Zenith Satellite TV System 3235DT User Manual
machine numbers  
H2735DT  
H3235DT  
H3635DT  
ConciergeTM  
Direct-View  
Television  
Receiver  
i n s t a l l a t i o n  
&
o p e r a t i n g g u i d e / w a r r a n t y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Important safeguards for you and your new product  
Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential  
electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read  
and observe the following safety points when installing and using your new product, and save them for future reference.  
Observing the simple precautions discussed in this booklet can help you get many years of enjoyment and safe operation  
that are built into your new product.  
This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards Association.  
1. Read Instructions  
9. Attachments  
All the safety and operating instructions should be read  
before the product is operated.  
Do not use attachments not recommended by the product  
manufacturer as they may cause hazards.  
2. Follow Instructions  
All operating and use instructions should be followed.  
10. Ventilation  
Slots and openings in the cabinet are provided for ventila-  
tion and to ensure reliable operation of the product and to  
protect it from overheating, and these openings must not  
be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug, or  
other similar surface. This product should not be placed in  
a built-in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s instruc-  
tions have been adhered to.  
3. Retain Instructions  
The safety and operating instructions should be retained for  
future reference.  
4. Heed Warnings  
All warnings on the product and in the operating instruc-  
tions should be adhered to.  
5. Cleaning  
11. Power Sources  
Unplug this product from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp  
cloth for cleaning.  
This product should be operated only from the type of  
power source indicated on the marking label. If you are not  
sure of the type of power supply to your home, consult  
your product dealer or local power company. For products  
intended to operate from battery power, or other sources,  
refer to the operating instructions.  
6. Water and Moisture  
Do not use this product near water for example, near a  
bath tub, wash bowl, kitchen sink, or laundry tub, in a wet  
basement, or near a swimming pool.  
12. Line-Cord Polarization  
7. Accessories  
This product is equipped with a polarized alternating-cur-  
rent line plug (a plug having one blade wider than the  
other). This plug will fit into the power outlet only one  
way. This is a safety feature. If you are unable to insert the  
plug fully into the outlet, try reversing the plug. If the  
plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the safety pur-  
pose of the polarized plug.  
Do not place this product on an unstable cart, stand, tri-  
pod, bracket, or table. The product may fall, causing serious  
injury to a child or adult, and serious damage to the prod-  
uct. Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the prod-  
uct. Any mounting of the product should follow the manu-  
facturer’s instructions, and should use a mounting accesso-  
ry recommended by the manufacturer.  
13. Power-Cord Protection  
8. Transporting Product  
Power-supply cords should be routed so that they are not  
likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to cords at plugs,  
convenience receptacles, and the point where they exit  
from the product.  
A product and cart combination should be moved with care.  
Quick stops, excessive force, and uneven surfaces may  
cause the product and cart combination to overturn.  
(Continued on next page)  
P AGE 3  
206-3489-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
(Continued from previous page)  
18. Object and Liquid Entry  
14. Outdoor Antenna Grounding  
Never push objects of any kind into this product through  
openings as they may touch dangerous voltage points or  
short-out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
If an outside antenna or cable system is connected to the  
product, be sure the antenna or cable system is grounded so  
as to provide some protection against voltage surges and  
built-up static charges. Article 810 of the National Electrical  
Code (U.S.A.), ANSI/ NFPA 70 provides information with  
regard to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna dis-  
charge unit, size of grounding conductors, location of  
antenna-discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
19. Servicing  
Do not attempt to service this product yourself as opening  
or removing covers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified service person-  
nel.  
20. Damage Requiring Service  
Unplug this product from the wall outlet and refer servicing  
to qualified service personnel under the following condi-  
tions:  
Example of Grounding According to National Electrical  
Code Instructions  
a. If the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
product.  
Ground Clamp  
Antenna Lead in Wire  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following  
the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the product to its normal operation.  
Antenna Discharge Unit  
(NEC Section 810-20)  
Grounding Conductor  
(NEC Section 810-21)  
Electric Service  
Equipment  
Ground Clamps  
Power Service Grounding  
Electrode System (NEC  
Art 250, Part H)  
e. If the product has been dropped or the cabinet has been  
damaged.  
NEC - National Electrical Code  
f. If the product exhibits a distinct change in performance.  
15. Lightning  
21. Replacement Parts  
For added protection for this product (receiver) during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line  
surges.  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the man-  
ufacturer or have the same characteristics as the original  
part. Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
22. Safety Check  
16. Power Lines  
Upon completion of any service or repairs to this product,  
ask the service technician to perform safety checks to deter-  
mine that the product is in proper operating condition.  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be fatal.  
23. Wall or Ceiling Mounting  
The product should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
17. Overloading  
24. Heat  
Do not overload wall outlets and extension cords as this can  
result in a risk of fire or electric shock.  
The product should be situated away from heat sources such  
as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
206-3489-O  
P AGE 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Turn to the next page to begin the TV setup  
Safety Warnings  
Important Safety Information  
Table of Contents  
2
3
5
Captions Caption/ Text  
Language  
21  
22  
Audio Menu  
23  
24  
25  
Step 1. Hook Up TV  
Hookup Directory  
TV and other Equipment Hookups  
Antenna  
Bass, Treble, Balance, Audio Mode,  
Front Surround, Sound Rite, Speakers  
Video Menu  
Contrast, Brightness, Color, Tint, Sharpness,  
Picture Pref.  
Installer Parental Control Menu  
Setup Parental Control  
Other Menus and On-Screen Displays  
Managing the Channel Banks  
Installer Menus  
6
7
8
9
10  
11  
Cable service  
Antenna with VCR  
Cable service with VCR  
External Speaker  
27  
28  
31  
34  
Step 2. Channel Search and Reception Setup  
Auto Program  
(Select Antenna, or cable service and perform  
channel search)  
Front Panel Controls  
Guest’s Remote Key Functions  
Installer’s Remote Key Functions  
On-Screen Menus Overview  
Step 3. Customize the TV’s Features  
Setup Menu (Start with page 12, Auto Program)  
Add/ Del/ Blank  
12  
LT1500 Quickset Clone Programmer  
13  
14  
15  
16  
Maintenance  
Trouble Shooting  
Glossary  
37  
38  
39  
Guest Operation Section (Copy for guest usage)  
Guest Remote Control Key Functions  
Guest Parental Control Menu  
40  
41  
43  
17  
18  
19  
20  
Channel Labels  
Timer Setup  
Clock Set  
Guest Menus and On-Screen Displays  
Warranty for ConciergeTM Series TVs  
Back Cover  
Installer/ Hotel Note:  
Pages 40, 41, 42, and 43 contain information and menus which the guest can use to operate the TV.  
It is recommended that these four pages be copied and included with the literature packet that the  
hotel provides to the guest.  
Purchase the Optional Installer’s Remote and Clone Programmer  
To preform the installation setup, you need an installer’s remote like the LP702, and the LT1500 Clone Programmer - -  
both are shown and described in later sections. The installer remote allows access to the Installer menus, User menus,  
and Source/ Channel Banks. The installer remote has Menu, Select, and Adjust Keys (Up/ Down/ Left/ Right arrows) and  
Source/ Channel Bank Keys. The LT1500 Clone Programmer is used to duplicate a TV’s setup and install it on another TV.  
See your Zenith Dealer.  
Design and specifications are subject to change without prior notice.  
206-3489-O  
P AGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Hook-Up Directory  
This page will direct you to which page to go to for proper hook up of the TV  
IMPORTANT!!  
Use this page to decide where you need to begin your set up. First, find the line below that best describes what  
you want to do, then go to that page number.  
If you are using an antenna and no other equipment, go to . . . . . . . . . . . . . . . . . . page 7  
Antenna only  
If you have cable and no other equipment, go to . . . . . . . . . . . . . . . . . . . . . . . . . page 8  
Cable only  
Cable TV  
wall jack  
Cable box  
In  
Out  
Antenna with VCR  
If you are using an antenna and have a VCR, go to . . . . . . . . . . . . . . . . . . . . . . . page 9  
Cable and VCR  
If you have cable and a VCR, go to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10  
Cable TV  
wall jack  
Cable box  
In  
Out  
External Speaker  
If you want to connect a Matrix speaker, go to . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11  
P AGE 6  
206-3489-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hook Up Your Antenna to the TV  
Connect an off-air antenna to the TV  
1
Locate the Antenna/ Cable jack on the back of the TV.  
Connect the cable that runs from the wall directly to  
this jack, according to the diagram to the right.  
2
TV back  
Antenna  
Remove the back of the remote and put in two AA bat-  
teries.  
3
back of  
remote  
Flat wire  
(300 ohm)  
ANTENNA  
CABLE  
MATRIX  
OUT  
VIDEO  
IN  
Plug in the TV. Do not plug it into a switched outlet.  
4
M.P.I.  
The TV is designed to operate on standard current, 120-  
volt 60 Hertz AC. Do not attempt to operate it on DC  
Current.  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
300/ 75 ohm  
Adapter  
120 V AC  
60 Hz  
Go to page 12 to Auto Program the TV.  
5
TV back  
Antenna  
RF coaxial wire  
(75ohm)  
ANTENNA  
CABLE  
If you have a 75 ohm RF cable, then you don’t need  
any adapters!  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
A 300 to 75 ohm adapter is not included with the  
Zenith TV.  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
Mini glossary  
75 OHM RF CABLE  
The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire  
sticking through the middle, and it screws onto the threaded jack on the back of your TV.  
A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack. They are usually about an inch long with two screws  
on one end and a round opening with a wire sticking out on the other end.  
300 TO 75 OHM  
ADAPTER  
206-3489-O  
P AGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hook Up Your Cable (CATV) to the TV  
Connect cable service to the TV  
Locate the Antenna/ Cable jack on the back of  
the TV.  
1
TV back  
Cable TV  
wall jack  
Connect the cable that runs from the wall  
directly to this jack, according to the diagram  
to the right.  
2
Remove the back of the remote and put in two  
AA batteries.  
