Download from Www.Somanuals.com. All Manuals Search And Download.
Laser Product Class: Class 1
Laser Diode Properties
Wavelength: 780 – 787 nm
Pulse Durations and Max. Output
at the lens of the Laser Pickup Unit
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
Read Mode: 0.85 mW
Write Mode: Max. 48 mW
(Continuous)
ACHTUNG
Halten Sie sich beim Bedienen und Einstellen der
Bedienungselemente sowie bei der Bedienungsabfolge
an die Anleitung, da sonst gefährliche Strahlen austreten
können.
(for 212 ns, Min. Cycle 57.9 ns)
Laserprodukt-Klasse: Klasse 1
Eigenschaften der Laserdiode
Wellenlänge: 780 – 787 nm
ATTENTION
L’emploi de commandes, de réglages ou un choix de
procédures différents des spécifications de cette
brochure peut entraîner une exposition à d’éventuelles
radiations pouvant être dangereuses.
Impulsdauer und max. Ausgang an der Linse der
Laser-Abtasteinheit
Lesemodus: 0,85 mW
Schreibmodus: Max. 48 mW
(für 212 ns, Zyklusmin. 57,9 ns)
(kontinuierlich)
PRECAUCION
El usar los controles o ajustar o realizar procedimientos
diferentes a los especificados aquí resultará en
peligrosas exposiciones a la radiación.
Classe du produit laser: Classe 1
Caractéristiques de la diode laser
Longueur d’onde: 780 – 787 nm
Durée des impulsions et sortie maximum depuis
la lentille du bloc capteur optique
VARO!
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTINA NÄKYMÄTTÖMÄLLE
Mode de lecture: 0,85 mW
(continue)
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
Mode de gravure: max. 48 mW
VARNING! OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR
ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
(pour 212 ns, cycle min. 57,9 ns)
BETRAKTA EJ STRÅLEN. STRÅLEN ÄR FARLIG.
Clase de producto láser: Clase 1
Propiedades del diodo láser
Longitud de onda: 780 – 787 nm
Duración del pulso y potencia de salida máxima
en el objetivo de la unidad captora láser
Modo de lectura: 0,85 mW
Modo de escritura: máx. 48 mW
(para 212 ns, ciclo mínimo 57,9 ns)
CAUTION
VARNING
VARO !
-
-
VISIBLE AND / OR INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA / TAI
NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
(continua)
VARNING
-
VORSICHT ! SICHTBARE UND / ODER UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
ATTENTION - RADIATION VISIBLE ET / OU INVISIBLE LORSQUE L’APPAREIL
EST OUVERT. EVITEZ TOUTE EXPOSITION AU FAISCEAU.
DANGER - VISIBLE AND / OR INVISIBLE LASER
RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE
TO BEAM.
CLASS
LASER KLASSE
LUOKAN LASERLAITE
1
LASER PRODUCT
1
PRODUKT
1
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE
1
COMPLIES WITH 21 CFR CHAPTER 1, SUBCHAPTER J.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
OWNER’S MANUAL
i
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
PLEASE READ THE FOLLOWING WARNINGS AND CAUTIONS CAREFULLY TO
PREVENT PERSONAL INJURY AND DAMAGE TO THE DEVICE.
These precautions explain how to use the device properly and safely, thereby preventing
injury to yourself and others. This section has been sub-divided into a WARNING section
and a CAUTION section, according to the likelihood and nature of any potential injuries or
damage inflicted. They relate to your personal safety, and also help you prevent the risk
of damage to the device. Please read these sections carefully prior to proceeding.
WARNING
Always follow these basic precautions to avoid short-circuit, damage, fire, or other
hazards, and to avoid serious injury or fatal accident from electrical shock.
G Do not attempt to open or disassemble the device to avoid the risk of electrical shock,
fire, or malfunction.
G Do not look directly at the laser source to avoid the risk of eye damage or blindness.
G Do not insert fingers or foreign objects into the device to avoid the risk of electrical
shock, fire, malfunction, or personal injury.
G Do not expose the device to high humidity or place liquid containers such as a flower
vase on the device to avoid the risk of electrical shock, fire, or malfunction.
G Do not expose the device to temperature outside the range 5 – 35 °C (41 – 95 °F) to
avoid the risk of fire, deformation of the device panel, or malfunction.
G Do not expose the device to dusty place to avoid the risk of fire or malfunction.
G Always follow the owner’s manual to set up or connect the devices properly to avoid
the risk of electrical shock, fire, malfunction, or personal injury.
G If unusual smells, sounds or smoke come from the device, or if foreign objects such
as liquid get into the device, turn off and unplug the computer immediately to avoid
the risk of electrical shock, fire, or malfunction. Contact the store of purchase or your
nearest Yamaha dealer (listed at the back of this manual).
G Be sure that the computer is electrically grounded to avoid the risk of electrical shock.
G Prior to cleaning the drive, always unplug the computer or do not handle the plug with
wet hands to avoid the risk of electrical shock.
G Use the included AC adapter to avoid the risk of fire or malfunction.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
G Clean the AC power plug regularly to avoid the risk of fire due to insulation failure
such as humidity.
G Do not unplug the AC adapter by pulling the cable, and do not place objects on the
cable to avoid the risk of electrical shock, fire, or malfunction.
G Plug in the AC adapter fully to avoid the risk of electrical shock or fire.
G Do not connect many devices to an electrical outlet. Maintain the rated power of the
outlet to avoid the risk of fire due to overheating.
CAUTION
Always follow these basic precautions to avoid physical injury to yourself or others,
and damage to the device or other property.
G Always unplug the computer if it will not be used for a prolonged period or if there is a
possibility of lightning, to avoid the risk of electrical shock, fire, or short-circuit.
G Do not use the device near other electrical appliances such as televisions, radios, or
speakers to avoid the risk of interferences between each other.
G Do not place the device unstably to avoid the risk of malfunction or personal injury by
its falling down.
G Do not place the device with a possibility of excessive vibration to avoid the risk of
damage to written data or malfunction.
G Place the device horizontally to avoid the risk of damage to written data.
G Prior to transporting the device, remove the disc from the disc tray to avoid the risk of
damage to written data.
G Use soft, dry cloths to wipe the device. Do not use benzene, paint thinner, detergents,
or chemically treated wiped cloths, and do not place vinyl, plastic, or rubber objects
on the device to avoid the risk of malfunction or damage to the surface of the device.
G Do not rest your weight on or place heavy objects on the device, and do not apply
excessive force to the buttons, switches, or connectors to avoid the risk of damage to
the device or personal injury.
G Be careful not to short-circuit the AC power plug with metal objects to avoid the risk of
malfunction.
G Do not wrap the power cable around the AC adapter to avoid the risk of breaking the
wire or malfunction.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
G Do not listen to audio with headphones at high volume for prolonged period to avoid
auditory disorder.
G Prior to turning on the computer, always minimize the volume to avoid auditory
disorder by a sudden burst of sound at high volume.
