Zanussi Dishwasher ZSF 6120 User Manual

DISHWASHER  
ZSF 6120  
Instruction Book  
152963 07/0  
UK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety instructions  
It is most important that this instruction book should be retained with the appliance for future reference. Should the  
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that  
the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the  
relevant safety information.  
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the  
appliance.  
Installation  
Disposal  
G Check your dishwasher for any transport damage. Never  
Dispose of the dishwasher packaging material correctly.  
connect a damaged machine. If your dishwasher is  
All packaging materials can be recycled.  
damaged, you should contact your supplier.  
Plastic parts are marked with standard international  
abbreviations:  
G For safety reasons it is dangerous to alter the specifications  
or attempt to modify this product in any way.  
>PE<  
>PS<  
for polyethylene, e.g. sheet wrapping material.  
for polystyrene, e.g. padding material (always CFC-  
free).  
G Any electrical and plumbing work required to install this  
appliance should be carried out by a qualified and  
competent person.  
>POM< for polyoxymethylene, e.g. plastic clips.  
G Care must be taken to ensure that the appliance does not  
Cardboard packaging is manufactured from recycled paper  
and should be deposited in the waste paper collection for  
recycling.  
As and when you cease to use your dishwasher and withdraw  
it from service, your should render it unserviceable before  
having it disposed of.  
stand on the electrical supply cable.  
G The sides of the dishwasher must never be drilled to  
prevent damage to hydraulic components.  
Child safety  
G This appliance is designed to be operated by adults.  
Warning! Children at play could lock themselves in your  
dishwasher or otherwise endanger their lives. Therefore cut off  
the power supply cable and make the door closing device  
unusable to prevent children from being trapped inside.  
G Children should not be allowed to tamper with the controls  
or play with the product.  
For the disposing of the appliance please take it to a recycling  
centre or to your dealer who may, for a small contribution to  
the costs, dispose it for you.  
G Packaging parts may be dangerous for children, who could  
even be suffocated! You should therefore keep all  
packaging well away from children.  
G The water in your dishwasher is not for drinking. Detergent  
residues may still be present in your machine. Keep  
children well away from your dishwasher when the door is  
open.  
Economical and  
G Keep all detergents in a safe place out of children's reach.  
ecological dishwashing  
G Ensure that the water softener is correctly adjusted.  
Your dishwasher in day-to-day use  
G Items that are contaminated by petrol, paint, steel or iron  
debris, corrosive, acidic or alkaline chemicals must not be  
washed in this dishwasher.  
G Do not pre-wash under running water.  
G Select the wash programme to suit the nature and degree of  
the soiling on the dishes.  
G Do not use more detergent, dishwasher salt and rinse aid  
than is recommended in these operating instructions and by  
the manufacturer of the respective product.  
G Under no circumstances should you open the door whilst  
the appliance is in operation, especially during the washing  
phase, hot water may escape. However, if the door is  
opened, a safety device ensures that the machine stops.  
G Only use products (detergent, salt and rinse aid) specifically  
designed for use in dishwashers.  
G Long bladed knives stored in an upright position are a  
potential hazard.  
G Long and/or sharp items of cutlery such as carving knives  
must be positioned horizontally in the upper basket.  
G When finishing loading or unloading close the door, as an  
open door can be a hazard.  
G Do not sit or stand on the open door.  
G Isolate the appliance from the power supply and turn off the  
water supply after use.  
G This product should be serviced by an authorised service  
engineer, and only genuine spare parts should be used.  
G Under no circumstances should you attempt to repair the  
machine yourself. Repairs carried out by inexperienced  
persons may cause injury or serious malfunctioning.  
Contact your local Service Force Centre. Always insist on  
genuine spare parts.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
1. Upper basket stop  
2. Water hardness switch  
3. Salt container  
4. Detergent dispenser  
5. Control panel  
6. Rating plate  
7. Rinse aid dispenser  
8. Filters  
9. Lower spray arm  
10. Upper spray arm  
11. Upper basket  
12. Worktop  
IN144  
The control panel  
Function push buttons: in addition to the dishwashing  
programme selected, the following functions can also be set  
with the help of these buttons:  
Phase indicator lights: have the following meanings:  
Wash: illuminates when the washing and rinsing  
phases are running.  
- the setting of the water softener,  
- deactivation/activation of the dosage of rinse aid,  
- the cancelling of a programme in progress.  
Drying: illuminates when the drying phase is  
running.  
End of cycle: illuminates when the washing  
programme has ended.  
Programme selection push buttons: the selection of  
a washing programme occurs by pressing one of these push  
buttons (see "Washing programmes" chart).  
It also has added functions of visual signalling as:  
- the setting of the water softener,  
- deactivation/activation of the dosage of rinse aid,  
- intervention of an alarm due to the malfunction of  
the machine.  
Indicator lights: have the following meanings:  
As soon as you select a washing programme, the phase  
indicator lights for that programme will start flashing.  
Salt refilling indicator light: illuminates when the salt  
has run out.  
As the programme starts, the phase indicator lights turn off  
except for the indicator light of the phase in progress which will  
remain lit with a static light.  
Rinse aid refilling indicator light: illuminates when  
the rinse aid has run out.  
