Panasonic Dp 6010 User Manual

Digital Imaging Systems  
Operating Instructions  
(For Copier & Network Scanner)  
Model No.  
DP-3510/4510/6010  
J
?
I
Before operating this equipment, please read the instructions completely and keep these operating instructions  
for future reference.  
English  
Useful Office Functions  
Copier  
Copy up to A3 size.  
1
Capable of copying text/photos/halftone originals.  
Network Printer  
2
3
4
Digital printer controller standard, printer resolution  
300 or 600 dpi.  
Network Scanner  
Black & White original scanner can be used when  
optional Network Scanner Kit (DA-NS600) is  
installed.  
Scanning resolution up to 600 dpi.  
Application Software  
Document Manager  
Document Viewer  
Document Network Scanner*  
Utilities (Network Status Monitor, Phone Book  
Editor, Device Configuration Editor)  
Document Network Scanner is only available  
when the optional Network Scanner Kit (DA-  
NS600) is installed.  
DP-3510/4510/6010 Operating Instructions  
This copier includes operating instruction manuals, please use the correct manual when an operator  
intervention is necessary.  
<Copier & Network Scanner> Use the information provided in this manual whenever a copier function  
requires intervention. For example: how to make copies, add paper,  
replace the toner bottle, etc..  
<Printer>  
Use the information provided on the enclosed CD for an explanation of  
how to use as a Network Printer, Network Scanner, Edit Directory Dialling  
&
<Other Advanced Functions> Feature, Device Settings, Network Status Monitor, and/or Document  
Management System.  
3
Operation Chart  
Common Features and Usage  
I Basic Operation  
Turn the main  
Power Switch On  
Original  
(Located on the  
back of the  
Copier)  
B4·FLS  
Load Paper  
Turn the Power  
Switch On  
1 2 3 4 5  
Press the  
COPY SIZE  
COPY Key (Reduction/  
Enlargement Only)  
Number  
of Copies START  
Press  
Place the Original(s)  
(Up to 70/i-ADF)  
I Position of the Original  
From i-ADF  
From Platen  
Original Guide  
CPlace originals face down on the  
platen or face up on the i-ADF.  
CIf the original is not positioned  
properly, a portion of the original  
may not be copied.  
CFor originals smaller than A5 size,  
position the original within the A5  
area and select A5.  
i-ADFTray  
Original Guides  
Adjust to the originals width  
I Commonly Used Functions and Operating Procedures  
Full Size  
Makes a copy that is the same  
size as the original  
(See page 16)  
(See page 18)  
1 2 4 5  
Reduction or Enlargement  
Copies the original at a fixed  
reduction or enlargement ratio  
1 2 3 4 5  
I Memory Capacity  
If the memory becomes full during original scanning, the message Cannot Complete / Job  
Exceeds Memory Capacitywill be displayed on the LCD. If this occurs, follow the instructions  
on the LCD.  
When additional memory is required, consult with an authorised servicing dealer.  
CIf the fusing temperature drops excessively on the DP-4510/6010 during a multi-copy  
cycle, there is a remote possibility that the copying speed will be reduced. The copying  
speed will automatically return to normal when the fusing temperature rises enough to  
ensure good fusing performance.  
NOTE  
4
Operation Chart  
Touch Panel Display  
I Function Categories  
Tab Name  
Features  
CInitial Ready to copyscreen.  
See Page  
COriginal Mode, Exposure Control and Paper Tray  
selection.  
A
BASIC MENU  
16-26  
CJob selection (Tandem/Remote, Proof Set and etc.).  
CReserved Job(s) verification.  
2-SIDED/ORIG. \ C2-Sided, 2 Page, Booklet Copy Mode, Multi-Size  
27  
B
C
COPY  
Feed and/or SADF function selection.  
CElectrical Sort Mode and/or optional Finisher  
SORT/FINISH  
37, 84, 89, 94  
selection.  
CZoom Copy Mode or Creative Features (Book, Edge,  
Margin, Stamping, Centering, Image Repeat or  
Inverse Mode) selection.  
D
ZOOM/EFFECTS  
38  
INSERTION/  
OVERLAY  
CInsertion, OHP Interleaving, Overlay or File Edit  
46  
54  
E
F
Mode selection.  
JOB MEMORY  
CJob Memory Mode selection.  
I Touch Panel Display Brightness Adjustment  
To adjust the brightness of the Touch Panel display, press and while holding down the C”  
(CLEAR) key, keep pressing the ORIGINAL SIZE/A3or the COPY SIZEkeys until the desired  
brightness is achieved.  
ORIGINAL SIZE/A3 :Dimmer  
COPY SIZE  
:Brighter  
CDuring the copy operation and after making copies, the fan motor may start  
spinning. This is a normal operation and is used to cool  
down the copier.  
NOTE  
CIf you are not going to use the copier for long periods  
of time, turn the Main Power Switch on the Back and  
the Power Switch on the Left Side of the machine to  
the OFF position.  
5
Energy Star  
As an ENERGY STAR® Partner, Panasonic has determined that this product meets the  
ENERGY STAR® guidelines for energy efficiency.  
This voluntary program specifies certain energy consumption and usage standards.This  
product will automatically power downafter a specified period of non-use. The use of this  
ENERGY STAR® compliant product will reduce energy consumption and ultimately benefit the  
environment.  
The default functions can be adjusted depending on your office requirements.  
Please ask your authorised Panasonic dealer for more details.  
6
Table of Contents  
Getting To KnowYour Machine  
Operation Chart .............................................................................................................................. 4  
I Common Features and Usage..............................................................4  
I Touch Panel Display .............................................................................5  
Before Starting  
Precautions ..................................................................................................................................... 9  
Control Panel ................................................................................................................................ 13  
I Touch Panel Display ...........................................................................14  
Making Copies  
Basic Menu ................................................................................................................................... 16  
I Full Size Copying................................................................................16  
Notice for i-ADF ..................................................................................17  
Using the Sheet Bypass .....................................................................17  
I Reduction or Enlargement Copying ....................................................18  
I Proof Copying .....................................................................................18  
I Tandem/Remote Copying ...................................................................20  
I Tandem/Remote Copy Settings (Registering) .....................................21  
I Tandem/Remote Copy Settings (Registration) ....................................22  
I Tandem/Remote Copy Settings (Editing) ............................................23  
I Tandem/Remote Copy Settings (Deleting) ..........................................24  
I Job Queue ..........................................................................................25  
I Completion Notice ..............................................................................26  
2-Sided/Original \Copy.............................................................................................................. 27  
I 1 \2, 2 \1, 2 \2 Copy..................................................................28  
I Book \2 Copy ..................................................................................29  
I 2 Page Copy .......................................................................................30  
I N in 1 Copy.........................................................................................31  
I Booklet Copy ......................................................................................33  
I Multi-Size Feeding ..............................................................................34  
I SADF Mode ........................................................................................35  
Sort/Finish .................................................................................................................................... 37  
I Sort/Finish Button ...............................................................................37  
Zoom/Effects................................................................................................................................. 38  
I Zoom/Effects Button ...........................................................................38  
I Zoom Copying ....................................................................................39  
I Auto Zoom Copying ............................................................................40  
I Edge/Book/Margin ..............................................................................41  
I Stamping (Page Numbering) ..............................................................42  
I Stamping (Date Stamp) ......................................................................43  
I Stamping (Issue Number Stamping) ...................................................44  
I Centering/Image Repeat/Inverse Copy ...............................................45  
Insertion/Overlay .......................................................................................................................... 46  
I Insertion/Overlay Button .....................................................................46  
I Cover ..................................................................................................47  
I Page Insertion ....................................................................................48  
I OHP Interleaving ................................................................................49  
I Presentation .......................................................................................50  
I Overlay ...............................................................................................51  
I File Edit ..............................................................................................52  
I Form Overlay......................................................................................53  
Job Memory .................................................................................................................................. 54  
7
Table of Contents  
Making Copies  
Other Features .............................................................................................................................. 55  
I Concurrent Copying............................................................................55  
I Energy Saver/Interrupt........................................................................56  
I Skyshot Mode.....................................................................................57  
Combined FunctionTable ............................................................................................................ 59  
Function ........................................................................................................................................ 60  
I General Functions ..............................................................................61  
I Copier Settings ...................................................................................62  
I Scanner Settings ................................................................................64  
I Printer Settings ...................................................................................65  
I General Functions for Key Operator ...................................................67  
I Copier Settings for Key Operator ........................................................71  
I Printer Settings for Key Operator ........................................................74  
I Function Setting for Key Operator.......................................................75  
Options  
Accessories .................................................................................................................................. 82  
I Components .......................................................................................82  
I
2 Bin Finisher (DA-FS600)/2 Bin Saddle-Stitch Finisher (DA-FS605) ..... 83  
I 2 Bin Finisher (DA-FS330) ..................................................................88  
I 1 Bin Saddle-Stitch Finisher (DA-FS355)............................................92  
Network Scanner (Option) ........................................................................................................... 97  
I Document Scanning ...........................................................................97  
I Address Book .....................................................................................98  
I Adding a New PC’s IP Address...........................................................98  
I Editing the Address Book .................................................................100  
I Adding the DD Server IP Address ....................................................103  
Problem Solving  
Problem Solving ......................................................................................................................... 105  
I Adding Paper (k) .............................................................................105  
I Replacing the Toner Bottle (?) .........................................................107  
I Removing a Misfed Paper.................................................................108  
Troubleshooting.......................................................................................................................... 119  
I Before Calling Service ......................................................................119  
I Replacing the Battery .......................................................................121  
Others  
Specifications ............................................................................................................................. 122  
Options and Supplies................................................................................................................. 126  
Index ............................................................................................................................................ 128  
8
Precautions  
For Your Safety  
I Laser Safety  
LASER SAFETY  
This unit employs a laser. Only qualified service personnel should  
attempt to service this device due to possible eye injury.  
CAUTION:  
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION EXPOSURE.  
I Caution Labels  
9
Precautions  
Handling  
I Do not look directly at the exposure lamp when  
copying.  
I Do not turn the power switches Off or open the front  
panel during copying.  
CDo not drop paper clips or other metal objects into  
the copier.  
Toner and Paper  
I Store toner, drum and paper in cool areas with low  
humidity.  
C
Use high quality 60 - 90 g/m2 (Sheet Bypass:  
55 - 133 g/m2) paper.  
CFor optimum performance, it is recommended that  
only Panasonic Brand supplies are used in the  
copier.  
Ventilation  
I The copier should be installed in a well-ventilated  
area to minimize the ozone density in the air.  
10  
Precautions  
Installation  
I The copier should not be installed in areas with the  
following conditions:  
CExtremely high or low temperature and humidity.  
Ambient conditions Temperature: 10 30°C  
Relative humidity: 30 80 %  
CWhere temperature and humidity can change  
rapidly, causing condensation.  
CDirect exposure to sunlight.  
CDirectly in the air conditioning flow.  
CIn areas of high dust concentration.  
CIn areas of poor ventilation.  
CIn areas with chemical fume concentration.  
CIn areas with extreme vibration.  
CWith unstable or uneven conditions (floors, etc.).  
FORYOUR SAFETY  
I The maximum power consumption is 1.45 kW.  
A properly wired (grounded), dedicated, 6.5A, 220-240V AC outlet is required. Do not use an  
extension cord.  
Caution Note: Disconnect from the mains supply before removing covers.  
CAUTION  
CTHIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS  
INCORRECTLY REPLACED.  
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES  
ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.  
11  
Precautions  
Installation  
For U.K.  
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.  
A 13 amp fuse is fitted in this plug.  
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13  
amps and that it is approved by ASTA or BSI to BS1362  
Check for the ASTA mark 7 or the BSI mark 6 on the body of the fuse.  
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is  
replaced.  
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.  
A replacement fuse cover can be purchased from your local Panasonic Dealer.  
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET INYOUR OFFICE  
THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.  
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED  
INTO ANY 13 AMP SOCKET.  
If a new plug is to be fitted please observe the wiring code as shown below.  
If in any doubt please consult a qualified electrician.  
WARNING:THIS APPLIANCE MUST BE EARTHED.  
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:  
Green andYellow: Earth  
Blue  
Brown  
: Neutral  
: Live  
As the colours of the wires in the main lead of this appliance may not correspond with the coloured  
markings identifying the terminals in your plug, proceed as follows:  
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which  
is marked by letter E or by the safety Earth symbol Lor coloured GREEN or GREEN-AND-YELLOW.  
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked  
with the letter N or coloured BLACK.  
The wire which is coloured BROWN must be connected to the terminal in  
the plug which is marked with the letter L or coloured RED.  
How to replace the fuse.  
Open the fuse compartment with a screwdriver and replace the fuse.  
12  
Control Panel  
Touch Panel  
Display  
B4·FLS  
ORIGINAL COPY SIZE  
SIZE Keys Keys  
Touch Panel  
Display  
Keypad  
START  
Key  
No.  
Contents  
COPY Key  
#
CPress when using the unit as a photocopier.  
ENERGY SAVER Key  
CCan save power while the copier is not in use.  
INTERRUPT Key  
CInterrupts other copy or print jobs while making copies.  
FUNCTION Key  
$
%
&
C
Use when changing the paper size, initial values for functions (default values) and key operator settings.  
RESET Key  
(
)
*
+
-
CResets all features to the initial power-on state.  
CLEAR Key  
CClears the copy count in the display.  
STOP Key  
CStops the copy run.  
ALARM LED (RED)  
CLights when trouble occurs.*  
ACTIVE LED (GREEN)  
CLights when machine is active.  
PRINT DATA LED (GREEN)  
CLights when print data receive.  
.
FAX/EMAIL ON LINE LED for optional Facsimile/Internet Fax functions  
Print ON LINE LED for Printer function  
When the machine detects a problem or an alarm status is activated, the  
+Alarm LED lights up or begins to flash.  
NOTE  
LED Lights: Machine detected a trouble status  
ANo paper in the selected tray or toner has run out.  
AMachine detected trouble, such as paper misfeed or jam.  
LED Flashes: Machine detected an alarm status  
ANo paper in the tray. (tray not selected)  
ARunning low on toner etc.  
CThe Control Panel displayed above shows only copier functions. Please refer  
to the appropriate operating instructions for other control panel functions.  
(Refer to page 18 for details on the ORIGINAL SIZE/COPY SIZE Keys.)  
13  
Control Panel  
Touch Panel Display  
B4·FLS  
Touch Panel  
Display  
CUse only soft finger pressure to activate the Touch Panel Display. DO NOT  
USE SHARP OBJECTS such as pens, fingernails etc., as this may damage  
the panel.  
ATTENTION  
14  
Control Panel  
I Touch Panel Display Indications  
See Page  
No.  
Contents  
Warning Indications  
?:AddToner k:Add Paper 2:Call Service B:WasteToner (Call Service)  
--  
#
--  
16  
35  
--  
$
%
&
(
)
*
+
-
.
/
0
1
2
3
4
5
6
7
8
9
:
;
=
?
A
B
Original Icon  
Original Size Indication  
SADF/Multi-Size Feed Mode Indication  
Rotate Mode Indication  
--  
Number of Copies  
120  
--  
Machine / User Error Code Indication (E1-01, U13, etc.)  
Copy Icon  
16  
55  
37  
--  
Copy Size Indication  
Reserve a Job Button  
Finisher Functions Indication  
Machine Outline with Tray Selection  
Paper Level and Size Indication  
Paper Tray Selection Button  
Tandem/Remote Button Indication  
Tandem/Remote Button  
--  
16  
20  
20  
14  
14  
14  
16  
16  
16  
16 - 58  
19  
14  
25  
26  
Density Indicator (7 steps)  
Manual Exposure Select Buttons (Lighter and Darker)  
Original Mode Select Button (Text; Text / Photo; Photo)  
Copy Image and Paper Image Indication  
Copy Ratio Indication  
Original Image Indication  
Function Categories  
Proof Set Button  
Job Settings Button  
Job Queue Button  
Completion Notice Button  
15  
Basic Menu  
Full Size Copying  
I Copying the Same Size Originals (1:1)  
Copy size is automatically selected.  
B4·FLS  
ORIGINAL SIZE Keys Touch Panel Display  
1
2 3  
Number of Copies  
Place the  
Original(s)  
Press START  
(Up to 999)  
I Initial Screen  
(When placing A4 size originals)  
Manual Exposure Select buttons  
(LIGHTER and DARKER)  
Original Mode Select button  
(TEXT;TEXT/PHOTO; PHOTO)  
JOB SETTINGS button  
CEach setting selected will be indicated on the display.  
I Manually Selecting Exposure Control or Original Size  
# Touch the LIGHTER or DARKER button.  
$ Select the Original(s)  
TEXT  
TEXT/PHOTO: Combined originals with text and photo.  
PHOTO :Originals are mainly composed of photo.  
:Originals are mainly composed of text.  
Select the ORIGINAL SIZE  
A4 and A5 size can be switched between Portrait  
and Landscape mode.  
