UAB
CDR-HD1500
HDD/CD Recorder
Enregistreur CD/Disque Dur
MULTI JOG
PUSH ENTER
TEXT/TIME
MODE
MENU
CLEAR
TRACK NO.
BOOKMARK
COMPLETE
DIGITAL REC LEVEL
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
MIN
MAX
OWNER’S MANUAL
MODE D’EMPLOI
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
• Explanation of Graphical Symbols
9
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
IMPORTANT!
13 Unplug this apparatus during lightning
Please record the serial number of this unit in the space below.
storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.
We WantYou Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend
you to avoid prolonged exposure from excessive volume levels.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Address:
Yamaha Electronics Corporation, U.S.A.
6660 Orangethorpe Avenue
Buena Park, CA 90620
714-522-9105
Telephone:
Fax:
714-670-0108
Type of Equipment:
Model Name:
HDD/CD Recorder
CDR-HD1500
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation.
See the “TROUBLESHOOTING” section at the end of this manual if interference to radio reception is suspected.
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be determined
by turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
Relocate either this product or the device that is being affected by
the interference.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/ reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
3. NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corporation, U.S.A. 6660
Orangethorpe Avenue, Buena Park, CA 90620.
The above statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of other electronic devices.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT
• To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
• Install this unit in a well ventilated, cool, dry, clean place – away
from direct sunlight, heat sources, vibration, dust, moisture, and/
or cold. Avoid ventilation space of at least 30 cm on the top, 20
cm on the left and right, and 10 cm on the back of this unit.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
• Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT
The wires in this mains lead are coloures in accordance with the
following code:
• Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in a environment with high
humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire, damage
to this unit, and/or personal injury.
GREEN-and-YELLOW:Earth
BLUE:Neutral
BROWN:Live
• Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do NOT place:
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows: The wire which is
coloured GREEN-and-YELLOW must be connected to the
terminal in the plug which is marked by the letter E or by the
safety earth symbol or coloured GREEN or GREEN-and -
YELLOW. The wire which is coloured BLUE must be
connected to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED.
• Other components, as they may cause damage and/or
discoloration on the surface of this unit.
• Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
• Containers with liquid in them, as they may fall and liquid
may electrical shock to the user and/or damage to this unit.
• Do not cover the rear panel of this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct heat radiation. If
the temperature inside this unit rises, it may cause fire, damage to
this unit, and/or personal injury.
• Do not plug in this unit to a wall outlet until all connections are
complete.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an appropriate
3 pin plug fitted. For details, refer to the instructions described
above.
• Do not operate this unit upside-down. It may overheat, possibly
causing damage.
• Do not use force on switches, knobs and/or cords.
• When disconnecting the power cord from the wall outlet, grasp
the plug; do not pull the cord.
Note: The plug severed from the mains lead must be destroyed, as
a plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
• Do not clean this unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
• Only voltage specified on this unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. YAMAHA will
not be held responsible for any damage resulting from use of this
unit with a voltage other than specified.
For Canadian Customers
To prevent electric shock, match wide blade of plug to wide slot
and fully insert.
This Class B digital apparatus complies with Canadian ICES–
003.
• To prevent damage by lightning, disconnect the power cord from
the wall outlet during an electrical storm.
• Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reasons.
• When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
• Be sure to read the “TROUBLESHOOTING” section on common
operating errors before concluding that this unit is faulty.
• Before moving this unit, first check that there is no disc in the disc
tray. Finally, press POWER to turn off this unit, and disconnect
the AC power plug from the wall outlet.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/CD-R/CD-RW COMPATIBLE WITH THIS UNIT
■ Discs that can be used for recording on
■ Discs that can be played back
In addition to CD-R and CD-RW digital audio discs described
previously, commercially available CDs bearing the marks shown
below can also be played on this unit. If you use the CDs that do
not meet CD standards, this unit may operate properly.
this unit
Be sure to use only CD-R and CD-RW discs made by reliable
manufacturers.
CD-R and CD-RW digital audio discs that display either of the
following marks can be used with this unit.
FOR CONSUMER
FOR CONSUMER USE
FOR MUSIC USE ONLY
■ Playback of the CD-R disc copied with the
■ Discs that can be used for recording
• CD-R discs can only be recorded on once, and the recorded
material cannot be erased.
Audio Master Quality Recording mode
The Audio Master Quality Recording mode enables you to create a
CD with high quality sounds by increasing the linear velocity when
copying. The CD-R discs copied with this mode meet the CD
standards and can be played on a standard CD player. However,
some CD recorders may not play back these CD-R discs properly.
• CD-RW discs can be recorded on, have the recorded material
erased, and then recorded on again.
■ Discs that cannot be used for recording on
this unit
■ Playback on DVD players
Before playing back a finalized CD-R or CD-RW discs on a DVD
player, please check whether the DVD player is compatible with
CD-R or CD-RW discs or not. Refer to the owner’s manual of the
DVD player for more information. CD-R or CD-RW discs cannot
be played on a DVD player that is not compatible with CD-R or
CD-RW discs.
• Discs bearing marks other than those shown above.
• Discs intended for recording computer data.
• Discs intended for professional use or labeled “FOR
PROFESSIONAL USE ONLY”.
■ 79-minute CD-R disc
The actual recordable time of the CD-R disc with “80” written on
its package is 79 minutes 57 seconds. This manual describes such
CD-R disc as “79-minute CD-R disc”.
IMPORTANT
• Please check the copyright laws in your country to record
from records, CDs, radio, etc. Recording of copyright material
may infringe copyright laws.
■ Finalization of CD-R/CD-RW discs
To play back CD-R discs on a standard CD player and CD-RW
discs on CD-RW-compatible players, you need to perform the
process known as “finalization”. In the finalization process, the
Table of Contents (TOC) is written onto the discs.
Finalized CD-R discs
• CD-R discs can be played on a standard CD player.
• Further recording onto CD-R discs is not possible.
• Some CD players may not play back the finalized CD-R discs
properly due to differences in the playback system of different
manufacturers.
Finalized CD-RW discs
• CD-RW discs cannot be played on a standard CD player. CD-RW
discs can be played back on CD-RW-compatible players such as
this unit.
• Tracks written on CD-RW discs can be erased, and additional
tracks can be recorded after the TOC has been erased.
■ Erasure or loss of data
Yamaha and suppliers accept no liability for the loss of data written
on the HDD and CD-R or CD-RW discs, or any problems caused as
a result of using this unit. As a precaution, it is recommended that
the discs are tested after they have been recorded on. Furthermore,
under no circumstances do Yamaha and suppliers guarantee the
reliability of the discs.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON DISCS
■ Handling of discs
■ To prevent a malfunction of this
unit
Heed the following notes on handling of discs not to create any
cause for a recording failure, a loss of the recorded data, or a
malfunction of this unit.
• Do not use any non-standard shaped CDs (heart, flower shaped,
etc.) available on the market, because they are off-balance in their
weight.
If a non-standard shaped CD is loaded into this unit, it may create
problems such as improper playback, opening the disc tray,
creating an usual noise, and this unit’s failure.
• This compact disc recorder is designed for use with CDs
(including 8cm [3”] discs) bearing the following marks only.
Never attempt to load any other type of disc into this unit.
