Installation Guide/Installationshandbuch/Manuel d’installation
SPECIAL NOTICES
•
Certain CD-ROMs are copy-protected. Yamaha makes no representations or warranties with regard
to any problems while attempting to copy the CD-ROM(s) or software and cannot be held
responsible for the results of attempts to copy the data.
•
•
The software and this Installation Guide are exclusive copyrights of Yamaha Corporation.
Use of the software and this guide is governed by the SOFTWARE LICENSING AGREEMENT
which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read
carefully the AGREEMENT at the end of this guide before installing the application.)
Copying of the software or reproduction of this guide in whole or in part by any means is expressly
forbidden without the written consent of the manufacturer.
•
•
Yamaha makes no representations or warranties with regard to the use of the software and
documentation and cannot be held responsible for the results of the use of this guide and the
software.
•
•
Copying of the commercially available music data is strictly prohibited except for your personal use.
The company names and product names in this Installation Guide are the trademarks or registered
trademarks of their respective companies.
•
•
Software such as the mLAN driver may be revised and updated without prior notice. Make sure to
check and download the latest version of the software from the following site.
http://www.yamahasynth.com/down/index.htm
Future upgrades of application and system software and any changes in specifications and functions
will be announced separately.
BESONDERE HINWEISE
•
Diese CD-ROM ist geschützt und kann nicht kopiert werden. Yamaha gibt bei Problemen im
Zusammenhang mit dem Versuch, die CD-ROM oder die Software zu kopieren, keine
Zusicherungen oder Gewährleistungen und kann für die Folgen des Kopierens der CD-ROM oder
der Software nicht verantwortlich gemacht werden.
•
•
Dieses Programm und diese Installationsanleitung sind im Sinne des Urheberrechts alleiniges
Eigentum der Yamaha Corporation.
Die Benutzung des Programms und dieser Anleitung unterliegt der SOFTWARE-
LIZENZVEREINBARUNG, mit der sich der Erwerber durch Öffnen des Siegels der
Programmverpackung uneingeschränkt einverstanden erklärt. (Bitte lesen Sie die
VEREINBARUNG am Ende dieser Anleitung vor Installation der Anwendung sorgfältig durch.)
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide/Installationshandbuch/Manuel d’installation
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
For Windows users
• Do not turn on the power to the mLAN devices during installation until the computer displays
the following message.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notices about the CD-ROM
Operating System (OS)
The applications in this CD-ROM are provided in versions for both Windows and Macintosh operating
systems. The installation procedure and the applications themselves differ depending on the operating
system that you are using. Please refer to the appropriate installation instructions.
For Windows, see page 5~25.
CD-ROM Installation Procedure
Before breaking the seal on the software packaging, please read carefully the Software Licensing
Agreement at the end of this guide.
1
2
i88X Users: Register your product.
For subsequent operations, refer to the owner’s
manual for each software program (online help/
PDF manual).
Install the software (Studio Manager, etc.).
3
Install the appropriate driver on your com-
puter, and make the necessary settings.
•
In order to view PDF files, you will need to install Acro-
4
5
i88X Users: Install the Plug-in Effect.
Most of the computer display examples in this
guide are taken from the English version OS/
software.
Start up the software.
Quick solutions/Reference materials
• Setting the sampling frequency ........................................................................... page 19, 33
• Determining the number of mLAN audio channels.............................................. page 19, 33
• Changing the settings of the mLAN Driver........................................................... page 15, 32
• Determining the latency ............................................................................................. page 15
• How can I delete or re-install the driver?........................................................ pages 8, 24, 32
• Connecting multiple mLAN devices..................................................................... page 19, 33
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows Users
CD-ROM Contents
Software for Windows is included on two CD-ROMs (only TOOLS for i88X/mLAN16E is included
with the mLAN 16E,). Install TOOLS for i88X/mLAN16E first.
● TOOLS for i88X/mLAN16E
Folder Name
Application Name
Contents
Enables you to view each PDF manual for the applications.
• Open the online help by pressing the [F1] button on the computer.
Acroread_
Acrobat Reader*1*2
This software includes mLAN drivers and applications required to make
mLAN connections between the mLAN devices and the computer.
Install the software while the power to the mLAN devices is off (page
9). A single installation procedure installs all applications necessary for
mLAN communications. Software to be installed includes mLAN Auto
Connector and mLAN Graphic Patchbay, which are used to set up
audio and MIDI connections for an mLAN network.
mLAN Applications
for YAMAHA
mLAN Tools
mLAN_
● Plug-in Effect (included only with i88X)
• This software can be used as plug-in software within a VST compatible program.
• To call up the PDF manual for each program, select [Start] ➝ [All programs] ➝ [YAMAHA VST
Plugins] ➝ (the relevant software) ➝ [Online Manual].
Folder Name
Application Name
Contents
This software reproduces the EQ and Dynamics effects built into each
channel of the YAMAHA Digital Mixing Studio 01X, and uses the
processing power of the computer for the effects.
You can use the Dynamics and 4-band EQ functions (that can be also
found on Yamaha Digital Mixing consoles) as effects software.You can
also import the 01X settings, thus reproducing the songs created on
the 01X.
01X Channel
Module*1
This program is used to edit the pitch of recorded vocals. More than
just a pitch processor, it can also be used to change the character of
the vocals. Moreover, you can use MIDI data on the host application to
control the Pitch Fix effect. For more information on setting up with the
host application, refer to the Pitch Fix PDF owner’s manual.
Pitch Fix*1
VST_
This is a multi-effect program for processing vocals. The plug-in
features various effects, including a high-pass filter, compressor and a
3-band equalizer.
Vocal Rack*1
Final Master*1
This is a multi-effect program for mastering purposes. It features a
compressor, limiter and soft-clip function, and allows you to split the
signal into three bands for separate multi-band processing.
*1 These applications are supplied with online/PDF manuals.
*2 Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer
user support for them.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
■ About Open Plug-in Technology
You can start mLAN Graphic Patchbay as either stand-alone software or as a plug-in for an Open Plug-
in Technology compatible application.
Open Plug-in Technology (OPT) is a new software format that enables you to control MIDI devices from a
music software sequencer. For example, OPT enables you to start and operate various parts of your music
system, such as Plug-in Board editors and mixing control editors, directly from an OPT-compatible
sequencer. OPT also makes it unnecessary to set MIDI drivers for each application, streamlining your
music production system and making all operations more convenient and seamless.
About OPT Levels
The client application and its compatibility with OPT can be divided into three levels, as shown
below.
Level 1 (OPT Panels) provides basic support for opening and displaying OPT control panels that can transmit
data via a clients’ external MIDI connectors.
Typically, this enables basic hardware editor control panels to operate properly.
Level 2 (OPT Processors) provides support for real-time MIDI processors and panel automation. Typically, this
enables both real-time and offline MIDI effects (e.g., arpeggiators, transposers, etc.) to operate properly and
supply automation to OPT panels.
Level 3 (OPT Views) provides support for edit views and MIDI processors and panels that require direct access to
client sequencer storage structures.
Typically, this enables support of sophisticated MIDI edit views (e.g., list editors, auto accompaniment, data
checkers, etc.).
OPT Level Implementation for the mLAN Graphic Patchbay
This chart shows the OPT-compatibility of mLAN Graphic Patchbay.
mLAN Graphic Patchbay operation
OPT levels of the client application
Operation support
Operation limits
VIEWS (Level 3)
Yes
None
PROCESSORS (Level 2)
PANELS (Level 1)
Yes
None
None
Yes (with limitations)
All mLAN Graphic Patchbay functions work under the client applications of any OPT level (Panels
(Level 1), Processors (Level 2), and Views (Level 3)).
•
Certain operations may not work as expected if there is no corresponding function in the client application (sequencer,
etc.). The highest level of implementation for the client application is indicated in the OPT logo (which appears along with
the version information in the application).
System Requirements for i88X/mLAN16E Software
The system requirements below are necessary for using the included software.
•
•
The system requirements below may differ slightly depending on the particular operating system.
The minimum requirements for included software not listed below may differ. For details, refer to the relevant online
manual or documentation of the software.
•
For details on minimum requirements for each DAW (digital audio workstation) software, refer to the respective owner’s
manual.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended system requirements (Connecting
a single mLAN device to a computer peer-to-peer)
● i88X/mLAN16E (mLAN Tools 2.0/mLAN
Applications for YAMAHA)
These are the total system requirements,
including the audio sequencer, mLAN
software and the plug-in effects.
Fs=44.1kHz/24-bit
Audio Driver 18In/18Out (i88X), 16 In/8
Out (mLAN16E)
MIDI Driver 1In/1Out (i88X), 3 In/3 Out
(mLAN16E)
OS
: Windows XP Professional/XP Home
Edition
16 MIDI and 12 Audio playback tracks
2 Audio recording tracks
Computer : Intel Pentium or Celeron family pro-
cessor, with the S400 (400 Mbps)
IEEE1394 (FireWire) or i.Link termi-
nal (*1).
Hard Disk : Free disk space of 250 MB (i88X)/50
MB (mLAN16E) or more; high-
speed hard disk (*2)
● Recommended system (*3)
• Connecting a single mLAN device to a com-
puter peer-to-peer:
2 Sends for Plug-in Soft Effect
10 Inserts for Plug-in Soft Effect
2 Channels for Plug-in Soft Synthesizer
Latency of 5msec or less
Recommended system requirements (Connecting
a computer and three mLAN devices)
Fs=44.1kHz/24-bit
Audio Driver 32In/32Out (total)
MIDI Driver 4In/5Out (total)
16 MIDI and 8 Audio playback tracks
2 Audio recording tracks
Computer
: 2.2 GHz or higher;
Intel Pentium 4 pro-
cessor
Available Memory : 512 MB or more
2 Sends for Plug-in Soft Effect
10 Inserts for Plug-in Soft Effect
2 Channels for Plug-in Soft Synthesizer
Latency of 5msec or less
• Connecting a computer and three mLAN
devices in an mLAN network:
Computer
: 2.6 GHz or higher;
Intel Pentium 4 pro-
cessor
Minimum system requirements
Fs=44.1kHz/16bit
Available Memory : 512 MB or more
Audio Driver 8In/2Out (i88X), 2In/
2Out(mLAN16E)
● Minimum system requirements (*3)
MIDI Driver 1In/1Out (i88X), 2In/2Out
(mLAN16E)
Computer
: Intel Pentium 1.2 GHz
or Intel Celeron 1.7
GHz (or higher)
16 MIDI and 12 Audio playback tracks
2 Sends for Plug-in Soft Effect
6 Inserts for Plug-in Soft Effect
No Plug-in Soft Synthesizer
Latency of about 50msec
Available Memory : 384 MB or more
*1 The computer must have an IEEE 1394
(FireWire) or i.Link terminal. If there is no ter-
minal, install an IEEE 1394 interface card
(PCI or PC).
For more details on system requirements and
recommended PCI or PC cards, see
•
•
Up to two PCI or PC cards can be used. However,
you can use only one card at a time.
If you are using an IEEE1394 interface built into the
computer, you can use only one IEEE1394 PCI or
PC interface card.
http://www.yamahasynth.com
*2 Acrobat Reader is not included.
*3 The system requirements listed here apply
when using the included software and when
playing audio/MIDI data detailed below on
standard sequencer software. This may differ
depending the particular sequencer software
you are using.
When using a laptop or notebook computer, a built-
in IEEE 1394 terminal may not be available. If this is
the case, install an appropriate PC interface card.
● Plug-in Effect (included only with i88X)
OS
: Windows XP Professional/XP Home Edition/2000/Me/n98SE/98
To use mLAN, turn mLAN on each time you start the computer by using the mLAN icon (mLAN Man-
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
For instructions on how to install the software other than one referred to below, see page 5 in the sec-
tion “CD-ROM Contents.”
Uninstall (removing the installed application)
You can remove the installed application software.Select [START] (➝ [Settings]) ➝ [Control Panel] ➝
[Add/Remove Programs] ➝ [Install/Uninstall], then select the application to be removed and click [Add/
Remove...]. Follow the on-screen instructions to uninstall the application.
•
•
The button names or menus may differ depending on the computer OS.
In order to uninstall the mLAN software, the following two items must be deleted. Delete them in order, 1 then 2.
1. mLAN Applications for YAMAHA
2. mLAN Tools 2.0
Check beforehand the drive name (D:, E:, etc.) corresponding to the CD-ROM you are using. The drive
name is indicated under the CD-ROM icon of [My computer]. (The root directory of the CD-ROM driver
is indicated as D:\, E:\, etc.)
Acrobat Reader
In order to view the electronic (PDF) manuals included with each application, you’ll need to install
Acrobat Reader.
•
If an older version of Acrobat Reader is installed on your PC, you’ll need to uninstall it before proceeding.
1
2
Double-click on the “Acroread_” folder.Four
different language folders will be displayed.
4
Execute the installation by following the on-
screen directions.
After installation is complete, the Acrobat
folder appears on your PC (in Program Files,
as the default).For information on using the
Acrobat Reader, refer to the Reader Guide in
the Help menu.
Select the language you want to use and dou-
ble-click on its folder.The file “arxxx***.exe” file
will be displayed. (“xxx” indicates figures and
“***” indicates the selected language.)
•
File names with the “.exe” extension may have
changed to different names than indicated here.
3
Double-click on “arxxx***.exe.”
Acrobat Reader Setup Dialog box will be dis-
played.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
8
Download from Www.Somanuals.com. All Manuals Search And Download.
mLAN Tools 2.0 and mLAN Applications for YAMAHA
mLAN Tools 2.0 software includes a driver that enables you to connect mLAN devices to a computer.
mLAN Applications for YAMAHA enables audio and MIDI signals to be transferred between a
computer and mLAN devices via mLAN cables.
This software enables you to connect the i88X, mLAN16E, or 01X to a computer via mLAN. 01X users
should uninstall the older version of the mLAN software before installing this software. (Refer to the
01X Installation Guide.)
Follow the steps below to install these software applications.
•
Preparing to install
1
2
Disconnect all MIDI cables that connect MIDI
devices to MIDI IN/OUT connectors on the
mLAN device.
5
Select [Start] ➝ [Control Panel]. If the control
panel appears as shown below, click “Switch
to Classic View” in the upper left of the win-
dow.All control panels and icons will be dis-
played.
Using an IEEE1394 (FireWire/iLink) cable,
connect the mLAN device directly to the com-
puter (without using a hub), and disconnect all
other IEEE 1394-connected devices from the
computer.
3
4
Make sure that the power to the mLAN device
is turned off.
Start the computer and log in to the Adminis-
trator account.
Proceed to the next step.
•
If you are using the S200 data transfer rate stan-
dard (check the rear panel of your particular
device, or refer to the specifications in the owner’s
manual), make sure to uninstall the old version of
mLAN Tools beforehand. For more information on
uninstalling the software, refer to the owner’s
manual for the corresponding device.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Go to [System] ➝ [Hardware] ➝ [Driver Signing] ➝ [File Signature Verification], and check the radio
button to the left of “Ignore -Install all files, regardless of file signature” and click [OK].
•
After completing the installation, make sure to restore the original setting if necessary.
7
Check that no “!” or “x” marks appear next to “IEEE 1394 Bus host controllers” (in [System] ➝ [Hard-
ware] ➝ [Device Manager]). If one of these marks is shown, the mLAN (IEEE 1394/i.Link) connection
cannot be used. Refer to the owner’s manual of your computer for details.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Click [OK] to close the System Properties win-
dow, then click the Close button ([X]) at the
top right of the window to close the Control
Panel.
Installation of mLAN Tools
14
15
Click [Next]. The display for installing mLAN
Tools appears.
Exit from any open applications and close all
open windows.
Click [Next]. The “Destination Directory”
window appears, letting you determine the
desired drive and folder name for installing
mLAN Tools. The destination directory is
automatically set; however, if you wish to
change it, click the [Browse…] button and
select the desired folder (drive:\folder
name). Click [Next] after making or confirm-
ing the selection.
10
Insert the included CD-ROM into the CD-
ROM drive.
Starting up the Installer for the
mLAN Software
The installer will install the following two
programs to your computer.
• mLAN Tools 2.0
•
In general, there is no need to change the desti-
nation directory.
• mLAN Application for YAMAHA
16
Confirm the drive and folder name and click
[Next] to start installation.
•
Use the Cancel button or Close button to quit the
installation. Quitting by using the [CTR]+[ALT]+[DEL]
buttons or by turning off the power while installation is
in process is can result in problems since the installa-
tion is terminated without performing a proper uninstall.
•
To cancel the installation, click [Cancel].
17
When installation is finished, a “Completed”
message appears. Click [Finish].
11
Double-click on the “mLAN_” folder.
Various files are shown, including
“Setup.exe.”
Proceed to the next step.
12
13
Double-click on “Setup.exe.”
A series of confirmation messages appear.
If there are no problems, click [OK] in each
message. When finished, a “Welcome” dis-
play appears.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation of mLAN Applications
forYAMAHA (mLAN Software)
mLAN Driver initial settings
After you restart the computer, complete the
mLAN driver initial settings. Select [ON] in
mLAN Manager to activate the mLAN driver
(page 14).
When the mLAN Tools 2.0 installation is
complete, the computer automatically
displays a window that enables you to start
the installation of Applications for YAMAHA.
Click [Next].
21
A dialog box prompts you to turn on the
power to the mLAN device. Connect the
mLAN device to the computer, then turn on
the power to the i88X and mLAN16E (or
01X).
18
Determine the desired destination drive and
folder name for installation in the “Destina-
tion Directory” window. The destination
directory is automatically set; however, if
you wish to change it, click the [Browse…]
button and select the desired folder
(drive:\folder name).
22
Installing the mLAN device
The “Found New Hardware Wizard” window
is displayed.
Check the radio button next to “Install the
software automatically [Recommended],”
then click [Next].
•
To cancel the installation, click [Cancel].
19Confirm the drive and folder name and click
[Next] to start installation.
•
To cancel the installation, click [Cancel].
20
When the installation process is complete,
a message will prompt you to restart the
computer. Click [Next].
When canceling the installation
If you’ve cancelled an installation before it is
complete, the software may not have been
installed properly. Follow the instructions
below to properly install the software.
23
After you finish installing the connected
mLAN device, click [OK] in the dialog box
that appeared in Step 21.
1
Click on “Add or Remove Programs” in the
Applications for YAMAHA” and “mLAN
Tools 2.0” in the list.
2
3
Delete the two programs in order: first,
“mLAN Applications for YAMAHA,” then
“mLAN Tools 2.0.”
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
12
Download from Www.Somanuals.com. All Manuals Search And Download.
24
The “Make the driver initial settings” dialog
box is displayed. Click [OK].
mLAN MIDI Port initial settings
28
The computer automatically displays the
“Found New Hardware Wizard.” Check the
radio button next to “Install the software
automatically [Recommended],” then click
[Next].
•
During Steps 25 and 26, and Steps 28 and 29,
the computer displays a window indicating that
you are now making the initial settings for each
driver. This window also indicates the number of
times the “Found New Hardware Wizard” will be
displayed during the procedure. Unless you wish
to cancel installation, do not close this window.
Example:
mLAN Network initial settings
29
30
31
When the installation is complete, the com-
puter displays a message of indicating that
installation is complete. Click [Finish].
25
The computer automatically displays the
“Found New Hardware Wizard.” Check the
radio button next to “Install the software
automatically [Recommended],” then click
[Next].
Repeat Steps 28 and 29 until the window
(indicating that you are making the mLAN
Stream driver initial settings) closes.
The computer displays a message indicat-
ing that the initial settings for mLAN driver
are complete. Click [OK].
To use an audio sequencer via mLAN, you
must connect the computer to the mLAN
device using mLAN audio Connector or
26
27
When the installation is complete, the com-
puter displays a message indicating that
installation is complete. Click [Finish].
Repeat Steps 25 and 26 until the window
(indicating that you are making the mLAN
Bus driver initial settings) closes.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirming the installation
•
•
To use mLAN connections, after you start the com-
puter, right-click the mLAN icon (mLAN Manager) in
the Task bar, then select [ON] to activate mLAN con-
nections.
Task bar (mLAN Manager)
If the installation is successful, an mLAN icon
(mLAN Manager) is added to the task bar. To
call up the menu, right-click on the icon.
check whether data is being properly transmitted and
received via mLAN.
When using mLAN, right click on the mLAN
icon (mLAN Manager) in the task bar and
select “ON” (start mLAN).
When starting up the mLAN
The message below appears when mLAN is
being started.
To cancel mLAN startup, click [Cancel] in the
mLAN Start window. To use mLAN, right-click
on the mLAN icon (mLAN Manager) in the task
bar, and select [ON].
ON.................... Enables mLAN operation for
data transfer (Run the “mLAN
Start application”).
OFF.................. Disables mLAN operation
(Run the “mLAN Stop”
Device Manager (Operating System)
application).You can lessen the
CPU load by not using mLAN.
Driver Setup ... Starts mLAN Driver Setup
(page 15).
1
2
Select [Control Panel] from the Start menu.
Double-click on the System icon to call up the
System Properties window.
Auto Connector ....... Starts mLAN Auto
Graphic Patchbay ... Starts mLAN Graphic
Patchbay. For more
3
4
Select the Hardware tab and click [Device
Manager].
Click on the [+] mark next to “Sound, video
and game controllers,” and confirm that
“YAMAHA i88X” or “YAMAHA mLAN16E,” and
“YAMAHA mLanBus” are listed.
information, refer to the
mLAN Graphic Patchbay
Online Manual.
EXIT................ This deletes the mLAN icon
from the task bar, maintaining
the current mLAN ON/OFF
status. To display it again,
select [Start] ➝ [(All)
Programs] ➝ [Startup] ➝
[mLAN Manager].
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing settings after installation
The mLAN-related settings can be changed after installation from the mLAN Driver Setup window.
mLAN Driver Setup
(Right-click the mLAN icon in the task bar ➝ DriverSetup)
This window lets you check and change the mLAN settings for receiving/transmitting data. Make sure
to close any application (DAW, etc.) using the mLAN connection before making changes.
•
To change the wordclock (sample rate) and the number of channels used, right-click on the mLAN icon in the task bar
and start the mLAN Auto Connector and Graphic Patchbay.
q
w
e
t
r
y
q 1394 Adapter Card ID
This indicates the particular ID of the IEEE 1394 (FireWire/iLink) interface card installed to the
computer. When several cards are installed, this is used to select the desired card. Cards not recognized
by the mLAN driver are not displayed.
•
The correct name of the manufacturer or vendor may not be displayed depending on the particular card you are using.
w Latency
Determines the basic latency of the mLAN communications, or how quickly the data is processed after
a command is issued. Choose an option appropriate to your environment.
About latency in an mLAN network
The particular configuration of your computer (processing speed, system memory size, etc.) may affect
its ability to properly record and play back audio data in your audio sequencer, resulting in noise or other
audio problems. In most cases, you can solve the problem by adjusting the latency (delay time).
• A small latency value results in a short delay time and gives optimum response for real-time
recording/playback.
• A large latency value results in a long delay time, but allows for use of more audio channels and
plug-in effects.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
● Types of latency in an mLAN network
Audio latency (msec)
Audio latency is determined by the basic latency (selected in the mLAN Driver Setup window) and Pre-
ferred Buffer Size (specified in the ASIO mLAN Control Panel) (see below).
MIDI latency (msec)
The MIDI latency value varies with the mLAN driver version.
For information on MIDI latency of your mLAN driver version, refer to the file called “MIDI_Latency.txt.”
Windows: Select [Program files | mLAN Tools | YAMAHA | MIDI_Latency.txt].
Macintosh: Locate the installed “mLAN Tools” folder, then double-click the “YAMAHA,” “Manual,” then
“MIDI_Latency.txt” folder.
● ASIO mLAN Control Panel
When you start the ASIO mLAN Control Panel, the system displays the following dialog box.
When using the mLAN ASIO Driver, open the ASIO Control Panel within the driver settings of the DAW
software (the particular menu depends on the software you are using) and set the Preferred Buffer Size
as needed.
•
Also, when using the mLAN WDM driver, adjust as necessary the latency value of the WDM driver (which corre-
sponds to the latency of the ASIO driver in this chart) within the driver settings of the DAW software.
•
The initial setting of the Preferred Buffer Size of the mLAN ASIO driver is the smallest value.
q
w
e
t
r
q Preferred Buffer Size
This parameter enables you to specify the size of the buffer inside the mLAN ASIO driver.
w Sample Size
This parameter enables you to specify the bit resolution for audio data transmission and reception.
e Latency
It indicates the audio latency value for transmission and reception.
Audio latency is determined by the basic latency (selected in the mLAN Driver Setup window) and
Preferred Buffer Size (w).
r OK
Click to enable the settings and close the dialog box.
t Cancel
Click to close the dialog box without changing the settings.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
16
Download from Www.Somanuals.com. All Manuals Search And Download.
e Status
If you are using mLAN Graphic Patchbay, refer
to the Graphic Patchbay Online Manual for
information on the error messages.
If you are using mLAN Auto Connector, this
parameter indicates the current data (MIDI/
Audio) reception status (from the mLAN device
to computer) of the mLAN connection. If there
is an error in transmission, the computer
displays an error message.
Blue ....... Data is being properly transmitted.
Yellow ... Only one type of data (MIDI or
audio) is being received.
Red ........ Error in reception.
Gray....... No reception.
About the Information window
This window indicates the MIDI and audio data reception status (from the mLAN device to computer).
R1, R2, etc.
This indicates the data reception status. “R1” corresponds to
MIDI reception while “R2 corresponds to audio reception from
the mLAN device. The number of tabs shown differs
depending on your particular computer configuration.
Receive Status
This mark indicates the order in which the data of each format is received. The
symbol “o” indicates that data in the corresponding format is being received. The
symbol “-” indicates that data in a different format is being received. For example, the
symbol “oooooooo-” in the “Audio” field indicates that nine sequences have been
received, and the first eight sequences are in the audio data format. The “Unknown”
field displays symbols if sequences in unknown formats are received. These fields
are blank if no mLAN data is received. If an error occurs during reception, a red
warning message flashes. In this case, check the transmission device.
Icon
Blue ........ Reception is normal.
Red......... Error in reception.
Gray........ No reception.
r Set
y EXIT
Clicking this button actually applies the settings
made in this window. Changes to the settings do
not take effect unless [Set] is clicked.
Click to close the dialog box.
t Revert
If you’ve made changes to the settings (but not
yet clicked [Set]), clicking this button restores
the settings made the last time [Set] was clicked.
Once you click [Set], [Revert] cannot be used.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
If the computer’s system sound is output to mLAN audio channels:
The computer’s system sound (such as an alarm sound) will be output to mLAN audio channels if
the following settings are made:
•
•
The WDM driver is selected in mLAN Auto Connector or mLAN Graphic Patchbay.
mLAN WDM driver (mLAN Audio Out/In 01) has been selected for the Windows system audio
device.
Follow the steps below to prevent the system sound from being output to mLAN audio channels.
•
The following setting cancels output of all Wave sounds from the computer speakers.
1
Select [Start] ➝ [Control Panel] ➝ [Sounds and Audio Devices] ➝ [Voice], and click [Volume…] in
the “Voice playback” section to call up the Master Volume window.
2
Check the Mute checkbox in the Wave column.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Computer to an mLAN device via mLAN
•
If you use Auto Connector after you make connections
in mLAN Graphic Patchbay, the connections made in
mLAN Graphic Patchbay will be cancelled.
This section describes the procedure for
connecting a computer to a single mLAN device
peer-to-peer in mLAN Auto Connector.
In mLAN Auto Connector, you can easily
connect an mLAN device by setting up the
wordclock and the number of audio I/O
channels.
•
•
You can also use mLAN Graphic Patchbay to connect
a computer to a single mLAN device peer-to-peer.
The mLAN Auto Connector windows may appear dif-
ferent when certain mLAN devices are connected.
To connect multiple mLAN devices to a
computer, use mLAN Graphic Patchbay. For
more information on mLAN Graphic Patchbay,
refer to the mLAN Graphic Patchbay Online
Manual.
1
2
3
Connect a computer to an mLAN device using
an IEEE1394 cable.
Right-click the YAMAHA mLAN Manager icon
in the Task bar, then select [Auto Connector].
Set up the wordclock and specify the number
of audio channels (see below), then click the
[Connect] button. The computer and mLAN
device are connected via mLAN.
•
Noise may be generated when you connect an mLAN
device in mLAN Auto Connector. Before you make
connections in mLAN Auto Connector, lower the vol-
ume level of the connected device.
Connecting the i88X
e
r
q
w
y
t
u
i
o
!
!
!
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
q Nickname
i [ASIO/WDM] button
This field indicates the nickname of the
connected i88X. To change the nickname, refer
to “Node Information” in the mLAN Graphic
Patchbay Online Manual.
Select the ASIO or WDM driver as appropriate
for your environment.
•
With analog connections, WDM will use the last two of
the selected ASIO channels. The WDM channel sig-
nals will be output from OUTPUT 7 and 8.
w Model Name
This parameter enables you to select an mLAN
device to which you wish to make an mLAN
connection in a multiple mLAN device network.
o PC ← i88X
This parameter enables you to specify the
number of channels for audio data that is input
at the i88X’s INPUT 1-8 jacks (analog),
DIGITAL STEREO COAXIAL or OPTICAL
IN jack (digital), or ADAT IN jack (ADAT) and
output to the computer.
e [Update] button
Clicking this button updates the information on
the mLAN devices connected to the mLAN
network. Use this button when you add an
mLAN device to the network while mLAN Auto
Connector is running.
! [Connect] button
Click this button to connect the i88X to the
computer via mLAN.
r [Identify] button
Clicking this button causes the i88X ACTIVE
indicator to flash for a few seconds.
! [Cancel] button
Click this button to cancel the settings and close
mLAN Auto Connector.
t Sample Rate
This parameter enables you to specify the
sampling frequency (wordclock frequency).
! [Setup] button
Click this button to open the i88X Control Panel
window, which enables you to set the wordclock
transition speed.
y Wordclock Master radio buttons
These buttons enable you to specify the
computer or i88X as the wordclock master.
u PC → i88X
This parameter enables you to specify the
number of channels of audio data routed from
the computer’s audio output (mLAN driver’s
audio output) into the i88X. Signals input in the
i88X are output from the i88X’s OUTPUT 1-8
jacks (analog), DIGITAL STEREO COAXIAL
or OPTICAL OUT jack (digital), or ADAT OUT
jack (ADAT).
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the mLAN16E (MOTIF ES)
e
r
q
w
y
t
u
i
o
!
!
!
q Nickname
t Sample Rate
This field indicates the nickname of the
connected mLAN16E. To change the nickname,
refer to “Node Information” in the mLAN
Graphic Patchbay Online Manual.
This parameter enables you to specify the
sampling frequency (wordclock frequency).
y Wordclock Master radio buttons
These buttons enable you to specify the
computer or mLAN16E as the wordclock
master.
w Model Name
This parameter enables you to select an mLAN
device to which you wish to make an mLAN
connection in a multiple mLAN device network.
When the mLAN16E is connected, select the
name of the device equipped with an
mLAN16E.
u PC → MOTIF ES
This parameter enables you to specify the
number of channels of audio data input into the
mLAN16E from the computer’s audio output
(mLAN driver’s audio output).
e [Update] button
i [ASIO/WDM] button
Select the ASIO or WDM driver as appropriate
for your environment.
Clicking this button updates the information on
the mLAN devices connected to the mLAN
mLAN device to the network while mLAN Auto
•
With the MOTIF ES, WDM will use the last two of the
ASIO channels selected via “mLAN INPUT.” The WDM
channel signals will be routed to the MOTIF ES as
“mLAN IN 7/8CH.”
r [Identify] button
Clicking this button causes the mLAN16E
ACTIVE indicator to flash for a few seconds.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
o PC ← MOTIF ES
Setting the wordclock transition speed
(in the mLAN Control Panel)
This parameter enables you to specify the
number of channels of audio data input into the
computer from the mLAN16E’s output.
When you click the [Setup] button in the
Node Information window in mLAN Auto
Connector or mLAN Graphic Patchbay, the
mLAN Control Panel opens. This panel
enables you to set the wordclock transition
speed.
The Wordclock Transition Speed parameter
enables you to specify how fast the initial
wordclock setting will change to a new
setting if the mLAN device is operating as a
slave in an mLAN network.
•
•
The number of audio transmission channels and MIDI
ports varies on different mLAN16E-compatible
devices.
For more information on audio and MIDI connections
for a MOTIF ES with an mLAN16E installed, refer to
“System Examples” in the mLAN16E Owner’s Manual.
! [Connect] button
Click this button to connect the mLAN16E to
the computer via mLAN.
Slow:
Usually, select this option.
Fast:
! [Cancel] button
Select this option if the wordclock master
device is referencing timecode, such as
MTC, thus changing the wordclock setting.
Click this button to cancel the settings and close
mLAN Auto Connector.
! [Setup] button
Click this button to open the mLAN16E Control
Panel window, which enables you to set the
wordclock transition speed.
4
Click the [Connect] button. When the mLAN16E is connected correctly, mLAN Auto Connector closes
and mLAN communications begin.
•
If connection fails, right-click the mLAN icon in the Task bar, restart mLAN Auto Connector, then click the [Connect]
button again. You do not need to restart the computer.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints when using audio data (Windows)
For optimum use of the audio functions, we recommend you make the following settings. These settings
minimize possible audio problems, such as drop outs, glitches and noise.
•
•
•
•
•
•
•
Set the DMA mode (high-speed transfer mode) of the hard disk to on
To set the DMA mode, select [Control Panel] ➝ [System] (➝ [Hardware]) ➝ [Device Manager],
then change the setting from [Disk drives] or [Hard disk controllers].
Set Processor Scheduling to “Background services”
Select [Control Panel] ➝ [System] ➝ [Advanced] ➝ [Performance] ➝ [Settings] ➝ [Advanced]
and check (enable) “Background services” in the “Processor scheduling” section.
Set the Visual Effects options to “best performance”
Select [Control Panel] ➝ [System] ➝ [Advanced] ➝ [Performance] ➝ [Settings] ➝ [Visual
Effects] and check (enable) “Adjust for best performance.”
Turn Automatic Updates off
Select [Control Panel] ➝ [System] ➝ [Automatic Updates] and un-check (disable) “Keep my
computer up to date.”
Set Remote Assistance to off
Select [Control Panel] ➝ [System] ➝ [Remote] and un-check “Allow Remote Assistance invita-
tions...”
Enable the Classic Start menu
Right click on an empty space in the task bar and select [Properties] ➝ [Start Menu], then check
(enable) “Classic Start menu.”
Disable transition effects
Select [Control Panel] ➝ [Display] (➝ [Appearance]) ➝ [Effects...] button, and un-check (dis-
able) “Use the following transition effect for menus and tooltips.”
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
When the settings of the mLAN Auto Connector or Driver Setup cannot be changed, or
when the program mLAN Applications for YAMAHA/mLAN Tools 2.0 cannot be unin-
stalled.
The message below may sometimes appear when changing the settings with mLAN Auto Connector
and Driver Setup or when uninstalling.
When using the mLAN driver with a program such as an audio sequencer, the settings in mLAN Auto
Connector and Driver Setup cannot be changed, and mLAN Applications forYAMAHA/mLAN Tools 2.0
cannot be uninstalled. Execute these operation only after closing all applications.
There may be times when you are unable to change the settings in mLAN Auto Connector and Driver
Setup and unable to uninstall mLAN Applications forYAMAHA/mLANTools 2.0, even when applications
are not running.This may occur in the following cases.
•
•
The WDM driver is selected in mLAN Auto Connector or mLAN Graphic Patchbay.
When the mLAN WDM driver (“mLAN Audio Out/In 01”) or “mLAN MIDI Out” is selected as the
audio device in Windows.
If this is the case, follow the instructions below before changing the settings in mLAN Auto Connector
and Driver Setup and/or uninstalling mLAN Applications for YAMAHA/mLAN Tools 2.0.
•
In some cases, when you turn on the power to the mLAN devices, Windows may automatically select mLAN Audio/
MIDI.
1
2
3
Select [Start] ➝ [Control Panel] ➝ [Sounds and Audio Devices] ➝ [Voice]. Make sure that something
other than “mLAN Audio Out/In 01” is selected for the “Voice playback” and “Voice recording” set-
tings.
Select [Start] ➝ [Control Panel] ➝ [Sounds and Audio Devices] ➝ [Audio]. Make sure that some-
thing other than “mLAN Audio Out/In 01” is selected for the “Sound playback” and “Sound recording”
settings.
Select [Start] ➝ [Control Panel] ➝ [Sounds and Audio Devices] ➝ [Audio], then select any option
other than the items from “mLAN MIDI OUT” through “mLAN MIDI OUT (8)” for the “MIDI Music Play-
back” setting.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Plug-in Effect (For i88X Users)
1
2
3
Double-click on the “VST_” folder. Various
files including “Setup.exe” will be displayed.
8
Click [Next]. In the window that appears, you
can select the “VstPlugins” folder to which the
plug-in effect will be installed.
Double-click on “Setup.exe.” “Welcome to the
installShield Wizard” window will be displayed.
•
•
In order to be able to use the VST plug-in soft-
ware with the SQ01, it is necessary to check “Pro-
gram Files\YAMAHA\VstPlugins.”
Click [Next]. In the window that appears, enter
the User Name, Company Name, and Serial
Number.
If no folder is shown in the list, click [Add] then
select the folder from the “Browse for Folder” dia-
log box.
•
Serial number is provided in the included Users
Card.
4
Click [Next]. The Registration Confirmation
window will be displayed. Make sure the regis-
tration information you entered is correct, then
click [Yes].
•
If the information is incorrect, click [No] and return
to step 3 above.
5
6
A window for selecting plug-in effects will be
displayed. Select (check) the software you
want to install and click [Next].
9
10
Click [Next]. The installation starts.
