DISHWASHER
ZDT 5052
INSTRUCTION BOOK
152975 47/0
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure
that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and
the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the
appliance.
G Long bladed knives stored in an upright position are a
potential hazard.
G Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
G When finishing loading or unloading close the door, as an
open door can be a hazard.
G Do not sit or stand on the open door.
Installation
G This appliance is heavy. Care should be taken when
moving it.
G It is dangerous to alter the specifications or attempt to
modify this product in any way.
G Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
G Any electrical work required to install this appliance should
be carried out by a qualified electrician or competent
person.
G Any plumbing work required to install this appliance should
G Isolate the appliance from the power supply and turn off the
water supply after use.
G Care should be taken when cleaning the bottom door seal
and hinge area as any exposed metal edges may cut if
care is not taken.
G This product should be serviced by an authorised Service
be carried out by a qualified plumber or competent person.
engineer, and only genuine spare parts should be used.
Child Safety
G This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls
or play with the product.
G Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre. Always insist on
genuine spare parts.
G Keep all packaging well away from children.
G Keep all detergents in a safe place out of children's reach.
Conservation
In the interest of the environment:
During Use
G Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
G Under no circumstances should you open the door whilst
the appliance is in operation. Always turn off the appliance
before opening the door.
G Materials marked with the symbol
are recyclable.
G Check with your local Council or Environmental Health
Office to see if there are facilities in your area for re-cycling
this appliance.
G When the appliance is to be scrapped, cut off the power
supply cable and make the door closing device unusable to
prevent young children from being trapped inside.
G Only use detergent specifically designed for use in
G Help to keep your country tidy - use authorised disposal
dishwashers.
sites for your old appliance.
Description of the appliance
1. Levelling spacers
2. Upper basket stop
3. Lower spray arm
4. Large filter
5. Salt container
6. Detergent dispenser
7. Rinse aid dispenser
8. Control panel
9. Central filter
10. Upper spray arm
11. "SID" detergent dispenser
(Super Intensity Dispenser)
12. Upper basket
IN71
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The control panel
In this fully integrated appliance the controls are located on
the top of the door. When selecting a programme, the door
needs to be open.
To reactivate the audible signals, press simultaneously and
keep pressed both NORMAL 65°c and BIO 50°c push
buttons, during the pressure of the push buttons no signal will
be heard for about 3 seconds, after this time an intermittent
audible signal will start, this means that the audible signals
have been reactivated.
1. On/Off push button
2. Salt refilling indicator light
3. On/Off indicator light
Both operations (to deactivate or reactivate the audible
signals) must be carried out before starting a washing
programme; the setting will remain memorised after
switching off the dishwasher.
4. Programme selection push buttons
5. End of cycle indicator light
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the push buttons are pressed (except the
On/Off push button), a short audible signal informs you that
the machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal, heard only when you close the
door, informs you that the washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the wash
programme has ended.
To deactivate the audible signals, press simultaneously and
keep pressed both NORMAL 65°c and BIO 50°c push
buttons, during the pressure of the push buttons an
intermittent audible signal will be heard for about 3 seconds,
after this time the audible signal will turn off, this means that
the audible signals have been deactivated.
SO234
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using your dishwasher for the
first time:
To select a different level proceed as follows:
1. Press NORMAL 65°c and QUICK 50°c programme push
buttons simultaneously for about 5 seconds. The indicator
light of the programme corresponding to the current level
flashes.
1. Ensure that the electrical and water connections comply
with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with salt
5. Fill the rinse aid dispenser.
SO235
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million).
2. Press within 5 seconds the programme push button
corresponding to the required level you want to select.
3. 5 seconds after a programme push button has last been
pressed, the dishwasher memorises the level selected and
returns to the programme setting mode.
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener should be
adjusted.
Filling with salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
Only fill with salt just before starting one of the complete
washing programmes. This will prevent any grains of salt
or salty water, which may have been spilled, remaining on
the bottom of the machine for any period of time, which
may cause corrosion.
