Installation and Operating Guide | Warranty
Model Numbers | Z52DC2D/Z56DC1D/Z62DC1D | DLP PROJECTION
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR
Partner LGE U.S.A., Inc.
has determined that this
product meets the ENER-
GY STAR guidelines for
energy drriciency.
© Copyright 2006, LG Electronics USA, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or
sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara-
tus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The
important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be includ-
ed where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding
statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illus-
trates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction :
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-
fiers)that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
PORTABLE CART WARNING
Owner’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
15. CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that
is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of
this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
16. Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.
17. Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
R
R
High-definition television. High-resolution
TruSurround XT
is a trademark of SRS Labs,
digital television broadcast and playback
system composed of roughly a million or
more pixels, 16:9 aspect-ratio screens,
and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i
and 720p resolutions.
TruSurround XT
Inc.
TruSurround XT technology is incorpo-
rated under license from SRS Labs,
Inc.
Manufactured under license from
Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of
Dolby Laboratories.
HDMITM, the HDMI logo and High-
Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI
Licensing."
4
DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4
Audio Menu Options
Audio Language . . . . . . . . . . . . . . . . . . . . . . . .32
Auto Volume Leveler (EZ SoundRite) . . . . . . . .32
Auto Sound Control (EZ Sound) . . . . . . . . . . . .32
Manual Sound Control (EZ sound-User Option) .33
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
TV Speakers On/Off Setup . . . . . . . . . . . . . . . .34
Time Menu Options
Introduction
Controls/Connection Options . . . . . . . . . . . . . .6~9
Remote Control Key Functions . . . . . . . . . 11~12
Installation
External Equipment Connections . . . . . . . . . .13~18
Antenna Connection . . . . . . . . . . . . . . . . . . . . .13
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .14
External A/V Source Setup . . . . . . . . . . . . . . . .15
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HDSTB Setup . . . . . . . . . . . . . . . . . . . . . . . . .16
AV Out Setup . . . . . . . . . . . . . . . . . . . . . . . . . .16
Digital Audio Output . . . . . . . . . . . . . . . . . . . . .17
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . .18~20
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .35
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .35
On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .36
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Option Menu Features
Aspect Ratio Control . . . . . . . . . . . . . . . . . . . . .38
Caption / Text . . . . . . . . . . . . . . . . . . . . . . . . . .39
Caption Option . . . . . . . . . . . . . . . . . . . . . . . .40
Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Lock Menu Options
Operation
Turning the TV On . . . . . . . . . . . . . . . . . . . . . . . .21
TV Setup
Parental Lock Setup . . . . . . . . . . . . . . . . . . . . .42
On-screen Menus Language Selection . . . . . . .22
Channel Selection . . . . . . . . . . . . . . . . . . . . . . .22
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . .22
Setup Menu Options
Split Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
EPG (Electronic Program Guide) (In DTV mode) . . .43
Brief Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
EZ Scan (Channel Search) . . . . . . . . . . . . . . . .23
Manual Scan . . . . . . . . . . . . . . . . . . . . . . . . . .23
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DTV Signal . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Input Source Selection . . . . . . . . . . . . . . . . . . .25
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Video Menu Options
Programming the Remote . . . . . . . . . . . . . . . . . . . . . .45
Programming Codes . . . . . . . . . . . . . . . . . . . . . . .46~48
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . .49~50
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . .51
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Auto Picture Control (EZ Picture) . . . . . . . . . . .26
Adaptive Picture Mode (APM) . . . . . . . . . . . . . .26
Color Temperature Control . . . . . . . . . . . . .27~28
XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Advanced-Cinema 3:2 Mode / Black Level . . . .30
Video Reset . . . . . . . . . . . . . . . . . . . . . . . . . . .31
After reading this manual, keep it handy for future reference.
Owner’s Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
- This is a representation of the front panel of models Z56DC1D, Z62DC1D series TVs.
- Here shown may be somewhat different from your TV.
Front Panel Controls
ENTER
INPUT
MENU
VOL
CH
CHANNEL (E, D) Buttons
POWER Button
ENTER Button
Operation Indicator/
Lamp Indicator/
Temperature Indicator
INPUT Button
VOLUME (F,G) Buttons
MENU Button
Function Status Indicators
- Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the-
operating status of the DLP projection TV.
Off
Power Cord is not connected.
Red
Green
Orange (blinking)
Orange
Power Cord is connected, TV is in standby mode.
TV turns on.
Operation Indicator
Lamp Indicator
Preparing operation in standby mode.
Projection lamp is reaching the end of its life and needs to
be replaced with a new lamp. Contact your service center.
There is a problem with the lamp or around it. Contact an
authorized service center.
Red (blinking)
Green (blinking)
Orange
The lamp cover is not closed.
The projection TV is overheating. Check the blocked vents
of the Projection TV .
Red
The projection TV shuts down due to overheating.
Temperature Indicator
Red (blinking)
The projection TV shuts down, check the cooling fan.
Contact your service center.
6
DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
- This is the back panel of models Z56DC1D, Z62DC1D series TVs.
Back Connection Panel
ANTENNA
COMPONENT IN
2
1
R
G
B
I
N
A
V
I
N
1
A
V
O
U
T
Y
VIDEO
RGB
(PC/DTV)
V
I
D
E
O
P
B
(L)
AUDIO
(R)
MONO
PR
D
I
G
I
T
A
L
A
U
D
I
O
O
P
T
I
C
A
L
O
U
T
P
U
T
(L)
(L)
S-VIDEO
AUDIO
AUDIO
(R)
RGBDVI
(R)
HDMI
/DVI IN
SERVICE ONLY
CABLE IN
ANTENNA
IN
AV IN 1
AC IN
CABLE
IN
ANTENNA
IN
AC IN
COMPONENT IN
1
2
RGB IN
AV IN 1
AV OUT
VIDEO
AV OUT
Y
RGB
(PC/DTV)
VIDEO PB
COMPONENT
IN 1/2
(L)
AUDIO
(R)
MONO
PR
DIGITAL AUDIO
OPTICAL OUT
(L)
(L)
S-VIDEO
DIGITAL AUDIO
OPTICAL OUT
AUDIO
RGB/DVI
AUDIO
(R)
(R)
HDMI
/DVI IN
HDMI/DVI
IN
SERVICE
ONLY
SERVICE ONLY
RGB(PC/DTV)
VIDEO IN
RGB/DVI
AUDIO IN
Operating Guide 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
- This is a representation of the front panel of models Z52DC2D series TVs.
- Here shown may be somewhat different from your TV.
Front Panel Controls
INPUT
MENU
VOL
CH
POWER Button
CHANNEL (E, D) Buttons
INPUT/ENTER
Button
Operation Indicator/
Lamp Indicator/
Temperature Indicator
MENU Button
VOLUME (F,G) Buttons
Function Status Indicators
- Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the-
operating status of the DLP projection TV.
Off
Power Cord is not connected.
Red
Green
Orange (blinking)
Orange
Power Cord is connected, TV is in standby mode.
TV turns on.
Operation Indicator
Lamp Indicator
Preparing operation in standby mode.
Projection lamp is reaching the end of its life and needs to
be replaced with a new lamp. Contact your service center.
There is a problem with the lamp or around it. Contact an
authorized service center.
Red (blinking)
Green (blinking)
Orange
The lamp cover is not closed.
The projection TV is overheating. Check the blocked vents
of the Projection TV .
Red
The projection TV shuts down due to overheating.
Temperature Indicator
Red (blinking)
The projection TV shuts down, check the cooling fan.
Contact your service center.
8
DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
- This is the back panel of models Z52DC2D series TVs.
