Zhone Technologies Network Card IPD 12000E User Manual

IPD 12000E Broadband Loop Carrier (BLC)  
IPD12000E  
Video Ready, High-capacity Ethernet-based Modular Multi-Service  
Broadband Loop Carrier for large scale Central Office DSL  
deployments  
DSL the Easy Way™  
provides true 'Plug &  
Play', loop-bonded  
operation with no  
configuration required  
High density system with  
12 line card slots (up to  
576 lines / chassis or 1,152  
lines per 7' rack)  
Zhone's IPD12000E Broadband Loop Carrier (BLC) provides a high capacity, native IP Ethernet  
platform for the feature rich multi-service access multiplexer modules in the IPD family.  
High bandwidth, full  
duplex 16-GigE uplink and  
24-GigE backplane  
capacities  
The IPD12000E is engineered for efficient, high-speed IP data transport in a compact, fault-tolerant  
chassis. Supporting high-density Active Ethernet, ADSL2+, SHDSL, extended-rate SHDSL.bis, and  
T1/E1 access modules, the Ethernet-based IPD12000E is the optimal line aggregation platform for  
today's advanced IP-based access networks. Incumbents, Competitive Operators, and Internet Service  
Providers are able to cost-effectively offer the full range of today's advanced IP-based services, such as  
high-speed broadband Internet and IP video. Most importantly, these services can be delivered over a  
pure IP network without a dependency on ATM.  
Choice of T1, E1, ADSL2+,  
SHDSL/SHDSL.bis, and  
Active Ethernet,  
The IPD12000E features a high capacity backplane, delivering up to 2 Gbps throughput to each of the  
12 access slots, and up to 16 Gbps upstream from a pair of Broadband Services Switch 8000 uplink  
cards. Dual 50-pin, RJ-21 connectors are provided for every slot so that the chassis can support higher  
port density modules in any access slot. High port density modules include a 48-port ADSL2+, a  
48-port SHDSL.bis, and 24-port, 4-wire T1 and E1 modules. For mission-critical, high speed data  
applications, the IPD12000E offers survivable network topologies by means of Ethernet Automatic  
Protection Switching (EAPS) rings and BSX8000 uplink card-level redundancy options.  
hot-swappable, access  
modules  
Supports T1/E1 and  
SHDSL/SHDSL.bis loop  
bonding for high-capacity,  
symmetric business-class  
services  
Managing all of these high-speed services could not be simpler with the availability of a full range of  
local and remote management options, including an integrated Web GUI, SNMP, and Command Line  
Interface (CLI). All of the Access Modules offer simple, 'Plug & Play' operation, with the system  
configuring each port automatically and without intervention. When more sophisticated bandwidth  
management functionality is desired, the IPD supports Zhone's complete Multi-media Traffic  
Management (MTM) feature set, giving system operators the ability to prioritize traffic based on DSCP,  
IP address ranges, MAC address ranges, and VLAN ranges. Rate limiting features and 802.1p priority  
also ensure that specific applications are given appropriate priority and bandwidth allocation  
throughout the system, while marking packets for appropriate VLAN and QoS management by  
upstream network devices.  
Survivable network  
topology options based  
on RFC3619 EAPS rings  
and uplink card  
redundancy  
The IPD12000E supports up to two BSX8000-5 (Broadband Switch Modules ) uplink cards, each  
operating in simplex mode or a pair of BSX8000-5R cards operating in redundant mode. Each BSX8000  
switch card supports four (4) Gigabit uplink ports, and has provisions for an optional MIM (Micro  
Interface Module), allowing the IPD to integrate easily into a variety of network designs. A variety of  
MIM types are available, including: 10/100 Ethernet; 100 Mbps fiber; 2 x T1/E1; 4 x T1/E1; and either  
2- or 4- Gigabit Ethernet ports using either copper or fiber Small Form Factor Pluggable modules.  
Metro Ethernet Forum  
(MEF 9/14) Certified for  
EVPL and E-LAN Services  
For installation flexibility, the IPD12000E is only 9-rack units high, and has removable mounting  
brackets that can be placed in increments of 1.45” up to 9.28” from the front of the chassis, allowing  
for multiple installation options in either 19" or 23" equipment racks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weil McLain Boiler GV Series 3 User Manual
Whirlpool Clothes Dryer 3RLEC8600 User Manual
Whirlpool Cooktop GJ8640XB User Manual
Whirlpool Cooktop SF272LXTD1 User Manual
Whirlpool Refrigerator 3ET22DK User Manual
White Rodgers Burner 668 430 User Manual
Xantrex Technology Power Supply XDC 100 120 User Manual
Xerox Printer XD125F User Manual
Yamaha Stereo Amplifier DSP AX863SE User Manual
Zenith Flat Panel Television Z42PX21D User Manual