Yamaha DVD Player DV SL100 User Manual

U
DVD / VIDEO CD / CD PLAYER  
LECTEUR DE DVD  
DV-SL100  
OWNER’S MANUAL  
MODE D’EMPLOI  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC INFORMATION (for US customers)  
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!  
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly  
approved by Yamaha may void your authority, granted by the FCC, to use the product.  
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this  
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the  
USA.  
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices.  
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not  
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used accord-  
ing to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with  
FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference,  
which can be determined by turning the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:  
Relocate either this product or the device that is being affected by the interference.  
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial  
type cable.  
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you  
can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6600 Orangethorpe Ave. Buena Park, CA90622.  
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.  
We Want You Listening For A Lifetime  
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of  
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying  
blaring or distortion - and, most importantly, without affecting your sensitive hearing.  
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic  
Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive  
volume levels.  
CAUTION- Visible and invisible laser  
For Customer Use:  
radiation when open. Avoid exposure to beam.  
Read carefully the information located at the rear panel of the  
player and enter below the Serial No. Retain this information for  
future reference.  
Model No.  
Serial No. __________________________  
FOR CANADIAN CUSTOMERS  
To prevent electric shock, match wide blade of plug to wide slot and  
fully insert.  
This Class B digital apparatus complies with Canadian ICES-003.  
CAUTION  
Use of controls or adjustments or  
performance of procedures other than  
those specified herein may result in  
hazardous radiation exposure.  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.  
1 To assure the finest performance, please read this  
manual carefully. Keep it in a safe place for future  
reference.  
15 When not planning to use this unit for long periods of  
time (i.e., vacation), disconnect the AC power plug from  
the wall outlet.  
2
Install this unit in a well ventilated, cool, dry, clean place  
— away from direct sunlight, heat sources, vibration,  
dust, moisture, or cold. In a cabinet, allow about 2.5cm  
(1 inch) of free space all around this unit for adequate  
ventilation.  
16 Be sure to read the “Troubleshooting” section on  
common operating errors before concluding that this  
unit is faulty.  
17 Before moving this unit, press STANDBY/ON to set the  
unit in standby mode, then disconnect the AC power  
plug from the wall outlet.  
3 Locate this unit away from other electrical appliances,  
motors, or transformers to avoid humming sounds.  
4 Do not expose this unit to sudden temperature changes  
from cold to hot, nor locate this unit in an environment  
with high humidity (i.e., a room with a humidifier) to  
prevent condensation inside this unit, which may cause  
an electrical shock, fire, damage to this unit, and/or  
personal injury.  
5 Avoid installing this unit in a location where foreign  
objects may fall onto this unit or where this unit may be  
exposed to liquid dripping or splashing. On the top of  
this unit, do not place:  
WARNING  
TO REDUCETHE RISK OF FIRE OR ELECTRIC SHOCK, DO  
NOT EXPOSETHIS UNITTO RAIN OR MOISTURE.  
NOTE:  
Pictures shown maybe different between countries.  
Never make or change connections with the power  
switched on.  
When playing DTS encoded CDs, excessive noise will be  
heard from the analog stereo outputs.To avoid possible  
damage to the audio system, the consumer should take  
proper precautions when the analog stereo outputs of the  
player are connected to an amplification system.To enjoy  
DTS Digital Surround™ playback, an external 5.1-channel  
DTS Digital Surround™ decoder system must be  
connected to the digital output of the player.  
– Other components, as they may cause damage and/  
or discoloration on the surface of this unit.  
– Burning objects (i.e., candles), as they may cause fire,  
damage to this unit, and/or personal injury.  
– Containers with liquid in them, as they may fall,  
spilling the liquid and causing an electrical shock to  
the user and/or damage to this unit.  
6 Do not cover this unit with a newspaper, tablecloth,  
curtain, etc. in order not to obstruct heat radiation. If  
the temperature inside this unit rises, it may cause fire,  
damage to this unit, and/or personal injury.  
7 Do not plug in this unit to a wall outlet until all  
connections are complete.  
8 Do not operate this unit upside-down. It may overheat,  
possibly causing damage.  
9 Do not use excessive force on switches, knobs and/or  
cords.  
10 When disconnecting the power cord from the wall  
outlet, grasp the plug; do not pull the cord.  
11 Do not clean this unit with chemical solvents; this might  
damage the finish. Use a clean, dry cloth.  
12 Use only the voltage specified on this unit. Using this  
unit with a higher voltage than specified is dangerous  
and may cause fire, damage to this unit, and/or personal  
injury.YAMAHA will not be held responsible for any  
damage resulting from use of this unit with a voltage  
other than as specified.  
LASER SAFETY  
This unit employs a laser. Due to possible eye injury, only a  
qualified service person should remove the cover or  
attempt to service this device.  
CAUTION  
VISIBLE AND INVISIBLE LASER RADIATION WHEN  
OPEN.AVOID EXPOSURETO BEAM (WARNING  
LOCATION: INSIDE ON LASER COVERSHIELD ORTHE  
BACKPLATE OF SET)  
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Output Power  
10 mW (VCD/CD)  
Beam divergence 60 degree  
13 To prevent damage by lightning, disconnect the power  
cord from the wall outlet during an electrical storm.  
14 Do not attempt to modify or fix this unit. Contact  
qualifiedYAMAHA service personnel when any service  
is needed.The cabinet should never be opened for any  
reason.  
DANGER  
This unit emits visible laser radiation when open.Avoid  
direct eye exposure to beam.  
When this unit is plugged into a wall outlet, do not place  
your eyes close to the opening of the disc tray and other  
openings or look inside.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environmental Information ....................................................2  
Symbols Used in this Manual .................................................2  
Playback with multi-angles..............................................................13  
Inserting batteries into the Remote Control.....................7  
Using the Remote Control...............................................................7  
SUBTITLE language............................................................................19  
PARENTAL Control..........................................................................20  
MP3/JPEG NAV....................................................................................21  
Changing the Audio Language and/or format.................... 10  
Subtitles..................................................................................................... 10  
Special VCD & SVCD Features.......................................... 10  
Playback Control (PBC) .................................................................. 10  
Preview Function................................................................................. 11  
Troubleshooting....................................22  
Specifications.........................................23  
Maintenance ..........................................23  
Language Code......................................24  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing this unit. This Owner’s Manual  
explains the basic operation of this unit.  
Cleaning discs  
When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the centre out. Do not wipe in a  
circular motion.  
The region code for this set is 1.  
1
Do not use solvents such as benzine, thinner,  
commercially available cleaners, or antistatic spray  
intended for analog records.  
Since it is usual for DVD movies to be  
released at different times in different regions  
of the world, all players have region codes and discs can  
have an optional region code. This unit can play discs  
containing the identical region code, or mentioned as  
region “ALL”. If you load a disc of a different region code  
to this unit, you will see the region code notice on the  
screen. The disc will not playback, and should be  
unloaded.  
Symbols Used in this Manual  
The below symbols appear in some headings and notes  
with the following meanings:  
– Description refers to playback of DVD-  
video discs  
DVD  
Environmental Information  
VCD  
CD  
– Description refers to playback ofVideo CDs  
– Description refers to playback of Audio CDs  
This unit consists of materials which can be recycled and  
reused if disassembled by a specialised company. Please  
observe the local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
– Description refers to playback of Super  
VCDs  
SSVVCCDD  
Some DVD video discs require specific functions  
or allow only limited functions during playback.  
Ä” may appears on the TV screen which  
means that the function is not available on that  
specific DVD video disc.  
