Zanussi Washer ZWQ 5100 User Manual

GB  
User manual  
2
Washing machine  
ZWQ 5100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Please read these points carefully before installing and  
using your appliance. Keep this user manual with your  
appliance.  
• The manufacturer cannot be held responsible for any  
damage resulting from incorrect installation.  
Precautions to be taken against frost  
If your appliance is exposed to temperatures below 0°C,  
General safety  
• Do not modify or attempt to modify this appliance. This the following precautions must be taken:  
would put yourself in danger.  
• Close the tap and disconnect the inlet hose.  
• Ensure that all coins, safety pins, brooches, screws etc  
have been removed before starting a washing pro-  
gramme. If left in washing, they can seriously damage  
the appliance.  
• Use the recommended quantity of detergent.  
• Put small items together (socks, belts etc.) in a small  
linen bag or pillow case.  
• Unplug and close inlet hose tap after using appliance.  
• Always disconnect the power supply from the appli-  
ance before cleaning or maintenance.  
• Place the end of this hose and the drain hose in a basin  
on the floor.  
• Select the Drain programme let it run until the end of  
the cycle.  
• Disconnect the appliance from the power supply by  
turning the programme selector to “Stop”  
.
• Unplug the appliance.  
• Replace the inlet hose and drain hose.  
This way, the water remaining in the hoses will be drained  
away, avoiding any ice formation which would damage  
• Do not machine wash clothes with ribbing, unfinished your appliance.  
or torn material.  
Before turning your appliance on again, ensure that it is  
installed in an area where the temperature will not fall  
below freezing.  
Installation  
• Unpack or ask for the appliance to be unpacked im-  
mediately upon delivery. Check the outside of the ap-  
pliance is not damaged in any way. Report all transit  
damage to your retailer.  
• Remove all transit bolts and packaging before instal-  
ling the appliance.  
• Connection to the water supply must be carried out by  
a qualified plumber.  
• If your domestic electrical circuit needs adapting to  
allow the appliance to be plugged in, use a qualified  
electrician.  
• Ensure that, after installation, the power cable is not  
trapped under the appliance.  
• If the appliance is installed on carpeted floor, ensure  
that the carpet does not obstruct any ventilation ducts  
located at the base of the appliance.  
• The appliance must be equipped with an earthed power  
plug which conforms to regulations.  
• Before connecting your appliance to the power supply,  
carefully read the instructions in the chapter entitled  
“Electrical connection”.  
Use  
• Your appliance is intended for normal domestic use.  
Do not use the appliance for commercial or industrial  
purposes or for any other purpose.  
• Refer to the instructions on the label of eachitem before  
washing.  
• Do not put items into the washing machine which have  
had stains removed with petrol, alcohol, trichlorethy-  
len etc. If such stain removers have been used, wait  
until the product has evaporated before putting these  
items into the drum.  
• This appliance is not intended for use by persons (in-  
cluding children) with reduced physical, sensory or  
mental capabilities, or lack of experience and knowl-  
edge, unless they have been given supervision or in-  
struction concerning use of the appliance by a person  
responsible for their safety.  
Children should be supervised to ensure that they do  
not play with the appliance.  
• Replacing the power cable should only be carried out  
by an authorised service engineer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to run a wash cycle?  
Using for the first time  
• Remove the polystyrene insert and all other items in-  
side the drum.  
• Run an initial wash cycle at 90°C, without any washing  
but with detergent to clean the water tank.  
• Ensuretheelectricalandwaterconnectionscom-  
ply with the installation instructions.  
Daily Use  
for Cotton Normal, Cotton Eco, Wool, Handwash, Jeans :  
1000 rpm, for Synthetics, Sport, Easy iron : 900 rpm, for  
Delicates, Curtains : 700 rpm.  
Loading washing  
• Open the lid of the ap-  
pliance.  
• Open the drum by de-  
pressing the locking  
button A: The two  
shutters unlock auto-  
matically.  
A
At the end of the programme, if you have selected “Rinse  
hold”  
or “Night cycle plus”, you then need to select  
a “Spin” or “Drain” programme to finish the cycle and  
empty the water.  
Selecting options  
• Load the washing,  
closethedrumandthe  
lid of your washing machine.  
You must select the different options after selecting the  
programme and before pressing the “Start/Pause” push-  
button (see “Programmes table”). Press the desired but-  
ton(s) : the corresponding lights come on. If pressed  
again, the lights go out. If one of the options is not com-  
patible with the selected programme, the “Start/Pause”  
pushbutton flashes red.  
Warning! Before closing the lid of your appliance,  
ensure that the drum is properly closed :  
• When the two shutters are closed,  
• locking button A released.  
“Prewash” option  
The appliance runs a prewash at 30°C max.  