16  
Basic Menu  
I Notice for i-ADF  
Inappropriate Originals  
CPaste-ups  
CPaper with a smooth surface such as glossy CPressure sensitive or carbon backed papers  
and coated papers  
CPaper with excessive curl  
CTransparencies  
CStapled originals  
COriginals with a Lead Edge that is creased, CFreshly printed copies from a laser printer  
folded, punchedor glued”  
When copying the thick Booklet, open the ADF and check the ADF Hinge is returned to original  
angle if ADF rear side is lifted up.  
2
1
I Using the Sheet Bypass  
Copying on Special Paper, etc.  
Sheet Bypass  
Open the Sheet Bypass.  
Pull out the Sheet Bypass Tray  
until it stops.  
# Place the sheets of paper into  
the tray. (Approximately up to  
50 A4 size sheets/80 g/m2)  
Do not load paper above the upper  
limit arrow indicated on Side Guides.  
Insert the paper until it stops.  
$ Adjust the side guides.  
Incorrect adjustment may cause the  
paper to wrinkle, misfeed or skew.  
CDo not feed curled paper through the sheet bypass to avoid misfeed.  
CCertain types of transparency film may not be compatible and may damage  
your machine. Consult with an authorised Panasonic dealer for advice  
regarding non-standard paper types. (Panasonic has tested 3M PP2500”  
transparency film and found it to be compatible.)  
ATTENTION  
17  
Basic Menu  
Reduction or Enlargement Copying  
I Copying with Preset Ratios  
B4·FLS  
1 2  
3 4  
Place the  
Original(s)  
Select the  
COPY SIZE  
Number of  
Copies  
Press START  
Example: Reduction  
ORIGINAL SIZE  
COPY SIZE  
A3  
A4  
The correct ratio is automatically selected.  
Reduction and enlargement ratios (%)  
COPY SIZE  
ORIGINAL  
SIZE  
A3  
B4  
87  
A4 R  
A5  
50  
A3  
B4  
100  
115  
141  
200  
71  
82  
100  
122  
173  
58  
A4 R  
A5  
100  
141  
71  
100  
CWhen changing the paper size, touch  
the PAPERTRAY button.  
CIf the desired copy size is different from the paper size loaded in the paper tray, use  
sheet bypass. (See page 17)  
NOTE  
CPress the RESET key to cancel the reduction or enlargement mode.  
18  
Basic Menu  
Proof Copying  
I Proof Copying  
Allows you to make one proof set, before proceeding to copy a large multi-set with various  
settings.  
B4·FLS  
( )  
1 2 4 3 5  
Place the  
Original(s)  
(Up to 70)  
COPY SIZE  
(Reduction/  
Enlargement  
Only)  
Set function and Proof  
Copying  
Number  
of Copies  
Press  
START  
#Place the Originals on the ADF, adjust the  
settings to your needs, select the number of  
copies desired.  
$Set PROOF SET button.  
%Press START, then one Proof Copy is made.  
CIf the Proof Copy is OK, press theYES button  
and the remaining number of sets will be printed.  
CIf the Proof Copy is NG, press the NO button to  
display the Basic Menu. Adjust the settings to  
your requirements, place the originals back on  
the ADF and press START to make another  
Proof Copy.The process can be repeated until  
the desired results are obtained.  
CPress the PROOF SET button again if the Proof Copying mode was reset.  
CNumbers in parenthesis ( )represent that, an additional step is required to  
activate the feature.  
NOTE  
19  
Basic Menu  
Tandem/Remote Copying  
I (Required installation of optional Hard Disk Drive/DA-HD60, network  
setup(See page 65)and registration of parameter of the user machine(See  
page 21).)  
C
50 % of the total copying set(s) are split between other copiers on the network. (Tandem Copying)  
CAll of the copying sets will be printed on other copiers in the network. (Remote Copying)  
B4·FLS  
( )  
1 2 4 3 5  
COPY SIZE  
(Reduction/  
Enlargement  
Only)  
Place the  
Original(s)  
SetTandem/Remote  
Copying  
Number  
of Copies  
Press  
START  
#Select TANDEM/REMOTE button on  
BASIC MENU.  
$Select Station.  
If the desired Station(Machine Name) is  
not displayed for selection, register the  
Station(Machine Name) according to the  
procedure on the next page.  
%Select TANDEM button or REMOTE  
button.  
&Touch the OK button.  
CThe selected Remote printing copier, must be either DP-6010, DP-4510 or  
DP-3510. For the copier to function as a Remote/Tandem Copier it has to be  
setup in advance.  
NOTE  
CTo reset the Remote/Tandem mode, press the CANCEL button.  
20  
Basic Menu  
Tandem/Remote Copy Settings (Registering)  
I Register the parameter of the user machine as following procedures.  
It is necessary to input the Key Operator ID code when regitering selected machine.  
(1) Press the FUNCTION Key on the  
Control Panel.  
(2) Select the GENERAL  
1
SETTINGS in the Function  
Setting mode.  
Select 04 Key operator mode  
button.  
2
Input ID Code (4 digits) and Touch  
the OK button.  
3
Scroll to screen 08/09 and select 35  
Tandem user parameter.  
4
5
Then enter the machine name by  
using the QWERTY keyboard then  
touch the OK button.  
(Up to 15 characters)  
Ex: Panasonic  
Then enter the key name (up to 15  
characters).  
6
(By default, the key name will be up  
to 15 characters of the station’s  
name. If you do not want to change  
it, touch the OK button.)  
21  
Basic Menu  
Tandem/Remote Copy Settings (Registration)  
I If you want to print from a Remote printing copier, either DP-3510, DP-4510 or DP-6010 that is  
installed on a network with a different subnet mask, the Station (Machine Name) will not be  
displayed for selection in the Touch Panel. You must first register the DP-3510, DP-4510 or DP-  
6010 before being able to use the Tandem/Remote Copying function explained on Page 20.  
(Please consult with your Network Administrator for details on the network address.)  
The Key Operator ID code will be required when regitering a machine for selection.  
(1) Press the FUNCTION Key on the  
Control Panel.  
(2) Select the COPIER SETTINGS in  
1
the Function Setting mode.  
Scroll to screen 04/04 and select 19  
Key operator mode button.  
2
Input the 4-digit ID Code and Touch the  
OK button.  
3
Scroll to screen 05/05 and select 20  
Add new tandem desti.  
4
5
Enter the IP Address by using the  
Keypad and then touch the OK button.  
Ex: 123.123.012.001  
NOTE: When entering a one or two  
digit address, add 00or 0”  
in front of the numerical  
address.  
Then enter the machine name by using  
the QWERTY keyboard then touch the  
OK button.  
6
(Up to 15 characters)  
Ex: DP-6010 SALES  
Then enter the key name (up to 15 characters).  
(By default, the key name will be up to  
15 characters of the stations name. If  
you do not want to change it, touch the  
OK button.)  
7
22  
Basic Menu  
Tandem/Remote Copy Settings (Editing)  
I To edit the registered machine's settings (IP Address, machine name or  
key name).  
Use the same procedure as the  
Registration of the selected  
machine. (See page 22)  
1~3  
Scroll to screen 05/05 and select  
21 Edit tandem desti.  
4
Select the registered machine  
name and touch the OK button.  
5
Enter the New IP Address by using the  
Keypad and then touch the OK button.  
Ex: 123.123.012.002  
6
NOTE  
:
When entering a one or two  
digit address, add 00or 0in  
front of the numerical address.  
Then enter the new machine name  
by using the QWERTY keyboard  
then touch the OK button.  
(Up to 15 characters)  
7
8
Ex: DP-6010 SALES  
Then enter the new key name  
(up to 15 characters).  
(By default, the key name will be  
up to 15 characters of the stations  
name. If you do not want to change  
it, touch the OK button.)  
23  
Basic Menu  
Tandem/Remote Copy Settings (Deleting)  
I To delete the registered machine.  
Use the same procedure as the  
Registration of the selected machine.  
(See page 22)  
1~3  
4
5
Scroll to screen 05/05 and select 22 Delete  
tandem desti.  
Select the registered machine name  
and touch the OK button.  
Touch the YES button to confirm the  
deletion.  
6
24  
Basic Menu  
Job Queue  
I Can refer to a job list waiting for printing, delete or change of priority  
(only for print job).  
I Procedure  
Ex. Delete print job.  
#Touch JOB QUEUE button.  
$Touch PRINT JOB QUEUE  
button.  
%Input password (4-digit) then  
touch the OK button.  
&Select the job(s)* you wish to  
delete and then touch DELETE  
button.  
(Confirm whether to delete by  
selecting YES or NO.  
)Touch CLOSE 2 times to return  
to the BASIC MENU.  
If you want to delete more jobs  
repeat steps & and (.  
CThe PRINT JOB QUEUE requires the Key Operators Password, however, the  
NOTE  
COPY JOB QUEUE does not require a password.  
CThe Job Queue selection function is only available when the optional HDD is  
installed.  
You can select to delete multiple or all jobs.  
Priority can be selected for print jobs only.  
25  
Basic Menu  
Completion Notice  
I Completion Notice  
You or a selected party can be notified with a Job Completion Notice via a pop up screen on  
your PC when the Copy Job is completed.You must set the Job Completion Notice feature prior  
to starting the job and set up the Status Monitor.  
The PC IP Addresses will be automatically displayed into the Address Book on your network  
(contact your network administrator for detail).  
CBefore using the Completion Notice, install the Panasonic-DMS included with the machine.  
Then, set the Status Monitor as follows;  
#Right click the Status Monitor  
icon.  
$Select the Job Completion Notice  
\Pop up Display.  
B4·FLS  
1
2 3 4  
Place the  
Original(s)  
Set function and  
Completion Notice  
Number  
of Copies Pop up  
Press START  
screen will be  
shown on  
your PC  
Touch the COMPLETION NOTICE  
button.  
#Select the desired PC Address.  
$Touch the OK button.  
CThis Completion Notice is available only when connected to the network.  
CTo reset the Completion Notice, press the CANCEL button.  
NOTE  
26  
2-Sided/Original \Copy  
2-Sided/Orig. \Copy Button  
I Initial Screen  
CTouch the desired button to select a function.  
From 1-Sided originals to 2-Sided  
copies.  
(See page 28)  
(See page 28)  
(See page 28)  
(See page 29)  
(See page 30)  
(See page 31)  
1 \2  
From 2-Sided originals to two 1-Sided  
copies.  
2 \1  
From 2-Sided originals to 2-Sided  
copies.  
2 \2  
From book originals to 2-Sided copies.  
BOOK \2  
Copying two facing pages or a A3 size  
original on two separate A4 size sheets.  
2 PAGE  
From two (four or eight) 1-Sided  
originals, side by side, to 1-Sided copies.  
N in 1  
Formats output in order so document  
can be folded and/or saddle stitched like (See page 33)  
a book.  
BOOKLET  
MULTI-SIZE  
FEED  
Different size originals can be copied full  
(See page 34)  
size (1:1) or same size.  
A special original (like a thin paper etc.,)  
can be fed from the i-ADF original tray.  
This mode adds a delay to allow another  
original to be placed on the i-ADF within  
a specific period of time.  
(See page 35)  
SADF*  
When using the SADF function, consult your key operator.  
C2-Sided originals may be handled either manually or automatically using the  
NOTE  
i-ADF.  
27  
\
2-Sided/Original  
Copy  
1 \ 2, 2 \ 1, 2 \ 2 Copy  
I 1 \2 Copy  
I 2 \1 Copy  
I 2 \2 Copy  
From 1-Sided originals to  
From 2-Sided originals to  
From 2-Sided originals to  
2-Sided copies.  
1-Sided copies.  
2-Sided copies.  
(From Copier Platen or i-ADF)  
(Using i-ADF)  
(Using i-ADF)  
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
( )  
2 3 4 5  
1
COPY SIZE  
(Reduction/  
Enlargement  
Only)  
Number of  
Copies  
Press  
START  
Place the  
Original(s)  
# Select  
2-SIDED/ORIG.  
\COPY  
$ Touch 1 \2,  
2 \1 or 2 \2  
(Example: 2 \2 Copy)  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
28  
\
2-Sided/Original  
Copy  
Book \ 2 Copy  
I Book \2 Copy  
From book originals to 2-Sided copies.  
Except A4, A5 sizes.  
(BOOK FORMAT)  
(FLIPPING)  
B4·FLS  
( )  
(Reduction/  
Enlargement  
Only)  
1 2 3 4 5  
Place the Original  
on the Platen  
COPY SIZE # Select 2-SIDED/  
Number of  
Copies  
Press  
START  
ORIG. \COPY  
$ Select Book \2 Mode  
and Copy Format  
Platen  
A3  
A3  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
29  
\
2-Sided/Original  
2 Page Copy  
I 2 Page Copy  
Copy  
Copying two facing pages or a A3 size original on two separate A4 size sheets.  
I Procedure  
B4·FLS  
( )  
1 2 3 4 5  
COPY SIZE  
Place the  
Original  
Number  
of Copies  
Press  
START  
# Select 2-SIDED/  
ORIG. \COPY  
$Touch 2 Page Mode  
(Reduction/  
Enlargement Only)  
Platen  
Example: A3 size original  
A3  
A3  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
30  
\
2-Sided/Original  
Copy  
N in 1 Copy  
I 2 in 1 Copy  
I 4 in 1 Copy  
I 8 in 1 Copy  
From two 1-Sided originals,  
side by side, to 1-Sided pages.  
From four 1-Sided originals,  
side by side, to 1-Sided  
copies.  
From six 1-Sided originals,  
side by side, to 1-Sided  
copies.  
1
2
1
2
3
4
1
2
3
1
4
2
5
6
3
5
6
7
8
7
4
8
3
4
I 2-Sided Copy  
From 4/8/16 1-Sided originals, side by side, to 2-Sided copies.  
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
( )  
1 2 3 5  
4
Place the  
Originals  
on the i-ADF  
COPY SIZE*  
(Reduction/  
Number of Press  
Copies START  
# Select  
2-SIDED/ORIG. \  
Enlargement Only)  
COPY  
$ Touch N in 1 Mode  
and Make Selection  
% Select N in 1 mode & Select original direction Select the copy layout Touch the  
OK button  
Copy is automatically reduced.  
C2 in 1: 71 %, 4 in 1: 50 %, 8 in 1: 35 %  
(ex. A4 to A4- size)  
Selecting the N in 1 Copy with 2-Sided copy.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
When 2 in 1 copying with different paper size of original, select desired copy  
size with COPY SIZE Key (not PAPER TRAY button of the LCD Touch  
Panel).  
31  
\
2-Sided/Original  
N in 1 Copy  
Copy  
I N in 1 Copy  
Combination for N in 1 copy operation.  
Mode  
Originals  
Layout  
Operation  
1 2 2 1  
1
2
2 in 1  
See page 31  
1
2
2
1
1
2
1 2 2 1  
1 2 1 3 2 1 3 1  
3 4 2 4 4 3 4 2  
1
2
3
4
1 2 1 3 2 1 3 1  
3 4 2 4 4 3 4 2  
4 in 1  
See page 31  
1
2
3
4
1 2 1 3 2 1 3 1  
3 4 2 4 4 3 4 2  
1 2 3 4 1 3 5 7 4 3 2 1 7 5 3 1  
5 6 7 8 2 4 6 8 8 7 6 5 8 6 4 2  
1
2
8
1 2 1 5 2 1 5 1  
3 4 2 6 4 3 6 2  
5 6 3 7 6 5 7 3  
7 8 4 8 8 7 8 4  
8 in 1  
See page 31  
1
2
8
1 2 3 4 1 3 5 7 4 3 2 1 7 5 3 1  
5 6 7 8 2 4 6 8 8 7 6 5 8 6 4 2  
32  
\
2-Sided/Original  
Copy  
Booklet Copy  
I Booklet Copy  
Formats output in order so document can be folded and/or saddle stitched like a book.  
2
3
1
2
3
1
4
4
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
( )  
1 2 3 4 5  
Place the  
Originals  
COPY SIZE  
(Reduction/  
Enlargement  
Only)  
Number of  
Copies  
Press  
START  
# Select 2-SIDED/ORIG.  
\COPY  
$ Touch Booklet Mode  
&
%Select  
*Saddle stitch is  
(Select Cover mode  
)
Binding  
mode.  
automatically  
executed. (saddle  
stitch finisher)  
and Paper Tray.  
Default copy size is Reduce, copy size can be selected with 100 % or Reduce.  
CThe 1/2-Bin Saddle-Stitch Finisher is required for Booklet Copy.  
Maximum originals (images)  
NOTE  
1-Bin Saddle-Stitch Finisher : 40 images  
2-Bin Saddle-Stitch Finisher : 60 images  
CFor Booklet Copy, use A4 or A5 originals only.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
CWhen using the booklet, a maximum of 60 images (40 images/1-Bin Saddle-  
Stitch Finisher) can be stored.  
33  
\
2-Sided/Original  
Copy  
Multi-Size Feeding  
Use this function when copying mixed A3/A4 size originals using the i-ADF. Original size can be  
detected automatically then can be copied full size (1:1) or same size.  
