WASHING MACHINE
FLS 579 C
F
L
S
-
5
7
9
C
1
2
2
3
4
5
6
7
8
9
10 11 12 13
9 0
°
°
3 0
°
4 0
INSTRUCTION BOOKLET
35.292.487/0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Fo r t he User
Fo r t he Inst aller
Im portant Safety Inform ation
Description of the Appliance
The Control Panel
2
Installation Instructions
15
4
Technical Specifications
Unpacking
Positioning
Water inlet
Water drainage
15
16
17
5
Operating sequence
Before the first use
Load the laundry
Measure out the detergent
Measure out the additive
Select the temperature
Select the required programme
Start the machine
6-7
17
17-18
18
6
6
6
6
6
7
7
7
Levelling
Special conditions
Electrical connections
Permanent connection
18
19
19
At the end of the programme
Washing Program m es
Washing Hints
8-9
10
11
Wash Care Sym bols
Maintenance and Cleaning
Descaling
After each wash
12-13
12
12
External cleaning
12
12
12
13
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
The dangers of freezing
13
Som ething Not Working
Service and Spare Parts
14
14
Gu id e t o u se t he Inst r u ct io n Bo o k
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
i
Hints and tips
How do we help to protect the environm ent?
We use recycled paper!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
1 Detergent dispenser drawer
4
1 2
5 6
2 Programme guide
3
3 “Mains-on” light
4 “Options” buttons
F
L
S
-
5
7
9
C
1
2
2
3
4
5
6
7
8
9
10 11 12 13
°
3 0
°
4 0
5 Temperature selector dial
6 Program selector dial & ON/OFF switch
7 Door opening handle
8 Filter
7
8
9 Adjustable feet
9
Det ergent d isp enser d rawer
Prewash
Wash
Fabric softener
AL035
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
F
L
S
-
5
7
9
C
1
2
2
3
4
5
6
7
8
9
10 11 12 13
°
3 0
7
1
2
3
4
5
6
1 Program m e Gu id e
2 ON /OFF LAMP
5. TEMPERATURE SELECTOR
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to
be washed.
To select the required temperature turn the control until
the marker on the top coincides with the required
temperature (reference mark on the control panel)
It lights when the appliance is operating.
3 Half lo ad b u t t o n
Available only for programmes 1 to 4
On the program chart you will find the most appropriate
temperature for each kind of washing.
Pressing this button before starting the intense program
there will be one rinse less which leads to energy and
water saving
6. PROGRAM SELECTOR
To select the required program turn the control
clockwise until the marker on the top coincides with the
number of the required program (reference mark on the
control panel).If at any chance you pass by the required
number NEVER TURN THE CONTROL
ANTICLOCKWISE just continue clockwise until the
required number is reached again.
4 Rinse ho ld b u t t o n
Available only for programmes 7 to 12
Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
i
Before your first wash, we recom m end that
you run a cotton cycle at 60°C, without any
la u n d r y in t h e m a c h in e , t o r e m o ve a n y
m anufacturing residue from the drum and tub.
Pou r 1 / 2 a m easu re of det ergen t in t o t h e
dispenser drawer and start the m achine.
1. Lo ad t he lau nd r y
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
Do not overload the washing machine, but always try
to use it utmost capacity in accordance with the type of
fabric. Reduce the quantity when washing very dirty or
fluffy laundry.
P0004
2. Measu re o u t t he d et ergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out a prewash(*), pour detergent
into the appropriate compartment marked
(*) Prewash is available in programme “1”.
AL025
3. Measu re o u t t he add it ive
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
«MAX» mark in the drawer).
Close the drawer gently.
AL023
4. Select t he t em perat ure
Turn the dial to the desired temperature.
9 0
P0345
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select t he required program m e
Turn the programme selector dial CLOCKWISE to the
2
required programme.
P0215
6. St ar t t he m achine
Before starting up the machine check that:
2
■
the appliance is plugged in
■
the water supply tap is turned on
■
the door and the detergent dispenser drawer are
closed.
