Zanussi Washer ZWP 581 User Manual

EN  
User manual  
Washing Machine  
ZWP 581  
ZWQ 5102  
ZWQ 5103  
ZWQ 5122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Refer to the instructions on the label of each item be-  
fore washing.  
• Do not put items into the washing machine which have  
had stains removed with petrol, alcohol, trichlorethylen  
etc. If such stain removers have been used, wait until  
the product has evaporated before putting these items  
into the drum.  
• This appliance is not intended for use by persons (in-  
cluding children) with reduced physical, sensory or  
mental capabilities, or lack of experience and knowl-  
edge, unless they have been given supervision or in-  
struction concerning use of the appliance by a person  
responsible for their safety.  
Children should be supervised to ensure that they do  
not play with the appliance.  
• Empty pockets and unfold items.  
Product description  
1
2
3
The control panel  
Lid handle  
Adjustable levelling feet  
1
2
3
Control panel  
1
2
3
7
6
5
4
1
2
3
4
Programme selector  
DELAY START button  
Lights of cycle progress  
START/PAUSE button  
5
6
7
EXTRA RINSE button  
OPTIONS button  
SPIN button  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dispenser box  
Prewash  
Wash  
M
Softener (do not fill above the MAX symbol  
)
How to run a wash cycle?  
Using for the first time  
• Run an initial wash cycle at 90°C, without any  
washing but with detergent to clean the water  
tank.  
• Ensure the electrical and water connections com-  
ply with the installation instructions.  
• Remove the polystyrene insert and all other items  
inside the drum.  
Daily use  
If you turn the programme selector to another programme  
while a cycle is in progress, the appliance will ignore the  
Loading washing  
• Open the lid of the ap-  
pliance.  
• Open the drum by de-  
pressing the locking  
button A: The two  
shutters unlock auto-  
matically.  
new selected programme. The “Start/Pause”  
ton flashes red for a few seconds.  
pushbut-  
Selecting the spin speed  
A
Press the “Spin”  
button to change the spin speed, if  
you want your washing to be spun at a different speed to  
the one selected by the appliance. You can also select the  
• Load the washing,  
close the drum and the  
lid of your washing machine.  
“Rinse hold”  
option.  
For the maximum spin speeds see "Washing pro-  
grammes".  
Rinse hold  
Warning! Before closing the lid of your appliance,  
ensure that the drum is properly closed :  
• When the two shutters are closed,  
• locking button A released.  
By selecting this function the water of the last rinse is not  
emptied out to prevent the fabrics from creasing.  
At the end of the programme, if you have selected the  
“Rinse hold”  
, you then need to select a “Spin”  
or  
“Drain”  
water.  
programme to finish the cycle and empty the  
Proportioning of detergents  
Pour the amount of washing into the washing  
and pre-  
wash compartments if you have selected the “pre-  
wash” option. Pour fabric softener into the compartment  
if necessary.  
Selecting options  
You must select the different options after selecting the  
programme and before pressing the “Start/Pause”  
pushbutton (see “Programmes table”). Press the desired  
button(s) : the corresponding lights come on. If pressed  
again, the lights go out. If one of the options is not com-  
Selection of desired programme  
Turn the programme selector to the required programme.  
The “Start/Pause”  
pushbutton flashes green.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
patible with the selected programme, the “Start/Pause”  
pushbutton flashes red.  
Press the “Start/Pause”  
pushbutton : the correspond-  
ing light will flash green while the appliance is paused.  
The lid can only be opened around 2 minutes after the  
washing machine has come to a stop. Press the “Start/  
“Prewash” option  
The appliance runs a prewash at 30°C max.  
Pause”  
pushbutton again to continue the programme.  
Modifying the programme in progress  
Before making any changes to the current programme,  
you need to pause the washing machine by pressing the  
“Quick” option  
The washing time will be reduced depending on the pro-  
gramme selected.  
“Start/Pause”  
possible, the “Start/Pause”  
pushbutton. If the modification is not  
pushbutton flashes red for  
“Extra Rinse” option  
The washing machine will add one or more rinses during  
the cycle. This option is recommended for people with  
sensitive skin and in soft water areas.  
a few seconds. If you still decide to change the pro-  
gramme, you must cancel the current programme (see be-  
low).  
Cancelling the programme  
If you want to cancel the programme, turn the programme  
selector to the “Stop” position.  
Start of the programme  
Press the “Start/Pause”  
The corresponding light will come on green. It is normal  
for the programme selector to remain stationary during the  
cycle. The light corresponding to the current cycle is illu-  
minated.  
pushbutton to start the cycle.  