G Do not place the device near magnets or anything magnetized such as a display to
avoid the risk of interferences between each other.
G Have the device serviced regularly to avoid internal dust buildup that can cause
malfunction, damage or fire. For service information and service charges, contact the
store of purchase or your nearest Yamaha dealer (listed at the back of this manual).
WARRANTY
YAMAHA AND ITS SUPPLIERS ACCEPT NO LIABILITY FOR ANY PROBLEMS THAT OCCUR AS A
RESULT OF ANY OPERATIONS CARRIED OUT OTHER THAN THOSE STATED IN THE MANUAL
THAT COMES WITH THIS PRODUCT, OR THE LOSS OR THE DAMAGE OF ANY DATA CAUSED AS
A RESULT OF USING THIS PRODUCT.
Precautions for Transportation
Transporting the device unfixed may damage its internal mechanism or circuits.
• Remove the disc from the disc tray of the device.
• Put the device in the original box.
Refer to the original box to check that the complete accessories are included prior to installation.
• ©2001 YAMAHA CORPORATION. All Rights Reserved.
• This document may not, in whole or in part, be copied, photocopied, reproduced, translated,
transmitted, or reduced to any electronic medium of machine readable form without prior consent
in writing from Yamaha.
• Windows is a registered trademark of Microsoft Corporation.
• Apple, Macintosh, and Mac OS are registered trademarks of Apple Computer, Inc.
• SafeBurn™ is a trademark of Yamaha Corporation.
• All other trademarks are the property of their respective companies. ™ and ® marks are not
specified in this manual.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Discs ........................................................................................4
Copyright.................................................................................................4
Compatible Discs.....................................................................................5
1 Set up the CRW3200SX Drive............................................................9
2 Connect the CRW3200SX Drive.......................................................12
3 Check Recognition of the CRW3200SX Drive.................................16
4 Install CD Writing Software..............................................................19
Loading/Ejecting a Disc ...........................................................20
Troubleshooting.....................................................................22
Firmware.............................................................................29
CRW3200SX Drive Specifications................................................30
Technical Notes.....................................................................34
Buffer Underrun Protection Function....................................................34
Writing Methods....................................................................................34
For details about how to install and use the CD writing software, refer to the
documentation that comes with it.
• The information contained in this manual is subject to change without prior notice.
• Reproduction of this manual, either in part or in full, is expressly forbidden.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Features of the CRW3200SX Drive
High speed writing/reading
The CRW3200SX drive supports up to 24X-speed writing for CD-R discs, and up to
10X-speed writing/rewriting for CD-RW discs. In addition, the drive supports data
reading and digital audio data extraction at up to 40X speed.
Tip
• The Partial CAV method permits 24X-speed writing for CD-R discs.
• The CLV method and the 4X – 10X Full CAV method permit 10X-speed writing/
rewriting for CD-RW discs.
SafeBurn™ (Enhanced stability writing technology)
The generous 8 MB buffer memory provides sufficient data storage to enable stable
disc writing at high speeds. Even if data transfer from the computer is interrupted,
Buffer Underrun Protection is activated to save CD-R discs from a writing error.
(P. 34)
“Optimum Write Speed Control” adjusts the writing speed to the optimum rate for
every CD-R disc automatically. You can set the maximum writing speed with your
CD writing software.
Note
• “Optimum Write Speed Control” can be activated when the maximum writing speed
is set at 12X or more.
• The minimum writing speed to be automatically selected is 8X. Manually set the
optimum writing speed if a writing speed supported by a disc is less than 8X.
High fidelity digital audio
The CRW3200SX drive supports extraction of digital audio data at up to 40X speed
using CD writing software, as well as recording digital audio with high fidelity even
at 24X-speed writing.
Audio Master Quality Recording (High quality audio writing mode)
Audio Master Quality Recording enables you to create high quality audio CDs. This
mode is available for CD-R discs with a capacity of 650 MB and 700 MB. (P. 35)
Note
Audio CDs that are created with Audio Master Quality Recording may not be played
back on certain audio recorders and CD-R/RW drives.
CD-MRW (CD Mount Rainier ReWriting)
CD-MRW is a new standard of packet writing. Compared to the ordinary packet
writing, CD-MRW provides many useful functions such as background formatting.
(P. 35)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of Parts
Front Panel
G
G
G
G
G
G
G Disc tray
G LED
Holds the disc. It is opened or closed by
pressing the eject button. (P. 20)
Indicates the operational status of the
CRW3200SX drive by its colors and
blinking patterns.
G Manual eject hole
Lights or blinks blue
Forcibly opens the disc tray when the tray
cannot be opened by pressing the eject
button. (P. 21)
• Lights: Standby (with disc)
• Blinks: Opening/Closing disc tray, or
reading disc information (TOC)
• Blinks rapidly: Playback audio
• Blinks irregularly: Reading data
G Eject button
Press to open or close the disc tray. (P. 20)
Lights or blinks purple
• Lights: Standby (no disc) or the disc tray
is open
• Blinks: Accessing for writing or test
writing
G Headphone jack
Connects headphones or external speakers
to the drive; has stereo mini-jack
specifications.
G Headphone volume dial
• Blinks rapidly: Writing
Controls the volume of the headphones.
The volume increases as the dial is turned
to the right.
Blinks orange
• Malfunction
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of Parts
Rear Panel
G
G
G
G
G
G LINE OUT jacks (L/R)
G SCSI connectors
Connect audio devices such as external
speakers.
Connect the SCSI cable. (P. 12)
D-sub half-pitch 50-pin pin-type is used.
(P. 13)
G Power switch (STANDBY/ON)
G Dip switch
Turns the power on/off. (P. 12, 15)
Sets the SCSI ID number and the
terminator. (P. 9)
G DC-IN connector
Connects the included AC adapter. (P. 14)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions on Use
Handling Discs
To avoid trouble, such as writing errors, loss of recorded data, and malfunction of
the drive, take the following precautions when handling discs.
• Do not place discs in a hot or damp place or where they will be exposed to direct
sunlight.
• Do not touch the disc surface. Hold the disc by the edge when handling it.
• Remove dust and dirt from the disc surface. Use an air spray to remove dust. The
disc surface may be scratched if strongly wiped with a dry cloth.
• Do not stick labels to the disc surface or write anything on it except where
designated.
• Do not clean discs with chemicals or detergents.
• Do not bend or drop discs.
Copyright
It is prohibited by law to duplicate copyright material for non-personal use without
the prior consent of the copyright holder. When copying material with your CD-R/
RW drive, take due care not to infringe the copyright.
Disclaimer of Indemnity
• Yamaha assumes no liability for the loss of any profits incurred as a result of the
loss or corruption of data written on a CD-R or CD-RW, for any loss or damage
caused by or arising out of extraordinary circumstances (including circumstances
that Yamaha has foreseen or could foresee), nor for any damages incurred or
claimed by a third party.