• CDs are not subjected to wear during play. However if the disc is
handled improperly, damage may be created on the disc to
adversely affect the disc’s play.
• Be sure to use a felt-tip pen or similar writing tool when writing
on the label side of the disc. Do not use a ball-point pen, pencil, or
other hard-tipped writing tool, as these may damage the disc and
may adversely affect further recording on the disc.
• When writing on the label side of CD-R or CD-RW discs, use an
oil-based felt-tipped pen.
• Do not use cleaning discs or warped discs. All of these could
damage this unit.
• Do not use the discs with glue left on their surface. It may get
stuck in this unit or create damage to this unit.
• Although playback of CDs is generally not affected by small
particles of dust or fingerprints on their playing surface, dust,
fingerprints, small scratches and direct sunlight on the recording
surface of a CD-R or CD-RW disc may make recording impos-
sible. Therefore, for optimal performance of the recorder and for
long-term enjoyment of your CD collection, handle discs
correctly as outlined in the following guidelines.
• When using an 8cm (3”) disc, do not place a normal 12cm (5”)
disc on top of it.
• Do not use the discs printed with commercially available label
printers.
1. Hold discs by touching only the edges or center hole. When
setting/removing a disc to/from the disc tray, be careful not to
damage the disc surface.
2. When a disc is not currently being used, remove it from the
recorder and store in an appropriate case.
3. With proper disc maintenance, cleaning should not be
necessary. However, should cleaning be required, wipe by
using a clean, dry cloth. Do not wipe with a circular motion;
wipe straight outward from the center.
• Do not try to clean the disc’s surface by using any type of disc
cleaner, record spray, antistatic spray or liquid, or any other
chemical-based liquid, because such substances might irreparably
damage the disc’s surface.
• Do not expose discs to direct sunlight, high temperature, or high
humidity for a long period of time, because this might warp or
otherwise damage the disc.
No!
v
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. GETTING STARTED
4. CD-R/CD-RW COPYING
COPYING FROM THE HDD ONTO A
1
2
3
4
5
6
7
FEATURES ...................................................................... 2
ABOUT THIS MANUAL .................................................. 2
Structure ................................................................................ 2
About this manual.................................................................. 2
SUPPLIED ACCESSORIES ............................................ 3
NAMES OF BUTTONS AND CONTROLS ...................... 4
Front panel ............................................................................. 4
Remote control ...................................................................... 6
Display ................................................................................... 8
Rear panel .............................................................................. 9
CONNECTIONS ............................................................ 10
PREPARING THE REMOTE CONTROL ...................... 11
Installing batteries ............................................................... 11
Remote control operation range .......................................... 11
CD-R/CD-RW DISC ................................................... 38
Copying all tracks in a group to a disc ................................ 38
Copying selected tracks on the HDD .................................. 40
Copying high quality sounds
(Audio Master Quality Recording) ................................. 41
Setting the CDR copy mode ................................................ 42
Setting the CDR copy menu ................................................ 43
DUPLICATING A CD ..................................................... 45
Duplicating with high quality sounds
(Audio Master Quality Recording) ................................. 46
FINALIZING A CD-R/CD-RW DISC............................... 47
ERASING DATA ON A CD-RW DISC............................ 48
Erasing last tracks ................................................................ 48
Erasing all tracks ................................................................. 48
Erasing TOC ........................................................................ 48
Initializing a CD-RW disc ................................................... 49
2. BASIC OPERATIONS
BASIC OPERATIONAL FLOW ..................................... 12
TURNING ON/OFF THE UNIT ...................................... 14
SELECTING THE OPERATIONAL DRIVE
5. EDITING
(HDD/CDR) ................................................................ 14
SELECTING THE GROUP OR TRACK MODE ............ 15
Data on the HDD ................................................................. 16
Data on CDs ........................................................................ 17
SWITCHING DISPLAY INFORMATION ........................ 18
PLAYING BACK THE HDD OR CD .............................. 19
USEFUL PLAYBACK OPERATIONS ........................... 20
Searching by elapsed time (Time Search) ........................... 20
Setting the play style ........................................................... 20
Repeating playback of a track (Single Repeat) ................... 21
Repeating playback of the selected group (Full Repeat) ..... 22
Playing back randomly (Random Play) ............................... 22
Playing back only the beginning parts of tracks
(Intro Play) ...................................................................... 23
USING THE BOOKMARK LIST .................................... 24
Adding tracks to the bookmark list ..................................... 24
Playing back tracks in the bookmark list ............................. 24
Removing tracks from the bookmark list ............................ 24
USING ON-SCREEN DISPLAY (OSD).......................... 25
USING HEADPHONES ................................................. 25
LIST OF EDIT MENU .................................................... 50
Cursor button operations in the edit menu .......................... 50
Entering characters in the edit menu ................................... 51
EDITING ALBUMS ........................................................ 52
EDITING TRACKS ........................................................ 58
EDITING DISCS ............................................................ 66
CANCELING EDIT OPERATIONS (UNDO) .................. 70
6. OTHER FEATURES
CONVERTING DIGITAL/ANALOG OUTPUT SIGNALS
(DAC MODE) ............................................................. 71
HDD UTILITY................................................................. 72
Checking HDD information (HDD Info.) ........................... 72
Formatting the HDD (HDD Format) ................................... 72
SYSTEM UTILITY.......................................................... 73
Checking firmware version (Firm. Version) ........................ 73
Initializing settings (Initialize) ............................................ 73
Setting the display brightness (Dimmer Setup) ................... 74
Setting the video output (VIDEO Output)........................... 74
Starting playback automatically (Auto Play) ...................... 75
Updating the firmware version (Firm. Update) ................... 75
3. HDD RECORDING
COPYING FROM A CD ONTO THE HDD ..................... 26
Copying all tracks on a CD ................................................. 26
Copying selected tracks on a CD......................................... 27
Selecting a target disc .......................................................... 28
Setting the HDD copy mode................................................ 28
Setting the HDD copy menu................................................ 29
RECORDING FROM AN EXTERNAL COMPONENT
ONTO THE HDD ........................................................ 31
Recording input audio source .............................................. 31
Using an external timer to record ........................................ 32
Adjusting the recording level .............................................. 34
Setting the HDD recording mode ........................................ 35
Adding track markers during recording
7. APPENDIX
TROUBLESHOOTING .................................................. 76
DISPLAY MESSAGES .................................................. 78
GLOSSARY ................................................................... 80
LIST OF SYSTEM MENU .............................................. 81
RULES OF DIGITAL RECORDING AND NOTES ON
SYSTEM .................................................................... 82
Rules of digital recording .................................................... 82
Notes on system ................................................................... 82
SPECIFICATIONS ......................................................... 83
(Manual track marking) ................................................... 37
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
♦ Beautiful design and easily-viewable front panel display
♦ Supporting 10x speed HDD recording, 8x speed CD-R copying, and 4x speed CD-RW copying
♦ Supporting high-capacity HDD (up to 400 GB HDD)
♦ Long continuous recording of external input source
♦ Digital (coaxial and optical) and analog input jacks
♦ Copying high-quality sounds with Audio Master Quality Recording (when copying onto CD-R discs)
♦ Bookmark feature for easy accesses to favorite tracks
♦ Timer playback (Auto Play) and timer recording features using a commercially available timer
♦ On-screen display feature for easy operations
♦ Various edit menus to customize music data on the HDD
ABOUT THIS MANUAL
■ Structure
■ About this manual
This owner’s manual is composed of following sections.
