Zenith DVD VCR Combo XBV342 User Manual

Installation and Operating Guide | Warranty

Model Number | XBV342 | DVD Player + Video Cassette Recorder

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.

AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-

dures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and oper-

ating instructions should be read before the product is

operated.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the product.

2. Keep these instructions. - The safety, operating and

use instructions should be retained for future refer-

ence.

11. Only use attachments/accessories specified by

the manufacturer.

3. Heed all warnings. - All warnings on the product and

in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this product near water. – For example:

near a bath tub, wash bowl, kitchen sink, laundry tub,

in a wet basement; or near a swimming pool; and

other areas located near water.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

apparatus. When a cart is used, use caution

when moving the cart/product combination to

avoid injury from tip-over.

6. Clean only with dry cloth. – Unplug this product from

the wall outlet before cleaning. Do not use liquid

cleaners.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over- heating. The open-

ings should never be blocked by placing the product

on a bed, sofa, rug or other similar surface. This prod-

uct should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is pro-

vided or the manufacturer’s instructions have been

adhered to.

13. Unplug this product during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the product has been

damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or

objects have fallen into the product, the product

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

8. Do not install near any heat sources such as radi-

ators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are pro-

vided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

ꢀ Still Picture and Frame-by-Frame Playback . 29

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Marker Search . . . . . . . . . . . . . . . . . . . . . . . 30

ꢀ Changing Video Mode . . . . . . . . . . . . . . . . . 30

Special DVD Features . . . . . . . . . . . . . . . . . . . . 30

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . 7

Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connections Panel . . . . . . . . . . . . . . . . . . . . . . . . 10

ꢀ

Checking the contents of DVD Video discs: Menus . 30

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 30

ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 30

ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 30

ꢀ Changing the Audio Language . . . . . . . . . . . 30

ꢀ Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Audio CD and MP3/WMA Disc Operation . . . . . . . 31

Playing Audio CDs and MP3/WMA Discs . . . . . . 31

MP3/WMA Recording Notes. . . . . . . . . . . . . . . . 31

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Moving to another Track . . . . . . . . . . . . . . . 32

ꢀ Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 32

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Changing the Audio Channel . . . . . . . . . . . . 32

JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . 33

Viewing a JPEG Files on a Disc. . . . . . . . . . . . . 33

ꢀ Selecting other JPEG Files . . . . . . . . . . . . . 33

ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 33

ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 33

ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 33

ꢀ Notes on JPEG Files . . . . . . . . . . . . . . . . . . 33

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 34

Programmed Playback with Audio CD and

Pre-operation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14

Connecting Antenna/Cable TV to DVD+VCR . . . 11

Basic TV Connections . . . . . . . . . . . . . . . . . . . . 12

Optional, Preferred TV Connections . . . . . . . 13-14

VCR Operation Setup . . . . . . . . . . . . . . . . . . . . 15-17

On-Screen Display (OSD) . . . . . . . . . . . . . . . . . 15

Setting the On-Screen Display . . . . . . . . . . . . . . 15

VCR Setup Menu Options . . . . . . . . . . . . . . . . . 16

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 16

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 17

DVD Operation Setup . . . . . . . . . . . . . . . . . . . . 18-21

General Explanation. . . . . . . . . . . . . . . . . . . . . . 18

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 18

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . 19-21

ꢀ General Operation . . . . . . . . . . . . . . . . . . . . 19

ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ Progressive Scan. . . . . . . . . . . . . . . . . . . . . 19

ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 21

MP3/WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 34

ꢀ Erasing a Track from Program List. . . . . . . . 34

ꢀ Erasing the Complete Program List . . . . . . . 34

Operation

VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . 22-27

Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 22

Special Effect Playbacks . . . . . . . . . . . . . . . . . . 22

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ꢀ Still Picture and Frame-by-Frame Playback . 22

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 22

ꢀ CM Skip (Commercial Skip) . . . . . . . . . . . . . 22

ꢀ EZ (EASY) Review. . . . . . . . . . . . . . . . . . . . 22

Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 23

Timer Recording . . . . . . . . . . . . . . . . . . . . . . 23-24

Instant Timer Recording . . . . . . . . . . . . . . . . . . . 25

Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 25

Copying from DVD to VCR. . . . . . . . . . . . . . . . . 25

VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 26

Tape Counter Memory Feature. . . . . . . . . . . . . . 27

Additional Information . . . . . . . . . . . . . . . . . . . . 27

DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . 28-30

Playing DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . 28

General Features . . . . . . . . . . . . . . . . . . . . . 28-30

ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 28

ꢀ Moving to another CHAPTER. . . . . . . . . . . . 28

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 28

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 35-36

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 37

Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 38

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features on this unit.

Indicates tips and hints for making the task easier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-Related Terms

Playable Discs

Title (DVD only)

The main film content or accompanying feature content

or music album.

DVD

(8 cm/12 cm disc)

Each title is assigned a title reference number enabling

you to locate it easily.

Audio CD

(8 cm/12 cm disc)

Chapter (DVD only)

In addition, this unit can play CD-Rs or CD-RWs that

contain audio titles, MP3, JPEG or WMA files.

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number to

enable you to locate the chapter you want. Depending

on the disc, the DVD may not be divided into chapters.

otes

– Depending on the conditions of the recording

equipment or the CD-R/RW disc itself, some

CD-R/RW discs cannot be played on the unit.

– The unit cannot play discs that contain data other

than MP3 and CD-DA data.

– Do not attach any seal or label to either side

(the labeled side or the recorded side) of a disc.

– Do not use irregularly shaped CDs

Track (Audio CD only)

Sections of a musical piece on an audio CD. Each track

is assigned a track number, enabling you to locate the

track you want.

Remote Control Battery Installation

(e.g., heart-shaped or octagonal). The unit may

malfunction.

Detach the battery cover on the rear of the

remote control, and insert two R03 (size

AAA) batteries with

correctly.

and

aligned

otes on DVDs

Some playback operations of DVDs may be intentionally

fixed by software manufacturers. As this unit plays

DVDs according to disc content designed by the software

manufacturer, some playback features of the unit may

not be available or other functions may be added.

Refer also to the instructions supplied with the DVDs.

Some DVDs made for business purposes may not be

played on the unit.

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Remote Control Operating Range

Point the remote control at the remote sensor and press

the buttons.

Regional code of this DVD+VCR and DVDs

This DVD+VCR is designed and manufactured

^ꢀDistance: About 23 ft (7 m) from the front of the

remote sensor

^ꢀAngle: About 30° in each direction of the front of the

remote sensor

for playback of Region 1 encoded DVD software.

The region code on the labels of some DVD discs indi-

cate which type of DVD+VCR can play those discs. This

unit can play only DVD discs labeled 1 or ALL. If you try

to play any other discs, the message “Check Regional

Code” will appear on the TV screen. Some DVD discs

may not have a region code label even though their play-

back is prohibited by area limits.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE

RECYCLED OR DISPOSED OF IN A SAFE MANNER

IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR

LOCAL COUNTY SOLID WASTE AUTHORITY.

ote on DTS-encoded CDs

When playing DTS-encoded CDs, excessive noise may

be heard from the analog stereo output. To avoid

possible damage to the audio system, turn down the

volume before playing back such discs, adjust the

volume gradually, and keep the volume level low. To

enjoy DTS Digital Surround^TMplayback, an external 5.1

channel Digital Surround^TMdecoder system must be

connected to the digital output of the unit.

Manufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby

Laboratories. Confidential unpublished works. Copyright

DTS and DTS Digital Out are trademarks of Digital Theater

Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Cleaning discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

Yes

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

About Symbols

Cleaning the unit

About the

symbol display

To clean the cabinet

“

” may appear on the TV screen during operation.

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

DVD DVD

Audio CDs.

MP3 MP3 Discs.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

WMA Discs.

JPEG Files.

WMA

JPEG

For details, please contact your nearest dealer.

Selecting the Viewing Source

Notes on Discs

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

Handling discs

• If you want to view DVD deck output source:

Press DVD on the remote or DVD/VCR on the front panel

until DVD indicator in the display window lights and output

source of DVD deck is viewed on the TV screen.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

Do not stick paper or tape on the disc.

• If you want to view VCR deck output source:

Press VCR on the remote or DVD/VCR on the front panel

until VCR indicator in the display window lights and output

source of VCR deck is viewed on the TV screen.

otes

Storing discs

• If you insert a disc while the DVD+VCR is in the VCR

mode, the DVD+VCR will switch to DVD mode

automatically.

• If you insert a cassette tape without an erasure

prevention tab while the DVD+VCR is in the DVD

mode, the DVD+VCR will switch to VCR mode auto-

matically.

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls

Disc Tray (DVD deck)

Insert a disc here.

EJECT(Z)

Ejects the tape in the VCR deck.

Forward SKIP/SCAN (

/ )

R T

DVD: Go to NEXT chapter/track. Press and hold for two seconds for

a fast forward search.

VCR: Advances the tape while in STOP mode or for fast forward picture search.

PLAY (B)

To play back a recorded tape or disc.

Reverse SKIP/SCAN ( / )

S Q

DVD: Go to beginning of current chapter/track or to previous

chapter/track. Press and hold for a fast reverse search.

VCR: Rewinds the tape while in STOP mode or for fast reverse picture search.

Cassette Compartment

(VCR deck)

Insert a video cassette here.

OPEN/CLOSE (Z)

Opens or closes the disc tray.

Remote Sensor

Point the

DVD+VCR remote

control here.

Display window

Shows the current status

of the DVD+VCR.

COPY

Press to copy a

DVD in the DVD

deck to a VHS tape

in the VCR deck.

CH (v/V)

To scan up or

down through

memorized

channels.

REC/ITR (z)

DVD/VCR (output select)

Select the DVD or VCR

output source to view on the

TV screen.

To record normally or

to activate Instant

Timer Recording.

DVD/VCR indicator

Indicates the active deck.

PAUSE/STEP(X/C)

Pause playback of a tape or a

disc in the DVD or VCR deck

temporarily/press repeatedly for

frame-by-frame playback.

POWER

Switches the DVD+VCR ON and OFF.

LINE 2 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/Monitor, another VCR).

STOP (x)

Stops playback of a disc or tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

DVD deck is selected.

A disc is loaded in the DVD deck.

(Lights when a disc is loaded in the DVD deck

and flashes when no disc is loaded.)

Indicates repeat mode.

DVD to VCR copy is in progress.

DVD+VCR is in VCR timer recording mode

or a VCR timer recording is programmed.

A cassette is loaded in the VCR deck.

VCR deck is selected.

DVD

COPY

VCR

REC

Indicates TV mode.

(See page 23.)

Indicates PM time. (AM is not displayed.)

DVD+VCR is Recording a tape.

Indicates total playing time, elapsed time, remaining time or

current deck status (Playback, Pause, etc).

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

DVD/VCR select button

Select the output source (DVD or VCR)

to view on the TV screen.

OPEN/CLOSE, EJECT (Z)

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

POWER

Switches DVD+VCR ON and OFF.

INPUT

Selects the VCR deck’s source

(Tuner, LINE 1, or LINE 2).

TV/VCR

To view channels selected by the VCR

tuner or by the TV tuner.

PROGRAM

Accesses or removes Program menu.

0-9 numerical buttons

Selects numbered options in a menu.