• After handling important data, make a comparison between the original and the
copied data (to confirm that the data has been copied properly).
• In no event shall Yamaha be liable for any damage to discs due to a buffer
underrun error (P. 34) or for any other reason, or the inability to use distributed
discs with your drive.
• Yamaha assumes no liability for the inability to write/playback discs because of
their format.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions on Use
Compatible Discs
Discs that can be written on
The CRW3200SX drive can write on the following discs.
For the latest information about discs previously checked for compatibility with the
drive, refer to the following website.
YAMAHA CD-R/RW Drive website
CD-R discs
• The CRW3200SX drive can write at 1X, 2X, 4X, 8X, 12X, 16X or 24X speed.
• CD-R discs can be played back on a CD-ROM drive or a CD player.
Note
• 24X-speed writing is enabled with Partial CAV method. (P. 6)
• Check the writing speeds your disc supports prior to writing.
CD-RW discs
• The CRW3200SX drive can write/rewrite at 2X or 4X speed.
supports “CD-RW” discs.
Note
Some discs support only 2X speed.
High Speed CD-RW discs
• The CRW3200SX drive can write/rewrite at 4X, 8X or 10X speed.
• High Speed CD-RW discs can be read/played back on a CD-RW drive that
bears the High Speed CD-RW logo or a device (e.g. CD-ROM drive) that
supports “CD-RW” discs.
Note
• When using the packet writing method (P. 35) for writing/rewriting onto High
Speed CD-RW discs, you can select the 4X – 10X Full CAV method. For more
information refer to the documentation that comes with your CD writing software.
(Your CD writing software must support the Full CAV method, as does the CD
Writing software that comes with the CRW3200SX drive.)
• The Full CAV method is recommended when opening and editing a file on a CD-
RW disc with an application software.
• In order to write, erase, read or play back High Speed CD-RW discs, use a CD-R/
RW drive that bears the High Speed CD-RW logo. When using a CD-ROM drive
to read/play back High Speed CD-RW discs, use a drive that supports CD-RW
discs.
If these discs are used with a CD-R/RW drive not bearing the High Speed CD-RW
logo, the discs may not be recognized, resulting in a computer not operating
properly or other malfunctions occurring.
Refer to the YAMAHA website below prior to attempting to read/play back these
discs on a YAMAHA CD-R/RW drive not bearing the High Speed CD-RW logo.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Partial CAV (Constant Angular Velocity)
The CLV (Constant Linear Velocity) method is generally used to write data on a CD-R
disc. In writing using the CLV method, the disc rotation speed is adjusted to keep the data
writing speed (data transfer rate) constant on all parts of the disc.
In contrast, the CAV (Constant Angular Velocity) method exercises control so as to keep
the disc rotation speed constant. Since the CAV method makes it possible to substantially
increase the maximum data transfer rate without straining of the drive, it is adopted today
for most CD-ROM drives.
CD formats define the constant linear density of written data so that the amount of written
data per disc rotation will increase as the writing point moves from the inner track to the
outer track.
With the CAV method, therefore, data is transferred at a higher rate when it is written on
the outer tracks of the disc. To achieve 24X-speed writing, the CRW3200SX drive
employs the Partial CAV method, which is a combination of the CAV method for inner
tracks and the CLV method for outer tracks.
The Partial CAV method controls the disc rotation speed so that the CRW3200SX drive
starts writing at 18X speed on inner tracks, increasing the speed to 24X as the read/write
head moves outward and holds the speed at 24X on outer tracks.
Tip
The CRW3200SX drive supports 8 cm discs.
Note
Use only circular discs. Do not use any irregular shaped discs such as heart-shaped or
star-shaped discs to avoid the risk of malfunction.
System Requirements
The CRW3200SX drive is designed to operate in the following computer
environment. If your computer does not meet these requirements, the CRW3200SX
drive may not operate or write at the maximum speed.
For Windows
Computer (PC/AT compatible)
• CPU: Pentium II-class or higher, 300 MHz or faster
• RAM: 32 MB (64 MB or more is recommended)
64 MB or more is required (128 MB is recommended) for Windows 2000
Professional, while 128 MB or more is required (256 MB is recommended) for
Windows XP.
Continued on next page
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions on Use
• Hard drive space
Writing data on a CD-R/RW disc requires 50 MB to 100 MB of free space as a
working area on the hard drive. When writing data on a CD-R/RW disc after
creating an image file, there must be enough free space on the hard drive to store
the image file in addition to the working area (a total of up to 900 MB).
However, hard drive space for image files is not required when directly writing
onto a CD-R/RW disc from a hard drive or CD-ROM using the CRW3200SX
drive (on-the-fly writing).
Image file
You can collect the data files to be written on a CD-R/RW disc into a single image file.
The image file is useful for writing the same data onto multiple discs. For details, refer
to the documentation that comes with the CD writing software.
• A spare PCI expansion slot for a SCSI card (if one hasn’t been installed or built-
in)
• SCSI card
SCSI is a standard to connect a computer and peripheral devices.
An optional SCSI card is required to connect the CRW3200SX drive for the
computer without a SCSI connector.
Adaptec’s AHA-2940 series SCSI cards (for PCI slot) are recommended.
For the latest information about SCSI cards supporting the CRW3200SX drive,
refer to the following websites.
YAMAHA CD-R/RW Drive website
Operating system
Windows 95 (OSR2 or later), Windows 98, Windows 98 Second Edition,
Windows Me, Windows 2000 Professional, Windows XP
CD writing software
The CRW3200SX drive requires CD writing software to write onto a CD-R/RW
disc. Use the CD writing software that supports the CRW3200SX drive.
For details about installing and using the CD writing software, refer to the
documentation that comes with the CD writing software.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
For Macintosh
Computer (Macintosh)
• CPU: PowerPC G3, 300 MHz or faster
• RAM: 32 MB (64 MB or more is recommended)
• CD-ROM drive
Note
The CRW3200SX drive cannot be used to boot the computer or to set up an operating
system.
• Hard drive space
Writing data on a CD-R/RW disc requires 50 MB to 100 MB of free space as a
working area on the hard drive. When writing data on a CD-R/RW disc after
creating image file, there must be enough free space on the hard drive to store the
image file in addition to the working area (a total of up to 900 MB).
However, hard drive space for image file is not required when directly writing
onto a CD-R/RW disc from hard drive or CD-ROM using the CRW3200SX drive
(on-the-fly writing).
Image file
You can collect the data files to be written on a CD-R/RW disc into a single image file.
The image file is useful for writing the same data onto multiple discs. For details, refer
to the documentation that comes with the CD writing software.
• A spare PCI expansion slot for a SCSI card (if one hasn’t been installed or built-in)
• SCSI card
SCSI is a standard to connect a computer and peripheral devices.
An optional SCSI card is required to connect the CRW3200SX drive for the
computer without a SCSI connector.
Adaptec’s PowerDomain 2930 SCSI cards (for PCI slot) are recommended.