Supplied accessories  
– Remote control  
– Batteries (two AA size) for remote control  
– Audio/Video cable  
– Owner’s Manual  
Notes about discs  
– This unit is designed for use with DVD video, Video CD,  
Super video CD, Audio CD, CD-R, CD-RW (MP3 Supported),  
DVD+RW, DVD+R, DVD-R and DVD-RW.  
– CD-R and CD-RW cannot be played unless finalized.  
– Some discs cannot be played depending on the recording  
conditions such as PC environment and application software.  
The characteristics and condition of the discs; materials,  
scratches, curvature, and etc, may result in failure.  
– Be sure to use only CD-R and CD-RW discs made by  
reliable manufacturers.  
Manufactured under license from Dolby Laboratories. “Dolby”  
and the double-D symbol are trademarks of Dolby  
Laboratories.  
”DTS” and ”DTS Digital Out” are trademarks of Digital  
Theater Systems, Inc.  
– Do not use any non standard shaped discs (heart, etc.)  
– Do not use disc with tape, scals, or paste on it, damage  
to the unit may result.  
– Do not use a disc printed on its surface by a commercially  
available label printer.  
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S. patents and  
other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Functional Overview  
Front and Rear Panels  
STANDBY/ON  
– to turn this unit to standby mode or  
ON  
DiscTray  
9STOP  
– to stop playback  
/ OPEN/CLOSE  
– to open/close the disc tray  
B PLAY  
; PAUSE  
– to start playback  
– to interrupt playback  
S-VIDEO  
AC Power Cord  
– connect to S-Video input of your AV  
receiver  
– connect to a standard AC outlet  
AUDIO OUT (Left/Right)  
– connect to AUDIO inputs of your  
AV receiver or stereo system  
COMPONENTVIDEO  
– connect to component video inputs of  
your AV receiver  
OPTICAL  
– connect to DIGITAL INPUT of your  
AV receiver  
VIDEO  
– connect to Video inputs of your AV  
receiver  
COAXIAL  
– connect to DIGITAL INPUT of your  
AV receiver  
Caution: Do not touch the inner pins of the jacks on the rear panel.  
Electrostatic discharge may cause permanent damage to the unit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Functional Overview  
Remote Control  
|
TOP MENU/RETURN  
– display the top-level disc menu  
(DVD) / go back to previous menu  
(VCD)  
B/  
– turn this unit ON or go to  
standby-on mode  
0-9 numeric buttons  
MENU  
– access menu of a disc (DVD) /  
switch PBC on/off (VCD)  
– select numbered items in a menu  
ON SCREEN  
– access or remove player’s On  
Screen Display menu  
1 2 3 4  
– (left/right/up/down) select an item  
in the menu  
SETUP  
– access or remove player’s setup  
menu  
ENTER/OK  
– acknowledge menu selection  
T
S
– search backward* / go to a  
previous chapter or track  
– search forward* / next chapter or  
track  
SUBTITLE  
– subtitle language selector  
STOP ( 9)  
– stop playback  
ANGLE  
– select DVD camera angle  
PLAY ( B)  
– start playback  
ZOOM  
– enlarge video image  
PAUSE ( ;)  
– pause playback temporarily /  
frame-by-frame playback  
AUDIO  
– audio language and format  
selector  
REPEAT  
– repeat chapter, track, title, disc /  
shuffle chapter, track  
A-B  
– repeat a specific segment  
SCAN  
– preview the content of a track or  
whole disc (VCD) / play the first 6  
seconds or less of each track (CD)  
MUTE  
– disable or enable sound output  
* Press and hold button for about two seconds.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparation  
Note:  
General Notes on connections  
– If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will produce a  
strong, distorted sound or no sound at all. Make sure to  
select the appropriate audio format at menu screen  
included on the disc.  
Pressing AUDIO once or more may change not only audio  
languages but also audio formats, and the selected format  
appears for several seconds on the status window.  
Never make or change connections with the power  
switched on.  
Depending on the equipment you wish to connect, there  
are various ways you could connect this unit. Possible  
connections are shown in the following drawings.  
Please refer to the manuals of other equipment as  
necessary to make the best connections.  
Do not connect this unit via your VCR. The video quality  
could be distorted by the copy protection system.  
Do not connect this unit’s audio out jack to the phono in  
jack of your audio system.  
Analog Connections  
Use audio/video cable supplied with this unit to connect  
AUDIO OUT L (left) and R (right) jacks of this unit to  
corresponding input jacks of your audio equipment such  
as Stereo amplifier.  
Digital Connections  
This unit has COAXIAL and OPTICAL digital out jacks.  
Connect one or both of them to your AV receiver  
equipped with Dolby digital, DTS, or MPEG decoder  
using each specific cable (separate purchase).  
R
L
(supplied)  
C
O
R
L
COAXIAL  
IN  
OPTICAL  
IN  
AV receiver  
1
CD/DVD  
Stereo  
amplifier  
R
L
You will need to set this unit’s digital output to  
All (see ‘DIGITAL OUTPUT’).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Preparation  
S-Video terminal <A>  
Video Connections  
S (separate) video connection achieves a clearer picture  
than composite video connection by separating color and  
luminance when transmitting signals. Use commercially  
available S-video cable. Receiver (and TV) with S-video  
input is required.  
If your AV receiver has video output jacks, connect your  
receiver (and then to your TV) so that you can use one  
TV for several different video sources (LD, VCR etc.) by  
simply switching the input source selector of your  
receiver.  
The player has three types of video output jacks. Use one  
of them in accordance with the input jacks of the  
equipment to be connected.  
Component Video terminal <B>  
Component video connection achieves high fidelity in  
reproducing colors (better performance than S-video  
connection), separating video signal into luminance (Y,  
terminal color-coded as green), and color difference (Pb,  
blue/Pr, red). Use commercially available coaxial cables.  
Receiver (and TV) with component input is required.  
Observe the color of each jack when connecting. If your  
receiver does not have component output jacks,  
connecting the player’s component output directly to  
your TV’s component input can reproduce better video  
image.  
(supplied)  
V
<A>  
<B>  
<C>  
S
Y
PBCB  
PRCR  
S VIDEO  
INPUT  
COMPONENT  
VIDEO IN  
VIDEO  
Composite Video terminal <C>  
AV receiver  
Use audio/video cable supplied with this unit when  
connecting the player to your receiver.  
VIDEO  
OUT  
COMPONENT  
S VIDEO  
VIDEO OUT OUT  
VIDEO  
IN  
COMPONENT  
VIDEO IN  
S VIDEO  
IN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Preparation  
Inserting batteries into the Remote  
Control  
Open the battery cover by pressing in the tab, then lift off  
the cover.  
Insert batteries with the correct polarity as indicated by  
the + and - symbols inside the battery compartment.  
Close the cover.  
NTSC/PAL Conversion  
This player is equipped with a NTSC/PAL conversion  
feature to convert the video output of the disc to match  
your TV system. The conversions supported are as  
below. To activate the conversion, refer to “TV TYPE”:  
1
2
3
Output format  
Selected mode  
Disc  
Type  
Format  
NTSC  
PAL  
MULTI  
NTSC  
PAL  
NTSC  
PAL  
NTSC  
PAL  
-
+
DVD  
NTSC  
NTSC  
NTSC  
PAL  
PAL  
PAL  
NTSC  
PAL  
NTSC  
PAL  
VCD  
+
-
Notes:  
– “MULTI” can only be selected when using a TV that has  
both the NTSC and PAL systems.  
– Slight picture distortions may occur due to this conversion.  
This is normal. Thus, the “MULTI” is most suitable for the  
best picture quality.  
CAUTION!  
– Remove batteries if they are exhausted or not to  
be used for a long time.  
