Lexmark S600 User Manual

Lexmark Interact S600 Series Quick Reference  
Guide  
May 2009  
Contents  
Contents  
3
Contents  
4
About your printer  
Finding information about the printer  
The Quick Reference Guide contains basic instructions on how to accomplish common printer tasks like printing,  
copying, and scanning. It also includes information on troubleshooting common printer setup problems.  
For additional information about the printer, see the following:  
What are you looking for?  
Find it here  
Initial setup instructions  
Quick Setup Sheet  
Hardware Setup Wizard1  
Additional setup and instructions for using the  
printer  
ComprehensiveUser'sGuide installedautomaticallywith theprinter  
software.1  
After installing your printer, you can access the User's Guide from  
the printer program folder:  
For Windows users  
1 Click or Start.  
2 Click All Programs or Programs, and then select the printer  
program folder from the list.  
3 Select View User's Guide.  
For Macintosh users  
1 From the Finder desktop, double-click the printer folder.  
2 Double-click User's Guide.  
Software Help installed automatically with the printer software.1  
Help using the printer software  
Click Help from any printer software program or application.  
The latest supplemental information, updates,  
online technical support, and telephone support  
Support Web site—support.lexmark.com  
1 Available on the installation software CD and on the Lexmark Web site at www.lexmark.com/publications/.  
Minimizing your printer's environmental impact  
We are committed to protecting the environment and are continually improving our printers to reduce their  
environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's  
environmental impact even further.  
Conserving energy  
Activate Eco-Mode. This feature sets the screen brightness to low and sets the printer to change to Power Saver  
mode after the printer is left idle for 10 minutes.  
Select the lowest Power Saver timeout. The Power Saver feature puts the printer in a minimum-power standby  
mode after the printer has been idle for a set amount of time (the Power Saver timeout).  
About your printer  
5
     
Share your printer. Wireless/network printers allow you to share a single printer among multiple computers,  
thus conserving energy and other resources.  
Conserving paper  
Activate Eco-Mode. On selected printer models, this feature sets the printer to automatically print on both sides  
of the paper (duplex) for copy and fax jobs and for printing in Windows.  
Print more than one page image on one side of the paper. The “Pages per sheet” feature allows you to print  
multiple pages on one sheet. You can print up to 8 page images on one side of a sheet of paper.  
Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or automatically  
(depending on your printer model).  
Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print Preview dialog,  
or the printer display (depending on your printer model).  
Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save them to a  
computer program, application, or flash drive for presentation.  
Use recycled paper.  
Conserving ink  
Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than normal and  
are ideal for printing documents that are mostly text.  
Use High Yield cartridges. Inks in High-Yield cartridges allow you to print more pages with fewer cartridges.  
Clean the printhead. Before replacing and recycling your ink cartridges, try using the “Clean Printhead” and  
“Deep Clean Printhead” features. These features clean the printhead nozzles to improve the quality of your prints.  
Recycling  
Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To return  
an ink cartridge, go to www.lexmark.com/recycle. Follow the instructions to request a postage-paid bag.  
Recycle the product packaging.  
Recycle your old printer instead of throwing it away.  
Recycle paper from discarded print jobs.  
Use recycled paper.  
To read the Lexmark Environmental Sustainability Report, see www.lexmark.com/environment.  
Printer models  
The installation software CD that came with your printer works for this printer model:  
Lexmark S605  
About your printer  
6
 
Printer features  
Your printer comes with full features that will help you manage and accomplish printing and imaging tasks:  
Wireless or Ethernet networking. Print and scan from virtually anywhere in your home or office over a secure  
wireless or Ethernet network, as well as share the printer among multiple computers.  
Intuitive touch screen. Use the full-featured color touch screen for fast, easy access to all the printer menus. The  
large screen also allows you to view, edit, and print photos directly from your digital camera or memory device  
without using a computer.  
Print. Print documents and PDFs faster from a computer, from a USB flash drive, or from a Bluetooth device.  
Built-in two-sided printing lets you save money and the environment.  
Copy. Copy documents and photos with one-touch, computer-free black or color copying. Enjoy 25% to 400%  
reduction and enlargement capacity.  
Scan. Scan thick books, reports, and other multiple-page documents easily with the high resolution scanner.  
Easily scan to a memory device or to multiple laptops or PCs over a secure wireless network with up to 1200 x  
4800 optical resolution.  
Photo printing. Print high quality, long-lasting photos directly from digital memory cards, PictBridge-enabled  
digital cameras, and USB flash drives. Select photos to print using the proof sheet for computer-free printing.  
SmartSolutions. Simplify printer tasks that you frequently repeat by creating and customizing your printer  
solutions. Using the SmartSolutions toolkit on the Web, you can choose the printer tasks that you often perform,  
apply your custom settings, and download them to your printer as shortcuts that you can easily access anytime.  
You can also customize your printer with solutions that display your online calendars, RSS feeds, and more.  
Eco-Mode. Save energy and paper by activating Eco-Mode. It automatically dims the printer display light, puts  
the printer into Power Saver mode after 10 minutes of inactivity, and prints on both sides of the paper for copy  
jobs and for printing in Windows.  
About your printer  
7
 
Understanding the parts of the printer  
Use the  
To  
Paper guide adjustment lever Adjust the paper guides.  
1
2
3
4
5
Paper support  
Load paper.  
Paper guides  
Keep paper straight when feeding.  
Insert a memory card.  
Memory card slot  
PictBridge and USB port  
Connect a PictBridge-enabled digital camera, a USB Bluetooth adapter, or a flash  
drive to the printer.  
Card reader light  
Check card reader status. The light blinks to indicate that a memory card is being  
accessed.  
6
Wi-Fi indicator  
Paper exit tray  
Printer control panel  
Scanner lid  
Check wireless status.  
7
8
Hold paper as it exits.  
Operate the printer.  
9
Access the scanner glass.  
Prevent items from falling into the paper slot.  
10  
11 Paper feed guard  
About your printer  
8
 