For the latest information about SCSI cards supporting the CRW3200SX drive,
refer to the following websites.
YAMAHA CD-R/RW Drive website
Operating system
Mac OS 8.1, 8.5, 8.6 and 9 to 9.2 (Classic API with Mac OS X is not supported.)
CD writing software
The CRW3200SX drive requires CD writing software to write onto a CD-R/RW
disc. Use the CD writing software that supports the CRW3200SX drive.
For details about installing and using the CD writing software, refer to the
documentation that comes with the CD writing software.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the CRW3200SX Drive
Serial Number
The serial number is printed on the label on the bottom of your CRW3200SX drive.
When you have a question about the drive or need user support services, the serial
number is required.
Please write the serial number down in the space below. It may be difficult to check
the serial number after setting up the drive or for any other reason.
Serial number
(10 characters: 3 letters +
7 numbers)
Serial Number
1 Set up the CRW3200SX Drive
Prior to connecting the CRW3200SX drive to the computer, set up the following
using the dip switch on the rear panel of the drive.
G SCSI ID Number
G Termination
Rear panel
Dip switch
ID SELECT
TERMINATOR
1 24
9
Download from Www.Somanuals.com. All Manuals Search And Download.
G SCSI ID Number
Each of the SCSI devices connected to the computer needs to be identified by its
own SCSI ID number from “0” to “7.” The SCSI ID number “7” is normally
reserved for the SCSI card. Therefore, assigning a SCSI ID number from “0” to
“6,” except for the ID numbers in use by other SCSI devices, to the CRW3200SX
drive is recommended.
The dip switch of the CRW3200SX has four switches, and use SW 1, SW 2, and
SW 3 (three switches from the left) to set the SCSI ID number. The switches are
set to ON when pulled down. Each switch set to ON counts each ID SELECT
number, and the sum total of the ID SELECT number determines SCSI ID number
as the SCSI ID table shown below.
SCSI ID 0
SCSI ID 4
SCSI ID
SCSI ID 1
(default)
SCSI ID 2
SCSI ID 3
OFF
ON
OFF
ON
OFF
ON
OFF
ON
SCSI ID 5
SCSI ID 6
SCSI ID 7∗
OFF
ON
OFF
ON
OFF
ON
OFF
ON
SW 1
(ID SELECT: 1)
SW 2
(ID SELECT: 2)
SW 3
(ID SELECT: 4)
0
1 (default)
ON
ON
ON
ON
2
ON
ON
3
4
ON
ON
ON
ON
5
6
ON
ON
7∗
∗ The SCSI ID number “7” is normally reserved for the SCSI card.
Note
• In the case that other SCSI device has been already connected to the computer, be
sure that the CRW3200SX drive’s SCSI ID number is different from other devices’.
The CRW3200SX drive’s SCSI ID number is set at “1” by default.
• Set the dip switch completely upward/downward.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the CRW3200SX Drive
GTermination
A terminator prevents the reflection of SCSI signals at the last device of the SCSI
chain. The terminators of the first and last devices of the SCSI chain should be set
to ON. If the CRW3200SX drive is not at the last of the SCSI chain, the
TERMINATOR (SW 4) of the dip switch should be set to OFF.
Computer
Extenal SCSI
Device
(unterminated)
CRW3200SX
(terminated)
SCSI card
(terminated)
Termination ON (default)
Termination OFF
OFF
OFF
ON
ON
Set to ON if the CRW3200SX drive
is the last of the SCSI chain
Set to OFF if the CRW3200SX drive
is not the last of the SCSI chain
Note
The TERMINATOR (SW 4) of the dip switch is set at ON by default.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect the CRW3200SX Drive
1
2
Turn off the computer and all peripheral devices.
Check that the power switch on the rear panel of the
CRW3200SX drive is turned off (STANDBY).
3
Connect the SCSI cable to either one of the SCSI connectors on
the rear panel of the CRW3200SX drive.
Connect the other end of the SCSI cable to the SCSI card
connector of the computer or the other SCSI device.
SCSI card
connector
CRW3200SX
rear panel
SCSI connector
SCSI cable
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the CRW3200SX Drive
SCSI cable
• The connector of SCSI cables or SCSI interface cards varies. A SCSI cable with proper
connectors for both the CRW3200SX drive and the SCSI interface card is required.
SCSI connector of the CRW3200SX drive is D-sub half-pitch 50-pin pin-type.
D-sub half-pitch 50-pin pin-type (for the CRW3200SX drive)
CORRECT
Half-pitch 50-pin Centronics
INCORRECT
• The maximum total length of the SCSI cables depends on the number of external
SCSI devices connected to the computer.
The number of external SCSI devices
connected to the computer
The maximum total length
of the SCSI cables
1 to 3 SCSI devices
4 to 7 SCSI devices
3.0 m
1.5 m
Note
For proper operation, connecting the devices with isometric SCSI cables is
recommended. (An example of connection: connecting 3 external SCSI devices)
Computer
External SCSI devices
1 m
1 m
1 m
The maximum total length of SCSI cables is 3.0 m.
• An Ultra SCSI mode compatible high impedance cable (characteristic impedance: 100
± 10 Ω) is required.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Connect the included AC adapter to the DC-IN connector of
the CRW3200SX drive.
The arrow on the adapter plug faces to the screw (the left side of the
connector).
DC-IN
connector
Screw
Arrow
5
Connect the included power cable to the AC adapter (G).
Connect the other end of the power cable to the wall socket
(G).
G
Power cable (included)
G
Continued on next page
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the CRW3200SX Drive
Note
• Use the included AC adapter only. Do not use other adapters.
• The AC adapter may get warm during use under normal conditions.
• The AC adapter consumes power, shown in the table below, while connected to
the wall socket even if the power switch of the CRW3200SX drive is turned off.
Remove the power cable from the wall socket when not using the CRW3200SX
drive for a prolonged period.
Power source
100 V, 120 V
220 V
Power consumption
0.8 W
0.9 W
230 V, 240 V
1.0 W
6
Turn on the power switch of the CRW3200SX drive.
Blinks blue and
then lights purple
Note
When turning on the CRW3200SX drive, be sure that the LED on the front panel
blinks blue and then lights purple. (P. 2)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Check Recognition of the CRW3200SX Drive
After connecting the CRW3200SX drive to the computer, follow the steps below to
check that the drive is recognized properly by the computer.
For Windows
1
2
Turn on the computer.
Check that the CRW3200SX drive and the SCSI card are
recognized properly by the computer.
For Windows 95/98/98 Second Edition/Me
1 Select Start on the task bar, then Settings, Control Panel, System, and
Device Manager tab. The Device Manager dialog box appears.
Note
For Windows Me, if the System icon is not found in the Control Panel
window, click view all Control Panel options on the left side of the window.
2 Check that the following icons are shown.
a: “YAMAHA CRW3200S” in the “CDROM” item
b: “SCSI controllers”
a
b
(This screen is an
example on Windows Me.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the CRW3200SX Drive
For Windows 2000 Professional
1 Select Start on the task bar, then Settings, Control Panel, System,
Hardware tab, and Device Manager. The Device Manager dialog box
appears.