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
( )  
2
1
3 4 5  
Place the  
Originals  
COPY SIZE  
(Reduction/  
Enlargement  
Only)  
Number Press  
of Copies START  
# Select 2-SIDED/ORIG.  
\COPY  
$ Select  
MULTI-SIZE FEED  
Function  
Combination of Multi-Size feeding  
( )  
2
Copies  
Originals  
Full Size  
Reduction  
Enlargement  
A4/A4 R  
A4/A4 R  
A3  
A4  
A3  
A4  
–––  
CMulti-Size Feeding function cannot be combined except SADF in another  
NOTE  
2-sided/original \ copy function.  
34  
\
2-Sided/Original  
Copy  
SADF Mode  
I SADF (Single Sheet Automatic Document Feeder) Function  
This mode adds a 5 second delay to allow another original to be placed on the i-ADF. Special  
originals (like thin paper, etc.) can be fed from the i-ADF Tray and copied continuously using the  
SADF Mode. This is useful, when copying multiple sets of originals that exceed the maximum  
capacity of the i-ADF Tray of 70 sheets (80 g/m2). (See the Example below)  
Before using this feature, the SADF Mode must be enabled in the copier function settings.  
(See page 67)  
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
( )  
A
1 7 2 3 4 5 6  
Place the Original One  
at a Time or up to 70  
COPY SIZE  
(Reduction/  
Enlargement  
Only)  
Number of Press  
Copies START  
Copy  
# Select  
2-SIDED/  
sheets (80 g/m2)  
ORIG. \  
COPY  
$ Select SADF  
Function  
Place the next original within 5  
sec. of last ejected copy.  
(Continued on the next page)  
CSADF function cannot be combined with 2 \1 and 2 \2. (See page 59)  
COptional Image Memory or Hard Disk Drive may be required.  
NOTE  
35  
\
2-Sided/Original  
SADF Mode  
Copy  
Example: To make 5 sets of sorted copies of 100-sheet of originals.  
(a) Place the first 70 sheets of originals on the i-ADF Tray.  
(b) Touch the 2-SIDED/ORIG. \ COPY menu and select SADF.  
(c) Touch the SORT/FINISH menu and select the desired sorting/finishing end result.  
(d) Press the START key.  
(e) After scanning the first 70 sheets, you can place the remaining 30 sheets of originals  
on the i-ADF Tray within 5 second to continue copying without interrupting the cycle.  
Or if you do nothing the machine will display “Another original? /YES or NO”.  
(f) Place the remaining 30 sheets of originals on the tray and select “YES”.  
(g) After scanning the remaining 30 sheets, “Another original? /YES or NO” will display,  
select “NO” to start the printing process.  
Originals: 70 sheets <1st scan>  
1st and 2nd Scanned Data  
are combined into one job.  
5 sets of 100-sheet sorted  
Originals: Remaining 30 sheets <2nd scan>  
copies are printed  
36  
Sort/Finish  
Sort/Finish Button  
I When using Sort Mode without optional Finisher  
1. Features  
Sort  
Rotate-Sort  
Rotate-Group  
1
1
1
1
1
3
1
2. Operation  
i-ADF  
B4·FLS  
Face-Up  
2
1
3 4 5  
Place the  
Originals  
Select SORT/  
FINISH mode  
Select Finishing  
Mode  
Number of Press  
Copies  
START  
Select the type of finishing mode  
#SORT  
Multiple copy sets are sorted automatically.  
$ROTATE-SORT*  
Multiple copy sets are sorted automatically and  
stacked in alternate direction (rotate).  
%ROTATE-GROUP*  
Multiple copies of individual pages are stacked  
in alternate direction (rotate).  
&NON-SORT  
Copy is stored on the tray.  
Rotate-Sort and Rotate-Group functions are available for A4 size only.  
NOTE  
37  
Zoom/Effects  
Zoom/Effects Button  
I Initial Screen  
CTouch the desired button to select a function.  
Copies with variable zoom ratios from  
25 % to 400 % in 1 % increments.  
(See page 39)  
(See page 40)  
(See page 41)  
(See page 41)  
(See page 41)  
(See page 42-44)  
(See page 45)  
(See page 45)  
(See page 45)  
ZOOM  
AUTO ZOOM  
EDGE  
Copy ratios can be selected  
automatically by selecting the paper  
size.  
Creates a blank edge.  
Eliminates dark inner binding shadows.  
Shifts image to right or left.  
BOOK  
MARGIN  
Prints a page number, date or issue  
number on the copies.  
STAMPING  
CENTERING  
IMAGE REPEAT  
INVERSE  
Auto centres the Image on copy when  
using Reduction Mode.  
Creates continuous copy images on  
one sheet.  
Copies an inverse image  
CNegative to Positive  
CPositive to Negative  
CFor combining Zoom/Edit functions and other functions, see page 59.  
NOTE  
CTo reset Zoom/Effects mode, press the RESET key.  
38  
Zoom/Effects  
Zoom Copying  
I Zoom  
Copies with variable zoom ratios from 25 % to 400 % in 1 % increments.  
B4·FLS  
1 2 3 4 5  
Number  
Place the  
Select ZOOM/  
Select ZOOM and ZOOM  
Press  
of Copies  
Original(s)  
EFFECT Mode  
START  
RATIO  
<To set the width and length Zoom to  
same ratio>  
Adjust the Zoom Ratio using the G·Fbuttons  
or the keypad, and then touch the OK button.  
<To set the width and length Zoom Ratio  
Individually>  
Touch the (A) or (B) buttons and adjust the  
Zoom Ratio using the G·Fbuttons or the  
keypad, then touch the OK button.  
(A)  
(B)  
CWhen changing the paper size after setting the zoom ratio, please use the  
PAPERTRAY button.  
ATTENTION  
NOTE  
If you use the COPY SIZE key, the zoom ratio will be changed.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
CIf using the keypad to set the zoom ratio, press the CLEAR key first to reset  
the zoom ratio.  
39  
Zoom/Effects  
Auto Zoom Copying  
I Auto Zoom  
The copy Zoom Ratio adjusts automatically to the selected paper size.  
B4·FLS  
1 2 3 4 5  
Number  
Place the Original  
Select ZOOM/  
Select Auto Zoom and  
Press  
of Copies  
on the Platen*  
EFFECT Mode  
START  
paper size  
#The Zoom Ratio adjusts automatically to  
the selected paper size.  
$Touch the OK button.  
%Select paper size.  
&Touch the OK button.  
For the Auto Zoom function to work properly when using the skyshot mode, open the  
i-ADF.  
NOTE  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
CAn incorrect exposure may occur when there is a black line at the edge of the original  
or an image which the copier interprets as a black pattern in the skyshot mode.  
CAn incorrect position detection of the original may occur when a strong light shines  
onto the glass during skyshot mode.  
40  
Zoom/Effects  
Edge/Book/Margin  
I Procedure  
B4·FLS  
1 2 3 4 5  
Number  
Place the  
Select ZOOM/  
Select Edge, Book or  
Press  
of Copies  
Original(s)  
EFFECT Mode  
START  
Margin  
Edge  
#When the vertical and horizontal void areas are the  
same, adjust the void width by using the F·Gbuttons,  
then touch the OK button.  
#When the vertical and horizontal void areas are  
different, select vertical or horizontal edge.  
$Adjust each void width by using the F·Gbuttons.  
%Touch the OK button.  
Initial setting (Factory setting): 5 mm  
Book  
#Adjust void width by using the F·Gbuttons.  
$Touch the OK button.  
Initial setting (Factory setting): 20 mm  
Margin  
#Select the Margin area.  
$Adjust void width by using the F·Gbuttons.  
The image is moved only by the void width which has  
been set.**  
%Touch the OK button.  
Initial setting (Factory setting): 10 mm  
Initial setting (Factory setting) can be changed by the function mode.  
(See page 62)  
NOTE  
If a part of the copied image is missing when using the Margin mode,  
change the Margin Reduction setting toYes. (See page 62)  
∗∗  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
41  
Zoom/Effects  
Stamping (Page Numbering)  
I Feature  
The page number can be automatically printed on each page.  
1/8  
-1-  
B4·FLS  
1 2 3 4 5  
Number  
of Copies  
Place the Originals  
(i-ADF)  
Select ZOOM/  
EFFECT Mode  
Select Stamping  
(Page Numbering)  
Press  
START  
#Select the Orientation.  
$Select the Layout for Page Numbering.  
%Select the Starting Page to begin page  
numbering. Page 1, 2 or 3 can be selected.  
&Touch the OK button.  
CPage numbering format* is indicated with -n- or  
n/m.  
The page numbering format can be changed in function mode.  
(See page 63)  
NOTE  
CThe i-ADF is required for Page Numbering.  
CTo reset each mode menu, touch the CANCEL button on the touch panel.  
42  
Zoom/Effects  
Stamping (Date Stamp)  
I Feature  
The date can be automatically printed on each page.  
01/01/2001  
B4·FLS  
1 2 3 4 5  
Number  
of Copies  
Place the Originals  
(i-ADF)  
Select ZOOM/  
EFFECT Mode  
Select Stamping  
(Date Stamp)  
Press  
START  
#Select the Orientation.  
$Select the Layout for print date.  
%Select the date for stamp.  
&Touch the OK button.  
CThe i-ADF is required for Data Stamp.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
43  
Zoom/Effects  
Stamping (Issue Number Stamping)  
I Feature  
The issue number can be automatically printed on each page.  
001  
B4·FLS  
1 2 3 4 5  
Place the Originals Select ZOOM/  
Number  
of Copies  
Press  
START  
Select Stamping (Issue  
Number Stamping)  
(001 ~ 999)  
(i-ADF)  
EFFECT Mode  
#Select the Orientation.  
$Select the Layout for print Issue Number.  
%Select the starting Issue Number for stamp.  
&Touch the OK button.  
CThe i-ADF is required for Issue Number Stamping.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
CMultiple copy sets will be sorted automatically.  
NOTE  
44  
Zoom/Effects  
Centering/Image Repeat/Inverse Copy  
I Centering  
I Image Repeat  
Copy image can be centred  
automatically on selected paper.  
Create continuous copy image on  
one sheet.  
I Inverse  
Negative/Positive image can be  
made for interesting effects.  
I Procedure  
B4·FLS  
1 2 3 4 5 6  
Place the Select ZOOM/  
Original(s) EFFECT Mode  
Select PAPER Number  
Press  
START  
Select Centering,  
Image Repeat or  
Inverse  
TRAY and  
of Copies  
touch the OK  
∗∗  
button.  
(On the platen when Centering and Image Repeat )  
3
4
In Centering and Image Repeat mode, make copies with i-ADF open.  
Remove the originals from the i-ADF before selecting the Centering and  
Image Repeat mode.  
NOTE  
When in Inverse mode, this step is not needed.  
∗∗  
CAn incorrect position detection of the original may occur when a strong light  
shines onto the glass during the Centering and Image Repeat mode.  
Also an image which the copier interprets as a black pattern in the  
Centering and Image Repeat modes.  
45  
Insertion/Overlay  
Insertion/Overlay Button  
I Initial Screen  
CTouch the desired button to select a function.  
Adds cover page(s) to the copies.  
(See page 47)  
(See page 48)  
(See page 49)  
(See page 50)  
(See page 51)  
(See page 52)  
(See page 53)  
COVER  
Inserts paper(s) between the copies.  
Inserts paper between OHP film.  
PAGE INSERTION  
OHP INTERLEAVING  
PRESENTATION  
OVERLAY  
Inserts paper between OHP film and  
make copy Sets for hand-outs.  
Overlays a second image onto the first by  
using a second original or a file stored in  
memory.  
Edits file of form overlay including  
registration, erase and title edit.  
FILE EDIT  
Overlays a image onto the file stored in  
memory.  
FORM OVERLAY  
CTo reset INSERTION/OVERLAY, press the RESET key.  
CThe i-ADF is required for PAGE INSERTION/OVERLAY.  
NOTE  
46  
Insertion/Overlay  
Cover  
I Cover  
Adds cover page(s) to the copies.  
Colour  
Colour  
Blank  
Paper  
Original  
Original  
Paper  
Paper  
1
2
1
1
2
3
1
2
3
2
+
+
4
4
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
1 2 3 4 5  
Place the Originals  
(Up to 70; 80 g/m2 paper) OVERLAY mode and and select PAPER  
select Cover mode TRAY  
Select INSERTION/  
Select Blank/Copy  
Number of Press  
Copies START  
#Select COVER mode.  
3
$Select BLANK/COPY with Front or  
Front + Back.  
%Select PAPERTRAY.  
&Touch the OK button.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
47  
Insertion/Overlay  
Page Insertion  
I Page Insertion  
Insert paper between the copies.  
Blank  
Paper  
Copied  
Paper  
Original  
Original  
+
+
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
1 2 3 4 5 6  
Place the  
Originals  
(Up to 70)  
Select INSERTION/ Select Blank/Copy Input insert Number of Press  
OVERLAY mode  
and select Page  
Insertion mode  
and select PAPER position  
TRAY  
Copies  
START  
#Select PAGE INSERTION mode.  
$Select BLANK/COPY.  
%Select PAPERTRAY.  
3
4
&Touch the OK button.  
#Input insert page position with Keypad.  
(Up to 20)  
$Touch the OK button.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
48  
Insertion/Overlay  
OHP Interleaving  
I OHP Interleaving  
Inserts paper between OHP film.  
Blank  
Paper  
Copied  
Paper  
Original  
Original  
1
OHP1  
2  
1
OHP1  
(1)  
P2  
(2)  
(1)  
2
2
(2)  
+
+
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
1 2 3 4 5 6  
Place the OHP  
(Sheet Bypass)  
Place the Select INSERTION/ Select Blank/  
Number of Press  
Copies START  
Originals  
OVERLAY mode  
Copy and  
(Up to 70) and select OHP  
select PAPER  
Interleaving mode TRAY  
#Select OHP INTERLEAVING mode.  
$Select BLANK/COPY.  
%Select PAPERTRAY.  
4
&Touch the OK button.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
CCertain types of transparency film may not be compatible and may damage  
your machine. Consult with an authorised Panasonic dealer for advice  
regarding non-standard paper types. (Panasonic has tested 3M PP2500”  
transparency film and found it to be compatible.)  
NOTE  
49  
Insertion/Overlay  
Presentation  
I Presentation  
Inserts paper between OHP film and make copied sets for hand-outs.  
Blank  
Paper  
Copied  
Paper  
Original  
Original  
1
OHP1  
(1)  
1
OHP1  
(1)  
(1)  
(1)  
P2  
(2)  
2
(2)  
2
(2)  
(2)  
2  
+
+
+
+
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
1 2 3 4 5 6  
Place the OHP  
(Sheet Bypass)  
Place the Select INSERTION/ Select Blank/  
Number of Press  
Copies START  
Originals  
OVERLAY mode  
Copy and  
(Up to 70) and select  
select PAPER  
Presentation mode TRAY  
#Select PRESENTATION mode.  
$Select BLANK/COPY.  
%Select PAPERTRAY.  
4
&Touch the OK button.  
CTo reset each menu mode, touch the CANCEL button on the touch panel.  
NOTE  
50  
Insertion/Overlay  
Overlay  
I Overlay  
Overlays a second image onto the first by using a second original.  
1st-page  
I Procedure  
i-ADF  
B4·FLS  
Face-Up  
1 2 3 4 5 6  
Place the Select INSERTION/ Select Overlay Number of  
Press  
After the overlay  
Originals OVERLAY Mode  
(Up to 70)  
Mode  
Copies  
START  
is copied, confirm  
whether you want  
to store it in the  
machine  
#Adjust the density (transparency) of the  
page being produced using the  
LIGHTER and DARKER buttons.  
$Touch the OK button.  
3
6
#If you DO NOT want to store the overlay  
image into memory for later use, touch  
NO.  
$If you DO want to store the overlay  
image into memory for later use, touch  
YES.  
CDo not turn Off the power switch if the file has been stored, otherwise the file  
ATTENTION  
NOTE  
will be erased.  
COnly A4  
sized originals can be stored as a file.  
CWhen storing the new file, new file will overwrites on the stored file.  
CA registered file can be erased by File Edit mode. (See page 52)  
CWhen selecting Overlay in 2-sided copy mode, the first page of the original  
will be copied to 1-sided.  
51  
Insertion/Overlay  
File Edit  
I File Edit  
There are three File Edit available in the Form Overlay function.  
Register: To Add a new file Erase: To Erase a registered Title Edit: To Change the title  
file  
of a file  
I Procedure  
B4·FLS  
( )  
1 2 3 4  
Place the Select INSERTION/  
Select File Edit  
mode and  
desired function  
Press START  
Register  
Original  
OVERLAY Mode  
(
)
(Register)  
File Key  
REGISTER*  
ERASE  
#Select the File Key to  
erase.  
$Touch the ERASE button.  
%Touch the OK button.  
FILE NAME EDIT  
#
Touch each File Key then,  
#Select the File Key to edit.  
$Touch the FILE NAME EDIT  
button.  
%Change the file name by using  
the QWERTY keyboard then  
touch the OK button.  
touch the REGISTER button.  
$Set the registered density.  
%Press Start.  
&Touch the OK button to  
confirm registration.  
(Input the file name by using  
the QWERTY keyboard then  
touch the OK button.  
