Installation and Operating Guide | Warranty
Model Number | DVB352 | DVD Player
© Copyright 2003, Zenith Electronics Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and other
areas located near water.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid clean-
ers.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for ven-
tilation and to ensure reliable operation of the product
and to protect it from over-heating. The openings
should never be blocked by placing the product on a
bed, sofa, rug or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered
to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Audio CD and MP3/WMA Operation . . . . . . . . 20-21
Playing an Audio CD or MP3/WMA Disc . . . . . . 20
Notes on MP3/WMA Recordings . . . . . . . . . . . . 20
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Changing Tracks . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Random with MP3/WMA Disc . . . . . . . . . . . 21
ꢀ Random Track/ All/ Off . . . . . . . . . . . . . . . . . 21
ꢀ Random with Audio CD . . . . . . . . . . . . . . . . 21
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Changing Audio Channels . . . . . . . . . . . . . . 21
ꢀ Repeat Track/ Disc/ All/ Off . . . . . . . . . . . . . 21
JPEG Files Operation . . . . . . . . . . . . . . . . . . . . . . 22
Viewing JPEG Files . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Changing Files . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 22
ꢀ To rotate the picture. . . . . . . . . . . . . . . . . . . 22
ꢀ Notes on JPEG Files . . . . . . . . . . . . . . . . . . 22
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 23
Programmed Playback with Audio CD . . . . . . . . 23
Programmed Playback with MP3/WMA Discs . . 23
ꢀ Repeat Programmed Tracks. . . . . . . . . . . . . 23
ꢀ Erasing a Track from the Program List . . . . . 23
ꢀ Erasing the Complete Program List . . . . . . . 23
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel and Display Window . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DVD Connections Panel . . . . . . . . . . . . . . . . . . . . . 9
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10
Optional Equipment Connections . . . . . . . . . . . . 11
Pre-operation . . . . . . . . . . . . . . . . . . . . . . . . . . 12-15
General Explanation. . . . . . . . . . . . . . . . . . . . . . 12
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 12
Pre-operation Settings. . . . . . . . . . . . . . . . . . 13-15
ꢀ Pre-operation Setup. . . . . . . . . . . . . . . . . . . 13
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 15
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 25
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Operation
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . 16-18
Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Exchanging discs during playback. . . . . . . . 16
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
ꢀ Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Exchanging the disc and starting playback. . 16
General Features . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 17
ꢀ Moving to another CHAPTER . . . . . . . . . . . 17
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Still Picture and Frame-by-Frame Playback. 17
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 18
Special DVD Features . . . . . . . . . . . . . . . . . . . . 19
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Changing the Audio Language. . . . . . . . . . . 19
ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 19
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-related terms
Title (DVD only)
Playable Discs
The main film content, accompanying feature content,
additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
Chapter (DVD only)
In addition, this unit can play : DVD-R, DVD RW, CD-R,
or CD-RW discs that contain audio titles, MP3, WMA, or
JPEG files.
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
otes
– Depending on the condition of the recording equip-
ment or the CD-R/RW (or DVD-R/ RW) disc itself,
some CD-R/RW (or DVD-R/ RW) discs cannot be
played on the unit.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Track (Audio CD only)
Sections of a musical piece on an audio CD. Each track
is assigned a track number, enabling you to locate the
track you want.
–
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). The unit may malfunction.
otes on DVDs
Some playback operations of DVDs may be intentionally
fixed by software manufacturers. As this unit plays DVDs
according to disc content designed by the software
manufacturer, some playback features of the unit may
not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs.
Some DVDs made for business purposes may not be
played on the unit.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
1
for playback of region “1” encoded DVD software.
The region code on the labels of some DVD discs indi-
cate which type of player can play those discs. This unit
can play only DVD discs labeled “1” or “ALL”. If you try to
play any other discs, the message “Check Regional
Code” will appear on the TV screen. Some DVD discs
may not have a region code label even though their play-
back is prohibited by area limits.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Precautions
Storing discs
After playing, store the disc in its case.
Handling the unit
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Cleaning discs
When setting up the unit
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Yes
No
Cleaning the unit
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About Symbols
About the
symbol display
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
Section in this manual whose title has one of the
following symbols is applicable only to the disc(s)
represented by the symbol.
For details, please contact your nearest dealer.
Notes on Discs
DVD
CD
DVD
Audio CD.
MP3 disc.
Handling discs
MP3
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
WMA WMA disc.
JPEG Files on Disc.
JPEG
Do not stick paper or tape on the disc.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel and Display Window
POWER
OPEN/CLOSE ( /)
Switches the player ON and OFF.
Opens or closes the disc tray.
STOP ( 9)
Stops playback.
STANDBY indicator
Lights red when the player is in Standby mode (off).
Remote Sensor
Point the DVD Player remote control here.
