EN
User manual
2
Washing Machine
ZWS 568
ZWS 588
Download from Www.Somanuals.com. All Manuals Search And Download.
• Always be sure, that there is no water leakage from
hoses and their connections after the installation.
• If the appliance is installed in a location subject tofrost,
please read the “dangers of freezing” chapter.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or com-
petent person.
Child safety
• This appliance is not intended for use by person (in-
cluding children) with reduced physical sensory or
mental capabilities or lack of experience and knowl-
edge unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
• The packaging components (e.g. plastic film, poly-
styrene) can be dangerous to children - danger of suf-
focation! Keep them out of children’s reach
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or com-
petent person.
• Keep all detergents in a safe place out of children’s
reach.
• Make sure that children or pets do not climb into the
drum. To prevent children and pets becoming trapped
inside the drum this machine incorporates a special
feature.
Use
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which it
was designed.
• Only wash fabrics which are designed to be machine
washed. Follow the instructionsoneachgarmentlabel.
• Do not overload the appliance. See the Washing Pro-
gramme Table.
• Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or
torn articles and treat stains such as paint, ink, rust,
and grass before washing. Underwired bras must NOT
be machine washed.
• Garments which have been in contact with volatile pe-
troleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment
before placing in the machine.
• Never pull the power supply cable to remove the plug
from the socket; always take hold of the plug itself.
To activate this device, ro- To disable this device and
tate the button (without
pressing it) inside the
restore the possibility of
closing thedoor, rotatethe
door clockwise until the button anti-clockwise un-
groove is horizontal. If
necessary use a coin.
til the groove is vertical.
• Never use the appliance if the power supply cable, the
control panel, the working surface or the base are
damaged so that the inside of the washing machine is
accessible.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Product description
1
2
3
4
5
6
Detergent dispenser drawer
Control panel
Door opening handle
Rating plate
Drain pump
Adjustable feet
1
2
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for prewash and
soak phase or for stain remover used during the stain
action phase (if available). The prewash and soak deter-
gent is added at the beginning of the wash programme.
The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent used for
main wash. If using liquid detergent pour it just before
starting the programme.
Compartment for liquid additives (fabric softener,
starch).
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer. Any fabric softener or
starching additives must be poured into the compartment
before starting the wash programme.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights
and the display. These are presented by relevant numbers on the following pages.
1
2
3
4
5
6
7
1
2
3
4
Programme selector dial
Temperature selector dial
SPIN reduction button
OPTIONS button
5
6
7
EXTRA RINSE button
START/PAUSE button
Indicator Pilot Light
Table of symbols
Cold water
Rinse Hold
Programme and temperature selector dials, spin speed button and available options
Programme Selector Dial
Rinse hold
Itallowsyoutoswitchtheapplianceon/offand/ortoselect By selecting this function the water of the last rinse is not
a programme.
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the
water. To empty out the water, please read the paragraph
«At the end of the programme».
Temperature selector dial
This dial allows you to select the temperature more suit-
able to the laundry to be washed.
By selecting the position
cold water.
Easy Iron
the machine will wash with
By selecting this option the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform some additional
rinses in some programmes. On cotton programmes the
maximum spin speed is reduced automatically.
Available options:
Spin Reduction
By pressing this button you can change the spin speed of
the selected programme.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Super Quick
Indicator pilot light (7)
Short cycle for lightly soiled items or for laundry which
needs only freshening up. We recommend you to reduce
the fabrics loading.
The light 7.1 illuminates
after pressing button 6 .
The light 7.2 is on when
the machine is rinsing or
spinning phase.
The light 7.3 illuminates at
the end of the washing cy-
cle.
Extra Rinse
This appliance is designed to save energy. If it necessary
to rinse the laundry using an extra quantity of water (extra
rinse), select this option. Some additional rinses will be
performed. This option is recommended for people who
are allergic to detergents, and in areas where the water is
very soft.
Start Pause
This button allows you to start or to interrupt the selected
programme.
First use
• Ensure that the electrical and water connections
comply with the installation instructions.
• Remove the polystyrene block and any material from
the drum.