Back Connection Panel
CABLE IN
ANTENNA
IN
AV IN 1
AC IN
CABLE
IN
ANTENNA
IN
AC IN
COMPONENT IN
1
2
RGB IN
AV IN 1
AV OUT
VIDEO
AV OUT
Y
RGB
(PC/DTV)
VIDEO PB
COMPONENT
IN 1/2
(L)
AUDIO
(R)
MONO
PR
DIGITAL AUDIO
OPTICAL OUT
(L)
(L)
S-VIDEO
DIGITAL AUDIO
OPTICAL OUT
AUDIO
RGB/DVI
AUDIO
(R)
(R)
HDMI
/DVI IN
HDMI/DVI
IN
SERVICE
ONLY
SERVICE ONLY
RGB(PC/DTV)
VIDEO IN
RGB/DVI
AUDIO IN
Owner’s Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Connection Panel
There are four jacks on the left side on your projection TV
that make connecting Audio/Video devices like video
games and camcorders very simple.
Z52DC2D
Z56DC1D, Z62DC1D
The jacks are like those found on the back jack connec-
tion panel. This means that most equipment that connects
to those types of jacks on the rear jackpack, may be con-
nect-ed to the front connection panel.
To use the side jacks as the signal source, select them
using Main Input menu as described on page 25. They
will be named “AV 2” in the Main Input menu.
If you input both AV 2 and S-
Video, only the S-Video will work.
If you’re connecting a video game
device, make sure to change the
picture settings with the EZ
Picture option in the Video menu
(see page 24).
AV IN 2
LEFT/RIGHT
AUDIO
Used for stereo
sound from vari-
ous types of
equipment.
/
VIDEO
AV IN 2
Connects the
video signals
from any piece of
equipment.
S-VIDEO
A connection available
on some very high-end
equipment that pro-
vides better picture
quality than video input.
Mini glossary
A/V CABLESAudio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are
used for stereo playback of videocassettes and for higher quality picture and sound from other A/V devices.
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).
10 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Key Functions
- When using the Remote Control, aim it at the remote control sensor on the TV.
MODE
Select the remote oper ting mode: TV,
VCR, Cable, DVD and SatelliteSelect
other operating modes, for theremote
to control external devices.
INDICATOR LIGHTS
Show active remote mode
every time any button is
pressed.
VCR CABLE DVD SAT
TV
MODE
LIGHT
POWER
LIGHT
Illuminates the Remote
Control keys.
INPUT
TV INPUT
TIMER
INFO
INPUT
Selects: Antenna, Cable, AV1, AV2,
Component1-2, RGB and HDMI/DVI
input sources.
RGB-PC
HDMI/DVI
1
4
7
2
5
8
0
3
6
9
INFO
When you watch the TV, information dis-
plays on top of the screen.
NUMBER KEYPAD
For direct channel selection and
programming functions.
FLASHBK
FAV
MUTE
Switches the sound on or off.(Refer to
p.22)
FAV
MUTE
SAP
Scrolls the Favorite channels.
+
ADJUST
EZ PIC
ADJUST
VOL
CH
-
Adjusts screen position, size, and phase
in RGB-DTV/PC or HDMI-PC mode.
VOLUME UP/DOWN
Increases/decreases the sound level.
EZ SOUND SRS
APM
GUIDE
Shows program schedule.
RATIO
Changes the screen format or aspect
ratio.
CC
FREEZE
GUIDE
RATIO
ENTER
ENTER
When in the menu system and other
on-screen displays, selects highlighted
options.
MENU
Brings up the main menu to the
screen.
MENU
EXIT
EXIT
Clears all on-screen displays and returns
to TV viewing from any menu.
SKIP
Playing CDs: Selects songs.
Playing DVDs: Selects movie chapters.
Owner’s Manual 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Key Functions
POWER
Turns your TV or any other programmed
equipment on or off, depending on mode.
RGB-PC
Selects the RGB-PC input mode.
In other input sources, change to theRGB-
PC mode.
VCR CABLE DVD SAT
TV
TV INPUT
MODE
LIGHT
POWER
Rotates the input mode between Antenna
and Cable.
AV1-2, Component 1-2, RGB-DTV (or
RGB-PC) and HDMI/DVI input sources, TV
will return to the last TV channel.
INPUT
TV INPUT
TIMER
INFO
RGB-PC
HDMI/DVI
TIMER
Lets you select the amount of time-
before your TV turns itself off auto-
matically.
HDMI/DVI
1
4
7
2
5
8
0
3
6
9
FLASHBK
Tunes to the last channel viewed.
SAP
Selects MTS sound: Mono, Stereo, and
SAP in Analog mode. Change the audio
language in DTV mode.
FLASHBK
CHANNEL UP/DOWN
Scrolls through available channels in
EZ Scan memory.
FAV
MUTE
SAP
+
EZ SOUND
Selects the sound appropriate for the
program's character.
ADJUST
EZ PIC
VOL
CH
-
EZ PIC
Adjusts the factory preset picture
depending on the viewing environ-
ment.
EZ SOUND SRS
APM
SRS
Selects the sound appropriate for the
select the desired sound (Off,
3DEchoSound System or SRS
TruSurround XT)in Front Surround
function.
CC
FREEZE
GUIDE
RATIO
APM(ADAPTIVE PICTURE MODE)
Concurrently, compare with the
Daylight,Normal, Night Time and User1
on the screen.
ENTER
CC
Selects a closed caption mode for dis-
playing captioning information if avail-
able on program.
FREEZE
Freezes the currently-viewed picture.
MENU
EXIT
THUMBSTICK
Allows you to navigate the on-screen
menus and to adjust the system settings
RECORD, PAUSE, REW, FFWD,
PLAY, STOP
and preferences, by moving to an option
Control the functions on your VCR.
D
withF
G
and selecting the highlighted
option with
E
.
Installing Batteries
• Open the battery compartment cover on the back side and install the batteries
matching correct polarity (+ with +, - with -).
• Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones.
Close cover.
back of
remote
12 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
1. Analog and Digital TV signals provided on antenna
- Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
ANTENNA
IN
Bronze Wire
RF Coaxial Wire (75 ohm)
VHF Antenna
Turn clockwise to tighten.
UHF Antenna
Bronze Wire
Outdoor
Antenna
Be careful not to bend the bronze wire when
connecting the antenna.
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
2. Analog and Digital TV signals provided on cable
Cable TV Wall
Jack
RF Coaxial Wire (75 ohm)
CABLE
IN
Bronze Wire
Owner’s Manual 13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Analog and Digital TV signals provided on cable and antenna
Antenna
Bronze Wire
RF Coaxial Wire (75 ohm)
CABLE
IN
ANTENNA
IN
Turn clockwise to tighten.
Cable TV Wall
Jack
RF Coaxial Wire (75 ohm)
Bronze Wire
• To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install properly.
• If the antenna needs to be split for two TV’s, install a “2-
Way Signal Splitter” in the connections.
ANTENNA
IN
• If the antenna is not installed properly, contact your deal-
er for assistance.
Signal
Amplifier
Note: The TV will let you know when the TV(analog antenna), DTV(digital antenna), CATV(analog cable) and CADTV(digital
cable) channel scans are complete.
VCR Setup
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune the
TV to the same channel number.
ANTENNA
IN
CABLE
IN
AC IN
COMPONENT IN
Connection Option 2
1
2
RGB IN
AV IN 1
AV OUT
1. Connect the audio and video cables from the VCR's output
jacks to the TV input jacks, as shown in the figure.
When connecting the TV to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you connect an S-VIDEO output from VCR to the S-VIDEO
input, the picture quality is improved; compared to connecting
only the Video input.
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3. Select the input source with using the INPUT button on the
remote control. Note that this TV finds the connected input
sources automatically for AV 1-2 and Component 1-2.
Y
VIDEO
RGB
(PC/DTV)
VIDEO PB
(L)
AUDIO
(R)
MONO
PR
DIGITAL AUDIO
OPTICAL OUT
(L)
(L)
S-VIDEO
AUDIO
RGB/DVI
AUDIO
(R)
(R)
HDMI
/DVI IN
ONLY
SERVICE 1
2
VCR Rear
Do not connect to both AV1-2 and S-Video at the
same time. In the event that you connect both AV and
the S-Video cables, only the S-Video will work.
