UC
DVX-C310
(DVR-C310+NX-SW300+NX-F300+NX-C300+NX-S300)
DVX-C310SW
(DVR-C310+NX-SW300)
OWNER’S MANUAL
MODE D’EMPLOI
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
•
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
8
9
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT
Please record the serial number of this DVD
receiver in the space below.
10 Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
MODEL:
manufacturer.
Serial No.:
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
The serial number is located on the rear of this
DVD receiver.
Retain this Owner’s Manual in a safe place for
future reference.
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for a long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15 Be sure to allow spaces of at least 10 cm above, behind and
on both sides of DVR-C310, and at least 1m above, 30cm
behind and on both sides of NX-SW300.
16 Do not place the following objects on this unit:
A vessel with water in it.
If the vessel falls by vibrations and water spills, it may cause
damage to the unit, and/or you may get an electric shock.
Apparatus shall not be exposed to dripping or splashing.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers)
1
2
3
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could
void your FCC authorization to use this product in the USA.
NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning
the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
■ We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged
exposure from excessive volume levels.
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
DANGER
This unit emits visible laser radiation when open. Avoid direct
eye exposure to beam. When this unit is plugged into a wall
outlet, do not place your eyes close to the opening of the disc
tray and other openings or look inside.
SÉCURITÉ LASER
L'appareil utilise un laser. En raison des risques de blessure
des yeux, le retrait du couvercle ou les réparations de
l'appareil devront être confiés exclusivement à un
technicien d'entretien qualifié.
DANGER
Risque d'exposition au laser en cas d'ouverture. Eviter
toute exposition au faisceau. Lorsque cet appareil est
branché à la prise de courant, ne pas approcher les yeux de
l'ouverture du plateau changeur et des autres ouvertures
pour regarder à l'intérieur.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry, clean
place with at least 10 cm on the top, 10 cm on the left and
right, and 10 cm at the back of DVR-C310 and at least 1 m
above, 30 cm behind and on both sides of NX-SW300 for
adequate ventilation. — away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from
cold to hot, nor locate this unit in an environment with high
humidity (i.e., a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit in a location where foreign objects
may fall onto this unit or where this unit may be exposed to
liquid dripping or splashing. On the top of this unit, do not
place:
17 Before moving this unit, press STANDBY/ON to set the
unit in standby mode, then disconnect the AC power plug
from the wall outlet.
18 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave the unit alone.
19 When using the unit for a long time, the unit may become
warm. Turn the power off, then leave the unit alone for
cooling.
20 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
3
4
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
5
–Other components, as they may cause damage and/or
discoloration on the surface of this unit.
–Burning objects (i.e., candles), as they may cause fire,
damage to this unit, and/or personal injury.
–Containers with liquid in them, as they may fall, spilling
the liquid and causing an electrical shock to the user and/or
damage to this unit.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if this unit itself is turned off. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
6
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use excessive force on switches, knobs and/or cords.
WARNING
7
8
9
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
CAUTION
10 When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
Danger of explosion if battery is incorrectly replaced.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Replace only with the same or equivalent type.
12 Use only the voltage specified on this unit. Using this unit
with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than as
specified.
Be sure to place this unit on the level surface.
If you do not place this unit on the level surface,
PLAYXCHANGE will not function correctly, and may damage
the disc(s) and/or this unit itself.
LASER
Type
Wave length
Semiconductor laser GaAlAs
650 nm (DVD)
784 nm (VCD/CD)
7 mW (DVD/VCD/CD)
60 degrees
13 To prevent damage by lightning, keep the power cord out
and outdoor antennas disconnected from a wall outlet or the
unit during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reason.
15 When not planning to use this unit for long periods of time
(i.e., vacation), disconnect the AC power plug from the wall
outlet.
Output Power
Beam divergence
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
16 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. INTRODUCTION
Using the OSD menu .....................................29
General setup .................................................30
Audio setup ....................................................32
INTRODUCTION .........................................2
Main unit ......................................................... 3
Supplied accessories ........................................ 3
FUNCTIONAL OVERVIEW .........................4
Front panel (DVR-C310) ................................ 4
2. PREPARATION
Placing the speakers ........................................ 9
Presetting stations ..........................................39
Activating XM Satellite Radio ......................43
Selecting the XM Satellite Radio
CONNECTION ...........................................12
Connecting a YAMAHA
search mode ...............................................44
Setting the XM Satellite Radio
preset channels ...........................................45
Displaying the XM Satellite Radio
information ................................................45
iPod universal dock ................................... 15
Connecting a digital audio component .......... 16
Connecting a portable audio player ............... 16
Connecting the FM/AM antennas ................. 17
GETTING STARTED .................................18
Inserting batteries into the remote control .... 18
Using the remote control ............................... 18
Turning on the power .................................... 19
5. ADVANCED OPERATION
SOUND CONTROLS ................................ 46
Selecting surround sound ..............................46
Selecting digital sound effects .......................46
Adjusting the treble/bass level .......................46
Adjusting the volume ....................................46
Muting the sound ...........................................46
REMOTE CONTROL FEATURES ............ 47
Setting remote control codes .........................47
3. BASIC OPERATION
DISC OPERATION ....................................21
6. ADDITIONAL INFORMATION
TROUBLESHOOTING .............................. 49
SPECIFICATIONS .................................... 54
Special VCD & SVCD features .................... 24
Playing MP3/JPEG/DivX® WMA discs ...... 25
Playing Super Audio CDs ............................. 25
DVD-Audio Features .................................... 26
Playing JPEG/Kodak picture CDs ................ 26
1 En
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
INTRODUCTION
Thank you for purchasing this unit. This Owner’s Manual
explains the basic operation of this unit. This manual is
printed prior to production. Design and specifications are
subject to change in part as a result of improvements, etc.
In case of differences between the manual and the product,
the product has priority.
Region codes
DVD discs must be labeled ALL regions or
Region 1 (U.S.A. and Canada models) in order
to play on this DVD receiver. You cannot play
discs labeled for other regions.
ALL
1
Features
Notes about discs
–
This DVD receiver is designed for use with the following discs:
Super Audio CD (SA-CD), DVD-Video, Video CD, Super
Video CD, Audio CD, CD-R, CD-RW, DVD-Audio, DVD+RW,
DVD+R, DVD-R, DVD-RW and DVD-RW (VR format).
Active Servo Processing Subwoofer System with built-in power
amplifier.
This subwoofer system (NX-SW300) employes Advanced
YAMAHA Active Servo Technology which YAMAHA has
developed for reproducing higher quality super-bass sound. This
super-bass sound adds a more realistic, theater-in-the-home effect
to your stereo system.
PLAYXCHANGE
Capable of changing discs without interrupting current disc
playback.
Pressing PLAYXCHANGE on the front panel to open the disc
tray and reload or unload discs during playback.
This DVD receiver can play:
–
–
MP3 and picture (Kodak, JPEG) files recorded on CD-R(W)
JPEG/ISO 9660 format (except Progressive JPEG)
Patent information
•
•
Up to a resolution of 3072 x 2048
File name extensions (.jpg) must be used for this DVD
receiver to recognize JPEG files
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, “MLP Lossless” and the double-D symbol are
trademarks of Dolby Laboratories.
–
–
Maximum 30 character display
DivX® disc on CD-R[W]/DVD+R[W]/DVD-R[W]
Notes
–
–
The multiple sessions of CD-R/RW can be played.
Only the single session of DVD+R/RW and DVD-R/RW
can be played.
“DTS” and “DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc.
–
–
CD-R, CD-RW and DVD-RW (VR format) cannot be
played unless finalized.
Some discs cannot be played depending on the recording
conditions, such as the PC environment and application
software. The characteristics and condition of some discs;
materials, scratches, curvature, etc., may result in
playback failure.
“DivX”, “DivX Certified”, and associated logos are trademarks of
DivXNetworks, Inc. and are used under license.
–
Be sure to use only CD-R and CD-RW discs made by
reliable manufacturers.
The XM name and related logos are registered trademarks of XM
Satellite Radio Inc.
–
–
Do not use any non-standard shaped discs (heart-shaped, etc.).
Do not use discs with tape, seals, or paste on their surface.
Doing so may damage this DVD receiver.
Do not use discs affixed with labels printed by a
commercially available label printer.
iPod®
“iPod” is a trademark of Apple Computer, Inc., registered in the
U.S. and other countries.
–
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Cleaning discs
–
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out. Do not wipe in a circler
motion.
–
Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray
intended for analog records.
Disc care
–
Write only on the printed side of a CD-R/CD-RW and
only with a soft felt-tipped pen.
–
Handle the disc by its edge; do not touch the surface.
2 En
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
■ Main unit
■ Supplied accessories
1
FM wire antenna
NATURAL SOUND HOME THEATER SYSTEM DVR-C310
INPUT
VOLUME
DVD receiver
(DVR-C310)
AUDIO/VIDEO
1
2
3
4
5
P
O
R
T
A
B
L
E
PLA
YXCHANGE
DISC
AM loop antenna
Remote control
POWER DIMMER SLEEP POWER
TV
Subwoofer
SCAN
P
A
GE
(NX-SW300)
PROG REPEA
T
A
-
B
SHUFFLE
TOP MENU/RETURN
ON SCREEN
CH
+
DISPLAY
ENTER
CAT
CA
T
OK
+
MENU
SRCH
SET UP
CH
PRESET
DISC
SKIP
SUBTITLE
AUDIO ANGLE ZOOM
TRE
TVVOL TV CH
VOL
BASS
EFFECT SURR
TV
MUTE
DOCK
INPUT
XM
TV
AUX
TUNER DVD/CD
Center speaker*
(NX-C300)
Batteries (x 2)
Video pin cable
Front speakers*
(NX-F300 x 2)
System control cable
Speaker cables*
(5 m x 3)
(15 m x 2)
Surround speakers*
(NX-S300 x 2)
Fasteners (x 2)*
*DVX-C310 only
*DVX-C310 only
3 En
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
■ Front panel (DVR-C310)
1
2
3
4
NATURAL SOUND HOME THEATER SYSTEM DVR-C310
INPUT
VOLUME
AUDIO/VIDEO
4
PORTABLE
1
2
3
5
PLAYXCHANGE
DISC
C
B
A
0
9
8 7 6 5
9 b/a, w/f
1 STANDBY/ON (
)
DVD/CD mode: selects the previous/next track or
chapter. Press and hold to fast forward or fast reverse.
TUNER mode: selects the preset number.
Turns on this DVD receiver, or sets it to the standby
mode.
While this DVD receiver is in the standby mode, it
consumes a small amount of power.
0 PORTABLE jack
Connects a portable audio player.
2 Disc tray
Loads up to 5 discs in the disc tray.
A Remote control sensor
Receives infrared signal from the remote control.
3 VOLUME
Adjusts the volume level.
B Front panel display
Shows information about the operational status of this
DVD receiver.
MULTI
Lights up when you play a multi-channel audio
source.
DOWNMIX
Lights up when you play discs that allow down mixing
of multi-channel audio sources.
It does not light up for discs that prohibit down
mixing, even if you play a multi-channel audio source.
4 INPUT
Selects the input source.
5
Opens and closes the disc tray.
6 PLAYXCHANGE
Reloads or unloads discs without interrupting current
disc playback.
7 s
DVD/CD mode: stops playback.
TUNER mode: deletes a preset station if held more
than two seconds, or cancels the preset installation in
Plug and Play (see page 39).
C DISC (1, 2, 3, 4, 5) / LEDs
Selects and directly plays back the preferred disc.
Each LED lights up in green when this DVD receiver
recognizes that the corresponding disc has been
loaded.
8 h/e
DVD/CD mode: starts or pauses playback.
TUNER mode: starts preset installation in Plug and
Play (see page 39).
4 En
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
■ Rear panel (DVR-C310)
1
1 2
3
4
5
HDMI
FM
XM
DOCK
PR
Y
VIDEO
75
UNBAL.
SYSTEM
CONNECTOR
GND
AM
PCM/DTS
qDIGITAL
PB
COAXIAL COMPONENT S VIDEO
DIGITAL IN VIDEO OUT (DVD ONLY)
TV IN AUX IN LINE OUT
TO NX-SW300
ANTENNA
D
C
B A
0
7
6
8 COMPONENT VIDEO OUT jacks
(see page 12).
Connect the FM antenna.
2 HDMI jack
9 COAXIAL input jack
Connect to an HDMI compatible component
(see page 13).
Connect to the digital out jack on a digital audio
component (see page 16).
3 XM jack
Connect an XM Passport System (see page 41).
Connect to the subwoofer (see page 11).
4 DOCK terminal
A LINE OUT jacks
Connect a YAMAHA iPod universal dock
(see page 15).
(see page 14).
B AUX IN jacks
Connect to a standard AC outlet.
cassette deck (see page 14).
6 VIDEO output jack
page 12).
C TV IN jacks
Connect to the corresponding audio output jacks of
your TV (see page 12).
7 S-VIDEO output jack
Connect to the S-video jack of your TV or VCR (see
page 12, and 14).
D GND and AM ANT terminals
Connect the AM loop antenna (see page 17).
5 En
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
1 POWER (TV)
■ Remote control
Turns on the TV, or sets it to the standby mode.
(For DVR-C310)
2 DIMMER
Selects different levels of brightness for the display
panel.
1
H
I
POWER DIMMER SLEEP POWER
TV
3 Numeric keypad (0 – 9)
2
Enters a track/title number of the disc.
Enters a number of a preset radio station.
J
3
4
4 REPEAT
SCAN PAGE
K
L
Selects various repeat modes.
PROG REPEAT A - B SHUFFLE
5
6
5 PROG
TOP MENU/RETURN
ON SCREEN
CH +
M
N
DVD/CD mode: starts programming.
TUNER mode: starts automatic/manual preset
programming if held for more than two seconds.
DISPLAY
ENTER
CAT
CAT
OK
7
+
6 TOP MENU/RETURN
MENU
SRCH
SET UP
O
Returns to the previous menu.
Displays the top-level disc menu (if available).
CH
8
9
P
Q
PRESET
7 Cursors (
TUNER mode: press to tune into a station or
press to starts automatic tuning. When this
/
/
/
)
DISC
SKIP
0
A
B
C
D
R
S
t
U
V
SUBTITLE AUDIO ANGLE ZOOM
/
TRE
/
TVVOL TV CH
VOL
DVD receiver is in the XM Satellite Radio mode, see
page 42.
BASS
EFFECT SURR
E
F
G
W
X
TV
MUTE
DOCK
INPUT
ENTER (OK)
XM
Confirms a selection.
TV
AUX
TUNER DVD/CD
8 MENU
Accesses the menu of a disc. During playback, returns
to the main menu.
For VCD version 2.0 only:
Switches PBC (playback control) on or off.
9 s
DVD/CD mode: stops playback. Holding down the
button opens and closes the disc tray.
TUNER mode: deletes a preset station if held more
than two seconds, or cancels the preset installation in
Plug and Play (see page 39).
