132985450.qxd 18/07/2005 17:47 Pagina 1
WASHING MACHINE
ZJ 1218
1200
SPECIAL
COTTON
X
95º
900
700
500
60ºE
60º
40ºE
40º
SPIN
SPEED PREWASH DAIL
QUICK
WASH
SUPER
RINSE
EASY
IRON
DELA
START
Y
START
AUSE
ON/OFF
Y
P
30º
WOOL
30º
60º
40º
60ºE
30º
40º
30º
40º
DELICATES
SYNTHETICS
.
Z
J
1
2
1
8
Quick Installation Guide:
visit our WEB SITE to view an install video
GB
INSTRUCTION BOOKLET
132985450
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 3
Contents
Maintenance and Cleaning
Descaling
18-19
18
For the User
Important Safety Information
Your New Washing Machine
2
4
After each wash
Maintenance Wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
The dangers of freezing
Emergency emptying out
18
18
18
18
Description of the Appliance
Detergent dispenser drawer
Child safety feature
5
5
5
18
18-19
19
The Control Panel
6-9
10
19
Programme information
Something Not Working
Service and Spare Parts
Guarantee conditions
20-21
21-22
22
Operating sequence
11-12
11
Load the laundry
Measure out the detergent and the fabric softener
Switch the machine on
11
11
Select the required programme
11
Select the Spin speed or the RINSE HOLD option 11
For the Installer
Select the required options
Select the DELAY START
Start the programme
12
12
12
12
Installation Instructions
Technical Specifications
23
23
At the end of the programme
Unpacking
24
24
24-25
25-26
26
Positioning
Water inlet
Washing Hints
Which detergent?....
And in which form?
13-14
14
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
Building-in
14
Wash Care Symbols
Washing Programmes
15
26
26
27
16-17
19
28-29
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 4
Your New Washing Machine
Your new washing machine fitted with the Zanussi “JET SYSTEM”, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●
Automatic cooling of the wash water to 60°C
In the interest of the
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
environment
●
Materials marked with the symbol
recyclable.
are
●
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
●
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
The balance control device ensures that the
washing machine remains stable when spinning.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
●
Select an “economy” programme for lightly soiled
laundry.
●
A programme without prewash is sufficient for
normally soiled laundry.
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 5
Description of the Appliance
1 Detergent dispenser drawer
2 Programme guide
1200
SPECIAL
COTTON
X
95º
900
700
500
3 Control panel
4 Door opening handle
5 Filter
60ºE
60º
40ºE
40º
SPIN
SPEED PREWASH DAIL
QUICK
WASH
SUPER
RINSE
EASY
IRON
DELAY
START
START
PAUSE
ON/OFF
Y
30º
WOOL
30º
60º
40º
60ºE
30º
40º
30º
40º
DELICATES
SYNTHETICS
.
Z
J
1
2
1
8
6 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Programme chart
P0239S
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
P1131
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 6
The Control Panel
1200
900
700
500
SPECIAL
COTTON
X
95º
60ºE
60º
40ºE
40º
QUICK
WASH
SUPER
RINSE
EASY
IRON
DELAY
START
START
PAUSE
SPIN
SPEED PREWASH DAILY
ON/OFF
30º
WOOL
30º
60º
60ºE
40º
30º
40º
30º
40º
DELICATES
SYNTHETICS
.
Z
J
1
2
1
8
4
1
3
5 6 7 8 91011
2
13
14
12
1 Detergent dispenser drawer
2 Mains-on light
This light comes on when the ON/OFF button is
pressed, and goes out when it is pressed again.
Rinse Hold
When RINSE HOLD option is selected, the last rinse
water is not emptied out, to prevent the fabrics from
creasing. When the programme has finished, the light
of the START PAUSE button and the pilot light
(DOOR) go out, the light
and the pilot light
(END) are alight to
indicate that the water must be emptied out.
3 ON/OFF button
Press this button to switch the machine on. Press it
again to switch the machine off.
To empty out water there are 2 possibilities:
• Select programme
without spinning.
(draining):
The water is emptied out
Programme Option buttons
Depending on the programme, different functions can
• Select programme
reduce eventually
(spin) or
(delicate spin),
be combined. These must be selected after choosing the
desired programme and before depressing the START
PAUSE button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
the spin speed by means of the relevant button and
then depress the START/PAUSE button.
