DISHWASHER
ZT 6910
UK
INSTRUCTION BOOK
152977 15/2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before
installing or using the appliance.
G When finishing loading or unloading close the
Installation
door, as an open door can be a hazard.
G This appliance is heavy. Care should be taken
G Do not sit or stand on the open door.
when moving it.
G Isolate the appliance from the power supply and
G It is dangerous to alter the specifications or
turn off the water supply after use.
attempt to modify this product in any way.
G Care should be taken when cleaning the bottom
G Care must be taken to ensure that the appliance
door seal and hinge area as any exposed metal
does not stand on the electrical supply cable.
edges may cut if care is not taken.
G Any electrical work required to install this
G This product should be serviced by an authorised
appliance should be carried out by a qualified
Service engineer, and only genuine spare parts
electrician or competent person.
should be used.
G Any plumbing work required to install this
G Under no circumstances should you attempt to
appliance should be carried out by a qualified
repair the machine yourself. Repairs carried out
plumber or competent person.
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service
Force Centre. Always insist on genuine spare
Child Safety
parts.
G This appliance is designed to be operated by
adults.
Conservation
Children should not be allowed to tamper with the
controls or play with the product.
In the interest of the environment:
G Keep all packaging well away from children.
G Materials marked with the symbol
are
G Keep all detergents in a safe place out of
recyclable.
children's reach.
G Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
During Use
G When the appliance is to be scrapped, cut off the
power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.
G Items that are contaminated by petrol, paint, steel
or iron debris, corrosive, acidic or alkaline
chemicals must not be washed in this dishwasher.
G Under no circumstances should you open the
door whilst the appliance is in operation. Always
turn off the appliance before opening the door.
G Help to keep your country tidy - use authorised
disposal sites for your old appliance.
G Only use detergent specifically designed for use in
dishwashers.
G Long bladed knives stored in an upright position
are a potential hazard.
G Long and/or sharp items of cutlery such as
carving knives must be positioned horizontally in
the upper basket.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1. Levelling spacers
2. Upper basket stop
3. Upper spray arm
1
13
12
4. Salt container
5. Large filter
2
3
6. Detergent dispenser
7. Control panel
8. Rating plate
11
10
4
5
9. Rinse aid dispenser
10. Central filter
6
9
11. Lower spray arm
12. Upper basket
8
7
13. "SID" detergent dispenser
(Super Intensity Dispenser)
IN84
The control panel
1. ON-OFF push button
2. Indicator lights
5. "HALF LOAD" push button
By pressing this push button, washing can be
confined to a single basket.
The indicator light corresponding to the
selected basket comes on.
RINSE AID refilling indicator light
Illuminates when the rinse aid has run out, and
requires refilling.
If both indicator lights are off, washing
will be carried out in both baskets.
This option is useful and economical when
only a few dishes need washing.
SALT refilling indicator light
Illuminates when the salt has run out, and the
salt container requires refilling.
Remember to load all the dishes into the
selected basket.
SID indicator light
Illuminates when a programme with prewash is
selected.
This option is not available with
programmes 1 (Rinse and Hold) and
10 (Plate warmer).
3. Digital display
4. "PROGRAMMES SELECTION" push
button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
To deactivate these audible signals, press
simultaneously both "PROGRAMMES
SELECTION" and "DRY" push buttons for at least 5
seconds at the end of which 3 short intermittent
audible signals inform you that the audible signals
have been deactivated.
6. "DRY" selection push button
By pressing this push button you can opt to
shorten (ECO DRY) or completely eliminate
(NO DRY) the heating phase during the last
rinse, so making a considerable energy saving.
The indicator light corresponding to the
selection will come on.
This option is not available with programmes 1
(Rinse and Hold) and 10 (Plate warmer).
If "NO DRY" is selected the supply of rinse
aid is automatically excluded.
If both indicator lights are off, the full drying
cycle will be carried out.
SO256
To reactivate these audible signals, press
simultaneously both "PROGRAMMES
SELECTION" and "DRY" push buttons for at least 5
seconds at the end of which 3 short intermittent
audible signals inform you that the audible signals
have been reactivated.
7. "DELAY START" push button
Allows the start of the programme to be
delayed by a minimum of 1 hour, up to 12
hours.
Both operations (to deactivate or
reactivate the audible signals) can be
carried out before starting or during a
washing programme.
8. "CANCEL" push button
(See page 16)
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short "instruction accepted" signal
When any of the push buttons are pressed
(except the ON/OFF push button), a
short audible signal informs you that the machine
has accepted the instruction given.
Long "programme run" signal
Acontinuous audible signal informs you, once
closed the door, that the washing programme is
starting.