2 Check that the following icons are shown.
a: “YAMAHA CRW3200S SCSI CdRom Device” in the “DVD/CD-
ROM drives” item
b: “SCSI and RAID controllers”
a
b
For Windows XP
1 Select Start on the task bar, then Control Panel, System, Hardware tab,
and Device Manager. The Device Manager dialog box appears.
Note
If the System icon is not shown in the Control Panel window, click Switch to
Classic View on the left side of the window.
2 Check that the following icons are shown.
a: “YAMAHA CRW3200S SCSI CdRom Device” in the “DVD/CD-
ROM drives” item (Fig. 1)
b: “SCSI and RAID controllers” (Fig. 2)
Figure 1
a
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2 (scroll down)
b
The drive name is not shown or there is
or
mark.
The CRW3200SX drive has not been recognized properly. Check the cable
connections and settings.
3
Change the Sync data transfer setting.
For Windows 95/98/98 Second Edition/Me
1 In the Device Manager dialog box (P. 16), select YAMAHA CRW3200S
Properties and then Settings tab.
2 Check the “Sync data transfer.”
With sync data transfer, the data transfer speed between the CRW3200SX
and the computer is faster than asynchronous transfer speed.
Check
(This screen is an example
on Windows Me.)
Note
• For details, refer to the documentation that comes with the SCSI card.
• For Windows 2000 Professional/XP, “Sync data transfer” will be
automatically selected if the SCSI card supports this feature.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the CRW3200SX Drive
For Macintosh
1
2
Turn on the computer.
Check that the CRW3200SX drive and the SCSI card are
recognized properly by the computer.
1 Select Apple System Profiler in the Apple menu.
2 Select Devices and Volumes tab (for Mac OS 8.5 or later).
Note
Select Select in the menu bar, and then Device Information (for Mac OS 8/8.1).
3 In the “SCSI Bus 1” item, select the SCSI ID number set for the
CRW3200SX drive.
“CRW3200S” should be shown in the “Product ID” item when the
CRW3200SX drive has been recognized properly.
“CRW3200S”
(This screen is an
example on Mac OS 9.1.)
“CRW3200S”
(This screen is an
example on Mac OS 8.1.)
Note
The extension files that support the CRW3200SX drive are required to mount
and read the disc even if the drive is recognized by Apple System Profiler. The
extension files come with the CD writing software. For details, refer to the
documentation that comes with the CD writing software.
4 Install CD Writing Software
Install the CD writing software. For details about how to install CD writing
software, refer to the documentation that comes with it.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading/Ejecting a Disc
Prior to the operation, check that the CRW3200SX drive is turned on.
1
Open the disc tray by pressing the eject button.
Press the eject button
2
Place the disc onto the disc tray properly with its label facing
upward.
Or remove the disc from the disc tray carefully so not to damage it.
Place or remove the disc
onto/from the disc tray
3
Close the disc tray by pressing the eject button or by gently
pushing the disc tray into the drive.
Note
• Place or remove the disc after the disc tray has fully opened. Do not push or pull
the disc tray with applying excessive force to avoid damage to the drive or the
disc.
• The disc tray does not open while the application software prohibits ejecting,
including when the drive accesses the disc.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading/Ejecting a Disc
Manually Ejecting a Disc
If the disc tray fails to open for some reason, such as a power failure, follow the
steps below to remove the disc from the drive.
Note
Frequent use of this operation may cause malfunction of the drive.
1
Prepare a thin pin-like object, such as a straightened paper
clip.
Use an object less than 2 mm in diameter and more than 3 cm in length.
2
3
Turn off the CRW3200SX drive.
Insert the thin pin-like object straight into the manual eject
hole, and push it in.
When the disc tray opens, remove the disc.
Manual eject hole
4
Turn on the CRW3200SX drive, and close the disc tray.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the YAMAHA CD-R/RW Drive website for the latest support data,
including information on troubleshooting.
YAMAHA CD-R/RW Drive website
Europe
1 The CRW3200SX drive is not turned on when the power switch is ON.
(The front panel LED does not light.)
G Are the AC adapter and the power cable connected properly?
Turn off the power switch and check that the CRW3200SX drive, the AC adapter,
the power cable, and the AC outlet are connected properly. (P. 14)
If the CRW3200SX is not turned on (the front panel LED does not light) even if they
are connected properly, contact the store of purchase or your nearest Yamaha dealer
(listed at the back of this manual).
2 The operating system does not start up properly.
G Is the SCSI card installed properly?
Refer to the documentation that comes with the SCSI card.
3 The CRW3200SX drive is not recognized by the operating system.
(Refer to page 16 for Windows or page 19 for Macintosh to check recognition
of the CRW3200SX drive.)
G Is the SCSI card recognized by the operating system properly?
Follow the documentation that comes with the SCSI card, and check that the SCSI
card is recognized by the operating system properly.
If the SCSI card is recognized, contact the store of purchase or your nearest Yamaha
dealer (listed at the back of this manual).
If not, refer to the documentation that comes with the SCSI card. If the SCSI card is
still not recognized, there may be a problem with the SCSI driver (mini-port driver)
or elsewhere. Contact the manufacturer of the SCSI card.
Note
For PC/AT compatible machines, recognition of the SCSI card and the CD-R/RW drive
may be available on the screen when the SCSI BIOS is activated prior to starting up
Windows. For details, refer to the documentation that comes with the SCSI card.
Continued on next page
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
BIOS
The Basic Input/Output System (BIOS) is a basic control program for the data access
between a computer and peripheral devices. Generally, the BIOS resides on a computer
motherboard, a ROM chip of an extension card, or a flash memory. The BIOS checks the
system and recognizes devices (such as serial ports or hard disk controllers) prior to
starting up the operating system.
G Is the proper SCSI driver (mini-port driver) installed? (For Windows)
Be sure that the latest SCSI driver for the SCSI card is installed. For information
about the latest SCSI driver for the SCSI card, contact manufacturer of the SCSI
card.
G Is the CRW3200SX drive connected to the SCSI card properly with the SCSI cable?
Turn off the CRW3200SX drive and the computer. Check that the SCSI cable is
fully connected to the CRW3200SX drive. (P. 12)
G Is the CRW3200SX drive’s SCSI ID number is different from other devices’?
CRW3200SX drive’s SCSI ID number is different from other devices’. (P. 10)
G Is the CRW3200SX drive’s SCSI ID number is different from the SCSI card’s?
If the CRW3200SX drive’s SCSI ID number is set to “7,” set it to other ID number
that are not used by other SCSI devices. (P. 10)
G Aren’t the pins of the SCSI connectors damaged?
Check that the pins of the SCSI connectors are not deformed.
G Is the terminator set properly?