Note
For details on how to use the remote control, see page 18.
0 u PRESET d(b/a)
DVD/CD mode: selects the previous/next track or
chapter. Press and hold to fast forward or fast reverse.
TUNER mode: selects the preset number.
A SUBTITLE
Selects a subtitle language.
6 En
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
B AUDIO
Selects an audio language (DVD) or an audio channel
Q e
DVD/CD mode: pauses playback.
1
(VCD).
R DISC SKIP
C TV CH (+ / –)
Selects another disc.
Switches the TV channel.
S ZOOM
D TV VOL (+ / –)
Enlarges the video image.
Adjusts the TV volume.
T ANGLE
E TV INPUT
Selects a DVD disc camera angle (if available).
Switches the TV input.
U TRE/BASS
F EFFECT
Selects the TREBLE (high tone) or BASS (low tone)
sound mode.
Selects a sound effect.
Use the VOLUME control to change the tone level.
G Input selection buttons
V VOL (+ / –)
Select the input source.
TV: switches to TV input source.
Adjusts the volume level.
AUX: switches to AUX ANALOG, AUX DIGITAL or
AUX FRONT input source.
TUNER: switches to TUNER/FM, TUNER/AM or
XM RADIO input source.
W MUTE
Mutes the sound. Press again to restore the audio
output to the previous volume level.
DVD/CD: switches to DVD/CD or iPod input source.
X SURR
Switches to multi-channel surround mode or stereo
mode.
H POWER (
)
Turns on this DVD receiver, or sets it to the standby
mode.
While this DVD receiver is in the standby mode, it
consumes a small amount of power.
I SLEEP
Sets the sleep timer.
J SCAN
Scans each track/chapter on the disc.
K PAGE
Turns the pages of DVD-Audio still pictures.
L REPEAT A-B
Repeats a specific section on a disc.
M SHUFFLE
Plays tracks in random order.
N ON SCREEN/DISPLAY
Accesses or exits from the OSD (on screen display)
menu of this DVD receiver.
O SET UP
Accesses or exits from the setup menu of this DVD
receiver.
P h
DVD/CD mode: starts playback.
TUNER mode: starts preset installation in Plug and
Play (see page 39).
7 En
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SETUP
SPEAKER SETUP
■ Roles and layout of the speakers
To enjoy quality sounds you need to place the speakers in their appropriate positions and install them correctly.The
following shows the recommended layout of the speakers. For the best possible surround sound, all of the speakers
(except the subwoofer) should be placed at the same distance from the listening position.
DVD receiver
2 Center speaker
Front
speaker (L)
Front
speaker (R)
1
1
Subwoofer
4
3
Surround
speaker (L)
3
Surround
speaker (R)
1 Front Speakers (L, R)
Place the front left/right speakers on both sides of your TV at equal distances.
Main roles: Produces front channel (stereo) sounds and effect sounds.
2 Center Speaker
Place the center speaker on top of the TV or inside the TV rack so that the speaker and TV are aligned vertically.
Main role: Produces sounds oriented toward the center of the screen such as dialogues or vocal sounds.
3 Surround Speakers (L, R)
Place the surround left/right speakers behind the listening position.
Main roles: Produces surround sounds and effect sounds.
4 Subwoofer
Place the subwoofer near a front speaker and turn it slightly toward the center of the room to reduce wall reflections.
Main roles: Produces bass sounds and low frequency (LFE) sounds contained in Dolby Digital or DTS.
Notes
–
–
–
To avoid magnetic interference, do not position the front speakers too close to your TV.
Allow adequate ventilation around the DVD receiver and subwoofer.
Bass sounds produced by the subwoofer may be heard differently depending on the listening position and subwoofer location.
To enjoy desired sounds, try to change the location of the subwoofer according to the listening position.
8 En
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SETUP
■ Placing the speakers
Attaching to a wall
Placing the center speaker (NX-C300)
You can attach the speakers to a wall using
commercially available screws (Diameter: 3.5 to 4 mm
(1/8” to 5/32”), Length: 25 mm (1”) or more). Each
speaker requires two screws.
When placing the center speaker on the top of the TV,
use the supplied fasteners to secure the speaker.
2
Screws
(3.5 (1/8”) to 4 (5/32”)
mm dia., commercially
available)
Fastener
20 mm (25/32”)
or more
5 mm
(1/5”)
Peel off
the seal
151 mm
(5-15/16”)
79 mm
(2-3/4”)
1 Peel off the seals on one side of the fasteners and
attach them to the bottom of the center speaker.
–
+
–
+
2 Peel off the seals on the other side of the fasteners and
attach them to the top of the TV.
1 Install two screws in the wall where you want to place
Notes
the speaker.
–
Do not place the speaker on the TV if the top of the TV is
uneven or narrower than the bottom surface of the
speaker. Doing so may cause the speaker to fall. In this
case, place the speaker inside a TV rack or on a level
floor.
2 Hang the speaker on the screws using the holes in the
rear of the speaker.
Notes
–
–
Before attaching the fasteners to the TV, clean the surface
with a dry cloth. A dirty or wet surface may weaken the
adhesive force and cause the speaker to fall.
Do not touch the bonding surfaces of the fasteners after
peeling off the seals. Doing so may weaken the adhesive
force and cause the speaker to fall.
–
To attach a speaker to a wall using screws, the wall must
be firm. Do not attach a speaker to a wall that is made of
weak materials such as plaster or veneered woods. Doing
so may cause the speaker to fall.
After attaching each speaker, check that the speaker is
fixed securely. YAMAHA will bear no responsibility for
any accidents caused by improper installations.
–
Hanging on a wall (NX-F300, NX-S300)
You can hang the speakers on a wall using a
commercially available bracket and screws (Diameter:
6 mm). Attach a bracket firmly to the rear of the
speakers using screws. Then mount a screw on the
wall where the speaker is to be hung and hook the
speaker securely onto the mounted screws.
Note
Do not use screw threads measured in inches for this
installation. Use metric screw threads only.
9 En
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SETUP
■ Speaker connections
Note
Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.
Surround
speaker (L)
Surround
speaker (R)
Front
speaker (R)
Front
speaker (L)
Center speaker
–
+
–
+
–
+
–
+
–
+
SPEAKERS
FRONT CENTER SURROUND
DVD receiver
HDMI
FM
XM
DOCK
P
R
Y
VIDEO
75Ω
UNBAL.
L
SYSTEM
CONNECTOR
GND
PCM/DTS
DIGITAL
FRONTCENTER SURROUND
q
AM
R
P
B
TV IN AUX IN LINE OUT
TO NX-SW300
COAXIAL
DIGITAL IN
COMPONENT VIDEO
S
ANTENNA
VIDEO OUT (DVD ONLY)
Subwoofer
10 En
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SETUP
■ Connecting the speaker cables
Notes
Be sure to twist the cable core firmly in a clockwise
direction. Twisting loosely may cause a short.
–
Do not use excessive force when inserting the cable plug.
Doing so may damage the cable or speaker terminals.
When connecting the speakers, fix the speaker cables in
place so that cables do not loosen. If your foot or hand
accidentally gets caught on a loose speaker cable, the
speaker may fall.
–
Good
No Good
2
■ Connecting the DVD receiver and
the subwoofer
Connect the speaker cable with the white line to the
plus (Red (+)) connector on the front/center/surround
speakers and connect the speaker cable with the black
band to the minus (Black (–)) connector.
Connect the subwoofer to DVD receiver using the
system control cable. Attach one end to the subwoofer
and the other to the SYSTEM CONNECTOR
terminal at the rear of the DVD receiver.
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
Lever
Press the lever down, then
Black
band
insert the cable into the hole
and release the lever.
HDMI
L
XM
FM
75Ω
DOCK
P
R
Y
VIDEO
UNBAL.
SYSTEM
CONNECTOR
GND
AM
PCM/DTS
DIGITAL
q
R
P
B
TV IN AUX IN LINE OUT
TO NX-SW300
COAXIAL
DIGITAL IN
C
O
M
P
O
N
E
N
T
S
V
I
D
E
O
ANTENNA
VIDEO OUT (DVD ONLY)
■ Connecting the subwoofer
Connect the speaker cable with the white line to the
plus (Red (+)) connector on the front/center/surround
speakers and connect the speaker cable with the black
band to the minus (Black (–)) connector.
NX-SW300
Notes
–
After inserting the system control cable, be sure to tighten
the cable screws.
Lever
–
Ensure that the speaker cables are correctly connected.
Improper connections may damage the system due to a
short-circuit.
SPEAKERS
–
–
When connecting the speakers, fix the speaker cables in
place so that cables do not loosen. If your foot or hand
accidentally gets caught on a loose speaker cable, the
speaker may fall.
To prevent unwanted noise, do not place the subwoofer
too close to the DVD receiver, AC power adaptor, TV or
other sources of radiation.
Black
band
FRONT CENTER SURROUND
Lift up the lever, then insert
the cable into the hole and
replace the lever.
NX-SW300
11 En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
CONNECTION
■ Connecting a TV
Notes
–
You only need to make one audio connections from the following options (1 or 2) and one video connection from the
following options (1,2or 3) depending on the capabilities of your TV.
Do not connect the power cords until all cable connections are completed.
Audio connections
–
Video connections
1
2
3
1
2
AUDIO
OUT
COAXIAL
OUT
VIDEO
IN
S-VIDEO
IN
Pr/Cr Pb/Cb
Y
R
L
TV
HDMI
L
XM
DOCK
P
R
Y
VIDEO
SYSTEM
CONNECTOR
GND
AM
PCM/DTS
q
DIGITAL
R
P
B
COAXIAL COMPONENT S VIDEO
DIGITAL IN VIDEO OUT (DVD ONLY)
TV IN AUX IN LINE OUT
TO NX-SW300
ANTENNA
1 VIDEO output jack
1 TV IN jacks
Use the supplied video pin cable (yellow) to connect
the VIDEO jack of this DVD receiver to the video
input jack (or A/V In/Video In/Composite/Baseband
jack) of your TV.
To output TV sound from the speakers connected to
this DVD receiver, use commercially available audio
cables (white/red) to connect the TV IN input jacks of
this DVD receiver to the corresponding audio output
jacks of your TV.
2 S VIDEO output jack
2 COAXIAL jack
S-video connections achieve a clearer picture than
composite video connections. Use a commercially
available S-video cable to connect the S VIDEO jack
of this DVD receiver to the S-video input jack (or Y/C
or S-VHS jack) of your TV.
To output TV sound from the speakers connected to
this DVD receiver, use a commercially available
coaxial cable to connect the COAXIAL input jack of
this DVD receiver to the corresponding coaxial output
jack of your TV.
3 COMPONENT VIDEO OUT jacks
Notes
Use commercially available component video cables
(red/blue/green) to connect the Y PB PR jacks of this
DVD receiver to the corresponding component video
TV.
Progressive scan video quality is only available when
using Y PB PR in conjunction with a progressive scan
TV. To activate the progressive scan function see
page 34.
–
If you connect this DVD receiver to the analog audio and
digital audio at the same time, the digital audio signals
input at the COAXIAL jack take priority over the analog
audio signals input at the TV IN jacks.
–
You can connect this DVD receiver to your TV using an
HDMI cable. For details, see “Connecting an HDMI
component” on page 13.
12 En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
■ Connecting an HDMI component
Viewing and Listening to playback
HDMI (High-Definition Multimedia Interface) is the
first industry-supported, uncompressed, all-digital
A/V (audio/video) interface.
By connecting to an HDMI component (such as a
TV), you can enjoy standard, enhanced or high-
definition video as well as multi-channel digital audio
using a single cable.
When used in combination with HDCP (High-
bandwidth Digital Content Protection), HDMI
provides a secure audio/video interface that meets the
security requirements of content providers and system
operators.
from an HDMI component
1 Connect HDMI output jack of this DVD receiver to the
HDMI input jack of your HDMI compatible
component using a commercially available HDMI
cable.
2 Select the appropriate audio output from [HDMI
SETUP] in [AUDIO SETUP PAGE] (see page 33).
3 Select the appropriate video output from [HDMI
SETUP] in [VIDEO SETUP PAGE] (see page 35).
For further information on HDMI, visit the HDMI
website at “http://www.hdmi.org/”.
Notes
–
This DVD receiver is not compatible with HDCP-
incompatible HDMI or DVI components.
–
You need a commercially available HDMI/DVI
conversion cable when you connect this DVD receiver to
other DVI components.
HDMI
IN
–
–
When connecting an HDMI component, refer to the
instruction manual for the component.
Do not disconnect or connect the HDMI cable from this
DVD receiver or turn off the power of the HDMI/DVI
component connected to the HDMI jack of this DVD
receiver while data is being transferred. Doing so may
disrupt playback or cause noise.
TV
HDMI
L
XM
DOCK
SYSTEM
CONNECTOR
GND
AM
R
TV IN AUX IN LINE OUT
TO NX-SW300
ANTENNA
DVD receiver
13 En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
■ Connecting a VCR
Connect a VCR and enjoy video cassette tapes.
VIDEO
IN
VCR
TV
AUDIO
IN
S-VIDEO
VIDEO
IN
OUT
R
L
1
2
1
AUDIO
OUT
VIDEO
OUT
R
L
VCR
HDMI
L
XM
P
R
Y
VIDEO
2
GND
AM
PCM/DTS
q
DIGITAL
P
B
COAXIAL COMPONENT S VIDEO
DIGITAL IN VIDEO OUT (DVD ONLY)
TV IN AUX IN LINE OUT
ANTENNA
DVD receiver
HDMI
XM
DOCK
L
SYSTEM
Using a VCR for recording DVD
playback
CONNECTOR
GND
AM
R
TV IN AUX IN LINE OUT
TO NX-SW300
ANTENNA
1 Connect the S VIDEO output of this DVD receiver to
the S-video input jack of your VCR.
OR
DVD receiver
Connect the VIDEO output jack of this DVD receiver
and the video input jack of your VCR.
Viewing and listening to playback
from a VCR
2 Connect the LINE OUT jacks of this DVD receiver to
1 Connect the video output jack of the VCR and the
the audio input jacks of your VCR.
video input jack of your TV.
2 Connect the AUX IN jacks of this DVD receiver to the
Note
audio output jacks of your VCR.
Some DVDs are copy protected. You cannot record copy-
protected discs using a VCR.
Note
Before starting operation, press AUX repeatedly to select
“AUX ANALOG” to activate the input source.
14 En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
■ Connecting a YAMAHA iPod
Notes
universal dock
–
Only iPod (Click and Wheel), iPod nano, and iPod mini
are supported.
This DVD receiver is equipped with the DOCK
terminal on the rear panel that allows you to connect a
YAMAHA iPod universal dock (such as YDS-10 sold
separately) where you can station your iPod and
control playback of your iPod using the supplied
remote control.
–
You need a YAMAHA iPod universal dock and its
dedicated cable compatible with the DOCK terminal of
this DVD receiver.