• This manual is printed prior to production. Design and
specifications are subject to change in part for the reason of the
improvement in operativity ability, and others. In this case, the
product has priority.
1. GETTING STARTED
This section explains necessary preparations such as remote control
and connection. Please read this before using this unit.
• Some of the illustrations and names of the package contents etc
written in this manual may differ from the actual products and the
names written on the package etc.
2. BASIC OPERATIONS
This section explains frequently used operations such as group/
track selection or playback features.
3. HDD RECORDING
This section explains how to copy data from CDs to the HDD or
record external playback sources onto the HDD.
4. CD-R/CD-RW COPYING
This section explains how to copy data from the HDD to a CD-R or
CD-RW disc, duplicate a CD (copy from a CD to a CD-R/CD-RW),
or finalize a CD-RW disc.
5. EDITING
This section explains how to edit data (albums, tracks, and discs) on
the HDD. For the guideline, please refer to “LIST OF EDIT
MENU” (P.50).
6. OTHER FEATURES
This section explains how to check the HDD information or change
the system settings.
7. APPENDIX
This section provides you with the information about system setting
of this unit and troubleshooting.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSORIES
Make sure the following items are included in your package.
1
• Remote Control
• Batteries (size AA, UM-3, or R6) (2)
OPEN/CLOSE
COPY
A. M. Q. R. TIMER REC
REC
• Audio Pin Cables (2)
FINALIZE ERASE
INPUT
REPEAT RANDOM INTRO TEXT/TIME
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
4
5
6
STU
VWX
YZ
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
• Optical Cable
0
MODE
ENTER
COMPLETE
CLEAR
TRACK NO.
WRITE
HDD
CDR
• Video Pin Cable
GROUP SKIP
• Power Cable (for U.S.A. model)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF BUTTONS AND CONTROLS
■ Front panel
1
2 3
4
5
6
789 0 q
w e r
MULTI JOG
PUSH ENTER
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME
MODE
MENU
CLEAR
POWER
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
HDD
CDR
COPY
PHONES
LEVEL
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MIN
MAX
MIN
MAX
t
y
u
iopas df g h
1 POWER
Turns on/off this unit (P.14).
2 HDD
Sets the unit to the HDD operation mode (P.14).
3 CDR
Sets the unit to the CDR drive operation mode (P.14).
4 COPY
Sets the unit to the copy standby mode.
5 Front panel display
w MULTI JOG knob/DIGITAL REC LEVEL control
Normally, press to switch between the GROUP and TRACK
modes, and rotate to select a group (disc or album) or track.
In the menu screen, rotate to select items or adjust
parameters, and press to decide.
e MENU
Displays the menu screen corresponding to the current status
of the unit.
r CLEAR
Deletes the selected item or clears the setting.
Displays information on the current playback or recording.
You can switch information by pressing TEXT/TIME (P.18).
t PHONES jack
Connect headphones (P.25).
6 Disc tray
y PHONES LEVEL control
Set a disc on here when playing a CD, recording track data
from a CD to the HDD, or copying track data from the HDD
to a CD-R or CD-RW disc.
Adjusts the headphone volume when connecting headphone
to the PHONES jack (P.25).
u A.M.Q.R.
7 v (Open/Close)
Turns on/off the Audio Master Quality Recording (P.41, 46)
when copying data onto a CD-R disc.
Opens or closes the disc tray.
8 TRACK NO./BOOKMARK
i REC
Adds track markers (P.37) or bookmarks (P.24) to favorite
tracks.
Sets the unit to the recording standby mode.
o t/e (Skip/Search)
9 TEXT/TIME
Press to skip to the beginning of a current track (press
repeatedly to skip to a previous track), and press and hold to
fast-rewind the current playback (P.19).
Switches display information (P.18).
0 COMPLETE
Confirms specified operations or selected items.
p FINALIZE
Starts to finalize a CD-R or CD-RW disc (P.47).
q MODE
Press the button when configuring the settings of the
playback, recording, and copy modes.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF BUTTONS AND CONTROLS
a ERASE
Select items to be erased when erasing data (track data or
1
TOC) from a CD-RW disc (P.48).
s r/y (Search/Skip)
Press to skip to a next track and press and hold to fast-
forward the current playback (P.19).
d INPUT
Switches input sources (OPTICAL, COAXIAL, and
ANALOG) (P.31). The lamp for the selected input lights up.
f w/d (Play/Pause)
Starts playback of the currently selected group or track.
Pressing the button during playback stops the playback
temporarily (P.19).
In the copy or recording standby mode, press the button to
start recording.
g ANALOG REC LEVEL control
Adjust the recording level when recording analog sources
(P.34).
h a (Stop)
Stops playback (P.19).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF BUTTONS AND CONTROLS
1 v OPEN/CLOSE
Opens or closes the disc tray.
2 COPY
Sets the unit to the copy standby mode.
3 A.M.Q.R.
Turns on/off the Audio Master Quality Recording (P.41, 46)
when copying data onto a CD-R disc.
4 FINALIZE
Starts to finalize a CD-R or CD-RW disc (P.47).
5 ERASE
■ Remote control
OPEN/CLOSE
1
COPY
A. M. Q. R. TIMER REC
REC
2
3
4
5
6
7
u
i
o
FINALIZE ERASE
INPUT
REPEAT RANDOM INTRO TEXT/TIME
p
a
Select items to be erased when erasing data (track data or
TOC) from a CD-RW disc (P.48).
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
6 REPEAT
4
5
6
Turns on/off the Repeat Play (Single Repeat and Full
Repeat) mode (P.21, 22).
STU
VWX
YZ
8
7
8
9
7 RANDOM
SPACE
SYMBOL
10
BOOKMARK
MENU
0
Turns on/off the Random Play mode (P.22).
s
d
MODE
8 Alphabetical/numeric buttons
9
0
q
Selects track number to be played back or enters titles of
albums or tracks.
ENTER
9 MODE
COMPLETE
CLEAR
Press the button when configuring the settings of the
playback, recording, and copy modes.
f
g
TRACK NO.
WRITE
0 Cursor buttons (H, G,
Q
,
W), ENTER
HDD
CDR
Normally, press ENTER to switch between the GROUP and
TRACK modes. If the unit is in the GROUP mode, press H
or G to select a group, and press
w
Q
or
W
to select a track. If
the unit is in the TRACK mode, press the cursor buttons to
select a track.
h
j
e
r
t
y
In the menu screen, press the cursor buttons to select items
or adjust parameters, and press ENTER to decide.
k
q COMPLETE
Confirms specified operations or selected items.
w +/–
GROUP SKIP
l
;
Press + to move to the next menu and press – to move to the
previous menu. Also, you can use these buttons to adjust
parameters.
e 1 (Search)
Press and hold to fast-rewind the current playback (P.19).
r A (Stop)
Stops playback (P.19)
t 4 (Track Skip)
Press to skip to the beginning of the current track (press
repeatedly to skip to the previous track) (P.19).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF BUTTONS AND CONTROLS
y W/D (Play/Pause)
Starts playback of the currently selected group or track.