Pull the programme selector selector dial outwards, the
operating pilot light will illuminate and the machine will
start operating.
P0216
7. At t he end o f t he p rogram m e
The machine stops automatically and the operating pilot
light goes out.
The door is controlled by a safety device which releases
3 minutes after the end of the programme.
Before opening the door ensure there is no water in
the drum.
Switch the machine off by depressing the programme
selector dial.
When the programme has finished, you are advised to
unplug the appliance and turn off the water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Program m es
Program m es fo r co t t o n and linen
Maximum load 5 kg
Program.
dial
position
Compartments
to use
Possible
options
Program Temperature ˚C Degree of soil
Whites with
Description
Prewash at 40 ˚C
Wash at 60˚- 90˚C
4 rinses
Heavy soiled
1
2 (•)
2
60°- 90°
prewash
Spin at 500 rpm
Whites
without
prewash
Wash at 60˚- 90˚C
4 rinses
Spin at 500 rpm
Normal soiled
Normal soiled
Normal soiled
60°- 90°
40°- 60°
30°- 40°
Wash at 40˚- 60˚C
4 rinses
Spin at 500 rpm
Fast
Coloureds
Wash at 30˚- 40˚C
4 rinses
Spin at 500 rpm
Non Fast
Coloureds
3
4 rinses
Spin at 500 rpm
Rinses
4
Load additive
1 rinses
Spin at 500 rpm
Additives
softener
5
Draining of water
Spin at 500 rpm
Spin
6
(•)This 60˚C program m e is the reference program m e for the Energy label
according to the article 2, paragraph 1 of the EEC Directive 92/75
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Program m es
Program m es fo r synt het ics, d elicat es and wo o l
Maximum load 2 kg (wool m aximum load 1 kg)
Program.
dial
position
Compartments
Possible
options
Program Temperature ˚C Degree of soil
Description
to use
Prewash at 40 ˚C
Wash at 40˚- 60˚C
3 rinses
Mixed
Fabrics
Heavy soiled
7
8
40°- 60°
Draining of water
Wash at 40˚- 60˚C
3 rinses
Draining of water
Non Fast
Coloureds
Normal soiled
40°- 60°
Wash at 30˚- 40˚C
3 rinses
Draining of water
Synthetics
Delicates
Normal soiled
9
30°- 40°
Wash at 30˚- 40˚C
3 rinses
Draining of water
Wool Silk
Normal soiled
10
11
12
13
30°- 40°
3 rinses
Draining of water
Rinses
Delicates
Load additive
1 rinses
Draining of water
Additives
Softener
Drain
Draining of water
If you select the Rinse Hold button
the machine will stop after the last rinse with water in the drum. To prevent
water spillage you must select either Drain (13) or Spin (6) before attempting to open the door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Hints
i
■
Do NOT overload the machine. Weigh the laundry the
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
first few times you use the appliance.
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
■
■
Only wool marked «Pure New Wool - washable,
preshrunk» can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Serviette
Tea towel
70-120 g
Linen hand towel
Toweling hand towel
Toweling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
■
■
Once you have finished using the machine, you are
advised to unplug it and turn off the water tap.
To avoid an excessive and damaging amount of
lather when washing net curtains, it is advisable to
wash large curtains singularly and take extra care
when measuring the detergent.
Man’s shirt
Apron
Should an excess of lather accidentally occur, switch
off the machine, select the spin programme which is
preceded by a drain cycle, to remove the lather and
then start the wash again.
■
■
Load the laundry loosely alternating large items with
small ones.
■
■
■
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
■
■
■
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
■
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
■
■
■
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
■
■
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
■
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Sym bols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
95
Cotton, Linen or Viscose
without Special Finishes
Colour fast at 60°C.
Normal (Maximum)
60
50
Nylon, Polyester/Cotton, Viscose
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
with
Special
Finishes,
Cotton/Acrylic Mix.
Cotton, Linen or Viscose
Colour fast at 40°C but not 60°C.