ANT O
S-VIDEO
OUT
IN
ANT IN
VIDEO (R) AUDIO (L)
OUTPUT
SWITCH
3
4
14 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
AV IN 1
AV OUT
Camcorder
VIDEO
(L)
AUDIO
(R)
MONO
Video Game
Set
How to use
DIGITAL AUDIO
OPTICAL OUT
1. Select the input source by using the INPUT button on the
Remote Control. Note that this TV finds the connected input
sources automatically for AV 1-2 and Component 1-2. It is
presumed that RGB and HDMI/DVI sources are
connected.
S-VIDEO
AUDIO
VIDEO
R
L
HDMI
/DVI IN
2. Operate the corresponding external equipment.
DVD Setup
How to connect
1. Connect the DVD video outputs (Y, PB, PR) to the COMPO-
NENT (Y, PB, PR) INPUT jacks on the TV and connect the
DVD audio outputs to the AUDIO INPUT jacks on the TV, as
shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio out-
puts to the AUDIO INPUT jacks on the TV, as shown in the fig-
ure.
ANTENNA
G-LINK
DIGITAL AUDIO
OPTICAL OUT
SERVICE
ONLY
RGB IN(PC/DTV)
C
a
b
l
DIGITAL AUDIO
OPTICAL IN
1
XGA/
480p/
720p/
1080i
(COMPONENT2)
e
CABLE
S-VIDEO
DIGITAL AUDIO
OPTICAL IN
(DVI)
2
C
A
R
D
COMPONENT IN
2
1
AV AV IN
2
AV IN
1
AUDIO IN(RGB/DVI)
Note: If your DVD player does not have component video output,
use S-Video.
VIDEO
(L)
AUDIO
(R)
Y
(L)
MONO)
IEEE-1394 IN
PB
AUDIO
(R)
HDMI IN
(DVI)
1
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT button on the remote control to select
Component 1 or Component 2. (If connected to S-VIDEO,
select the AV1 or AV2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
PR
VARIABLE
AUDIO OUT
(L)
(L)
AUDIO
(R)
HDMI IN
2
AUDIO
(R)
• Component Input ports
To get better picture quality, connect a DVD player to the
component input ports as shown below.
or
DIGITAL AUDIO
OPTICAL
(R) AUDIO (L)
B
R
(R) AUDIO (L)
S-VIDEO
DVD
Component ports
Y
PB
PR
on the TV
Pr
R-Y
Cr
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Video output ports
on DVD player
PR
Owner’s Manual 15
Download from Www.Somanuals.com. All Manuals Search And Download.
HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital
signals from a digital set-top box or other digital external device, refer to the figure as shown below.
- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
How to connect
Use the TV’s COMPONENT (Y, PB, PR) INPUT, RGB, HDMI/DVI jack for
video connections, depending on your set-top box connector. Then, make
the corresponding audio connections.
Note: HDMI(High Definition Multimedia Interface): Input that accepts uncom-
Signal Component 1/2
RGB-DTV,HDMI/DVI
pressed digital signal and multi channel digital audio signal.
480i
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
480p
720p
1080i
How to use
1. Turn on the digital set-top box. (Refer to the owner’s manual for the digital
set-top box.)
2. Use INPUT on the Remote Control to select Component 1, Component
2, RGB-DTV or HDMI/DVI source.
AV Out Setup
The TV has a special signal output capability which allows you to
hook up a second TV or monitor.
AV IN 1
AV OUT
Connect the second TV or monitor to the TV’s AV OUT. See the
Operating Manual of the second TV or monitor for further details
regarding that device’s input settings.
VIDEO
(L)
AUDIO
(R)
MONO
Note
DIGITAL AUDIO
OPTICAL OUT
S-VIDEO
• Component, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sources
cannot be used for AV out.
S-VIDEO
IN
(R) AUDIO (L)
VIDEO
HDMI
/DVI IN
16 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Audio Output
Send the TV’s audio to external audio equipment (stereo system) via
the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital Audio
(Optical) Out port.
2. Connect the other end of the optical cable to the digital audio (opti-
cal) input on the audio equipment.
3. Set the “ TV Speaker option - Off” in the AUDIO menu. Refer to
page 33.
See the external audio equipment instruction manual for operation.
AV IN 1
AV OUT
C
A
B
L
E
C
A
R
D
VIDEO
(L)
AUDIO
(R)
MONO
DIGITAL AUDIO
OPTICAL OUT
S-VIDEO
DVI
HDMI
/DVI IN
HDMI
Caution: Do not look into the optical output port. Looking
at the laser beam may damage your vision.
Owner’s Manual 17
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
- The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic
card accordingly.
When supporting RGB
How to connect
1. Connect the PC to RGB INPUT port of this TV with a RGB
cable.
COMPONENT IN
1
2
RGB IN
2. If the PC(or the sound card of the PC) has an analog audio
out-put connector, connect the PC's audio output to AUDIO
INPUT port located on the right side of RGB INPUT port.
Y
RGB
(PC/DTV)
VIDEO PB
PR
How to use
(L)
(L)
AUDIO
RGB/DVI
AUDIO
(R)
1. To get the best picture quality, adjust the PC graphics card
to 1024x768, 60 Hz.
(R)
2. Select RGB-PC input source in main input option of SETUP
menu.
Once you select RGB-PC in main input option of SETUP
menu, INPUT button is also available for this purpose.
SERVICE ONLY
RGB-PC OUTPUT
AUDIO
When supporting DVI
How to connect
1. Connect the PC to HDMI/DVI port of this TV with an HDMI-
to-DVI cable(not supplied with this product).
2. If the PC(or the sound card of the PC) has an analog audio
output connector, connect the PC's audio output to AUDIO
INPUT port located on the right side of RGB INPUT port.
How To Use
RGB IN
AV IN 1
AV OUT
VIDEO
RGB
(PC/DTV)
(L)
AUDIO
(R)
MONO
DIGITAL AUDIO
OPTICAL OUT
(L)
S-VIDEO
AUDIO
RGB/DVI
(R)
1. To get the best picture quality, adjust the PC graphics card to
1024x768, 60Hz.
HDMI
/DVI IN
2. Select HDMI/DVI input source in main input option of SETUP
menu.
INPUT button is also available for this purpose.
DVI-PC OUTPUT
AUDIO
- Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or bright
ness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to anoth-
er rate, adjust Phase Calibration using the ADJUST button or adjust the brightness and contrast on the VIDEO menu
until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card
or consult the manufacturer of the PC graphic card.
18 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
- In case HDMI/DVI Source Devices is not connected
Cable or poor cable connection, "No signal" OSD
dis-play in HDMI/DVI Input. In case that Video
Resolution is not supported TV SET output in
HDMI/DVI Source Devices, "Invalid Format" OSD
display. Refer to the Manual of HDMI/DVI Source
Devices or contact your service center.
- Depending on the graphics card, DOS mode may
not work if a HDMI1 to DVI Cable is in use.
- When Source Devices connected with HDMI/DVI
Input, output PC Resolution(VGA, SVGA, XGA),
Position and Size may not fit to Screen. As shown
the picture below, press the ADJUST button to
adjust the screen Position of TV SET and contact
an PC graphics card service center.
- When Source Devices connected with HDMI/DVI
Input, output TV SET Resolution(480p, 720p,
1080i) and TV SET Display fit EIA/CEA-861-B
Specification to Screen.
If not, refer to the Manual of HDMI/DVI Source
Devices or contact your service center.
Monitor Display Specifications (RGB-PC or HDMI/DVI Mode)
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
Resolution
RGB-PC
Mode Only
31.468
31.469
37.861
70.09
59.94
72.80
640x350
640x480
800x600
1024x768
37.500
35.156
75.00
56.25
60.31
72.18
75.00
60.00
70.06
75.02
37.879
48.077
46.875
48.363
56.476
60.023
Owner’s Manual 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Setup for PC mode
Operation
• When RGB connect to PC input and select the RGB-PC in Main Input, this function is used.
• In RGB-PC mode, POSITION, SIZE, PHASE, RESET is available.
• In RGB-DTV mode, SIZE, PHASE is not available.
• In HDMI/DVI mode, POSITION, SIZE, RESET is available (When PC format is inputted) or any function is not
available (When DTV format is inputted).