CLEAR

Removes a track number on the

program menu or a mark on the

MARKER SEARCH menu.

AUDIO

Selects an audio language (DVD) or an

audio channel (CD).

SUBTITLE

Selects a subtitle language.

ZOOM

Enlarges DVD video image.

MARKER

Marks any point during playback.

ANGLE

Selects a DVD camera angle if

available.

Displays MARKER SEARCH menu.

DISPLAY, CLK/CNT

Accesses On-Screen display.

DISC MENU

Accesses DVD menus.

Switches between the clock, tape counter

and tape remaining modes on the display.

SELECT/ENTER

- Acknowledges menu selection.

- Displays functions on the TV screen.

b/B/v/V (left/right/up/down)

- Selects an option in the menu.

RETURN

Removes the Setup menu.

- CH/TRK (v/V : Selects VCR channels.

)

Manually adjusts the tape’s picture

onscreen.

^ꢀBACKWARD (.)

DVD: Search backward*/go to beginning

of current chapter or track or go to previ-

ous chapter or track.

SETUP, MENU

Accesses or removes DVD Setup menu

and VCR menu.

VCR: Rewinds the tape in STOP mode

or for fast reverse picture search.

PAUSE/STEP (X) ^ꢀ

Pause playback or recording

temporarily/press repeatedly for

frame-by-frame playback.

* Press and hold button for about two

seconds.

^ꢀPLAY (N)

Starts playback.

STOP (x) ^ꢀ

Stops playback.

^ꢀFORWARD (>)

DVD: Search forward*/go to next

chapter or track.

VCR: Advances the tape in STOP mode

or for fast forward picture search.

REC/ITR (z) ^ꢀ

Records normally or activates Instant

Timer Recording.

REPEAT, EZ review ^ꢀ

Repeat chapter, track, title, all.

Replays the specified segment twice.

RANDOM, CM Skip ^ꢀ

- Plays tracks in random order.

- Fast forwards picture search through

30 seconds of recording.

A-B, SP/SLP ^ꢀ

- Repeats sequence.

- Selects recording speed.

ote

This remote control use the same buttons for VCR and DVD

functions (ex. PLAY).

To use the VCR, first press the VCR button.

To use the DVD, first press the DVD button.

TITLE ^ꢀ

Displays the disc’s Title menu, if

available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections Panel

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

Connect to a TV with video and audio inputs.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT

(Y Pb Pr) (DVD OUT) Connect to a TV with Y Pb Pr inputs.

AUDIO OUT (Left/Right) (DVD OUT)

Connect to a TV, amplifier, receiver, or stereo system.

VCR IN LINE 1

(VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/Monitor,

another VCR).

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

AC Power Cord

Plug into the power source.

DIGITAL AUDIO OUT (OPTICAL) (DVD OUT)

Connect to digital (Optical) audio equipment.

RF OUT(DVD/VCR OUT)

Connect to a TV with RF coaxial inputs.

DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)

Connect to digital (coaxial) audio equipment.

ANTENNA INPUT

Connect the VHF/UHF/CATV antenna to this terminal.

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Without Cable Box

ips

If your cable wire is connected to your TV without a converter

or descrambler box, unscrew the wire from your TV and attach

it to the ANT.IN jack on the DVD+VCR. Use the supplied round

coaxial cable to connect between the DVD+VCR’s RF.OUT

jack and the 75 ohm antenna input jack on the TV. With this

connection, you can receive all midband, super band, and

hyperband channels.

ꢀ

Depending on your TV and other equipment you wish to

connect, there are various ways you could connect the

DVD+VCR. Use connections described on pages 11-14.

Please refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the best

connections.

For better sound reproduction, connect the DVD+VCR’s

DVD/VCR AUDIO OUT jack to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment. See

Optional, Preferred TV Connections on pages 13-14.

With Cable Box

If a converter is required in your cable system, follow the

instruction below:

The cable hookup permits both TV and DVD+VCR operation.

Caution

To view or record CATV channel

ꢀ

Make sure the DVD+VCR is connected directly to the TV.

Tune the TV to the correct video input channel.

Do not connect the DVD+VCR’s DVD/VCR AUDIO OUT

jack to the phono in jack (record deck) of your audio

system.

1 Tune the TV to the DVD+VCR output channel (CH 3 or 4).

2 Set the DVD+VCR channel selector to the output channel of

the Cable Converter box by using the CH/TRK (v/V) or

number (0-9) of your DVD+VCR. (Example: CH3)

3 Select the channel to view at the Cable Converter Box.

ꢀ

Do not connect your DVD+VCR via your VCR. The DVD

image could be distorted by the copy protection system.

otes

ꢀ With this connection, you CANNOT record one program

while viewing another.

ꢀ If you are using a cable box to tune channels, it is not nec-

essary to do Auto Channel Programming as indicated on

page 16.

Connecting Antenna/Cable TV to

DVD+VCR

Disconnect the antenna leads from the rear of the

TV.

Cable TV

Wall Jack

Identify the type of cable from your antenna. If it is

2 _{a round cable as illustrated, it is a 75 ohm coaxial}

antenna cable. This cable will connect directly to

the jack marked ANT.IN on your DVD+VCR.

Back Panel of

Typical Cable Box

If your antenna lead wire is a flat type antenna cable,

connect it to an Antenna Adapter (300-ohm to 75-ohm)

(not supplied) and slip the Adapter onto the ANT.IN

jack. The Adapter does not screw on to the DVD+VCR,

it just slips over the jack.

Antenna

Cable TV

Wall Jack

Flat Wire

(300 ohm)

DVD+VCR Connections Panel

300/75 ohm

Adapter

(Not supplied)

DVD+VCR Connections Panel

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Basic TV Connections

TV Connections Panel

ANTENNA

INPUT

VIDEO

INPUT

AUDIO INPUT

ꢀ

Make one of the following connections, depending on

the capabilities of your existing equipment.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the

antenna in jack on the TV using the 75-ohm Coaxial

Cable supplied (R).

ote

If you use this connection, tune the TV to the

DVD+VCR’s RF output channel (CH 3 or 4).

How to set up the DVD+VCR’s RF output channel

1.While the DVD+VCR is turned off, press and hold CH

(v/V) on the front panel for about five seconds.

The unit will turn itself on and “RF 03” or “RF 04” appears in

the display window.

2.Use CH (v/V) on the front panel or CH/TRK (v/V) on

the remote control to change the RF output

channel (CH 03 or CH 04).

DVD+VCR Connections Panel

3.Turn the DVD+VCR off and then on.

4.Select TV CH to 3 or 4 depending on the RF

output channel you had selected.

Now you can watch the DVD+VCR playback on TV

Channel 3 or 4.

Audio/Video connection

Connect the DVD/VCR VIDEO OUT jack on the

DVD+VCR to the video in jack on the TV using the

video cable supplied (V).

Connect the Left and Right DVD/VCR AUDIO OUT

2 _{jacks on the DVD+VCR to the audio left/right in}

jacks on the TV (A1) using the supplied audio

cables.

ote

If you use this connection, set the TV’s source selector

to VIDEO.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Optional, Preferred TV Connections

TV Connections Panel

S-VIDEO

INPUT

COMPONENT VIDEO INPUT

AUDIO INPUT

otes

ꢀ You can ONLY watch and listen to DVD+VCR

playback through the connections on the right.

S-Video connection

Connect the S-VIDEO OUT jack from the

DVD+VCR to the S-Video in jack on the TV using

the optional S-Video cable (S).

Connect the Left and Right AUDIO OUT jacks from

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV using the supplied audio cables (A2).

Component Video (Color Stream^®) connection

Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks from the DVD + VCR Player to

the corresponding in jacks on the TV using an

optional Y Pb Pr cable (C).

Connect the Left and Right AUDIO OUT jacks from

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV (A2) using the supplied audio cables.

DVD+VCR Connection Panel

ote

Progressive Scan (ColorStream^®pro) connection

If the TV has an S-video input, connect the DVD+VCR

with the S-video cable. When using an S-video cable,

do not connect the yellow video cable.

ꢀ If your television is a high-definition or “digital ready”

television, you may take advantage of the

DVD+VCR’s progressive scan output for the highest

video resolution possible.

ꢀ If your TV does not accept the Progressive Scan

format, the picture will appear scrambled if you select

Progressive Scan output from the DVD+VCR.

Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks from the DVD+VCR to the

corresponding in jacks on the TV using an optional

Y Pb Pr cable (C).

Connect the Left and Right AUDIO OUT jacks from

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV (A2) using the supplied audio cables.

otes

– Set the Progressive to “On” from the Setup menu,

see page 19.

– Progressive scan does not function simultaneously

with the analog video connections (yellow VIDEO

OUT jack).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Rear of DVD+VCR

Optional, Preferred TV Connections

ote

You can ONLY listen to DVD playback using COAXIAL

(X), OPTICAL (O) and AUDIO OUT (A2) connections.

The tuner and VCR will still be heard through the

RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See

page 12.)

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR

AUDIO OUT) jacks on the DVD+VCR to the audio left

and right in jacks on your amplifier, receiver, or stereo

system using the audio cables (for A1 or A2 connection)

supplied.

COAXIAL

OPTICAL

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/Video

receiver equipped with a multi-channel decoder

(Dolby Digital™, MPEG 2, or DTS)

AUDIO INPUT

DIGITAL INPUT

Amplifier (Receiver)

Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (COAXIAL X or OPTICAL O) to the

corresponding in jack on your amplifier. Use an

optional digital (COAXIAL X or OPTICAL O) audio

cable.

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or LINE 2 jacks on the

DVD+VCR to the audio/video out jacks on your

accessory component, using the optional audio/video

cables.

You will need to activate the DVD+VCR’s digital

2 _{output. (See “Digital Audio Output” on page 20).}

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD+VCR (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Accessory Device Jack Panel

AUDIO

OUTPUT

VIDEO

OUTPUT

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

otes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD in the on-

screen display, press AUDIO.

Rear of DVD+VCR

Front of DVD+VCR

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation Setup

EASY INFORMATION

On-Screen Display (OSD)

Some of these functions will be displayed every time the

VCR is operated.

If the Extended Data Service (XDS) signals are provided

along with normal TV signal in your area or during play-

back of a tape recorded with Extended Data Service

(XDS) signals, the station ID, program title, and program

details are shown on the TV screen.

❶

❷

❸

❹

❺

When viewing a channel with Extended Data Service (XDS)

signals, press SELECT/ENTER and the station ID will

appear on the TV screen. Press SELECT/ENTER again

and the program details will appear on the TV screen.

When viewing a tape recorded with Extended Data

Service (XDS) signals, press SELECT/ENTER twice

and the program title and program details will appear on

the TV screen.

PLAY

HI-FI

CH 4

STEREO

JUL 5 , SAT

2:15 PM

❻

❼

PROGRAM DETAILS

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a

program.

❶ TAPE SPEED DISPLAY

Shows the current tape speed.

❷ FUNCTION DISPLAY

RATING: Indicates the rating of the current program

(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The

rating N/A means that the motion picture ratings are not

applicable to this program.

Indicates the function in progress.

❸ HI-FI DISPLAY

Indicates when this unit is playing back tape recorded with

Hi-Fi.