The salt and rinse aid indicator lights are never illuminated  
while a washing programme is running even if filling with salt  
and rinse aid is necessary.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Prior to using for the first time  
Before using your dishwasher for the first time:  
b) Setting electronically  
(The dishwasher must be switched off)  
1. Ensure that the electrical and water connections comply  
The dishwasher is factory set at level 5.  
with the installation instructions  
2. Remove all packaging from inside the appliance  
3. Set the water softener  
1. Press the On/Off push button. The On/Off indicator light  
illuminates (setting mode).  
4. Pour 1 litre of water inside the salt container and then fill  
If a programme push button indicator light is on, this means  
that a washing programme has been set. The programme  
must be cancelled: press simultaneously the function push  
buttons 2 and 3 for about 2 seconds.  
with dishwasher salt  
5. Fill the rinse aid dispenser  
All the indicator lights will turn off (except for the On/Off  
indicator light and eventually salt and rinse aid indicator  
lights) indicating that the setted programme has been  
cancelled and the machine is now in setting mode.  
The water softener  
The dishwasher is equipped with a water softener designed to  
remove minerals and salts from the water supply, which would  
have a detrimental or adverse effect on the operation of the  
appliance.  
The higher the content of these minerals and salts, the harder  
your water is.  
2. Press simultaneously function push buttons 2 and 3, until  
the indicator lights of the function push buttons 1, 2 and 3  
start flashing.  
Water hardness is measured in equivalent scales, Clarke  
degrees, French degrees and mmol/l (millimol per litre).  
The softener should be adjusted according to the hardness of  
the water in your area. Your local Water Authority can advise  
you on the hardness of the water in your area.  
3. Press the function push button 1, the indicator lights of  
function push buttons 2 and 3 turn off while the indicator  
light of the push button 1 goes on flashing, at the same time  
the indicator light End of cycle starts to flash.  
The current level is indicated by the number of flashes of  
the indicator light End of cycle (see chart).  
Example: 5 flashes = level 5  
The water softener must be set in both ways: manually, using  
the water hardness switch and electronically, using the function  
push buttons on the control panel.  
4. To change the level, press push button 1. Each time the  
push button is pressed the level changes. (For the selection  
of the new level see the chart).  
a) Setting manually  
1. Open the dishwasher door.  
Examples:  
2. Remove the lower basket from the dishwasher.  
if the current level is 5, by pressing push button 1 once,  
level 6 is selected.  
if the current level is 10, by pressing push button 1 once,  
level 1 is selected.  
3. Turn the water hardness switch to position 1 or 2 (see  
table).  
4. Replace the lower basket.  
The dishwasher is factory set  
at position 2.  
5. To memorise the operation, switch off the dishwasher by  
pressing the On/Off push button or wait about 60 seconds  
after which the dishwasher will automatically return to  
setting mode.  
AA07  
Water hardness  
Number of  
flashes of the  
"End of cycle"  
indicator light  
Use  
of salt  
Adjusting the water  
hardness setting  
Clarke  
degrees  
°TH  
(french degrees)  
mmol/l  
Range  
(millimol per litre,  
international unit for the  
hardness of water)  
manually  
electronically  
level 10  
64 - 88  
53 - 63  
46 - 52  
36 - 45  
28 - 35  
23 - 27  
18 - 22  
13 - 17  
5 - 12  
91 - 125  
76 - 90  
65 - 75  
51 - 64  
40 - 50  
33 - 39  
26 - 32  
19 - 25  
7 - 18  
9,0 - 12,5  
7,6- 8,9  
6,5 - 7,5  
5,1 - 6,4  
4,0 - 5,0  
3,3 - 3,9  
2,6 - 3,2  
1,9 - 2,5  
0,7 - 1,8  
< 0,7  
IV  
IV  
IV  
IV  
III  
III  
II  
2
10  
9
8
7
6
5
4
3
2
1
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
no  
2
2
2
2
2
1
1
1
1
level 9  
level 8  
level 7  
level 6  
level 5  
level 4  
level 3  
level 2  
level 1  
I/II  
I
< 5  
< 7  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling with salt  
Only use salt specifically designed for use in  
dishwashers.  
All other types of salt not specifically designed for use in  
a dishwasher, especially table salt, will damage the water  
softener.  
Only fill with salt just before starting one of the complete  
washing programmes.  
This will prevent any grains of salt or salty water, which  
may have been spilt, remaining on the bottom of the  
machine for any period of time, which may cause  
corrosion.  
To fill:  
1. Open the door, remove the lower basket and unscrew the  
cap of the salt container by turning it anticlockwise.  
2. Pour 1 litre of water inside the container (this is necessary  
only before filling with salt for the first time).  
3. Using the funnel provided,  
pour in the salt until the  
container is full.  
SALE  
T
ZOUT  
SAL  
SALZ  
SEL  
4. Replace the cap making  
sure that there is no trace  
of salt on the screw  
thread or on the gasket.  
5. Screw on the cap tightly  
turning it clockwise until it  
stops with a click.  
SR14  
The salt container will require topping up periodically. You are  
reminded of this by the salt indicator light on the control panel  
which comes on when the salt has finished.  
The salt indicator light on the control panel can remain  
illuminated for 2-6 hours after the salt has been  
replenished, assuming the dishwasher remains switched  
on. If you are using salts that take longer to dissolve then  
this can take longer. The function of the machine is not  
affected.  
Do not worry if water over flows from the unit when filling with  
salt, this is quite normal.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
G If you are using dishwasher detergent that already contains  
rinse aid, it is necessary to deactivate the dosage of rinse  
aid, in order to avoid a double dosage.  