– Do not use old and new or different types of  
batteries in combination.  
– Batteries contain chemical substances, so they  
should be disposed off properly and kept away  
from children.  
Turning on the power  
1
2
3
Connect the AC power cord to the power outlet.  
Turn on the TV and your AV receiver.  
Select the appropriate input source at the AV receiver  
that was used to connect to this unit. Refer to the  
equipment owner’s manual for detail.  
Using the Remote Control  
Direct the remote control at the remote sensor of the  
DVD player.  
Do not drop or give the remote control a shock.  
Do not leave the remote control in extremely hot or  
humid places.  
Do not spill water or put anything wet on the remote  
control.  
4
5
Turn this unit on.  
Set the TV to the correct Video IN channel. (eg. EXT1,  
EXT2, AV1, AV2, AUDIO/VIDEO, etc. (Refer to your TV  
owner’s manual for detail)  
The front display lights up and the default screen  
appears on the TV.  
Smart Power On/Off  
When in STOP mode, the DVD player will switch to  
standby mode after 15 minutes without any operations  
for saving energy. It is easily reactivated by pressing the  
POWER or PLAY on the remote control or the  
STANDBY/ON button on the front panel.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Operation  
Note: Long press of the ¡1or 2till switch on backward  
or forward search.  
Basic Playback  
Press STANDBY/ON on the front panel to turn on the  
DVD player.  
1
2
DVD VCD CD SVCD  
SEARCH  
Press /(OPEN/CLOSE) on the front panel to open disc  
loading tray.  
Place the chosen disc in the tray, with the label facing up.  
Press /(OPEN/CLOSE) again to close the tray.  
After recognizing this disc, the player begin to  
playback automatically.  
1
To search the contents in fast speed, press 2or 1for fast  
forward/backward searching.  
Press 2or 1again to increase the speed for searching.  
Press PLAY to return to normal playback.  
3
4
2
3
Slow Motion  
DVD  
If you press PLAY when the tray is open, this unit  
closes the tray and starts playback.  
1
2
3
To get a slow motion effect during playback, press 3or  
4.  
Press 3or 4again, you can get different playback  
forward/backward speeds.  
Press PLAY to return to normal play back.  
VCD SVCD  
1
2
To get a slow motion effect during playback, press 4.  
Press 4again, you can get different playback forward  
speeds.  
3
Press PLAY to return to normal play back.  
Note: The SLOW BACKWARD function is not available for  
VCD/Super VCD discs.  
Notes:  
– DVDs may have a region code. Your player will not play  
discs that have a region code different from the region code  
of your player.  
Audio control during playback  
– If ‘DISC LOCK’ is set to LOCK and the disc inserted is not  
authorized, the 6-digit code must be entered and/or the disc  
must be authorized (see ‘DISC LOCK’).  
DVD VCD CD SVCD  
MUTE  
1
2
Press MUTE to disable the sound output.  
Press MUTE again to deactivate the mute.  
Audio channel selection  
VCD CD SVCD  
General Operation  
Note: All instructions set out below refer to the remote  
control, unless otherwise stated.  
1
Super VCD has two stereo audio channels which are  
used for playing karaoke or the audio language selection.  
(for instance, you can choose one channel for only the  
music background of the song while you play the  
karaoke.)  
Press AUDIO to select the audio channels you want.  
VCD has only one stereo audio channel, you can select  
STEREO, MONO LEFT, MONO RIGHT or MIX-  
MONO by pressing AUDIO.  
STEREO: Output the left and right audio channels of  
the disc through the left and right audio jacks accordingly.  
MONO LEFT: Output the left audio channels of the  
disc through the left and right audio jacks.  
MONO RIGHT: Output the right audio channels of  
the disc through the left and right audio jacks.  
MIX-MONO: each of the audio jacks can output the  
same audio effect as stereo.  
Video control during playback  
DVD VCD CD SVCD  
STOP  
2
3
1
You can resume the play from the point at which you  
stopped last time, if you just press STOP once. It will start  
from the beginning if you press STOP twice to stop  
playback.  
DVD VCD CD SVCD  
PAUSE/STEP  
1
2
To get a still picture, press PAUSE during playback.  
To step forward to the next frame picture, press PAUSE  
again.  
It resumes to the normal playback for CD.  
To resume normal playback, press PLAY.  
3
1
SKIP  
Press ¡1or 2briefly during playback to go to the next  
chapter/track or to return to the beginning of the currect  
chapter/track respectively.  
2
3
Press ¡1twice briefly to step back to the previous  
chapter/track.  
To go directly to any chapter/track, enter the chapter/  
track number using the numeric buttons and press  
ENTER/OK.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Operation  
OSD (On-Screen Display)  
Repeat and Shuffle  
This function will provide some information about your  
playing disc and a rough transferring speed of the video  
data on the screen.  
DVD  
Each time you press REPEAT, the Repeat/Shuffle mode  
Press ON SCREEN.  
changes as follows;  
The Status window appears on the TV.  
Chapter Repeat*  
Repeat/Shuffle Off Shuffle Repeat  
* This feature may not be available with some discs.  
VCD CD  
Title Repeat  
DVD VCD  
Title/Chapter/Track selection  
Shuffle  
1
Press 34to select “TITLE” or “CHAPTER” (DVD) or  
“TRACK” (VCD).  
Press ENTER/OK.  
Select a title, chapter or track number using the numeric  
buttons.  
SVCD  
2
3
With PBC OFF,  
Each time you press REPEAT, the Repeat/Shuffle mode  
changes as follows;  
DVD VCD  
Time Search  
1
Press 34to select “TT TIME” or “CH TIME”(DVD) or  
“TRACK TIME” or “DISC TIME”(VCD).  
“TT TIME” refers to the total time of the current title,  
and the “CH TIME” refers to the total time of the current  
chapter.  
Press ENTER/OK.  
Enter hours, minutes and seconds from left to right using  
the numeric buttons. (e.g. 0:34:27)  
Track Repeat  
Repeat/Shuffle Off  
Disc Repeat  
Shuffle Repeat Shuffle  
DVD VCD  
CD  
SVCD  
Repeat A-B  
2
3
DVD-Video Discs: repeat a sequence in a title  
Video and Audio CDs: repeat a sequence in a track  
Press A-B at your chosen starting point.  
Press A-B again at your chosen end point.  
The repeat sequence begins.  
1
2
DVD  
Audio/Subtitle/Angle  
You can change “AUDIO”, “SUBTITLE” or “ANGLE” if  
available on the disc you are playing.  
3
To exit the sequence, press A-B.  
1
2
3
Press 34to select “AUDIO”, “SUBTITLE” or “ANGLE”.  
Press ENTER/OK.  
For Audio and Subtitle,  
Press 34to highlight your selection and press ENTER/  
DVD VCD CD SVCD  
Disc Resume  
This player can resume playback of the last 5 discs, even  
if the disc was ejected or the power switched off.  
Load one disc, which is one of the last 5 discs.  
Press PLAY when DVD player is recognizing the disc. If  
the information of this disc has been stored in the  
memory of DVD player, it will be played back from the  
stop point last time.  
OK.  
1
2
or  
For Angle,  
Select an angle using the numeric buttons.  
DVD VCD  
Repeat/Time Display  
1
2
3
Press 34to select “REPEAT” or “TIME DISP.”.  
Press ENTER/OK.  
Press 34to highlight your selection and press ENTER/  
OK.  
CD  
Time display  
Each time you press ON SCREEN, the time display  
changes as follows;  
Total Elapsed  
Single Remain  
Total Remain  
Single Elapsed  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operation  
DVD VCD SVCD  
Zoom  
Changing the Audio Language and/or  
format  
Press AUDIO repeatedly to select the different  
DVD  
The Zoom function allows you to change the image size.  