Display window
Shows the current status of the player.
Disc Tray
Insert a disc here.
DISC SKIP
Moves to the next available disc tray.
PLAY ( 2)
Starts playback.
DISC EXCHANGE
Allows you to change a disc
(other than the one playing) during
playback
PAUSE ( ; )
Pauses playback temporarily /
press repeatedly for frame-by-frame playback.
Reverse SKIP/SCAN (
Q
/
S
)
Go to beginning of current chapter/track or to PREVIOUS chapter/track.
Press and hold for two seconds for a fast reverse search.
Forward SKIP/SCAN (
T
/
R
)
Go to NEXT chapter/track.
Press and hold for two seconds for a fast forward search.
ANGLE Lights when multi angles are
TITLE Indicates current title number
present.
CHP/TRK Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG. Programmed playback active
A light will appear if a disc is in the
disc tray. The current disc tray flash-
es.
DVD
DVD inserted
CD Audio CD inserted
MP3 MP3 or WMA disc
inserted
RANDOM RANDOM
playback active
Indicates repeat
mode
Indicates current player function:
Playback, Pause, etc.
MP3
2
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
1
5
3
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
OPEN/CLOSE
Switches DVD Player ON and OFF.
Opens and closes the disc tray.
DISPLAY
SELECT/ENTER
Accesses On-Screen display.
Acknowledges menu selection.
RETURN
Removes the Setup menu.
b B v V (left/right/up/down)
power
open/close
return
Selects options in a menu.
MENU
TITLE
Accesses menu on a DVD disc.
Displays the disc’s Title menu, if
available.
display
PAUSE/STEP ( X ) •
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
select
enter
• Forward SKIP/SCAN ( > )
Search forward*/ go to next chapter
or track.
menu
title
Reverse SLOW ( t ) •
Reverse slow playback.
• PLAY (H
)
Starts playback.
skip/scan
play
skip/scan
Forward SLOW ( T ) •
• Reverse SKIP/SCAN ( . )
Search backward*/ go to beginning
of current chapter or track or go to
previous chapter or track.
Forward slow playback.
program
clear
STOP ( x ) •
Stops playback.
* Press and hold button for about
two seconds.
0-9 number buttons
Select numbered options in a menu.
audio subtitle
setup
PROGRAM
Enters/exits the program edit mode.
AUDIO •
Selects an audio language (DVD) or
an audio channel (CD).
repeat
a - b
random zoom
CLEAR
marker search disc skip
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
SUBTITLE •
Selects a subtitle language.
ANGLE •
Selects a DVD camera angle if
available
• REPEAT
Repeat chapter, track, group, title, all.
• A-B
Repeat sequence.
SETUP •
Accesses or removes setup menu.
• RANDOM
Plays tracks in random order.
MARKER •
Marks any point during playback.
• ZOOM
Enlarges video image.
SEARCH •
Displays MARKER SEARCH menu.
DISC SKIP •
Moves to the next available disc
tray.
Remote Control Operating Range
Remote Control Battery Installation
Point the remote control at the remote sensor and press
the buttons.
Detach the battery cover on the rear of
the remote control, and insert two R03
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor.
(size AAA) batteries with
aligned correctly. Replace cover.
and
ꢀ Angle: About 30° in each direction of the front of the
remote sensor.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Connections Panel
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
ANALOG AUDIO OUT (Left/Right) 1, 2
Connect to an amplifier, receiver or stereo system.
VIDEO OUT
Connect to a TV with video inputs.
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
AC Power Cord
Plug into the power source.
Do not touch the inner pins of the jacks on the DVD
connections panel. Electrostatic discharge may
cause permanent damage to the unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
®
Progressive Scan (Color Stream pro) connection
ips
ꢀ If your television is high-definition or “digital ready”,
you may take advantage of the DVD Player’s pro-
gressive scan output for the highest video resolution
possible.
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you use the
DVD’s Progressive Scan output.
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
ꢀ For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Optional Equipment Connections” on page 11.
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
1
Connect the DVD Player’s Left and Right AUDIO
OUT jacks to the audio left/right in jacks on the TV
using the supplied audio cables (A).
Caution
2
–
Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
otes
– Set Progressive Scan to “On” in the Setup menu to
use a progressive signal, see page 13.
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
Connecting to a TV
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
Rear of TV
S-VIDEO
INPUT
VIDEO
INPUT
Video connection
COMPONENT VIDEO
AUDIO INPUT
Connect the VIDEO OUT jack on the DVD Player to
Y
Pr
Pb
R
L
L
1
the video in jack on the TV using the supplied video
cable (V).
Connect the DVD Player’s Left and Right AUDIO
2
OUT jacks to the audio left/right in jacks on the TV
using the supplied audio cables (A).