Refer to entering the station  
name of the Network Scanner.  
(See page 98)  
Refer to entering the station  
&Touch the OK button.  
name of the Network  
Scanner. (See page 98)  
Up to 5 image files can be registered. If the selected File Key already contains a  
registered file image, the new image will over-write the current image.  
NOTE  
CFunction to select the file is only available when the optional Hard Disk Drive  
(DA-HD60) is installed.  
52  
Insertion/Overlay  
Form Overlay  
I Form Overlay  
Overlay an image stored in memory onto the copier.  
File  
I Procedure  
B4·FLS  
1 2 3 4 5  
Number of  
Copies  
Place the Select INSERTION/  
Original OVERLAY Mode  
Press START  
Select Form Overlay mode  
Select Overlay file  
#Select file in memory.  
$Touch the OK button.  
3
CFunction to select the files is only available when the optional Hard Disk  
Drive (DA-HD60) is installed.  
NOTE  
When the optional Hard Disk Drive is not used, selectable file is only one file.  
CWhen the image is not available in the memory to overlay, Form Overlay  
function will not be selectable.  
53  
Job Memory  
I Five Copy Jobs can be stored in Memory (M1 to M5) for recall at a later  
time.  
B4·FLS  
To store a job in memory  
#Set up the copy job to be stored in memory,  
by first selecting each function you wish the  
copier to perform.  
$Touch the JOB MEMORY button.  
%Touch the Memory in button. (  
)
&Touch the M1, M2, M3, M4 or M5 button.  
To recall a job stored in memory  
(Touch the JOB MEMORY button.  
)Touch the M1, M2, M3, M4 or M5 button.  
*Press START.  
When touching the M1, M2, M3, M4, or M5 button, recalled job stored in memory will be display  
at the job setting area.  
CJOB MEMORY mode will not be deleted even if the power switches are turned Off.  
CWhen storing a new job into a programmed memory location, the previously stored job  
NOTE  
will be overwritten and erased.  
CM1, M2 can use as manual skyshot mode by setting user function mode.  
54  
Other Features  
Concurrent Copying  
I Concurrent Copying (Requires the optional Hard Disk Drive/DA-HD60 to  
be installed)  
Next copy job can be reserved even if the current copy job is not completed, as long as the  
scanning was completed.  
B4·FLS  
2 3 1 4 5  
Place the  
Original  
Select  
Function  
Touch RESERVE A  
JOB button  
Number  
of Copies  
Press  
START  
I Procedure  
#Start Current copy.  
$Complete scanning of current copying.  
%Touch Reserve a Job button.  
&Job set and press START.  
CPrinting Jog Waiting List can be confirmed with Job Queue.  
NOTE  
(See page 25)  
CCompletion notice setting can be made with Completion Notice function.  
(See page 26)  
55  
Other Features  
Energy Saver/Interrupt  
ENERGY SAVER Key INTERRUPT Key  
B4·FLS  
I These modes can save power while the copier is not in use.  
ENERGY SAVER  
Energy Saver Mode  
#To enter this mode.  
Press the ENERGY SAVER key or the copier will automatically  
enter the Energy Saver Mode after 15 minutes from the last copy.  
The indicator will flash.  
$To cancel this mode and make copies.  
Press the ENERGY SAVER key again.  
Sleep/Auto Off Mode*  
#Automatically enters the Sleep/Auto Off Mode after 90 minutes  
from the last copy.The copier power will drop and the indicator  
will light.  
$To make copies, press the ENERGY SAVER key.  
Interrupt Mode  
CThis mode can interrupt other copy jobs while making copies.  
#Touch the INTERRUPT key, the indicator will light.  
$Make another copy job.  
INTERRUPT  
%Touch the INTERRUPT key again to continue the original job.  
CEnergy saver time (15 minutes) and Sleep/Auto Off time (90 minutes) can be changed  
by the key operator. (See page 67)  
NOTE  
CSleep Mode and Auto Off Mode can be selected by the key operator. (See page 70)  
Modes  
Power Consumption  
Warm UpTime  
Approximately 240 Wh (6010)  
Approximately 210 Wh (4510)  
Approximately 160 Wh (3510)  
Approximately 180 Wh (6010)  
Approximately 170 Wh (4510)  
Normal Operation  
N/A  
Energy Saver Mode  
Sleep Mode  
Min. 30 sec. recovery (6010/4510)  
180 sec. recovery (6010/4510)  
30 sec. recovery (3510)  
Approximately 20 Wh  
Approximately 4 Wh  
(Approximately 3 Wh, for DP-3510 and except Europe)  
180 sec. recovery (6010/4510)  
30 sec. recovery (3510)  
Auto Off Mode  
The machine will not go into Sleep Mode when the Weekly Timer is selected.  
56  
Other Features  
Skyshot Mode  
I Skyshot allows copying a manuscript without generating dark borders  
even if the platen cover or ADF is opened.  
Skyshot mode eliminates dark borders around the originals, and is especially convenient for  
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,  
etc.).These documents can be reproduced without generating any unnecessary black areas  
simply by making a copy with the cover open.  
Two types of Skyshot modes can be selected;  
Digital Skyshot Mode :The scanning area (size) is not pre-determined.  
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in  
advance. (See page 72)  
I Digital Skyshot Mode  
B4·FLS  
1
3
Place the Original on the platen  
(Opening the Platen Cover/ADF)  
( )  
2
Press START  
Select the Digital Skyshot Mode  
copy  
The Digital Skyshot has been 2 modes (  
or  
).  
The default setting of Digital Skyshot Mode is None.  
Before using this mode, select each setting by using the Function setting.  
#Press the FUNCTION Key.  
$Touch the COPIER SETTINGS button.  
%Touch the [button to advance to the 02/04 Display  
Screen of Copier Settings menu.  
&Touch the 06 Digital skyshot mode button.  
(Select the desired function and touch the OK button.  
06 Digital skyshot setting  
No  
:None  
Freeshp (Free shape):Copy is made with slant.  
copy  
Parallel  
:Copy is made to parallel.  
(within 5 degrees)  
CAn incorrect exposure may occur when there is a black line at the edge of  
the original or an image which the copier interprets as a black pattern in the  
skyshot mode.  
NOTE  
CAn incorrect position detection of the original may occur when a strong light  
shines onto the glass during skyshot mode.  
57  
Other Features  
Skyshot Mode  
I Manual Skyshot Mode  
When using this function, the custom size should be registered into memory (M1, M2) in advance.  
CSet 07 Manual Skyshot Mode in Copier Settings first. (See page 53)  
Platen  
Upper-  
Left  
B4·FLS  
Corner  
1 2 3 4 5  
Place the  
Touch the JOB  
Select Custom  
Number of Press  
Original*  
MEMORY button  
Size (M1 or M2) Copies  
START  
A
2 3  
Changing the default M1/M2 size  
This setting should be carried out by a Key Operator.  
#Select the COPIER SETTINGS in Function Setting  
mode.  
(See page 68)  
$Touch the FGbuttons to advance to the 04/04  
Display Screen of Copier Settings menu.  
%Touch the 19 Set key operator code button.  
&Enter the Key Operators ID Code and then press  
the OK button.  
(Touch the FGbuttons to advance to the 03/05  
Display Screen.  
)Select 12 M1, size and 13 M2, size and enter the  
originals size.  
*Touch the OK button.  
If using i-ADF, place original on the centre position of ADF Tray. The i-ADF tray can be  
NOTE  
fed only 50 -105 g/m2 plain paper.  
CWhen changing the M1 or M2 Size, consult with the key operator.  
CWhen using the manual skyshot mode, the M1 and M2 are turned On and other job  
memory cannot be used.  
CTo reset the manual skyshot mode, press the RESET key.  
58  
Combined Function Table  
SORT/  
FINISH  
INSERTION/  
OVERLAY  
2-SIDED/ORIG.  
\COPY  
ZOOM/  
EFFECTS  
Others  
Next  
Selections  
First  
Selections  
1 \2  
2 \1  
2 \2  
Book \2  
2 Page  
N in 1  
Booklet  
Multi-Size Feeding  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
b b b b b b b b b b b b b b b b b b b A A b b A b b A b  
b b b b b b b b b b b b b ✕ ✕ b b b b A b b A b b A  
b b b b b b b b b b b b b ✕ ✕ b b b A A b b A b b A  
b b b b b b b b b b b b b ✕  
b A  
b A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A b b A b  
A b b A b  
b b b b b b b b b b b b b ✕  
b b b b b b b b b b b b b ✕ ✕ b A  
b ✕ ✕ b b ✕ ✕ b A  
b b b b b b b b b b b b b ✕ ✕ b A  
A b b A b b A  
A
A
A b b A  
A b b A  
R
SADF  
b A A b b b b R b b b b b b b b b b b b b ✕ ✕ b A  
A b b A b b A  
Sort  
b b b b b b b b b A  
b b b b b b b b b A  
b b b b b b A b b A  
b b b b b b A b b A  
b b b b b b A b b A  
b b b b b b A b b A  
b b b b b b A b b A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A b b b b b b b b b b b b A b b b A b b A b  
Shift-Sort  
Rotate-Sort  
Staple-Sort  
Shift-Group  
Rotate-Group  
Non-Sort  
A b b b b b b b b b b b b A b b b A b b A b  
A
b b b b b b b b b b b A b b b A b b A b  
A b b b b b b b b b b b b A b b b A b b A b  
A b b b b b b b b b b A  
b b b b b ✕ ✕ b A  
A
A
A
A
A b b A b b A b  
A b b A b b A  
A
A b b b b b b b b b b A A b A b b A b b b b  
Punch  
b b b b b b A b b b b b b b R b b b b b b b b b b b A A b b A b b A b  
Zoom  
b b b b b b b b b b b b b b b b b A A b b b b b b b b b b b b b A b b A b  
Auto Zoom  
Edge  
Book  
b A  
A
A
A
A
A
A
A b b b b b b b A  
A
b b b A  
A
A
A
A
A
A b b A b  
b b b b b b b b b b b b b b b b b b A b b b A b b b b b b b A b b A b  
b b b b b ✕ ✕ b b b b b b b b b b b b A b b A b b b b b b b A b b A b  
b b b b b b b b b b b b b b b b b b b b A b A b b b b b b b A b b A b  
Margin  
Stamping  
Image Repeat  
Centering  
Inverse  
b b b ✕ ✕ b b b b b b b b b b b b b b b A  
A
R
A
b b b b b b b A b b A  
A
b A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A b b b b b b b b b ✕  
A b b b b b b b b b ✕  
A b A  
A
A
A
A
A
A
A
A
A
A
A b b A b  
A b b A b  
R b A  
b b b b b b b b b b b b b b b b b b b b b b b b b R b b b b b b A b b A b  
Cover  
Insertion  
b b b ✕  
b b b b ✕  
b b b b b b ✕ ✕ b A b A A b b A b ✕  
A
A
A
A
b b b ✕  
b b b b ✕  
b b b b b b ✕ ✕ b b A  
A
A
A
A b b A b ✕  
A b b A b ✕  
A b b A b ✕  
OHP Interleaving  
Presentation  
Overlay  
Form Overlay  
Interrupt  
b ✕  
b b b b b b ✕ ✕ b A  
✕ ✕ b b b b b b ✕ ✕ b A  
A
A
b b b b ✕  
b b b ✕ ✕ b ✕ ✕ b b b b b b b b b b b b b b ✕ ✕ b b b b b A  
b b b ✕ ✕ b ✕ ✕ b b b b b b b b b b b b b b ✕ ✕ b b b b b A  
b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b ✕  
A
A
b A b  
b A b  
R b b b  
Proof Copy  
Tandem Copy  
Copy Reservation  
Manual Skyshot  
Digital Skyshot  
b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b A  
b b b b b b b b b b b b b b b b b b b b b b b b b b ✕  
R
A b b  
A b b  
A
b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b A b b b  
b b b b b ✕ ✕ b ✕  
A b b A  
b ✕ ✕ b b ✕  
b b b b b b b b b b b b b b b ✕  
b b A b b A  
A
b : Possible Combined Functions.  
: Unavailable Combined Functions.  
A : Next Selection is Carried Out.  
R : When the same function is selected twice, the second selection is ignored.  
59  
Function  
I Using Function Modes to change the Initial Copy Modes  
Options  
GENERAL  
FUNCTIONS  
COPIER  
SETTINGS  
PRINTER  
SETTINGS  
FAX/EMAIL  
SETTING  
SCANNER  
SETTINGS  
Input Identification (Key Operator ID) Code  
General  
Functions for  
Key Operator  
Copier  
Settings for  
Key Operator  
Printer  
Settings for  
Key Operator  
Fax/EMAIL  
Settings for  
Key Operator  
FUNCTION Key  
I Procedure  
RESET Key  
B4·FLS  
#Press the FUNCTION Key.  
$Select the COPIER SETTINGS in Function  
Setting mode. (See page 62)  
%Touch the [button to advance to the 04/04  
Display Screen of Copier Settings menu.  
&Touch the 19 Set key operator code button.  
(Enter the Key Operators ID Code and then  
press the OK button.  
)Follow the on screen instructions.  
*After setting, touch the OK button on the  
Display Panel.  
+Press the RESET key, then exit the Function  
mode.  
CPlease refer to each operating instructions for options function settings.  
NOTE  
60  
Function  
GENERAL FUNCTIONS  
I Using Function Modes to Change the Initial Machine Modes  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
00 Power on default mode  
Selects mode.  
Copy  
CCopy, Printer, Scanner  
01 Manual add toner  
Adds toner manually.  
COff, On  
02 Sort memory status  
03 Department counter  
Indicates the sorting memory status.  
COff, On  
Off  
01/01  
Consult  
with an  
authorised  
service  
Indicates the department counter.  
dealer  
04 Set key operator code  
Input the Key Operator ID code.  
61  
Function  
COPIER SETTINGS  
I Using Function Modes to change the Initial Copy Modes  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
00 Margin value default  
Selects the margin shift value.  
C5 mm, 10 mm, 15 mm, 20 mm  
10 mm  
5 mm  
20 mm  
No  
01 Edge value default  
02 Book value default  
Selects the edge width.  
C5 mm, 10 mm, 15 mm, 20 mm  
Selects the book void width.  
C15 mm, 20 mm, 25 mm, 30 mm  
01/04  
03 Margin reduction default Selects the reduction ratio in margin mode.  
CNo, Yes  
04 2-sided mode default  
Function sets the duplex priority mode.  
No  
CNo, 1 to 2, 2 to 2, Book to 2  
05 Reduce N in 1 for space Selects whether to disable edge deletion.  
No  
CNo, Yes  
06 Digital skyshot mode  
07 Manual skyshot mode  
Enables or disables the use of Skyshot mode. Freeshp  
CNo, Freeshp, Parallel  
Enables or disables the use of Manual  
Skyshot.  
Off  
02/04  
COff, M1 On, M2 On, M1&M2 On  
08 Auto contrast adjustment Automatically adjusts the copy density for text  
Yes  
and photographic originals.  
CNo, Yes  
09 N in 1 default mode  
Selects the N in 1 default mode.  
2 in 1  
C2 in 1, 4 in 1, 8 in 1  
62  
Function  
I Using Function Modes to change the Initial Copy Modes  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
Selects the booklet magnification.  
C100 %, Reduce  
Reduce  
11 Booklet default  
magnification  
Selects the sort mode.  
CNon-sort, Sort, Staple-sort, Shift-Group  
12 Sort mode default  
ADF copy  
Sort  
03/04  
Selects the sort mode.  
CNon-sort, Sort, Staple-sort, Shift-Group  
13 Sort mode default  
FB copy  
Non-sort  
Portrait  
Page  
-n-  
Selects the staple position.  
CLandscape, Portrait  
14 Staple position setting  
15 Stamping default mode  
16 Page numbering style  
17 Hole punch default  
Selects the stamping mode.  
CPage, Date, Issue  
Selects the page numbering style.  
C-n-, n/m  
04/04  
Enables the hole punch mode.  
Off  
COff, On  
18 Img. repeat dotted line  
Selects the dotted line.  
Print  
CNone, Print  
Input Key Operator ID code.  
19 Set key operator code  
*FB: Platen  
63  
Function  
SCANNER SETTINGS  
I Using Function Modes to change the Initial Scanner Modes  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
Sets the original setting.  
00 Original mode default  
T/P  
CText, T/P(Text/Photo), Photo  
01 Compression mode  
default  
Sets the compression mode setting.  
CMH, MR, MMR, JBIG  
JBIG  
600 dpi  
No  
02 Resolution default  
Sets the resolution setting.  
C150 dpi, 300 dpi, 600 dpi  
01/02  
03 SADF mode  
Sets the SADF mode setting.  
CNo, Yes  
04 Bind position, 2-sided  
original  
Sets the bind position, 2-sided original setting. Longedge  
CLongedge, Shortedge  
05 Add new address  
06 Edit address book  
07 Delete address  
To add new address.  
CPC, DD, FTP  
To edit address book. (See page 100)  
02/02  
To delete address.  
08 Scanner settings print  
To print scanner settings print.  
Stop  
CStop, Start  
64  
Function  
PRINTER SETTINGS  
I Using Function Modes to change the Initial Printer Modes  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
Sets the original setting.  