The water is emptied out and the laundry is spun at
the selected spin speed.
Attention! Before selecting programmes
(Drain),
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds and the message
Err is displayed.
(Spin) or
(delicate spin), the selector dial has to
be positioned on X (cancelling).
5 PREWASH button
4 SPIN SPEED button
Press this button to reduce the maximum speed of the
final speed proposed by the machine for the selected
The machine performs a prewash cycle at 30°C max.
The prewash cycle ends with a short spin at 650 r.p.m.
in programmes for Cotton and Synthetics, and with
emptying of the water for Delicates.
programme or to select position
(RINSE HOLD) .
The light corresponding to the selected option
illuminates.
This option is not available with the WOOL/(handwash)
programme
and miniprogram
.
For use when washing heavily soiled laundry.
The following speeds are available for the different
fabrics:
• COTTON, linen: 500/700/900 max 1200 r.p.m.
6 DAILY button
This option can be used used for lightly soiled cotton
or synthetic items items in order to obtain a good
washing performance in a short time.
• SYNTHETICS and WOOL/(handwash)
:
500/700 max 900 r.p.m.
• DELICATES and MINIPROGRAMME
:
500 max 700 r.p.m.
This option cannot be used with the Economy
programmes 60°E and E°40 and Miniprogram
and
also not in combination with QUICK WASH option.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 7
Cancelling the delayed start
7 QUICK WASH button
This option can be used for lightly soiled cotton,
synthetic or delicate items hat have been used or worn
for a short time.
● Depress START PAUSE button.
● Depress DELAY START button until «0’» is
displayed.
● Depress START PAUSE button again, if you wish to
This option is not available with the WOOL/
restart the machine immediately.
(handwash)
programme, the Energy saving
programmes (60°E and 40°E) and Miniprogram
.
It cannot be used also in combination with DAILY
option.
11 START/PAUSE button
This button has two functions: Start - Pause
Start
8 SUPER RINSE button
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
This option can be selected with all programmes, except
and Miniprogram . The
the WOOL/ HANDWASH
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
machine will add 2 rinses for cotton and 1 rinse for
synthetics and delicates.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
Pause
To interrupt a programme which is running, depress the
START PAUSE button: the corresponding pilot light
starts to flash.
9 EASY IRON button
Selecting this button the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform 6 rinses instead
of 3 for cotton and 4 rinses instead of 3 for synthetics.
This function can be used only for cotton and synthetic
fabrics.
To restart the programme from the point at which it was
interrupted, press the START PAUSE button again.
12 DISPLAY
The display shows the following information:
If this option is selected for cotton programmes, the spin
speed automaticaly will reduce to 900 rpm.
Reset/Cancelling - Duration of the programme -
Delayed start - Incorrect option selection - Alarm
code - End of programme.
If this option is selected for synthetic programmes with
a temperature of 60°C or 50°C, the machine will perform
a washing cycle at max 40°C.
Reset/cancellation of the programme
If the programme selector dial is turned to X position,
three blinking dashes are displayed.
Now you can select a new programme.
10 DELAY START button
The wash programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
(If the programme selector dial has not turned to X
position , when you press the ON/OFF button to switch
the machine on, the display will show a blinking zero.)
Selecting the delayed start
● Select the programme and the required options.
● Select the delay start.
● Depress START PAUSE button: the machine starts
its hourly countdown.
---
The programme will start after the selected delay has
expired. The DELAY START cannot be used with
(DRAIN),
(SPIN) or
(DELICATE SPIN)
programmes.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 8
Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes ( for example 2 .05 ).
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E 2 0 (see paragraph
“Something not working”).
2.05
E20
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
End of programme
When the programme has finished a flashing zero is
displayed. The door can be opened when the
(DOOR) pilot light has gone out and if the
HOLD) option has not been selected.
After the programme has started, the time remaining is
updated every minute.
(RINSE
Delayed start
The selected delay (23 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour and, when remain
the last 2 hours, each 30 min.
0
DELAY
START
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, the
(DOOR) pilot
Incorrect option selection
light and only the running phase light illuminate and
stay on.