S-Video connection
S
C
A
V
Connect the S-VIDEO OUT jack on the DVD Player
1
to the S-Video in jack on the TV using the supplied
S-Video cable (S).
Connect the DVD Player’s Left and Right AUDIO
2
OUT jacks to the audio left/right in jacks on the TV
using the supplied audio cables (A).
®
Component Video (Color Stream ) connection
Connect the COMPONENT VIDEO OUT/
1
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV with optional Y
Pb Pr cables (C).
Connect the DVD Player’s Left and Right AUDIO
OUT jacks to the audio left/right in jacks on the TV
DVD player Connections Panel
2
using the supplied audio cables (A).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Optional Equipment Connections
DVD player Connections Panel
Connecting to an amplifier equipped with
2-Channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with
2-Channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
X
A
Connect one of the DVD Player’s DIGITAL AUDIO
1
OUT jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital
(coaxial X) audio cable.
R
L
COAXIAL
DIGITAL INPUT
AUDIO INPUT
You will need to activate the player’s digital output.
2
(See “Digital Audio Output” on page 14).
Amplifier (Receiver)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
otes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-operation
Playback Status/Restrictions
General Explanation
This manual gives basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
TITLE
Repeat Title
CHAPT
Repeat Chapter
A
B
Repeat A-B
occurs, the symbol
appears on the TV screen, indi-
OFF
Repeat Off
cating that the operation is not permitted by the DVD
Player or is not available on the disc.
Resume play from this point
Action prohibited or not available
On-Screen Display
General playback status can be displayed on the TV
screen. Some options can be changed on the menu.
otes
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
On-screen display operation
Press DISPLAY during playback.
1
Use 3/4to select a menu option.
2
The selected option will be highlighted.
Use 1/2to change the setting of a menu option.
3
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
DVD
Menu Options
Function (Use 3/4to select desired options)
Selection Method
Title Number
Shows the current title number and total number of
1
/
2
, or
1 /3
1 /12
titles, and skips to the desired title number.
Numbers, SELECT/ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
1
/
2
, or
Numbers, SELECT/ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
0:20:09
Numbers, SELECT/ENTER
Audio language
and Digital Audio
Output mode
1 ENG
D
5.1 CH
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
/
2
, or
AUDIO
Subtitle language
Shows the current subtitles language, and
1 2
, or
SUBTITLE
/
ABC
OFF
1 /1
changes the setting.
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
1
/
2
, or
ANGLE
Sound
Shows the current sound mode, and
changes the setting.
1
/
2
NORM.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-operation (Continued)
Pre-operation Settings
Picture
You can set your own personal preferences on the DVD
player.
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off).
Pre-operation Setup
Press SETUP.
The Setup menu appears.
1
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
16:9 Wide: Select when a 16:9 wide TV is connected.
German
Spanish
Italian
Rating
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
Others
Country Code
Hungarian
Other – – – –
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Use 3/4to select the desired option.
The screen will show the current setting for the
selected option, as well as alternate setting(s).
2
DVD
Progressive Scan
While the desired option is selected, press 2,
then 3/4to select the desired setting.
Progressive Scan Video provides the highest quality pic-
ture with less flickering.
• If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
3
4
5
Press SELECT/ENTER to confirm your selection.
Some options require additional steps.
Press SETUP, RETURN, or PLAY to exit and
remove the Setup menu.
• If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
On.
Language
DVD
Disc Language
Select a language for the disc’s Menu, Audio, and
Subtitle.
Original: The original language set for the disc is selected.
Other: To select another language, use number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 25. If you enter the wrong language
code, press CLEAR.
Off
On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
German
Spanish
Italian
Rating
Country Code
TV Aspect
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
5
Others
Caution
Hungarian
Other – – – –
Once the setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible TV
or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is play-
ing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
Menu Language
Select a language for the Setup menu. This is the menu
you see when you press SETUP.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-operation (Continued)
Sound
Others
DRC, Vocal, and Auto Play settings can be changed.
ꢀ Use 3/4to select the desired option and press
SELECT/ENTER. The setting of the selected option
can be turned On or Off.
Digital Audio Output
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connect the DVD Player’s DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
Disc Audio
Disc Subtitle
Disc Menu
Rating
DRC
On
On
Vocal
Auto Play Off
Country Code
Stream/PCM: Select “Stream/PCM” if you connect the
DVD Player’s DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder
or MPEG decoder.
PCM: Select “PCM” if you connect to a 2-channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format; when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
DOLBY
Disc Audio
Disc Subtitle
Disc Menu
Rating
DIGITAL /PCM
Stream/PCM
PCM
Country Code
Sample Freq.
48 KHz
TV Aspect
Menu Language
96KHz
Progressive Scan
Digital Audio Output
Others
Vocal
Set Vocal to On only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc will mix
into normal stereo sound.
Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz sig-
nals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
DVD
Auto Play
You can set up the DVD Player so a DVD disc automati-
cally starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
ote
The Auto Play function may not work for some DVDs.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-operation (Continued)
Parental Control
DVD
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 26.).
DVD
Rating
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated from
1 to 8, and alternatively, more suitable scenes are avail-
able for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
Code Set
Disc Subtitle
Disc Menu
U
S
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
8
Disc Audio
7
Disc Subtitle
6
Disc Menu
Select Country Code on the Setup menu using
5
Rating
1
the 3/4buttons.
4
Country Code
3
TV Aspect
2 While Country Code is selected, press 2.
2
Menu Language
1
Progressive Scan
Digital Audio Output
Others
Unlock
Change
3 Follow step 3 of “Rating” on left.
4 Select the first character using the 3/4buttons.
Select “Rating” on the Setup menu using the
3/4buttons.
1
Shift the cursor using 2 button and select the
5
6
second character using 3/4buttons.
2 While “Rating” is selected, press 2.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
menu.
When you have not entered a password yet.
3
Enter a 4-digit password using the numbered but-
tons and create a personal 4-digit security pass-
word, then press SELECT/ENTER. Enter the 4-digit
password again and press SELECT/ENTER to veri-
fy.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press SELECT/ENTER.
ote
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below.).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press SELECT/ENTER.
3 Select Change using 3/4buttons then press
SELECT/ENTER.
4 Enter the new 4-digit code, then press
SELECT/ENTER.
5 Enter exactly the same code a second time and veri-
fy by pressing SELECT/ENTER.
6 Press SETUP to exit the menu.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Select a rating from 1 to 8 using the 3/4but-
tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is not
active. The entire disc will play in full.
4
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
If you forget your 4-digit password
If you forgot your password, to clear the current pass-
word, follow the procedure below.
1 Press SETUP to display the Setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared. “P CLr” appears on the
display for a moment.
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
3 Enter a new password as shown above to the left
5
(Rating).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
Playing a DVD
Exchanging discs during playback
ꢀ Press DISC EXCHANGE on the front panel during
playback to open the disc tray.
ꢀ Press DISC SKIP to rotate the disc tray. The carousel
will rotate clockwise one disc at-a-time.
ꢀ Exchange the discs and press DISC EXCHANGE or
OPEN/CLOSE to close the disc tray.
DVD
Playback Setup
ꢀ Turn on the TV and select the video input source con-
nected to the DVD player.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the DVD player.
ote
Press OPEN/CLOSE to open the disc tray.
– The disc tray presently loaded in the play position can
1
not be exchanged.
Load your chosen disc in the tray, with the
2
playback side down.
Skipping discs
Do not load a disc in the
left or right side position.
Press DISC SKIP during playback or in Stop mode.
otes
Center Position
Tray
– When DISC SKIP is pressed, the disc tray rotates and
playback begins from the beginning of the next disc.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
• Discs can be loaded one at-a-time. Press
DISC SKIP to rotate the carousel.
– When DISC SKIP is pressed during playback of disc
5, playback of disc 1 will start.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
3
Exchanging the disc and starting playback
In some cases, the disc menu might appear
instead.
1.Press OPEN/CLOSE during playback or in Stop
mode.
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2.Exchange the disc.
3.Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that is in front).
If a menu screen is displayed
A menu screen may be displayed first after loading a
DVD with menus.
DVD
Use the 1 234 buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start play-
back.
Press TITLE or MENU to return to the menu screen.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 15).
– DVDs may have a Region Code.
Your player will not play discs that have a Region
Code different from your player. The region code for
this player is 1 (one).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation (Continued)
General Features
Still Picture and Frame-by-Frame Playback
DVD
1.Press PAUSE/STEP during playback.
The player will go into PAUSE mode.
2.You can advance the picture frame-by-frame by press-
ing PAUSE/STEP repeatedly on the remote control.
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
DVD
Slow Motion
DVD
Changing TITLEs
1 /3
1.Press SLOW t or T during playback.
The DVD player will enter SLOW mode.
When a disc has more than one title, you can move to
another title as follows:
ꢀ Press DISPLAY then use the appropriate numbered
button (0-9) to select a title number.
2.Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3.To exit slow motion mode, press PLAY.
Changing CHAPTERs
Karaoke DVD
Random
1 /12
DVD
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
RANDOM or “RAND.” appears on the display window
and menu screen.
If a title on a disc has more than one chapter, you can
move to another chapter as follows:
ꢀ Press SKIP/SCAN . or > briefly during
playback to select the next chapter or to return to the
beginning of the current chapter.
2 To return to normal playback, press RANDOM repeat-
edly until RANDOM or “RAND.” disappears on the dis-
play window and menu screen.
ꢀ Press . twice briefly to step back to the previous
chapter.