You may change the factory setting level by means of the
wash programme selection push buttons. Each button
corresponds to a different level
Level 1 = programme push button RINSE AND HOLD
Level 2 = programme push button INTENSIVE 70°c
Level 3 = programme push button NORMAL 65°c
Level 4 = programme push button BIO 50°c
To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
Level 5 = programme push button QUICK 50°c
3. Using the funnel provided,
pour in the salt until the
container is full.
T
SAL
Water hardness
PPM
(Parts per
Million)
Use of
salt
French
degrees
(°TH)
Clarke
degrees
Do not worry if water over
flows from the unit when
filling with salt, this is quite
normal.
Level
0 - 140
0 - 10
11 - 27
28 - 35
36 - 49
50 - 63
0 - 14
15 - 39
40 - 50
51 - 70
71 - 90
NO
1
2
3
4
5
141 - 390
400 - 500
501 - 700
701 - 900
4. Replace the cap making
YES
YES
YES
YES
sure that there is no trace
of salt on the screw thread
or on the gasket.
SR03
5. Screw on the cap tightly.
The salt container will require topping up periodically.
If your water is level 1 it is already soft and therefore
there is no need to use salt.
With the setting of the water softener at level 1 the salt
indicator light on the control panel will always remain off.
Use salt from level 2 upwards.
You are reminded of this by the salt indicator light on the
control panel which comes on when the salt has finished.
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer.
The adjustment of the water softener is possible only with
the machine in setting mode.
The function of the machine is not affected.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Use of detergent
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Only use detergents specifically designed for use in
dishwashers.
We recommend the use of Finish detergents which are
available in the following options:
Finish Double Action Tablets. Each tablet has the exact
amount of detergent required, simply place in the dispenser.
Filling with rinse aid
1. Open the container by turning the lid (A) anticlockwise.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the gel is extra
gentle it is recommended for fine bone china.
2. Add the rinse aid until the container is completely full.
The indicator (B) will be completely dark.
If using powder detergents proceed as follows:
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the instructions given in the
Washing programmes chart.
B
As all detergents are not the same, you should also consult
the instructions on the packet.
5
4
6
3. Always close the lid.
1
4. If the programme has a prewash add a little amount of
detergent in the SID detergent dispenser, located in the
centre of the upper basket.
Follow the recommended quantity of detergent given in the
Washing programmes chart.
3. Top up the rinse aid when the indicator (B) becomes clear.
Ensure that the lid is closed after every refill.
Min = 15 g
Max = 30 g
Do not put liquid detergent in the rinse aid compartment.
Clean up any rinse aid spilt during filling with an absorbent
cloth to avoid excess foaming during the next wash.
D
M A X
M I N
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
DE17
DE14
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
If using detergent in tablets proceed as
follows:
Reduce it if there are sticky whitish streaks on the dishes.
1. For all programmes; place 1 tablet inside the detergent
dispenser.
2. Always close the lid.
3. For all programmes with prewash; place a portion of a
further tablet on the lid of the detergent dispenser.
Insufficient quantities of detergent will produce poor
washing results, whereas an excessive amount of
detergent will not improve washing results and is also
wasteful.
m
1
Using no more than the correct amount also contributes
to reducing pollution.
Compact detergents with enzymes
In these compact powders the environmentally unfriendly
components have been replaced by natural enzymes and
other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a
temperature as low as 50°C.
By choosing the BIO programmes you can therefore achieve
the same cleaning results that would otherwise be achievable
only with 65°C programmes and conventional detergents.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Do not load very small items which can fall through the
baskets.
Arrange items so that water
can reach all surfaces.
Open the door and slide out the baskets to load the dishes.
Glasses with long stems can
be placed upside down in the
cup racks.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can
turn freely.
Light items (plastic bowls
etc.) should be loaded in the
upper basket and arranged
so they do not move.
US69
Attention!
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper
basket
UI61
UI24
If washing very large plates (over 27 cm and up to 31 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher position.
The two rear rows of prongs on the lower basket can be easily
lowered to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down (see
picture).
- To bring them back to the standing position, just pull them
up again.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the
stops (A) in their original position.