Rinse aid  
Rinse aid is automatically added during the last rinse, ensuring  
thorough rinsing, and spot and streak free drying.  
The dispenser, which is positioned inside the door, holds about  
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing  
programmes, depending upon the dosage setting.  
Deactivation/activation of the dosage of  
rinse aid  
(The dishwasher must be switched off)  
Factory setting: dosage of rinse aid activated  
Filling with rinse aid  
1. Open the container by pressing the release button (A).  
When the dosage of rinse aid has been deactivated, the  
rinse aid indicator light on the control panel is  
automatically deactivated.  
2. Add the rinse aid until the container is completely full. The  
maximum level for filling is indicated by "max".  
1. Press the On/Off push button. The On/Off indicator light  
illuminates (setting mode).  
If a programme push button indicator light is on, this means  
that a washing programme has been set. The programme  
must be cancelled: press simultaneously the function push  
buttons 2 and 3 for about 2 seconds.  
All the indicator lights will turn off (except for the On/Off  
indicator light and eventually salt and rinse aid indicator  
lights) indicating that the setted programme has been  
cancelled and the machine is now in setting mode.  
BR14  
BR07  
2. Press simultaneously function push buttons 2 and 3, until  
the indicator lights of the function push buttons 1, 2 and 3  
start flashing.  
Ensure that the lid is closed after every refill.  
Clean up any rinse aid spilt during filling with an  
absorbent cloth to avoid excess foaming during the next  
wash.  
3. Press the function push button 2, the indicator lights of  
function push buttons 1 and 3 turn off while the indicator  
light of the function push button 2 goes on flashing, at the  
same time the indicator light End of cycle illuminates  
indicating that the dosage of rinse aid is active.  
Only use branded rinse aid for dishwashers. Never fill the  
rinse aid dispenser with any other substances (e.g.  
dishwasher cleaning agent, liquid detergent). This would  
damage the appliance.  
4. To deactivate the inflow of rinse aid, press the function push  
button 2 again, the indicator light End of cycle turns off,  
indicating that the dosage of rinse aid has been deactivated.  
Adjusting the dose  
According to the finish and drying results obtained, adjust the  
dose of rinse aid by means of the 6 position selector (position  
1 minimum dosage, position 6 maximum dosage).  
5. To memorise the operation, switch off the dishwasher by  
pressing the On/Off push button or wait about 60 seconds  
after which the dishwasher will automatically return to  
setting mode.  
The dose is factory set in  
position 4.  
To activate the dosage of rinse aid follow the above  
instructions until the indicator light End of cycle illuminates.  
Increase the dose if there are  
drops of water or lime spots  
on the dishes after washing.  
Reduce it if there are sticky  
whitish streaks on the dishes  
or a bluish film on glassware  
or knife blades.  
BR09  
Top up the rinse aid when the indicator light on the control  
panel illuminates.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
In daily use  
G Check if it’s necessary to refill with dishwasher salt or rinse  
Loading cutlery and dishes  
Sponges, household cloths and any object that can  
absorb water may not be washed in the dishwasher.  
aid  
G Load cutlery and dishes into the dishwasher.  
G Fill with dishwasher detergent .  
G Before loading the dishes, you should:  
- Remove large left-overs.  
G Select a wash programme suitable for the cutlery and  
dishes.  
- Soften remnants of burnt food in pans  
G Start the wash programme.  
G When loading the dishes and cutlery, please note:  
- Dishes and cutlery must not impede the rotation of the  
spray arms .  
- Load hollow items such as cups, glasses, pans, etc. with  
the opening downwards so that water cannot collect in the  
container or a deep base.  
- Dishes and items of cutlery must not lie inside one  
another, or cover each other.  
- To avoid damage to glasses, they must not touch.  
- Lay small objects in the cutlery basket.  
G Plastic items and pans with teflon have a tendency to  
retain water drops; these items will not dry as well as  
porcelain and steel items.  
For washing in the dishwasher the following cutlery/dishes  
are not suitable:  
are of limited suitability:  
- Cutlery with wooden, horn, china or  
mother-of-pearl handles  
- Only wash stoneware in the dishwasher if it is specifically  
marked as being dishwasher-safe by the manufacturer.  
- Plastic items that are not heat resistant  
- Glazed patterns may fade if machine washed frequently  
- Older cutlery with glued parts that is not  
temperature resistant  
- Silver and aluminium parts have a tendency to discolour  
during washing. Residues, e.g. egg white, egg yolk and  
mustard often cause discolouring and staining on silver.  
Therefore always clean left-overs from silver immediately, if  
it is not to be washed straight after use.  
- Bonded cutlery items or dishes  
- Pewter or copper items  
- Lead crystal glass  
- Some types of glass can become dull after a large number  
of washes  
- Steel items subject to rusting  
- Wooden platters  
- Items made from synthetic fibres  
Open the door and slide out the baskets to load the dishes.  
The two rows of prongs on the lower basket can be easily  
lowered to allow you to load pots, pans and bowls.  
The lower basket  
The lower basket is designed to take saucepans, lids, plates,  
salad bowls, cutlery etc.  
Serving dishes and large lids should be arranged around the  
edge of the basket, ensuring that the spray arms can turn  
freely.  
UI87  
UI95  
UI94  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
The cutlery basket  
Adjusting the height of the upper basket  
Long bladed knives stored in an upright position are a  
potential hazard.  
