Yamaha DVD Player DVD S659BL User Manual

U
DVD PLAYER  
LECTEUR DE DVD  
DVD-S659  
HDMI  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC INFORMATION (for US customers)  
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!  
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications  
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.  
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.  
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void  
your FCC authorization to use this product in the USA.  
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class  
“B” digital devices.  
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential  
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio  
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference  
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference  
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning  
the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:  
Relocate either this product or the device that is being affected by the interference.  
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change  
the lead-in to coaxial type cable.  
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this  
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe  
Ave. Buena Park, CA90622.  
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.  
We Want You Listening For A Lifetime  
YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your  
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or  
distortion - and, most importantly, without affecting your sensitive hearing.  
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries  
Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.  
SECURITE LASER  
L’appareil utilise un laser. En raison des risques de  
blessure des yeux, le retrait du couvercle ou les  
réparations de l’appareil devront être confiés  
exclusivement à un technicien d’entretien qualifié.  
DANGER  
Risque d’exposition au laser en cas d’ouverture.  
Eviter toute exposition au faisceau.  
Lorsque cet appareil est branché à la prise de  
AVOID DIRECT EXPOSURE TO THE BEAM  
DANGER:  
INVISIBLE LASER RADIATION WHEN OPEN  
DO NOT STARE INTO BEAM  
INVISIBLE LASER RADIATION WHEN OPEN  
CAUTION:  
courant, ne pas approcher les yeux de l’ouverture  
du plateau changeur et des autres ouvertures  
pour regarder à l’intérieur.  
SEGURIDAD CONTRA LA RADIACIÓN  
LÁSER  
Esta unidad utiliza rayos láser. Debido a la  
posibilidad de que se produzcan daños en los ojos,  
la extracción de la cubierta de la unidad o las  
LASER SAFETY  
This unit employs a laser. Due to possible eye  
injury, only a qualified service person should  
remove the cover or attempt to service this device.  
PELIGRO  
Esta unidad emite radiación láser visible cuando se  
abre. Evite la exposición directa a los rayos láser.  
Cuando esta unidad esté enchufada a una toma  
de corriente, no ponga sus ojos cerca de la  
abertura de la bandeja del disco ni otras aberturas  
para mirar al interior.  
DANGER  
This unit emits visible laser radiation when open.  
Avoid direct eye exposure to beam.  
When this unit is plugged into a wall outlet, do not  
place your eyes close to the opening of the disc  
tray and other openings or look inside.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.  
1
2
To assure the finest performance, please read this  
manual carefully. Keep it in a safe place for future  
reference.  
15 Be sure to read the “Troubleshooting” section on  
common operating errors before concluding that  
this unit is faulty.  
16 Before moving this unit, press STANDBY/ON to  
set the unit in standby mode, and then disconnect  
the AC power plug from the wall outlet.  
17 Install this unit near the AC wall outlet and where  
the AC power plug can be reached easily.  
Install this unit in a well ventilated, cool, dry, clean  
place — away from direct sunlight, heat sources,  
vibration, dust, moisture, or cold. In a cabinet,  
allow about 2.5cm (1 inch) of free space all  
around this unit for adequate ventilation.  
Locate this unit away from other electrical appliances,  
motors, or transformers to avoid humming sounds.  
Do not expose this unit to sudden temperature  
changes from cold to hot, nor locate this unit in  
an environment with high humidity (i.e., a room  
with a humidifier) to prevent condensation inside  
this unit, which may cause an electrical shock, fire,  
damage to this unit, and/or personal injury.  
Avoid installing this unit where foreign objects  
may fall onto this unit and/or this unit may be  
exposed to liquid dripping or splashing. On the  
top of this unit, do not place:  
3
4
This unit is not disconnected from the AC power  
source as long as it is connected to the wall outlet,  
even if this unit itself is tuned off. This is called the  
standby mode. In this state, this unit is designed to  
consume a very small quantity of power.  
FOR CANADIAN CUSTOMERS  
To prevent electric shock, match wide blade of plug  
to wide slot and fully insert.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
5
– Other components, as they may cause damage  
and/or discoloration on the surface of this unit.  
For Customer Use:  
Read carefully the information located at the rear  
panel of this unit and enter below the Serial No.  
Retain this information for future reference.  
Burning objects (i.e., candles), as they may cause  
fire, damage to this unit, and/or personal injury.  
– Containers with liquid in them, as they may fall,  
spilling the liquid and causing an electrical  
shock to the user and/or damage to this unit.  
Do not cover this unit with a newspaper, tablecloth,  
curtain, etc. in order not to obstruct heat radiation.  
If the temperature inside this unit rises, it may cause  
fire, damage to this unit, and/or personal injury.  
Do not plug in this unit to a wall outlet until all  
connections are complete.  
Do not operate this unit upside-down. It may  
overheat, possibly causing damage.  
Do not use excessive force on switches, knobs  
and/or cords.  
Model No.  
Serial No. __________________________  
6
CAUTION  
Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
7
8
9
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Output Power  
10 When disconnecting the power cord from the  
wall outlet, grasp the plug; do not pull the cord.  
11 Do not clean this unit with chemical solvents; this  
might damage the finish. Use a clean, dry cloth.  
12 Use only the voltage specified on this unit. Using  
this unit with a higher voltage than specified is  
dangerous and may cause fire, damage to this unit,  
and/or personal injury. YAMAHA will not be held  
responsible for any damage resulting from use of  
this unit with a voltage other than as specified.  
13 Do not attempt to modify or fix this unit. Contact  
qualified YAMAHA service personnel when any  
service is needed. The cabinet should never be  
opened for any reason.  
10 mW (VCD/CD)  
Beam divergence 60 degree  
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN  
OR MOISTURE.  
14 When not planning to use this unit for long  
periods of time (i.e., vacation), disconnect the AC  
power plug from the wall outlet.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction  
Disc Operation  
Region codes...............................................................3  
Supplied accessories..................................................3  
Notes about discs/content format.........................3  
Cleaning discs..............................................................4  
Patent information.....................................................4  
Basic playback...........................................................14  
General operation...................................................14  
Pausing playback.................................................................14  
Selecting track/chapter...................................................14  
Searching backward/forward.......................................14  
Stopping playback..............................................................14  
Selecting the various repeat/shuffle functions....15  
Repeat and shuffle.............................................................15  
Repeating a section within a chapter/track.........15  
Operations for video playback (DVD/VCD/SVCD) ...15  
Using the disc menu.........................................................15  
Slow motion.........................................................................15  
Zooming in............................................................................16  
Resuming playback from the last stopped point....16  
On-screen display (OSD).............................................16  
Special DVD features .............................................17  
Playing by title......................................................................17  
Camera angle.......................................................................17  
Audio........................................................................................18  
Subtitles...................................................................................18  
Special VCD/SVCD features.................................18  
Playback control (PBC)..................................................18  
Preview function................................................................18  
Playing data discs (MP3/WMA/JPEG/DivX).......... 19  
General operation.............................................................19  
Selecting a folder and track/file..................................20  
Repeat and shuffle.............................................................20  
Special picture disc features..................................20  
Preview function................................................................20  
Zooming pictures..............................................................20  
Playback with multi-angles............................................21  
Scan effect..............................................................................21  
Playing MP3 music and JPEG picture  
Functional Overview  
Front panel ..................................................................5  
Rear panel....................................................................5  
Remote control..........................................................6  
Connections  
General notes on connections................................7  
Audio connections.....................................................7  
Digital connection................................................................7  
Analog connection...............................................................7  
Video connections .....................................................8  
Component video jacks <A>.......................................8  
S-video jack <B>..................................................................8  
Composite video jack <C> ...........................................8  
HDMI connections.....................................................9  
HDMI jack.................................................................................9  
Getting Started  
Step 1: Inserting batteries into the remote control...10  
Using the remote control.............................................10  
Step 2: Turning on the power.............................. 11  
Step 3: Setting a TV type and display.................. 11  
Setting a color system for your TV.........................11  
Setting an aspect ratio for your TV.........................12  
Step 4: Setting a language preference................. 12  
Setting the OSD Language...........................................12  
Setting the audio, subtitle and disc menu  
simultaneously.....................................................................21  
Special DivX features .............................................21  
Interactive menu ................................................................21  
Multiple audio and subtitle languages ....................21  
languages (DVD-Video only)......................................13  
1 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Setup Menu  
Language Codes......................... 36  
Troubleshooting ........................ 38  
Glossary ...................................... 40  
Specifications ............................. 42  
General setup menu............................................... 22  
Locking/Unlocking the disc for viewing.................22  
Dimming the front panel display...............................22  
Programming disc tracks (except MP3/WMA/  
JPEG/DivX)............................................................................22  
OSD language .....................................................................23  
Screen saver .........................................................................23  
Sleep timer............................................................................23  
Auto standby........................................................................24  
®
DivX VOD registration code..................................24  
Audio setup menu................................................... 24  
Setting the analog output..............................................24  
Setting the digital output...............................................25  
Setting the HDMI audio.................................................26  
CD upsampling...................................................................26  
Night mode...........................................................................26  
Lip synchronization...........................................................27  
Video setup menu................................................... 27  
TV type....................................................................................27  
Setting the TV display.....................................................27  
Progressive ............................................................................28  
Picture setting......................................................................29  
Selecting the black level.................................................30  
Closed caption....................................................................30  
HDMI setup..........................................................................30  
Preference setup menu.......................................... 31  
Audio, subtitle and disc menu....................................32  
Restricting playback with parental control..........32  
Playback of VR format....................................................32  
MP3/JPEG menu.................................................................34  
Displaying DivX external subtitle files ...................34  
Changing the password..................................................35  
PBC (Playback control)..................................................35  
Resetting the system........................................................35  
2 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing this unit. This  
Owner’s Manual explains the basic  
operation of this unit.  
– This unit can play the following data  
discs (For MP3 and WMA files, the  
parenthetic words represent the  
compatible sampling rate and bit rate):  
– MP3 files recorded on CD-R/RW,  
DVD+R/RW and DVD-R/RW  
(fs 32, 44.1, 48 kHz / 96 320 kbps  
(CBR only))  
– WMA (except copy protected  
WMA) files recorded on CD-R/RW,  
DVD+R/RW and DVD-R/RW  
(When in fs 44.1 kHz: 64 192 kbps  
(CBR only)/ When in fs 48 kHz: 128 –  
192 kbps (CBR only))  
Region codes  
DVD discs must be labeled ALL  
regions or Region 1 in order to  
play on this unit.  
ALL  
You cannot play discs labeled for  
other regions.  
