  
(Print a Page).  
Example :  
To view other faxes, press  
(Return) and repeat  
steps 2–3. To exit the program, press  
(Stop).  
Information about display  
To scroll display contents  
(Example)  
Up  
The display contents can be scrolled  
up, down, left and right.  
Left  
Right  
Down  
To enlarge or reduce content  
Press  
(Turn/Zoom)  
(Zoom) to enlarge or reduce the display content in the following order:  
Normal Enlarge(double size) Reduce(half size) Normal…  
Scroll pages  
To show the next page: Press  
(Scroll page)  
(Scroll page)  
(Example)  
(Next page).  
(Previous page).  
To show the previous page: Press  
To turn display contents  
Press  
(Turn/Zoom)  
(Turn).  
17  
Receiving faxes  
Operating the built-in  
answering device  
Printing a specific fax stored in  
memory  
Recording your own greeting  
message  
1
2
Press  
list).  
(Call/Fax list), then press  
(Fax  
You can record your own greeting message. When  
receiving a call, it will be played to callers instead of the  
pre-recorded Japanese greeting message.  
Press  
(Search button) to select the desired fax to  
(Print).  
print, then press  
1
Press  
(Function).  
3
After printing, the following is displayed.  
Do you delete the  
印刷した内容  
自作応答録音  
printed contents ?  
消去しますか  
(Yes).  
(No).  
2
Press  
Press  
.
If you want to delete the fax, press  
If you want to hold the fax, press  
3
4
(Set).  
4
Press  
(Stop).  
Lift the handset.  
Deleting a specific fax stored in  
memory  
5
6
Press  
(Start) and speak your greeting message  
after a beep, up to 16 seconds, to the handset.  
1
Press  
list).  
(Call/Fax list), then press  
(Fax  
Press  
handset.  
(End) or  
(Stop) and replace the  
未読未保存  
1/   
7
10  
松下太郎  
1
1234  
5
Your greeting message will be played back  
automatically.  
0 9 8 7 6 5 4 3 2 1  
2
Press  
(Search button) to select the desired fax  
3to delete.  
Press  
(Delete).  
Erasing your own greeting  
message  
消去しますか  
1
2
Press  
(Function).  
Do you delete the fax ?  
消去しますか  
自作応答消去  
or  
Press  
.
未読の内容  
があります  
Do you delete the new fax ?  
3
4
Press  
(Set).  
4
5
If you want to delete the fax, press  
(Yes).  
(No).  
If you want to hold the fax, press  
Press  
(Yes).  
The pre-recorded Japanese greeting message will  
be played when you receive a call.  
6If you want to delete other faxes, repeat steps 2–4.  
Press  
(Stop).  
18  
Operating the built-in answering device  
Activating the answering device  
Listening to all of the recorded  
messages  
light on  
/flash  
Press  
recorded.  
(Playback) when new messages are not  
When new messages are recorded, only the new  
messages will be played back.  
After the messages are played back, the following will be  
displayed.  
すべて消去しますか  
To erase the messages, press  
To save the messages, press  
(Yes).  
(No).  
If an SD Memory Card is available(inserted), voice  
messages will be recorded to the SD Memory Card.  
(See page 22.)  
Erasing a specific message  
1
2
Turn the  
(Auto answer) light on by pressing  
.
Press  
(Erase) while listening to the message you  
(Yes).  
want to erase, then press  
When receiving a call, a greeting message will be  
played and the unit will record a voice message.  
To record your own greeting message, see page 18.  
Erasing all of the recorded  
messages  
Listening to recorded messages  
When new messages are recorded, the  
answer) light will flash.  
1
2
3
Press  
(Function).  
(Auto  
Press  
.
Press  
to listen to recorded messages.  
すべて消去しますか  
Press  
(Set).  
再生中  
      
     
 
1/   
2件  
10  
2
1005  
means recorded  
date and time : Thursday, Oct. 2, 10:05  
When not using an SD Memory Card, press  
(Yes).  
If an SD Memory Card is inserted, the following  
variations may occur:  
When using an SD Memory Card, delete messages as  
follows:  
: Playing a message in the SD Memory  
Card.  
SD  
To erase the main unit memory messages  
and the SD Memory Card messages,  
: Playing a message in the main unit that  
is not saved to any SD Memory Card.  
未保存  
Press  
(Main unit+SD)  
(Yes).  
Blank  
: Playing a message in the main unit that  
has been saved to an SD Memory Card.  