1
00 Number of prints  
C1 ~ 999  
Sets the paper size setting.  
A4  
01 Paper Size  
CA3, B4, A4, B5, A5, LEDGER, LEGAL,  
LETTER, INVOICE, 8 × 13, 8.5 × 13  
Sets the paper tray setting.  
CAuto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4  
02 Paper Tray  
Auto  
01/04  
Sets the print direction setting.  
CPortrait, Landscape  
Portrait  
On  
03 Print direction  
04 Auto tray selection  
Sets the auto tray setting.  
COff, On  
Sets the 2-sided print setting.  
COff, On  
Off  
05 2-sided print  
06 Bind position  
07 Resolution  
Sets the bind position.  
CLongedge, Shortedge  
Longedge  
600 × 600  
0
Sets the resolution setting.  
C1200 × 600, 600 × 600, 300 × 300  
02/04  
Sets the font of PCL.  
C0 ~ 99  
08 Font (PCL)  
Sets symbol table (PCL).  
C0 ~ 35  
11(PC-8)  
09 Symbol table (PCL)  
65  
Function  
PRINTER SETTINGS  
I Using Function Modes to change the Initial Printer Modes  
Screen  
No.  
Initial  
Setting  
10  
Modes  
10 Pitch (PCL)  
Function  
Sets pitch(PCL).  
C0.44 - 99.99  
Sets point size(PCL).  
C4.00 - 999.75  
12  
11 Point size (PCL)  
Sets lines/page(PCL).  
60  
12 Lines/Page (PCL)  
13 Return character (PCL)  
14 Mutual A4/LTR  
03/04  
C5 - 123  
Sets return character(PCL).  
CCR, CR + LF  
CR  
Off  
Converts A4 to Letter automatically.  
COff, On  
Indicates the memory status of mailbox.  
CMemory, Box  
15 Mailbox memory status  
16 Print data  
Sets print data.  
CStop, Start  
04/04  
19 Set key operator code  
Input the Key Operator ID code.  
66  
Function  
GENERAL FUNCTIONS for Key Operator  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Consult  
with an  
authorised  
service  
dealer  
Modes  
00 Paper Size  
Function  
Sets the paper size of each paper drawer.*  
CA3, B4, A4, A4-R, B5, B5-R, A5, 8 × 13, 8.5  
× 13, FLS2, Ledger, Legal, Letter, Letter-R,  
Invoice, AUTO**  
Selects the Control Panel reset time.  
CNone, 30 seconds, 1 min., 2 min., 3 min.,  
4 min.  
1 min.  
01 Auto reset time  
Sets the Energy Saver mode and time.  
C1-240 minutes  
02 Power save mode timer  
03 Sleep/off mode timer  
04 Language default  
05 Special paper tray 1  
15  
01/09  
Sets the Sleep/Auto off timer.  
CNone, 1-240 minutes  
90 (DP-4510/  
6010  
15 (DP-3510)  
English  
)
Selects the message language of the display.  
Sets the paper drawer for special paper  
(ex: coloured).  
CNone, Paper Tray 1, Paper Tray 2, Paper Tray  
3, Paper Tray 4, Sheet Bypass, LCT  
None  
None  
Sets the paper drawer for special paper  
(ex: coloured).  
06 Special paper tray 2  
CNone, Paper Tray 1, Paper Tray 2, Paper Tray  
3, Paper Tray 4, Sheet Bypass, LCT  
02/09  
Sets the output bin.  
CUpper, Bottom  
07 Output Bin Copy  
08 Output Bin Printer  
Upper  
Sets the output bin.  
CUpper, Bottom  
Bottom  
Bottom  
09 Output Bin FAX/E-MAIL Sets the output bin.  
CUpper, Bottom  
CIt is necessary to input the Key Operator ID code before changing items on  
NOTE  
this page.  
Only 3 kind of Paper Size (Letter, A4, B5) will be available when selecting  
Tray 1.  
“AUTO” Paper Size can be selected for Tray 2.  
∗∗  
67  
Function  
GENERAL FUNCTIONS for Key Operator  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
10 Auto paper out rotate  
Copier will automatically rotate image and  
print when selected paper tray is empty.  
COff, On  
Off  
11 Beep sound in Touch  
Panel  
Beep sound when touching the panel.  
COff, Soft, Loud  
Soft  
12 Original set beep sound Beep sound when original is set on the Platen. No  
03/09  
CNo, Yes  
13 Original set beep sound Beep sound when original is set in the ADF.  
Yes  
in ADF  
CNo, Yes  
Monitors copy usage of each department.  
(1) Print usage of each department  
(2) Print limit of each department  
(3) ID code of each department  
Consult  
with an  
authorised  
service  
dealer  
14 Dept. counter mode  
15 Fold position (A3/LDG)  
16 Fold position (B4)  
C-4 - +4 mm  
0 mm  
0 mm  
0 mm  
Off  
C-4 - +4 mm  
04/09  
17 Fold position (A4/LTR-R) C-4 - +4 mm  
COff, On  
19 Language select priority  
CIt is necessary to input the Key Operator ID code before changing items on this page.  
NOTE  
68  
Function  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
Sets date time registered.  
20 Date time setting  
CMonth, Day, Year, Time  
Sets the weekly On/Off timer.  
21 Weekly-timer  
Off  
COff, On  
Sets the DHCP.**  
CNo, Yes  
Yes  
22 DHCP default  
05/09  
23 TCP/IP address  
Sets user IP address.**  
C3 digits × 4  
24 TCP/IP subnet mask  
25 TCP/IP default gateway  
26 DNS server address  
27 Hard disk format  
28 Hard disk error check  
Sets the subnet mask.**  
C3 digits × 4  
Sets the gateway address.**  
C3 digits × 4  
Sets the DNS server.**  
CNo, Yes  
No  
06/09  
Selects the hard disk format.  
CStop, Start  
Selects the hard disk error check.  
CStop, Start  
Not required in copying mode, but needed when installing options for  
advanced functions (see page 126).  
NOTE  
When the No. 22 to 26 function is set, turn OFF and ON the Power Switch.  
CIt is necessary to input the Key Operator ID code before changing items on  
∗∗  
this page.  
69  
Function  
GENERAL FUNCTIONS for Key Operator  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
30 Sleep/Off mode  
selection  
Selects Sleep or Auto Off mode.  
CSleep, Auto Off  
Sleep  
Sets print of general function.  
31 General settings print  
CStop, Start  
Sets clean the corona wire.  
COff, On  
Indicates the MAC address.  
32 Corona wire cleaning  
33 MAC address  
07/09  
Input group ID for address book.  
C0 ~ 99  
34 Address book group ID  
0
35 Tandem user parameter Input parameter of user machine.  
36 Community Name(1)  
Selects to change the SNMP of Community  
Name (1).*  
CEnables read only.  
37 Community Name(2)  
Selects to change the SNMP of Community  
Name (2).*  
08/09  
09/09  
CEnables read/write.  
Input the device name when necessary.*  
(For Status Monitor/EtherTalk Machine Name)  
38 Device Name  
39 Device location  
40 Daylight time  
Input the device location when necessary.*  
(For Status Monitor)  
Sets the daylight time.  
C No, Yes  
Yes  
CIt is necessary to input the Key Operator ID code before changing items on  
NOTE  
this page.  
When the No. 36 to 39 function is set, turn OFF and ON the Power Switch.  
70  
Function  
Copier Settings for Key Operator  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
Selects paper size priority  
00 Paper size priority  
A4  
CA3, B4, A4, B5, A5, LEDGER, LEGAL,  
LETTER, INVOICE, 8 × 13, 8.5 × 13  
01 Original mode default  
02 Text contrast  
Selects original setting  
CText, T/P (Text/Photo), Photo  
T/P  
01/05  
Selects contrast for Text mode  
4
C1 ~ 7  
03 T/P contrast  
Selects contrast for Text/Photo mode  
4
C1 ~ 7  
04 Photo contrast  
Selects contrast for Photo mode  
4
C1 ~ 7  
06 Interleaving default  
07 Page insertion default  
08 Cover mode default  
Selects OHP interleaving paper  
CBlank, Copy  
Blank  
Blank  
F, Blank  
Selects page insertion  
CBlank, Copy  
Selects cover paper  
CF, Blank, F, Copy  
02/05  
FB, Blank, FB, Copy  
(F: Front, FB: Front + Back)  
09 SADF mode  
Enables or disables the use of SADF function. Yes  
CNo, Yes  
CIt is necessary to input the Key Operator ID code before changing items on  
NOTE  
this page.  
71  
Function  
Copier Settings for Key Operator  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
10 Maximum copy setting  
Determines whether to limit number of copies  
(0-99).  
0
(No limit)  
70 × 160 mm  
Input a size in job memory 1 for frequently  
used size.  
CX: 5~432/Y: 5~297 mm  
(See page 54)  
12 M1, Size  
13 M2, Size  
(X) (Y)  
03/05  
95 × 220 mm  
Input a size in job memory 2 for frequently  
used size.  
(X) (Y)  
CX: 5~432/Y: 5~297 mm  
(See page 54)  
16 Memory overflow  
warning  
Selects the task to perform when memory  
overflow occurs  
Print  
CPrint, Cancel  
17 Toner save mode (T)  
18 Toner save mode (T/P)  
19 Toner save mode (P)  
Selects the toner save in Text mode.  
CNone, Level 1, Level 2*  
None  
None  
None  
04/05  
Selects the toner save in Photo/Text mode.  
CNone, Level 1, Level 2*  
Selects the toner save in Photo mode.  
CNone, Level 1, Level 2*  
CIt is necessary to input the Key Operator ID code before changing items on this page.  
NOTE  
Toner will be saved when selecting the Level 1 or 2 but copy quality will be dropped  
less than None mode when selecting the Level 1 or 2.  
Save value (Panasonic authorised 6 % density original):  
Level 1: maximum approximately 10 % less than None mode.  
Level 2: maximum approximately 20 % less than None mode.  
72  
Function  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
20 Add new tandem  
destination  
Inputs a new destination to split the copy job  
21 Edit tandem  
destination  
22 Delete tandem  
destination  
Edits a copy destination  
05/05  
Deletes a copy destination  
23 Copier settings print  
Print the copier settings  
CStart, Stop  
CIt is necessary to input the Key Operator ID code before changing items on  
NOTE  
this page.  
73  
Function  
Printer Setting for Key Operator  
I Input the Key Operator ID Code to change Settings  
Screen  
No.  
Initial  
Setting  
Modes  
Function  
00 Job completion time  
Sets the job completion time setting.  
180 sec.  
C1~ 999 sec.  
Off  
Compress automatically then print out.  
COff, On  
Sets print the error page.  
COff, On  
01 Page protection  
02 Error page print  
03 Spool function  
On  
01/03  
On  
Sets the spool function.  
COff, On  
On  
Prints text page only.  
04 Text print  
COff, On  
05 PS Configuration print  
06 Printer settings print  
Sets the status page print of PS.  
CStop, Start  
Sets the printer status print.  
CStop, Start  
07 Font list print (PCL)  
08 Font list print(PS)  
09 Mailbox data holding  
Sets the font list print of PCL.  
CStop, Start  
02/03  
03/03  
Sets the font list of PS.  
CStop, Start  
Sets the automatic holding function of mailbox data. 7 days  
Infinity, 1 day, 2 days, 3 days, 4 days, 6 days, 7 days  
C
Sets delete the mailbox data.*  
CAll, Before  
Before  
10 Delete mailbox data  
11 Print queue delete  
Sets authorisation to delete the print queue.  
CFree, Key op. (operator)  
Key op.  
12 EtherTalk Zone name  
Input a EtherTalk Zone name.**  
CMaximum 32 charcters  
Functions except 0 and 11 are available when optional accessories are installed.  
It is necessary to input the Key Operator ID code before changing items on this page.  
When the No. 12 function is set, turn OFF and ON the Power Switch.  
NOTE  
C
∗∗  
74  
Function  
Function Setting for Key Operator  
I Changing the Auto Contrast Setting  
You can select whether the copying density is adjusted automatically for text and photographic  
originals.  
Press the FUNCTION Key.  
FUNCTION Key  
1
B4·FLS  
Proceed as Follows:  
2
#Touch COPIER SETTINGS.  
$Proceed to next page.  
%Select 08 Auto contrast adjust.  
&Select whether Auto Exposure is to be  
performed, and then touch the OK button.  
(Press the RESET key, then exit the Function  
mode.  
75  
Function  
Function Setting for Key Operator  
I Changing the Paper Size  
The paper trays are designed to accommodate A5, A4, A4 R, B4/FLS and A3 Size paper. To  
change the paper size, perform the steps shown below. It is not required to take step 1 and 2  
when selecting Tray 2.  
Press the FUNCTION Key.  
FUNCTION Key  
1
B4·FLS  
Proceed as Follows:  
2
#Touch GENERAL FUNCTIONS.  
(Touch the Paper Tray you wish to  
change and touch the SIZE CHANGE  
button.  
$Select 04 Set key operator code  
button.  
)Touch the Paper Size you wish to  
change and touch OK button.  
%Input ID Code (4 digits) and touch the  
OK button.  
Tray 2 only  
Only 3 kind of Paper Size (A4, B5 and  
Letter) will be available when selecting  
Tray 1.  
&Select 00 Paper size.  
*Touch the OK button.  
+Press the RESET key, then exit the  
Function mode.  
76  
Function  
Changing the Paper Guide and Paper Size Indicator in the Paper Tray  
3
#Pull out paper tray and remove the  
paper.  
$Move the paper guide a to the  
a
required paper length.  
b
%Move the paper guide b to the  
required paper width.  
Pinch the stopper to move the paper  
guide b.  
&Change the paper size indicator.  
F L S B 4  
.
A4  
A5  
ForTray 2:Insert the paper size indicator  
which showing the same  
paper size selected at $ &  
%, then the paper size will be  
automatically selected.  
(Close the paper tray.  
CIt is recommended that the paper guide b be fixed in place with screws.  
Consult an authorised servicing dealer for details on how to fasten using  
screws.  
NOTE  
77  
Function  
Function Setting for Key Operator  
I Department Counter  
Key Operator can manage, limit copies, counters and code numbers for each department.  
(Maximum department number: 300)  
Press the FUNCTION Key.  
FUNCTION Key  
1
B4·FLS  
Proceed as Follows:  
2
#Touch GENERAL FUNCTIONS.  
&Scroll to screen 03/09 and select 14  
Dept. Counter mode.  
$Touch 04 Set key operator code  
(Touch the TOTAL COUNTER button to  
display the sum of all the active  
department counters.  
button.  
CTo clear the total counter, touch the  
INPUT button, enter 0 and touch the  
OK button.  
%Input ID Code (4 digits) and touch  
the OK button.  
CTo print the counter lists for each  
department, touch the LIST PRINT  
button.  
CTo reset the function mode, press the RESET button.  
NOTE  
CContact your authorised servicing dealer to enable the Department Counter feature.  
78  
Function  
Change the Department Counter Number, ID Code and limit the  
Maximum Number of Copies  
3
4
Number of Department Counter  
#Touch the DEPT. COUNTER button.  
$Select the desired department using the scroll button.  
%Input 0to clear the counter.  
&Touch the OK button.  
00112345678  
Department No. Counter (8 digits)  
(3 digits)  
Limit Number of Copies for Each Department  
#Touch the MAX. COPIES button.  
$Select the desired department using the scroll button.  
%Input the maximum number of copies. (Max. 8 digits)  
&Touch the OK button.  
00112345678  
Department No. Maximum number of Copies (8 digits)  
(3 digits)  
I.D Code Number for Each Department  
#Touch the ID CODE button.  
$Select the desired department using the scroll button.  
%Input the ID Code number. (8 digits)  
&Touch the OK button.  
00112345678  
Department No. ID Code number (8 digits)  
(3 digits)  
Exit function mode  
#Touch the OK button.  
$Press the RESET button on control panel.  
79  
Function  
Function Setting for Key Operator  
I Weekly Timer  
Key Operator can manage each on/off time in a week.  
Press the FUNCTION Key.  
FUNCTION Key  
1
2
B4·FLS  
Proceed as Follows:  
#Touch GENERAL FUNCTIONS.  
$Select 04 Set key operator code button.  
%Input ID Code (4 digits) and touch the OK button.  
&Scroll to screen 05/09 and select 21 Weekly timer.  
(Set the End and Start time using the keypad, then touch the OK button.  
CTo reset the function mode, press the RESET or FUNCTION key.  
NOTE  
80  
Function  
I Network Settings  
Key Operator can manage Network settings for Network functions.  
Press the FUNCTION Key.  
FUNCTION Key  
1
B4·FLS  
Proceed as Follows:  
2
#Touch GENERAL FUNCTIONS.  
$Select 04 Set key operator code button.  
%Input ID Code (4 digits) and touch the OK button.  
&Scroll to screen 05/09 and select 23 TCP/IP address.  
(Input TCP/IP address using the keypad, then touch the OK button.  
CFollowings should be set in accordance with Network condition.  