Intermittent "end of programme" signal
Ashort intermittent audible signal informs you
that the washing programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm
systems to help you determine the cause of any
problems (see "Something not working").
An intermittent audible signal informs you that
an alarm is activated.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections
comply with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and
then fill with salt
5. Fill the rinse aid dispenser.
Water hardness
French
6. Run a "Rinse and Hold" programme.
PPM
Use of
salt
Clarke
Level
(Parts per
Million)
degrees
(°TH)
degrees
Setting the water softener
0 - 80
0 - 6
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the
water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
0 - 8
9 - 14
NO
0
1
2
3
4
5
6
7
8
9
81 - 140
7 - 10
YES
YES
YES
YES
YES
YES
YES
YES
YES
141 - 200
201 - 300
301 - 400
401 - 500
501 - 600
601 - 700
701 - 800
801 - 1200
11 - 14
15 - 21
22 - 28
29 - 35
36 - 42
43 - 49
50 - 56
57 - 84
15 - 20
21 - 30
31 - 40
41 - 50
51 - 60
61 - 70
71 - 80
81 - 120
The higher the content of these salts, the harder
your water is.
Water hardness is measured in equivalent scales,
Clarke degrees, French degrees and PPM (parts per
Million).
The softener should be adjusted according to the
hardness of the water in your area. Your local Water
Authority can advise you on the hardness of the
water in your area.
The dishwasher is factory set at level 4.
If your water is level 0 it is already soft
and therefore there is no need to use salt.
With the setting of the water softener at
level 0 the salt indicator light on the
control panel will always remain off.
Use salt from level 1 upwards.
If this level is not suitable for your area the softener
should be adjusted.
The adjustment of the water softener is
possible only with the machine in setting
mode.
To select a different level proceed as
follows:
1. Press "HALF LOAD" and "DRY" push buttons
simultaneously for about 5 seconds. In the
display appears a "L" followed by a number
which corresponds to the current level.
2. Press within 5 seconds the "DRY" push button
(the NO DRY indicator light flashes) as many
times as necessary until the required level
appears in the display. The level increases by 1
each time the push button is pressed.
SO257
3. 5 seconds after this push button has last been
pressed, the dishwasher memorises the level
selected and returns to the programme setting
mode.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with salt
Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the water
softener.
Only fill with salt just before starting one
of the complete washing programmes.
This will prevent any grains of salt or salty
water, which may have been spilled,
remaining on the bottom of the machine
for any period of time, which may cause
corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour 1 litre of water inside the container (this
is necessary only before filling with salt for
the first time).
SALET
SAL
SALZ
SEL
3. Using the funnel provided, pour in the salt until
the container is full.
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
SR06
The salt container will require topping up
periodically.
You are reminded of this by the salt indicator light on
the control panel which comes on when the salt has
finished.
The salt indicator light on the control
panel can remain illuminated for 2-6 hours
after the salt has been replenished,
assuming the dishwasher remains
switched on. If you are using salts that
take longer to dissolve then this can take
longer. The function of the machine is not
affected.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is automatically added during the last
rinse, ensuring thorough rinsing, and spot and
streak free drying. The dispenser, which is
positioned inside the door, holds about 110 ml of
rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
A
anticlockwise.
BR01
2. Add the rinse aid until the container is completely
full. The indicator (B) will be completely dark.
3. Top up the rinse aid when the rinse aid indicator
light on the control panel illuminates.
B
Ensure that the lid is closed after every refill.
5
4
6
1
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess
foaming during the next wash.
BR03
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6
position selector (C) (position 1 minimum dosage,
position 6 maximum dosage).
C
Start from position 3.
m
1
Gradually increase the dose if there are drops of
water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the
dishes.
BR02
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
Only use detergents specifically designed
for use in dishwashers.
We recommend the use of Finish detergents which
are available in the following options:
Finish Double Action Tablets. Each tablet has the
exact amount of detergent required, simply place in
the dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the
gel is extra gentle it is recommended for fine bone
china.
Min = 15 g
Max = 30 g
If using powder detergents proceed as follows:
D
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the instructions
given in the “Washing programmes” chart.
As all detergents are not the same, you should
also consult the instructions on the packet.
M A X
M I N
3. Always close the lid.
DE17
4. If the programme has a prewash add the
required detergent in the SID detergent
dispenser, located in the centre of the upper
basket.
If using detergent in tablets proceed as follows:
1. For all programmes; place 1 tablet inside the
detergent dispenser.
2. Always close the lid.
DE14
3. For all programmes with prewash; place a portion
of a further tablet on the lid of the detergent
dispenser.
Insufficient quantities of detergent will
produce poor washing results, whereas an
excessive amount of detergent will not
improve washing results and is also
wasteful.