1
Supplied accessories  
– JPEG (except Progressive JPEG) files  
recorded on CD-R/RW, DVD+R/  
RW and DVD-R/RW (compatible  
resolution: 3072 x 2048 or less)  
– KODAK Picture CD  
– Remote control  
– Two batteries (AA, R06, UM-3) for the  
remote control  
– Audio/Video pin cable  
(red/white/yellow plugs)  
– Owner’s Manual  
– FUJICOLOR CD  
– DivX Video files recorded on CD-R/  
RW, DVD+R/RW and DVD-R/RW  
®
– Official DivX Ultra Certified  
Notes about discs/content format  
product  
®
– Plays all versions of DivX video  
(including DivX 6) with enhanced  
playback of DivX media files and  
the DivX Media Format  
– This unit can play the disc types  
associated with the logos shown below.  
Do not attempt to load any other type  
of disc into this unit. Doing so may  
damage this unit.  
®
®
®
– ISO 9660 Level1/Level2 for CD-R/RW  
– Up to 298 folders per disc and up to  
648 files per folder with up to 8  
hierarchies  
Notes:  
– CD-R/RW, DVD+R/RW/R DL and  
DVD-R/RW/R DL cannot be played  
unless finalized.  
– Only the first session of DVD+R/R DL  
and DVD-R/RW/R DL can be played.  
– Some discs cannot be played depending  
on disc characteristics or recording  
conditions.  
– Do not use any non-standard shaped  
discs (heart-shaped, etc.).  
– Do not use discs with tape, seals, or  
paste on their surface.  
– This unit can play DVD+R/RW/R DL and  
DVD-R/RW/R DL discs recorded in  
DVD-Video compatible format.  
– This unit can play DVD-RW discs  
recorded in VR format (compatible with  
CPRM).  
– Do not use discs with many scratches  
on their surface.  
3 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Cleaning discs  
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center  
out. Do not wipe in a circular motion.  
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic  
spray intended for analog records.  
Patent information  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are  
trademarks of Dolby Laboratories.  
”DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.  
HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks  
of HDMI Licensing LLC.  
This product incorporates copyright protection technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
4 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Overview  
Front panel  
HDMI  
1
2
345  
6
7 8 9  
1 STANDBY/ON  
5 PROGRESSIVE indicator  
Lights up when this unit enters the progressive  
mode.  
Turns on this unit or sets it to the standby  
mode.  
2 Disc tray  
6 Front panel display  
Loads a disc in the disc tray.  
Shows the current status of this unit.  
3 OPEN/CLOSE (/)  
7 PLAY (B)  
Opens or closes the disc tray.  
Starts playback.  
4 HDMI indicator  
8 PAUSE (;)  
Lights up when an HDMI component is  
connected, and signals output via the HDMI jack  
of this unit.  
Pauses playback.  
9 STOP (9)  
Stops playback.  
Rear panel  
HDMI  
1
2
3
4
5 6 7  
1 AC power cord  
5 VIDEO OUT - COMPONENT (Y, PB, PR  
Connect to a standard AC outlet.  
jacks  
Connect to the component input jacks of your  
AV receiver.  
2 HDMI output jack  
Connect to the HDMI input jack of your HDMI  
component.  
6 VIDEO OUT - S VIDEO jack  
Connect to the S-video input jack of your AV  
receiver.  
3 AUDIO OUT (L, R) jacks  
Connect to the audio input jacks of your AV  
receiver or stereo system.  
7 VIDEO OUT - VIDEO jack  
Connect to the composite video input jack of  
your AV receiver.  
4 DIGITAL OUT - COAXIAL jack  
Connect to the coaxial input jack of your AV  
receiver.  
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.  
Electrostatic discharge may cause permanent damage to this unit.  
5 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Overview  
Remote control  
7 SUBTITLE  
Selects the subtitle language.  
8 ANGLE  
Selects the DVD camera angle.  
1
1
2
5
8
0
3
6
9 REPEAT  
Repeats the chapter, track, title or disc.  
Shuffles the chapter or track.  
4
q
7
9
TOP MENU RETURN  
ON SCREEN  
0 A-B  
w
e
2
3
Repeats a specific segment.  
MENU  
SETUP  
q Numeric buttons (0-9)  
Selects numbered items in the currently  
displayed menu.  
ENTER  
OK  
4
r
t
y
5
6
STOP  
PLAY  
PAUSE  
w ON SCREEN  
Accesses or exits from the on-screen  
display (OSD) menu of this unit.  
SUBTITLE ANGLE ZOOM AUDIO  
7
8
9
0
u
i
o
p
REPEAT  
A
B
SCAN MUTE  
e SETUP  
DVD13  
Accesses or exits from the setup menu  
of this unit.  
r T  
Searches forward.*  
Moves to the next chapter or track.  
t PLAY (B)  
Starts playback.  
1
y PAUSE (;)  
Turns on this unit or sets it to the  
standby mode.  
Pauses playback temporarily.  
Frame-by-frame playback.  
2 TOP MENU/RETURN  
u AUDIO  
Displays the top-level disc (DVD).  
Moves back to the previous menu (DVD*/  
VCD).  
Selects the audio language or format.  
i ZOOM  
Enlarges the video image.  
3 MENU  
Accesses the menu of a disc (DVD).  
Switches PBC on or off (VCD).  
o MUTE  
Mutes the audio output. Press again to restore  
the audio output to previous volume level.  
4 1/ 2/3/4  
Selects an item in the currently displayed  
menu. Search or slow playback.  
p SCAN  
Previews the content of a track or whole disc  
(VCD).  
ENTER/OK  
Plays the first 6 seconds or less of each track  
(CD).  
Confirms the menu selection.  
5 S  
Searches backward.*  
Moves to the previous chapter or track.  
* Press and hold the button for about two  
seconds.  
6 STOP (9)  
Stops playback.  
Opens the disc tray.*  
6 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
You need to set “DIGITAL OUTPUT” to  
“ALL” (see “DIGITAL OUTPUT” on  
page 25).  
General notes on connections  
Be sure to turn off this unit and unplug the  
power supply cable, before you make or  
change connections.  
Notes:  
– If the audio format of the digital output  
does not match the capabilities of your  
receiver, the receiver produces a distorted  
sound or no sound at all. Make sure to  
select the appropriate audio format from  
the menu screen on the disc.  
Pressing AUDIO on the remote control once  
or more may change not only the audio  
languages but also the audio format. The  
selected format appears in the front panel  
display for several seconds.  
• Depending on the equipment you wish  
to connect, there are various ways to  
makeconnections. Possibleconnections  
are described below.  
• Refer to the manuals of your other  
components as necessary to make the  
best connections.  
• Do not connect this unit via your VCR.  
The video quality could be distorted by  
the copy protection system.  
• Do not connect the audio out jack of  
this unit to the phono in jack of your  
audio system.  
– If you wish to enjoy Dolby Digital, DTS and  
MPEG formats, you must connect this unit  
to an AV receiver that supports these  
formats.  
Audio connections  
Digital connection  
This unit has a coaxial digital out jack.  
Connect DIGITAL OUT - COAXIAL jack  
of this unit to your AV receiver equipped  
with Dolby Digital, DTS, or MPEG  
decoder using a commercially available  
coaxial cable.  
Analog connection  
This unit has analog output jacks.  
Connect AUDIO OUT (L, R) jacks of this  
unit to the corresponding input jacks of  
your audio component (such as a stereo  
amplifier) using the supplied audio pin  
cable.  
This unit  
L
R
Audio pin cable  
This unit  
C
L
R
AV receiver  
Stereo  
amplifier  
COAXIAL  
IN  
CD/DVD  
L
R
Subwoofer  
Center  
speaker  
Right  
speaker  
Left  
speaker  
Left front  
speaker  
Rightfront  
speaker  
Right surround  
speaker  
Leftsurround  
speaker  
Surround  
back speaker  
7 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Video connections  
Component video jacks <A>  
If your AV receiver has video output jacks,  
connect your receiver and then your TV  
so that you can use one TV for several  
different video sources (LD, VCR, etc.) by  
simply switching the input source selector  
of your receiver.  
This unit has four types of video output  
jacks. Use the one that corresponds to the  
input jacks of the component to be  
connected.  
Component video connections achieve  
high fidelity color reproduction than S-  
video connections by transmitting video  
signals on separate wires for luminance (Y:  
green) and chrominance (PB: blue, PR: red).  
Connect VIDEO OUT - COMPONENT  
(Y, PB, PR jacks of this unit to component  
input jacks of your AV receiver and then to  
those of your TV using a commercially  
available component cable. Observe the  
color of each jack when you make  
connections.  
If your receiver does not have component  
output jacks, you can achieve a better  
video image by connecting the component  
output jacks of this unit directly to the  
component input jacks of your TV.  
This unit  
PR  
PB  
Y
Video pin cable  
<A>  
<B>  
<C>  
V
PR  
PB  
Y
S-video jack <B>  
S
S-video connections achieve a clearer  
picture than composite video connections  
by transmitting video signals on separate  
wires for luminance (Y) and chrominance  
(C).  
PR  
PB  
Y
COMPONENT  
VIDEO IN  
S VIDEO  
INPUT  
VIDEO  
INPUT  
AV receiver  
VIDEO  
COMPONENT S VIDEO  
Connect VIDEO OUT - S VIDEO jack of  
this unit to S-video input jack of your AV  
receiver and then to that of your TV using  
a commercially available S-video cable.  
OUT  
VIDEO OUT OUT  
VIDEO  
IN  
COMPONENT S VIDEO  
VIDEO IN  
IN  
TV  
Composite video jack <C>  
Connect VIDEO OUT - VIDEO jack of this  
unit to video input jack of your AV  
receiver and then to that of your TV using  
the supplied video pin cable.  
8 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Notes:  
HDMI connections  
HDMI jack  
Connect the HDMI output jack of this unit  
to an HDMI input jack of your TV using a  
commercially available HDMI cable.  
– You need to make an appropriate audio  
connections if the connected component  
does not output audio signals (see “Audio  
connections” on page 7).  
– This unit is not compatible with HDCP-  
incompatible HDMI or DVI components.  
– You need a commercially available HDMI/  
DVI conversion cable when you connect this  
unit to other DVI components. In this case,  
the HDMI jack of this unit does not output  
any audio signals.  
– Depending on the connected DVI  
component, black and white in the image  
may not be distinct. In that case, adjust the  
picture setting of the connected DVI  
component.  
HDMI  
This unit  
HDMI cable  
– When connecting an HDMI component,  
refer to the instruction manual for the  
component.  
– Do not disconnect or turn off the power of  
the HDMI/DVI component connected to  
the HDMI jack of this unit while data is  
being transferred. Doing so may disrupt  
playback or cause noise.  
HDMI IN  
TV  
You need to set “HDMI AUDIO” (see  
page 26) and “HDMI VIDEO” (see page 30).  