To erase the main unit memory messages,  
Press (Main unit) (Yes).  
To erase the SD Memory Card messages,  
Press (SD card) (Yes).  
After the messages are played back, the following will be  
displayed.  
To erase the messages, press  
To save the messages, press  
.
再生した用件を  
消去しますか  
.
19  
Night mode  
Operating the built-in  
answering device  
Turn on the night mode  
Operating the answering device  
from a remote location  
light on  
light on  
Press  
(Night mode) for about 3 seconds.  
Preparation: Programming the remote operation ID  
is displayed and  
lights on.  
1. Press  
(Function).  
When a call is received during night mode, the unit  
will handle the call silently, either by storing the  
received fax into memory or by recording the caller’s  
message.  
2. Press  
.
3. Enter any 4-digit number (remote operation ID) except  
or #.  
留守電暗証番号  
1234  
?
Night mode allows you to select a block of time  
during which the unit will not ring for outside calls  
or make sounds when you change the settings.  
This feature is useful when you do not want to be  
disturbed, for example, while sleeping.  
Example :  
4. Press  
(Set).  
(Stop).  
5. Press  
Listening to recorded messages  
When new messages are recorded, the following will be  
displayed.  
新しい用件が  
録音されました  
(Playback) to listen to recorded messages.  
Operation: Listening to a recorded message from a  
remote location  
Press  
Turn the  
(Auto answer) light on before you go out.  
After the messages are played back, the following will be  
Remote operations are available only from a touch tone  
telephone.  
displayed.  
再生した用件を  
消去しますか  
1. Call your unit.  
2. Enter the remote operation ID during the greeting  
To erase the messages, press  
(Yes).  
(No).  
message.  
To save the messages, press  
2
3. Press or wait 4 seconds.  
Only the new recorded messages will be played  
Printing received fax documents  
back.  
4
To listen to all the recorded messages, press  
after the new messages have been played back.  
When new faxes are received, the  
(Call/Fax  
list) light will turn on.  
To print the faxes, see "Printing a specfic fax stored in  
memory" on page 18.  
Turn off the night mode  
Press  
(Night mode) for about 3 seconds.  
20  
Call block  
Blocking the incoming calls  
Using the main unit:  
Using the portable handset (KX-FKN515):  
To block a call using a message  
While the unit is ringing, press  
OR  
(Block).  
While you are on an incoming call, press  
(Block),  
then press  
(Voice).  
1
2
3
Press  
an incoming call.  
while the unit is ringing or while you are on  
The unit announces a message to the caller  
2 times, then hangs up automatically. The message  
is announced in Japanese and means  
Press  
(Search button) repeatedly until the  
“We’re sorry, but your call cannot be connected..  
通話拒否 ” is displayed.  
To block a call using chimes  
Press  
2 times.  
1
2
While you are on an incoming call, press  
(Block).  
The unit announces a message to the caller  
2 times, then hangs up automatically. The message  
is announced in Japanese and means  
Press  
(Chime).  
Chimes are heard by the caller.  
“We’re sorry, but your call cannot be connected..  
3
Tell the caller that a visitor has come and hang up.  
For Number Display service subscribers  
If you subscribe to Number Display service, the message  
heard by the caller will change according to the caller’s  
situation.  
For Number Display service subscribers  
If you subscribe to Number Display service, the message  
heard by the caller will change according to the caller’s  
situation.  
Example :  
If the caller requested not to send caller’s  
information, the message heard by the caller will  
change to mean  
Your phone number is blocked by service provider.  
Please call again with adding ‘186’ to the beginning  
of the phone number..  
Example :  
If the caller requested not to send caller’s  
information, the message heard by the caller will  
change to mean  
Your phone number is blocked by service provider.  
Please call again with adding ‘186’ to the beginning  
of the phone number..  
When the following is displayed after operating step 1  
to 3, you can set the unit to block the call from the same  
telephone number.  
When the following is displayed after pressing  
(Block), you can set the unit to block the call from  
the same telephone number.  
To block the call, press  
.
迷惑設定  
しますか  
迷惑設定しますか  
To cancel blocking, press  
.
To block the call, press  
To cancel blocking, press  
(Yes)  
.
(No)  
.
When the following is displayed,  
press to cancel.  
拒否設定  
しますか  
When the following is displayed, press  
cancel.  
(No) to  
拒否設定しますか  
21  
SD Memory Card  
Compatible SD Memory Card  
Listening to voice messages in  
the SD Memory Card  
SD Memory Card (2 GB or less)  
SDHC Memory Cards are not compatible with this unit.  
