Zanussi Range ZEA 85 User Manual

E LE CTRIC HOB  
ZE A 85  
INSTRUCTION BOOKLE T  
Please read this instruction booklet before using the appliance  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Im port an t Safet y In form at ion  
You MUST read t h ese warn in gs carefu lly before in st allin g or u sin g t h e h ob.  
If you n eed assist an ce, con t act ou r Cu st om er Care Depart m en t  
on 08705 727727  
In st allat ion  
This hob must be installed by qualified personnel,  
according to the manufacturer’s instructions and  
to the relevant British Standards.  
Never use plastic or aluminium foil dishes on the  
hob.  
Perishable food, plastic items and areosols may be  
affected by heat and should not be stored above or  
below the hob unit.  
Remove all packaging before using the hob.  
Ensure that the electrical supply complies with the  
type stated on the rating plate, located on the  
bottom of the hob.  
Do not attempt to modify the hob in any way.  
Service  
This hob should only be repaired or serviced by an  
authorised Service Engineer and only genuine  
approved spare parts should be used.  
Ch ild Safet y  
This hob is designed to be operated by adults. Do  
not allow children to play near or with the hob.  
The hob gets hot when it is in use.  
En viron m en t al In form at ion  
Children should be kept away until it has cooled.  
After installation, please dispose of the packaging  
with due regard to safety and the environment.  
Children can also injure themselves by pulling  
pans or pots off the hob.  
When disposing of an old appliance, make it  
unusable, by cutting off the cable.  
Du rin g Use  
This hob is intended for domestic cooking only. It  
is not designed for commercial or industrial  
purposes.  
Do not use this hob if it is in contact with water.  
Do not operate the hob with wet hands.  
Ensure the control knobs are in the ‘OFF’ position  
when not in use.  
When using other electrical appliances, ensure the  
cable does not come into contact with the hot  
surfaces of the hob.  
Unstable or misshapen pans should not be used on  
the hob as unstable pans can cause an accident by  
tipping or spillage.  
Keep t h is in st ru ct ion book for fu t u re  
referen ce an d en su re it is passed on  
t o an y n ew own er.  
Never leave the hob unattended when cooking  
with oil and fats.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Con t en t s  
For the Installer  
For the User  
Tech n ical Dat a  
Page 1 1  
Descript ion  
of t h e Hob  
Page 5  
Page 6  
Im port an t Safet y  
Requ irem en t s  
Page 1 1  
Page 1 2  
Page 1 2  
Operat ion  
In st allat ion  
Bu ildin g In  
Main t en an ce  
an d Clean in g  
Page 8  
Page 9  
Page 9  
Som et h in g Not  
Work in g?  
Elect rical Con n ect ion Page 1 4  
Wirin g Diagram Page 1 5  
Service an d  
Spare Part s  
Gu aran t ee Con dit ion s Page 1 0  
Guide to Use the instructions  
The following symbols will be found in the text to  
guide you throughout the Instructions:  
Safety Instructions  
Step by step instructions for an  
This appliance is manufactured according  
to the following EEC directives:  
73/23 EEC - 90/683 EEC - 93/68 EEC -  
89/336 EEC current edition.  
operation  
Hints and Tips  
i
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Descript ion of t h e Hob  
3
1
2
5
6
7
4
8
9
10  
1. Hob Top  
2. Normal Hotplate - 1570 W/180 mm dia.  
3. Normal Hotplate - 1040 W/145 mm dia.  
4. Rapid Hotplate - 1570 W/145 mm dia.  
5. Rapid Hotplate - 2090 W/180 mm dia.  
6. Control knob for back left hotplate  
7. Control knob for back right hotplate  
8. Control knob for front right hotplate  
9. Control knob for front left hotplate  
9. Electric Hotplates Control Light  
WHEN THE HOB IS FIRST INSTALLED  
INSTALLATION  
Once the hob has been installed, it is  
important to remove any protective  
materials, which were put on in the factory.  
The hob must be installed according to the  
instructions supplied.  