NOTE  
22. DHCP default  
24.TCP/IP subnet mask  
26. DNS server address  
25.TCP/IP default gateway  
81  
Accessories  
Components  
Image Memory  
(DA-SM16B/64B/28B)  
2-Bin Finisher*  
(DA-FS330 for DP-3510)  
(DA-FS600 for DP-4510/6010)  
(See page 83-85, 88)  
C16/64/128 MB  
CTo increase the memory capacity  
for electronic sorting.  
1-Bin Saddle-Stitch Finisher*  
HDD Unit  
(DA-HD60)  
(DA-FS355 for DP-3510)  
(See page 92)  
CFor PS Printing (for Fonts)  
Security Print/Mailbox  
Tandem copy/Concurrent copy  
I-FAX without mail server  
1,000 Station registration  
Print Job Spooling  
OneRIP  
2-Bin Saddle-Stitch Finisher*  
(DA-FS605 for DP-4510/6010)  
(See page 83-87)  
Punch Unit for DA-FS600/605  
(DA-SP31)  
(See page 83, 87)  
Account Management  
Expansion Board  
(DA-EM600)  
Punch Unit for DA-FS355  
(DA-SP41)  
CExpansion F-ROM(8 MB)  
(See page 95)  
Network Scanner Kit  
(DA-NS600)  
ExitTray  
(DA-XT600)  
System Console  
(DA-DS601/602)  
3000-SheetTray(LCT)  
(DA-MA301)  
CTo increase the paper feed  
sources and capacity.  
DA-DS601: Paper Tray × 1  
DA-DS602: Paper Tray × 2  
(550 sheets)  
CTo increase the paper feed capacity.  
(3000 sheets)  
CContact your authorised servicing dealer for details on combinations of options.  
NOTE  
Optional Power Supply for Finisher (DA-PW600) is needed. (Except Europe)  
82  
Accessories  
2 Bin Finisher (DA-FS600)/2 Bin Saddle-Stitch Finisher (DA-FS605)  
1. Operation  
Punch Unit (DA-SP-31)  
When punching the copies (4 holes).  
1 Bin  
2 Bin  
Saddle StitcherTray (DA-FS605)  
When using the Booklet copy mode (See page 33).  
(1) Bin Capacity (sheets)  
Modes  
Paper Size  
1 Bin  
2 Bin  
Staple-sort  
A4  
750  
750  
or (30 sets)  
A4 R, B4, A3  
500  
500  
or (30 sets)  
Non-sort  
Shift-sort  
Shift-group  
A4, A5*  
A4 R, B4, FLS*, A3  
1000  
500  
1000  
500  
A5, FLS size is not applicable for Shift-sort and Shift-group.  
(2) Saddle Stitcher Tray Capacity  
Item  
Paper Size  
Capacity  
Description  
A3, B4, A4 R  
W/out binding: 1 sheet  
W/binding:  
(including single cover page)  
2 to 15 sheets  
Paper Capacity 10 sets (stack of 11 to 15 sheets), 15 sets (stack of 6 to 10 sheets)  
25 sets (stack of 5 sheets or less)  
(3) Punch Unit  
Hole Punch  
Paper Size  
4
A3, A4  
CIf output sheets are curled, or not properly aligned, remove the paper from  
NOTE  
the paper tray, turn it over, and replace it in the paper tray.  
83  
Accessories  
2 Bin Finisher (DA-FS600) / 2 Bin Saddle-Stitch Finisher (DA-FS605)  
2. Features  
Shift-group  
Shift-sort  
Staple-sort  
Punch  
Saddle-Stitch  
(DA-SP31)  
2
4
6
1
1
1
1
3
5
CShift electronic sort copy  
CStaple electronic  
sort copy  
CStaple electronic  
sort copy  
CStack by punch  
(A3, B4, A4, A4 R)  
4 hole: A4/A3  
CUp to 50 sheets  
(A4)/30 sheets  
(A3, B4, A4 R)  
CPaper weight:  
64 - 80 g/m2  
CUp to 60 originals  
(A3, B4, A4 R)  
CPaper weight:  
64 - 80 g/m2  
(DA-FS605 only)  
3. How to use  
i-ADF  
B4·FLS  
Face-Up  
Platen  
Staple Position  
(ex. $-1)  
1 2 3 4 5  
Place the Select  
Original(s) SORT/  
FINISH  
Select  
Finisher  
Mode  
Number  
of copies  
Face-Down  
mode  
Select the type of copy group mode into inverting unit.  
#SHIFT-SORT*  
Multiple copies are sorted automatically and  
stacked with shift.  
$STAPLE-SORT  
Following functions can be selected by pressing  
Staple-Sort button.  
$-1:Top left corner (1 position) (except A5 C, FLS C)  
$-2:Left (2 positions) (except A5 C, A4 C, FLS C)  
$-3:Bottom left corner (1 position) (except A5  
C, FLS C)  
* The Shift-Sort is not available in the  
%SHIFT-GROUP*  
Multiple copies are stored by shifting.  
&NON-SORT  
first set when the memory is full.  
A5 size is not applicable for Shift-sort  
and Shift-group.  
Copy is stored on the tray.  
(PUNCH  
Copies are punched and exited onto bin/tray.  
84  
Accessories  
4. Replacing the Staple Cartridge  
The message shown on the left  
appears when the staples run out.  
Reinstall the Staple Cartridge.  
Insert the staple cartridge until the  
lever locks.  
1 5  
Staple Cover  
2
Close the Stapler Cover.  
6
Staple Cartridge  
Replace the Staple Case.  
New  
3
4
Empty  
Tape  
85  
Accessories  
2 Bin Saddle-Stitch Finisher (DA-FS605)  
When supplying the saddle stitcher unit with staples  
Supplying the Saddle Stitcher Unit with Staples  
1 6  
Stitcher Unit  
Lower Front  
Cover  
Until it  
stops  
7
8
2
3
4
5
Green Handle  
Close the Lower Front Cover.  
Stitcher Unit  
Empty Cartridge  
New Cartridge  
86  
Accessories  
If the unit fails to staple after replacing the  
Staple Cartridge, follow the instructions below.  
I
When the punch hole residue container  
is full (For Punch Unit/DA-SP31)  
When the punch hole residue indicator  
lights up, this indicates that the container  
is full.  
Remove the Staple Cartridge.  
1
Staple  
Cartridge  
1
Punch Unit  
Front Cover  
Residual  
Staple  
2
3
2
Punch Hole  
Residue Container  
3
4
Close the Punch Unit Front  
Cover.  
5
87  
Accessories  
2-Bin Finisher (DA-FS330)  
1. Components  
Upper Bin  
CHole punch  
CA5R/A4/A4R/B4/FLS/A3  
Lower Bin  
CA4 size only (Except A4 C)  
CStapling (Up to 30 sheets)  
CShift electronic sort  
CHole Punch  
2. Features  
IUpper Bin  
Rotate  
Punch  
3
2
1
CSort by rotating sets  
C4-Hole punch  
(A3, A4)  
ILower Bin  
Shift  
Punch  
Staple Sort  
Punch and Shift Punch and Staple  
COffset using  
electronic sorting  
(A4)  
COffset using  
CSort by punching CSort by stapling sets  
punching and  
electronic sorting (A4)  
(A4)  
and stapling sets CUp to 30  
sheets (A4)  
CPaper weight:  
64 - 80 g/m2  
88  
Accessories  
3. How to use  
i-ADF  
B4·FLS  
Face-Up  
Platen  
Staple Position  
(ex. $-1)  
1 2 3 4 5  
Place the Select  
Select  
Finisher  
Mode  
Number  
of Copies START  
Press  
Original  
SORT/  
FINISH  
mode  
Face-Down  
Select the type of copy group mode into 2-bin finisher  
and press OK.  
#SORT  
Multiple copies are sorted automatically and  
stacked with shift.  
$ROTATE-SORT (Upper bin only)  
Copied sets are separated by rotation and exited  
onto tray.  
%ROTATE-GROUP (Upper bin only)  
Grouped copies are rotated and exited onto tray.  
&NON-SORT  
In the 4 hole punch mode, A3 size  
and A4 B size are available.  
Copy is stored on the tray.  
(PUNCH*  
Sorted copies are punched and exited onto tray.  
(Except Rotate-Sort and Rotate-Group modes)  
)SHIFT-SORT (Lower bin only)  
Copied sets are offset and exited onto tray.  
*STAPLE-SORT (Lower bin only)  
Sorted copies are stapled and exited onto tray.  
+SHIFT-GROUP (Lower bin only)  
Grouped copies are offset and exited onto tray.  
CThe above sort modes may not work if you are using gray originals, as this  
may cause a memory overflow.  
NOTE  
CIn such a case, it is recommended either make copies by separate lots  
(except staple-sort) or install optional Hard Disk Drive (DA-HD60).  
CIf output sheets are curled, or not properly aligned, remove the paper from  
the paper tray, turn it over, and replace it in the paper tray.  
89  
Accessories  
2-Bin Finisher (DA-FS330)  
4. Replacing the staple cartridge  
The message shown on the left appears  
when the staples run out.  
Tape  
1 6  
2
3
4
5
7
8
Stapler Cover  
Stapler Unit  
Lock Lever  
#Close the stapler cover.  
$Return the finisher to  
the original position.  
9
Check the operation.  
Staple Cartridge  
Select the staple-sort mode with  
control panel and print the desired  
data.  
Replace the Staple Case.  
10  
New  
Empty  
90  
Accessories  
5. If the unit fails to staple after replacing the staple follow the instruction below.  
Remove the staple cartridge  
according to staple replacing  
procedures steps 1 to 4.  
(See page 90)  
1
Jammed  
Staple  
2
Reinstall the staple cartridge  
according to staple replacing  
procedures steps 7 to 10 and  
check operation. (See page 90)  
3
6. Punch disposal  
Pull out the finisher.  
1
#Pull out the trash box.  
$Dispose the punch hole residue.  
2
Finisher Entry Guide  
3
Trash Box  
Return the finisher to original  
position.  
4
91  
Accessories  
1-Bin Saddle-Stitch Finisher (DA-FS355)  
1. Components  
Bin  
CHole Punch  
CStaples  
Stitch Tray  
CSaddle Stitcher Tray  
Punch Hole Residue  
Indicator Light  
2. Features  
(1-Bin Finisher)  
Shift-group  
Shift-sort  
Staple-sort  
Punch  
Saddle-Stitch  
(DA-SP41)  
2
4
6
1
1
1
1
3
5
CShift electronic sort copy  
CA5, FLS size is not applicable  
CStaple electronic  
CStaple electronic  
sort copy  
CUp to 40 originals  
(A3, B4, A4 R)  
CPaper weight:  
64 - 80 g/m2  
CStack by punch  
sort copy  
4 hole: A4/A3  
for Shift-sort and Shift-group. CUp to 50 sheets  
(A4, A4 R)/  
25 sheets  
(A3, B4)  
CPaper weight:  
64 - 80 g/m2  
92  
Accessories  
2. How to use  
i-ADF  
B4·FLS  
Face-Up  
Platen  
Staple Position  
(ex. $-1)  
1 2 3 4 5  
Place the Select  
Select  
Finisher  
Mode  
Number  
of Copies START  
Press  
Original  
SORT/  
FINISH  
mode  
Face-Down  
Select the type of copy group mode into inverting  
unit.  
#SHIFT-SORT*  
Multiple copies are sorted automatically and  
stacked with shift.  
$STAPLE-SORT  
Following functions can be selected by pressing.  
Staple-Sort button.  
$-1:Top left corner (1 position) (except A5 C )  
$-2:Left (2 positions) (except A5 C )  
$-3:Bottom left corner (1 position) (except A5 C )  
%SHIFT-GROUP*  
The Shift-Sort is not available in the  
first set when the memory is full.  
A5 size is not applicable for Shift-  
sort and Shift-group.  
Multiple copies are stored by shifting.  
&NON-SORT  
Copy is stored on the tray.  
(PUNCH  
Copies are punched and exited onto bin/tray.  
CIf output sheets are curled, or not properly aligned, remove the paper from  
NOTE  
the paper tray, turn it over, and replace it in the paper tray.  
93  
Accessories  
1-Bin Saddle-Stitch Finisher (DA-FS355)  
4. Replacing the staple cartridge  
The message shown on the left appears  
when the staples run out.  
1 6  
New Staple Case  
Tape  
Finisher Front Cover  
7
2
Blue Mark  
Staple Cartridge  
Stapler Unit  
8
3
Stapler Unit  
Staple Cartridge  
9
4
Close the Finisher Front Cover.  
10  
Check the operation  
Select the staple-sort mode with control  
panel and print the desired data.  
5
Empty Staple Case  
11  
94  
Accessories  
5. If the unit fails to staple after replacing the staple follow the instruction below.  
Remove the staple cartridge  
according to staple replacing  
procedures steps 1 to 4.  
1
(See Page 94)  
#Lift up the Cartridge Knob.  
$Remove the jammed staple.  
2
%Return the Cartridge Knob.  
Reinstall the staple cartridge  
according to staple replacing  
procedures steps 7 to 9 and check  
operation. (See Page 94)  
3
6. Punch disposal  
Pull out the finisher.  
1
Pull out the trash box.  
2
#Dispose the punch hole residue.  
$Return the trash box.  
3
Return the finisher to original  
position.  
4
95  
memo  
96  
Network Scanner (Option)  
Document Scanning  
I Document Scanning  
To use the Network Scanner feature, you must first install and configure the included Panasonic  
Document Management System (PDMS) onto you PC.  
B4·FLS  
3
1 2 4 5  
Place the Press the SCAN/ Select  
Select desired  
Press  
START  
Original  
FILE key  
destination from MODE SETTINGS  
the ADDRESS  
BOOK  
The document is scanned and the image is conveyed to the selected destination.  
#Select a destination from the  
ADDRESS BOOK.  
3
4
$Select the Resolution.  
%Select the Original mode.  
&Select the Exposure.  
(Press the START key.  
The Scanner Reception Notice appears on the destination PC.  
#This notice is displayed on the  
destination PC.  
$To view the scanned image, click the  
Display button.  
6
7
#The Document Manager Software (or  
your designated viewer) will start on your  
PC.  
$Double click the Document Desktop.  
%Click the Network Scanner Image folder.  
&The scanned Image(s) will be displayed.  
97  
Network Scanner (Option)  
Address Book  
I Adding a New PC’s IP Address  
Inputting PC IP Addresses for PC Scanning into the Address Book.  
To add a new IP Address for a PC, follow the steps below  
Press Function Key.  
1
2
3
Touch Scanner Settings button  
and touch 05 Add new  
address.  
Enter the IP Address by using  
the Keypad and then touch the  
OK button.  
Ex: 123.001.056.215  
NOTE:When entering one  
or two digit address,  
add 00or 0”  
before that address.  
Then enter the station name by  
using the QWERTY keyboard  
then touch the OK button.  
(Up to 15 characters)  
4
Ex: SALES DEPT  
Button Name  
CAPS  
NUMERIC/  
SYMBOLS  
Function  
Used to input upper case letter(s).  
Used to input numbers and symbols.  
#
When touching the NUMERIC/SYMBOLS button,  
a list with numbers and symbols is displayed.  
$ Select the required number(s) or  
symbol(s) then, touch the CLOSE button.  
Used to move the cursor to the left or to the right side.  
Used to erase the character before the cursor.  
Used to enter a space.  
BACK SPACE  
SPACE  
OK  
Used to complete your entry.  
CANCEL  
Used to cancel your entry.  
98  
Network Scanner (Option)  
Then enter the key name (up to 15  
characters).  
(By default, the key name will be up to  
15 characters of the stations name. If  
you do not want to change it, touch the  
OK button.)  
5
6
7
If you want to assign this address into  
the Favourite section, press YES,  
otherwise press NO.  
Note:The Address Book area is  
reduced by the number of  
assigned Favourite stations.  
*
Select PC then touch the OK button.  
Touch the OK button.  
Do not change the default Port Number  
without your Network Administrators  
approval.  
(Up to 65535, default is 06509)  
To record another PCs IP Address,  
repeat steps 3 to 8.  
8
If you select DD, input will be noticed as DD server. (See page 103 )  
NOTE  
CIf you make a mistake, use I or H to move the cursor beyond the incorrect  
character, press CLEAR then re-enter the new character.  
CThe Address Book cannot be changed or erased until the communication  
has finished.  
To change or erase the settings, wait until finish communication.  
99  
Network Scanner (Option)  
Address Book  
I Editing the Address Book  
If you have to change or erase any of the Address Book stations, follow the steps below.  
To change the settings of an Address Book station  
Press Function Key.  
1
Touch the Scanner Settings button  
and touch 06 Edit address book.  
2
Select the station you wish to change.  
Ex: SALES DEPT  
3
Then enter a new IP Address and  
touch the OK button.  
Ex: 123.001.056.220  
NOTE:When entering one or two digit  
4
address, add 00or 0before  
that address.  
100  
Network Scanner (Option)  
Delete the current station name  
using the Back Space button.  
Then enter a new stations name.  
Ex: PANASONIC  
5
6
7
Delete the current button name  
using the Back Space button.  
Then enter a new button name.  