A
UI83
UI84
RC01
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard.
When the top basket is in the higher position it will only take
plates up to 20 cm in diameter and you will not be able to use
the cup racks.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Attention!
After loading your machine always close the door, as an
open door can be a hazard.
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards.
If the handles protrude from the
bottom of the basket, obstructing
the lower spray arm, load the
cutlery with the handles facing
upwards.
Mix spoons with other cutlery to
prevent them from sticking together.
Silver cutlery tends to go black if
mixed with steel cutlery. Place it in
the cutlery basket separate from
the others.
UI10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
To save energy
Place dishes in the machine immediately after every meal and
wait until the dishwasher is full before washing.
Do not prewash dishes under running water.
If necessary run the Rinse and Hold programme (see
"Washing programmes" chart) so that any food scraps do not
become caked on the dishes while you are waiting to run the
complete wash programme.
For best washing results
Before loading, remove all scraps of food and soak very
heavily soiled pots and pans.
Arrange saucepans, cups and glasses etc. upside-down.
Tilt items with convex or concave surfaces so that the water
drains off easily.
Avoid contact between the dishes as far as possible.
Items not suitable for dishwashers
The following items should not be washed in the dishwasher
(unless they are sold as dishwasher proof):
- Cutlery with wooden or horn handles or glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
- crystal ware
- leaded glass
- plastic items
- antique or fine decorated china
Certain types of decoration can discolour when washed in a
dishwasher.
Crystal-ware and plastic objects, if not guaranteed dishwasher
proof should be washed by hand.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
A chemical reaction can occur between silver cutlery and
stainless steel cutlery. As a precaution, do not wash together.
Iron and cast iron objects can rust and stain other items.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of the item.
When buying new dishes, ensure that they are
dishwasher proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
W
E
L
N
OUB
ION
T
C
E
A
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Programme
Type of load
and
Required
push buttons
Recommended
quantity of detergent
Cycle
description
degree of soil
wash
prewash
On/Off
RINSE AND
HOLD
1 cold rinse (to avoid food
scraps from sticking together)
Any. Partial load (to be
completed later in the day)
+
/
/
RINSE AND HOLD
Hot prewash
Main wash up to 70°C
2 cold rinses
1 hot rinse
On/Off
+
Heavy soil.
Crockery, cutlery, pots and
pans
INTENSIVE
70°c
15 g
20 g
10 g
5 g
INTENSIVE 70°c
Drying
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying
On/Off
+
NORMAL 65°c
Normal soil.
Crockery and cutlery
NORMAL
65°c
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Drying
On/Off
+
Normal soil.
Crockery and cutlery
BIO
*
20 g
25 g
5 g
/
50°c
BIO 50°c
Light soil.
Crockery, cutlery and party
crockery
On/Off
+
QUICK 50°c
Main wash up to 50°C
1 cold rinse
1 hot rinse
QUICK
**
50°c
Testing programme for EN 50242 (see "Hints for Test Centres).
*
This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-
use them promptly
**
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard
EN 50242
Reference programme:
Load:
BIO 50°c
9 standard place settings
position 4
Rinse aid selector:
Detergent dosage :
20 g in the dispenser
5 g on the dispenser lid
Arrangement
lower basket
Arrangement
upper basket
Arrangement
cutlery basket
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
1. Check the filters
10. Switch off the dishwasher
Ensure they are clean and properly positioned (see
"Maintenance and cleaning").
Open the door and switch off the dishwasher by
pressing the On/Off push button.
Wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be improved
2. Press the On/Off push button
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
The On/Off indicator light comes on.
3. Check that there is rinse aid and salt
11. Cancel a programme
To change a programme in progress, open the door and
press the push button of the programme under way for
more then 1 second, until the corresponding indicator
light goes out.
The dishwasher is now reset and you can select a new
programme.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans,
plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
Important!
In general it is not advisable to open the door while the
machine is working; if the door is opened however, a
safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot
phase or immediately after a programme has finished, as
steam may escape.
5. Ensure that the spray arms can
rotate freely
6. Measure out detergent
Add the required amount of detergent according to the
dosage quantity given in the "Washing programmes"
chart.