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for
2 seconds.
When the programme has finished, the
(END) pilot
light comes on and the the
pilot light goes off.
(DOOR)
DOOR
PREWASH
WASH
RINSES
DRAIN
SPIN
CLOGGED
FILTER
END
8
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 9
Functions
End of programme
The
(DOOR) pilot light indicates if during the
washing cycle the door can be opened:
When the
(END) pilot light on the programme
• Light on: the door can be opened
(when the washing machine is set to PAUSE, the
(DOOR) pilot light will go off).
progress display illuminates, if the
light has gone out, the the door can be opened (if the
(RINSE HOLD) option has not been selected).
(DOOR) pilot
Turn the programme selector dial to X.
Switch the machine off by depressing the ON/OFF
button before removing the laundry.
• Light off: the door cannot be opened
(when the washing machine is set to PAUSE, the
(DOOR) pilot light will start to flash)
The
(END) pilot light flashes in the event of
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause the
washing machine by pressing the START PAUSE
button.
operating problems and the corresponding alarm code
appears on the display.
E 10
= the machine does not fill
= the machine does not empty
= the door has not been closed
E 2 0
E 40
Changing a running programme is possible only by
resetting it. Turn the programme selector dial to "X" and
then to the new programme position. The washing water
in the tub will not emptied out .
To eliminate the problem, see paragraph “Something not
working”.
If the
(FILTER CLOGGED) pilot light flashes at the
end of the programme this means that the drain filter
must be cleaned.
Start the new programme by depressing the START
PAUSE button.
Interrupting a programme
Depress the START PAUSE button to interrupt a
programme which is running: the corresponding light
starts to flash.
14 Programme selector dial
The selector is divided into 5 sections:
• COTTON,
Depress the same button to restart the programme.
• SYNTHETICS
• DELICATES
Opening the door after the programme has
started
You can open the door, after having set the washing
machine to PAUSE, provided the following conditions
exist:
• WOOL
(hand washing)
• Special programmes
• Reset programme X
SPECIAL
COTTON
• the washing machine has not heated beyond 55°C;
• the level of the water is not high;
• the drum is not turning.
X
95º
60ºE
60º
40ºE
40º
30º
If these requirements are met, the
will be on and, when you pause the washing machine, it
will goes out: the door can be opened.
(DOOR) pilot light
WOOL
30º
60º
60ºE
40º
30º
40º
30º
40º
DELICATES
SYNTHETICS
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the ON/OFF button.
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperatures of the
water in the washing machine!
programmes and position
to “cold wash”.
At the end of the programme the selector dial must
be turned to position X (reset).
When you close the door and press the ON/OFF button
again, the washing machine will resume the programme
from the point where it had been interrupted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 10
Programme information
WOOL (HANDWASH
)
= Drain
For emptying out the water of the last rinse in
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics
with the “hand washing” care symbol.
programmes with the
RINSE HOLD option.
Turn first the programme selector dial to X, then select
programme
and depress the START PAUSE button.
= Delicate Spin
= Spin
Separate short spin at 700 rpm for hand washed
synthetics, delicate and wollen garments. You can
reduce the speed by means of SPIN SPEED button to
adapt it to the fabrics to be spun.
Separate long xspin at the maximum speed for hand
washed cotton garments. You can reduce the speed by
means of SPIN SPEED button to adapt it to the fabrics
to be spun.
= Rinses
= Miniprogramme
With this programme it is possible to rinse and spin
cotton garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin
at 1200 r.p.m.
This is a complete programme that can be combined
with the following options: SPIN SPEED, RINSE
HOLD
and delayed start .
The spin speed can be reduced by depressing SPIN
SPEED button.
To be used for laundry which is lightly soiled or which
needs freshening up.
Max load 3 kg.
= Softeners
Washing temperature 30°C
Programme duration 30 minutes
Final spin speed 700 r.p.m.
Hand washed cotton garments can be softened with this
programme.
The machine performs 1 rinse, followed by a final spin
at the max. speed, which can be reduced by depressing
SPIN SPEED button.