Use the  
To  
Scanner lid  
Scanner glass  
USB port  
Access the scanner glass.  
1
2
3
Scan and copy photos and documents.  
Connect the printer to a computer using a USB cable.  
Warning—Potential Damage: Do not touch the USB port except when plugging in or  
removing a USB cable or installation cable.  
4
5
Power supply with port Connect the printer to a power source.  
Duplex unit  
Print on both sides of a sheet of paper.  
Remove paper jams.  
Printhead  
Install, replace, or remove ink cartridges.  
6
7
Scanner unit  
Access the ink cartridges and printhead.  
Remove paper jams.  
Using the printer control panel  
The following diagrams explain the sections of the printer control panel:  
Note: The icons are displayed when they are selectable on the current screen. If an icon is not displayed, then the  
function is not available.  
About your printer  
9
 
Use  
To  
Turn the printer on and off.  
Power  
1
Switch to Power Saver mode.  
Note: When the printer is on, press to switch to Power  
Saver mode. Press and hold for three seconds to turn  
off the printer.  
Back  
2
3
Return to the previous screen.  
Exit from one menu level to a higher one.  
Touch screen display  
Navigate the printer menus.  
Note: The display is turned off in Power Saver mode. Change settings.  
View printer messages and animation.  
Start  
Start a job, depending on which mode is selected.  
4
5
6
7
Cancel  
Help  
Cancel the current job or task.  
Display Help text and animation.  
Return to the home screen.  
Home  
Understanding the home screen  
After the printer is turned on and a short warm-up period occurs, the display shows the following basic screen which  
is referred to as the home screen. Use the home screen selections to initiate an action, such as copying or scanning,  
or to change printer settings.  
About your printer  
10  
 
Display item  
Description  
Copy  
Access the copy menu and make copies.  
1
Scan  
Access the scan menu and scan documents.  
2
3
Memory Device View, select, print, or attach photos and documents to e-mail.  
Note: This icon appears only when you return to the home screen while a memory card, flash  
drive, or PictBridge-enabled camera is connected to the printer.  
or  
PictBridge  
SmartSolutions Open the SmartSolutions menu.  
4
Ink levels  
5
6
Display the current ink levels of the installed tanks.  
Access cartridge maintenance and information functions.  
Setup  
Access the setup menu and change printer settings.  
About your printer  
11  
Display item  
Description  
2-Sided  
Print on both sides of a sheet of paper.  
7
Eco-Mode  
Activate Eco-Mode to select the following options:  
Print on both sides of the paper (duplex).  
8
Change to Power Saver mode after the printer is left idle for 10 minutes.  
Set screen brightness to low.  
Navigating menus using the printer control panel  
Touch-screen models  
To perform a new task, always start from the home screen. Touch  
to open the home screen.  
To scroll through the menus, drag the scroll bar or touch the arrows on the display.  
To open a menu or submenu, touch the menu name or icon.  
To select a setting, touch a menu item, and then touch Accept or OK to save the setting.  
Arrow-button models  
To scroll through the menus, use the arrow buttons on the printer control panel, and then press to open menus  
and submenus.  
Press to select and save a setting.  
About your printer  
12  
 
Using memory cards and flash drives  
Using a memory card or flash drive with the printer  
Memory cards and flash drives are storage devices frequently used with cameras and computers. You can remove  
the memory card from the camera or the flash drive from the computer and insert it directly into the printer.  
1 Insert a memory card into the card slot or a flash drive into the USB port.  
Inserting a memory card  
Inserting a flash drive  
Notes:  
Notes:  
Insert the card with the brand name label facing right. The flash drive uses the same port that is used for a  
PictBridge camera cable.  
Make sure any arrows on the card point toward the  
An adapter may be necessary if your flash drive does  
printer.  
not fit directly into the port.  
If necessary, connect the memory card to the adapter  
that came with it.  
Make sure that the memory card inserted is supported  
by the printer. For more information, see “Supported  
Warning—Potential Damage: Do not touch any cables, any network adapter,  
any connector, the memory device, or the printer in the areas shown while  
actively printing, reading, or writing from the memory device. A loss of data can  
occur.  
2 The Memory Device screen appears on the display.  
Notes:  
If the printer does not recognize the memory device, then remove and reinsert it.  
If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is  
in the card slot, then a message appears on the display prompting you to choose which memory device to use.  
About your printer  
13  
 
Supported memory cards and file types  
Memory Card  
File Type  
Documents:  
Secure Digital (SD)  
.doc (Microsoft Word)  
.xls (Microsoft Excel)  
Secure Digital High Capacity (SDHC)  
Micro Secure Digital (with adapter) (Micro SD)  
Mini Secure Digital (with adapter) (Mini SD)  
MultiMedia Card (MMC)  
Reduced Size MultiMedia Card (with adapter) (RS-MMC)  
MultiMedia Card mobile (with adapter) (MMCmobile)  
Memory Stick  
.ppt (Microsoft PowerPoint)  
.pdf (Adobe Portable Document Format)  
.rtf (Rich Text Format)  
.docx (Microsoft Word Open Document Format)  
.xlsx (Microsoft Excel Open Document Format)  
.pptx (Microsoft PowerPoint Open Document Format)  
.wpd (WordPerfect)  
Memory Stick PRO  
Memory Stick Duo (with adapter)  
Memory Stick PRO Duo (with adapter)  
xD-Picture Card  
Images:  
JPEG  
TIFF  
xD-Picture Card (Type H)  
xD-Picture Card (Type M)  
About your printer  
14  
 
Ordering and replacing supplies  
Ordering ink cartridges  
Page yields available at www.lexmark.com/pageyields. For best results, use only Lexmark ink cartridges.  
Lexmark S600 Series models  
Return Program Cartridge1 Regular cartridge2  
Item  
Black cartridge  
100  
100A  
High yield black cartridge  
Yellow color cartridge  
High yield yellow color cartridge  
Cyan color cartridge  
100XL  
100  
100XLA  
100A  
100XL  
100  
100XLA  
100A  
High yield cyan color cartridge  
Magenta color cartridge  
High yield magenta color cartridge  
100XL  
100  
100XLA  
100A  
100XL  
100XLA  
1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.  
2 Available only on the Lexmark Web site at www.lexmark.com.  
Replacing ink cartridges  
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately  
after removing the old ones or the ink remaining in the printhead nozzles may dry out.  
1 Turn on your printer.  
2 Open the printer.  
Note: The printhead moves to the cartridge installation position.  
Ordering and replacing supplies  
15  
       
