DISHWASHER
ZDS 300
GB
Instruction book
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that
the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the
relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the
appliance.
G Under no circumstances should you attempt to repair the
Installation
G Check your dishwasher for any transport damage. Never
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre. Always insist on
genuine spare parts.
connect a damaged machine. If your dishwasher is
damaged, you should contact your supplier.
G For safety reasons it is dangerous to alter the specifications
or attempt to modify this product in any way.
G Any electrical and plumbing work required to install this
Disposal
appliance should be carried out by a qualified and
competent person.
Dispose of the dishwasher packaging material correctly.
All packaging materials can be recycled.
G Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
Plastic parts are marked with standard international
abbreviations:
G The sides of the dishwasher must never be drilled to
>PE<
>PS<
for polyethylene, e.g. sheet wrapping material.
for polystyrene, e.g. padding material (always CFC-
free).
prevent damage to hydraulic components.
Child safety
>POM< for polyoxymethylene, e.g. plastic clips.
Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for
recycling.
As and when you cease to use your dishwasher and withdraw
it from service, your should render it unserviceable before
having it disposed of.
G This appliance is designed to be operated by adults.
G Children should not be allowed to tamper with the controls
or play with the product.
G Packaging parts may be dangerous for children, who could
even be suffocated! You should therefore keep all
packaging well away from children.
Warning! Children at play could lock themselves in your
dishwasher or otherwise endanger their lives. Therefore cut off
the power supply cable and make the door closing device
unusable to prevent children from being trapped inside.
G The water in your dishwasher is not for drinking. Detergent
residues may still be present in your machine. Keep
children well away from your dishwasher when the door is
open.
For the disposing of the appliance please take it to a recycling
centre or to your dealer who may, for a small contribution to
the costs, dispose it for you.
G Keep all detergents in a safe place out of children's reach.
Your dishwasher in day-to-day use
G Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
Economical and
ecological dishwashing
G Ensure that the water softener is correctly adjusted.
G Under no circumstances should you open the door whilst
the appliance is in operation, especially during the washing
phase, hot water may escape. However, if the door is
opened, a safety device ensures that the machine stops.
G Do not pre-wash under running water.
G Select the wash programme to suit the nature and degree of
G Only use products (detergent, salt and rinse aid) specifically
the soiling on the dishes.
designed for use in dishwashers.
G Do not use more detergent, dishwasher salt and rinse aid
than is recommended in these operating instructions and by
the manufacturer of the respective product.
G Long bladed knives stored in an upright position are a
potential hazard.
G Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
G Ensure that the door of the dishwasher is always closed
when it is not being loaded or unloaded. In this way you will
avoid anybody tripping over the open door and hurting
themselves.
G When finishing loading or unloading close the door, as an
open door can be a hazard.
G Do not sit or stand on the open door.
G Isolate the appliance from the power supply and turn off the
water supply after use.
G This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical and/or plumbing work required to install
this appliance should be carried out by a qualified
electrician and/or plumber or competent person.
Water supply connections
This dishwasher may be fed with either hot (max. 60°) or cold
water. Nevertheless we advise you a cold water supply.
A hot water supply is not always efficient with very soiled
crockery as it shortens the washing programmes a lot.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
For making the connection itself, the coupling nut fitted to the
machine’s supply hose is designed to screw onto a 3/4" inch
gas thread spout or to a purpose made quick-coupling tap
such as the Press-block.
Fitting under a counter
(kitchen worktop or sink)
The water pressure must be within the limits given in the
"Technical specifications". Your local Water Authority will
advise you on the average mains pressure in your area.
By removing the machine’s worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
The water inlet hose must not be kinked, crushed, or entangled
when it is being connected up.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation by
means of the locknut. The locknut must be correctly fitted
to avoid water leaks. (Attention! NOT all models of
dishwashers have fill and drain hoses provided with locknut. In
this case, this kind of facility is not possible).
If the machine is connected to new pipes or pipes which have
not been used for a long time, you should run the water for a
few minutes before connecting the inlet hose.
450
Do not use, for connection, old hoses which have been
used in another appliance.