X = Cancelling
To reset a programme turn the selector dial to X. Now
can a new programme be selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 11
Operating Sequence
Before the first wash, we recommend that you run a
3. Switch the machine on
To switch the machine on, press the ON/OFF button: the
mains-on light comes on. The display will show three
flashing dashes or ablinking zero.
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment
machine.
of the dispenser drawer and start the
---
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
0
ON/OFF
4. Select the required programme
Turn the programme selector dial to the desired
position: the display will show the duration of the
selected programme.
SPECIAL
COTTON
X
95º
P0004
60ºE
60º
40ºE
40º
2. Measure out the detergent
and the fabric softener
30º
2.05
WOOL
30º
60º
60ºE
40º
Pull out the dispenser drawer until it stops.
30º
40º
30º
40º
DELICATES
SYNTHETICS
Measure out the amount of detergent required and pour
it into the main wash compartment
If you have selected the PREWASH option, pour detergent
into the compartment marked
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
.
.
The lights corresponding to the different phases making
up the selected programme light on.
“MAX” mark in the drawer). Close the drawer gently.
5. Select the SPIN speed or RINSE
HOLD option
Depress the spin speed button to choose the required
speed or RINSE HOLD option
light comes on.
: the corresponding
1200
900
700
500
P0005
P0006
SPIN
SPEED
11
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 12
The machine starts operating. If a delayed start has been
selected, the countdown will start.
6. Select the required options
The light corresponding to the depressed button
illuminates.
START
PAUSE
QUICK
WASH
SUPER
RINSE
EASY
IRON
PREWASH DAILY
8. At the end of the programme
The machine stops automatically. The display shows a
blinking zero.
7. Select the DELAY START
To delay starting of the programme, press the DELAY
START button. The figures corresponding to the
selected delay will be displayed for about 3 seconds,
after which the duration of the selected programme will
appear on the display.
If the RINSE HOLD
door will be locked, the light of the START PAUSE
button and the (DOOR) pilot lights go out , the only
option has been selected, the
light remains lit to indicate that the water must be
drained before opening the door. The display shows a
flashing zero.
To empty out the water you can, after turning the
programme selector dial to X position:
DELAY
START
● select programme
(DRAIN), the water is emptied
out without spinning
● select programme
(SPIN) or
(DELICATE
SPIN). Select the spin speed by means of the relevant
button and then depress the START PAUSE button.
The water is emptied out and the laundry is spun at
the selected spin speed.
During this period it is possible to load other laundry:
● depress START PAUSE button;
● load the laundry;
At the end of the cycle, the light of the START/PAUSE
● close the door and depress START PAUSE button
again.
button and the
(DOOR) pilot light go out, and the
(END) light illuminates. The door can be opened.
Turn the programme selector dial to Reset X.
8. Start the programme
To start the selected programme, press the
Switch the machine off by pressing the ON/OFF button.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
START/PAUSE button; the corresponding light stops
flashing and the
(DOOR) pilot light illuminates.
The pilot light corresponding to the wash phase which is
running is on.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 13
Washing Hints
●
Do NOT overload the machine. Weigh the laundry the
Use a good quality detergent suitable for automatic
washing machines.
first few times you use the appliance.
●
●
Use the correct quantities of detergent.
The average weights of the most common items are
listed below as a guide:
For wool, use gentle detergent only in small
quantities.
1000g = 1 kg
●
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
Pillow case
Tablecloth
Serviette
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
●
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
garments are washed according to the instructions on
the garment label and those issued by the
Man’s shirt
Apron
manufacturer of this washing machine. M9605.
●
Load the laundry loosely alternating large items with
small ones.
●
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
●
Once you have finished using the machine, you are
advised to unplug it and turn off the water taps.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
●
When washing curtains, remove the hooks.
«JETSYSTEM» wash
Close poppers and zips and fasten loose buttons.
As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give you
exact recommandations as to the amount of detergent
that should be used for any one wash.
It is essential to wash new coloured items separately
when washing for the first time.
●
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends on
the packet or bottle, making the appropriate allowances
for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.
●
●
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 14
Which detergent?....
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the
detergent in the dispenser drawer.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOUREDS
For coloured items you should use a detergent which is
designed to clean while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
colours.