3
ANTENNA  
CABLE  
RF coaxial wire (75ohm)  
back of  
remote  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
R- AUDIO-  
IN  
L
Plug in the TV. Do not plug it into a switched  
4
outlet. The TV is designed to operate on  
household current, 120-volt 60 Hertz AC. Do  
not attempt to operate it on DC Current.  
120 V AC  
60 Hz  
Cable TV  
wall jack  
Go to page 12 to Auto Program the TV.  
5
TV back  
If you’re using a cable box, leave the TV on  
channel 3 or 4 and use your cable box to  
change channels.  
Cable box  
In  
output  
switch  
Out  
3
4
If you’re using a cable box, Auto Program might  
only find the channel your cable service is on  
(usually channel 3 or 4). Don’t worry, that’s all  
you need!  
ANTENNA  
CABLE  
RF coaxial wire (75ohm)  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
R- AUDIO-  
IN  
L
P AGE 8  
206-3489-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hook Up Antenna and VCR to the TV  
Antenna  
VCR back  
Connect an off-air antenna and VCR to the TV  
Flat wire  
(300 ohm)  
VCR back AV panel  
output  
In  
300/ 75 ohm  
Adapter  
switch  
3
4
TV back  
Out  
Audio  
Video  
Locate the Antenna/ Cable jack on the back of the VCR.  
1
Connect the cable that runs from the antenna directly to  
2
this jack, according to the diagram to the right. As  
required, make the other connections as shown to the  
right.  
ANTENNA  
CABLE  
MATRIX  
OUT  
VIDEO  
IN  
Remove the back of the remote, put in two AA batteries.  
3
M.P.I.  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
back of  
remote  
A/ V cables  
not included  
with TV  
Plug in the TV. Do not plug it into a switched outlet. The  
TV is designed to operate on standard current, 120-volt  
60 Hertz AC. Do not attempt to operate it on DC Current.  
4
Antenna  
120 V AC  
60 Hz  
VCR back  
5
Go to page 12 to Auto Program the TV.  
RF coaxial wire  
(75ohm)  
VCR back AV panel  
output  
In  
switch  
3
4
Out  
Audio  
Video  
TV back  
RF coaxial wire  
(75ohm)  
not included  
with TV  
No A/ V cables are included with the Zenith TV.  
Without A/ V cables, most VCRs will not play videocas-  
settes in stereo sound.  
ANTENNA  
CABLE  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
A/ V cables  
not included  
with TV  
206-3489-O  
P AGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hook Up Cable Service (CATV) and VCR  
Cable TV  
wall jack  
VCR back  
Connect a VCR and Cable service to the TV.  
VCR back AV panel  
Round wire (75ohm)  
output  
In  
switch  
3
4
Out  
Audio  
Video  
TV back  
Locate the Antenna/ Cable jack on the back of the  
VCR.  
1
Connect the cable that runs from the wall directly  
2
to this jack, according to the diagram to the  
right. As required, make the other connections as  
shown to the right.  
ANTENNA  
CABLE  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
Remove the back of the remote, put in two AA  
3
batteries.  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
A/ V cables  
not included  
with TV  
back of  
remote  
Plug in the TV. Do not plug it into a switched  
4
outlet. The TV is designed to operate on standard  
current, 120-volt 60 Hertz AC. Do not attempt to  
operate it on DC Current.  
Cable TV  
wall jack  
120 V AC  
60 Hz  
Cable box  
output  
In  
VCR back  
Out  
switch  
3
4
VCR back AV panel  
Round wire (75ohm)  
Go to page 12 to Auto Program the TV.  
5
output  
In  
switch  
3
4
Out  
Audio  
Video  
TV back  
Leave the VCR and the television tuned to channel  
three and use the cable box to change channels.  
ANTENNA  
CABLE  
No A/ V cables are included with your TV. Without  
A/ V cables, most VCRs will not play videocassettes  
in stereo sound.  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
A/ V cables  
not included  
with TV  
206-3489-O  
P AGE 1 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Speaker Hook Up  
Connect an external speaker to the TV.  
Locate the Audio In jack on the back of the  
speaker.  
1
Speaker back  
Connect a standard audio cable from the Matrix  
Out jack on the TV, to the Audio In jack on the  
external speaker.  
2
Audio In  
TV back  
ANTENNA  
CABLE  
MATRIX  
OUT  
VIDEO  
IN  
M.P.I.  
A/ V cables  
not included  
with TV  
R- AUDIO-  
IN  
L
TV back panel  
(expanded view)  
206-3489-O  
P AGE 1 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Program (Channel Search)  
Use Auto Program to specify Antenna or cable service  
incoming signal source and automatically store all of the  
channels that are found by channel search  
1
With the Installer remote control in hand, press the  
POWER key to turn on the TV.  
1
Press MENU repeatedly so the Setup menu appears.  
2
3
Using SELECT on the remote control, highlight Auto  
Program on the screen.  
Press a Right or Left ADJ (Adjust) arrow to reach the  
Auto Program screen.  
4
5
1
4
7
0
2
5
8
3
6
Using SELECT, choose either Cable TV or Off-Air Antenna  
on your screen. (The flashing option is selected.)  
9
ENTER  
Press a Right or Left ADJ arrow to begin the Channel  
Search.  
6
7
7
2
Press ENTER when finished.  
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
3/ 5  
4/ 6  
ADJ  
Note: Auto Program finds channels being received by the TV  
tuner.  
Cable will not work unless the lodge provides a cable service.  
(If the Auto Program line appears in red, then it did not pass  
one of the internal tests. To set Auto Program to white, set the  
upper nibble of the EEPROM location $1FFh to $B0h.)  
Mini glossary  
OFF-AIR-ANTENNA  
CABLE  
If the guest can only view over-the-air broadcasts, select Antenna.  
If you provide cable service to your guests, select Cable.  
206-3489-O  
P AGE 1 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Controls  
Using the front control panel to access the menus  
1
Press ON/ OFF to turn on your TV.  
To access the menus press the MENU button on the  
control panel. Cycle through the various menus by  
pushing the button repeatedly.  
2
Press the SELECT button repeatedly to highlight the  
option you want to modify.  
3
Press either the Right or Left ADJUST button to modi-  
fy the option you have chosen.  
4
Typical Front Panel Controls  
The menu will disappear after a few seconds.  
5
VIDEO  
IN  
AUDIO  
OFF  
ON  
CAPTION  
CH  
VOL  
VOL  
CH  
There are three jacks on the front of the TV that make con-  
necting Audio/ Video devices like camcorders very simple.  
RIGHT  
LEFT  
To use the front jacks as the signal source, simply plug a  
composite video cable into the VIDEO jack. The TV will auto-  
matically change its source setting to CAMPORT, as indicated  
on the channel selection screen.  
3
1
2
4
The Front Audio/ Video jacks are a direct source con-  
nection. If you have a device plugged into the front  
Video jack, you will not be able to change channels  
until you have unplugged the front Video jack.  
Video  
Connects the video signals from any piece of  
equipment.  
Left/ Right Audio Used for stereo sound from  
various types of equipment.  
206-3489-O  
P AGE 1 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guest Remote Key Functions  
A quick list of the keys on the guest remote and what they do  
FLASHBK ( FLASHBACK)  
Returns to the last channel viewed.  
CC ( CLOSED CAPTIONING)  
Direct access to closed captions.  
Press ENTER to exit.  
POWER  
MUTE  
Turns TV On or Off.  
Turns sound Off and On, while the picture  
remains.  
CHANNEL ( UP/ DOWN)  
VOLUME ( LEFT/ RIGHT)  
Scrolls through available channels, and the  
Video Channel (Audio/ Video source).  
Adjusts the sound level.  
1
4
7
0
2
5
8
3
6
NUMBER KEYPAD  
ENTER  
Press to view the  
Channel/ Time/ Audio display or to  
remove any on-screen  
Used to key-in numbers and select channels  
directly: key-in channel numbers and press  
ENTER to go to new channel.  
9
ENTER  
display or menu.  
TIMER  
ALARM  
ALARM  
TIMER  
Press repeatedly to set the TV turn-off  
time from 10 minutes up to 4-hours.  
CHPREVIEW  
Press to display menu, then follow on-screen  
instructions to set a wake-up time.  
CHANNEL PREVIEW  
Displays the available TV channels, including  
access to guest’s Parental Control menu (if  
Active). Allows guest to select the Video  
source. (Use the Audio/ Video jacks on the  
back of the TV as the source of the picture  
and sound.)  
remote control part number  
SC652  
124-213-02  
NOTE:  
The channel and volume keys can be used by the guest to select and adjust the Parental  
Control settings, if the installer activates the Parental Control option in the Installer  
menu.  
206-3489-O  
P AGE 1 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer Remote Key Functions  
A quick list of the keys on the LP702 installer’s remote and what they do  
FLASHBK ( FLASHBACK)  
Returns to the last channel viewed.  
CC ( CLOSED CAPTIONING)  
Direct access to closed captions.  
Press ENTER to exit.  
POWER  
Turns TV On or Off.  
MUTE  
Turns sound Off and On, while the picture  
remains.  
TV/ FM  
Selects TV or Radio mode on TVs equipped  
with FM radio.  
CHANNEL ( UP/ DOWN)  
Scrolls through available channels.  
1
4
7
0
2
5
8
3
6
VOLUME ( LEFT/ RIGHT)  
Adjusts the sound levels.  
NUMBER KEY PAD  
Selects channels directly and enters  
numeric values for some options.  
9
ENTER  
ENTER  
Press to view the Channel/ Time display or  
to remove any on-screen display or menu.  
BANK  
Press and repeat to select a Channel  
Memory Bank: Bank 1, 2, 3, or 4.  
BANK  
TIMER  
ADJ  
MENU  
TIMER  
Press repeatedly to adjust TV turn-off time  
from 10 minutes up to 4-hours.  
SELECT CHPREVIEW  
CHANNEL PREVIEW  
ADJ  
Gives installer access to the guest’s  
menus. Displays the available TV channels  
and hotel guest’s Parental Control menu  
(if active). Selects the Video source. (Use  
the Audio/ Video jacks on the back of the  
TV as the source of the picture and  
sound.)  