If washing very large plates you can load them in the lower  
basket after moving the upper basket to the higher position.  
Long and/or sharp items of cutlery such as carving knives  
must be positioned horizontally in the upper basket.  
Take care when loading or unloading sharp items such as  
knives.  
Maximum height of the dishes in  
upper basket  
lower basket  
With upper basket raised  
With upper basket lowered  
20 cm  
24 cm  
31 cm  
27 cm  
Forks and spoons should be placed in the removable cutlery  
basket with the handles facing downwards and the knives with  
their handles facing upwards.  
If the handles protrude from the bottom of the basket,  
obstructing the lower spray arm, load the cutlery with the  
handles facing upwards.  
To move to the higher position proceed as  
follows:  
Mix spoons with other cutlery to prevent them from sticking  
together.  
1. Move the front runner stops (A) of the upper basket  
outwards and slide the basket out.  
For best results we  
2. Refit the basket in the higher position and replace the stops  
recommend you to use the  
cutlery grids provided (if the  
size and dimensions of the  
cutlery allow it).  
(A) in their original position.  
When the basket is in the  
higher position you will not  
be able to use the cup  
rack(s).  
The cutlery basket is in two  
parts which can be  
separated to give greater  
loading flexibility. To separate  
UI63  
the two parts, slide them  
horizontally in opposite  
directions and pull them  
apart. To reassemble,  
reverse the procedure.  
RC01  
After loading your machine always close the door, as an  
open door can be a hazard.  
UI62  
The upper basket  
The upper basket is designed for plates (dessert plates,  
saucers, dinner plates of up to 24 cm in diameter), salad  
bowls, cups and glasses.  
Arrange items on and  
underneath the cup racks so  
that water can reach all  
surfaces.  
Glasses with long stems can  
be placed upside down in the  
cup racks.  
Light items (plastic bowls  
etc.) must be loaded in the  
upper basket and arranged  
US47  
so they do not move.  
In case that plates are loaded in the upper  
basket:  
load them starting from the  
rear positions of the  
basket; tilting them slightly  
forwards and avoiding the  
front positions near the  
door.  
US71  
Before closing the door, ensure that the spray arms can  
rotate freely.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of detergent  
Only use detergents specifically designed for use in  
dishwashers.  
We recommend the use of Finish detergents.  
Using no more then the correct amount of detergent  
contributes to reducing pollution.  
Please observe the manufacturer’s dosing and storage  
recommendations as stated on the detergent packaging.  
Fill with detergent  
1. If the lid is closed: press release button (1). The lid springs  
open.  
2. Fill the detergent dispenser (2) with detergent.  
The marking indicates the dosing levels:  
20 = approximately 20 g of detergent  
30 = approximately 30 g of detergent  
DE19  
DE22  
3. All programmes with prewash need an additional detergent  
dose (5/10 g) that must be placed in the prewash detergent  
chamber (3). This detergent will take effect during the  
prewash phase.  
4. Close the lid and press until it locks in place.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Different kinds of detergent  
Detergent tablets  
Use of "3 in 1" combi detergents  
Detergent tablets of different brands dissolve at different  
speeds. For this reason some detergent tablets cannot  
dissolve and develop their full cleaning power during short  
programmes. Therefore please use long programmes when  
using detergent tablets, to ensure the complete removal of  
detergent residuals.  
Do not place the tablets in the tub or in the cutlery basket  
as this will result in poorer wash results. The tablets  
should be placed in the detergent dispenser.  
General advice  
These products are detergents with integrated and combined  
detergent/rinse-aid and salt functions.  
1. Before using these products you should first check that the  
water hardness in your supply is compatible with the use of  
these products as per the detergent manufacturers (on the  
product packaging).  
2. These products should be strictly used according to the  
detergent manufacturers instructions.  
3. If you encounter problems when using 3 in 1 products for  
the first time then please contact the detergent  
manufacturers care line (the telephone number is given on  
the product packaging).  
Concentrated detergent  
Based on their chemical composition, dishwasher detergents  
can be split into two basic types:  
- conventional, alkaline detergents with caustic components.  
- low alkaline concentrated detergents with natural enzymes.  
The use of 50°C washing programmes in conjunction with  
concentrated detergents reduces pollution and is good for your  
dishes; these wash programmes are specially matched to the  
dirt-dissolving properties of the enzymes in the concentrated  
detergent. For this reason 50°C wash programmes in which  
concentrated detergents are used can achieve the same  
results that can otherwise only be achieved using 65°C  
programmes.  
Special advice  
When using combination 3 in 1 products select the lowest  
possible setting for water hardness.  
If you decide to turn back to the use of the standard detergent  
system we advise that you:  
G Refill both the salt container and rinse aid dispenser.  
G Switch the water hardness setting to the highest possible  
position and run from 1 to 3 normal washing programmes  
without a load.  
G Readjust the water hardness setting again according to the  
Combi detergents  
hardness of the water in your area.  
If you are using dishwasher detergent that includes the rinse  
aid function, this must be placed in the detergent compartment.  
In this case the rinse aid doage must be deactivated, in order  
to avoid a double dosage.  
For best results we recommend the use of Finish detergents, rinse aid and salt.  