DELICATE ITEMS
When washing delicates such as
woollens, you should use a product which is specially
designed to care for fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
FABRIC CONDITIONERS
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may wish to use a
product such as Ace Gentle Bleach which is used in
addition to your chosen detergent. Ace is suitable for all
washable fabrics including silks,
marked with the symbol
Follow the
.
woollens and coloureds.
manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 15
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
Normal (Maximum)
Normal (Maximum)
FABRIC
White Cotton or Linen
without Special Finishes
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
60
50
Nylon, Polyester/Cotton, Viscose
with Special Finishes, Cotton/
Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Wool, wool mixtures, Silks
Do not machine wash
40
Much Reduced (Minimum)
Hand wash only
BLEACHING
Chlorine bleach may be used
IRONING
Cotten, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 16
Washing Programmes
Consumption*
Type of
fabric
Programme
description
Additional
functions
Max.
load
Section
Temp.
95°
Energy
Water
lt
Time
min
kWh
SPIN SPEED/ R. HOLD 5 kg
PREWASH, DAILY
QUICK, SUPER RINSE
EASY IRON
1.9
52
140
COTTON
Whites
Wash at 95°C
3 rinses
Normal spin
Wash at 60°C
3 rinses
*COTTON
60°E
60°
SPIN SPEED/ R. HOLD
PREWASH,
Whites
5 kg
5 kg
0.85
1.2
49
49
134
119
Economy
SUPER RINSE,
EASY IRON
Normal spin
Wash at 60°C
3 rinses
Normal spin
Whites and
Fast
coloureds
SPIN SPEED/ R. HOLD
PREWASH, DAILY
QUICK, SUPER RINSE
EASY IRON
COTTON
Wash at 40°C
3 rinses
5 kg
5 kg
0.95
0.7
49
49
139
116
Coloureds
Economy
SPIN SPEED/ R. HOLD
PREWASH,
COTTON
COTTON
40°E
SUPER RINSE,
EASY IRON
Normal spin
Non-fast
coloureds
Wash at 30°-40°
or cold wash
3 rinses
SPIN SPEED/ R. HOLD
PREWASH, DAILY
QUICK, SUPER RINSE
EASY IRON
30°-40°
(Cold)
Normal spin
Synthetics
SYNTHETICS
SPIN SPEED/ R. HOLD 2 kg
PREWASH, DAILY
QUICK, SUPER RINSE
EASY IRON
0.85
41
87
60°
Wash at 60°C
3 rinses
Delicate spin
Synthetics
SPIN SPEED/ R. HOLD
SYNTHETICS
SYNTHETICS
2 kg
0.5
41
38
87
77
60°E
Wash at 40°C
3 rinses
PREWASH, SUPER R.
EASY IRON
Economy
Delicate spin
Synthetics
2 kg
0.45
Wash at 30°-40°C
or cold wash
3 rinses
SPIN SPEED/ R. HOLD
30°-40°
PREWASH, DAILY
QUICK, SUPER RINSE
EASY IRON
(Cold)
Delicate spin
SPIN SPEED/ R. HOLD
Wash at 30°-40°C
3 rinses
DELICATES
WOOL
30°- 40° Delicates
2 kg
0.55
0.40
58
58
58
57
PREWASH
QUICK, SUPER RINSE
Delicate spin
30°- 40° Wool
SPIN SPEED/ R. HOLD 1 k g
Wash at 30°-40°C
or cold wash
3 rinses
(Handwash)
(Cold)
Delicate spin
* The “Cotton Whites Economy” programme at 60°E C is the reference programme for the data entered in the
energy label, in compliance with EC 92/75 standards.
This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature
for each programme.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 17
Special Programmes
Consumption*
Selector
dial
position
Additional
functions
Max.
load
Programme Programme description
Time
min
Energy
kWh
Water
lt
SPIN SPEED
6
Delicate Spin Separate spin at 700 rpm for
hand washed synthetics,
delicate and wollen
5 kg
-
-
garments
Rinses
SPIN SPEED/
RINSE HOLD
SUPER RINSE
EASY IRON
5 kg
5 kg
0.1
-
40
3 rinses with liquid additive
if required
Long spin
45
Softeners
Drain
SPIN SPEED/
RINSE HOLD
16
-
21
2
1 rinse with softener
Long spin
-
-
-
10
30
5 kg
2 kg
Spin
SPIN SPEED
-
Mini
programme
0.3
40
Wash at 30°C
2 rinses
SPIN SPEED/
RINSE HOLD
Short spin at 700 r.p.m.