3 Press the release tab, and then remove the used ink cartridge or cartridges.  
4 Install each ink cartridge. Use two hands to install the black cartridge.  
Note: Install the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to  
air.  
5 Close the printer.  
Maintaining ink cartridges  
In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle every  
week if it is plugged into an electrical outlet. It will briefly come out of Power Saver mode or will temporarily power  
on if it is turned off.  
Aligning the printhead  
If the characters or lines on your printer image appear jagged or wavy, then you may need to align the printhead.  
Using the printer control panel  
1 Load plain paper.  
2 From the home screen, navigate to Align Printer:  
> More Options > Align Printer.  
An alignment page prints.  
Note: Do not remove the alignment page until printing is finished.  
Ordering and replacing supplies  
16  
 
Using the printer software  
For Windows users  
1 Load plain paper.  
2 Click or Start.  
3 Click All Programs or Programs, and then select the printer program folder from the list.  
4 Select Printer Home.  
5 Choose your printer from the printer drop-down list.  
6 From the Maintenance tab, click Align cartridges.  
7 Follow the instructions on the computer screen.  
For Macintosh users  
1 Load plain paper.  
2 From the Finder desktop, double-click the printer program folder.  
3 Select Printer Utility from the list.  
4 From the Maintenance tab of the Printer Utility dialog, click Print Alignment Page.  
5 Follow the instructions on the computer screen.  
If you aligned the cartridges to improve print quality, then print your document again. If print quality has not  
improved, then clean the printhead nozzles.  
Cleaning the printhead nozzles  
Poor print quality is sometimes due to clogged printhead nozzles. Clean the printhead nozzles to improve the quality  
of your prints.  
Notes:  
Cleaning the printhead nozzles uses ink, so clean them only when necessary.  
Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.  
If the ink levels are too low, you must replace the ink cartridges before you can clean the printhead nozzles.  
Using the printer control panel  
From the home screen, navigate to Clean Printheador Deep Clean Printhead:  
> More Options > Clean Printhead or Deep Clean Printhead  
A cleaning page prints.  
Using the printer software  
For Windows users  
1 Click or Start.  
2 Click All Programs or Programs, and then select the printer program folder from the list.  
Ordering and replacing supplies  
17  
3 Select Printer Home.  
4 Choose your printer from the printer drop-down list.  
5 From the Maintenance tab, click Clean cartridges.  
6 Follow the instructions on the computer screen.  
For Macintosh users  
1 From the Finder desktop, double-click the printer program folder.  
2 Select Printer Utility from the list.  
3 From the Maintenance tab, select Clean Print Nozzles.  
A cleaning page prints.  
Ordering and replacing supplies  
18  
Using the printer software  
Minimum system requirements  
The printer software requires up to 500 MB of free disk space.  
Supported operating systems  
Microsoft Windows 7 (Web only)1  
Microsoft Windows Vista (SP1)  
Microsoft Windows XP (SP3)  
Microsoft Windows 2000 (SP4 or greater)  
Macintosh PowerPC OS X v10.3.9 or later  
Macintosh Intel OS X v10.4.4 or later  
Linux Ubuntu 8.04 LTS and 8.10 (Web only)1  
Linux OpenSUSE 11.0 and 11.1 (Web only)1  
Linux Fedora 10 (Web only)1  
1 The printer driver for this operating system is available only at support.lexmark.com.  
Installing the printer software  
Note: If you installed the printer software on this computer before but need to reinstall the software, then uninstall  
the current software first.  
For Windows users  
1 Close all open software programs.  
2 Insert the installation software CD.  
If the Welcome screen does not appear after a minute, then launch the CD manually:  
a Click , or click Start and then click Run.  
b In the Start Search or Run box, type D:\setup.exe, where Dis the letter of your CD or DVD drive.  
3 Follow the instructions on the Welcome screen.  
For Macintosh users  
1 Close all open software applications.  
2 Insert the installation software CD.  
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.  
3 Double-click Install.  
4 Follow the instructions on the installation dialog.  
Using the printer software  
19  
     
Using the World Wide Web  
1 Go to the Lexmark Web site at www.lexmark.com.  
2 From the Drivers & Downloads menu, click Driver Finder.  
3 Select your printer, and then select your operating system.  
4 Download the driver and install the printer software.  
Using the Windows printer software  
Software installed during printer installation  
When you set up the printer using the installation software CD, all the necessary software was installed. You may  
have chosen to install some additional programs. The following table provides an overview of various software  
programs and what they can help you do.  
If you did not install these additional programs during initial installation, then reinsert the installation software CD,  
run the installation software, and then select Install Additional Software from the Software Already Installed screen.  
Printer software  
Use the  
To  
Launch applications or programs.  
LexmarkTM Printer Home  
(referred to as Printer Home)  
Access the Fax Solutions software.  
Scan or e-mail a photo or document.  
Edit scanned documents.  
Scan documents to PDF.  
Adjust settings for the printer.  
Order supplies.  
Maintain ink cartridges.  
Print a test page.  
Register the printer.  
Contact technical support.  
Lexmark Fast Pics  
Manage, edit, transfer, and print photos and documents.  
(referred to as Fast Pics)  
Lexmark Toolbar  
Print black or text-only Web pages to save ink.  
Schedule automatic printing of Web pages.  
Access Picnik and edit photos online.  
(referred to as Toolbar)  
Print, scan, or convert local files from Windows.  
Lexmark Tools for Office  
Access your favorite settings in Microsoft Office 2007.  
(referred to as Tools for Office)  
Using the printer software  
20  
 