9 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Step 1: Inserting batteries into  
the remote control  
Using the remote control  
3
Remote control  
sensor  
1
2
Point the remote control at  
the remote control sensor,  
within approximately 6 m  
(20 feet) from this unit.  
1 Open the battery compartment.  
2 Insert the two supplied batteries (AA, R06,  
UM-3) following the indications (+/–)  
inside the compartment.  
3 Close the cover.  
Notes:  
– Insert batteries correctly according to the  
polarity markings (+/–). The batteries  
inserted in the opposite direction may leak.  
– Replace the exhausted batteries  
immediately with new ones to prevent a  
leakage.  
– Remove the batteries from the  
compartment if the remote control is not  
used for more than a month.  
– If the batteries have leaked, dispose of  
them immediately. Avoid touching the  
leaked material or letting it come into  
contact with clothing, etc. Clean the battery  
compartment thoroughly before installing  
new batteries.  
Handling the remote control  
• Do not spill water or other liquids on  
the remote control.  
• Do not drop the remote control.  
• Do not leave or store the remote  
control in the following types of  
conditions:  
– places of high humidity, such as near a  
bath  
– places of high temperature, such as near  
a heater or stove  
– places of extremely low temperature  
– dusty places  
– Do not use old batteries together with new  
ones.  
– Do not use different types of batteries (such  
as alkaline and manganese batteries)  
together. Read the packaging carefully as  
these different types of batteries may have  
the same shape and color.  
– Dispose of the batteries correctly in  
accordance with your local regulations.  
10 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
3 Press 3/4to highlight [TV TYPE], and  
then press 2.  
Step 2: Turning on the power  
1 Connect the AC power cord to the power  
4 Press 3/4to highlight one of the following  
outlet.  
options.  
2 Turn on your TV and AV receiver.  
PAL  
Select this if the connected TV is a PAL  
system TV. It will change the video signals  
of NTSC discs and output them in PAL  
format.  
3 Select the appropriate input source of the  
AV receiver connected to this unit. Refer  
to the manual supplied with your AV  
receiver for details.  
NTSC  
4 Turn on this unit.  
Select this if the connected TV is an NTSC  
system TV. It will change the video signals  
of PAL discs and output them in NTSC  
format.  
5 Set the TV to the correct Video IN channel  
(e.g. EXT1, EXT2, AV1, AV2, AUDIO/  
VIDEO, etc. Refer to the manual supplied  
with your TV for details).  
The front panel display lights up and the  
MULTI  
default screen appears on the TV.  
Select this if the connected TV is  
compatible with both NTSC and PAL  
formats (such as a multi-system TV).  
The output format will be in accordance  
with the video signals of the disc.  
Step 3: Setting a TV type and  
display  
5 Select an item, and then press  
ENTER/OK to confirm your selection.  
Setting a color system for your  
TV  
Notes:  
– Before changing the current TV standard  
setting, ensure that your TV supports the  
selected TV type.  
This unit is compatible with both NTSC  
and PAL video formats. Select the color  
system that matches your TV.  
– If the picture is not displayed properly on  
your TV, wait for 15 seconds for this unit to  
activate automatic recovery.  
VIDEO SETUP PAGE  
– When making HDMI connections, you  
cannot change or select [TV TYPE].  
TV TYPE  
PAL  
TV DISPLAY  
NTSC  
MULTI  
PROGRESSIVE  
PICTURE SETTING  
BLACK LEVEL  
CLOSED CAPTION  
HDMI SETUP  
CHANGING NTSC TO PAL:  
1. ENSURE THAT YOUR TV SUPPORTS  
PAL STANDARD.  
2. IF THERE IS  
DISPLAYED ON THE TV, WAIT 15  
SECONDS FOR AUTO RECOVER.  
A
DISTORTED PICTURE  
1 Press SETUP.  
2 Press 2repeatedly to select “VIDEO  
SETUP PAGE”.  
OK  
CANCEL  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
11 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Setting an aspect ratio for your  
TV  
Step 4: Setting a language  
preference  
You can set the aspect ratio of this unit to  
match your TV. If the aspect ratio of your  
TV is 4:3, you do not need to change this  
setting. If you have a widescreen TV,  
change this setting according to the  
following procedure.  
You can select your own preferred  
language settings.This unit automatically  
switches to your preferred language  
whenever you load a disc. If the selected  
language is not available on the disc, the  
default language of the disc will be used  
instead. The OSD language in the system  
menu remains once selected.  
For details, see “Setting the TV display” on  
page 27.  
Setting the OSD Language  
VIDEO SETUP PAGE  
TV TYPE  
TV DISPLAY  
4:3 PAN SCAN  
4:3 LETTER BOX  
16:9  
PROGRESSIVE  
PICTURE SETTING  
BLACK LEVEL  
CLOSED CAPTION  
HDMI SETUP  
GENERAL SETUP PAGE  
DISC LOCK  
DISPLAY DIM  
PROGRAM  
OSD LANGUAGE  
SCREEN SAVER  
SLEEP  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
1 Press SETUP.  
AUTO STANDBY  
DIVX(R) VOD CODE  
2 Press 2repeatedly to select “VIDEO  
SETUP PAGE”.  
1 Press SETUP.  
3 Press 3/4to highlight [TV DISPLAY], and  
then press 2.  
2 Press 1/ 2to select “GENERAL SETUP  
PAGE”.  
4 Press 3/4to highlight [16:9], and then  
press ENTER/OK to confirm the  
selection.  
3 Press 3/4to highlight [OSD  
LANGUAGE], and then press 2.  
4 Press 3/4to select a language, and then  
press ENTER/OK to confirm your  
selection.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
12 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Setting the audio, subtitle and  
disc menu languages  
(DVD-Video only)  
PREFERENCE PAGE  
AUDIO  
ENGLISH  
SUBTITLE  
CHINESE (SIMP)  
FRENCH  
DISC MENU  
PARENTAL  
VR LIST  
SPANISH  
PORTUGUESE  
POLISH  
MP3/JPEG NAV  
DIVX SUBTITLE  
PASSWORD  
ITALIAN  
TURKISH  
1 Press STOP (9) twice, and then press  
SETUP.  
2 Press 2repeatedly to select  
“PREFERENCE PAGE”.  
3 Press 3/4to highlight one of the options  
below at a time, and then press 2.  
– AUDIO (audio language)  
– SUBTITLE (subtitle language)  
– DISC MENU (disc menu language)  
4 Press 3/4to select a language, and then  
press ENTER/OK to confirm your  
selection.  
If the language you want is not in the  
list, select [OTHERS],  
and then use the numeric buttons (0-9)  
on the remote control to enter the 4-digit  
language code (see “Language Codes” on  
page 36), and then press ENTER/OK to  
confirm the code.  
5 Repeat steps 34 for other language  
settings.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
13 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
IMPORTANT!  
Pausing playback  
– If the inhibition icon ( ) appears  
on the TV screen when a button is  
pressed, the function for that  
button is not available on the  
current disc or at the current time.  
– Depending on the DVD or VIDEO  
CD disc, some operations may  
operate differently or be  
1 During playback, press PAUSE (;).  
Playback is paused and the sound is  
muted.  
2 Press PAUSE (;) again to select the next  
picture frame.  
3 To resume normal playback, press  
PLAY (B).  
restricted.  
– Do not push on the disc tray or put  
any objects other than discs on the  
disc tray. Doing so may cause this  
unit to malfunction.  
Selecting track/chapter  
• Press S/ Tor use the numeric  
buttons (0-9) to select a track/chapter  
number.  
• During repeated playback, press S/  
Tto replay the same track/chapter.  
Basic playback  
1 Press STANDBY/ON on the front panel  
or  
this unit.  
on the remote control to turn on  
Searching backward/forward  
1 Press and hold S/ Tor press 1/ 2.  
2 Press OPEN/CLOSE (/) on the front  
2 While searching, press S/ Tor  
1/ 2repeatedly to select the desired  
speed.  
panel to open the disc tray.  
3 Place the disc in the disc tray with the  
printed side up.  
3 To resume normal playback, press  
PLAY (B).  
4 Press OPEN/CLOSE (/) again to close  
the disc tray.  
Notes:  
After recognizing the disc, this unit  
begins to play back automatically.  
• If you press PLAY (B) when the disc  
tray is open, the disc tray closes and  
playback starts automatically.  
1/ 2key may not be available with some  
discs.  
– For MP3 and WMA, the search function  
allows you to search the track currently  
being played.  
General operation  
Stopping playback  
• Press STOP (9).  
Unless stated otherwise, all operations  
described here are carried out using the  
supplied remote control.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
14 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
Selecting the various repeat/  
shuffle functions  
Operations for video playback  
(DVD/VCD/SVCD)  
Repeat and shuffle  
Using the disc menu  
• Each time you press REPEAT during  
playback, the front panel display changes  
as follows:  
Depending on the disc, a menu may appear  
on the TV screen once you load the disc.  
To select a playback feature or item  
DVD  
• Use 1/2/3/4or the numeric buttons  
(0-9), and then press ENTER/OK to  
start playback.  
RPT ONE (repeat chapter)  
RPT TT (repeat title)  
RPT ALL (repeat disc)  
SHUFFLE (shuffle)  
RPT SHF (shuffle repeat)  
RPT OFF (repeat off)  
To access or exit from the menu  
• Press MENU.  
VCD/SVCD/CD  
Slow motion  
You can play back in slow motion.  
RPT ONE (repeat track)  
RPT ALL (repeat disc)  
SHUFFLE (shuffle)  
RPT SHF (shuffle repeat)  
RPT OFF (repeat off)  
1 Press 3for reverse slow motion or 4for  
forward slow motion.  
2 During slow motion, press 3/4  
MP3/WMA/DivX  
repeatedly to select the desired speed.  
RPT ONE (repeat track)  
RPT FLD (repeat folder)  
SHUFFLE (shuffle)  
3 To resume normal playback, press  
PLAY (B).  
RPT OFF (repeat off)  
Note:  
Note:  
– Reverse slow motion is not available for  
VCDs and SVCDs.  
– For VCD, repeat playback is not possible  
when the PBC mode is selected.  
Repeating a section within a  
chapter/track  
1 While playing a disc, press A-B at the  
desired starting point.  
2 Press A-B again at the desired end point.  
• A and B can only be set within the same  
chapter/track.  
The selected section repeats  
continuously.  
3 To exit from the sequence, press A-B.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
15 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
Zooming in  
On-screen display (OSD)  
This function allows you to enlarge or  
lessen the picture on the TV screen and to  
pan through the enlarged picture.  
The OSD menu shows disc playback  
information (e.g., the title or chapter  
number, elapsed playing time or audio/  
subtitle language). A number of operations  
are possible without interrupting disc  
playback.  