A window appears prompting you for confir-
mation of the plug-in effects to be installed.
Make sure the information is correct, then click
[Yes].
When the installation is complete, the mes-
sage“InstallShield Wizard Complete.”
appears. Click [Finish].
•When you wish to change the software to be
installed, click [Return] and go back to step 5.
7
In the window that appears, you can select the
drive and folder to which the owner’s manual
(PDF file) and setup program will be installed.
You should avoid changing the installation
location.
• If you want to change the location, click [Browse...]
then select the installation location (drive and
folder).
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Installed Plug-in
Effect on another host
Uninstall (removing the installed
plug-in effect)
application
1
Select [Start] ➝ [(All) Programs] ➝
[YAMAHA VST Plugins] ➝ [(Plug-in Effect
name)] ➝ [Setup].
Even after you’ve installed the plug-in effect,
if you intend to use it with another VST-
compatible host application, you will need to
manually copy the effect plug-in module to
the “VstPlugins” folder specified by the host
application.
A “Welcome” window appears.
2
3
Select [Remove], then click [Next].
A window appears prompting you for con-
firmation of the file deletion.
1
Select [Start] ➝ [(All) Programs] ➝
[YAMAHA VST Plugins] ➝ [(Plug-in Effect
name)] ➝ [Setup].
Click [OK] to remove the files.
A “Welcome” window appears.
•
To cancel the operation, click [Cancel].
2
3
Select [Modify], then click [Next].
A window appears allowing you to specify
the destination location to which the plug-in
effect is to be copied. Select (check) the
“VstPlugins” folder corresponding to the
host application with which you intend to
use the plug-in effect.
•
Processing speeds of computers equipped with Pen-
tium I processors and some computers equipped with
Pentium IV processors may be reduced significantly if
you use Pitch Fix and Cubase SX2.0.
If this problem occurs, download from the following
URL an updated Pitch Fix Version 1.0.2 or higher:
http://www.yamahasynth.com/down/index.htm
•
•
If you remove the checkmark from the folder
for the installed host-application, you can
remove the installed plug-in effect.
For details, refer to the owner’s manual of
each host application.
4
Click [Next].
The copy operation is executed.
•
To cancel the operation, click [Cancel].
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
26
Download from Www.Somanuals.com. All Manuals Search And Download.
For Macintosh Users
CD-ROM Contents
Software for Macintosh is included on two CD-ROMs (for the mLAN 16E, only TOOLS for i88X/
mLAN16E is included). Install TOOLS for i88X/mLAN16E first.
● TOOLS for i88X/mLAN16E
Folder Name Application Name
Contents
Enables you to view each PDF manual for the applications.
• Open the online help by pressing the [F1] button on the computer.
Acroread_
mLAN_
Acrobat Reader*1*2
This software includes mLAN drivers and applications required to make
mLAN connections between the mLAN devices and the computer.
Install the software while the power to the mLAN devices is off.
• For installation instructions, see page 30.
A single installation procedure installs all applications necessary for
mLAN communications. Software to be installed includes mLAN Auto
Connector and mLAN Graphic Patchbay, which enable you to set up
audio and MIDI connections for an mLAN network.
mLAN Applications
for YAMAHA
mLAN Tools
This software is required to transfer MIDI data (Remote Control and
Studio Manager data) between an mLAN device and a computer.
• For instructions on installing, see page 31.
Open Music System
(OMS) 2.3.8*2
OMS_
OMS Setup for
YAMAHA (folder)
Contains OMS Setup files for an mLAN device (page 36).
● Plug-in Effect (included only with i88X)
• This software can be used as plug-in software within a VST compatible program.
• For instructions on how to use the application, refer to the PDF manual.
(The destination disk you specified)/YAMAHA/Plug-in Effect/(the relevant software folder)
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder Name*3
Application Name
Contents
This software reproduces the EQ and Dynamics effects built
into each channel of the YAMAHA Digital Mixing Studio 01X,
and uses the processing power of the computer for the effects.
You can use the Dynamics and 4-band EQ functions (that can
software.You can also import the 01X settings, thus
01X Channel
Module*1
This program is used to edit the pitch of recorded vocals. More
than just a pitch processor, it can also be used to change the
character of the vocals. Moreover, you can use MIDI data on the
host application to control the Pitch Fix effect. For more
information on setting up with the host application, refer to the
Pitch Fix PDF owner’s manual.
Pitch Fix*1
Mac OS 9
VST_
This is a multi-effect program for processing vocals. The plug-in
features various effects, including a high-pass filter, compressor
and a 3-band equalizer.
Vocal Rack*1
Final Master*1
This is a multi-effect program for mastering purposes. It
features a compressor, limiter and soft-clip function, and allows
you to split the signal into three bands for separate multi-band
processing.
*1 These applications are supplied with online/PDF manuals.
*2 Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer
user support for them.
*3 About Plug-in Effects compatible with Mac OS X
The following plug-in effects, which are compatible with VST and Audio Units, are included in the “Mac
OS X” folder.
• 01X Channel Module
• Pitch Fix
• Vocal Rack
• Final Master
Unfortunately at this time, these software effects cannot be used with the i88X/mLAN16E, since the
i88X/mLAN16E audio /MIDI driver is not yet compatible with Mac OS X.
We are currently working with Apple Computer, Inc. and in the near future, the i88X/mLAN16E will be
compatible with Mac OS X. For the latest information, please see the site below:
http://www.yamahasynth.com
The site also includes instructions on installing the software effects for OS X
With Macintosh notebook computers such as the iBook or PowerBook, before you start up the com-
puter, first connect the mLAN device and mLAN cable, then turn on the power to the mLAN device.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
28
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements for i88X/mLAN16E Software
The system requirements below are necessary for using the included software.
•
•
The system requirements below may differ slightly depending on the particular operating system.
For details on minimum requirements for each DAW (digital audio workstation) software, refer to the respective owner’s
manual.
http://www.yamahasynth.com
*2 Acrobat Reader is not included.
-
● i88X/mLAN16E (including the require
ments for mLAN Tools 2.0/mLAN Appli-
cations for YAMAHA)
*3 The system requirements listed here apply
when using the included software and when
playing audio/MIDI data detailed below on
standard sequencer software. This may differ
depending the particular sequencer software
you are using.
These are the total system requirements,
including the audio sequencer, mLAN Tools
2.0/mLAN Applications for YAMAHA and
the plug-in effects.
Recommended system requirements (Connecting
a single mLAN device to a computer peer-to-peer)
OS
: Mac OS 9.2 (Mac OS X and Mac
Classic environment are not sup-
ported.)
Fs=44.1kHz/24-bit
Audio Driver 18In/18Out (i88X), 16 In/8
Out (mLAN16E)
Computer : System having a built-in S400 (400
Mbps) FireWire terminal. (*1)
Hard Disk : Free disk space of 250 MB (i88X)/50
MB (mLAN16E) or more; high-
MIDI Driver 1In/1Out (i88X), 3 In/3 Out
(mLAN16E)
16 MIDI and 12 Audio playback tracks
2 Audio recording tracks
speed hard disk (*2)
● Recommended system (*3)
• Connecting a single mLAN device to a com-
puter peer-to-peer:
2 Sends for Plug-in Soft Effect
10 Inserts for Plug-in Soft Effect
2 Channels for Plug-in Soft Synthesizer
Latency of 5msec or less
Computer
: G4/G3 signal proces-
sor 900 MHz (or
higher)
Recommended system requirements (Connecting
a computer and three mLAN devices)
Available Memory : 512 MB or more (Vir-
tual memory must be
Fs=44.1kHz/24-bit
Audio Driver 32In/32Out (total)
MIDI Driver 4In/5Out (total)
16 MIDI and 8 Audio playback tracks
2 Audio recording tracks
turned off)
• Connecting three mLAN devices to a com-
puter:
Computer
: G4 1.25GHz Single
processor, 1GHz Dual
processor, or higher
2 Sends for Plug-in Soft Effect
10 Inserts for Plug-in Soft Effect
2 Channels for Plug-in Soft Synthesizer
Latency of 5msec or less
Available Memory : 512 MB or more (Vir-
tual memory must be
turned off)
● Minimum system requirements (*3)
Computer
: G4 dual processor
450 MHz or G4/G3
single processor 700
MHz (or higher)
Minimum system requirements
Fs=44.1kHz/16bit
Audio Driver 8In/2Out (i88X), 2In/
2Out(mLAN16E)
Available Memory : 320 MB or more (Vir-
tual memory must be
MIDI Driver 1In/1Out (i88X), 2In/2Out
(mLAN16E)
turned off)
16 MIDI and 12 Audio playback tracks
2 Sends for Plug-in Soft Effect
6 Inserts for Plug-in Soft Effect
No Plug-in Soft Synthesizer
Latency of about 50msec
*1 The computer must have an IEEE 1394
(FireWire) or i.Link terminal. If there is no ter-
minal, install an IEEE 1394 interface card
(PCI or PC).
For more details on system requirements and
recommended PCI or PC cards, see
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
● Plug-in Effect (included only with i88X)
OS
: Mac OS 8.6 through 9.2
Mac OS X 10.2
•
•
Up to two PCI or PC cards can be used. However,
you can use only one card at a time.
If you are using an IEEE1394 interface built into the
computer, you can use only one IEEE1394 PCI or
PC interface card.
•
When using a PowerBook under battery power,
go Apple menu ➝ [Control Panel] ➝ [Energy
Saver] ➝ [Advanced Settings] (Settings for: Bat-
tery), and remove the check from the “Allow pro-
cessor cycling.”
When using a laptop or notebook computer, a built-
in IEEE 1394 terminal may not be available. If this is
the case, install an appropriate PC interface card.
Software Installation
For instructions on how to install the software other than one referred to below, see page 27 in the
section “CD-ROM Contents.”
Acrobat Reader
3
4
Double-click on the “Reader Installer.”
Acrobat Reader Setup Dialog will be dis-
played.
In order to view the electronic (PDF) manuals
included with each application, you’ll need to
install Acrobat Reader.
Execute the installation by following the direc-
tions appearing on the screen.
After installation is complete, the Acrobat
folder appears on your computer (in Hard
Disk, as the default).
1
2
Double-click on the “Acroread_” folder. Three
different language folders will be displayed:
English, German, French and Japanese.
Select the language you want to use and dou-
ble-click on its folder. “Reader Installer” will be
displayed.
For information on using the Acrobat Reader,
refer to the Reader Guide in the Help menu.
The Installer name may differ depending on
the language you select.
mLAN software and OMS
mLAN Tools 2.0 software includes a driver that enables you to connect mLAN devices to a computer.
mLAN Applications for YAMAHA enables audio and MIDI signals to be transferred between a
computer and mLAN devices via mLAN cables. This software enables you to connect the i88X,
mLAN16E, or 01X to a computer via mLAN.
Follow the steps below to install these software applications.
•
•
For information on the uninstall (removing the installed
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing to install
•
After the installation is complete, you may
encounter an error message warning that the
installer did not close. In this case, go to the “File”
menu and select “Quit” to close the installer. Then
reboot the computer.
1
Start the computer.
•When using the mLAN connection, make sure
to disable any energy saving features on the
computer (such as Suspend, Sleep, Standby
or Pause). When using the virtual memory,
turn it off, then restart the computer.
9
After restarting the Macintosh, you will find the
“Opcode”/“OMS Applications” folder on your
computer (Hard Disk, as the default).
10
Copy the “OMS_2.3_Mac.pdf” in the CD-
ROM to the “OMS Applications” folder
(drag-and-drop it to the folder).
Refer to the “OMS_2.3_Mac.pdf” (English
version only) for information on how to use
the application.
•
If you are using the S200 data transfer rate stan-
dard (check the rear panel of your particular
device, or refer to the specifications in the owner’s
manual), make sure to uninstall the old version of
mLAN Tools beforehand. (Refer to the owner’s
manual of your particular device.)
11
Copy the “OMS Setup for YAMAHA” in the
CD-ROM to the “OMS Applications” folder
(drag-and-drop it to the folder).
In the “OMS Setup for YAMAHA” folder you
will find the OMS Setup files for the i88X
and mLAN16E, which can be used as tem-
plates.
2
3
Exit from any open applications and close all
open windows.
Disconnect all MIDI cables connecting MIDI
devices to the MIDI IN/OUT of the mLAN
device.
4
5
Using an IEEE1394 (FireWire/iLink) cable,
connect the mLAN device directly to the com-
puter (without use of a hub), and disconnect
all other IEEE1394-connected devices from
the computer.
mLAN software
12
Double-click the “YAMAHA mLAN Installer”
icon in the “mLAN_” folder to display the fol-
lowing installation screen. The “Install Loca-
tion” box displays the destination of the
installation. If you wish to change the desti-
nation disk or folder, use the [Switch Disk]
button and the pop-up menu to specify the
desired destination.
Insert the included CD-ROM (“TOOLS for
i88X/mLAN16E”) into the CD-ROM drive.
OMS (Open Music System)
6
Double-click on the “OMS_” folder (English
version only).
“Install OMS 2.3.8” will be displayed.
•
In general, there is no need to change the desti-
nation directory.
7
8
Double-click on “Install OMS 2.3.8.”
OMS Setup Dialog will be displayed.
Execute the installation by following the on-
screen directions.
After the installation, select “Restart.”
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
13
14
Confirm that “Easy install” is selected and
click “Install.” At the confirmation message
that appears, click “Continue.”
The folder you specify
mLAN Tools folder
Opcode/OMS Applications
If a message “OMS Folder cannot be found
in the system folder” or the like appears,
after finishing the installation, copy the file
“mLAN OMS Driver” (located in “Into OMS
Folder” of the “mLAN Tools” folder in the
installation destination) to the system folder
“OMS Folder.”
System folder
Control Panels/mLAN Driver Setup
OMS Folder/mLAN OMS Driver
Preferences/mLAN HALs/01XTransporter.hal
Preferences /mLAN HALs/i88XTransporter.hal
Preferences /mLAN HALs/
mLAN16ETransporter.hal
Preferences /mLAN Prefs/mLAN Control Panel
Prefs
Preferences /mLAN Prefs/oui.tbl
15
16
•
The message prompting to search the
ASIO Drivers folder is shown. Click [OK].
The result of the search will be displayed.
Select the installation destination of the
ASIO mLAN Driver, then click [OK].
* Delete the files and folders listed above when
uninstalling. Be careful not to delete data
already existing before the installation,
including files related to OMS
If a message “ASIO Driver folder cannot be found
in the system folder” or the like appears, after fin-
ishing the installation, copy the file “ASIO mLAN”
(located in “Into ASIO Drivers” of the “mLAN
Tools” folder in the installation destination) to the
“ASIO Drivers” folder of the particular application
you are using.
Changing settings after
installation
The mLAN-related settings can be changed
after installation from the mLAN Driver Setup
window. To display it, start the mLAN Driver
Setup in the Control Panels folder.
17
18
Turn on the mLAN device.
When installation is finished, an “Installation
was successful.” message appears. Click
[Restart].
mLAN Driver Setup
This window lets you check and change the
mLAN settings for receiving/transmitting data.
Make sure to close any application (DAW, etc.)
using the mLAN connection before making
changes. The settings here are the same as that
Confirming the installation
The mLAN Installer places the following files in
the following locations.
Control panel folder of the startup disk
•
•
•
The WDM setting is only for Windows.
The [EXIT] button is only for Windows.
•
check whether data is being properly transmitted and
received via mLAN.
To change the wordclock (sample rate) and the num-
ber of channels used, Start the mLAN Auto Connector
in the mLAN Tools folder.
Extensions folder of the startup disk
mLAN Driver
mLAN Driver Plugs
mLAN Expert
mLAN Family
mLAN Transporter Family
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Computer to an mLAN device via mLAN
•
This section explains how to connect a computer
to a single mLAN device peer-to-peer in mLAN
Auto Connector.
In mLAN Auto Connector, you can easily
connect an mLAN device by setting up the
wordclock and specifying the number of audio
I/O channels.
•
•
You can also use mLAN Graphic Patchbay to connect
a computer to a single mLAN device peer-to-peer.
mLAN Auto Connector windows may appear different
when certain mLAN devices are connected.
To connect multiple mLAN devices to a
computer, use mLAN Graphic Patchbay. For
more information on mLAN Graphic Patchbay,
refer to the mLAN Graphic Patchbay Online
Manual.
1
2
Connect a computer to an mLAN device using
an IEEE1394 cable.
Open the “mLAN Tools” folder, then click the
“mLAN Auto Connector” icon.
mLAN Auto Connector starts.
3
Set up the wordclock and specify the number
of audio channels (see below), then click the
[Connect] button. The computer and mLAN
device are connected via mLAN.
•
Noise may be generated when you connect an mLAN
device in mLAN Auto Connector. Before you make
connections in mLAN Auto Connector, lower the vol-
ume level of the connected device.
Connecting the i88X
q
w
e
r
t
y
u
i
!
!
o
q Nickname
w Model Name
This field indicates the nickname of the
connected i88X. To change the nickname, refer
to “Node Information” in the mLAN Graphic
Patchbay Online Manual.
This parameter enables you to select an mLAN
device to which you wish to make an mLAN
connection in a multiple mLAN device network.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
e [Update] button
i Mac ← i88X
Clicking this button updates the information on
the mLAN devices connected to the mLAN
mLAN device to the network while mLAN Auto
This parameter enables you to specify the
number of channels for audio data that are input
at the i88X’s INPUT 1-8 jacks (analog),
DIGITAL STEREO COAXIAL or OPTICAL
IN jack (digital), or ADAT IN jack (ADAT) and
output to the computer.
r [Identify] button
Clicking this button causes the i88X ACTIVE
indicator to flash for a few seconds.
o [Connect] button
Click this button to connect the i88X to the
computer via mLAN.
t Sample Rate
This parameter enables you to specify the
sampling frequency (wordclock frequency).
! [Cancel] button
Click this button to cancel the settings and close
mLAN Auto Connector.
y Wordclock Master radio buttons
These buttons enable you to specify the
computer or i88X as the wordclock master.
! [Setup] button
Click this button to open the i88X Control Panel
window, which enables you to set the wordclock
transition speed.
u Mac → i88X
This parameter enables you to specify the
number of channels of audio data routed from
the computer’s audio output (mLAN driver’s
audio output) into the i88X. Signals input in the
i88X are output from the i88X’s OUTPUT 1-8
jacks (analog), DIGITAL STEREO COAXIAL
or OPTICAL OUT jack (digital), or ADAT OUT
jack (ADAT).
Connecting the mLAN16E (MOTIF ES)
q
w
e
r
y
t
u
i
!
!
o
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
34
Download from Www.Somanuals.com. All Manuals Search And Download.
•
For more information on audio and MIDI connections
for an MOTIF ES with an mLAN16E installed, refer to
“System Examples” in the mLAN16E Owner’s Manual.
q Nickname
This field indicates the nickname of the
connected mLAN16E. To change the nickname,
refer to “Node Information” in the mLAN
Graphic Patchbay Online Manual.
o [Connect] button
Click this button to connect the mLAN16E to
the computer via mLAN.
w Model Name
This parameter enables you to select an mLAN
device to which you wish to make an mLAN
connection in a multiple mLAN device network.
When the mLAN16E is connected, select the
! [Cancel] button
Click this button to cancel the settings and close
mLAN Auto Connector.
! [Setup] button
Click this button to open the mLAN16E Control
Panel window, which enables you to set the
wordclock transition speed.
e [Update] button
Clicking this button updates the information on
the mLAN devices connected to the mLAN
mLAN device to the network while mLAN Auto
Setting the wordclock transition speed
(mLAN Control Panel)
When you click the [Setup] button in the
Node Information window in mLAN Auto
Connector or mLAN Graphic Patchbay, the
computer displays the mLAN Control Panel,
which enables you to set the wordclock
transition speed.
The Wordclock Transition Speed parameter
enables you to specify how fast the initial
wordclock setting will change to a new
setting if the mLAN device is operating as a
slave in the mLAN network.
r [Identify] button
Clicking this button causes the mLAN16E
ACTIVE indicator to flash for a few seconds.
t Sample Rate
This parameter enables you to specify the
sampling frequency (wordclock frequency).
y Wordclock Master radio buttons
These buttons enable you to specify the
computer or mLAN16E as the wordclock
master.
Slow:
Select this option in most cases.
Fast:
Select this option if the wordclock master
device is referencing timecode, such as
MTC, thus changing the wordclock setting.
u Mac → MOTIF ES
This parameter enables you to specify the
number of channels of audio data input into the
mLAN16E from the computer’s audio output
(mLAN driver’s audio output).
4
Click the [Connect] button. When the mLAN
device is connected correctly, mLAN Auto
Connector closes and mLAN communications
start.
i Mac ← MOTIF ES
This parameter enables you to specify the
number of channels of audio data input into the
computer from the mLAN16E’s output.
•
If connection fails, restart mLAN Auto Connector,
then click the [Connect] button again. You do not
need to restart the computer.
•
The number of audio transmission channels and MIDI
ports varies on different mLAN16E-compatible
devices.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up OMS
•
If you are using mLAN on your Macintosh with an
optionally installed IEEE 1394 (FireWire) interface
card, recreate a new Studio Setup by OMS Setup
included in the installation CD-ROM. For details, refer
to the OMS manual.
1
Double-click on the “OMS” folder and “OMS-
Setup for YAMAHA” folder. The “i88X-mLAN,”
“MOTIF-ES-mLAN” and “mLAN Generic 16
ports” files appear. Copy this to the hard disk
on your computer.
The setting names (device names) of each
MIDI port are as shown below, when the Stu-
dio Setup file is loaded. Select the proper
device (port) for the application you are using.
2
If you are connecting a single i88X or
mLAN16E (including MOTIF ES) using Auto
Connector, double-click “i88X-mLAN” or
“MOTIF ES-mLAN.”
If you are connecting multiple mLAN devices
using Graphic Patchbay or connecting a sin-
gle mLAN16E (excluding MOTIF ES) using
Auto Connector, double-click “mLAN Generic
16 Ports.” The OMS Setup starts.
i88X (Auto Connector) port function
MIDI
Device Name
Function
Port
i88X’s MIDI port (MIDI to
(from) mLAN MIDI
conversion)
1
MIDI
MOTIF ES (Auto Connector) port function
MIDI
Port
3
After starting the OMS Setup, the Studio setup
file double-clicked in step 2 opens.
Device Name
Function
1
2
3
4
TG
Controls a tone generator.
Controls a Plug-in.
PLG
Remote B
Remote A
Controls a DAW or editor.
Controls a DAW or editor.
If “
” is not indicated at the right of the setup
file name, select “Make Current” from the
“File” menu and execute the save operation.
The OMS studio setup has been completed.
You’ll also need to set the OMS port when
using the software.
•
You can assign a function to each MIDI port on the
MOTIF ES. This example uses typical device
names.
Refer to the owner’s manual for your applica-
tion.
Port functions in mLAN Graphic Patchbay and
on the mLAN16E (excluding MOTIF ES)
MID Port Device Name
Function
•
Double clicking the icon of the mLAN device or
executing “MIDI Device Info...” from the “Studio”
menu by selecting the mLAN device, calls up the
Device Info dialog box. We recommend that you
not change the channel assignment since this is
already set by the setup application (mLAN Auto
Connector, etc.) for optimum use with i88X and
mLAN16E. Reset the settings as shown in the
illustration below if you have inadvertently
changed them.
1
Port 1
Port 2
. . . .
Port functions vary
depending on the specific
mLAN device. Refer to the
owner’s manual for your
mLAN device.
2
. . . .
16
Port 16
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
36
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
The port numbers in the “mLAN Generic 16 ports” Stu-
dio Setup correspond to the numbers indicated in the
“Connector Name” column in mLAN Graphic Patch-
bay. For more information on Graphic Patchbay, refer
to the Graphic Patchbay Online Manual.
After the OMS studio setup above has been com-
pleted, your computer will recognize only Yamaha
mLAN (MIDI) devices. If you are connecting other
musical instruments via USB, or if you add an mLAN
(MIDI) device to the network while you are already
using OMS, you should create an original Studio Setup
file. For details, refer to the on-line manual supplied
with OMS.
•
The included OMS studio setup file may not function
even if you follow the above procedure, depending on
your Macintosh/Mac OS version. (MIDI data cannot be
transmitted/received even if the setup becomes avail-
able.) In this situation, connect your Macintosh to the
mLAN device and follow the procedure below to re-
create the setup file.
1
2
Start OMS Setup and select “New Setup” from the
“File” menu.
The “OMS Driver Search” dialog appears.
Remove the check from the “Modem” and
“Printer” check boxes, and click [Search] to exe-
cute the device search. If the Search operation
has been completed successfully, the [mLAN-01]
device is displayed in the OMS driver setting dia-
log.
3
Click the [OK] button to search for ports. If you are
using the i88X or mLAN16E, Port 1, Port 2 ...
appears in the dialog. Mark the appropriate
checkbox of the port and click the [OK] button to
store the setting.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug-in Effect
1
2
3
Double-click on the “Mac OS 9” folder. “VST_”
folder will be displayed.
5
Click [Continue]. In the window that appears,
you can select the “VstPlugins” folder to which
the plug-in effect will be installed.
Double-click on the “VST_” folder. “VST Plu-
gin Installer.” will be displayed.
Double-click on “VST Plugin Installer.”
A window for selecting plug-in effects will be
displayed.
In the window, the “Install Location” box dis-
plays the destination of the owner’s manual
(PDF file). You should avoid changing the
installation location. Select (check) the soft-
ware you want to install.
4
Click [Install]. In the window that appears,
enter the User Name, Company Name, and
Serial Number.
•
•
If there is only one “VstPlugins” folder in your
computer, this step is unnecessary. Go on to step
7.
•
Serial number is provided in the included Users
Card.
If there is no “VstPlugins” folder in your computer,
you can select the location to which the plug-in
effect will be installed, in the window that appears.
6
7
Click [OK]. The installation starts.
When the installation is complete, the follow-
ing screen appears.
8
To finish the installation, click [Quit]. To copy
the module to a location other than selected in
step 5 above, click [Continue] and repeat the
procedure from step 3.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Messages
Messages
Page
Can’t find the i88X (or mLAN16E) on the mLAN network.
tion is correct and secure. After that, restart “mLAN Auto Connector”.
The settings of the mLAN Driver could not be changed.
1) If an application that uses the driver is currently active, close it first, then change
the settings.
2) There is not enough resource memory.
Failed to initialize the mLAN settings because the application “mLAN Start” is not run-
ning.
Select “ON” from the menu of “mLAN Manager” application.
Can’t connect the i88X (or mLAN16E)’s mLAN audio output plug to the computer’s
mLAN audio input plug.
Can’t connect the i88X (or mLAN16E)’s mLAN MIDI output plug to the computer’s
mLAN MIDI input plug.
Can’t connect the computer’s mLAN MIDI output plug to the i88X (or mLAN16E)’s
mLAN MIDI input plug.
Can’t connect the computer’s mLAN wordclock output plug to the i88X (or
mLAN16E)’s mLAN wordclock input plug.
Can’t connect the i88X (or mLAN16E)’s mLAN wordclock output plug to the compu-
ter’s mLAN wordclock input plug.
A new 1394 adaptor card has been found.
If you’ve inserted a new card, restart the computer.
There is not enough resource memory.
Execute mLAN Stop, then execute mLAN Start again. If this fails, restart the computer.
The 1394 adaptor card has not been found.
Check the card and start mLAN again.
One of the programs could not be started. Follow the instructions/messages in the
the computer.
The application is not responding.
Execute mLAN Start again or restart the computer.
Failed to load the mLAN Bus Driver.
cute mLAN Start.
One or more programs could not be closed.
After quitting all DAW programs and any programs using mLAN, execute mLAN Stop.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you encounter a problem...
If you hear no sound or a strange sound, first check the items described below and take appropriate
action. If the problem persists, consult your Yamaha dealer.
■ Unable to communicate via mLAN
• Has the driver been installed? ................................................................................ See page 12.
• Is the mLAN cable properly connected? Check the connection; disconnect the mLAN cable
once, then insert it again.
• (For Windows) Is mLAN set to “ON”? From the task bar, right click on the mLAN Manager icon.
........................................................................................................... See page 14.
• (For Windows) When adding a new IEEE 1394 card, right click on the mLAN Manager icon in the
task bar and select “ON.”. ..................................................................................... See page 14.
• Is the ACTIVE lamp on the rear panel of the mLAN device lit (in blue)? If it is not lit, check the fol-
lowings:
- In mLAN Driver Setup, is the Status indicator blue? If not, restart the mLAN16E-equipped
device and re-enable connection by using mLAN Auto Connector or mLAN Graphic Patch-
bay.
Graphic Patchbay Online Manual.
• Has connection been enabled with mLAN Auto Connector and/or Graphic Patchbay? Re-enable
connection if necessary.
Graphic Patchbay Online Manual.
• Have you changed the device? Even if the model is the same, if the actual device is different, it is
necessary to re-enable connection by using Auto Connector and/or Graphic Patchbay.
Graphic Patchbay Online Manual.
• Is there a loop connection? Check the cabling and make sure none of the devices are connected
in a loop.
Example of loop connection
Computer
Computer
mLAN device
mLAN device
: IEEE1394-equipped device
• There may be a limit on the IEEE 1394 interface of your computer as to the number of ports that
can be used simultaneously. Check how many ports can be used simultaneously.
• Turn off all devices on the mLAN network (except the computer) and re-connect each device
one-by-one until the device causing the problem is found.
• (For Windows) (When removing the mLAN bus from the [Safely Remove Hardware] setting of
the task bar.) Restart the computer when using mLAN again.
• With Macintosh notebook computers such as the iBook and PowerBook, always first connect the
mLAN device and mLAN cable then turn on the power of the mLAN device, before starting up
the computer.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
40
Download from Www.Somanuals.com. All Manuals Search And Download.
• Make sure that you set up the wordclock correctly. Also, make sure that one node is assigned as
master and the other nodes are assigned as slaves.
........... Refer to “mLAN Connection Settings” in the mLAN Graphic Patchbay
Online Manual.
■ The computer processing speed is too slow.
■ The computer’s CPU meter indicates a heavy processing load.
■ Playback response is delayed.
• If multiple S200-compatible devices are connected to the network, connecting mLAN devices in
mLAN Graphic Patchbay may require more time.
■ Inconsistency in wordclock, or unable to exit from Auto Connector
• (For Windows) Mobile computers with Intel CPU
SpeedStep ™ technology is applied for some CPU’s (CPU for notebook PC). Please disable the
SpeedStep ™ technology when mLAN is employed. SpeedStep ™ technology changes CPU
clock dynamically depending on the loading on the CPU to save the power consumption.
- How to disable the SpeedStep™ technology;
In almost all of the PC’s, BIOS has a function to select enabling or disabling the SpeedStep™
technology. Please refer to the PC’s operating manual, or make inquiry to the PC manufac-
turer.
■ Unable to change the mLAN settings
• (For Windows) Is the mLAN (WDM) driver selected as the default audio device for the system?
- Select [Start | Control Panel | Sounds and Audio Devices | Voice].
Make sure that something other than “mLAN Audio 01” is selected for the [Voice playback]
and [Voice recording] settings.
- Select [Start | Control Panel | Sounds and Audio Devices | Audio].
Make sure that something other than “mLAN Audio 01” is selected for the [Sound playback]
and [Sound recording] settings.
- In “MIDI music playback,” select any option other than the range of options from “mLAN
MIDI Out” through “mLAN MIDI Out (8).”
• (For Windows) Select [Start | Control Panel | Sounds and Audio Devices | Sounds]. And select
“No sounds” in the [Sound scheme], then execute again.
• If you cannot quit mLAN (by selecting “OFF” after right clicking the mLAN icon in the task bar),
end the processes listed below manually. ([Ctrl] + [Alt] + [Delete] → [Processes] → select process
→ [End process]) When finished, start mLAN Manager to change the mLAN settings again.
- mLANVDevice.exe
- mLANTFamily.exe
- mLANSoftPH.exe
- mLANManager.exe
• To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager.
• (When a message such as “file cannot be found” appears when uninstalling:)
Try executing the installation once more, then uninstall again.
■ (Windows) mLAN Manager (the mLAN icon in the Task bar) has disap-
peared.
• Select [Start | (All) Programs | Start Up (or mLAN Tools)], then select mLAN Manager.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
■ A connected mLAN device is not recognized.
• Refresh the information by selecting [View], then [Update] in the Menu bar. If the device is still
not recognized, turn mLAN Manager off, then turn it on, then select [Update] to latest informa-
tion.
........... Refer to “Starting mLAN Graphic Patchbay” in the mLAN Graphic Patchbay
Online Manual.
■ Launching mLAN Graphic Patchbay or updating to the latest informa-
tion takes a while.
• When you try to update the network information after connecting or disconnecting an mLAN
device that does not support S400, the system adjusts the mLAN transfer speed, and requires
more time to process your request. However, this will not affect any subsequent operations.
• If five or more mLAN devices (including a computer) have been connected to a network, the
total number of transmission channels of all devices will be limited. You can connect up to 86
channels in Windows and up to 98 channels in a Macintosh system.
•
For information on audio problems such as no sound or excess noise, refer to the Troubleshooting section of the i88X/
mLAN16E Owner’s Manual.
TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Inhalt
Softwareinstallation.................................................................................8
Installieren des Plug-in-Effekts (für i88X-Anwender)............................25
Für Macintosh-Anwender...............................................................27
Inhalt der CD-ROM...............................................................................27
Systemanforderungen für i88X/mLAN16E-Software ............................29
Software-Installation .............................................................................30
Anschließen eines Computers an ein mLAN-Gerät über mLAN...........33
Plug-in-Effekt ........................................................................................38
Displaymeldungen ..........................................................................39
Fehlerbehandlung...........................................................................40
Für Windows-Anwender
• Schalten Sie während der Installation die mLAN-Geräte erst dann aus, nachdem der Computer
die folgende Meldung anzeigt.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Wichtige Hinweise zur CD-ROM
Betriebssystem (OS)
Die Anwendungen auf dieser CD-ROM werden in einer Version für Windows und in einer Version für
das Macintosh-Betriebssystem bereitgestellt. Der Installationsvorgang und die Anwendungen für die
beiden Betriebssysteme sind nicht identisch. Befolgen Sie daher die Installationsanleitung Ihres
Betriebssystems.
Anweisungen zu Windows finden Sie auf Seiten Seite 5–25.
Anweisungen zu Macintosh finden Sie auf Seite Seite 27.
Installation der CD-ROM
Bevor Sie das Siegel der Softwareverpackung öffnen, lesen Sie sich bitte die Software-
Lizenzvereinbarung am Ende dieser Anleitung sorgfältig durch.
1
2
i88X-Anwender: Registrieren Sie Ihr Produkt.
5
Starten Sie die Software.
Informationen zur weiteren Bedienung finden
Sie in der Bedienungsanleitung des jeweiligen
als PDF-Datei).
Installieren Sie die Software (Studio Manager
usw.).
Windows: Seite 6; Macintosh: Seite 30
3
4
Installieren Sie den für Ihren Computer
geeigneten Treiber, und nehmen Sie die
notwendigen Einstellungen vor.
•
Um PDF-Dateien anzeigen zu können, muss Acrobat
Reader auf Ihrem Computer installiert sein (Windows:
Seite 8; Macintosh: Seite 30).
Windows: Seite 9; Macintosh: Seite 30
i88X-Anwender: Installieren Sie den Plug-in-
Effekt.
Windows: Seite 5; Macintosh: Seite 27
Die meisten Beispiele für
Computerbildschirmanzeigen in dieser
Anleitung stammen aus der englischen
Version des Betriebssystems / der Software.
Soforthilfe/Referenzmaterialien
• Einstellen der Sampling-Frequenz ........................................................................Seite 19, 33
• Festlegen der Anzahl der mLAN-Audiokanäle......................................................Seite 19, 33
• Ändern der Einstellungen des mLAN-Treibers......................................................Seite 15, 32
• Festlegen der Latenz...................................................................................................Seite 15
• Wie lässt sich der Treiber entfernen oder neu installieren?.............................Seiten 8, 24, 32
• Anschließen mehrerer mLAN-Geräte ....................................................................Seite 19, 33
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Für Windows-Anwender
Inhalt der CD-ROM
Die Software für Windows befindet sich auf zwei CD-ROMs (lediglich TOOLS for i88X/mLAN16E ist
im Lieferumfang der mLAN16E enthalten). Installieren Sie als Erstes TOOLS for i88X/mLAN16E.
G TOOLS for i88X/mLAN16E
Name der
Anwendung
Ordnername
Inhalt
Dient zum Anzeigen der Programmanleitungen im PDF-Format.
• Drücken Sie die Taste [F1] der Computertastatur, um die Online-Hilfe zu
öffnen.
*1*2
Acroread_
Acrobat Reader
Diese Software enthält mLAN-Treiber und Anwendungen, die zum Herstel-
len der Verbindungen zwischen den mLAN-Geräten und dem Computer
benötigt werden. Installieren Sie die Software, während die mLAN-Geräte
ausgeschaltet sind (Seite 9). Mit einem einzigen Installationsverfahren wer-
den alle für die mLAN-Kommunikation erforderlichen Anwendungen instal-
liert. Zu der zu installierenden Software zählen mLAN Auto Connector und
mLAN Graphic Patchbay, die zur Einrichtung von Audio- und MIDI-Verbin-
dungen für ein mLAN-Netzwerk verwendet werden.
mLAN Applications for
YAMAHA
mLAN Tools
mLAN_
G Plug-in Effect (nur im Lieferumfang der i88X enthalten)
• Diese Software kann innerhalb einesVST-kompatiblen Programms als Plug-in-Anwendung verwendet
werden.
• Um das PDF-Handbuch des jeweiligen Programms aufzurufen, klicken Sie auf [Start] ➝ [Programme]
➝ [YAMAHA VST Plugins] ➝ (Name der gewünschten Software) ➝ [Online Manual].