Ex: PANASONIC  
If you want to assign this address  
into the Favourite section, press  
YES, otherwise press NO.  
Then select a new selection, PC or  
*
DD.  
8
9
*
Do not change the default Port  
Number without your Network  
Administrators approval.  
Default: 0650  
CIf you select DD, the input will be assigned as DD Server. (See page 103)  
NOTE  
CIf you make a mistake, use I or H to move the cursor beyond the  
incorrect character, press C(CLEAR) key, then re-enter a new character.  
101  
Network Scanner (Option)  
Address Book  
To delete an entry from the Address Book  
Touch the Function Key.  
1
2
3
4
Touch the Scanner Settings button and  
touch 07 Delete address.  
Enter the station you wish to delete  
and touch the OK button.  
Ex: SALES DEPT  
Touch YES.  
102  
Network Scanner (Option)  
I Adding the DD Server IP Address  
Input the DD Servers IP Address into the Address Book.  
To add the DD Server IP Address, follow the steps below  
Use the same procedure as  
Adding a New PCs IP Address.  
(See page 98)  
Select DD and then touch the OK  
button.  
1~6  
Enter the account name by using  
the QWERTY keyboard.  
(Up to 60 characters)  
Ex: Jack  
7
8
Enter the password by using the  
QWERTY keyboard and then  
touch the OK button.  
(Up to 60 characters)  
Ex: Jack  
103  
Network Scanner (Option)  
Address Book  
Then enter the directory name,  
using the QWERTY keyboard.  
(Up to 60 characters)  
9
10  
11  
Ex: SALESDEPT  
*
Do not change the default Port  
Number without your Network  
Administrators approval.  
(Up to 65535, default is 21)  
Select SAVE or RETRIEVE, then  
touch the OK button.  
Select whether to display the  
shortcut (OK or CANCEL).  
12  
CThe same procedure as Adding DD Server IP Addressmentioned above will be  
NOTE  
applied for Editing and Erase.  
104  
Problem Solving  
Adding Paper (k)  
I 550-Sheet Paper Tray  
I 1550-Sheet Paper Tray  
1
Place the paper with the copying surface facing down.  
CSpecial papers, like glossy paper, mailing labels and transparencies cannot be used  
in the Paper Tray. Use the sheet bypass for special paper.  
2
3
4
Max Level Indicator  
k
CDo not use paper with folds or wrinkles.  
ATTENTION  
Refer to page 67 for details on changing the paper size for the Paper Tray.  
CUnused paper should always be placed into a bag and the opening should  
be sealed for storage.  
If the paper is left exposed, problems such as paper curl, paper jams,  
wrinkles or loss of copied image quality may occur.  
105  
Problem Solving  
Adding Paper  
I 3000 Sheet Large Capacity Paper Tray (LCT) (DA-MA301)  
1
Paper FeedTray  
Do not touch the tray while it is moving.  
Face-Up  
2
After tray stops, place paper neatly on the tray.  
A4 size only (portrait).  
Overfill Indicator  
3
Up to 3000 sheets, 75 g/m2 paper.  
Close the door.  
4
When using papers with one side printed, place papers with black face  
NOTE  
upward.  
106  
Problem Solving  
Replacing the Toner Bottle (?)  
1 5  
Cap  
Toner Hopper  
2 6  
Toner Bottle  
Hopper  
Close the Front Cover.  
3 7  
EmptyToner Bottle  
NewToner Bottle  
4
10 to 15 times  
?
CFor optimum copy quality use the recommended Panasonic toner. Store  
toner in a cool dark place. Do not unseal toner before use. Use it as fast as  
possible after unsealing.  
ATTENTION  
107  
Problem Solving  
Removing a Misfed Paper  
I Paper Misfeed Indicators and Locations  
When a paper misfeed occurs, the Misfeed Indicator and the misfeed  
location(s) will be displayed on the Touch Panel Display.  
B4·FLS  
DA-FS330  
DA-FS355  
DA-FS600 DA-FS605  
J
D C  
E
H
B
I
F
G
A
Misfed Location Indicator  
CIndicates to open each cover, check  
and remove any misfed paper.  
(See pages 109 - 118)  
Paper Misfeed Locations  
Finisher  
H: Finisher (See page 109)  
A:System Console (See page 117)  
B: Paper Entry Area (See page 114)  
C:Paper Transport Area (See page 114)  
D:Paper Exit/Fuser Area (See page 115)  
E: ADU Area (See page 116)  
Copier  
ADU  
Paper Feed Unit  
LCT  
F: Reverse Area (See page 115)  
G:LCT Large Capacity Paper Tray Area (See page 117)  
J: i-ADF (See page 118)  
i-ADF  
CMake sure that the Misfeed Indicator goes off after removing the misfed paper.  
The Misfeed Indicator will not go off if the paper is still jammed in the copier. Check  
again and remove all misfed paper.  
NOTE  
108  
Problem Solving  
I 2-Bin Finisher  
(DA-FS600/FS605)  
CMake sure that the Misfeed Indicator  
resets after removing all misfed paper.  
Misfed Paper  
1 4  
Misfed Paper  
Punch Cover  
Finisher  
2
3
5
Push  
Release button  
Finisher Upper Cover  
Inner Cover  
When the Punch Unit is  
installed:  
Punch Cover  
6
7
8
Misfed Paper  
Transport  
Cover  
Misfed Paper  
Close the Finisher Upper  
Cover.  
Return the Finisher to the  
original position.  
I
109  
Problem Solving  
Removing a Misfed Paper  
I 2-Bin Saddle-Stitch Finisher  
(DA-FS605 only)  
CMake sure that the Misfeed Indicator  
resets after removing all misfed paper.  
Misfed Paper  
Finisher  
1 5  
Saddle  
Exit Cover  
Push  
Release button  
Misfed Paper  
6
2
3
4
Lower Front  
Cover  
Infeed  
Cover  
Close the Lower Front Cover.  
7
8
Return the finisher to the original  
position.  
Push and Turn  
110  
Problem Solving  
I2-Bin Finisher (DA-FS330)  
CMake sure that the misfeed indicator  
resets after removing all misfed paper.  
When paper cannot be removed:  
Finisher Guide  
#
Upper Cover  
1
2
4
$
Misfed Paper  
#Pull out the finisher.  
When the misfed paper is not found:  
$Pull out the trash box.  
(See Page 87)  
%Open the stapler cover.  
5
#
(See Page 86)  
$
Knob B  
#Close the staple cover and  
install the trash box.  
6
$Return the finisher to original  
position.  
#
3
Knob A  
$
Misfed Paper  
I
111  
Problem Solving  
Removing a Misfed Paper  
I1-Bin Saddle-Stitch Finisher (DA-FS355)  
CMake sure that the misfeed indicator  
resets after removing all misfed paper.  
Misfed Paper  
1 4  
Upper Cover  
Return the finisher to original  
position.  
2 5  
Finisher  
3
Upper Cover  
112  
Problem Solving  
I1-Bin Saddle-Stitch Finisher (DA-FS355)  
CMake sure that the misfeed indicator  
resets after removing all misfed paper.  
1 6  
Finisher  
Misfed Paper  
Inner Cover  
7
8
9
2
3
4
5
Finisher Front Cover  
Misfed Paper  
Lower  
Knob  
Return the finisher to original  
position.  
I
StitchTray  
Close the Finisher Front  
Cover.  
113  
Problem Solving  
Removing a Misfed Paper  
I Paper Transport Area  
I Paper Entry Area  
Right Cover  
1
1
Misfed Paper  
2
2
Transport Release Lever  
3 3  
Paper  
Transport  
Knob  
Push and Turn  
4
5
4
5
Ensure to close the Front  
Cover.  
Push back the Paper Tray 1 or 2.  
Close the Right Cover.  
114  
Problem Solving  
I Paper Exit/Fuser Area  
CMake sure that the Misfeed Indicator  
resets after removing all misfed paper.  
Magnet  
1 4  
Front Cover  
Heat Roller Cover  
2
3
5
Caution  
heated  
surface  
Exit Cover  
Ensure to close the Heat Roller  
Cover, Exit Cover and the Front  
cover.  
6
Fuser Knob  
I Reverse Area  
2
I
Close the Left Cover.  
1
3
Left Cover  
115  
Problem Solving  
Removing a Misfed Paper  
I Automatic Duplex Unit (ADU)  
CMake sure that the Misfeed Indicator  
resets after removing all misfed paper.  
1 5  
Knob 5 (Right)  
2
1
6
2
3
4
Knob 5 (Left)  
Transport Release Lever  
Push back the ADU into the copier.  
7
8
Push and turn  
Automatic Duplex Unit  
1
Ensure to close the Front Cover.  
2
9
Knob 5 (Centre)  
116  
Problem Solving  
I System Console  
I Large Capacity Paper Tray  
(DA-MA301)  
(DA-DS601/DS602)  
#Hold the latch and slide the large  
capacity paper tray to the right.  
Right Cover Lower  
1
2
3
4
1
Misfed Paper  
Latch  
Door  
Misfed Paper  
Misfed Paper  
2
3
#Close the door.  
$Return the large capacity paper  
tray to original position.  
Push back the Paper Tray 3 or 4.  
Close the Right Cover Lower.  
I
117  
Problem Solving  
Removing a Misfed Paper  
I i-ADF  
CMake sure that the Misfeed Indicator  
resets after removing all misfed paper.  
ADF Cover  
1 5  
Misfed  
Paper  
2
3
4
6
7
Inner Cover  
ADFTray  
Misfed Paper  
Exit Guide  
Misfed Paper  
Green  
LabelledTab  
Close the ADF.  
8
Exit Guide  
118  
Troubleshooting  
Before Calling Service  
Check  
Action  
Unit Does Not Operate  
Check if the Power Switches (Main Power  
Switch on the back and Power Switch on the  
Left Side of the machine) are turned ON and if  
the power cord is plugged into the AC outlet.  
Does the display light?  
Does the Energy Saver key flash (or light)  
and displays are turned OFF?  
(See page 56)  
Press Energy Saver key on the control  
panel.  
Does any of the U## codes and messages  
appear on the display?  
(U1, U4, U6, U7, U9....etc.,)  
Perform actions in accordance with each  
message.  
Add Staples  
(DA-FS600/FS605: See page 85)  
(DA-FS330  
(DA-FS355  
Remove all jammed staples.  
: See page 90)  
: See page 94)  
Does the Add Staples indicator and  
message appear on the display?  
(DA-FS600/FS605: See page 87)  
(DA-FS330  
(DA-FS355  
: See page 91)  
: See page 95)  
Does the Add Paper indicator and  
message appear on the display? (J)  
Add paper. (See page 105)  
Does the paper misfeed indicator and  
message appear on the display? (I)  
Remove the misfed paper. (See page 108)  
Turn the Main Power Switch on the Back  
and the Power Switch on the Left Side of  
the machine to the OFF position, then back  
ON again. If the error code does not clear,  
call your Service provider.  
Does E#-## indicator and message appear  
on the display?  
The machine would not accept the next job  
during operation, instructed job would not  
be accepted for long time period or job  
would not be completed.  
Turn the Power Switch Off/On.  
Light Copies  
Does the exposure indicator say  
LIGHTER?  
Touch the DARKERbutton.  
Replace the Toner Bottle.  
(See page 107)  
Does the Add Toner indicator and message  
appear on the display? (?)  
119  
Troubleshooting  
Before Calling Service  
Check  
Action  
Marked Copies  
Is the copier Platen Glass or Platen Sheet  
dirty?  
Clean the Platen Glass or Sheet.  
(See below)  
Cover the original with a sheet of white  
paper before copying or lighten the  
exposure setting.  
Is the original an OHP film or a dark  
original?  
I User Error Codes (U Code)  
Code  
Check Points  
Code  
Check Points  
U1  
U4  
U6  
U7  
U9  
Front Cover is open.  
U18  
U20  
U21  
U30  
U31  
U32  
U33  
U34  
U35  
U90  
Total Copy Count is limit, consult your Key Operator.  
Finisher is pull out.  
ADF is open.  
Right Cover is open.  
Right Cover Lower is open.  
Left Cover is open.  
ADF is opened while scanning from ADF.  
Punch Dust Cover is open.  
Paper is remained in the Saddle-Stitcher Unit.  
Finsher Infeed/Inner Cover is open. (DA-FS605/FS355)  
Stapler of Saddle Stitcher Unit is incorrectly (DA-FS605/FS355)  
Finisher Lower Front Cover is open.(DA-FS605)  
Saddle Exit Cover is open. (DA-FS605)  
Need to replace the battery.  
Finisher Staple Cover/Upper Cover is open.  
Trash Box is not installed. (DA-FS330)  
U12  
U13  
U15  
U16  
Low Toner.  
Call your Service provider.  
Call your Service provider.  
I If the measures outlined above do not solve the problem, call your Service provider.  
Copier Care  
I As a rule, clean weekly.  
Platen Sheet  
Platen Glass/Platen Sheet  
#Wipe marks off with a cloth and a neutral  
detergent.  
$Wipe again with a dry cloth.  
Platen (glass)  
120  
Troubleshooting  
Replacing the Battery  
The copier has an internal battery (Product No.: CR2032) which maintains the date and  
time. In the event the battery requires replacement, the following message will be displayed.  
I Battery Replacement Message  
U90  
I Battery Replacement Procedure  
Data LED  
Turn the Power Switch OFF.  
Open the Front Cover.  
Pull out the Battery Holder located  
directly under the Data LED of the  
Control Panel.  
1
#Remove the Battery.  
1
$Install the new Battery.  
2
2
NOTE:  
When the battery is placed in the  
holder ensure the + side is up.  
Data LED  
Reinstall the Battery Holder.  
3
Ensure to close the Front Cover.  
Turn the Power Switch ON.  
Set the date and time.  
(See page 69)  
4
CThe service life of the battery is approximately 1 year under normal use.  
ATTENTION  
CAUTION  
!
denotes hazards that could result in minor injury or damage to the machine.  
THIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY  
REPLACED.  
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO  
THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.  
121  
Specifications  
I DP-6010/4510/3510 (Copier)  
Type  
Desk Top  
PlatenType  
Fixed  
Acceptable Originals  
Copying Method  
Fixing Method  
Imaging Method  
Resolution  
Sheets, Books (max. A3)  
Laser Electrophotography  
Heat Roller Fixing  
Dry-Type Two component imaging  
Maximum: 600 dpi  
Operation Panel  
Maximum Copy Size  
Void Area  
Touch Panel Display  
A3 - A5 via paper tray  
Maximum: 5 mm  
DP-6010/4510: Approx. 180 seconds (20°C)  
Warm UpTime  
DP-3510  
: Approx. 30 seconds (20°C)  
DP-6010: 3.5 seconds  
DP-4510: 4.5 seconds  
DP-3510: 5.8 seconds  
(A4 , from 1st tray, Platen)  
First CopyTime  
DP-6010: 60 cpm (A4 size)  
DP-4510: 45 cpm (A4 size)  
DP-3510: 35 cpm (A4 size)  
Multi-Copy Speed  
Enlargement Ratios  
Reduction Ratios  
Paper Feed  
Preset: 115 %, 122 %, 141 %, 173 %, 200 %  
Variable: from 101 - 400 % in 1 % increments  
Preset: 87 %, 82 %, 71 %, 58 %, 50 %  
Variable: from 99 - 25 % in 1 % increments  
Paper tray (1550 sheets + 550 sheets) + Sheet bypass (50 sheets)  
+ System Console (1100 sheets)  
PaperWeight  
Paper Tray: 60 - 90 g/m2 (Bypass: 55 - 133 g/m2)  
Maximum: 999 sheets (Optional Exit Tray capacity is 250 sheets)  
220 - 240 V AC, 50 Hz, 6.5 A  
Quantity Selector  
Electrical Consumptions  
Energy Consumption  
Dimensions (W × D × H)  
Weight  
1.45 kW  
600 × 753 × 735 mm  
131 kg: DP-6010/4510  
128 kg: DP-3510  
Temperature: 10 - 30°C Relative Humidity: 30 - 80 %  
Operating Environment  
(However, the humidity should be 70 % or less at a temperature of 30°C, and  
the temperature should be 27°C or less at a humidity level of 80 %.)  
CSpecifications are subject to change without notice.  