The hob must be installed by qualified  
personnel to the relevant British Standards.  
Please, ensure that, once the hob is  
installed, it is easily accessible for the  
engineer in the event of a breakdown.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operat ion  
ELECTRIC HOTPLATES  
To switch on a hotplate, turn the relevant control  
knob anticlockwise to the required heat setting.  
The control knob is numbered 1 - 6  
0 - OFF  
1 - Minimum  
6 - Maximum.  
The hob has two types of hotplates:  
Normal Hotplates  
We recommend the plates are switched to maximum  
(6) for a short while to boost the plate, and then  
adjusted to the required setting.  
Rapid Hotplates  
The rapid hotplates are indicated by a red dot, and  
will heat up more quickly than a normal plate. As the  
red dots are painted on the plate, they may deteriorate  
during use and even disappear completely after a  
period of time. This will not affect the performance  
of the hob.  
It is important to note that the plate may smoke  
i
a little and produce a slightly unpleasant odour  
when used for the first time. This is quite  
normal and will disappear after a few minutes.  
Suggestions for the correct setting of the plates are  
given in the following table.  
OFF  
0
1
Very Gentle  
To keep food warm  
To melt butter and chocolate  
Gentle  
Slow  
2
3
4
To prepare cream-sauces,  
stews and milk puddings  
or to fry eggs  
Dried vegetables, frozen  
food, fruit, boling water  
or milk  
Medium  
Boiled potatoes, fresh  
vegetables, pâtés, soups,  
broths, pancakes or fish  
High  
Fast  
5
6
Larger stews, meat roll, fish,  
omelettes, steaks  
Steaks, escalopes and frying.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints and Tips  
i
Saucepans for use on solid plates should have several  
characteristics:  
They should be fairly heavy duty  
They should fit the heat area exactly, or be slightly  
larger for efficient use, NEVER smaller.  
They should have a flat base to ensure good  
contact with the plate.  
This is particularly important when using pans for  
high temperature frying or pressure cooking.  
As soon as liquid starts boiling, turn down the plate  
control knob so that it will barely keep the liquid  
simmering.  
You can switch off the plate a short while before you  
finish cooking, and the final stage will be completed  
on the accumulated heat. Similarly, stews etc. cooked  
in well covered saucepans cook at lower temperature  
which is more economical.  
Ensure pans are large enough to avoid  
liquids being split onto the plates.  
Never leave the plates on without a pan on  
them or with an empty pan on them.  
Take care never to lean or reach over a hot  
electric plate. Always point pan handles  
inward or over the work surface next to the  
hob to avoid accidentally knocking over a  
pan as you pass by.  
Take care when frying food in hot oil or fat,  
as the overheated splashes could easily  
ignite.  
If the control knobs become difficult to turn,  
please contact your local Zanussi Service  
Force Centre.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main t en an ce an d Clean in g  
Before any maintenance or cleaning can be  
carried out, you must DISCONNECT the  
hob from the electricity supply.  
The hob is best cleaned whilst it is still warm, as  
spillage can be removed more easily than if it is left  
to cool.  
The Hob Top  
Regularly wipe over the hob top using a soft cloth  
well wrung out in warm water to which a little  
wasing up liquid has been added. Avoid the use of the  
following:  
- household detergent and bleaches;  
- impregnated pads unsuitable for non-stick saucepans;  
- steel wool pads;  
- bath/sink stain removers.  
Should the hob top become heavily soiled, it is  
recommended that a cleaning product such as Hob  
Brite or Bar Keepers Friend is used.  
The control knobs may be removed by carefully  
pulling them upward for easier cleaning.  
The Hotplates  
Spills onto the actual plate should be removed using  
warm water and a soft brush, nylon or plastic scourer.  
To keep the plates looking as new, hotplate  
conditioner can be purchased from most hardware  
stores, e.g. "4 Hob" by HomeCare Products (follow  
the manufacturer's instruction for use).  
Alternatively, wipe the plates with a drop of olive oil  
on a kitchen towel to avoid rust. It is important to  
note that the plate will smoke a little and produce a  
slightly unpleasant odour when next used.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Som et h in g Not Work in g?  