• Anweisungen zur Installation von Plug-in-Effekten finden Sie auf Seite Seite 25.
Name der
Anwendung
Ordnername
Inhalt
Diese Softwareanwendung reproduziert die in jeden Kanal des Digital
Mixing Studio 01X von Yamaha integrierten EQ- und Dynamikeffekte und
verwendet die Rechenleistung des Computers für die Effekte.
Sie können die Dynamikfunktionen und die Funktionen des 4-Band-Equali-
zers (diese sind auch auf den digitalen Mischpulten vonYamaha zu finden)
als Effekt-Software verwenden. Außerdem können Sie die 01X-Einstellun-
gen importieren und so die am 01X erstellten Songs reproduzieren.
01X Channel
Module
*1
Dieses Programm dient zur Bearbeitung der Tonhöhe von aufgenomme-
nen Gesangssstimmen. Über die Funktion als reiner Tonhöhenprozessor
hinaus kann es verwendet werden, um den Charakter der Gesangsstimme
zu verändern. Außerdem können Sie über MIDI-Daten in der Host-Anwen-
dung den Pitch-Fix-Effekt steuern. Weitere Informationen zum Einrichten
für die Host-Anwendung finden Sie im PDF-Handbuch zu Pitch Fix.
*1
Pitch Fix
VST_
Hierbei handelt es sich um ein Multi-Effekt-Programm zur Verarbeitung von
Gesangsstimmen. Das Plug-in verfügt über mehrere Effekte, einschließlich
Hochpassfilter, Kompressor und 3-Band-Equalizer.
*1
Vocal Rack
Hierbei handelt es sich um ein Multi-Effekt-Programm für Mastering-Zwe-
cke. Es verfügt über einen Kompressor, einen Limiter und eine Soft-Clip-
Funktion und ermöglicht Ihnen die Aufspaltung des Signals in drei Bänder
zur separaten Multi-Band-Verarbeitung.
*1
Final Master
*1 Diese Anwendungen werden mit Online-Hilfedateien/PDF-Anleitungen ausgeliefert.
*2 Leider gibt Yamaha keine Garantie für die Stabilität dieser Programme und kann den Anwendern auch
keine technische Unterstützung dafür anbieten.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Über die Open-Plug-in-Technik
Sie können mLAN Graphic Patchbay entweder eigenständig oder als Plug-in innerhalb eines anderen
Programms verwenden, das mit der Open-Plug-in-Technik kompatibel ist.
Die „Open-Plug-in-Technik“ (OPT) ist ein neues Software-Format, das die Steuerung von MIDI-Geräten
von einem Musik-Software-Sequenzer aus ermöglicht. Sie können zum Beispiel verschiedene Bereiche
Ihres Musiksystems, z. B. Editoren für Plug-in-Erweiterungskarten und Mischpultsteuerung, direkt von
einem OPT-kompatiblen Sequenzer aus starten und fernbedienen. Dadurch ist es nicht mehr erforderlich,
MIDI-Treiber für jedes Programm einzurichten. Ihr Musikproduktionssystem ist einfacher und bequemer
zu bedienen, alles greift nahtlos ineinander.
Über die OPT-Ebenen
Die Client-Anwendung und ihre OPT-Kompatibilität kann in drei Ebenen eingeteilt werden (s.u.).
Level 1 (OPT Panels) bietet eine einfache Unterstützung beim Öffnen und für die Darstellung von OPT-
Bedienfeldern, die Daten über die externen MIDI-Ports des Client übertragen können.
Diese Ebene ermöglicht normalerweise den reibungslosen Betrieb einfacher Bedienfelder von
Hardwareeditoren.
Level 2 (OPT Processors) bietet Unterstützung für Echtzeit-MIDI-Berechnungen und für die
Bedienfeldautomation. Diese Ebene ermöglicht in der Regel die korrekte Funktion von MIDI-Effekten (z.B.
Arpeggiatoren, Transposern usw.) in Echtzeit oder offline sowie die Automatisierung von OPT-Bedienelementen.
Level 3 (OPT Views) bietet Unterstützung für verschiedene Ansichten für Editoren und MIDI-Prozessoren/-
Bedienfelder, die einen direkten Zugriff auf die Speicherstrukturen des Client-Sequenzers benötigen.
In der Regel können auf diese Weise hochentwickelte MIDI-Bearbeitungsansichten (z.B. Listeneditoren,
Begleitautomatik, Datenprüfer usw.) unterstützt werden.
Implementierung der OPT-Ebenen für mLAN Graphic Patchbay
Diese Tabelle zeigt die OPT-Kompabilität von mLAN Graphic Patchbay.
Bedienung von mLAN Graphic Patchbay
OPT Levels der Client-Anwendung
Unterstützung von
Funktionen
Funktionsgrenzen
VIEWS (Ebene 3)
Ja
Keine
Keine
Keine
PROCESSORS (Ebene 2)
PANELS (Ebene 1)
Ja
Ja (mit Einschränkungen)
Sämtliche Funktionen von mLAN Graphic Patchbay arbeiten unter den Client-Anwendungen jeder
beliebigen OPT-Ebene (Panels (Ebene 1), Processors (Ebene 2) und Views (Ebene 3)).
•
Bestimmte Funktionen arbeiten nicht erwartungsgemäß, wenn es in der Client-Anwendung (Sequenzer usw.) keine
entsprechende Funktion gibt. Die höchste Implementierungsebene für die Client-Anwendung ist anhand des OPT-Logos
erkennbar (das in der Anwendung zusammen mit den Versionsinformationen angezeigt wird).
Systemanforderungen für i88X/mLAN16E-Software
Für die Benutzung der mitgelieferten Software gelten die folgenden Systemanforderungen.
•
•
Die nachfolgend angegebenen Systemanforderungen können je nach Betriebsystem geringfügig abweichen.
Die Mindestanforderungen für nicht aufgelistete Softwareanwendungen können abweichen. Einzelheiten finden Sie in
der Online-Hilfe oder Dokumentation zur jeweiligen Software.
•
Einzelheiten zu den Mindestanforderungen für jede DAW-Software (Digital Audio Workstation) finden Sie im
entsprechenden Benutzerhandbuch.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Empfohlene Systemanforderungen (Anschließen
eines einzigen mLAN-Geräts an einen Computer,
wobei beide gleichberechtigt sind)
G i88X/mLAN16E (mLAN Tools 2.0/mLAN
Applications for Yamaha)
Es folgen die gesamten Systemanforderun-
gen, einschließlich Audio-Sequenzer, mLAN-
Software und Plug-in-Effekte.
Frequenz=44,1kHz/24-Bit
Audiotreiber 18 Eingänge/ 18 Ausgänge
(i88X), 16 Eingänge/ 8 Ausgänge
(mLAN16E)
MIDI-Treiber 1 Eingang/1 Ausgang (i88X),
3 Eingänge/3 Ausgänge (mLAN16E)
16 MIDI- und 12 Audio-Wiedergabespuren
2 Audio-Aufnahmespuren
2 Sendekanäle für Software-Plug-in-Effekt
10 Insertion-Kanäle für Software-Plug-in-
Effekt
2 Kanäle für Software-Plug-in-Synthesizer
Latenz von 5ms oder weniger
Betriebs-
system
: Windows XP Professional/XP Home
Edition
Computer : Prozessor der Intel Pentium- oder
Celeron-Familie, mit S400 (400
Mbps), IEEE1394 (FireWire) oder
i.Link-Anschluss (*1).
Festplatte : Mindestens 250 MB (i88X) / 50 MB
(mLAN16E) freier Speicherplatz;
schnelle Festplatte (*2)
G Empfohlenes System (*3)
• Anschließen eines einzigen mLAN-Geräts
an einen Computer, wobei beide
gleichberechtigt sind:
Empfohlene Systemanforderungen (Anschließen
eines Computers und dreier mLAN-Geräte)
Frequenz=44,1kHz/24-Bit
Audiotreiber 32 Eingänge/ 32 Ausgänge
(insgesamt)
MIDI-Treiber 4 Eingänge/5 Ausgänge
(insgesamt)
Computer
: Mindestens 2,2 GHz;
Intel Pentium 4
Prozessor
Verfügbarer
Arbeitsspeicher
: 512 MB oder mehr
16 MIDI- und 8 Audio-Wiedergabespuren
2 Audio-Aufnahmespuren:
2 Sendekanäle für Software-Plug-in-Effekt
10 Insertion-Kanäle für Software-Plug-in-
Effekt
• Anschließen eines Computers und dreier
mLAN-Geräte in einem mLAN-Netzwerk:
Computer
: Mindestens 2,6 GHz;
Intel Pentium 4
Prozessor
2 Kanäle für Software-Plug-in-Synthesizer
Latenz von 5ms oder weniger
Minimale Systemanforderungen
Verfügbarer
Arbeitsspeicher
: 512 MB oder mehr
G Minimale Systemanforderungen (*3)
Frequenz=44,1kHz/16 -Bit
Computer
: Intel Pentium 1,2 GHz
Audiotreiber 8 Eingänge/2 Ausgänge
(i88X), 2 Eingänge/2 Ausgänge
(mLAN16E)
MIDI-Treiber 1 Eingang/1 Ausgang (i88X),
2 Eingänge/2 Ausgänge (mLAN16E)
16 MIDI- und 12 Audio-Wiedergabespuren
2 Sendekanäle für Software-Plug-in-Effekt
6 Insertion-Kanäle für Software-Plug-in-
Effekt
oder Intel Celeron
1,7 GHz (oder höher)
Verfügbarer
Arbeitsspeicher
: 384 MB oder mehr
*1 Der Computer muss über einen IEEE1394-
(FireWire) oder i.Link-Anschluss verfügen.
Wenn kein Anschluss vorhanden ist,
installieren Sie eine IEEE1394-
Schnittstellenkarte (PCI oder PC).
Kein Software-Plug-in-Synthesizer
Latenz von etwa 50 ms
Weitere Einzelheiten zu Systemanforderun-
gen und empfohlenen PCI- oder PC-Karten
finden Sie unter
http://www.yamahasynth.com
*2 Ohne Acrobat Reader.
•
•
Es können bis zu zwei PCI- oder PC-Karten
verwendet werden. Sie können jedoch nur jeweils
eine Karte gleichzeitig benutzen.
Wenn Sie eine im Computer eingebaute IEEE1394-
Schnittstelle verwenden, können Sie nur eine
IEEE1394-PCI- oder PC-Karte benutzen.
Bei Verwendung eines iBooks/Powerbooks ist unter
Umständen kein integrierter IEEE1394-Anschluss
vorhanden. Installieren Sie in diesem Fall eine
geeignete PC-Schnittstellenkarte.
*3 Die hier aufgeführten Systemanforderungen
gelten, wenn die im Lieferumfang enthaltene
Software verwendet wird und die nachfolgend
genannten Audio-/MIDI-Daten mit einer
standardmäßigen Sequenzeranwendung
abgespielt werden. Je nach verwendeter
Sequenzersoftware kann es Abweichungen
geben.
G Plug-in-Effekt (nur im Lieferumfang des i88X enthalten)
Betriebssystem
: Windows XP Professional/XP Home Edition/2000/Me/n98SE/98
Um mLAN zu benutzen, schalten Sie mLAN bei jedem Start des Computers ein, indem Sie das mLAN-
Symbol (mLAN Manager) in der Taskleiste benutzen (Seite 14).
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Softwareinstallation
Anweisungen zur Installation von hier nicht aufgeführten Anwendungen finden Sie auf Seite 5 im
Abschnitt „Inhalt der CD-ROM“.
Deinstallieren (installierte Anwendung entfernen)
Sie können die installierte Anwendungssoftware entfernen. Wählen Sie [START] (¡ [Einstellungen]) ¡
[Systemsteuerung] ¡ [Software] ¡ [Installieren/Deinstallieren], markieren Sie die zu entfernende
Anwendung, und klicken Sie auf [Hinzufügen/Entfernen…]. Folgen Sie den Bildschirmanweisungen zur
Deinstallation der Anwendung.
•
•
Je nach Betriebssystem können die Namen von Schaltflächen oder Menüs anders lauten.
Um die Software mLAN zu deinstallieren, müssen die folgenden beiden Elemente gelöscht werden. Löschen Sie sie
in der Reihenfolge 1 und dann 2.
1. mLAN Applications for YAMAHA
2. mLAN Tools 2.0
Informationen zur Deinstallation des Plug-in-Effekts finden Sie auf Seite 26.
Prüfen Sie vorab den Laufwerksbuchstaben des verwendeten CD-ROM-Laufwerks (D:, E: usw.). Den
Laufwerksbuchstaben finden Sie im Ordner „Arbeitsplatz“ unterhalb des CD-ROM-Symbols. (Das
Stammverzeichnis des CD-ROM-Laufwerks wird beispielsweise mit „D:\“, „E:\“ usw. angegeben.)
Acrobat Reader
Um die elektronischen Anleitungen (im PDF-Format) der einzelnen Anwendungen lesen zu können,
müssen Sie Acrobat Reader installieren.
•
Wenn bereits eine ältere Version von Acrobat Reader auf Ihrem PC installiert ist, müssen Sie diese deinstallieren, bevor
Sie mit der Installation fortfahren.
1
2
Doppelklicken Sie auf den Ordner
„Acroread_“. Daraufhin werden Ordner für vier
verschiedene Sprachen angezeigt.
4
Führen Sie die Installation aus, indem Sie den
Bildschirmanweisungen folgen.
Nach Beendigung der Installation erscheint
befindet sich auf Ihrem PC der Ordner
„Acrobat“ (standardmäßig im Ordner
„Programme“). Informationen zur Verwendung
von Acrobat Reader finden Sie im Reader
Guide im Hilfemenü von Arobat Reader.
Wählen Sie die zu verwendende Sprache aus,
und doppelklicken Sie auf den
entsprechenden Ordner. Die Datei
„arxxx***.exe“ wird angezeigt. („xxx“ gibt die
Versionsnummer und „***“ die ausgewählte
Sprache an.)
•
Dateinamen mit der Erweiterung „.exe“ können
anders benannt sein als hier angegeben.
3
Doppelklicken Sie auf „arxxx***.exe“.
Das Dialogfenster „Acrobat Reader Setup“
wird angezeigt.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
8
Download from Www.Somanuals.com. All Manuals Search And Download.
mLAN Tools 2.0 und mLAN Applications for YAMAHA
Die Software mLAN Tools 2.0 beinhaltet einen Treiber, mit dem Sie mLAN-Geräte an einen Computer
anschließen können.
mLAN Applications for YAMAHA ermöglicht die Übertragung von Audio- und MIDI-Signalen über
mLAN-Kabel zwischen einem Computer und mLAN-Geräten.
Mithilfe dieser Software können Sie das i88X, die mLAN16E oder das 01X über mLAN an einen
Computer anschließen. 01X-Anwender sollten vor der Installation dieser Software die ältere Version
der mLAN-Software deinstallieren. (Informationen hierzu finden Sie im Installationshandbuch für
das 01X.)
Gehen Sie zur Installation dieser Softwareanwendungen wie folgt vor.
•
Erläuterungen der Fehlermeldungen finden Sie auf Seite Seite 39.
Vorbereitungen zur Installation
1
2
Ziehen Sie alle MIDI-Kabel ab, die MIDI-
Geräte mit den Buchsen MIDI IN/OUT des
mLAN-Geräts verbinden.
5
Klicken Sie auf [Start] ➝ [Systemsteuerung].
Falls die Systemsteuerung wie in der
folgenden Abbildung dargestellt wird, klicken
Sie oben links im Fenster auf „Zur klassischen
Ansicht wechseln“, um alle Steuerelemente
und Symbole anzuzeigen.
Verbinden Sie das mLAN-Gerät über ein
IEEE-1394-(FireWire/iLink)-Kabel direkt mit
dem Computer (nicht über einen Hub), und
ziehen Sie alle anderen über IEEE 1394
angeschlossenen Geräte vom Computer ab.
3
4
Vergewissern Sie sich, dass das mLAN-Gerät
eingeschaltet ist.
Starten Sie den Computer, und melden Sie
sich unter dem Administratorenkonto an.
Fahren Sie fort mit dem nächsten Schritt.
•
Wenn Sie die Standard-Datenübertragungsrate
S200 verwenden (überprüfen Sie dies an der
Rückseite des jeweiligen Geräts, oder schlagen
Sie die technischen Daten in der
Bedienungsanleitung nach), müssen Sie zuvor
die alte Version von mLAN Tools deinstallieren.
Weitere Informationen zur Deinstallation der
Software finden Sie in der Bedienungsanleitung
des jeweiligen Geräts.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Klicken Sie auf [System] ➝ [Hardware] ➝ [Treibersignierung] ➝ [Dateisignaturverifizierung], wählen
Sie die Option „Ignorieren – Alle Dateien installieren, unabhängig von der Dateisignatur“ aus, und
klicken Sie auf [OK].
•
Stellen Sie nach Beendigung der Installation ggf. die ursprüngliche Einstellung wieder her.
7
Stellen Sie sicher, dass (unter [System] ➝ [Hardware] ➝ [Geräte-Manager]) neben „IEEE-1394 Bus-
Hostcontroller“ keines der Zeichen „!“ oder „x“ angezeigt wird. Wenn eines dieser Zeichen angezeigt
wird, kann die mLAN-(IEEE 1394/i.Link)-Verbindung nicht genutzt werden. Einzelheiten hierzu finden
Sie in der Bedienungsanleitung Ihres Computers.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Klicken Sie auf [OK], um das Fenster
„Systemeigenschaften„ zu schließen, und
klicken Sie dann oben rechts im Fenster auf
die Schließen-Schaltfläche ([X]), um die
Systemsteuerung zu schließen.
Installation von „mLAN Tools“
14
Klicken Sie auf [Next] (Weiter). Das Fenster
für die Installation von mLAN Tools wird
angezeigt.
Beenden Sie alle laufenden Anwendungen,
und schließen Sie alle geöffneten Fenster.
15
Klicken Sie auf [Next] (Weiter). Daraufhin
wird das Fenster „Destination Directory“
angezeigt, in dem Sie das gewünschte
Laufwerk und Verzeichnis zur Installation
von mLAN Tools festlegen können. Das
Zielverzeichnis wird automatisch
10
Legen Sie die mitgelieferte CD-ROM in das
CD-ROM-Laufwerk ein.
Starten des Installations-
programms für die mLAN-Software
vorgegeben; wenn Sie es ändern möchten,
klicken Sie auf die Schaltfläche [Browse…]
(Durchsuchen), und wählen Sie den
gewünschten Ordner aus
(Laufwerk:\Verzeichnisname). Wählen Sie
das Verzeichnis aus, oder bestätigen Sie
es, und klicken Sie auf [Next] (Weiter).
Das Installationsprogramm installiert die
folgenden beiden Programme auf Ihrem
Computer.
• mLAN Tools 2.0
• mLAN Application for YAMAHA
•
In der Regel besteht keine Veranlassung, das
Zielverzeichnis zu ändern.
•
Klicken Sie auf die Schaltfläche [Abbrechen] oder die
Schließen-Schaltfläche ([X]), um die Installation
abzubrechen. Das Beenden der laufenden Installation
durch Drücken der Tasten [STRG]+[ALT]+[ENTF] oder
durch Ausschalten des Computers kann zu Problemen
führen, da die Installation ohne ordnungsgemäße
Deinstallation beendet wird.
16
Bestätigen Sie das Laufwerk und den
Namen des Verzeichnisses, und klicken Sie
auf [Next] (Weiter), um die Installation zu
starten.
11
Doppelklicken Sie auf den Ordner „mLAN_“.
Daraufhin werden mehrere Dateien
angezeigt, unter anderem „Setup.exe“.
•
Um die Installation abzubrechen, klicken Sie auf
[Cancel] (Abbrechen).
12
13
Doppelklicken Sie auf „Setup.exe“.
17
Nach Beendigung der Installation wird eine
Fertigstellungsmeldung angezeigt. Klicken
Sie auf [Finish] (Fertig stellen).
Es erscheint eine Reihe von Bestätigungs-
aufforderungen. Wenn keine Probleme auf-
treten, klicken Sie in jeder Meldung auf
[OK]. Nach Beendigung der Installation wird
ein Begrüßungsbildschirm angezeigt.
Fahren Sie fort mit dem nächsten Schritt.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation von „mLAN Applications
forYAMAHA“ (mLAN-Software)
Nach Beendigung der Installation von mLAN
Tools 2.0 zeigt der Computer automatisch ein
Fenster an, in dem Sie die Installation von
Applications for YAMAHA starten können.
Klicken Sie auf [Next] (Weiter).
Die Anfangseinstellungen des
mLAN-Treibers
Vervollständigen Sie nach dem Neustart des
Computers die Anfangseinstellungen des
mLAN-Treibers. Wählen Sie in mLAN
Manager die Option [ON] (Ein), um den
mLAN-Treiber zu aktivieren (Seite 14).
21
Ein Dialogfenster fordert Sie dazu auf, das
mLAN-Gerät einzuschalten. Schließen Sie
das mLAN-Gerät an den Computer an, und
schalten Sie dann die i88X und die
18
Legen Sie im Fenster „Destination Direc-
tory“ das gewünschte Laufwerk und Ver-
zeichnis für die Installation fest. Das
Zielverzeichnis wird automatisch vorgege-
ben; wenn Sie es ändern möchten, klicken
Sie auf die Schaltfläche [Browse…] (Durch-
suchen), und wählen Sie den gewünschten
Ordner aus (Laufwerk:\Verzeichnisname).
mLAN16E (oder das 01X) ein.
22
Installation des mLAN-Geräts
Das Assistentenfenster „Neue Hardware
gefunden“ wird angezeigt.
Aktivieren Sie das Optionsfeld neben
„Software automatisch installieren
(empfohlen)“, und klicken Sie auf [Weiter].
•
Um die Installation abzubrechen, klicken Sie
auf [Cancel] (Abbrechen).
19
20
Bestätigen Sie das Laufwerk und den
Namen des Verzeichnisses, und klicken Sie
auf [Next], um die Installation zu starten.
•
Um die Installation abzubrechen, klicken Sie
auf [Cancel] (Abbrechen).
Nach Beendigung des
Installationsprozesses werden Sie durch
eine Meldung aufgefordert, den Computer
neu zu starten. Klicken Sie auf [Next].
Beim Abbrechen der Installation
Wenn Sie eine Installation abbrechen, bevor
sie abgeschlossen ist, wird die Software
möglicherweise nicht ordnungsgemäß
installiert. Folgen Sie den nachstehenden
Schrittanweisungen, um die Software richtig
zu installieren.
23
Klicken Sie, nachdem Sie die Installation
des angeschlossenen mLAN-Geräts
beendet haben, in dem Dialogfenster aus
Schritt 21 auf die Schaltfläche [OK].
1
Klicken Sie in der Systemsteuerung auf
„Software“ (Seite 8), und suchen Sie in der
Liste nach „mLAN Applications for
YAMAHA“ und „mLAN Tools 2.0“.
2
Löschen Sie die beiden Programme in der
folgenden Reihenfolge: zuerst „mLAN
Applications for YAMAHA“, dann „mLAN
Tools 2.0“.
3
Starten Sie die Installation erneut ab Schritt
12 (Seite 11).
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
12
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Das Dialogfenster „Make the driver initial
settings“ (Anfangseinstellungen für den
Treiber vornehmen) erscheint. Klicken Sie
auf [OK].
Anfangseinstellungen des mLAN-
MIDI-Ports
28
Der Computer zeigt automatisch den
Assistenten „Neue Hardware gefunden“ an.
Aktivieren Sie das Optionsfeld neben
„Software automatisch installieren
(empfohlen)“ aus, und klicken Sie auf
[Weiter].
•
Während der Schritte 25 und 26 sowie während
der Schritte 28 und 29 ist auf dem Computer-
bildschirm ein Fenster zu sehen, das anzeigt,
dass Sie gerade die Anfangseinstellungen für den
entsprechenden Treiber vornehmen. Außerdem
zeigt dieses Fenster an, wie oft während dieses
Verfahrens der Assistent „Neue Hardware gefun-
den“ erscheint. Schließen Sie dieses Fenster nur,
wenn Sie die Installation abbrechen möchten.
Beispiel:
Anfangseinstellungen des mLAN-
Netzwerks
29
30
Wenn die Installation abgeschlossen ist,
zeigt der Computer die Meldung an, dass
die Installation abgeschlossen ist. Klicken
Sie auf [Fertig stellen].
25
Der Computer zeigt automatisch den Assis-
tenten „Neue Hardware gefunden“ an. Akti-
vieren Sie das Optionsfeld neben „Software
automatisch installieren (empfohlen)“ aus,
und klicken Sie auf [Weiter].
Wiederholen Sie die Schritte 28 und 29
so lange, bis sich das Fenster (in dem
angezeigt wird, dass Sie gerade die
Anfangseinstellungen für den mLAN-
Stream-Treiber vornehmen) schließt.
31
Der Computer zeigt die Meldung an, dass
die Anfangseinstellungen für den mLAN-
Treiber abgeschlossen sind. Klicken Sie
auf [OK].
Um einen Audio-Sequenzer über mLAN
verwenden zu können, müssen Sie den
Computer mithilfe von mLAN Audio
Connector oder Graphic Patchbay an das
mLAN-Gerät anschließen (Seite 19).
26
27
Wenn die Installation abgeschlossen ist,
zeigt der Computer die Meldung an, dass
die Installation abgeschlossen ist. Klicken
Sie auf [Fertig stellen].
Wiederholen Sie die Schritte 25 und 26 so
lange, bis sich das Fenster (in dem
angezeigt wird, dass Sie gerade die
Anfangseinstellungen für den mLAN-Bus-
Treiber vornehmen) schließt.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Bestätigen der Installation
Taskleiste (mLAN Manager)
•
•
Um mLAN-Verbindungen zu verwenden, klicken Sie
nach dem Starten des Computers mit der rechten
Maustaste auf das mLAN-Symbol (mLAN Manager) in
der Taskleiste, und wählen Sie dann die Option „ON“
(ein), um die mLAN-Verbindungen zu aktivieren.
Wenn die Installation erfolgreich verläuft, wird
der Taskleiste ein mLAN-Symbol (mLAN
Manager) hinzugefügt. Klicken Sie mit der
rechten Maustaste auf das Symbol, um das
Menü aufzurufen.
Im mLAN Driver Setup (Seite 15) können Sie prüfen,
ob die Daten korrekt über mLAN gesendet und
empfangen werden.
Klicken Sie zur Verwendung von mLAN mit
der rechten Maustaste auf das mLAN-
Symbol (mLAN Manager) in der Taskleiste,
und wählen Sie „ON“ (Ein) aus, um mLAN
zu starten.
Beim Starten von mLAN
Wenn mLAN gestartet wird, wird die folgende
Meldung eingeblendet:
Um den mLAN-Startvorgang abzubrechen,
klicken Sie im Fenster „mLAN Start“ auf
[Cancel] (Abbrechen). Klicken Sie zur
Verwendung von mLAN mit der rechten
Manager) in der Taskleiste, und wählen Sie
„ON“ (Ein) aus.
ON ................... Aktiviert den mLAN-Betrieb
zur Datenübertragung (Führt
die Anwendung zum Starten
von mLAN aus).
OFF ................. Deaktiviert den mLAN-Betrieb
zur Datenübertragung (Führt
die Anwendung zum Stoppen
von mLAN aus). Sie können
die Prozessorbelastung
reduzieren, indem Sie mLAN
deaktivieren.
Driver Setup ... Startet mLAN Driver Setup
(Seite 15).
Geräte-Manager (Betriebssystem)
1
2
Klicken Sie im Menü [Start] auf
[Systemsteuerung].
Doppelklicken Sie auf das Symbol „System“,
um das Fenster „Eigenschaften von System“
bzw. „Systemeigenschaften“ zu öffnen.
Auto Connector ........Startet mLAN Auto
Connector (Seite 19).
Graphic Patchbay ....Startet mLAN Graphic
Patchbay. Weitere
3
4
Wechseln Sie zur Registerkarte „Hardware“,
und klicken Sie auf [Geräte-Manager].
Informationen finden Sie
in der Online-Anleitung
von mLAN Graphic
Patchbay.
Klicken Sie auf das Zeichen [+] neben
„Audio-, Video- und Gamecontroller“, und
vergewissern Sie sich, dass „YAMAHA i88X“
bzw. „YAMAHA mLAN16E“ und „YAMAHA
mLanBus“ aufgeführt sind.
EXIT................ Blendet das mLAN-Symbol in
der Taskleiste aus; der aktuelle
mLAN-Ein/Aus-Status bleibt
erhalten. Um es wieder
einzublenden, klicken Sie auf
[Start] ➝ [(Alle) Programme] ➝
[Startup] ➝ [mLAN Manager].
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Ändern von Einstellungen nach der Installation
Im Fenster „mLAN Driver Setup“ (Setup des mLAN-Treibers) können die mLAN-bezogenen
Einstellungen nach der Installation geändert werden.
mLAN Driver Setup (Klicken Sie in der Taskleiste mit der rechten Maustaste auf das mLAN-
Symbol ➝ DriverSetup)
In diesem Fenster können Sie die mLAN-Einstellungen zum Empfangen/Senden von Daten überprüfen
und ändern. Bevor Sie Änderungen vornehmen, müssen Sie alle Anwendungen (DAW usw.) schließen,
die die mLAN-Verbindung verwenden.
•
Um die Wordclock (Sampling-Frequenz) und die Anzahl der verwendeten Kanäle zu ändern, klicken Sie mit der rechten
Maustaste auf das mLAN-Symbol in der Taskleiste, um mLAN Auto Connector und mLAN Graphic Patchbay zu starten.
q
w
e
t
r
y
q1394 Adapter Card ID (ID der 1394-Adapterkarte)
Gibt die ID der auf dem Computer installierten IEEE-1394-(FireWire/iLink)-Schnittstellenkarte an.
Wenn mehrere Karten installiert sind, wird hiermit die gewünschte Karte ausgewählt. Vom mLAN-
Treiber nicht erkannte Karten werden nicht angezeigt.
•
Je nach Karte wird der korrekte Name des Herstellers oder Händlers unter Umständen nicht angezeigt.
wLatenz (Wartezeit)
Legt die grundlegende Wartezeit für mLAN-Kommunikationsvorgänge fest, bzw. wie schnell nach der
Ausgabe eines Befehls die Daten verarbeitet werden. Wählen Sie eine für Ihre Situation geeignete
Einstellung.
Über die Latenz in einem mLAN-Netzwerk
Die Konfiguration eines Computers (Verarbeitungsgeschwindigkeit, Systemspeichergröße usw.) wirkt
sich u.U. auf die Fähigkeit zur korrekten Aufzeichnung und Wiedergabe von Audiodaten im Audio-
Sequenzer aus, was zu Rauschen oder anderen Klangproblemen führen kann. In den meisten Fällen
können Sie das Problem beheben, indem Sie die Latenz (Wartezeit) ändern.
• Ein kleiner Latenzwert führt zu einer kurzen Verzögerungszeit und sorgt für eine optimale
Reaktion bei der Echtzeitaufnahme/-wiedergabe.
• Ein hoher Latenzwert führt zu einer langen Verzögerungszeit, ermöglicht jedoch die Verwendung
von weiteren Audiokanälen und Plug-in-Effekten.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
15
Download from Www.Somanuals.com. All Manuals Search And Download.
G Latenzarten in einem mLAN-Netzwerk
Audiolatenz (ms)
Die Audiolatenz wird festgelegt durch die Grundlatenz (wird im Fenster „mLAN Driver Setup“
ausgewählt) und die bevorzugte Puffergröße (wird im ASIO-mLAN-Kontrollfeld) (siehe unten) festgelegt.
MIDI-Latenz (ms)
Der MIDI-Latenzwert variiert je nach Version des mLAN-Treibers.
Informationen über die MIDI-Latenz der Version Ihres mLAN-Treibers finden Sie in der Datei
„MIDI_Latency.txt“.
Windows: Wählen Sie [Program files | mLAN Tools | YAMAHA | MIDI_Latency.txt].
Macintosh: Gehen Sie zu dem installierten Ordner „mLAN Tools" und doppelklicken Sie auf
„YAMAHA“, „Manual“ und dann auf den Ordner „MIDI_Latency.txt“.
G ASIO mLAN Control Panel (ASIO-mLAN-Kontrollfeld)
Wenn Sie das ASIO-mLAN-Kontrollfeld starten, zeigt das System das folgende Dialogfenster an.
Wenn Sie den mLAN-ASIO-Treiber verwenden, öffnen Sie das ASIO-Kontrollfeld in den
Treibereinstellungen der DAW-Software (der genaue Name des Menüs hängt von der verwendeten
Software ab), und legen Sie die bevorzugte Puffergröße („Preferred Buffer Size“) fest.
•
Ändern Sie bei Verwendung des WDM-Treibers in analoger Weise in den Treibereinstellungen der DAW-Software
den Latenzwert des WDM-Treibers (der der Latenz des ASIO-Treibers in dieser Tabelle entspricht).
Die Ausgangseinstellung der bevorzugten Puffergröße des mLAN-ASIO-Treibers ist der kleinste Wert.
•
q
w
e
t
r
qPreferred Buffer Size (Bevorzugte Puffergröße)
Mit diesem Parameter können Sie die Größe des Puffers innerhalb des mLAN-ASIO-Treibers
festlegen.
wSample Size (Abtastgröße)
Mit diesem Parameter können Sie die Bit-Auflösung für das Senden und Empfangen von Audiodaten
festlegen.
eLatency (Wartezeit)
Dieser Parameter gibt den Audio-Latenzwert für Übertragung und Empfang an.
Die Audiolatenz wird festgelegt durch die Grundlatenz (wird im Fenster „mLAN Driver Setup“
ausgewählt) und die bevorzugte Puffergröße (w) festgelegt.
r OK
Klicken Sie hierhin, um die Einstellungen zu aktivieren und das Dialogfenster zu schließen.
tCancel (Abbrechen)
Klicken Sie hierhin, um das Dialogfenster zu schließen, ohne die Einstellungen zu ändern.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
16
Download from Www.Somanuals.com. All Manuals Search And Download.
eStatus
Wenn Sie mLAN Graphic Patchbay verwenden:
Informationen über die Fehlermeldungen finden
Sie in der Online-Anleitung von Graphic
Patchbay.
Wenn Sie mLAN Auto Connector verwenden,
zeigt dieser Parameter den aktuellen Status des
(MIDI/Audio-)Datenempfangs (vom mLAN-
Gerät zum Computer) der mLAN-Verbindung
an. Falls ein Übertragungsfehler auftritt, zeigt
der Computer eine Fehlermeldung an.
Blau........Daten werden ordnungsgemäß
übertragen.
Gelb........Es wird nur ein Datentyp (MIDI-
oder Audio-Daten) empfangen.
Rot..........Fehler beim Datenempfang.
Grau .......Kein Empfang.
Über das Informationsfenster
Dieses Fenster zeigt den Status des Datenempfangs (vom mLAN-Gerät zum Computer) für MIDI- und
Audio-Daten an.
R1, R2 usw.
Zeigt den Status des Datenempfangs an. „R1“ entspricht dem
MIDI-Empfang, während „R2“ dem Audioempfang vom mLAN-
Gerät entspricht. Die Anzahl der angezeigten Registerkarten
hängt von der Konfiguration des Computers ab.
Receive Status (Empfangsstatus)
Dieses Zeichen gibt die Reihenfolge an, in der die Daten jedes Formats empfangen
werden. Das Symbol „o“ zeigt an, dass Daten im entsprechenden Format empfangen
werden. Das Symbol „-“ zeigt an, dass Daten in einem anderen Format empfangen
werden. Beispielsweise bedeutet die Anzeige „oooooooo-“ im Feld „Audio“, dass neun
Sequenzen empfangen wurden, die ersten acht davon im Audiodatenformat. Im Feld
„Unknown“ (Unbekannt) werden Symbole angezeigt, wenn Sequenzen unbekannten
Formats empfangen werden. Diese Felder sind leer, wenn keine mLAN-Daten
empfangen werden. Wenn während des Empfangs ein Fehler auftritt, blinkt eine rote
Warnmeldung auf. Prüfen Sie in diesem Fall das sendende Gerät.
Symbol
Blau ........ Normaler Empfang.
Rot.......... Fehler beim
Datenempfang.
Grau ....... Kein Empfang.
rSet (Übernehmen)
Schaltfläche klicken, um die Einstellungen
Indem Sie auf diese Schaltfläche klicken,
werden die in diesem Fenster vorgenommenen
Einstellungen übernommen. Änderungen an den
Einstellungen werden erst wirksam, wenn Sie
auf [Set] klicken.
wiederherzustellen, die beim letzten Klicken auf
[Set] festgelegt wurden. Sobald auf [Set]
geklickt wurde, kann [Revert] nicht mehr
verwendet werden.
yEXIT (Beenden)
yRevert (Zurücksetzen)
Klicken Sie hier, um das Dialogfenster zu
schließen.
Wenn Sie Änderungen an den Einstellungen
vorgenommen (aber noch nicht auf [Set]
geklickt) haben, können Sie auf diese
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Wenn das Tonsignal des Computersystems an mLAN-Audiokanäle ausgegeben wird:
Das Tonsignal des Computersystems (wie z.B. Alarmtöne) wird an mLAN-Audiokanäle ausgegeben,
wenn die folgenden Einstellungen vorgenommen wurden:
•
•
In mLAN Auto Connector oder mLAN Graphic Patchbay ist der WDM-Treiber ausgewählt.
Als Systemaudiogerät von Windows ist der mLAN-WDM-Treiber (mLAN Audio Out/In 01)
ausgewählt.
Folgen Sie den nachstehenden Schritten, um zu verhindern, dass das Tonsignal des Computers an die
mLAN-Audiokanäle ausgegeben wird.