MENU/ SELECT/ ADJ ( ADJUST)  
Adjusts on-screen menus and options.  
Press MENU repeatedly to scroll through  
menus. Use SELECT to choose an option  
and ADJ (adjust) Left/ Right to change  
the selected option.  
remote control part number  
LP702  
124-213-04  
206-3489-O  
P AGE 1 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Menus Overivew  
Descriptions of the menus and on-screen displays available to the installer  
Menu Name  
Page  
Description  
ON-SCREEN MENUS  
SETUP MENU Adjusts the basic operational features of the TV  
Auto Program 12  
Add/ Del/ Blnk 17  
Channel Labels 18  
Timer Setup 19  
Clock Set 20  
Automatically finds and stores active channels to scroll through using Channel Up/ Down.  
Manually picks and chooses which active channels will appear when using Channel Up/ Down  
Labels the channels with their network names (ABC, CBS, HBO, etc.).  
Programs a time for the TV to turn itself off after a certain period of time has elapsed.  
Sets the time.  
Caption/ Text 21  
Language 22  
Chooses the captioning or text option.  
Picks the language the on-screen menus will appear in.  
AUDI O MENU 23  
Customizes the sound. Options are:  
Bass, Treble, Balance, Audio Mode, Front Surround, SoundRite, Speakers.  
VI DEO MENU 24  
Adjusts the picture for any viewing situation. The options are: Contrast, Brightness, Color,  
Tint, Sharpness, Picture Pref.  
PARENTAL 25/ 44  
CONTROL MENU  
27  
Allows installer/ user to block program content for up to 12 hours, with the use of a password.  
OTHER MENUS AND ON-SCREEN DISPLAYS  
Channel/ Time Shows the current time, channel, (or video source) and type of incoming audio signal.  
Alarm Sets the wake-up time.  
Sleep Timer Sets the time the TV will turn off.  
Volume Shows current sound level.  
Captions Used to select Caption/ Text options.  
Ch Preview Displays the available channels and menus list.  
Channel Bank Shows currently selected channel bank.  
INSTALLER MENUS  
Installer Menus 31  
Makes adjustments to the TV’s operational features.  
206-3489-O  
P AGE 1 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Add/ Delete/ Blank  
Fine-tune the guest’s channel selection list  
CH 44 ADDED  
Press the MENU key on the Installer’s remote so the Setup  
menu appears.  
1
Press SELECT repeatedly to highlight the Add/ Del/ Blnk  
option.  
2
Using either the NUMBER keypad and ENTER or the  
Channel Up/ Down arrows on the remote, select a chan-  
nel.  
3
(If adding a deleted channel, you will need to use the  
NUMBER keypad and ENTER.)  
Using the Right/ Left ADJ arrows, pick whether that  
channel is Added, Deleted, or Blank.  
4
To continue, select another channel and repeat Step 3.  
When you are finished, press ENTER to remove menu.  
5
3
1
4
7
0
2
5
8
3
6
Adding Aux, VCR 3, VCR 4, or FM to the  
Channel Preview List  
3
Go to the Setup menu, select the Add/ Del/ BLnk option.  
Use Channel Up/ Down to select the option and choose  
Added.  
Note: If the option was turned off in the Service menu,  
you will have to reinstate it before it can appear as an  
option in the Channel Preview list.  
9
ENTER  
3/ 5  
1
BANK  
TIMER  
ADJ  
MENU  
Notes: Adding VCR 3 and/ or VCR 4 as available channels  
forces TV Channel 3 and/ or 4 to be retained, when run-  
ning Auto Program, even though the equipment connect-  
ed to the Antenna/ Cable (RF) jack (like a cable convert-  
er and/ or VCR) may be turned off.  
SELECT CHPREVIEW  
2
4
ADJ  
You can elect to Add, Delete or Blank: VCR 3, VCR 4,  
and Aux. FM can be Added or Deleted, but not Blanked.  
If you delete a channel, it isn’t gone for good. Just select it  
using the NUMBER keypad on the remote, or add it later.  
Mini glossary  
ADD  
Adds new channels to the list that the guest can scroll through when using the remote.  
DELETE  
BLANK  
Removes channels for one reason or another from the list that the guest can scroll through.  
Removes the video signal from a channel so the guest will only receive the audio signal.  
206-3489-A  
P AGE 1 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up Channel Labels  
Overview  
Channel Labels help the user identify the channel or network being  
viewed.  
CH 47 A & E  
In the Setup menu with the CH LABELS option highlighted, use the  
Adjust Left/ Right arrows to scroll through the available channel labels,  
such as, A & E, AMC, ESPN, HBO, etc. These are a series of alphabetically  
organized preset labels from which you can choose the more common  
networks. Use any of these or create custom labels.  
- - - - , The 4 dashes will allow a channel label to appear; if one is pro-  
vided by XDS. (Extended data service)  
NONE, prevents any channel label from appearing.  
LAB 1, thru LAB 20, are the 20 programmable labels.  
The 20 programmable labels can be customized for your needs.  
Each programmable label has 5 characters spaces available.  
To Program a Channel Label  
First select a channel using the NUMBER keypad and ENTER or the  
Channel Up/ Down arrows, on the Installer’s remote control.  
1
4
7
0
2
5
8
3
6
(To select a deleted channel, use the NUMBER keypad and ENTER.)  
To program a channel label, go to the Setup menu and select CH LABELS.  
9
Press the Right/ Left adjust arrow to scroll the available preset labels.  
Scroll past - - - -, scroll past NONE, to go to the first programmable label  
slot, LAB 1. Notice that the label appears with the title LAB 1, and is  
also on a dark background; which will distinguish it from the preset  
labels.  
ENTER  
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
Operating the Menu  
Use Volume Up/ Down to select the first letter.  
Press MUTE to clear the label if necessary.  
ADJ  
Use Channel Up/ Down to change the character to one of the 255 charac-  
ters available.  
Adjust Left/ Right  
Volume Up/ Down  
Switches to the next label.  
- - moves to the next or previous  
label.  
Selects character spaces  
- - moves to the next or previous  
character space.  
Channel Up/ Down  
ENTER  
Scrolls through the available  
characters.  
Accept the channel label and  
removes the menu.  
MUTE  
Removes current label,  
- - if first character space is selected.  
206-3489-A  
P AGE 1 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Set Up  
TO SET TIMER  
Sets the time the TV will automatically turn off  
Be sure to set the Clock first, see next page.  
Press MENU to show the Setup menu.  
1
Use SELECT to highlight Timer Setup.  
2
3
With Timer Setup highlighted as shown above, use the  
Left/ Right ADJ arrow to pick from the preset times, the time  
that the TV will turn itself off, or set the Sleep Timer to Off  
to disable it.  
1
4
7
0
2
5
8
3
6
9
Press ENTER to set the timer and return to TV viewing.  
4
5
The Sleep Timer may be instantly set by pressing the TIMER  
key repeatedly. When you have made your selection, press  
ENTER to set the Sleep Timer and return to TV viewing.  
ENTER  
4
1
BANK  
TIMER  
ADJ  
MENU  
5
2
SELECT CHPREVIEW  
ADJ  
3
206-3890-O  
P AGE 1 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the Clock  
Sets the TV’s internal clock  
TIMER  
11:44 PM  
1
2
Press MENU repeatedly to show the Setup menu.  
Press SELECT to highlight the Clock Set option.  
Set the current time; use the Number keypad to enter the  
hours, then minutes. For example, enter 06, then 30, to set  
6:30 on the clock.  
3
4
Use the TIMER key to specify AM or PM.  
1
4
7
0
2
5
8
3
6
Press ENTER to start the clock and return to TV viewing.  
2
3
9
ENTER  
4
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
ADJ  
1
Mini glossary  
TIME  
A four-digit figure broken down into hours and minutes; first two digits are hours, last two digits are minutes.  
First two digits that are entered when setting the clock.  
HOURS  
MINUTES The last two digits that are entered when setting the clock.  
206-3489-O  
P AGE 2 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Captions Caption/ Text  
Turns on and selects closed-captions and text options  
that appear on-screen  
CAPTION 1  
1
In the Setup menu using SELECT on the remote control,  
select Captions/ Text on the screen.  
Use the Right/ Left ADJ arrows to choose any of the follow-  
ing options: Off, Caption 1, Caption 2, Caption 3, Caption  
4, Text 1, Text 2, Text 3, or Text 4.  
2
4
3
4
Press ENTER to remove menu.  
Select Captions directly by pressing CC repeatedly to  
choose: Off, Caption 1, 2, 3, 4, or Text 1, 2, 3, 4.  
1
4
7
0
2
5
8
3
6
9
ENTER  
3
Standard closed captioning is available using the Caption 1 option.  
Not all programming has closed captioning or text available.  
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
1
2
ADJ  
Caption/ Text is a feature which allows the TV to receive the closed caption  
and/ or text options if made available by the broadcaster.  
Availability and functionality of Caption/ Text features is determined only  
by each broadcaster and may not be available in your area.  
Mini glossary  
CAPTIONS The term for the words that scroll across the bottom of your TV screen; usually the audio portion of the program provided for the hearing  
impaired.  
TEXT  
The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster.  
206-3489-O  
P AGE 2 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language  
Choose the language for the on-screen menus  
ENGLISH  
Press the MENU key on the remote control so the Setup  
menu appears.  
1
2
3
4
Press SELECT on the remote control and repeat, to high-  
light Language on your screen.  
Press a Right/ Left ADJ arrow to choose one of the fol-  
lowing options: English, Spanish or French.  
Press ENTER to return to TV viewing.  
1
4
7
0
2
5
8
3
6
9
ENTER  
4
1
2
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
ADJ  
3
206-3489-O  
P AGE 2 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Menu  
Adjust the audio options for the guest  
Press MENU repeatedly on the installer’s remote con-  
trol until the Audio menu appears.  
1
2
Using SELECT on the remote control, highlight the  
setting you want to change. Choose from:  
• Bass: Increases/ decreases lower-end sounds.  