P OURING  
PACK  
W
E
L
N
OUB  
N
O
I
CT  
E
A
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT  
DE15  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes  
Programme  
Degree of soil  
and  
Press the  
programme  
push button  
Cycle description  
(3) Consumption values  
Energy  
consumption  
(in kWh)  
Water  
consumption  
(in litres)  
Programme  
duration  
(in minutes)  
type of load  
Hot prewash  
Main wash up to 70°C  
2 warm rinses  
1 hot rinse  
Heavy soil.  
Crockery, cutlery, pots  
and pans  
Intensive  
70°  
Intensive 70°C  
Normal 65°C  
80 - 90  
1,7 - 1,9  
23 - 25  
Drying  
Cold prewash  
Main wash up to 65°C  
1 cold rinse  
1 hot rinse  
Drying  
Normal soil.  
Crockery and cutlery  
Normal  
65°  
95 - 105  
1,3 - 1,5  
0,8  
19 - 21  
Quick  
Wash  
60°  
Main wash up to 60°C  
1 hot rinse  
Fresh soil.  
Crockery and cutlery  
(1) Quick Wash  
30  
9
60°C  
Cold prewash  
Main wash up to 50°C  
1 cold rinse  
Normal soil.  
Crockery and cutlery  
Economy  
50°  
(2) Economy 50°C  
155 - 165  
0,95 - 1,05  
13 - 15  
1 hot rinse  
Drying  
1 cold rinse (to avoid food  
scraps from sticking  
together).  
This programme does not  
require the use of  
detergent.  
Any.  
Rinse  
Hold  
Partial load (to be  
completed later in the  
day).  
12  
0,1  
4
Rinse and Hold  
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).  
This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast  
and dinner crockery and cutlery.  
(2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with  
enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be  
obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of  
washing and drying have been extended.  
(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by  
the variations of the power supply.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting a washing programme  
1. Check that the baskets have been  
loaded correctly and that the spray  
arms can rotate freely  
7. End of the washing programme  
The dishwasher will automatically stop and the End of  
cycle phase indicator light will illuminate.  
The indicator light of the programme just ended will  
remain on.  
2. Turn on the water tap  
Switch off the dishwasher by pressing the On/Off push  
button, the On/Off indicator light turns off.  
Open the door and wait a few minutes before removing  
the dishes; in this way they will be cooler and the drying  
will be improved.  
3. Close the dishwasher door  
4. Press the On/Off push button  
The On/Off indicator light will come on (setting mode).  
8. Unloading the dishwasher  
Hot dishes are sensitive to knocks. The dishes should  
therefore be allowed to cool down before removing from  
the appliance.  
5. Setting and starting the programme  
Press the push button corresponding to the required  
programme (see "Washing programmes" chart).  
The indicator light corresponding to the programme and  
the phase indicator lights foreseen for that programme will  
start blinking.  
Empty the lower basket first and then the upper one; this  
will avoid water dripping from the upper basket onto the  
dishes in the lower one.  
Water may appear on the sides and the door of the  
dishwasher as the stainless steel will eventually become  
cooler than the dishes.  
After about 3 seconds from the last pressure of a push  
button the programme starts automatically.  
Once the programme has started the phase indicator lights  
will turn off except for the phase under way.  
Note: it is possible to select a washing programme also  
with the door slightly opened.  
In this case the start of the programme will occur after the  
closure of the door. Until this moment it is possible to  
change the setting made.  
When the washing programme has finished, it is  
recommended that the dishwasher is unplugged and the  
water tap turned off.  
a) Press On/Off push button.  
b) Select a washing programme.  
c) Close the door.  
The programme or the countdown will start automatically  
after the closure of the door.  
6. To interrupt or cancel a washing  
programme in progress  
Interrupt or cancel a washing programme in progress  
ONLY if it’s absolutely necessary.  
Attention! Hot steam may escape when the door is  
opened. Open the door carefully.  
To interrupt a washing programme in  
progress  
a) Open the dishwasher door; the programme will stop.  
Close the door; the programme will start from the  
point in which it was interrupted.  
b) Press the On/Off push button (in this case all the  
indicator lights turn off). Press the On/Off push button  
again; the programme will start from the point in which it  
was interrupted.  
To cancel a washing programme in  
progress  
To cancel a washing programme in progress, press  
simultaneously the function push buttons 2 and 3 until all  
the indicator lights will turn off (except for the On/Off  
indicator light and eventually the rinse aid and salt  
indicator lights) indicating that the running programme has  
been cancelled.  
(If a new washing programme will be selected, check that  
there is detergent in the detergent dispenser).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and cleaning  
Clean the external surfaces of the machine and control panel  
with a damp soft cloth. If necessary use only neutral  
detergents. Never use abrasive products, scouring pads or  
solvent (acetone, trichloroethylene etc....).  
Attention!  
Under no circumstances may the dishwasher be used without  
filters.  
Incorrect repositioning and fitting of the filters will produce  
poor washing results.  
Ensure that the seals around the door, the detergent and rinse  
aid dispensers are cleaned regularly with a damp cloth.  
We recommend the use of Finish Dishwasher Cleaner every  
3 months or run a 65°C wash programme without dishes using  
detergent.  
NEVER try to remove the  
upper spray arm.  
Regular use of Finish Dishwasher Cleaner cleans  
inaccessible parts, eliminates unpleasant food odours and  
helps prevent the build-up of limescale.  
If residues of soil have  
clogged the holes in the  
upper spray arm, remove  
them with a toothpick.  