Press ZOOM to activate the function.  
Use 3412to view other parts of the zoomed  
picture.  
Playback will continue.  
Zoom function is also effective when the playback is  
paused.  
1
languages.  
Note: The function will be activated only if the DVD is  
recorded with multi-language audio tracks.  
DVD SVCD  
Subtitles  
2
Press ZOOM repeatedly to return to the original size.  
Press SUBTITLE repeatedly to select the different  
subtitles.  
Special DVD Features  
Note: The function will be activated, only if the DVD or  
Super VCD is recorded with multi-subtitles.  
DVD  
Playing a Title  
A DVD disc may have one or more titles. This depends  
on the content (a movie, video clips, a drama series, etc.)  
on the disc.  
Special VCD & SVCD Features  
Playback Control (PBC)  
PBC function allows you to enter the index menu which  
is used to select a track after loading the VCD & SVCD  
disc.  
If you want to activate the function during the playback or  
after pressing STOP twice,  
Press MENU to set the PBC On.  
Pay attention to the hint on the screen.  
Use ¡1or 2to select the page you like.  
If the items of the index menus are numbered, press  
the appropriate numeric buttons.  
Press ENTER/OK.  
After you load a disc, information about the content  
shows on the screen waiting for your selection. You can  
also press TOP MENU to turn back to the title menu  
during playback.  
Press the appropriate numeric buttons or 3412to  
highlight your selection.  
Press ENTER/OK to confirm.  
1
2
DVD  
Playing a Chapter  
When you have selected a title, it may include one or  
more chapters.  
Any time you want to watch another chapter during  
playback, press MENU to turn back to the chapter menu  
(If disc has chapter menu).  
3
Press RETURN to enter the index menu during the  
playback.  
Press the appropriate numeric buttons or 3412on  
the remote control to highlight your selection.  
Press ENTER/OK.  
After a chapter has been selected, you also can press  
¡1or 2to make a change.  
Notes:  
– The content of the index menu depends on the disc.  
Please refer to the disc’s instructions for details.  
– If the disc doesn’t include the PBC information, this  
function will have no effect.  
If you want to skip the index menu and playback  
directly from the beginning,  
DVD  
Camera Angle  
Some discs contain scenes which have been shot  
simultaneously from various angles.  
This DVD player allows you to select the desired camera  
angle.  
1
Press MENU to switch off the function.  
Press ANGLE on your remote control.  
Note: The function is available only for the DVD discs which  
have several angles recorded.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Operation  
2 DISC INTERVAL  
VCD SVCD  
Preview Function  
This function is used to divide a disc into six parts by  
regular intervals and display them on one page to help  
you preview the whole disc.  
Press SCAN to enter previewing menu.  
Press 34to highlight “TRACK DIGEST”, “DISC  
INTERVAL” or “TRACK INTERVAL”.  
Press ENTER/OK to open one option.  
SELECT DIGEST TYPE:  
TRACK DIGEST  
DISC INTERVAL  
TRACK INTERVAL  
TYPE : DISC INTERVAL  
SELECT (01–06) : – –  
EXIT  
MENU  
After you enter the menu of any digest type,  
To quit preview function: Press 3412to highlight  
EXIT and press ENTER/OK.  
- To choose the desired track, press 3412to highlight  
the second line and input your numerical selection next  
to “SELECT” and press ENTER/OK.  
- You can also select a track by highlighting the preview  
screen using 3412 and pressing ENTER/OK.  
To return to the previewing menu for selecting the  
other digest type: Press 3412to highlight MENU and  
press ENTER/OK.  
1 TRACK DIGEST  
This function will minimize the picture of every track in  
order to display every six of these tracks on the screen to  
help you know the content of every track on the disc.  
3 TRACK INTERVAL  
This function is used to divide a single track into six parts  
by regular intervals and display them on one page to help  
you preview the selected track.  
TYPE :TRACK  
SELECT (01–17) : – –  
EXIT  
MENU  
NEXT  
TYPE :TRACK 01 INTERVAL  
SELECT (01–06) : – –  
EXIT  
MENU  
- To choose the desired track, press 3412to highlight  
the second line and input your selected track number  
next to “SELECT”.  
Select the others from the current six by pressing the  
¡1or 2to open the previous or next page and press  
ENTER/OK.  
- To choose the desired track, please press 3412to  
highlight the second line and input your numerical  
selection next to “SELECT” and press ENTER/OK.  
- You can also select a track by highlighting the preview  
screen using 3412 and pressing ENTER/OK.  
- You can also select a track by highlighting the preview  
screen using 3412 and pressing ENTER/OK.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
JPEG & MP3 CD Playback  
This player can playback JPEG format pictures and MP3  
files on a personally recorded CD-R/RW disc or  
commercial CD, and is compatible with Kodak Picture  
CD. This player does not support PROGRESSIVE JPEG.  
Playback pictures or songs one by one automatically.  
Album and track selection.  
Play Mode  
Auto Playback  
If you choose WITHOUT MENU, the DVD player will  
automatically playback MP3 CD in sequence when it is  
loaded.  
Repeat (disc / album / track / picture).  
Select any music or pictures from the disc to playback  
them together.  
Maximum numbers of files in one folder are 500.  
Maximum number of folders in one layer are 500.  
Maximum nested directory is eight levels.  
Maximum 13 characters are supported.  
The file names, MP3, JPG, JPE, and JPEG, are supported.  
Maximum files Programmable is 100.  
Repeat / Shuffle  
When the JPEG CD/MP3 CD menu is shown on the  
screen, Press REPEAT repeatedly, the button will display  
different option,  
Repeat One: One file will be replayed time after time.  
Repeat Folder: All files in this folder will be replayed  
time after time.  
Shuffle: All files in this folder will be played at random  
without any repeat.  
Folder: All files in this folder will be played.  
If you press REPEAT during playback, the option will be  
displayed on the screen accordingly.  
During Shuffle mode, you can skip tracks by pressing 2™.  
During Shuffle mode, you can return the head of track by  
pressing ¡1.  
General Operation  
If you choose WITH MENU in the Setup Menu (Please  
refer to the MP3 & JPEG navigator below), the JPEG CD/  
MP3 CD menu will be shown on the screen before  
playback.  
00:00 00:00  
1
001  
002  
003  
004  
005  
006  
At any time during JPEG playback, press MENU to return  
to the menu.  
To open the selected folder, press ENTER/OK.  
The menu shows six files or folders at a time. To move  
to the next (or previous) page, press 2(or ¡1).  
You cannot record the MP3 audio output from digital  
audio output jacks.  
MP3 & JPEG Navigator  
To select a different playback method, follow the steps  
below.  
1
2
3
4
5
6
At STOP mode, press SETUP to open the setup menu.  
Press 12to highlight PREFERENCE icon.  
Press 4to open the PREFERENCE menu.  
Press 34to highlight the MP3/JPEG NAV menu.  
Press 2to enter the menu.  
Press 34to highlight the WITHOUT MENU or WITH  
MENU item.  
WITHOUT MENU: automatically playback all files in  
according date sequence (MP3 only).  
WITH MENU: playback files in the selected folder.  
Press ENTER/OK to confirm your selection.  
7
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
JPEG & MP3 CD Playback  
Playback with multi-angles  
Special JPEG Features  
Function Introduction  
JPEG CD is a disc with a collection of JPEG format  
pictures, and all extension filenames should end with  
‘JPG’. The CD can be recorded on any computer, and  
pictures may be from digital camera or scanner. If the  
customers prefer, they can make this CD become a  
Digital Album.  