•
Die folgende Einstellung hebt die Ausgabe aller Wavesounds über die Computerlautsprecher auf.
1
Wählen Sie [Start] ➝ [Systemsteuerung] ➝ [Sounds und Audiogeräte] ➝ [Voice], und klicken Sie im
Abschnitt „Stimmenwiedergabe“ auf [Lautstärke…], um das Fenster „Master-Lautstärke“ (Master
Volume) aufzurufen.
2
Aktivieren Sie in der Spalte „Wave“ das Kontrollkästchen „Aus“ (Mute).
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Anschließen eines Computers an ein mLAN-Gerät über mLAN
•
Wenn Sie Auto Connector verwenden, nachdem Sie in
mLAN Graphic Patchbay Verbindungen hergestellt
haben, werden die in mLAN Graphic Patchbay
vorgenommenen Verbindungseinstellungen
aufgehoben.
In diesem Abschnitt wird das Verfahren
beschrieben, mit dem Sie in mLAN Auto
Connector einen Computer an ein
gleichberechtigtes, einzelnes mLAN-Gerät
anschließen.
In mLAN Auto Connector können Sie ganz
einfach ein mLAN-Gerät anschließen, indem
Sie die Wordclock und die Anzahl der Kanäle
für die Ein- und Ausgabe von Audiosignalen
einrichten.
•
•
Sie können mLAN Graphic Patchbay auch benutzen,
um einen Computer an ein einzelnes,
gleichberechtigtes mLAN-Gerät anzuschließen.
Das Fenster von mLAN Auto Connector kann
unterschiedlich aussehen, wenn bestimmte mLAN-
Geräte angeschlossen sind.
1
2
Schließen Sie mithilfe eines IEEE-1394-Kabels
einen Computer an ein mLAN-Gerät an.
Um mehrere mLAN-Geräte an einen Computer
anzuschließen, verwenden Sie mLAN Graphic
Patchbay. Weitere Informationen über mLAN
Graphic Patchbay finden Sie in der Online-
Anleitung von mLAN Graphic Patchbay.
Klicken Sie mit der rechten Maustaste auf das
Symbol des mLAN Manager von YAMAHA in
der Taskleiste, und wählen Sie dann [Auto
Connector].
3
Richten Sie die Wordclock ein und legen Sie
die Anzahl der Audiokanäle fest (siehe unten),
und klicken Sie dann auf die Schaltfläche
[Connect] (Verbindung herstellen). Der
Computer und das mLAN-Gerät sind nun über
mLAN verbunden.
•
Beim Anschließen eines mLAN-Geräts in mLAN Auto
Connector können Störgeräusche auftreten.
Verringern Sie den Lautstärkepegel der
angeschlossenen Geräte, bevor Sie in mLAN Auto
Connector Verbindungen herstellen.
Anschließen der i88X
e
r
q
w
y
t
u
i
o
!
!
!
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
19
Download from Www.Somanuals.com. All Manuals Search And Download.
qNickname (Spitzname)
iSchaltfläche [ASIO/WDM]
Wählen Sie je nach Ihrer Umgebung den ASIO-
oder WDM-Treiber aus.
Dieses Feld gibt den unverwechselbaren
Spitznamen des angeschlossenen i88X an.
Einzelheiten dazu, wie Sie den Nickname
ändern können, finden Sie im Abschnitt
„Knoteninformationen“ in der Online-Anleitung
von mLAN Graphic Patchbay.
•
Bei Analogverbindungen verwendet WDM die letzten
beiden der ausgewählten ASIO-Kanäle. Die Signale
der WDM-Kanäle werden über OUTPUT 7 und 8
ausgegeben.
wModel name (Name des Modells)
Mithilfe dieses Parameters können Sie in einem
Netzwerk mit mehreren mLAN-Geräten ein
mLAN-Gerät auswählen, zu dem Sie eine
Verbindung herstellen möchten.
oPC ← i88X
Mithilfe dieses Parameters können Sie die
Anzahl der Kanäle festlegen, über die
Audiodaten zu den Buchsen INPUT 1-8
(analog), DIGITAL STEREO COAXIAL oder
OPTICAL IN (digital) oder ADAT IN (ADAT)
des i88X geführt und an den Computer
ausgegeben werden.
eSchaltfläche [Update] (Aktualisieren)
Wenn Sie auf diese Schaltfläche klicken, werden
die Informationen über die an das mLAN-
Netzwerk angeschlossenen mLAN-Geräte
aktualisiert. Verwenden Sie diese Taste, wenn
Sie zum Netzwerk ein mLAN-Gerät
hinzufügen, während mLAN Auto Connector
läuft.
!Schaltfläche [Connect] (Verbindung
herstellen)
Klicken Sie auf diese Schaltfläche, um die i88X
über mLAN an den Computer anzuschließen.
rSchaltfläche [Identify] (Identifizieren)
Wenn Sie auf diese Schaltfläche klicken, blinkt
die ACTIVE-LED (Aktivanzeige) des i88X ein
paar Sekunden lang.
!Schaltfläche [Cancel] (Abbrechen)
Klicken Sie auf diese Schaltfläche, um die
Einstellungen rückgängig zu machen und
mLAN Auto Connector zu beenden.
tSample Rate (Sampling-Frequenz)
Mithilfe dieses Parameters können Sie die
Sampling-Frequenz (Wordclock-Frequenz)
einstellen.
!Schaltfläche [Setup]
Klicken Sie auf diese Schaltfläche, um das
Fenster „Control Panel“ des i88X zu öffnen, in
dem Sie die Übergangszeit der Wordclock
einstellen können.
yOptionsfelder „Wordclock Master“
(Haupttaktgeber)
Mit diesen Feldern können Sie den Computer
oder das i88X zum Haupttaktgeber machen.
uPC → i88X
Mithilfe dieses Parameters können Sie die
Anzahl der Kanäle festlegen, über die vom
Audioausgang des Computers (dem
Audioausgang des mLAN-Treibers) Audiodaten
zum i88X geführt werden. In die i88X geführte
Signale werden über die Buchsen OUTPUT 1-8
(analog), DIGITAL STEREO COAXIAL oder
OPTICAL OUT (digital) oder ADAT OUT
(ADAT) des i88X ausgegeben.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Anschließen der mLAN16E (MOTIF ES)
e
r
q
w
y
t
u
i
o
!
!
!
qNickname (Spitzname)
tSample Rate (Sampling-Frequenz)
Mithilfe dieses Parameters können Sie die
Sampling-Frequenz (Wordclock-Frequenz)
einstellen.
Dieses Feld gibt den unverwechselbaren
Spitznamen der angeschlossenen mLAN16E an.
Einzelheiten dazu, wie Sie den Nickname
ändern können, finden Sie im Abschnitt
„Knoteninformationen“ in der Online-Anleitung
von mLAN Graphic Patchbay.
yOptionsfelder „Wordclock Master“
(Haupttaktgeber)
Mit diesen Feldern können Sie den Computer
oder die mLAN16E zum Haupttaktgeber
machen.
wModel name (Name des Modells)
Mithilfe dieses Parameters können Sie in einem
Netzwerk mit mehreren mLAN-Geräten ein
mLAN-Gerät auswählen, zu dem Sie eine
Verbindung herstellen möchten.
Wenn die mLAN16E angeschlossen ist, wählen
Sie den Name des mit einer mLAN16E
ausgestatteten Geräts aus.
uPC → MOTIF ES
Mithilfe dieses Parameters können Sie die
Audioausgang des Computers (dem
Audioausgang des mLAN-Treibers) Audiodaten
zur mLAN16E geführt werden.
eSchaltfläche [Update] (Aktualisieren)
Wenn Sie auf diese Schaltfläche klicken, werden
die Informationen über die an das mLAN-Netz-
werk angeschlossenen mLAN-Geräte aktuali-
siert. Verwenden Sie diese Taste, wenn Sie zum
Netzwerk ein mLAN-Gerät hinzufügen, wäh-
rend mLAN Auto Connector läuft.
iSchaltfläche [ASIO/WDM]
Wählen Sie je nach Ihrer Umgebung den ASIO-
oder WDM-Treiber aus.
•
Beim MOTIF ES verwendet WDM die letzten beiden
über „mLAN INPUT“ ausgewählten ASIO-Kanäle. Die
Signale der WDM-Kanäle werden über die Kanäle
„mLAN IN 7/8CH“ zum MOTIF ES geführt.
rSchaltfläche [Identify] (Identifizieren)
Wenn Sie auf diese Schaltfläche klicken, blinkt
die ACTIVE-LED (Aktivanzeige) der
mLAN16E ein paar Sekunden lang.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
21
Download from Www.Somanuals.com. All Manuals Search And Download.
oPC ← MOTIF ES
Die Einstellung „Wordclock Transition
Speed“ (Übergangsgeschwindigkeit der
Wordclock; im mLAN-Kontrollfeld)
Mit diesem Parameter legen Sie die Anzahl der
Kanäle fest, über die Audiosignale vom
Ausgang der mLAN16E zum Computer geführt
werden.
Wenn Sie in mLAN Auto Connector oder
mLAN Graphic Patchbay im Fenster „Node
Information“ auf die Schaltfläche [Setup]
klicken, öffnet sich das mLAN-Kontrollfeld.
Dort können Sie die Übergangsgeschwindig-
keit der Wordclock einstellen.
Mit dem Parameter „Wordclock Transition
Speed“ können Sie festlegen, wie schnell die
ursprüngliche Wordclock-Einstellung zu
einer neuen Einstellung umgeändert wird,
wenn das mLAN-Gerät als Slave
(untergeordnetes Gerät) in einem Netzwerk
fungiert.
•
•
Die Anzahl der Audiosendekanäle und MIDI-Ports
variiert je nach den verschiedenen mLAN16E-
kompatiblen Geräten.
Weitere Informationen über die Audio- und MIDI-
Anschlüsse eines MOTIF ES mit installierter
mLAN16E finden Sie im Abschnitt „Systembeispiele“ in
der Bedienungsanleitung der mLAN16E.
!Schaltfläche [Connect] (Verbindung
herstellen)
Klicken Sie auf diese Schaltfläche, um die
mLAN16E über mLAN an den Computer
anzuschließen.
Slow (Langsam):
Normalerweise sollte diese Option
ausgewählt sein.
Fast (Schnell):
! Schaltfläche [Cancel] (Abbrechen)
Klicken Sie auf diese Schaltfläche, um die
Einstellungen rückgängig zu machen und
mLAN Auto Connector zu beenden.
Wählen Sie diese Option, wenn der
Haupttaktgeber als Synchronisationsbezug
Zeitcode, z. B. MTC, sendet und so die
Einstellung der Wordclock ändert.
!Schaltfläche [Setup]
Klicken Sie auf diese Schaltfläche, um das
Fenster „Control Panel“ der mLAN16E zu
öffnen, in dem Sie die
Übergangsgeschwindigkeit der Wordclock
einstellen können.
4
Klicken Sie auf die Schaltfläche [Connect] (Verbindung herstellen). Wenn die mLAN16E korrekt
angeschlossen ist, wird mLAN Auto Connector beendet, und die mLAN-Kommunikation beginnt.
•
Falls keine Verbindung hergestellt werden kann, klicken Sie mit der rechten Maustaste auf das mLAN-Symbol in
der Taskleiste, starten Sie erneut mLAN Auto Connector, und klicken Sie dann noch einmal auf die Schaltfläche
[Connect]. Es ist nicht erforderlich, den Computer neu zu starten.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Tipps für den Einsatz von Audiodaten (Windows)
Für den optimalen Einsatz der Audiofunktionen empfehlen wir Ihnen die folgenden Einstellungen. Diese
Einstellungen minimieren mögliche Probleme mit Audio wie Aussetzer, Tonhöhenschwankungen und
Rauschen.
•
Schalten Sie den DMA-Modus (High-Speed-Übertragungsmodus) der Festplatte ein
Zur Einstellung des DMA-Modus’ wählen Sie [Systemsteuerung] ➝ [System] (➝ [Hardware]) ➝
[Geräte-Manager], und ändern Sie dann die Einstellung bei [Laufwerke] oder
[Festplattencontroller].
•
Stellen Sie die „Prozessorzeitplanung“ auf „Hintergrunddienste“
Wählen Sie [Systemsteuerung] ➝ [System] ➝ [Erweitert] ➝ [Leistung] ➝ [Einstellungen] ➝
[Erweitert], und markieren (aktivieren) Sie „Hintergrunddienste“ im Bereich
„Prozessorzeitplanung“.
•
•
•
•
•
Stellen Sie die Optionen für Visuelle Effekte auf „Optimale Leistung“ ein
Wählen Sie [Systemsteuerung] ➝ [System] ➝ [Erweitert] ➝ [Leistung] ➝ [Einstellungen] ➝
[Visuelle Effekte], und markieren (aktivieren) Sie „Für optimale Leistung anpassen“.
Schalten Sie „Automatische Updates“ aus
Wählen Sie [Systemsteuerung] ➝ [System] ➝ [Automatische Updates], und löschen
(deaktivieren) Sie die Markierung bei „Diesen Computer auf dem Laufenden halten“.
Schalten Sie die „Remoteunterstützung“ aus
Wählen Sie [Systemsteuerung] ➝ [System] ➝ [Remote], und löschen Sie die Markierung bei
„Ermöglicht das Senden von…“
Schalten Sie das „Klassische Startmenü“ ein
Nach einem Rechtsklick auf eine freie Stelle in der Taskleiste können Sie [Eigenschaften] ➝
[Startmenü] auswählen, und dort das „Klassische Startmenü“ markieren (aktivieren).
Übergangseffekte ausschalten
Wählen Sie [Systemsteuerung] ➝ [Anzeige] (➝ [Darstellung]) ➝ [Effekte…], und löschen
(deaktivieren) Sie die Markierung bei „Übergangseffekte für Menüs und Quickinfo verwenden“.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Wenn die Einstellungen im Fenster „mLAN Auto Connector“ oder „mLAN Driver Setup“
nicht geändert werden können, oder wenn das Programm „mLAN Applications for
YAMAHA“/„mLAN Tools 2.0“ nicht deinstalliert werden kann.
Beim Ändern der Einstellungen in den Fenstern „mLAN Auto Connector“ und „mLAN Driver Setup“ oder
beim Deinstallieren wird u.U. die folgende Meldung angezeigt.
Wenn Sie den mLAN-Treiber mit einem Programm wie einem Audio-Sequenzer verwenden, können die
Einstellungen in den Fenstern „mLAN Auto Connector“ und „mLAN Driver Setup“ nicht geändert
werden, und die Programme „mLAN Applications forYAMAHA“/„mLAN Tools 2.0“ lassen sich nicht
deinstallieren. Führen Sie diesen Vorgang aus, nachdem Sie zuvor alle Anwendungen geschlossen
haben.
Es gibt Zustände, in denen Sie die Einstellungen in „mLAN Auto Connector“ und „mLAN Driver Setup“
nicht ändern und „mLAN Applications forYAMAHA“/„mLAN Tools 2.0“ nicht deinstallieren können,
auch wenn gerade keine Anwendungen laufen. Dies ist in den folgenden Fällen möglich.
•
•
In mLAN Auto Connector oder mLAN Graphic Patchbay ist der WDM-Treiber ausgewählt.
Wenn der mLAN-WDM-Treiber („mLAN Audio Out/In 01“) oder „mLAN MIDI Out“ als
Audiogerät in Windows ausgewählt ist.
Folgen Sie in diesem Fall den nachstehenden Anweisungen, bevor Sie die Einstellungen in den
Fenstern „mLAN Auto Connector“ und „mLAN Driver Setup“ ändern und/oder „mLAN Applications for
YAMAHA“/„mLAN Tools 2.0“ deinstallieren.
•
In einigen Fällen kann es vorkommen, dass Windows, wenn Sie die mLAN-Geräte einschalten, automatisch mLAN
Audio/MIDI auswählt.
1
2
3
Wählen Sie [Start] ➝ [Systemsteuerung] ➝ [Sounds und Audiogeräte] ➝ [Voice]. Vergewissern Sie
sich, dass unter „Stimmenwiedergabe“ und „Stimmenaufnahme“ nicht „mLAN Audio Out/In 01“
ausgewählt ist.
Wählen Sie [Start] ➝ [Systemsteuerung] ➝ [Sounds und Audiogeräte] ➝ [Audio]. Vergewissern Sie
sich, dass unter „Soundwiedergabe“ und „Soundaufnahme“ nicht „mLAN Audio Out/In 01“
ausgewählt ist.
Wählen Sie [Start] ➝ [Systemsteuerung] ➝ [Sounds und Audiogeräte] ➝ [Audio], und wählen Sie
dann in der Einstellung „MIDI-Musikwiedergabe“ eine andere Option als die Einträge von „mLAN
MIDI OUT“ bis „mLAN MIDI OUT (8)“.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installieren des Plug-in-Effekts (für i88X-Anwender)
1
2
Doppelklicken Sie auf den Ordner „VST_“.
Daraufhin werden mehrere Dateien angezeigt,
unter anderem „Setup.exe“.
8
Klicken Sie auf [Next] (Weiter). In dem
angezeigten Fenster können Sie den Ordner
„VstPlugins“ auswählen, in dem der Plug-in-
Effekt installiert werden soll.
Doppelklicken Sie auf „Setup.exe“. Das
Begrüßungsfenster für die Installation
„Welcome to the installShield Wizard“ wird
angezeigt.
•
•
Um die Plug-in-Software VST mit SQ01
verwenden zu können, müssen Sie
„Programme\YAMAHA\VstPlugins“ aktivieren.
3
Klicken Sie auf [Next] (Weiter). Geben Sie in
dem daraufhin angezeigten Fenster den
Benutzernamen, den Firmennamen und die
Seriennummer ein.
Falls in der Liste kein Verzeichnis angezeigt ist,
klicken Sie auf [Add] (Hinzufügen), und wählen
Sie im Dialogfeld „Browse for Folder“ (Nach
Verzeichnis suchen) das gewünschte
Verzeichnis aus.
•
Die Seriennummer finden Sie auf der
mitgelieferten Benutzerkarte.
4
Klicken Sie auf [Next] (Weiter). Das Fenster
zur Registrierungsbestätigung wird angezeigt.
Vergewissern Sie sich, dass die
eingegebenen Registrierungsangaben richtig
sind, und klicken Sie auf [Yes] (Ja).
•
Falls die Angaben falsch sind, klicken Sie auf [No]
(Nein), und gehen Sie zu Schritt 3 (s.o.) zurück.
5
6
Ein Fenster zur Auswahl von Plug-in-Effekten
wird angezeigt. Wählen Sie die zu
installierende Software aus, und klicken Sie
auf [Next] (Weiter).
9
Klicken Sie auf [Next] (Weiter). Die Installation
wird gestartet.
Ein Fenster wird angezeigt, in dem Sie zur
Bestätigung der zu installierenden Plug-in-
Effekte aufgefordert werden. Vergewissern
Sie sich, dass die Angaben richtig sind, und
klicken Sie auf [Yes] (Ja).
10
Wenn die Installation abgeschlossen ist,
erscheint die Meldung „InstallShield Wizard
Complete“ (InstallShield Wizard
abgeschlossen). Klicken Sie auf [Finish]
(Fertig stellen).
•
Um die zu installierende Software zu ändern,
klicken Sie auf [Return] (Zurück), und kehren Sie
zu Schritt 5 zurück.
7
In dem daraufhin angezeigten Fenster können
Sie das Laufwerk und Verzeichnis für die
Installation von Bedienungsanleitung (PDF-
Datei) und Setup-Programm angeben. Es wird
davon abgeraten, das Installationsverzeichnis
zu ändern.
•
Um das Verzeichnis zu ändern, klicken Sie auf
[Browse…] (Durchsuchen), und wählen Sie
Laufwerk und Verzeichnis aus.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Verwenden des installierten
Deinstallieren (Entfernen
Plug-in-Effekts in einer anderen
installierter Plug-in-Effekte)
Host-Anwendung
1
2
Wählen Sie [Start] ➝ [(Alle) Programme] ➝
[YAMAHA VST Plugins] ➝ [(Name des
Plug-in-Effekts)] ➝ [Setup].
Auch nach der Installation des Plug-in-
Effekts müssen Sie, wenn Sie diesen in einer
anderen VST-kompatiblen Host-Anwendung
verwenden möchten, das Effekt-Plug-in-
Modul manuell in den von der Host-
Anwendung festgelegten Ordner
„VstPlugins“ kopieren.
Es erscheint ein Begrüßungsfenster.
Klicken Sie auf [Remove] (Entfernen) und
dann auf [Next] (Weiter).
Daraufhin wird ein Fenster angezeigt, in
dem Sie aufgefordert werden, die
Löschung der Dateien zu bestätigen.
1
Wählen Sie [Start] ➝ [(Alle) Programme] ➝
[YAMAHA VST Plugins] ➝ [(Name des
Plug-in-Effekts)] ➝ [Setup].
3
Klicken Sie auf [OK], um die Dateien zu
entfernen.
Es erscheint ein Begrüßungsfenster.
2
3
Klicken Sie auf [Modify] (Ändern) und dann
auf [Next] (Weiter).
•
Um den Vorgang abzubrechen, klicken Sie
auf [Cancel] (Abbrechen).
Im daraufhin angezeigten Fenster können
Sie das Zielverzeichnis angeben, in das
der Plug-in-Effekt kopiert werden soll.
Wählen Sie den Ordner „VstPlugins“ aus,
der der Host-Anwendung entspricht, in der
Sie den Plug-in-Effekt verwenden möchten
(kreuzen Sie diesen Ordner an).
•
Die Verarbeitungsgeschwindigkeit von Computern, die
mit einem Pentium I-Prozessor ausgestattet sind,
sowie von einigen Computern mit Pentium IV-
Prozessor kann deutlich verlangsamt werden, wenn
Sie Pitch Fix und Cubase SX2.0 verwenden.
Falls dieses Problem auftritt, laden Sie bitte von der
folgenden URL eine aktualisierte Version von Pitch Fix
herunter (1.0.2 oder höher):
•
•
Indem Sie das Kontrollkästchen des Ordners
für die installierte Host-Anwendung
deaktivieren, können Sie den installierten
Plug-in-Effekt entfernen.
http://www.yamahasynth.com/down/index.htm
Einzelheiten hierzu finden Sie in der
Bedienungsanleitung der jeweiligen Host-
Anwendung.
4
Klicken Sie auf [Next] (Weiter).
Der Kopiervorgang wird ausgeführt.
•
Um den Vorgang abzubrechen, klicken Sie
auf [Cancel] (Abbrechen).
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Für Macintosh-Anwender
Inhalt der CD-ROM
Die Software für Macintosh befindet sich auf zwei CD-ROMs (im Lieferumfang der mLAN16E ist
lediglich TOOLS for i88X/mLAN16E enthalten). Installieren Sie als erstes TOOLS for i88X/
mLAN16E.
G TOOLS for i88X/mLAN16E
Name der
Anwendung
Ordnername
Inhalt
Dient zum Anzeigen der Programmanleitungen im PDF-Format.
• Drücken Sie die Taste [F1] der Computertastatur, um die Online-Hilfe
zu öffnen.
Acroread_
Acrobat Reader*1*2
Diese Software enthält mLAN-Treiber und Anwendungen, die zum
Herstellen der Verbindungen zwischen den mLAN-Geräten und dem
Computer benötigt werden. Installieren Sie die Software, während die
mLAN-Geräte ausgeschaltet sind.
mLAN Applications
for YAMAHA
mLAN Tools
• Anweisungen zur Installation finden Sie auf Seite 30.
mLAN_
Mit einem einzigen Installationsverfahren werden alle für die mLAN-
Kommunikation erforderlichen Anwendungen installiert. Zu der zu
installierenden Software zählen mLAN Auto Connector und mLAN
Graphic Patchbay, die zur Einrichtung von Audio- und MIDI-
Verbindungen für ein mLAN-Netzwerk verwendet werden.
Diese Software wird benötigt, um MIDI-Daten (Fernbedienungs- und
Open Music System Studio-Manager-Daten) zwischen einem mLAN-Gerät und einem
(OMS) 2.3.8*2
Computer zu übertragen.
• Anweisungen zur Installation finden Sie Seite 31.
OMS_
OMS Setup for
YAMAHA (Ordner)
Enthält OMS-Setup-Dateien für ein mLAN-Gerät (Seite 36).
G Plug-in Effect (nur im Lieferumfang des i88X enthalten)
• Diese Software kann innerhalb eines VST-kompatiblen Programms als Plug-in-Anwendung
verwendet werden.
• Anweisungen zur Verwendung der Anwendung finden Sie in der PDF-Anleitung.
(Angegebenes Zielvolume)/YAMAHA/Plug-in Effect/(der entsprechende Ordner der Software)
• Anweisungen zur Installation von Plug-in-Effekten finden Sie auf Seite 38.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Name der
Anwendung
Ordnername*3
Inhalt
Diese Softwareanwendung reproduziert die in jeden Kanal des
Digital Mixing Studio 01X von Yamaha integrierten EQ- und
Dynamikeffekte und verwendet die Rechenleistung des
Computers für die Effekte.
Sie können die Dynamikfunktionen und die Funktionen des 4-
Band-Equalizers (diese sind auch auf den digitalen Mischpulten
von Yamaha zu finden) als Effekt-Software verwenden.
Außerdem können Sie die 01X-Einstellungen importieren und
so die am 01X erstellten Songs reproduzieren.
01X Channel
Module*1
Dieses Programm dient zur Bearbeitung der Tonhöhe von
aufgenommenen Gesangsstimmen. Über die Funktion als
reiner Tonhöhenprozessor hinaus kann es verwendet werden,
um den Charakter der Gesangsstimme zu verändern.
Außerdem können Sie über MIDI-Daten in der Host-
Anwendung den Pitch-Fix-Effekt steuern. Weitere
Informationen zum Einrichten für die Host-Anwendung finden
Sie in der PDF-Anleitung zu Pitch Fix.
Pitch Fix*1
Mac OS 9
VST_
Hierbei handelt es sich um ein Multi-Effekt-Programm zur
Verarbeitung von Gesangsstimmen. Das Plug-in verfügt über
mehrere Effekte, einschließlich einem Hochpassfilter,
Kompressor und 3-Band-Equalizer.
Vocal Rack*1
Final Master*1
Hierbei handelt es sich um ein Multi-Effekt-Programm für
Mastering-Zwecke. Es verfügt über einen Kompressor, einen
Limiter und eine Soft-Clip-Funktion und ermöglicht Ihnen die
Aufspaltung des Signals in drei Bänder zur separaten Multi-
Band-Verarbeitung.
*1 Diese Anwendungen werden mit Online-Hilfedateien/PDF-Anleitungen ausgeliefert.
*2 Leider gibt Yamaha keine Garantie für die Stabilität dieser Programme und kann den Anwendern auch
keine technische Unterstützung dafür anbieten.
*3 Über die Plug-in-Effekte, die mit Mac OS X kompatibel sind
Die folgenden Plug-in-Effekte, die mit VST und Audio Units kompatibel sind, sind im Ordner „Mac OS
X“ enthalten.
• 01X Channel Module
• Pitch Fix
• Vocal Rack
• Final Master
Zu diesem Zeitpunkt können diese Software-Effekte leider nicht mit i88X/mLAN16E benutzt werden,
da der Audio/MIDI-Treiber für i88X/mLAN16E noch nicht mit Mac OS X kompatibel ist.
Wir bemühen uns in Zusammenarbeit mit Apple Computer, Inc. um baldige Kompatibilität der i88X/
mLAN16E mit Mac OS X. Neueste Informationen erhalten Sie auf folgender Website:
http://www.yamahasynth.com
Diese Site enthält außerdem Anweisungen zur Installation der Software-Effekte für OS X
Bei Macintosh-Notebooks wie dem iBook und PowerBook müssen Sie immer zuerst das mLAN-Gerät
und das mLAN-Kabel anschließen und dann das mLAN-Gerät einschalten, bevor Sie den Computer
starten.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Systemanforderungen für i88X/mLAN16E-Software
Für die Benutzung der mitgelieferten Software gelten die folgenden Systemanforderungen.
•
•
Die nachfolgend angegebenen Systemanforderungen können je nach Betriebsystemversion geringfügig abweichen.
Einzelheiten zu den Mindestanforderungen für jede DAW-Software (Digital Audio Workstation) erhalten Sie im
entsprechenden Benutzerhandbuch.
*2 Ohne Acrobat Reader.
G i88X/mLAN16E (einschließlich der
Anforderungen für mLAN Tools 2.0/
mLAN Applications for YAMAHA)
Es folgen die gesamten Systemanforderun-
gen, einschließlich Audio-Sequenzer, mLAN
Tools 2.0/mLAN Applications for YAMAHA
und Plug-in-Effekte.
*3 Die hier aufgeführten Systemanforderungen
gelten, wenn die im Lieferumfang enthaltene
Software verwendet wird und die nachfolgend
genannten Audio-/MIDI-Daten mit einer
standardmäßigen Sequenzeranwendung
abgespielt werden. Je nach verwendeter
Sequenzersoftware kann es Abweichungen
geben.
Betriebs-
system
: Mac OS 9.2 (Die Umgebungen
Mac OS X und Mac Classic werden
nicht unterstützt.)
Empfohlene Systemanforderungen (Anschließen
eines einzigen mLAN-Geräts an einen Computer,
wobei beide gleichberechtigt sind)
Computer : System mit integriertem S400-
FireWire-Anschluss (400 Mbps). (*1)
Festplatte : Mindestens 250 MB (i88X) / 50 MB
(mLAN16E) freier Speicherplatz;
schnelle Festplatte (*2)
G Empfohlenes System (*3)
Frequenz=4411kHz/24-Bit
Audiotreiber 18 Eingänge/18 Ausgänge
(i88X), 16 Eingänge/8 Ausgänge (mLAN16E)
MIDI-Treiber 1 Eingang/1 Ausgang (i88X),
3 Eingänge/3 Ausgänge (mLAN16E)
16 MIDI- und 12 Audio-Wiedergabespuren
2 Audio-Aufnahmespuren
2 Sendekanäle für Software-Plug-in-Effekt
10 Insertion-Kanäle für Software-Plug-in-
Effekt
2 Kanäle für Software-Plug-in-Synthesizer
Latenz von 5ms oder weniger
• Anschließen eines einzigen mLAN-Geräts
an einen Computer, wobei beide
gleichberechtigt sind:
Computer
: G4/G3-Prozessor mit
900 MHz (oder höher)
: 512 MB oder mehr
(der virtuelle Speicher
muss abgeschaltet
werden)
Verfügbarer
Arbeitsspeicher
Empfohlene Systemanforderungen (Anschließen
eines Computers und dreier mLAN-Geräte)
• Anschließen von drei mLAN-Geräten an
einen Computer:
Frequenz=44,1kHz/24-Bit
Audiotreiber 32 Eingänge/32 Ausgänge
(insgesamt)
MIDI-Treiber 4 Eingänge/5 Ausgänge
(insgesamt)
16 MIDI- und 8 Audio-Wiedergabespuren
2 Audio-Aufnahmespuren:
2 Sendekanäle für Software-Plug-in-Effekt
10 Insertion-Kanäle für Software-Plug-in-
Effekt
Computer
: G4-Singleprozessor
mit 1,25 GHz,
G4-Dualprozessor mit
1 GHz oder höher
: 512 MB oder mehr
(der virtuelle Speicher
muss abgeschaltet
werden)
Verfügbarer
Arbeitsspeicher
G Minimale Systemanforderungen (*3)
Computer
: G4-Dualprozessor mit
450 MHz oder G4/
G3-Prozessor mit 700
MHz (oder höher)
: 320 MB oder mehr
(der virtuelle Speicher
muss abgeschaltet
werden)
2 Kanäle für Software-Plug-in-Synthesizer
Latenz von 5ms oder weniger
Minimale Systemanforderungen
Verfügbarer
Arbeitsspeicher
Frequenz=44,1kHz/16-Bit
Audiotreiber 8 Eingänge/2 Ausgänge (i88X),
2 Eingänge/2 Ausgänge (mLAN16E)
*1 Der Computer muss über einen IEEE1394-
(FireWire) oder i.Link-Anschluss verfügen.
Wenn kein Anschluss vorhanden ist,
installieren Sie eine IEEE1394-
MIDI-Treiber 1 Eingang/1 Ausgang (i88X),
2 Eingänge / 2 Ausgänge (mLAN16E)
16 MIDI- und 12 Audio-Wiedergabespuren
2 Sendekanäle für Software-Plug-in-Effekt
6 Insertion-Kanäle für Software-Plug-in-
Effekt
Kein Software-Plug-in-Synthesizer
Latenz von etwa 50 ms
Schnittstellenkarte (PCI oder PC).
Weitere Einzelheiten zu Systemanforderun-
gen und empfohlenen PCI- oder PC-Karten
finden Sie unter
http://www.yamahasynth.com
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
29
Download from Www.Somanuals.com. All Manuals Search And Download.
G Plug-in Effect (nur im Lieferumfang des
i88X enthalten)
Betriebssystem
: Mac OS 8.6 bis 9.2
Mac OS X 10.2:
•
•
Es können bis zu zwei PCI- oder PC-Karten
verwendet werden. Sie können jedoch nur jeweils
eine Karte gleichzeitig benutzen.
Wenn Sie eine im Computer eingebaute IEEE1394-
Schnittstelle verwenden, können Sie nur eine
IEEE1394-PCI- oder PC-Karte benutzen.
•
Wenn Sie ein PowerBook im Batteriebetrieb
nutzen, rufen Sie den Eintrag Apple-Menü ➝
[Kontrollfelder] ➝ [Energie sparen] ➝ [Mehr
Optionen] (Einstellungen für: Batterie), und
entfernen Sie die Markierung im Kontrollkästchen
„Prozessorgeschwindigkeit reduzieren“.
Bei Verwendung eines iBooks/Powerbooks ist unter
Umständen kein integrierter IEEE-1394-Anschluss
vorhanden. Installieren Sie in diesem Fall eine
geeignete PC-Schnittstellenkarte.
Software-Installation
Anweisungen zur Installation von hier nicht aufgeführten Anwendungen finden Sie auf Seite 27im
Abschnitt „Inhalt der CD-ROM“.
Acrobat Reader
3
4
Doppelklicken Sie auf „Reader Installer“.
Das Dialogfeld „Acrobat Reader Setup“ wird
angezeigt.
Um die elektronischen Anleitungen (im PDF-
Format) der einzelnen Anwendungen lesen zu
können, müssen Sie Acrobat Reader installieren.
Führen Sie die Installation aus, indem Sie den
Anweisungen auf dem Bildschirm folgen.
Nach erfolgreicher Installation befindet sich
auf Ihrem Mac der Acrobat-Ordner
1
Doppelklicken Sie auf den Ordner
„Acroread_“. Es werden Ordner für drei
verschiedene Sprachen angezeigt: Englisch,
Deutsch, Französisch, und Japanisch.
(standardmäßig auf dem Startvolume).
2
Wählen Sie die Sprache, die Sie verwenden
möchten, und doppelklicken Sie auf den
entsprechenden Ordner. „Reader Installer“
wird angezeigt.
Informationen über die Verwendung von
Acrobat Reader finden Sie im Reader Guide im
Hilfemenü von Acrobat Reader.
Der Name des Installationsprogramms kann
je nach ausgewählter Sprache variieren.
mLAN-Software und OMS
Die Software mLAN Tools 2.0 beinhaltet einen Treiber, mit dem Sie mLAN-Geräte an einen Computer
anschließen können.
mLAN-Kabel zwischen einem Computer und mLAN-Geräten. Diese Softwareanwendung ermöglicht
Ihnen, das i88X, die mLAN16E oder das 01X über mLAN an einen Computer anzuschließen.
Gehen Sie zur Installation dieser Softwareanwendungen wie folgt vor.
•
•
Beschreibungen der Fehlermeldungen finden Sie auf
Seite 39.
Informationen zur Deinstallation (Entfernen installierter
Anwendungen) finden Sie auf Seite 32.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
30
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Nach dem Neustart des Macintosh befindet
sich auf dem Computer ein Ordner namens
„Opcode“/“OMS Applications“ (standardmäßig
auf dem Startvolume).
Vorbereitungen zur Installation
1
Starten Sie den Computer.
VORSICHT
Stellen Sie bei Verwendung der mLAN-
Verbindung sicher, dass alle
Energiesparfunktionen auf dem Computer
(wie Ruhezustand, Anhalten, Standby oder
Pause) deaktiviert sind. Wenn der virtuelle
Speicher benutzt wird, schalten Sie ihn aus
und starten den Computer neu.
10
Kopieren Sie die Datei „OMS_2.3_Mac.pdf“
von der CD-ROM in das Verzeichnis „OMS
Applications“ (zum Beispiel durch Ziehen
und Ablegen).
In der Datei „OMS_2.3_Mac.pdf“ (nur auf
Englisch verfügbar) finden Sie
Informationen zur Verwendung des
Programms.
•
11
Kopieren Sie „OMS Setup for YAMAHA“
von der CD-ROM in das Verzeichnis „OMS
Applications“ (zum Beispiel durch Ziehen
und Ablegen).
Im Ordner „OMS Setup for YAMAHA“
finden Sie die OMS-Setup-Dateien für das
i88X und die mLAN16E, die Sie als
Vorlagen verwenden können.
•
Wenn Sie die Standard-Datenübertragungsrate
S200 verwenden (überprüfen Sie dies an der
Rückseite des jeweiligen Geräts, oder schlagen
Sie die technischen Daten in der Bedienungsanlei-
tung nach), müssen Sie zuvor die alte Version von
mLAN Tools deinstallieren. (Beachten Sie auch die
Bedienungsanleitung Ihres speziellen Geräts.)
2
3
Beenden Sie alle laufenden Anwendungen,
und schließen Sie alle geöffneten Fenster.
mLAN-Software
Ziehen Sie alle MIDI-Kabel heraus, über die
MIDI-Geräte an die MIDI IN/OUT-Anschlüsse
des mLAn-Geräts angeschlossen sind.