• Pour 2 liters of water into the main wash compartment
of the detergent drawer in order to activate the
ECO valve. Then run a cotton cycle at the highest tem-
perature without any laundry in the machine, to remove
any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment and start the machine.
Daily use
Load the laundry
Measure out the detergent and the fabric softener
Open the door by carefully
pulling the door handle
outwards. Place the laun-
dry in the drum, one item
at a time, shaking them out
as much as possible.
Close the door.
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the
main wash compartment
or in the appropriate com-
partment if the selected programme/option it requires
(see more details in "Detergent dispenser drawer").
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
«MAX» mark in the drawer). Close the drawer gently.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
If an incorrect option is selected, the red pilot light of the
button 6 blinks 3 times.
Select the required programme by turning the
programme selector dial (1)
Turn the programme selector dial to the required pro-
gramme. The washing machine will automatically select
the maximum spin value provided for the programme you
have chosen. You can change this value by pressing the
corresponding button. The green pilot light of the button
6 starts to flash.
The selector dial can be turned either clockwise or coun-
terclockwise. Turn to position « O » to reset programme/
Switching the machine off.
Altering an option or a running programme
It is possible to change some options before the pro-
gramme carries them out.
Before you make any change, you must PAUSE the ap-
pliance by pressing the button 6 .
Changing a running programme is possible only by re-
setting it. Turn the programme selector dial to O and then
to the new programme position. Start the new programme
by pressing the button 6 again. The washing water in the
tub will be not emptied out.
At the end of the programme the selector dial must be
turned to position O, to switch the machine off.
Interrupting a programme
Caution! If you turn the programme selector dial to
another programme when the machine is working,
the red pilot light of button 6 will blink 3 times to indicate
a wrong selection. The machine will not perform the new
selected programme.
Press the button 6 to interrupt a programme which is
running, the corresponding green pilot light starts blink-
ing.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to to cancel a programme which
is running. Now you can select a new programme.
Select the required temperature by turning the
temperature selector dial (2)
Turn clockwise this dial to select the more convenient to
your laundry washing temperature.
Opening the door
After the programme has started the door is locked. If, for
any reason, you need to open it, set firstly the machine to
PAUSE by pressing the button 6 . After a few minutes it
will be possible to open the door.
If the door remains locked, this means that the machine
is already heating or that the water level is too high. In
any case, do not try to force the door!
If you cannot open the door but you need to open it you
have to switch the machine off by turning the selector dial
to O . After a few minutes the door can be opened (pay
attention to the water level and temperature!) .
After closing the door, it is necessary to select the pro-
gramme and options again and to press button 6 .
Select the available options by pressing buttons 3,
4 and 5
Depending on the programme, different functions can be
combined. These must be selected after choosing the de-
sired programme and before starting the programme.
When these buttons are pressed, the corresponding pilot
lights illuminate. When they are pressed again, the pilot
lights go out. If an incorrect option is selected, the inte-
grated red pilot light of the button 6 flashes for 3 times.
For the compatibility among the washing pro-
grammes and the options see chapter «Washing
Programmes».
At the end of the programme
Start the programme by pressing button 6
The machine stops automatically. The pilot light of button
6 and the pilot light corresponding to the just finished
washing phase go off. The light 7.3 illuminates.
If a programme or an option that ends with water left in
the tub has been selected, the light 7.3 illuminates but the
door remains locked to indicate that the water must be
emptied out before opening the door.
Follow the below instructions to empty out the water:
1. Turn the programme selector dial to O .
2. Select the draining or spinning programme.
To start the selected programme, press the button 6 , the
corresponding green pilot light stops blinking. The ap-
pliance starts operating and the only pilot light corre-
sponding to the running phase stays on.
To interrupt a programme which is running, press the
button 6 : the corresponding green pilot light starts blink-
ing.
To restart the programme from the point at which it was
interrupted, press the button 6 again .
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Reduce the spin speed if needed, by pressing the
relevant button.
4. Press button 6 .
At the end of the programme, the door can be now opened.
Turn the programme selector dial to O to switch the ma-
chine off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant smells.
Helpful hints and tips
1)
Sorting out the laundry
Ball point pen and glue: moisten with acetone , lay the
garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains
with methylated spirits. Treat any residual marks with
bleach.