When displaying one picture on TV screen  
Press 3412to get different effects.  
3: Flip the picture vertically.  
4: Flip the picture horizontally.  
1: rotate the picture anti-clockwise.  
2: rotate the picture clockwise.  
Wipe Effect  
Press ANGLE repeatedly to choose different wipe  
You can choose any general function introduced in  
General Operation, besides, you also can,  
Display the thumbnails of 12 pictures.  
Zoom the picture.  
Rotate the picture.  
Flip the picture vertically or horizontally.  
Scan pictures by different effects.  
effects.  
Special MP3 Features  
Function Introduction  
“MP3” stands for “MPEG Audio Layer-3” and is a part of  
the MPEG standard. A CD can store up to 10 hours of  
MP3 audio, which is nearly 10 times as much as an Audio  
CD. Each song is recorded as a file. You can choose any  
general function introduced in General Operation. You  
can also choose different playback speeds.  
Preview Function  
This function shows the content of the current folder or  
the whole disc.  
Press STOP during playback of JPEG pictures. You will see  
the thumbnails of 12 pictures on the screen.  
1
JPEG and MP3 simultaneous playback  
1
2
Firstly playback MP3 music according to the instructions  
introduced in playback Selection.  
Then select a picture to playback. Refer to the  
instructions introduced in playback Selection.  
Now the pictures will be played back in sequence  
together with MP3 music.  
3
To quit simultaneous playback, press MENU to return to  
the JPEG CD/MP3 CD menu, then pictures will be  
stopped. After that, press STOP, then MP3 music will be  
stopped as well.  
2
3
Press ¡1or 2to display the other pictures on the next  
or the previous page.  
Press 3412to highlight one of them and press ENTER/  
OK to playback, or,  
Note: In the function of JPEG and MP3 Simultaneous  
Playback, ¡1and 2are invalid for MP3.  
Move the cursor to highlight  
on the bottom of the  
page to start playback from the first picture on the  
current page.  
4
Press MENU to go to the JPEG CD/MP3 CD menu.  
Zoom picture  
During playback or pause, press ZOOM to display the  
picture with different scales.  
Press 3412to view the rest of the zoomed picture.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Setup Menu  
PROGRAM (not for JPEG / MP3 CD)  
Press 34to choose “PROGRAM”.  
Press 2to move the cursor to the field of the submenu  
to choose the item Input menu.  
Input menu: Enter the Program item.  
Press ENTER/OK to enter the program page.  
Basic Operation  
Press SETUP in the STOP mode to enter the Setup  
Menu.  
Press 12to enter the submenu or return to the previous  
menu.  
Press 34to highlight the desired menu.  
Press SETUP to quit the setup menu.  
When you quit the setup menu, the settings will be  
stored in the player’s memory even if the player is  
switched to power off.  
1
2
1
2
3
3
4
PROGRAM:TRACK(01-13)  
1
2
3
4
5
6
7
__  
02  
01  
05  
__  
03  
__  
__  
__  
__  
8
9
10  
General Setup menu  
EXIT  
START  
NEXT  
Some settings need to be made in this menu. They are:  
“DISC LOCK”, “PROGRAM”, “OSD LANGUAGE” and  
“SCREEN SAVER”.  
Input your favorite track  
1
2
Input valid track number by pressing the numeric buttons.  
Press 3412to move the cursor to the next selected  
position.  
Follow the steps below:  
If the track number is more than ten, press 2to  
open the next page and go on programing, or press 341  
2to highlight NEXT button, and then press ENTER/OK.  
Repeat this steps to input another track number until the  
whole program is completed.  
- - GENERAL SETUP PAGE - -  
DISC LOCK  
PROGRAM  
OSD LANGUAGE  
SCREEN SAVER  
3
Remove a track  
1
2
Press 3412to move the cursor to the track you want  
to remove.  
Press ENTER/OK or PLAY to remove this track from the  
program menu.  
1
2
Press SETUP to enter the setup menu.  
Press 12to choose the GENERAL SETUP icon  
.
Playback tracks  
When programing is completed,  
1
2
Press 3412to move the cursor to the START button.  
Press ENTER/OK.  
DVD player will playback the selected tracks under  
the programed sequence.  
DISC LOCK  
When the disc is locked, the player will store its specific  
code into the memory for future identification. For the  
next playback, the DVD player will prompt you to enter  
the password. Then, press ENTER/OK to load the disc.  
Press 34to highlight “DISC LOCK”.  
Enter its submenu by pressing 2.  
Lock: Lock the disc being played.  
Unlock: unlock the disc.  
Quit the program playback  
1
2
In the Program menu,  
Press 3412to move the cursor to the EXIT button.  
Press ENTER/OK to quit this menu.  
1
2
3
Press 1to return to the General Setup Page.  
Stop the program playback  
During playback of the programmed tracks, press STOP  
once. Then after you press PLAY, the DVD player will  
start resume-playback.  
Press STOP twice to cancel the resume-function.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setup Menu  
Repeat the program playback  
Audio Setup menu  
During playback of the programmed tracks, press  
There are items included in Audio Setup Page such as  
“SPEAKER SETUP”, “DIGITAL AUDIO SETUP”,  
“EQUALIZER” and “3D”.  
REPEAT. The programed tracks can be played again.  
Note: If you select Shuffle mode by pressing REPEAT several  
times, the DVD player cancels program playback.  
OSD LANGUAGE  
This option is to select a language for information  
displayed on TV screen.  
- - AUDIO SETUP PAGE - -  
SPEAKER SETUP  
DIGITAL AUDIO SETUP  
EQUALIZER  
3D  
1
Press 34to highlight “OSD LANGUAGE” in the  
General Setup menu.  
2
3
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
language.  
4
5
Press ENTER/OK to confirm.  
Press 1to return to the General Setup Page.  
1
2
Press SETUP to enter the setup menu.  
Press 12to choose the AUDIO SETUP icon  
.
SCREEN SAVER  
This function is used to turn the screen saver on or off.  
Press 34to highlight “SCREEN SAVER” in the General  
Setup menu.  
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
SPEAKER SETUP  
1
This menu contains setup options for your analog audio  
output, such as “DOWNMIX”, “DRC” (Dynamic Range  
Compression) etc. which makes the setup system  
reproduce high quality surround sound.  
2
3
DOWNMIX  
On: In STOP or No DISC mode, if no actions are  
performed within 5~6 minutes, the screen saver will be  
activated.  
Off: Screen saver is disabled.  
Press ENTER/OK.  
1
2
3
Press 34to highlight the “DOWNMIX”.  
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
4
5
Press 1to return to the General Setup Page.  
LT/RT  
This option should be used only if your DVD player  
is connected to a Dolby Prologic decoder.  
STEREO  
This option will downmix Dolby Digital signals directly  
into analogue stereo from L/R jacks.  
VIRTUAL SURROUND  
This option will reproduce the surround channels  
virtually.  
4
5
Press ENTER/OK.  
Press 1to return to the Audio Setup Page.  
DRC (Dynamic Range Compression)  
The DVD player will compress the dynamic range of its  
sound output for late-night listening.  
Press 34to highlight “DRC”.  
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
1
2
3
ON: Enable DRC  
OFF: Disable DRC  
4
5
Press ENTER/OK.  
Press 1to return to the Audio Setup Page.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
DIGITAL AUDIO SETUP  
EQUALIZER (Sound Mode)  
In this menu, you can set up the digital audio output signal  
from the digital jacks, such as coaxial etc.  
The “EQUALIZER” allow you to select from various  
preset modes that control the frequency bands of sound  
to optimize certain musical styles.  