❹ CHANNEL DISPLAY

CH 4

WABC STEREO

PROGRAM DETAILS

“Home video”

Indicates the selected channel (or LINE1, LINE2).

❺ STEREO/SAP DISPLAY (MONO is not displayed)

Shows the type of audio signal received by the VCR tuner.

❻ DATE DISPLAY

Shows the current date. (Month/Date/Day of the week

format)

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

“Home video”

JUL 5 , SAT

2:15 PM

Easy Information Screen

(Program details)

Easy Information Screen

(Station ID)

❼ CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time

on the tape.

On-Screen Menus Setup

The SETUP, clock setting (CLOCK), and timer

recordings (PROGRAM) functions are accessed conve-

niently with the on-screen menus, that lead you through

each step. The following pages describe the on-screen

menu selections available.

Each press of the SELECT/ENTER changes the TV

on-screen displays in the following sequence.

STOP

STEREO

Menu Selection

JUL 5 , SAT

2:15 PM

Your VCR allows remote control adjustment of several

features.

Press MENU and the MAIN menu will appear.

2:15 PM

0:35:40

REM 1:58

Select the desired menu with v/V button and

2 _{then press SELECT/ENTER.}

ote

Menus remain on-screen for 3 minutes.

otes

ꢀ Function displays remain on the TV screen for 5 seconds.

ꢀ The clock (or tape counter, tape remaining) mode will be dis-

played until you press SELECT/ENTER.

MAIN MENU

ꢀ The tape counter and the remaining tape length indicator

appear only when a cassette is inserted. Also, the remaining

tape length indicator appears after any tape operation.

CLOCK SET (page 17)

PROGRAM (page 23)

TUNING (page 16)

SETUP (page 16)

Press MENU when finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation Setup (Continued)

VCR Setup Menu Options

Channel Selection

This DVD+VCR is equipped with a frequency

synthesized tuner capable of receiving up to 181

channels. These include VHF channels 2-13, UHF

channels 14-69 and CATV channels 1-125.

Press MENU and the MAIN menu will appear.

Use v/V to select the SETUP menu, then press

2 _{SELECT/ENTER.}

Preparation:

ꢀ Connect the DVD+VCR to the desired type of antenna or

The SETUP menu will appear.

cable TV system, as shown in Connecting Antenna/Cable TV

to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

Press MENU and the MAIN menu will appear.

Use v/V to choose a desired option on the

3 _{SETUP menu. Then use b/B to make adjust-}

ments.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or off.

Use v/V to select the TUNING menu, then press

2 _{SELECT/ENTER.}

The TUNING menu will appear.

ꢀ Use b/B to switch the FUNCTION OSD ON or OFF.

LANGUAGE SELECT

The on-screen programming menu of this DVD+VCR can be

displayed in either English, Spanish, or French.

ꢀ Use b/B to select the menus language.

AUDIO MODE

Use v/V to choose the SOURCE SELECT option,

The DVD+VCR has two separate audio playback systems, the

high quality VHS Hi-Fi system and standard NORMAL mono

system. The same audio is generally recorded on both

systems. The VHS Hi-Fi system plays on separate (left and

right) channels, and the NORMAL system plays monaural

sound. The normal track is always played so the cassette can

be played on a DVD+VCR that does not have VHS Hi-Fi.

ꢀ AUDIO MODE can be switched between HI-FI and

NORMAL using b/B.

3 _{then use b/B to select TUNER.}

Press b/B repeatedly to switch between TUNER, LINE1,

and LINE2.

Use v/V to choose the AUTO CHANNEL SET option,

4 _{then use b/B to start the channel search.}

The tuner will automatically search for all available

channels in the area and place them in the tuner’s

memory.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or

Second Audio Program (SAP) bilingual signals. Set this display to

the desired position when both MTS stereo and SAP signals are

received. When only one of the MTS signal is received, the

DVD+VCR automatically selects the corresponding receiving

mode (Stereo or SAP) regardless of the selected position. For

normal operation, the display should be in the STEREO position.

The DVD+VCR will then record a STEREO program when available,

and record a mono program IF the program is NOT IN STEREO.

For weak STEREO and/or SAP broadcasts, changing the dis-

play to mono may give clearer sound.

After the AUTO CHANNEL SET

5 _{PROCEEDING(Channel Search) is complete,}

make sure the TUNING BAND is set correctly

(TV or CATV). Use v/V to choose the TUNING

BAND option, then select (TV or CATV) by using

b/B while in the TUNING menu.

Remember, TV is for the air antenna reception,

CATV is for cable or wireless cable connection.

Press MENU to return to the TV screen.

ꢀ BROADCAST TYPE can be switched between STEREO,

SAP, and MONO using b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Use CH/TRK (v/V) or CH (v/V) on the front

panel to cycle the DVD+VCR through the

channels in memory.

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is

in HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi-

tion, so that when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a mono tape is

played and the audio output is set to stereo, the same mono

sound will be heard from both left and right channels.

ꢀ AUDIO OUTPUT can be switched between STEREO, LEFT,

and RIGHT using b/B.

TO ADD OR ERASE CHANNELS

This feature allows you to add or erase channels from

memory manually.

Use v/V to choose the CH. ADD/DEL option on the

TUNING menu. Use b/B to select a channel to add

or erase.

Press MENU when finished.

Use SELECT/ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase other

channels.

Press MENU to return to the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation Setup (Continued)

Setting the Clock

ote

There are cases where the TV station does not send or sends

wrong date and/or time information and the DVD+VCR sets the

incorrect time.

The DVD+VCR gives you two ways to set the time and

date: the Auto Clock Feature or manually. The Auto

Clock feature enables the DVD+VCR to set up the clock

while the DVD+VCR is turned off.

If this happens we recommend that you set the clock manually.

Manual Clock Set

Things to know before starting

The clock uses the 12-hour system. (Be sure to set AM

ꢀ

and PM correctly.) (AM does not appear.)

Press MENU and the MAIN menu will appear.

ꢀ

The initial Clock Setting is JANUARY 1, 2003, 12:00 AM.

Use v/V to choose the CLOCK menu.

2 _{Press SELECT/ENTER and the CLOCK menu}

will appear.

Auto Clock Set

The Auto Clock Set feature is set to ON at the factory. In the

ON setting, the DVD+VCR looks for a channel carrying XDS

(Extended Data Services) information. XDS updates the clock

using the Coordinated Universal Time.

The Auto Clock feature enables the DVD+VCR to set up

the clock while the DVD+VCR is turned off.

Press MENU and the MAIN menu will appear.

Use b/B to choose the month.

Use v/V to choose the CLOCK menu.

2 _{Press SELECT/ENTER and the CLOCK menu}

will appear.

Use V to choose the DAY option.

4 _{Use b/B to choose the date.}

The day of the week will display automatically.

Use V to choose the YEAR option.

5 _{Use b/B to choose the year.}

Use V to choose the TIME option.

6 _{Use b/B to choose the time.}

continuously.

Press and hold b/B to advance clock

Use V to choose the AUTO CLOCK SET option.

3 _{Use b/B to choose ON.}

Use E to choose the DAYLIGHT SAVINGS item.

The Auto Clock Set feature is set to ON at the factory. In

the ON setting, the DVD+VCR looks for a channel

carrying XDS (Extended Data Services) information. XDS

updates the clock using the Coordinated Universal Time.

Use F or G to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR adjusts the clock for Daylight

Saving Time automatically.

Use E to choose the DAYLIGHT SAVINGS

4 _option.

Use F or G to choose AUTO, ON, or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR adjusts the clock for Daylight

Saving Time automatically.

Use E to choose the TIME ZONE option.

5 _{Use F or G to choose the correct time zone}

Press MENU when finished.

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

PACIFIC, ALASKA or HAWAII).

If “AUTO” is selected as the time zone, the VCR sets the

clock using the first Coordinated Universal Time informa-

tion it finds in a broadcast signal.

ote

If setting the clock manually, “AUTO CLOCK SET” must

set to “OFF”.

If set to “ON”, an incorrect date and/or time will be

entered again when the DVD+VCR is turned off.

Press MENU when finished.

Turn off the DVD+VCR and the auto clock set

feature sets the time.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup

General Explanation

Temporary Feedback Field Icons

TITLE

Repeat Title (DVD)

This manual gives the basic instructions for operating

the DVD+VCR. Some DVDs require specific operation

or allow only limited operation during playback. When

CHAPT

Repeat Chapter (DVD)

Repeat A-B

this occurs, the symbol

appears on the TV screen,

OFF

Repeat Off

indicating that the operation is not permitted by the

DVD+VCR or is not available on the disc.

Resume play from this point

Action prohibited or not available

On-Screen Display

The general playback status can be displayed on the

TV screen. Some options can be changed on the menu.

otes

ꢀ Some discs may not provide all of the features on the

on-screen display example shown below.

ꢀ If no button is pressed for 10 seconds, the on-screen

display disappears.

On-screen display operation

Press DISPLAY during playback.

Use v/V to select an option.

2 _{The selected option will be highlighted.}

Use b/B to change the setting of an option.

3 _{The number buttons can be also be used for setting}

numbers (e.g., title number). For some functions,

press SELECT/ENTER to execute the setting.

DVD

Options

Function (Use v

V to select desired option)

Selection Method

Title Number

Shows the current title number and total number of

titles, and skips to the desired title number.

b/B, or

Numeric, SELECT/ENTER

1/3

1/12

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

b/B, or

Numeric, SELECT/ENTER

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

Numeric, SELECT/ENTER

0:16:57

Audio language

and Digital Audio

Output mode

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

ENG

5.1CH

b/B, AUDIO

Subtitle language

Shows the current subtitles language, and

changes the setting.

OFF

1/1

ABC

b/B, SUBTITLE

b/B, ANGLE

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

Sound

Shows the current sound mode, and

changes the setting.

NORM.

b/B

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Initial Settings

Picture

TV Aspect DVD

You can set your personal preferences on the

DVD+VCR.

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays pictures with masking bars above and

below the picture.

General Operation

Press SETUP.

The Setup menu appears.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

16:9 Wide: Select when a 16:9 wide TV is connected.

French

Rating

German

Spanish

Italian

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Country Code

TV Aspect

Disc Subtitle

Disc Menu

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Chinese

Polish

Rating

Country Code

TV Aspect

Hungarian

Other — — — —

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Use v/V to select the desired option.

2 _{The screen will show the current setting for the}

selected option, as well as alternate setting(s).

Others

Progressive Scan DVD

While the desired option is selected, press B,

Progressive Scan Video provides the highest resolution

pictures with less flicker and line structure.

If you are using the COMPONENT/PROGRESSIVE

SCAN VIDEO OUT jacks, but are connecting the

DVD+VCR to a standard (analog) television, set

Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

3 _{then v/V to select the desired setting.}

Press SELECT/ENTER to confirm your selection.

4 _{Some options require additional steps.}

Press SETUP, RETURN, or PLAY ( B) to exit the

5 _{setup menu.}

Language

Disc Language DVD

Select a language for the disc’s Menu, Audio, and

Subtitle features.

Off

Disc Audio

Original : The original language set for the disc is selected.

Other : To select another language, use number buttons to

enter the corresponding 4-digit number according to the

language code list on page 37. If you enter the wrong

language code, press CLEAR.

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

ote

Disc Language selection may not work for some DVDs.

