ZENIT-TTL
User manual, 1965 year
Zenit TTL
This text is identical to the one in the User manual, English version, 1965 year.
1. Purpose and Advantages
ZENIT-TTL camera is intended for taking amateur pictures on black-and-white color films.
The camera is provided with a semi-automatic exposure meter operating through the lens (TTL) a
self-timer and is synchronized for flash lamp operation. It accepts interchangeable lenses provided,
with mounting thread of M42x1 and back focal distance of 45.5 mm.
ZENIT-TTL can be used for special kinds of photography such as reproduction works with the help
of extension tubes, taking close-up pictures of small subjects at close distance (macrophotography),
taking pictures with the help of a microscope (microphotography) and so on.
ZENIT-TTL camera has the following advantages:
•
semi-automatic TTL exposure meter provides for correct exposure setting when taking pictures
with the standard lens as well as with interchangeable lenses and extension tubes;
•
instant return mirror ensures continuous viewing of a subject before and after exposure;
high speed lens is provided with a pre-set diaphragm mechanism which automatically closes
•
the diaphragm at the moment of the shutter operation (“A” mode); manual operation of the diaphragm
is provided as well (“M” mode);
•
fully open diaphragm ensures maximum brightness of the image seen in the viewfinder; this
fact is very important at the moment of viewing and focusing;
•
focusing can be done both by a microraster or a ground glass;
speedy exposure setting, the system of simplified film loading, rewinding of exposed film with
•
the shutter disengaging bush in locked position — all these features cut down the time necessary for
preparing the camera for operation.
2. Specifications
Frame size — 24x36 mm
Film used — 35 mm, perforated
Length of film in cassette — 1,65 m
Number of frames — 36
Shutter speeds — from 1/30 to 1/500 s, “B” (by hand) and long exposure time
Standard lens — HELIOS-44M:
focal length — 58 mm
maximum relative aperture — f/2
diaphragm scale — from 2 to 16
distance scale — from 0,55 to “∞”
Exposure meter supply — from one battery of Mallory “PX-13” type
Film speed range — from 16 to 500 GOST units
Lens mounting thread — M42x1
Light filter thread — M52x0,75
Tripod socket thread — 1/4ʺ
Viewfinder linear field of view — 20x28 mm
Overall dimentions without case — 138x100x93 mm
Mass — 1,01 kg
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENIT-TTL
User manual, 1965 year
13 — cassette chamber
14 — cassette spool guide
15 — cap of compartment for battery of Mallory PX-13 type
16 — viewfinder eyepiece
17 — accessory shoe for mounting flash lamp and other accessories
18 — lock latch
19 — folding back door
20 — take-up spool
21 — sprocket
22 — lens mounting ring
23 — diaphragm scale
24 — depth-of-field scale
25 — distance scale
26 — focusing ring
27 — diaphragm setting ring
28 — diaphragm mode selector switch
29 — diaphragm mechanism pusher
HELIOS-44M
4. Preparing for picture taking
4.1. Loading the camera
Put a battery of Mallory PX-13 type into the compartment in the way
indicated in Section “Changing the Power Source of Exposure Meter
Electric Circuit“.
Load the camera in faint diffused light in the following way:
a) pull lock latch 18 upwards and open back door 19;
b) lift crank 6 and pull out the rewind knob;
c) put a loaded cassette into chamber 13;
d) return the rewind knob to its initial position and fold crank 6;
e) pull out the film leader as long as to reach the camera edge and insert
it into the take-up spool 20 slot; in so doing be sure to engage a perforation
hole with a tooth of sprocket 21;
f) close the back door;
g) cock the shutter by turning lever 11 as far as it will go. Press release
button 3. As the shutter is cocked, the film is advanced by one frame. To
transport a nonexposed portion of film to the film gate, cock the shutter
two times pressing the release button after each cocking.
Should the film be wound tightly in the cassette, the film rewind knob
will rotate when the shutter is being cocked. If the film is loose in the
cassette, the rewind knob will fail to rotate at the first frames;
h) bring figure “0” of exposure counter dial 10 to the index mark. Set
the exposure counter only with the shutter cocked;
i) set the film speed value by turning dial 7 till it aligns with the index
mark on the camera shield; in so doing you will feel the dial is locked.