Be sure that the terminator of the last device of the SCSI chain is set to ON while the
other devices are set to OFF. (P. 11)
If the CRW3200SX drive is still not recognized, contact the store of purchase or
your nearest Yamaha dealer (listed at the back of this manual).
4 The disc tray does not open when you press the eject button.
G Is the CRW3200SX drive turned on? (Does the LED on the front panel light?)
Refer to “The CRW3200SX drive is not turned on when the power switch is ON.
(The front panel LED does not light.).” (Troubleshooting, Item 1)
G Is any CD writing software being used?
Some CD writing software prohibits ejecting while accessing. (If you are using such
a software program, the disc tray does not open even if the eject button is pressed.)
In such a case, follow the steps in the software window to eject the disc, or quit the
CD writing software prior to pressing the eject button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
G Is the disc icon shown on the screen? (For Macintosh)
When the disc icon is shown on the screen, the eject button cannot be used. Drag the
disc icon into the Trash and drop it there to unmount the disc to open the disc tray.
G Is the disc tray opened when the computer is restarted?
Quit all running application software, restart your computer, and press the eject
button of the CRW3200SX drive.
For Macintosh, when the disc icon is shown on the screen, the eject button cannot be
used. Drag the disc icon into the Trash and drop it there to unmount the disc to open
the disc tray.
G Is the disc tray opened when the SCSI cable is removed from the CRW3200SX
drive?
Remove the SCSI cable from the drive while the AC adapter is connected, and press
the button.
G Turn off the computer and the CRW3200SX drive, and remove the disc following
“Manually Ejecting a Disc.” (P. 21)
If the disc tray is caught in the drive and does not come out, or if it cannot be opened
or closed using the eject button after it is pulled out manually, contact the store of
purchase or your nearest Yamaha dealer (listed at the back of this manual).
5 The disc is ejected without order (or it comes out spontaneously).
G Is the disc set properly (horizontally) on the disc tray?
Set the disc properly, and close the disc tray.
G Is the disc dusty or dirty?
Remove dust or dirt from the disc using an air spray or a dry soft cloth. To avoid
damaging discs, wipe the disc gently from the center perpendicular to the edge of the
disc.
G Does the drive accept other discs (audio CD, CD-ROM, blank CD-R disc, etc.)?
If a specific disc is ejected, the disc itself may be damaged or deformed.
If all discs are ejected, contact the store of purchase or your nearest Yamaha dealer
(listed at the back of this manual).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6 No data can be read from a disc.
G Is the disc ejected without order?
Refer to “The disc is ejected without order (or it comes out spontaneously).”
(Troubleshooting, Item 5)
G Is the disc compatible with the drive? (P. 5, 30)
Be sure that the disc is compatible with the CRW3200SX drive.
G Is the disc dusty or dirty?
Remove dust or dirt from the disc using an air spray or a dry soft cloth. To avoid
damaging discs, wipe the disc gently from the center perpendicular to the edge of the
disc.
G Can data be read from other discs (audio CD, CD-ROM, etc.)?
If no data can be read from a specific disc, data may be written in a format that the
drive cannot recognize, or the disc itself may be damaged or deformed. Note that no
read data correctly from a disc even if the disc is compatible with the drive.
G Are the extension files supporting the CRW3200SX installed? (For Macintosh)
If the extension files supporting the drive are not installed, the disc cannot be
mounted or read. The extension files come with the CD writing software.
For details, refer to the documentation that comes with the CD writing software.
G Does the LED on the front panel of the CRW3200SX drive light correctly when a
disc is inserted?
When a disc is inserted, the LED will blink blue for a moment and then light blue.
(P. 2)
If no data can be read from a specific disc, data may be written in a format that the
drive cannot recognize, or the disc may be damaged or deformed.
If the LED on the front panel remains purple (stating that the drive cannot recognize
the disc) no matter what type of disc is inserted, contact the store of purchase or your
nearest Yamaha dealer (listed at the back of this manual).
7 The playback of an audio CD (CD-DA) cannot be heard.
Check that the volume is not set to the minimum level.
Be sure that headphones or external speakers are properly connected to the
CRW3200SX drive.
For Windows Me/XP, change the settings as follows. (If Windows Media Player 7.0
or later is used with Windows Me/XP, this problem can happen since the digital
playback option is activated by default setting.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows Me
1 In the Device Manager dialog box (P. 16), select YAMAHA CRW3200S
Properties and then Properties tab.
2 Uncheck the “Enable digital CD audio for this CD-ROM device” in the “Digital
CD Playback” item.
Uncheck
(This screen is an
example on Windows Me.)
3 Start “Windows Media Player.” In the menu bar, select Tools, Options and CD
Audio tab.
4 Uncheck the “Digital playback” in the “Playback Settings” item.
Uncheck
(This screen is an example on
Windows Media Player 7.0.)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
For Windows XP
1 Follow “For Windows Me” on page 26, and uncheck the “Enable digital CD
audio for this CD-ROM device.”
2 Start “Windows Media Player.” In the menu bar, select Tools, Options, Devices
tab, CD-RW Drive, and Properties.
3 Select “Analog” in the “Playback” item.
Select
(This screen is an example on
Windows Media Player 8.0.)
8 No data can be read from any CDs, a disc is ejected spontaneously, or the
LED remains purple when a disc is inserted. (The LED does not change from
lighting purple to blinking blue and then lighting blue.) (P. 2)
Disconnect the SCSI cable from your drive while the AC adapter is connected. Insert
the disc once again. If a specific disc is automatically ejected or cannot be read, the
disc itself may have a problem. If the drive does not accept any compatible discs
(and the LED remains purple), contact the store of purchase or your nearest Yamaha
dealer (listed at the back of this manual).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
9 The error message “ Buffer Underrun” is shown.
it. For details, refer to the documentation that comes with your CD writing software.
To prevent the occurrence of a buffer underrun and to increase the efficiency of data
writing, try the following:
– Reduce the data writing speed.
– Create an image file on the hard drive.
– Optimize the hard drive. (Defragmentation)
– Do not start any application software including screen savers during data writing.
– Deactivate the power management for the hard drive.
– Set the data transfer mode of any SCSI devices such as a hard drive or CD-ROM
drive to “Sync data transfer.” (P. 18)
Set the mode of any IDE devices to “DMA.”
– Deactivate Windows Active Desktop.
– Quit all memory-resident software programs.
– Check your CD writing software settings with the documentation that comes with
it.
Note
A writing error may happen if the drive is vibrated while data is being written on a CD-R
or a CD-RW disc.
10 Other problems
G Isn’t more than one CD writing software installed in your computer?
Installing more than one CD writing software in a computer may cause instability of
operation.
G Is there any problem with other SCSI devices?
When multiple SCSI devices are connected to the computer, some reason such as
device drivers or data transfer speed problems may cause improper operation.
In such a case, disconnect all SCSI devices from the computer while the
CRW3200SX drive is connected, and then check that the drive is recognized
properly by the computer.
G CD writing software must support the CRW3200SX drive in order to recognize the
drive.