Using no more than the correct amount
also contributes to reducing pollution.
Compact detergents with enzymes
In these compact powders the environmentally unfriendly components have been replaced by natural enzymes
and other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a temperature as low as 50°C.
By choosing the "BIO" programmes you can therefore achieve the same cleaning results that would otherwise
be achievable only with 65°C programmes and conventional detergents.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.
Do not load very small items which can fall
through the baskets.
UI48
Open the door and slide out the baskets to load the
dishes.
The lower basket
The lower basket is designed to take saucepans,
lids, plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the
upper spray arm can turn freely.
UI21
The two rear rows of prongs on the lower basket can
be easily lowered to allow you to load pots, pans
and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down
(see picture).
- To bring them back to the standing position, just
pull them up again.
UI18
UI85
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
These items should only be places in the
removable knife basket.
Take care when loading or unloading
sharp items such as knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving
knives must be placed horizontally in the
removable knife basket provided, to be positioned
at the rear of the upper basket.
UI53
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery
with the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
The cutlery basket is in two parts which can be
separated to give greater loading flexibility. To
separate the two parts, slide them horizontally in
opposite directions and pull them apart. To
reassemble, reverse the procedure.
UI62
For best results we recommend you to use the
cutlery grids provided (if the size and dimensions of
the cutlery allow it).
UI63
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 25 cm in
diameter), salad bowls, cups and glasses.
Arrange items so that water can reach all surfaces.
Glasses with long stems can be placed upside down
in the cup racks.
Light items (plastic bowls etc.) should be loaded in
the upper basket and arranged so they do not move.
US47
In case that plates are loaded in the
upper basket:
load them starting from the rear positions of the
basket, tilting them forwards and avoiding the front
positions near the door.
US71
Before closing the door, ensure that the
spray arms can rotate freely.
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to
32 cm in diameter) you can load them in the lower
basket after moving the upper basket to the higher
position.
Attention!
Never lift or lower the basket on one side only.
To move to the higher position proceed as
follows:
RC04
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the
mechanism is engaged and the basket is stable.
When the top basket is in the higher
position it will only take plates up to 20 cm
in diameter and you will not be able to use
the raised cup racks.
To lower the basket to the original position
proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and the allow the
mechanism to drop back slowly, keeping hold of it.
After loading your machine always close
the door, as an open door can be a hazard.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
To save energy
Items not suitable for dishwashers
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
The following items should not be washed in the
dishwasher (unless they are sold as dishwasher
proof):
If necessary run the Rinse and Hold programme
(see "Washing Programmes" chart) so that any food
scraps do not become caked on the dishes while
you are waiting to run the complete wash
programme.
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
Do not prewash dishes under running water.
- crystal ware
Select an economic programme when dishes are
not very soiled, following the instructions given in the
"Washing programmes" chart.
- leaded glass
- plastic items
Select the half load option if only a few dishes need
washing. Remember to load all the dishes in the
selected basket.
- antique or fine decorated china
Certain types of decoration can discolour when
washed in a dishwasher.
Select a drying option.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
For best washing results
Before loading, remove all scraps of food and soak
very heavily soiled pots and pans.
Achemical reaction can occur between silver cutlery
and stainless steel cutlery. As a precaution, do not
wash together.
Arrange saucepans, cups and glasses etc. upside-
down.
Iron and cast iron objects can rust and stain other
items.
Tilt items with convex or concave surfaces so that
the water drains off easily.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
Avoid contact between the dishes as far as possible.
If in doubt check with manufacturer of the
item.
When buying new dishes, ensure that they
are dishwasher proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
W
N E
E
ION
T
C
L
A
OUB
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Degree of soil
Type of load
Required
Recommended
Cycle
quantity of detergent
push buttons
description
wash
prewash
Any.
1 cold rinse
(to avoid food scraps
from sticking together).
PROGRAMMES
SELECTION
1
ON
OFF
Partial load (to be completed
later in the day).
/
/
RINSE AND HOLD
Hot prewash
Main wash up to 70°C
3 cold rinses
1 hot rinse
Heavy soil.
Crockery, cutlery,
pots and pans
PROGRAMMES
SELECTION
2
ON
OFF
25 g
10 g
INTENSIVE 70°C
Turbo dry
Warm prewash
Main wash up to 65°C
2 warm rinses
1 hot rinse
3
Heavy soil.
Crockery, cutlery,
pots and pans
PROGRAMMES
SELECTION
NORMAL PLUS 65°C
WITH PREWASH
ON
OFF
25 g
25 g
10 g
5 g
Turbo dry
Cold prewash
Main wash up to 65°C
2 cold rinses
1 hot rinse
4
PROGRAMMES
SELECTION
Normal soil.