ꢀ To go directly to any chapter during DVD playback,
press DISPLAY. Then, use 3/4to select the chapter
icon. Then, enter the chapter number using the num-
bered buttons (0-9).
ip
By pressing SKIP/SCAN > during Random playback,
the unit selects another title and resumes Random play-
back.
ote
Press two-digit numbered buttons (0-9) in rapid
succession. For example, press 0, 2 instead of pressing
only 2.
ote
This function only works with DVD Karaoke discs.
DVD
Search
1.Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2.Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
3.To exit SEARCH mode, press PLAY.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation (Continued)
DVD
Repeat A-B
General Features (Continued)
A
*
A
B
OFF
DVD
Zoom
To repeat a sequence in a title:
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1.Press A-B at your chosen start point.
“ A * ” appears briefly on the TV screen.
1.Press ZOOM during playback or still playback to acti-
vate the Zoom function.
2.Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
sequence begins (“A
sB” appears the display window).
3.To cancel the sequence, press A-B.
2.Use the 1 234 buttons to move through the zoomed
picture.
TITLE
CHAPT
ALL
OFF
DVD
Repeat
3.Press CLEAR to resume normal playback or return to
the paused image.
DVD Video Discs - Repeat Chapter/Title/All/Off
1.To repeat the chapter currently playing, press REPEAT.
The Repeat Chapter icon appears on the TV screen.
ote
ꢀ The zoom function may not work for some DVDs.
2.To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
DVD
Marker Search
3.To repeat entire all disc contents, press REPEAT a
third time.
MARKER SEARCH
1/9
The Repeat All icon appears on the TV screen.
You can start playback from a memorized point. Up to
nine Marker points can be memorized.
4.To exit Repeat mode, press REPEAT a fourth time.
The Repeat Off icon appears on the TV screen.
To enter a marker point, follow these steps.
0:20:09
-:--:--
DVD
Time Search
1.During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Time Search function allows you to start playing at
any chosen time on the disc.
The Marker icon will appear on the TV screen briefly.
1.Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2.Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
2.Within 10 seconds, use 3/4to select the Time
Search icon on the on-screen display.
The “-:--:--” appears in the Time Search box.
1.During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
3.Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and
2.Within 10 seconds, use 1/2 to select a Marker
number that you want to recall.
seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
3.Press SELECT/ENTER.
Playback will start from the Marked scene.
4.To remove the MARKER SEARCH menu, press
SEARCH.
4.Within 10 seconds, press SELECT/ENTER to confirm
the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
To Clear a Marked Scene
1. During disc playback, press SEARCH.
3D SUR
NORM.
The MARKER SEARCH menu will appear on the screen.
DVD
3D Surround
2. Use 1/2 to select the Marker number that you want
This DVD player can produce a 3D Surround effect,
which simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
to erase.
3. Press CLEAR.
The Marker number will be erased from the list.
4. Repeat steps 2 and 3 to erase additional Marker
numbers.
1.Press DISPLAY during playback.
5. To remove the MARKER SEARCH menu, press
2.Use 3 or 4 to select the sound option.
The sound option will be highlighted.
SEARCH.
3.Use 1 or 2 to to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM”.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation (Continued)
DVD
Video Mode Setting
DVD
Special DVD Features
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
Checking the Contents of DVD Video
Discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then, use
the appropriate number button to select an option. Or,
use the 1 234 buttons to highlight your selection, then
press SELECT/ENTER.
ꢀ To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode number selected is displayed on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
DVD
Title Menu
1.Press TITLE.
ꢀ Video mode sequence:
If the current title has a menu, the menu will appear on the
screen. Otherwise, a disc menu may appear.
MODE1
MODE2
MODE3
MODE1
→
→
→
ꢀ If you turn off the power, the video mode will return to
initial default state (MODE1).
2.The menu can list camera angles, spoken language,
subtitle options, and chapters for the title.
3.To remove the title menu, press TITLE again.
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material or
video material) is determined from disc information.
DVD
Disc Menu
MODE2: Suitable for playing film based content or video based
material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with compar-
atively little motion.
1.Press MENU.
The disc menu is displayed.
2.To remove the disc menu, press MENU again.
1 /1
DVD
Camera Angle
ote
The video mode setting only works when the Progressive
Scan mode is set to “On” in the Setup menu.
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
ꢀ Press ANGLE repeatedly during playback to select a
desired angle.
Screen Saver
The screen saver appears if you leave the DVD Player
in Stop mode for about five minutes.
The number of the current angle appears on the display.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
DVD
Changing the Audio Language
1 ENG
D
5.1 CH
Press AUDIO repeatedly during playback to hear a dif-
ferent audio language or audio track.