Proportioning of detergents  
Pour the amount of washing powder into the washing  
“Super quick” option  
The washing time will be reduced depending on the pro-  
gramme selected.  
and prewash  
compartments if you have selected  
the “prewash” option. Pour fabric softener into the com-  
partment if necessary.  
“Rinse plus” option  
Selection of desired programme  
The washing machine will add one or more rinses during  
the cycle. This option is recommended for people with  
sensitive skin and in soft water areas.  
Turn the programme selector to the required programme.  
The “Start/Pause” pushbutton flashes green.  
If you turn the programme selector to another programme  
while a cycle is in progress, the appliance will ignore the  
new selected programme. The “Start/Pause” pushbutton  
flashes red for a few seconds.  
“Delay start”  
This option allows you to delay the start of a wash pro-  
gramme by 3, 6 or 9 hours by pressing the “Delay start”  
pushbutton.  
Selecting the temperature  
You can change or cancel the delayed start time at any  
time before you press the “Start/Pause” pushbutton by  
pressing the “Delay start” pushbutton again (when all in-  
dicators are off, the wash programme will start immedi-  
ately).  
If you have already pressed the “Start/Pause” pushbutton  
and you want to change or cancel the delayed start, pro-  
ceed as follows :  
Turn the temperature selector on the desired temperature  
(see “Programmes table”). The symbol means a cold  
wash.  
Selecting the spin speed  
Press the “Spin” pushbutton to change the spin speed.  
The maximum spin speeds are :  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
• To cancel the delay start and start the cycle immedi-  
Modifying the programme in progress  
ately, press “Start/Pause” and then “Delay start”. Press Before making any changes to the current programme,  
“Start/Pause” to start the cycle.  
you need to pause the washing machine by pressing the  
“Start/Pause” pushbutton. If the modification is not pos-  
sible, the “Start/Pause” pushbutton flashes red for a few  
seconds. If you still decide to change the programme, you  
must cancel the current programme (see below).  
Cancelling the programme  
• To change the timer delay period, you must go through  
the “Stop” position and reprogramme your cycle.  
The lid will be locked during the delayed start time. If you  
need to open it, you must first pause the appliance by  
pressing the “Start/Pause” pushbutton. After closing the  
lid again, press the “Start/Pause” pushbutton.  
If you want to cancel the programme, turn the programme  
selector to the “Stop” position  
.
Start of the programme  
End of the programme  
Press the “Start/Pause” pushbutton to start the cycle. The  
corresponding light will come on green. It is normal for  
the programme selector to remain stationary during the  
cycle. The light corresponding to the current cycle is il-  
luminated.  
The washing machine stops automatically, the “Start/  
Pause” pushbutton goes out and the light “End of cycle”  
comes on. The lid can only be opened around 2 mi-  
nutes after the washing machine has come to a stop. Turn  
the programme selector to the “Stop” position . Re-  
move washing. Unplug and close water inlet tap.  
+
+
: Prewash + Wash  
: Rinses + Spin  
: End of cycle  
Standby mode  
Interrupting a programme  
Adding washing during the first 10 minutes  
Press the “Start/Pause” pushbutton : the corresponding  
light will flash green while the appliance is paused. The  
lid can only be opened around 2 minutes after the washing  
machine has come to a stop. Press the “Start/Pause”  
pushbutton again to continue the programme.  
If the appliance is on but no commands are selected for  
10 min before or after a cycle, it goes into standby mode.  
All the lights go out and “Start/Pause” flashes slowly.  
To exit standby mode, simply press any pushbutton or  
turn the programme selector.  
Programmes table  
Programme / Type of washing  
Load/Time  
5,5 kg  
Possible options  
Cotton Normal (cold - 90°) : White or colour, e.g.  
Rinse hold, Prewash, Super quick, Rinse  
normally soiled work clothes, bed linen, table linen, 140-150 min plus, Delay start  
body linen, towels.  
1)  
5,5 kg  
145-155 min  
Rinse hold, Prewash, Rinse plus, Delay start  
Cotton Eco (40° - 90°) : White or colour, e.g.  
normally soiled work clothes, bed linen, table linen,  
body linen, towels.  
Synthetics (cold - 60°) : Synthetic fabrics, body lin- 2,5 kg  
Rinse hold, Prewash, Super quick, Rinse  
plus, Delay start  
en,fab, coloured farics, non-iron shirts, blouses.  
90-100 min  
Delicates (cold - 40°) : For all delicate materials, for 2,5 kg  
Rinse hold, Prewash, Super quick, Rinse  
plus, Delay start  
example curtains.  
60-70 min  
Wool (cold - 40°) : Machine washable wool carrying 1,0 kg  
the labels “pure new wool, machine washable, does 55-65 min  
not shrink”.  