• Treble: Increases/ decreases higher-end sounds.  
• Balance: Allows you to put the sound more to the  
left or right channel.  
1
4
7
0
2
5
8
3
6
• Audio Mode: Chooses from Stereo sound, Mono, or  
2nd Audio/ SAP.  
9
• Front Surround: Turns Front Surround sound on or  
off.  
ENTER  
4
• Soundrite: Turns the uniform volume feature on or  
off.  
1
BANK  
TIMER  
ADJ  
MENU  
• Speakers: Turns the TV speakers on or off.  
SELECT CHPREVIEW  
2/ 4  
Press a Right/ Left ADJ arrow to adjust or change the  
option you have selected.  
3
4
ADJ  
Press ENTER to return to TV viewing, or press SELECT  
and return to the Audio Menu to adjust another  
option.  
3
Not all programming is broadcast in stereo sound or has 2nd  
Audio SAP.  
Mini glossary  
STEREO SOUND  
MONO SOUND  
SOUNDRITE  
Stereo (stereophonic) sound refers to audio that’s divided into right and left sides.  
Mono (monaural) sound is one channel of sound. On more than one speaker, all the speakers play the same audio.  
Maintains a constant volume level when commercials or channel changing increases or decreases the sound level.  
206-3489-O  
P AGE 2 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Menu  
Use the Video menu to customize the picture  
Press MENU repeatedly until the Video menu appears. Your  
options are:  
1
• Contrast: Adjusts the level of difference between white  
and black in the TV picture. The more contrast, the  
brighter the picture appears.  
• Brightness: Increases or decreases amount of white in  
the TV picture.  
• Color: Adjusts levels of all colors in the TV picture.  
• Tint: Balances between amounts of red and green in the  
TV picture.  
• Sharpness: Raises or lowers the definition of the TV pic-  
ture. The lower the level, the softer the images will  
appear.  
1
4
7
0
2
5
8
3
6
• Picture Preference: Choose either Custom or Preset.  
Custom allows you to set the picture the way you want.  
Preset moves all the above options back to their original,  
factory-set levels.  
9
ENTER  
4
Use SELECT on the installer’s remote control, choose  
Contrast on your screen.  
1
2
2
3
4
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
Use a Right/ Left ADJ arrow, change the contrast level to  
your preference.  
ADJ  
Press ENTER, or MENU one more time to return to TV view-  
ing, or repeat from step two to set the other menu options.  
3
Use SELECT to choose Picture Preference on your screen.  
5
6
Use the Right/ Left ADJ arrows, to choose either the origi-  
nal settings with Preset, or use your own settings with  
Custom.  
Choose the Preset option in Picture Preference to quickly reset the  
levels to their original values.  
206-3240-O  
P AGE 2 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer Parental Control Menu  
If used, this optional feature can “block” undesirable programming from appearing on the TV  
Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can  
appear on the TV. Parental control allows the user the capability of defining which program rating they consider accept-  
able, to the younger or more sensitive viewer. It can be preset and turned either on or off by the user who specifies the  
secret 4-number code, the password. The number of hours blocked are specified. General audience and children viewer  
blocks should both be programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture  
industry; both rating systems can be used. The ratings are based mainly on the ages of children.  
Overview  
To insure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selec-  
tions below AND choose ratings from the TV Parental Guidelines Rating System on pages 41 and 42, using the Age Block  
option for General Audiences, and for Children. In addition to those, you may wish to add additional restrictions from the  
Content Block menu. See the Parental Control menu, and submenus example on the next page.  
Things to Consider before Setting Up Parental Control  
Determine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, all more restrictive rat-  
ings will be automatically blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.)  
Do you want the auxiliary video source signal blocked? (Block the picture and sound of the equipment, such as a VCR,  
connected to the TV Audio/ Video input jacks; in the Aux. Block option.) Or leave unblocked, and Parental Control will  
restrict the video input based on the restrictions you have specified.  
Block program “Content” based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes, Violence  
Scenes, or Fantasy Violence Scenes; in the Content Blk option.  
How many hours do you want Parental Control to be active? You can set the option for up to 12 hours. (See next page.)  
Select a secret password; in the Set Password option. Use the number keys on the remote. If you forget the password, see  
note below.  
Do you want Parental Control to be active all the time? If not, you can turn it on or off; with the Lock On/ Off option.  
You should set different Parental Control viewing restric-  
tions for general audiences and for children - - both  
should be active at the same time.  
If you choose to have the Aux inputs unblocked, the ratings  
you specify will automatically restrict the programming that  
appears from the video sources.  
Simply specifying one content block such as Sex Scenes,  
will not automatically block another content in the pro-  
grams from appearing.  
You cannot disable Parental Control by disconnecting the TV  
from power. Block hours will automatically reset to the origi-  
nal block time setting specified if power is disconnected.  
Notes  
Reset Parental Control Block Hours to Zero and Cancel Password  
This provides the lodge staff and the installer a means to reset the TV to normal operation, if a guest  
has either forgotten the password or has left Parental Control Block active after checking out.  
On the installer’s remote control, press and hold down MENU until the menu disappears (about 6 sec-  
onds).  
Immediately press 9, 8, 7, 6 and then CC.  
This will reset the Block Hours to Zero and cancel the current 4-number password.  
206-3489-A  
P AGE 2 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer Parental Control Menu  
After you have read the preceding page, follow instructions below to set up and activate Parental Control  
1
MPAA RATING  
CONTENT BLOCK  
TO BLOCK  
DIALOG  
LANGUAGE  
From TV-PG  
SEX SCENES  
VIOLENCE  
FV VIOLENCE  
NO CONTROL  
Note: Use the installer’s remote control to  
specify Parental Control settings.  
As shown above, with the Parental Control menu on-  
screen, use SELECT to choose an option, like Content  
Block.  
2
3
Use the Left/ Right ADJ arrow to show the Content  
Block menu, to adjust or set the rating for an option.  
For Sex Scenes for example, use the “From TV-PG” set-  
ting. (See the Mini Glossary, Ratings Charts on pages 41  
and 42 for rating meanings.)  
1
4
7
0
2
5
8
3
6
9
After you have selected and adjusted the parental con-  
trol menu options to your preferences:  
4
ENTER  
- Set the number of hours Parental Control will be on.  
- Set a 4-number password.  
- Set the Lock On/ Off option to either on or off.  
1
BANK  
TIMER  
ADJ  
MENU  
SELECT CHPREVIEW  
Note: Some broadcasts and videotapes do not  
include rating information.  
2
3
ADJ  
Notes  
Reset Maximum Number of Parental Control Default Block Hours  
You can change the Block hours from the 12-hour default setting to up to 99 hours.  
In the Service Menu, item:  
49 MAX BLK HRS 12, use the Left/ Right adjust arrow to set a different default number of hours.  
To Turn the Parental Control Feature Off/ On  
In the Service Menu, item:  
53 V-CHIP 0 or 1,  
use the Left/ Right adjust arrow to set to 0, Parental Control will be disabled.  
use the Left/ Right adjust arrow to set to 1, Parental Control will be on.  
206-3489-A  
P AGE 2 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Menus & On-Screen Displays  
Press the remote keys indicated below to access these menus and displays  
CH 9  
3:12 PM  
STEREO  
Alarm Menu  
Press ALARM. Sets the time the  
wake up alarm will sound.  
Channel/ Time/ Audio Display  
Press ENTER. Shows currently  
selected channel or source, current  
time if the clock has been set, and  
incoming audio signal.  
Sleep Timer Menu  
Press TIMER. Sets the time to auto-  
matically turn the TV off and shows  
remaining time before TV shutoff.  
CH PREV  
5
9
20  
32  
44  
66  
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
CAPTIONS  
PRESS CC  
VOLUME  
CH  
TO SELECT, ENTER TO QU  
FOR PARENTAL CONTROL  
CC  
Ch Preview Menu  
Closed Captions Menu  
Press CC. Sets Caption/ Text options:  
Off, Caption 1, 2, 3, 4, or Text 1, 2,  
3, 4.  
Volume Display  
Press VOLUME. Shows currently  
selected sound setting.  
Press CH PREVIEW. Displays list of  
the available TV Channels, Guest  
Parental Control menu (if active)  
and Video Channel access. Press  
CHANNEL Up/ Down to select a  
channel, or menu, then ENTER to go  
to channel or menu.  
CHANNEL BANK  
BANK 3  
Channel Banks Menu  
Press BANK. Accesses the Channel  
Banks menus: Bank 1, Bank 2,  
Bank 3, Bank 4.  
206-3489-O  
P AGE 2 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Managing the Channel Banks  
The TV has four channel banks, where the administrator or installer can store groups of TV channels  
PLANNING THE CHANNEL BANKS  
ADDING / DELETING CHANNELS  
Generally, TV channels are grouped into “program pack-  
ages” with terms that are proposed to the end user. The  
user then opts for a package. Below is an example of how  
TV channels may be grouped.  
A previously prepared programming chart is helpful.  
1. Run auto Program (in the Setup menu). The channels  
available in your cable/ antenna will be entered in the  
channel banks 1, 2, 3, and 4.  
Note: Channels previously “blanked” will be cleared; chan-  
nels entered that are not currently available, will be delet-  
ed.  
You may plan your package by using a chart like the one  
after the following page.  
2. Select a channel bank with an installer remote - -press  
SOURCE/ BANK (and repeat). CHANNEL BANK and BANK  
number will be displayed.  
3. Use the ADD/ DEL/ BLNK item (also in the Setup menu)  
to customize your program package. You may delete chan-  
nels or add some that have not been entered. You can also  
“Blank” a channel for accomodating an audio-only pro-  
Remember, you can “blank” a channel for accommodating  
audio-only, such as an FM radio station or in-house com-  
munication.  
Sometimes, only one or two channel banks may be need-  
ed. You may leave any unused bank with the channels  
entered during Auto Program; or, you may delete the chan- gram source or in-house communication. The  
nels. However, you may want to leave at least one channel  
in any unused bank. Then, if someone selects an “unused”  
bank, that channel will assure them that the TV is func-  
tional.  