Use the  
To  
Send a fax.  
Lexmark Fax Solutions  
(referred to as Fax Solutions)  
Receive a fax in three-in-one printers.  
Add, edit, or delete contacts in the built-in phone book.  
Access the Lexmark Fax Setup Utility in four-in-one printers. Use the Fax  
Setup Utility to set the Speed Dial and Group Dial numbers, set Ringing and  
Answering, and print fax history and status reports.  
Abbyy Sprint OCR  
Scan a document and produce text that you can edit with a word-processing  
program.  
Lexmark Wireless Setup Utility  
Set up the wireless printer on a wireless network.  
(referred to as Wireless Setup Utility)  
Change the wireless settings of the printer.  
Note: This program is installed automatically with the printer software if the  
printer has wireless capability.  
Lexmark Service Center  
Troubleshoot the printer.  
(referred to as Service Center)  
Access the printer maintenance functions.  
Contact technical support.  
Notes:  
This program is installed automatically with the printer software.  
You may be prompted to install this program from the Web, depending on  
your printer model.  
Printing Preferences  
When you select File Print with a document open and then click  
Properties, a Printing Preferences dialog appears. The dialog lets you select  
options for the print job, such as the following:  
Select the number of copies to print.  
Print two-sided copies.  
Select the paper type.  
Add a watermark.  
Enhance images.  
Save settings.  
Note: Printing Preferences is installed automatically with the printer software.  
Note: Your printermaynotcomewithsomeofthese programsor some ofthefunctions oftheseprograms,depending  
on the features of the printer that you purchased.  
Using the printer software  
21  
Using the Macintosh printer software  
Software installed during printer installation  
Software resident in the Macintosh OS  
Use the  
To  
Print dialog  
Adjust the print settings and schedule print jobs.  
Printer Services dialog (not available in Mac OS X v10.5  
or later)  
Access the printer utility.  
Troubleshoot.  
Order ink or supplies.  
Contact Lexmark.  
Check theprintersoftwareversioninstalledonthecomputer.  
Printer software  
Applications are installed along with the printer software during installation. These applications are saved in the  
printer folder that appears on the Finder desktop after installation.  
1 From the Finder desktop, double-click the printer folder.  
2 Double-click the icon of the application that you want to use.  
Use the  
To  
Scan photos and documents.  
Lexmark All-In-One Center  
(referred to as All-In-One Center)  
Customize settings for scan jobs.  
Lexmark AIO Setup Utility  
Customize settings for fax jobs.  
(referred to as AIO Setup Utility)  
Create and edit the Contacts list.  
Lexmark Network Card Reader  
View the contents of a memory device inserted into a network printer.  
(referred to as Network Card Reader)  
Transfer photos and PDF documents from a memory device tothe computer  
over a network.  
Lexmark Printer Utility  
Get help with cartridge installation.  
Print a test page.  
(referred to as Printer Utility)  
Print an alignment page.  
Clean the printhead nozzles.  
Order ink or supplies.  
Register the printer.  
Contact technical support.  
Lexmark Wireless Setup Assistant  
Set up the printer on a wireless network.  
(referred to as Wireless Setup Assistant)  
Note: Your printer may not come with these applications, depending on the features of the printer that you  
purchased.  
Using the printer software  
22  
 
Printing  
Printing a document  
1 Load the paper in the printer.  
2 Send the print job:  
For Windows users  
a With a document open, click File Print.  
b Click Properties, Preferences, Options, or Setup.  
c Select the print quality, the number of copies to print, the type of paper to use, and how the pages should  
print.  
d Click OK to close any printer software dialogs.  
e Click OK or Print.  
For Macintosh users  
a With a document open, choose File > Print.  
b From the Printer pop-up menu, choose the printer.  
c If necessary, click the disclosure triangle.  
d From the print options pop-up menu, choose the print quality, the number of copies to print, the type of  
paper to use, and how the pages should print.  
e Click Print.  
Printing on both sides of the paper (duplexing)  
automatically  
The automatic duplex unit, available only on selected printer models, supports letter- and A4-size paper. If you  
purchased a model without automatic duplex, or if you need to print duplex using other paper sizes, then see the  
instructions for printing on both sides of the paper (duplexing) manually.  
For Windows users  
1 With a document open, click File Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 Click the Advanced tab.  
4 From the 2-Sided Printing section, select On from the drop-down menu.  
Note: To use the settings defined in the printer, select Use Printer Settings.  
5 Select either the Sideflip or Topflip option. Sideflip is the setting most often used.  
Printing  
23  
     
6 Select Extend Dry Time, and then select a setting. In regions with high humidity, select Extended.  
7 Click OK to close any printer software dialogs.  
8 Click OK or Print.  
Note: To return to single-sided printing, return to the Advanced tab. From the 2-Sided Printing section, select  
Off from the drop-down menu.  
For Macintosh users  
1 With a document open, choose File > Print.  
2 From the Printer pop-up menu, choose the printer.  
3 From the print options pop-up menu, choose Layout.  
4 From the Two-Sided menu, select Long-edge binding or Short-edge binding.  
For Long-edged binding, pages are bound along the long edge of the page (left edge for portrait, top edge  
for landscape).  
Note: Long-edged binding is not available in Mac OS X v10.3.  
Portrait  
Landscape  
For Short-edged binding, pages are bound along the short edge of the page (top edge for portrait, left edge  
for landscape).  
Portrait  
Landscape  
5 From theprintoptions pop-up menu,choose Print Settings or AdvancedOptions, dependingonyouroperating  
system.  
6 If necessary, click the disclosure triangle.  
7 Select Two-Sided Printing Dry Time. In regions with high humidity, select Extended.  
8 Click Print.  
Printing  
24  
Printing photos using the printer control panel  
1 Load photo paper.  
2 Insert a memory card, flash drive, or digital camera set to mass storage mode.  
The Memory Device screen appears on the display.  
3 Touch View Photos.  
The Select Photos screen appears.  
4 Touch the photo or photos you want to print.  
Tips:  
If you want to clear a selected photo, then touch the photo again.  
If you want to view more photos, then touch the left or right arrow, and then touch the photo to select it.  
5 When you are finished selecting the photos you want to print, touch Layout.  
6 If you want to change the print settings, then touch Change Settings.  
If necessary, touch Accept each time you make a selection.  
7 Press  
.
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.  
Canceling print jobs  
To cancel a print job from the printer control panel, press . To cancel a printjob fromthecomputer, do the following:  
For Windows users  
1 Click , or click Start and then click Run.  
2 In the Start Search or Run box, type control printers.  
3 Press Enter, or click OK.  
The printer folder opens.  
4 Right-click the printer, and then select Open.  
5 Cancel the print job:  
If you want to cancel a particular print job, then right-click the document name, and then select Cancel.  
If you want to cancel all print jobs in the queue, then click Printer Cancel All Documents.  
For Macintosh users  
1 Click the printer icon on the Dock.  
2 From the print queue dialog, choose the job you want to cancel, and then click Delete.  
Printing  
25  
   