Adjustment for screen Position, Size, Phase, Reset
•After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
- Display PC Adjust Menu using ADJUST button.
- Position : Adjust the screen position. After displaying the Adjust, select the screen position.
- Size
: Adjust the screen size.
- Phase : Adjust the phase of Pixel clock.
- Reset
: Initializating Size, Position, Phase adjustment .
POSITION
SIZE
POSITION
SIZE
POSITION G
SIZE
G
D
E
D
E
D
E
F
G
F
G
F
G
PHASE
RESET
PHASE
RESET
PHASE
RESET
Adjust Close
Adjust Previous
Move
Adjust Close
POSITION
SIZE
POSITION
SIZE
POSITION
SIZE
Initialize Settings
D
E
Phase 0
F
G
PHASE
RESET
F
G
PHASE
RESET
Yes
No
PHASE
RESET
FG
Adjust Previous
Move
Select
Adjust Previous
FG Control
Adjust Previous
Size
20 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Turning the TV On
* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an
example to help you with the TV operation.
Turning on the TV just after installation
1. Connect power cord correctly. At this moment, the TV is switched to standby mode.
2. Press the POWER or CH (D E) buttons on the TV front panel or press the POWER, INPUT, TV INPUT,
/
CH (+ / -) or Number (0 ~ 9) buttons on the Remote Control to turn the TV on.
Turning on the TV (power cord is still connected)
1. If the TV is off without indicators on the TV
• Check the power cable.
2. If the TV was turned off with the remote control and the POWER button on the TV
• Press the POWER button on the TV or press the POWER, INPUT, TV INPUT, CH (+ / -) or Number
(0 ~ 9) button on the Remote Control to turn the TV on.
Notes: If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Owner’s Manual 21
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup
On-screen Menus Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
English
Language
G
Español (Spanish)
Français (French)
Low Power
Low Power
1. Press the MENU button and then use D
button to select the OPTION menu.
E
/
2. Press the G button and then use D
button to select Language.
E
/
3. Press the G button and then use D E button to select your desired language.
/
From this point on, the on-screen menus will be shown in the selected language.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Channel Selection
Press the CH (+ / -) or NUMBER buttons to select a channel number.
Note: When you selects the Scramble channel and then moves, the channel is automatically deleted.
To watch the Scramble channel, you must buy the separate cable box and apply for the subscription to the
cable broadcating station.
Volume Adjustment
1. Press the VOL (+ / -) button to adjust the volume.
2. If you want to switch the sound off, press the MUTE button.
3. You can cancel this function by pressing the MUTE or VOL (+ / -) button.
22 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu Options
EZ Scan (Channel Search)
- Automatically finds all available channels through antenna or cable inputs, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection changes.
EZ Scan
EZ Scan
G
Manual Scan
Channel Edit
DTV Signal
Input
Manual Scan
Channel Edit
DTV Signal
Input
Selection ( or
leads you to the EZ
scan screen.
)
G
Input Label
Input Label
Processing EZ scan...
ANTENNA Ch.20
0 channel(s) found
Press
to stop the
current scan and start
DIGITAL ANTENNA
channel scan.
Next
MENU Previous
1. Press the MENU button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select EZ Scan.
3. Press the G button or ENTER button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for TV, DTV, CATV, and CADTV.
Manual Scan
- A password is required to gain access to Manual Scan menu if the Lock System is turned on.
EZ Scan
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input
Manual Scan
Channel Edit
DTV Signal
Input
Select channel type and
RF-channel number.
G
D
E
TV
2
G
TV 2-0
Input Label
Input Label
Press
channel
to delete the
1. Press the MENU button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select Manual Scan.
3. Press the G button and then use D / E button to select TV/CADTV/CATV/DTV.
4. Press the G button and then use D / E button to select channel number you want to add or delete.
5. Press the ENTER button to add or delete for the channel number.
6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Edit
Create two different types of channel lists in memory: “Custom List” and “Favorite List” from the default channel list cre-
ated from the EZ Scan channel search.
A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List
are displayed in black color, and the channels deleted from the Custom List are displayed in gray color. Once a channel
is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen.You
can create your own Favorite List.
Use the FAV button on the remote control when a channel is highlighted and then you can add or delete the channel
to/from the Favorite List.
EZ Scan
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input
Manual Scan
Channel Edit
DTV Signal
Input
Selection ( or
you to the channel edit
screen.
) leads
G
G
Input Label
Input Label
1. Press the MENU button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select Channel Edit.
3. Press the G button. You will now see a screen filled with channel numbers and a preview picture.
4. Use D / E / F / G button to select a channel and then use the ENTER button to add or delete it. Press FAV button to
add the channel to the Favorite List.
5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Note: When you selects the Scramble channel and then moves, the channel is automatically deleted.
To watch the Scramble channel, you must buy the separate cable box and apply for the subscription to the
cable broadcating station.
DTV Signal
This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital
cable input. The higher the signal strength, the less likely you are to experience picture degradation.
DTV Signal: This function is only available when the input signal is DTV or CADTV.
EZ Scan
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input
Manual Scan
Channel Edit
DTV Signal
Input
Bad
Normal
Good
Input Label
Input Label
1. Press the MENU button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select DTV Signal.
3. View the on-screen signal strength monitor to see the quality of the signal being received.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
24 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Source Selection
Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices
that are connected to your TV.
EZ Scan
Antenna
Cable
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input
Manual Scan
Channel Edit
DTV Signal
Input
AV1
AV2
Component1
Component2
RGB-PC
G
Input Label
Input Label
HDMI/DVI
1. Press the MENU button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select Input .
3. Press the G button and then use D / E button to select the source: Antenna, Cable, AV1, AV2,
Component1, Component2, RGB-DTV (or RGB-PC) or HDMI/DVI.
5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Input Label
Sets a label to each input source which is in use when you press INPUT button.
EZ Scan
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input
Manual Scan
Channel Edit
DTV Signal
Input
AV1
Cable Box
AV2
VCR
Component1
DVD
Input Label
Component2 Set Top Box
Input Label
G
RGB
PC
HDMI/DVI
Game
1. Press the MENU button and then use D / E button to select the SETUP menu.
2. Press the G button and then use D / E button to select Input Label.
3. Press the G button and then use
button to select the source: AV1, AV2, Component1, Component2, RGB or
/ E
D
HDMI/DVI.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Menu Options
Auto Picture Control (EZ Picture)
EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the
program category.
Daylight, Normal, Night Time settings are preset for optimum picture quality at the factory and are not adjustable.
In the User 1, and User 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
1. Press the EZ Video button repeatedly to select the picture appearance setup option as shown below:
Daylight, Normal, Night Time, User 1 and User 2(your own settings).
• You can also use the VIDEO menu to adjust EZ Picture.
2. Press the EXIT button to save and return to TV viewing .
Audio Language
Allows you to select your preferred picture mode after compairing the four different picture (Daylight , Normal ,
Night Time , User 1 and User 2) settings.
Daylight
Normal
1. Press the APM button at once.As shown below,the screen is
divided to 4-split.
2. Use the D / E / F / G button to navigate 4 EZ Pictures.
Night Time
User 1
By pressing the ENTER button,you can select the desired mode.
Navigate
Select
EXIT Exit
Note: While operating the 4-split, any button except APM, ENTER, EXIT, VOLUME D or E , MUTE or D / E / F / G
button on the remote control are not usable.
26 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temperature Control
Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as
red, or set to cool to see less intense colors with more blue.
EZ Picture
Color Temperature
XD
EZ Picture
Color Temperature
XD
Cool
G
Medium
Warm
User
Advanced
Video Reset
Advanced
Video Reset
1. Press the MENU button and then use D / E button to select the VIDEO menu.
2. Press the G button and then use D / E button to select Color Temperature .
3. Press the G button and then use D / E button to select either Cool, Medium, Warm or User .
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Menu Options
Manual Color Temperature Control
You can also adjust the detailed settings(Red, Green, Blue) by selecting the User menu.