Red wine: soak in water and detergent, rinse and treat with
acetic or citric acid, then rinse. Treat any residual marks
with bleach.
Follow the wash code symbols on each garment label and
the manufacturer’s washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates, wool-
lens.
Before loading the laundry
Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should
therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or
detergent paste.
Ink: depending on the type of ink, moisten the fabric first
1)
with acetone , then with acetic acid; treat any residual
marks on white fabrics with bleach and then rinse thor-
oughly.
Tar stains: first treat with stain remover, methylated spirits
or benzine, then rub with detergent paste.
Detergents and additives
Good washing results also depend on the choice of de-
tergent and use of the correct quantities to avoid waste
and protect the environment.
Although biodegradable, detergents contain substances
which, in large quantities, can upset the delicate balance
of nature.
The choice of detergent will depend on the type of fabric
(delicates, woollens, cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine detergents may
be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C max) and
woollens
• liquid detergents, preferably for low temperature wash
programmes (60°C max) for all types of fabric, or spe-
cial for woollens only.
The detergent and any additives must be placed in the
appropriate compartments of the dispenser drawer before
starting the wash programme.
Treat curtains with special care. Remove hooks or tie them
up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and
detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint: moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Dried grease stains: moisten with turpentine, lay the gar-
ment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing
product used cold. Be careful with rust stains which are
not recent since the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast
coloureds only).
If using liquid detergents, a programme without prewash
must be selected.
Grass: soap lightly and treat with bleach (whites and fast
coloureds only).
1) do not use acetone on artificial silk
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Your appliance incorporates a recirculation system which • the laundry is lightly soiled
allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer .
• large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply com-
pany, or from your local authority. If the water hardness
degree is medium or high we suggest you to add a water
softenerfollowingalwaysthemanufacturer’sinstructions.
When the degree of hardness is soft, readjust the quantity
of the detergent.
Quantity of detergent to be used
The type and quantity of detergent will depend on the type
of fabric, load size, degree of soiling and hardness of the
water used.
Follow the product manufacturers’ instructions on quan-
tities to use.
Use less detergent if:
• you are washing a small load
Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Options
Compartment
COTTONS
NORMAL
90°-Cold
Main wash - Rinses
SPIN, RINSE HOLD,
EASY IRON , SUPER
QUICK, EXTRA RINSE
2)
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
1)
Max. load 6 kg - Reduced load 3 kg
White and coloured cotton (normally soiled items).
3)
COTTONS
NORMAL + PREWASH
90°-Cold
Prewash - Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
SPIN, RINSE HOLD,
EASY IRON , SUPER
QUICK, EXTRA RINSE
2)
1)
Max. load 6 kg - Reduced load 3 kg
White and coloured cotton (heavy soiled items).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
COTTONS
ECO
SPIN, RINSE HOLD,
EASY IRON , EXTRA
4)
2)
90°-40°
RINSE
Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 6 kg
White and coloured cotton. This programme can be selected
for slightly or normally soiled cotton items. The temperature
willdecreaseandthewashingtimewillbeextended. Thisallows
to obtain a good washing efficiency by saving energy.
3)
COTTONS
ECO + PREWASH
SPIN, RINSE HOLD,
EASY IRON , EXTRA
4)
2)
90°-40°
RINSE
Prewash - Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 6 kg
White and coloured cotton. This programme can be selected
for normally soiled cotton items. The temperature will decrease
and the washing time will be extended. This allows to obtain a
good washing efficiency by saving energy.
SYNTHETICS
NORMAL
60°-Cold
Main wash - Rinses
SPIN, RINSE HOLD,
EASY IRON , SUPER
QUICK, EXTRA RINSE
2)
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
1)
Max. load 3 kg - Reduced load 1.5 kg
Synthetic or mixed fabrics: underwear, coloured garments,
non-shrink shirts, blouses.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
SYNTHETICS
NORMAL + PREWASH
60°-Cold
Prewash - Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
SPIN, RINSE HOLD,
EASY IRON , SUPER
QUICK, EXTRA RINSE
2)
1)
Max. load 3 kg - Reduced load 1.5 kg
Synthetic or mixed fabrics: underwear, coloured garments,
non-shrink shirts, blouses.