End of the programme  
The washing machine stops automatically, the “Start/  
Pause”  
cle”  
pushbutton goes out and the light “End of cy-  
comes on. The lid can only be opened around 2  
+
+
: Prewash + Wash  
: Rinses + Spin  
minutes after the washing machine has come to a stop.  
Turn the programme selector to the “Stop” position  
Remove washing. Unplug and close water inlet tap.  
: End of cycle  
.
Interrupting a programme  
Adding washing during the first 10 minutes  
Stand by: once the programme has finished after a  
few minutes the energy saving system is enabled  
with the pilot lights switched on. By pressing any button  
the appliance will come out of the energy saving status.  
Washing programmes  
Programme / Type of washing  
Load  
5,5 kg  
Available options  
Rinse hold, Quick, Prewash, Extra rinse, De-  
lay start  
Cottons (30° - 90°) : White or colour, e.g. nor-  
mally soiled work clothes, bed linen, table linen, body  
linen, towels.  
Max. spin speed: 850 rpm for model ZWP581/ 1000  
rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for  
model ZWQ5122  
5,5 kg  
Rinse hold, Prewash, Extra rinse, Delay start  
Cotton Eco (40°and 60°) : White or colour,  
e.g. normally soiled work clothes, bed linen, table lin-  
en, body linen, towels.  
Max. spin speed: 850 rpm for model ZWP581/ 1000  
rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for  
model ZWQ5122  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme / Type of washing  
Load  
2,5 kg  
Available options  
Rinse hold, Quick, Prewash, Extra rinse, De-  
lay start  
Synthetics (30° - 60°) : Synthetic fabrics, body  
linen, coloured fabrics, non-iron shirts, blouses.  
Max. spin speed: 900 rpm (850 rpm for model  
ZWP581)  
1,0 kg  
Rinse hold, Prewash, Extra rinse, Delay start  
Easy iron (40°) : For cottons and synthetics. Re-  
duces creasing and makes ironing easier.  
Max. spin speed: 900 rpm (850 rpm for model  
ZWP581)  
Special programmes  
2,5 kg  
1,0 kg  
Rinse hold, Super quick, Prewash, Extra  
rinse, Delay start  
Delicates (30° - 40°) : For all delicate materials,  
for example curtains.  
Max. spin speed: 700 rpm  
Rinse hold, Delay start  
Handwash (30°- 40°) : Very delicate items carry-  
ing the “wash by hand” label.  
Max. spin speed: 850 rpm for model ZWP581/ 1000  
rpm for model ZWQ5102,ZWQ5103/ 900 rpm for  
model 1200  
1,0 kg  
2,5 kg  
Rinse hold, Delay start  
Wool (40°) : Machine washable wool carrying the  
labels “pure new wool, machine washable, does not  
shrink”.  
Max. spin speed: 850 rpm for model ZWP581/ 1000  
rpm for model ZWQ5102,ZWQ5103/ 900 rpm for  
model ZWQ5122  
Rinse hold, Extra rinse, Delay start  
Sport intensive (40°) : For normally and heavily  
soiled outdoor sport clothes. machine will add auto-  
matically a prewash phase before the main wash to  
eliminate mud stains.1)  
Max. spin speed: 900 rpm (850 rpm for model  
ZWP581)  
2,5 kg  
5,5 kg  
Rinse hold, Extra rinse, Delay start  
Rinse hold, Extra rinse, Delay start  
Curtains (40°) : For washing curtains. The Pre-  
wash option is activated.  
Max. spin speed: 700 rpm  
Rinses : Hand washed items can be rinsed in this  
programme.  
Max. spin speed: 850 rpm for model ZWP581/ 1000  
rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for  
model ZWQ5122  
5,5 kg  
Drain : Runs an empty cycle after a Rinse hold  
option.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme / Type of washing  
Load  
5,5 kg  
Available options  
Delay start  
Spin : A spin cycle from 500 to 850 rpm for mod-  
el ZWP581/ 1000 rpm for model  
ZWQ5102,ZWQ5103/ 1200 rpm for model ZWQ5122  
after a Rinse hold option.  
1) We recommend not to add any detergent for prewash phase.  
Care and cleaning  
Unplug the appliance before cleaning.  
Descaling the appliance  
To descale the appliance, use an appropriate non-corro-  
sive product designed for washing machines. Read prod-  
7
CLACK  
uct label for recommended amounts and how often desca-  
ling should be carried out.  
5
8
6
CLACK  
The exterior  
Use warm soapy water to clean the exterior of the appli-  
ance. Never use alcohol, solvents or similar products.  
Check if the filter being  
coupled well before clos-  
ing the trap to pull up and  
down the central wall.  