2
–
–
Do not connect any iPod accessories (such as
headphones, a wired remote control, or an FM
transmitter) to your iPod when it is stationed in a
YAMAHA iPod universal dock.
Once your iPod is stationed in a YAMAHA iPod
universal dock connected to the DOCK terminal of this
DVD receiver, this DVD receiver begins the signal
transmission with your iPod.
iPod
–
–
Unless your iPod is firmly stationed in a YAMAHA iPod
universal dock connected to the DOCK terminal of this
DVD receiver, audio signals may not be output properly.
Once the connection between your iPod and this DVD
receiver is complete, “DOCKED” appears in the front
panel display. If the connection between your iPod and
this DVD receiver fails, “NOT DOCKED” appears in the
front panel display.
YAMAHA iPod
universal dock
(such as YDS-10
sold separately)
–
Your iPod battery is automatically charged when your
iPod is stationed in a YAMAHA iPod universal dock
connected to the DOCK terminal of this DVD receiver
except when this DVD receiver is turned off, in DVD/CD
mode and in changer mode.
–
–
Only analog audio signals of your iPod are input at the
DOCK terminal, and the analog audio signals can be
output at the analog LINE OUT jacks for recording.
Depending on the type of iPod, you may need to insert
one of the iPod adapters supplied with a YAMAHA iPod
universal dock into the dock slot before you station your
iPod.
HDMI
L
XM
FM
DOCK
75
UNBAL.
SYSTEM
CONNECTOR
GND
AM
R
TV IN AUX IN LINE OUT
TO NX-SW300
ANTENNA
DVD receiver
1 Connect a YAMAHA iPod universal dock to the
DOCK terminal on the rear panel of this DVD
receiver using its dedicated cable.
2 Once the connection is complete, station your iPod in
the YAMAHA iPod universal dock.
For details on how to operate your iPod, see page 27.
15 En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
■ Connecting a digital audio
■ Connecting a portable audio
component
player
Be sure to turn off the volume of this DVD receiver and the
connected component before making connections.
COAXIAL
OUT
INPUT
VOLUME
AUDIO/VIDEO
CD player, etc.
4
P
O
R
T
ABLE
PLAYXCHANGE
1
2
3
5
DISC
PORTABLE
P
R
Y
VIDEO
PCM/DTS
DIGITAL
q
P
B
COAXIAL COMPONENT S VIDEO
DIGITAL IN VIDEO OUT (DVD ONLY)
DVD receiver
Portable audio
player
Listening to playback
Connect the COAXIAL jack of this DVD receiver to
the digital output jack of a digital audio component.
Listening to playback
Use the PORTABLE jack on the front panel to
connect your portable audio player to this DVD
receiver.
Notes
–
–
–
–
Before starting operation, press AUX repeatedly to select
“AUX DIGITAL” to activate the input source.
You cannot hear or record the Super Audio-CD or MP3-
CD playback if you use a digital connection.
For playback through a digital connection, set the digital
output of that player to PCM format.
Note
Before starting operation, press AUX repeatedly to select
“AUX FRONT” to activate the input source.
Always refer to the owner’s manual of the connected
component for complete connection and usage details.
16 En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
■ Connecting the FM/AM antennas
AM loop
antenna
2
1
2
FM wire
antenna
HDMI
XM
GND
AM
R
TV IN AUX IN LINE OUT
ANTENNA
Ground (GND terminal)
For minimum interference,
connect the antenna GND terminal
to a good earth ground. A good
earth ground is a metal stake
driven into moist earth.
1 Connect the supplied AM loop antenna to the AM
ANT terminal. Place the AM loop antenna on a shelf
or attach it to a stand or wall.
2 Connect the supplied FM wire antenna to the FM
ANT terminal. Extend the FM wire antenna and fix its
ends to the wall.
Notes
–
–
Adjust the position of the antennas for optimal reception.
Place the antennas as far as possible from your TV, VCR
or other sources of radiation to prevent unwanted
interference.
–
–
The AM loop antenna should be placed away from this
DVD receiver.
A properly installed outdoor antenna provides clearer
reception than an indoor one. If you experience poor
reception quality, an outdoor antenna may improve the
quality. Consult the nearest authorized YAMAHA dealer
or service center about outdoor antennas.
17 En
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
■ Inserting batteries into the
■ Using the remote control
Use the remote control within 6 m (20 ft approx.) of
the DVD receiver and point it toward the remote
control sensor.
remote control
3
1
2
Within 6 m
(20ft approx.)
1 Open the battery compartment.
2 Insert two batteries type R06 or AA, following the
indications (+/–) inside the compartment.
3 Close the battery compartment.
To replace the batteries
If the batteries grow old, the effective operation
distance of the remote control decreases considerably.
If this happens, replace the batteries with two new
ones as soon as possible.
Handling the remote control
Do not spill water or other liquids on the remote
control.
•
•
•
Do not drop the remote control.
Do not leave or store the remote control in the
following types of conditions:
Notes
–
Insert batteries correctly according to the polarity
markings (+/–). The batteries inserted in the opposite
direction may leak.
–
–
–
–
places of high humidity, such as near a bath
places of high temperature, such as near a heater or stove
places of extremely low temperatures
dusty places
–
–
–
Replace the exhausted batteries immediately with new
ones to prevent a leakage.
Remove the batteries from the compartment if the remote
control is not used for more than a month.
If the batteries have leaked, dispose of them immediately.
Avoid touching the leaked material or letting it come into
contact with clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have the
same shape and color.
–
–
–
Dispose of the batteries correctly in accordance with your
local regulations.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries and reset the remote control codes.
When changing the batteries, be careful not to press
any of the buttons on the remote control. Doing so will
clear the contents of the memory.
18 En
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
■ Turning on the power
■ Setting a TV type and display
This DVD receiver is compatible with both NTSC and
PAL video formats. Select the color system that
matches your TV.
IMPORTANT!
Make sure that you have completed all the necessary
connections (see page 12).
2
1 Connect the AC power cord to an AC outlet.
Note
For details on how to use the OSD menu, see page 29.
2 Turn on your TV and set the TV to the correct Video
IN channel (e.g. EXT1, EXT2, AV1, AV2, AUDIO/
VIDEO, etc.). Refer to the manual supplied with your
TV for details.
VIDEO SETUP PAGE
TV TYPE
PAL
3 Turn on this DVD receiver.
TV DISPLAY
NTSC
MULTI
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
4 Press DVD/CD on the remote control.
→ “DVD/CD” appears in the front panel display and
the default screen appears on the TV.
About the auto standby function
This DVD receiver is automatically set to the standby
mode when disc playback is stopped or paused for
more than 15 minutes.
PAL
Select this if the connected TV is a PAL system TV. It
will change the video signals of NTSC discs and
output them in PAL format.
When “SCREEN SAVER” is set to “ON”
(see page 31):
The background is displayed when disc playback is
stopped or the paused picture is displayed for 15
minutes.
NTSC
Select this if the connected TV is an NTSC system TV.
It will change the video signals of PAL discs and
output them in NTSC format.
MULTI
Select this if the connected TV is compatible with
both NTSC and PAL formats (such as a multi-system
TV). The output format will be in accordance with the
video signals of the disc.
Background
Example of a
paused picture
Notes
The screen saver is displayed for 15 minutes.
–
Before changing the current TV standard setting, ensure
that your TV supports the selected TV type.
If the picture is not displayed properly on your TV, wait
for 15 seconds for this DVD receiver to activate
automatic recovery.
–
When changing the color system using
the remote control:
This DVD receiver is set to the standby mode.
When “SCREEN SAVER” is set to “OFF”
(see page 31):
1 Press
on the front panel to open the disc tray.
The background or the paused picture is displayed for
30 minutes.
2 Press , and then press AUDIO.
→ The setting is switched between NTSC and PAL.
This DVD receiver is set to the standby mode.
19 En
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Setting an aspect ratio for your TV
Setting the audio, subtitle and disc
menu languages
You can set the aspect ratio of this DVD receiver to
match your TV. If the aspect ratio of your TV is 4:3,
you do not need to change this setting. If you have a
widescreen TV, select [16:9].
PREFERENCE PAGE
For details, see “Setting the TV display” on page 34.
AUDIO
ENGLISH
CHINESE
JAPANESE
FRENCH
SPANISH
PORTUGUESE
POLISH
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
4:3 PAN SCAN
PROGRESSIVE
4:3 LETTER BOX
PASSWORD
ITALIAN
PICTURE SETTING 16:9
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
Note
Before displaying [PREFERENCE PAGE], be sure to press
stwice to stop playback.
■ Setting language preferences
[AUDIO] (audio language)
You can select your own preferred language settings.
This DVD receiver automatically switches to your
preferred language whenever you load a disc. If the
selected language is not available on the disc, the
default language of the disc will be used instead. The
OSD language in the system menu remains once
selected.
[SUBTITLE] (subtitle language)
[DISC MENU] (disc’s menu language)
Note
For details on how to use the OSD menu, see page 29.
Setting the OSD language
GENERAL SETUP PAGE
DVD AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DIVX(R) VOD CODE
ENGLISH
FRANÇAIS
ESPAÑOL
20 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC OPERATION
DISC OPERATION
IMPORTANT!
■ General operation
–
If the inhibit icon ( or “X”) appears on the TV
screen when a button is pressed, the function for
that button is not available on the current disc or at
the current time.
Unless stated otherwise, all operations described here
are carried out using the supplied remote control.
3
POWER DIMMER SLEEP POWER
–
–
DVD discs and a DVD receiver are designed with
regional restrictions. Before playing a disc, make
sure the disc is for the same zone as your DVD
receiver.
Do not push on the disc tray or put any objects other
than discs on the disc tray. Doing so may cause the
DVD receiver to malfunction.
TV
Numeric
keypad (0-9)
SCAN PAGE
PROG REPEAT A - B SHUFFLE
TOP MENU/RETURN
ON SCREEN
CH +
DISPLAY
ENTER
CAT
CAT
OK
+
MENU
SRCH
SET UP
CH
h
e
■ Basic playback
s
PRESET
DISC
SKIP
SUBTITLE AUDIO ANGLE ZOOM
1 Press STANDBY/ON (
) on the front panel or
uPRESET d
(b/ a)
TRE
POWER (
) on the remote control.
TVVOL TV CH
VOL
BASS
EFFECT SURR
TV
MUTE
DOCK
INPUT
2 Press on the front panel to open the disc tray.
XM
TV
AUX
TUNER DVD/CD
3 Place discs in the disc tray with the printed side up.
Pausing playback
1 During playback, press e.
→ Playback is paused and the sound is muted.
2 Press eagain to select the next picture frame.
3 To resume normal playback, press h.
Selecting a track/chapter
4 Press h/eon the front panel or hon the remote
control.
→ The disc tray closes and playback starts
automatically for all of the loaded discs in the tray in
sequence.
•
Press b/ aor use the numeric keypad (0-9)
to select a track/chapter number
•
During repeat playback of a track/chapter, press b
/ ato replay the same track/chapter.
5 To stop playback, press son the front panel or on the
remote control.
Searching backward/forward
1 Press and hold b/ a.
•
•
To play back a specific disc directly, press
DISC SKIP repeatedly on the remote control or press
DISC (1, 2, 3, 4, 5) on the front panel.
Press PLAYXCHANGE on the front panel to open the
disc tray, and then reload or unload discs without
interrupting current disc playback.
2 While searching, press b/ arepeatedly to
select the desired speed.
3 To resume normal playback, press h.
•
•
Playback stops after all discs have been played.
When the disc tray is open, press
Stopping playback
•
Press s.
h/e,
, PLAYXCHANGE or DISC (1, 2, 3, 4, 5)
to close the disc tray automatically.
21 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC OPERATION
■ Selecting various repeat/shuffle
Shuffle (except DVD/DVD-Audio/VCD/
SVCD/DivX)
functions
With the Shuffle function, you can play tracks in
random order.
During playback, press SHUFFLE repeatedly to
select from SHUFFLE DISC, SHUFFLE ALL DISC,
and SHUFFLE OFF.
→ The selected mode appears in the front panel
display for several seconds.
SHUFFLE DISC: all tracks on the disc currently
playing are played in a random order.
SHUFFLE ALL DISC: tracks from all discs are
played in a random order:
Repeat
Each time you press REPEAT, the display changes as
follows:
•
Repeating chapter/title/disc (DVD-V)
CHAPTER
REPEAT OFF
TITLE
DISC
ALL DISC
Repeat track/disc
(except DVD-V/DVD-A)
To exit from the shuffle mode
OFF.
TRACK
DISC
ALL DISC
•
REPEAT OFF
Repeating track/group/disc (DVD-A)
TRACK GROUP
REPEAT OFF DISC
Notes
–
For Hybrid SA-CDs, tracks on the SA-CD layer will be
played by default. (see “Playing Super Audio CDs” on
page 25).
ALL DISC
–
–
If the disc currently playing is a CD, only tracks from
CDs and the CD layer of SA-CDs will be played.
If the disc currently playing is formatted in SA-CD (SA-
CD layer), MP3 or WMA, tracks on the disc currently
playing are played in a random order. When all the tracks
on that disc have been played, shuffle playback continues
with the next disc.
CHAPTER*: repeats the current chapter.
TITLE*: repeats the current title.
DISC: repeats the entire disc.
ALL DISC: repeats all discs loaded in the tray.
TRACK*: repeats the current track.
■ Operations for video playback
GROUP:* repeats the current group
(DVD/VCD/SVCD)
REPEAT OFF: exits from the repeat mode.
* This feature may not be available with some discs.
Using the disc menu
Depending on the disc, a menu may appear on the TV
screen once you load the disc.
Notes
–
–
–
The availability of the repeat feature differs depends on
the disc.
When only one disc is available in the disc tray, it is
continuously played when
For VCD, repeat playback is not available when the PBC
To select a playback feature or item
•
•
Use
/
/
/
or the numeric keypad
ALL DISC is selected.
(0-9) on the remote control, and then press ENTER
(OK) to start playback.
mode is selected.
To access or exit from the menu
Press MENU on the remote control.
Repeating a section within a chapter/
track
1 While playing a disc, press A-B at the desired starting
point.
2 Press A-B again at the desired end point.
→ The section repeats continuously.
3 To exit the sequence, press A-B.
Note
A and B can only be set within the same chapter/track.
22 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC OPERATION
On-screen display (OSD)
Resuming playback from the last
stopped point
The OSD menu shows disc playback information
(e.g., the title or chapter number, elapsed playing time
or audio/subtitle language). A number of operations
are possible without interrupting disc playback.
You can resume playback of the last 10 discs, even if
the discs were ejected or the power of this DVD
receiver was turned off.
1 Load one of the last played 10 discs.
→ “LOADING #” (#: the disc tray number (1-5))
appears on the TV screen.
1 During playback, press ON SCREEN.
→ A list of available disc information appears on the
TV screen.
3
2 Press hwhile “LOADING #” is displayed on the TV
screen.
DVD
MENU
→ “RESUME PLAY” appears on the TV screen and
the disc is played back from the last point.