It greatly enhances the excitement and enjoyment  
of your favourite music.  
Press 34to highlight the “EQUALIZER”.  
Enter its submenu “SOUND MODE” by pressing 2.  
Press 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
NONE: Playback the disc under the original sound  
effect.  
DIGITAL OUTPUT  
1
2
3
Press 34to highlight DIGITAL OUTPUT.  
Enter its submenu by pressing 2.  
1
2
3
4
Press 34to highlight the selected item.  
ALL: Original digital signals output.  
PCM Only: If your receiver is PCM-compatible, or  
your receiver can not decode MPEG-2 or Dolby Digital,  
choose this option. This feature can not be applied to  
DTS.  
4
5
Press ENTER/OK.  
Press 1and return to the Audio Setup Page.  
5
6
Press ENTER/OK.  
Press 1to return to the Audio Setup Page.  
Note: If DIGITAL OUTPUT is set to “ALL”, all audio settings  
except MUTE are invalid.  
Note: The sound may be distorted if the selected sound  
mode is incompatible with the disc contents.  
In that case, select another sound mode or “NONE”.  
LPCM OUTPUT  
In this menu, you can select PCM digital output between  
48kHz and 96kHz.  
3D (REVERB MODE)  
1
2
3
Press 34to highlight the “LPCM OUTPUT”.  
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
48K: 96kHz (if available on disc) PCM data stream will  
be converted to 48kHz.  
96K: If the 96kHz disc is copy protected, the digital  
output will be muted to comply with the standards.  
Press ENTER/OK.  
The “3D” can simulate the echoes and frequency  
response of some particular places so as to make you feel  
like personally on the place. The choices are OFF,  
CONCERT, LIVING ROOM, HALL, ARENA, and  
CHURCH.  
Press 34to highlight the “3D”.  
Enter its submenu “REVERB MODE” by pressing 2.  
Press 2.  
1
2
3
4
4
5
Move the cursor by pressing 34to highlight the selected  
item.  
Press 1to return to the Audio Setup Page.  
OFF: Playback the disc under the original sound effect.  
Press ENTER/OK.  
Press 1to return to the Audio Setup Page.  
5
6
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup Menu  
TV DISPLAY  
Video Setup menu  
There are items included in Video Setup menu such as  
“TV TYPE”, “TV DISPLAY”, “CLOSED CAPTION”,  
“PROGRESSIVE” and “PICTURE SETTING”.  
4:3  
PANSCAN  
4:3  
- - VIDEO SETUP PAGE - -  
TV TYPE  
LETTERBOX  
TV DISPLAY  
CLOSED CAPTION  
COMPONENT  
PROGRESSIVE  
16:9  
PICTURE SETTING  
Select the aspect ratio of the TV to be connected.  
4:3 PANSCAN when you connect a normal TV to the  
DVD player. Displays the wide picture on the whole TV  
screen with a portion automatically cut off.  
4:3 LETTERBOX when you connect a normal TV to  
the DVD player. Displays a wide picture with bands  
displayed on the upper and lower portions of the TV  
screen.  
1
2
Press SETUP to enter the setup menu.  
Press 12to choose the VIDEO SETUP icon  
.
TV TYPE  
Before viewing the DVD or VCD, ensure that the PAL or  
NTSC setting of the system matches your TV set.  
Press 34to highlight “TV TYPE” in the Video Setup  
menu.  
16:9 when you connect a wide-screen TV to the DVD  
player.  
1
2
3
4
5
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight one option.  
Press ENTER/OK.  
Setup the item as follows,  
1
Press 34to highlight the “TV DISPLAY” option in the  
Video Setup menu.  
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
Press 1to return to the Video Setup Page.  
2
3
Note: Choosing “NTSC” item indicates that the player will  
output NTSC signals, Similarly, you can get PAL signals by  
choosing the “PAL” option. The option “MULTI” means  
video output depends on the format of the DVD or VCD  
discs.  
4
5
Press ENTER/OK.  
Press 1to return to the Video Setup Page.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup Menu  
CLOSED CAPTION  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
Closed Captions are data that are hidden in the video  
signal on specific discs, invisible without a special decoder.  
The difference between subtitles and captions is that  
subtitles are intended for hearing persons and captions  
are for the hearing impaired. Subtitles rarely show all of  
the audio. For example, captions show sound effects (e.g.,  
“phone ringing” and “footsteps”), while subtitles don’t.  
Before you select this function, please ensure that the disc  
contains closed captions information and your TV set also  
has this function.  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE  
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION TO  
THE “STANDARD DEFINITION” OUTPUT. IF THERE  
ARE QUESTIONS REGARDING OUR VIDEO  
MONITOR COMPATIBILITY WITH THIS MODEL 525P  
AND 625P DVD PLAYER, PLEASE CONTACT OUR  
CUSTOMER SERVICE CENTER.  
1
Press 34to highlight “CLOSED CAPTION” in the Video  
Setup menu.  
This unit is compatible with the complete line of YAMAHA  
products, including the projectors DPX-1 (525P only),  
DPX-1000, LPX-500 and the plasma monitor PDM-1.  
2
3
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight one option.  
ON: Enable Closed Caption.  
OFF: Disable Closed Caption.  
Press ENTER/OK.  
4
5
PICTURE SETTING  
In this menu, you can personalize your picture color by  
adjusting brightness, contrast, tint and color (saturation).  
Press 1to return to the Video Setup Page.  
PROGRESSIVE  
1
Press 34to highlight “PICTURE SETTING” in the Video  
Setup menu.  
Press 2to open its submenu.  
This player’s COMPONENT video jack can output  
progressive signals to a progressive signal compatible TV  
for an extra high-quality picture.  
Press 34to highlight “PROGRESSIVE”.  
Enter its submenu by pressing 2.  
Move the cursor by pressing 34to highlight one option.  
On: Enable Progressive.  
Off: Disable Progressive.  
2
BRIGHTNESS  
1
2
3
1
2
Press 34to highlight “BRIGHTNESS”.  
Press 2to open the level bar.  
BRIGHTNESS  
-1  
If you select “ON”, the player prompt you to comfirm  
your selection.  
Press ENTER/OK.  
3
4
Press 12to increase and decrease the brightness level.  
Press ENTER/OK.  
4
5
Press 1to return to the Video Setup Page.  
CONTRAST  
1
2
3
4
Press 34to highlight “CONTRAST”.  
Press 2to open the level bar.  
Press 12to increase and decrease the contrast level.  
Press ENTER/OK.  
Notes on activating Progressive:  
Ensure that your TV has progressive scan.  
Connect with YPbPr video cable.  
When the Progressive is active, the VIDEO (CVBS) and  
S VIDEO jacks do not output video signals.  
If there is no picture, wait 15 seconds for auto recover or  
disactivate Progressive manually.  
TINT  
1
2
3
4
Press 34to highlight “TINT”.  
Press 2to open the level bar.  
Press 12to increase and decrease the tint level.  
Press ENTER/OK.  
1
Open the disc tray by pressing /(OPEN/CLOSE)on the  
front panel.  
Press 1.  
2
3
Press MUTE.  
COLOR (saturation)  
1
2
3
4
Press 34to highlight “COLOR”.  
Press 2to open the level bar.  
Press 12to increase and decrease the color level.  
Press ENTER/OK.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup Menu  
PASSWORD SETUP  
Preference Setup menu  
This item is used for the parental control and disc lock.  
Enter your six digit password when a hint is displayed on  
the screen.  
There are options included in this menu such as  
“AUDIO”, “SUBTITLE”, “DISC MENU”, “PARENTAL”,  
“DEFAULT” and “MP3/JPEG NAV”.  