Contact the manufacturer of your CD writing software to see whether the software
supports the CRW3200SX drive.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware
Firmware refers to the operating software designed for your CD-R/RW drive. It is
stored in the drive’s flash memory so that it can be rewritten.
To enhance operation reliability, Yamaha continues improving the firmware and
makes updates available on the internet.
You can find information about the latest firmware at the following websites.
YAMAHA CD-R/RW Drive website
Europe
These websites contain the latest YAMAHA CD-R/RW drive user support
information including information about the firmware.
Refer to the website regularly to check the latest information.
Checking the firmware version in the CRW3200SX drive
For Windows 95/98/98 Second Edition/Me
In the Device Manager dialog box (P. 16), select YAMAHA CRW3200S to
display the YAMAHA CRW3200S Properties dialog box, and then select the
Settings tab.
SCSI ID
number
The revision number shown
here varies depending on
the version of the firmware
in the drive as set at default.
(This screen is an example
on Windows Me.)
For Windows 2000 Professional/XP
The firmware version is not shown with Device Manager dialog box. Check the
firmware version with the CD writing software.
For Macintosh
Check the firmware version with Apple System Profiler. (P. 19)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CRW3200SX Drive Specifications
Supported Formats
Write
G
Read
G
Play back *4
CD-DA
G
G
G
G
CD TEXT
CD-ROM *1
G
G
G
G
Mixed Mode CD-ROM
(CD-ROM+CD-DA)
G
G
CD-ROM XA *1
Photo CD *1
Video CD
G
G
G
G
G
G
G
—
G
*2 *3
GG
G
*3
CD-i
CD EXTRA *1
G
GG
G
G
*1
includes multisession
proper disc required
proper application software required
proper application software may be required depending on the format
*2
*3
*4
Writing Methods
Disc-at-Once (DAO)
Session-at-Once (SAO)
Track-at-Once (TAO)
Packet Writing
Audio Master Quality Recording (High quality audio writing
mode)
CD-MRW (CD Mount Rainier ReWriting)
Writing/Reading
Speed
Writing CD-R
1X, 2X, 4X, 8X, 12X, 16X (CLV),
24X (18X – 24X Partial CAV)
CD-RW 2X, 4X, 8X, 10X (CLV),
4X – 10X Full CAV (Packet writing)
Reading 40X (max.) Full CAV
Note) • DATA: 40X (max.)
• CD-DA: 40X (max.) in audio extraction
• CD-DA: 1X only in audio playback
• Video CD: 10X (max.)
• Session closed disc: 40X (max.)
• Session unclosed disc: 12X (max.)
CD-R
1X, 2X, 4X, 8X, 12X, 16X, 24X (18X – 24X Partial CAV)
writing: CD-R discs specified in Orange Book Part 2, Ver. 3.1.
Note) Use a CD-R disc that matches the writing speed.
CD-RW 2X or 4X writing:
Orange Book Part 3, Vol.1, Ver. 2.0-compliant discs
4X, 8X, 10X, 4X – 10X Full CAV (Packet writing) writing:
Orange Book Part 3, Vol.2, Ver. 1.0-compliant discs
Note) For 2X writing, Orange Book Part 3, Vol.1, Ver. 1.0-
compliant discs can be used.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CRW3200SX Drive Specifications
Data Capacity
700 MB (79 min.)
650 MB (74 min.)
550 MB (63 min.)
Maximum Recording Time
in Audio Master Quality
Recording
68 min. (with a 700 MB disc)
63 min. (with a 650 MB disc)
Data Transfer Rate
(Mode 1)
1X: 150 KB/sec.
2X: 300 KB/sec.
4X: 600 KB/sec.
8X: 1,200 KB/sec.
10X: 1,500 KB/sec.
12X: 1,800 KB/sec.
16X: 2,400 KB/sec.
24X: 3,600 KB/sec.
32X: 4,800 KB/sec.
40X: 6,000 KB/sec.
Burst Transfer Rate
5 MB/sec. (max, asynchronous)
20 MB/sec. (max, synchronous)
Interface
SCSI-3 (Ultra SCSI)
8 MB (3,176 sectors)
130 msec. (random access)
2,048 – 2,448 bytes
Data Buffer Size
Average Access Time
Sector Size
Installing Style
Disc Loading Type
Audio Out
Horizontal
Front auto-loading tray loading
Line Out specifications
• Frequency range: 20 – 20,000 Hz
• Output level: 700 mVrms
Power Consumption
17 W (writing/playback)
6 W (standby)
Operating Environment
Temperature: +5 – +35 ºC
Humidity: 25 – 80% RH (no condensation)
Dimension
(includes projection)
Width: 164.0 mm
Height: 56.0 mm
Depth: 265.0 mm
Mass
1.6 kg
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AC adapter (AD-301205)
Rated Input Voltage
Rated Input Current
Rated Output Voltage
Rated Output Current
Terminal Output Polarity
100 – 240 V AC
1.0 A or less
+5 V, +12 V DC
1.5 A
1: +12 V DC
2: GND
3: +5 V DC
4: GND
5: +5 V DC
2
4
5
1
3
Operating Environment
Temperature: +5 – +35 ºC
Humidity: 25 – 80% RH (no condensation)
Dimensions
Width: 79.5 mm
Height: 32.0 mm
Depth: 147.0 mm
(includes projection)
Mass
0.43 kg (approx.)
(includes the power cable)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CRW3200SX Drive Specifications
Safety/EMC Compliance
The CRW3200SX drive conforms to the following specifications.
Compliance Specifications
Country/
Region
Remarks
Category
Item
Standard
USA
Safety
Electricity UL60950
Information Technology
Equipment
Laser
21CFR1040.10
Class I Laser Product
FDA Chapter 1,
Subchapter J
EMC
Emission 47CFR15
FCC Part 15, Subpart B
Peripheral Device
Canada
EU
Safety
Electricity CSA C22.2
No. 60950
Information Technology
Equipment
EMC
Emission ICES-003
Electricity EN60950
Class B Digital Device
Safety
Information Technology
Equipment
Laser
EN60825
Class 1 Laser Product
EMC
Emission EN55022
Class B Information
Technology Equipment
Immunity EN55024
EN61000-3-2
EN61000-3-3
Australia
EMC
Emission AS/NZ 3548
Class B Information
Technology Equipment
New Zealand
Safety
EMC
Electricity Electrical Appliance
and Material Safety
Japan
Emission VCCI
Class B Information
Technology Equipment
Note that the specifications of the CRW3200SX drive are subject to change without
notice due to improvements.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes
Buffer Underrun Protection Function
CD-R/RW drives are equipped with a buffer memory, which temporarily stores data
that is being transferred. When the buffer memory becomes empty due to a delay of
data transfer for any reason, a writing error happens. Such condition is defined as
buffer underrun, and such an error is defined as a buffer underrun error.
Buffer Underrun Protection is featured in the CRW3200SX drive.