Copying  
ADF  
Scanner glass  
Use the ADF for multiple-page documents.  
Note: The ADF is available only on selected  
models. If you purchased a printer without an  
ADF, then load original documents or photos on  
the scanner glass.  
Use the scanner glass for single pages, small items (such as postcards  
or photos), transparencies, photo paper, or thin media (such as  
magazine clippings).  
Tips for copying  
When using the ADF, adjust the paper guide on the ADF to the width of the original document.  
When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.  
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine  
clippings) into the ADF. Place these items on the scanner glass.  
Making copies  
1 Load paper.  
2 Load an original document faceup into the ADF or facedown on the scanner glass.  
Note: From the home screen, you can press to print one copy of the original document using the default  
settings.  
3 From the home screen, navigate to Number of Copies:  
Copy > Number of Copies  
4 Enter the number of copies you want to print, and then touch Accept.  
5 Touch Color or Black/White to set a color or black-and-white copy.  
6 Press  
.
Copying photos  
1 Load photo paper.  
2 Place a photo facedown on the scanner glass.  
Copying  
26  
       
3 From the home screen, navigate to Photo Reprint:  
SmartSolutions > Photo Reprint  
4 Touch Continue.  
5 Select the photo print size, and then touch Accept.  
6 Touch Continue to start printing.  
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.  
Making a duplex copy automatically  
The automatic duplex unit, available only on selected printer models, supports letter- and A4-size paper. If you  
purchased a model without automatic duplex, or if you need to make duplex copies using other paper sizes, then  
see the instructions for making a duplex copy manually.  
Note: You cannot make duplex copies on envelopes, card stock, or photo paper.  
1 Load paper.  
2 Load an original document faceup into the ADF or facedown on the scanner glass.  
3 From the home screen, navigate to 2-Sided Copies:  
Copy > More Options > 2-Sided Copies  
4 Choose the duplex option that matches your original document, and then touch Accept:  
If you are copying a one-sided document, then touch 1-Sided to 2-Sided.  
If you are copying a two-sided document, then touch 2-Sided to 2-Sided.  
5 Press to save the first page of the document to the printer memory.  
6 Follow the instructions on the display.  
Canceling copy jobs  
To cancel a copy job, press  
.
Scanning stops and the printer returns to the previous menu.  
Copying  
27  
   
Scanning  
ADF  
Scanner glass  
Use the ADF for multiple-page documents.  
Note: The ADF is available only on selected  
models. If you purchased a printer without an  
ADF, then load original documents or photos on  
the scanner glass.  
Use the scanner glass for single pages, small items (such as postcards  
or photos), transparencies, photo paper, or thin media (such as  
magazine clippings).  
Tips for scanning  
When using the ADF, adjust the ADF paper guide to the width of the original document.  
When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.  
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine  
clippings) into the ADF. Place these items on the scanner glass.  
Select the PDF file type if you want to scan multiple pages and save them as one file.  
Scanning to a local or network computer  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
2 From the home screen, navigate to Scan to Computer:  
Scan > Scan to Computer  
3 Touch USB-Connected Computer or the name of a network computer.  
The local or network computer is the destination that will receive the scan. Wait until the printer has finished  
downloading a list of the scan applications available on the selected computer.  
Notes:  
If the printer is connected only to a local computer, then the printer will automatically download a list of the  
scan applications.  
You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.  
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with  
your operating system.  
4 Select an application, and then touch Accept.  
Scanning  
28  
     
5 Select the color, resolution quality and the original image size. If necessary, touch Accept each time you make a  
selection.  
6 Press to start scanning.  
The scan is complete when the application you selected in step 4 opens on the destination computer, and the scan  
appears within the application as a new file.  
Scanning to a flash drive or memory card  
Before you begin, make sure your flash drive or memory card is not write protected.  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
2 From the home screen, navigate to Scan to Memory Device:  
Scan > Scan to Memory Device  
3 Insert the flash drive or memory card.  
Notes:  
The printer reads only one memory device at a time.  
If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears  
on the display prompting you to select which memory device to use.  
4 Select the output file type you want to create.  
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.  
5 Select the color, resolution quality, and original image size. If necessary, touch Accept each time you make a  
selection.  
6 Press to start scanning.  
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has  
been saved.  
Scanning directly to e-mail using the printer  
software  
For Windows users  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
2 Click or Start.  
3 Click All Programs or Programs, and then select the printer program folder from the list.  
4 Select Printer Home.  
5 Choose your printer from the printer drop-down list.  
Scanning  
29  
   