IN04
The dishwasher is fitted with safety devices that prevent the
wash water returning into the drinking water system and
comply with the applicable plumbing regulations.
Proceed as follows:
Remove the machine’s worktop by unscrewing the two rear
retaining screws, pull the worktop from the back of the
machine and slide out the front slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
During all operations that involve accessibility to internal
components the dishwasher has to be unplugged.
Be sure that once the appliance has been installed, it is easily
accessible for the consumer service department.
If the dishwasher is later used as a free-standing appliance,
the original worktop must be re-mounted.
The plinth on free-standing appliances is not adjustable.
Security system
Inlet hose
The
inlet hose has a high pressure resistance.
It can sustain pressures up to 6000 kPa (60 bar), 6 times a
normal hose.
As a further safeness, the inlet hose is protected with a
sheathing against eventual damages.
Levelling
In case of breakage of the inner hose, the water that is in the
hose will become dark, this is visible across the special
transparent sheathing.
Good levelling is essential for correct closure and sealing of
the door.
When the appliance is correctly levelled, the door will not catch
on either side of the cabinet.
In this case turn off the water tap and call the Service Force
Centre.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
The
inlet hose is fitted with a safety device to
prevent inadvertent loosening.
To detach the hose, press the lever (B) and turn the retaining
ring (A) anticlockwise.
A
B
CA14
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Water outlet hose connection
Electrical connection
The end of the drain hose can be connected in the following
ways:
Information concerning the electrical connection is given on the
rating plate on the edge of the dishwasher’s door.
1. To the sink outlet spigot, securing it to the underside of the
work surface. This will prevent waste water from the sink
running into the machine.
Before plugging the appliance into the wall socket, make sure
that:
1. The mains voltage and current rating at the site of
installation match the nominal voltage and current rating
given on the rating plate.
2. Hooked over the edge of the sink using the special curved
plastic guide (if provided with the machine).
3. To a stand pipe provided with vent-hole, minimum internal
2. The meter, fuses, mains power supply and wall socket can
all take the maximum load required. Make sure that the
socket and plug are compatible without having to use any
type of adaptor. If necessary, have the domestic wiring
system socket replaced.
diameter 4 cm.
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
The drain hose can face either to the right or left of the
dishwasher
To isolate the dishwasher from mains, remove the mains plug.
Important!
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
The plug must still be accessible after the appliance
has been installed.
The sink plug must not be in place when the machine is
draining as this could cause the water to syphon back into the
machine.
In case that the electrical cable has to be replaced,
please contact your local Service Force Centre.
The appliance should not be connected to the
electrical supply by means of an extension cable.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
Safety standards require the appliance to be
earthed.
The manufacture accepts no liability for failure to
observe the above safety precautions.
CS18
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
Attention!
Our appliances are supplied with a security device to protect
against the return of dirty water back into the machine.
If the spigot of your sink has a "no return valve" incorporated
this can prevent the correct draining of your dishwasher.
We advise you therefore to remove it.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1. Upper basket stop
2. Water hardness dial
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
12. Worktop
IN154
The control panel
On/Off indicator light
Function buttons
Indicator lights
Delay start button
On/Off button
Door handle
Programme selection
buttons
3 in 1 button
Function buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
Programme selection buttons: the selection of a
washing programme occurs by pressing one of these buttons
(see "Washing programmes" chart).
- the setting of the water softener,
- activation/deactivation of the rinse aid dispenser,
- the cancelling of a programme in progress.
"Delay start" button: this option allows the start of the
programme to be delayed by 3, 6 or 9 hours.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicator lights
Activation/deactivation of the rinse aid
dispenser
(The dishwasher must be switched off)
Phase indicator lights: have the following meanings:
Wash: illuminates when the washing and rinsing
phases are running.
With the activation of the rinse aid dispenser also the
rinse aid indicator light on the control panel is
automatically activated.
Drying: illuminates when the drying phase is
running.
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
End of programme: illuminates when the washing
programme has ended.
If a programme button indicator light is on, this means that
a washing programme has been set. The programme must
be cancelled: press simultaneously the function buttons 2
and 3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light) indicating that the set programme has been
cancelled and the machine is now in setting mode.