Crockery and cutlery
ON
OFF
NORMAL 65°C
WITH PREWASH
Turbo dry
Cold prewash
Main wash up to 50°C
2 cold rinses
1 hot rinse
5
PROGRAMMES
SELECTION
ON
OFF
Light soil.
Crockery and cutlery
ECONOMY 50°C
WITH PREWASH
25 g
25 g
5 g
Turbo dry
Cold prewash
Main wash up to 50°C
2 cold rinses
1 hot rinse
6
*
PROGRAMMES
SELECTION
Normal soil.
Crockery and cutlery
BIO 50°C
ON
OFF
5 g
WITH PREWASH
Turbo dry
Main wash up to 50°C
1 cold rinse
1 hot rinse
7
PROGRAMMES
SELECTION
ON
OFF
Light soil.
Crockery and cutlery
BIO 50°C
NO PREWASH
30 g
30 g
/
/
Turbo dry
Main wash up to 55°C
1 cold rinse
1 hot rinse
PROGRAMMES
SELECTION
8
Light soil.
Crockery and cutlery
ON
OFF
**
QUICK WASH 55°C
Cold prewash
Main wash up to 45°C
2 cold rinses
1 hot rinse
9
PROGRAMMES
SELECTION
Normal soil.
Delicate china and glassware
ON
OFF
DELICATE 45°C
WITH PREWASH
25 g
5 g
Turbo dry
This is a programme
designed both to heat plates
before serving or remove
dust from dishes which have
not been used for a long
time.
10
PROGRAMMES
SELECTION
ON
OFF
1 hot rinse
PLATE WARMER
/
/
Testing programme for EN 50242 (see "Hints for Test Centres).
*
This is a special programme for quick washing a full load of lightly soiled crockery (except pots) so that you may re-use
them promptly.
**
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
Press the "PROGRAMMES SELECTION" push
button until the required programme number
appears in the digital display (see "Washing
programmes" chart).
1. Check the filters
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
To see the duration of the programme (in
minutes), only with open door, press the
"CANCEL" push button
2. Press the ON-OFF push
button
The following options may also be selected:
The display will show the last selected
programme (if programme options have been
selected the corresponding lights will
illuminate).
G HALF LOAD: by pressing the corresponding
push button
G ECO DRY or NO DRY by pressing the
corresponding push button.
Close the door, the programme will start
automatically and an audible signal advises
you of this.
3. Check that there is rinse aid
and salt
All the indicator lights will turn off.
The corresponding indicator lights will
illuminate if refilling is necessary.
The display will show the running time of the
programme.
4. Load the dishes
7b. Setting and starting the
programme with "DELAY
START"
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the
plates, saucers, glasses and cups etc. in it.
Once a programme and required options have
been selected (see point 7a.) to use DELAY
proceed as follows:
Slide the baskets back into the machine.
Press the DELAY push button.
The digital display will show "h 0".
If other options have been selected the
corresponding indicator lights will turn off, but
this will not modify the settings made previously.
Press the button again to select the number of
hours by which you wish to delay the programme
start (up to a maximum of 12 hours).
5. Ensure that the spray arms
can rotate freely.
6. Measure out detergent
To set the time setting to zero press the DELAY
push button until "h 0" appears in the digital
display.
Add the required amount of detergent into the
dispenser.
Close the door, an audible signal will confirm
the starting of the countdown.
Important!
If the half load option is selected
remember to reduce the quantity of
detergent.
The digital display shows the delay time, which
will decrease in steps of 1 hour.
The progression of the countdown will be
confirmed by a flashing dot in the digital display.
Close the detergent dispenser lid.
Once the delayed time has elapsed the
programme will start automatically and in the
digital display will appear the duration of the
programme.
7a. Setting and starting the
programme without "DELAY
START"
The opening of the door will not stop the
countdown.
The selection of the programme occurs with
the door partially opened.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
8. To cancel a programme in
progress
Important!
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately after
a programme has finished, as steam may
escape.
Open the door and press the "CANCEL" push
button.
Aaudible signal informs you that the
programme under way has been cancelled, 3
horizontal lines (---) will appear in the digital
display (for about 2 seconds), then the number
of the last selected programme will appear.
The dishwasher has now returned to setting
mode and it is now possible to select a new
washing programme.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
To stop a countdown in progress, open the
door and press the "CANCEL" push button, in
the digital display appears the number
corresponding to the selected programme.
The countdown has been cancelled but the
setting of the programme with eventual options
remains memorised.
9. At the end of the washing
programme
The dishwasher will automatically stop and
an intermittent audible signal will sound
when the programme has ended (with the
delay start the audible signal is automatically
excluded).