ABC
1 ENG
DVD
Subtitles
Press SUBTITLE repeatedly during playback to see the
different subtitle languages available.
ote
If
appears, the feature is not available on the disc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Operation
Playing an Audio CD or MP3/WMA
Notes on MP3/WMA Recordings
About MP3
CD
MP3
WMA
Disc
ꢀ A MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. Files that
have the “.mp3” file extension are called “MP3 files”.
ꢀ The player can not read a MP3 file that has a file
extension other than “.mp3”.
The DVD Player can play audio CDs. Also, the DVD
Player can play MP3/WMA formatted recordings on
CD-ROM, CD-R, or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
About WMA (Window Media Audio)
ꢀ A WMA file is Microsoft audio compression
technology.
ꢀ WMA (Windows Media Audio) offers double the audio
compression of the MP3 format.
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
1
MP3 WMA
MP3/WMA Disc compatibility with this player is
limited as follows:
JPEG
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
Use 3/4to select the MP3/WMA then press
SELECT/ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
2
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using software which
cannot create a FILE SYSTEM, for example “Direct-
CD” etc., it is impossible to playback MP3/WMA
files. We recommend that you use “Easy-CD
Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.mp3” or “********.wma”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
Program
MP3/WMA
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Clear All
OFF
2
00:00
1
Use 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
3
4
Use 3/4to select a track then press PLAY or
SELECT/ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). They require certain pre-existing
conditions (see above) to insure compatible playback.
Program
CD
Program
MP3/WMA
1
2
3
4
5
TRACK 1.mp3
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
TRACK 07
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Clear All
OFF
Clear All
NORM.
2
3
0: 56: 18
STER.
00:00
1
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should always
be sought from the copyright owner.
Audio CD Menu
MP3/WMA Menu
ip
If you are in a file list and want to return to the Folder
list, use the 3/4to highlight and press
SELECT/ENTER to return to the previous menu screen.
5 To stop playback at any other time, press STOP.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Operation (Continued)
CD
MP3
CD
WMA
Pause
Random With Audio CD
1.Press PAUSE/STEP during playback.
1.Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
“RANDOM(1-3)” appears in the display window.
• RANDOM1: Plays all the tracks on a single disc in random
order and then stops.
• RANDOM2: Plays all the tracks on current disc in
random order and then plays all the tracks on each suc-
ceeding disc in random order and then stops.
2.To return to playback, press PLAY or press
PAUSE/STEP again.
CD
MP3
WMA
Changing Track
ꢀ Press SKIP/SCAN . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
• RANDOM3: Plays 2 tracks randomly from a disc and then
plays 2 tracks randomly from a different disc until all tracks
on all discs have been played.
ꢀ Press SKIP/SCAN . twice briefly to step back to
the previous track.
2.To return to normal playback, press RANDOM until
“RANDOM” disappears from the display window.
ꢀ Listening an audio CD, to go directly to any track,
enter the track number using the numbered buttons
(0-9) during playback.
CD
Repeat A-B
To repeat a sequence.
1.During disc playback, press A-B at your chosen start
CD
MP3
WMA
Search
point.
1.Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
The Repeat icon and “ * ” appear on the menu screen.
A
2.Press A-B again at your chosen end point.
The Repeat icon and “A B” appear on the menu screen, and
the sequence begins to play repeatedly.
2.Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3.To exit the sequence and return to normal play, press
A-B again.
The Repeat icon and “OFF” appear on the menu screen.
CD
3.To exit SEARCH mode, press PLAY.
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
MP3
WMA
Random with MP3/WMA Disc
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
RANDOM or “RAND.” appears on the display window
and menu screen.
1.Press DISPLAY during playback.
2.Use 1 or 2 to select the sound option.
The sound option will be highlighted.
2 To return to normal playback, press RANDOM repeat-
edly until RANDOM or “RAND.” disappears on the dis-
play window and menu screen.
3.Use 3 or 4 to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM”.
MP3
WMA
Repeat Track/All/Off
CD
Changing Audio Channels
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
CD
Repeat Track/Disc/All/Off
The Repeat icon and “ALL” appears on the menu screen.
1.To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appear on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
2.To repeat all tracks on a disc, press REPEAT a
second time.
The Repeat icon and “DISC” appear on the menu screen.
3.To repeat entire all disc contents, press REPEAT third
time.
The Repeat icon and “All” appears on the menu screen.
4.To cancel Repeat mode, press REPEAT a fourth time.
The Repeat icon and “OFF” appear on the menu screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG File Operation
JPEG
Changing Files
While viewing a picture, press SKIP/SCAN . or >
once to advance to the next file or return to the previous
file.
Viewing JPEG Files
This DVD Player can play discs with JPEG files. Before
playing JPEG files, read the notes on JPEG files on
right.
Still Picture
Insert a disc and close the tray.
1.Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2.To return to the slide show, press PLAY or press
PAUSE/STEP again.
1
The MP3/WMA-JPEG choice menu appears on the
TV screen.