40
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Much Reduced (Minimum)
Hand wash only
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
P
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
May be tumble dried
with high heat setting
with low heat setting
A cross through any symbol means «DO NOT»
X
Im p o r t ant N o t es
For best results, always use the dispenser drawer for dispensing detergents and liquid additives.Once the dispenser has
been filled, close it by pushing it in gently. This is particularly important if you are using fabric conditioner to avoid
the conditioner entering the machine prematurely.
When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried
out you must DISCONNECT tha appliance
from the electricity supply
Descaling
The water we normally use contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
Aft er each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Ex t er nal cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning t he d isp enser d rawer
From time to time the washing powder and additive
dispenser drawer should be cleaned.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
AL033
AL021
Keep clean the control panel to avoid liquids to
spread in the inside part of the panel
Cleaning t he d rawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme for a
P0185
few minutes without any clothes in the drum.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning t he filt er
The water drain filter
A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after every
washing programme.
Open the filter door and place a container underneath to
catch any spillage. If the filter is blocked and the
machine is unable to drain you will need to drain the
water manually from the machine at this stage. To do
this, unhook the drain hose from the standpipe or sink
and hold the end of the hose over a bowl on the floor.
The water should drain by gravity into the bowl. When
the bowl is full, hook the hose back up and empty the
bowl. Repeat the procedure until water stops flowing
out.
Unscrew and remove the filter.
Clean carefully under a fast running tap.
Replace the filter turning now clockwise and tighten it.
P0040
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children being
able to remove it.
The water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Remove and clean the filter using a hard bristle brush.
Replace the filter and tighten up the inlet hose.
P0090
P0021
The d anger s o f freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
■
Turn off the water tap.
■
Unscrew the inlet hose.
■
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hose in a bowl. Run the draining programme.
■
Disconnect the appliance.
■
Screw the inlet hose and reposition the drain hose.
■
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Som ething Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting your Local service Force Centre, please carry out the checks listed below.
Sym ptom
Possible causes
■
The machine does not start
The door has not been closed.
The plug is not properly inserted in the power socket.
There is no current at the socket
The main fuse has blown.
The selector dial is not correctly positioned and pulled out
No water is entering the machine (see: the machine does not fill)
■
■
■
■
■
■
The machine does not fill
Ensure the water tap is open and the water supply has not been disconnected
The filter in the inlet hose is blocked.
The inlet hose may be squashed or kinked.
The water pressure is too low
■
■
■
■
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
■
■
■
The machine does not empty and/or
does not spin
The drain hose may be squashed or kinked
The RINSE HOLD option has been selected.
The drain filter may be blocked
The drain hose extension is not correct. Follow the instructions for
■
■
■
connecting to the waste.
The drainage system pipes are blocked.
■
■
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
■
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
■
■
■
■
The machine vibrates or is noisy
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level.
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
The machine is overloaded
■
■
■
■
■
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model and
serial number. This information can be found on the
rating plate (see picture).
Mod.
..........
Ser.
Please note that it will be necessary to provide proof of
purchase for any in-guarantee service calls. In-guarantee
customers should ensure that the above checks have
been made as the engineer will make a charge if the
fault is not a mechanical or electrical breakdown.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
55 cm
POWER SUPPLY VOLTAGE
MAX. POWER ABSORBED
220-230 V/50 Hz
2200 W (10A)
WATER PRESSURE
Minimum
Maximum
5 N/cm2
80 N/cm2
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool
5 kg
2 kg
2 kg
1 kg
SPIN SPEED
Maximum
500 rpm
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Unp ack ing
Before starting the machine up, the transport security
bolts must be removed as follows:
You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.
■
Unscrew and remove the three rear transit bolts
(using a spanner).
P0287
■
Lay the machine gently on its back, making sure
that the hoses are not squashed.
We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back
to avoid the hoses being squashed.
P0018
■
Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.
1
2
AL009
■
Place the machine in an upright position and
remove the three plastic bolts.
P0001
■
Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction
booklet.