Cleaning the filters  
The filters must be checked and cleaned from time to time.  
Dirty filters will degrade the washing result.  
MA40  
1. Open the door, remove the lower basket.  
2. The dishwasher filter system comprises a coarse/fine filter  
(A/B), a microfilter (C) and a flat filter (D).  
Some dishwasher will only have a coarse filter (A), a  
microfilter (C) and a flat filter (D).  
Prolonged periods of non-operation  
If you are not using the machine for any period of time you are  
advised to:  
Unlock the filter system using the handle on the microfilter,  
and remove.  
1. Unplug the appliance and then turn off the water.  
2. Leave the door ajar to prevent the formation of any  
unpleasant smells.  
3. Leave the inside of the machine clean.  
Frost precautions  
Avoid placing the machine in a location where the temperature  
is below 0°C. If this is unavoidable, empty the machine, close  
the appliance door, disconnect the water inlet pipe and empty  
it.  
MA35  
MA32  
1
4
3. Turn the handle about / a turn anticlockwise and remove.  
Moving the machine  
If you have to move the machine (moving house etc....):  
1. Unplug it.  
2. Turn the water tap off.  
3. Remove the water inlet and discharge hoses.  
4. Pull the machine out together with the hoses.  
Avoid over tilting the machine during transportation.  
MA36  
4. Take hold of the coarse/fine filter (A/B) by the handle with  
the hole and remove from the microfilter (C).  
5. Clean all filters thoroughly under running water.  
6. Remove the flat filter (D) from the base of the washing  
compartment and clean both faces thoroughly.  
MA31  
7. Put the flat filter (D) back in the base of the washing  
compartment.  
8. Place the coarse/fine filter (A/B) in the microfilter (C) and  
press together.  
9. Put the filter combination in place and lock by turning the  
handle clockwise to the stop. During this process ensure  
that the flat filter does not protrude above the base of the  
washing compartment.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to do, when...  
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions  
given here, without calling out an engineer.  
...a flashing fault code appears  
The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button and a  
combination of indicator lights, as indicated in the following chart, are flashing. Open the dishwasher’s door and carry out the  
following suggested corrective actions.  
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will  
be made, even if the appliance is in guarantee.  
Fault code / malfunction  
Possible cause  
Solutions  
- Indicator light of the  
programme in progress is  
flashing.  
The water tap is blocked or furred with  
limescale.  
Clean the water tap.  
The water tap is turned off.  
Turn the water tap on.  
- 1 flash of the indicator  
light "End of cycle".  
The filter (where present) in the threaded hose  
fitting at the water inlet valve is blocked.  
Clean the filter in the threaded hose  
fitting.  
The machine does not fill with  
water.  
The water inlet hose has not been correctly laid  
or it is bent or squashed.  
Check the water inlet hose connection.  
- Indicator light of the  
programme in progress is  
flashing.  
The siphon is blocked.  
Clean out the siphon.  
The water drain hose has not been correctly laid Check the water drain hose connection.  
or it is bent or squashed.  
- 2 flashes of the indicator light  
"End of cycle".  
The dishwasher will not drain.  
- Indicator light of the  
programme in progress is  
flashing.  
Protection against flooding is active.  
Close the water tap and contact the  
Service Force Centre.  
- 3 flashes of the indicator light  
"End of cycle".  
Once the checks have been carried out, close the door and press the push button of the programme that was running before the  
intervention of the alarm, the programme will continue from the point in which it was interrupted. If the fault code reappears contact  
the Service Force Centre.  
For other combinations of fault codes not described in the above chart will appear, please contact your Service Force Centre.  
...there are problems when operating the dishwasher  
Fault  
Possible cause  
Solutions  
The dishwasher door has not been properly  
closed.  
Close the door.  
The programme does not start  
The main plug is not plugged in.  
Insert the mains plug.  
Replace the fuse.  
The fuse has blown in the household fuse box.  
There is a whistling noise during  
washing  
The whistling is not a cause for concern.  
Use a different brand of detergent.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
...the wash results are not satisfactory  
The dishes are not clean  
G The wrong washing programme has been selected.  
G The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.  
G The spray arms do not rotate freely due to wrong arrangement of the load.  
G The filters in the base of the washing compartment are dirty or incorrectly positioned.  
G Too little or no detergent has been used.  
G Where there are limescales deposits on the dishes; the salt container is empty or the wrong level of the water softener has been  
selected.  
G The drain hose connection is not correct.  
G The salt container cap is not properly closed.  
The dishes are wet and dull  
G Rinse aid was not used.  
G The rinse aid dispenser is empty.  
There are streaks, milky spots or a bluish coating on glasses and dishes  
G Decrease rinse aid dosing.  
Water drops have dried onto glasses and dishes  
G Increase rinse aid dosing.  
G The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.  
If after all these checks, the problem persists, contact your  
local Service Force Centre, quoting the model (Mod.), product  
number (PNC) and serial number (S.N.).  
This information can be found on the rating plate located on  
the side of the dishwasher door (see picture).  
So that you always have these numbers at hand, we  
recommend you to make a note of them here:  
Mod. : . . . . . . . . . . . . . . . . . .  
PNC : . . . . . . . . . . . . . . . . . .  
S.N. : . . . . . . . . . . . . . . . . . .  
RA08  
This product should be serviced by an authorised service  
engineer, and only genuine spare parts should be used.  