All indicator lights turn off and 3 flashing
horizontal lines will appear in the digital
display.
Wait a 15/20 minutes before opening the
dishwasher’s door; in this way you will avoid to
burn yourself removing the dishes and avoid
also the damage of the nearby furniture caused
by the escape of steam.
Open the door and switch off the dishwasher
by pressing the ON-OFF push button.
Empty the lower basket first and then the upper
one; this will avoid water dripping from the
upper basket onto the dishes in the lower one.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with
a damp cloth.
We recommend the use of Finish Dishwasher
Cleaner every 3 months or run a 65°C wash without
dishes using detergent. Regular use of Finish
Dishwasher Cleaner cleans inaccessible parts,
eliminates unpleasant food odours and helps
prevent the build-up of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To remove the drain filter
- simply pull it out by the handle.
A
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
MA04
MA19
Cleaning the large filter
(Every week)
If necessary clean the large filter (B) on both sides
under running water, using a brush.
90°
To remove the large filter
B
1. Remove the spray arm by pulling it upwards on
C
one side.
MA20
MA05
2. Turn the column (C) anticlockwise by 90° and
then slide out the filter.
3. Once cleaned refit it following the above
instructions in reverse order.
4. Ensure the filter is in its original position, the
handle of the drain filter should be pointing
towards the front of the appliance.
MA21
MA18
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure
correct operation of the machine.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Check that the SID is not clogged with detergent
residue. If necessary rinse it under running water
after having removed it from the basket by twisting it
anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it
clockwise.
Never use your dishwasher without the
SID dispenser.
Since SID also ensures correct distribution
of the water to the upper spray arm,
running the dishwasher without it will
impair the washing results.
MA12
External cleaning
Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary
use only neutral detergents. Never use abrasive
products, scouring pads or solvent (acetone,
trichloroethylene etc....).
Prolonged periods of non-
operation
If you are not using the machine for any period
of time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable,
empty the machine, close the appliance door,
disconnect the water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of
any problems.
The dishwasher will not start or stops during operation, an audible signal will inform you of the alarm
intervention. All push buttons are inoperative except for the ON-OFF push button. All indicator lights are off and
in the digital display one of the following flashing fault codes will appear AL1, AL2, AL3, AL4, AL5, AL6, AL7,
AL8.
Press the ON-OFF push button to switch off the dishwasher and carry out the following suggested corrective
actions listed below.
Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault
code reappears in the digital display, contact your local Service Force Centre.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or
installation a charge will be made, even if the appliance is in guarantee.
Symptom
Fault code
Solution
The machine will not start
G The door has not been properly closed.
G The plug is not properly inserted in the power socket.
G There is a power failure.
The machine does not fill
with water
Alarm AL5
G Ensure the water tap is open.
G Ensure the mains water supply has not been cut off.
G The inlet hose may be squashed or bent. Reposition the hose.
G The inlet hose may be blocked. Switch off the water supply and
clean the filter.
The dishwasher will not drain
Alarm AL6
Alarm AL4
G The drain hose may be squashed or bent. Reposition the hose.
G The sink may be blocked. Clear any blockages.
G The drain hose extension is not correct. Follow the instructions for
connecting to the waste.
G There is no vent in the end of the drain hose.
Protection against flooding
is active
G Close the water tap and contact the Service Force Centre.
General
Alarms AL1, AL2,
AL3, AL7, AL8
G Switch off the dishwasher. Switch it back on and start the programme.
If the alarm reappears, call the local Service Force Centre.
The machine is noisy
G Dishes are rattling against each other, refer to “Loading your machine”.
G The spray arms are knocking against the dishes. Refer to "Loading
your machine".
The door is difficult to close
G The dishwasher is not level, or not properly built-in.
Visible lime deposits or
white film on the dishes
G Check that there is salt and that the salt cap is tight.
G Check that the right level of the water softener is set.
The dishes are not quite dry
G The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
G The baskets are too full.
G The dishes have not been arranged properly.
G The spray arms do not rotate
G The spray arms are clogged.
G The filters are clogged.
G The filters are not in the correct position.
G Not enough detergent has been used or it is unsuitable.
G The detergent is old or has gone hard.
G The salt container cap is not properly closed.
G The washing programme selected is too gentle.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists,
contact your local Service Force Centre, quoting the
model and serial number.
This information can be found on the rating plate
located on the right hand side of the dishwasher
door (see picture).
Prod.No. ........ Ser. No. .........
Protection against flooding
Mod. ........
RA01
The machine is fitted with a device in the bottom of
the machine to protect against flooding.
The device will operate if there are any water leaks
in the machine, however it will only operate if the
machine is on.