EZ Picture
EZ Picture
Color Temperature
XD
Cool
Color Temperature
XD
Medium
Warm
User
Advanced
Video Reset
Advanced
Video Reset
G
Selection ( or
) leads you
G
to the detailed setting
screen.
User
Red
0
Red
0
0
0
G
E
Green
Blue
Press
to confirm.
MENU
1. Press the MENU button and then use D / E button to select the VIDEO menu.
2. Press the G button and then use D / E button to select Color Temperature .
3. Press the G button and then use D / E button to select User .
4. Press the G button and then use D / E button to select Red, Green or Blue .
5. Press the G button and then use F / G button to make appropriate adjustments.
• The adjustment range of Red, Green or Blue is -20~ +20.
6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
28 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
XD
XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced
dig-ital signal processing algorithm.
When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically change to Auto.
When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual and when select-
ing Manual, you can adjust the XD Contrast, XD color and XD Noise.
EZ Picture
Color Temperature
XD
EZ Picture
Color Temperature
XD
G
Manual
Advanced
Video Reset
Advanced
Video Reset
XD Contrast On
XD Color
XD Noise
On
On
1. Press the MENU button and then use D / E button to select the VIDEO menu.
2. Press the G button and then use D / E button to select XD.
3. Press the G button and then use D / E button to select Auto or Manual.
* Selecting the Manual
1. Press the G button and then use F / G button to select XD
Contrast, XD Color or XD Noise.
XD Contrast :Optimizing the contrast automatically according to the
brightness of the reflection.
XD Color :Adjusting the colors of the reflection automatically to repro-
duce as closely as possible to the natural colors.
XD Noise :Removing the noise up to the point where it does not dam-
age the original picture.
2. Use the D / E button to make appropriate adjustments.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced-Cinema 3:2 Mode / Black Level
• Cinema 3:2 Mode
- Set up the TV for the best picture appearance for viewing movies.
When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode),the TV will
adjust 24 fps video from movies to 30 fps video for display (This function is only available
in Analog,AV1,AV2,Component 480i mode.)
• Black level
- Adjusting the contrast and the brightness of the screen using the black level of the screen.
This feature operates only in HDMI/DVI or AV1, AV2 mode.
EZ Picture
Color Temperature
XD
EZ Picture
Color Temperature
XD
Cinema 3:2 Mode Off
Black Level Auto
Advanced
Video Reset
Advanced
Video Reset
G
1. Press the MENU button and then use D / E button to select the VIDEO menu.
2. Press the G button and then use D / E button to select Advanced .
3. Press the G button and then use D / E button to select Cinema 3:2 Mode or Black Level.
* Selecting the Cinema 3:2 Mode
* Selecting the Black Level
4. Press the G button and then use D / E
button to select On or Off .
4. Press the G button and then use D / E
button to select Auto, Low or High.
Auto
Realizing the black level of the screen and
set it to High or Low automatically.
Low
The reflection of the screen gets darker.
High
The reflection of the screen gets brighter.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
30 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Reset
Use to quickly reset all the Video menu options to their original factory preset values.
EZ Picture
Color Temperature
XD
EZ Picture
Color Temperature
XD
Advanced
Video Reset
Advanced
Video Reset
Selection ( or
to the factory settings
(default).
) resets
G
G
1. Press the MENU button and then use D / E button to select the VIDEO menu.
2. Press the G button and then use D / E button to select Video Reset.
3. Press the G button to reset the Video menu options to original values.
Owner’s Manual 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Menu Options
Audio Language
Other languages may be available if a digital signal is provided by the broadcasting station.
Audio Language
EZ SoundRite
EZ Sound
Audio Language
EZ SoundRite
EZ Sound
G
English
Spanish
French
Balance
Balance
TV Speaker
TV Speaker
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select Audio Language.
3. Press the G button and then use D / E button to select: English, Spanish, or French.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Auto Volume Leveler (EZ SoundRite)
Scans for changes in sound level during commercials, then adjusts the sound to match the specified
audio level. SoundRite makes sure that the volume level remains consistent whether you are watching a
commer-cial or a regular TV program.
Audio Language
EZ SoundRite
EZ Sound
Audio Language
EZ SoundRite
EZ Sound
Off
On
G
Balance
Balance
TV Speaker
TV Speaker
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select EZ SoundRite.
3. Press the G button and then use D / E button to select On or Off .
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
32 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Sound Control (EZ Sound)
EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the
appropriate sound options based on the program content.
Normal,Stadium,News,Music and Theater are preset for good sound quality at the factory and are not
adjustable.
1. Press the EZ Sound button repeatedly to select the appropriate sound setup as shown below :
Normal , Stadum , News , Music , Theater and User (your own settings) .
• You can also adjust EZ Sound in the AUDIO menu.
2. Press EXIT button to save and return to TV viewing.
Manual Sound Control ( EZ Sound -User option )
Adjust the sound to suit your taste and room situations.
Audio Language
EZ SoundRite
EZ Sound
Balance
Normal
Stadium
News
Treble
50
50
G
Bass
Music
Front Surround
Off
Theater
User
TV Speaker
BBE
G
Selection ( or
) leads you
G
to the detailed setting
screen.
Press
to confirm.
MENU
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select EZ Sound.
3. Press the G button and then use D / E button to select User.
4. Press the G button and then use D / E button to select the desired sound option (Treble, Bass or Front Surround).
5. Press the G button and then use F / G button to make appropriate adjustments.
* Selecting the Front Surround
Press the G button and then use F / G button to select
front Surround
3D EchoSound System
(
Off, 3D EchoSound System or SRS Sound Retrieval
System)TruSurround XT .
6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
SRS TruSurround XT
Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity,
bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from
standard stereo material.
3D EchoSound System
Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a
very wide and deep sound stage.
Owner’s Manual 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Balance
Adjust the left/right sound of speaker to suit your taste and room situations.
Audio Language
EZ SoundRite
EZ Sound
Audio Language
EZ SoundRite
EZ Sound
Balance
L
R
Balance
0
TV Speaker
TV Speaker
1. Press the MENU button and then use
the AUDIO menu.
button to select
button to select
D
/ E
2. Press the G button and then use
D
/ E
Balance.
L
R
Balance
0
3. Press the G button and then use F / G button to make appro-
priate adjustments.
4. Press EXIT button to return to TV viewing or press MENU but-
ton to return to the previous menu.
TV Speaker On/Off Setup
Turn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off.
Audio Language
Audio Language
EZ SoundRite
EZ SoundRite
EZ Sound
Balance
EZ Sound
Balance
TV Speaker
G
Off
On
TV Speaker
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select TV Speaker.
3. Press the G button and then use D / E button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
34 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Menu Options
Auto Clock Setup
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually, if the current time is set incorrectly by the auto clock function through Digital
Channel Service problem.
Auto Clock
Manual Clock
Off Timer
Auto Clock
Manual Clock
Off Timer
G
Off
On
Time Zone
Eastern
Auto
On Timer
On Timer
Daylight
Saving
Sleep Timer
Auto Off
Sleep Timer
Auto Off
1. Press the MENU button and then use D / E button to select the TIME menu.
2. Press the G button and then use D / E button to select Auto Clock .
3. Press the G button and then use D / E button to select On.
4. Press the G button and then use D / E button to select your viewing area time zone: Eastern , Central ,
Mountain , Pacific , Alaska , or Hawaii .
5. Press the G button and then use D / E button to set Daylight Saving Auto , Off or On , depending on
whether or not your viewing area observes Daylight Savings Time.
6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Manual Clock Setup
If current time setting is wrong, reset the clock manually.
Auto Clock
Manual Clock
Off Timer
Auto Clock
Manual Clock
Off Timer
Year
- - - -
G
Date - -
Time - -
/
:
- -
- - - -
On Timer
On Timer
Sleep Timer
Auto Off
Sleep Timer
Auto Off
1. Press the MENU button and then use D / E button to select the TIME menu.
2. Press the G button and then use D / E button to select Manual Clock .
3. Press the G button and then use F / G button to select either the year, date, or time option. Once
selected, use the D / E button to set the year, date, and time options.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 35
Download from Www.Somanuals.com. All Manuals Search And Download.