1
Pressing the button during playback stops the playback
temporarily (P.19).
In the copy or recording standby mode, press the button to
start recording.
u REC
Sets the unit to the recording standby mode.
i TIMER REC
Press the button when configuring the time for timer
recording (P.32).
o INPUT
Switches input sources (OPTICAL, COAXIAL, and
ANALOG) (P.31). The lamp for the selected input lights up.
p TEXT/TIME
Switches display information (P.18).
a INTRO
Turns on/off the Intro Play mode (P.23).
s BOOKMARK
Adds bookmarks to favorite tracks (P.24).
d MENU
Displays the menu screen corresponding to the current status
of the unit.
f CLEAR
Deletes the selected item or clears the setting.
g HDD, CDR
Switches the unit between the HDD and CDR drive
operation modes (P.14).
h TRACK NO. WRITE
Adds track markers to tracks (P.37).
j R (Search)
Press and hold to fast-forward the current playback (P.19).
k Y (Track Skip)
Press to skip to the next track (P.19).
l GROUP SKIP W
Press to skip to the next group (P.19).
; GROUP SKIP Q
Press to skip to the previous group (P.19).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF BUTTONS AND CONTROLS
■ Display
1
2
3
4
5
6
7
REC
LEVEL
8 8 8 8 8 8 8 8 8 8 8 8 8
TRACK
L
ALBM TOTAL DUPLCTA.M.Q.R.AUTO PRD DIGM
MARK SG A REP RNDM MULT ALL SYNC ANLG
TOC GROUP
CDRW TIME
dB
R
–30 –10
–6
–2
0
q
w
e
t
y
8 9
0
r
1 HDD mark
Lights when the unit is in the HDD operation mode.
2 TOTAL indicator
REP indicator
Lights when the Repeat Play mode is turned on. When
selecting the Single Repeat mode, “S REP” appears.
RNDM indicator
Lights when the total time (elapsed or remaining time) is
displayed.
Lights when the Random Play mode is turned on.
q Recording/copying mode indicator
3 DUPLCT indicator
AUTO indicator
Lights when the unit is in the copy standby mode or copying
process when duplicating a CD.
Lights when any AUTO feature is turned on. When selecting
the auto-period recording, “AUTO PRD” appears.
4 A.M.Q.R. indicator
SYNC indicator
Lights when the Audio Master Quality Recording is turned
on.
Lights when the unit is in a synchronized copying mode.
When selecting the multi-synchronized copying, “MULT
SYNC” appears, and when selecting the all-synchronized
copying, “ALL SYNC” appears.
5 Information display
Displays information (playback/recording time, titles, etc)
on the selected drive. You can switch information by
pressing TEXT/TIME (P.18).
w Copying method indicator
DIG indicator
6 CDR mark
Lights when the unit is in the digital copy process. When the
unit is in the Digital Move process, “DIG M” appears.
Lights when a disc is set in the disc tray and the unit is in the
CDR operation mode.
ANLG indicator
7 REC indicator
Lights when the unit is in the analog copy process.
Lights when the unit is in the copy standby mode or copying
process when recording/copying onto the HDD, CD-R disc,
or CD-RW disc.
e Level meter
Displays the recording level or the progress of an executed
process (finalization, etc).
8 ALBM indicator
Lights when selecting an album.
9 MARK indicator
r TOC indicator
Lights when a disc set in the disc tray has a TOC (disc
information).
Lights when selecting a bookmarked track.
t Disc indicator
0 Playback mode/play style indicator
G indicator
Displays the type of a disc set in the disc tray.
y MULTI JOG status indicator
Lights when “Style Group” is set as the play style.
A indicator
Displays the currently selected MULTI JOG status (items or
settings controlled by MULTI JOG knob operations).
Lights when “Style All” is set as the play style.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF BUTTONS AND CONTROLS
■ Rear panel
1
For details about HDD installation, refer to “INSTALLING THE HDD” of the “HDD Installation Manual”. For details about how to connect
other components, refer to “CONNECTIONS” (P.10).
1
2
3
VIDEO
OUT
S
VIDEO
VIDEO
L
L
R
R
REC
PLAY
COAXIAL
OPTICAL
COAXIAL
OPTICAL
4
3
LINE IN
—
LINE OUT
IN
OUT
RS–232C
ANALOG
DIGITAL
(U.S.A. model)
4
5
6
1 HDD slot
Open the cover when replacing the HDD.
2 VIDEO OUT jacks
5 DIGITAL jacks
DIGITAL IN (COAXIAL) jack
Inputs digital signals.
DIGITAL IN (OPTICAL) jack
Inputs digital signals.
S VIDEO jack
Outputs S-video signals.
VIDEO jack
DIGITAL OUT (COAXIAL) jack
Outputs digital signals.
Outputs composite video signals.
DIGITAL OUT (OPTICAL) jack
Outputs digital signals.
3 AC inlet (U.S.A. model only)
Plug the power cable to this inlet. (Be sure to connect the
power cable after connecting all other cables.)
6 RS-232C terminal
This terminal is for connecting a personal computer.
Information about connection software is to be announced
on the YAMAHA Website
4 ANALOG jacks
ANALOG LINE IN (REC) jacks
Inputs analog signals.
(http://www.yamaha.co.jp/english/product/av/).
ANALOG LINE OUT (PLAY) jacks
Outputs analog signals.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Turn off the power of this unit and the other components, and unplug them from the wall outlet before making any connections. Follow the
diagram below to make connections with proper cables.
Digital connections
• To output signals from this unit to an external component, connect DIGITAL OUT jack of this unit to the digital input jack of the external
component. To input signals from an external component to this unit, connect DIGITAL IN jack of this unit to the digital output jack of the
external component.
• This unit cannot input digital signals other than PCM signals.
Analog connections
• To output signals from this unit to an external component, connect ANALOG LINE OUT jack of this unit to the analog input jack of the
external component. To input signals from an external component to this unit, connect ANALOG LINE IN jack of this unit to the analog
output jack of the external component. Be sure to connect L (left) and R (right) jacks respectively
• To connect the turntable directly to this unit, first connect it to the phono equalizer and then connect to the ANALOG LINE IN (REC) jacks
on this unit.
Memo
• When you play the data on the HDD or CDs, signals are output both from the ANALOG LINE OUT (PLAY) jack and from the DIGITAL
OUT (OPTICAL/COAXIAL) jacks.
• Signals that are output through the DIGITAL OUT (OPTICAL) jacks or the DIGITAL OUT (COAXIAL) jacks while playing the data on
the HDD do not have information about the track markers. Therefore if these signals are recorded by an MD player, the track markers may
not be placed correctly on the recorded MD disc.
Arrow marks (➞) in the illustration below
indicate the direction of signals.