Others

Original

English

Disc Audio

Disc Subtitle

Disc Menu

French

Rating

German

Spanish

Italian

otes

Country Code

TV Aspect

– Progressive Scan is available only when the VIDEO

OUTPUT switch on the rear panel is set to

COMPONENT.

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Chinese

Polish

Hungarian

Other — — — —

Caution

Others

Once the setting for progressive scan output is entered, an

image will only be visible on a progressive scan compatible

TV or monitor. If you set Progressive Scan to On in error,

you must reset the unit. Pointing the remote at the player,

press the STOP (x) key to stop any disc that is playing.

Next, press the STOP (x) key again and hold it for five

seconds before releasing it. The video output will be

restored to the standard setting, and a picture will once

again be visible on a conventional analog TV or monitor.

Menu Language

Select a language for the Setup menu. This is the menu

you see when you press SETUP.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Sound

Others

The DRC, Vocal and Auto Play settings can be

changed.

Digital Audio Output

Each DVD disc has a variety of audio output options.

Set the DVD+VCR’s Digital Audio Output according to

the type of audio system you use.

ꢀ

Use v/V to select the desired option and then press

SELECT/ENTER repeatedly to select On or Off.

DRC On

DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if

you have connected the DVD+VCR’s DIGITAL AUDIO

OUT jack to a Dolby Digital decoder (or an amplifier or

other equipment with a Dolby Digital decoder).

Stream/PCM: Select Stream/PCM if you have

connected the DVD+VCR’s DIGITAL AUDIO OUT jack

to an amplifier or other equipment with a DTS decoder,

Dolby Digital decoder or MPEG decoder.

Disc Audio

Vocal On

Disc Subtitle

Disc Menu

Auto Play off

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

PCM: Select when connected to a 2 channel digital

stereo amplifier. The DVD+VCR outputs sounds in the

PCM 2ch format when you play a DVD video disc

recorded with a Dolby Digital, MPEG1, or MPEG2

recording system.

Dynamic Range Control (DRC)

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

DOLBY

_DIGITAL/PCM

Stream/PCM

PCM

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Sample Freq.

48 KHz

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

96KHz

Vocal

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Others

Sample Frequency

Auto Play DVD

To change the Sample Frequency setting, first select

the desired Digital Audio Output as indicated above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz

signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

You can set up the DVD Player so a DVD disc automat-

ically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will

search for a title that has the longest playback time and

then play back the title automatically.

On: Auto Play function works.

Off: Auto Play function does not work.

ote

The Auto Play function may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Parental Control

DVD

Country Code

Enter the code of a country whose standards were used

to rate the DVD video disc, referring to the list (See

“Country Code List”, page 38.).

Rating DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Code Set

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Disc Audio

Others

Disc Subtitle

Disc Menu

Rating

Select the Country Code option using the v/V

buttons on the setup menu.

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

While Country Code is selected, press B.

Unlock

Change

Follow step 3 of “Rating” on left.

Others

Select Rating on the Setup menu using v/V

buttons.

Select the first character using the v/V buttons.

Press 2 to shift to second character and select

While Rating is selected, press B.

5 _{the second character using v/V buttons.}

Press SELECT/ENTER to confirm your Country

6 _{Code selection, then press SETUP to exit the}

menu.

When you have not entered a password yet.

3 _{Enter a 4-digit password using the numbered but-}

tons to create a personal 4-digit security password,

then press SELECT/ENTER. Enter the 4-digit

password again and press SELECT/ENTER to verify.

When you have already entered a password;

Enter a 4-digit password using the numerical

buttons to confirm the personal 4-digit security

password, then press SELECT/ENTER.

ote

Confirmation of the 4-digit password is necessary when

the password is changed (see Changing the 4-digit

password below ).

Changing the 4-digit password

If you make a mistake before pressing SELECT/ENTER,

press CLEAR and enter 4-digit security password again.

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old password, then press SELECT/ENTER.

3 Select Change using v/V buttons then press

SELECT/ENTER.

4 Enter the new 4-digit password, then press

SELECT/ENTER.

5 Enter exactly the same password a second time and

verify by pressing SELECT/ENTER.

6 Press SETUP to exit the menu.

Select a rating from 1 to 8 using v/V buttons.

4 _{One (1) has the least playback restrictions.}

Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the

DVD+VCR, all disc scenes with the same rating or

lower will be played. Higher rated scenes will not be

played unless an alternative scene is available on

the disc. The alternative must have the same rating

or a lower one. If no suitable alternative is found,

playback will stop. You must enter the 4-digit pass-

word or change the rating level in order to play the

disc.

If you forget your 4-digit password

If you forget your password, to clear the current pass-

word follow the procedure below.

1 Press SETUP to display the setup menu.

2 Enter the 6-digit number 210499 and then press

SELECT/ENTER.

The 4-digit password is cleared.

3 Enter a new password as shown above to the left

(Rating).

Press SELECT/ENTER to confirm your rating

5 _{selection, then press SETUP to exit the menu.}

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation

Normal Playback

This function lets you quickly and visually search for a

desired tape section in either direction: forward or

reverse.

Preparation:

ꢀ Turn on the TV.

ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.

1 Press BACKWARD (.) or FORWARD (>)

during playback.

The DVD+VCR will be activated in the SEARCH

mode.

ꢀ If the DVD+VCR is left in the SEARCH mode for more

than 3 minutes, the DVD+VCR will automatically enter the

PLAY mode, to protect the tape and video heads.

2 To return to playback, press PLAY ( B).

ꢀ

If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to VIDEO.

ꢀ Set the Output Source to VCR as shown in “Selecting the

Viewing Source” on page 6.

Insert a prerecorded video cassette.

The

power-up automatically.

indicator will light and the DVD+VCR will

Still Picture and Frame-by-Frame Playback

1 Press PAUSE/STEP (X) during playback.

Still picture will appear on the TV screen.

ꢀ If a still picture vibrates vertically, stabilize it using

v/V on the remote control.

ꢀ Make sure that the

indicator in the display

window is not lighted. If it is, press POWER once.

ꢀ If a tape without a safety tab is inserted, the unit will

start playback automatically.

Press PLAY ( B) once.

ꢀ If the DVD+VCR is left in the STILL mode for more than 5

minutes, the DVD+VCR will automatically enter the STOP

mode to protect the tape and video heads.

2 _{PLAY appears on the TV screen .}

ꢀ It is not necessary to select the tape speed for

playback. It will be automatically selected by the

DVD+VCR.

2 Press PAUSE/STEP (X) repeatedly to advance the

video picture one frame at a time while viewing a still

picture.

ꢀ In playback, the TV/VCR selector switches to VCR

mode automatically.

3 To return to playback, press PLAY ( B).

Press STOP (x) to stop playback.

3 _{STOP appears on the TV screen.}

ꢀ If the tape reaches the end before STOP (x) is

pressed, the DVD+VCR will automatically stop, rewind

and eject the tape, and it will turn itself off.

Slow Motion

1 While in still mode, press FORWARD (>).

The tape will be played back at a speed 1/19 times

slower than the normal speed.

ꢀ During slow playback, use v/V on the Remote Control to

minimize noise bands.

Tracking Control

Auto Tracking

The automatic tracking function adjusts the picture to

remove snow or streaks.

The AUTO TRACKING function works in the following

cases:

ꢀ If slow motion mode continues for more than 3 minutes,

the DVD+VCR will automatically change to playback

mode.

2 To return to playback, press PLAY ( B).

ꢀ A tape is played back for the first time.

ꢀ Tape speed (SP, LP, SLP) changes.

ꢀ Streaks or snow appear because of scratches on the tape.

CM Skip (Commercial Skip)

This is useful for skipping commercials or short program

segments.

1 Press CM Skip during playback.

The tape will fast forward picture search through 30

seconds of recording.

Manual Tracking

If noise appears on the screen during playback, press

either CH/TRK v/V on the remote control or CH (v/V)

on the front panel until the noise on the screen is

reduced.

ꢀ Skipping time can be extended by pressing CM Skip

repeatedly.

ꢀ In case of vertical jitter, adjust tracking controls very

carefully.

ꢀ Subsequent presses result in advancing the fast forward

picture search time by 30-second increments (maximum 3

minutes).

ꢀ Tracking is automatically reset to normal when the tape is

ejected or the power cord is unplugged for more than 3

seconds.

2 When the search is complete, the DVD+VCR will go

into playback mode automatically.

Special Effect Playbacks

EZ (EASY) Review

You can replay a specified segment twice.

Special effects playback notes

ꢀ Horizontal lines (noise bars) will appear on the TV screen.

This is normal.

During playback, press and hold EZ REVIEW for

more than 3 seconds at the end of the segment

and your VCR will start reverse search.

ꢀ The audio is automatically muted during special effect modes,

so there is no sound during search.

Release EZ REVIEW at the beginning of the

2 _{segment. The segment is replayed twice}

automatically.

ꢀ During high-speed picture search mode, a short period is

needed to stabilize tape speed when re-entering the PLAY

mode. Slight interference may be observed during this period.

To return to normal play, press PLAY ( B) during

easy review playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Normal Recording

Timer Recording

Preparation:

This DVD+VCR can be programmed to record up to 8

programs within a period of 1 year. For unattended

recording, the timer needs to know the channels to be

recorded and the starting and ending times.

ꢀ Turn on the power of both the DVD+VCR and TV.

ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.

ꢀ If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.

Things to know before starting

If you try to set the program timer before setting the clock,

ꢀ

Insert a video cassette with the safety tab intact.

PLEASE SET THE CLOCK appears for a moment and

then CLOCK menu appears on the TV screen. Set the time

and date before proceeding.

Select the desired channel with CH/TRK (v/V).

ꢀ

Make sure a tape is in the DVD+VCR and the safety tab is

in place or the tape will be automatically ejected.

ꢀ If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the

LINE1 or LINE2 with INPUT.

Preparation:

ꢀ Turn on the power of both the DVD+VCR and the TV.

Be sure the TV is set to the DVD+VCR output channel (3 or 4).

ꢀ Make sure the TUNING BAND in the TUNING menu is set

appropriately (TV or CATV).

Set the desired recording speed (SP or SLP)

3 _{with SP/SLP.}

Set the MTS mode as desired (See page 16, 26).

ꢀ

ꢀ This DVD+VCR is not designed to record in LP mode.

Press MENU and the MAIN menu will appear.

Press REC/ITR (z) once.

Use v/V to choose the PROGRAM menu.

5 _{Recording will start. (The REC indicator will light in}

the display window.)

ꢀ REC indicator appears only when the Output Source is

set to VCR.

Press SELECT/ENTER to go to the PROGRAM

3 _menu.

ꢀ If a cassette with no safety tab is loaded, the cassette

will be ejected automatically.

The PROGRAM menu will appear.

ꢀ If all 8 programs have been entered, FULLY

PROGRAMMED message will appear for a moment

and then PROGRAM 1 will appear on the TV screen.

Press STOP (x) to stop recording.

6 _{If the tape reaches the end before STOP (x) is pressed,}

the DVD+VCR will automatically stop, rewind, eject the

tape and turn itself off.

To pause recording

1 Press PAUSE/STEP (X) to pause the tape during

recording.

The REC indicator will flash in the display window.

Use b/B to choose the PROGRAM No. (1-8).