TITLE
02/14
CHAPTER
AUDIO
02/14
5.1CH
To cancel the resume mode
When playback is stopped, press sagain.
SUBTITLE
BITRATE 16
OFF
•
TITLE ELASPED 0:02:25
VCD/SVCD
Advancing by frame
1 During playback, press eon the remote control.
→ Playback is paused and sound is muted.
MENU
TRACK
02/14
DISC TIME
TRACK TIME
REPEAT
0:49:17
0:03:43
2 Press eagain to select the next picture frame.
3 To resume normal playback, press h.
OFF
BITRATE 16
TITLE ELASPED 0:02:25
2 Press
/
to view the information, and then
Preview function
press ENTER (OK) to access the selected item.
Preview function includes the following two types.
Digest:
This function displays a thumbnail to help you to
preview the following sections of the disc.
TITLE, CHAPTER, GROUP, TRACK
Interval:
3 Use the numeric keypad (0-9) to input the number/
time or press
/
to make a selection, and then
press ENTER (OK) to confirm the selection.
→ Playback changes to the selected time or to the
selected title/chapter/track.
This function divides the following options at regular
intervals to help you preview the scene you want to
see.
To exit from the menu
Press ON SCREEN again.
•
TITLE, CHAPTER, GROUP, TRACK, DISC
Zooming
This function allows you to enlarge or reduce the
image on the TV screen and pan through the enlarged
picture.
1 During playback, press ZOOM repeatedly to display
the picture at different scales.
(Example of 6 thumbnails in the display)
2 Use
picture.
→ Playback continues.
/
/
/
to pan through the enlarged
To return to the original size
•
Press ZOOM again.
23 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC OPERATION
Note
Camera angle
The menu appears on the TV screen differs depending on the
disc or current status (playback or stop).
If the disc contains sequences recorded from different
camera angles, this function allows you to view the
picture from a number of different angles.
Preview title/chapter
(DVD for example)
•
Press ANGLE repeatedly to select the desired angle.
1 Press SCAN.
Audio
For DVD - Changing the audio language and/or
→ The menu appears on the TV screen.
SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
format
•
•
Press AUDIO repeatedly to select an audio language.
For VCD - Changing the audio channel
Press AUDIO repeatedly to select the available audio
channels provided by the disc (STEREO, MONO
LEFT, MONO RIGHT or MIX-MONO).
CHAPTER INTERVAL
2 Press
/
to highlight [TITLE DIGEST],
[CHAPTER DIGEST], [TITLE INTERVAL] or
[CHAPTER INTERVAL] and then, press ENTER
(OK) to open one option.
Subtitles
Press SUBTITLE repeatedly to select a subtitle
•
language for DVD, DivX and DVD-VR format discs
that contain subtitles.
3 Use b/ ato open the previous or next page.
4 Use
/
/
/
to select a title/chapter or use
the numeric keypad (0-9) to input the selected title/
chapter number next to [SELECT].
■ Special VCD & SVCD features
Playback control (PBC)
5 Press ENTER (OK) to start playback from the scene
you select.
For VCD with playback control (PBC) feature
(version 2.0 only)
To exit from the preview function
1 Press MENU to toggle between “PBC ON” and “PBC
OFF”.
•
•
Use
/
/
/
to highlight [EXIT] and press
ENTER (OK) to confirm.
→ If you select “PBC ON”, the disc menu (if
available) appears on the TV.
To return to the preview menu
In step 3and 4, use
[MENU] and then, press ENTER (OK) to confirm.
/
/
/
to highlight
2 Use b/ aor the numeric keypad (0-9) to
select a playback option.
3 During playback, press TOP MENU/RETURN to
■ Special DVD features
return to the menu screen (if PBC is selected).
back a disc directly from the beginning:
Playing by title
•
Press MENU on the remote control to turn off PBC.
This function can also be accessed via the
[PREFERENCE PAGE] menu (see “PBC” on
page 37).
1 Press TOP MENU/RETURN.
→ The disc title menu appears on the TV screen.
2 Use
/
/
/
or the numeric keypad
(0-9) to select a playback option.
3 Press ENTER (OK) to confirm your selection.
24 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC OPERATION
®
■ Playing MP3/JPEG/DivX /WMA
Playing MP3 music and JPEG pictures
simultaneously
1 Load a disc that contains both music and picture data.
→ The disc menu appears on the TV screen.
discs
®
This DVD receiver can play MP3, JPEG, DivX and
WMA files on a personally recorded CD-R/RW disc
or commercial CD.
1 Load a disc.
2 Select an MP3 track.
→ The disc reading time may exceed 30 seconds due
to the complexity of the directory/file configuration.
→ The data disc menu appears on the TV screen.
3 During MP3 music playback, select a picture from the
TV screen, and then press h.
3
→ The picture files are played back one after another
until the end of the folder.
2 Playback starts automatically. If not, press h.
00:00 00:00
001/020
Stopping the playback
Press MENU, and then press s.
•
Favorite
Note
MP3
Piano
Some files on Kodak or JPEG discs may be distorted during
playback due to the configuration and characteristics of the
discs.
Cello
MP3
MP3 Jazz
MP3 Live
■ Playing Super Audio CDs
1 Load a Super Audio CD.
During playback, you can:
→ The disc menu appears on the TV screen.
1 Press b/ ato select another track/file in the
2 Playback starts automatically.
current folder.
2 Press eto pause playback.
3 Press hto resume playback.
Notes
–
If the Super Audio CD consists of multi-channel and
stereo tracks, multi-channel tracks have the priority for
playback. For details about Super Audio CD, see page 53.
Programming function is not available when playing back
Super Audio CD tracks.
Notes
–
–
It may not be possible to play certain MP3, JPEG,
®
DivX and WMA discs due to the configuration and
To playback stereo tracks
Use to make your selection from the disc
menu, and then press h.
characteristics of the discs or the recording conditions.
It is normal to experience an occasional pixelation during
DivX® playback due to poor clarity of digital contents
during internet downloading.
–
•
/
–
During the playback of the JPEG pictures, press
to rotate the pictures.
/
/
/
Selecting a folder and track/file
1 Press to select a folder, and then press
/
ENTER (OK) to open the folder.
2 Press
/
to select a track/file.
3 Press ENTER (OK) to confirm your selection.
→ Playback starts from the selected file to the end of
the folder.
25 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC OPERATION
■ DVD-Audio Features
Preview function (JPEG)
DVD-Audio has developed for the sole purpose of
creating high quality pure sound with Linear PCM and
Packed PCM (lossless coding) in up to six audio-
channels. Sampling frequencies of 192 kHz/24 bits are
supported.
This function displays the content of the current folder
or the entire disc.
1 Press sduring the playback.
→ 12 thumbnail pictures appear on the TV screen.
Moreover, many DVD-Audio discs offer slide show
and page turn capabilities.
Note
When you play a down mix prohibited disc,
DOWNMIX indicator does not light up in the front
panel display.
Changing pages
Some DVD-Audio discs contain information pages for
photo galleries, artist biographies, lyrics, etc.
Each time you press PAGE on the remote control, the
2 Press b/ ato display the other pictures on the
•
previous/next page.
display moves to the next page.
3 Use
/
/
/
to highlight one of the
Playing bonus groups
pictures, and then press ENTER (OK) to start
playback.
Some discs contain bonus groups that require a four-
digit password to gain access. In this case, consult the
disc jacket and other packaging for information.
OR
Move the cursor to highlight
on the bottom of
the page to start playback from the first picture on the
current page.
1 Press sto stop playback, and then press ON
SCREEN.
4 Press MENU to return to the picture CD menu.
→ The group and track list is displayed on the TV
screen.
2 Press
/
to select a bonus group, and then
Zooming pictures
1 During playback, press ZOOM repeatedly to display
press ENTER (OK)
3 Enter a four-digit password using the numeric
keypad (0-9), and then press ENTER (OK)
the picture at the different scales.
2 Use
/
/
/
to view the zoomed picture.
4 Press
/
to select a track, and then press
ENTER (OK).
Playback with the multi-angles
During playback, use to rotate the
picture on the TV screen.
/
/
/
DVD-Video mode
Some DVD-Audio discs include DVD-Video contents
that can be played on conventional DVD-Video
players.
: rotates the picture vertically.
: flips the picture horizontally.
: rotates the picture counter-clockwise.
: rotates the picture clockwise.
■ Playing JPEG/Kodak picture CDs
1 Load a disc (JPEG or Kodak picture CD).
→ For JPEG discs, the picture menu appears on the
TV screen.
Scan effect
•
Press ANGLE repeatedly to choose a scan effect.
→ Various scan effects appear in the top left corner of
the TV screen.
→ For Kodak discs, the slideshow begins.
2 Press hto start the slideshow.
26 En
Download from Www.Somanuals.com. All Manuals Search And Download.
IPOD® OPERATION
®
iPod OPERATION
→ The iPod menu appears on the TV screen.
■ Controlling iPod using the OSD
Once your iPod is stationed in the YAMAHA iPod
universal dock, you can perform the operations of
your iPod using the supplied remote control with the
aid of the OSD menu. You can also browse the songs
stored on your iPod in the OSD menu.
03:45 05:18
013/028
iPod
3
Playlists
Artists
Albums
Songs
Notes
–
–
Operations can not be done with the controls on your iPod.
The YAMAHA background appears in the display
window of your iPod.
–
–
–
You cannot browse the photos or video clips stored on
your iPod using the OSD of this DVD receiver.
The music menu items shown on the iPod menu may
differ depending on the disc.
If the connection between your iPod and this DVD
receiver fails, “NOT DOCKED” appears in the front
panel display.
When you operate your iPod using the OSD menu of this
DVD receiver, “All” folder is not displayed.
If the song you want to play is not found in the music
menu items, select it from “Songs”.
2 Use
/
or ENTER (OK) to move the cursor to
select the desired music menu item from the following
options.
•
•
•
•
•
•
Playlists > Songs
Artists > Album > Songs
Album > Songs
–
–
Songs
Genres > Artists > Albums > Songs
Composers > Albums > Songs
3 Press hto start playback.
Remote control functions
To return to the previous menu
•
Press MENU.
POWER DIMMER SLEEP POWER
TV
Shuffle
Use this feature to set this DVD receiver to play songs
SCAN PAGE
PROG REPEAT A - B SHUFFLE
or albums in a random order.
Press SHUFFLE to turn on the shuffle mode.
TOP MENU/RETURN
ON SCREEN
CH +
Cursors
),
ENTER (OK)
•
DISPLAY
(
/
ENTER
→ “SHUFFLE” appears on your TV.
CAT
CAT
OK
+
MENU
SRCH
SET UP
To exit from the shuffle mode
Press SHUFFLE again.
CH
MENU
h
e
•
s
PRESET
DISC
SKIP
dPRESETu
(b/ a)
Note
SUBTITLE AUDIO ANGLE ZOOM
This function is only available when your iPod is set to the
shuffle mode.
TRE
TVVOL TV CH
VOL
BASS
EFFECT SURR
TV
MUTE
DOCK
INPUT
XM
DOCK
Repeat
Use this feature to set this DVD receiver to repeat one
TV
AUX
TUNER DVD/CD
song or a sequence of songs.
•
Press REPEAT repeatedly to select from REPEAT
ONE, REPEAT ALL, and REPEAT OFF.
1 Press INPUT on the front panel or DOCK on the
remote control repeatedly until “DOCKED” appears
in the front panel display.
→ The selected mode appears on your TV.
REPEAT ONE: set this DVD receiver to repeat one song.
REPEAT ALL: set this DVD receiver to repeat a
sequence of songs.
To exit from the repeat mode
•
Press REPEAT repeatedly to select REPEAT OFF.
27 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
DVD SETUP MENU OPTIONS
Set up menu
Menu
Parameter/Submenu*
DVD-AUDIO
DVD-AUDIO MODE
DVD-VIDEO MODE
GENERAL
SETUP PAGE
(page 30)
DISC LOCK
PROGRAM
UNLOCK
LOCK
FTS
FDS
OSD LANGUAGE
SCREEN SAVER
ENGLISH, FRANÇAIS, ESPANÕL
ON
OFF
DIVX(R) VOD CODE
SPEAKER SETUP
(Registration code)
SPEAKERS VOLUME*
FRONT LEFT, FRONT RIGHT, CENTER,
SUBWOOFER, SURROUND L, SURROUND R
AUDIO SETUP
PAGE
(page 32)
SPEAKERS DELAY*
HDMI AUDIO*
LPCM OUTPUT*
OFF
CENTER, SURROUND L, SURROUND R
OFF, ALL, PCM ONLY
HDMI SETUP
48KHz, 96KHz
CD UPSAMPLING
NIGHT MODE
88.2 kHz (X2)
ON
OFF
LIP SYNC
TV TYPE
DELAY TIME
PAL
NTSC
VIDEO SETUP
PAGE
MULTI
(page 34)
TV DISPLAY
4:3 PAN SCAN
4:3 LETTER BOX
16:9
PROGRESSIVE
ON
OFF
PICTURE SETTING
STANDARD
BRIGHT
SOFT
PERSONAL*
BRIGHTNESS, CONTRAST, TINT, COLOR
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
ON
OFF
ON
OFF
WIDE SCREEN FORMAT*
HDMI VIDEO*
SUPER WIDE, 4:3 PILLAR BOX, OFF
480P, 576P, 720P, 1080I, AUTO
AUDIO
ENGLISH, CHINESE, JAPANESE, FRENCH, SPANISH, PORTUGUESE, POLISH, ITALIAN,
SUBTITLE
DISC MENU
PARENTAL
PBC
TURKISH, NORWEGIAN, FINNISH, GERMAN, SWEDISH, DANISH, DUTCH,
PREFERENCE
PAGE
(page 36)
HUNGARIAN, CZECH, OTHERS
1 KID SAFE, 2 G, 3 PG, 4 PG 13, 5 PGR, 6 R, 7 NC 17, 8 ADULT
ON
OFF
MP3/JPEG NAV
VR LIST
WITH MENU
WITHOUT MENU
ORIGINAL LIST
PLAY LIST
CHANGE
STANDARD
CYRILLIC
RESET
PASSWORD
DIVX SUBTITLE
DEFAULT
28 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
■ Using the OSD menu
3 Press
/
to highlight the desired menu item,
Setup is carried out on the TV screen, enabling you to
customize this DVD receiver to suit your own
particular requirements. Follow the procedures below
to start the OSD menu operations.
and then press
or ENTER (OK).
→
If the selected menu item has submenus, repeat step
3
.
→ If the selected menu item has adjustment window,
proceed to step 5.
POWER DIMMER SLEEP POWER
TV
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
3
SCAN PAGE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
STANDARD
BRIGHT
SOFT
PROG REPEAT A - B SHUFFLE
Menu items
TOP MENU/RETURN
ON SCREEN
CH +
Parameters
DISPLAY
PERSONAL
ENTER
CAT
CAT
OK
Cursors
),
ENTER (OK)
+
(
/
/
/
MENU
SRCH
SET UP
CH
SET UP
4 Press
/
to select the desired parameter, and
PRESET
then press ENTER (OK) to confirm your selection.