12
Doppelklicken Sie auf das Symbol
„YAMAHA mLAN Installer“ im Ordner
„mLAN_“, so dass das folgende Installati-
onsfenster angezeigt wird. Das Feld „Install
Location“ („Installationsspeicherort“) zeigt
den Zielordner der Installation an. Wenn
Sie Ziellaufwerk oder --ordner ändern
möchten, klicken Sie auf die Schaltfläche
[Switch Disk] (Laufwerk wechseln), und
geben Sie im Pop-Up-Menü das
4
Verbinden Sie das mLAN-Gerät über ein
IEEE-1394-(FireWire/iLink)-Kabel direkt mit
dem Computer (nicht über einen Hub), und
ziehen Sie alle anderen über IEEE 1394
angeschlossenen Geräte vom Computer ab.
5
Legen Sie die mitgelieferte CD-ROM
(„TOOLS for i88X/mLAN16E“) in das
CD-ROM-Laufwerk ein.
gewünschte Ziel an.
OMS (Open Music System)
•
Normalerweise muss das Zielverzeichnis nicht
geändert werden.
6
7
8
Doppelklicken Sie auf den Ordner „OMS_“
(nur englische Version).
„Install OMS 2.3.8“ wird angezeigt.
Doppelklicken Sie auf „Install OMS 2.3.8“.
Das Dialogfenster „OMS Setup“ wird
angezeigt.
Führen Sie die Installation aus, indem Sie den
Bildschirmanweisungen folgen.
Klicken Sie nach der Installation auf „Restart“
(Neustart).
•
Nach Beendigung der Installation wird u.U. eine
Fehlermeldung angezeigt, die darauf hinweist,
dass das Installationsprogramm nicht
geschlossen wurde. Wechseln Sie in diesem Fall
in das Menü „File“ (Datei), und wählen Sie „Quit“
(Beenden) aus, um das Installationsprogramm zu
beenden. Starten Sie dann den Computer neu.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
31
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Achten Sie darauf, dass „Easy install“ („Ein-
fache Installation“) gewählt ist und klicken
Sie auf [Install] („Installieren“). Klicken Sie
im darauf folgenden Bestätigungsdialog auf
Der von Ihnen angegebenen Ordner
Ordner mLAN Tools
Opcode/OMS Applications
14[Continue] (Fortfahren).
Wenn eine Meldung „OMS Folder cannot
Systemordner
Kontrollfelder/mLAN Driver Setup
Ordner OMS/mLAN OMS Driver
Preferences/mLAN HALs/01XTransporter.hal
Preferences /mLAN HALs/i88XTransporter.hal
Preferences/mLAN HALs/
be found in the system folder“ („Kein OMS-
Ordner im Systemordner gefunden“) o.ä.
erscheint, kopieren Sie nach der Installation
die Datei „mLAN OMS Driver“ (zu finden im
Ordner „Into OMS Folder“ innerhalb des
Ordners „mLAN Tools“ im Zielordner der
Installation) in den Ordner „OMS Folder“ im
mLAN16ETransporter.hal
15Systemordner.
Es wird eine Meldung angezeigt, die Sie
auffordert, den Ordner mit den ASIO-
Treibern zu suchen. Klicken Sie auf [OK].
Preferences /mLAN Prefs/mLAN Control Panel
Prefs
Preferences /mLAN Prefs/oui.tbl
16Das Suchergebnis wird angezeigt.
Wählen Sie das Installationsziel für den
ASIO-mLAN-Treiber und klicken auf [OK].
* Löschen Sie die oben aufgeführten Dateien
und Ordner, wenn Sie die Software
deinstallieren. Achten Sie darauf, keine
Daten zu löschen, die bereits vor der
Installation vorhanden waren, einschließlich
der Dateien für OMS.
•
Wenn eine Meldung „ASIO Driver folder cannot
be found in the system folder“ („Kein Ordner
namens ASIO Drivers im Systemordner gefun-
den“) o.ä. erscheint, kopieren Sie nach der Instal-
lation die Datei „ASIO mLAN Basic“ (zu finden im
Ordner „Into ASIO Drivers“ innerhalb des Ordners
„mLAN Tools“ im Zielordner der Installation) in
Ändern von Einstellungen nach
der Installation
17 den Ordner „ASIO Drivers“ im Systemordner.
Im Fenster „mLAN Driver Setup“ (Einrichtung
des mLAN-Treibers) können die mLAN-
bezogenen Einstellungen nach der Installation
das mLAN Driver Setup im Ordner
„Kontrollfelder“.
18Schalten Sie das mLAN-Gerät ein.
Nach Beendigung der Installation wird die
Meldung „Installation was successful.“
(Installation war erfolgreich.) angezeigt.
Klicken Sie auf [Restart] (Neu starten).
Bestätigen der Installation
Der mLAN Installer kopiert die folgenden
Dateien an die folgenden Stellen.
mLAN Driver Setup (Einrichtung des
mLAN-Treibers)
In diesem Fenster können Sie die mLAN-
Einstellungen zum Empfangen/Senden von
Daten überprüfen und ändern. Bevor Sie
Änderungen vornehmen, müssen Sie alle
Anwendungen (DAW usw.) schließen, die die
mLAN-Verbindung verwenden. Die
Einstellungen hier entsprechen denen unter
Windows. Siehe Seite 15.
Ordner „Kontrollfelder“ im Systemordner
des Startvolumes
mLAN Driver Setup (Setup des mLAN-
Treibers) (Seite 15)
•
Im mLAN Driver Setup (Seite 15) können Sie prüfen,
ob die Daten korrekt über mLAN gesendet und
empfangen werden.
Ordner „Systemerweiterungen“ im
Systemordner des Startvolumes
mLAN Driver
mLAN Driver Plugs
mLAN Expert
•
•
•
Die WDM-Einstellung gilt nur für Windows.
Die [EXIT]-Taste ist nur für Windows vorgesehen.
Um die Wordclock (Sample Rate) und die Anzahl der
verwendeten Kanäle zu ändern, starten Sie mLAN
Auto Connector im Ordner mLAN Tools.
mLAN Family
mLAN Transporter Family
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Anschließen eines Computers an ein mLAN-Gerät über mLAN
•
Wenn Sie Auto Connector verwenden, nachdem Sie in
mLAN Graphic Patchbay Verbindungen hergestellt
haben, werden die in mLAN Graphic Patchbay
vorgenommenen Verbindungseinstellungen
aufgehoben.
Sie können mLAN Graphic Patchbay auch benutzen,
um einen Computer an ein einzelnes,
gleichberechtigtes mLAN-Gerät anzuschließen.
In diesem Abschnitt wird das Verfahren
beschrieben, mit dem Sie in mLAN Auto
Connector einen Computer an ein
gleichberechtigtes, einzelnes mLAN-Gerät
anschließen.
In mLAN Auto Connector können Sie ganz
einfach ein mLAN-Gerät anschließen, indem
Sie die Wordclock und die Anzahl der Kanäle
für die Ein- und Ausgabe von Audiosignalen
einrichten.
Um mehrere mLAN-Geräte an einen Computer
anzuschließen, verwenden Sie mLAN Graphic
Patchbay. Weitere Informationen über mLAN
Graphic Patchbay finden Sie in der Online-
Anleitung von mLAN Graphic Patchbay.
•
•
Das Fenster von mLAN Auto Connector kann
unterschiedlich aussehen, wenn bestimmte mLAN-
Geräte angeschlossen sind.
1
2
Schließen Sie mithilfe eines IEEE-1394-Kabels
einen Computer an ein mLAN-Gerät an.
Öffnen Sie den Ordner „mLAN Tools“, und
klicken Sie dann auf das Programmsymbol
„mLAN Auto Connector“.
mLAN Auto Connector wird gestartet.
3
Richten Sie die Wordclock ein und legen Sie
die Anzahl der Audiokanäle fest (siehe unten),
und klicken Sie dann auf die Schaltfläche
[Connect] (Verbindung herstellen). Der
Computer und das mLAN-Gerät sind nun über
mLAN verbunden.
•
Beim Anschließen eines mLAN-Geräts in mLAN Auto
Connector können Störgeräusche auftreten.
Verringern Sie den Lautstärkepegel der
angeschlossenen Geräte, bevor Sie in mLAN Auto
Connector Verbindungen herstellen.
Anschließen des i88X
q
w
e
r
t
y
u
i
!
!
o
qNickname (Spitzname)
wModel name (Name des Modells)
Mithilfe dieses Parameters können Sie in einem
Netzwerk mit mehreren mLAN-Geräten ein
mLAN-Gerät auswählen, zu dem Sie eine
Verbindung herstellen möchten.
Dieses Feld gibt den unverwechselbaren
Spitznamen des angeschlossenen i88X an.
Einzelheiten dazu, wie Sie den Nickname
ändern können, finden Sie im Abschnitt
„Knoteninformationen“ in der Online-Anleitung
von mLAN Graphic Patchbay.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
33
Download from Www.Somanuals.com. All Manuals Search And Download.
eSchaltfläche [Update] (Aktualisieren)
Wenn Sie auf diese Schaltfläche klicken, werden
die Informationen über die an das mLAN-
Netzwerk angeschlossenen mLAN-Geräte
aktualisiert. Verwenden Sie diese Taste, wenn
Sie zum Netzwerk ein mLAN-Gerät hinzufügen,
während mLAN Auto Connector läuft.
iMac ← i88X
Mithilfe dieses Parameters können Sie die
Anzahl der Kanäle festlegen, über die
Audiodaten zu den Buchsen INPUT 1–8
(analog), DIGITAL STEREO COAXIAL oder
OPTICAL IN (digital) oder ADAT IN (ADAT)
des i88X geführt und an den Computer
ausgegeben werden.
rSchaltfläche [Identify] (Identifizieren)
Wenn Sie auf diese Schaltfläche klicken, blinkt
die ACTIVE-LED (Aktivanzeige) des i88X ein
paar Sekunden lang.
o[Schaltfläche [Connect] (Verbindung
herstellen)
Klicken Sie auf diese Schaltfläche, um das i88X
über mLAN an den Computer anzuschließen.
tSample Rate (Sampling-Frequenz)
Mithilfe dieses Parameters können Sie die
Sampling-Frequenz (Wordclock-Frequenz)
einstellen.
!Schaltfläche [Cancel] (Abbrechen)
Klicken Sie auf diese Schaltfläche, um die
Einstellungen rückgängig zu machen und
mLAN Auto Connector zu beenden.
yOptionsfelder „Wordclock Master“
(Haupttaktgeber)
![Schaltfläche [Setup]
Mit diesen Feldern können Sie den Computer
oder das i88X zum Haupttaktgeber machen.
Klicken Sie auf diese Schaltfläche, um das
Fenster „Control Panel“ des i88X zu öffnen, in
dem Sie die Übergangszeit der Wordclock
einstellen können.
uMac → i88X
Mithilfe dieses Parameters können Sie die
Anzahl der Kanäle festlegen, über die vom
Audioausgang des Computers (dem
Audioausgang des mLAN-Treibers) Audiodaten
zum i88X geführt werden. In die i88X geführte
Signale werden über die Buchsen OUTPUT 1-8
(analog), DIGITAL STEREO COAXIAL oder
OPTICAL OUT (digital) oder ADAT OUT
(ADAT) des i88X ausgegeben.
Anschließen der mLAN16E (MOTIF ES)
q
w
e
r
y
t
u
i
!
!
o
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
34
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Weitere Informationen über die Audio- und MIDI-
Anschlüsse eines MOTIF ES mit installierter
mLAN16E finden Sie im Abschnitt „Systembeispiele“ in
der Bedienungsanleitung der mLAN16E.
qNickname (Spitzname)
Dieses Feld gibt den unverwechselbaren
Spitznamen der angeschlossenen mLAN16E an.
Einzelheiten dazu, wie Sie den Nickname
ändern können, finden Sie im Abschnitt
„Knoteninformationen“ in der Online-Anleitung
von mLAN Graphic Patchbay.
oSchaltfläche [Connect] (Verbindung
Klicken Sie auf diese Schaltfläche, um die
mLAN16E über mLAN an den Computer
anzuschließen.
wModel name (Name des Modells)
Mithilfe dieses Parameters können Sie in einem
Netzwerk mit mehreren mLAN-Geräten ein
mLAN-Gerät auswählen, zu dem Sie eine
Verbindung herstellen möchten.
Wenn die mLAN16E angeschlossen ist, wählen
Sie den Name des mit einer mLAN16E
ausgestatteten Geräts aus.
Klicken Sie auf diese Schaltfläche, um die
Einstellungen rückgängig zu machen und
!Schaltfläche [Setup]
Klicken Sie auf diese Schaltfläche, um das
Fenster „Control Panel“ der mLAN16E zu
öffnen, in dem Sie die Übergangszeit der
Wordclock einstellen können.
eSchaltfläche [Update] (Aktualisieren)
Wenn Sie auf diese Schaltfläche klicken, werden
die Informationen über die an das mLAN-
Netzwerk angeschlossenen mLAN-Geräte
aktualisiert. Verwenden Sie diese Taste, wenn
Sie zum Netzwerk ein mLAN-Gerät hinzufügen,
während mLAN Auto Connector läuft.
Einstellen der Übergangsgeschwindigkeit
für die Wordclock (mLAN-Kontrollfeld)
Wenn Sie in mLAN Auto Connector oder
mLAN Graphic Patchbay im Fenster „Node
Information“ auf die Schaltfläche [Setup]
klicken, zeigt der Computer das mLAN-
Kontrollfeld an, in dem Sie die
rSchaltfläche [Identify] (Identifizieren)
Wenn Sie auf diese Schaltfläche klicken, blinkt
die ACTIVE-LED (Aktivanzeige) der
mLAN16E ein paar Sekunden lang.
Übergangsgeschwindigkeit der Wordclock
einstellen können.
tSample Rate (Sampling-Frequenz)
Mithilfe dieses Parameters können Sie die
Sampling-Frequenz (Wordclock-Frequenz)
einstellen.
Mit dem Parameter „Wordclock Transition
Speed“ können Sie festlegen, wie schnell die
ursprüngliche Wordclock-Einstellung zu
einer neuen Einstellung umgeändert wird,
wenn das mLAN-Gerät im mLAN-Netzwerk
als Slave (untergeordnetes Gerät) fungiert.
Slow (Langsam):
yOptionsfelder „Wordclock Master“
(Haupttaktgeber)
Mit diesen Feldern können Sie den Computer
oder die mLAN16E zum Haupttaktgeber
machen.
Diese Option können Sie in den meisten
Fällen auswählen.
Fast (Schnell):
uMac → MOTIF ES
Wählen Sie diese Option, wenn der
Haupttaktgeber als Synchronisationsbezug
Zeitcode, z. B. MTC, sendet und so die
Einstellung der Wordclock ändert.
Mithilfe dieses Parameters können Sie die
Anzahl der Kanäle festlegen, über die vom
Audioausgang des Computers (dem
Audioausgang des mLAN-Treibers) Audiodaten
zur mLAN16E geführt werden.
4
Klicken Sie auf die Schaltfläche [Connect]
(Verbindung herstellen). Wenn das mLAN-
Gerät korrekt angeschlossen ist, wird mLAN
Auto Connector beendet, und die mLAN-
Kommunikation beginnt.
iMac ← MOTIF ES
Mit diesem Parameter legen Sie die Anzahl der
Kanäle fest, über dieAudiosignale vom Ausgang
der mLAN16E zum Computer geführt werden.
•
Falls keine Verbindung hergestellt werden kann,
starten Sie erneut mLAN Auto Connector, und
klicken Sie dann noch einmal auf die Schaltfläche
[Connect]. Es ist nicht erforderlich, den Computer
neu zu starten.
•
Die Anzahl der Audiosendekanäle und MIDI-Ports
variiert je nach den verschiedenen mLAN16E-
kompatiblen Geräten.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen von OMS
•
Wenn Sie mLAN auf Ihrem Macintosh mit zusätzlich
installierter IEEE-1394-(FireWire) Schnittstellenkarte
benutzen, erzeugen Sie im auf der Installations-CD-
ROM enthaltenen OMS Setup ein neues Studio Setup.
Einzelheiten hierzu finden Sie in der Anleitung zu OMS.
1
Doppelklicken Sie auf die Ordner „OMS“ und
„OMSSetup for YAMAHA“. Es erscheinen die
Dateien „i88X-mLAN“, „MOTIF-ES-mLAN“
und „mLAN Generic 16 ports“. Kopieren Sie
diese auf die Festplatte Ihres Computers.
2
Wenn Sie mithilfe von Auto Connector ein
einziges i88X oder eine mLAN16E
(einschließlich MOTIF ES) anschließen,
doppelklicken Sie auf „i88X-mLAN“ oder
„MOTIF ES-mLAN“.
Die Einstellungsnamen (Gerätenamen) jedes
MIDI-Ports sind nachfolgend dargestellt, wenn
die Studio-Setup-Datei geladen ist. Stellen Sie
die für von Ihnen verwendete Anwendung
geeigneten Geräte (Ports) ein.
Wenn Sie mithilfe von Graphic Patchbay
mehrere mLAN-Geräte anschließen oder
mithilfe von Auto Connector eine einzelne
mLAN16E (MOTIF ES ausgenommen)
anschließen, doppelklicken Sie auf „mLAN
Generic 16 Ports“. Das OMS-Setup wird
gestartet.
Funktion des i88X-Ports (Auto Connector)
MIDI-
Port
Gerätename
Funktion
MIDI-Port des i88X (MIDI
an (von) mLAN-MIDI-
Konvertierung)
1
MIDI
Funktion des MOTIF-ES-Ports (Auto Connector)
MIDI-
3
Nachdem das OMS-Setup gestartet wurde,
wird die in Schritt Nr. 2 doppelt angeklickte
Studio-Setup-Datei geöffnet.
Gerätename
Funktion
Port
Steuert einen
Klangerzeuger.
1
2
3
TG
PLG
Steuert ein Plug-in.
Remote B
(Ferngerät B)
Steuert eine DAW oder
einen Editor.
Falls rechts neben dem Namen der Setup-
Remote A
(Ferngerät A)
Steuert eine DAW oder
einen Editor.
4
Datei nicht „
“ angezeigt wird, wählen Sie
im Menü [File] (Datei) die Option [Make
Current] (Aktualisieren) aus, und führen Sie
den Speichervorgang aus.
Das Einrichten von OMS Studio ist
abgeschlossen. Zur Verwendung der
Software müssen Sie zusätzlich den OMS-
Port einstellen.
•
Sie können jedem MIDI-Port am MOTIF ES eine
Funktion zuweisen. In diesem Beispiel werden
typische Gerätenamen verwendet.
Port-Funktionen in mLAN Graphic Patchbay und
an der mLAN16E (ausgenommen MOTIF ES)
Ziehen Sie auch die Bedienungsanleitung
Ihrer Anwendung zu Rate.
MIDI-
Port
Gerätename
Funktion
1
2
Port 1
Port 2
. . . .
Die Port-Funktionen
können je nach dem
spezifischen mLAN-Gerät
variieren. Ziehen Sie auch
die Bedienungsanleitungen
Ihrer mLAN-Geräte zu
Rate.
. . . .
•
Mit einem Doppelklick auf das Symbol des mLAN-
Geräts oder Ausführen von „MIDI Device Info…“
im „Studio“-Menü durch Auswählen des mLAN-
Gerätes wird der Device-Info-Dialog geöffnet. Wir
empfehlen Ihnen, die Kanalzuordnung nicht zu
ändern, da sie von der Setupanwendung (mLAN
Auto Connector usw.) bereits für die optimale
Verwendung mit i88X und mLAN16E eingestellt
wurde. Stellen Sie alles wieder wie in folgender
Abbildung gezeigt ein, falls Sie versehentlich
etwas geändert haben sollten.
16
Port 16
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
36
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Die Port-Nummern unter „mLAN Generic 16 ports“ im
Studio-Setup entsprechen den in mLAN Graphic
Patchbay in der Spalte „Connector Name“ angezeigten
Nummern. Weitere Informationen über mLAN Graphic
Patchbay finden Sie in der Online-Anleitung von mLAN
Graphic Patchbay.
Nachdem Sie mit den obigen Anweisungen das OMS
Studio Setup eingerichtet haben, erkennt Ihr Computer
nur Yamaha-mLAN-(MIDI-)Geräte. Wenn Sie andere
Geräte über USB anschließen, oder wenn Sie ein
mLAN-(MIDI-)Gerät zum Netzwerk hinzufügen,
während Sie bereits OMS verwenden, sollten Sie eine
eigene Studio-Setup-Datei erzeugen. Informationen
dazu finden Sie in der mitgelieferten Online-
Bedienungsanleitung von OMS.
•
Je nach Macintosh/Mac OS-Version funktioniert die
mitgelieferte OMS-Studio-Setup-Datei u.U. nicht,
obwohl Sie die oben beschriebene Verfahrensweise
befolgt haben. (Obwohl das Setup ordnungsgemäß
beendet wird, können keine MIDI-Daten gesendet/
empfangen werden.) Schließen Sie in diesem Fall
Ihren Macintosh an das mLAN-Gerät an, und erstellen
Sie die Setup-Datei folgendermaßen neu.
1
Starten Sie das OMS-Setup, und wählen Sie im
Menü „File“ (Datei) die Menüoption „New Setup“
(Neues Setup) aus.
2
Der Dialog „OMS Driver Search“ (Suche nach
OMS-Treiber) erscheint. Deaktivieren Sie die
Kontrollkästchen „Modem“ und „Printer“
(Drucker), und klicken Sie auf [Search] (Suchen),
um nach dem Gerät zu suchen. Wenn der
Suchvorgang erfolgreich abgeschlossen wurde,
wird im Dialogfeld zur Einstellung des OMS-
Treibers das Gerät [mLAN-01] angezeigt.
3
Klicken Sie auf [OK], um nach den Ports zu
suchen. Wenn Sie das i88X oder die mLAN16E
verwenden, erscheint im Dialogfenster Port 1,
Port 2 … . Aktivieren Sie das gewünschte
Kontrollkästchen für den Port, und klicken Sie auf
[OK], um die Einstellung zu speichern.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug-in-Effekt
1
2
3
Doppelklicken Sie auf den Ordner „Mac
OS 9“. Der Ordner „VST_“ wird angezeigt.
5
Klicken Sie auf [Continue] (Fortfahren). In
dem erscheinenden Fenster können Sie den
Ordner „VstPlugins“ auswählen, in dem der
Plug-in-Effekt installiert werden soll.
Doppelklicken Sie auf den Ordner „VST_“.
„VST Plugin Installer.“ wird angezeigt.
Doppelklicken Sie auf „VST Plugin Installer“.
Ein Fenster zur Auswahl von Plug-in-Effekten
wird angezeigt.
Im Fenster erscheint im Feld „Install Location“
(Installationsort) der Zielort der
Bedienungsanleitung (PDF-Datei). Es wird
davon abgeraten, das Installationsverzeichnis
zu ändern. Wählen Sie die zu installierende
Software durch Ankreuzen aus.
4
Klicken Sie auf [Install] (Installieren). Geben
Sie in dem daraufhin angezeigten Fenster den
Benutzernamen, den Firmennamen und die
Seriennummer ein.
•
•
Falls sich auf Ihrem Computer nur ein Ordner
„VstPlugins“ befindet, ist dieser Schritt nicht nötig.
Fahren Sie mit Schritt 7fort.
Falls sich auf Ihrem Computer kein Ordner
„VstPlugins“ befindet, können Sie in dem
angezeigten Fenster den Zielort auswählen, an
dem der Plug-in-Effekt installiert werden soll.
•
Die Seriennummer finden Sie auf der
mitgelieferten Benutzerkarte.
6
7
Klicken Sie auf [OK]. Die Installation wird
gestartet.
Nach Beendigung der Installation erscheint
das folgende Fenster.
8
Klicken Sie zum Beenden der Installation auf
[Beenden]. Um das Modul an einen anderen
als den in Schritt 5 (siehe oben)
ausgewählten Ort zu kopieren, klicken Sie auf
[Continue] (Fortfahren), und wiederholen Sie
den Vorgang ab Schritt 3.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaymeldungen
Meldung
Seite
i88X (oder mLAN16E) auf dem mLAN-Netzwerk nicht gefunden.
Achten Sie darauf, dass das i88X (oder die mLAN16E) eingeschaltet ist und dass die
mLAN-Kabelverbindung richtig und sicher ist. Starten Sie dann den „mLAN Auto
Connector“ nochmals.
19, 33
Die Einstellungen des mLAN-Treibers konnten nicht verändert werden.
1) Wenn ein Programm aktiv ist, das den Treiber benutzt, schließen Sie dieses, und
ändern Sie dann erst die Einstellungen.
2) Es ist nicht genügend Arbeitsspeicher vorhanden.
24
14
Die mLAN-Einstellungen konnten nicht initialisiert werden, da die Anwendung „mLAN
Start“ nicht läuft.
Wählen Sie „ON“ (Ein) im Menü des Programms „mLAN Manager“.
Der mLAN-Audio-Ausgangsstecker des i88X (oder der mLAN16E) kann nicht mit dem 14, 19,
mLAN-Audio-Eingangsstecker des Computers verbunden werden.
33
Der mLAN-MIDI-Ausgangsstecker des i88X (oder der mLAN16E) kann nicht mit dem
mLAN-MIDI-Eingangsstecker des Computers verbunden werden.
14, 19,
33
Der mLAN-MIDI-Ausgangsstecker des Computers kann nicht mit dem mLAN-MIDI-
Eingangsstecker des i88X (oder der mLAN16E) verbunden werden.
14, 19,
33
Der mLAN-Wordclock-Ausgangsstecker des Computers kann nicht mit dem mLAN-
Wordclock-Eingangsstecker des i88X (oder der mLAN16E) verbunden werden.
14, 19,
33
Der mLAN-Wordclock-Ausgangsstecker des i88X (oder der mLAN16E) kann nicht mit 14, 19,
dem mLAN-Wordclock-Eingangsstecker des Computers verbunden werden.
33
Eine neue 1394-Schnittstellenkarte wurde gefunden.
Wenn Sie eine neue Karte eingesetzt haben, starten Sie den Computer neu.
Es ist nicht genügend Arbeitsspeicher vorhanden.
Führen Sie mLAN Stop aus, und führen Sie dann erneut mLAN Start aus. Falls dies
fehlschlägt, starten Sie den Computer neu.
14
14
14
14
14
Die 1394-Schnittstellenkarte wurde nicht gefunden.
Prüfen Sie die Karte, und starten Sie mLAN erneut.
Eines der Programme konnte nicht gestartet werden. Befolgen Sie die Anweisungen/
Meldungen der entsprechenden Anwendung. Wenn keine Meldungen angezeigt
werden, führen Sie erneut mLAN Start aus, oder starten Sie den Computer neu.
Die Anwendung reagiert nicht.
Führen Sie erneut mLAN Start aus, oder starten Sie den Computer neu.
Der mLAN-Bus-Treiber konnte nicht geladen werden.
Wenn der New Hardware Wizard nicht gestartet wurde, benutzen Sie diesen, um die
Hardware zu installieren, und führen Sie dann mLAN Start aus.
Eines oder mehrere Programme konnten nicht beendet werden.
Führen Sie mLAN Stop aus, nachdem Sie alle DAW-Programme und andere, die
mLAN benutzen, beendet haben.
14
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Fehlerbehandlung
Falls ein Problem auftritt…
Wenn Sie keinen Ton oder einen merkwürdigen Ton hören, überprüfen Sie zunächst die nachstehend
beschriebenen Punkte, und ergreifen Sie geeignete Maßnahmen. Sollte das Problem weiter bestehen,
wenden Sie sich an Ihren Yamaha-Vertragshändler.
ꢀ Die Kommunikation über mLAN ist nicht möglich.
• Wurde der Treiber installiert? ................................................................................ Siehe Seite 12.
• Ist das mLAN-Kabel richtig angeschlossen? Prüfen Sie die Verbindung; ziehen Sie das mLAN-Kabel
einmal ab, und schließen es erneut an.
• (Für Windows) Ist mLAN eingeschaltet („ON“)? Klicken Sie mit der rechten Maustaste auf das
mLAN-Manager-Symbol in der Taskleiste............................................................... Siehe Seite 14.
• (Für Windows) Wenn Sie eine neue IEEE-1394-Karte einsetzen, klicken Sie in der Taskleiste mit der
• Leuchtet die ACTIVE-LED auf der Rückseite des mLAN-Geräts (blau)? Wenn nicht, überprüfen Sie
Folgendes:
- Leuchtet die Statusanzeige im mLAN Driver Setup blau? Wenn nicht, starten Sie das mLAN16E-
mLAN Graphic Patchbay.
........... Lesen Sie hierzu Seite 19, Seite 33 und den Abschnitt „mLAN-Verbindungs-
einstellungen in der Online-Anleitung von mLAN Graphic Patchbay.
“
• Wurde die Verbindung mit mLAN Auto Connector und/oder Graphic Patchbay aktiviert?
Reaktivieren Sie die Verbindung falls nötig.
........... Lesen Sie hierzu Seite 19, Seite 33 und den Abschnitt „mLAN-Verbindungs-
einstellungen in der Online-Anleitung von mLAN Graphic Patchbay
• Haben Sie das Gerät ausgetauscht? Selbst wenn das Modell dasselbe, das Gerät aber ein anderes ist,
muss die Verbindung mithilfe von Auto Connector und/oder Graphic Patchbay reaktiviert werden
........... Lesen Sie hierzu Seite 19, Seite 33 und den Abschnitt „mLAN-Verbindungs-
einstellungen in der Online-Anleitung von mLAN Graphic Patchbay
“
.
.
“
.
• Besteht eine Ringverbindung? Prüfen Sie die Verkabelung und stellen Sie sicher, dass die Geräte
nicht „im Kreis“ angeschlossen werden.
Beispiele für Ringverbindungen
Computer
Computer
mLAN-Gerät
mLAN-Gerät
: Mit IEEE-1394-Schnittstelle
ausgerüstetes Gerät
• Möglicherweise hat die IEEE-1394-Schnittstelle Ihres Computers eine Grenze bezüglich der
gleichzeitig nutzbaren Ports. Prüfen Sie, wie viele Ports gleichzeitig benutzt werden können.
• Schalten Sie alle Geräte auf dem mLAN-Netzwerk (mit Ausnahme des Computers) aus, und
schließen Sie nacheinander die Geräte wieder an, bis dasjenige Gerät gefunden ist, welches das
Problem verursacht.
• (Für Windows) (Wenn Sie den mLAN-Bus aus der Einstellung [Hardware sicher entfernen] der
Taskleiste entfernen.) Starten Sie den Computer neu, wenn Sie mLAN wieder benutzen möchten.
• Bei Macintosh-Notebooks wie dem iBook und PowerBook müssen Sie immer zuerst das mLAN-
Gerät und das mLAN-Kabel anschließen und dann das mLAN-Gerät einschalten, bevor Sie den
Computer starten.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
40
Download from Www.Somanuals.com. All Manuals Search And Download.
• Denken Sie daran, die Wordclock richtig einzurichten. Achten Sie auch darauf, dass ein Knoten
als Master und die anderen als Slaves definiert sind.
............Lesen Sie hierzu den Abschnitt „mLAN-Verbindungseinstellungen
Online-Anleitung von mLAN Graphic Patchbay
“
in der
.
ꢀ Die Verarbeitungsgeschwindigkeit des Computers ist zu langsam.
ꢀ Das CPU-Meter des Computers zeigt eine hohe Verarbeitungslast an.
ꢀ Die Wiedergabe erfolgt verzögert.
• Wenn an das Netzwerk mehrere S200-kompatible Geräte angeschlossen sind, kann das
Anschließen von mLAN-Geräten in mLAN Graphic Patchbay mehr Zeit erfordern.
ꢀ Inkonsistenz in der Wordclock, oder Beenden des Auto Connector nicht
möglich.
• (Für Windows) Mobile Computer mit Intel-CPU
Die SpeedStep™-Technik wird für einige CPUs angewendet (CPUs für Notebooks). Bitte
deaktivieren Sie die SpeedStep™-Technik, wenn mLAN benutzt wird. Die SpeedStep™-Technik
ändert die CPU-Clock dynamisch abhängig von der CPU-Last, um den Stromverbrauch zu senken.
- So deaktivieren Sie die SpeedStep™-Technik: In fast allen PCs gibt es eine Einstellung im
BIOS, mit der die SpeedStep™-Technik ein- und ausgeschaltet werden kann. Bitte lesen Sie
hierzu die Bedienungsanleitung Ihres Computers, oder fragen Sie beim Hersteller nach.
ꢀ Die mLAN-Einstellungen können nicht geändert werden.
• (Für Windows) Ist der mLAN- (WDM-) Treiber als das standardmäßige Audiogerät für das System
ausgewählt?
- Wählen Sie [Start | Systemsteuerung | Sounds und Audiogeräte | Voice].
Vergewissern Sie sich, dass unter „Stimmenwiedergabe“ und „Stimmenaufnahme“ nicht
„mLAN Audio 01“ ausgewählt ist.
- Wählen Sie [Start | Systemsteuerung | Sounds und Audiogeräte | Audio].
Vergewissern Sie sich, dass unter „Soundwiedergabe“ und „Soundaufnahme“ nicht „mLAN
Audio 01“ ausgewählt ist.
- Wählen Sie unter „MIDI-Musikwiedergabe“ eine andere Option als die Optionen im Bereich
von „mLAN MIDI Out“ bis „mLAN MIDI Out (8)“.
• (Für Windows) Wählen Sie [Start | Systemsteuerung | Sounds und Audiogeräte | Sounds]. Wählen
Sie außerdem als „Soundschema“ die Option „Keine Sounds“, und führen Sie den Vorgang
dann erneut aus.
• Wenn Sie mLAN nicht schließen können (indem Sie in der Taskleiste mit der rechten Maustaste
auf das Symbol für mLAN Manager klicken und anschließend „OFF“ (Aus) auswählen), beenden
Sie die unten aufgeführten Anwendungen manuell. ([Strg] + [Alt] + [Entf] ¡ „Anwendung
schließen“ ¡ Task auswählen ¡ [Task beenden]). Starten Sie nach dem Beenden der
Anwendungen mLAN Manager, um die mLAN-Einstellungen wieder zu ändern.
- mLANVDevice.exe
- mLANTFamily.exe
- mLANSoftPH.exe
- mLANManager.exe
• Um mLAN-Einstellungen zu ändern, wählen Sie [Start | (Alle) Programme | Autostart], und
starten Sie dann mLAN Manager.
• (Wenn bei der Deinstallation eine Meldung wie „Datei wurde nicht gefunden“ erscheint:)
Führen Sie erneut eine Installation aus, und versuchen Sie nochmals die Deinstallation.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ (Windows) Der mLAN Manager (das mLAN-Symbol in der Taskleiste) ist
verschwunden.
• Wählen Sie [Start | (Alle) Programme | Autostart (oder mLAN Tools)], und wählen Sie dann
mLAN Manager.
ꢀ Ein angeschlossenes mLAN-Gerät wird nicht erkannt.
• Aktualisieren Sie die Informationen, indem Sie in der Menüleiste die Option [View] und danach
[Update] wählen. Sollte das Gerät immer noch nicht erkannt werden, schalten Sie mLAN
Manager und wieder ein, und wählen Sie dann [Update], um die neuesten Informationen zu
erhalten.
........... Lesen Sie hierzu den Abschnitt „Starten von mLAN Graphic Patchbay“ in
der Online-Anleitung von mLAN Graphic Patchbay.
ꢀ Das Starten von mLAN Graphic Patchbay oder Aktualisieren auf die
neuesten Informationen dauert einen Moment.
• Wenn Sie versuchen, die Netzwerkinformationen zu aktualisieren, nachdem Sie ein mLAN-Gerät
angeschlossen oder abgetrennt haben, das S400 nicht unterstützt, passt das System die mLAN-
Übertragungsgeschwindigkeit an und benötigt mehr Zeit, um Ihren Befehl zu verarbeiten. Auf
spätere Vorgänge hat dies jedoch keine Auswirkungen.
• Wenn an ein Netzwerk fünf oder mehr mLAN-Geräte (einschließlich eines Computers)
angeschlossen wurden, ist die Gesamtzahl der Übertragungskanäle aller Geräte begrenzt. Sie
können bis zu 86 Kanäle unter Windows und bis zu 98 Kanäle in einem Macintosh-System
anschließen.
•
Informationen zu Audioproblemen wie z.B. kein Ton oder störende Geräusche finden Sie im Abschnitt
„Fehlerbehandlung“ der Bedienungsanleitung des i88X bzw. der mLAN16E.
TOOLS for i88X/mLAN16E, Plug-in Effect – Installationsanleitung
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Table des matières
Installation des logiciels..........................................................................8
Installation de l'effet plug-in (pour les utilisateurs de i88X)...................25
Pour les utilisateurs de Macintosh................................................27
Contenu du CD-ROM ...........................................................................27
Configuration requise pour le logiciel i88X/mLAN16E..........................29
Installation des logiciels........................................................................30
Connexion d'un ordinateur à un périphérique mLAN via mLAN...........33
Plug-in Effect ........................................................................................38
Messages de l'afficheur..................................................................39
Dépistage des pannes ....................................................................40
Pour les utilisateurs de Windows :
• Lors de l'installation, attendez que l'ordinateur affiche le message suivant pour mettre les
périphériques mLAN sous tension.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Système d'exploitation
Les applications de ce CD-ROM sont proposées dans des versions compatibles avec les systèmes
d'exploitation Windows et Macintosh. La procédure d'installation et les applications elles-mêmes
diffèrent en fonction du système d'exploitation que vous utilisez. Veuillez vous reporter aux instructions
d'installation correspondantes.
Pour Windows, reportez-vous à la page 5~25.