“ADD/ DEL/ BLNK” item on pages ...... has more details.  
Note: The Blank Channel feature is global. A channel will  
be blanked in all channel banks.  
4. Repeat steps 2, and 3 to program another channel  
bank.  
Note: Some channels from factory testing may be in the  
channel banks if you have not yet run Auto Program.  
CHANNEL BANK  
BANK 1  
Channel Bank  
Program package  
1
2
3
4
Basic cable channels  
Extended cable channels  
Extended with premium channels  
Other cable service options  
Channel bank number display  
(Grouping is provided as an example only.)  
The BLNK (blank) channel function is “global” -- the same  
channel number is blanked in channel banks 1, 2, 3, and 4.  
206-3489-O  
P AGE 2 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Managing the Channel Banks  
Examples of typical channel banks charts filled in  
Figure 1. Typical channel banks after running Auto Program  
B
A
N
K
Purpose  
Channel Number  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25  
1
2
3
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A = Active - - Channel was found during AUTO PROGRAM  
Figure 2. Typical channel banks after running Auto Program, and customizing with Add/ Del/ Blnk  
B
A
N
K
Purpose  
Channel Number  
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25  
1
2
3
4
5
6
7
8
9
1
2
3
4
Basic  
BC A  
BC A  
BC A  
BC A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
A
A
A
D
D
D
A
D
A
A
A
D
A
A
A
D
D
D
A
D
A
A
A
D
A
A
A
D
A
A
A
D
D
A
A
D
D
D
A
D
D
A
A
D
D
A
A
Extend  
All CTV  
Other  
A = Active  
D = Deleted  
Channel was found during AUTO PROGRAM  
Channel was deleted using Add/ Del option.  
BC = Blanked Channel  
Channel was blanked using BLANK channel option (ADD/ DEL/ BLNK).  
ADDING / DELETING CHANNELS  
It is best to do ADD / DEL customizing before doing “BLNK.”  
ADD and DEL (not BLNK) can be used independently for chan-  
nel banks 1, 2, 3, and 4.  
AUTO PROGRAM enters the same channels in banks 1, 2, 3,  
and 4.  
A channel blanked, is blanked in all channel banks.  
Channel allocations in tuning bands:  
AUTO PROGRAM removes any channels previously customized  
with ADD / DEL / BLNK. The channels available on your  
antenna / cable will be entered, and any channels previously  
entered but not currently available will be deleted.  
BROADCAST: 2 – 69  
CABLE – CATV, HRC or ICC: 1 – 125  
206-3489-O  
P AGE 2 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Managing the Channel Banks  
PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS (or use photocopies)  
B
A
N
K
Purpose  
Purpose  
Purpose  
Purpose  
Channel Number  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25  
1
2
3
4
B
A
N
K
Channel Number  
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50  
1
2
3
4
B
A
N
K
Channel Number  
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75  
1
2
3
4
B
A
N
K
Channel Number  
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  
1
2
3
4
B
A
N
K
Purpose  
Channel Number  
101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 FM  
1
2
3
4
206-3489-O  
P AGE 3 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer menus  
Use the Installer menus to make adjustments  
Accessing the Installer menu  
1390-00 0.00 01  
03 VERT POS  
Installer menus can be accessed by using the installer’s remote control.  
Just press and hold MENU (about 8 seconds) until the display changes,  
then press 9, 8, 7, 6, then ENTER. To exit the Installer menu, press ENTER  
again. Any changes you make will be stored in nonvolatile memory.  
13  
The Installer menu opens with item 03, VERT POS. Press the Up/ Down  
arrow keys to sequence through the various items. Or, access an item  
directly by entering the line number, then pressing MENU. For example, to  
access the Start channel/ volume feature which is on line 11, press 11, then  
MENU. To change a current setting use the Left/ Right ADJ keys.  
Using the Installer menu  
XX/XX/9X  
TE11111111  
Items 00-22 are immediately accessible only upon entering the Installer  
menu. Their numbers, descriptions, ranges, factory default settings, and a  
place for listing any changes made on-site are given below. A second sec-  
tion of the Installer menu that is intended for qualified service technicians  
only is not shown (items 23-52). Normally these items do not require  
adjustment.  
Installer should leave item 1 FACT MODE  
set to 0 (default). Items 23-52 are ser-  
vice-type adjustments and only qualified  
technicians having specialized test equip-  
ment should access them.  
Items in the Installer menu:  
Item  
00  
01  
02  
03  
04  
05  
06  
07  
08  
9
Description  
FACT MENU  
Range  
0 - 1  
0 - 1  
0 - 7  
0 - 30  
0 - 45  
0 - 7  
0 - 63  
0 - 63  
0 - 1  
0 - 1  
0 - 255  
0 - 1  
0 - 1  
0 - 1  
0 - 3  
0 - 1  
0 - 1  
0 - 1  
0 - 1  
0 - 1  
0 - 1  
0 - 1  
0 - 1  
Fact. Set  
Recommend. Setting  
Leave default set 0  
0
1
PRESET PX  
POWER MANAGE  
VERT POS  
0
15  
29  
0
HORZ POS  
BAND/AFC  
MIN VOLUME  
MAX VOLUME  
AC ON  
0
63  
0
KEY DEFEAT  
STRT CH/VOL  
HOSPITAL MODE  
CHAN LOCK  
GHOST CH.  
0
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
255  
0
Leave default set 0  
Leave default set 0  
0
0
SCAN MODE  
TEXT MODE  
SLEEP TIMER  
ALARM  
0
1
1
1
CH. OVER RIDE  
OLD OCV  
1
0
Set to 1 for old Spectramate systems  
CAPTION LOCK  
FUNCTION PRE  
FEATURE LEVEL  
0
0
1
Leave default set 1  
206-3489-O  
P AGE 3 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer menus  
Use the Installer menus to make adjustments  
00 FACT MENU (Factory Mode)  
Used to access and customize Installer menu settings using the  
installer type remote.  
If some channels were not found by AUTO PROGRAM, select the  
appropriate AFC setting here and add the channels using the  
ADD/ DEL option in the Setup Menu.  
01 PRESET PX (Preset Picture)  
06 MIN VOLUME (Minimum Volume)  
Saves your custom video settings (color, tint, contrast, and  
brightness) in nonvolatile memory (not affected by power loss).  
Memory status is indicated by a 1 for “custom settings already  
stored,” or 0 for “custom settings have not been stored.”  
This function determines the minimum volume level allowable  
with the VOLUME (VOL) Up/ Down control. In this way, for exam-  
ple, someone cannot set the volume too low to hear. The range is  
from 0 to 63—change values with ADJUST . The factory default is  
0, which provides full range of volume control. It may be best to  
set the same value on every TV. NOTE: The minimum volume level  
cannot have a value setting higher than in the MAX VOLUME level  
(described below).  
Make all custom video settings before you access the Installer  
menu and PRESET PX. When you use the ADJUST keys to toggle  
from 1 - 0, any changes in the video settings will be stored sure  
they are correct! These settings become the PRESET values for the  
PICTURE PREF option of the Video Menu. (For more information  
refer to the Video Menu section of this manual.)  
07 MAX VOLUME (Maximum Volume)  
This function determines the maximum volume level allowable  
with the VOLUME VOL Up/ Down control. In this way, for example,  
someone cannot set the volume level high enough to disturb oth-  
ers. The range is 0 to 63, with 63 as the default which gives the  
patient the full range of volume control. Change values with  
ADJUST keys. It may be best to set the same value on every TV.  
NOTE: The maximum volume level cannot have a value setting  
lower than the MIN VOLUME level (described above).  
02 POWER MANAGE (Power Management)  
The POWER MANAGE function is for saving energy. When set to 0,  
Power Manage is OFF. Settings range from 0 - 7, with 1 - 7 repre-  
senting the hours that the TV will remain on, unless there has  
been activity from either the control panel or remote. One minute  
before turning off, the message “PRESS ANY KEY TO KEEP TV ON”  
appears.  
08 AC ON (AC Power Switchable)  
03 VERT POS (Vertical Position)  
Allows the TV to turn ON just by applying AC power. Pressing the  
ON button is not necessary. This is desirable when the TV is  
plugged into a cable box or a power outlet controlled by a wall  
switch. Use ADJUST to select 0 or 1, where 0 is the default is  
OFF, and 1 is ON.  
Moves captions and displays vertically on the screen. Use the  
ADJUST keys. Typical value is 15. Black bars top and bottom  
define the active screen area.  
04 HORZ POS (Horizontal Position)  
Moves captions and displays horizontally on the screen. Use the  
ADJUST keys. Typical value is 29. Black bars top and bottom  
define the active screen area.  
NOTE: When set to 1 (ON), the TV does not respond to ON/ OFF  
commands from either the remote or the control panel, and the  
SLEEP TIMER is also nonfunctional.  
05 BAND/ AFC (Band/ Automatic Frequency Control)  
9 KEY DEFEAT (Keyboard Defeat)  
There are 8 possible settings for this option:  
When set to 1, it prevents the end user from accessing screen  
menus on the front panel—MENU, SELECT, and ADJUST do not  
function. When set to 0, those keys are functional. The menus can  
always be accessed with MENU on the remote.  
0 = Broadcast Fixed4 = Broadcast AFC  
5 = CATV Fixed  
6 = HRC Fixed  
7 = ICC Fixed  
1 = CATV AFC  
2 = HRC AFC  
3 = ICC AFC  
10 STRT CH/ VOL (Start Channel/ Volume)  
When active, this function allows you to determine the initial vol-  
ume level setting and channel number when the TV is turned ON.  
This feature is useful for an in-house information channel, since  
the TV would always select that channel when it is turned on.  
When inactive, the volume level and channel retain the settings  
when the set was last used.  
Channels are accessed faster when fixed modes are used. The AFC  
(search modes) should only be used when some channels are not  
on nominal frequencies. NOTE: BAND is automatically set by AUTO  
PROGRAM.  