Dispenser box  
To clean, proceed as follows :  
3
1
2
4
Water inlet filters  
To clean, proceed as follows :  
Object trap  
Regularly clean out the object trap which is located at the  
bottom of the drum :  
3
1
2
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Problems  
Numerous checks were carried out on your appliance be-  
fore it left the factory. However, should you notice a mal-  
function, please refer to the sections below before contact-  
ing the after-sales service.  
Problems  
Causes  
The appliance doesn’t start or • the appliance isn’t plugged in correctly, the electrical installation isn’t working,  
doesn’t fill:  
there is a power failure,  
• the lid of your appliance and the drum shutters aren’t closed firmly,  
• the programme start command hasn’t been properly selected,  
• the water supply has been cut off, the water inlet tap is closed,  
• the water inlet filters are dirty (see “Care and cleaning ”).  
The appliance fills but emp- • the drainage U-piece is fixed too low (see “Installation”).  
ties straight away:  
The appliance doesn’t rinse  
or doesn’t empty:  
• the drain hose is blocked or bent,  
• the drainage filter is obstructed (see “Care and cleaning ”),  
• the out of balance detector has been activated: washing is unevenly distributed in  
the drum,  
• the “Drain” programme or “Night Cycle” or “Rinse hold” option have been selec-  
ted,  
• the height of the drainage U-piece is unsuitable.  
The appliance doesn’t spin:  
• balance problem with the laundry load: add more laundry or manually adjust the  
items in the drum.  
You have found water around • too much detergent has caused foam to overflow,  
the appliance:  
• the detergent is unsuitable for machine washing,  
• the drainage U-piece isn’t attached correctly,  
• the water inlet hose is leaking.  
The washing results are not  
satisfactory :  
• the detergent is unsuitable for machine washing,  
• there is too much washing in the drum,  
• the wash cycle is unsuitable,  
• there isn’t enough detergent.  
The appliance vibrates, is  
noisy:  
• all packaging have not been removed from the appliance (see “Installation”),  
• the appliance isn’t level and is unbalanced (see “Installation”),  
• the appliance is too close to the wall or furniture,  
• washing is unevenly distributed in the drum, the load is too small,  
• the appliance is in running in period, noise will disappear with time.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems  
Causes  
The wash cycle is much too  
long:  
• the water inlet filters are dirty (see “Care and cleaning ”),  
• the power or water supply has been cut off,  
• the motor overheating detector has been activated,  
• the water inlet temperature is lower than usual,  
• the foam detection security system has been activated (too much detergent) and the  
washing machine has begun draining the foam,  
• the out of balance detector has been activated: an extra phase has been added to  
distribute washing more evenly in the drum.  
The appliance stops during a • the water or electricity supply is defective,  
wash cycle:  
• a “Rinse hold” has been selected,  
• the drum shutters are open.  
The lid doesn’t open at the  
end of the cycle:  
• the temperature inside the drum is too high,  
• the lid unlocks 1 - 2 minutes after the end of the cycle.  
Softener runs directly into  
the drum when filling the  
dispenser box:  
• you have gone past the MAX indicator.  
The drainage pump runs  
constantly, even when the  
appliance is inactive:  
• the anti-flooding security system has been activated, please proceed as follows :  
- close the water inlet tap,  
- empty the appliance for 2 minutes before unplugging,  
- call the after-sales service.  
The “Start/Pause” pushbut-  
• the lid is not closed properly,  
• the drainage filter is obstructed,  
ton 1) flashes red 2)  
:
• the drain hose is blocked or bent,  
• the drain hose is fixed to high (see "Installation"),  
• the drainage pump is blocked,  
• the standpipes blocked,  
• the water tap is closed, the water supply has been cut off.  
1) On some models, the audible signals can sound  
2) After solving any problems, press "Start/Pause" pushbutton to restart the interrupted programme.  