Under no circumstances should you attempt to repair the  
machine yourself.  
Repairs carried out by inexperienced persons may cause injury  
or serious malfunctioning. Contact your local Service Force  
Centre.  
Always insist on genuine spare parts.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service and Spare Parts  
In the event of your appliance requiring service, or if you wish  
to purchase spare parts please contact your local Service  
Force Centre by telephoning:  
08705 929929  
Your telephone call will be automatically routed to the Service  
Force Centre covering your post code area.  
For the address of your local Service Force Centre and further  
information about Service Force, please visit the website at  
Before calling out an engineer, please ensure you read the  
details under the heading "What to do, when...".  
When you contact the Service Force Centre you will need to  
give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of the fault  
4. The model and serial number of the appliance (found on the  
rating plate)  
5. The purchase date  
Please note that a valid purchase receipt or guarantee  
documentation is required for in-guarantee service calls.  
For Customer Service in Ireland please contact us at the  
address below:  
Zanussi-Electrolux  
Electrolux Group (Irl) Ltd  
Long Mile Road  
Dublin 12  
Republic of Ireland  
Tel: + 353 (0)1 4090751  
Customer Care  
Department  
For general enquiries concerning your Zanussi-Electrolux  
appliance or for further information on Zanussi-Electrolux  
products please contact our Customer Care Department by  
letter or telephone at the address below or visit our website at  
Customer Care Department  
Zanussi-Electrolux  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
Tel: 08705 727727 ( )  
*
calls to this number may be recorded for training purposes  
*
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee Conditions  
Standard Guarantee Conditions  
European Guarantee  
We, Zanussi-Electrolux, undertake that if within 12 months of  
the date of purchase this ZANUSSI-ELECTROLUX appliance  
or any part thereof is proved to be defective by reason only of  
faulty workmanship or materials, we will, at our option repair or  
replace the same FREE OF CHARGE for labour, materials or  
carriage on condition that:  
If you should move to another country within Europe then your  
guarantee moves with you to your new home subject to the  
following qualifications:  
G The guarantee starts from the date you first purchased your  
product.  
G The guarantee is for the same period and to the same extent  
for labour and parts as exists in the new country of use for  
this brand or range of products.  
G The appliance has been correctly installed and used only on  
the electricity supply stated on the rating plate.  
G The appliance has been used for normal domestic purposes  
only, and in accordance with the manufacturer’s instructions.  
G This guarantee relates to you and cannot be transferred to  
another user.  
G The appliance has not been serviced, maintained repaired,  
taken apart or tampered with by any person not authorised  
by us.  
G Your new home is within the European Community (EC) or  
European Free Trade Area.  
G The product is installed and used in accordance with our  
instructions and is only used domestically, i.e. a normal  
household.  
G All service work under this guarantee must be undertaken by  
a Service Force Centre.  
G Any appliance or defective part replaced shall become the  
Company’s property.  
G The product is installed taking into account regulations in  
your new country.  
G This guarantee is in addition to your statutory and other legal  
rights.  
Before you move please contact your nearest Customer Care  
centre, listed below, to give them details of your new home.  
They will then ensure that the local Service Organisation is  
aware of your move and able to look after you and your  
appliance.  
Home visits are made between 8.30am and 5.30pm Monday  
to Friday. Visits may be available outside these hours in which  
case a premium will be charged.  
France  
Senlis  
+33 (0) 344 62 29 29  
+49 (0) 800 234 7378  
+39 (0) 434 39 4700  
+46 (0) 8 672 53 90  
+44 (0)1753 219897  
+353 (0)1 4090751  
Exclusions  
This guarantee does not cover:  
Germany Nurnberg  
Italy  
Pordenone  
Stockholm  
Slough  
G Damage or calls resulting from transportation, improper use  
or neglect, the replacement of any light bulbs or removable  
parts of glass or plastic.  
Sweden  
UK  
Ireland  
Dublin  
G Costs incurred for calls to put right an appliance which is  
improperly installed or calls to appliances outside the United  
Kingdom.  
G Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
G Products of Zanussi-Electrolux manufacture which are not  
marketed by Zanussi-Electrolux.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Any electrical and/or plumbing work required to install  
this appliance should be carried out by a qualified  
electrician and/or plumber or competent person.  
Water supply connections  
This dishwasher must be plumbed into a cold water supply.  
For making the connection itself, the coupling nut fitted to the  
machine’s supply hose is designed to screw onto either a 3/4"  
inch gas thread spout or to a purpose made quick-coupling tap  
such as the Press-block.  
Remove all packaging before positioning the machine.  
If possible, position the machine next to a water tap and a  
drain.  
The water pressure must be within the limits given in the  
"Technical specifications". Your local Water Authority will  
advise you on the average mains pressure in your area.  
Fitting under a counter  
The water inlet hose must not be kinked, crushed, or entangled  
when it is being connected up.  
(kitchen worktop or sink)  
By removing the machine’s worktop, you can install it under a  
close fitting sink unit or a pre-existing top, providing the  
dimensions of the recess correspond to those shown in the  
picture.  
The dishwasher features fill and drain hoses which can be  
turned either to the left or the right to suit the installation by  
means of the locknut. The locknut must be correctly fitted  
to avoid water leaks. (Attention! NOT all models of  
dishwashers have fill and drain hoses provided with locknut. In  
this case, this kind of facility is not possible).  