Monitor
DVD player, cable TV tuner, etc
Coaxial cable
(optional)
DIGITAL
OUTPUT
VIDEO IN
S VIDEO
VIDEO
COAXIAL
S-video cable
(optional)
Video pin cable
(included)
VIDEO
OUT
S
VIDEO
VIDEO
L
L
R
R
REC
PLAY
COAXIAL
OPTICAL
COAXIAL
OPTICAL
4
3
LINE IN
—
LINE OUT
IN
OUT
RS–232C
ANALOG
DIGITAL
(U.S.A. model)
*RS-232C terminal
Audio pin cable
(included)
Optical cable
(one included)
To wall outlet
DIGITAL
INPUT
Audio pin cable
(included)
COAXIAL
Coaxial cable
(optional)
PLAY
REC
L
L
OPTICAL
R
R
IN
OUT
OPTICAL
Amplifier or receiver
DIGITAL
OUTPUT
* This terminal is for connection of the personal computer. Information about the connection software is to be announced on the
YAMAHA Website (http://www.yamaha.co.jp/english/product/av/).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting a monitor
1
You can display the list of groups or tracks to be played, copying/recording settings or the list of setting items on the monitor by connecting
the monitor to this unit. Connect the S VIDEO jack or the VIDEO jack whichever available on your monitor.
Connecting the power cable
[U.S.A. model]
Plug the power cable into the AC inlet when all connections are complete, and then plug in the power cable to the wall outlet.
[Europe, U.K. and Australia models]
Plug in this unit to the wall outlet when all connections are complete.
PREPARING THE REMOTE CONTROL
■ Installing batteries
■ Remote control operation range
MULTI JOG
NATURAL SOUND HDD/CD RECORDER
PUSH ENTER
TEXT/TIME
MODE
MENU
1. Press the hook (h) of the battery cover to remove it.
POWER
TRACK NO. COMPLETE
CLEAR
BOOKMARK
DIGITAL REC LEVEL
HDD
CDR
COPY
2. Insert 2 batteries (AA, UM-3 or R6 type) according to
the polarity markings on the inside of the battery
compartment.
PHONES
LEVEL
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MIN
MAX
MIN
MAX
3. Close the cover until it snaps into place.
Remote control sensor
Within 6m (20’)
Battery replacement
If you find that the remote control must be used closer to this unit
than usual, the batteries are weak. Replace both batteries with new
ones.
Notes
• If operation of this unit by the remote control creates any
malfunction in any other components, change the placement of
the component.
Notes on batteries
• Do not spill any liquid on or drop the remote control. Do not
place it near a heater or in the bathroom where the temperature
and humidity become high.
• Use only AA, UM-3, or R6 type batteries for replacement.
• Do not mix a new battery with a used one.
• A rechargeable battery cannot be used.
• Make sure the remote control sensor is not exposed to direct
sunlight or strong lights. If it is, it may not function correctly.
• Do not mix different types of battery.
• Do not attempt to short out the batteries by directly connecting the
plus (+) and the minus (–) with a piece of metal.
• Remove the batteries if the remote control will not be used for an
extended period of time.
•
If the batteries leak, dispose of them immediately, taking care not
to touch the battery fluid. If the battery fluid comes into contact
with your eyes, mouth, or skin, rinse it off with water immediately,
and consult a doctor. Clean the battery compartment thoroughly
before installing new batteries.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONAL FLOW
Once you have finished all connections (P.10) and prepared the remote control (P.11), please follow the procedure below to copy music data
from a CD to the HDD and listen to it!
(In this procedure, we use a remote control to operate the unit although buttons on the unit control it in the same way.)
POWER
Disc tray
f
Press POWER on the unit to turn it
on.
1
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME
POWER
TRACK NO.
BOOKMARK
The display shows the “WELCOME” message,
then the unit becomes ready to operate.
HDD
CDR
COPY
PHONES
LEVEL
REC
FINALIZE
ERA
A.M.Q.R.
MIN
MAX
OPEN/CLOSE
Set a CD on the disc tray.
2
COPY
A. M. Q. R. TIMER REC
REC
COPY
Press f to open/close the disc tray.
FINALIZE ERASE
INPUT
REPEAT RANDOM INTRO TEXT/TIME
Place a CD properly as aligned in the recess with its label side
facing up.
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
4
5
6
STU
VWX
YZ
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
0
MODE
ENTER
COMPLETE
CLEAR
TRACK NO.
WRITE
HDD
CDR
HDD
A
W/D
GROUP SKIP
The unit starts to read the disc information (disc type and disc
capacity), then “Reading” appears in the display (the process
may take 10 to 20 seconds depending on the disc condition).
R e a d i n g
L
dB
R
–30 –10
–6
–2
0
When the disc information is read completely, the display
changes as follows, and the unit becomes ready to be operated.
Press COPY once to set the unit to
the copy standby mode.
3
Total number of tracks
Total time
The HDD and CDR marks in the display start to
blink.
14
6 8 17
–30 –10 –6 –2
L
dB
R
TOC GROUP
CD
0
REC
0 0 1 1 π 1
ALL SYNC
0 0 0
–6 –2
L
dB
R
DIG
TOC GROUP
CD
1
–30 –10
0
L
dB
R
TOC GROUP
CD
–30 –10
–6
–2
0
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONAL FLOW
Press W/D to start copy.
When copy is finished, press HDD to
select the HDD.
4
5
The display shows the progress of the copy
process.
The HDD mark in the display lights and HDD
information appears.
2
REC
0 0 1 1 π 1
ALL SYNC
0 0 1
–6 –2
D 0 0 1 1
6 5 4 5
–30 –10 –6 –2
L
dB
R
L
dB
R
DIG
TOC GROUP
CD
TOTAL
G
GROUP
–30 –10
0
0
Press W/D to start playback of the
To stop playback, press A.
7
6
tracks you just recorded on the HDD.
If you press W/D again, playback starts from the
To skip tracks or fast-rewind/-forward, refer to
“PLAYING BACK THE HDD OR CD” (P.19).
beginning of the currently selected track.
D 0 0 1 1
G
0 0 4
–6 –2
L
dB
R
GROUP
–30 –10
0
Now, please try various features of this unit!
•To enjoy playback with Repeat Play, Random Play, Intro Play features
“USEFUL PLAYBACK OPERATIONS” (P.20-23)
•To start playback automatically using external timer
“Starting playback automatically (Auto Play)” (P.75)
•To copy from the HDD to CD-R/CD-RW discs
“COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC” (P.38-44)
•To record external sources on the HDD
“RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD” (P.31-37)
•To edit the HDD data (albums, tracks and discs)
“5. EDITING” (P.50-70)
This unit equips various useful features other than those above.
Please read this manual carefully and enjoy pleasant music environment with this unit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING ON/OFF THE UNIT
POWER
MULTI JOG
PUSH ENTER
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME
MODE
MENU
POWER
TRACK NO. COMPLETE
BOOKMARK
CLEAR
DIGITAL REC LEVEL
HDD
CDR
COPY
PHONES
LEVEL
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MIN
MAX
MIN
MAX
Press POWER on the front panel.
Notes
When the unit turns on, the message “WELCOME TO YAMAHA
HDD/CD SYSTEM” appears on the front panel display, then the
unit becomes ready to be operated.
• Do not turn off the unit during playback or recording. Doing so
may damage the HDD or data.
• If the message “Wait” appears in the display for 20 seconds or
more after turning on the unit, the HDD may not be installed
properly. Refer to the “HDD Installation Manual” and check the
connection.
For information on specifications such as power consumption, refer
to “SPECIFICATIONS” (P.83).