Detergents and Additives  
Only use detergents and additives designed for use in a  
washing machine. We do not recommend mixing different  
types of detergents. This may spoil the washing. There are  
no restrictions on the use of powder detergents. Liquid  
lected. For cycles without prewash, pour the liquid deter-  
gent directly into the drum or use a special dosing device  
(supplied by the detergent's manufacturer). Detergent tab-  
lets or doses must be placed in the detergent compart-  
detergents must not be used when a prewash has been se- ment of your appliance's dispenser box.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
850 mm  
400 mm  
600 mm  
LINE VOLTAGE /FREQUENCY  
POWER CONSUMPTION  
FUSE  
230 V / 50 Hz  
2300 W  
10 A  
Level of protection against ingress of solid particles and moisture  
Water supply  
IPX4  
Cold water  
WATER PRESSURE  
Minimum  
Maximum  
0,05 MPa (0,5 bar)  
0,8 MPa (8 bar)  
Connection to water supply  
Type 20/27  
Consumption values  
Programme  
Energy consumption  
(kWh)1)  
Water consumption  
Programme duration  
(Minutes)1)  
(litre)1)  
White Cottons 90 °C  
Cottons 60 °C  
2.2  
1.3  
67  
160  
145  
140  
80  
62  
Cottons 40 °C  
0.75  
0.65  
0.3  
62  
Synthetics 40 °C  
Delicates 30 °C  
Wool 30 °C  
48  
53  
60  
0.4  
48  
71  
Handwash 30 °C  
0.4  
48  
61  
1) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type of laundry, on the  
temperature of the water supply and on the ambient temperature.  
Standard programmes for the Energy Label consumption  
values  
The cotton 60 °C economy and cotton 40 °C economy are  
the standard cotton programmes for normally soiled cot-  
ton laundry. They are suitable to clean normally soiled  
cotton laundry and they are the most efficient programmes  
in terms of combined energy and water consumption for  
washing that type of cotton laundry.  
They agree with EN60456.  
Installation  
Remove all protective packaging for transit before using  
for the first time. Keep in case needed for future transit:  
Transporting a non-secured appliance may damage inter-  
nal components and cause leakages and malfunctions.  
The appliance can also be damaged through physical con-  
tact.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
Water supply  
1
1
2
2
90O  
In case of necessity move Open the water inlet tap.  
the inlet hose in the direc- Check there are no leaks.  
tion shown on picture. To The water inlet hose can  
1
make this loose the inlet  
not be extended. If it is too  
2
hose ring nut and position short, please contact the  
the inlet hose downwards after-sales service.  
as drawn on picture.  
Tighten the ring nut back  
and make sure there are  
Untying  
no leaks.  
A
B
A
Drainage  
C
D
Fit the U-piece on the drain-  
age hose. Place everything  
in a drainage point (or in a  
sink) at a height of between  
min  
max  
70 cm  
70 and 100 cm. Ensure it is  
positioned securely. Air  
must be able to enter the end  
of the hose, to avoid any risk  
of siphoning.  
100 cm  
B
B
D
1
2
The drain hose must never be stretched. If it is too short,  
contact an engineer.  
2
1
Electrical connection  
This washing machine must only be connected in single-  
phased 230 V. Check the fuse size: 13 A for 230 V. The  
appliance must not be connected with an extension lead  
or multi-plug adaptor. Ensure that the plug is earthed and  
that it is in accordance with current regulations.  
Positioning  
Position the appliance on a flat and hard surface in a ven-  
tilated location. Ensure the appliance does not come into  
contact with the wall or other furniture. Accurate levelling  
avoids vibrations, noise and prevents the appliance from  
moving when running.  
Keep the transit bolts for  
when you move the appli- the same level as neigh-  
ance.  
To install the appliance at  
boring furniture, cut these  
plastic pieces.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environment concerns  
at your local council) for collection and recycling. When  
disposing of your appliance, remove all parts which could  
be dangerous to others: cut off the power supply cable at  
the base of the appliance.  
The symbol  
on the product or on its packaging  
indicates that this product may not be treated as  
household waste. Instead it should be taken to the  
appropriate collection point for the recycling of electrical  
and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential  
negative consequences for the environment and human  
health, which could otherwise be caused by inappropriate  
waste handling of this product. For more detailed  
information about recycling of this product, please contact  
your local council, your household waste disposal service  
or the shop where you purchased the product.  
Protecting the environment  
To save water and energy and therefore help protect  
the environment, we recommend the following:  
• Whenever possible, use the appliance at full capacity  
and avoid partial loads.  
• Only use the prewash and soak programmes for heavily  
soiled items.  
• Use an appropriate amount of detergent for the hard-  
ness of the water, the size of the load and how soiled  
the washing is.  
Disposing of the appliance  
All materials carrying the  
Dispose of them at a waste collection site (enquire  
symbol are recyclable.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weed Eater Trimmer 530163408 User Manual
West Bend Bread Maker 5225 User Manual
Whirlpool Microwave Oven GT4175 User Manual
White Rodgers Thermostat 1TKF9 User Manual
White Rodgers Thermostat 179 User Manual
Woodstock TV Antenna d4327 d4328 User Manual
Yamaha CD Player 506 User Manual
Yamaha DVD Player DVD S557 User Manual
Yamaha Stereo Amplifier AX 596 User Manual
Zanussi Range 200154 User Manual