If the machine is connected to new pipes or pipes which have  
not been used for a long time, you should run the water for a  
few minutes before connecting the inlet hose.  
Do not use, for connection, old hoses which have been  
used in another appliance.  
600  
The dishwasher is fitted with safety devices that prevent the  
wash water returning into the drinking water system and  
comply with the applicable plumbing regulations.  
IN05  
Proceed as follows:  
Remove the machine’s worktop by unscrewing the two rear  
retaining screws, pull the worktop from the back of the  
machine and slide out the front slots, lifting the worktop.  
Insert the machine after adjusting height and levelling with the  
adjustable feet. When inserting the machine, ensure that the  
water inlet and drain hoses are not kinked or squashed.  
During all operations that involve accessibility to internal  
components the dishwasher has to be unplugged.  
Be sure that once the appliance has been installed, it is easily  
accessible for the consumer service department.  
If the dishwasher is later used as a free-standing appliance,  
the original worktop must be re-mounted.  
The plinth on free-standing appliances is not adjustable.  
Levelling  
Good levelling is essential for correct closure and sealing of  
the door.  
When the appliance is correctly levelled, the door will not catch  
on either side of the cabinet.  
If the door does not close correctly, loosen or tighten the  
adjustable feet until the machine is perfectly level.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water outlet hose connection  
Electrical connection  
The end of the drain hose can be connected in the following  
ways:  
This appliance must be earthed.  
The manufacturer declines any responsibility should this  
safety measure not be observed.  
1. To the sink outlet spigot, securing it to the underside of the  
work surface. This will prevent waste water from the sink  
running into the machine.  
If the plug that is fitted to your appliance is not suitable for the  
socket, it must be cut off and the appropriate plug fitted.  
2. Hooked over the edge of the sink using the special curved  
plastic guide (if provided with the machine).  
Important  
The wires on the mains lead are coloured in accordance with  
the following code:  
3. To a stand pipe provided with vent-hole, minimum internal  
diameter 4 cm.  
Green and Yellow - Earth  
Blue  
- Neutral  
- Live  
The waste connection must be at a height of between 30 cm  
(minimum) and 100 cm (maximum) from the bottom of the  
dishwasher.  
Brown  
If you fit your own plug, the colours of the wires in the mains  
lead of your appliance may not correspond with the markings  
identifying the terminals in your plug.  
The drain hose can face either to the right or left of the  
dishwasher  
Ensure the hose is not bent or squashed as this could prevent  
or slow down the discharge of water.  
Proceed as follows:  
1. Connect the Green and Yellow (earth) wire to the terminal  
The sink plug must not be in place when the machine is  
draining as this could cause the water to siphon back into the  
machine.  
in the plug which is marked with the letter "E" or the earth  
symbol  
or coloured green and yellow.  
2. Connect the Blue (neutral) wire to the terminal in the plug  
If you use a drain hose extension it must be no longer than 2  
metres and its internal diameter must be no smaller than the  
diameter of the hose provided.  
which is marked with the letter "N" or coloured black.  
3. Connect the Brown (live) wire to the terminal in the plug  
which is marked with the letter "L" or coloured red.  
E
L
N
CS18  
Likewise the internal diameter of the couplings used for  
connections to the waste outlet must be no smaller than the  
diameter of the hose provided.  
CE04  
Attention!  
Our appliances are supplied with a security device to protect  
against the return of dirty water back into the machine.  
If the spigot of your sink has a "no return valve" incorporated  
this can prevent the correct draining of your dishwasher.  
We advise you therefore to remove it.  
The plug moulded onto the lead incorporates a 13amp BSI362  
fuse. Only ASTA or BSI fuses should be used.  
The plug must not be used if the fuse cover/carrier is lost. The  
cover/carrier is indicated by the coloured insert at the base of  
the plug.  
A replacement cover/carrier must be obtained from your local  
Service Force Centre.  
To isolate the dishwasher from mains, remove the mains plug.  
Important!  
The plug must still be accessible after the appliance  
has been installed.  
The appliance should not be connected to the  
electrical supply by means of an extension cable.  
In case that the electrical cable has to be replaced,  
please contact your local Service Force Centre.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints for test centres  
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing  
programmes" chart).  
Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and  
rinse aid respectively and using the test programme (see "Washing programmes" chart).  
Load:  
12 standard place settings  
position 4 (Type III)  
Rinse aid setting:  
Detergent dosage :  
5 g + 25 g (Type B)  
Arrangement upper basket  
Arrangement lower basket  
Arrangement cutlery basket  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
From the Electrolux Group. The world’s No.1 choice.  
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,  
cleaning and outdoor use. More than 55 million Electrolux Group products (such as  
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year  
to a value of approx. 14 billion USD in more than 150 countries around the world.  
©
Subject to change without notice  
Electrolux plc 2004  
0 04/04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Power Supply MA7200 2003 N1 Thru MA7200 2040 N1 User Manual
Whirlpool Washer 3347017 User Manual
Wibur Curtis Company Coffeemaker EMTS TWIN User Manual
Wilton Saw JMS 10CMS User Manual
X Micro Tech Computer Drive Bluetooth USB Dongle User Manual
Yamaha Blu ray Player BD S473BL User Manual
Yamaha Drums DD 10 User Manual
Yamaha Music Mixer EMX212Ss User Manual
Yamaha Stereo Receiver HTR 5250 User Manual
Zanussi Refrigerator 110001 User Manual