- - PASSWORD SETUP PAGE - -  
PASSWORD  
- - PREFERENCE PAGE - -  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
DEFAULT  
MP3/JPEG NAV  
1
2
3
4
5
Press SETUP to enter the setup menu.  
1
2
3
Press STOP twice.  
Press SETUP to enter the setup menu.  
Press 12to choose the PREFERENCE icon  
Press 12to choose the PASSWORD icon  
Press 4to highlight “PASSWORD”.  
Press 2to highlight “CHANGE”.  
.
.
Press ENTER/OK to open the Password Change Page.  
AUDIO language  
DVD discs are available with multiple audio languages.  
Use this option to select the preferred default audio  
language.  
OLD PASSWORD  
NEW PASSWORD  
CONFIRM PWD  
1
2
3
Press 34to highlight “AUDIO”.  
Enter the submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
option.  
If you want to choose other languages, please refer to  
“If you choose “OTHERS” in AUDIO, SUBTITLE or DISC  
MENU menu”.  
Press ENTER/OK.  
Press 1to return to the Preference Page.  
6
Press 4to repeatedly until the player prompt you to  
enter the old password.  
Enter the current 6 digit code.  
If successful, the player will prompt for a new one.  
After that, enter the new password again to reconfirm.  
7
8
9
4
5
10 Press ENTER/OK to return to the Password Setup Page.  
Note: Your DVD disc may not include the audio language  
which you set in the AUDIO menu. If so, the player will use  
another audio language instead.  
Notes:  
– You can change the setup of parental control and load a  
locked disc with a valid password being entered.  
– If you forget your password, you can enter the default  
password 842100, then you can input your password after  
logging on.  
SUBTITLE language  
DVD discs are available with multi-subtitle languages. Use  
this option to select the preferred default subtitle  
language.  
1
2
3
Press 34to highlight “SUBTITLE”.  
Enter the submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
option.  
If you want to choose other languages, please refer to  
“If you choose “OTHERS” in AUDIO, SUBTITLE or DISC  
MENU menu”.  
4
5
Press ENTER/OK.  
Press 1to return to the Preference Page.  
Note: Your DVD disc may not include the subtitle which you  
set in the SUBTITLE menu. If so, the player will use another  
subtitle language instead.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
DVD  
DISC MENU language  
PARENTAL Control  
DVD discs are available with multiple disc menu  
languages. This option is used to select the default disc  
menu language.  
Press 34to highlight “DISC MENU”.  
Enter the submenu by pressing 2.  
Move the cursor by pressing 34to highlight the selected  
item.  
If you want to choose other languages, please refer to  
“If you choose “OTHERS” in AUDIO, SUBTITLE or DISC  
MENU menu”.  
Movies on DVDs may contain scenes which are not  
suitable for children. Therefore, discs may contain  
‘Parental Control’ information which applies to the  
complete disc or to certain scenes on the disc. These  
scenes are rated from 1 to 8, and alternative, more  
suitable scenes are available on the disc. Ratings are  
country dependent. The ‘Parental Control’ feature allows  
you to prevent discs from being played by your children  
or to have certain discs played with alternative scenes.  
VCD, SVCD, CD have no level indication, so parental  
control function has no effect on those kinds of discs. This  
applies to most illegal DVD discs.  
1
2
3
4
5
Press ENTER/OK.  
Press 1to return to the Preference Page.  
You can follow the steps below to setup the parental  
control:  
Note: If your DVD disc doesn’t include the DISC MENU  
language you have set, the player will use another recorded  
language instead.  
1
2
3
4
Press 34to highlight “PARENTAL”.  
Move to its submenu by pressing 2.  
Then use 34to highlight a rating for the disc inserted.  
Press ENTER/OK to confirm, then press 1to return to  
the Preference Page.  
If you choose “OTHERS” in AUDIO, SUBTITLE  
or DISC MENU menu,  
You can select other languages. Please do as follows,  
Move the cursor by pressing 34to highlight “OTHERS”.  
Press ENTER/OK.  
The DVD player will prompt you to enter a language  
code (Four digits).  
Input a language code by pressing numeric buttons.  
Please look up the preferred language code in the  
chapter LANGUAGE CODE, which can be found at the  
end of this manual.  
1
2
No Parental Control  
Parental Control is not activated. The Disc will be played  
in full.  
1
2
Select 8 ADULT item.  
Press ENTER/OK.  
3
4
Ratings 1 to 7:  
3
Some discs contain scenes which are not suitable for  
children. All scenes with a rating higher than you set will  
be skipped during playback. However if the disc contains  
alternate scenes, these will play automatically. If not, the  
playback will stop and the six digits code will need to be  
entered again.  
Press ENTER/OK.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup Menu  
DEFAULT Setup  
If problems occur while setting up the DVD player, the  
“DEFAULT” function can be used to reset all options to  
the factory defaults and all your personal settings will be  
erased.  
1
2
3
Press 34to highlight “DEFAULT”.  
Highlight RESET by pressing 2.  
Press ENTER/OK.  
Note: When this function is activated, all setups will be reset  
to factory defaults.  
MP3/JPEG NAV  
This menu allows you to select alternate settings when  
you playback JPEG CD and MP3 CD.  
Press 34to highlight MP3/JPEG NAV.  
Press 2to enter the submenu.  
Press 34to highlight WITHOUT MENU or WITH  
MENU.  
1
2
3
WITHOUT MENU: playback all pictures or MP3  
music in sequence automatically.  
WITH MENU: playback pictures or MP3 music in the  
selected folder.  
4
Press ENTER/OK to confirm your selection.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Troubleshooting  
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not  
listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power  
cord, and contact the nearest authorized YAMAHA dealer or service center.  
Problem  
Solution  
No power  
No picture  
– Check if the AC power cord is properly connected.  
– Check if the TV is switched on.  
– Check the video connection.  
– If you did not use Progressive Scan connections (using the Y PB PR jacks on the  
DVD Player) and you do not have a picture at the TV, please follow the steps  
below to turn off Progressive Scan;  
1. Press /(OPEN/CLOSE) to open the disc tray.  
2. Press 1.  
3. Then press MUTE to deactivate the Progressive. The DVD Player will reset  
itself to Component/Interlaced video.  
Distorted picture  
– The disc is badly scratched or dirty.  
– Sometimes a small amount of picture distortion may appear.  
This is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD or  
Video CD  
– Make sure the NTSC/PAL setting at the DVD player matches the video signal  
of your television. (See NTSC/PAL CONVERSION)  
No sound or distorted sound  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
No audio at digital output  
– Check the digital connections.  
– Check if your receiver can decode DTS or MPEG-2 and if not, please make sure  
the digital output is set to PCM.  
– Check if the audio format of the selected audio language matches your receiver  
capabilities.  
Disc can’t be played  
– The DVD+R/DVD+RW/DVD-R/DVD-RW/CD-R/CD-RW must be finalized.  
– Ensure the disc label is facing up.  
– Check if the disc is defective by trying another disc.  
– If you have recorded this particular JPEG CD or MP3 CD yourself, please  
ensure that your disc contains at least about 6~10 pictures or 3~5MP3 music  
tracks before using it with the player.  
No return to start-up screen when  
disc is removed  
– Reset the unit by switching the player off, then on again.  
The player does not respond to the  
remote control  
– Aim the remote control directly at the sensor on the front of the player.  
– Reduce the distance to the player.  
– Replace the batteries in the remote control.  
– Insert the batteries with their polarities (+/– signs) as indicated.  
Buttons do not work  
– In order to completely reset the player, unplug the AC cord from the AC  
outlet.  