2 When you want to continue recording, press

PAUSE/STEP (X) or press REC/ITR (z).

ꢀ After 5 minutes in pause mode, the tape will be stopped

automatically to protect the tape and the video heads.

Use

V to choose the MONTH option.

5 _{Use b/B to choose the desired month.}

Use V to choose the DAY option.

To record one TV program while

watching another

1 Use TV/VCR to select the TV mode during recording.

The TV indicator appears.

2 Using the TV, select the channel to be viewed.

6 _{Use b/B to choose the desired day.}

Use V to choose the START option.

Use b/B to choose the desired start time.

Use V to choose the STOP option.

8 _{Use b/B to choose the desired stop time.}

Use V to choose the CHANNEL option.

9 _{Use b/B to choose the desired channel}

(Channel, LINE1 or LINE2).

ips

Always use PAUSE/STEP (X) for best results when making

changes during recording.

For example: To change channels during recording, first press

Cable Users: If you have CABLE TV and used Cable Box

in Connecting Antenna/Cable TV to DVD+VCR (page 11),

using a cable box converter, you must set the channel in

this step to match the cable box output channel (usually

CH 3 or 4). Change channels on the cable box instead of

with the DVD+VCR.

PAUSE/STEP (X) to put the unit in Pause mode. Then select

the desired channel on the DVD+VCR, and press

PAUSE/STEP (X) again to resume recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Use V to choose the SPEED option.

Checking (Erasing) Timer Record

Programming

Programming can be checked whenever the DVD+VCR

Use b/B to choose the desired recording

speed (AUTO, SP or SLP).

ꢀ AUTO mode determines how much tape is left and

switches speed from SP to SLP, if necessary, to

complete recording the program. There will be some

picture and sound distortion at the point of the speed

change.

is turned on.

1 Press MENU and the MAIN menu will appear.

2 Use v/V to choose the PROGRAM menu.

Press SELECT/ENTER and the PROGRAM menu

will appear.

Use V to choose the REPEAT option.

Use b/B to choose the desired repeat (ONCE,

WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year.

WEEKLY event....for recording up to 8 programs on a

certain day of every week.

DAILY event....for recording up to 8 programs at the

same time(s) Monday through Friday.

3 Use b/B to select a program you want to check or

erase. If you want to erase the program, press

CLEAR.

4 Press MENU to return to the TV screen.

Program Priority

If the starting and ending

times of two or more timer

recordings overlap on the

If the input data is wrong, use v to select the data

and correct it using b/B.

same day, priority is given to

the earliest recording. For

example, in the diagram at

left Program number 2 will

not be recorded until

Press MENU, the program will be memorized

by the DVD+VCR.

Program number 1 is finished. The first part of Program

number 2 will not be recorded. Likewise, Program num-

ber 3 will not be recorded until Program number 2 is fin-

ished, and so on.

ꢀ

indicator lights in the display window.

ꢀ If the program preset time has past, the PAST TIME

PROGRAMMED message will appear on the TV

screen. Return to the incorrect program and program

it with the correct time.

ꢀ If you had entered a past date, timer recording will

be performed on that date of the next year.

ꢀ Additional programs may be entered by repeating

steps 1-12.

Cable Users: If your cable hookup is via a Cable

converter box, you can program multiple recordings

only on the converter box output channel. This is

because the converter determines what channel you

view through your DVD+VCR.

If you are finished programming and you want to set the

DVD+VCR to record the programs you have entered,

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE

DVD+VCR. The DVD+VCR is now set to record the preset

programs.

otes

If the power fails or the DVD+VCR is unplugged from the AC

outlet, the correct clock time and timer settings are kept in

memory for approximately 3 seconds. After 3 seconds, the

clock and program timer must be reset when power is

restored. Reset the clock according to instructions.

After setting up a timer recording, recording will start if no other

timer recordings are scheduled to occur at the same time (see

“Program Priority” at right).

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Instant Timer Recording

Dubbing and Editing

If you wish to edit or dub your camcorder (or another

VCR) recordings to this DVD+VCR, the rear (or Front)

panel mounted Audio and Video (A/V) input jacks

make the connections quick and easy. These direct

A/V jacks will also provide better picture results than

using the RF jack on the rear panel.

Instant Timer Recording allows you to make a recording

easily of a preset length without using the program

timer.

Preparation:

ꢀ Turn on the power of both the DVD+VCR and the TV.

ꢀ Be sure the TV is tuned to the DVD+VCR output channel (3 or 4).

ꢀ If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to VIDEO.

Connect the camcorder’s (or another VCR’s) A/V

outputs to your DVD+VCR as illustrated on page 14.

Set the input channel “LINE2”. (use INPUT to

Insert a video cassette with the safety tab intact.

2 _{select LINE2.)}

ꢀ

If you have connected your DVD+VCR to the A/V input

jacks on the rear of DVD+VCR, you should select the

input channel LINE1 by pressing INPUT twice.

Select the desired channel with v/V or number

2 _(0-9).

Play the tape in the camcorder (or another

3 _{VCR). If you have a TV attached to your}

DVD+VCR, you can see the video playing.

The channel number appears on the TV screen.

ꢀ If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select LINE1 or

LINE2.

When you desire the recording to begin, press

Select the desired recording speed (SP or SLP)

3 _{with SP/SLP.}

4 _{DVD+VCR’s REC/ITR (z) once to start.}

ote

Before recording, please confirm the recording start position.

The tape speed will appear on the TV screen.

Press REC/ITR (z) twice.

The menu as illustrated, will appear on the TV screen.

ꢀ Recording will start. (The

indicator will light)

Copying from DVD to VCR

Press REC/ITR (z) repeatedly to select the

5 _{recording time length.}

This unit allows you to copy the contents of a DVD to a

VHS tape.

At the end of the recording, the DVD+VCR will stop

recording and shut off.

ote

ꢀ During Instant Timer Recording, changing the channel

on the DVD+VCR will not be possible.

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “Lock” is

displayed in the display window.

ꢀ You can stop the recording by pressing STOP (x).

INSTANT TIMER RECORD MENU

0H30M ..... 9H00M ➝ 0H00M

INSTANT TIMER RECORD

Insert Disc

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

CHANNEL

SPEED

Length Display

(each additional press of

REC/ITR (z) increases recording

time 30 minutes)

START

NOW

Insert VHS Tape

LENGTH

0H30M

2 _{Insert a blank VHS video tape into the VCR deck.}

Press the COPY button on the unit front panel.

3 _{The DVD will go into Play mode and the VCR will}

go into Record mode.

Checking the Recording Time

Press REC/ITR (z) once to check the recording time.

The recalled setting will automatically return to the TV

screen after 6 seconds.

ꢀ If the DVD disc menu appears, you may need to press

PLAY PLAY (N) manually to begin copying.

ꢀ “COPY” indicator will light.

To extend the Recording Time

The recording time can be extended anytime by press-

Stopping the Copy Process

When the DVD is finished playing, press the VCR button

ing REC/ITR (z).

Subsequent presses result in advancing the recording

time by 30-minute increments.

on the remote control and then press STOP (x) to end

copying.

You must stop the Copy process manually when the DVD

movie ends, or the unit may replay and record over and

over again.

otes

ote

When you stop the DVD playback during copying, the VCR

recording mode stops automatically.

ꢀ If you press PAUSE/STEP (X) during instant timer record-

ing, the DVD+VCR will enter the recording pause mode.

Instant timer recording is cancelled.

ꢀ If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to

normal recording mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

VHS Hi-Fi Stereo System/

MTS Broadcast

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual

(SAP) off-the-air broadcast sound signals. It also

decodes stereo TV sound from local cable companies,

as long as they operate on assigned cable frequencies

and use the EIA-recommended MTS stereo/bilingual TV

This DVD+VCR is equipped with the VHS Hi-Fi audio

sound system for recording and playback. The informa-

tion below gives a brief description of Hi-Fi audio and

how to record and play a tape in the Hi-Fi audio mode.

sound system.

Playback with Hi-Fi Stereo Audio Sound

Multichannel TV Sound Indicator (MTS)

Shows onscreen as illustrated below when

A stereo TV with AUDIO/VIDEO input jacks or a stereo

audio system is required for true stereo playback. To

experience the full and rich stereo sound available with

Hi-Fi recorded tapes, we recommend the connection of

this unit to a home stereo audio system.

SELECT/ENTER is pressed.

ꢀ

One or both of the indicators will light, depending on the

MTS broadcast.

TV screen

STEREO

CH 4

STEREO/SAP

Lights up when a stereo broadcast

is being received.

SAP

Lights up when a SAP BILINGUAL

broadcast is being received.

Set the AUDIO MODE option to HI-FI on the

SETUP menu .

If only STEREO appears on the TV screen.

The DVD+VCR can record in stereo onto the VHS Hi-Fi audio

tracks when the BROADCAST TYPE option is in the STEREO

position. The DVD+VCR will also record mono audio onto the

mono audio track.

Set the AUDIO OUTPUT option to STEREO

If only SAP appears on the TV screen.

Set the BROADCAST TYPE option to SAP.

2 _position.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired

recording mode (STEREO or SAP).

(STEREO) POSITION: The left channel sound (L) is

heard from the left speaker and the right channel sound

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard

from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard

from both speakers.

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which

is used for a second language or additional information.

When the station broadcasts a Second Audio Program,

follow the procedure below to record the SAP.

Insert a video cassette with the safety tab intact.

Set the BROADCAST TYPE option to SAP

2 _{(SETUP menu).}

Do this if only the SAP appears on the TV screen or you

know the program will use the SAP.

Press MENU.

Insert a cassette and press PLAY ( B).

4 _{Adjust volume at your stereo system.}

Press MENU.

Select the desired recording speed (SP or SLP)

4 _{with SP/SLP.}

Select the desired channel. SAP should appear

5 _{on the TV screen.}

Press REC/ITR (z) once

You are now recording the program you see and hear on the

TV.

Press STOP (x) to stop recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Tape Counter Memory Feature

Additional Information

ꢀ

In manual recording, Timer recording, Instant Timer

Recording, playback, or fast forward modes, the DVD+VCR

automatically starts rewinding the tape at the end of the

tape. The cassette will stop at the beginning of the tape and

be ejected, and the DVD+VCR will turn itself off.

Real-Time Counter

Shows length of tape run in hours, minutes, and

seconds. Press CLK/CNT to select the real-time

counter display.

Every press of CLK/CNT changes the TV screen as

illustrated below.

After you have finished using the DVD+VCR, rewind, eject,

and remove the cassette. Place the cassette in its protec-

tive sleeve to protect it from dust. It is not necessary to

rewind the cassette before removing it, but if you do, it will

be ready to play or record the next time you use it.

2:15 AM

CLOCK

0:05:25

COUNTER

REM 1:07

Be sure the DVD+VCR Channel Selector is on the correct

channel you wish to record. The channel that is being

recorded can always be checked by tuning the television to

the DVD+VCR channel (3 or 4) and pressing the TV/VCR

selector to turn the DVD+VCR’s TV indicator off.

REMAINING TIME

ꢀ

Counter changes to “0:00:00” when the cassette is

ejected.

The real-time counter does not operate if nothing is

recorded on the tape.

The real-time counter will not work unless a tape is

inserted.

Do not attempt to hook up more than one television set to

the DVD+VCR for either recording or playback.