SELECTING THE OPERATIONAL DRIVE (HDD/CDR)
This unit equips the HDD and CDR drive. When operating the unit, you need to select HDD or CDR drive in accordance with your purpose.
MULTI JOG
NATURAL SOUND HDD
/CD RECORDER
MODE
MENU
PUSH ENTER
TEXT/TIME
MODE
MENU
CLEAR
POWER
TRACK NO. COMPLETE
BOOKMARK
ENTER
DIGITAL REC LEVEL
HDD
CDR
COPY
COMPLETE
CLEAR
PHONES
LEVEL
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MIN
MAX
MIN
MAX
TRACK NO.
WRITE
HDD
HDD
CDR
CDR
HDD CDR
To operate the HDD drive, press HDD.
GROUP SKIP
The HDD mark lights in the display, and the disc information
appears.
To operate the CDR drive, press CDR.
The unit starts to read the information of a disc set in the disc tray.
When the disc information is read completely, the CDR mark lights
in the display, and the disc information appears.
When no disc is set in the disc tray, the message “No Disc” appears.
Memo
If you set a disc in the disc tray, the unit automatically switches to
the CDR drive operation mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE GROUP OR TRACK MODE
When starting playback or recording, you need to select the group or track mode at first, and then select an item (disc, album, track, etc) to
operate. The types of group you can select vary depending on the drives (HDD and CDR drive). For details, refer to “Data on the HDD”
(P.16) and “Data on CDs” (P.17).
2
MULTI JOG
MODE
MENU
MULTI JOG
PUSH ENTER
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME
MODE
MENU
CLEAR
ENTER
H, G
ENTER
POWER
TRACK NO. COMPLETE
BOOKMARK
COMPLETE
CLEAR
DIGITAL REC LEVEL
HDD
CDR
COPY
PHONES
LEVEL
ANALOG REC LEVEL
INPUT
TRACK NO.
WRITE
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
HDD
MIN
MAX
MIN
MAX
+, –
CDR
GROUP SKIP
1. Press the MULTI JOG knob (ENTER on the remote
control) to switch between the group and track mode.
When the group mode is selected, GROUP indicator lights.
When the track mode is selected, TRACK indicator lights.
GROUP indicator
L IV E A T C R A N E
L
GROUP
dB
R
–30 –10
–6
–2
0
G
When the group mode is selected
TRACK indicator
P R ID E A N D J O Y
TRACK
L
dB
R
–30 –10
–6
–2
0
G
When the track mode is selected
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select an item to operate.
If you select the GROUP mode in step 1, the item changes as
follows:
(When the unit is in the HDD operation mode)
Disc (1, 2...)
Album (1, 2...)
Bookmark
(When the unit is in the CDR operation mode)
Disc Bookmark
If you select the TRACK mode in step 1, the item changes as
follows:
Track1
Track2...
Track99
3. Start operations (playback, recording, etc) for any
purpose.
For details on playback operations, refer to “PLAYING BACK
THE HDD OR CD” (P.19). For details on recording operations,
refer to “3. HDD RECORDING” (P.26-37) or “4. CD-R/CD-
RW COPYING” (P.38-49).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE GROUP OR TRACK MODE
■ Data on the HDD
The data recorded onto the built-in HDD of this unit will be numbered and organized based on the following concept:
Bookmark
Group
This unit can make a temporary bookmark on a favorite track as
A collection of disc(s), album(s), and a bookmark are generically
called “group”.
playing back. The list of the program sources marked is called
“bookmark”. This marking is temporary and cannot be duplicated.
However, an album can be easily created by copying the
bookmarked tracks (P.54).
Disc
One consequent recording is counted and numbered as one unit of
disc. The HDD of this unit can record 999 discs at maximum.
(However, the number of discs to be created may be less than 999
for the space availability on the HDD.) The maximum length of one
disc on the HDD is 179 minutes 59 seconds.
Track
99 tracks can be recorded onto a disc at maximum. (However the
number of discs tracks to be recorded may be less than 99 for the
space availability on the HDD.) One track must be 4 seconds at
shortest and 179 minutes 59 seconds at longest.
Album
A group of the source programs selected from different discs and
recorded as the playlist is called “album”. “Album” corresponds to
the “program” function (to play back favorite tracks in the desired
order) of a standard CD player. This unit can record 999 albums at
maximum onto the HDD.
Disc
Album
Disc1
Album1
ALBUM
Track1
Track2
Track3
Track4
Track1-1
Track1-2
Track1-3
Track1-4
Track1
Track2
Track3
...
Link to Disc1:Track1
Link to Disc1:Track2
Link to Disc2:Track2
✓
...
Track99
Track1-99
Disc2
Album
ALBUM
Track1
Track2
Track3
Track4
Track2-1
Track2-2
Track2-3
Track2-4
Track1
Track2
...
Link to Disc1:Track3
Link to Disc2:Track1
✓
✓
...
Track99
Track2-99
Album999
ALBUM
Bookmark
Bookmark
BOOK
MARK
Track1
Track2
Track3
...
Link to Disc1:Track4
Link to Disc2:Track3
Link to Disc2:Track4
Disc999
Memo
• Albums and bookmark list do not include any track data in themselves. They recall track data saved in discs using links.
• When playing the bookmark list, tracks are played in the order you added a bookmark.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE GROUP OR TRACK MODE
■ Data on CDs
You can operate CDs (including CD-R and CD-RW) set in the CDR drive by group (disc or bookmark) or track.
2
Group
Track
When operating CDs (including CD-R and CD-RW), you can select
disc or bookmark as a group. Since the unit can only read one disc
at a time, the number of discs available on a CD is always one. In
addition, bookmarks on a CD will be erased if CD is removed from
the unit or the unit is turned off.
The number of tracks recorded onto a disc varies. Also, storage
capacity varies depending types of discs. For details, refer to
descriptions stated in each disc.
Disc
Bookmark
Disc CD
Bookmark
BOOK
MARK
Track1
Track2
Track3
Track4
Track1
Track2
Track3
Track4
✓
✓
✓
Track1
Track2
Track3
Link to Track1 on the disc
Link to Track4 on the disc
Link to Track99 on the disc
...
Track99
Track99
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING DISPLAY INFORMATION
The display located in the center of this unit provides the information about the drive (HDD or CDR drive) selected.
Each time TEXT/TIME is pressed, the display changes according to the operation.
Display while playing the data on the HDD
Display while playing a CD
Group number, track number and elapsed time of the
track being played
Track number and elapsed time of the track being played
1
0 0 4
–6 –2
L
dB
R
TOC GROUP
CD
–30 –10
0
D 0 0 1 1
G
0 0 4
–6 –2
L
dB
R
GROUP
–30 –10
0
Track number and remaining time of the track being
played
Group number, track number and remaining time of the
track being played
1
- 2 2 1
L
TOC GROUP
CD
dB
R
–30 –10
–6
–2
0
D 0 0 1 1
G
- 2 2 1
L
GROUP
dB
R
–30 –10
–6
–2
0
Disc total time
Group number and group total time
6 5 4 5
L
dB
R
TOTAL
TOC GROUP
CD
–30 –10
–6
–2
0
D 0 0 1 1
6 5 4 5
–30 –10 –6 –2
L
dB
R
TOTAL
G
GROUP
0
Disc remaining time
Group number and group remaining time
- 6 2 4 0
L
TOTAL
TOC GROUP
CD
dB
R
–30 –10
–6
–2
0
D 0 0 1 1
- 6 2 4 0
L
TOTAL
G
GROUP
dB
R
–30 –10
–6
–2
0
CD TEXT (when available)
Disc title
Group title or track title
Group title
L IV E A T C R A N E
L
TOC GROUP
CD
dB
R
–30 –10
–6
–2
0
L IV E A T C R A N E
L
GROUP
dB
R
–30 –10
–6
–2
0
G
Track title
Track title
P R ID E A N D J O Y
TRACK
TOC
L
dB
R
–30 –10
–6
–2
0
P R ID E A N D J O Y
CD
TRACK
L
dB
R
–30 –10
–6
–2
0
G
Display while recording onto a CD-R or
CD-RW disc
The group title with the GROUP indicator and the track title with
the TRACK indicator are switched by pressing the MULTI JOG
knob.