Rinse hold, Delay start  
Handwash (cold - 40°) : Very delicate items carrying 1,0 kg  
Rinse hold, Delay start  
the “wash by hand” label.  
55-65 min  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme / Type of washing  
Load/Time  
Possible options  
Jeans (40°) : For washing denim clothes. The Rinse 3,0 kg  
Rinse hold, Prewash, Delay start  
plus option is activated.  
130-140 min  
Sport (40°) : For dirty outside sport clothes. The  
Prewash option is activated.  
2,5 kg  
95-105 min  
Rinse hold, Rinse plus, Delay start  
Rinse hold, Rinse plus, Delay start  
Rinse hold, Prewash, Rinse plus, Delay start  
Delay start  
Curtains (40°) : For washing curtains. The Prewash 2,5 kg  
option is activated.  
90-100 min  
Easy iron (40°) : For cottons and synthetics. Reduces 1,0 kg  
creasing and makes ironing easier.  
90-100 min  
Soak (30°) : Soaking for very dirty washing. The  
drum stops full of water.  
5,5 kg  
15-25 min  
Rinses : Hand washed items can be rinsed in this  
programme.  
5,5 kg  
50-60 min  
Rinse hold, Rinse plus, Delay start  
Drain : Runs an empty cycle after a Rinse hold (or 5,5 kg  
Night cycle plus).  
0-10 min  
Spin : A spin cycle from 500 to 1000 rpm after a  
Rinse hold (or Night cycle plus).  
5,5 kg  
10-20 min  
Delay start  
1) Reference programme for test conforming to CEI 456 standard (60° Eco programme) : 49 L / 1,04 kWh / 170 min  
Care and cleaning  
Unplug the appliance before cleaning.  
Descaling the appliance  
To descale the appliance, use an appropriate non-corro-  
sive product designed for washing machines. Read prod-  
uct label for recommended amounts and how often des-  
caling should be carried out.  
Object trap  
Regularly clean out the object trap which is located at the  
bottom of the drum :  
1
2
The exterior  
Use warm soapy water to clean the exterior of the appli-  
ance. Never use alcohol, solvents or similar products.  
Dispenser box  
To clean, proceed as follows :  
3
2
1
Check if the filter being coupled well be-  
fore closing the trap to pull up and down  
the central wall.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water inlet filters  
To clean, proceed as follows :  
1
Operating Problems  
Numerous checks were carried out on your appliance be- function, please refer to the sections below before con-  
fore it left the factory. However, should you notice a mal- tacting the after-sales service.  
Problems  
Causes  
The washing machine  
doesn’t start or doesn’t fill:  
• the appliance isn’t plugged in correctly, the electrical installation isn’t working,  
there is a power failure,  
• the lid of your appliance and the drum shutters aren’t closed firmly,  
• the programme start command hasn’t been properly selected,  
• the water supply has been cut off, the water inlet tap is closed,  
• the water inlet filters are dirty,  
• a red tab appears on the water inlet hose.  
The appliance fills but emp- • the drainage U-piece is fixed too low (see installation section).  
ties straight away:  
The washing machine  
doesn’t rinse or doesn’t emp-  
ty:  
• the drain hose is blocked or bent,  
• the object trap is obstructed,  
• the out of balance detector has been activated : washing is unevenly distributed  
in the drum,  
• the “Drain” programme or “Night Silence Plus” or “Rinse hold” option have been  
selected,  
• the height of the drainage U-piece is unsuitable.  
You have found water around • too much detergent has caused foam to overflow,  
the washing machine:  
• the detergent is unsuitable for machine washing,  
• the drainage U-piece isn’t attached correctly,  
• the water inlet hose is leaking.  
Wash is unsatisfactory:  
• the detergent is unsuitable for machine washing,  
• there is too much washing in the drum,  
• the wash cycle is unsuitable,  
• there isn’t enough detergent.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems  
Causes  
The appliance vibrates, is  
noisy:  
• all packaging have not been removed from the appliance (see installation section),  
• the appliance isn’t level and is unbalanced,  
• the appliance is too close to the wall or furniture,  
• washing is unevenly distributed in the drum, the load is too small,  
• the appliance is in running in period.  
The wash cycle is much too • the water inlet filters are dirty,  
long:  
• the power or water supply has been cut off,  
• the motor overheating detector has been activated,  
• the water inlet temperature is lower than usual,  
• the foam detection security system has been activated (too much detergent) and  
the washing machine has begun draining the foam,  
• the out of balance detector has been activated: an extra phase has been added to  
distribute washing more evenly in the drum.  
The washing machine stops • the water or electricity supply is defective,  
during a wash cycle:  
• a Rinse hold has been selected,  
• the drum shutters are open.  
The lid doesn’t open at the  
end of the cycle:  
• the temperature inside the drum is too high,  
• the lid unlocks 1 - 2 minutes after the end of the cycle.  