1
2
Press  
(SD Card).  
SD indicator  
Press  
(Search button) repeatedly until the following  
The SD indicator lights up  
is displayed.  
未保存用件をSDへ保存する  
SDの用件一覧  
未保存ファクスをSDへ保存する  
SDのファクス一覧  
if an SD Memory Card has  
been inserted.  
The SD indicator flashes  
while reading or writing to  
新規  
1
1/   
1234  
3件  
the SD Memory Card.  
SD indicator  
3
Press  
(Set).  
10  
松下太郎  
Never remove the card while the indicator is flashing.  
0 9 8 7 6 5 4 3 2 1  
Wednesday, October 1st, 12:34  
(Date and time of recording)  
Inserting the SD Memory Card  
4
5
Press  
(Search button) to select the desired  
Open the SD Memory Card cover, and insert the SD  
Memory Card in  
Chipped corner  
the direction of  
the arrow.  
message.  
Press  
(Playback).  
Deleting voice messages from  
the SD Memory Card  
Label side  
SD Memory Card cover  
1
2
Press  
(SD Card).  
Removing the SD Memory Card  
Open the cover, push the  
SD Memory Card in the  
direction of the arrow,  
then pull it out.  
Press  
(Search button) repeatedly until the following  
is displayed.  
未保存用件をSDへ保存する  
SDの用件一覧  
未保存ファクスをSDへ保存する  
SDのファクス一覧  
3
4
Press  
(Set).  
SD Memory Card  
Press  
(Search button) to select a message to  
delete.  
Saving unsaved voice messages  
to the SD Memory Card  
5
Press  
(Delete)  
(Yes).  
1
2
Press  
(SD Card).  
Saving unsaved faxes to SD  
Memory Card  
Press  
(Search button) repeatedly until the following  
is displayed.  
1
2
Press  
(SD Card).  
未保存用件をSDへ保存する  
SDの用件一覧  
未保存ファクスをSDへ保存する  
SDのファクス一覧  
Press  
(Search button) repeatedly until the following  
is displayed.  
未保存用件をSDへ保存する  
SDの用件一覧  
未保存ファクスをSDへ保存する  
SDのファクス一覧  
3
4
Press  
Press  
(Set).  
(Yes).  
3
4
Press  
Press  
(Set).  
(Yes).  
22  
SD Memory Card  
5
When the SD indicator stops flashing and remains on,  
press (Stop).  
3
4
Press  
(Set).  
Press  
(Search button) to select the desired fax to  
delete.  
Viewing/Printing faxes in the SD  
Memory Card  
5
6
Press  
Press  
(Delete).  
(Yes).  
1
2
Press  
(SD Card).  
Press  
(Search button) repeatedly until the following  
Displaying documents/Listening  
voice messages on a PC  
is displayed.  
未保存用件をSDへ保存する  
SDの用件一覧  
未保存ファクスをSDへ保存する  
SDのファクス一覧  
OS environment  
Microsoft® Windows® 98 operating system  
Microsoft® Windows® Millenium Edition operating system  
Microsoft® Windows® 2000 operating system  
Microsoft® Windows® XP operating system  
Microsoft® Windows Vista® operating system  
1/   
1234  
3
3
Press  
(Set).  
10  
1
松下太郎  
5
0 9 8 7 6 5 4 3 2 1  
Wednesday, October 1st, 12:34  
(Date and time of reception)  
Image file : (TIFF format)  
Folder : \PRIVATE\MEIGROUP\PCC\FAX\DOC  
4
5
Press  
(Search button) to select a fax to view/print.  
Audio file : (WAVE format : It can be played using  
Windows Media® Player or QuickTime.)  
Folder : \PRIVATE\MEIGROUP\PCC\FAX\REC  
To view the fax, press  
(Display).  
(Print).  
To print the fax, press  
Formatting SD Memory Card  
To use an SD Memory Card formatted on a PC or other  
device, format it as follows.  
Formatting the SD Memory Card deletes all stored data;  
this data cannot be recovered.  
After printing:  
If you want to delete the fax, press  
(Yes).  
(No).  
If you want to hold the fax, press  
1
2
Press  
Press  
(SD Card).  
Deleting faxes from the SD  
Memory Card  
(Search button) repeatedly until the following  
is displayed.  
SDの電話帳を読み込む  
SDの残量表示  
1
2
Press  
(SD Card).  