1 During playback, press ZOOM repeatedly  
to display the picture at different scales.  
• Use 1/ 2/3/4 to pan through the  
enlarged picture.  
1 During playback, press ON SCREEN.  
A list of available disc information  
appears on the TV screen.  
Playback continues.  
2 Press ZOOM repeatedly to return to the  
original size.  
DVD  
MENU  
Resuming playback from the last  
stopped point  
You can resume playback of the last 10  
discs, even if the discs were ejected or the  
power of this unit was turned off.  
TITLE  
02/14  
02/14  
5.1CH  
ENG  
CHAPTER  
AUDIO  
SUBTITLE  
BITRATE 16  
TITLE ELAPSED 0:02:25  
VCD/SVCD  
1 Load one of the last 10 discs.  
“LOADING” appears on the TV screen.  
MENU  
2 Press PLAY (B) while “LOADING” is  
displayed on the TV screen.  
TRACK  
02/14  
DISC TIME  
TRACK TIME  
REPEAT  
0:49:17  
0:03:43  
OFF  
“RESUME PLAY” appears on the TV  
screen and the disc is played back from  
the last point.  
BITRATE 16  
TOTAL ELAPSED 0:02:25  
2 Press 3/4to view the information, and  
then press ENTER/OK to access the  
selected item.  
To cancel the resume mode  
• When playback is stopped, press  
STOP (9) again.  
3 Use the numeric buttons (0-9) to input  
the number/time or press 3/4to make a  
selection, and then press ENTER/OK to  
confirm the selection.  
Playback changes to the selected time  
or to the selected title/chapter/track.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
16 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
Title/Chapter/Track selection  
(DVD/VCD)  
Repeat/Time Display (DVD/VCD)  
1 Press 3/4to select [REPEAT] or [TIME  
1 Press 3/4to select [TITLE] or  
DISP.].  
[CHAPTER] (DVD) or [TRACK] (VCD).  
2 Press ENTER/OK to confirm the  
2 Press ENTER/OK to confirm the  
selection.  
selection.  
3 Press 3/4to highlight your selection, and  
then press ENTER/OK.  
3 Select a title, chapter or track number  
using the numeric buttons (0-9).  
Time display (CD)  
Time search (DVD/VCD)  
Each time you press ON SCREEN, the  
time display changes as follows:  
1 Press 3/4to select [TT TIME] or [CH  
TIME] (DVD) or [TRACK TIME] or [DISC  
TIME] (VCD).  
TOTAL ELAPSED  
SINGLE REMAIN  
TOTAL REMAIN  
SINGLE ELAPSED  
• [TT TIME] refers to the total time of the  
current title, and [CH TIME] refers to  
the total time of the current chapter.  
2 Press ENTER/OK to confirm the  
Special DVD features  
Playing by title  
selection.  
3 Enter hours, minutes and seconds from left  
to right using the numeric buttons (0-9)  
(e.g. 0:34:27).  
1 Press MENU.  
The disc title menu appears on the TV  
screen.  
Audio/Subtitle/Angle (DVD)  
You can change [AUDIO], [SUBTITLE] or  
[ANGLE] if these functions are available on 2 Use 1/ 2/3/4 or the numeric buttons  
the disc you are playing.  
(0-9) to select a playback option.  
1 Press 3/4to select [AUDIO],  
3 Press ENTER/OK to confirm your  
[SUBTITLE] or [ANGLE].  
selection.  
2 Press ENTER/OK to confirm the  
selection.  
Camera angle  
3 For Audio and Subtitle:  
Press 3/4to highlight your selection, and  
then press ENTER/OK.  
OR  
• Press ANGLE repeatedly to select the  
desired angle.  
For Angle:  
Select an angle using the numeric  
buttons (0-9).  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
17 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
Audio  
Preview function  
1 Press SCAN.  
Changing the audio language and/or  
format  
A list appears on the TV screen.  
• Press AUDIO repeatedly to select an  
audio language.  
SELECT DIGEST TYPE:  
TRACK DIGEST  
DISC INTERVAL  
TRACK INTERVAL  
Subtitles  
• Press SUBTITLE repeatedly to select  
a subtitle language.  
2
Press 3/4to highlight [TRACK DIGEST],  
[DISC INTERVAL] or [TRACK INTERVAL].  
Special VCD/SVCD features  
TRACK DIGEST  
This function minimizes the picture for  
every track and displays six at a time on the  
screen to help you view the tracks on the  
disc.  
Playback control (PBC)  
For VCD with playback control  
(PBC) feature (version 2.0 only)  
Press MENU to toggle between “PBC  
ON” and “PBC OFF”.  
If you select “PBC ON”, the disc menu  
(if available) appears on the TV screen.  
• Use S/ Tor the numeric  
buttons (0-9) to select a playback  
option.  
DISC INTERVAL  
This function is used to divide a disc into  
six parts at regular intervals, and display  
them on one page to help you preview the  
entire disc.  
TRACK INTERVAL  
This function is used to divide a single track  
into six parts at regular intervals, and  
display them on one page to help you  
preview the selected track.  
• During playback, press TOP  
MENU/RETURN to return to the  
menu screen.  
Note:  
If you want to skip the index menu  
and play back a disc directly from the  
beginning,  
– You can only select [TRACK INTERVAL]  
during playback when PBC is turned off.  
• Press MENU on the remote control to  
turn off PBC.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
18 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
3 Press ENTER/OK.  
Thumbnail pictures appear on the TV  
screen.  
Playing data discs (MP3/WMA/  
JPEG/DivX)  
General operation  
1 Load a disc.  
• The disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
The data disc menu appears on the TV  
screen.  
TYPE:TITLE  
SELECT(01-06):- -  
EXIT  
MENU  
NEXT  
00:00 00:00  
001/020  
(Example of 6 thumbnails in the display)  
4 Use 1/ 2/3/4 to select a track or use the  
numeric buttons (0-9) to input the  
selected track number.  
Favorite  
MP3  
Piano  
Cello  
MP3  
5 Press S/ Tto open the previous or  
MP3  
MP3  
Jazz  
Live  
next page.  
6 Press ENTER/OK to confirm the  
selection.  
To quit the preview function  
• Use 1/ 2/3/4 to highlight [EXIT] and  
press ENTER/OK.  
2 Playback starts automatically. If not, press  
PLAY (B).  
During playback, you can:  
• Press S/ Tto select another  
track/file in the current folder.  
To return to the preview menu  
• Use 1/ 2/3/4to highlight [MENU] and  
press ENTER/OK.  
• Press PAUSE (;) to pause playback.  
For CD:  
Note:  
• When playback is stopped, press SCAN.  
Each track is played for a few seconds.  
– It may not be possible to play certain MP3/  
WMA/JPEG/DivX discs due to the  
configuration and characteristics of the  
discs or the recording conditions.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
19 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
Selecting a folder and track/file  
Preview function  
This function displays the content of the  
current folder or the entire disc.  
1 Press 3/4to select a folder, and then  
press ENTER/OK to open the folder.  
1 Press STOP (9) during playback.  
12 thumbnail pictures appear on the TV  
screen.  
2 Press 3/4to select a track/file.  
3 Press ENTER/OK to confirm your  
selection.  
Playback starts from the selected file to  
the end of the folder.  
Repeat and shuffle  
When the MP3 disc/WMA disc/picture  
disc menu is shown on the screen;  
• Press REPEAT repeatedly to select a  
“Play Mode”.  
FOLDER: files are played back once.  
REPEAT ONE: one file is played  
repeatedly.  
REPEAT FOLDER: all files in one folder  
are played repeatedly.  
2 Press S/ Tto display the other  
pictures on the previous/next page.  
3 Use 1/ 2/3/4 to highlight one of the  
pictures, and then press ENTER/OK to  
start playback.  
SHUFFLE: all files in the current folder  
are played in random order.  
OR  
Move the cursor to highlight  
on the  
bottom of the page to start playback from  
the first picture on the current page.  
Special picture disc features  
1 Load a picture disc (JPEG, Kodak Picture  
CD and Fujicolor CD).  
For JPEG discs:  
For JPEG discs, the picture menu  
appears on the TV screen.  
4 Press MENU to return to JPEG disc  
menu.  
For Kodak Picture CDs and Fujicolor  
CDs, the slideshow begins.  
Zooming pictures  
2 Press PLAY (B) to start the slideshow.  
1 During playback, press ZOOM repeatedly  
to display the picture at different scales.  
2 Use 1/ 2/3/4to view the zoomed picture.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
20 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operation  
Playback with multi-angles  
Special DivX features  
• During playback, press 1/ 2/3/4 to  
rotate the picture on the TV screen.  
1: rotates the picture counter-clockwise  
2: rotates the picture clockwise  
3: flips the picture vertically  
DivX files including DMF (DivX  
Media Format) features only  
Interactive menu  
4: flips the picture horizontally  
1 Load a disc.  
The interactive menu appears on the TV  
screen.  
Scan effect  
• Press ANGLE repeatedly to choose a  
scan effect.  
Various scan effects appear in the top  
2 Use 1/ 2/3/4 to select a chapter.  
3 Press ENTER/OK or PLAY (B) to start  
playback of the selected chapter.  
left corner of the TV screen.  
To access the interactive menu  
• During playback, press MENU.  
Playing MP3 music and JPEG  
picture simultaneously  
To return to the data disc menu  
screen  
• When the interactive menu is displayed,  
1 Load a disc that contains both MP3 music  
and JPEG picture data.  
press STOP (9).  
The disc menu appears on the TV  
screen.  
Multiple audio and subtitle  
languages  
2 Select an MP3 music track.  
3 During MP3 music playback, select a JPEG  
picture file from the TV screen, and then  
press PLAY (B).  
To select an audio language  
• During playback, press AUDIO to  
switch the audio language recorded on  
the contents.  
The picture files are played back one  
after another until the end of the folder.  
4 To quit simultaneous playback, press  
MENU, and then press STOP (9).  
To select a subtitle language  
• During playback, press SUBTITLE to  
switch or turn on/off the subtitle  
Note:  
– Some files cannot be played correctly  
depending on disc characteristics or  
recording conditions.  
language recorded on the contents.  
Note:  
– For information about external subtitle files,  
see “Displaying DivX external subtitle files”  
on page 34.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the disc.  
21 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
Setup is carried out on the TV screen,  
enabling you to customize this unit to suit  
your own particular requirements.  
UNLOCK  
Select this to unlock the disc and allow  
future playback.  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
General setup menu  
1 Press SETUP  
2 Press 1/ 2to select “GENERAL SETUP  
PAGE”.  
Dimming the front panel display  
You can select different levels of  
brightness for the front panel display.  