Auto Play System

This DVD+VCR features automatic playback.

Load a cassette (with the safety tab removed).

Counter Memory Function

This is useful if there is a section of tape you want to

view immediately after recording or if you want to return

to the same point several times.

ꢀ

The Output Source is changed to VCR mode automatically.

The power turns on automatically and playback begins.

At the end of the tape, the DVD+VCR stops, then rewinds.

Begin recording or playing a tape.

The cassette is ejected after rewinding and the VCR turns

itself off automatically.

Press CLK/CNT repeatedly to display the

2 _{real-time counter on the TV screen.}

LOAD

AUTO

POWER

OFF

At the point that you want locate later, reset the

3 _{real-time counter to “0:00:00” by pressing}

CLEAR.

AUTO

PLAY

AUTO

REWIND

TAPE

EJECT

Continue to play or record.

ote

Auto power off does not function during regular DVD play

mode. (DVD+VCR power stays on.)

Press STOP (x) when recording or playback

5 _finishes.

Press BACKWARD (.).

S-VHS Quasi Playback (SQPB)

6 _{The tape automatically stops when the tape counter}

returns to about “0:00:00”.

ꢀ

This DVD+VCR can play back S-VHS recorded tapes,

however, it cannot make recordings using S-VHS format

tapes.

Tape Remaining

This function shows the remaining time on the tape

during recording or playback.

ꢀ

SQPB is an abbreviation for S-VHS Quasi Playback.

Press CLK/CNT repeatedly until the REM indicator

appears on the TV screen during recording or playback.

ote

The remaining tape length indicator may not be displayed

correctly depending on the condition of the tape and the kind of

the tape (T-140, T-160, or T-210 etc)

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Playing DVDs

Playback Setup DVD

General Features

ote

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

ꢀ Turn on the TV and select the video input source con-

nected to the DVD+VCR.

ꢀ Audio system: Turn on the audio system and select

the input source connected to the DVD+VCR.

^ꢀSet the Output Source to DVD as shown in “Selecting

the Viewing Source” on page 6.

1 /3

Selecting other TITLEs DVD

When a disc has more than one title, you can select

another title as follows:

Press OPEN/CLOSE (Z) to open the disc tray.

ꢀ

Press DISPLAY in Stop mode, then press the

appropriate number buttons (0-9) then press

SELECT/ENTER to select a title number.

Load your chosen disc in the tray, with the label

2 _{facing up.}

When a double-sided DVD is inserted, make sure

the side you want to play is facing down.

Selecting other CHAPTERs

1 /12

Press OPEN/CLOSE (Z) to close the tray.

3 _{“LOAd” appears in the display window, and play-}

back starts automatically. If playback does not start,

press PLAY ( B).

DVD

When a title on a disc has more than one chapter or a

disc has more than one track, you can select another

chapter as follows:

In some cases, the disc menu might appear

instead.

ꢀ Press BACKWARD (.) or FORWARD (>) briefly

during playback to return to the beginning of the

current chapter or to select the next chapter.

^ꢀPress BACKWARD (.) twice briefly to step back to

the previous chapter.

^ꢀTo go directly to any chapter during playback,

press DISPLAY. Use v/V to select C (chapter).

Then, enter the chapter number with the number

buttons (0-9). Then, press SELECT/ENTER.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD which contains a menu.

DVD

Use b/B/v/V buttons to select the title/chapter you

want to view, then press SELECT/ENTER to start

playback.

Press TITLE or DISC MENU to return to the menu

screen.

Slow Motion DVD

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will now go into PAUSE mode.

otes

2 Press BACKWARD (.) or FORWARD (>)

during pause mode.

The DVD+VCR will enter SLOW mode.

ꢀ If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit password

must be entered and/or the disc must be authorized

(see Parental Control, on page 21).

3 Use BACKWARD (.) or FORWARD (>) to

select the required speed: t 1/16, t 1/8, t 1/4, t

1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2

(forward).

ꢀ DVDs may have a Region Code.

ꢀ Your DVD+VCR will not play discs that have a Region

Code different from your DVD+VCR. The Region

Code for this DVD+VCR is 1 (one).

4 To return to playback, press PLAY ( B).

ꢀ Do not keep a fixed image displayed on the screen

for a long time.

Screen Saver

The screen saver picture appears if you leave the

DVD+VCR in Stop mode for about five minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation (Continued)

General Features (Continued)

-:--:--

0:16:57

Time Search DVD

Still Picture and Frame-by-Frame Playback

DVD

The Time Search function allows you to start playing at

any chosen time on the disc.

1 Press DISPLAY during playback. The on-screen dis-

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will go into PAUSE mode.

2 With a DVD, you can advance the picture frame by

frame by pressing PAUSE/STEP (X) repeatedly on

the remote control.

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 Within 10 seconds, use v/V to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

3 To return to playback, press PLAY ( B).

Search DVD

3 Within 10 seconds, use the numbered buttons to

enter the required start time. Enter hours, minutes

and seconds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

Press and hold BACKWARD (.) or FORWARD (>)

for about two seconds during playback.

The DVD+VCR will now go into SEARCH mode.

Press and hold BACKWARD (.) or FORWARD (>)

repeatedly to select the required speed: mX2, mX4,

mX16, mX100 (backward) or MX2, MX4,

MX16, MX100 (forward).

4 Within 10 seconds, press SELECT/ENTER.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

3 To return to playback, press PLAY ( B).

3D SUR

NORM.

3D Surround DVD

Random Karaoke DVD

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

1 Press RANDOM during playback or in Stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

2 To return to normal playback, press RANDOM until

“NORMAL” appears on the TV screen.

1 Press DISPLAY during playback.

ips

2 Use v/V to select the sound icon.

The sound option will be highlighted.

By pressing BACKWARD (.) or FORWARD (>)

during Random playback, the unit selects another title

(track) and resumes Random playback.

3 Use b/B to to select “3D SUR”.

To turn off the 3D Surround effect, select “NORM.”.

ote

This function only works with DVD Karaoke discs.

Zoom DVD

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

TITLE

OFF

CHAPT

Repeat

DVD Video Discs - Repeat Chapter/Title/Off

DVD

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

1 To repeat the currently playing chapter, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

2 To repeat the title currently playing, press REPEAT a

second time.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

2 Use b/B/v/V buttons to move through the zoomed

picture.

The Repeat Title icon appears on the TV screen.

3 Press CLEAR to resume normal playback or return to

the paused image.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

OFF

Repeat A-B DVD

otes

ꢀ The Zoom function may not work for some DVDs.

ꢀ The Zoom function may not work on multi-angle

scenes.

To repeat a sequence in a title:

1 Press A-B at your chosen start point.

A- appears briefly on the TV screen.

2 Press A-B again at your chosen end point.

A-B appears briefly on the TV screen, and the repeat

sequence begins.

3 To cancel the sequence, press A-B.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation (Continued)

General Features (Continued)

ote

The video mode setting only works when the

Progressive Scan option is set to “On” in the Setup

menu.

MARKER SEARCH

1/9

DVD

Marker Search

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

1 During disc playback, press MARKER when playback

reaches the spot that you want to memorize.

The Marker icon will appear on the TV screen briefly.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

Special DVD Features

Checking the contents of DVD Video

discs: Menus

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use b/B/v/V buttons to highlight your selec-

tion, then press SELECT/ENTER.

To Recall a Marked Scene

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, use 1/2 or number button to

select a Marker number that you want to recall.

3 Press SELECT/ENTER.

Playback will start from the Marked scene.

DVD

Title Menu

1 Press TITLE.

4 To remove the MARKER SEARCH menu, press

SEARCH.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

To Clear a Marked Scene

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, use 1/2 or number button to

select a Marker number that you want to erase.

3 Press CLEAR.

3 To remove the title menu, press TITLE again.

DVD

Disc Menu

1 Press DISC MENU.

The disc menu is displayed.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

2 To remove the disc menu, press DISC MENU again.

5 To remove the MARKER SEARCH menu, press

SEARCH.

ꢀ All markers are erased when the disc is ejected.

1 /1

DVD

Camera Angle

If the disc contains sequences recorded from different

camera angles, the angle icon blinks on the TV screen.

You can then change the camera angle if you wish.

DVD

Video Mode Setting

ꢀ With certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

ꢀ

Press ANGLE repeatedly during playback to select a

desired angle.

The number of the current angle appears on the display.

DVD

Changing the Audio Language

1 ENG

ꢀ To change the video mode, press and hold

DISPLAY about 3 seconds during disc playback. The

new video mode number selected is displayed on the

TV screen. Check whether the video quality has

improved. If not, repeat the above procedure until pic-

ture quality is improved.

5.1 CH

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

ABC

1 ENG

DVD

Subtitles

ꢀ Video mode sequence:

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

MODE1 → MODE2 → MODE3 → MODE1

ꢀ If you turn off the power, the video mode will return to

initial default state (MODE1).

ote

Detailed Description of each Video Mode

MODE1 : The source material of the DVD video (film material

or video material) is determined from disc information.

MODE2 : Suitable for playing film based content or video

based material recorded by the progressive scan method.

MODE3 : Suitable for playing video based content with

comparatively little motion.

If appears, the feature at that moment or with that

specific DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3/WMA Disc

Notes on MP3/WMA Recordings

Playing an Audio CD and MP3/WMA Disc

About MP3

MP3

WMA

ꢀ An MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

ꢀ The player can not read an MP3 file that has a file

extension other than “.mp3”.

The DVD Player can play MP3/WMA formatted record-

ings on CD-ROM, CD-R or CD-RW discs.

Before playing MP3/WMA recordings, read the notes on

MP3/WMA Recordings on right.

Insert a disc and close the tray.

Audio CD; Audio CD menu appears on the TV

screen go to step 4.

MP3/WMA disc; The MP3/WMA-JPEG choice

menu appears on the TV screen. Go to step 2

About WMA (Window Media Audio)

ꢀ A WMA file is made using Microsoft audio

compression technology.

ꢀ WMA (Windows Media Audio) offers double the audio

compression of the MP3 format.

MP3 WMA

JPEG

MP3/WMA Disc compatibility with this player is

limited as follows:

Use 3/4to select the MP3/WMA then press

SELECT/ENTER.

The MP3/WMA menu appears on the TV screen.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

1. Sampling Frequency / only at 44.1kHz (MP3),

22.05 - 44.1kHz (WMA)

2. Bit rate / within 32 - 320kbps (MP3),

32 - 128kbps (WMA)

3. CD-R physical format should be “ISO 9660”

4. If you record MP3/WMA files using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD” etc., it is impossible to playback

MP3/WMA files. We recommend that you use “Easy-

CD Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3/WMA files in the

first track. If there is no MP3/WMA file in the 1st

track, it cannot playback MP3/WMA files. If you wish

to playback MP3/WMA files, format all the data in

the disc or use a new one.

6. File names should be named using 8 letters or less

and must incorporate “.mp3” or “.wma” extension

e.g. “********.MP3” or “********.WMA”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files on the disc should be less than

650.

Program

MP3 WMA

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Clear All

OFF

00:00

Use 3/4 to select a folder, and SELECT/ENTER.

3 _{A list of files in the folder appears.}

Use 3/4to select a track then press PLAY (N)

or SELECT/ENTER.