MP3 WMA
JPEG
To flip the picture
Use 3/4while viewing a picture to flip the
Use 3/4to select the JPEG option then press
SELECT/ENTER.
The JPEG menu appears on the TV screen.
2
picture horizontally or a vertically.
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
To rotate the picture
Use 1/2 while viewing a picture to rotate the
picture clockwise or counter clockwise.
Off
Slide Speed
Notes on JPEG Files
Use 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
ꢀ Depending on the size and number of the JPEG files,
it could take a long time for the DVD player to read
the disc’s content. If you don’t see an on-screen dis-
play after several minutes, some of the files are too
big — reduce the resolution of the JPEG files to less
than 2 mega pixels and burn another disc.
3
ip
If you are in a file list and want to return to the Folder
list, use the 34 buttons on the remote to highlight
ꢀ Total number of files and folders on the disc should be
less than 650.
“
and press SELECT/ENTER to return to the
previous menu screen.
”
ꢀ Some discs may be incompatible due to different
recording format or condition of the disc.
If you want to view a particular file, use 3/4to
highlight a file and press SELECT/ENTER or
PLAY.
Viewing the file function starts.
During viewing a file mode, press RETURN/
DISPLAY to go back to the previous menu
(JPEG menu).
Press TITLE to move to the next page.
Press MENU to move to the previous page.
ꢀ When you are using software such as “Easy CD
Creator” to burn jpeg files on a CD-R, ensure that all
the selected files have the “.jpg” extension before
copying into the CD layout.
4
ꢀ If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
ꢀ File names without “.jpg” extension will not be able to
be read by this DVD player, even though the files are
shown as JPEG image files in Windows Explorer.
Folder1
JPEG
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768 Picture5.jpg
Off
5/32
1024X768
Slide Speed
ip
There are several viewing Slide Speed options: Fast,
Normal, Slow, and Off. Use 1/2 to highlight the Slide
Speed then use 3/4 to select the option you want to
use, and then press SELECT/ENTER.
To stop viewing at any other time, press STOP.
The JPEG menu appears.
5
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
MP3
WMA
Programmed Playback
The Program function enables you to store your favorite
tracks from any disc in the player’s memory.
Programmed Playback with MP3/WMA
discs
Program can contain 30 tracks.
Follow step 1 of “Audio CD Programmed
Playback” on left.
1
2
3
Audio CD Programmed Playback
Select a track, then press SELECT/ENTER to
place the selected track on the Program list.
Press PROGRAM during playback or in the Stop
mode to enter the Program Edit mode.
1
E
The
mark will appear to the right of the word Program
Repeat step 2 to place additional tracks on the
Program list.
on the right side of the menu screen.
E
Program
TRACK 8.mp3
MP3/WMA
Note
TRACK 1.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Press PROGRAM to exit the Program Edit mode.
E
The
mark will disappear.
Clear All
OFF
Move to the Disc number selection column by
2
00:00
3
2
pressing 3 repeatedly.
MP3/WMA Menu
3 Select an audio disc number using 1/2.
Follow steps 6-9 of “Audio CD Programmed
Playback” on left.
4
Select a track, then press SELECT/ENTER to
4
place the selected track on the Program list.
Repeat Programmed Tracks
ote
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appear on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and “ALL” appear on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appear on the menu screen.
You must select an audio CD disc number.
If selected track is from a different kind of disc (DVD or
MP3 etc.), the track is skipped during programmed
playback.
Repeat steps 2-4 to place additional tracks on
5
the Program list.
Erasing a Track from the Program List
1.Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the Stop mode to enter the
Program Edit mode.
E
CD
1
Program
3
2
4
5
2
2
1
3
TRACK 12
TRACK 08
TRACK 10
TRACK 01
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
TRACK 07
E
The
mark will appear.
Clear All
NORM.
2.Press 2 to move to the Program list.
3.Use 3/4to select the track that you wish to erase
from the Program list.
4.Press CLEAR.
The track will be erased from the Program list.
3
0: 56: 18
STER.
Audio CD Menu
Press 2.
The programmed track you selected last is highlighted on
the program list.
6
7
Erasing the Complete Program List
1.Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2.Use 3/4to select “Clear All”, then press
SELECT/ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
Use 3/4to select the track you want to start
playing.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
Press PLAY to start.
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
8
9
To resume normal playback from programmed
playback, select a track from the CD track list
and then press SELECT/ENTER.
“PROG.” indicator disappears from the menu screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following troubleshooting chart for the possible cause of a problem before contacting service.
Possible Cause
Solution
Problem
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall power
outlet securely.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window lights.)
The power is on, but
the DVD player does
not work.
ꢀ The TV is not set to receive DVD signal
output.
ꢀ Select the appropriate video input
source on the TV so the picture from the
DVD player appears on the TV screen.
No picture.