Close the detergent dispenser lid.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
7. Set the programme
Select the required programme with the door open.
Press the programme push button which corresponds to
the washing programme you wish to select, the
corresponding indicator light will flash.
If you want to change washing programme, simply press
another programme push button.
8. Start the programme
Close the door.
An audible signal advises you that the programme has
started.
The indicator light which corresponds to the programme
under way is now permanently on.
9. At the end of the washing
programme
The dishwasher will automatically stop and an audible
signal informs you that the programme has ended.
The "end of cycle" indicator light flashes.
The On/Off indicator light remains on until the On/Off
push button is depressed.
Wait until the end of the audible signal before opening
the door.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
Check that the SID is not clogged with detergent residue. If
necessary rinse it under running water after having removed it
from the basket by twisting it anticlockwise and pulling it
upwards.
We recommend the use of Finish Dishwasher Cleaner every
3 months or run a 65°C wash without dishes using detergent.
Regular use of Finish Dishwasher Cleaner cleans inaccessible
parts, eliminates unpleasant food odours and helps prevent
the build-up of limescale.
Fasten it back onto the support by turning it clockwise.
Cleaning the central filter
(After each wash)
Inspect the central filters (B) and (C) and remove any scraps
of food with a brush, under running water.
MA12
Filters (B) and (C) are both removed by lifting up the outer one
(B) (pulling the central filter upwards); the smaller filter (C) can
be removed by pressing the two tongues (D).
Never use your dishwasher without the SID dispenser.
Since SID also ensures correct distribution of the water to
the upper spray arm, running the dishwasher without it
will impair the washing results.
C
D
B
External cleaning
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
MA02
MA08
Once cleaned, refit the filter by pressing them down until they
click into place.
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of any
Cleaning the large filter
(Every week)
Clean the large filter (A) on both sides under running water,
using a brush.
To take it out, remove the spray arm by pressing the two
tongues (E), turn the ring (F) anticlockwise and then slide the
whole part out. refit the filter following the above instructions in
reverse order.
unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
E
Avoid placing the machine in a location where the temperature is
below 0°C. If this is unavoidable, empty the machine, close the
appliance door, disconnect the water inlet pipe and empty it.
A
F
MA03
Moving the machine
If you have to move the machine (moving house etc....):
1. Unplug it.
The dishwasher must not be used without filters.
Incorrect repositioning and fitting of the filters will
produce poor washing results.
Cleaning the filters is vital to ensure correct operation of
the machine.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
If the dishwasher will not start or stops during operation, all push buttons are inoperative except for the On/Off push button, the
On/Off indicator light is off, one or more of the programme indicator lights start flashing, open the door and press the On/Off push
button to switch off the dishwasher and carry out the following suggested corrective actions listed below.
Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code reappears
contact your local Service Force Centre.
Important:If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will
be made, even if the appliance is in guarantee.
Symptom
Fault code
Solution
The machine will not start
G The door has not been properly closed.
G The plug is not properly inserted in the power socket.
G There is a power failure.
The machine does not fill
with water
RINSE AND HOLD
programme
indicator light is
flashes
G Ensure the water tap is open.
G Ensure the mains water supply has not been cut off.
G The inlet hose may be squashed or bent. Reposition the hose.
G The inlet hose may be blocked. Switch off the water supply
and clean the filter.
The dishwasher will not drain
QUICK programme
indicator light is
flashing
G The drain hose may be squashed or bent. Reposition the
hose.
G The sink may be blocked. Clear any blockages.
G The drain hose extension is not correct. Follow the instructions
for connecting to the waste.
G There is no vent in the end of the drain hose.
The filters are clogged
General
INTENSIVE
programme indicator
light is flashing
G Clean the filters (refer to "Maintenance and cleaning").
Other programme
indicator lights are
flashing
G Switch off the dishwasher. Switch it back on and start the
programme. If the alarm reappears, call the local Service
Force Centre.
The machine is noisy
G Dishes are rattling against each other, refer to “Loading
your machine”.