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

This DVD+VCR requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 or WMA files). That require certain pre-existing

conditions (see above) to insure compatible playback.

Program

MP3 WMA

TRACK01

FILE 1

FILE 2

FILE 3

FILE 4

FILE 5

FILE 6

FILE 7

FILE 8

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

Clear All

OFF

Clear All

NORM.

00:00

0: 56: 18

STER.

Customers should also note that permission is

required in order to download MP3/WMA files and

music from the Internet. Our company has no right

to grant such permission. Permission should

always be sought from the copyright owner.

Audio CD Menu

MP3/WMA Menu

If you are in a file list and want to return to the Folder

list, use the 3/4to highlight and press

SELECT/ENTER to return to the previous menu screen.

To stop playback at any other time, press

5 _{STOP (x).}

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3/WMA Disc (Continued)

MP3

WMA

Pause

1 Press PAUSE/STEP (X) during playback.

Repeat A-B

To repeat a sequence.

1 During disc playback, press A-B at your chosen start-

2 To return to playback, press PLAY (N) or press

PAUSE/STEP (X) again.

ing point.

The Repeat icon and “ * ” appears on the menu screen.

MP3

2 Press A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

WMA

Selecting other Tracks

ꢀ Press BACKWARD . or FORWARD > briefly

during playback to go to the next track or to return to

the beginning of the current track.

3 To exit the sequence and return to normal play, press

A-B again.

The Repeat icon and “OFF” appears on the menu screen.

ꢀ Press BACKWARD . twice briefly to step back to

the previous track.

ꢀ For audio CDs, to go directly to any track, enter the

track number using the numbered buttons (0-9) dur-

ing playback.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

MP3

WMA

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu screen.

1 Press DISPLAY or AUDIO during playback.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appear on the menu screen.

2 Use b/B to select the sound icon.

The sound option will be highlighted.

3 Use v/V to select “NORM.”, or “3D SUR”.

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appear on the menu screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

MP3

WMA

1 Press and hold BACKWARD . or FORWARD >

for about two seconds during playback.

The player will now go into SEARCH mode.

2 Press and hold BACKWARD . or FORWARD >

repeatedly to select the required speed: mX2,

mX4, mX8 (backward) or MX2, MX4, MX8

(forward).

Search speed and direction are indicated on the menu

screen.

3 To exit SEARCH mode, press PLAY (N).

MP3

WMA

Random

1 Press RANDOM during playback or when playback

has stopped.

The unit automatically begins Random Playback and

RANDOM or “RAND.” appears on the display window

and menu screen.

2 To return to normal playback, press RANDOM repeat-

edly until RANDOM or “RAND.” disappears from the

display window and menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

JPEG File Operation

JPEG

Selecting other Files

Viewing JPEG Files on a Disc

Press BACKWARD . or FORWARD > once

while viewing a picture to advance to the next file or to

the previous file.

This DVD+VCR can play discs with JPEG files. Before

playing JPEG recordings, read the notes on JPEG

Recordings on right.

Still Picture

Insert a disc and close the tray.

The MP3/WMA-JPEG selection menu appears on

the TV screen.

1 Press PAUSE/STEP (X) while showing a slide show.

The player will now go into PAUSE mode.

2 To return to the slide show, press PLAY (N) or press

PAUSE/STEP (X) again.

MP3 WMA

JPEG

To flip the picture

Press 3/4while showing a picture to flip the

picture horizontally or a vertically.

Use 3/4to select the JPEG then press

2 _{SELECT/ENTER.}

The JPEG menu appears on the TV screen.

To rotate picture

JPEG

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Press 1/2 while showing a picture to rotate the

picture clockwise or counter clockwise.

Notes on JPEG Files

Off

Slide Speed

ꢀ Depending upon the size and number of the JPEG

files, it could take a long time for the DVD player to

read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 2 mega pixels and burn another disc.

Use 3/4 to select a folder, and SELECT/ENTER.

3 _{A list of files in the folder appears.}

Press RETURN to move to the MP3/WMA-JPEG

selection menu.

Tip

If you are in a file list and want to return to the Folder

list, use the 34 buttons on the remote to highlight

ꢀ Total number of files and folders on the disc should

be less than 650.

ꢀ Some disc may be incompatible due to different

recording format or condition of disc.

“

previous menu screen.

and press SELECT/ENTER to return to the

”

ꢀ When you are using software such as “Easy CD

Creator” to burn the jpeg files into the CD-R, ensure

that all the selected files have the “.jpg” extensions

when copying into the CD layout.

If you want to view a particular file, press 3/4to

4 _{highlight a file and press SELECT/ENTER or}

PLAY (N).

Viewing the file proceeding starts.

During viewing a file, press RETURN to move to

the previous menu (JPEG menu).

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

ꢀ If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

ꢀ File names without “.jpg” extension will not be able to

be read by this DVD+VCR. Even though the files are

shown as JPEG image files in windows explorer.

Folder1

JPEG

Picture1

Picture2

Picture3

Picture4

Picture5

Picture6

Picture7

Off

5/32

1024X768

Slide Speed

5/32

1024X768 Picture5.jpg

Tip

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Use 1/2 to highlight the Slide

Speed option then use 3/4 to select the speed you

want to use, and then press SELECT/ENTER.

To stop viewing at any other time, press STOP (x).

5 _{The JPEG menu appears.}

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3

WMA

Programmed Playback

Programmed Playback with Audio CDs

and MP3/WMA Discs

The Program function enables you to store your favorite

Repeat Programmed Tracks

ꢀ To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu screen.

ꢀ To repeat all tracks on the program list, press

REPEAT a second time.

The Repeat icon and “ALL” appear on the menu screen.

ꢀ To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appear on the menu screen.

tracks from any disc in the player memory.

Program can contain 30 tracks.

Press PROGRAM during playback or in the Stop

mode to enter the Program Edit mode.

Erasing a Track from the Program List

The mark will appear to the right of the word Program

on the right side of the menu screen.

1 Press PROGRAM during playback or in the Stop

mode to enter the Program Edit mode.

The

mark will appear.

Note

Press PROGRAM to exit the Program Edit mode;

2 Press 2 to move to the Program list.

3 Use 3/4to select the track that you wish to erase

from the Program list.

the

mark will disappear.

4 Press CLEAR.

The track will be erased from the Program list.

Select a track, then press SELECT/ENTER to

2 _{place the selected track on the Program list.}

Erasing the Complete Program List

Repeat step 2 to place additional tracks on the

3 _{Program list.}

1 Follow steps 1-2 of “Erasing a Track from the

Program List” shown above.

2 Use 3/4to select “Clear All”, then press

SELECT/ENTER.

The complete Program for the disc will be erased.

The programs are also cleared if the disc is ejected.

Program

MP3 WMA

Program

FILE 8

FILE 2

FILE 4

FILE 3

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

FILE 1

FILE 2

FILE 3

FILE 4

FILE 5

FILE 6

FILE 7

FILE 8

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

Clear All

OFF

Clear All

NORM.

00:00

0: 56: 18

STER.

Audio CD Menu

MP3/WMA Menu

Press 2.

The programmed track you selected last is highlighted on

the program list.

Use 3/4to select the track you want to start

5 _playing.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

Press PLAY (H) to start.

Playback begins in the order in which you programmed

the tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Program list

have played once.

To resume normal playback from programmed

playback, press PROGRAM.

Select a track of CD (or MP3/WMA) list and

then press SELECT/ENTER.

“PROG.” indicator disappears from the display window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀ The power cord is disconnected.

ꢀ Plug the power cord into the wall outlet

securely.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The power is on, but

the DVD+VCR does not

work.

ꢀ The TV is not set to receive DVD+VCR

signal output.

ꢀ Select the appropriate video input mode

on the TV so the picture from the

DVD+VCR appears on the TV screen.

No picture.

ꢀ TV/VCR mode for DVD+VCR is set to

TV.

ꢀ Press the TV/VCR button on the remote

control repeatedly to choose VCR

mode. TV indicator disappears from the

display window.

ꢀ The video cable is not connected

securely.

ꢀ Connect the video cable securely.

ꢀ The connected TV power is turned off.

ꢀ Turn on the TV.

No sound.

ꢀ The equipment connected with the

audio cable is not set to receive

DVD+VCR signal output.

ꢀ Select the correct input mode on the

audio receiver so you can listen to the

sound from the DVD+VCR.

ꢀ The audio cables are not connected

securely.

ꢀ Connect the audio cables securely.

ꢀ The power of the equipment connected

with the audio cables is turned off.

ꢀ Turn on the equipment connected with

the audio cables.

ꢀ The Digital Audio Output is set to the

wrong position.

ꢀ Set the Digital Audio Output to the

correct position, then turn on the

DVD+VCR again by pressing POWER.

The playback picture is ꢀ The disc is dirty.

poor.

ꢀ Clean the disc.

ꢀ Tape heads are dirty.

ꢀ Clean video heads.

ꢀ Tape is a rental or was recorded on

another VCR.

ꢀ Use CH/TRK (v/V) for manual tracking

adjustment while tape is playing.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The DVD+VCR does

not start playback.

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

type, color system, and Regional code.)

ꢀ The disc is placed upside down.

ꢀ

Place the disc with the playback side down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is dirty.

ꢀ Clean the disc.

ꢀ The Rating level is set.

ꢀ Cancel the Rating function or change

the rating level.

The remote control

does not work properly.

ꢀ The remote control is not pointed at the

remote sensor of the DVD+VCR.

ꢀ Point the remote control at the remote

sensor of the DVD+VCR.

ꢀ The remote control is too far from the

DVD+VCR.

ꢀ Operate the remote control within 23 ft

(7 m).

ꢀ There is an obstacle in the path of the

remote control and the DVD+VCR.

ꢀ Remove the obstacle.

ꢀ The batteries in the remote control are

dead.

ꢀ Replace the batteries with new ones.

ꢀ This remote control uses the same

buttons for VCR and DVD functions

(ex. PLAY).

ꢀ When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Continued)

Cause

Correction

Symptom

ꢀ Those channels were deleted with the

CH. ADD/DEL option.

ꢀ Use CH. ADD/DEL. to restore channels.

See “Channel Selection” on page 16.

Some channels are

skipped over when

using CH/TRK (v/V

)

ꢀ Antenna or cables are loose.

ꢀ Tighten connections or replace cable.

Picture and sound of

broadcasting channel

are weak or missing.

ꢀ Wrong TUNING BAND option is being

used.

ꢀ Try all TUNING BAND options. See

“Channel Selection” on page 16 for

details.

ꢀ Camcorder is off.

ꢀ Turn camcorder on and operate

properly.

Camcorder image is not

shown.

ꢀ DVD+VCR SOURCE SELECT is not set ꢀ Press INPUT to select LINE input

Camcorder image via

A/V input to DVD+VCR

is not shown on TV

screen.

to LINE1 or LINE2.

channel (LINE1 or LINE2).

ꢀ Clock in DVD+VCR is not set to correct

time.

ꢀ Set clock to correct time. See “Setting

the Clock” on page 17.

Timer recording is not

possible.

ꢀ Timer has been programmed

incorrectly.

ꢀ Reprogram Timer. See “Timer

Recording” on pages 23 and 24.

ꢀ

indicator does not appear after pro-

gramming timer.

ꢀ Reprogram Timer.