Note: Dashes engraved between figures on the film speed dial enable to set intermediate values of
film speed in accordance with the Reference Table.
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENIT-TTL
User manual, 1965 year
Reference table of film speed units
GOST 16
ASA 16 20
DIN 13
22
32
45
65
90
130
180
250
350
500
25 32 40
50 64 80
100 125 160
200 250 320
400 500
16
19
22
25
28
.
.
.
.
.
.
.
.
.
.
4.2. Shutter speed setting
Turn the shutter speed dial round its axis until a selected shutter
speed figure sets against the index mark. In so doing the dial will be
found in locked position. Figures on the shutter speed dial denote
corresponding fractions of a second and “B” indicates a hand-controlled
shutter speed. Shutter speeds can be set both with cocked and released
shutter. With the shutter speed dial set at “B” the shutter stays open as
long as the release button is kept depressed. To obtain a long exposure
turn the release button to the left as far as it will go. The exposure over,
return the button to its normal position by turning it as far as it will go in
the reverse direction. For long exposures and hand-controlled shutter
speeds one is recommended to use a cable release which can be screwed into the release button thread.
In so doing the camera should be mounted on a tripod.
4.3. Diaphragm setting
Set a selected diaphragm value against the index mark by turning
diaphragm setting ring 27.
The diaphragm is capable of operating in two modes:
— in automatic one (the selector switch in “A” position) turning of
diaphragm setting ring 27 does not result in lens diaphragming but
sets preliminarily the aperture value to which the diaphragm will close
down at the moment the release button is pressed;
— in manual one (the selector switch in “M” position) the lens
diaphragm is set manually by turning ring 27.
4.4. Focusing
In the camera viewfinder there is Fresnel lens 30 with microraster
centre spot 31 surrounded with ground glass circle 32. Watching the
subject being photographed turn focusing ring 26 to obtain the sharpest
image in the microraster or the ground glass circle. For this purpose
perform focusing with the diaphragm fully open. The best sharpness
can be obtained when the image appears distinct and without ripples
within the microraster.
The ground glass circle is mainly used for micro- and macrophotography as well as for taking
pictures with small apertures when microraster loses its sensitivity.
Focusing can be done as well without looking through the viewfinder. For this purpose turn
focusing ring 26 and making use of distance scale 25 set the value corresponding to the distance from
the subject being taken to the film against the large index mark of scale 24 (the small index mark
denoted by Latin letter “R” is used when taking pictures on some infra-red photographic material).
With the lens focused, one can determine the distance from the film to the near and far depth-of-
field limits by making use of scales 24 and 25.
For example, the lens is focused for 3 m and the aperture value, which is to be used, is that of “8”.
In such a case one can read by scale 25 against two figures “8” of scale 24 that the image will be
sharp within the distance limits from 2,3 m to 4,5 m.
With the lens focused and aperture value set one can visually determine approximate depth-of-field
limits in the following way:
— with the diaphragm operated in automatic mode, one should press release button 3 till a definite
stop and estimate the image sharpness within the ground glass circle in the viewfinder;
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENIT-TTL
User manual, 1965 year
— in manual mode one can estimate the image sharpness within the ground glass circle without
pressing the release button.
4.5. Exposure setting with the aid of the exposure meter
Semi-automatic exposure meter of your camera measures the
light getting into the camera through the lens (TTL system). As a
result you can set the exposure with the high degree of accuracy
depending upon the brightness of the subject and the speed of
photographic material by varying the shutter speed and aperture
value.
The system operates as
well with interchangeable
lenses,
light
filters,
supplementary lenses and extension tubes. Turn the film speed
setting dial and set the speed value of the film loaded in the
camera against the index mark on the camera shield. Set the
diaphragm mode selector switch in “A” mode.
Watching in the viewfinder eyepiece in such a way that the whole of its frame would be clearly
seen, press release button 3 till a definite stop but not till the shutter operation, should it be cocked.