When buffer underrun almost happens, Buffer Underrun Protection temporarily
suspends the writing process. Writing resumes when enough data has accumulated
in the buffer memory. Buffer Underrun Protection in the CRW3200SX drive is
extremely accurate, resulting in seamless recording before and after suspension.
Test writing
Test writing is a function to check for the possible occurrence of buffer underrun in your
computer environment. When Buffer Underrun Protection of the CD writing software is
activated, the test writing function cannot be operated. Buffer Underrun Protection
should be deactivated to operate the test writing function.
Writing Methods
Disc-at-Once (DAO)
This method is used to write all data onto a disc in one operation. It writes multiple
pieces of data without placing a space between data, starting with the innermost
track of the disc. Once data is written by this method, no data can be added to the
same disc even if there is free space available on the disc. This method is useful for
making a backup copy of an entire disc.
Track-at-Once (TAO)
This method is used to write data on a disc on a track-by-track basis. A track can be
defined as the smallest unit of area that contains an ordinary program, image file,
text file, etc. This method enables you to add data to the same disc, one track of data
at a time, as long as there is free space available on the disc. A disc that contains data
written in several sessions is defined as a multi-session disc. An area that records
data and management information (Lead-in/Lead-out) is defined as a session. Lead-
in and Lead-out are signals written for stating the starting and ending points of one
session.
Note
Ordinary audio CD players can only play back single-session discs or the first session on
a multi-session disc. Do not record audio data on the second and subsequent sessions.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes
Session-at-Once (SAO)
This method is used to write data on a disc on a session-by-session basis. Unlike
Track-at-Once described above, Session-at-Once enables you to record multiple
tracks onto a disc at a time. CD EXTRA, for example, uses this method to write
multiple pieces of audio data (or multiple tracks) in the first session and information
required for computers in the second session. This method enables you to add data
into the same disc, one session at a time, as long as there is free space available on
the disc. A disc that contains data written in several sessions by this method is
defined as a multi-session disc, like a disc written by the Track-at-Once method.
Packet Writing
This method is used to record data onto a disc on a file-by-file basis. This method
divides a track into small segments called “packets” so that data can be written on a
packet-by-packet basis, which means that you can write data in much the same way
as you copy data to a floppy or hard drive. Since the data can be written easily,
packet writing is proper to daily data backup. Packet writing also enables you to add
packets to a disc as long as there is free space available on the disc.
Note
• Discs need to be formatted for packet writing prior to use.
• Formatting a CD-RW disc using packet writing software reduces its storage capacity
by about 100 MB since packet writing requires exclusive space for itself.
• For CD-R discs, deleting data means masking data but not actually removing data.
Therefore, actual free space in a CD-R never be increased even if data is deleted.
Audio Master Quality Recording (High quality audio writing mode)
This method enables you to record high quality data that can be played back with the
1.4 m/s linear velocity.
Note
• Audio Master Quality Recording (High quality audio writing mode) is enabled with
the 4X speed Disc-at-Once writing method.
• Maximum recording time is 63 minutes for a 650 MB CD-R disc and 68 minutes for a
700 MB CD-R disc.
CD-MRW (CD Mount Rainier ReWriting)
This method is a new standard of packet writing for a CD-RW disc and supports
defect control by the drive, background formatting, and disc ejecting during
formatting. It enables you to use a CD-RW disc like a floppy disk.
Note
Formatting a CD-RW disc using CD-MRW reduces its storage capacity by about 150 MB
since CD-MRW itself requires exclusive disc space.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Distributors and Head Offices / Vertriebs- und Hauptgeschäftsstelle
Distributeurs et sièges sociaux / Distribuidores y Casas matrices
If you have any questions, please contact the store of purchase or your nearest Yamaha dealer
listed below. Contact Yamaha Corporation Japan from outside of the listed countries.
Falls Sie weitere Fragen haben, wenden Sie sich an Ihren Fachhändler oder den örtlichen
Yamaha-Händler (eine Liste der Yamaha-Händler befindet sich am Ende dieses Handbuchs).
Aus anderen Ländern als den aufgeführten wenden Sie sich an Yamaha Corporation Japan.
Si vous avez des questions à poser, veuillez prendre contact avec le magasin où vous avez fait
l’achat de l’appareil ou un revendeur de matériel Yamaha le plus proche de votre domicile
parmi ceux énumérés ci-dessous. Prenez contact avec Yamaha Corporation Japan si vous ne
vous trouvez pas dans un des pays mentionnés:
Si tiene alguna duda, póngase en contacto con el establecimiento de adquisición o con su
representante Yamaha más cercano indicado a continuación. En caso de países no
contemplados en la lista, póngase en contacto con Yamaha Corporation Japan:
EUROPE, EASTERN EUROPE and
RUSSIA
AUSTRALIA
Yamaha Music Australia Pty., Ltd.
Level 1, 99 Queensbridge Street
Southbank, Victoria 3006
AUSTRALIA
Yamaha Elektronik Europa GmbH
IT-Sales Division
Siemensstrasse 22-34,
D-25462 Rellingen, GERMANY
TEL: +61 3 9693 5111
FAX: +61 3 9699 2332
TEL: +80092624222
SINGAPORE, MALAYSIA, KOREA,
THAILAND, PHILIPPINES, INDIA,
VIETNAM, CAMBODIA,
MYANMAR, INDONESIA and IRAN
Yamaha Electronics Asia Pte Ltd.
138 Cecil Street
(AUSTRIA, BELGIUM, DENMARK, FINLAND,
FRANCE, GERMANY, HUNGARY, ICELAND,
IRELAND, ITALY, LUXEMBOURG,
NETHERLANDS, NORWAY, PORTUGAL, SPAIN,
SWEDEN, SWITZERLAND, UNITED KINGDOM)
TEL: +80093067
(MONACO)
#05-02/03 Cecil Court, Singapore 069538 SINGAPORE
TEL: +65 223 3992
FAX: +65 223 9810
If you are calling from outside the countries mentioned
above, or if you can’t get through on the Yamaha toll-
free number, use the following number instead:
TAIWAN
TEL: +3214400793
Yamaha KHS Music Co., Ltd.
11F, No.150, Tun Hua North Rd.
Taipei,TAIWAN R.O.C.
TEL: +886 2 2713 8999
FAX: +886 2 2713 8666
U.S.A.
Yamaha Electronics Corporation, USA
6660 Orangethorpe Avenue,
Buena Park, CA 90620, U.S.A.
TEL: +1 714 522 9105
FAX: +1 714 670 0108
JAPAN
Yamaha Corporation
AV & IT Business Group
CANADA
Overseas Sales & Marketing Division
10-1 Nakazawa-cho, Hamamatsu-shi, Shizuoka-ken
430-8650, JAPAN
TEL: +81 53 460 3411
FAX: +81 53 467 2110
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough,
Ontario M1S 3R1, CANADA
TEL: +1 416 298 5664
FAX: +1 416 292 0732
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|