DELICATES
40°-Cold
Main wash - Rinses
SPIN, RINSE HOLD, SU-
PER QUICK, EXTRA
RINSE
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 600 rpm for ZWS 588
1)
Max. load kg 3 - Reduced load 1.5 kg
Delicate fabrics: acrylics, viscose, polyester.
WOOL
SPIN, RINSE HOLD
40°-Cold
Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 2 kg
Washing programme for machine washable wool as well as for
hand washable woollens and delicate fabrics. Note : A single
or bulky item may cause imbalance. If the appliance doesn’t
perform the final spin phase, add more items, redistribute the
load manually and then select the spinning programme.
HANDWASH
SPIN, RINSE HOLD
30°-Cold
Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 2 kg
Special programme for delicate fabrics with «hand washing»
care symbol.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
JEANS
60°-Cold
Main wash - Rinses
SPIN, RINSE HOLD,
EASY IRON
2)
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 3 kg
With this programme it is possible to wash items like pants,
shirts or jackets in denim and also jersey realized with hi-tech
materials. (The Extra Rinse option will be activated automati-
cally).
SPORT INTENSIVE
40°-Cold
SPIN, RINSE HOLD, EX-
TRA RINSE
Prewash - Main wash - Rinses
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 3 kg
This programme is suitable for washing heavily soiled sport
items. The machine will add automatically a prewash phase
before the main wash to eliminate mud stains.
RINSES
Rinses
SPIN, RINSE HOLD,
EASY IRON , EXTRA
2)
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 6 kg
RINSE
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand. The machine per-
forms 3 rinses, followed by a final long spin. The spin speed
can be reduced.
DRAIN
Draining of water
Max. load 6 kg
For emptying out the water of the last rinse in programmes with
the Rinse Hold option selected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
SPIN
SPIN
Drain and long spin
Maximum spin speed 600 rpm for ZWS 568
Maximum spin speed 800 rpm for ZWS 588
Max. load 6 kg
Separate spin for hand washed garments and after programmes
with the Rinse Hold option selected. You can choose the spin
speed by pressing the relevant button to adapt it to the fabrics
to be spun.
O = OFF
For cancelling the programme which is running or to switch the machine off .
1) If you select the Super Quick option by pressing button 4 , we recommend that you reduce the maximum load as indicated. Full
loading is possible however with somewhat reduced cleaning results.
2) Max. load with Easy iron option 1 kg
3) If using liquid detergents, a programme without PREWASH must be selected.
4) This programme is not active at a temperature lower than 40°C.
What to do if…
Certain problems are due to lack of simple maintenance
Once the problem has been eliminated, press the button
or oversights, which can be solved easily without calling 6 to restart the programme. If after all checks, the problem
out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the red pilot
light of button 6 blinks to indicate that the machine is not
working.
persists, contact your local Service Centre.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
The door has not been closed (the button 6 red light blinks).
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The washingmachinedoesnotstart: The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and the button 6 has
not been pressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The water tap is closed (the button 6 red light blinks).
• Open the water tap.
The inlet hose is squashed or kinked (the button 6 red light blinks).
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 6 red
light blinks).
The machine does not fill:
• Clean the water inlet filters. (See "Cleaning the water inlet filters" for more
details).
The door is not properly closed (the button 6 red light blinks).
• Close the door firmly.
The drain hose is squashed or kinked (the button 6 red light blinks).
• Check the drain hose connection.
The drain filter is clogged (the button 6 red light blinks).
• Clean the drain filter.
An option or a programme that ends with the water still in the tub or a that
eliminates all the spinning phases has been selected.
The machine does not empty and/or
does not spin:
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
Too much detergent or unsuitable detergent (creates too much foam) has been
used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if it is
damp.
There is water on the floor:
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The emergency emptying cap has not been replaced into the filter cover or the
filter has not been properly screwed in after cleaning action.
• Refit the emergency emptying cap into the filter cover or screw the filter
fully in.
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
Unsatisfactory washing results:
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait a few minutes before opening the door.
There is water in the drum.