206-3489-O  
P AGE 3 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer menus  
Use the Installer menus to make adjustments  
The range of values is 0 - 255. Use (adjust) keys to choose: (1)  
15 TEXT MODE  
With number 255 the feature is inactive. (2) Other numbers deter- Determines whether TEXT 1, TEXT 2,TEXT 3, or TEXT 4 decoding is  
mine the start channel. (3) Set the volume level as desired before  
exiting the Installer menu. 0 is the “AUX” channel.  
enabled when TEXT is turned on (either from the Setup Menu or  
directly with CC on the remote).  
TIP: Set Text Mode to 1 only if text is offered in your video sys-  
tem.  
11 HOSPITAL MODE  
Not used in Concierge-series TVs. Leave at default setting 0.  
16 SLEEP TIMER  
12 CHAN LOCK (Channel Lock)  
When set to 1, the SLEEP TIMER feature may be used (but no  
message is displayed prior to turn-off). When set to 0, the sleep  
timer is not available.  
When set to 1 the CHAN LOCK is ideal if a cable box (or similar) is  
the sole source for programming—and the TV must always be on  
the same channel. Changing channels with the Channel up/ down  
or or keypad numbers is impossible. Channel Lock is inactive  
when set to 0 (default).  
17 ALARM  
Gives you the option of making the alarm function available to  
the end-user. Set to 1, alarm function is available. Set to 0 to  
withhold this function. The clock must be set in order to use the  
alarm.  
Generally, this feature is used in connection with START  
CHAN/ VOL (line 11) where the start channel may, for example, be  
set to 3 or 4. If the start channel is 3 then the TV will remain on  
channel 3. NOTE: When channel lock is active AUTO PROGRAM and  
CH. ADD/ DEL in the SETUP MENU are not active.  
18 CH. OVERRIDE (Channel Override)  
When set to 1, the user is allowed to select channels with either  
Channel up/ down or by direct keypad entry. When set to 0, only  
those channels that are entered for scanning may be selected.  
13 GHOST CH. (Ghost Channel)  
When set to 1, the current channel number is displayed in the  
upper right corner of the CRT. The number moves slightly to pre-  
vent damage to the screen. The default is “0” or OFF. NOTE: When  
captions are on, the “ghost channel” is not displayed.  
19. OLD OCV (On Command Video  
Set to 1 for operation with “SpectraMate” systems from On  
Command Corporation.  
)
14 SCAN MODE  
20. CAPTION LOCK  
Allows variation in setting the On/ Off with Channel UP/ DOWN.  
Set to 1 to restore previous caption On/ Off state after TV turns  
You may opt for TV channels only; TV channels + Off/ ON; TV chan- off when set to 0, captions are always off when TV is initially  
nels + FM radio; TV channels + FM radio + Off/ On with these set-  
tings for Scan Mode:  
turned on.  
21. FUNCTION PRE  
Scan mode  
Characteristics  
Set to 0 to suppress CHANNEL PREVIEW FUNCTION menu with  
some pay per view systems.  
0
1
Channel up/ down keys change chan-  
nels only.  
Channel down below the lowest  
channel (or channel up higher than  
the highest) and TV turns off.  
Channel Up/ Down + FM.  
22. FEATURE LEVEL  
Set to ZEN 1 for Zenith compatible remote control operation, set  
to 0 for PLbl for Zenith private label compatible remote control  
operation.  
2
3
Channel Up/ Down + Off/ On.  
Some of the functions shown above may not be available on your TV (such as FM).  
206-3489-O  
P AGE 3 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LT1500 QuickSet Programmer  
Use the LT1500 QuickSet Programmer to duplicate the TVs setup  
The optional QuickSet II Programmer (LT1500) allows custom setup and programming  
information to be quickly copied from a master TV into multiple television sets. Once  
learned from the master, setup data is retained in the LT1500 for future use and recall.  
When using the LT1500, operation will be easier if the TV set is connected to a good  
quality signal and operating with a stable picture displayed. To operate the LT1500, use  
the indicated keys on an HP602, LP702, or MBR3447 remote, or the front panel keys on  
the TV receiver.  
Set up a master TV set using your remote and following the instructions in this operating guide. Set all features you wish to  
customize including the channel scan list, channel labels, and service menu setups.  
1
Connect the LT1500 to the master TV set using the cable provided with the programmer. Connect the cable between the MPI  
jack on the TV and the programmer. Connecting the programmer to the TV set automatically activates the programmer power-  
switching circuits.  
2
Once connected, check the “Status Indicator” LED on the programmer. The indicator should be flashing a green double-blink  
“heartbeat” pattern.  
3
If communications are good, the sign-on screen will be displayed on the TV screen as shown on the quick setup instructions  
which accompany the LT1500. If you intend to set the TV or programmer real-time clocks, note the clone clock and TV clock  
time settings, then press a key to proceed to the main clone menu.  
If you have previously stored a TV setup in a particular clone memory, it may be changed if desired by overwriting it with a  
new setup. There is no need for a separate memory clear operation.  
Item 1: Learn From TV  
Setups stored in programmer memory are nonvolatile and will be retained even after a battery change.  
Press (1) then ON/ OFF, POWER, or ENTER to begin the learning process. Alternatively, use the TV front panel CHANNEL UP or  
CHANNEL DOWN keys to highlight your choice, then press ON/ OFF, POWER, or ENTER to activate.  
1
The next screen will allow you to choose which of the available memories will be used to store this TV setup. With four memo-  
ries available, four different TV setups can be stored in the LT1500.  
2
Using the on screen menu, choose a memory or choose to return to the main selection menu, then press ON/ OFF, POWER, or  
ENTER to activate the selection.  
3
The next screen gives you one last opportunity to check the versions of TV and clone setups. Press ON/ OFF, or POWER to acti-  
vate the learning cycle or any other key to return to the selection menu to make other choices.  
4
Once the process has begun, the TV screen will display the ”LEARNING IN PROGRESS” message. Please wait until the process is  
completed. When the TV screen displays “LEARNING COMPLETED”, press any key to end the learning process and return to the  
clone selection menu.  
5
A slow flashing green light indicates there is a problem with the communications between the TV and the programmer. In this  
case, check for a damaged cable, poor contacts, or other connection troubles.  
If the status indicator is red, the programmer batteries are low and should be replaced. Use 4 good quality alkaline AA batteries.  
206-3489-O  
P AGE 3 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clone Selection Menu Choices  
Use the LT1500 QuickSet Programmer to duplicate the TVs setup  
Item 2: Teach the TV  
Press (2) then ON/ OFF, POWER, or ENTER to begin the teaching process. Alternatively, use the TV front panel CHANNEL UP or  
CHANNEL DOWN keys to highlight your choice, then press ON/ OFF, POWER, or ENTER to activate.  
1
The next screen will allow you to choose which of the 4 available memories will be copied to this TV.  
2
3
Press the desired memory number, then ON/ OFF, POWER, or ENTER to begin the teaching process. Alternatively, use the TV  
front panel CHANNEL UP or CHANNEL DOWN keys to highlight your choice, then press ON/ OFF, POWER, or ENTER to begin.  
Using the on screen menu, choose a memory or choose to return to the main selection menu, then press ON/ OFF, POWER, or  
ENTER to activate the selection.  
4
5
6
The next screen gives you one last opportunity to check the versions of TV and clone setups . Press ON/ OFF, or POWER to  
activate the teaching cycle or any other key to return to the selection menu to make other choices.  
The TV screen will display the ”TEACHING IN PROGRESS” message. Please wait until the process is complete. When the TV  
screen displays “TEACHING COMPLETED”, press any key to return to the clone selection menu.  
Item 3: Set Clone Clock From TV  
To initially set the real time clock in the LT1500 or update the time, press (3), then press ON/ OFF, POWER, or ENTER to copy  
the current TV time to the clone clock. Alternatively, use the TV front panel CHANNEL UP or CHANNEL DOWN keys to highlight  
your choice, then press ON/ OFF, POWER, or ENTER to activate.  
1
2
This process will return you to the sign-on screen to display the clone and TV clock settings. You may press a key to go to  
the clone selection menu and perform other functions, or simply disconnect if time setting was your only task.  
Item 4: Set TV Clock From Clone  
To set the real time clock in the TV, press (4), then press ON/ OFF, POWER, or ENTER to copy the current clone time to the TV  
clock. Alternatively, use the TV front panel CHANNEL UP or CHANNEL DOWN keys to highlight your choice, then press ON/ OFF,  
POWER, or ENTER to activate.  
1
2
This process will return you to the sign-on screen to display the clone and TV clock settings. You may press a key to go to  
the clone selection menu and perform other functions, orsimply disconnect if time setting was your only task.  
Item 5: Display TV Setup  
Press (5) then ON/ OFF, POWER, or ENTER to begin the teaching process. Alternatively, use the TV front panel CHANNEL UP or  
CHANNEL DOWN keys to highlight your choice, then press ON/ OFF, POWER, or ENTER to activate.  
1
The TV screen will display the items in the Installer menu setups for you to observe. Use this function to quickly check a TV  
for the correct setup.  
2
3
Press any key to clear the display and return to the clone selection menu.  
206-3489-O  
P AGE 3 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clone Selection Menu Choices  
Use the LT1500 QuickSet Programmer to duplicate the TVs setup  
Item 6: Display Clone Setup  
Press (6) then ON/ OFF, POWER, or ENTER to begin the teaching process. Alternatively, use the TV front panel CHANNEL UP  
or CHANNEL DOWN keys to highlight your choice, then press ON/ OFF, POWER, or ENTER to activate.  
1
The TV screen will display the memory selection menu.  
2
Press the desired memory number, then ON/ OFF, POWER, or ENTER to display the contents of the selected memory.  
Alternatively, use the TV front panel CHANNEL UP or CHANNEL DOWN keys to highlight your choice, then press ON/ OFF,  
POWER, or ENTER to begin.  
3
The TV screen will display the items in the Installer menu setups for you to observe. Use this function to quickly check the  
contents of a particular clone memory for the correct setup.  
4
Press any key to clear the display and return to the clone selection menu.  