On/Off Timer Setup
Timer function operates only if current time has been set.
Off-Timer function overrides On-Timer function if they are both set to the same time.
The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV
will automatically revert to standby mode.
Auto Clock
Manual Clock
Off Timer
Auto Clock
Manual Clock
Off Timer
Off
On
On Timer
On Timer
G
Sleep Timer
Auto Off
Sleep Timer
Auto Off
Time
Ch.
Vol
6
:
30 AM
TV 2-0
17
1. Press the MENU button and then use D / E button to select the TIME menu.
2. Press the G button and then use D / E button to select Off Timer or On Timer .
3. Press the G button and then use D / E button to select On .
• To cancel On / Off Timer function, select Off .
4. Press the G button and then use D / E button to set the hour.
5. Press the G button and then use D / E button to set the minutes.
6. For only On Timer function
Press the G button and then use D / E button to select the channel at turn-on.
Press the G button and then use D / E button to set the sound level at turn-on.
7. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Sleep Timer
The Sleep Timer turns the TV off after a preset amount of time. Note that this setting is cleared when
the TV is turned off.
• You can also set up the Sleep Timer in the TIME menu.
1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen,
followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to
count down from the number of minutes selected.
3. To check the remaining minutes before the TV turns off, press the TIMER button once.
4. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off .
36 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Off
If set to on and there is no input signal, the TV turns off automatically after 10 minutes.
Auto Clock
Manual Clock
Off Timer
Auto Clock
Manual Clock
Off Timer
TV will be automatically turned
off, in case of No Signal for
10 minutes.
On Timer
On Timer
Sleep Timer
Auto Off
Sleep Timer
Auto Off
G
Off
On
1. Press the MENU button and then use D / E button to select the TIME menu.
2. Press the G button and then use D / E button to select Auto Off.
3. Press the G button and then use D / E button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu Features
Aspect Ratio Control
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV,you need to specify the pic
ture is to be displayed.
RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
1. Press the RATIO button repeatedly to select the desired picture format.
• You can also adjust the Aspect Ratio in the OPTION menu.
Set by program
Selects the proper picture proportion to match the
Zoom 1
source’s image.
Choose Zoom 1 when you want to view the picture with-
out any alteration. However, the top and bottom portions
of the picture will be cropped.
(4:3 4:3)
(16:9 16:9)
Set By Program
Set By Program
Zoom 1
4:3
Choose 4:3 when you want to view a picture with an origi-
nal 4:3 aspect ratio.
Zoom 2
Choose Zoom 2 when you want the picture to be altered,
both vertically extended and cropped. The picture taking a
halfway trade off between alteration and screen coverage.
4:3
16:9
Adjust the picture horizontally, in a linear proportion to fill
the entire screen.
Zoom 2
Cinema Zoom
Choose Cinema Zoom when you want to enlarge the pic-
ture in correct proportion. Note: When enlarging or reduc-
ing the picture, the image may become distorted.
16:9
Horizon
The screen size is, more enlarged at both sides, to create
a spectacular view.
Cinema Zoom
D1
Horizon
I
The adjustment range is 1-16.
38 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Caption/Text
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a program.
Analog caption displays information at any position on the screen usually the program's dialog.
Text displays information, usually at the bottom position and is used for a data service, generally not program related.
Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
This TV is programmed to remember the caption/text mode it was last set to, when you turn the power off.
1. Use the CC button repeatedly to select Caption Off, CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4.
2. Press EXIT button to save and return to TV viewing.
• You can also use the OPTION menu to select Caption/Text.
Aspect Ratio
Caption/Text
Caption Option
Language
Off
Aspect Ratio
Caption/Text
Caption Option
Language
CC 1
G
CC 2
CC 3
CC 4
Low Power
Low Power
Text 1
Text 2
Text 3
Text 4
1. Press the MENU button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Caption/Text.
3. Press the G button and then use D / E button to select caption: Off, CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4.
• CAPTION
The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the
hearing impaired.
• TEXT
The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the
broadcaster.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Digital Broadcasting System Captions
Choose the language you want the DTV/CADTV Captions to appear in.
Languages can be chosen for digital sources only if they are included on the program.
Aspect Ratio
Caption/Text
Caption Option
Language
Off
Aspect Ratio
Caption/Text
Caption Option
Language
English
Spanish
French
G
Low Power
Low Power
1. Press the MENU button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Caption/Text.
3. Press the G button and then use D / E button to select available caption languages: English, Spanish, or French, Text4.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Owner’s Manual 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Caption Option
Customize the DTV/CADTV captions that appear on your screen.
Aspect Ratio
Caption/Text
Caption Option
Language
Aspect Ratio
Caption/Text
Caption Option
Language
Style
Custom
Size
A Standard
G
Font
Font
0
Text Color
Text Opacity
Bg Color
Bg Opacity
Edge Type
Edge Color
White
Low Power
Low Power
Solid
Black
Solid
None
Black
1. Press the MENU button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Caption Option.
3. Press the G button and then use D / E button to select Custom.
4. Use D / E button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use
it to see the caption language.
• Size: Set the size the words will appear in.
• Font: Select a typeface for the words.
• Text Color: Choose a color for the text.
• Text Opacity: Specify the opacity for the text color.
• Bg (Background) Color: Select a background color.
• Bg (Background) Opacity: Select the opacity for the background color.
• Edge Type: Select an edge type.
• Edge Color: Select a color for the edges.
5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Low Power
Low power reduces the plasma display power consumption.
Aspect Ratio
Caption/Text
Caption Option
Language
Aspect Ratio
Caption/Text
Caption Option
Language
Off
On
Low Power
Low Power
G
1. Press the MENU button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Low Power.
3. Press the G button and then use D / E button to select On or Off.
• When you select On, the screen darkens.
4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
40 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock Menu Options
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The
default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen
to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV
Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating
System (MPAA) only.
Ratings for Movies previously shown in theaters:
Movie Ratings :
• Blocking Off
(Permits all programs)
• G
(General audience)
• PG
• PG-13
• R
(Parental guidance suggested)
(Parents strongly cautioned)
(Restricted)
• NC-17
• X
(No one 17 and under admitted)
(Adult only)
If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including made-for-TV movies :
• TV-G
(General audience)
• TV-PG
• TV-14
• TV-MA
• TV-Y
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
(All children)
• TV-Y7
(Children 7 years older)
TV Rating-Children:
• Age
• Fantasy Violence
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
TV Rating-General:
• Age (applies to TV-G, TV-PG, TV-14, TV-MA)
• Dialogue- sexual dialogue (applies to TV-PG, TV-14)
• Language- adult language (applies to TV-PG, TV-14, TV-MA)
• Sex- sexual situations (applies to TV-PG, TV-14, TV-MA)
• Violence (applies to TV-PG, TV-14, TV-MA)
Input Block
• AV1, 2, (On, Off)
• Component 1, 2 (On, Off)
• RGB or HDMI/DVI (On, Off)
Owner’s Manual 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Lock Setup
Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.
Lock System
Lock System
Off
On
G
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Input Block
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Input Block
1. Press the MENU button and then use D / E button to select the LOCK menu. Then, press the G
button.
• Enter the password as requested.
• The TV is set up with the initial password “0-0-0-0”.
2. Use the D / E button to choose from the following Lock Menu options. Once the option is select
ed, change the settings to your preference.
• Lock System: Activates or disables the blocking scheme you set up previously.
• Set Password: Change the password by inputting a new password twice.
• Block Channel: Select a channel number that you wish to block.
• Movie Rating (MPPA): Blocks movies according to the movie ratings limits specified, so children
cannot view certain movies. You can set the ratings limit by blocking out all the movies with the
ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies
shown on TV, not TV programs, such as soap operas.
• TV Rating-Children: Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs. Unless you block cer-
tain TV programs intended for mature audiences in the TV Rating - sub menu, your children can
view those programs.
• TV Rating-General: Based on the ratings, blocks certain TV programs that you and your family do
not want to view.