DISC
SKIP
SUBTITLE AUDIO ANGLE ZOOM
–
Refer to the following pages for details of the menu that
requires a particular operation.
TRE
TVVOL TV CH
VOL
BASS
EFFECT SURR
TV
MUTE
DOCK
INPUT
VIDEO SETUP PAGE
TV TYPE
XM
DVD/CD
TV
AUX
TUNER DVD/CD
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
STANDARD
BRIGHT
Parameters
CLOSED CAPTION
HDMI SETUP
SOFT
PERSONAL
1 Press DVD/CD, and then press SET UP to display the
OSD menu on your TV.
To return to the previous menu
Press
Setup page
icons
•
•
.
GENERAL SETUP PAGE
DVD AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DIVX(R) VOD CODE
To exit from the menu
Press SET UP.
Menu items
If the parameter has the adjustment
window:
5 Press
/
to adjust the parameter, and then press
ENTER (OK) to confirm your selection.
2 Press
/
to select the desired setup page icon, and
then press ENTER (OK).
→ Menu items and parameters appear.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
VIDEO SETUP PAGE
PICTURE SETTING
BLACK LEVEL
STANDARD
BRIGHT
TV TYPE
PAL
CLOSED CAPTION
HDMI SETUP
SOFT
PERSONAL
TV DISPLAY
NTSC
MULTI
Parameters
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
Menu items
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
Parameter
adjustment
window
COLOR
29 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
■ General setup
Programming disc tracks
Program: Track
(except for Picture CD/SA-CD/MP3/WMA/
DivX®)
GENERAL SETUP PAGE
DVD AUDIO
You can playback the contents of a disc in the desired
order by programming the tracks to be played. You
can store up to 20 tracks per disc with a maximum of
10 discs.
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DIVX(R) VOD CODE
1 Press PROG on the remote control.
OR
[GENERAL SETUP PAGE] - [PROGRAM] - [FTS]
Selecting DVD-Audio or DVD-Video
PROGRAM: TR (01-17)
6
7
8
9
_ _
_ _
_ _
_ _
1
2
3
4
5
04
10
_ _
_ _
_ _
[GENERAL SETUP PAGE] - [DVD-AUDIO]
DVD-AUDIO MODE
Select this to playback the contents of the DVD-
Audio.
10 _ _
START
EXIT
NEXT
DVD-VIDEO MODE
Select this to playback the contents of the DVD-
Video.
To input your favorite tracks/chapters
2 Use the numeric keypad (0-9) to enter a valid track/
chapter number.
Notes
–
The DVD-AUDIO indicator lights up when a DVD-
Audio disc is playing.
3 Use
/
/
/
to move the cursor to the next
–
When you select DVD-VIDEO MODE, the
DVD-AUDIO indicator goes out.
position.
•
•
If the track number has more than ten digits, press
ato move to the next page, and then proceed with
programming,
OR
Locking/Unlocking discs for viewing
Not all discs are rated or coded by the manufacturer of
the disc. You can prevent playback of a specific disc
by locking the disc. You can lock up to 40 discs on this
DVD receiver.
Use
/
/
/
to highlight [NEXT] on the
program menu, and then press ENTER (OK).
4 Repeat steps 2and 3to input another track/chapter
number.
[GENERAL SETUP PAGE] - [DISC LOCK]
UNLOCK
To remove a track
Select this to unlock the disc and allow future
5
Use
/
/
/
to move the cursor to the track
you want to remove, and then press ENTER (OK)
→ The track is removed from the program menu.
.
LOCK
Select this to lock playback of the current disc.
Subsequent access to a locked disc requires a six-digit
password. The default password is ‘000 000’ (see
“Changing the password” on page 38).
30 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
Program: Disc
You can playback discs in the desired order by
programing the discs to be played. You can store up to
5 discs.
OSD language
This menu contains various language options for the
on-screen display (OSD) language. For details, see
“Setting the OSD language” on page 20.
1 Press PROG on the remote control.
[GENERAL SETUP PAGE] - [OSD LANGUAGE]
OR
[GENERAL SETUP PAGE] - [PROGRAM] - [FDS]
3
Screen saver
Use this feature to turn on or off the screen saver.
[GENERAL SETUP PAGE] - [SCREEN SAVER]
FAVORITE DISC SELECTION
(1) DISC:_
(2) DISC:_
(3) DISC:_
(4) DISC:_
(5) DISC:_
ON
Select this if you wish to turn off the TV screen when
disc playback is stopped or paused for more than 15
minutes.
OFF
START
EXIT
Select this to disable the screen saver function.
To input your favorite discs
®
DivX VOD registration code
2 Use the numeric keypad (0-9) to enter a valid disc
number.
®
Yamaha provides you with the DivX VOD (Video On
Demand) registration code that allows you to rent and
®
3 Use
/
/
/
to move the cursor to the next
purchase videos using the DivX VOD service. For
[GENERAL SETUP PAGE] - [DIVX(R) VOD CODE]
→ The window displaying the registration code
appears.
position.
4 Repeat steps 2and 3to input another disc number.
To remove a disc
To exit from the window
Press ENTER (OK).
5 Use
/
/
/
to move the cursor to the disc
•
you want to remove, and then press 0.
→ The disc is removed from the program menu.
Notes
®
–
All the videos downloaded from DivX VOD can only be
played back on this DVD receiver.
To start program playback
®
•
•
Use
/
/
/
to highlight [START] on the
–
The time search function is not available during DivX
movie playback.
program menu, and then press ENTER (OK).
→ Playback starts for the selected tracks or discs in
the programmed sequence.
To exit from program playback
Use
/
/
/
to highlight [EXIT] on the
program menu, and then press ENTER (OK).
31 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
[SPEAKERS VOLUME]
Volume level setting for individual speakers (–6dB to
+6dB).
■ Audio setup
AUDIO SETUP PAGE
SPEAKER SETUP
HDMI SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
SPEAKERS VOLUME SETUP
FRONT LEFT
FRONT RIGHT
CENTER
0dB
0dB
0dB
0dB
0dB
0dB
SUBWOOFER
SURROUND L
SURROUND R
[SPEAKERS DELAY]
Speaker setup
Delay time settings is in relation to the listening
position/distance for center and surround speakers (0
MS to 15 MS).
You can adjust the delay times (for center and
surround speakers only) and volume level for
individual speakers. These adjustments let you
optimize the sound of your system to best suit your
surroundings and setup.
SPEAKERS DELAY SETUP
CENTER
SURROUND L
SURROUND R
0 MS
0 MS
0 MS
Notes
–
Press SURR on the remote control to select the multi-
channel surround mode before adjusting the speaker
settings (see page 46).
–
Before setting [SPEAKER SETUP], be sure press s
twice to stop playback.
Notes
–
Use a longer delay time settings when the surround
speakers are closer to the listener than the front speakers.
A test tone will be automatically generated to help you
judge the sound level of each speaker.
–
AUDIO SETUP PAGE
SPEAKER SETUP
HDMI SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
SPEAKER SETUP PAGE
SPEAKERS VOLUME
SPEAKERS DELAY
32 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
HDMI setup
CD upsampling
When you have connected this DVD receiver to an
HDMI-compatible component via HDMI jack, adjust
the following menu items to match the audio output
capability of this DVD receiver.
Use this feature to convert your music CD to a higher
sampling rate using sophisticated digital signal
processing for better sound quality. If you activate the
upsampling function, this DVD receiver automatically
switches to the stereo mode.
[AUDIO SETUP PAGE] - [HDMI SETUP]
[AUDIO SETUP PAGE] - [CD UPSAMPLING]
3
OFF
AUDIO SETUP PAGE
Select this to disable CD-upsampling.
SPEAKER SETUP
HDMI SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
88.2 kHz (X2)
Select this to convert the sampling rate of CDs to
twice that of the original.
HDMI SETUP PAGE
Notes
HDMI AUDIO
OFF
LPCM OUTPUT
ALL
PCM ONLY
–
This setting is only valid for signals output at the
analog jacks.
–
If you have activated the upsampling function, this
DVD receiver automatically switches to stereo
mode.
[HDMI AUDIO]
Adjust the audio output depending on the connected
component.
Night mode
In the night mode, high volume output is softened and
low volume output is brought upward to an audible
level. It is useful when you watch your favorite action
movie without disturbing others at night.
OFF
Selects this to turn off the HDMI audio output.
ALL
Select this if you have connected this DVD receiver to
a multi-channel decorder or receiver via the HDMI
jack of this DVD receiver.
[AUDIO SETUP PAGE] - [NIGHT MODE]
ON
Select this to level out the volume.
PCM ONLY
OFF
Select this if the component you have connected via
the HDMI jack is not capable of decording multi-
channel audio signals. The audio sampling rate
depends on [LPCM OUTPUT] setting.
Select this when you want to enjoy the full dynamic
range of surround sound.
Note
[LPCM OUTPUT]
This function is only available for Dolby Digital.
Set this if you have connected this DVD receiver to a
PCM-compatible component via HDMI jack. Discs
are recorded at a certain sampling rate. The higher
sampling rate provides the better sound quality.
Lip synchronization
This feature allows you to delay the sound output from
the speaker in order to synchronize it with the video
image. This may be necessary when using certain
LCD monitors or projectors.
48KHz
Select this to play back discs recorded at the sampling
rate of 48kHz. All 96kHz PCM data streams (if
available) are converted to the sampling rate of 48kHz.
[AUDIO SETUP PAGE] - [LIP SYNC]
•
Press
/
to adjust the delay time (between 0 ms
96KHz
and 200 ms), and then press ENTER (OK) to confirm
your selection.
Select this to play back discs recorded at the sampling
rate of 96kHz. If the 96kHz disc is copy protected, the
digital output is automatically converted to the
sampling rate of 48kHz.
33 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
When the aspect ratio of your TV is 16:9 (widescreen):
Playback
■ Video setup
TV display
Setting
disc
16:9
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
16:9
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
4:3
*2
*1: If the disc is not assigned to playback with panscan, it is
played with letterbox.
*2: The side of the picture may be stretched depending on the
TV. In this case, check the screen size and aspect ratio of
your TV.
TV type
Progressive function
Use this feature to select a color system that matches
your TV. For details, see “Setting a TV type and
display” on page 19.
This feature is only valid if you have connected this
DVD receiver to a progressive scan TV through the
component video jacks (see “Connecting a TV” on
page 12).
[VIDEO SETUP PAGE] - [TV TYPE]
[VIDEO SETUP PAGE] - [PROGRESSIVE]
Setting the TV display
ON
Set the aspect ratio of this DVD receiver to match your
TV. The format you select must be available on the
disc. Otherwise, the TV display setting will not affect
the picture during playback.
Select this to enable the progressive scan function.
OFF
Select this to disable the progressive scan function.
[VIDEO SETUP PAGE] - [TV DISPLAY]
Notes
4:3 PAN SCAN
–
–
–
Ensure that your TV is equipped with progressive scan.
Connect using a component video cable.
If no picture is displayed, wait for 15 seconds for this
DVD receiver to activate automatic recovery.
Select this if the aspect ratio of your TV is 4:3 and you
want both sides of the picture to be trimmed or
formatted to fit your TV screen.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is 4:3. In this
case, a wide picture with black bands on the upper and
lower portions of the TV screen are displayed.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
VIDEO MONITOR COMPATIBILITY WITH THIS MODEL
525P AND 625P DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
16:9
Select this if you have a widescreen TV.
The following shows the relationship between the
setting of this DVD receiver and the TV display.
When the aspect ratio of your TV is 4:3:
Playback
disc
TV display
Setting
This DVD receiver is compatible with the complete line of
YAMAHA products, including the projectors DPX-1300, DPX-
830 and the plasma monitor PDM-4220.
16:9
*1
4:3 PAN
SCAN
4:3
16:9
4:3
4:3 LETTER
BOX
34 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
Picture settings
If you set the TV type to NTSC, set black level shift to
ON to improve the color contrast during playback.
The black level setting has no effect if the TV type is
set to PAL (see “Setting a TV type and display” on
page 19).
This DVD receiver comes with three predefined sets
of picture color settings and one personal setting that
you can define yourself.
[VIDEO SETUP PAGE] - [PICTURE SETTING]
STANDARD
Select this for the standard picture setting.
[VIDEO SETUP PAGE] - [BLACK LEVEL]
3
ON
BRIGHT
Select this to enhance the black level.
Select this to make the TV picture brighter.
OFF
SOFT
Select this for standard black level setting.
Select this to make the TV picture softer.
PERSONAL
Closed captions
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).
[VIDEO SETUP PAGE] - [PICTURE SETTING]
→ The [PERSONAL PICTURE SETUP] menu
appears.
Closed captions are data hidden in the video signals of
specific discs and are invisible without the use of a
special decoder. The difference between subtitles and
captions is that subtitles are intended for hearing
persons and captions are for the hearing impaired.
Subtitles rarely show all of the audio. For example,
captions show sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles do not.
Before you select this function, please ensure that the
disc contains closed caption information and your TV
set also supports this function.
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
[VIDEO SETUP PAGE] - [CLOSED CAPTION]
COLOR
ON
Select this to enable the closed caption function.
OFF
Select this to disable the closed caption function.
BRIGHTNESS
Increase the value to brighten the picture or vice versa.
Zero (0) is the average brightness setting value.
HDMI setup
CONTRAST
When you have connected this DVD receiver to an
HDMI-compatible component via HDMI jack, adjust
the following menu items to match the video output
capability of this DVD receiver.
Increase the value to sharpen the picture or vice versa.
Zero (0) is the average contrast setting value.
TINT
[VIDEO SETUP PAGE] - [HDMI SETUP]
Increase the value to darken the picture or vice versa.
Zero (0) is the average tint setting value.
COLOR
VIDEO SETUP PAGE
Increase the value to enhance the color in your picture
or vice versa. Zero (0) is the average color setting
value.
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
HDMI SETUP
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
WIDE SCREEN FORMAT SUPERWIDE
HDMI VIDEO
4:3 PILLARBOX
OFF
35 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
[WIDE SCREEN FORMAT]
Adjust the aspect ratio of the projected image on the
screen.
■ Preference setup
SUPER WIDE
PREFERENCE PAGE
AUDIO
Select this to display 16:9 image on the 16:9 screen.
This functions is only available when the input source
is 720p or 1080i.
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
4:3 PILLAR BOX
Select this to display 4:3 image on the 16:9 screen
with a black pillar applied to the left and the right side.
PASSWORD
OFF
No aspect ratio adjustment is made.
[HDMI VIDEO]
Adjust the resolution depending on the connected
component.
These menus contain various language options for the
audio, subtitle and disc menus recorded on the DVD.
For details, see “Setting the audio, subtitle and disc
menu languages” on page 20.
[PREFERENCE PAGE] - [AUDIO], [SUBTITLE], or
[DISC MENU]
480P
480 progressive-scan video.