5
Operation Notes  
Disconnect the LT1500 from the TV set when you have completed the desired task. Disconnecting the clone automatically  
switches it off. The real-time clock continues to run when the main circuits are switched off.  
After replacing exhausted batteries, or if the programmer behaves strangely after a static shock, use a paper clip or similar  
instrument inserted through the small hole marked ”RESET” to activate the internal reset switch and restore normal opera-  
tion. After a reset, check the real-time clock setting. It may be necessary to reset the clock from a TV containing the cor-  
rect time.  
The LT1500 programmer is designed to be used with TV sets containing the 221-01006 and later processors. Use with earli-  
er TV sets may give unpredictable results. The specific microprocessor used in any TV set may be determined by activating  
the Installer menu. The microprocessor part number appears at the top of the screen when the Installer menu is activated.  
Processors before the 221-01006-04 have a limited screen display capability. They can not display entire screens as shown  
in the quick setup instructions accompanying the LT1500 programmer. Use the printed menu illustrations on the quick  
setup sheet as an aid to making your programming choices.  
When cloning operations are complete, just unplug the LT1500 for the TV set.  
If the TV does not display a picture (blank screen) after a few seconds, just change channels.  
206-3489-O  
P AGE 3 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Routine TV cabinet and screen cleaning  
Careful and regular cleaning can extend the the useful service life of the TV. Be sure to turn the power off and pull out  
the plug before you begin any cleaning.  
Screen Cleaning  
1. Here’s a great way to keep the dust off the screen for a while. Wet a soft cloth in a mixture of lukewarm water  
and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to  
wipe the screen.  
2. Make sure the excess water is off the screen, and then let it air-dry before turning it on.  
Cabinet Cleaning  
1. Use a soft cloth with a mild soap solution to wipe the cabinet. (Avoid using any harsh, industrial strength vari-  
ety of cleaner.)  
2. Rinse the cloth and wipe the cabinet again.  
3. Let the cabinet air-dry before turning the TV on.  
Wood Cabinet  
Minimal Usage  
Use a quality wood cleaner and polish. This will protect the TV from dirt and dust, as well as keep the cabinet  
looking new.  
If you leave the TV dormant for a long time, it’s a good idea to unplug the power to protect against  
possible damage from lightning or power surges. If you use an off-air antenna, you may also want to  
disconnect it from the back of the TV.  
If you unplug the TV, you may have to reset the clock using the Clock Set menu described earlier. See  
page 20.  
206-3489-O  
P AGE 3 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Some quick and easy tips to resolving problems  
SYMPTOMS  
SOLUTIONS  
Snowy picture and unclear sound.  
• Check your antenna connection or location  
• Check your cable input.  
• Check to see if the TV/ .VCR button on your VCR has the TV selected  
• Check your antenna direction and/ or location.  
• Check your cable input  
Multiple images or ‘ghost shadows.’  
• Make sure the cable from your antenna to your Entertainment Machine is  
properly connected.  
The following may cause image problems or distortion:  
Electrical appliances, powerful lights, cars, trucks; computers or  
portable phones; medical equipment  
Interference: Sharp lines across  
the screen and lousy sound.  
• If possible increase the distance between your Entertainment Machine and  
the offending appliance. Or shut one of them off.  
• Check volume levels.  
• Make sure the TV is not Muted.  
Normal picture but no sound.  
• Try another channel. The problem may be the broadcast, not your  
Entertainment Machine.  
• Are the Audio A/ V cables properly installed?  
• Are the wires for external speakers (if you have external speakers)  
properly installed?  
• Make sure your speakers turned on under the Audio menu.  
• If your audio mode is set to SAP, that channel may not have a SAP program.  
• Are you in TV or cable tuning mode, and should be in the other?  
• Make sure output channels on all A/ V equipment are on the same channel (3 or 4).  
• Check that all connections are tight.  
No picture and unclear sound.  
No picture and no sound.  
• Is the AC power plugged in?  
• Check that your AC power outlet works. (Test it by plugging in something  
else or try another plug.)  
• Make sure your brightness and audio controls are set properly.  
• Try another channel. The problem may be with the broadcast.  
• Check the color control in the Video menu.  
• Try another channel. The problem may be with the broadcast.  
No color, but the sound is O.K.  
• The CC (closed caption) option may be in Text mode. Select Caption 1, or OFF  
in the Captions/ Text menu.  
Picture has a big black box  
on it, but the sound is O.K.  
• Make sure the batteries are fresh and installed properly.  
Remote control doesn’t work.  
• Make sure the battery on the single side (located on bottom right when remote  
transmitter is pointed toward the TV) is polarized properly (see page 10).  
Menu options can’t be  
changed or selected.  
• Try unplugging the TV for a few minutes, then plug it back in.  
No picture or sound  
when any non-cable source  
is selected.  
206-3489-O  
P AGE 3 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
A list of definitions for words found in this guide  
75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a  
wire sticking through the middle. It screws onto the threaded jack on the back of the TV.  
300 TO 75 OHM  
ADAPTER  
A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.  
They are usually about an inch long with two screws on one end and a round opening with a wire sticking out on  
the other end.  
A/ V CABLES  
Audio/ Video cables. Three cables bunched together—right audio (red), left audio (white), and video (yellow).  
A/ V cables are used for stereo playback of videocassettes and for higher quality picture and sound from other  
A/ V devices.  
A/ V DEVICE  
ADD  
Any device that produces video or sound (VCR, DVD, cable box, or television).  
This function lets you add new channels to list that you'll scroll through when using your remote.  
An electronic device that amplifies sound from a television, CD player, VCR, DVD or other A/ V device.  
AMPLIFIER  
ANTENNA  
The physical receiver of television signals sent over the air. A large metal piece of equipment does not always have  
to be visible for your home to be using an antenna.  
AUTO PROGRAM  
DELETE  
Auto Program has the Concierge TV automatically find all the channels available in your area.  
Lets you remove channels from the list the guest will scroll through using the guest remote.  
Refers to the jack that receives a signal from a TV, VCR or other A/ V device.  
INPUT  
JACK  
A connection on the back of a TV, VCR, or any other A/ V device.  
MONO SOUND  
OUTPUT  
Mono (monaural) sound is one channel of sound. On more than one speaker, all the speakers play the same audio.  
Refers to the jack that sends a signal out of a VCR, DVD, or other A/ V device.  
Second Audio Programming (SAP) is another, separate, audio channel  
2ND AUDIO  
PROGRAMMING/ SAP Available with some programming. Choosing SAP often refers to listening to audio in another language, such as  
Spanish or French.  
SIGNAL  
Picture and sound traveling through a cable, or over the air, to your television screen.  
Stereo (Stereophonic) sound refers to audio that’s divided into right and left sides.  
Device that picks up the signal and turns them into picture and sound.  
STEREO SOUND  
TUNER  
206-3489-O  
P AGE 3 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guest Remote Control Key Functions  
A quick list of the keys on the guest remote and what they do  
FLASHBK ( FLASHBACK)  
Returns to the last channel viewed.  
CC ( CLOSED CAPTIONING)  
Direct access to closed captions.  
Press ENTER to exit.  
POWER  
MUTE  
Turns TV On or Off.  
Turns sound Off and On, while the picture  
remains.  
CHANNEL ( UP/ DOWN)  
VOLUME ( LEFT/ RIGHT)  
Scrolls through available channels, and the  
Video Channel (Audio/ Video source).  
Adjusts the sound level.  
1
4
7
0
2
5
8
3
6
NUMBER KEYPAD  
ENTER  
Press to view the  
Channel/ Time/ Audio display or to  
remove any on-screen  
Used to key-in numbers and select channels  
directly: key-in channel numbers and press  
ENTER to go to new channel.  
9
ENTER  
display or menu.  
TIMER  
ALARM  
ALARM  
TIMER  
Press repeatedly to set the TV turn-off  
time from 10 minutes up to 4-hours.  
CHPREVIEW  
Press to display menu, then follow on-screen  
instructions to set a wake-up time.  
CHANNEL PREVIEW  
Displays the available TV channels, including  
access to guest’s Parental Control menu (if  
Active). Allows guest to select the Video  
source. (Use the Audio/ Video jacks on the  
back of the TV as the source of the picture  
and sound.)  
remote control part number  
SC652  
124-213-02  
NOTE:  
The channel and volume keys can be used by the guest to select and adjust the Parental  
Control settings, if the installer activates the Parental Control option in the Installer  
menus.  
P AGE 4 0  
206-3489-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guest Parental Control Menu  
This optional feature can be used to “block” undesirable programming from appearing on the TV  
This TV offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on  
the TV. Parental control allows the user the capability of defining which program rating they consider acceptable, to the  
younger or more sensitive viewer. It can be preset and turned either on or off by the user who specifies the secret 4-num-  
ber code, the password. The number of hours blocked are specified. General audience and children viewer blocks should  
both be programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture industry; both  
rating systems can be used. The ratings are based mainly on the ages of children.  
Overview  
To insure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selec-  
tions below AND choose ratings from the TV Parental Guidelines Rating System on the next page, using the Age Block  
option for General Audiences, and for Children. In addition to those, you may wish to add additional restrictions from the  
Content Block menu. See the Parental Control menu, and submenus example on the next page.  
Things to Consider before Setting Up Parental Control  
Determine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, all more restrictive rat-  
ings will be automatically blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.)  
Do you want the auxiliary video source blocked entirely? (Block the content of the equipment, such as a VCR, connected  
to the TV Audio/ Video input jacks; in the Aux. Block option.) Or leave unblocked, and Parental Control will restrict the  
video picture and sound based on the restrictions you have specified.  
Block program “Content” based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes, Violence  
Scenes, or Fantasy Violence Scenes; in the Content Blk option.  
How many hours do you want Parental Control to be active? You can set the Hours option for up to 12 hours.  
Select a secret password; in the Set Password option. Use the number keys on the remote. Don’t forget the password, it is  
the only way you can access the Parental Control menu and change rating selections, or turn Parental Control off.  