3 Press ENTER/OK to confirm your  
selection.  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [DISPLAY DIM], and then  
press 2.  
GENERAL SETUP PAGE  
DISC LOCK  
DISPLAY DIM  
PROGRAM  
100%  
Select this for full brightness.  
OSD LANGUAGE  
SCREEN SAVER  
SLEEP  
70%  
Select this for medium brightness.  
AUTO STANDBY  
DIVX(R) VOD CODE  
40%  
Select this for dimming display.  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
Locking/Unlocking the disc for  
viewing  
Not all discs are rated or coded by the  
manufacturer of the disc. You can prevent  
playback of a specific disc by locking the  
disc. You can lock up to 40 discs on this  
unit.  
Programming disc tracks  
(except MP3/WMA/JPEG/DivX)  
You can play back the contents of a disc in  
the desired order by programming the  
tracks to be played. You can store up to 20  
tracks per disc with a maximum of 10  
discs.  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [DISC LOCK], and then  
press 2.  
LOCK  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [PROGRAM], and then press 2  
to select [INPUT MENU].  
Select this to lock playback of the current  
disc. Subsequent access to a locked disc  
requires six-digit password.  
2 Press ENTER/OK to confirm your  
selection.  
The default password is “000 000” (see  
“Changing the password” on page 35).  
The input menu appears on the TV  
screen.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
22 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
PROGRAM: TRACK (01-17)  
OSD language  
This menu contains various options for the  
on-screen display (OSD) language. For  
details, see “Setting the OSD Language” on  
page 12.  
6
7
8
9
_ _  
_ _  
_ _  
_ _  
1
2
3
4
5
04  
10  
_ _  
_ _  
_ _  
10 _ _  
START  
EXIT  
NEXT  
Screen saver  
To input your favorite tracks/chapters  
This function is used to turn on or off the  
screen saver.  
3 Use the numeric buttons (0-9) to enter  
a valid track/chapter number.  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [SCREEN SAVER], and then  
press 2.  
4 Use 1/ 2/3/4 to move the cursor to the  
next position.  
• If the track/chapter number is more  
than ten, press Tto move to the  
next page, and then proceed with  
programming.  
ON  
Select this if you wish to turn off the TV  
screen when disc playback is stopped or  
paused for more than 15 minutes.  
OR  
• Use 1/ 2/3/4 to highlight [NEXT] on  
the program menu, and then press  
ENTER/OK.  
OFF  
Select this to disable the screen saver  
function.  
5 Repeat steps 34 to input another track/  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
chapter number.  
To remove a track  
6 Use 1/ 2/3/4 to move the cursor to the  
track you want to remove.  
Sleep timer  
This feature automatically sets this unit to  
the standby mode after a certain elapsed  
period.  
7 Press ENTER/OK to remove this track  
from the program menu.  
To start program playback  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [SLEEP], and then press 2.  
8 Use 1/ 2/3/4to highlight [START] on the  
program menu, and then press  
ENTER/OK.  
2 Press 3/4to select a setting.  
• You can select from 30, 60, 90, 120 and  
150 minutes. Select [OFF] to cancel the  
sleep timer function.  
Playback starts for the selected tracks in  
the programmed sequence.  
To exit from program playback  
3 Press ENTER/OK to confirm your  
9 Use 1/ 2/3/4 to highlight [EXIT] on the  
program menu, and then press  
ENTER/OK.  
selection.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
23 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
Notes:  
®
– All the downloaded videos from DivX  
Auto standby  
VOD can only be played back on this unit.  
– Time search feature is not available during  
DivX movie playback.  
This function is used to turn the auto  
standby mode on or off when disc playback  
is stopped for more than 30 minutes.  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [AUTO STANDBY], and then  
press 2.  
Audio setup menu  
1 Press SETUP.  
ON  
2 Press 1/ 2to select “AUDIO SETUP  
Select this if you wish to set this unit to the  
standby mode automatically when disc  
playback is stopped or paused for more  
than 30 minutes.  
PAGE”.  
3 Press ENTER/OK to confirm your  
selection.  
OFF  
Select this to disable the auto standby  
function.  
AUDIO SETUP PAGE  
ANALOG OUTPUT  
DIGITAL AUDIO  
HDMI AUDIO  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
CD UPSAMPLING  
NIGHT MODE  
LIP SYNC  
®
DivX VOD registration code  
®
Yamaha provides you with a DivX VOD  
(Video On Demand) registration code that  
allows you to rent and purchase videos  
using the DivX VOD service.  
For more information, visit at  
Setting the analog output  
Set the analog output to match the  
playback capability of this unit.  
®
1 In “AUDIO SETUP PAGE”, press 3/4to  
highlight [ANALOG OUTPUT], and then  
press 2.  
1 In “GENERAL SETUP PAGE”, press 3/4  
to highlight [DIVX(R) VOD CODE], and  
then press 2.  
STEREO  
The registration code appears.  
Select this to change channel output to  
stereo, which only delivers sound from the  
two front speakers.  
2 Press ENTER/OK to exit.  
3 Use the registration code to purchase or  
®
rent the videos from DivX VOD service  
LT/RT  
instructions and download the video onto  
a CD-R for playback on this unit.  
Select this if this unit is connected to a  
Dolby Pro Logic decoder.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
24 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
VIRTUAL SURR  
LPCM OUTPUT  
Select this to virtually reproduce the  
surround channels.  
Select this if you have connected this unit  
to a PCM-compatible receiver via a digital  
terminal, such as the coaxial terminal. In  
this case, you may need to adjust “LPCM  
OUTPUT”.  
Discs are recorded at a certain sampling  
rate. The higher the sampling rate, the  
better the sound quality.  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
Setting the digital output  
The [DIGITAL AUDIO] options are:  
“DIGITAL OUTPUT” and “LPCM  
OUTPUT”.  
48KHz  
Select this to play back discs recorded at  
the sampling rate of 48 kHz. All 96 kHz  
PCM data streams (if available) are  
1 In “AUDIO SETUP PAGE”, press 3/4to  
highlight [DIGITAL AUDIO], and then  
press 2.  
converted to the sampling rate of 48 kHz.  
96KHz  
2 Press 3/4to highlight an option.  
3 Press 2to enter a submenu.  
Select this to play back discs recorded at  
the sampling rate of 96 kHz. If the 96 kHz  
disc is copy protected, the digital output is  
automatically converted to the sampling  
rate of 48 kHz.  
DIGITAL OUTPUT  
Set the digital output according to your  
optional audio component connections.  
4 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
OFF  
Select this to turn off the digital output.  
ALL  
Select this if you have connected the digital  
audio output jack to a multi-channel  
decoder/receiver.  
PCM ONLY  
Select this only if your receiver is not  
capable of decoding multi-channel audio  
signals.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
25 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
Setting the HDMI audio  
CD upsampling  
When you connect this unit to an HDMI  
compatible component via the HDMI jack,  
select to turn on or off the HDMI audio  
output.  
This feature allows you to convert your  
music CD to a higher sampling rate using  
sophisticated digital signal processing for  
better sound quality. If you activate the  
upsampling function, this unit automatically  
switches to the stereo mode.  
1 In ‘AUDIO SETUP PAGE’, press 34to  
highlight [HDMI AUDIO], then press 2.  
1 In “AUDIO SETUP PAGE”, press 3/4to  
highlight [CD UPSAMPLING], and then  
press 2.  
ON  
Select this to turn on the HDMI audio  
output.  
OFF  
OFF  
Select this to disable CD-upsampling.  
Select this to turn off the HDMI audio  
output.  
88.2kHz (X2)  
Select this to convert the sampling rate of  
CDs to twice that of the original.  
Notes:  
– If you are not using the HDMI audio  
output, you should set this to [OFF].  
– If the monitor/receiver connected to this  
unit using HDMI does not support HDMI  
audio signal input, set this to [OFF].  
– This unit can output following audio signals  
using HDMI: 32/44.1/48 kHz, 2ch linear  
PCM signals and bitstream signals (Dolby  
Digital, DTS and MPEG).  
– When audio signals are being output by  
HDMI-compatible components, digital  
output signals are muted.  
– When [DIGITAL OUTPUT] is set to [OFF]  
on this unit, HDMI audio is muted even if  
[HDMI AUDIO] is set to [ON] and an  
HDMI connection is established between  
the monitor and receiver.  
176.4kHz (X4)  
Select this to convert the sampling rate of  
CDs to four times that of the original.  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
Note:  
– This setting is only valid for the signals  
output at the analog jacks.  
Night mode  
In the night mode, high volume output is  
softened and low volume output is brought  
upward to an audible level. It is useful when  
you watch your favorite action movie  
without disturbing others at night.  
– When [DIGITAL OUTPUT] is set to [ALL]  
on this unit, PCM signals are still output if  
the monitor and receiver only support the  
PCM format. However, the audio output is  
muted when audio format plays back the  
DTS source.  
1 In “AUDIO SETUP PAGE”, press 3/4  
to highlight [NIGHT MODE], and then  
press 2.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
26 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
ON  
TV type  
Select this to level out the volume. This  
feature is only available for movies with the  
Dolby Digital mode.  
This menu contains the options for  
selecting the color system that matches  
your TV. For details, see “Step 3: Setting a  
TV type and display” on page 11.  
OFF  
Select this when you want to enjoy the full  
dynamic range of surround sound.  
Setting the TV display  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
Set the aspect ratio of this unit to match  
your TV. The format you select must be  
available on the disc. Otherwise, the TV  
display setting will not affect the picture  
during playback.  
Lip synchronization  
This feature allows you to delay the sound  
output in order to synchronize it with the  
video image. This may be necessary when  
you use certain LCD monitors or  
projectors.  
1 In “VIDEO SETUP PAGE”, press 3/4to  
highlight [TV DISPLAY], and then press 2.  
2 Press 3/4to highlight one of the following  
options.  
4:3 PAN SCAN  
1 In “AUDIO SETUP PAGE”, press 1/ 2to  
highlight [LIP SYNC], and then press 2.  
Select this if the aspect ratio of your TV is  
4:3 and you want both sides of the picture  
to be trimmed or formatted to fit your TV  
screen.  
2 Press 1/ 2to adjust the delay time  
(between 00 ms and 200 ms), and then  
press ENTER/OK to confirm your  
selection.  
4:3 LETTER BOX  
Select this if the aspect ratio of your TV is  
4:3. In this case, a wide picture with black  
bands on the upper and lower portions of  
the TV screen are displayed.  
Video setup menu  
1 Press SETUP.  
16:9  
2
Press 1/2to select “VIDEO SETUP PAGE”.  
Select this if you have a widescreen TV.  
3 Press ENTER/OK to confirm your  
selection.  