576P
576 progressive-scan video.
If the language you want is not in the
list:
720P
720 progressive-scan video.
1 Select [OTHERS] from the language options.
1080I
1080 interlace video.
2 Use the numeric keypad (0-9) on the remote
control to enter the 4-digit language code (see “LIST
OF LANGUAGE CODES” at the end of this manual”)
and press ENTER (OK) to confirm your selection.
AUTO
The resolution is automatically selected to match the
component you are using.
Note
Restricting playback with parental
control
Be sure to set [TV TYPE], [WIDE SCREEN FORMAT] and
your component setting to match the selected resolution.
Some DVDs may have a parental level assigned to the
complete disc or to certain scenes on the disc. This
feature lets you set a playback limitation level.
The rating levels are from 1 to 8 and are country
dependent. You can prohibit the playing of certain
discs that are not suitable for your children or play
alternative scenes for certain discs.
[PREFERENCE PAGE] - [PARENTAL]
PREFERENCE PAGE
AUDIO
1 KID SAFE
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC 17
8 ADULT
PASSWORD
36 En
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP MENU OPTIONS
•
•
To disable parental control, and have all discs play,
Playback of VR format
DVDs that are rated above the level you selected do
not play unless you enter the six-digit password. In
that case, use the numeric keypad (0-9) to enter the
six-digit password (see “Changing the password” on
page 38).
There are two ways to play back a disc in VR (Video
Recording) format: ORIGINAL LIST and PLAY
LIST. This feature is not available with non-VR
format discs.
[PREFERENCE PAGE] - [VR LIST]
3
Notes
ORIGINAL LIST
Select this to play the originally recorded titles on the
disc.
–
VCD, SVCD, CD have no level indication, so the parental
control function has no effect with these types of discs.
This also applies to most illegal DVDs.
PLAY LIST
–
Some DVDs are not encoded with a rating though the
movie rating may be printed on the disc cover.
The rating level feature does not prohibit play of such
discs.
Select this to play the edited version of the disc. This
feature is only available when a play list has been
created.
1 Press SET UP to close the setup menu.
2 Press h. The setting you selected begins to play.
To preview VR format
PBC
You can turn on or off PBC. This feature is available
only on Video CD 2.0 with the playback control
(PBC) feature. For details, see “Playback control
(PBC)” on page 24.
3 During playback, press SCAN.
4 Press
/
to highlight either [TITLE DIGEST]
MP3/JPEG navigator
or [TITLE INTERVAL], and then press ENTER
(OK).
MP3/JPEG navigator can be set only if the disc was
recorded with a menu. It allows you to select different
display menus for easy navigation.
TITLE DIGEST
This function display thumbnails of titles on the
screen. A maximum of six thumbnails are displayed
per page.
→ In ORIGINAL LIST mode, the originally recorded
titles on the disc are displayed.
[PREFERENCE PAGE] - [MP3/JPEG NAV]
WITH MENU
Select this to display only the folder menu of the MP3/
Picture CD.
→ In PLAY LIST mode, every title in the play list is
displayed.
WITHOUT MENU
Select this to display all the files contained in the
MP3/Picture CD.
TITLE INTERVAL
This function divides and displays the contents of each
title being played back in regular intervals, making it
easy to preview the recording. A maximum of six
thumbnails are displayed per page.
→ If the title being played back is short, the TITLE
DIGEST function will be performed instead.
Note
For details, see “Preview function” on page 23.
37 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the password
Playing back DivX files with subtitles
The font sets listed below are available for DivX
external subtitle files. You can see the proper font set
on-screen by setting the following options.
The same password is used for both Parental Control
(page 36) and Disc Lock (page 30). Enter your six-
digit password to play a prohibited disc when
prompted on the screen. The default password is ‘000
000’.
[PREFERENCE PAGE] - [DIVX SUBTITLE]
STANDARD
[PREFERENCE PAGE] - [PASSWORD] -
[CHANGE]
Supports the following languages:
Albanian, Breton, Catalan, Danish, Dutch, English,
Faroese, Finnish, French, Gaelic, German, Icelandic,
Irish, Italian, Norwegian, Portuguese, Spanish and
Swedish.
PREFERENCE PAGE
AUDIO
CYRILLIC
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
Supports the following languages:
Bulgarian, Belorussian, English, Macedonian,
Moldavian, Russian, Serbian and Ukrainian.
Note
PASSWORD
CHANGE
Some external subtitle files may not be displayed correctly
or at all.
Press
ENTER (OK)
Restoring to the factory defaults
Setting the DEFAULT function resets all options and
your personal settings to the initial factory settings,
except your password for Parental Control (page 36)
and Disc Lock (page 30).
[PREFERENCE PAGE] - [DEFAULT] - [RESET]
OK
•
Press ENTER (OK) to reset the parameters to the
initial factory settings.
1 Use the numeric keypad (0-9) to enter your old six-
digit password.
•
•
When doing this for the first time, enter ‘000 000’.
If you forget your old six-digit password, enter ‘000
000’.
2 Enter the new six-digit password.
3 Enter the new six-digit password again to confirm the
password.
→ The new six-digit password is now valid.
4 Press ENTER (OK) to confirm your new password.
38 En
Download from Www.Somanuals.com. All Manuals Search And Download.
FM/AM TUNING
FM/AM TUNING
■ Tuning stations
Notes
There are two tuning methods: automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
–
–
Hold down
/
to continue searching.
Switch the FM mode from stereo to mono if the FM
station you have selected has a weak signal.
Each time you press SURR, the front panel display
changes as follows:
–
POWER DIMMER SLEEP POWER
TV
4
Numeric
keypad (0-9)
DOLBY PL II FM STEREO
DOLBY PL II FM MONO
STEREO FM MONO
SCAN PAGE
PROG REPEAT A - B SHUFFLE
PROG
TOP MENU/RETURN
ON SCREEN
CH +
DISPLAY
Cursors
ENTER
CAT
CAT
OK
+
(
/
/
/
)
STEREO FM STEREO
MENU
SRCH
SET UP
CH
s
■ Presetting stations
PRESET
DISC
SKIP
dPRESETu
(b/ a)
SUBTITLE AUDIO ANGLE ZOOM
There are three ways presetting methods: plug and
play, automatic and manual. Use these methods to
store up to 20 FM and 10 AM stations.You can then
recall any preset station easily by selecting the preset
station number.
TRE
TVVOL TV CH
VOL
BASS
EFFECT SURR
TV
MUTE
DOCK
INPUT
TUNER
XM
TV
AUX
TUNER DVD/CD
Note
This DVD receiver will exit presetting mode if no button is
pressed within 20 seconds.
Automatic tuning
Plug and Play
This function enables this DVD receiver to
automatically tuned into FM stations followed by AM
stations with strong signals.
1 Press TUNER repeatedly to select “TUNER/FM” or
“TUNER/AM”.
1 Press TUNER.
2 Press
/
briefly.
→ “AUTO PRESET” and “PRESS PLAY” appears one
after the other if installation has not been completed.
→ “SEARCH” appears, and this DVD receiver
automatically detects the radio stations that have
strong signals for your selection.
2 Press hon the front panel to start installation.
→ “AUTO PRESET” appears.
Manual tuning
1 Press TUNER repeatedly to select “TUNER/FM” or
Notes
–
When tuning is completed, this DVD receiver starts play
the last tuned station.
“TUNER/AM”.
–
If no valid frequency is detected during Plug and Play,
“CHECK ANTENNA” appears.
2 Press
/
to tune into the desired station manually.
To cancel the installation
Before installation is completed, press s.
39 En
Download from Www.Somanuals.com. All Manuals Search And Download.
FM/AM TUNING
Automatic presetting
Deleting a preset radio station
You can select the preset number from which this
DVD receiver will store stations and/or begin tuning
toward lower frequencies.
1 Tune into a station which you want to delete (see
“Tuning stations” on page 39).
2 Press and hold son the front panel until “AM XX
DELTD” or “FM XX DELTD” (XX: preset number)
appears.
1 Press TUNER repeatedly to select “TUNER/FM” or
“TUNER/AM”.
→ The selected station is deleted.
2 Press b/ aor use the numeric keypad (0-9)
to select the preset number under which the first
station will be stored.
3 Press and hold PROG until “AUTO PRESET” appears.
Notes
–
Any stored station data existing under a preset number is
cleared when you store a new station under that preset
number.
–
If no preset number is selected, automatic preset begins
from preset (1) and all former preset will be overwritten.
Manual presetting
You can choose and store only your favorite stations
by manually. Also, if the station you want to store is
weak in signal strength, store it by manually.
1 Tune into a station which you want to store (see
“Tuning stations” on page 39).
2 Press PROG.
3 Press b/ ato select a preset number.
•
Press ato select a higher preset number and press
bto select a lower preset number.
4 Press PROG again to store.
5 Repeat steps 1to 4to store other stations.
Selecting preset stations
You can tune any desired station simply by selecting
the preset number under which it was stored.
•
Press b/ aor use the numeric keypad (0-9)
to select a desired preset number.
→ The station band, preset number, and frequency
appear in the front panel display.
40 En
Download from Www.Somanuals.com. All Manuals Search And Download.
XM® SATELLITE RADIO TUNING
®
XM SATELLITE RADIO TUNING
XM Satellite Radio is the satellite radio service with
millions of listeners across the United States and
Canada, broadcasting live daily. The XM Satellite
Radio channel lineup includes over 160 digital
channels of choice from coast to coast: 67
commercial-free music channels, featuring hip hop to
opera, classical to country, bluegrass to blues; 33
channels of premier sports, talk, comedy, children’s
and entertainment programming; and more than 20
channels of the traffic and weather information for
Because XM Satellite Radio is a subscription service,
you will need to set up an account and activate service
with XM using your XM Satellite Radio ID number.
To check your ID number, follow “Activating XM
Satellite Radio” on page 43. For further information
on XM Satellite Radio services, visit the XM Satellite
regidents in the United States) or
Information from XM Satellite Radio
Inc.
XM monthly service subscription sold separately. XM
Passport and XM Passport Home Dock required to receive
XM service (sold separately). Installation costs and other
fees and taxes, including a one-time activation fee may apply.
Subscription fee is consumer only. All fees and programming
subject to change. Channels with frequent explicit language
are indicated with an “XL”. Channel blocking is available for
XM radio receivers by calling “1-800-XMRADIO
(1-800-967-2346)” (for residents in the United States) or
“1-877-GET-XMSR (1-877-438-9677)” (for residents in
Canada). Subscriptions subject to Customer Agreement
Canada). XM service only available in the 48 continuous
United States and Canada. “XM Ready” is a trademark of
XM Satellite Radio Inc. © 2006 XM Satellite Radio Inc. All
rights reserved.
4
Connecting XM Passport System
Connect XM Passport and XM Passport Home Dock
(sold separately) to the XM jack on the rear panel of
this DVD receiver. For details, see the operating
instructions provided with XM Passport System.
Notes
–
The XM Satellite Radio service is only available in the 48
contiguous United States (not available in Alaska and
Hawaii) and Canada.
–
XM Passport System and monthly subscription are sold
separately. For details, visit the XM Satellite Radio
residents in Canada).
XM Passport and XM
Passport Home Dock
(sold separately)
–
–
For information on obtaining XM Passport System, visit
the XM Satellite Radio website at
Canada), or consult your local retailer that sells XM
Ready products.
To ensure the optimal reception of the XM Satellite Radio
signals, the XM Passport System must be placed at or
near a southerly facing window with no obstacles in the
path to the sky. You can mount it indoors or outdoors.
XM
DOCK
SYSTEM
CONNECTOR
LINE OUT
TO NX-SW300
ANTENNA
41 En
Download from Www.Somanuals.com. All Manuals Search And Download.
XM® SATELLITE RADIO TUNING
3 Cursors (
/
/
/
)
XM Satellite Radio controls and
functions
(All Channel Search mode)
Press CAT– ( )/CAT+ ( ) to change the channel
category.
Note
Press CH+ (
)/CH– (
) to search for a channel
The following controls are available only when “XM
RADIO” is selected as the input source.
within all channels. Press and hold for quick search.
(Category Search mode)
Remote control functions
Press CAT– ( )/CAT+ ( ) to change the channel
category.
POWER DIMMER SLEEP POWER
TV
Press CH+ (
)/CH– (
) to search for the
channel within a selected category. Press and hold for
quick search.
Numeric
keypad (0-9)
SCAN PAGE
PROG REPEAT A - B SHUFFLE
(Preset Search mode)
PROG
TOP MENU/RETURN
ON SCREEN
CH +
Press CH+ (
channel number.
)/CH– (
) to change the preset
DISPLAY
Cursors
DISPLAY
ENTER
CAT
CAT
(
/
/
/
),
OK
+
ENTER (OK)
Press ENTER (OK) to confirm an entered channel
number.
ENTER (OK)
MENU
SRCH
SET UP
CH
SRCH
PRESET
DISC
SKIP
dPRESETu
(b/ a)
4 SRCH
SUBTITLE AUDIO ANGLE ZOOM
Changes the search mode between the All Channel
Search, Category Search, and Preset Search modes.
TRE
TVVOL TV CH
VOL
BASS
5 DISPLAY
EFFECT SURR
TV
MUTE
DOCK
INPUT
Displays the XM Satellite Radio information such as
channel number, channel name, category, artist name,
or song title displayed in the front panel display.
XM
TV
AUX
TUNER DVD/CD
XM
6 XM
Selects “XM RADIO” as the input source.
1 Numeric key pads
(All Channel Search or Category Search mode)
Use 1 to 9 and 0 to enter a channel number directly.
(Preset Search mode)
Use 1 to 9 and 0 to enter a preset channel directly.
2 PROG
Stores a preset channel in the memory.
42 En
Download from Www.Somanuals.com. All Manuals Search And Download.
XM® SATELLITE RADIO TUNING
■ Activating XM Satellite Radio
To sign up for an account with the XM Satellite Radio
service, an XM Satellite Radio ID number is required.
Follow the procedure below to check your ID number,
and then visit the website or call toll-free with a major
credit card handy for signing up.
■ Basic XM Satellite Radio
operations
1 Press XM repeatedly until “XM RADIO” appears in
the front panel display.
2 Press DISPLAY.
For residents in the United States
Toll-free: 1-800-XM-RADIO (1-800-967-2346)
→ The XM Satellite Radio information (such as
or song title) for the currently selected channel
appears in the front panel display.
For residents in Canada
activation.jsp
4
3 Search for a channel by using one of the XM Satellite
Radio search modes (see page 44).
Toll-free: 1-877-GET-XMSR (1-877-438-9677)
1 Press XM repeatedly until “XM RADIO” appears in
Notes
the front panel display.
–
receiver automatically recalls the previously selected
channel.
The XM Satellite Radio signals can be output at the LINE
OUT jacks.
You can set the XM Satellite Radio preset channels (see
page 45).
You can display the XM Satellite Radio information in
the front panel display (see page 45).