If the hob is not working correctly, please carry out the following checks before contacting your local  
Zanussi Service Force Centre.  
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
SYMPTOM  
SOLUTION  
The plate does not heat up.  
Check that the unit is plugged in and the electrical  
supply is switched on  
Check that the RCCB has not tripped (if fitted)  
Check the mains fuse has not blown  
Check the correct control knob has been turned.  
The plate is not giving satisfactory results  
Check the plate is clean and dry  
Check the cooking pan is the correct size for the plate.  
Check the cooking pan has a flat bottom  
Check the setting is correct for the type of cooking.  
Please note that it will be necessary to provide proof  
of purchase for any in-guarantee service calls.  
If after all these checks, the oven still does not work,  
contact your local Zanussi Service Force Centre.  
When you contact them, they will need the following  
information:  
1. Your name, address and post code.  
2. Your telephone number  
3. Clear and concise details of the fault  
4. The model and the serial number (which can be  
found on the rating plate)  
In-guarantee customers should ensure that the  
above checks have been made as the engineer will  
make a charge if the fault is not a mechanical or  
electrical breakdown.  
5. Date of purchase  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service an d Spare Part s  
CUSTOMER CARE  
For general enquiries concerning your Zanussi  
appliance, contact our Customer Care Department by  
letter or telephone as follows:  
If you require spare parts or an engineer contact your  
local Service Force Centre by telephoning:  
Customer Care Department  
ZANUSSI  
55-77 High Street  
Slough  
0870 5 929929  
Your call will be routed to your local Service Force  
Centre.  
Berkshire, SL1 1DZ  
Tel: 08705 727727  
Peace of Min d for 2 4 Mon t h s  
* Appliances found to be in use within a  
ZANUSSI GUARANTEE CONDITIONS  
commercial or similar environment, plus those  
which are the subject to rental agreements.  
* Products of Zanussi manufacture which are not  
marketed by Zanussi.  
We, Zanussi, undertake that if, within 24 months of  
the date of the purchase, this Zanussi appliance or  
any part thereof is proved to be defective by any  
reason only of faulty workmanship or materials, we  
will, at our option, repair or replace the same FREE  
OF ANY CHARGE for labour, materials or carriage  
on condition that:  
Eu ropean Gu aran t ee  
If you should move to another country within Europe  
then your guarantee moves with you to your new  
home subject to the following qualifications:  
* The appliance has been correctly installed and  
used only on the gas and electricity supply stated  
on the rating plate.  
* The guarantee starts from the date you first  
purchased your product.  
* The guarantee is for the same period and to the  
same extent for labour and parts as exist in the  
new country of use for this brand or range of  
products.  
* This guarantee relates to you and cannot be  
transferred to another user.  
* The appliance has been used for normal domestic  
purpose only, and in accordance with the  
manufacturer's instructions.  
* The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with by any  
person not authorised by us.  
* Your new home is within the European  
Community (EC) or European Free Trade Area.  
* The product is installed and used in accordance  
with our instructions and is only used  
domestically, i.e. a normal household  
* The product is installed taking into account  
regulations in your new country.  
* All service work under this guarantee must be  
undertaken by a Zanussi Service Centre.  
* Any appliance or defective part replaced shall  
become the Company's property.  
* This guarantee is in addition to your statutory and  
other legal rights.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside  
these hours, in which case a premium will be  
charged.  
Before you move, please contact your nearest  
Customer Care centre, listed below, to give them  
details of your new home. They will then ensure that  
the local Service Organisation is aware of your move  
and able to look after you and your appliances.  
Exclu sion s  
This guarantee does not cover:  
France  
Senlis  
+33 (0)3 44 62 29 99  
* Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any  
light bulbs or removable parts of glass or plastic.  
* Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliance  
outside the United Kingdom.  