VIDEO SETUP PAGE  
TV TYPE  
TV DISPLAY  
PROGRESSIVE  
PICTURE SETTING  
BLACK LEVEL  
CLOSED CAPTION  
HDMI SETUP  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
27 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
3 Select an item, and then press  
Progressive  
ENTER/OK to confirm your selection.  
This feature is only valid if you have  
connected this unit to a progressive scan  
TV through the component video jacks  
(see “Component video jacks <A>” on  
page 8).  
The relationship between the setting of  
this unit and the TV display  
When the aspect ratio of your TV is 4:3:  
Playback  
disc  
TV display  
Setting  
1 In “VIDEO SETUP PAGE”, press 3/4  
to highlight [PROGRESSIVE], and then  
press 2.  
16:9  
1
*
4:3 PAN  
SCAN  
OFF  
Select this to disable the progressive scan  
function.  
4:3  
16:9  
4:3  
ON  
Select this to enable the progressive scan  
function.  
4:3 LETTER  
BOX  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
Notes on activating progressive scan:  
– Ensure that your TV is equipped with  
progressive scan.  
– Connect using a component video  
cable.  
When the aspect ratio of your TV is 16:9  
(widescreen):  
Playback  
TV display  
Setting  
disc  
– When making HDMI connections, you  
cannot select [PROGRESSIVE].  
16:9  
16:9  
CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE  
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION  
TO THE “STANDARD DEFINITION” OUTPUT. IF  
THERE ARE QUESTIONS REGARDING OUR  
VIDEO MONITOR COMPATIBILITY WITH THIS  
MODEL 525P AND 625P DVD PLAYER, PLEASE  
CONTACT OUR CUSTOMER SERVICE CENTER.  
4:3  
2
*
*1: If the disc is not assigned to playback  
with panscan, it is played with  
letterbox.  
*2: The side of the picture may be  
stretched depending on the TV. In this  
case, check the screen size and aspect  
ratio of your TV.  
This unit is compatible with the complete line of  
YAMAHA products, including the projectors  
DPX-1300, DPX-830 and the plasma monitor  
PDM-4220.  
TIPS: To return to the previous menu, press 1.  
To clear the menu, press SETUP.  
28 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
4 Press 3/4to select one of the following  
Picture setting  
options.  
This unit comes with three predefined sets  
of picture color settings and one personal  
setting that you can define yourself.  
BRIGHTNESS  
Increase the value to brighten the picture  
or vice versa. Zero (0) is the average  
brightness setting value.  
1 In “VIDEO SETUP PAGE”, press 3/4to  
highlight [PICTURE SETTING], and then  
press 2.  
CONTRAST  
Increase the value to sharpen the picture  
or vice versa. Zero (0) is the average  
contrast setting value.  
STANDARD  
Select this for the standard picture setting.  
BRIGHT  
Select this to make the TV picture  
brighter.  
TINT  
Increase the value to darken the picture or  
vice versa. Zero (0) is the average tint  
setting value.  
SOFT  
Select this to make the TV picture softer.  
COLOR  
PERSONAL  
Increase the value to enhance the color in  
your picture or vice versa. Zero (0) is the  
average color setting value.  
Select this to personalize your picture  
color by adjusting the brightness, contrast,  
tint and color (saturation).  
5 Press 1/ 2to adjust the setting that best  
suits your personal preference.  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
6 Repeat steps 45 to adjust other color  
features.  
3 If you select [PERSONAL] in step 1,  
proceed to steps 47.  
7 Press ENTER/OK to confirm your  
selection.  
The “PERSONAL PICTURE SETUP”  
menu appears.  
Notes:  
– All picture settings are not available for  
HDMI output.  
PERSONAL PICTURE SETUP  
BRIGHTNESS  
CONTRAST  
TINT  
0
0
0
0
COLOR  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
29 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
1 In “VIDEO SETUP PAGE”, press 3/4to  
highlight [CLOSED CAPTION], and then  
press 2.  
Selecting the black level  
If you set the TV type to NTSC, set the  
black level shift to ON to improve the  
color contrast during playback. The black  
level setting has no effect if the TV type is  
set to PAL.  
ON  
Select this to enable the closed caption  
function.  
OFF  
1 In “VIDEO SETUP PAGE”, press 3/4  
to highlight [BLACK LEVEL], and then  
press 2.  
Select this to disable the closed caption  
function.  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
ON  
Select this to enhance the black level.  
OFF  
Select this for standard black level setting.  
HDMI setup  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
When you connect this unit to an HDMI  
compatible component via the HDMI jack,  
select the following video output settings  
depending on the connected component.  
WIDE SCREEN FORMAT  
Closed caption  
Set the aspect ratio of the projected  
images on the screen. This feature is only  
available for HDMI video output.  
Closed captions are data hidden in the  
video signals of specific discs and are  
invisible without the use of a special  
decoder. The difference between subtitles  
and captions is that subtitles are intended  
for hearing persons and captions are for  
the hearing impaired. Subtitles rarely show  
all of the audio. For example, captions  
show sound effects (e.g., “phone ringing”  
and “footsteps”), while subtitles do not.  
Before you select this function, please  
ensure that the disc contains closed  
caption information and your TV set also  
supports this function.  
SUPERWIDE  
Select to display 4:3 image on the 16:9  
screen with non-linear stretching (Center  
position of screen is stretched less than  
the side). This feature is not available when  
the resolution is 480p or 570p.  
4:3 PILLAR BOX  
Select to display 4:3 image on the 16:9  
screen without stretching.  
OFF  
No aspect ratio adjustment is made when  
this option is selected.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
30 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
HDMI VIDEO  
Enables you to adjust the resolution  
depending on the monitor you are using.  
Notes:  
– You cannot set [TV TYPE] when making  
HDMI connections.  
– When disconnecting the HDMI cable, the  
setting of [TV TYPE] may be changed. If  
Component video, S-video and Composite  
video output does not display correctly, see  
“Troubleshooting” on page 38 to set the  
correct TV type again.  
Note:  
– For settings other than [AUTO], HDMI  
video output may not be display properly if  
a resolution output setting is not supported  
by the HDMI-compatible monitor you are  
using. In that case, follow the steps below to  
return to the initial setting:  
1 Press OPEN/CLOSE / to open the  
disc tray.  
2 Press 1.  
Preference setup menu  
1 Press STOP (9) twice to stop playback  
(if necessary), and then press SETUP.  
3 Press ANGLE.  
Do not perform this operation while playing  
back a disc on this unit.  
2 Press 1/ 2to select “PREFERENCE  
PAGE”.  
480P  
3 Press ENTER/OK to confirm your  
selection.  
480 progressive-scan video  
576P  
576 progressive-scan video  
PREFERENCE PAGE  
720P  
AUDIO  
720 progressive-scan video  
SUBTITLE  
DISC MENU  
PARENTAL  
VR LIST  
1080I  
1080 interlace video  
MP3/JPEG NAV  
DIVX SUBTITLE  
PASSWORD  
AUTO  
The resolution is automatically selected to  
match the monitor you are using.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
31 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
2 Press 3/4to highlight a rating level for the  
inserted disc, and then press ENTER/OK.  
• To disable parental controls and have all  
discs play, select [8 ADULT].  
Audio, subtitle and disc menu  
These menus contain various language  
options for the audio, subtitles and disc  
menus recorded on the DVD-Video. For  
details, see “Setting the audio, subtitle and  
disc menu languages (DVD-Video only)”  
on page 13.  
3 Use the numeric buttons (0-9) to enter  
the six-digit password (see “Changing the  
password” on page 35).  
DVDs that are rated above the level you  
selected do not play unless you enter  
your six-digit password.  
Restricting playback with  
parental control  
Note:  
– Some DVDs are not encoded with a rating  
though the movie rating may be printed on  
the disc cover. The rating level feature does  
not work for such discs.  
Some DVDs may have a parental level  
assigned to the complete disc or to certain  
scenes on the disc. This feature lets you set  
a playback limitation level.  
The rating levels are from 1 to 8 and are  
country dependent. You can prohibit  
playback of certain discs that are not  
suitable for your children or play certain  
discs in alternative scenes.  
Playback of VR format  
There are two ways to play back a disc in  
VR (Video Recording) format: ORIGINAL  
and PLAY LIST. This feature is not available  
with non-VR format discs.  
1 In “PREFERENCE PAGE”, press 3/4to  
highlight [PARENTAL], and then press 2.  
1 In “PREFERENCE PAGE”, press 3/4to  
highlight [VR LIST], and then press 2.  
ORIGINAL LIST  
PREFERENCE PAGE  
Select this to play the originally recorded  
titles on the disc.  
AUDIO  
1 KID SAFE  
2 G  
SUBTITLE  
DISC MENU  
PARENTAL  
VR LIST  
3 PG  
PLAY LIST  
4 PG 13  
5 PGR  
6 R  
Select this to play the edited version of the  
disc. This feature is only available when a  
play list has been created.  
MP3/JPEG NAV  
DIVX SUBTITLE  
PASSWORD  
7 NC 17  
8 ADULT  
2 Press 3/4to highlight a setting, and then  
press ENTER/OK to confirm your  
selection.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
32 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
To play back a disc in VR format  
Thumbnail pictures appear on the TV  
screen.  
3 Press SETUP to close the setup menu.  
4 Press PLAY (B) to begin to play back the  
setting you selected.  
Previewing VR format  
5 During playback, press SCAN.  
A list appears on the TV screen.  
TYPE:TITLE  
SELECT(01-06):- -  
SELECT DIGEST TYPE:  
TITLE DIGEST  
EXIT  
MENU  
NEXT  
TITLE INTERVAL  
(Example of 6 thumbnails in the display)  
8 Use 1/ 2/3/4 to select a title or use the  
numeric buttons (0-9) to input the title  
number.  
6 Press 3/4to highlight either [TITLE  
DIGEST] or [TITLE INTERVAL].  
TITLE DIGEST  
• Press S/ Tto access the  
previous/next page.  
This function displays thumbnail pictures of  
titles on the screen. Up to six thumbnail  
pictures per page are displayed.  
• In ORIGINAL LIST mode, the originally  
recorded titles on the disc are  
displayed.  
9 Press ENTER/OK to confirm the  
selection.  
To quit the preview function  
• Use 1/ 2/3/4 to highlight [EXIT] and  
press ENTER/OK.  
• In PLAY LIST mode, every title in the  
play list is displayed.  
To return to the preview menu  
• Use 1/ 2/3/4to highlight [MENU] and  
press ENTER/OK.  
TITLE INTERVAL  
This function is used to divide and display  
the contents of each title being played back  
in regular intervals, making it easy to  
preview the recording. Up to six thumbnail  
pictures per page are displayed.  