It also has added functions of visual signalling as:
- the setting of the water softener,
- activation/deactivation of the rinse aid dispenser,
- intervention of an alarm due to the malfunction of
the machine.
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.
2. Press simultaneously function buttons 2 and 3, until the
indicator lights of the function buttons 1, 2 and 3 start
flashing.
As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.
3. Press the function button 2, the indicator lights of function
buttons 1 and 3 turn off while the indicator light of the
function button 2 goes on flashing.
Control indicator lights: have the following meanings:
4. To activate the rinse aid dispenser, press the function button
2 again, the indicator light end of programme illuminates,
indicating that the rinse aid dispenser has been activated.
Salt refilling indicator light: illuminates when the salt
has run out.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
Rinse aid refilling indicator light: illuminates when
the rinse aid has run out.
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
To deactivate the rinse aid dispenser follow the above
instructions until the indicator light end of programme turns
off.
"3 in 1" button: this appliance is equipped with the 3 in 1
function, that allows the use of the "3 in 1" combi detergent
tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the 3 in 1 function before the setting of a washing
programme.
Once selected this option (button indicator light illuminated ) it
will remain active also for the following washing programmes,
to deactivate the function, press the button (button indicator
light off).
With the use of 3 in 1 combi detergent tablets, the cycle
durations given in the "Washing programmes" chart may
change.
NOTE: Once the programme is running, the 3 in 1 function can
NO longer be changed. If you want to exclude the 3 in 1
function you have to cancel the programme setting and then
deactivate the 3 in 1 function by pressing the 3 in 1 button.
In this case you have to set a washing programme again (and
eventual options). To cancel the running programme see
"Starting a washing programme" ("To cancel a washing
programme in progress").
NOTE: in case that drying results are not satisfactory it is
possible to activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can be
carried out only with the 3 in 1 function active.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Prior to using for the first time
Before using your dishwasher for the first time:
b) Setting electronically
(The dishwasher must be switched off)
1. Ensure that the electrical and water connections comply
with the installation instructions
NOTE: the electronic setting of the water softener is
possible ONLY with the 3 in 1 function deactivated.
2. Remove all packaging from inside the appliance
3. Set the water softener
The dishwasher is factory set at level 5.
4. Pour 1 litre of water inside the salt container and then fill
with dishwasher salt
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
5. Fill the rinse aid dispenser
If a programme button indicator light is on, this means that
a washing programme has been set. The programme must
be cancelled: press simultaneously the function buttons 2
and 3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light and eventually salt and rinse aid indicator
lights) indicating that the set programme has been
cancelled and the machine is now in setting mode.
The water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these minerals and salts, the harder
your water is.
2. Press simultaneously function buttons 2 and 3, until the
indicator lights of the function buttons 1, 2 and 3 start
flashing.
Water hardness is measured in equivalent scales, German
degrees (°dH), French degrees (°TH) and mmol/l (millimol per
litre - international unit for the hardness of water).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
3. Press the function button 1, the indicator lights of function
buttons 2 and 3 turn off while the indicator light of the
button 1 goes on flashing, at the same time the indicator
light end of programme starts to flash.
The water softener must be set in both ways: manually, using
the water hardness dial and electronically, using the function
push buttons on the control panel.
The current level is indicated by the number of flashes of
the indicator light end of programme (see chart).
Example: 5 flashes = level 5
a) Setting manually
4. To change the level, press button 1. Each time the button is
pressed the level changes. (For the selection of the new
level see the chart).
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to position 1 or 2 (see table).
4. Replace the lower basket.
Examples:
if the current level is 5, by pressing button 1 once, level 6 is
selected.
The dishwasher is factory set
at position 2.
if the current level is 10, by pressing button 1 once, level 1
is selected.