With the release button depressed, the exposure is excessive if the needle deflects from the index
mark to sign “+” and insufficient if it deflects to sign “–”.
Keep the release button depressed and turn diaphragm setting ring 27 or shutter speed dial 8 till you
match the needle with the index mark. Should you fail to match the needle with the index mark with all
possible combinations of diaphragm and shutter speed values, you should either change the subject
illumination or use a film of a different speed.
5. Picture taking
5.1. Picture taking
Having prepared the camera for picture taking, cock the shutter, make sure of correct focusing and
exposure setting, and smoothly press release button 3 to take a picture.
Remember, that sharp pressure on the release button results in the
camera shaking at the moment of exposure and thus in blurring of the
picture.
5.2. Unloading the camera
When the exposure counter dial shows 36 shots, rewind the exposed
film into the cassette. To do this:
a) disengage the shutter by turning shutter disengaging bush 9 as far as
it will go in the direction of the arrow on the camera shield;
b) lift crank 6 and rotate the film rewind knob in the arrow direction
until the film leaves the take-up spool;
c) pull out the film rewind knob as far as it will go, open the back door,
and take the cassette out of the camera;
d) turn the shutter disengaging bush clockwise to return it into the
initial position.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENIT-TTL
User manual, 1965 year
6. Self-timer, synchro socket, lens changing, operating the self-timer
6.1. Operating with self-timer
To use the self-timer mount the camera on a tripod. Then do the following:
a) focus the lens;
b) set the exposure;
c) cock the shutter;
d) wind the self-timer mechanism by turning lever 1 downwards as far
as it will go;
e) change diaphragm selector switch 28 from “A” (Automatic) to “M”
(Manual) position;
f) press self-timer release button 2 and take your place in front of the
lens. The shutter will operate in no less than 7 seconds after pressing the
button.
6.2. Taking flash pictures
The camera shutter is synchronized for use with different types of
electronic flashes (X-synchronization). Before taking flash pictures
remove protective strip 12. To connect an electronic flash with the
camera, the latter is provided with socket 4 located on the front wall of
the camera. The camera design provides as well for cableless connection
of electronic flashes. The shutter speed of 1/30 s. only can be used for
flash photography.
6.3. Using interchangeable lenses and taking pictures at close distance
The camera accepts interchangeable lenses provided with M42x1 mounting thread and flange/film
distance of 45,5 mm.
If an interchangeable lens has no automatic diaphragm mechanism, the diaphragm can be handled
manually. When long focus lenses are used, a slight cutting
of the left or right edges of the image on negative is likely to
take place. With the help of a special stand the ZENIT-TTL
camera can be used for making reproductions of drawings,
manuscripts, photographs. When making reproduction
works, use should be made of extension tubes by setting
them between the camera body and the lens. To obtain a
necessary scale either one tube or a combination of some
tubes can be used.
The extension tubes without pushers being used, the lens
diaphragm should be operated manually and the diaphragm
mode selector switch should be set to “M” mode.
6.4. Changing the power source if exposure meter electric circuit
To change a Mallory PX-13 battery do the following: turn cap 15 in the counter-clockwise direction
as far as it will go without applying excessive effort and take out the exhausted battery; Put a new one
into the compartment with sign “ + ” outwards. Cap the compartment. In the closed position of the cap
its slot should be placed vertically.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENIT-TTL
User manual, 1965 year
6.5. Handling and care of the camera
The ZENIT-TTL camera is a precise optical mechanical
instrument. Handle the camera carefully, keep it clean and
protected from shocks, dust and sharp changes of temperature.
Keep the camera closed in its case. In so doing the lens should
be capped and the shutter and self-timer should be released. Do
not touch the optical details with hands since this is likely to
damage their coating. Clean the coated optical surfaces only from
outside with a clean soft piece of fabric or cotton wool slightly
moistened with rectified alcohol or ether. The mirror and Fresnel
lens may be cleaned only if absolutely necessary with a very soft
dry brush but in no case with humid cleaning agents.
Since the camera is a complex instrument, any repair and
corresponding adjustments should be performed only in repair
shops.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
|