• Input block: Enables you to select a source to block from the external source devices you have
hooked up.
3. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Note: If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’ on the remote control.
42 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Split Zoom (DTV 720p, or 1080i mode only)
- Enlarges the picture with correct proportions.
- When enlarging the picture, the image may become distorted.
1. Press the FREEZE button in DTV 720p, or 1080i modes.
2. Use the D / E / F / G buttons to select the screen split zoom section.
3. To return to normal viewing, press the FREEZE button again.
EPG (Electronic Program Guide) (In DTV mode)
- This system has an Electronic Program Guide (EPG) to help your navigate through all the possible view-
ing options.
- The EPG supplies information such as program listings, start and end times for all available services.
- This function can be used only when the EPG information is broadcasted by broadcasting companies.
- The EPG displays the program description for next 3 days.
- This function is only supported in DTV mode.
1. Press the GUIDE button to switch on EPG.
2. Press the D / E / F / G button to select desired program, then press the ENTER button to display the select-
ed program.
3. Press the GUIDE or EXIT button again to switch off EPG and return to TV viewing.
Remote Control Buttons
Function
F / G
Select the desired program
Change to the selected channel
Jump Page
D
E
/
/
FF GG
/
IFF GGI
Change the date
/
GUIDE/EXIT
Switch off EPG
Owner’s Manual 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Brief Info.
Function : • Show the present screen information.
• On Watching with the upper Input signal,
press the INFO button.
• Press the INFO button or EXIT button to
exit.
4 : 3
Screen Ratio of Input Signal 4:3
Screen Ratio of Input Signal 16:9
16 : 9
.
480i
480p
720p
Resolution of Input Signal 720x480i
Resolution of Input Signal 720x480p
Resolution of Input Signal 1280x720p
Resolution of Input Signal 1920x1080i
A: Banner information
B: Program title
C: Day, Month, Year
D: Program start time
1080i
E: Program finish time
F: Show the prosessing rate
G: Present time
H: Added information. Refer to the icon
explanation.
Multilingual : Input Signal have over two Audio infor-
mation. Press the SAP button to select wanted Audio.
Caption: Input Signal have over one Close service.
Press the CC button to select wanted Closed caption.
CC
Input Signal has rating information . Refer to the
<Lock Menu>.
D (Dialogue), L (Language), S (Sex), V (Violence), FV
(Fantasy Violence)
G
B
A
D
E
C
F
TV 6-0
3:11AM
Live Eden 1080I
MONO
STEREO
SAP
Sat, Dec 20, 2003
7:00PM
9:00PM
CNBC
Caption
CC
Multilingual
1080i
16 : 9
H
44 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Remote
The Remote Control for your HD receiver is a multi-brand or universal Remote Control that can
be programmed to operate most remote-controllable devices of other manufacturers.
Note: The Remote Control may not be able to control all models of other brands.
1. Test your Remote Control.
To find out whether your remote control can operate the device
VCR CABLE DVD SAT
with out programming, turn on the device such as a the VCR
and press the corresponding mode button (VCR) on the remote
control while pointing at the device. Test the POWER and
CH +/- buttons to see if the device responds properly. If not, the
remote requires programming to operate the device.
TV
MODE
LIGHT
POWER
3
2
4
INPUT
TV INPUT
TIMER
INFO
RGB-PC
HDMI/DVI
2. Turn on the device to be programmed. Then press the cor
responding mode button on the Remote Control.
1
4
7
2
5
8
0
3
6
9
3. Press the POWER button and the MUTE button simulta
neously. Now the Remote Control is ready to program the
code for the corresponding device.
4. There are two ways to find the right code for the device.
FLASHBK
A. If you press the CH +/- buttons repeatedly, the codes will
change one at a time. Press the POWER button after each
code change. If the right code is found, the device will turn off.
FAV
MUTE
SAP
+
3
ADJUST
EZ PIC
VOL
CH
-
4
5
B. Enter a code number using the number buttons on the Remote
Control. The right code numbers for the corresponding compo-
nent can be found on the following pages.
EZ SOUND SRS
APM
Again, if the code is correct, the device will turn off.
CC
FREEZE
GUIDE
RATIO
5. Press the EXIT button to store the program.
6. Test the Remote Control functions to see if the device
responds properly. If not, repeat from step 2.
ENTER
MENU
EXIT
Owner’s Manual 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes
TVs
Brand
Codes
Brand
Codes
Brand
Codes
Brand
Codes
A MARK
ADMIRAL
AKAI
112 143
072 081 161
006 146
073 167
052
GOLDSTAR
004 102 106
110 112 113
116 119 122
019 024 040 Sharp
004 014 019
022 028 029
081 143 170
175
056 130 132
134
AMPRO
AMSTRAD
ANAM
127 137 143 NIKEI
043
HALL MARK
004 116
ONKING
043
SIEMENS
088
043 054 056 HITACHI
080 104 108
004 006 009 ONWA
010 011 012 OPTONICA
023 041 075 PANASONIC
143 158 163
043
SIGNATURE
SONY
072
019 081
034 056 080
092 164
041 070 079
085 126 139
147 185
112 115 118
121 131
AOC
004 006 058
166
PHILCO
003 004 006 SOUNDESIGN
024 043 056
003 004 028
043 116
112
INFINITY
INKEL
164
BLAUPUNKT 088
CANDLE
129
059 060 063 SPECTRICON 112
064 127 143 SSS
002 003 004 JBL
164
004 043
006
JCPENNY
004 006 008
164
SUPRE MACY
002
CAPEHART
CETRONIC
CITIZEN
058
009 024 030 PHILIPS
003 004 005 SYLVANIA
006 038 059
003 004 006
044 059 060
063 064 116
127 140 160
164
043
065 101 143
002 003 004
006 043 101 JENSEN
156 160
070 093 143
013
160 164
103 143
043
JVC
034 038 070 PIONEER
006 018 023
CLASSIC
CONCERTO
CONTEC
083 145
043
025 027 116 TANDY
081
004
KEC
135 176
004 143
TATUNG
056 062
039 043 050 KENWOOD
006 070
002 059
143
PORTLAND
PROSCAN
TECHNICS
034 080 084
004
051
KLOSS
KMC
144 160 161 TECHWOOD
CORONADO
CRAIG
143
165 167
TEKNIKA
002 003 004
006 024 028
031 043 072
077 101 103
143
043 054
043 143
KTV
006 043 143 PROTON
004 058 116
131 143 171
173
CROWN
154
255
CURTIS MATHES
004 006 101 LG
116 143
043
LODGENET
LOGIK
072
072
004
QUASAR
034 056 092
CXC
RADIO SHACK
019 043 047 TELEFUNKEN037 046 086
DAEWOO
004 016 017 LUXMAN
043 044 055 LXI
071 076 103
116 127 143
087
007 015 052 RCA
081 160 164
004 006 023 TELERENT
024 056 065 TERA
074 144 152 TMK
156 160 161 TOSHIBA
165
072
172
107 111 114
166
004 116
007 015 030
040 051 062
101 138
143
117 120 123 MAGNAVOX
125 127 128
003 004 006
022 059 060
136 143
061 063 064 REALISTIC
127 143 160
007 019 043
DAYTRON
004 116 143
047
TOTEVISION
UNIVERSAL
DYNASTY
043
164 ROCTEC
006 077 164 RUNCO
186
008 009
146
DYNATECH
ELECTROHOME
EMERSON
062
MARANTZ
168 169
VIDEO CONCEPTS
024 077 143 MATSUI
004 005 006 MEMOREX
028 043 047
164
SAMPO
004 006 058 VIDIKRON
116 VIDTECH
174
004 007 072
116
004 116
004 008 009
019 028 060
061 063 064
072 074 116
143 164
004 006
004 116
043
SAMSUNG
004 050 089 WARDS
101 105 113
048 050 051 METZ
096 116 143 MGA
151 153 154
088
004 006 024
028 042 049
077 116
088
116 127 133
137 143 160
155
SANYO
007 020 021
FISHER
FUNAI
007 057
MINERVA
033 039 053 YAMAHA
YORK
028 043
MITSUBISHI004 006 024
028 040 042
109 116 124
146
FUTURETECH
GE
043
057 082 166
004 028 043
048 116 143
SCOTT
YUPITERU
ZENITH
004 006 008
009 034 056
001 072 073
095 103 157
112
SEARS
073 074 091 MTC
116 130 144
004 006 062 004 007 015
ZONDA
101
028 030 057
082 094 101
155 160 161 NAD
015 025
165
NEC
006 007 016 116 143 160
46 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
BSR
Codes
123
050
051 126 129
053
053
Brand