6 Click Email, and then select Photo, Document or PDF.  
Note: You can select Document only if an OCR application is stored on your computer.  
Scanning starts and the scan progress dialog appears.  
7 When the scan is finished, a new e-mail message is created with the scanned document automatically attached.  
8 Compose your e-mail message.  
Note: If your e-mail program does not open automatically, then you can scan the document to the computer and  
then send it through e-mail as an attachment.  
For Macintosh users  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
2 From the Finder desktop, double-click the printer program folder.  
3 Double-click the printer Center to open the All-In-One Center.  
4 From the “What is being scanned?” menu on the main screen, select a document type.  
5 From the “How will the scanned image be used?” menu, choose To be viewed on monitor/web page.  
6 From the “Send scanned image to” menu, choose an application.  
7 Click Scan.  
8 Retrieve the scanned image from the application, and then send it through e-mail as an attachment.  
Scanning to a PDF  
For Windows users  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
2 Click or Start.  
3 Click All Programs or Programs, and then select the printer program folder from the list.  
4 Select Printer Home.  
5 Choose your printer from the printer drop-down list.  
6 Click PDF.  
Scanning starts and the scan progress dialog appears.  
7 Save the document as a PDF.  
For Macintosh users  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
2 From the Finder desktop, double-click the printer program folder.  
3 Double-click the printer Center to open the All-In-One Center.  
4 From the “What is being scanned?” menu on the main screen, choose a document type.  
Scanning  
30  
 
5 Customize the settings as needed.  
6 Click Scan.  
7 Save the document as a PDF.  
Canceling scan jobs  
Press on the printer control panel, or click Cancel on the computer screen.  
Scanning  
31  
 
E-mailing  
Sending e-mail  
Tips for e-mailing  
When using the ADF, adjust the paper guide on the ADF to the width of the original document.  
When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.  
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine  
clippings) into the ADF. Place these items on the scanner glass.  
Make sure to enter your e-mail account information and set up the SMTP server before sending an e-mail.  
Make sure the printer is connected to an Ethernet or wireless network before sending an e-mail.  
If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP  
server. If the printer cannot connect to the Internet, then contact your system support person.  
The printer supports only one active network connection (Ethernet or wireless) at a time.  
Add contacts to your address book. When sending an e-mail, you can just select contacts from your address book  
instead of typing their e-mail addresses repeatedly.  
Scanning a document or photo to e-mail  
1 Load an original document faceup into the ADF or facedown on the scanner glass.  
Note: You can attach only one document or photo to each e-mail.  
2 From the home screen, navigate to Scan to E-mail:  
Scan > Scan to E-mail  
3 Select the output file type you want to create.  
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.  
4 Touch an option to enter or select the recipients:  
Enter E-mail Address—enter the e-mail address manually.  
Address Book—touch Sort by Name or Sort by Group, and then select the contact.  
History—select the name or e-mail address from the history list.  
If necessary, touch OK or Accept each time you make a selection.  
5 To enter additional recipients, touch Add Recipient, and then enter the e-mail address, name, or group you want  
to add.  
Touch Accept every time you add a recipient.  
Note: You can send an e-mail to up to 30 recipients.  
6 Select the file type, color, quality, and original size of the document or photo you want to send. If necessary, touch  
Accept to save each setting.  
E-mailing  
32  
   
7 If you want to change the default e-mail subject:  
a Touch Subject.  
b Enter your subject, and then touch OK.  
8 If you want to change the default e-mail message:  
a Touch Message.  
b Enter your message, and then touch OK.  
9 Press  
.
Attaching a document or photo to e-mail  
1 Insert the flash drive or memory card.  
The Memory Device screen appears on the display.  
Notes:  
The printer reads only one memory device at a time.  
If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears  
on the display prompting you to select which memory device to use.  
2 Touch Attach File to E-mail.  
3 If you want to change the default e-mail subject:  
a Touch Subject.  
b Enter your subject, and then touch OK.  
4 If you want to change the default e-mail message:  
a Touch Message.  
b Enter your message, and then touch OK.  
5 Select the file to attach:  
Note: You can attach only one document or photo to each e-mail.  
If you want to attach a document:  
a Touch Attach document to E-mail.  
b Touch the file name of the document that you want to attach.  
c Touch Continue.  
If you want to attach a photo:  
a Touch Attach Photo to E-mail.  
b Touch the photo you want to attach.  
c Touch Continue.  
6 Touch an option to enter or select the recipients:  
Enter E-mail Address—enter the e-mail address manually.  
Address Book—touch Sort by Name or Sort by Group, and then select the contact.  
History—select the name or e-mail address from the history list.  
If necessary, touch OK or Accept each time you make a selection.  
E-mailing  
33  
7 To enter additional recipients, touch Add Recipient, and then enter the e-mail address, name, or group you want  
to add.  
Touch Accept every time you add a recipient.  
Note: You can send an e-mail to up to 30 recipients.  
8 Touch Send.  
Canceling an e-mail  
To cancel an e-mail, press  
.
E-mailing  
34  
 
Using SmartSolutions  
What is SmartSolutions?  
SmartSolutions is a suite of solutions that you can create, customize, and download from the Web site  
(smartsolutions.lexmark.com) to your printer.  
Using the SmartSolutions Web site, you can create solutions by choosing printer functions, applying settings for  
those functions, and then downloading them to your printer for later use. You can create multiple solutions for the  
tasks you frequently repeat and wish to simplify.  
You can also customize and download solutions that allow you to view Internet-based information on the touch  
screen.  
To access a solution you created or customized, touch SmartSolutions from the printer control panel, and then  
select the icon/name of the solution.  
The following are some of the solutions that may be available; be sure to check the SmartSolutions Web site for an  
updated list.  
Pre-loaded solutions  
Use  
To  
ID Card Copy  
Photo Reprint  
Tell Me More  
Copy both sides of an ID card onto a single page.  
Create photo reprints.  
Learn more about SmartSolutions and how you can create and download your  
custom solutions.  
Custom solutions  
Solution  
Description  
Copy  
Copy documents or photos using pre-defined copy settings.  
Scan to E-mail  
E-mail scanned documents directly from the printer using pre-defined names or  
contacts from the address book.  
Scan to Fax  
Fax documents to recipients previously selected in the SmartSolutions Web site  
using pre-defined settings.  
Scan to File (Windows and Macintosh Scan and save files to a previously selected computer using pre-defined settings.  
only)  
Print a File (Windows only)  
Eco-Copy  
Using the printer, select document files from your computer and print them.  
Copy documents or photos using settings that have positive environmental  
impact.  
RSS Feed*  
View news headlines with options to e-mail the complete articles or launch them  
for viewing on a Windows computer.  
Web Calendar*  
View your own Web-based calendar with an option to print the daily agenda.  
* You can select one or more of these solutions as your printer screen saver.  
Using SmartSolutions  
35  
   