P0002
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Po sit io ning
Your new Zanussi washing machine has been designed
to be permanently plumbed in to you home’s water
supply and drainage system. However, if this is not
possible, it may be connected to suitable existing taps,
with the drain hose discharging into the sink.
Wat er inlet
There should be a COLD WATER tap near the washing
machine with a screwing on connection pipe of 3/4 gas
for the water supply, a sink, a wash basin or a drainage
system in the wall.
Previously check if:
■
it is not a hot water tap.
■
the running water is clean. If not, run off a
reasonable amount of water to flush out any debris
that may have collected in the pipes.
Have the permanent drainage system in the wall
checked by a plumber.
Place the enclosed rubber joint, delivered in a plastic
bag together with the appliance (A), at the very end of
the inlet hose and carefully screw the pipe to the tap
taking care not to damage the screwdrive and fix the nut
well on to the end in order to avoid leaking.
A
AL013
If necessary turn the hose adequately by unscrewing the
nut at the rear of the appliance.
Now tighten the nut anew to avoid leaks. (Open the tap
and assure that it does not leak and close it again.)
P0021
Wat er d rainage
If you intend the drain hose from the machine to empty
into a sink, make sure that the sink is empty and that the
plug hole is not blocked.
Place the drain hose in the sink with the aid of the bent
piece delivered separately.
The bent piece has to be entered into the tube´s mouth
in order to assure the support.. Aforesaid piece allows
the hose to be fixed to the wall by means of an opening
on the upper part and that way the hose does not move
and its falling is avoided
P0022
17
Download from Www.Somanuals.com. All Manuals Search And Download.
If the machine is permanently plumbed in, hook the end
of the hose into a standpipe installed for the purpose.
The standpipe must have an internal diameter of at least
40mm in order that there is an air gap between the drain
hose and the standpipe. Make sure, that it is designed in
such a way, that the end of the drain hose cannot be
covered with water.
Whether discharging into a sink or a standpipe check
that the end of the drain hose is neither too high nor too
low. The top of the curve in the hose’s end should be no
more than 90 cm, and no less than 60 cm above floor
level.
3 pin
Should a prolongation of the drain hose be unavoidable
this must never surpass 1.5 m and must be of the same
diameter as the original hose
P1039
Im portant
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
Levelling
Level the washing machine by loosening or tightening
the feet. Once in the right position fix the feet by
pushing the nuts against the base of the case
Accurate levelling prevents vibration, noise and
displacement of the machine during operation. After
levelling the machine, secure the feet by tightening the
ring nuts with the aid of a screwdriver.
Some vibration is inevitable, especially if mounted on a
wooden floor.
P0254
P0509
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
Sp ecial co nd it io ns
If the floor is carpeted with a deep-pile carpet or
covered with crumbly or soft material, insert a rigid
support base under the feet to prevent noise, vibration or
displacement. The base should protrude a few
centimetres beyond the edges of the machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Elect r ical co nnect io ns
Any electrical work required to install this appliance
should be carried out by a qualified electrician.or
competent person
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate. (the plate is sticked to the rear of the
appliance).
The appliance is supplied with a 10 amp plug fitted. In
the event of having to change the fuse in the plug
supplied, use a 10 Amp fuse.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
GREEN & YELLOW
Green and Yellow
Blue
- Earth
- Neutral
- Live
E
Brown
L
N
Connect the green and yellow (earth) wire to the
terminal in the plug which is marked with the letter «E»
BROWN
or the earth symbol
or coloured green and yellow.
BLUE
CORD CLAMP
P1041
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the plug
which is marked with the letter «L» or coloured red.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the plug.
A replacement cover/carrier must be obtained from your
local Zanussi Service Centre, whose address is listed in
the Customer Care Booklet which accompanies your
instruction manual
Per m anent co nnect io n
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3 mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
WARNING: a cut off plug inserted into a 10
amp socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
The switch must not break the yellow and green earth
cable at any point.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EPESL/Z - 3 4 5 6 7 8 9 10 11 12/98
Download from Www.Somanuals.com. All Manuals Search And Download.
|