X
Reset
For cancelling the wash
programme which is
running
-
-
-
This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 18
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
P0009
P0010
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
P1086
preserve the door seal.
Cleaning the drawer recess
Maintenance Wash
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
External cleaning
P0038
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning the filter
The water drain filter
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed.
A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after every
washing programme.
Place a container under the filter to catch any spillage. If
the filter is blocked and the machine is unable to drain
you will need to drain the water manually from the
machine at this stage. To do this, unhook the drain hose
from the standpipe or sink and hold the end of the hose
over a bowl on the floor. The water should drain by
gravity into the bowl. When the bowl is full, hook the
hose back up and empty the bowl. Repeat the procedure
until water stops flowing out.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 19
Unscrew and remove the filter.
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water tap.
●
Unscrew the inlet hose.
●
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hose in a bowl. Run the draining programme.
P0037
P0039
●
Disconnect the appliance.
●
Screw the inlet hose and reposition the drain hose.
Clean carefully under a fast running tap.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
●
pull out the plug from the power socket;
P0040
●
close the water tap;
●
if necessary, wait until the water has cooled down;
●
Unscrew and remove the filter;
Warning
●
place a bowl on the floor. The water should drain by
When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children being
able to remove it.
gravity into the bowl. When the bowl is full, empty
the bowl. Repeat the procedure until water stops
flowing out;
●
clean the filter if necessary as previously described;
●
screw the filter again.
The water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
P1090
19
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 20
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an
engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display and the
(END) starts to flash:
E 10
E 2 0
E 40
-
-
-
: problem with the water supply
: problem with water draining
: door open
Once the problem has been eliminated, press the START PAUSE button to restart the programme. If after all checks, the
problem persists, contact your local Service Force Centre.
Symptom
Possible causes
●
E 40
)
The machine does not start
The door has not been closed. (
●
The plug is not properly inserted in the power socket.
There is no current at the socket
The main fuse or the fuse in the plug has blown.
The selector dial is not correctly positioned.
The START PAUSE button has not been depressed.
The DELAY START has been selected
●
●
●
●
●
●
●
●
●
E 10
The machine does not fill
Ensure the water tap is open. (
The filter in the inlet hose is blocked. (
The inlet hose may be squashed or kinked. (
)
E 10
)
E 10
)
E 40
The door has not been closed. (
)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
E 2 0
The drain hose may be squashed or kinked. (
)
The machine does not empty and/or
does not spin
The RINSE HOLD option has been selected.
E 2 0
The drain filter may be blocked. (
)
The drain hose extension is not correct. Follow the instructions for
connecting to the waste.
●
●
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from one of the inlet hose fittings. It
is not always easy to see this as the water runs down the hose; check to
see if it is damp.
●
●
●
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
●
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Unsatisfactory washing results
●
●
●
Stubborn stains have not been treated prior to washing
The correct wash programme has not been selected.
Too much laundry has been placed in the drum.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 21
Symptom
Possible causes
●
The machine vibrates when spinning
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level.
The washing load is badly distributed in the drum.
●
●
●
●
Maybe there is very little laundry in the drum.
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water.
The drum is turning.
●
●
●
Spinning starts late or the machine
does not spin
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 10 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Service & Spare Parts
Working”.
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
0870 5 929929
For the address of your local Service Force Centre and
further information about Service Force, please visit the
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
For Customer Service in Ireland please contact us at the
address below:
5. The purchase date.
Zanussi
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
P
r o
o
d
. . . . . . . . . .
M
d
.
N o
.
.
. . . . . . . . . . .
S
e r
.
N
o
. . . . . . . . .
.
Republic of Ireland
Mod. ..........
Prod. No. ...........
Tel: +353 (0)1 4090751
Ser. No. .........
P0042 BD
Email: [email protected]
21
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 22
Customer Care Department
For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products, please
contact our Customer Care Department by letter or
telephone at the address below or visit our website at
Tel 08705 727 727*
* calls to this number may be recorded for training
purposes.
Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.
Customer Care Department - Zanussi
Major Appliances
Addington Way, Luton
Bedfordshire
LU4 9QQ
Guarantee Conditions
Standard guarantee conditions
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Products of Zanussi manufacture which are NOT
marketed by Zanussi.
We, Zanussi, undertake that if, within 24 months of the
date of the purchase, this Zanussi appliance or any part
thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option,
repair or replace the same FREE OF ANY CHARGE
for labour, materials or carriage on condition that:
●
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
●
The appliance has been used for normal domestic
●
The guarantee starts from the date you first
purchased your product.
The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
The guarantee relates to you and cannot be
transferred to another user.
Your new home is within the European Community
(EC) or European Free Trade Area.
The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
The product is installed taking into account
regulations in your new country.
purposes only, and in accordance with the
manufacturer’s instructions.
●
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
All service work under this guarantee must be
undertaken by an Zanussi Service Force Centre.
Any appliance or defective part replaced shall become
the Company’s property.
This guarantee is in addition to your statutory and other
legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
●
●
●
●
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
Exclusions
This guarantee does not cover:
●
Damage or calls resulting from transportation,
France
Germany
Italy
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 0434 39 4700
+46 (0) 8 672 53 90
08705 727 727
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Nurnberg
Pordenone
Stockholm
Luton
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
Sweden
UK
Ireland
Dublin
+353 (0) 1 4090751
22
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 23
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
82 cm
60 cm
54 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
WATER PRESSURE
Minimum
Maximum
0.05 MPa
0.80 MPa
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool (Handwash
5.0 kg
2.5 kg
2.5 kg
2.0 kg
)
SPIN SPEED
Maximum
1200 rpm
CONSUMPTION DATA FOR WASHING
5 KG of NORMALLY SOILED COTTON
ITEMS WITH THE ECONOMY
PROGRAMME 60°E
Energy
Water
Time
0.85 kWh
49 litres
145 mins
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 24
Set the machine upright and remove the two remaining
bolts from the back.
Unpacking
Pull out the three plastic spacers from the holes into
which the bolts were fitted.
Plug the open holes with the plugs supplied with the
instruction booklet.
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the rear right bolt.
Lay the machine gently on its back, making sure that the
hoses are not squashed.
P0020
P0256
Positioning
Install the machine on a flat hard floor.
P0255
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
Remove the polystyrene base and take off the bottom
panel by unscrewing the central screw. Carefully slide
out the right polythene bag.
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
P0457
P0015
Repeat the operation for the left and central polythene
bags.
Re-fit the bottom panel using the 4 screws supplied with
the door hinges (in the plastic bag) and the previously
removed screw.
Water inlet
Connect the hose to a tap with a 3/4’’ thread.
Do not use previously employed hoses.
Installation should comply with local water authority
and building regulations’ requirements.
P0453
P0016
The appliance must be connected to a cold water
supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 25
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
3 pin
There should be a minimum distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
Set the hoses correctly by loosening the ring nuts. After
positioning the inlet hoses, be sure to tighten the ring
nuts again to prevent leaks.
P1039
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
P1088
P0021
If your drain hose looks like this (see below) you do not
require the “U” piece”. Just push the hose firmly into
the standpipe.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
P1212
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
U piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
P1197
38 mm (11.2)
standpipe
diameter
P1074
25
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 26
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Loop
P1198
Note
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
The joining piece must have an internal diameter of 18mm.
Important
In the interest of the environment
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
If you require any further advice please contact your
local water authority.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
SHOWER
P1051
SINK TOILET
BATH
BIDET
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
Some vibration is inevitable, especially if mounted on a
wooden floor.
SURFACE WATER
FOUL SEWERS
DRAINS & SEWERS
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
TREATED
DISCHARGE
RIVER
RIVER
P0987
26
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 27
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal «N» or coloured black.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
Should the appliance power supply cable neeed to be
replaced, this must be carried out by our Service
Force Centre.
P
r o
o
d
M
d
.
N
.
. . . . . . . . . .
o
. . . . . . . . . . .
.
S e
r
.
N
o
.
.
.
.
. . . . . .
Mod. ..........