Pour Macintosh, reportez-vous à la page 27.
Procédure d'installation du CD-ROM
Avant d'ouvrir l'emballage scellé du logiciel, lisez attentivement l'accord de licence du logiciel repris à
la fin de ce manuel.
1
2
Utilisateurs de i88X : Inscrivez votre produit.
Pour toute opération ultérieure, reportez-vous au
mode d'emploi des différents logiciels (aide en
Installez le logiciel (Studio Manager, etc.).
Windows : page 6, Macintosh : page 30
3
Installez le pilote approprié sur votre
ordinateur et effectuez les réglages
nécessaires.
•
Pour pouvoir visualiser des fichiers PDF, vous devez
préalablement installer Acrobat Reader sur votre
ordinateur (Windows : page 8, Macintosh : page 30).
Windows : page 9, Macintosh : page 30
La plupart des exemples d'écran proposés
dans ce manuel sont issus de la version
anglaise du système d'exploitation/logiciel.
4
5
Utilisateurs de i88X : Installez Plug-in Effect
(Logiciel d'effets plug-in).
Windows : page 5, Macintosh : page 27
Démarrez le logiciel.
Solutions rapides/matériel de référence
• Réglage de la fréquence d'échantillonnage........................................................ page 19, 33
• Détermination du nombre de canaux audio mLAN.............................................. page 19, 33
• Modification des réglages du pilote mLAN.......................................................... page 15, 32
• Détermination de la latence ....................................................................................... page 15
• Comment supprimer ou réinstaller le pilote ?................................................. pages 8, 24, 32
• Connexion de plusieurs périphériques mLAN ..................................................... page 19, 33
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Pour les utilisateurs de Windows
Contenu du CD-ROM
Les logiciels pour Windows sont compris sur deux CD-ROM (pour la carte mLAN16E seul TOOLS for
i88X/mLAN16E est inclus). Installez tout d'abord TOOLS for i88X/mLAN16E (Outils pour i88x/
mLAN16E).
G TOOLS for i88X/mLAN16E
Nom du
dossier
Nom de
l'application
Contenu
Vous permet de visualiser les manuels PDF des différentes applications.
• Ouvrez l'aide en ligne en appuyant sur la touche [F1] de l'ordinateur.
*1 *2
Acroread_
Acrobat Reader
Ce logiciel comprend les pilotes mLAN et les applications nécessaires
pour effectuer des connexions mLAN entre les périphériques mLAN et
l'ordinateur. Installez le logiciel lorsque les périphériques mLAN sont
hors tension (page 9). Une procédure d'installation unique installe toutes
les applications nécessaires aux communications mLAN. Parmi les
logiciels à installer, mLAN Auto Connector et mLAN Graphic Patchbay,
qui permettent de configurer les connexions audio et MIDI d'un réseau
mLAN.
mLAN Applications
for YAMAHA
mLAN Tools
mLAN_
G Plug-in Effect (inclus avec le i88X)
• Ce logiciel peut être utilisé en tant qu'application plug-in dans un programme compatible VST.
• Pour appeler le manuel PDF de chaque programme, sélectionnez [Démarrer] ➝ [Tous les programmes]
➝ [YAMAHA VST Plugins] ➝ (le logiciel approprié) ➝ [Online Manual] (Manuel en ligne).
• Pour obtenir des instructions sur l'installation de Plug-in Effects, reportez-vous à la page 25.
Nom du
dossier
Nom de
l'application
Contenu
Ce logiciel reproduit les effets d'égaliseur et de dynamique intégrés
dans chacun des canaux du YAMAHA Digital Mixing Studio 01X et utilise
la puissance de traitement de l'ordinateur pour produire les effets.
Vous pouvez utiliser les fonctions de dynamiques et de l'égaliseur à
quatre bandes (également disponibles sur les consoles de mixage
numérique Yamaha Digital Mixing) comme logiciel d'effets. Vous pouvez
également importer les réglages du 01X et ainsi reproduire les
morceaux créés sur le 01X.
01X Channel
Module
*1
Ce programme est utilisé pour modifier la hauteur de ton des voix
enregistrées. Plus qu'un simple processeur de hauteur de ton, il vous
permet également de modifier le caractère des voix. Vous pouvez en
outre utiliser des données MIDI sur l'application hôte pour contrôler
l'effet Pitch Fix (Fixation de la hauteur de ton). Pour plus d'informations
sur la configuration avec l'application hôte, reportez-vous au mode
d'emploi du Pitch Fix au format PDF.
*1
VST_
Pitch Fix
Programme à effets multiples utilisé pour le traitement des voix. Le plug-
in propose différents effets, dont un filtre passe-haut, un compresseur et
un égaliseur à trois bandes.
*1
Vocal Rack
Programme à effets multiples utilisé à des fins de mastérisation. Il
comprend un processeur, un limiteur et une fonction d'écrêtage léger et
vous permet de diviser le signal en trois bandes afin de procéder à un
traitement multi-bandes distinct.
*1
Final Master
*1 Ces applications sont fournies avec des manuels PDF/en ligne.
*2 Malheureusement, Yamaha ne peut garantir la stabilité de ces programmes, de même qu'il ne peut
proposer d'assistance utilisateur pour ceux-ci.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I A propos de l'OPT (Open Plug-in Technology)
Vous pouvez lancer mLAN Graphic Patchbay en tant que logiciel autonome ou que plug-in pour toute
application compatible avec l'Open Plug-in Technology (OPT).
L'OPT est un nouveau format de logiciel qui vous permet de contrôler les périphériques MIDI à partir d'un
séquenceur de logiciels de musique. L'OPT vous permet, par exemple, de démarrer et de contrôler
différents éléments de votre système musical, tels que les éditeurs de carte plug-in et les éditeurs de
commande de mixage, directement à partir d'un séquenceur compatible OPT. Par ailleurs, il n'est plus
nécessaire de configurer les pilotes MIDI pour chaque application, ce qui simplifie votre système de
production de musique et rend les opérations plus simples et plus sûres.
A propos des niveaux OPT
La compatibilité de l'application cliente avec l'OPT comprend trois niveaux différents, comme
indiqué ci-dessous.
Le niveau 1 (OPT Panels) offre un support de base pour l'ouverture et l'affichage des panneaux de commandes
OPT qui peuvent transmettre des données via les connecteurs MIDI externes d'un client.
En général, ce niveau permet aux panneaux de commandes de l'éditeur de matériel de base de fonctionner
correctement.
Le niveau 2 (OPT Processors) offre un support aux processeurs MIDI et à l'automatisation du panneau en temps
réel. En général, ce niveau permet aux effets MIDI en temps réel et hors ligne (arpégiateurs, transposeurs, etc.)
de fonctionner correctement et d'automatiser le fonctionnement d'OPT Panels.
Le niveau 3 (OPT Views) offre un support qui vous permet d'éditer les vues et les processeurs et panneaux MIDI
qui exigent un accès direct aux structures de stockage du séquenceur client.
En général, ce niveau permet de gérer des vues d'édition MIDI avancées (éditeurs de listes, accompagnement
automatique, contrôleurs de données, etc.).
Implémentation du niveau de l'OPT pour mLAN Graphic Patchbay
Ce tableau indique la compatibilité de mLAN Graphic Patchbay avec l'OPT.
Opération de mLAN Graphic Patchbay
Niveaux de l'OPT de l'application cliente
Support des opérations
Limites aux opérations
VIEWS (Niveau 3)
Oui
Aucune
PROCESSORS (Niveau 2)
Oui
Aucune
Aucune
Oui (avec certaines
limitations)
PANELS (Niveau 1)
Toutes les fonctions de mLAN Graphic Patchbay fonctionnent sous les applications clientes de tout
niveau OPT (Panels (Niveau 1), Processors (Niveau 2) et Views (Niveau 3)).
•
Il arrive que certaines opérations ne fonctionnent pas correctement lorsqu'il n'y a pas de fonction correspondante dans
l'application cliente (séquenceur, etc.). Le niveau d'implémentation le plus haut de l'application cliente apparaît dans le
logo OPT (qui s'affiche en même temps que les informations relatives à la version de l'application).
Configuration requise pour le logiciel i88X/mLAN16E
La configuration système spécifiée ci-dessous est requise pour pouvoir utiliser les logiciels fournis.
•
•
La configuration système présentée ci-dessous peut différer légèrement en fonction du système d'exploitation utilisé.
La configuration requise pour les logiciels fournis et non répertoriés ci-après est susceptible de différer. Pour plus de
détails, reportez-vous au manuel en ligne ou à la documentation qui accompagne le logiciel en question.
•
Pour plus de détails sur la configuration minimale requise pour chaque logiciel DAW (station de travail audionumérique),
reportez-vous aux modes d'emploi correspondants.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration système recommandée (Connexion
d'un périphérique mLAN unique à un ordinateur,
d'homologue à homologue)
G i88X/mLAN16E (mLAN Tools 2.0/mLAN
Applications for Yamaha)
La configuration système totale, qui inclut le
séquenceur audio, le logiciel mLAN et les
effets plug-in, est la suivante.
Fs=44,1 kHz/24 bits
Audio Driver 18In/18Out (i88X), 16 In/
8 Out (mLAN16E)
MIDI Driver 1In/1Out (i88X), 3 In/3 Out
(mLAN16E)
Système
: XP Edition Professionnelle/
d'exploitation XP Edition Familiale
Ordinateur : processeur de la famille Intel
Pentium ou Celeron, avec borne
IEEE1394 S400 (400 Mbps)
16 pistes de reproduction MIDI et
12 pistes de reproduction audio
2 pistes d'enregistrement audio
2 effets d'envoi Soft Effect plug-in
10 effets d'insertion Soft Effect plug-in
2 canaux pour Soft Synthesizer plug-in
Temps d'attente inférieur ou égal à
5 msec
(FireWire) ou i.Link (*1).
Disque dur : 250 Mo (i88X) ou 50 Mo (mLAN16E)
d'espace disque disponible
minimum ; disque dur haute
vitesse (*2)
Configuration système recommandée (Connexion
d'un ordinateur et trois périphérique mLAN)
G Système recommandé (*3)
• Connexion d'un périphérique mLAN unique
à un ordinateur d'homologue à homologue :
Fs=44,1 kHz/24 bits
Audio Driver 32In/32Out (total)
MIDI Driver 4In/5Out (total)
Ordinateur
: 2,2 GHz minimum,
processeur Intel
Pentium 4
16 pistes de reproduction MIDI et 8
pistes de reproduction audio
2 pistes d'enregistrement audio
2 effets d'envoi Soft Effect plug-in
10 effets d'insertion Soft Effect plug-in
2 canaux pour Soft Synthesizer plug-in
Temps d'attente inférieur ou égal à
5 msec
Mémoire disponible : 512 Mo ou plus
•
Connexion d'un ordinateur et de trois
périphériques mLAN dans un réseau mLAN :
Ordinateur
: 2,6 GHz minimum,
processeur Intel
Pentium 4
Mémoire disponible : 512 Mo ou plus
Configuration minimale requise
G Configuration minimale requise (*3)
Fs=44,1 kHz/16 bits
Audio Driver 8In/2Out (i88X), 2In/
2Out(mLAN16E)
MIDI Driver 1In/1Out (i88X), 2In/2Out
(mLAN16E)
Ordinateur
:
Intel Pentium 1,2 GHz
ou Intel Celeron
1,7 GHz (ou supérieur)
Mémoire disponible : 384 Mo ou plus
16 pistes de reproduction MIDI et
12 pistes de reproduction audio
2 effets d'envoi Soft Effect plug-in
6 effets d'insertion Soft Effect plug-in
Pas de Soft Synthesizer plug-in
Temps d'attente d'environ 50 msec
*1 L'ordinateur doit être équipé d'une borne
IEEE 1394 (FireWire) ou i.Link. En l'absence
de borne, installez une carte d'interface IEEE
1394 (PCI ou PC).
Pour plus de détails sur la configuration
système et les cartes PCI ou PC
recommandées, consultez le site
http://www.yamahasynth.com
•
•
Vous pouvez utiliser deux cartes PCI ou PC
maximum. Cependant, vous ne pouvez vous servir
que d'une seule carte à la fois.
Si vous utilisez une interface IEEE1394 intégrée à
l'ordinateur, vous ne pouvez utiliser qu'une seule
carte d'interface IEEE1394 PCI ou PC en même
temps.
Si vous vous servez d'un ordinateur portable, il se
peut qu'aucune borne IEEE 1394 intégrée ne soit
disponible. Dans ce cas, installez une carte
d'interface PC appropriée.
*2 Acrobat Reader n'est pas inclus.
*3 La configuration système décrite ici
s'applique lorsque vous utilisez le logiciel
fourni et lorsque vous reproduisez les
données audio/MIDI détaillées ci-dessous sur
un logiciel de séquençage standard. Elle peut
néanmoins varier en fonction du logiciel de
séquençage utilisé.
G Effet plug-in (inclus uniquement avec le i88X)
Système d'exploitation: XP Edition Professionnelle/XP Edition Familiale/2000/Me/n98SE/98
Pour utiliser le périphérique mLAN, il faut l'activer chaque fois que vous démarrez l'ordinateur à l'aide
de l'icône mLAN (mLAN Manager) dans la barre de tâches (page 14).
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation des logiciels
Pour obtenir des instructions sur l'installation des logiciels autres que celui décrit ci-dessous, reportez-
vous à la page page 5 de la section « Contenu du CD-ROM ».
Désinstallation (suppression de l'application installée)
Vous pouvez supprimer le logiciel installé. Pour ce faire, sélectionnez [Démarrer] (➝ [Paramètres]) ➝
[Panneau de configuration] ➝ [Ajout/Suppression de programmes] ➝ [Installer/Désinstaller], puis
choisissez l'application à supprimer et cliquez sur [Ajouter/Supprimer...]. Suivez les instructions qui
apparaissent à l'écran pour désinstaller le logiciel.
•
•
Les noms des boutons ou des menus peuvent différer légèrement selon le système d'exploitation de votre
ordinateur.
Pour pouvoir désinstaller le logiciel mLAN, vous devez supprimer les deux éléments suivants dans l'ordre, à savoir 1
et puis 2.
1. mLAN Applications for YAMAHA
2. mLAN Tools 2.0
Pour obtenir des instructions sur la désinstallation de l'effet plug-in, reportez-vous à la page 26.
Vérifiez préalablement le nom du lecteur (D:, E:, etc.) correspondant au CD-ROM que vous utilisez. Ce
nom est affiché sous l'icône du CD-ROM dans [Poste de travail]. (Le répertoire racine du lecteur de
CD-ROM est, par exemple, D:\, E:\, etc.)
Acrobat Reader
Pour pouvoir visualiser les manuels électroniques (PDF) fournis avec chaque application, vous devez
installer Acrobat Reader.
•
Si une version plus ancienne d'Acrobat Reader est installée sur votre ordinateur, vous devez d'abord la désinstaller
avant de poursuivre.
1
2
Double-cliquez sur le dossier « Acroread_ ».
Quatre dossiers correspondant aux
différentes langues disponibles s'affichent.
4
Procédez à l'installation en suivant les
instructions qui apparaissent à l'écran.
Une fois l'installation terminée, le dossier
Acrobat apparaît sur votre ordinateur (par
défaut, dans Program Files). Pour plus
d'informations sur l'utilisation d'Acrobat
Reader, reportez-vous au Reader Guide dans
le menu Help.
Sélectionnez la langue que vous souhaitez
utiliser et double-cliquez sur son dossier. Le
fichier « arxxx***.exe » apparaît. (« xxx »
représentent des chiffres et « *** » la langue
sélectionnée.)
•
Les fichiers avec l'extension « .exe » peuvent
porter un nom différent de celui spécifié ici.
3
Double-cliquez sur « arxxx***.exe ».
La boîte de dialogue d'installation d'Acrobat
Reader s'affiche.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
8
Download from Www.Somanuals.com. All Manuals Search And Download.
mLAN Tools 2.0 et mLAN Applications for YAMAHA
Le logiciel mLAN Tools 2.0 comprend un pilote qui vous permet de connecter des périphériques mLAN
à un ordinateur.
Le logiciel mLAN Applications for YAMAHA permet le transfert des signaux audio et MIDI entre un
ordinateur et des périphériques mLAN via des câbles mLAN.
Il vous permet de connecter le i88X, la carte mLAN16E ou le 01X à un ordinateur via mLAN. Les
utilisateurs 01X doivent uninstaller l'ancienne version du logiciel mLAN avant d'installer ce logiciel.
(Reportez-vous au Manuel d'installation du 01X.)
Suivez les étapes ci-dessous pour installer ces applications logicielles.
•
Pour obtenir des explications sur les messages d'erreur, reportez-vous à la page 39.
Préparation de l'installation
1
2
Débranchez tous les câbles MIDI qui relient
les périphériques MIDI aux connecteurs MIDI
IN/OUT du périphérique mLAN.
5
Sélectionnez [Démarrer] ➝ [Panneau de
configuration]. Si le panneau de configuration
s'affiche comme illustré ci-dessous, cliquez
sur « Basculer vers l'affichage classique »
dans le coin supérieur gauche de la fenêtre
pour afficher tous les panneaux de
A l'aide d'un câble IEEE 1394 (FireWire/iLink),
connectez le périphérique mLAN directement
à l'ordinateur (sans utiliser de concentrateur)
et débranchez tous les autres périphériques
connectés via la borne IEEE 1394 de
l'ordinateur.
configuration et les icônes.
3
4
Vérifiez que le périphérique mLAN est hors
tension.
Démarrez l'ordinateur et ouvrez la session
Administrateur.
Passez à l'étape suivante.
•
Si vous utilisez le taux de transfert de données
S200 (vérifiez sur le panneau arrière de votre
périphérique ou reportez-vous aux
caractéristiques techniques du mode d'emploi),
veillez à désinstaller préalablement l'ancienne
version de mLAN Tools. Pour plus d'informations
sur la désinstallation du logiciel, reportez-vous
au mode d'emploi du périphérique
correspondant.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Sélectionnez [Système] ➝ [Matériel] ➝ [Signature du pilote] ➝ [Vérification des signatures de fichiers]
et cochez la case d'option à gauche de « Ignorer : installe tous les fichiers, quelles que soient leurs
signatures » et cliquez sur [OK].
•
Au terme de l'installation, veillez à restaurer la configuration d'origine si nécessaire.
7
Vérifiez qu'aucun symbole « ! » ou « x » n'apparaît à côté de « Contrôleur de bus IEEE 1394 » (dans
[Système] ➝ [Matériel] ➝ [Gestionnaire de périphériques]). Si l'un de ces symboles apparaît, la
connexion mLAN (IEEE 1394/i.Link) ne peut pas être utilisée. Pour plus de détails, reportez-vous au
mode d'emploi de votre ordinateur.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Cliquez sur [OK] pour fermer la fenêtre
Propriétés système, puis sur le bouton Fermer
([X]) dans le coin supérieur droit de la fenêtre
pour fermer le Panneau de configuration.
Installation de mLAN Tools
14
15
Cliquez sur [Suivant]. L'écran d'installation
de mLAN Tools apparaît.
Sortez des applications ouvertes et fermez
toutes les fenêtres actives.
Cliquez sur [Suivant]. La fenêtre
« Répertoire de destination », dans laquelle
vous pouvez spécifier le lecteur et le nom
du dossier dans lesquels installer mLAN
Tools, apparaît. Le répertoire de destination
est automatiquement défini. Cependant, si
vous souhaitez le modifier, cliquez sur le
bouton [Parcourir] et sélectionnez le
dossier de votre choix (lecteur:\nom du
dossier). Cliquez sur [Suivant] après avoir
effectué ou confirmé la sélection.
10
Insérez le CD-ROM inclus dans le lecteur
de CD-ROM.
Démarrage du programme
d'installation du logiciel mLAN
Le programme d'installation installe les deux
programmes suivants sur votre ordinateur.
• mLAN Tools 2.0
• mLAN Application for YAMAHA
•
En général, il n'est pas nécessaire de modifier le
répertoire de destination.
•
Utilisez le bouton Annuler ou Fermer pour quitter
l'installation. Sortir à l'aide des touches
[CTRL]+[ALT]+[SUPPR.] ou en mettant l'appareil hors
tension pendant la procédure d'installation risque
d'engendrer des problèmes dans la mesure où
l'installation est interrompue sans que la
16
Confirmez le lecteur et le nom du dossier,
puis cliquez sur [Suivant] pour démarrer
l'installation.
•
Pour annuler l'installation, cliquez sur [Cancel]
(Annuler).
désinstallation ait été effectuée de manière correcte.
11
Double-cliquez sur le dossier « mLAN_ ».
Différents fichiers s'affichent, dont «
Setup.exe ».
17
Au terme de l'installation, le message
« Terminé » apparaît à l'écran. Cliquez sur
[Terminer].
12
13
Double-cliquez sur « Setup.exe ».
Passez à l’étape suivante.
Une série de messages de confirmation
apparaissent. S'il n'y a pas de problèmes,
cliquez sur [OK] en réponse à chaque
message. Lorsque vous avez terminé, un
écran « Bienvenue » apparaît.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation de mLAN Applications
forYAMAHA (logiciel mLAN)
Réglages initiaux du pilote mLAN
Après avoir redémarré l'ordinateur, effectuez les
réglages initiaux du pilote mLAN. Sélectionnez
[ON] dans mLAN Manager pour activer le
pilote mLAN (page 14).
Une fois l'installation de mLAN Tools 2.0
terminée, l'ordinateur affiche
automatiquement une fenêtre qui vous
permet de lancer l'installation d'Applications
for YAMAHA.
21
Une boîte de dialogue vous invite mettre le
périphérique mLAN sous tension.
Cliquez sur [Suivant].
Connectez le périphérique mLAN à
l'ordinateur et mettez ensuite le i88X et le
mLAN16E (ou 01X) sous tension.
18
Déterminez le lecteur de destination et le
nom du dossier souhaités dans la fenêtre
« Répertoire de destination ». Le répertoire
de destination est automatiquement défini.
Cependant, si vous souhaitez le modifier,
cliquez sur le bouton [Parcourir] et
22
Installation du périphérique mLAN
La fenêtre « Assistant Nouveau matériel
détecté » s'affiche.
Cochez la case d'option en regard de
« Installer le logiciel automatiquement
(recommandé) » et cliquez sur [Suivant]
pour démarrer l'installation.
sélectionnez le dossier de votre choix
(lecteur:\nom du dossier).
•
Pour annuler l'installation, cliquez sur [Cancel]
(Annuler).
19
20
Confirmez le lecteur et le nom du dossier,
puis cliquez sur [Suivant] pour démarrer
l'installation.
•
Pour annuler l'installation, cliquez sur [Cancel]
(Annuler).
Une fois le processus d'installation terminé,
un message vous invite à redémarrer
l'ordinateur. Cliquez sur [Suivant].
En cas d'annulation de
l'installation
Si vous interrompez une procédure
d'installation avant la fin, il est possible que le
logiciel ne soit pas installé correctement.
Veuillez suivre les instructions ci-dessous pour
installer correctement le logiciel.
23
Une fois l'installation du périphérique mLAN
connecté terminée, cliquez sur [OK] dans la
boîte de dialogue qui s'affiche à l'étape 21.
1
Cliquez sur « Ajout/suppression de
programmes » dans le Panneau de
configuration (page 8) et recherchez
« mLAN Applications for YAMAHA » et
« mLAN Tools 2.0 » dans la liste.
2
Supprimez ces deux programmes dans
l'ordre suivant : d'abord « mLAN
Applications for YAMAHA », puis « mLAN
Tools 2.0 ».
3
Relancez l'installation à partir de l'étape 12
(page 11).
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
12
Download from Www.Somanuals.com. All Manuals Search And Download.
24
La boîte de dialogue permettant d'effectuer
les réglages initiaux du pilote s'affiche.
Cliquez sur [OK].
Réglages initiaux du port MIDI
mLAN
28
L'ordinateur affiche automatiquement
l'Assistant Nouveau matériel détecté.
Cochez la case d'option en regard de
« Installer le logiciel automatiquement
(recommandé) » et cliquez sur [Suivant].
•
Au cours des étapes 25 et 26, et des étapes 28
et 29, l'ordinateur affiche une fenêtre indiquant
que effectuez à présent les paramètres initiaux
de chaque pilote. Cette fenêtre indique
également le nombre de fois que l'Assistant
Nouveau matériel détecté s'affichera au cours de
la procédure. A moins que vous ne souhaitiez
annuler l'installation, ne fermez pas cette fenêtre.
Exemple :
Réglages initiaux du réseau mLAN
29
30
Une fois l'installation terminée, l'ordinateur
affiche un message vous indiquant la fin de
la procédure. Cliquez sur [Terminer].
25
L'ordinateur affiche automatiquement
l'Assistant Nouveau matériel détecté.
Cochez la case d'option en regard de
« Installer le logiciel automatiquement
(recommandé) » et cliquez sur [Suivant].
Répétez les étapes 28 et 29 jusqu'à ce
que la fenêtre (indiquant que vous
effectuez les réglages initiaux du pilote
mLAN Stream) se ferme.
31
L'ordinateur affiche un message indiquant
que les réglages initiaux du pilote mLAN
sont terminés. Cliquez sur [OK].
Pour utiliser un séquenceur audio via
mLAN, vous devez connecter l'ordinateur
au périphérique mLAN à l'aide du
connecteur audio mLAN ou de Graphic
Patchbay (page 19).
26
27
Une fois l'installation terminée, l'ordinateur
affiche un message vous indiquant la fin de
la procédure. Cliquez sur [Terminer].
Répétez les étapes 25 et 26 jusqu'à ce
que la fenêtre (indiquant que vous
effectuez les réglages initiaux du pilote
mLAN Bus) se ferme.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirmation de l'installation
•
•
Pour utiliser les connexions mLAN, après avoir
démarré l'ordinateur, cliquez avec le bouton droit sur
l'icône mLAN (mLAN Manager) dans la barre des
tâches, puis sélectionnez [ON] pour activer les
connexions mLAN.
Barre de tâches (mLAN Manager)
Si l'installation réussit, une icône mLAN
(mLAN Manager) apparaît dans la barre de
tâches. Pour appeler le menu, cliquez avec le
bouton droit de la souris sur l'icône.
Vous pouvez utiliser le mLAN Driver Setup (page 15)
pour vérifier si les données sont correctement
transmises et reçues via le bus mLAN.
Lorsque vous utilisez le mLAN, cliquez
avec le bouton droit sur l'icône mLAN
(mLAN Manager) dans la barre de tâches
et sélectionnez « ON » (Activer) (pour
démarrer le mLAN).
Lors du démarrage du mLAN
Le message suivant apparaît lorsque vous
démarrez le mLAN.
Pour annuler le démarrage du mLAN, cliquez
sur [Cancel] (Annuler) dans la fenêtre mLAN
bouton droit sur l'icône mLAN (mLAN
[ON].
ON ................... Active le mLAN pour le
transfert de données (exécution
de l'application « mLAN
Start »).
OFF ................. Désactive le mLAN (exécution
de l'application « mLAN
Gestionnaire de périphériques (Système
d'exploitation)
Stop »). Vous pouvez alléger la
charge de l'unité centrale en
n'utilisant pas le mLAN.
1
2
3
4
Sélectionnez [Panneau de configuration] dans
le menu Démarrer.
Driver Setup ... Démarre mLAN Driver Setup
(page 15).
Auto Connector ........Démarre mLAN Auto
Connector (page 19).
Graphic Patchbay ....Démarre mLAN Graphic
Patchbay. Pour plus
Double-cliquez sur l'icône Système pour
ouvrir la fenêtre Propriétés système.
Sélectionnez l'onglet Matériel et cliquez sur
[Gestionnaire de périphériques].
d'informations, reportez-
vous au manuel en ligne
de mLAN Graphic
Patchbay.
Cliquez sur le signe [+] en regard de
« Contrôleurs son, vidéo et jeu » et vérifiez
que « YAMAHA i88X » ou « YAMAHA
mLAN16E » et « YAMAHA mLanBus »
apparaissent dans la liste.
EXIT ................Supprime l'icône mLAN de la
barre de tâches tout en
conservant l'état ON/OFF
actuel du mLAN. Pour l'afficher
à nouveau, sélectionnez
[Démarrer] ➝ [(Tous les)
Programmes] ➝ [Démarrage]
➝ [mLAN Manager].
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Modification des paramètres après l'installation
Vous pouvez modifier les paramètres du mLAN après l'installation depuis la fenêtre mLAN Driver Setup.
mLAN Driver Setup
(Cliquez avec le bouton droit sur l'icône mLAN dans la barre de tâches ➝ Driver Setup)
Cette fenêtre vous permet de vérifier et de modifier les paramètres de réception/transmission des
données mLAN. Veillez à fermer toutes les applications (DAW, etc.) qui utilisent la connexion mLAN
avant d'apporter des modifications.
•
Pour modifier l'horloge (taux d'échantillonnage) et le nombre de canaux utilisés, cliquez avec le bouton droit sur
l'icône mLAN dans la barre de tâches et lancez mLAN Auto Connector et Graphic Patchbay.
q
w
e
t
r
y
q 1394 Adapter Card ID (ID carte adaptateur 1394)
Cette option affiche l'ID de la carte d'interface IEEE 1394 (FireWire/iLink) installée sur l'ordinateur.
Lorsque plusieurs cartes sont installées, vous pouvez utiliser cette option pour sélectionner la carte
voulue. Les cartes non reconnues par le pilote mLAN ne sont pas affichées.
•
Il est possible que le nom du fabricant ou du fournisseur ne s'affiche pas correctement, selon la carte que vous utilisez.
w Latency (Latence)
Détermine la latence de base des communications mLAN ou la rapidité de traitement des données après
émission d'une commande. Choisissez une option appropriée à votre environnement.
A propos de la latence dans un réseau mLAN
La configuration de l'ordinateur (vitesse de traitement, taille de la mémoire système, etc.) est
susceptible d'affecter sa capacité à enregistrer et reproduire correctement des données audio dans
votre séquenceur audio, avec pour conséquence l'apparition de bruits ou d'autres problèmes audio.
Dans la plupart des cas, vous pouvez résoudre le problème en ajustant la latence (temps de retard).
• Une valeur de latence peu élevée se traduit par un bref temps de retard et offre une réponse
optimale en cas d'enregistrement/reproduction en temps réel.
• Une valeur de latence élevée se traduit par un long temps de retard, mais permet d'utiliser un plus
grand nombre de canaux audio et d'effets plug-in.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
15
Download from Www.Somanuals.com. All Manuals Search And Download.
G Types de latence au sein d'un réseau mLAN
Latence audio (msec)
La latence audio est déterminée par la latence de base (sélectionnée dans la fenêtre mLAN Driver
Setup) et le paramètre Preferred Buffer Size (Taille préférée du tampon) (spécifié dans le panneau de
configuration de ASIO mLAN) (voir ci-dessous).
Latence MIDI (msec)
La valeur de latence MIDI varie en fonction de la version du pilote mLAN.
Pour plus d'informations sur la latence MIDI de votre version du pilote mLAN, reportez-vous au fichier
« MIDI_Latency.txt ».
Windows: Sélectionnez [Program files | mLAN Tools | YAMAHA | MIDI_Latency.txt].
Macintosh: Localisez le dossier « mLAN Tools », puis double-cliquez sur le dossier « YAMAHA »,
« Manual », puis sur « MIDI_Latency.txt »
G Panneau de configuration de ASIO mLAN
Lorsque vous lancez le panneau de configuration ASIO mLAN, le système affiche la boîte de dialogue suivante.
Lorsque vous utilisez le pilote ASIO mLAN, ouvrez le panneau de configuration ASIO depuis les
paramètres du pilote du logiciel DAW (le menu dépend du logiciel utilisé) et réglez le paramètre
Preferred Buffer Size selon vos besoins.
•
Par ailleurs, lorsque vous utilisez le pilote WDM mLAN, ajustez si nécessaire la valeur de la latence du pilote WDM
(qui correspond à la latence du pilote ASIO dans ce tableau) depuis les paramètres du pilote du logiciel DAW.
•
Le réglage initial du paramètre Preferred Buffer Size du pilote ASIO mLAN est la plus petite valeur.
q
w
e
t
r
q Preferred Buffer Size (Taille préférée du tampon)
Ce paramètre vous permet de spécifier la taille du tampon à l'intérieur du pilote ASIO mLAN.
w Sample Size (Taille de l'échantillon)
Ce paramètre vous permet de spécifier la résolution en bits de la transmission et de la réception de
données audio.
e Latency (Latence)
Indique la valeur de latence audio pour la transmission et la réception.
La latence audio est déterminée par la latence de base (sélectionnée dans la fenêtre mLAN Driver
Setup) et Preferred Buffer Size (w).
r OK
Cliquez sur ce bouton pour accepter les réglages et fermer la boîte de dialogue.
t Cancel (Annuler)
Cliquez sur cette touche pour fermer la boîte de dialogue sans modifier les réglages.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
16
Download from Www.Somanuals.com. All Manuals Search And Download.
e Status (Statut)
Si vous utilisez mLAN Graphic Patchbay,
reportez-vous au manuel en ligne de Graphic
Patchbay pour obtenir davantage d'informations
sur les messages d'erreur.
Si vous utilisez mLAN Auto Connector, ce
paramètre indique le statut actuel de réception
des données (MIDI/Audio) (du périphérique
mLAN vers l'ordinateur) de la connexion
mLAN. En cas d'erreur de transmission,
l'ordinateur affiche un message d'erreur.
Bleu........Les données sont correctement
transmises.
Jaune ......Un seul type de données (MIDI ou
audio) est reçu.
Rouge.....Erreur lors de la réception.
Gris.........Pas de réception.
A propos de la fenêtre Information
Cette fenêtre indique le statut de la réception des données MIDI et audio (du périphérique mLAN vers
l'ordinateur).
R1, R2, etc.
Indique le statut de réception des données. « R1 » correspond à
la réception de données MIDI et « R2 » à la réception de
données depuis le périphérique mLAN. Le nombre d'onglets
affichés varie en fonction de la configuration de votre ordinateur.
Receive Status (Statut de réception)
Indique l'ordre dans lequel les données de chaque format sont reçues. Le symbole « o »
indique que des données dans le format correspondant sont reçues. Le symbole « - »
indique que des données d'un format différent sont reçues. Par exemple, le symbole
« oooooooo- » dans la zone « Audio » indique que neuf séquences ont été reçues et que
les huit premières sont au format audio. La zone « Unknown » (Inconnu) contient des
symboles en cas de réception de séquences de format inconnu. Ces zones sont vides si
aucune donnée mLAN n'est reçue. En cas d'erreur lors de la réception, un message
d'avertissement rouge clignote. Dans ce cas, vérifiez le périphérique de transmission.
Icon (Icône)
Bleu ........ Réception normale.
Rouge..... Erreur lors de la
réception.
Gris......... Pas de réception.
r Set (Appliquer)
cliquer sur ce bouton pour restaurer les réglages
Cliquez sur ce bouton pour appliquer les
réglages effectués dans cette fenêtre. Les
modifications apportées aux paramètres ne
prendront pas effet si vous ne cliquez pas sur
[Set].
en vigueur la dernière fois que vous avez
sélectionné [Set]. Une fois que vous cliquez sur
[Set], vous ne pouvez plus utiliser [Revert].
y EXIT (Quitter)
Cliquez sur cette option pour fermer la boîte de
dialogue.
t Revert (Restaurer)
Si vous avez modifié les réglages (mais que vous
n'avez pas encore cliqué sur [Set]), vous pouvez
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Si le système audio de l'ordinateur prévoit la sortie audio via des canaux audiomLAN :
Le système audio de l'ordinateur (par exemple, un son d'alarme) permet au son de sortir par les
canaux audio mLAN si les réglages suivants sont effectués :
•
•
Le pilote WDM est sélectionné dans mLAN Auto Connector ou mLAN Graphic Patchbay.
Le pilote mLAN WDM (mLAN Audio Out/In 01) est sélectionné pour le périphérique audio
système Windows.
Suivez les étapes ci-dessous pour empêcher la sortie du son du système audio via les canaux audio
mLAN.
•
Le réglage suivant annule la sortie de tous les sons Wave via les haut-parleurs de l'ordinateur.
1
Sélectionnez [Démarrer] ➝ [Panneau de configuration] ➝ [Sons et périphériques audio] ➝ [Voix] et
cliquez sur [Volume…] dans la section « Lecture de la parole » pour appeler la fenêtre Master
Volume (Volume principal).
2
Cochez la case Muet dans la colonne Wave.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connexion d'un ordinateur à un périphérique mLAN via mLAN
•
Si vous utilisez Auto Connector après avoir effectué
des connexions dans mLAN Graphic Patchbay, ces
dernières seront annulées.
Cette section décrit la procédure de connexion
d'un ordinateur à un périphérique mLAN
unique, d'homologue à homologue, dans mLAN
Auto Connector.
Dans mLAN Auto Connector, vous pouvez
facilement connecter un périphérique mLAN en
configurant l'horloge et le nombre de canaux
d'entrée/sortie audio.
Pour connecter plusieurs périphériques mLAN à
un ordinateur, utilisez mLAN Graphic Patchbay.
Pour plus d'informations sur mLAN Graphic
Patchbay, reportez-vous au manuel en ligne de
mLAN Graphic Patchbay.
•
Vous pouvez également utiliser mLAN Graphic
Patchbay pour connecter un ordinateur à un
périphérique mLAN unique, d'homologue à
homologue.
•
Les fenêtres de mLAN Auto Connector peuvent
différer en fonction des périphériques mLAN
connectés.
1
2
Connectez un ordinateur à un périphérique
mLAN à l'aide d'un câble IEEE1394.
Cliquez avec le bouton droit sur l'icône de
YAMAHA mLAN Manager dans la barre des
tâches et sélectionnez ensuite [Auto
Connector].