Solution  
Description  
Photo Viewer*  
View photos from Web sites with options to print or send an e-mail with a link to  
the selected photos.  
Cartridge Finder*  
View information on local stores where you can purchase cartridges with an  
option to print or e-mail cartridge information.  
* You can select one or more of these solutions as your printer screen saver.  
Examples:  
If you are a business owner or supervisor who frequently prints a work schedule, then you could create a Print a  
File solution. Specify the location of your schedule file, and then name the solution Print Schedule. The next time  
you need to print a copy of the current schedule, simply select Print Schedule from the SmartSolutions menu on  
the printer control panel. The printer automatically finds the file and prints it.  
If you frequently scan and fax a document to your lawyer using the same settings, then you could create a Scan  
to Fax solution and name it Fax To Lawyer. The next time you want to fax a document, you simply have to load  
the document and select Fax To Lawyer from the SmartSolutions menu on the printer control panel. The printer  
automatically applies your chosen settings, selects your lawyer as the fax recipient, and then sends the fax.  
Note: You need to add your printer on the SmartSolutions Web site before you can start creating or customizing  
solutions.  
Creating or customizing printer solutions  
Before you begin, make sure:  
Your printer and computer are each connected to the Internet through an Ethernet or wireless connection.  
Your printer is powered on.  
Your printer and computer are on the same network.  
Using the printer control panel (Windows only)  
1 Go to the SmartSolutions Web site, and then add your printer:  
a From the home screen of your printer control panel, navigate to Launch SmartSolutions on my  
computer  
SmartSolutions > More Options > Launch SmartSolutions on my computer  
b Select the computer where you want to launch SmartSolutions.  
Note: The printer software must be installed on the computer before you can select it.  
c From the SmartSolutions Web site, log in or create an account.  
d Add your printer.  
Note: You only need to add your printer once. The next time you want to create or customize solutions you  
do not need to add it again.  
2 Use the Web site to create, customize, and download solutions to your printer.  
Using the printer software  
1 Open the printer program folder and select your printer:  
Using SmartSolutions  
36  
 
For Windows users  
a Click or Start.  
b Click All Programs or Programs, and then select the printer program folder from the list.  
c Select your printer.  
For Macintosh users  
From the Finder desktop, double-click the printer program folder.  
2 Select the SmartSolutions link.  
3 From the SmartSolutions Web site, log in or create an account.  
4 Add your printer.  
Note: You only need to add your printer once. The next time you want to create or customize printer solutions  
you do not need to add it again.  
5 Use the Web site to create, customize, and download solutions to your printer.  
Using SmartSolutions  
37  
Troubleshooting  
Before you troubleshoot  
Use this checklist to solve most printer problems:  
Make sure the power cord is plugged into the printer and into a properly grounded electrical outlet.  
Make sure the printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.  
Make sure the printer is turned on.  
Make sure the printer is securely connected to the host computer, print server, or other network access point.  
Check the printer for error messages, and resolve any errors.  
Check for paper jam messages, and clear any jams.  
Check the ink cartridges, and install new cartridges if necessary.  
Use the Service Center to locate and solve the problem (Windows only).  
Turn the printer off, wait about 10 seconds, and then turn the printer back on.  
Using the Service Center to solve printer problems  
The Service Center provides step-by-step troubleshooting help and contains links to printer maintenance tasks and  
customer support.  
To open the Service Center, use one of these methods:  
Method 1  
Method 2  
If it appears on an error message dialog, click the For  
additional assistance, use the Service Center link.  
1 Click or Start.  
2 Click All Programs or Programs, and then select the  
printer program folder from the list.  
3 Select Printer Home.  
4 From the Support tab, select Service Center.  
If Troubleshooting does not solve your problem  
Visit our Web site at support.lexmark.com to find the following:  
Knowledgebase articles with the latest information and troubleshooting for your printer  
Live online technical support  
Contact numbers for telephone technical support  
Setup troubleshooting  
Troubleshooting  
38  
 
Incorrect language appears on the display  
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:  
CHANGE THE LANGUAGE USING THE PRINTER MENUS  
1 From the home screen, navigate to Use Factory Defaults:  
> Use Factory Defaults  
2 Touch Yes.  
The printer resets and starts the initial printer setup.  
3 Complete the initial printer setup.  
Printhead errors  
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:  
REMOVE AND REINSERT THE PRINTHEAD  
1 Open the printer and lift the latch.  
2 Remove the printhead.  
Warning—Potential Damage: Do not touch the printhead nozzles.  
Troubleshooting  
39  
   
3 Wipe the printhead contacts using a clean, lint-free cloth.  
4 Reinsert the printhead, and then close the latch until it clicks.  
5 Close the printer.  
Note: If removing and reinserting the printhead does not resolve the error, then contact technical support.  
Software did not install  
If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as  
a printer option when sending a print job, then try removing and reinstalling the software.  
Before you reinstall the software, do the following:  
MAKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON  
THE PRINTER BOX  
TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE  
CHECK THE USB CONNECTION  
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.  
2 Firmly plug the square end of the USB cable into the back of the printer.  
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with a  
USB symbol.  
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to  
a defective port.  
Troubleshooting  
40  
 