Codes
Brand
Codes
117
071
Brand
Codes
115
128 146
001 081 082
083 084 091
120
GENERAL INSTRUMENT 003 004 016 PERSONAL CABLE
029 031 059 PHILIPS
VIEWSTAR
WINEGARD
ZENITH
101
139 140
033 037 039 PRIMESTAR
051 057 104 PROSAT
PICO
PRESIDENT
105
HITACHI
HOUSTON TRACKER
019 102
030 110 111
072
CAPETRONICS
CHANNEL MASTER
013 014 015
018 036 055 HUGHES
008 009 012 HYTEK
068
053
060 147
061
108
RCA
REALISTIC
SAMSUNG
SATELLITE SERVICE CO 028 035 047
057 085
SCIENTIFIC ATLANTA 032 138
066 106
043 074
123
CHAPARRAL
077
JANIEL
CITOH
CURTIS MATHES
DRAKE
054
050 145
JERROLD
KATHREIN
005 006 007 LEGEND
010 011 052 LG
057
255
SONY
103
112 116 141 LUTRON
024 046 056 LUXOR
132
062 144
010 059 063 TEECOM
064 065
057
STARCAST
SUPER GUIDE
041
DX ANTENNA
ECHOSTAR
020 124 125
023 026 075
087 088 090
107 130 137
002 127
016 025 042
043 044 045
048 049 078
079 080 086
101 135 136
076
MACOM
038 040 057
058 093 094 MEMOREX
095 096 097 NEXTWAVE
098 099 100 NORSAT
028 124 125 TOSHIBA
069 070
UNIDEN
122
PACE SKY SATELLITE 143
ELECTRO HOME
EUROPLUS
FUJITSU
089
114
PANASONIC
PANSAT
060 142
121
017 021 022
027 133 134
Audio
Brand
APEX DIGITAL
DENON
GE
GOLDSTAR
HARMAN KARDON
JVC
LG
Codes
022
020 014
005 006
010 016 025 MITSUBISHI
027
012
Brand
Codes
025
013
024
002
023
008 017
003 009
Brand
Codes
013
004 026
021
005 006
005 006
011 015
007
Brand
Codes
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005 006
019 008
009 018
010 016 025
MAGNAVOX
MARANTZ
NAD
ONKYO
SAMSUNG
SONY
001 010 016 PANASONIC
Owner’s Manual 47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Brand
APEX DIGITAL
DENON
GE
GOLDSTAR
HARMAN KARDON
JVC
LG
Codes
022
020 014
005 006
010 016 025 MITSUBISHI
027
012
Brand
Codes
025
013
024
002
023
008 017
003 009
Brand
Codes
013
004 026
021
005 006
005 006
011 015
007
Brand
Codes
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005 006
019 008
009 018
010 016 025
MAGNAVOX
MARANTZ
NAD
ONKYO
SAMSUNG
SONY
001 010 016 PANASONIC
48 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Checklist
• Check whether the TV is turned on.
• Is the power cord inserted into wall power outlet?
; Is the power cord connected to the TV set properly?
No picture &
No sound
• Test the wall power outlet, plug another product’s power cord into the outlet
where the TV’s power cord was plugged in.
• Press the VOLUME (D E) button.
/
Picture OK &
No sound
• Sound muted? Press MUTE button.
• Check to see if there is any object between the TV and the remote control
causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.12)
The remote control
doesn’t work
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries. (Refer to p.12)
• This is normal, the image is muted during the TV startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Picture appears slowly
after switching on
• Select Color in the Picture menu and press the G button.
(Refer to p.26)
No or poor color
or poor picture
• Keep a sufficient distance between the TV and the VCR.
• Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
• Check for local interference such as an electrical appliance or power tool.
Owner’s Manual 49
Download from Www.Somanuals.com. All Manuals Search And Download.
No output from one of
the speakers
• Adjust Balance in the AUDIO menu. (Refer to p.34)
Unusual sound from
inside the TV
• A change in ambient humidity or temperature may result in the unit turning off
and does not indicate a fault with the TV.
Poor TV input
signal
• Check ANTENNA and CABLE connection.
• Check ANTENNA and CABLE connection.
Poor Video
signal
No channel or a few
channel
• Start EZ Scan.
Unsuitable
Aspect Ratio
• You can adjust the RATIO button or Aspect Ratio in the OPTION menu.
50 DLP Projection TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the
screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
Product Specifications
Z62DC1D
MODELS
Z56DC1D
Z52DC2D
63.3
40.1
19.5
98.1
58.1
36.8
17.2
87.1
47.5
33.8
15.6
68.0
Horizontal Size (inches)
Height (inches)
Depth (inches)
Weight (lbs.)
AC120V ~ 60Hz
Power requirement
Television System
Program Coverage
Power Consumption (W)
Antenna
NTSC-M, ATSC, 64 & 256 QAM
VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69
210W
75 ohm External Terminal for VHF/UHF
15Wx2
Audio Output (W)
Supplied Accessories
Remote Control, 2 size AA batteries, D-sub 15 pin Cable, Power Cord
•
The specifications shown above may be changed without prior notice for quality improvement.
Owner’s Manual 51
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENITH ELECTRONICS CORPORATION
DLP Projection TV Limited Warranty - USA
Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or
workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective
from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is
good only to the original purchaser of the product and effective only when used in the United States,
excluding U.S. Territories.
HOW SERVICE IS HANDLED:
WARRANTY PERIOD:
In-Home Service: Please retain dealer’s dated bill of
LABOR: One Year from the Date of Purchase.
sale or delivery ticket as evidence of the Date of
Purchase for proof of warranty, and submit a copy of the
bill of sale to the service person at the time warranty ser-
vice is provided.
Parts: One Year from the Date of Purchase.
Halogen Bulb: One Year from the Date of Purchase.
Parts replaced are warranted for the remaining por-
*
tion of the original warranty period.
Please call 1-877-9Zenith (1-877-993-6484) to
locate your nearest Zenith Authorized Service
Center.
Replacement parts may be new or factory remanufac-
tured.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-
ING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW,
IT IS LIMITED IN DURATION TO THE EXPRESSED WARRANTY PERIOD ABOVE. ZENITH
WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNI-
TIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAM-
AGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, LOST OR COR-
RUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CON-
TRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental
or consequential damages or limitation on how long an implied warranty lasts, so the above exclu-
sion or limitation may not apply to you. This warranty gives you specific legal rights and you may also
have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
1. Damages or operating problems that result from shipping, installation, adjustment of user con-
trols, calibration, maintenance or failure to maintain, or separate system components; and
2. Damages or operating problems that result from normal wear and tear, misuse, abuse, operation out-
side environmental specifications or contrary to the requirements or precautions in the Operating Guide,
accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electri-
cal current or voltage, reception problem caused by inadequate home antenna or faulty antenna con-
nections, computer software, institutional or commercial use, or other causes not arising out of defect in
material or workmanship.
3. Therefore, the cost of repair or replacement of such a defective product shall be borne by the con-
sumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
Call 1-877-9Zenith (1-877-993-6484) (24 hours a day, 365
For nearest Authorized Service
days per year) and select an appropriate option from the
Center, Where to buy, Product
menu.
Assistance, or Customer Assistance
LG Customer Interactive Center
201 James Record Road
Huntsville, Alabama 35824
a
P/N: 38289U0570A
Download from Www.Somanuals.com. All Manuals Search And Download.
|