•
La connexion d'un périphérique mLAN dans mLAN
Auto Connector peut être à l'origine de bruits. Avant
d'effectuer des connexions dans mLAN Auto
Connector, diminuer le volume du périphérique
connecté.
3
Configurez l'horloge et spécifiez le nombre de
canaux audio (voir ci-dessous), puis cliquez
sur [Connect] (Conencter). L'ordinateur et le
périphérique mLAN sont connectés via mLAN.
Connexion du i88X
e
r
q
w
y
t
u
i
o
!
!
!
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
19
Download from Www.Somanuals.com. All Manuals Search And Download.
q Nickname (Surnom)
i Bouton [ASIO/WDM]
Ce champ indique le surnom du i88X connecté.
Pour modifier le surnom, reportez-vous aux
informations relatives aux noeuds dans le
manuel en ligne de mLAN Graphic Patchbay.
Sélectionnez le pilote ASIO ou WDM en
fonction de votre environnement.
•
Avec des connexions analogiques, WDM utilise les
deux derniers des canaux ASIO sélectionnés. Les
signaux des canaux WDM sortent via OUTPUT 7 et 8.
w Model name (Nom du modèle)
Ce paramètre vous permet de sélectionner un
périphérique mLAN pour lequel vous souhaitez
effectuer une connexion mLAN dans un réseau
comportant plusieurs périphériques mLAN.
o PC ← i88X
Ce paramètre vous permet de spécifier le
nombre de canaux pour les données audio qui
entrent au niveau des prises (analogiques)
INPUT 1-8 du i88X, de la prise (numérique)
DIGITAL STEREO COAXIAL ou OPTICAL
IN ou encore de la prise ADAT IN (ADAT) et
qui sortent au niveau de l'ordinateur.
e Bouton [Update] (Mettre à jour)
Cliquez sur ce bouton pour mettre à jour les
informations relatives aux périphériques mLAN
connectés au réseau mLAN. Utilisez ce bouton
pour ajouter un périphérique mLAN au réseau
pendant l'exécution de mLAN Auto Connector.
! Bouton [Connect] (Connecter)
Cliquez sur ce bouton pour connecter le i88X à
l'ordinateur via mLAN.
r Bouton [Identify] (Identifier)
Lorsque vous cliquez sur ce bouton, le voyant
ACTIVE du i88X clignote quelques secondes.
! Bouton [Cancel] (Annuler)
Cliquez sur ce bouton pour annuler les réglages
et fermer mLAN Auto Connector.
t Sample Rate (Taux d'échantillonnage)
Ce paramètre vous permet de spécifier la
fréquence d'échantillonnage (fréquence
d'horloge).
! Bouton [Setup] (Configurer)
Cliquez sur ce bouton pour ouvrir la fenêtre
i88X Control Panel (Panneau de configuration
du i88X), qui vous permet de définir la vitesse
de transition de l'horloge.
y Cases d'option Wordclock Master
(Horloge maître)
Ces cases vous permettent de spécifier
l'ordinateur ou le i88X comme horloge maître.
u PC → i88X
Ce paramètre vous permet de spécifier le
nombre de canaux de données audio acheminées
de la sortie audio de l'ordinateur (sortie audio du
pilote mLAN) vers le i88X. Les signaux qui
entrent dans le i88X sortent par les prises
(analogiques) OUTPUT 1-8 du i88X, par la
prise (numérique) DIGITAL STEREO
COAXIAL ou OPTICAL OUT ou encore par la
prise ADAT OUT (ADAT).
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connexion de mLAN16E (MOTIF ES)
e
r
q
w
y
t
u
i
o
!
!
!
q Nickname (Surnom)
t Sample Rate (Taux d'échantillonnage)
Ce paramètre vous permet de spécifier la
fréquence d'échantillonnage (fréquence
d'horloge).
Ce champ indique le surnom de la carte
mLAN16E connectée. Pour modifier le surnom,
reportez-vous aux informations relatives aux
noeuds dans le manuel en ligne de mLAN
Graphic Patchbay.
y Cases d'option Wordclock Master
(Horloge maître)
w Model name (Nom du modèle)
Ce paramètre vous permet de sélectionner un
périphérique mLAN pour lequel vous souhaitez
effectuer une connexion mLAN dans un réseau
comportant plusieurs périphériques mLAN.
Une fois la carte mLAN16E connectée,
sélectionnez le nom du périphérique équipé de
cette carte.
Ces cases vous permettent de spécifier
horloge maître.
Ce paramètre vous permet de spécifier le
nombre de canaux de données audio qui entrent
au niveau de la carte mLAN16E depuis la sortie
audio de l'ordinateur (sortie audio du pilote
mLAN).
e Bouton [Update] (Mettre à jour)
Cliquez sur ce bouton pour mettre à jour les
informations relatives aux périphériques mLAN
connectés au réseau mLAN. Utilisez ce bouton
pour ajouter un périphérique mLAN au réseau
pendant l'exécution de mLAN Auto Connector.
i Bouton [ASIO/WDM]
Sélectionnez le pilote ASIO ou WDM en
fonction de votre environnement.
r Bouton [Identify] (Identifier)
Lorsque vous cliquez sur ce bouton, le voyant
ACTIVE de la carte mLAN16E clignote
pendant quelques secondes.
•
Avec le MOTIF ES, WDM utilise les deux derniers
canaux ASIO sélectionnés via « mLAN INPUT ». Les
signaux des canaux WDM sont acheminés vers le
MOTIF ES sous la forme « mLAN IN 7/8CH ».
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
21
Download from Www.Somanuals.com. All Manuals Search And Download.
o PC ← MOTIF ES
Réglage Wordclock Transition Speed
(Vitesse de transition de l'horloge)
(Panneau de configuration du mLAN)
Ce paramètre vous permet de spécifier le
nombre de canaux de données audio qui entrent
au niveau de l'ordinateur depuis la sortie de la
carte mLAN16E.
Lorsque vous cliquez sur le bouton [Setup]
dans le fenêtre Node Information de mLAN
Auto Connector ou de mLAN Graphic
Patchbay, le panneau de configuration du
mLAN s'ouvre. Ce panneau vous permet de
définir la vitesse de transition de l'horloge.
Le paramètre de vitesse de transition de
l'horloge vous permet de spécifier la vitesse
avec laquelle le réglage initial d'horloge
passe à un nouveau réglage si le périphérique
mLAN opère en tant qu'esclave dans un
réseau mLAN.
•
•
Le nombre de canaux de transmission audio et de
ports MIDI varie en fonction des périphériques
compatibles mLAN16E.
Pour plus d'informations sur les connexions audio et
MIDI pour un MOTIF ES doté d'une carte mLAN16E,
reportez-vous aux exemples système fournis dans le
mode d'emploi de la carte mLAN16E.
! Bouton [Connect] (Connecter)
Cliquez sur ce bouton pour connecter la carte
mLAN16E à l'ordinateur via mLAN.
Slow (Lent) :
En principe, sélectionnez cette option.
Fast (Rapide) :
! Bouton [Cancel] (Annuler)
Sélectionnez cette option si le périphérique
qui opère en tant qu'horloge maître fait
référence à un code temporel, par exemple
MTC, qui modifie dès lors le réglage de
l'horloge.
Cliquez sur ce bouton pour annuler les réglages
et fermer mLAN Auto Connector.
! Bouton [Setup] (Configurer)
Cliquez sur ce bouton pour ouvrir la fenêtre
mLAN16E Control Panel (Panneau de
configuration de la carte mLAN16E), qui vous
permet de définir la vitesse de transition de
l'horloge.
4
Cliquez sur [Connect]. Si la carte mLAN16E est correctement connectée, mLAN Auto Connector se
ferme et les communications mLAN démarrent.
•
Si la connexion échoue, cliquez avec le bouton droit sur l'icône mLAN dans la barre des tâches, redémarrez
mLAN Auto Connector, puis cliquez une nouvelle fois sur [Connect]. Il n'est pas nécessaire de redémarrer
l'ordinateur.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Astuces en cas d'utilisation de données audio (Windows)
Pour une utilisation optimale des fonctions audio, nous vous recommandons d'effectuer les
paramétrages suivants. Ceux-ci permettent de limiter les éventuels problèmes audio, tels que des
coupures, des dissonances et des bruits parasites.
•
•
•
Activez le mode DMA (mode de transfert grande vitesse) du disque dur
Pour paramétrer le mode DMA, sélectionnez [Panneau de configuration] ➝ [Système]
(➝ [Matériel]) ➝ [Gestionnaire de périphériques], puis modifiez le paramètre dans [Lecteurs de
disque] ou [Contrôleurs de disque dur].
Paramétrez Performance des applications sur « Les services d'arrière-plan »
Sélectionnez [Panneau de configuration] ➝ [Système] ➝ [Avancé] ➝ [Performances]
➝ [Paramètres] ➝ [Avancé] et cochez (activez) « Les services d'arrière-plan » dans la section
« Performance des applications ».
Paramétrez l'option Effets visuels sur « meilleures performances »
Sélectionnez [Panneau de configuration] ➝ [Système] ➝ [Avancé] ➝ [Performances]
➝ [Paramètres] ➝ [Effets visuels] et cochez (activez) « Ajuster afin d'obtenir les meilleures
performances ».
•
•
•
•
Désactivez les mises à jour automatiques
Sélectionnez [Panneau de configuration] ➝ [Système] ➝ [Mises à jour automatiques] et
décochez (désactivez) l'option « Mettre à jour mon ordinateur ».
Désactivez l'assistance à distance
Sélectionnez [Panneau de configuration] ➝ [Système] ➝ [Utilisation à distance] et décochez
l'option « Autoriser l'envoi d'invitations d'assistance à distance… ».
Activez le menu Démarrage classique
Cliquez avec le bouton droit à un endroit vide de la barre de tâches et sélectionnez [Propriétés]
➝ [Menu Démarrer], puis cochez (activez) « Menu Démarrer classique ».
Désactivez les effets de transition
Sélectionnez [Panneau de configuration] ➝ [Affichage] (➝ [Apparence]) ➝ bouton [Effets...] et
décochez (désactivez) l'option « Utiliser l'effet de transition suivant pour les menus et les
info-bulles ».
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Lorsque vous ne pouvez pas modifier les paramètres de mLAN Auto Connector ou de
Driver Setup ou que vous ne pouvez pas désinstaller mLAN Applications for YAMAHA/
mLAN Tools 2.0.
Le message ci-dessous apparaît parfois lorsque vous modifiez les réglages de mLAN Auto Connector
et de Driver Setup ou en cas de désinstallation d'un programme.
Lorsque vous utilisez le pilote mLAN avec un programme tel qu'un séquenceur audio, vous ne pouvez
pas modifier les réglages de mLAN Auto Connector et Driver Setup, pas plus que désinstaller mLAN
Applications forYAMAHA/mLAN Tools 2.0. Vous ne pouvez exécuter ces opérations qu'après avoir
fermé toutes les applications.
I peut arriver que vous ne pouviez pas modifier les réglages dans mLAN Auto Connector et Driver
Setup, pas plus que de désinstaller mLAN Applications forYAMAHA/mLANTools 2.0, même lorsque ces
applications ne sont pas en cours d'exécution. Cela peut arriver dans les cas suivants.
•
•
Le pilote WDM est sélectionné dans mLAN Auto Connector ou mLAN Graphic Patchbay.
Lorsque le pilote WDM mLAN (« mLAN Audio Out/In 01 ») ou « mLAN MIDI Out » est
sélectionné en tant que périphérique audio dans Windows.
Dans ce cas, suivez les instructions ci-dessous avant de modifier les réglages de mLAN Auto
Connector et de Driver Setup et/ou de désinstaller mLAN Applications for YAMAHA/mLAN Tools 2.0.
•
Dans certains cas, lorsque vous mettez les périphériques mLAN sous tension, il arrive que Windows sélectionne
automatiquement mLAN Audio/MIDI.
1
2
3
Sélectionnez [Démarrer] ➝ [Panneau de configuration] ➝ [Sons et périphériques audio] ➝ [Voix].
Assurez-vous qu'une option autre que « mLAN Audio Out/In 01 » est sélectionnée pour les
paramètres « Lecture de la parole » et « Enregistrement vocal ».
Sélectionnez [Démarrer] ➝ [Panneau de configuration] ➝ [Sons et périphériques audio] ➝ [Audio].
Assurez-vous qu'une option autre que « mLAN Audio 01 » est sélectionnée pour les paramètres
« Lecture audio » et « Enregistrement audio ».
Sélectionnez [Démarrer] ➝ [Panneau de configuration] ➝ [Sons et périphériques audio] ➝ [Audio],
puis sélectionnez une option autre que les éléments proposés de « mLAN MIDI OUT » à « mLAN
MIDI OUT (8) » pour le paramètre « Lecture MIDI ».
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation de l'effet plug-in (pour les utilisateurs de i88X)
1
2
3
Double-cliquez sur le dossier « VST_ ».
Plusieurs fichiers, parmi lesquels
« Setup.exe », s'affichent.
8
Cliquez sur [Suivant]. Dans la fenêtre qui
apparaît, sélectionnez le dossier
« VstPlugins » dans lequel l'effet plug-in doit
être installé.
Double-cliquez sur « Setup.exe ». La fenêtre
« Bienvenue dans l'InstallShield Wizard »
s'affiche.
•
•
Pour pouvoir utiliser le logiciel VST Plug-in avec
le SQ01, vous devez vérifier
« Programmes\YAMAHA\VstPlugins ».
Cliquez sur [Suivant]. Dans la fenêtre qui
apparaît, saisissez le nom d'utilisateur, le nom
de la société et le numéro de série.
Si aucun dossier n'apparaît dans la liste, cliquez
sur [Parcourir], puis sélectionnez le dossier dans
la boîte de dialogue « Rechercher dossier ».
•
Vous pouvez trouver le numéro de série sur la
carte utilisateur fournie.
4
Cliquez sur [Suivant]. La fenêtre de
confirmation de l'enregistrement apparaît.
Vérifiez que les informations relatives à
l'enregistrement sont correctes, puis cliquez
sur [Oui].
•
Si les informations sont incorrectes, cliquez sur
[Non] et revenez à l'étape 3 ci-dessus.
5
6
Une fenêtre de sélection des effets plug-in
apparaît. Sélectionnez (cochez) le logiciel à
installer, puis cliquez sur [Suivant].
9
10
Cliquez sur [Suivant]. L'installation débute.
Une fois l'installation terminée, le message
« Fin de l'InstallShield Wizard » apparaît.
Cliquez sur [Terminer].
Une fenêtre vous invitant à confirmer
l'installation des effets plug-in apparaît.
Vérifiez que les informations sont correctes,
puis cliquez sur [Oui].
•Si vous souhaitez modifier le logiciel à installer,
cliquez sur [Précédent] et revenez à l'étape 5.
7
Dans la fenêtre qui apparaît ensuite, vous
pouvez sélectionner le lecteur et le dossier
dans lesquels installer le mode d'emploi
(fichier PDF) et le programme d'exécution.
Evitez de modifier l'emplacement de
destination.
• Si vous souhaitez modifier l'emplacement, cliquez
sur [Parcourir], puis sélectionnez l'emplacement
de destination (lecteur et dossier).
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilisation de l'effet plug-in
installé sur une autre
Désinstallation (suppression de
l'effet plug-in installé)
application hôte
1
2
3
Sélectionnez [Démarrer] ➝ [(Tous les)
Programmes] ➝ [YAMAHA VST Plugins]
➝ [(nom de l'effet plug-in)] ➝ [Configurer].
Un écran de bienvenue apparaît.
Même après avoir installé l'effet plug-in, si
vous prévoyez de l'utiliser avec une autre
application hôte compatible avec VST, vous
devrez copier manuellement le module de
l'effet plug-in dans le dossier « VstPlugins »
spécifié par l'application hôte.
Sélectionnez [Supprimer], puis cliquez sur
[Suivant].
Une fenêtre vous invitant à confirmer la
suppression du fichier apparaît.
1
Sélectionnez [Démarrer] ➝ [(Tous les)
Programmes] ➝ [YAMAHA VST Plugins]
➝ [(nom de l'effet plug-in)] ➝ [Configurer].
Un écran de bienvenue apparaît.
Cliquez sur [OK] pour supprimer les
fichiers.
2
3
Sélectionnez [Modifier], puis cliquez sur
[Suivant].
•
Pour annuler l'opération, cliquez sur [Annuler].
Une fenêtre vous permettant de spécifier à
quel endroit copier l'effet plug-in apparaît.
Sélectionnez (cochez) le dossier
•
Les vitesses de traitement des ordinateurs équipés
de processeurs Pentium I et de certains ordinateurs
équipés de processeurs Pentium IV peuvent être
réduites de manière significative si vous utilisez
Pitch Fix et Cubase SX2.0.
« VstPlugins » correspondant à
l'application hôte avec laquelle vous avez
l'intention d'utiliser l'effet plug-in.
Si vous rencontrez ce problème, téléchargez depuis
le lien suivant une mise à jour de Pitch Fix, version
1.0.2 ou supérieure :
•
•
Si vous désélectionnez le dossier de
l'application hôte installée, vous pouvez
supprimer l'effet plug-in installé.
http://www.yamahasynth.com/down/index.htm
Pour plus de détails, reportez-vous au mode
d'emploi de chaque application hôte.
4
Cliquez sur [Suivant].
L'opération de copie s'exécute.
•
Pour annuler l'opération, cliquez sur [Annuler].
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Pour les utilisateurs de Macintosh
Contenu du CD-ROM
Les logiciels pour Macintosh sont compris sur deux CD-ROM (pour la carte mLAN16E, seul TOOLS
for i88X/mLAN16E est inclus). Installez d'abord TOOLS for i88X/mLAN16E.
G TOOLS for i88X/mLAN16E
Nom du
dossier
Nom de
l'application
Contenu
Vous permet de visualiser les manuels PDF des différentes
Acroread_
mLAN_
Acrobat Reader *1 *2 applications.
• Ouvrez l'aide en ligne en appuyant sur la touche [F1] de l'ordinateur.
Ce logiciel comprend les pilotes mLAN et les applications nécessaires
pour effectuer des connexions mLAN entre les périphériques mLAN et
l'ordinateur. Installez le logiciel lorsque les périphériques mLAN sont
hors tension.
• Pour obtenir des instructions d'installation, reportez-vous à la page 30.
Une procédure d'installation unique installe toutes les applications
nécessaires aux communications mLAN. Parmi les logiciels à installer,
mLAN Auto Connector et mLAN Graphic Patchbay, qui permettent de
configurer les connexions audio et MIDI d'un réseau mLAN.
mLAN Applications
for YAMAHA
mLAN Tools
Ce logiciel est nécessaire pour transférer les données MIDI (données
Open Music System Remote Control et Studio Manager) entre un périphérique mLAN et un
(OMS) 2.3.8*2
ordinateur.
OMS_
• Pour obtenir des instructions d'installation, reportez-vous à la page 31.
OMS Setup for
YAMAHA (dossier)
Contient les fichiers de configuration OMS pour un périphérique mLAN
(page 36).
G Plug-in Effect (inclus avec le i88X uniquement)
• Ce logiciel peut être utilisé en tant qu'application plug-in dans un programme compatible VST.
• Pour obtenir des instructions sur l'utilisation de l'application, veuillez vous reporter au manuel PDF.
(Le disque de destination que vous avez spécifié)/YAMAHA/Plug-in Effect/(le dossier du logiciel
approprié)
• Pour obtenir des instructions sur l'installation de Plug-in Effect, reportez-vous à la page 38.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Nom de
l'application
Nom du dossier*3
Contenu
Ce logiciel reproduit les effets d'égaliseur et de dynamique
intégrés dans chacun des canaux du Digital Mixing Studio 01X
de Yamaha et utilise la puissance de traitement de l'ordinateur
pour produire les effets.
Vous pouvez utiliser les fonctions de dynamiques et de
l'égaliseur à quatre bandes (également disponibles sur les
consoles de mixage numérique Yamaha Digital Mixing) comme
logiciel d'effets. Vous pouvez également importer les réglages
du 01X et ainsi reproduire les morceaux créés sur le 01X.
01X Channel
Module*1
Ce programme est utilisé pour modifier la hauteur de ton des
voix enregistrées. Plus qu'un simple processeur de hauteur de
ton, il vous permet également de modifier le caractère des voix.
En outre, vous pouvez utiliser des données MIDI sur
l'application hôte pour contrôler l'effet Pitch Fix (Fixation de la
hauteur de ton). Pour plus d'informations sur la configuration
avec l'application hôte, reportez-vous au mode d'emploi du
Pitch Fix au format PDF.
Mac OS 9
VST_
Pitch Fix*1
Programme à effets multiples utilisé pour le traitement des voix.
Le plug-in propose différents effets, dont un filtre passe-haut,
un compresseur et un égaliseur à trois bandes.
Vocal Rack*1
Final Master*1
Programme à effets multiples utilisé à des fins de mastérisation.
Il comprend un processeur, un limiteur et une fonction
d'écrêtage léger et vous permet de diviser le signal en trois
bandes afin de procéder à un traitement multi-bandes distinct.
*1 Ces applications sont fournies avec des manuels PDF/en ligne.
*2 Malheureusement, Yamaha ne peut garantir la stabilité de ces programmes, de même qu'il ne peut
proposer d'assistance utilisateur pour ceux-ci.
*3 A propos des effets plug-in compatibles avec Mac OS X
Les effets plug-in suivants, qui sont compatibles avec VST et Audio Units, sont disponibles dans le
dossier « Mac OS X ».
• 01X Channel Module
• Pitch Fix
• Vocal Rack
• Final Master
Malheureusement, les effets du logiciel ne peuvent pas être utilisés avec le i88X/mLAN16E à l'heure
actuelle, dans la mesure où le pilote audio i88X/mLAN16E/MIDI n'est pas encore compatible avec le
Mac OS X.
Nous travaillons actuellement en collaboration avec Apple Computer, Inc. et le i88X/mLAN16E devrait
être compatible avec le Mac OS X dans un avenir proche. Pour obtenir les toutes dernières
informations, veuillez consulter le site ci-dessous :
http://www.yamahasynth.com
Ce site propose également des instructions pour l'installation des effets du logiciel sur le OS X
Si vous utilisez un ordinateur portable Macintosh tel que iBook ou PowerBook, connectez d'abord le
périphérique mLAN et le câble du mLAN, puis mettez le mLAN sous tension, avant d'allumer
l'ordinateur.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration requise pour le logiciel i88X/mLAN16E
La configuration système spécifiée ci-dessous est requise pour pouvoir utiliser les logiciels fournis.
•
•
La configuration matérielle présentée ci-dessous peut différer légèrement en fonction du système d'exploitation utilisé.
Pour plus de détails sur la configuration minimale requise pour chaque logiciel DAW (station de travail audionumérique),
reportez-vous aux modes d'emploi correspondants.
*2 Acrobat Reader n'est pas inclus.
G i88X/mLAN16E (y compris la
*3 La configuration système décrite ici
s'applique lorsque vous utilisez le logiciel
fourni et que vous reproduisez les données
audio/MIDI détaillées ci-dessous sur un
logiciel de séquençage standard. Elle peut
néanmoins varier en fonction du logiciel de
séquençage utilisé.
configuration requise pour mLAN Tools
2.0/mLAN Applications for YAMAHA)
La configuration système totale, qui inclut le
séquenceur audio, mLAN Tools 2.0/mLAN
Applications for YAMAHA et les effets plug-
in, est la suivante.
Configuration système recommandée (Connexion
d'un périphérique mLAN unique à un ordinateur,
d'homologue à homologue) :
Système
: Mac OS 9.2 (les environnements
d'exploitation Mac OS X et Mac Classic ne sont
pas pris en charge).
Ordinateur : système équipé d'une borne
FireWire S400 (400 Mbps)
Fs=44,1 kHz/24 bits
Audio Driver 18In/18Out (i88X), 16 In/
8 Out (mLAN16E)
MIDI Driver 1In/1Out (i88X), 3 In/3 Out
(mLAN16E)
16 pistes de reproduction MIDI et
12 pistes de reproduction audio
2 pistes d'enregistrement audio
2 effets d'envoi Soft Effect plug-in
10 effets d'insertion Soft Effect plug-in
2 canaux pour Soft Synthesizer plug-in
Temps d'attente inférieur ou égal à
5 msec
intégrée. (*1)
Disque dur : 250 Mo (i88X) ou 50 Mo (mLAN16E)
d'espace disque disponible
minimum ; disque dur haute
vitesse (*2)
G Système recommandé (*3)
• Connexion d'un périphérique mLAN unique
à un ordinateur d'homologue à homologue :
Ordinateur
: processeur de signaux
G4/G3 de 900 MHz
(ou supérieur)
Mémoire disponible : 512 Mo minimum (la
mémoire virtuelle doit
être désactivée)
• Connexion de trois périphériques mLAN à
un ordinateur :
Configuration système recommandée (Connexion
d'un ordinateur et trois périphérique mLAN)
Fs=44,1 kHz/24 bits
Audio Driver 32In/32Out (total)
MIDI Driver 4In/5Out (total)
Ordinateur
: processeur simple G4
de 1,25 GHz,
processeur double G4
de 1 GHz ou
16 pistes de reproduction MIDI et
8 pistes de reproduction audio
2 pistes d'enregistrement audio
2 effets d'envoi Soft Effect plug-in
10 effets d'insertion Soft Effect plug-in
2 canaux pour Soft Synthesizer plug-in
Temps d'attente inférieur ou égal à
5 msec
supérieur
Mémoire disponible : 512 Mo minimum (la
mémoire virtuelle doit
être désactivée)
G Configuration minimale requise (*3)
Ordinateur
: processeur double G4
de 450 MHz ou
processeur simple
G4/G3 de 700 MHz
(ou supérieur)
Configuration minimale requise
Fs=44,1 kHz/16 bits
Audio Driver 8In/2Out (i88X), 2In/
2Out(mLAN16E)
MIDI Driver 1In/1Out (i88X), 2In/2Out
(mLAN16E)
16 pistes de reproduction MIDI et
12 pistes de reproduction audio
2 effets d'envoi Soft Effect plug-in
6 effets d'insertion Soft Effect plug-in
Pas de Soft Synthesizer plug-in
Temps d'attente d'environ 50 msec
Mémoire disponible : 320 Mo minimum (la
mémoire virtuelle doit
être désactivée)
*1 L'ordinateur doit être équipé d'une borne
IEEE 1394 (FireWire) ou i.Link. En l'absence
de borne, installez une carte d'interface IEEE
1394 (PCI ou PC).
Pour plus de détails sur la configuration
système et les cartes PCI ou PC
recommandées, consultez le site
http://www.yamahasynth.com
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
29
Download from Www.Somanuals.com. All Manuals Search And Download.
G Plug-in Effect (inclus avec le i88X
uniquement)
Système d'exploitation: Mac OS 8.6 à 9.2
Mac OS X 10.2
•
•
Vous pouvez utiliser deux cartes PCI ou PC
maximum. Cependant, vous ne pouvez vous servir
que d'une seule carte à la fois.
Si vous utilisez une interface IEEE1394 intégrée à
l'ordinateur, vous ne pouvez utiliser qu'une seule
carte d'interface IEEE1394 PCI ou PC en même
temps.
•
Lorsque vous utilisez un PowerBook avec des
Panel] ➝ [Energy Saver] ➝ [Advanced Settings]
(Settings for: Battery) et désactivez l'option
« Allow processor cycling ».
Si vous utilisez un ordinateur portable, il est
possible qu'aucune borne IEEE 1394 intégrée ne
soit disponible. Dans ce cas, installez une carte
d'interface PC appropriée.
Installation des logiciels
Pour obtenir des instructions sur l'installation des logiciels autres que celui décrit ci-dessous,
reportez-vous à la page 27 de la section « Contenu du CD-ROM ».
Acrobat Reader
3
4
Double-cliquez sur « Reader Installer ».
La boîte de dialogue d'installation d'Acrobat
Reader s'affiche.
Pour pouvoir visualiser les manuels
électroniques (PDF) fournis avec chaque
application, vous devez installer Acrobat
Reader.
Procédez à l'installation en suivant les
indications qui apparaissent à l'écran.
Une fois l'installation terminée, le dossier
Acrobat apparaît sur votre ordinateur (par
défaut, sur le disque dur).
1
Double-cliquez sur le dossier « Acroread_ ».
Trois dossiers de langues différents
s'affichent : English (Anglais), German
(Allemand), French (Français) et Japanese
(Japonais).
Pour plus d'informations sur l'utilisation
d'Acrobat Reader, consultez le Reader Guide
dans le menu Help.
2
Sélectionnez la langue que vous souhaitez
utiliser et double-cliquez sur son dossier. La
fenêtre « Reader Installer » s'affiche.
Le nom du programme d'installation peut
varier en fonction de la langue sélectionnée.
Logiciel mLAN et OMS
Le logiciel mLAN Tools 2.0 comprend un pilote qui vous permet de connecter des périphériques mLAN
à un ordinateur.
Le logiciel mLAN Applications for YAMAHA permet le transfert des signaux audio et MIDI entre un
périphériques i88X, mLAN16E ou 01X à l'ordinateur via mLAN.
Suivez les étapes ci-dessous pour installer ces applications logicielles.
•
•
Pour obtenir des explications sur les messages
d'erreur, reportez-vous à la page 39.
Pour plus d'informations sur la procédure de
désinstallation (retrait de l'application installée),
reportez-vous à la page 32.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
30
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Après avoir redémarré votre Macintosh, le
dossier « Opcode »/« OMS Applications » se
trouve sur votre ordinateur (par défaut, sur le
disque dur).
Préparation de l'installation
1
Allumez l'ordinateur.
ATTENTION
10
Copiez le fichier « OMS_2.3_Mac.pdf » du
CD-ROM vers le dossier « OMS
Applications » (opération de glisser-
déplacer).
•
Lorsque vous utilisez la connexion mLAN,
prenez soin de désactiver toutes les fonctions
d'économie d'énergie de l'ordinateur (telles
que Suspension, Veille, Attente ou Pause). Si
vous utilisez la mémoire virtuelle, désactivez-
la, puis redémarrez l'ordinateur.
Reportez-vous au fichier
« OMS_2.3_Mac.pdf » (version anglaise
uniquement) pour plus d'informations sur
l'utilisation de l'application.
•
Si vous utilisez le taux de transfert de données
S200 (vérifiez sur le panneau arrière de votre
périphérique ou reportez-vous aux
caractéristiques techniques du mode d'emploi),
veillez à désinstaller préalablement l'ancienne
version de mLAN Tools. (Reportez-vous au
mode d'emploi de votre périphérique.)
11
Copiez le dossier « OMS Setup for
YAMAHA » du CD-ROM vers le dossier
« OMS Applications » (opération de glisser-
déplacer).
Le dossier « OMS Setup for YAMAHA »
contient les fichiers d'installation OMS des
cartes i88X et mLAN16E, qui peuvent être
utilisés comme modèles.
2
3
Sortez des applications ouvertes et fermez
toutes les fenêtres actives.
Débranchez tous les câbles MIDI reliant les
périphériques MIDI aux bornes MIDI IN/OUT
(Entrée/sortie MIDI) du périphérique mLAN.
Logiciel mLAN
12
Double-cliquez sur l'icône « YAMAHA
4
A l'aide d'un câble IEEE 1394 (FireWire/iLink),
connectez le 01X directement à l'ordinateur
(sans utiliser de concentrateur) et débranchez
tous les autres périphériques connectés via la
borne IEEE1394 de l'ordinateur.
mLAN Installer » du dossier « mLAN_ »
pour afficher l'écran d'installation suivant.
Le champ « Install Location » affiche la
destination de l'installation. Si vous
souhaitez changer le disque ou le dossier
de destination, utilisez le bouton [Switch
Disk] (Changer de disque) et le menu
déroulant pour définir la destination
souhaitée.
5
Insérez le CD-ROM inclus (« TOOLS for i88X/
mLAN16E ») dans le lecteur de CD-ROM.
OMS (Open Music System)
6
7
8
Double-cliquez sur le dossier « OMS_ »
(disponible uniquement en version anglaise).
« Install OMS 2.3.8 » s'affiche.
•
En général, il n'est pas nécessaire de modifier le
répertoire de destination.
Double-cliquez sur « Install OMS 2.3.8 ».
La boîte de dialogue OMS Setup (Installation
d'OMS) s'affiche.
Procédez à l'installation en suivant les
instructions qui apparaissent à l'écran.
Après l'installation, sélectionnez « Restart »
(Redémarrer).
•
Au terme de l'installation, il est possible qu'un
message d'erreur indiquant que le programme
d'installation n'a pas été fermé s'affiche. Dans ce
cas, allez dans le menu « File » (Fichier) et
sélectionnez « Quit » (Quitter) pour fermer le
programme d'installation. Redémarrez ensuite
l'ordinateur.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
31
Download from Www.Somanuals.com. All Manuals Search And Download.
13
14
Vérifiez que « Easy install » est sélectionné
et cliquez sur « Install ». Cliquez sur
« Continue » (Continuer) en réponse au
message de confirmation qui apparaît.
Le dossier que vous spécifiez
Dossier mLAN Tools
Opcode/OMS Applications
Si le message « OMS Folder cannot be
found in the system folder » (Dossier OMS
introuvable dans le dossier système) ou un
message similaire s'affiche au terme de
l'installation, copiez le fichier « mLAN OMS
Driver » (situé dans le dossier « Into OMS
Folder » du dossier « mLAN Tools » du
dossier de destination de l'installation) dans
le dossier système « OMS Folder ».
Dossier système
Control Panels/mLAN Driver Setup
OMS Folder/mLAN OMS Driver
Preferences/mLAN HALs/01XTransporter.hal
Preferences /mLAN HALs/i88XTransporter.hal
Preferences /mLAN HALs/
mLAN16ETransporter.hal
Preferences /mLAN Prefs/mLAN Control Panel
Prefs
15
16
Le message vous invitant à rechercher le
dossier ASIO Drivers s'affiche. Cliquez sur
[OK]. Le résultat de la recherche s'affiche.
Preferences /mLAN Prefs/oui.tbl
Sélectionnez le dossier de destination du
pilote ASIO mLAN, puis cliquez sur [OK].
* Supprimez les fichiers et dossiers répertoriés
ci-dessus lors de la désinstallation. Prenez
soin de ne pas supprimer des données déjà
présentes avant l'installation, de même que les
fichiers liés à l'OMS
•
Si le message « ASIO Driver folder cannot be
found in the system folder » (Dossier du pilote
ASIO introuvable dans le dossier système) ou un
message similaire s'affiche au terme de
l'installation, copiez le fichier « ASIO mLAN »
(situé dans le dossier « Into ASIO Drivers » du
dossier « mLAN Tools » du dossier de
destination de l'installation) dans le dossier «
ASIO Drivers » de l'application que vous utilisez.
Modification des paramètres après
l'installation
Vous pouvez modifier les paramètres du mLAN
après l'installation depuis la fenêtre mLAN
Driver Setup. Pour l'afficher, démarrez mLAN
17
18
Mettez le périphérique mLAN sous tension.
Au terme de l'installation, le message
« Installation was successful. » apparaît à
l'écran. Cliquez sur [Restart].
mLAN Driver Setup
Confirmation de l'installation
Le programme d'installation mLAN Installer
place les fichiers suivants aux emplacements
suivants.
Cette fenêtre vous permet de vérifier et de
modifier les paramètres de réception/
transmission de données du mLAN. Prenez soin
de fermer toutes les applications (DAW, etc.)
utilisant la connexion mLAN avant d'apporter
des modifications. Les paramètres sont les
mêmes que dans Windows. Voir page 15.
Dossier Control panel (Panneau de
configuration) du disque de démarrage
mLAN Driver Setup (page 15)
•
Vous pouvez utiliser le mLAN Driver Setup (page 15)
pour vérifier si les données sont correctement
transmises et reçues via le bus mLAN.
•
•
Le paramètre WDM concerne uniquement Windows.
Le bouton [EXIT] est uniquement disponible dans
Windows.
Dossier Extensions du disque de
démarrage
mLAN Driver
•
Pour modifier l'horloge (taux d'échantillonnage) et le
nombre de canaux utilisés, lancez mLAN Auto
Connector dans le dossier mLAN Tools.
mLAN Driver Plugs
mLAN Expert
mLAN Family
mLAN Transporter Family
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Connexion d'un ordinateur à un périphérique mLAN via mLAN
•
Si vous utilisez Auto Connector après avoir effectué
des connexions dans mLAN Graphic Patchbay, ces
dernières seront annulées.
Cette section explique comment connecter un
ordinateur à un périphérique mLAN unique,
d'homologue à homologue, dans mLAN Auto
Connector.
Dans mLAN Auto Connector, vous pouvez
facilement connecter un périphérique mLAN en
configurant l'horloge et en spécifiant le nombre
de canaux d'entrée/sortie audio.
Pour connecter plusieurs périphériques mLAN à
un ordinateur, utilisez mLAN Graphic Patchbay.
Pour plus d'informations sur mLAN Graphic
Patchbay, reportez-vous au manuel en ligne de
mLAN Graphic Patchbay.
•
Vous pouvez également utiliser mLAN Graphic
Patchbay pour connecter un ordinateur à un
périphérique mLAN unique, d'homologue à
homologue.
•
Les fenêtres de mLAN Auto Connector peuvent
différer en fonction des périphériques mLAN
connectés.
1
2
Connectez un ordinateur à un périphérique
mLAN à l'aide d'un câble IEEE1394.
Ouvrez le dossier « mLAN Tools », puis
cliquez sur l'icône « mLAN Auto Connector ».
mLAN Auto Connector démarre.
•
La connexion d'un périphérique mLAN dans mLAN
Auto Connector peut être à l'origine de bruits. Avant
d'effectuer des connexions dans mLAN Auto
Connector, diminuer le volume du périphérique
connecté.