(Search button) repeatedly until the following  
SDを整理する  
SDをフォーマットする  
Press  
3
4
Press  
Press  
(Set).  
(Yes).  
is displayed.  
未保存用件をSDへ保存する  
SDの用件一覧  
未保存ファクスをSDへ保存する  
SDのファクス一覧  
Trademarks  
Microsoft, Windows, Windows Vista and Windows Media are either registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other countries.  
QuickTime is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.  
All other trademarks identified herein are the property of their respective owners.  
23  
Specifications  
KX-PW607DL  
KX-PW607DW  
Portable handset  
(KX-FKN515)  
Main unit  
Battery charger  
Ni-MH battery  
Power supply  
AC 100 V (50 Hz/60 Hz)  
(Part no. KX-FAN51)  
DC 3.6 V, 650 mAh  
AC 100 V (50 Hz/60 Hz)  
Transmission: Approx. 10 W  
Reception:  
Copy:  
Stand by:  
Approx. 13 W  
Approx. 18 W  
Approx. 1.2 W  
• Charging:  
Approx. 1.2 W  
• Stand by:  
Power  
consumption  
(When the F-net service is not in use.)  
Maximum(*1): Approx. 130 W  
Approx. 0.5 W  
Approx. 86 X 296 X 191 mm  
(without handset, projections)  
Approx. 265 X 296 X 231 mm  
(recording paper tray opened,  
without handset, projections)  
Dimensions  
(H x W x D)  
Approx. 171 X 44.5 X 33.5 mm Approx. 34 X 72.5 X 100.5 mm  
Approx. 2.5 kg  
(10 m ink film installed)  
Approx. 157 g  
Approx. 160 g  
(battery installed)  
Mass (Weight)  
Operating  
environment  
5 °C – 35 °C, 45 % – 85 % RH (Relative Humidity)  
KX-PW607DL  
KX-PW607DW  
Applicable line  
Main unit  
Public Switch Telephone Network (Tone/Pulse), F-Net, NCC Lines  
DC resistance  
275 W  
Compatibility  
G3 compatible  
Document size  
A4–A5 (Max. 210 mm in width, Max. 600 mm in length)  
208 mm (A4)  
Effective scanning size  
Effective printing size  
Transmission time  
Modem speed  
202 mm (A4 size plain paper)  
Approx. 15 s/page (Original mode) (*2)  
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic fallback  
64-level  
Halftone level  
Horizontal: 8 pels/mm  
Vertical : 7.7 lines/mm (Fine/Photo), 3.85 lines/mm (Standard)  
Scanning density  
Scanner type  
Contact image sensor  
Printer type  
Thermal transfer printing on plain paper  
Modified Huffman (MH), Original mode  
A4: 210 mm x 297 mm (Plain paper)  
Data compression system  
Recording paper size  
Greeting message: Digital recording system (up to 16 sec)  
Pre-recording greeting message  
Answering device  
ICM Recording:  
Digital recording system (Approx. 12 min. in total) (*3)  
Image data(such as received faxes)  
: Max.100 data/Max.approx.5000 sheets (*4)  
using 2 GB SD Memory Card  
SD Memory Card capacity  
Audio data(such as recorded messages): Max.500 data/Max.approx.68 hours  
using 2 GB SD Memory Card  
FAT16/FAT12  
SD Memory Card format  
Max. Approx. 50 pages (Only receiving fax etc.) (*4)  
Max. Approx. 12 min. (Only recording message) (*3)  
Main unit memory capacity  
*1 When copying a 100 % black document.  
*2 Transmission speed is based on an A4-size document of 700 characters sent in standard resolution at 9,600 bps. The  
actual transmission speed depends upon the contents of the page, resolution, telephone line conditions and capability  
of the other party’s machine.  
*3 If there is a silent pause, the total recording time will be longer.  
*4 The memory capacity is based on an A4-size document of 700 characters.  
C
PNQX1298ZA FK0108MH0  
2008 Panasonic Communications Co., Ltd. All Rights Reserved.  

Oki Mc160n User Manual
Ricoh Type 3260 User Manual
Royal Sovereign Arp 9009tl User Manual
Samsung Mh09zv 18 User Manual
Schumacher 1200a User Manual
Toshiba All In One Printer 3510c User Manual
Toshiba Ras 13ukv E2 User Manual
Trion Mv9 User Manual
Vermont Casting Cfm Specialty Air Conditioner Msz D36na User Manual
Winix Plasmawave Wac 9000 User Manual