In case of malfunction, a fault code will appear in the
digital display will show "AL4".
To repair the dishwasher, turn off the water tap and
call the Service Force Centre.
Technical specifications
DIMENSIONS
Width
Height with worktop
Max depth
59.6 cm
81.8 - 87.8 cm
55.5 cm
Max depth with open door
111.4 cm
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
220/240 V - 50 Hz
200 W
2100 W
2300 W
WATER SUPPLY PRESSURE
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
CAPACITY
12 place settings
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse
aid dispenser.
Test standard
EN 50242
Reference programme:
Load:
Programme 6 - BIO 50°C WITH PREWASH
12 standard place settings
position 5
Rinse aid selector:
Detergent dosage :
30 g in the dispenser
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Arrangement knife basket
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Remove all packaging before positioning the
machine.
Any electrical work required to install
this appliance should be carried out by a
qualified electrician or competent
person.
If possible, position the machine next to a water tap
and a drain.
Any plumbing work required to install
this appliance should be carried out by a
qualified plumber or competent person.
Water supply connections
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in
the technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.
Do not use, for the connection, old hoses which
have been used in another appliance.
The locknut must be correctly fitted to avoid
water leaks.
Avoid bends or kinks in the hose which could
prevent or slow down the water supply.
Attention!
Our appliances are supplied with a
security device to protect against the
return of dirty water back into the
machine.
If the spigot of your sink has a "no return
valve" incorporated this can prevent the
correct draining of your dishwasher.
We advise you therefore to remove it.
If the machine is connected to new pipes or pipes
which have not been used for a long time, you
should run the water for a few minutes before
connecting the inlet hose. This will prevent deposits
of sand or rust clogging the inlet hose filter.
Water outlet hose connection
The end of the drain hose can be connected in the
following ways:
1
2
1. To the sink outlet siphon, securing it if necessary
with a clip.
2. To a stand pipe provided with vent-hole, minimum
internal diameter 4 cm.
The waste connection must be at a height of
between 30 cm (minimum) and 100 cm (maximum)
from the bottom of the dishwasher.
CS13
The drain hose can face either to the right or left of
the dishwasher
Ensure the hose is not bent or squashed as this
could prevent or slow down the discharge of water.
The sink plug must not be in place when the
machine is draining as this could cause the
water to siphon back into the machine.
+ 2 m max
CS14
22
Download from Www.Somanuals.com. All Manuals Search And Download.
If you use a drain hose extension it must be no
longer than 2 metres and its internal diameter must
be no smaller than the diameter of the hose
provided.
Likewise the internal diameter of the couplings used
for connections to the waste outlet must be no
smaller than the diameter of the hose provided.
Electrical connection
This appliance must be earthed.
The manufacturer declines any
responsibility should this safety measure
not be observed.
If the plug that is fitted to your appliance is not
suitable for the socket, it must be cut off and the
appropriate plug fitted.
Important
The wires on the mains lead are coloured in
accordance with the following code:
Green
Blue
Brown
and
Yellow-Earth
-Neutral
-Live
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not
correspond with the markings identifying the
terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
CE03
terminal in the plug which is marked with the
letter "E" or the earth symbol
green and yellow.
or coloured
2. Connect the Blue (neutral) wire to the terminal in
the plug which is marked with the letter "N" or
coloured black.
3. Connect the Brown (live) wire to the terminal in
the plug which is marked with the letter "L" or
coloured red.
The plug moulded onto the lead incorporates a
13amp BSI362 fuse. Only ASTA or BSI fuses should
be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the product.
Areplacement cover/carrier must be obtained from
your local Service Force Centre.
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and spare parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi
Service Centre by telephoning:
08705 929 929
Your telephone call will be automatically routed to the Service Force centre covering your post code area. The
addresses are listed on the following pages. Before calling out an engineer, please ensure you have read the details
under the heading "Something Not Working".
When you contact the Service Force Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number (found on the rating plate)
5. The purchase date
Customer Care Department
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727727 (*)
calls to this number may be recorded for training purposes
*
Download from Www.Somanuals.com. All Manuals Search And Download.