After about 5 seconds the indicator light of the function
button1 starts flashing, indcating the new selected level.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
AA07
Adjusting the water hardness
setting
electronically
Number of flashes of the
"end of programme"
indicator light
Use
of salt
Water hardness
°dH
°TH
mmol/l
Range
manually
2
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
91 - 125 9,0 - 12,5
VI
VI
VI
VI
VI
III
III
II
level 10
level 9
level 8
level 7
level 6
level 5
level 4
level 3
level 2
level 1
10
9
8
7
6
5
4
3
2
1
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
7,6- 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
2
2
2
2
2
1
1
1
1
I/II
I
< 4
< 7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with dishwasher salt
Rinse aid
Only use salt specifically designed for use in
dishwashers.
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
The dispenser, which is positioned inside the door, holds about
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Only fill with salt just before starting one of the complete
washing programmes.
This will prevent any grains of salt or salty water, which
may have been spilt, remaining on the bottom of the
machine for any period of time, which may cause
corrosion.
Filling with rinse aid
1. Open the container by pressing the release button (A).
2. Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
To fill:
1. Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3. Using the funnel provided,
SALE
pour in the salt until the
container is full.
T
ZOUT
SAL
SALZ
SEL
4. Replace the cap making
sure that there is no trace
of salt on the screw
Ensure that the lid is closed after every refill.
thread or on the gasket.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
5. Replace on the cap tightly
turning it clockwise until it
stops with a click.
SR14
Only use branded rinse aid for dishwashers. Never fill the
rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
The salt container will require topping up periodically. You are
reminded of this by the salt indicator light on the control panel
which comes on when the salt has finished.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer. The function of the machine is not
affected.
The dose is factory set in
position 4.
Do not worry if water over flows from the unit when filling with
salt, this is quite normal.
Increase the dose if there are
drops of water or lime spots
on the dishes after washing.
Reduce it if there are sticky
whitish streaks on the dishes
or a bluish film on glassware
or knife blades.
Top up the rinse aid when the indicator light on the control
panel illuminates.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
In daily use
G Check if it’s necessary to refill with dishwasher salt or rinse
Loading cutlery and dishes
Sponges, household cloths and any object that can
absorb water may not be washed in the dishwasher.
aid
G Load cutlery and dishes into the dishwasher.
G Fill with dishwasher detergent .
G Before loading the dishes, you should:
- Remove large left-overs.
G Select a wash programme suitable for the cutlery and
dishes.
- Soften remnants of burnt food in pans
G Start the wash programme.
G When loading the dishes and cutlery, please note:
- Dishes and cutlery must not impede the rotation of the
spray arms .
- Load hollow items such as cups, glasses, pans, etc. with
the opening downwards so that water cannot collect in the
container or a deep base.
- Dishes and items of cutlery must not lie inside one
another, or cover each other.
- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.
G Plastic items and pans with teflon have a tendency to
retain water drops; these items will not dry as well as
porcelain and steel items.
For washing in the dishwasher the following cutlery/dishes
are not suitable:
are of limited suitability:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Only wash stoneware in the dishwasher if it is specifically
marked as being dishwasher-safe by the manufacturer.
- Plastic items that are not heat resistant
- Glazed patterns may fade if machine washed frequently
- Older cutlery with glued parts that is not
temperature resistant
- Silver and aluminium parts have a tendency to discolour
during washing. Residues, e.g. egg white, egg yolk and
mustard often cause discolouring and staining on silver.
Therefore always clean left-overs from silver immediately, if
it is not to be washed straight after use.
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Some types of glass can become dull after a large number
of washes
- Steel items subject to rusting
- Wooden platters
- Items made from synthetic fibres
Open the door and slide out the baskets to load the dishes.
The two rows of prongs on the lower basket can be easily
lowered to allow you to load pots, pans and bowls.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the spray arms can turn
freely.
UI92
UI61
UI24
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The cutlery basket
Adjusting the height of the upper basket
Long bladed knives stored in an upright position are a
potential hazard.
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Maximum height of the dishes in
upper basket
lower basket
With upper basket raised
With upper basket lowered
20 cm
24 cm
31 cm
27 cm
Forks and spoons should be placed in the removable cutlery
basket with the handles facing downwards and the knives with
their handles facing upwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
To move to the higher position proceed as
follows:
Mix spoons with other cutlery to prevent them from sticking
together.
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
For best results we
2. Refit the basket in the higher position and replace the stops
recommend you to use the
cutlery grid provided (if the
size and dimensions of the
cutlery allow it).