3
Configurez l'horloge et spécifiez le nombre de
canaux audio (voir ci-dessous), puis cliquez
sur [Connect] (Conencter). L'ordinateur et le
périphérique mLAN sont connectés via mLAN.
Connexion du i88X
q
w
e
r
t
y
u
i
!
!
o
q Nickname (Surnom)
w Model name (Nom du modèle)
Ce champ indique le surnom du i88X connecté.
Pour modifier le surnom, reportez-vous aux
informations relatives aux noeuds dans le
manuel en ligne de mLAN Graphic Patchbay.
Ce paramètre vous permet de sélectionner un
périphérique mLAN pour lequel vous souhaitez
effectuer une connexion mLAN dans un réseau
comportant plusieurs périphériques mLAN.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
33
Download from Www.Somanuals.com. All Manuals Search And Download.
e Bouton [Update] (Mettre à jour)
i Mac ← i88X
Cliquez sur ce bouton pour mettre à jour les
informations relatives aux périphériques mLAN
connectés au réseau mLAN. Utilisez ce bouton
pour ajouter un périphérique mLAN au réseau
pendant l'exécution de mLAN Auto Connector.
Ce paramètre vous permet de spécifier le
nombre de canaux pour les données audio qui
entrent au niveau des prises (analogiques)
INPUT 1-8 du i88X, de la prise (numérique)
DIGITAL STEREO COAXIAL ou OPTICAL
IN ou encore de la prise ADAT IN (ADAT) et
qui sortent au niveau de l'ordinateur.
r Bouton [Identify] (Identifier)
Lorsque vous cliquez sur ce bouton, le voyant
ACTIVE du i88X clignote quelques secondes.
o Bouton [Connect] (Connecter)
Cliquez sur ce bouton pour connecter le i88X à
l'ordinateur via mLAN.
t Sample Rate (Taux d'échantillonnage)
Ce paramètre vous permet de spécifier la
fréquence d'échantillonnage (fréquence
d'horloge).
! Bouton [Cancel] (Annuler)
Cliquez sur ce bouton pour annuler les réglages
et fermer mLAN Auto Connector.
y Cases d'option Wordclock Master
(Horloge maître)
! Bouton [Setup] (Configurer)
Ces cases vous permettent de spécifier
l'ordinateur ou le i88X comme horloge maître.
Cliquez sur ce bouton pour ouvrir la fenêtre
i88X Control Panel (Panneau de configuration
du i88X), qui vous permet de définir la vitesse
de transition de l'horloge.
u Mac → i88X
Ce paramètre vous permet de spécifier le
nombre de canaux de données audio acheminées
de la sortie audio de l'ordinateur (sortie audio du
pilote mLAN) vers le i88X. Les signaux qui
entrent dans le i88X sortent par les prises
(analogiques) OUTPUT 1-8 du i88X, par la
prise (numérique) DIGITAL STEREO
COAXIAL ou OPTICAL OUT ou encore par la
prise ADAT OUT (ADAT).
Connexion de mLAN16E (MOTIF ES)
q
w
e
r
y
t
u
i
!
!
o
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
34
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Pour plus d'informations sur les connexions audio et
MIDI pour un MOTIF ES doté d'une carte mLAN16E,
reportez-vous aux exemples système fournis dans le
q Nickname (Surnom)
Ce champ indique le surnom de la carte
mLAN16E connectée. Pour modifier le surnom,
reportez-vous aux informations relatives aux
noeuds dans le manuel en ligne de mLAN
Graphic Patchbay.
Cliquez sur ce bouton pour connecter la carte
mLAN16E à l'ordinateur via mLAN.
w Model name (Nom du modèle)
Ce paramètre vous permet de sélectionner un
périphérique mLAN pour lequel vous souhaitez
effectuer une connexion mLAN dans un réseau
comportant plusieurs périphériques mLAN.
Une fois la carte mLAN16E connectée,
sélectionnez le nom du périphérique équipé de
cette carte.
! Bouton [Cancel] (Annuler)
et fermer mLAN Auto Connector.
Cliquez sur ce bouton pour ouvrir la fenêtre
mLAN16E Control Panel (Panneau de
configuration de la carte mLAN16E), qui vous
permet de définir la vitesse de transition de
l'horloge.
e Bouton [Update] (Mettre à jour)
Cliquez sur ce bouton pour mettre à jour les
informations relatives aux périphériques mLAN
connectés au réseau mLAN. Utilisez ce bouton
pour ajouter un périphérique mLAN au réseau
pendant l'exécution de mLAN Auto Connector.
Réglage de la vitesse de transition de
l'horloge (Panneau de configuration du
mLAN)
Lorsque vous cliquez sur le bouton [Setup]
dans la fenêtre Node Information (Infos
noeud) de mLAN Auto Connector ou de
mLAN Graphic Patchbay, l'ordinateur affiche
le panneau de configuration du mLAN dans
lequel vous pouvez définir la vitesse de
transition de l'horloge.
Le paramètre de vitesse de transition de
l'horloge vous permet de spécifier la vitesse
avec laquelle le réglage initial d'horloge
passe à un nouveau réglage si le périphérique
mLAN opère en tant qu'esclave dans le
réseau mLAN.
r Bouton [Identify] (Identifier)
Lorsque vous cliquez sur ce bouton, le voyant
ACTIVE de la carte mLAN16E clignote
pendant quelques secondes.
t Sample Rate (Taux d'échantillonnage)
Ce paramètre vous permet de spécifier la
fréquence d'échantillonnage (fréquence
d'horloge).
y Cases d'option Wordclock Master
(Horloge maître)
Ces cases vous permettent de spécifier
l'ordinateur ou la carte mLAN16E comme
horloge maître.
Slow (Lent) :
Dans la plupart des cas, sélectionnez cette
option.
u Mac → MOTIF ES
Fast (Rapide) :
Ce paramètre vous permet de spécifier le nombre
de canaux de données audio qui entrent au niveau
de la carte mLAN16E depuis la sortie audio de
l'ordinateur (sortie audio du pilote mLAN).
Sélectionnez cette option si le périphérique
qui opère en tant qu'horloge maître fait
référence à un code temporel, par exemple
MTC, qui modifie dès lors le réglage de
l'horloge.
i Mac ← MOTIF ES
Ce paramètre vous permet de spécifier le
nombre de canaux de données audio qui entrent
au niveau de l'ordinateur depuis la sortie de la
carte mLAN16E.
4
Cliquez sur [Connect]. Si le périphérique
mLAN est correctement connecté, mLAN Auto
Connector se ferme et les communications
mLAN démarrent.
•
Si la connexion échoue, redémarrez mLAN Auto
Connector, puis cliquez une nouvelle fois sur le
bouton [Connect]. Il n'est pas nécessaire de
redémarrer l'ordinateur.
•
Le nombre de canaux de transmission audio et de
ports MIDI varie en fonction des périphériques
compatibles mLAN16E.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration d'OMS
•
Si vous utilisez le mLAN sur votre Macintosh avec
une carte d'interface IEEE 1394 (FireWire) installée
en option, créez une nouvelle configuration Studio à
l'aide de OMS Setup disponible sur le CD-ROM
d'installation. Pour plus de détails, reportez-vous au
manuel OMS.
1
Double-cliquez sur le dossier « OMS », puis
« OMSSetup for YAMAHA ». Les fichiers
« i88X-mLAN », « MOTIF-ES-mLAN » et
« mLAN Generic 16 ports » s'affichent.
Copiez-le sur le disque dur de votre
ordinateur.
Les noms de paramètre (noms de
périphérique) des différents ports MIDI
apparaissent tels qu'indiqué ci-dessous
lorsque le fichier Studio Setup est chargé.
Sélectionnez le périphérique (port)
2
Pour connecter un i88X ou une carte
mLAN16E (avec MOTIF ES) à l'aide de mLAN
Auto Connector, double-cliquez sur « i88X-
mLAN » ou « MOTIF ES-mLAN ».
Pour connecter plusieurs périphériques mLAN
à l'aide de Graphic Patchbay ou connecter
une seule carte mLAN16E (sans MOTIF ES) à
l'aide de mLAN Auto Connector, double-
cliquez sur « mLAN Generic 16 Ports ». OMS
Setup démarre.
correspondant à l'application que vous utilisez.
Fonction du port du i88X (Auto Connector)
Port
MIDI
Nom du
périphérique
Fonction
Port MIDI du i88X
(conversion MIDI vers (de)
MIDI mLAN)
1
MIDI
Fonction des ports du MOTIF ES (Auto Connector)
3
Après avoir lancé OMS Setup, le fichier de
configuration du studio sur lequel vous avez
double-cliqué à l'étape 2 s'ouvre.
Port
MIDI
Nom du
périphérique
Fonction
Contrôle un générateur de
sons.
1
2
TG
PLG
Contrôle un plug-in.
Contrôle une station de
travail audionumérique
(DAW) ou un éditeur.
3
4
Remote B
Remote A
Si «
» n'apparaît pas à droite du nom du
Contrôle une station de
travail audionumérique
(DAW) ou un éditeur.
fichier de configuration, sélectionnez « Make
Current » (Activer) dans le menu « File » et
exécutez l'opération de sauvegarde.
La configuration du studio OMS est terminée.
Vous devez également paramétrer le port
OMS lorsque vous utilisez le logiciel.
Reportez-vous au mode d'emploi de votre
application.
•
Vous pouvez affecter un rôle à chaque port MIDI du
MOTIF ES. Cet exemple utilise des noms de
périphériques types.
Fonctions des ports dans mLAN Graphic Patchbay
et sur la carte mLAN16E (sans MOTIF ES)
Port
MIDI
Nom du
périphérique
Fonction
•
Double-cliquez sur l'icône du périphérique
mLAN ou lancez « MIDI Device Info... » (Infos sur
le périphérique MIDI) dans le menu « Studio »
en sélectionnant le périphérique mLAN pour
ouvrir la boîte de dialogue Device Info. Nous
vous recommandons de ne pas modifier
l'affectation des canaux déjà prise en charge par
l'application de configuration (mLAN Auto
Connector, etc.) pour une utilisation optimale
avec i88x et mLAN16E. Réinitialisez les
paramètres comme indiqué dans l'illustration
suivante si vous les avez modifiés par
inadvertance.
1
2
Port 1
Port 2
. . . .
Les fonctions des ports
varient selon le
périphérique mLAN
concerné. Reportez-vous
au mode d'emploi de votre
périphérique mLAN.
. . . .
16
Port 16
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
36
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Les numéros de ports dans la configuraiton du studio
« mLAN Generic 16 ports » correspondent aux
numéros indiqués dans la colonne « Connector
Name » dans mLAN Graphic Patchbay. Pour plus
d'informations sur Graphic Patchbay, reportez-vous
au manuel en ligne de Graphic Patchbay.
Une fois la configuration du studio OMS terminée,
votre ordinateur ne reconnaît plus que les
périphériques (MIDI) mLAN de Yamaha. Si vous
connectez d'autres instruments de musique via USB
ou que vous ajoutez un périphérique (MIDI) mLAN au
réseau alors que vous utilisez déjà OMS, vous devez
créer un fichier Studio Setup original. Pour plus de
détails, reportez-vous au manuel en ligne fourni avec
l'OMS.
•
Il est possible que le fichier de configuration du studio
OMS ne fonctionne pas même si vous avez suivi la
procédure ci-dessus, selon la version de votre
Macintosh/Mac OS. (Il est impossible de transmettre/
recevoir des données MIDI même lorsque la
configuration est disponible.) Dans ce cas, connectez
votre Macintosh au périphérique mLAN et suivez la
procédure suivante pour recréer le fichier de
configuration.
1
Lancez OMS Setup et sélectionnez « New
Setup » (Nouvelle configuration) dans le menu
« File » (Fichier).
2
La boîte de dialogue « OMS Driver Search »
(Recherche du pilote OMS) apparaît. Décochez
les cases « Modem » et « Printer » (Imprimante),
puis cliquez sur [Search] (Rechercher) pour
lancer la recherche de périphérique. Si l'opération
de recherche se déroule correctement, le
périphérique [mLAN-01] apparaît dans la boîte de
dialogue de configuration du pilote OMS.
3
Cliquez sur le bouton [OK] pour rechercher des
ports. Si vous utilisez le i88X ou la carte
mLAN16E, Port 1, Port 2 ... apparaît dans la boîte
de dialogue. Cochez la case du port approprié et
cliquez sur le bouton [OK] pour stocker la
configuration.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug-in Effect
1
2
3
Double-cliquez sur le dossier « Mac OS 9 ».
Le dossier « VST_ » s'affiche.
5
Cliquez sur [Continue]. Dans la fenêtre qui
apparaît, vous pouvez sélectionner le dossier
« VstPlugins » dans lequel installer l'effet
plug-in.
Double-cliquez sur le dossier « VST_ ». La
fenêtre « VST Plugin Installer » s'affiche.
Double-cliquez sur « VST Plugin Installer ».
Une fenêtre de sélection des effets plug-in
apparaît.
Dans la fenêtre, la zone « Install Location »
affiche la destination du mode d'emploi (fichier
PDF). Evitez de modifier l'emplacement de
destination. Sélectionnez (cochez) le logiciel à
installer.
4
Cliquez sur [Install]. Dans la fenêtre qui
apparaît, saisissez le nom d'utilisateur, le nom
de la société et le numéro de série.
•
•
S'il n'existe qu'un seul dossier « VstPlugins » sur
votre ordinateur, cette étape n'est pas
nécessaire. Passez à l'étape 7.
•
Vous pouvez trouver le numéro de série sur la
carte utilisateur fournie.
S'il n'y a pas de dossier « VstPlugins » sur votre
ordinateur, vous pouvez sélectionner
l'emplacement dans lequel installer l'effet plug-in
dans la fenêtre qui apparaît.
6
7
Cliquez sur [OK]. L'installation débute.
Lorsque l'installation est terminée, l'écran
suivant apparaît :
8
Pour terminer l'installation, cliquez sur [Quit].
Pour copier le module à un endroit autre que
celui sélectionné à l'étape 5 ci-dessus, cliquez
sur [Continue] et répétez la procédure à partir
de l'étape 3.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages de l'afficheur
Messages
Page
i88X (ou mLAN16E) introuvable sur le réseau mLAN.
Vérifiez que le i88X (ou mLAN16E) est sous tension et que le câble mLAN est
correctement branché et bien enfoncé. Redémarrez ensuite « mLAN Auto
Connector ».
19, 33
Impossible de modifier les paramètres de mLAN Driver.
1) Si une application utilisant le pilote est actuellement active, fermez-la, puis
modifiez les paramètres.
2) La mémoire ressource est insuffisante.
24
14
Echec de l'initialisation des paramètres du mLAN car l'application « mLAN Start »
n'est pas ouverte.
Sélectionnez « ON » dans le menu de l'application « mLAN Manager ».
Impossible de connecter la prise de sortie audio mLAN du i88X (ou mLAN16E) à la
prise d'entrée audio mLAN de l'ordinateur.
14, 19,
33
Impossible de connecter la prise de sortie MIDI mLAN du i88X (ou mLAN16E) à la
prise d'entrée MIDI mLAN de l'ordinateur.
14, 19,
33
Impossible de connecter la prise de sortie MIDI mLAN de l'ordinateur à la prise
d'entrée MIDI mLAN du i88X (ou mLAN16E).
14, 19,
33
Impossible de connecter la prise de sortie d'horloge mLAN de l'ordinateur à la prise
d'entrée d'horloge mLAN du i88X (ou mLAN16E).
14, 19,
33
Impossible de connecter la prise de sortie d'horloge mLAN du i88X (ou mLAN16E) à la 14, 19,
prise d'entrée d'horloge mLAN de l'ordinateur.
33
Une nouvelle carte adaptateur 1394 a été détectée.
Si vous avez introduit une nouvelle carte, redémarrez l'ordinateur.
La mémoire ressource est insuffisante.
Exécutez l'application mLAN Stop, puis mLAN Start. Si cela ne marche pas,
redémarrez l'ordinateur.
14
14
14
14
14
Carte adaptateur 1394 introuvable.
Vérifiez la carte et redémarrez le mLAN.
Un des programmes n'a pas pu être lancé. Suivez les instructions/messages de
l'application correspondante. Si aucun message ne s'affiche, exécutez à nouveau
mLAN Start ou redémarrez l'ordinateur.
L'application ne répond pas.
Exécutez à nouveau mLAN Start ou redémarrez l'ordinateur.
Echec du chargement pilote du bus mLAN.
Si l'Assistant Ajout de nouveau matériel détecté n'a pas été exécuté, utilisez-le pour
installer le matériel, puis exécutez mLAN Start.
Un ou plusieurs programmes n'ont pas pu être fermés.
Après avoir fermé tous les programmes DAW et les programmes utilisant le mLAN,
exécutez mLAN Stop.
14
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Dépistage des pannes
En cas de problème...
Si vous n'entendez aucun son ou un son étrange, vérifiez d'abord les éléments décrits ci-dessous et
agissez en conséquence. Si le problème persiste, consultez votre revendeur Yamaha.
I Communication via mLAN impossible.
• Le pilote est-il installé ? ..........................................................................................Voir page 12.
• Le câble mLAN est-il correctement branché ? Vérifiez la connexion, débranchez le câble mLAN,
puis rebranchez-le.
• (Pour Windows) Le mLAN est-il paramétré sur « ON » ? Dans la barre de tâches, cliquez avec le
bouton droit sur l'icône mLAN Manager.
...........................................................................................................Voir page 14.
sur l'icône mLAN Manager de la barre des tâches et sélectionnez « ON ». ..............Voir page 14.
• Le voyant ACTIVE situé sur le panneau arrière du périphérique mLAN est-il allumé (bleu) ? S'il ne
l'est pas, vérifiez les points suivants :
- Dans mLAN Driver Setup, le voyant d'état est-il bleu ? S'il ne l'est pas, relancez mLAN16E et
réactivez la connexion à l'aide de mLAN Auto Connector ou de mLAN Graphic Patchbay.
........... Reportez-vous à la page 19, à la page 33 ainsi qu'à la section « Réglages de
connexion mLAN » dans le manuel en ligne de mLAN Graphic Patchbay.
• La connexion a -t-elle été activée avec mLAN Auto Connector et/ou Graphic Patchbay ?
Réactivez la connexion si nécessaire.
........... Reportez-vous à la page 19, à la page 33 ainsi qu'à la section « Réglages de
connexion mLAN » dans le manuel en ligne de mLAN Graphic Patchbay.
• Avez-vous modifié le périphérique ? Même si le modèle est le même, si le périphérique en
question est différent, il est nécessaire de réactiver la connexion à l'aide de Auto Connector et/ou
Graphic Patchbay.
........... Reportez-vous à la page 19, à la page 33 ainsi qu'à la section « Réglages de
connexion mLAN » dans le manuel en ligne de mLAN Graphic Patchbay.
• La connexion est-elle en boucle ? Vérifiez le câblage et assurez-vous qu'aucun des périphériques
n'est connecté en boucle.
Exemple de connexion en boucle
Ordinateur
Ordinateur
Périphérique mLAN
Périphérique mLAN
: Périphérique équipé
d'une borne IEEE1394
• Il peut y avoir une limite sur l'interface IEEE 1394 de votre ordinateur quant au nombre de ports
pouvant être utilisés simultanément. Vérifiez le nombre de ports pouvant être utilisés en même
temps.
• Mettez tous les périphériques du réseau mLAN hors tension (à l'exception de l'ordinateur) et
rebranchez les périphériques un par un jusqu'à ce que vous ayez identifié le périphérique à
l'origine du problème.
• (Pour Windows) (En cas de retrait du bus mLAN à l'aide du paramètre [Safely Remove Hardware]
(Retrait du matériel en toute sécurité) de la barre de tâches.) Redémarrez l'ordinateur lorsque
vous décidez d'utiliser à nouveau le mLAN.
• Si vous utilisez un ordinateur portable Macintosh tel que iBook et PowerBook, connectez d'abord
le périphérique mLAN et le câble du mLAN, puis mettez le mLAN sous tension, avant d'allumer
l'ordinateur.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
40
Download from Www.Somanuals.com. All Manuals Search And Download.
• Vérifiez que l'horloge est correctement configurée. Vérifiez également qu'un noeud est affecté en
tant que maître et les autres en tant qu'esclaves.
........... Reportez-vous à la section « Réglages de connexion mLAN » dans le manuel
en ligne de mLAN Graphic Patchbay.
I La vitesse de traitement de l'ordinateur est trop faible.
I L'indicateur de niveau du processeur indique une charge de traitement
importante.
I La réponse de reproduction est lente.
• Si plusieurs périphériques compatibles S200 sont connectés au réseau, la connexion de
périphériques mLAN dans mLAN Graphic Patchbay peut nécessiter davantage de temps.
I Discordance d'horloge ou impossible de quitter Auto Connector.
• (Pour Windows) Ordinateurs portables avec processeur Intel
La technologie SpeedStep ™ s'applique à certains processeurs (processeur d'ordinateurs
portables). Veuillez désactiver la technologie SpeedStep ™ lorsque vous utilisez le système
mLAN. La technologie SpeedStep ™ modifie dynamiquement l'horloge du processeur en
fonction de la charge du système afin de réduire la consommation d'énergie.
- Pour désactiver la technologie SpeedStep ™ : sur la plupart des PC, le BIOS a pour fonction
de sélectionner l'activation ou la désactivation de la technologie SpeedStep ™. Reportez-vous
au manuel d'instructions de votre PC ou renseignez-vous auprès du fabricant de l'appareil.
I Impossible de modifier les réglages mLAN.
• (Pour Windows) Le pilote mLAN (WDM) est-il sélectionné en tant que périphérique audio par
défaut pour le système ?
- Sélectionnez [Démarrer | Panneau de configuration | Sons et périphériques audio | Voix].
Assurez-vous qu'une option autre que « mLAN Audio 01 » est sélectionnée pour les
paramètres [Lecture de la parole] et [Enregistrement vocal].
- Sélectionnez [Démarrer | Panneau de configuration | Sons et périphériques audio | Audio].
Assurez-vous qu'une option autre que « mLAN Audio 01 » est sélectionnée pour les
paramètres [Lecture audio] et [Enregistrement audio].
- Dans « MIDI music playback », sélectionnez une option autre que les options de la plage
« mLAN MIDI Out » à « mLAN MIDI Out (8) ».
• (Pour Windows) Sélectionnez [Démarrer | Panneau de configuration | Sons et périphériques
audio | Sons]. Sélectionnez ensuite « Aucun son » dans [Modèle de sons], puis exécutez à
nouveau.
• Si vous ne parvenez pas à sortir du mLAN (en sélectionnant « OFF » après avoir cliqué avec le
bouton droit sur l'icône mLAN de la barre de tâches), terminez les processus répertoriés
ci-dessous manuellement. ([Ctrl] + [Alt] + [Suppr.] ¡ onglet [Processus] ¡ sélectionnez le
processus ➝ [Terminer le processus]). Lorsque vous avez terminé, démarrez le mLAN Manager
pour modifier à nouveau les paramètres mLAN.
- mLANVDevice.exe
- mLANTFamily.exe
- mLANSoftPH.exe
- mLANManager.exe
• Pour modifier les réglages de mLAN, sélectionnez [Démarrer| (Tous les) Programmes |
Démarrage], puis démarrez mLAN Manager.
• (Lorsqu'un message du type « fichier introuvable » apparaît lors de la désinstallation :)
Essayez d'effectuer à nouveau l'installation, puis de relancer la procédure de désinstallation.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
41
Download from Www.Somanuals.com. All Manuals Search And Download.
I (Windows) mLAN Manager (l'icône mLAN dans la barre des tâches) a
disparu.
• Sélectionnez [Démarrer| (Tous les) Programmes | Démarrage (ou mLAN Tools)], puis sélectionnez
mLAN Manager.
I Un périphérique connecté mLAN n'est pas reconnu.
• Actualisez les informations en sélectionnant [View] (Affichage), puis [Update] (Mettre à jour)
dans la barre de menus. Si le périphérique n'est toujours pas reconnu, mettez le mLAN Manager
hors tension, puis redémarrez-le et sélectionnez ensuite [Update] (Mettre à jour (aux dernières
informations)). ....... Reportez-vous à la section « Démarrage de mLAN Graphic Patchbay » dans
le manuel en ligne de mLAN Graphic Patchbay.
I Le lancement ou la mise à jour de mLAN Graphic Patchbay peut
prendre un certain temps.
• Lorsque vous essayez de mettre à jour les informations réseau après avoir connecté ou
déconnecté un périphérique mLAN ne prenant pas en charge S400, le système règle la vitesse de
transfert mLAN et requiert davantage de temps pour traiter votre demande. Cependant, cela
n'affecte en rien les opérations ultérieures.
• Si cinq périphériques mLAN ou plus (ordinateur compris) ont été connectés à un réseau, le
nombre total de canaux de transmission de tous les périphériques sera limité. Vous pouvez
connecter jusqu'à 86 canaux dans Windows et jusqu'à 98 canaux dans un système Macintosh.
•
Pour plus d'informations sur les problèmes audio tels que l'absence de son ou les bruits excessifs, reportez-vous à la
section « Dépistage des pannes » des modes d'emploi respectifs des cartes i88X et mLAN16E.
Manuel d'installation de TOOLS for i88X/mLAN16E/Plug-in Effect
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE LICENSING AGREEMENT
The following is a legal agreement between you, the end user, and Yamaha Corporation (“Yamaha”). The
enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms
set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept
all terms outlined herein. If you do not agree to the terms, return this package unopened to Yamaha for a full
refund. In the event that you obtained the enclosed Yamaha software program(s) as a part of a software
package or software bundled with a hardware product, you may not return the enclosed Yamaha software
program(s) to Yamaha.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha grants you, the original purchaser, the right to use one copy of the enclosed software program and
data (“SOFTWARE”) on a single-user computer system. You may not use it on more than one computer or
computer terminal. The SOFTWARE is owned byYamaha and is protected by Japanese copyright laws and all
applicable international treaty provisions. You are entitled to claim ownership of the media in which the
SOFTWARE is included. Therefore, you must treat the SOFTWARE like any other copyrighted materials.
2. RESTRICTIONS
The SOFTWARE program is copyrighted. You may not engage in reverse engineer-ing or reproduction of the
SOFTWARE by other conceivable methods. You may not reproduce, modify, change, rent, lease, resell, or
distribute the SOFTWARE in whole or in part, or create derivative works from the SOFTWARE. You may not
transmit or network the SOFTWARE with other computers. You may transfer ownership of the SOFTWARE
and the accompanying written materials on a permanent basis provided that you retain no copies and the
recipient agrees to the terms of the licensing agreement.
3. TERMINATION
The licensing condition of the software program becomes effective on the day that you receive the
SOFTWARE. If any one of the copyright laws or clauses of the licensing conditions is violated, the licensing
agreement shall be terminated automatically without notice from Yamaha. In this case, you must destroy the
licensed SOFTWARE and its copies immediately.
4. PRODUCT WARRANTY
Yamaha warrants to the original purchaser that if the SOFTWARE, when used in normal conditions, will not
perform the functions described in the manual provided by Yamaha, the sole remedy will be that Yamaha will
replace any media which proves defective in materials or workmanship on an exchange basis without charge.
Except as expressly set forth above, the SOFTWARE is provided “as is,” and no other war-ranties, either
expressed or implied, are made with respect to this software, including, without limitation the implied
warranties of merchantability and fitness for a particular purpose.
5. LIMITED LIABILITY
Your sole remedies and Yamaha’s entire liability are as set forth above. In no event will Yamaha be liable to
you or any other person for any damages, including without limitation any incidental or consequential
damages, expenses, lost profits, lost savings or other damages arising out of the use or inability to use such
SOFTWARE even if Yamaha or an authorized dealer has been advised of the possibility of such damages, or
for any claim by any other party.
6. GENERAL
This license agreement shall be interpreted according to and governed by Japanese laws.
TOOLS for i88X/mLAN16E, Plug-in Effect Manuel d’installation
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE-LIZENZVEREINBARUNG
Die folgende Vereinbarung ist eine rechtsgültige Vereinbarung zwischen Ihnen, dem Endanwender, und der
Yamaha Corporation (“Yamaha”). Yamaha erteilt dem ursprünglichen Käufer für das beiliegendeYamaha-Soft-
wareprogramm ausschließlich zu den hier ausgeführten Bedingungen eine Lizenz zurVerwendung. Bitte lesen
Sie diese Lizenzvereinbarung sorgfältig. Durch das Öffnen dieser Packung bringen Sie zumAusdruck, dass Sie
alle darin enthaltenen Bedingungen akzeptieren. Wenn Sie nicht mit den Bedingungen einverstanden sind, kön-
nen Sie die Packung ungeöffnet an Yamaha zurückgeben; der Kaufpreis wird in voller Höhe zurückerstattet.
Falls Sie das mitgelieferte Softwareprogramm bzw. die mitgelieferten Softwareprogramme vonYamaha als Teil
eines Softwarepakets oder im Paket mit einem Hardwareprodukt erworben haben, sind Sie nicht berechtigt, das
mitgelieferte Softwareprogramm bzw. die mitgelieferten Softwareprogramme anYamaha zurückzugeben.
1. ERETILUNG VON LIZENZ UND COPYRIGHT
Yamaha erteilt Ihnen, dem ursprünglichen Käufer, das Recht, ein Exemplar des beiliegenden Softwarepro-
gramms und der darin enthaltenen Daten (“SOFTWARE”) als Einzelperson auf jeweils einem Computer zu
verwenden. Sie dürfen sie nicht auf mehr als einem Computer bzw. einer Computerstation verwenden. Die
SOFTWARE bleibt im Besitz vonYamaha und ist durch japanische Copyrightgesetze sowie alle anwendbaren
internationalen Vertragsbestimmungen geschützt. Sie haben ein Anspruchsrecht auf das Eigentum an den
Medien, denen die SOFTWARE beiliegt. Daher müssen Sie die SOFTWARE wie alle anderen durch Copy-
right geschützten Materialien behandeln.
2. EINSCHR
Die SOFTWARE ist durch Copyright geschützt. Sie dürfen Sie weder analysieren noch durch anderweitige
Methoden reproduzieren. Sie dürfen die SOFTWARE weder ganz noch teilweise reproduzieren, modifizieren,
verändern, gegen Entgelt oder unentgeltlich verleihen, verkaufen oder vertreiben, und Sie dürfen auf der
Grundlage der SOFTWARE keine Ableitungen erstellen. Sie dürfen die SOFTWARE nicht an andere Compu-
ter senden oder in Netzwerke einspeisen. Sie dürfen das Eigentum an der SOFTWARE und den schriftlichen
Begleitmaterialien auf unbefristeter Basis unter den Voraussetzungen übertragen, daß Sie keine Kopien
zurückbehalten und sich der Empfänger mit den Bedingungen der Lizenzvereinbarung einverstanden erklärt.
3. BEENDIGUNG
Die Lizenzbedingung des Softwareprogramms wird am Tag, an dem Sie die SOFTWARE erhalten, wirksam.
Falls ein Copyrightgesetz oder eine Bestimmung der Lizenzbedingungen verletzt wird, wird automatisch und
ohne Benachrichtigung durch Yamaha die Lizenzvereinbarung beendet. In diesem Fall müssen Sie die lizen-
sierte SOFTWARE und ihre Kopien unverzüglich vernichten.
4. PRODUKTGARANTIE
Yamaha garantiert dem ursprünglichen Käufer, daß, falls die SOFTWARE bei Verwendung unter normalen
Bedingungen nicht die in der von Yamaha bereitgestellten Anleitung beschriebenen Funktionen erfüllt, die
einzige Abhilfe darin bestehen wird, daß Yamaha auf Austauschbasis kostenlos jedes Medium ersetzen wird,
das Material- oder Verarbeitungsfehler aufweist. Abgesehen von dem oben Ausgeführten wird die SOFT-
WARE “wie die Ware liegt und steht” geliefert, und es werden keine anderen ausdrücklichen oder stillschwei-
genden Garantien hinsichtlich dieser Software übernommen, einschließlich, aber nicht beschränkt auf, die
stillschweigenden Garantien für handelsübliche Qualität und Eignung für einen bestimmten Einsatzzweck.
5. BESCHR
Ihre einzige Abhilfe und die gesamte HaftungYamahas bestehen in dem oben Ausgeführten. Keinesfalls haftet
Yamaha Ihnen oder einer anderen Person gegenüber für etwaige Schäden, einschließlich, aber nicht
beschränkt auf, zufällige Schäden oder Folgeschäden, Kosten, Verdienstausfall, verlorene Ersparnisse oder
andere Schadenersatzansprüche, die aus der Verwendung der SOFTWARE oder aus der Tatsache hervorgehen,
daß diese SOFTWARE nicht verwendet werden konnte, selbst wenn Yamaha oder ein autorisierter Händler
über die Möglichkeit derartiger Schadenersatzansprüche informiert wurde, oder für etwaige andere Ansprüche
einer anderen Partei.
6. ALLGEMEINES
Diese Lizenzvereinbarung soll gemäß und in Übereinstimmung mit den japanischen Gesetzen ausgelegt werden.
TOOLS for i88X/mLAN16E, Plug-in Effect Installationshandbuch
44
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTRAT DE LICENCE DE LOGICIEL
Ceci est un contrat entre vous-même, l’utilisateur final, et Yamaha Corporation (« Yamaha »). Le logiciel
Yamaha ci-inclus est concédé sous licence parYamaha à l’acheteur original et ne peut être utilisé que dans les
conditions prévues aux présentes. Veuillez lire attentivement ce contrat de licence. Le fait d’ouvrir ce coffret
indique que vous acceptez l’ensemble des termes du contrat. Si vous n’acceptez pas lesdits termes, renvoyez le
coffret non ouvert à Yamaha pour en obtenir le remboursement intégral. Si vous avez obtenu le(s)
programme(s) logiciel(s) Yamaha inclus avec un package ou fourni(s) avec un produit matériel, vous ne
pouvez pas le(s) renvoyer à Yamaha.
1. CONCESSION DE LICENCE ET DROITS D’AUTEUR
Yamaha vous concède le droit d’utiliser, en tant qu’acheteur original, un exemplaire du logiciel et des données
afférentes à celui-ci (« LOGICIEL ») sur un ordinateur pour utilisateur unique. Vous n’êtes pas autorisé à
utiliser ces éléments sur plus d’un ordinateur ou terminal d’ordinateur. Le LOGICIEL est la propriété de
Yamaha. Il est protégé par les dispositions relatives au droit d’auteur contenues dans la législation japonaise et
les traités internationaux. Vous êtes en droit de revendiquer l’appartenance du support du LOGICIEL. A ce
titre, vous devez traiter le LOGICIEL comme tout autre élément protégé par le droit d’auteur.
2. RESTRICTIONS
Le LOGICIEL est protégé par le droit d’auteur. Vous n’êtes pas autorisé à reconstituer la logique du
LOGICIEL ou à reproduire ce dernier par quelque autre moyen que ce soit. Vous n’êtes pas en droit de
reproduire, modifier, prêter, louer, revendre ou distribuer le LOGICIEL en tout ou partie, ou d’utiliser le
LOGICIEL à des fins de création dérivée. Vous n’êtes pas autorisé à transmettre le LOGICIEL à d’autres
ordinateurs ou à l’utiliser en réseau. Vous êtes en droit de céder, à titre permanent, le LOGICIEL et la
documentation imprimée qui l’accompagne, sous réserve que vous n’en conserviez aucun exemplaire et que le
bénéficiaire accepte les termes du présent contrat.
3. RESILIATION
Les conditions énoncées dans le présent contrat de licence prennent effet à compter du jour où le LOGICIEL
vous est remis. Si l’une quelconque des dispositions relatives au droit d’auteur ou des clauses du contrat ne
sont pas respectées, le contrat de licence sera résilié de plein droit par Yamaha, ce sans préavis. Dans ce cas,
vous devrez immédiatement détruire le LOGICIEL concédé sous licence ainsi que les copies réalisées.
4. GARANTIE PRODUIT
Si, dans des conditions normales d’utilisation, le LOGICIEL ne remplit pas les fonctions décrites dans le
manuel fourni, Yamaha s’engage vis-à-vis de l’acheteur original à remplacer gratuitement, sur la base d’un
échange, tout support reconnu défectueux par suite d’un défaut de matière première ou d’un vice de
fabrication. Ceci constitue le seul recours opposable à Yamaha. Hormis dans les cas expressément énoncés
plus haut, le LOGICIEL est livré « en l’état » et toute autre garantie expresse ou implicite le concernant, y
compris, de manière non limitative, toute garantie implicite de qualité marchande et d’adéquation à un usage
particulier, est exclue.
5. RESPONSABILITE LIMITEE
Votre unique recours et la seule responsabilité de Yamaha sont tels qu’énoncés précédemment. En aucun cas
Yamaha ne pourra être tenu responsable, par vous-même ou une autre personne, de quelques dommages que
ce soit, notamment et de manière non limitative, de dommages indirects, frais, pertes de bénéfices, pertes de
fonds ou d’autres dommages résultant de l’utilisation ou de l’impossibilité d’utiliser le LOGICIEL, même si
Yamaha ou un distributeur agréé ont été prévenus de l’éventualité de tels dommages, ou de quelque autre
revendication formulée par une tierce partie.
6. REMARQUE GENERALE
Le présent contrat de licence est régi par le droit japonais, à la lumière duquel il doit être interprété.
TOOLS for i88X/mLAN16E, Plug-in Effect Manuel d’installation
45
Download from Www.Somanuals.com. All Manuals Search And Download.
This document is printed on chlorine free (ECF) paper with soy ink.
Auf Umweltpapier mit Sojatinte gedruckt.
Ce document a été imprimé sur du papier non blanchi au chlore avec de l'encre d'huile de soja.
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2004 Yamaha Corporation
403APAP1.3-01A0 Printed in Japan
WD20700
Download from Www.Somanuals.com. All Manuals Search And Download.
|