• If the title being played back is short, the  
TITLE DIGEST function is performed  
instead.  
7 Press ENTER/OK to confirm the  
selection.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
33 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
GROUP2:  
MP3/JPEG menu  
Albanian (sq), Croatian (hr), Czech (cs),  
Hungarian (hu), Polish (pl), Romanian (ro),  
Slovak (sk), Slovenian (sl)  
MP3/JPEG Navigator can be set only if the  
disc was recorded with a menu. It allows  
you to select different display menus for  
easy navigation.  
GROUP3:  
Bulgarian (bg), Byelorussian (be),  
Macedonian (mk), Russian (ru),  
Serbian (sr), Ukrainian (uk)  
1 In “PREFERENCE PAGE”, press 3/4to  
highlight [MP3/JPEG NAV], and then  
press 2.  
GROUP4:  
WITHOUT MENU  
Hebrew (iw), Yiddish (ji)  
Select this to display all the files contained  
in the MP3/Picture CD.  
GROUP5:  
Turkish (tr)  
WITH MENU  
Select this to display only the folder menu  
of the MP3/Picture CD.  
3 Select a group, and then press  
ENTER/OK to confirm your selection.  
Notes:  
2 Press 3/4to select a setting, and then  
press ENTER/OK to confirm your  
selection.  
– Some discs cannot be played depending on  
disc characteristics or recording conditions.  
– Some external subtitle files may be  
displayed incorrectly or not at all.  
– For external subtitle files, the following  
subtitle format filename extensions are  
supported (note that these files are not  
shown within the disc navigation menu):  
.srt, .sub, .ssa, .smi  
– The filename of the movie file has to be  
repeated at the beginning of the filename  
for the external subtitle file.  
– The number of external subtitle files which  
can be switched for the same movie file is  
limited to a maximum of 10.  
Displaying DivX external subtitle  
files  
The font sets listed below are available for  
DivX external subtitle files. This setting  
allows you to see the proper font set on-  
screen to match the subtitle file.  
1 In “PREFERENCE PAGE”, press 3/4to  
highlight [DIVX SUBTITLE], and then  
press 2.  
2 Press 3/4to highlight one of the following  
language groups.  
GROUP1:  
Albanian (sq), Basque (eu), Catalan (ca),  
Danish (da), Dutch (nl), English (en),  
Faroese (fo), Finnish (fi), French (fr),  
German (de), Icelandic (is), Irish (ga),  
Italian (it), Norwegian (no),  
Portuguese (pt), Rhaeto-Romanic (rm),  
Scottish (gd), Spanish (es), Swedish (sv)  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
34 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
4 Enter the new six-digit password.  
Changing the password  
5 Enter the new six-digit password again to  
confirm the password.  
The same password is used for both  
parental control and disc lock. Enter your  
six-digit password when prompted on the  
screen. The default password is 000 000.  
6 Press ENTER/OK to confirm your new  
password.  
The new six-digit password is now valid.  
1 In “PREFERENCE PAGE”, press 3/4to  
highlight [PASSWORD], and then press 2  
to select [CHANGE].  
PBC (Playback control)  
You can turn on or off PBC. This feature is  
available only on Video CD 2.0 with the  
playback control (PBC) feature. For details,  
see “Playback control (PBC)” on page 18.  
PREFERENCE PAGE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
VR LIST  
Resetting the system  
Setting the DEFAULT function resets all  
options and your personal settings to the  
initial factory settings, except your password  
for PARENTAL and DISC LOCK.  
MP3/JPEG NAV  
DIVX SUBTITLE  
PASSWORD  
CHANGE  
1 In “PREFERENCE PAGE”, press 3/4to  
highlight [DEFAULT], and then press 2to  
select [RESET].  
2 Press ENTER/OK to enter the  
“Password Change Page”.  
2
Press ENTER/OK to confirm your selection.  
All settings are reset to the initial  
factory settings.  
OLD PASSWORD  
NEW PASSWORD  
CONFIRM PWD  
OK  
3 Use the numeric buttons (0-9) to enter  
your old six-digit password.  
• When doing this for the first time, enter  
“000 000”.  
• If you forget your old six-digit  
password, enter “000 000”.  
TIPS: To return to the previous menu, press 1.  
To exit from the menu, press SETUP.  
35 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Codes  
These codes can be used to select other languages. This does not affect the options  
in “AUDIO”, “SUBTITLE” or “DISC MENU”.  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Avestan  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
6665  
6985  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
7889  
7889  
9072  
9065  
6785  
6785  
6786  
7587  
6779  
7282  
6783  
6865  
7876  
6890  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7168  
7176  
7565  
German  
6869  
7573  
6976  
7178  
7185  
7265  
7269  
7290  
7273  
7279  
7285  
7383  
7379  
7368  
7365  
7369  
7385  
7375  
7165  
7384  
7465  
7486  
7576  
7578  
7583  
7575  
7577  
7573  
8287  
7589  
7586  
7579  
7574  
7585  
7574  
7679  
7665  
7686  
7666  
7673  
7673  
7673  
7678  
7684  
7666  
7775  
7771  
7783  
7776  
7784  
7186  
Gikuyu; Kikuyu  
Greek,  
Guarani  
Gujarati  
Hausa  
Hebrew  
Herero  
Hindi  
Hiri Motu  
Hungarian  
Icelandic  
Ido  
Indonesian  
Interlingua (International)  
Interlingue  
Inuktitut  
Inupiaq  
Irish  
Italian  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Khmer  
Kikuyu; Gikuyu  
Kinyarwanda  
Kirghiz  
Komi  
Korean  
Kuanyama; Kwanyama  
Kurdish  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosnian  
Breton  
Bulgarian  
Burmese  
Castilian, Spanish  
Catalan  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja  
Chichewa; Chewa; Nyanja  
Chinese  
Chuang; Zhuang  
Church Slavic; Slavonic;  
Church Slavonic; Church  
Chuvash  
Cornish  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
Dzongkha  
English  
Esperanto  
Estonian  
Faroese  
Fijian  
Finnish  
French  
Frisian  
Gaelic; Scottish Gaelic  
Gallegan  
Georgian  
Kwanyama; Kuanyama  
Lao  
Latin  
Latvian  
Letzeburgesch;  
Limburgan; Limburger;  
Limburger; Limburgan;  
Limburgish; Limburger;  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Manx  
36 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Codes  
These codes can be used to select other languages. This does not affect the options  
in “AUDIO”, “SUBTITLE” or “DISC MENU”.  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho, Navajo  
Navajo; Navaho  
Ndebele, North  
Ndebele, South  
Ndonga  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7886  
7868  
7882  
7871  
7869  
8369  
7868  
7879  
Sotho, Southem  
South Ndebele  
Spanish; Castilian  
Sundanese  
Swahili  
8384  
7882  
6983  
8385  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9065  
9085  
Swati  
Swedish  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Turkish  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Walloon  
Welsh  
Nepali  
Northern Sami  
North Ndebele  
Norwegian  
Norwegian Bokmål; Bokmål, 7866  
Norwegian Nynorsk;  
Nyanja; Chichewa; Chewa  
Nynorsk, Norwegian;  
Occitan (post 1500); Proven  
7878  
7889  
7878  
7967  
Old Bulgarian; Old Slavonic; 6785  
Old Church Slavonic; Old  
Old Slavonic; Church  
Oriya  
6785  
6785  
7982  
7977  
7983  
7983  
8073  
8065  
7065  
8076  
8084  
7967  
8083  
8185  
8277  
8279  
8278  
8285  
8377  
8371  
8365  
8367  
7168  
8382  
8378  
8368  
8373  
8375  
8376  
8379  
Oromo  
Ossetian; Ossetic  
Ossetic; Ossetian  
Pali  
Panjabi  
Persian  
Polish  
Portuguese  
Provençal; Occitan (post)  
Pushto  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zhuang; Chuang  
Zulu  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Russian  
Samoan  
Sango  
Sanskrit  
Sardinian  
Scottish Gaelic; Gaelic  
Serbian  
Shona  
Sindhi  
Sinhalese  
Slovak  
Slovenian  
Somali  
37 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the chart below when this unit does not function properly. If the problem  
you are experiencing is not listed below or if the instruction below does not help,  
set this unit to the standby mode, disconnect the power cord, and contact the  
nearest authorized YAMAHA dealer or service center.  
Problem  
Solution  
No power  
– Connect the AC power cord properly.  
– Press STANDBY/ON on the front panel to turn on the power.  
No picture  
– Refer to the manual supplied with your TV for correct Video In  
channel selection. Change the TV channel until you see the DVD  
screen.  
– Turn on your TV.  
– Check the video connection.  
No picture is displayed  
when you make HDMI  
connections (using the  
HDMI jacks)  
– Follow the steps below to change the [HDMI VIDEO] to [AUTO];  
1. Press OPEN/CLOSE (/) on the front panel or press and hold  
STOP (9) on the remote control to open the disc tray.  
2. Press 1on the remote control.  
3. Press ANGLE on the remote control.  
No picture is displayed  
when you do not use  
progressive scan  
connections (using the  
component video jacks)  
– Follow the steps below to turn off the progressive scan;  
1. Press OPEN/CLOSE (/) on the front panel or press and hold  
STOP (9) on the remote control to open the disc tray.  
2. Press 1on the remote control.  
3. Press MUTE on the remote control to deactivate progressive scan.  
This unit is set to Component/Interlaced video.  
Completely distorted  
picture or black/white  
picture or no picture  
– Check that the disc is compatible with this unit (see “Notes about  
discs/content format” on page 3).  
– Check that the TV Type of this unit is set to match that of the disc  
and your TV (see “Setting a color system for your TV” on page 11).  
Follow the steps below to change the setting of [TV TYPE].  
1. Press OPEN/CLOSE (/) on the front panel or press and hold  
STOP (9) on the remote control to open the disc tray.  
2. Press 2on the remote control.  
3. Press AUDIO on the remote control.  
Distorted picture  
– Occasionally, a small amount of picture distortion may appear  
depending on the disc being played back. This is not a malfunction.  
The screen size looks  
unnatural, or the caption is  
displayed only partially on  
the TV monitor or is not  
displayed at all  
– Check that the TV setting of this unit matches the screen size of your  
TV (see “Setting the TV display” on page 27).  
– Change the screen size and the aspect ratio of your TV.  
No sound or distorted  
sound  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
– For MP3/WMA files, check that the sampling rate and bit rate are compatible  
with this unit (see “Notes about discs/content format” on page 3).  
38 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Solution  
No audio at digital output  
– Check the digital connections.  
– If you are playing a DTS source, check that your receiver can decode  
DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 25).  
– If you are playing an MPEG-2 source, check that your receiver can  
decode MPEG-2. Otherwise, make sure “DIGITAL OUTPUT” is set  
to “PCM ONLY” (see page 25).  