The door will not open:
• Select drain or spin programme to empty out the water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
The machine vibrates is noisy:
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times before the unbalance
disappears and normal spinning can resume. If, after 10 minutes, the laundry
is still not evenly distributed in the drum, the machine will not spin. In this
case, redistribute the load manually and select the spin programme.
Spinning starts late or the machine
does not spin:
• Redistribute the laundry.
The load is too small.
• Add moreitems, redistribute the load manually and then selectthe spinning
programme.
If you are unable to identify or solve the problem, contact
our service centre. Before telephoning, make a note of the
model, serial number and purchase date of your machine:
the Service Centre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Technical data
Dimensions
Width
Height
Depth
60 cm
85 cm
44 cm
Electrical connection
Water supply pressure
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Spin Speed
Cotton
6 kg
Maximum
600 rpm (ZWS 568)
800 rpm (ZWS 588)
Consumption values
Programme
Energy consumption
(KWh)
Water consumption (litres) Programme duration (Mi-
nutes)
White Cottons 90°
Cottons 60°
2.1
1.3
62
59
45
140
130
155
1)
1.02
Cotton ECO 60°
Cottons 40°
0.75
59
125
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Synthetics 40°
Energy consumption
(KWh)
Water consumption (litres) Programme duration (Mi-
nutes)
0.5
0.55
0.3
45
55
50
80
70
60
Delicates 40°
Wool/ Handwash 30°
1) «Cottons Eco» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy label, in compliance with
EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Care and cleaning
Cleaning the drawer recess
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry out
any cleaning or maintenance work.
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the ma-
chine. Do this separately from any laundry washing, and
according to the softening powder manufacturer's in-
structions. This will help to prevent the formation of lime
deposits.
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Drain pump
The pump should be inspected regularly and particularly
if:
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Proceed as follows:
• disconnect the appliance.
• if necessary wait until the water has cooled down.
Open the pump door lev-
ering on the groove with a
coin (or with the suitable
tool, that you can find in
the bag containing the in-
struction booklet, de-
pending on the model).
Remove the drawer by
pressing the catch down- part of the additive com-
wards and by pulling it partment should be re-
out. Flush it out under a moved.
tap, to remove any traces
To aid cleaning, the top
1
2
of accumulated powder.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Place a bowl with a small
edge close to the pump to
collect any spillage.
Replace the emergency
emptying cap into the filter
cover and fix it firmly.
Pull out the emergency
emptying cap from the fil-
ter cover, using a pliers.
Close the pump door.
When no more water
Warning! When the appliance is in use and
depending on the programme selected there can be
hot water in the pump. Never remove the pump cover
during a wash cycle, always wait until the appliance has
finished the cycle, and is empty. When replacing the
cover, ensureitissecurelyre-tightenedsoastostopleaks
and young children being able to remove it.
comes out, unscrew the
pump cover, using a pli-
ers, and remove the filter.
Always keep a rag nearby
to dry up spillage of water
when removing the cover.
2
1
Cleaning the water inlet filters
Remove any objects from
the pump impeller by ro-
tating it.
Important! If the appliance doesn't fill, takes long to fill
with water, the starting button blinks yellow or the display
(if available) shows the relevant alarm (see chapter "What
to do if..." for more details), check if the water inlet filters
are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from
the tap.
• Clean the filter in the
hose with a stiff brush.
Replace the filter into the pump paying attention to in-
sert it properly. When done, screw it firmly.
• Screw the hose back onto the tap. Make sure the
connection is tight.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
• Place the end of the inlet hose in a bowl placed on the
floor, open the emergency emptying cap of the filter
and let water drain out.
• Refit the emergency emptying cap into the filter and
screw the water inlet hose back.
• When you intend to start the machine up again, make
sure that the room temperature is above 0°C.
Emergency emptying out
If the water is not discharged, proceed as follows to empty
out the machine:
• Unscrew the hose from the machine. Keep a rag
nearby because some water may flow.
• Clean the filter in the valve with a stiff brush or with
the piece of cloth.
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor. Remove the emergency emp-
tying cap from the filter. The water should drain by
gravity into the bowl. When the bowl is full, refit the
emergencyemptyingcapintothefilter.Emptythebowl.
Repeat the procedure until water stops flowing out;
35°
45°
• clean the pump if necessary as previously described;
• screw the pump cover again and close the door.