RECONNECT THE PRINTER POWER SUPPLY  
1 Turn off the printer, and then unplug the power cord from the wall outlet.  
2 Gently remove the power supply from the printer, and then reinsert it.  
3 Plug the power cord into the wall outlet, and then turn on the printer.  
Print job does not print or is missing pages  
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:  
MAKE SURE THE INK CARTRIDGES ARE INSERTED CORRECTLY  
1 Turn the printer on, and then open the printer.  
2 Make sure the cartridges are inserted correctly.  
The cartridges should click firmly into the matching color slot of the printhead.  
3 Close the printer.  
SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOB  
MAKE SURE THE PRINT JOB IS NOT PAUSED  
MAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER  
RECONNECT THE PRINTER POWER SUPPLY  
1 Turn off the printer, and then unplug the power cord from the wall outlet.  
2 Gently remove the power supply from the printer, and then reinsert it.  
3 Plug the power cord into the wall outlet, and then turn on the printer.  
REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER  
CHECK THE USB CONNECTION  
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.  
2 Firmly plug the square end of the USB cable into the back of the printer.  
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with a  
USB symbol.  
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to  
a defective port.  
REMOVE AND REINSTALL THE PRINTER SOFTWARE  
Troubleshooting  
41  
 
Printer is printing blank pages  
Blank pages may be caused by improperly installed ink cartridges.  
REINSTALL THE INK CARTRIDGES AND DEEP CLEAN AND ALIGN THE PRINTHEAD  
1 Reinstall the ink cartridges, see “Replacing ink cartridges” on page 15 for more information.  
If the cartridges do not seem to fit, make sure the printhead is properly seated, and then try installing the  
cartridges again.  
2 Load plain paper.  
3 From the home screen of the printer control panel, navigate to Deep Clean Printhead:  
> More Options > Deep Clean Printhead  
A cleaning page prints.  
4 Navigate to Align Printer:  
> More Options > Align Printer.  
An alignment page prints.  
Note: Do not remove the alignment page until printing is finished.  
Printer is busy or does not respond  
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:  
MAKE SURE THE PRINTER IS NOT IN POWER SAVER MODE  
If the power light is blinking on and off slowly, then the printer is in Power Saver mode. Press to wake up the  
printer.  
If the printer will not come out of Power Saver mode, then reset the power:  
1 Unplug the power cord from the wall outlet, and then wait 10 seconds.  
2 Insert the power cord into the wall outlet, and then turn on the printer.  
If this problem persists, then check our Web site for updates for your printer software or firmware.  
RECONNECT THE PRINTER POWER SUPPLY  
1 Turn off the printer, and then unplug the power cord from the wall outlet.  
2 Gently remove the power supply from the printer, and then reinsert it.  
3 Plug the power cord into the wall outlet, and then turn on the printer.  
Cannot delete documents from the print queue  
If you have jobs stuck in the print queue and cannot delete them to get other jobs to print, then the computer and  
printer may not be communicating.  
RESTART THE COMPUTER AND TRY AGAIN  
Troubleshooting  
42  
     
Cannot print through USB  
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:  
CHECK THE USB CONNECTION  
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.  
2 Firmly plug the square end of the USB cable into the back of the printer.  
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with a  
USB symbol.  
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to  
a defective port.  
MAKE SURE THE USB PORT IS ENABLED IN WINDOWS  
1 Click , or click Start and then click Run.  
2 In the Start Search or Run box, type devmgmt.msc.  
3 Press Enter, or click OK.  
The Device Manager opens.  
4 Click the plus sign (+) beside Universal Serial Bus controllers.  
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.  
For more information, see the computer documentation.  
REMOVE AND REINSTALL THE PRINTER SOFTWARE  
Network Troubleshooting  
If you are having trouble setting up your printer on a network, print a network setup page, and then see the complete  
network troubleshooting information in the Network Getting Started Guide or the comprehensive User's Guide  
available on the installation software CD.  
Printing a network setup page  
A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the  
printer.  
1 Load plain paper.  
2 From the home screen, navigate to Print Setup Page:  
> Network Setup > Print Setup Page  
The network setup page prints.  
Troubleshooting  
43  
 
Notices  
Edition notice  
May 2009  
The following paragraph does not apply to any country where such provisions are inconsistent with local  
law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in  
certain transactions; therefore, this statement may not apply to you.  
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the  
information herein; these changes will be incorporated in later editions. Improvements or changes in the products  
or the programs described may be made at any time.  
References in this publication to products, programs, or services do not imply that the manufacturer intends to make  
these available in all countries in which it operates. Any reference to a product, program, or service is not intended  
to state or imply that only that product, program, or service may be used. Any functionally equivalent product,  
program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation  
and verification of operation in conjunction with other products, programs, or services, except those expressly  
designated by the manufacturer, are the user’s responsibility.  
For Lexmark technical support, visit support.lexmark.com.  
For information on supplies and downloads, visit www.lexmark.com.  
If you don't have access to the Internet, you can contact Lexmark by mail:  
Lexmark International, Inc.  
Bldg 004-2/CSC  
740 New Circle Road NW  
Lexington, KY 40550  
USA  
© 2009 Lexmark International, Inc.  
All rights reserved.  
UNITED STATES GOVERNMENT RIGHTS  
This software and any accompanying documentation provided under this agreement are commercial computer  
software and documentation developed exclusively at private expense.  
Trademarks  
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United  
States and/or other countries.  
All other trademarks are the property of their respective owners.  
Notices  
44  
   
Federal Communications Commission (FCC) compliance  
information statement  
This product complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
1 this device may not cause harmful interference, and  
2 this device must accept any interference received, including interference that may cause undesired operation.  
Any questions on this statement should be directed to:  
Director of Lexmark Technology & Services  
Lexmark International, Inc.  
740 West New Circle Road  
Lexington, KY 40550  
(859) 232-3000  
For additional compliance information, see the online documentation.  
Federal Communications Commission (FCC) compliance  
information statement  
Thisproduct complieswithPart 68 of the FCC Rules. See the product online documentationfor additional compliance  
information.  
Notices  
45  

Lindy 38022 User Manual
Panasonic Cu Ce12gke User Manual
Panasonic Cu E24fkr User Manual
Panasonic Cw Xc185hu User Manual
Redmax Revolution 510 Bf User Manual
Ricoh 350e User Manual
Samsung Uq12a2md User Manual
Sanyo Kms0972 User Manual
Soleus Air Ky 34 User Manual
Vortech Engineering Automobile Parts 4fc020 010 User Manual