Track number and elapsed time of the track being
recorded
Display while recording onto the HDD
REC
Disc number, track number and elapsed time of the track
being recorded
1
0 0 4
–6 –2
L
dB
R
GROUP
CDRW
–30 –10
0
REC
D 0 0 1 1
0 0 4
–6 –2
Total recorded time on a disc
L
dB
R
–30 –10
0
REC
15 4 3
Disc number and total recorded time on the disc
L
dB
R
TOTAL
GROUP
–30 –10
–6
–2
0
CDRW
REC
D 0 0 1
15 4 3
–30 –10 –6 –2
Total recordable time on a disc
L
dB
R
TOTAL
0
REC
1
- 2 2 1
L
TOTAL
GROUP
dB
R
–30 –10
–6
–2
0
CDRW
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING BACK THE HDD OR CD
Follow the procedure below to carry out basic playback operations. This unit also provides various useful functions for playback. For
details, refer to “USEFUL PLAYBACK OPERATIONS” (P.20-23).
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
2
4
5
6
STU
VWX
YZ
Alphabetical/
numeric buttons
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
0
MODE
MULTI JOG
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
CLEAR
ENTER
Cursor buttons
TRACK NO. COMPLETE
BOOKMARK
COMPLETE
CLEAR
DIGITAL REC LEVEL
COPY
TRACK NO.
WRITE
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
HDD
CDR
A.M.Q.R.
MIN
MAX
+, –
A
t/e r/y w/d
a
E
R
Y
T
W/D
GROUP SKIP buttons
GROUP SKIP
To start playback
To skip tracks
After selecting a group or track (P.15), press w/d.
To skip to beginning of the current track, press t/e (T on the
remote control) once.
To stop playback
Press a.
To skip to a previous track, press t/e (T on the remote
control) twice.
To skip to a next track, press r/y (Y on the remote control).
Memo
Memo
If you press w/d after playback is stopped by pressing a, the unit
automatically starts playback from the beginning of the track that
has been stopped (Resume Play). To cancel the Resume Play
feature, press a while playback is stopped. In this case, the unit
starts playback from the beginning of the first track recorded on a
disc (or an album) or a CD.
• You can also skip a track by rotating MULTI JOG knob (pressing
+/– or the cursor buttons on the remote control) while the unit is
in the track mode (P.15).
• You can also directly select a track number by pressing alphabeti-
cal/numerical buttons.
To stop playback temporarily (Pause)
To skip groups
Press w/d during playback. To restart playback, press w/d again.
To skip to a previous group, press GROUP SKIP Q on the remote
control.
To fast-rewind or fast-forward
To skip to a next group, press GROUP SKIP W on the remote
control.
To fast-rewind, press and hold t/e (E on the remote control)
during playback. To fast-forward, press and hold r/y (R on
the remote control) during playback. To return to normal playback,
release the button.
Memo
You can also skip a group by rotating MULTI JOG knob (pressing
+/–, H or G on the remote control) while the unit is in the group
mode (P.15).
Memo
• You can also use the search feature while playback pauses. In this
case, the unit does not output any sounds while searching.
• Neither search nor pause is possible at the interval added by
“Tr. Interval” in the album edit menu (P.57).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
USEFUL PLAYBACK OPERATIONS
You can enjoy playback with various useful features with this unit.
■ Searching by elapsed time
■ Setting the play style
(Time Search)
Only when playing sources recorded on the HDD, you can set the
play style. The play style setting changes the range of playback.
You can search the desired part by setting the time.
1. While the unit is in the HDD operation mode, press
1. Press MODE to enter the playback mode setting.
MODE to display the playback mode setting.
“Time Search” appears on the display.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Play Style”.
T i m e S e a r c h
G
L
dB
R
–30 –10
–6
–2
0
P la y S t y le
L
dB
R
–30 –10
–6
–2
0
G
2. Press the MULTI JOG knob (ENTER on the remote
control).
3. Press the MULTI JOG knob (ENTER on the remote
The following message appears on the display.
control) to start the play style setting.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Style All” or “Style
Group”.
D 0 0 1 1 S
G
5 0 0
–6 –2
L
dB
R
–30 –10
0
TIME
3. To switch between minute and second, press t/e
or r/y (E, R, or on the remote control). To
S t y le A ll
Q
W
L
dB
R
–30 –10
–6
–2
0
A
specify time, rotate the MULTI JOG knob (press +/–, H
or G on the remote control).
If you stop rotating the MULTI JOG knob, this unit starts
searching the set time and starts playback from the set time.
S t y le G r o u p
L
dB
R
–30 –10
–6
–2
0
G
Memo
5. Press the MULTI JOG knob (ENTER on the remote
• You can skip to other tracks by pressing T or Y on the
remote control. When the track is skipped to another track,
the set time will be reset to “0:00”.
control) to confirm the selection.
When selecting “Style All”
The A indicator lights on the display.
• You can skip to other groups by pressing GROUP SKIP Q or
GROUP SKIP W on the remote control. When the group is
skipped to another group, the set time will be reset to “0:00”.
A
• You cannot search (P.19) during the time search mode.
• You cannot search by time during the random play (P.22) or
the intro play (P.23).
Random play, full repeat play, or intro play can be set for one of the
group categories (disc, album, and bookmark) recorded on the
HDD.
4. Press w/d or MODE to return to the normal playback.
Disc 1
Disc 2
Album 1
Group category for making a
setting
Album 2
Bookmark
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USEFUL PLAYBACK OPERATIONS
• When random play is set, all tracks that belong to the selected
group category are played in a random sequence.
■ Repeating playback of a track
• When full repeat play is set, all tracks that belong to the selected
group category are repeatedly played.
(Single Repeat)
You can listen to a single desired track or to a track being played
repeatedly.
• When intro play is set, the beginnings of all tracks that belong to
the selected group category are played one after another.
2
1. Press MODE to enter the playback mode setting, then
rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Repeat”.
For example, if full repeat play is set during the playback of disc 1,
all tracks recorded to discs 1 and 2 are repeatedly played.
Memo
• If “Style All” is set and the title is shown on the display, the sound
may be missing when this unit switches from one disc to another.
To avoid this problem, switch the display to from the indication of
time by pressing TEXT/TIME (P.18).