• Screw the hose back to the machine and make sure
the connection is tight.
Important! Every time you drain the water through the
emergency emptying hose you must pour 2 litres of water
into the main wash compartment of the detergent drawer
and then run the drain programme. This will activate the
ECO Valve device avoiding that part of the detergent
remains unused at next washing.
• Turn on the water tap.
Frost precaution
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
Installation
Unpacking
All transit bolts and packing must be removed before us-
ing the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be transported
again.
After removing all the
packaging, carefully lay
Remove the power supply
cable and the hoses from
machine on it's back to re- the hose holders on the
movethepolystyrenebase rear of the appliance.
from the bottom.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Warning! This appliance must be connected to a
cold water supply
Caution! Before connecting up the appliance to new
pipework or to pipework that has not been used for
some time, run off a reasonable amount of water to flush
out any debris that may have collected
Unscrew the three bolts. Slideouttherelevantplas-
tic spacers.
Caution! Do not use the hose from your previous
appliance to connect to water supply.
Connect the hose to a tap
with a 3/4” thread. Always
use the hose supplied with
the appliance.
Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.
Positioning
35°
45°
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded bycarpets,
rugs etc. Check that the machine does not touch the wall
or other kitchen units. Level the washing machine by
raising or lowering the feet. The feet may be tight to adjust
as they incorporate a self locking nut, but the machine
MUST be level and stable.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and displace-
ment of the machine during operation. Never place card-
board, wood or similar materials under the machine to
compensate for any unevenness in the floor.
The other end of the inlet hose which connects to the
appliance can be turned as showed in the picture.
Do not place the inlet hose downwards. Angle the hose
to the left or right depending on the position of your
water tap. Set the hose correctly by loosening the ring
nut. After positioning the inlet hose, be sure to tighten
the ring nut again to prevent leaks.
Caution! The inlet hose must not be lengthened. If
it is too short and you do not wish to move the tap,
you will have to purchase a new, longer hose specially
designed for this type of use.
If necessary, check the
setting with a spirit level.
Water drainage
The end of the drain hose can be positioned in three ways:
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooked over the edge of a
sink using the plastic hose
guide supplied with the
machine.
In a sink drain pipe branch . This branch must be above
the trap so that the bend is at least 60 cm above the
ground.
Directly into a drain pipe at a height of not less than 60
cm and not more than 90 cm. The end of the drain hose
must always be ventilated , i.e. the inside diameter of
the drain pipe must be larger than the outside diameter
of the drain hose. The drain hose must not be kinked.
In this case, make sure the end cannot come unhooked
when the machine is emptying. This could be done by
tying it to the tap with a piece of string or attaching it
to the wall.
Electrical connection
Information on the electrical connection is given on the
rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take
the maximum load required, also taking into account any
other appliances in use.
Caution! The manufacturer does not accept any
responsibility for damage or injury through failure
to comply with the above safety precaution.
Caution! Should the appliance power supply cable
need to be replaced, this MUST be carried out by a
Service Centre.
Caution! Connect the machine to an earthed socket.
Warning! The appliance is supplied with a 13amp
plug fitted. In the event of having to change the fuse
in the plug supplied, a 13amp ASTA approved (BS1363/
A) fuse must be used.
The power supply cable must be easily accessible
after installing the machine.
Environment concerns
information about recycling of this product, please
contactyourlocalcouncil,yourhouseholdwastedisposal
service or the shop where you purchased the product.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
are recyclable.
>PS<=polystyrene
>PP<=polypropylene
21
Download from Www.Somanuals.com. All Manuals Search And Download.
This meansthatthey can be recycled by disposingofthem • The machine works more economically if it is fully
properly in appropriate collection containers.
loaded.
• Withadequatepre-treatment, stainsandlimitedsoiling
can be removed; the laundry can then be washed at a
lower temperature.
• Measure out detergent according to the water hard-
ness, the degree of soiling and the quantity of laundry
being washed.
Ecological hints
To save water, energyandto helpprotecttheenvironment,
we recommend that you follow these tips:
• Normally soiled laundry may be washed without pre-
washing in order to save detergent, water and time (the
environment is protected too!).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|