(A) in their original position.
When the basket is in the
higher position you will not
be able to use the cup
rack(s).
UI76
RC01
After loading your machine always close the door, as an
open door can be a hazard.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
For taller items, the cup
racks can be folded upwards.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
Before closing the door, ensure that the spray arms can
rotate freely.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
Only use detergents specifically designed for use in
dishwashers.
Using no more then the correct amount of detergent
contributes to reducing pollution.
Please observe the manufacturer’s dosing and storage
recommendations as stated on the detergent packaging.
Fill with detergent
1. If the lid is closed: press release button (1). The lid springs
open.
2. Fill the detergent dispenser (2) with detergent.
The marking indicates the dosing levels:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent
DE19
DE22
3. All programmes with prewash need an additional detergent
dose (5/10 g) that must be placed in the prewash detergent
chamber (3). This detergent will take effect during the
prewash phase.
4. Close the lid and press until it locks in place.
The products
In order to obtain a good wash, it is necessary to use detergents
specially designed for dishwashers.
To ensure that your dishwasher functions perfectly, Zanussi
recommends using Calgonit System, a unique and complete
product, tested by millions of householders.
Calgonit System includes Calgonit detergent, rinse aid, salt,
machine detergent and Citro-Fresh.
It is able to fulfil the main requirements for clearing both the
crockery and the machine itself.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Different kinds of detergent
Detergent tablets
Use of "3 in 1" combi detergents
General advice
These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.
Detergent tablets of different brands dissolve at different
speeds. For this reason some detergent tablets cannot
dissolve and develop their full cleaning power during short
programmes. Therefore please use long programmes when
using detergent tablets, to ensure the complete removal of
detergent residuals.
Do not place the tablets in the tub or in the cutlery basket
as this will result in poorer wash results. The tablets
should be placed in the detergent dispenser.
1. Before using these products you should first check that
the water hardness in your supply is compatible with
the use of these products as per the detergent
manufacturers (on the product packaging).
2. These products should be strictly used according to the
detergent manufacturers instructions.
3. If you encounter problems when using 3 in 1 products for
the first time then please contact the detergent
manufacturers care line (the telephone number is given on
the product packaging).
Concentrated detergent
Based on their chemical composition, dishwasher detergents
can be split into two basic types:
- conventional, alkaline detergents with caustic components.
- low alkaline concentrated detergents with natural enzymes.
Special advice
When using combination 3 in 1 products select the "3 in
1" function.
The use of 50°C washing programmes in conjunction with
concentrated detergents reduces pollution and is good for your
dishes; these wash programmes are specially matched to the
dirt-dissolving properties of the enzymes in the concentrated
detergent. For this reason 50°C wash programmes in which
concentrated detergents are used can achieve the same
results that can otherwise only be achieved using 65°C
programmes.
If you decide to turn back to the use of the standard detergent
system we advise that you:
G Refill both the salt container and rinse aid dispenser.
G Switch the water hardness setting to the highest possible
position and run from 1 to 3 normal washing programmes
without a load.
G Readjust the water hardness setting again according to the
hardness of the water in your area.
Combi detergents
If you are using dishwasher detergent that includes the rinse
aid function, this must be placed in the detergent compartment.
In this case the rinse aid dispenser must be empty, in order to
avoid a double dosage.
If in the rinse aid dispenser there is still rinse aid you must wait
until it has finished before using these kind of detergents.
The rinse aid indicator light will always remain illuminated
when the machine is switched on (not all dishwasher models
are foreseen with rinse aid indicator light).
Special salt for dishwasher must still be used.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Programme
Degree of soil
and
Press the
programme
button
Cycle description
(3) Consumption values
Energy
consumption
(in kWh)
Water
consumption
(in litres)
Programme
duration
(in minutes)
type of load
Hot prewash
Main wash up to 70°C
2 warm rinses
1 hot rinse
Heavy soil.
Crockery, cutlery, pots
and pans
Intensive 70°C
70 - 80
1,5 - 1,7
18 - 20
70°
Drying
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying
Normal soil.