– Check that the audio format of the selected audio language matches  
your receiver capabilities.  
Disc does not play  
– The CD-R/RW, DVD+R/RW/R DL and DVD-R/RW/R DL must be  
finalized.  
– Check that the disc label is facing up.  
– Check that the disc is defective by trying another disc.  
– If you have recorded a JPEG, MP3 or WMA disc yourself, check that  
your disc contains at least 10 JPEG picture files or 5 MP3/WMA music  
tracks.  
– For MP3/WMA files, check that the sampling rate and bit rate are  
compatible. For JPEG files, check that the resolution is compatible  
(see “Notes about discs/content format” on page 3).  
– Check the region code (see “Region codes” on page 3).  
Picture freezes  
momentarily during  
playback  
– Check the disc for fingerprints/scratches and clean it with a soft cloth  
wiping from center to edge.  
This unit does not respond  
to the remote control  
– Aim the remote control directly at the remote control sensor on the  
front panel.  
– Reduce the distance of the remote control from this unit.  
– Replace the batteries in the remote control.  
– Reinsert the batteries with their polarities (+/– signs) as indicated.  
Buttons do not work  
– To completely reset this unit, unplug the AC cord from the AC outlet  
for 5-10 seconds.  
This unit does not respond  
to some operating  
– Operations may not be permitted by the disc. Refer to the  
instructions of the disc jacket.  
commands during playback  
This unit cannot read CDs/  
DVDs  
– Use a commonly available CD/DVD lens cleaner to clean the lens  
before sending this unit for repair.  
Menu items cannot be  
selected  
– Press STOP (9) twice on the remote control before selecting Setup  
Menu.  
– Depending on the disc availability, some menu items cannot be  
selected.  
No sound during DivX  
movies playback  
– The audio code may not be supported by this unit.  
39 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Analog: Sound that has not been turned into  
numbers.Analog sound varies, while digital  
sound has specific numerical values.These jacks  
send audio through two channels, the left and  
right.  
DivX Ultra: DivX Ultra Certified products  
provide enhanced playback of advanced media  
features supported by the DivX Media Format.  
Key features include interactive video menus,  
subtitles, alternate audio tracks, video tags and  
chapter points.  
Aspect ratio: The ratio of vertical and  
horizontal sizes of a displayed image.The  
horizontal vs. vertical ratio of conventionalTVs.  
is 4:3, and that of widescreens is 16:9.  
DMF (DivX Media Format):The DivX Media  
Format supports advanced media features,  
adding controls for an interactive media  
experience: interactive video menus, chapter  
points, multi-language subtitles and alternate  
audio tracks.  
Audio output jacks: Jacks on the back of the  
DVD System that send audio to another system  
(TV, Stereo, etc.).  
Dolby Digital: A surround sound system  
Bit rate:The amount of data used to hold a given  
length of music; measured in kilobits per seconds,  
or kbps. Or, the speed at which you record.  
developed by Dolby Laboratories containing up to  
six channels of digital audio (front left and right,  
surround left and right, center and subwoofer).  
Generally, the higher the bit rate, or the higher the  
recording speed, the better the sound quality.  
However, higher bit rates use more space on a Disc.  
DTS: DigitalTheatre Systems.This is a surround  
sound system, but it is different from Dolby  
Digital.The formats were developed by different  
companies.  
Chapter: Sections of a picture or a music piece  
on a DVD that are smaller than titles.A title is  
composed of several chapters. Each chapter is  
assigned a chapter number enabling you to locate  
the chapter you want.  
HDMI: HDMI (High-Definition Multimedia  
Interface) is the first industry-supported,  
uncompressed, all-digital A/V (audio/video)  
interface.Providing an interface between anyA/V  
source (such as a set-top box or A/V receiver)  
and an audio/video monitor (such as a digital  
television - DTV), HDMI supports standard,  
enhanced or high-definition video as well as  
multi-channel digital audio using a single cable.  
HDMI transmits all ATSC HDTV standards and  
supports 8-channel digital audio, with bandwidth  
to spare to accommodate future enhancements  
and requirements.  
When used in combination with HDCP (High-  
bandwidth Digital Content Protection), HDMI  
provides a secure audio/video interface that  
meets the security requirements of content  
providers and system operations. For further  
information on HDMI, visit the HDMI website at  
“www.hdmi.org/”  
Component video output jacks: Jacks on the  
back of the DVD System that send high-quality  
video to aTV that has ComponentVideo In jacks  
(R/G/B,Y/Pb/Pr, etc.).  
Disc menu: A screen display prepared for  
allowing selection of images, sounds, subtitles,  
multi-angles, etc. recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when  
you use the digital audio output jacks.These  
jacks send audio through multiple channels,  
instead of just two channels as analog does.  
DivX: DivX is a popular media technology  
created by DivX, Inc. DivX media files contain  
highly compressed video with high visual quality  
that maintains a relatively small file size. DivX files  
can also include advanced media features like  
menus, subtitles, and alternate audio tracks.Many  
DivX media files are available for download online,  
and you can create your own using your personal  
content and easy-to-use tools from DivX.com.  
40 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
HDCP: HDCP (High-bandwidth Digital Content  
Protection) developed by Intel corporation, is a  
method to encrypt digital video and audio data  
for purpose of content protection. For further  
information on HDCP,visit the HDCP website at  
“www.digital-cp.com”.  
Play list:A list of selected titles to be played back  
in a specific order.This option is only available  
withVR format and must be created beforehand.  
Progressive scan: It displays all the horizontal  
lines of a picture at one time, as a signal frame.  
This system can convert the interlaced video  
from DVD into progressive format for  
connection to a progressive display. It  
dramatically increases the vertical resolution.  
Interactive menu: Interactive video menus  
offer unprecedented convenience and control so  
you can quickly navigate between various scenes  
or bonus features, and select from audio track  
and subtitle options.  
Region code: A system for allowing discs to be  
played back only in the region designated  
beforehand.This unit will only play discs that  
have compatible region codes.You can find the  
region code of your unit by looking on the  
product label. Some discs are compatible with  
more than one region (or ALL regions).  
JPEG: A very common digital still picture  
format.A still-picture data compression system  
proposed by the Joint Photographic Expert  
Group, which features small decrease in image  
quality in spite of its high compression ratio.  
MP3: A file format with a sound data  
S-video: Produces a clear picture by sending  
separate signals for the luminance and the color.  
You can use S-video only if yourTV has S-video  
input jack.  
compression system.“MP3” is the abbreviation  
of Motion Picture Experts Group 1 (or MPEG-1)  
Audio Layer 3. By using MP3 format, one CD-R  
or CD-RW can contain about 10 times as much  
data volume as a regular CD can.  
Surround: A system for creating realistic three  
dimensional sound fields full of realism by  
arranging multiple speakers around the listener.  
Parental control: A function of the DVD to  
limit playback of the disc by the age of the users  
according to the limitation level in each country.  
The limitation varies from disc to disc; when it is  
activated, playback will be prohibited if the  
Title:The longest section of a picture or music  
feature on DVD, music, etc., in video software,  
or the entire album in audio software. Each title  
is assigned a title number enabling you to locate  
the title you want.  
software’s level is higher than the user-set level.  
PCM (Pulse Code Modulation):A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used  
in conversion.  
Video output jack: Jack on the back of the  
DVD System that sends video to aTV.  
VR (Video Recording) format: A format  
which enables you to create a DVD disc that can  
be extensively re-edited.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for  
controlling reproduction. By using menu screens  
recorded on aVideo CD or SVCD that supports  
PBC, you can enjoy interactive-type software as  
well as software having a search function.  
41 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PLAYBACK SYSTEM  
TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)  
DVD Video  
Number of lines  
Playback  
625  
525  
Video CD & SVCD  
CD  
Multistandard  
(PAL/NTSC)  
PICTURE CD  
CONNECTIONS  
CD-R, CD-RW  
HDMI  
TYPE A x 1  
Cinch (green)  
Cinch (blue)  
Cinch (red)  
Mini DIN, 4 pins  
Cinch  
DVD+R, DVD+RW, DVD+R DL  
DVD-R, DVD-RW, DVD-R DL  
Y Output  
PB Output  
PR Output  
S-Video Output  
Video Output  
VIDEO PERFORMANCE  
Video (CVBS) Output  
S-Video output  
1 Vpp into 75 ohm  
Y: 1 Vpp into 75 ohm  
C: 0.3 Vpp into 75 ohm  
Y: 1 Vpp into 75 ohm  
PB PR: 0.7 Vpp into  
75 ohm  
Audio Output (L+R) Cinch  
Digital Output  
1 coaxial  
IEC60958 for CDDA/LPCM  
Component video output  
IEC61937 for MPEG 1/2, Dolby  
Digital and DTS  
AUDIO FORMAT  
CABINET  
Digital Dolby Digital/DTS/MPEG  
Compressed Digital  
Dimensions (w x d x h)  
Weight  
435 x 310 x 51 mm  
Approx. 2.6 Kg  
PCM  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
96, 128, 256, 320 kbps  
fs, 32, 44.1, 48 kHz  
64 kbps–192 kbps  
fs, 44.1, 48 kHz  
Stereo  
POWER SUPPLY  
MP3 (ISO 9660)  
WMA  
Power inlet  
120 V, 60 Hz  
Approx. 14 W  
< 1 W  
Power usage  
Power usage standby  
Analog Sound  
AUDIO PERFORMANCE  
DA Converter  
Signal-Noise (1 kHz)  
Dynamic range (1 kHz)  
DVD  
24 bit  
105 dB  
97 dB  
Specifications are subject to change without  
prior notice.  
fs 96 kHz  
2 Hz-44 kHz  
2 Hz-22 kHz  
2 Hz-22 kHz  
2 Hz-20 kHz  
2 Hz-20 kHz  
0.0035%  
fs 48 kHz  
fs 48 kHz  
fs 44.1 kHz  
fs 44.1 kHz  
SVCD  
CD/VCD  
Distortion and Noise (1 kHz)  
42 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2006  
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.  
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA  
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY  
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE  
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND  
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN  
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA  
Printed in China  
3139 245 22231  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westell Technologies Network Router 36R566 User Manual
Whirlpool Dehumidifier AD25BSS User Manual
Whirlpool Oven RS610PXGN1 User Manual
Whirlwind TV Cables W5 48 User Manual
Windsor Vacuum Cleaner 10120290 User Manual
X10 Wireless Technology Universal Remote UR86A User Manual
Yamaha Speaker IF2112 User Manual
Zanussi Dishwasher ZDT 6053 User Manual
Zanussi Pasta Maker 291164 User Manual
Zanussi Range 178015 User Manual