ꢀ The video cable is not connected
ꢀ Connect the video cable securely.
securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive DVD
signal output.
ꢀ Select the correct input source on the
audio receiver so you can listen to the
sound from the DVD player.
ꢀ The audio cable is not connected
ꢀ Connect the audio cable securely.
securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
The playback picture is ꢀ The disc is dirty.
ꢀ Clean the disc.
poor.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
lights.)
The DVD player does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional Code.)
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ A Lock level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor on the DVD player.
ꢀ Point the remote control at the remote
sensor on the DVD player.
ꢀ The remote control is too far from the
DVD player.
ꢀ Operate the remote control within 23 ft
(7 m).
ꢀ There is an obstacle between the remote ꢀ Remove the obstacle.
control and the DVD player.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the pre-operation settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 13).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Sanskrit
Danish
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Country Code List
Enter the appropriate code number for the pre-operation setting “Country Code” (See page 15).
Code Country
Code Country
Code Country
Code Country
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
HN
HR
HT
HU
ID
IE
IL
IN
IO
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
US
UY
UZ
VA
VC
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VE
VG
VI
Jordan
Japan
Kenya
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
Cayman Islands
Kazakhstan
Laos
Lebanon
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
Power consumption
Dimensions (Approx.)
Weight (Approx.)
Operating temperature
Operating humidity
AC 120 V, 60 Hz
14W
16.9 X 3.2 X 16.2 inches (430 x 80 x 410 mm) (w x h x d)
11.2 lbs (5.1 kg)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
System
Laser
Semiconductor laser, wavelength 650 nm
NTSC
Signal system
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 Ω, negative sync, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output (digital audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Accessories
S-Video cable . . . . . . . . . . . . . . . . . . . . .1
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2
ꢀ Design and specifications are subject to change without prior notice.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ZENITH ELECTRONICS CORPORATION
DVD PLAYER DVB352 LIMITED WARRANTY - USA
Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under
normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Installation”) of
original installation of the product. This warranty is good only to the original purchaser of the product and effective only when
used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 DAYS from the Date of Purchase.
Call 1-877-993-6484 for instructions on getting the defective
unit repaired or replaced.
Please retain dated sales receipt and your box to return the
PARTS: One Year from the Date of Purchase.
unit to Zenith for repair or replacement.
Both ways shipping charges will be borne by Zenith during the
Warranty Period. After the Warranty Period, you pay in-bound
shipping charges and Zenith pays return shipping charges.
Repaired or Replacement Unit is warranted for the remaining
period of the original warranty.
Visit our website at http://www.zenithservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITA-
TION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY
IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD
ABOVE. ZENITH WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES OF ANY
KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNECTION WITH THE PRODUCT. SOME STATES DO NOT
ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
ꢀ Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance
or failure to maintain, or separate system components; and
ꢀ Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental
specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other
natural causes, unauthorized modification or alteration, incorrect electrical current or voltage, signal reception or input, soft-
ware not licensed directly by Zenith, software errors that do not disable functionality, operating and software protocols adopt-
ed after the date of manufacture or for outside the US, institutional or commercial use, or other causes not arising out of
defect in material or workmanship.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
Call 1-877-9Zenith (1-877-993-6484) (Monday~ Friday, 7 AM ~ 8 PM CT;
and Saturday, 8 AM ~ 5 PM CT) and select appropriate options from the menu.
For nearest Authorized Service Center,
Where to buy, Product Assistance, or
Customer Assistance
Or visit our website at http://www.zenithservice.com
FOR WARRANTY SERVICE:
You must call 1-877-993-6484 (Monday~ Friday, 7 AM to 8 PM CT; and Saturday, 8 AM ~ 5 PM CT) and select appropriate
options from the menu to confirm the product is defective and to obtain a Return Authorization (RA). During the Warranty
Period, Zenith will send you a return-shipping label. After you obtain an RA for return, please box your unit with a legible
copy of the sales receipt and enough packing material to ensure undamaged delivery of your product. When you receive the
label, place it on the box and call the 800 # in the instructions for pick-up. When your unit is received, Zenith will repair or
replace your unit in accordance with this Limited Warranty.
ADVANCE SHIPMENT. If a replacement unit is available and you want second day delivery, our service representative will
ask for your credit card number. Zenith requires a reserved deposit by credit card as surety for such advance shipment. Your
credit card will not be charged if you return the defective unit in 10 business days. For advance shipment, the return label will
come with the replacement unit sent to you. Please follow boxing and shipping instructions above.
ZENITH ELECTRONICS CORPORATION
2000 MILLBROOK DRIVE
LINCOLNSHIRE, IL 60069
Zenith Part No. 206-3881
GS# 3835RS0060B
Printed in China
Issue O
Download from Www.Somanuals.com. All Manuals Search And Download.
|