Crockery and cutlery
Normal 65°C
(1) Quick 60°C
(2) Eco 50°C
85 - 95
25 - 30
1,1 - 1,3
0,7 - 0,8
15 - 17
7 - 8
65°
Fresh soil.
Crockery and cutlery
Main wash up to 60°C
1 hot rinse
60° A 30I
Cold prewash
Main wash up to 50°C
1 cold rinse
Normal soil.
Crockery and cutlery
ECO
50°
160 - 170
0,75 - 0,8
12 - 13
1 hot rinse
Drying
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).
This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast
and dinner crockery and cutlery.
(2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with
enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be
obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of
washing and drying have been extended.
(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by
the variations of the power supply.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting a washing programme
To cancel a washing programme in
progress
To cancel a washing programme in progress, press
simultaneously the function buttons 2 and 3 until all the
indicator lights will turn off (except for the On/Off indicator
light and eventually the rinse aid and salt indicator lights)
indicating that the running programme has been cancelled.
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
(If a new washing programme will be selected, check that
there is detergent in the detergent dispenser).
3. Close the dishwasher door
4. Press the On/Off button
7. Cancelling the "delay start" in
progress
The On/Off indicator light will come on.
It is possible to cancel a countdown in progress or before
it starts, simply pressing the delay start button until the
indicator lights corresponding to the delay start hours (3h,
6h or 9h) turn off.
5. Setting and starting the programme
Press the button corresponding to the required programme
(see "Washing programmes" chart).
In this case the selected washing programme will start
automatically after a 3 seconds.
The indicator light corresponding to the programme and
the phase indicator lights foreseen for that programme will
start blinking.
After about 3 seconds from the last pressure of a button
the programme starts automatically.
Once the programme has started the phase indicator lights
will turn off except for the phase under way.
8 . End of the washing programme
The dishwasher will automatically stop and the end of
programme phase indicator light will illuminate.
The indicator light of the programme just ended will
remain on.
If you want to set the delay start of a
washing programme
Set the delay start before selecting a washing
programme.
Switch off the dishwasher by pressing the On/Off button,
the On/Off indicator light turns off.
Open the dishwasher door, leave it ajar and wait a few
minutes before removing the dishes; in this way they will
be cooler and the drying will be improved.
Press the delay start button until the indicator light
corresponding to the chosen hours flashes (3h, 6h or 9h)
Press the button corresponding to the required programme
(see "Washing programmes" chart).
After about 3 seconds from the last pressure of a button
the countdown starts automatically.
The countdown will decrease with steps of 3 hours.
The opening of the door will not modify or interrupt the
countdown.
9. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Once the delay start has elapsed the programme will
start automatically.
Note: it is possible to select a washing programme and
the delay start also with the door slightly opened.
In this case the start of the programme or of the
countdown will occur after about 3 seconds from the
closure of the door.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
6. To interrupt or cancel a washing
programme in progress
Interrupt or cancel a washing programme in progress
ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
To interrupt a washing programme in
progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point at which it was interrupted.
b) Press the On/Off button (in this case all the indicator
lights turn off). Press the On/Off push button again; the
programme will start from the point at which it was
interrupted.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
Attention!
Under no circumstances may the dishwasher be used without
filters.
Incorrect repositioning and fitting of the filters will produce
poor washing results.
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
We recommend every 3 months to run a 65°C wash
programme without dishes using detergent.
NEVER try to remove the
upper spray arm.
If residues of soil have
clogged the holes in the
upper spray arm, remove
them with a toothpick.
Cleaning the filters
The filters must be checked and cleaned from time to time.
Dirty filters will degrade the washing result.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a coarse filter (A),
a microfilter (B) and a flat filter (C).
MA40
Unlock the filter system using the handle on the microfilter,
and remove.
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Leave the door ajar to prevent the formation of any
unpleasant smells.
3. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it.
1
4
3. Turn the handle about / a turn anticlockwise and remove.
Moving the machine
If you have to move the machine (moving house etc....):
MA39
1. Unplug it.
2. Turn the water tap off.
4. Take hold of the coarse filter (A) by the handle with
the hole and remove from the microfilter (B).