122  
Specifications  
I i-ADF (Standard)  
Tray Capacity  
Paper Size  
Maximum 70 sheets 80 g/m2  
A5/A4/B4·FLS/A3  
50 - 105 g/m2/1-sided  
PaperWeight  
64 - 105 g/m2/2-sided  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Supplied from the copier  
600 × 583 × 138 mm  
14.5 kg  
I System Console 1 (DA-DS601)  
Paper Tray × 1  
Storage Tray × 1  
Combination  
Paper Size  
PaperWeight  
A5/A4/B4·FLS/A3  
60 - 90 g/m2  
Paper Capacity  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Maximum 550 sheets × 1 (80 g/m2)  
Supplied from copier  
600 × 730 × 290 mm  
28.8 kg  
Applicable Models  
DP-3510/4510/6010  
I System Console 2 (DA-DS602)  
Combination  
Paper Tray × 2  
Paper Size  
PaperWeight  
A5/A4/B4·FLS/A3  
60 - 90 g/m2  
Paper Capacity  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Maximum 550 sheets × 2: 80 g/m2  
Supplied from copier  
600 × 730 × 290 mm  
30 kg  
Applicable Models  
DP-3510/4510/6010  
I 3000-Sheet Tray (LCT) (DA-MA301)  
Paper Size  
PaperWeight  
A4  
60 - 90 g/m2  
Paper Capacity  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Maximum 3000 sheets: 75 g/m2  
Supplied from copier  
295 × 445 × 505 mm  
12.3 kg  
Applicable Models  
DP-3510/4510/6010  
123  
Specifications  
I 2-Bin Finisher (DA-FS600)  
Mode  
1 Bin and 2 Bin  
Paper Size  
1 Bin and 2 Bin  
PaperWeight  
Paper Capacity  
1 Bin and 2 Bin  
Staple  
Paper Size  
Non-sort/Sort/Staple  
A5/A4/A4 R/B4/FLS/A3  
55 - 133 g/m2: Non-sort mode  
Maximum: 1000 sheets / 30 set (Stapling mode)  
A4/A4 R/B4/A3  
64 - 80 g/m2  
PaperWeight  
Capacity  
2-50 sheets: A4 (80 g/m2)  
2-30 sheets: A4 R/B4/A3 (80 g/m2)  
Rear 1/Front 1/Middle 2-Point Staple  
Supplied from copier  
670 × 613 × 1500 mm  
34.5 kg  
Point  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Applicable Models  
DP-4510/6010  
I 2-Bin Saddle-Stitch Finisher (DA-FS605)  
Mode  
1 Bin and 2 Bin  
Tray  
Non-sort/Sort/Staple  
Saddle-Stitch  
Paper Size  
1 Bin and 2 Bin  
Tray  
A5/A4/A4 R/B4/FLS/A3  
A4 R/B4/A3  
PaperWeight  
Paper Capacity  
1 Bin and 2 Bin  
Tray  
Staple  
55 - 133 g/m2: Non-sort mode  
Maximum: 1000 sheets / 30 set (Stapling mode)  
Maximum: 25 set  
Paper Size  
PaperWeight  
Capacity  
A4/A4 R/B4/A3  
64 - 80 g/m2  
2-50 sheets: A4 (80 g/m2)  
2-30 sheets: A4 R/B4/A3 (80 g/m2)  
Rear 1/Front 1/Middle 2-Point Staple  
Point  
Saddle-Stitch  
Paper Size  
PaperWeight  
A4 R/A3  
64 - 80 g/m2  
Stack  
11-15 sheets: 10 sets/6-10 sheets: 15 sets/2-5 sheets: 25 sets  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Supplied from copier  
670 × 613 × 1500 mm  
52.5 kg  
Applicable Models  
DP-4510/6010  
I Punch Unit (DA-SP31)  
Paper Size:  
PaperWeight:  
Applicable Models:  
A4/A3: 4-hole  
64 - 133 g/m2  
DA-FS600/FS605  
124  
Specifications  
I 2-Bin Finisher (DA-FS330)  
Mode  
1 Bin  
2 Bin  
Non-sort/Sort  
Non-sort/Sort/Staple  
Paper Size  
1 Bin  
A5/A4/A4 R/B4/FLS/A3  
A4  
2 Bin  
Paper Weight  
Paper Capacity  
1 Bin  
55 - 133 g/m2: Non-sort mode  
100 sheets  
2 Bin  
Maximum: 1000 sheets / 30 set (Stapling mode)  
Staple  
Paper Size  
Paper Weight  
Capacity  
A4  
64 - 80 g/m2  
2 - 30 sheets: 80 g/m2  
1-Point Staple  
Point  
Punch  
A4/A3: 4-hole  
60 - 105 g/m2  
Supplied from copier  
420 × 520 × 430 mm  
15.5 kg  
Paper Size  
Paper Weight  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
Applicable Model  
DP - 3510  
I 1-Bin Saddle-Stitch Finisher (DA-FS355)  
Mode  
Bin  
Tray  
Non-sort/Sort/Staple  
Saddle-Stitch  
Paper Size  
Bin  
A5/A4/A4 R/B4/FLS/A3  
A4 R/B4/A3  
Tray  
Paper Weight  
Paper Capacity  
Bin  
55 - 133 g/m2: Non-sort mode  
Maximum: 1000 sheets / 30 set (Stapling mode)  
Maximum: 20 set  
Tray  
Staple  
Paper Size  
Paper Weight  
Capacity  
A4/A4 R/B4/A3  
64 - 80 g/m2  
2 - 50 sheets: A4/A4 R (80 g/m2)  
2 - 25 sheets: B4/A3 (80 g/m2)  
Rear 1/Front 1/Middle 2-Point Staple  
Point  
Saddle-Stitch  
Paper Size  
A4 R/B4/A3  
Paper Weight  
Stack  
Electrical Requirements  
Dimensions (W × D × H)  
Weight  
64 - 80 g/m2  
6 - 10 sheets: 10 sets/1 - 5 sheets: 20 sets  
Supplied from copier  
550 × 600 × 464 mm  
27.2 kg  
Applicable Model  
DP-3510  
I Punch Unit (DA-SP41)  
A4/A3 : 4-hole  
64 - 133 g/m2  
DA-FS355  
Paper Size  
Paper Weight  
Applicable Model  
CSpecifications are subject to change without notice.  
125  
Options and Supplies  
I The DP-6010/4510/3510 is a digital photocopier which can produce images with great clarity.  
Furthermore, its copying functionality can also be greatly enhanced by the addition of the following  
options and supplies.  
We hope you find that the wide ranging capabilities will make your office-place more productive and  
efficient.  
I Options  
Part Name  
System Console 1  
Part No.  
DA-DS601  
DA-DS602  
DA-MA301  
DA-FS600  
DA-FS605  
DA-FS330  
DA-FS355  
Remarks  
550 Sheet Paper Tray × 1  
550 Sheet Paper Tray × 2  
3000 Sheet Paper Tray  
For DP-6010/4510  
For DP-6010/4510  
For DP-3510  
System Console 2  
3000-Sheet Tray (LCT)  
2-Bin Finisher  
2-Bin Saddle-Stitch Finisher  
2-Bin Finisher  
1-Bin Saddle-Stitch Finisher  
For DP-3510  
Punch Unit for DA-FS600/605 DA-SP31  
For DP-6010/4510  
For DP-3510  
Punch Unit for DA-FS355  
Exit Tray  
DA-SP41  
DA-XT600  
DA-SM16B  
DA-SM64B  
DA-SM28B  
DA-HD60  
For DP-6010/4510/3510  
For Electronic Sorting  
For Electronic Sorting  
For Electronic Sorting  
For DP-6010/4510/3510  
Image Memory (16 MB)  
I
mage Memory (64 MB)  
Image Memory (128 MB)  
Hard Disk Drive  
PCL6 Emulation Kit  
Network Scanner Kit  
F-ROM Board  
DA-PC600  
DA-NS600  
DA-EM600  
MC-PS600  
DA-PW600  
Printer Controller for PCL6  
Network Scanner  
F-ROM 8MB  
PS/PCL6  
Printer Controller for PS/PCL6  
For Finisher (Except Europe/DP-3510 for Europe)  
Power Supply for Finisher  
PCL6 is a Page Description Language of the Hewlett-Packard Company.  
NOTE  
126  
Options and Supplies  
I Supplies  
Part Name  
Part No.  
FQ-SS66  
FQ-SS50  
Remarks  
Staple Cartridge  
Staple Cartridge  
Staple Cartridge Refills (3) for DA-FS600/605  
Staple Cartridge Refills (3) for DA-FS605  
(Saddle-Stitch)  
Staple Cartridge  
Staple Cartridge  
Toner  
DQ-SS35  
FQ-SS32  
Staple Cartridge Refills (3) for DA-FS355  
Staple Cartridge Refills (3) for DA-FS330  
Toner for DP-3510/4510  
DQ-TU24D  
DQ-TU35D  
Toner  
Toner for DP-6010  
127  
INDEX  
E
1 \ 2 Copy......................................................... 28  
1-Bin Saddle-Stitch Finisher (DA-FS355)......... 92-95  
2 \ 1 Copy......................................................... 28  
2 \ 2 Copy......................................................... 28  
2 Bin Finisher (DA-FS600) ............................. 83-90  
2 Bin Saddle-Stitch Finisher (DA-FS605) ....... 83-90  
2 in 1 Copy ......................................................... 31  
2 Page Copy ....................................................... 30  
2-Bin Finisher (DA-FS330)............................. 88-91  
2-Sided/Orig. \ Copy Button.............................. 27  
3000-Sheet Tray (LCT)........................................ 82  
4 in 1 Copy ......................................................... 31  
8 in 1 Copy ......................................................... 31  
Edge ................................................................... 41  
Editing the Address Book .......................... 100-101  
ENERGY SAVER Key......................................... 13  
Energy Saver Mode ............................................ 56  
Exit Tray .............................................................. 82  
Expansion Board ................................................ 82  
F
File Edit .............................................................. 52  
Finisher Functions Indication ........................ 14, 15  
For Your Safety ..................................................... 9  
Form Overlay ...................................................... 53  
Full Size................................................................ 4  
Full Size Copying ................................................ 16  
Function.............................................................. 60  
Function Categories ............................................. 5  
FUNCTION Key .................................................. 13  
A
Accessories ........................................................ 82  
ACTIVE LED (GREEN)....................................... 13  
Adding a New PCs IP Address...................... 98-99  
Adding Paper ............................................. 105-106  
Address Book .............................................. 98-104  
ALARM LED (RED) ............................................ 13  
Auto Zoom Copying ............................................ 40  
G
GENERAL FUNCTIONS .................................... 61  
GENERAL FUNCTIONS for Key Operator..... 67-70  
H
B
Handling ............................................................. 10  
HDD Unit ............................................................ 82  
Basic Operation .................................................... 4  
Before Calling Service ............................... 119-120  
Book ................................................................... 41  
Book \ 2 Copy .................................................. 29  
Booklet Copy ...................................................... 33  
I
i-ADF (Inverting Automatic Document Feeder) ... 17  
Image Memory ................................................... 82  
Image Repeat copy............................................. 45  
Insertion/Overlay ................................................ 46  
Installation .......................................................... 11  
INTERRUPT Key ................................................ 13  
Interrupt Mode .................................................... 56  
Inverse copy ....................................................... 45  
C
Centering copy ................................................... 45  
Changing the Paper Size ............................... 76-77  
CLEAR Key ........................................................ 13  
Combined FunctionTable ................................... 59  
Completion Notice .............................................. 26  
Completion Notice Button ....................... 14, 15, 26  
Concurrent Copying ............................................ 55  
Control Panel ...................................................... 13  
Copier Care ...................................................... 120  
COPIER SETTINGS ........................................... 62  
Copier Settings for Key Operator ................... 71-73  
Copy Icon ..................................................... 14, 15  
Copy Image and Paper Image Indication .. 14, 15, 16  
COPY Key .......................................................... 13  
Copy Ratio Indication.............................. 14, 15, 16  
Copy Size Indication ..................................... 14, 15  
Cover .................................................................. 47  
J
Job Memory ....................................................... 54  
Job Queue .......................................................... 25  
Job Queue Button................................... 14, 15, 25  
Job Settings Button ................................ 14, 15, 16  
L
Light Copies ..................................................... 119  
M
Machine/User Error Code Indication (E1-01, U13, etc.) .. 14, 15, 120  
Machine Outline with Tray Selection.............. 14, 15  
Main Power Switch ......................................... 4, 15  
Manual Exposure Select Buttons (Lighter and Darker) .. 14, 15, 16  
Manual Skyshot Mode ........................................ 58  
Margin ................................................................ 41  
Marked Copies ................................................. 120  
Memory Capacity ................................................. 4  
Multi-Size Feeding .............................................. 34  
D
Density Indicator (7 steps) ............................ 14, 15  
Department Counter ...................................... 78-79  
Digital Skyshot Mode .......................................... 57  
Document Scanning ........................................... 97  
128  
INDEX  
Rotate-Sort ......................................................... 37  
N
N in 1 Copy ......................................................... 31  
Network Scanner (Option) ........................... 97-104  
Network Settings ................................................ 81  
S
Saddle-Stitch ................................................ 84, 92  
SADF (Single Sheet Automatic Document Feeder) Function .... 35, 36  
SADF/Multi-Size Feed Mode Indication ........ 14, 15  
SCANNER SETTINGS ....................................... 64  
Skyshot Mode..................................................... 57  
Sleep Mode ........................................................ 56  
Sort .................................................................... 37  
Sort/Finish .......................................................... 37  
Specifications ................................................... 122  
Stamping (Date Stamp) ...................................... 43  
Stamping (Issue Number Stamping) ................... 44  
Stamping (Page Numbering) .............................. 42  
Staple-sort .............................................. 84, 88, 92  
STOP Key ........................................................... 13  
Supplies............................................................ 127  
Supplying the Saddle Stitcher Unit with Staples (DA-FS605) .... 86  
System Console ................................................. 82  
O
OHP Interleaving ................................................ 49  
Operation Chart .................................................... 4  
Options and Supplies ................................ 126-127  
Original Icon ................................................. 14, 15  
Original Image Indication ........................ 14, 15, 16  
Original Mode Select Button (Text; Text/Photo; Photo) ... 14, 15, 16  
Original Size Indication ................................. 14, 15  
Overlay ............................................................... 51  
P
Page Insertion .................................................... 48  
Paper Level and Size Indication .................... 14, 15  
Paper Misfeed Indicators and Locations ........... 108  
Paper Tray Selection Key ........................ 14, 15, 16  
Presentation ....................................................... 50  
PRINT DATA LED (GREEN) ............................... 13  
Printer Setting for Key Operator .......................... 74  
PRINTER SETTINGS ......................................... 65  
Problem Solving ........................................ 105-118  
Proof Copying ..................................................... 19  
Proof Set Button ..................................... 14, 15, 19  
Punch ..................................................... 84, 91, 92  
Punch disposal ................................................... 95  
T
Tandem/Remote Button .......................... 14, 15, 20  
Tandem/Remote Copying ................................... 20  
Tandem/Remote Copy Settings (Deleting) .......... 24  
Tandem/Remote Copy Settings (Editing) ............ 23  
Tandem/Remote Copy Settings (Registering) ..... 21  
Tandem/Remote Copy Settings (Registration) .... 22  
Tandem/Remote Key Indication .............. 14, 15, 20  
T
o delete an entry from the Address Book........... 102  
R
Toner and Paper ................................................. 10  
Touch Panel Display ....................................... 5, 14  
Troubleshooting ......................................... 119-121  
Reduction or Enlargement .................................... 4  
Reduction or Enlargement Copying .................... 18  
Removing a Misfed Paper.......................... 108-118  
1-Bin Saddle-Stitch Finisher (DA-FS355) ... 112, 113  
2-Bin Finisher (DA-FS330) ............................ 111  
2-Bin Finisher (DA-FS600/FS605) ................. 109  
2-Bin Saddle-Stitch Finisher (DA-FS605 only) ......... 110  
Automatic Duplex Unit (ADU) ........................ 116  
i-ADF ............................................................. 118  
Large Capacity PaperTray (LCT)(DA-MA301) ..... 117  
Paper Entry Area ........................................... 114  
Paper Exit/Fuser Area ................................... 115  
Paper Transport Area ..................................... 114  
Reverse Area................................................. 115  
System Console (DA-DS601/602) ................. 117  
Removing the Punch Hole Residue (DA-SP31)........87  
Replacing the Battery ....................................... 121  
Replacing the staple cartridge (DA-FS355) ......... 94-95  
Replacing the staple cartridge (DA-FS330) ... 90-91  
Replacing the Staple Cartridge (DA-FS600/FS605) .... 85-86  
Replacing the Toner Bottle ................................ 107  
Reserve a Job Button ............................. 14, 15, 55  
RESET Key ........................................................ 13  
Rotate Mode Indication ........................... 14, 15, 37  
Rotate-Group...................................................... 37  
U
Unit Does Not Operate ..................................... 119  
Useful Office Functions ........................................ 3  
User Error Codes (U Code) .............................. 120  
Using the Sheet Bypass ..................................... 17  
V
Ventilation ........................................................... 10  
W
Warning Indications ...................................... 14, 15  
Weekly Timer ...................................................... 80  
Z
Zoom Copying .................................................... 39  
Zoom/Effects ...................................................... 38  
129  
For Service, Call:  
Matsushita Electric Industrial Co., Ltd.  
Osaka 542-8588, Japan  
S0802  
DZSD001600-1  
August 2002  
Printed in Japan  

Lexmark All In One Printer User Manual
Mitsubishi Electronics Msz Ga25va User Manual
Murphy Bceg 24 10 User Manual
Panasonic Agep50 User Manual
Samsung Avmcc052ea B 0 User Manual
Samsung Um 18a1 B1 B2 User Manual
Savin 2345 User Manual
Sharp Ar 5316 User Manual
Toshiba Air Conditioner Rav Sm1606bt Tr User Manual
Trion He Series User Manual