To contact your local Service Force Centre telephone 08705 929 929
ISLE OF LEWIS
ND Macleod
16 James Street
Stornoway
CHANNEL ISLANDS
NORTH EAST
GUERNSEY
JERSEY
Guernsey Electricity
PO Box 4
Isle of Lewis PA87 2QW
GATESHEAD
GRIMSBY
HULL
Unit 356a
Dukesway Court
Dukesway
Gateshead NE11 0BH
Vale, Guernsey
Channel Islands GY1 3AD
KELSO
2, 6 & 8 Woodmarket
Kelso
Borders
Jersey Electricity Company
Haut De L’orme
Rue De Haut De L’orme
Trinity
TD5 7AX
15 Hainton Avenue
Grimsby
N. E. Lincs
DN32 9AS
Jersey
ORKNEY
PERTH
7 King Street
Kirkwall
Orkney
Channel Islands JE3 5FG
Unit 1
KW15 1JF
Boulevard Industrial Estate
Hull
SCOTLAND
Scottish Hydro Electric
HU3 4AY
Central Warehouse
Inveralmond
Perth PH1 3AF
ABERDEEN
54 Claremont Street
Aberdeen AB10 6RA
LEEDS
64-66 Cross Gates Road
Cross Gates
Leeds
(OWN SALES)
SHETLAND
AUCHTERMUCHTY 33a Burnside
Auchtermuchty
3-4 Carlton Place
Lerwick
Shetland
ZE1 0PW
LS15 7YS
Fife KY14 7AJ
NEWTON AYCLIFFE Unit 23
Northfield Way
(OWN SALES)
SHETLAND
BLANTYRE
Unit 5
Block 2
Auchenraith Ind. Estate
Rosendale Way
Blantyre G72 0NJ
Aycliffe Industrial Park
Newton Aycliffe
DL5 6EJ
Bolts Shetland
26 North Road
Lerwick
(OWN SALES)
WHALSAY
Shetland ZE1 0PE
SHEFFIELD
Pennine House
Roman Ridge Road
Sheffield
DUMFRIES
DUNOON
93 Irish Street
Dumfries
DG1 2 PQ
Leask Electrical
Harisdale
Symbister, Whalsay
Shetland ZE2 9AA
S9 1GB
(OWN SALES)
7 Hill Street
Dunoon
Argyll
NORTH WEST
PA23 7AL
BIRKENHEAD
CARLISLE
1 Kelvin Park
NORTHERN IRELAND
Dock Road
Birkenhead
CH41 1LT
EDINBURGH
Unit 12
BELFAST
Owenmore House
Kilwee Business Park
Dunmurry
Dumbryden Ind. Estate
2 Dumbryden Road
Edinburgh
Unit 7
Belfast
EH14 2AB
James Street Workshops
James Street
BT17 0HD
Carlisle
Cumbria
GLASGOW
Unit 4
Wellington Road
Bishopriggs
CA2 5AH
WALES
ISLE OF MAN
BOLTON
South Quay Ind. Estate
CARDIFF
CLYWD
DYFED
Unit 4
Glasgow G64 2SA
Douglas
Isle of Man
IM1 5AT
Guardian Industrial Estate
Clydesmuir Road
Cardiff
INVERNESS
Unit 3BI
Smithton Ind. Estate
Smithton
CF2 2QS
Unit B
Inverness IV2 7WL
Central Industrial Estate
St Marks Street
Bolton
Unit 6-7 Coed Parc
Abergele Road
Rhuddlan
Clwyd
ISLE OF ARRAN
ISLE OF BARRA
ISLES OF BUTE
R Haggerty
Bruach
Blackwaterfoot
Isle of Arran
BL3 6NR
LL18 5UG
PRESTON
Unit 250
Dawson Place
Bamber Bridge
Preston
Unit 9
J Zerfah
244 Bruernish
Isle of Barra
Western Islands HS9 5QY
St. Clears Business Park
Tenby Road
St. Clears
Carmarthen
SA33 4JW
Lancashire PR5 8AL
STOCKPORT
Unit 20 Haigh Park
Haigh Avenue
Stockport
Walker Engineering
Glenmhor
Upper Serpentine Road
Rothesay
Isle of Bute PA20 9EH
SK4 1QR
OSWESTRY
Plas Ffynnon Warehouse
Middleton Road
Oswestry
SY11 2PP
Download from Www.Somanuals.com. All Manuals Search And Download.