Player does not respond to some  
operating commands during  
playback  
– Operations may not be permitted by the disc. Refer to the instructions of the  
disc.  
Cannot record MP3  
– SCMS copy protected discs cannot be recorded digitally. Try recording by  
analog jacks.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
PLAYBACK SYSTEM  
AUDIO PERFORMANCE  
DVD Video  
DA Converter  
24bit  
Video CD & SVCD  
CD  
Signal-Noise (1 kHz)  
Dynamic range (1 kHz) 100dB  
105dB  
PICTURE CD  
CD-R, CD-RW  
DVD+R, DVD+RW  
DVD-R, DVD-RW  
DVD  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
fs 44.1kHz  
fs 44.1kHz  
2Hz- 44kHz  
2Hz- 22kHz  
2Hz- 22kHz  
2Hz- 20kHz  
2Hz- 20kHz  
0.003%  
SVCD  
CD/VCD  
Distortion and Noise (1 kHz)  
VIDEO PERFORMANCE  
Video (CVBS) Output  
S-Video output  
1 Vpp into 75 ohm  
Y: 1 Vpp into 75 ohm  
C: 0.3 Vpp into 75 ohm  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
Number of lines  
Playback  
625  
Multistandard  
525  
(PAL/NTSC)  
Component video output Y: 1 Vpp into 75 ohm  
Pb/Cb Pr/Cr: 0.7 Vpp into  
75 ohm  
CONNECTIONS  
Y Output  
Cinch (green)  
Cinch (blue)  
Cinch (red)  
Mini DIN, 4 pins  
Cinch  
Cinch  
1 coaxial, 1 optical  
IEC958 for CDDA / LPCM/ MPEG1  
IEC1937 for MPEG 2, Dolby Digital and  
AUDIO FORMAT  
Pb/Cb Output  
Pr/Cr Output  
S-Video Output  
Video Output  
Audio Output (L+R)  
Digital Output  
Digital Mpeg/ Dolby Digital / DTS  
Compressed Digital  
PCM  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
24, 32, 56, 64, 96, 128, 256 kbps  
fs, 16, 22.05, 24, 32, 44.1, 48 kHz  
MP3(ISO 9660)  
Analog Sound Stereo  
DTS  
CABINET  
Dimensions (w x d x h) 435 x 315 x 55 mm  
Weight  
Approx. 3.0 Kg  
POWER SUPPLY  
Specifications subject to change without prior notice.  
Power inlet  
Power usage  
Power usage standby  
120V, 60Hz  
Approx. 12W  
< 1W  
Maintenance  
Cleaning the Cabinet  
Use a soft cloth slightly moistened with a mild detergent  
solution. Do not use a solution containing alcohol, spirits,  
ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center out. Do not wipe in a  
circular motion.  
Do not use solvents such as benzine, thinner,  
commercially available cleaners, or antistatic spray  
intended for analog records.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Language Code  
These pages can be used to select other languages.This does not affect the options in “AUDIO”,  
“SUBTITLE” or “DISC MENU”.  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
6665  
6985  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
7889  
7889  
9072  
9065  
6785  
6785  
6786  
7587  
6779  
7282  
6783  
6865  
7876  
6890  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7168  
7176  
7565  
German  
Gikuyu; Kikuyu  
Greek,  
Guarani  
Gujarati  
Hausa  
Hebrew  
Herero  
Hindi  
6869  
7573  
6976  
7178  
7185  
7265  
7269  
7290  
7273  
7279  
7285  
7383  
7379  
7368  
7365  
7369  
7385  
7375  
7165  
7384  
7465  
7486  
7576  
7578  
7583  
7575  
7577  
7573  
8287  
7589  
7586  
7579  
7574  
7585  
7574  
7679  
7665  
7686  
7666  
7673  
7673  
7673  
7678  
7684  
7666  
7775  
7771  
7783  
7776  
7784  
7186  
Arabic  
Armenian  
Assamese  
Avestan  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosnian  
Breton  
Bulgarian  
Burmese  
Castilian, Spanish  
Catalan  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja  
Chichewa; Chewa; Nyanja  
Chinese  
Chuang; Zhuang  
Church Slavic; Slavonic;  
Church Slavonic; Church  
Chuvash  
Cornish  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
Dzongkha  
English  
Esperanto  
Estonian  
Faroese  
Fijian  
Finnish  
French  
Frisian  
Gaelic; Scottish Gaelic  
Gallegan  
Hiri Motu  
Hungarian  
Icelandic  
Ido  
Indonesian  
Interlingua (International)  
Interlingue  
Inuktitut  
Inupiaq  
Irish  
Italian  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Khmer  
Kikuyu; Gikuyu  
Kinyarwanda  
Kirghiz  
Komi  
Korean  
Kuanyama; Kwanyama  
Kurdish  
Kwanyama; Kuanyama  
Lao  
Latin  
Latvian  
Letzeburgesch;  
Limburgan; Limburger;  
Limburger; Limburgan;  
Limburgish; Limburger;  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Manx  
Georgian  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Language Code  
These pages can be used to select other languages.This does not affect the options in “AUDIO”,  
“SUBTITLE” or “DISC MENU”.  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7886  
7868  
7882  
7871  
7869  
8369  
7868  
7879  
7866  
7878  
7889  
7878  
7967  
6785  
6785  
6785  
7982  
7977  
7983  
7983  
8073  
8065  
7065  
8076  
8084  
7967  
8083  
8185  
8277  
8279  
8278  
8285  
8377  
8371  
8365  
8367  
7168  
8382  
8378  
8368  
8373  
8375  
8376  
8379  
Sotho, Southem  
South Ndebele  
Spanish; Castilian  
Sundanese  
Swahili  
8384  
7882  
6983  
8385  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9065  
9085  
Nauru  
Swati  
Navaho, Navajo  
Navajo; Navaho  
Ndebele, North  
Ndebele, South  
Ndonga  
Swedish  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Turkish  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Walloon  
Welsh  
Nepali  
Northern Sami  
North Ndebele  
Norwegian  
Norwegian Bokmål; Bokmål,  
Norwegian Nynorsk;  
Nyanja; Chichewa; Chewa  
Nynorsk, Norwegian;  
Occitan (post 1500); Proven  
Old Bulgarian; Old Slavonic;  
Old Church Slavonic; Old  
Old Slavonic; Church  
Oriya  
Oromo  
Ossetian; Ossetic  
Ossetic; Ossetian  
Pali  
Panjabi  
Persian  
Polish  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zhuang; Chuang  
Zulu  
Portuguese  
Provençal; Occitan (post)  
Pushto  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Russian  
Samoan  
Sango  
Sanskrit  
Sardinian  
Scottish Gaelic; Gaelic  
Serbian  
Shona  
Sindhi  
Sinhalese  
Slovak  
Slovenian  
Somali  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2003  
All rights reserved.  
3139 246 13332  
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.  
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA  
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY  
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE  
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND  
YAMAHA SCANDINAVIA A.B.  
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN  
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA  
YAMAHA  
Printed in China IP  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weed Eater Trimmer 530163363 User Manual
Westinghouse Indoor Furnishings W 128 User Manual
Westinghouse Outdoor Ceiling Fan UL ES RichboroSE WH06 User Manual
Whirlpool Freezer EV110E User Manual
Whirlpool Range W10200947A User Manual
Whirlpool Range WFG381LVS User Manual
Wi Ex Stereo System YX699 User Manual
Zanussi Double Oven ZCE 7550 User Manual
Zanussi Oven 237004 User Manual
Zanussi Ventilation Hood 640033 User Manual