Germany Nürnberg +49 (0)911 323 2600  
Italy  
Sweden  
UK  
Pordenone +39 (0)1678 47053  
Stockholm +46 (0)8 738 79 50  
Slough  
+44 (0)1753 219897  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In st ru ct ion s for t h e In st aller  
Im portant safety requirem ents  
Engineer technical data  
This hob must be installed in accordance with the IEE  
Wiring Regulations (Current Edition).  
Detailed recommendations are contained in the  
following British Standards Codes Of Practice: B.S.  
6172/ B.S. 5440, Par. 2 and B.S. 6891 Current  
Editions.  
OVERALL DIMENSIONS  
Width:  
Depth:  
Height:  
Weight:  
580 mm.  
500 mm.  
88 mm.  
11 Kg.  
CUT OUT DIMENSIONS  
Location  
This hob has been registered as a "Class X" appliance  
according to Fire Risk Regulations. Minimum  
distances detailed below must be observed.  
The hob may be located in a kitchen, a kitchen/diner  
or bed sitting room, but not in a bathroom or shower  
room.  
Width:  
Depth:  
Thickness: 30 mm.  
550 mm.  
470 mm.  
SUPPLY CONNECTIONS  
Before making the cut out in the worktop ensure that  
there is a minimum distance of 55 mm. between the  
rear edge of the hob and the wall. A minimum  
distance of 100 mm. must be left between the side  
edges of the hob and any adjacent cabinets or walls.  
The minimum distance combustible material can be  
fitted above the hob in line with the edges of the hob  
is 420 mm. If it is fitted below 420 mm. a space of 50  
mm. must be allowed from the edges of the hob.  
The minimum distance combustible material can be  
fitted directly above the hob is 700 mm.  
Electric:  
230-240V 50Hz AC electrical supply.  
This appliance complies with the EEC Directive No  
89/336, concerning suppression of radio electrical  
interference.  
Heat in g elem en t s Rat in gs  
Normal front left Hotplate Ø 180 mm  
Normal back left Hotplate Ø 145 mm  
Rapid front right Hotplate Ø 145 mm  
Rapid back right Hotplate Ø 180 mm  
Total rating  
1570 W  
1040 W  
1570 W  
2090 W  
6270 W  
INSTALLATION GUIDANCE INSTRUCTIONS  
INSTALLATION GUIDANCE INSTRUCTIONS  
CLEARANCES REQUIRED  
CLEARANCES REQUIRED  
WHEN FITTING THE HOB  
WHEN FITTING THE HOB  
WITH A COOKER HOOD ABOVE  
WITHOUT A COOKER HOOD ABOVE  
700 mm  
650 mm  
420 mm  
420 mm  
55 mm  
55 mm  
50 mm  
420 mm  
420 mm  
100 mm  
100 mm  
50 mm  
50 mm  
FO 0812  
FO 0813  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In st allat ion  
Rect an gu lar cu t -ou t size for h ob  
IMPORTANT  
This hob must be installed by qualified  
personnel to the relevant British Standards.  
580  
500  
The manufacturer will not accept liability,  
should the above instructions or any of the  
other safety instructions incorporated in  
this book be ignored.  
Cut O ut Size  
The dimensions of the cut-out are given in the  
diagram.  
550  
470  
55 min.  
FO 2109  
ON/OFF SWITCH  
1
Bu ildin g In  
FLEX  
OUTLET  
Building over a cupboard or drawer  
If the hob is to be installed above a cupboard or  
drawer it will be necessary to fit a heat resistant board  
below the base of the hob on the underside of the  
work surface.  
It is also recommended to carry out the electrical  
connection to the hob as shown in diagrams 1 and 2.  
FO 0763  
ON/OFF SWITCH  
2
FLEX  
OUTLET  
FO 0764  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Building over a kitchen unit with door  
3
Proper arrangements must be taken in designing the  
furniture unit, in order to avoid any contact with the  
bottom of the hob which can be hot when in  
operation. The recommended solution is shown in  
diagram 3.  
a
60  
The panel fitted under the hob ("a") should be easily  
removable to allow easy access if technical assistance  
is needed. The space behind the kitchen unit ("b") can  
be used for connections.  
b
FO 1013  
Dimensions are given in mm.  