To contact your local Service Force Centre telephone 08705 929 929
MIDLANDS
LONDON & EAST ANGLIA
SOUTH EAST
BIRMINGHAM
66 Birch Road East
BECKENHAM
11a Gardner Ind. Estate
Wyrley Trading Estate
Witton
Birmingham
B6 7DB
Kent House Lane
Beckenham
Kent BR3 1QZ
ASHFORD
FLEET
Unit 2
Bridge Road Business Centre
Bridge Road
Ashford
CHELMSFORD
COLINDALE
Hanbury Road
Widford Ind. Estate
Chelmsford
Essex
Kent TN23 1BB
BOURNE
Pinfold Road
Bourne
PE10 9HT
Unit 1
Redfields Ind. Estate
Church Crookham
Fleet
CM12 3AE
BRIDGNORTH
68 St. Mary’s Street
Bridgnorth
Shropshire
Unit 14
Capitol Park
Capitol Way
Colindale
London NW9 0EQ
Hampshire GU13 0RD
WV16 4DR
HAYWARDS
HEATH
21-25 Bridge Road
Haywards Heath
Sussex RH16 1UA
GLOUCESTER
HEREFORD
101 Rycroft Street
Gloucester
GL1 4NB
ELTHAM
194 Court Road
Mottingham
Units 3 & 4
Eltham
TONBRIDGE
Unit 30
Bank Buildings
Cattle market
Hereford
London SE9 4EW
Deacon Trading Estate
Morley Road
Tonbridge
ENFIELD
284 Alma Road
Enfield
HE4 9HX
TN9 1RA
London
EN3 7BB
HIGHAM FERRERS 30 High Street
Higham Ferrers
Northants
NN10 8PL
GRAVESEND
Unit B4
Imperial Business Estate
West Mill
Gravesend
Kent
SOUTH WEST
BARNSTAPLE
Main Road
Fremington
Barnstaple
North Devon EX31 2NT
ILKESTON
Unit 2
Furnace Road
Ilkeston DE7 5EP
DA11 0DL
LEICESTER
Unit 7
IPSWICH
Unit 6C
Oaks Industrial Estate
Coventry Road
Narborough
Leicestershire
LE9 5GF
Elton Park Business Centre
Hadleigh Road
Ipswich
BOURNEMOUTH 63-65 Curzon Road
Bournemouth
Dorset
BH1 4PW
IP2 0DD
LETCHWORTH
LONDON
16-17 Woodside Ind. Park
BRIDGEWATER
BRISTOL
6 Herswell Business Park
Salmon Parade
Bridgwater
LINCOLN
Unit 8
Works Road
Letchworth
Herts
Clifton Street
Stone Field Park
Lincoln
Somerset TA6 5PY
SG6 1LA
LN5 8LQ
11 Eldon Way
2 - 4 Royal Lane
Yiewsley
West Drayton
Middlesex
Eldonwall Trading Estate
Bristol
BS4 3QQ
NEWCASTLE
UNDER LYME
18-21 Croft Road
Brampton Ind. Estate
Newcastle under Lyme
Staffordshire
ST5 0TW
UB7 8DL
EMSWORTH
ISLE OF WIGHT
266 Main Road
Southbourne
Emsworth
MAIDENHEAD
MOLESEY
Reform Road
Maidenhead
Berkshire
SL6 8BY
PO10 8JL
REDDITCH
TAMWORTH
13 Thornhill Road
North Moons Moat
Redditch
Worcestershire
B98 9ND
Unit 8
Enterprise Court
Ryde Business Park
Ryde
10 Island Farm Avenue
West Molesey
Surrey
Isle of Wight PO33 1DB
Unit 3
KT8 2UZ
Sterling Park
Claymore
Tamworth
B77 5DQ
NEWTON ABBOT Unit 2
Zealley Ind. Estate
NEWBURY
9 Pipers Court
Berkshire Drive
Thatcham
Berkshire
RG19 4ER
Kingsteignton
Newton Abbot
TQ12 3TD
WORCESTER
Units 1 & 2
Northbrooks Close
Gregorys Mill Ind. Estate
Worcester
REDRUTH
Unit 7D
Pool Ind. Estate
Druids Road
Redruth
Cornwall TR15 3RH
NORWICH
SUNBURY
2b Trafalgar Street
Norwich
NR1 3HN
WR3 8BP
Unit 1a
The Summit
Hanworth Road
Sunbury on Thames
TW16 5DB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee conditions
Standard guarantee conditions
We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to
be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF
CHARGE for labour, materials or carriage on condition that:
● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
● The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
● The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us.
● All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
● Any appliance or defective part replaced shall become the Company’s property.
● This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which
case a premium will be charged.
Exclusions
This guarantee does not cover:
● Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts
of glass or plastic.
● Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United
Kingdom.
● Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
● Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the
following qualifications:
● The guarantee starts from the date you first purchased your product.
● The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this
brand or range of products.
● This guarantee relates to you and cannot be transferred to another user.
● Your new home is within the European Community (EC) or European free Trade Area.
● The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
● The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They
will then ensure that the local service Organisation is aware of your move and able to look after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)3 44 62 28 28
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)20 78 77 50
+44 (0)1753 219897
+353 (0) 14090753
Nurnberg
Pordenone
Stockholm
Slough
Sweden
UK
Ireland
Dublin
152979 72/0
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
©
Electrolux Household Appliances Limited 2001
2 08/01
Download from Www.Somanuals.com. All Manuals Search And Download.
|