Note
Prod. No. ...........
Ser. No. .........
P0042 BD
When the appliance is installed the power supply cable
must be accessible.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
The switch must not break the yellow and green earth
cable at any point.
Brown
GREEN & YELLOW
E
L
N
BROWN
BLUE
CORD CLAMP
P1041
27
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 28
The height (C-Fig. C) depends on the height of the
adjacent furniture's base.
Building-in
This appliance has been designed to be built into the
35 Ø 12.5-14 depth
kitchen furniture.
The recess should have the dimensions shown in picture
A.
600
600
22+1,5
min.
596
570
515
595-598
C
P0422S
541
8
b) Hinges
90
490
A
P0965
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5-14 mm depending on the depth
of door furniture) on the inner side of the door. The
distance between the holes hobs fixing centres must be
416 mm.
The distance (B) from upper edge of the door to the
centre of the hole depends on the adjacent furniture's
dimensions.
When installing the appliance into the kitchen furniture
ensure, if possible, the hoses are placed in either of the
two recesses on the back of the appliance. This will help
to prevent the hoses from becoming kinked or trapped.
Picture AB.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of screws
for wood (2-Fig. B) supplied with the appliance.
c) Mounting the door
Fix the hinges (1) to the machine by means of the M5x8
screws (3-Fig. B). The hinges can be adjusted to
compensate for possible uneven thickness of the door.
To align the door perfectly it is necessary to loosen the
screw (3-Fig. B), adjust the door and tighten the screw
again.
Preparation and assembly of the door
The machine is originally pre-arranged for the assembly
of a door opening from right to left.
In this case it is sufficient to screw in the hinges (1) and
the counter-magnet (6) provided with the appliance, at
the right level (Fig. B).
d) Counter-magnet (6)
The appliance is pre-arranged for a magnetic closure of
the door. To enable a correct operation of this device, it
is necessary to screw the counter-magnet (6) (steel disk
+ rubber ring) into the inner side of the door.
Its position must correspond to the magnet (4) on the
appliance (see picture D).
6
4
1
7
5
3
6
2
B
P0982
4
a) Door
The dimensions of the door should be:
- width 595-598 mm
- thickness 16-22 mm
D
P0984
28
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 29
If the door has to be opened from left to right, invert the
position of the plates (7), the magnet (4) and the plate
(5) (Fig. B and E). Mount the countermagnet (6) and the
hinges (1) as previously described.
Position the base into the recess with its front edge as
far forward as the adjoining plinth line will allow.
The reason for placing the base in this position is to
allow a small strip of beading to be fitted in front of
the appliance feet.
E
6
Fix the base firmly to the floor using four appropriate
countersunk screws (see Fig. H).
4
1
5
7
3
2
P0983
Hardwood strip
5 X 25 X 605
5 mm x 25 mm
490
600-605
H
Recommendations regarding the
construction and fitting of a base
when the installation requires an
integrated appliance to be raised
With the appliance installed adjust all four feet ensuring
the machine is stable, and a clearance of approximately
5 mm is left between the top of the machine and the
underside of the worktop.
Where the appliance has been raised by mounting onto
a wooden base provided by the installer. The material
used to construct the base should have a non slip
surface, be water repellent and if possible be one solid
piece.
A final check for stability should be carried out with the
machine on spin with a load, this will identify the need
for any further fine adjustment to the feet.
A strip of beading approximately 605 mm W, x 5 mm
H, x 25 mm D must be screwed down into the base
directly in front of the machine’s feet, this will provide
additional security.
If it is not possible to use one solid piece, due to the
additional height required, ensure that any additional
strips of timber are glued and screwed to the underside
of the base (see Fig. F).
If required an additional door magnet, part number
1242394-00/3 and disc, part number 1242393-00/5 are
available from spare parts.
5 mm Hardwood strip
Additional pieces of
timber should run
40 mm
from front to back
100 mm
600-605 mm
Front view
F
Drill four fixing holes see Fig. G
600-605 mm
490 mm
95 mm
Front edge
50 mm
Top view
G
29
Download from Www.Somanuals.com. All Manuals Search And Download.
132985450.qxd 18/07/2005 17:47 Pagina 30
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.
© Electrolux plc 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
|