Do you want Parental Control to be active all the time? If not, you can turn it on or off; with the Lock On/ Off option.  
You should set Parental Control viewing restrictions  
for general audiences and for children - - both  
should be active at the same time.  
If you choose to have the Aux inputs unblocked, the rat-  
ings you specify will automatically restrict the programming  
that appears from the video sources.  
Simply specifying one content block such as Sex  
Scenes, will not automatically block another content  
in the programs from appearing.  
You cannot disable Parental Control by disconnecting the TV  
from power. Block hours will automatically reset to the orig-  
inal block time setting specified if power is disconnected.  
Mini glossary  
MOTION PICTURE ASSOCIATION OF AMERICA (MPAA) RATING SYSTEM  
G
PG  
General Audiences  
Parental Guidance  
Suggested  
Content not offensive to most viewers.  
Content is such that parents may not want their children to view the program.  
PG-13  
Parental Guidance  
Suggested  
Program is inappropriate for preteens, with a greater degree of offensive material  
than a PG rated program.  
R
NC-17  
X
Restricted viewing  
Restricted Viewing  
Hard Core Films  
Not for children under age 17. Strong elements of sex and/ or violence.  
Not for children under age 17 under any circumstances. Strong sexual content.  
Same as NC-17 rating.  
Note: Zenith Electronics Corporation is not liable for any program content that appears when using this rating system; as always, user  
discretion is advised.  
206-3489-O  
P AGE 4 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guest Parental Control Menu  
After you have read the preceding page, follow instructions below to set up and activate Parental Control  
CHANNEL PREVIEW  
CONTENT BLOCK  
DIALOG  
LANGUAGE  
Parental Control  
5
9
20  
32  
44  
66  
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
MPAA RATING  
TV-MA  
SEX SCENES  
VIOLENCE  
TO BLOCK  
F VIOLENCE  
NO CONTENT  
VIDEO  
Note: The lodge decides if the Parental Control feature will be available to the guest. If available, Parental Control will  
appear as an option in the CH (CHANNEL) PREVIEW menu.  
Press CH PREVIEW.  
1
2
3
Press CC to go to PARENTAL CONTROL menus.  
Use CHANNEL Up/ Down to highlight an option like CONTENT  
BLOCK.  
4
5
Use VOLUME Up/ Down to go to the CONTENT BLOCK menu.  
2
Use CHANNEL Up/ Down to highlight an option like SEX  
SCENES.  
3/ 5  
4/ 6  
1
4
7
0
2
5
8
3
6
6
Use VOLUME Up/ Down to choose: Unblocked, TV-PG AND  
ABOVE, TV-14 AND ABOVE, or TV-MA. (AND ABOVE means  
more restrictive headings are automatically included when  
you choose a low restriction setting like TV-PG.) See the Mini  
Glossary, Ratings Charts on this and the previous page for  
rating meanings.  
9
ENTER  
8
1
After you have selected and adjusted the parental control  
menu options to your preferences:  
- Set the number of hours Parental Control will be on.  
- Set a 4-number password.  
7
8
TIMER  
ALARM  
CHPREVIEW  
- Set the Lock On/ Off option to either on or off.  
Press ENTER to remove menu.  
Note: some broadcasts do not contain rating information.  
Mini glossary  
TV PARENTAL GUIDELINE RATING SYSTEM  
TV-G  
General Audience  
Considered suitable for all audiences; children may watch unattended.  
TV-PG  
TV-14  
TV-MA  
Parental Guidance Suggested  
Parents Strongly Cautioned  
Mature Audience Only  
Unsuitable for younger children, may contain: Suggestive Dialog, Bad Language, Sex, and Violence Scenes.  
Unsuitable for children under 14, may contain: Strong Dialog, Bad Language, Sex, and Violence Scenes.  
Adults only, may contain: Strong Dialog, Bad Language, Sex, and Violence Scenes.  
CHILDREN’S CLASSIFICATIONS  
TV-Y  
Children  
Considered suitable for all children under 7 years old.  
TV-Y7  
Children 7 and over  
Considered suitable for children over 7, may contain Fantasy Violence Scenes.  
P AGE 4 2  
206-3489-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menus & On-Screen Displays  
Press the remote keys indicated below to access these menus and displays  
CH 9  
3:12 PM  
STEREO  
Alarm Menu  
Channel/ Time/ Audio Display  
Press ENTER. Shows currently  
selected channel or source, current  
time if the clock has been set, and  
incoming audio signal.  
Sleep Timer Menu  
Press ALARM. Sets the time the  
wake up alarm will sound. Use  
number keypad and TIMER to set  
AM/ PM.  
Press TIMER. Press repeatedly to set  
the Sleep Timer. Shows remaining  
time before TV shutoff.  
CH PREV  
5
9
20  
32  
44  
66  
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
CAPTIONS  
VOLUME  
PRESS CC  
CH  
TO SELECT, ENTER TO QU  
FOR PARENTAL CONTROL  
CC  
Volume Display  
Ch Preview Menu  
Closed Captions Menu  
Press VOLUME. Shows currently  
selected sound setting.  
Press CH PREVIEW. Displays list of  
the available TV Channels, Guest  
Parental Control menu (if active),  
and Video Channel access. Press  
CHANNEL Up/ Down to select a  
channel, or menu, then ENTER to go  
to the channel or menu.  
Press CC. Shows Caption/ Text  
options: Off, Caption 1, 2, 3, 4, or  
Text 1, 2, 3, 4.  
P AGE 4 3  
206-3489-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zenith ConciergeTM Direct-View TV Receiver Warranty  
Direct-View Color TV  
Welcome to the Zenith family! We believe that you will be pleased with your new Zenith TV. Please read this warranty carefully, it is a  
“LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from  
state to state within the U.S.A.  
ZENITH RESPONSIBILITY  
Service Labor  
During a period of 1 year from effective warranty date, Zenith will provide service labor by a Zenith authorized service center when needed, as  
determined by the Zenith service center, as a result of manufacturing defects.  
Parts  
New or remanufactured replacements for factory-defective parts will be supplied by a Zenith authorized service center for one year from effective war-  
ranty date (color picture tube — two years). Such replacement parts are warranted for the remaining portion of the original warranty period.  
In-Lodge Service  
Not Covered  
Warranty service for 21” diagonal (U.S.A.) or larger screen size models is provided in the lodge in most cases. (Some repairs may require the unit to be  
taken by the servicer to the repair facility and returned, at no additional charge.)  
This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls, installation or repair of antenna systems,  
cable converters or cable company-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other causes  
beyond the control of Zenith. Any alteration of the product voids this warranty in its entirety.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ZENITH SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCIDEN-  
TAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN CONNECTION WITH THIS PRODUCT. SOME STATES DO NOT ALLOW LIMI-  
TATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE  
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.  
OWNER’S RESPONSIBILITY  
Effective Warranty Date  
Warranty begins on the date of the installation of the Commercial Products Direct View Television Receiver. For your convenience, keep the dealer’s  
dated bill of sale or delivery ticket as evidence of the purchase date.  
Operating Guide  
Carry-In Service  
Read the Operating Guide carefully so that you will understand the operation of the TV and how to adjust the controls.  
Models under 21” diagonal (U.S.A.) screen size must be taken to a Zenith authorized service center for warranty service and must be picked up by the  
owner.  
Antenna  
Reception problems caused by inadequate antennas or faulty antenna connections are the owner’s responsibility.  
Important  
Product Registration—Please fill out and mail the Product Registration Card. It is imperative that Zenith know how to reach you promptly if we should  
discover a safety problem that could affect you.  
For warranty service information, contact any Zenith authorized service center.  
Warranty Service  
Parts and service labor that are Zenith’s responsibility  
(see above) will be provided without charge. Other service is at the owner’s expense. If you have any problem in obtaining satisfactory warranty ser-  
vice, call or write the Zenith Response Center. You must provide the model number, serial number and date of purchase or date of original installation.  
Before you ask for warranty service, read “Maintenance And Troubleshooting” in the operating guide. You might avoid a service call.  
ZENITH ELECTRONICS CORPORATION  
Zenith Response Center  
ZENITH CONSUMER SERVICES FACTORY OWNED SERVICE CENTERS  
201 James Record Rd., Building 3  
Huntsville, AL 35824  
Telephone (256) 772-1515  
Mon-Fri, 7:00 a.m.-8:00 p.m. CST  
Sat, 8:00 a.m.-5:00 p.m. CST  
www.zenith.com  
801 E. Roosevelt Rd.  
Lombard, IL 60148  
Telephone (630) 705-2830  
201 James Record Rd.  
Building 4  
Huntsville, AL 35824  
Telephone (256) 774-4025  
Service Hours:  
Home & Carry-in Service  
Television/ VCR  
Parts and Accessories  
PTV/ Camcorders  
M-F 8-6, Sat 9-2  
Will accept UPS shipments  
Additional Zenith Picture Tube Protection Plan Available  
Zenith offers you the opportunity to obtain additional long-term protection against failure of the picture tube in your new television. Our Picture Tube  
Protection Plan enables you to avoid any unexpected picture tube repair expenses and keep your television in top condition. It guarantees you a genuine  
Zenith replacement picture tube and service from a Zenith authorized service center.  
Be sure to send in the Product Registration Card. We will send you an application for the Protection Plan near the expiration of the  
two-year manufacturer’s warranty on the picture tube. For additional information call (256) 774-4088.  
B-CONCIERGE 12/ 98  
206-3489  
Issue-A  
© Copyright 1999 Zenith Electronics Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Western Digital DVR 4CH TRIPLEX User Manual
Western Telematic Network Card SRM 100 User Manual
Whirlpool Cooktop SCS3617RQ04 User Manual
Whirlpool Cooktop W10526085A User Manual
Whirlpool Microwave Oven YMT8066SE User Manual
Whynter Scale KS 1200 User Manual
Winegard TV Converter Box RCDT09A User Manual
Woodstock Cordless Drill D3206 User Manual
Xerox Printer 4050 IPS User Manual
Yamaha Musical Instrument CONCERT MARIMBAS User Manual