G The spray arms are knocking against the dishes. Refer
to "Loading your machine".
The door is difficult to close
G The dishwasher is not level, or not properly built-in.
Visible lime deposits or
white film on the dishes
G Check that there is salt and that the salt cap is tight.
G Check that the right level of the water softener is setted.
The dishes are not quite dry
G The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
G The baskets are too full.
G The dishes have not been arranged properly.
G The spray arms do not rotate
G The spray arms are clogged.
G The filters are not in the correct position.
G Not enough detergent has been used or it is unsuitable.
G The detergent is old or has gone hard.
G The salt container cap is not properly closed.
G The washing programme selected is too gentle.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model and serial
number. This information can be found on the rating plate
located on the right hand side of the dishwasher door (see
picture).
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force
Centre by telephoning:
08705 929929
Your telephone call will be automatically routed to the Service Force centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
Before calling out an engineer, please ensure you read the details under the heading Something not working.
When you contact the Service Force Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number (found on the rating plate)
5. The purchase date
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our
Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727727 ( )
*
calls to this number may be recorded for training purposes
*
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee Conditions
Standard guarantee conditions
We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be
defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE
for labour, materials or carriage on condition that:
G The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
G The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
G The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us.
G All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
G Any appliance or defective part replaced shall become the Company’s property.
G This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case
a premium will be charged.
Exclusions
This guarantee does not cover:
G Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts
of glass or plastic.
G Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
G Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
G Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the
following qualifications:
G The guarantee starts from the date you first purchased your product.
G The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this
brand or range of products.
G This guarantee relates to you and cannot be transferred to another user.
G Your new home is within the European Community (EC) or European free Trade Area.
G The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
G The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will
then ensure that the local service Organisation is aware of your move and able to look after you and your appliances.
France
Senlis
+33 (0) 3 44 62 29 29
+49 (0) 800 234 7378
+39 (0) 0434 39 4700
+46 (0) 8 672 53 90
+44 (0) 1753 219897
+353 (0) 14090753
Germany Nurnberg
Italy
Pordenone
Stockholm
Slough
Sweden
UK
Ireland
Dublin
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent
person.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the
technical specifications (page 2).
+ 2 m max
CS14
Your local Water Authority will advise you on the average
mains pressure in your area.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation.
Do not use, for the connection, old hoses which have
been used in another appliance.
The locknut must be correctly fitted to avoid water leaks.
Avoid bends or kinks in the hose which could prevent or slow
down the water supply.
If the machine is connected to new pipes or pipes which have
not been used for a long time, you should run the water for a
few minutes before connecting the inlet hose. This will prevent
deposits of sand or rust clogging the inlet hose filter.
Electrical connection
This appliance must be earthed.
The manufacturer declines any responsibility should this
safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.
Important
The wires on the mains lead are coloured in accordance with
the following code:
Green and Yellow - Earth
Blue
- Neutral
- Live
Brown
Water outlet hose connection
The end of the drain hose can be connected in the following
ways:
If you fit your own plug, the colours of the wires in the mains
lead of your appliance may not correspond with the markings
identifying the terminals in your plug.
1. To the sink outlet spigot, securing it if necessary with a clip.
2. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
E
1
2
L
N
CS13
CE04
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal
The drain hose can face either to the right or left of the
dishwasher
in the plug which is marked with the letter "E" or the earth
symbol
or coloured green and yellow.
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
2. Connect the Blue (neutral) wire to the terminal in the plug
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back into the
machine.
which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
Attention!
The plug moulded onto the lead incorporates a 13amp BSI362
fuse. Only ASTA or BSI fuses should be used.
Our appliances are supplied with a security device to
protect against the return of dirty water back into the
machine.
If the spigot of your sink has a "no return valve"
incorporated this can prevent the correct draining of your
dishwasher.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of
the plug.
A replacement cover/carrier must be obtained from your local
Service Force Centre.
We advise you therefore to remove it.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
©
Electrolux Household Appliances Limited 2002
0 01/02
Download from Www.Somanuals.com. All Manuals Search And Download.
|