2 Press and hold DISPLAY to check the XM Satellite
Radio reception level.
–
–
–
→ “ANTENNA XX” appears (XX: reception level,
0 to 100%).
Check the XM Satellite Radio reception level and
adjust the orientation of XM Passport System for a
better percentage of the reception level.
•
Note
If “ANTENNA” appears in the front panel display, the XM
Passport System may not be connected to the XM jack on the
rear panel of this DVD receiver properly. See “Connecting
XM Passport System” on page 41 and check the connection.
3 Press CH+ (
)/CH– (
) to select channel “0”.
few seconds, and then the Radio ID number appears.
Note
You cannot select channel “0” if the All Channel Search
mode (see page 44) is not selected.
4 Check the XM Radio Satellite Radio ID number
displayed in the front panel display and write it down.
ID:_____________________________________
43 En
Download from Www.Somanuals.com. All Manuals Search And Download.
XM® SATELLITE RADIO TUNING
■ Selecting the XM Satellite Radio
Preset Search mode
1 Press XM repeatedly until “XM RADIO” appears in
search mode
You can search for the desired channel using one of
the three search modes (All Channel Search, Category
Search, and Preset Search modes). You can also enter
the channel number directly to select the desired
channel by using the Direct Number Access mode.
the front panel display.
2 Press SRCH repeatedly to select “PRESET
SEARCH”.
3 Press CH+ (
)/CH– (
) repeatedly to change the
All Channel Search mode
preset channel number (1 to 40).
1 Press XM repeatedly until “XM RADIO” appears in
Note
the front panel display.
You can also select the preset channel number (1 to 40)
directly by pressing the numeric key pads on the remote
control.
2 Press SRCH repeatedly to select “ALL CH
SEARCH”.
3 Press CAT– ( )/CAT+ ( ) repeatedly to change the
Direct Number Access mode
1 Press XM repeatedly until “XM RADIO” appears in
channel category.
4 Press CH+ (
)/CH– (
) repeatedly to search for
the front panel display.
a channel within all channels.
2 Press SRCH repeatedly to select “ALL CH
SEARCH” or “CAT SEARCH”.
Category Search mode
3 Press the numeric key pads on the remote control
1 Press XM repeatedly until “XM RADIO” appears in
to enter the up to three-digit channel number.
the front panel display.
Notes
2 Press SRCH repeatedly to select “CAT SEARCH”.
–
If no button is pressed within three seconds after you
enter one-digit or two-digit number, this DVD receiver
automatically recognizes the number you have entered
(one-digit or two-digit number) as the channel number.
Pressing a button other than the numeric key pads
cancels the Direct Number Access mode procedure.
3 Press CAT– ( )/CAT+ ( ) repeatedly to change the
channel category.
–
4 Press CH+ (
)/CH– (
) repeatedly to search for
a channel with the selected channel category.
44 En
Download from Www.Somanuals.com. All Manuals Search And Download.
XM® SATELLITE RADIO TUNING
■ Displaying the XM Satellite Radio
preset channels
information
You can use this feature to store up to 40 XM Satellite
Radio channels. You can then recall any preset
channel easily by selecting the preset channel number
You can display the XM Satellite Radio information
(such as channel number, channel name, category,
artist name, or song title) for the currently selected
1 Search for a channel you want to set as a preset
channel by using one of the XM Satellite Radio search
modes.
Note
If a status message or an error message appears in the front
panel display, see the “XM Satellite Radio” section in
“TROUBLESHOOTING” on page 49 for appropriate
remedies.
See “Selecting the XM Satellite Radio search mode”
on page 44.
4
2 Press PROG.
“PRESET” appears in the front panel display for
approximately 5 seconds.
Displaying the XM Satellite Radio
information in the front panel display
•
Press DISPLAY repeatedly to toggle between the
following XM Satellite Radio information display
modes.
Note
You must proceed to and carry out steps 3through 4while
the “PRESET” indicator is flashing in the front panel display
Channel number / name
Channel category
Artist name
3 Press CH+ (
)/CH– (
) repeatedly to select the
desired preset number (1 to 40) or use the numeric
key pads to select the preset number directly.
→ “<CH> XX” appears (XX: preset number).
4 Press PROG again to store the currently selected
channel into the selected preset number.
→ “XX[channel number][channel name]” appears
(XX: preset number).
Song title
Note
The front panel display can indicate up to 11 alphanumeric
characters at once. If the information contains more than 11
characters, all the characters are scrolled once, and then the
first 11 characters remain in the front panel display.
Note
If PROG is not pressed within 5 seconds after you enter the
preset number in step 3, this DVD receiver will
automatically cancel the programing, and the last tuned
station will be restored.
Deleting a preset station
1 Tune into a station which you want to delete by
selecting the preset number under which it was stored.
2 Press and hold son the front panel or on the remote
control.
→ “<CH> XX DELTD” appears in the front panel
display (XX: preset number). If no preset number is
available, “<CH> 0 DELTD” appears in the front
panel display.
45 En
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND CONTROLS
■ Adjusting the treble/bass level
Note
The treble (high tone) and bass (low tone) features
enable you to define the sound-processor settings.
For proper surround sound, make sure the speakers and
subwoofer are connected to this DVD receiver (see “Speaker
connections” on page 10).
1 Press TRE or BASS on the remote control.
TRE/BASS
2 Within five seconds, press VOL (+/–) to adjust the
treble or bass level (MIN, –2, –1, 0, +1, +2 or MAX).
→ If the VOL (+/–) is not adjusted within 5 seconds,
this DVD receiver automatically cancel the
adjustments.
VOL (+/–)
TRE
TVVOL TV CH
VOL
BASS
MUTE
SURR
EFFECT SURR
TV
MUTE
DOCK
INPUT
EFFECT
XM
TV
AUX
TUNER DVD/CD
■ Adjusting the volume
•
Use the VOLUME control on the front panel or press
VOL (+/–) on the remote control to increase or
decrease the volume level.
→ “VOL MIN” appears at the minimum volume level
and “VOL MAX” appears at the maximum volume
level.
■ Selecting surround sound
•
Press SURR repeatedly to select MULTI-CHANNEL
or STEREO.
Note
The availability of the various surround sound modes
depends on the number of speakers used and the sound
available on the disc.
You can continuously increase or decrease the volume level if
you press and hold VOL (+/–).
The center and surround speakers operate only in
multi-channel surround mode.
Stereo broadcasts or recordings produce some
surround channel effects when played in a surround
mode. However, mono (single channel sound) sources
do not produce any sound from the surround speakers.
■ Muting the sound
1 Press MUTE on the remote control to mute the sound.
→ “MUTE” appears in the front panel display.
2 Press MUTE on the remote control again or press
VOL (+/–) to resume the sound output.
■ Selecting digital sound effects
You can select preset digital sound effects that match
the content of your disc, or that optimize the sound of
the musical style you are playing.
•
Press EFFECT to select from the available sound
effects.
When playing back movie discs or while
in TV mode:
“CONCERT”, “DRAMA”, “ACTION” or “SCI-FI”.
When playing back music discs or in
TUNER, AUX or iPod mode:
“ROCK”, “DIGITAL”, “CLASSIC” or “JAZZ”.
Notes
– Digital sound effects and the treble/bass features
cannot be activated at the same time.
– For flat sound output, select “CONCERT” or
“CLASSIC”.
46 En
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
REMOTE CONTROL FEATURES
In addition to controlling this DVD receiver, the
Operating your TV
Press TV for your TV operations.
remote control can also operate the other A/V
components made by YAMAHA and other
manufacturers. To control other components, you must
set up the remote control with the appropriate remote
control codes.
•
POWER (TV)*
Turns on or off the power of your TV.
TV VOL (+/–)*
Adjusts the audio output level of your TV.
Note
Depending on the external A/V component you are using,
you may not be able to operate the component with the
remote control, even if a remote control code is set. In this
case, operate the component using the supplied remote
control.
TV INPUT*
Switches the input source for the TV.
5
Numeric keypad (0-9)
Selects a TV channels for playback.
TV CH (+/–)*
Switches between the available TV channels.
■ Setting remote control codes
Set a TV remote control code for TV and set a cable or
satellite tuner remote control code for AUX.
*You can also operate these functions in DVD/CD or
TUNER mode.
POWER DIMMER SLEEP POWER
TV
POWER (TV)
Operating your cable and satellite
tuner
Numeric
keypad (0-9)
SCAN PAGE
PROG REPEAT A - B SHUFFLE
•
Press AUX for your cable and satellite tuner
operations.
PROG
TOP MENU/RETURN
ON SCREEN
CH +
DISPLAY
ENTER (OK)
ENTER
POWER (TV)
CAT
CAT
OK
+
Turns on or off the power of your cable or satellite
tuner.
MENU
SRCH
SET UP
CH
ENTER (OK)
PRESET
DISC
SKIP
Confirms a selection.
SUBTITLE AUDIO ANGLE ZOOM
TV CH (+/–)
AUX
Numeric keypad (0-9)
TRE
TV VOL (+/–)
TVVOL TV CH
VOL
Cable: enters a number of a cable channel.
Satellite tuner: enters a number of a preset radio
station.
BASS
EFFECT SURR
TV
TV INPUT
TV
MUTE
DOCK
INPUT
XM
TV
AUX
TUNER DVD/CD
TV CH (+/–)
Switches between the available cable or satellite tuner
channels.
1 Press and hold TV or AUX.
2 Press PROG, and then release both keys.
3 Press the numeric keypad (0-9) to enter the 4 digit
remote control codes (see “LIST OF REMOTE
CONTROL CODES” at the end of this manual).
4 Press PROG again to store.
47 En
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
■ Dimming the display screen
Use to adjust the brightness of the front panel display.
•
Press DIMMER repeatedly to select the desired
brightness from the following options:
DIM 1: 70% brightness
DIM 2: 40% brightness
DIM OFF: normal brightness
To cancel the dimmer settings
•
Press DIMMER repeatedly to select “DIMMER
OFF”.
→ “DIMMER OFF” appears in the front panel
display.
■ Setting the sleep timer
Use this feature to automatically set this DVD receiver
to the standby mode after a specified time period. The
sleep timer is useful if you are going to sleep after a
certain amount of time while this DVD receiver is still
playing back a source.
1 Press SLEEP repeatedly to set the amount of time for
sleep timer.
→ “SLEEP XX” appears in the front panel display
(XX: 15, 30, 45, 60 or OFF).
2 Wait for few seconds without operating this DVD
receiver to confirm the setting for the sleep time.
→ “SLEEP” appears in the front panel display.
→ Countdown of 10 seconds is displayed before this
DVD receiver switches to standby mode.
“SLEEP 10” → “SLEEP 9”.... →
“SLEEP 2” → “SLEEP 1”
To cancel the sleep timer
•
Press SLEEP repeatedly to select “SLEEP OFF”.
→ “SLEEP OFF” appears in the front panel display.
48 En
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the table below when this DVD receiver does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off this DVD receiver, disconnect the power cable, and contact
the nearest authorized YAMAHA dealer or service center.
General
Problem
Solution
No power
No picture
Check if the AC power cord is properly connected.
Press STANDBY/ON on the front panel of this DVD receiver to turn on the
power.
Refer to your TV’s manual for correct Video In channel selection. Change
the TV channel until you see the DVD screen.
Press DVD/CD on the remote control in order to switch to DVD/CD mode.
Completely distorted picture or
black/white picture
If this happens when you are changing the setting of the ‘TV TYPE’, wait
for 15 seconds for auto recovery.
If this happens when you are turning on the progressive scan feature, wait
for 15 seconds for auto recovery.
6
Check the video connection.
Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
Clean a disc.
The aspect ratio of the screen cannot be charged
even though you have set the TV display
The aspect ratio is fixed on the DVD disc.
Depending on the TV, it may not be possible to change the aspect ratio.
Adjust the volume.
No sound or distorted sound
Check if the system cable is properly connected.
Check if all speaker cables are properly connected.
Make sure that the audio cables are connected and press the input selection
buttons to select the correct input source (TV or AUX, for example) to
choose the equipment that you want to hear through the DVD receiver.
Check if the AC power cord of the subwoofer is properly connected.
Make sure that you use a disc supported by the DVD receiver.
Check if all cables are properly connected.
Sound is too low on one side
Cannot activate some features such as Angles,
Subtitles, or multi-language Audio
The features may not be available on the DVD receiver.
Changing the language for the sound or subtitle is prohibited on the DVD.
DVD videos cannot be copied with the VCR
Some DVDs are copy protected. You cannot record copy-protected discs
using a VCR.
The disc is ejected without an operation
Make sure that you use a disc supported by the DVD receiver.
Press STOP twice before selecting the setup menu.
Not able to select some items in the setup menu
Depending on the disc, some menu items are not available.
The DVD receiver does not start playback
Insert a readable disc with the playback side facing down. The DVD-R/
DVD+R/DVD-RW/DVD+RW/CD-R/CD-RW/DVD-RW (VR format) must
be finalized.
Check the disc type, color system (PAL or NTSC) of your TV and region
code of the disc.
Check for any scratches or smudges on the disc.
Press SET UP to turn off the setup menu screen.
You may need to enter the password in order to change the parental control
rating level or to unlock the disc for playback.
Moisture has condensed inside the DVD receiver. Remove the disc and
leave this DVD receiver turned on for about an hour.
49 En
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Solution
A source cannot be recorded by an analog
component connected to the DVD receiver
Connect the source component to the LINE OUT jacks of the DVD receiver.
Sounds played on the AV equipment connected to Connect those equipment to the DVD receiver with analog connections.
the DVD receiver cannot be recorded with external
recording equipment
The volume does not increase or sounds are
distorted
Turn on the power of the component connected to the DVD receiver.
There is no sound from the center, surround
speakers and subwoofer
Make sure the center, surround speakers and subwoofer are connected correctly.
Adjust the volume level in the setup menu.
Press SURR button to select a correct surround sound setting.
Make sure the source you are playing is recorded or broadcast in surround
sound (DTS, Dolby Digital, etc.).
“SPEAKER ERR” appears in the display panel
Unplug the subwoofer, then make sure the front, center and surround speakers
are connected correctly.
Set the DVD receiver to the standby mode, then disconnected the power cord.
Wait for about 30 seconds, then reconnect the power cord and turn on the DVD
receiver.
®
®
®
Unable to play DivX movies
Check that the DivX file was encoded in ‘Home Theater’ mode with a DivX
5.x encoder.
The DVD receiver does not work
Disconnect the power cord from the power outlet for a few minutes. Reconnect
the power cord and try to operate again as usual.
Remote control
Problem
Solution
The remote control does not work for operating
other equipment
Set the correct remote control code. Depending on the model and year of the
product, the DVD receiver’s remote control may not be able to operate it partly
or wholly. In this case, use the remote control supplied with each product.
The remote control does not function properly
Select the source (DVD/CD or TUNER, etc.) before pressing the function
button (h, b/ a).
Reduce the distance between the remote control and this DVD receiver.
Replace the batteries with new ones.