Fitting the hob to the worktop  
Before fitting the hob into the cut out, a sealing  
gasket supplied with the hob must be fitted to the  
edge of the cut out. It is essential that no gaps are left  
in this seal in order to prevent spillage near the hob  
seeping into the cabinet below.  
1) Place the sealing gasket all around the edge  
Seal  
a
of the cut out.  
2) Place the hob into the cut out and secure it by  
means of the relevant fixing clamps and  
screws, as shown in the diagram.  
FO 0199  
3) Remove the excess seal  
The edge of the hob forms a double seal which  
prevents the ingress of liquids.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Elect rical con n ect ion s  
The hob should be connected to a double pole switch  
Any electrical work required to install this  
hob should be carried out by a qualified  
electrician or competent person, in  
with a minimum gap of 3 mm. between the switch  
contacts and of a type suitable for the required load in  
compliance with the current electric regulations. The  
switch should be sited within 2m of the hob and be  
easily accessible upon completion of the installation.  
accordance with the current regulations.  
THIS HOB MUST BE EARTHED.  
The switch must not break the yellow and green earth  
cable at any point.  
Th e m an u fact u rer declin es an y liabilit y  
sh ou ld t h ese safet y m easu res n ot be  
observed.  
Ensure that the hob supply cord does not  
come into contact with surfaces with  
temperatures higher than 50 deg. C.  
Th is h ob is design ed t o be con n ect ed t o a  
2 3 0 -2 4 0 V 5 0 Hz AC elect rical su pply.  
Supply Cable Specifications  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the hob rating  
plate. The rating plate is located on the bottom of the  
hob. A copy is attached on the back cover of this  
book.  
For Uk u se on ly  
Connection Min. size  
Cable / flex Fuse  
via  
Cable/flex type  
• Cooker  
Control  
Circuit  
6 mm2  
PVC/PVC 30 A  
twin and  
earth  
The hob is supplied without supply cord. A 3 core  
flexible supply cord must be fitted, in accordance  
with the specification given in the relevant tables.  
For Eu rope u se on ly  
Min. size Cable/flex Cable / flex type Fuse  
1) Remove the mains terminal cover plate from  
the underside of the hob, to expose the mains  
terminal block.  
4 mm2  
H05 RR-F  
30 A  
2) Loosen the two cable clamp screws and lift  
the top section of the clamp enough to allow  
the cable to be passed through.  
3) Connect the red (live) wire to the terminal  
which is marked with the letter "L".  
4) Connect the black (neutral) wire to the  
terminal which is marked with the letter "N".  
L
N
5) After fitting a green or yellow/green sleeve  
over the bare copper wire (earth wire), connect  
the exposed end to the terminal which is  
marked with the earth symbol  
or with the  
letter "E"coloured green and yellow.  
NOTE:  
The earth wire should be about 2 cm. longer  
than the live and neutral wires.  
FO 0306  
6) Secure the cable by means of the clamp screws  
and refit the terminal block cover.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wirin g diagram  
N
Ø 145  
Ø 180  
Ø 145  
Ø 180  
4
3
2 1  
4
3
2 1  
4
3
2 1  
4
3
2 1  
1
2
3
4
P
P
P
P
2
4
3
1
2
5
2
4
3
1
2
5
2
4
3
1
2
5
2
4
3
1
2
5
P
P
P
P
1
1
1
1
P
P
P
P
3
3
3
3
PLATE  
L
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weslo Treadmill WATL139060 User Manual
Weslo Treadmill WATL268060 User Manual
Westcott Camera Accessories 1819 User Manual
Whirlpool Microwave Oven YMT3115SH User Manual
Whirlpool Water Heater AKT 466 User Manual
Yamaha Guitar BB 604 User Manual
Zanussi Oven 238002 User Manual
Zanussi Oven ZDQ495 User Manual
Zanussi Range ZCG 611 User Manual
Zipper Mowers Automobile Parts 309 355 User Manual