Softener runs directly into  
the drum when filling the dis-  
penser box:  
• you have gone past the MAX indicator.  
The “Start/Pause” pushbut- • the lid is not closed properly,  
1)  
2)  
ton flashes red  
:
• the object trap is obstructed,  
• the drain hose is blocked or bent,  
• the drain hose is fixed to high (see "Installation" section),  
• the drainage pump is blocked,  
• the standpipes blocked,  
• the water tap is closed, the water supply has been cut off.  
1) On some models, the auditable signals can sound  
2) After solving any problems, press "Start/Pause" pushbutton to restart the interrupted programme.  
Detergents and Additives  
Only use detergents and additives designed for use in a  
selected. For cycles without prewash, they must be added  
washing machine. We do not recommend mixing different via means of a dosing ball. Detergent tablets or doses  
types of detergents. This may spoil the washing. There  
must be placed in the detergent compartment of your ap-  
are no restrictions on the use of powder detergents. Liquid pliance's dispenser box.  
detergents must not be used when a prewash has been  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
850 mm  
400 mm  
600 mm  
LINE VOLTAGE /FREQUENCY  
POWER CONSUMPTION  
230 V / 50 Hz  
2300 W  
WATER PRESSURE  
Minimum  
Maximum  
0,05 MPa (0,5 bar)  
0,8 MPa (8 bar)  
Connection to water supply  
Type 20/27  
Installation  
Remove all protective packaging for transit before using  
for the first time. Keep in case needed for future transit:  
Transporting a non-secured appliance may damage in-  
ternal components and cause leakages and malfunctions.  
The appliance can also be damaged through physical  
contact.  
2a  
3
2b  
Unpacking  
1
2
4
3
4
To install your washing machine at the same level as sur-  
rounding furniture, proceed as shown on picture 4.  
Water supply  
Install the supplied water inlet hose at the rear of your  
washing machine by proceeding as follows. Do not reuse  
an old hose. The water inlet hose can not be extended. If  
it is too short, please contact the after-sales service.  
1
2
Untying  
1a  
1b  
3
2
a
1b  
Open the water inlet tap. Check there are no leaks.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
or multi-plug adaptor. Ensure that the plug is earthed and  
that it is in accordance with current regulations.  
Drainage  
Fit the U-piece on the drain-  
age hose. Place everything  
in a drainage point (or in a  
sink) at a height of between  
70 and 100 cm. Ensure it is  
positioned securely. Air  
must be able to enter the end  
of the hose, to avoid any risk  
of siphoning.  
Positioning  
Position the appliance on a flat and hard surface in a ven-  
tilated location. Ensure the appliance does not come into  
contact with the wall or other furniture. Accurate levelling  
avoids vibrations, noise and prevents the appliance from  
moving when running.  
The drain hose must never be stretched. If it is too short,  
contact an engineer.  
Electrical connection  
This washing machine must only be connected in single-  
phased 230 V. Check the fuse size: 13 A for 230 V. The  
appliance must not be connected with an extension lead  
Environment  
Disposing of the appliance  
dling of this product. For more detailed information about  
recycling of this product, please contact your local coun-  
cil, your household waste disposal service or the shop  
where you purchased the product.  
All materials carrying the symbol are recyclable.  
Dispose of them at a waste collection site (enquire  
at your local council) for collection and recycling. When  
disposing of your appliance, remove all parts which could  
be dangerous to others: cut off the power supply cable at  
the base of the appliance.  
Protecting the environment  
To save water and energy and therefore help protect  
the environment, we recommend the following:  
• Whenever possible, use the appliance at full capacity  
and avoid partial loads.  
• Onlyusetheprewashandsoakprogrammesforheavily  
soiled items.  
• Use an appropriate amount of detergent for the hard-  
ness of the water, the size of the load and how soiled  
the washing is.  
The symbol  
on the product or on its packaging indi-  
cates that this product may not be treated as household  
waste. Instead it should be taken to the appropriate col-  
lection point for the recycling of electrical and electronic  
equipment. By ensuring this product is disposed of cor-  
rectly, you will help prevent potential negative conse-  
quences for the environment and human health, which  
could otherwise be caused by inappropriate waste han-  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Projection Television LD 2240 User Manual
Whirlpool Refrigerator 2183013 User Manual
Whirlpool Ventilation Hood LI3Z4C User Manual
White Rodgers TV VCR Combo 36C94 303 User Manual
Woods Equipment Compact Loader LU126 User Manual
Yamaha Motorcycle FJR1300ATC User Manual
Yamaha Musical Instrument CVP 59S User Manual
Zanussi Dishwasher ZDT 6252 User Manual
Zanussi Oven FB 515 User Manual
Zenoah Brush Cutter BCZ2602DL User Manual