50 En
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Tuner
Problem
Solution
Radio reception is poor
If the signal is too weak, adjust the antenna or connect an external antenna for
better reception.
Increase the distance between this DVD receiver and your TV or VCR.
Tune in to the correct frequency.
Place the antenna farther away from any equipment that may be causing the
noise.
XM Satellite Radio
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, follow the corresponding solutions.
Status message
Solution
Check the XM Passport System connections and orient it for the best reception
level
"ANTENNA"
"UPDATING"
"NO SIGNAL"
"LOADING"
"OFF AIR"
6
The XM user encryption code is being updated. Wait until the encryption code
is updated.
Check the XM Passport System connections and orient it for the best reception
level.
If it takes longer than four seconds for audio or text data to be decoded, wait
until the decoding process has finished
Check the channel number again or select another XM Satellite Radio channel
due to the XM Satellite Radio channel you selected is not currently
broadcasting any signals.
The Channel Station ID (SID) is no longer available.
No artist name or song title is available.
"<XM> - - -"
"- - - - -"
No channels are available for the selected category. Select another channel
category by pressing CAT– ( )/CAT+ ( ) on the remote control repeatedly.
"CAT - - -"
51 En
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
GLOSSARY
Analog
Dolby Digital
Sound that has not been turned into numbers.
Analog sound varies, while digital sound has specific
numerical values. These jacks send audio through two
channels, the left and right.
Digital surround sound system which is developed by
Dolby Laboratories provides completely independent
multi-channel audio. With 3 front channels (left, center,
and right) and 2 surround stereo channels, Dolby
Digital provides five full-range audio channels. With
an additional channel especially for bass effects (called
LFE, or low frequency effect), the system has a total of
5.1-channels (LFE is counted as 0.1 channel). By using
2-channel stereo for the surround speakers, more
accurate moving sound effects and surround sound
environment are possible than with Dolby Surround.
Aspect ratio
Horizontal and vertical ratio of a displayed image. The
horizontal vs. vertical ratio of conventional TV is 4:3,
and that of wide-screens is 16:9.
Bit
Short for binary digit. Represents the smallest unit of
information manipulated on a computer. In audio
systems, the bit size determines resolution to digitize
analog signals.
The larger the bit size, the larger the dynamic range
(the ratio of maximum and minimum frequency level)
and the finer the sounds. Generally, an audio CD is 16
bit and DVD audio is 24 bit.
Dolby Surround Pro Logic II
It is an improved matrix decoding technology that
provides better spatiality and directionality on Dolby
Surround programme material; provides a convincing
three-dimensional soundfield on conventional stereo
music recordings; and is ideally suited to bring the
surround experience to automotive sound. While
conventional surround programming is fully
compatible with Dolby Surround Pro Logic II
decoders, soundtracks will be able to be encoded
specifically to take full advantage of Pro Logic II
playback, including separate left and right surround
channels. (Such material is also compatible with
conventional Pro Logic decoders.)
Bit rate
The amount of data used to hold a given length of
music; measured in kilobits per second, or kbps. Also,
the speed at which you record. Generally, the higher
the bit rate, or recording speed, the better the sound
quality. However, higher bit rates use more space on a
disc.
DTS (Digital Theater Systems)
COMPONENT VIDEO OUT
Digital surround sound system developed by Digital
Theater Systems, Inc., which provides 5.1 channel
audio (max). With an abundance of audio data, it is
able to provide authentic-sounding effects.
Jacks for inputting or outputting a component video
signal.Component video signal consists of three lines,
the luminance signal (Y) and two color difference
signals (P /C , P /C ), which enable to provide high-
B
B
R
R
quality video.
Interlace
The most common type of scanning used in televisions.
It divides a screen into even and odd numbered fields
for scanning, and then builds an image by combining
them into one image (frame).
DivX
DivX is a popular media technology created by DivX,
inc. DivX media files contain highly compressed video
with high visual quality that maintains a relatively
small file size. DivX files can also include advanced
media features like menus, subtitles, and alternate
audio tracks. Many DivX media files are available for
download online, and you can create your own using
your personal content and easy-to-use tools from
DivX.com.
JPEG (Joint Photographic Expert Group)
A standardized image compression system proposed by
the Joint Photographic Expert Group. It can reduce
image data sizes to 1 to 10% of their original sizes, and
works on digital photographs effectively.
52 En
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
MP3 (MPEG Audio Layer-3)
Super Audio CD
An audio file compression technology. It can reduce
audio data sizes to about 10% of their original sizes
while maintaining CD-level audio quality.
Audio format based upon the current CD standards but
includes a greater amount of information that provides
higher quality sound. There are three types of discs:
single layer, double layer and hybrid discs. The hybrid
disc can be played on existing CD players as well as
Super Audio CD players since it contains both standard
audio CD and Super Audio CD information.
MPEG (Moving Pictures Experts Group)
International standard for digital video and audio
compression generated by ISO (International
Organization for Standardization) and IEC
(International Electrotechnical Commission).
Includes MPEG-1, MPEG-2, and MPEG-3. MPEG-1
offers VHS level video quality and is often used on
video CDs. MPEG-2 offers S-VHS level video quality
and is often used on DVDs.
Super Audio CD Disc
Hybrid layer disc
Dual layer disc
Single layer disc
HD layer
HD layer
CD layer
HD layer
Parental control
Limits Disc play according to the age of the users or
the limitation level in each country. The limitation
varies from disc to disc; when it is activated, playback
will be prohibited if the software’s level is higher than
the user-set level.
Hybrid Super Audio CD Disc
6
CD layer that plays on any
CD player
1
Playback control (PBC)
An on-screen menu recorded on a Video CD or SVCD
that enables interactive playback and searching.
High Density layer containing:
- High Quality DSD Stereo
2
- High Quality DSD Multi-
channel
3
Progressive Scan
A method of displaying all scanning lines in a frame at
once, reducing flicker noticeable on a larger screen and
creating a sharp and smooth image.
Surround
A receiver for creating realistic three-dimensional
sound fields full of realism by arranging multiple
speakers around the listener.
Region code
Many DVD discs include a region code so that the
copyright owner can control DVD software distribution
only to regions where they are ready to
distribute. There are six regions codes, which restrict a
DVD receiver to playing a DVD disc with the same
region code.
VR format (Video Recording format)
A DVD video recording format, which allows editing
DVD video data recorded onto a disc. You need a VR
format compatible player for playback.
S-video output
A jack for inputting or outputting an S-video signal.
S-video signal consists of two lines, the luminance
signal (Y) and color signal (C), which enable to
provide high-quality video during playback or
recording.
53 En
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
SPECIFICATIONS
DVD RECEIVER (DVR-C310)
FRONT SPEAKER (NX-F300)
System
2-way, Bass Reflex System
TUNER SECTION
Impedance
6 Ω
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
6.5 cm (2.5”) woofer + 2.5 cm (1”)
100 Hz 20 Hz – 20 kHz
83 x 181 x 78 mm
0.7 kg
FM Tuning Range
AM Tuning Range
87.50 to 108.00 MHz
530 to 1700 kHz
DISC SECTION
Laser Type
Semiconductor
12 cm/8cm
CENTER SPEAKER (NX-C300)
Disc Diameter
Video Decoding
Video DAC
Signal System
Video Format
System
2-way, Bass Reflex System
MPEG-1/MPEG-2/DivX® 5,DivX® 4, DivX® 3
Impedance
6 Ω
12 bits/108 MHz
PAL/NTSC
4:3/16:9
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
6.5 cm (2.5”) Full range x 2 + Piezo
100 Hz 20 Hz – 20 kHz
298 x 84 x 78 mm
1.1 kg
Composite Video Output
S-video Output
1.0 Vp-p, 75 Ω
Y - 1.0 Vp-p, 75 Ω
C - 0.3 Vp-p, 75 Ω
SURROUND SPEAKER (NX-S300)
Component Video Output Y - 1.0 Vp-p, 75 Ω
PB/CB PR/CR – 0.7 Vp-p, 75 Ω
24 bits/192 kHz
System
2-way, Bass Reflex System
Impedance
6 Ω
Audio DAC
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
6.5 cm (2.5”) Full range + Piezo
100 Hz 20 Hz – 20 kHz
83 x 181 x 78 mm
0.6 kg
Frequency Response
4 Hz – 20 kHz (44.1 kHz)
4 Hz – 22 kHz (48 kHz)
4 Hz – 44 kHz (96 kHz)
105 dB
Audio S/N
Distortion
Dynamic Range
0.0035%
95 dB
SUBWOOFER (NX-SW300)
Power Supply Rating
Power Consumption
System
120 V, 60 Hz
360 W
AUDIO FORMAT
Bass Reflex System
Digital
Dolby Digital/DTS/
MPEG
PCM
Compressed Digital
16, 20, 24 bits
fs 44.1, 48, 96 kHz
24, 32, 56, 64, 96, 128, 256 kbps
fs 16, 22.05, 24, 32, 44.1, 48 kHz
Impedance
6 Ω
Speaker Driver
Frequency Response
Dimensions (W x H x D)
Weight
16 cm (6 1/2”) woofer
40 Hz – 100 20 Hz
178 x 402 x 461 mm
12 kg
MP3 (ISO 9660)
WMA
32 to 192 kbps, mono, stereo
Full decoding of Dolby Digital and DTS multi-channel sound
Dolby Surround Compatible Downmix from Dolby Digital
multi-channel sound
Amplifier Section
Output Power
- Front
Dolby Pro Logic II
150 W RMS (10% THD, 1 kHz)/channel
150 W RMS (10% THD, 1 kHz)/channel
150 W RMS (10% THD, 1 kHz)
- Surround
- Center
GENERAL
- Subwoofer
150 W RMS (10% THD, 100 Hz)
Power Supply
120 V, 60 Hz
Power Consumption
Frequency Response
20 W
20 Hz to 20 kHz/–3 dB
(Front, Center, Surround)
> 100 dB
Signal-to-Noise Ratio
Input Sensitivity
- AUX In, TV In
Dimensions (W x H x D)
Weight
Specifications subject to change without prior notice.
300 mV
435 x 75 x 434 mm
5.6 kg
54 En
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF LANGUAGE CODES / LISTE DE CODES DE LANGUES
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja 7889
Chichewa; Chewa; Nyanja 7889
Chinese
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Frisian
7089
7168
7176
7565
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7368
Lithuanian
Luxembourgish
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
7684
7666
7775
7771
7783
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Gaelic; Scottish Gaelic
Gallegan
Georgian
German
Gikuyu; Kikuyu
Greek
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Indonesian
Interlingua (International) 7365
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmål; Bokmål 7866
Norwegian Nynorsk 7878
Nyanja; Chichewa; Chewa 7889
Nynorsk, Norwegian 7878
Occitan (post 1500); Proven 7967
Old Bulgarian; Old Slavonic 6785
Old Church Slavonic; Old 6785
Old Slavonic; Church
Oriya
9072
9065
6785
Chuang; Zhuang
Church Slavic; Slavonic
Church Slavonic; Church 6785
Chuvash
Cornish
Corsican
Croatian
Czech
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provençal; Occitan (post) 7967
Pushto
Quechua
Raeto-Romance
Romanian
Rundi
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
8083
8185
8277
8279
8278
8285
Letzeburgesch;
Limburgan; Limburger
Limburger; Limburgan
Limburgish; Limburger
Lingala
Finnish
French
Russian
LIST OF REMOTE CONTROL CODES / LISTE DES CODES DE COMMANDE
1018, 1020, 1021, 1022
1053
1009, 1016, 1023, 1032,
1039, 1079, 1083, 1084
1009
1063
1008, 1009
1009, 1015, 1016, 1039,
1050, 1051, 1052, 1053,
1065, 1070, 1080, 1083,
1084
1076, 1077
1026, 1055, 1056, 1082
1024, 1053
1015, 1021, 1036
1063, 1069, 1076
1044
1003, 1009, 1010, 1011,
1016, 1017, 1018, 1021,
1022, 1040, 1051, 1090
1047
1011, 1032, 1051
1044
TV
Yamaha
Admiral
Aiko
Akai
Alba
CXC
Daewoo
Grundig
Harvard
Hitachi
ICE
Itt/Nokia
JC Penny
Nikko
Nokia
1009, 1011, 1036, 1068
1033, 1080
1032
Nordmende 1035, 1057, 1058, 1071
Daytron
Dual
Dumont
Emerson
NTC
Oceanic
Onwa
1062
1044, 1061
1053
1011
1005, 1013, 1014, 1064,
1076
1009, 1011
Panasonic 1018, 1043, 1068, 1086
AOC
Philco
1009, 1011, 1020, 1036,
1080
1014, 1020
1009, 1011, 1016
1015, 1046, 1049, 1085,
1086
1009, 1016, 1032
1018, 1045, 1068
Audiovox 1032, 1053, 1079, 1083
Belcor 1009
Bell & Howell 1007, 1039
JVC (Victor) 1013, 1019, 1025, 1042
Kendo 1014
Kenwood 1009, 1011
1011, 1016, 1053
1029
Magnavox 1011, 1013, 1020, 1052
Philips
Pilot
Pioneer
Envision
Ferguson
1011
Blaupunkt 1055, 1056, 1059, 1082
1004, 1014, 1028, 1035,
1054, 1066, 1071
1005, 1062, 1063, 1067,
1072, 1074
KTV
Loewe
Blue sky
Bradford
Brandt
Brokwood 1009
Bush
1064
1053
1035, 1057, 1058
First line
Portland
Quasar
Marantz
Matsui
1011, 1014, 1020
1005, 1012, 1013, 1014,
1027, 1060, 1063, 1072,
1076
Fisher
Funai
1039
Radio Shack 1009, 1011, 1016,
1017, 1021, 1038, 1044,
1049, 1051
1005, 1013, 1014, 1064,
1070, 1072, 1076, 1077
1011, 1021
1030, 1067, 1075
1053
1043, 1053
1048, 1052, 1053, 1069
Futuretec 1053
Candle
Clatronic
Contec
Craig
Croslex
Crown
GE
1010, 1017, 1018, 1033,
1051, 1070, 1079, 1088,
1090
MGA
1009, 1011, 1037, 1049
RCA
1009, 1015, 1017, 1018,
1031, 1033, 1087, 1088,
1089, 1090, 1091
1009, 1011, 1016, 1021,
1039, 1045, 1051, 1053
1029, 1035, 1044,
Mitsubishi 1009, 1033, 1034, 1038,
1081
Gibralter
1008, 1009, 1011
MTC
1009, 1011, 1021, 1022,
1062, 1081
1053
Realistic
SABA
1020
1016, 1053, 1078
LG/Goldstar 1002, 1003, 1009, 1011,
1014, 1016, 1021, 1052
Goodmans 1013, 1014, 1027, 1063,
Multitec
NEC
Curtis Mathis 1007, 1011, 1016, 1017,
1009, 1011, 1013, 1021,
1057, 1058, 1071
Download from Www.Somanuals.com. All Manuals Search And Download.
|