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (C) from the base of the washing
compartment and clean both faces thoroughly.
7. Put the flat filter (C) back in the base of the washing
compartment.
8. Place the coarse filter (A) in the microfilter (B) and press
together.
9. Put the filter combination in place and lock by turning the
handle clockwise to the stop. During this process ensure
that the flat filter does not protrude above the base of the
washing compartment.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, when...
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions
given here, without calling out an engineer.
...a flashing fault code appears
The dishwasher will not start or stops during operation.
The intervention of an alarm is indicated by:
- continuous flashing of the indicator light of the running programme,
- a combination of flashing and pauses of the end of programme indicator light (as described in the chart).
Open the door and carry out the following suggested corrective actions.
Fault code / malfunction
Possible cause
Solutions
- continuous flashing of the
indicator light of the running
programme
The water tap is blocked or furred with
limescale.
Clean the water tap.
The water tap is turned off.
Turn the water tap on.
- 1 flash of the "end of
programme" indicator light
The filter (where present) in the threaded hose
fitting at the water inlet valve is blocked.
Clean the filter in the threaded hose
fitting.
The machine does not fill with
water.
The water inlet hose has not been correctly laid
or it is bent or squashed.
Check the water inlet hose connection.
- continuous flashing of the
indicator light of the running
programme
The sink spigot is blocked.
Clean out the sink spigot.
The water drain hose has not been correctly laid Check the water drain hose connection.
or it is bent or squashed.
- 2 flashes of the "end of
programme" indicator light
The dishwasher will not drain.
- continuous flashing of the
indicator light of the running
programme
Anti-flood device has activated.
Close the water tap and contact the
Service Force Centre.
- 3 flashes of the "end of
programme" indicator light
Once the checks have been carried out, close the door and press the button of the programme that was running before the
intervention of the alarm, the programme will continue from the point at which it was interrupted. If the fault code reappears contact
the Service Force Centre.
For other combinations of fault codes not described in the above chart will appear, please contact your Service Force Centre.
...there are problems when operating the dishwasher
Malfunction
Possible cause
Solutions
The dishwasher door has not been properly
closed.
Close the door.
The main plug is not plugged in.
Insert the mains plug.
Replace the fuse.
The programme does not start
The fuse has blown in the household fuse box.
If dishes are to be washed immediately,
cancel the delay start.
For dishwasher models with delay start
option:
Delay start has been selected.
There is a whistling noise during
washing
The whistling is not a cause for concern.
Use a different brand of detergent.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
...the wash results are not satisfactory
The dishes are not clean
G The wrong washing programme has been selected.
G The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
G The spray arms do not rotate freely due to wrong arrangement of the load.
G The filters in the base of the washing compartment are dirty or incorrectly positioned.
G Too little or no detergent has been used.
G Where there are limescale deposits on the dishes; the salt container is empty or the wrong level of the water softener has been
selected.
G The drain hose connection is not correct.
G The salt container cap is not properly closed.
The dishes are wet and dull
G Rinse aid was not used.
G The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on glasses and dishes
G Decrease rinse aid dosing.
Water drops have dried onto glasses and dishes
G Increase rinse aid dosing.
G The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.
If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model (Mod.), product
number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on
the side of the dishwasher door (see picture).
So that you always have these numbers at hand, we
recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . .
RA08
Service and spare parts
This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself.
Repairs carried out by inexperienced persons may cause injury
or serious malfunctioning. Contact your local Service Force
Centre.
Always insist on genuine spare parts.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing
programmes" chart).
Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and
rinse aid respectively and using the test programme (see "Washing programmes" chart).
Load:
9 standard place settings
position 4 (Type III)
Rinse aid setting:
Detergent dosage :
5 g + 20 g (Type B)
Arrangement upper basket
without smaller bowl
Arrangement upper basket
Arrangement lower basket
with smaller bowl
and salad-bowl
and salad-bowl
(glass holder in higher position)
(glass holder in higher position)
Arrangement cutlery basket
Cup racks: position A
19
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The World’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such
as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the
world.
Subject to change without notice
152957 01/0
01/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|