ꢀ DVD+VCR is in Timer Recording mode. ꢀ This is the normal indication that the

DVD+VCR is in TIMER mode.

indicator appears

after DVD+VCR is turned

off.

ꢀ TV is not Stereo-compatible.

ꢀ No action is possible.

Stereo Audio Record

and/or Playback is not

present.

ꢀ Broadcast program is not in stereo for-

mat.

ꢀ DVD+VCR A/V Out jacks are not con-

nected to TV A/V In jacks.

ꢀ Make A/V connections. Stereo is

available only via A/V output from

DVD+VCR.

ꢀ DVD+VCR Audio/Video Out is not

selected for viewing at the TV.

ꢀ Select AUX or A/V source as TV input.

ꢀ DVD+VCR BROADCAST TYPE mode is ꢀ Set BROADCAST TYPE mode to

set to SAP or MONO.

STEREO. See “VCR Setup Menu

Options” on page 16.

Moisture Condensation

In locations where moisture condensation may occur:

Moisture condensation can occur:

• When the DVD+VCR is moved from a cold place to a

warm place.

•

Keep the DVD+VCR plugged into an AC power outlet

with POWER On. This will help prevent condensation.

• Under extremely humid conditions.

• When condensation has occurred, wait a few hours

for the DVD+VCR to dry before using it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 19).

Language

Abkhazian

Afar

Code

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

Language

Fiji

Code

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

Language

Lingala

Code

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

Language

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Code

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Finnish

French

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Amharic

Arabic

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Maori

Armenian

Assamese

Aymara

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla 6678

Hebrew

Hindi

Nepali

Telugu

Thai

Bhutani

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Pashto, Pushto 8083

Persian

7065

8076

8084

8185

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Rhaeto-Romance 8277

Romanian

Russian

8279

8285

8377

8365

7168

8382

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Danish

Sanskrit

Dutch

Korean

Kurdish

Laothian

Latin

Scots Gaelic

Serbian

Wolof

English

Xhosa

Esperanto

Estonian

Faeroese

Serbo-Croatian 8372

Yiddish

Yoruba

Zulu

Shona

Sindhi

8378

8368

Latvian, Lettish 7686

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Enter the appropriate code number for the initial setting “Country Code” (See page 21).

Code Country

Andorra

Eritrea

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Seychelles

Sudan

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Spain

Ethiopia

Sweden

Finland

Singapore

Fiji

Lesotho

Saint Helena

Slovenia

Albania

Falkland Islands

Micronesia

Faroe Islands

France

Lithuania

Armenia

Luxembourg

Latvia

Svalbard and Jan Mayen

Islands

Netherlands Antilles

Angola

Libya

Slovak Republic

Sierra Leone

San Marino

Senegal

Antarctica

Argentina

France (European

Territory)

Morocco

Monaco

American Samoa

Austria

Gabon

Moldavia

Great Britain

Grenada

Madagascar

Marshall Islands

Macedonia

Mali

Somalia

Australia

Suriname

Aruba

Georgia

Saint Tome and Principe

Former USSR

El Salvador

Syria

Azerbaidjan

Bosnia-Herzegovina

Barbados

French Guyana

Ghana

Myanmar

Mongolia

Gibraltar

Bangladesh

Belgium

Greenland

Gambia

Macau

Swaziland

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Turks and Caicos Islands

Chad

Burkina Faso

Bulgaria

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

French Southern

Territories

Bahrain

Burundi

Togo

Benin

S. Georgia & S. Sandwich

Isls.

Mauritius

Thailand

Bermuda

Maldives

Tadjikistan

Tokelau

Brunei Darussalam

Bolivia

Guatemala

Guam (USA)

Guinea Bissau

Guyana

MW Malawi

Mexico

Turkmenistan

Tunisia

Brazil

Malaysia

Bahamas

Mozambique

Namibia

Tonga

Bhutan

Hong Kong

Heard and McDonald

Islands

East Timor

Turkey

Bouvet Island

Botswana

New Caledonia (French)

Niger

Trinidad and Tobago

Tuvalu

Belarus

Honduras

Croatia

Norfolk Island

Nigeria

Belize

Taiwan

Canada

Haiti

Nicaragua

Netherlands

Norway

Tanzania

Cocos (Keeling) Islands

Central African Republic

Congo

Hungary

Ukraine

Indonesia

Ireland

Uganda

Nepal

United Kingdom

USA Minor Outlying

Islands

Switzerland

Ivory Coast

Cook Islands

Chile

Israel

Nauru

India

Niue

British Indian Ocean

Territory

New Zealand

Oman

United States

Uruguay

Cameroon

China

Iraq

Panama

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Iran

Peru

Colombia

Iceland

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Costa Rica

Former Czechoslovakia

Cuba

Italy

Jamaica

Jordan

Cape Verde

Christmas Island

Cyprus

Japan

Poland

Kenya

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Kyrgyzstan

Cambodia6

Kiribati

Vanuatu

Czech Republic

Germany

Wallis and Futuna Islands

Samoa

Djibouti

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Palau

Yemen

Denmark

Paraguay

Mayotte

Dominica

Qatar

Yugoslavia

South Africa

Zambia

Dominican Republic

Algeria

Reunion (French)

Romania

Ecuador

Cayman Islands

Kazakhstan

Laos

Russian Federation

Rwanda

Zaire

Estonia

Zimbabwe

Egypt

Saudi Arabia

Solomon Islands

Western Sahara

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

AC 120V, 60 Hz

23W

430 X 97.5 X 293 mm (16.9 x 3.9 x 11.5 inches) (w x h x d)

4.8 kg (10.58 lbs)

5˚C to 40˚C (41˚F to 104˚F)

5 % to 90 %

Power consumption

Dimensions (approx.)

Weight (approx.)

Operating temperature

Operating humidity

Signal system

NTSC

Inputs

ANTENNA IN

VHS VIDEO IN(LINE1, 2)

VHS AUDIO IN(LINE1, 2)

Antenna or CATV input, 75 ohms

1 Vp-p 75 ohms, sync negative, RCA jack x 2

-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2

Outputs

VIDEO OUT

S-VIDEO OUT

1 Vp-p 75 ohms, sync negative

(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1

COMPONENT VIDEO OUT

(PROGRESSIVE SCAN)

Audio output (digital audio)

Audio output (optical audio)

Audio output (analog audio)

RF OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2

0.5 V (p-p), 75 ohms, RCA jack x 1

5 V (p-p), 75 Ω, Optical connector x 1

2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1

Channel 3 or 4

VCR Specifications

Head system

Timer

Tape speed

Four head helical scan azimuth system

12-hour display type with AM, PM

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

12.7 mm

Tape width

Maximum recording time

Rewind time

Antenna

SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)

About 3 minutes (T-120)

75 ohms (VHF/UHF)

VHF output signal

Channel coverage

Frequency range

Signal-to-noise ratio

Dynamic range

Channel separation

Channel 3 or 4 (Switchable)

VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)

20Hz to 20kHz

More than 43dB

More than 88 dB

More than 60 dB

DVD Specifications

Laser system

Frequency response

Semiconductor laser, wavelength 650 nm

DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT jacks only)

Less than 0.008%

More than 95 dB (DVD/CD)

Accessories:

Video cable x 1, Audio cable x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (AAA) x 2

^ꢀDesign and specifications are subject to change without prior notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

ZENITH ELECTRONICS CORPORATION

DVD/VCR XBV342 LIMITED WARRANTY-USA

Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under nor-

mal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original

consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when

used in the United States, excluding U.S. Territories.

WARRANTY PERIOD:

LABOR: 90 DAYS from the Date of Purchase.

PARTS: ONE YEAR from the Date of Purchase.

Repaired or Replacement Units are warranted for the

remaining period of the original warranty.

HOW SERVICE IS HANDLED:

Call 1-800-984-9349 for instructions on getting the defec-

tive unit repaired or replaced.

Please retain dated sales receipt and your box to return

the unit to Zenith for repair or replacement.

Both ways shipping charges will be borne by Zenith during

the Warranty Period. After the Warranty Period, you pay in-

bound shipping charges and Zenith pays return shipping

charges.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO

THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE

EXPRESS WARRANTY PERIOD ABOVE. ZENITH WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDI-

RECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNEC-

TION WITH THE PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED

WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

1. Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance

or failure to maintain, or separate system components; and

2. Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental

specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other nat-

ural causes, unauthorized modification or alteration, incorrect electrical current or voltage, software errors that do not dis-

able functionality, operating software protocols adopted after the date of manufacture or for outside the U.S., institutional

or commercial use, or other causes not arising out of defect in material or workmanship.

3. Therefore, the cost of repair or replacement of such a defective product shall be borne by the consumer.

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

Call 1-800-984-9349 (Monday ~ Friday, 7 AM ~ 7 PM CT)

Retain your dated sales receipt to prove the Date of Purchase as well as your

box for shipping the unit to Zenith, for warranty service.

For Warranty Service

Legible copy of your sales receipt must be submitted with the unit at the time

the unit is returned for warranty service.

For Post Warranty Repair

For repair or replacement after the Warranty Period has expired,

Call 1-800-984-9349 (Monday ~ Friday, 7 AM ~ 7 PM CT)

For Where-to buy, Product Assistance, or

Customer Assistance

Call 1-877-9 Zenith (1-877-993-6484) (Monday ~ Friday, 7 AM ~ 8 PM CT

and Saturday, 8 AM ~ 5 PM CT) and select an appropriate option from the

menu.

Or visit our website at http://www.zenithservice.com

FOR WARRANTY SERVICE:

You must call 1-800-984-9349 (Monday ~ Friday, 7 AM to 8 PM CT) and select appropriate option from the menu to confirm

the product is defective and to obtain Return Authorization (RA). During the Warranty Period, Zenith will send you a return-

shipping label. After you obtain RA for return, please box your unit with a copy of the sales receipt and enough packing materi-

al to ensure undamaged delivery of your product. When you receive the label, place it on the box and call the 800 # in the

instruction for pick-up. When your unit is received, Zenith will repair or replace your unit in accordance with this Limited

Warranty.

ADVANCE SHIPMENT. If replacement unit is available and you want second day delivery, our service representative will ask

for your credit card number. Zenith requires a reserved deposit by credit card as surety for such advance shipment. Your credit

card will not be charged if you return the defective unit in 10 business days. For advance shipment, the return label will come

with the replacement unit sent to you. Please follow boxing and shipping instructions above.

ZENITH ELECTRONICS CORPORATION

2000 MILLBROOK DRIVE

LINCOLNSHIRE, IL 60069

Zenith Part No. 206-3880

GS# 3834RM0060V

Printed in China

Issue O

Download from Www.Somanuals.com. All Manuals Search And Download.

Weider Home Gym WESY85070 User Manual
Western Telematic Modem MT5634 User Manual
Whirlpool Dishwasher ADG 7470 User Manual
Whirlpool Refrigerator WAR488BSL User Manual
Whirlpool Washer Dryer LA77OOXP User Manual
Wolf Appliance Company Cooktop CT36I S User Manual
Yamaha Musical Instrument Amplifier Bass Amplifier User Manual
Yamaha Recording Equipment 337 User Manual
Zanussi Refrigerator ZU 8124 User Manual
Zanussi Washer ZWJ 12591 W User Manual