R e p e a t
L
dB
R
–30 –10
–6
–2
0
2. Press the MULTI JOG knob (ENTER on the remote
• Select “Style All” when sequentially playing the sources recorded
for long hours extending several discs.
control) to enter repeat play setting.
3. Rotate the MULTI JOG knob (press +/–, H or G on the
When selecting “Style Group”
remote control) to display “Repeat Single”.
The G indicator lights on the display.
R e p e a t S i n g le
L
G
dB
R
–30 –10
–6
–2
0
Random play, full repeat play, or intro play can be set for one of the
groups (disc, album, and bookmark) recorded on the HDD.
4. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the selection.
The S REP indicator lights on the display.
Disc 1
Disc 2
S
REP
Album 1
Album 2
Group for making a setting
Notes
• Single repeat play can be easily set by pressing REPEAT on the
remote control once.
Bookmark
• When random play is set, all tracks that belong to the selected
group are played in a random sequence.
• The track being played is repeatedly played even during playback
of an album or random play.
• When full repeat play is set, all tracks that belong to the selected
group are repeatedly played.
To cancel the Single Repeat setting
• When intro play is set, the beginnings of all tracks that belong to
the selected group are played one after another.
Select “Repeat Off” in step 3 or press REPEAT on the remote
control until the S REP indicator turns off on the display.
For example, if full repeat play is set during the playback of disc 1,
all tracks recorded to disc 1 are repeatedly played.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
USEFUL PLAYBACK OPERATIONS
■ Repeating playback of the selected
■ Playing back randomly
group (Full Repeat)
(Random Play)
You can repeatedly listen to all tracks recorded in a group (or a CD)
or group category.
You can listen to all tracks recorded in a group on the HDD or on a
CD in a random sequence.
1. Press MODE to enter the playback mode setting, then
rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Repeat”.
1. Press MODE to enter the playback mode setting, then
rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Random”.
R e p e a t
R a n d o m
G
L
L
dB
R
–30 –10
–6
–2
0
dB
R
–30 –10
–6
–2
0
2. Press the MULTI JOG knob (ENTER on the remote
2. Press the MULTI JOG knob (ENTER on the remote
control) to enter repeat play setting.
control) to enter random play setting.
3. Rotate the MULTI JOG knob (press +/–, H or G on the
3. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Repeat Full”.
remote control) to display “Random On”.
R e p e a t F u ll
R a n d o m O n
L
dB
R
–30 –10
–6
–2
0
L
G
dB
R
–30 –10
–6
–2
0
G
RNDM
4. Press the MULTI JOG knob (ENTER on the remote
4. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the selection.
control) to confirm the selection.
The REP indicator lights on the display.
The RNDM indicator lights on the display.
G
REP
G
RNDM
Notes
Notes
• Full repeat play can be easily set by pressing REPEAT on the
remote control twice.
• Random play can be easily set by pressing RANDOM on the
remote control.
• The tracks are repeatedly played in the same random order if
played in the random play mode.
• If random play is set during playback, the new setting applies to
the next track.
To cancel the Full Repeat setting
To cancel the Random Play setting
Select “Repeat Off” in step 3 or press REPEAT on the remote
control until the REP indicator turns off on the display.
Select “Random Off” in step 3 or press RANDOM on the remote
control until the RNDM indicator turns off on the display.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
USEFUL PLAYBACK OPERATIONS
■ Playing back only the beginning
parts of tracks (Intro Play)
You can listen to the beginnings of the tracks for a set amount of
time one after another.
2
1. Press MODE to enter the playback mode setting, then
rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to display “Intros Scan”.
In t r o s S c a n
L
dB
R
–30 –10
–6
–2
0
G
2. Press the MULTI JOG knob (ENTER on the remote
control) to enter intro play setting.
3. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to set the amount of time to play the
beginning of each track.
The playback time can be set in the 1 to 10 seconds range by 1
second steps and in the 10 seconds to 60 seconds range by 5
seconds steps.
In t e r v a l:
5
0
L
dB
R
–30 –10
–6
–2
G
4. Press the MULTI JOG knob (ENTER on the remote
control) or w/d to confirm the selection.
The unit starts intro play.
Memo
Intro play can be easily started by pressing INTRO on the remote
control. In this case, the unit automatically applies the playback
time setting adjusted last time.
To cancel the Intro Play setting
Press a (INTRO on the remote control).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE BOOKMARK LIST
You can easily listen to a group of desired tracks by selecting a list of tracks with bookmarks.
■ Adding tracks to the bookmark list
■ Removing tracks from the book-
mark list
Press TRACK NO./BOOKMARK on the remote control
during playback of the desired track until the MARK
indicator turns off.
Press TRACK NO./BOOKMARK on the remote control
during playback of the desired track until the MARK
indicator appears.
MARK
G
To clear the bookmark list of the selected drive
Press CLEAR as pressing TRACK NO./BOOKMARK on the front
panel while this unit is in the stop mode. The following message
appears on the display, and all bookmarks are canceled.
Memo
• When the track with a bookmark is selected, the MARK indicator
lights on the display regardless of whether it is during playback or
stopped.
B o o k m a r k C lr
• You can create one list of the tracks with bookmarks on each the
HDD and a CD.
L
GROUP
dB
R
–30 –10
–6
–2
0
MARK
G
• The list of the tracks on the HDD with bookmarks will be stored
on the HDD. However, only one list of tracks with bookmarks can
be stored. If you wish to have more than one list, copy the playlist
in the album (P.54).
• The list of the tracks on a CD with bookmarks will be erased if
the CD is taken out or the power of this unit is turned off.
• You can create a new album by copying the list of tracks with
bookmarks. Select “Mark” as the group to be copied. See “Album
Copy” (P.54).
■ Playing back tracks in the book-
mark list
1. Press the MULTI JOG knob (ENTER on the remote
control) to turn on the GROUP indicator on the
display.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Mark”.
When selecting “Mark” on a CD
M a r k 1
MARK
L
TOC GROUP
dB
R
–30 –10
–6
–2
0
CD
When selecting “Mark” on the HDD
M a r k 1
G
L
GROUP
dB
R
–30 –10
–6
–2
0
MARK
3. Press w/d to start playback.
Tracks are played in the order that bookmarks have been
placed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
USING ON-SCREEN DISPLAY (OSD)
You can display the list of groups or tracks to be played, copying/recording settings and the list of the setting items on the monitor by
connecting the monitor to this unit.
Memo
The unit does not output video signals when “VIDEO Output” (P.74) is set to “Video Off”. To use the OSD, select “Video On”.
2
List of groups or tracks
Display during recording
The numbers and titles of groups, or the numbers and titles of
tracks are displayed. Press the MULTI JOG knob to switch the list
displayed.
The setting for recording are displayed.
Rec
Mode
Level
Input
:
:
:
Track Synchro
0.0dB
OPTICAL
Grp
Tr.
1
1
2
0:00
Dsc 1: MY DISC
Dsc 2: MY DISC
Dsc 3: CLASSIC
Alb 1: MY BEST
Alb 2: MY BEST
D001…
1
0:00
2
Mark
:
[Bookmark]
Example: when recording to the HDD
List of setting items
Grp
1- Jazz
2- Jazz
3- Classic
4- Classic
5- Classic
Tr.
9
0:00
1
2
The names of items to be set are displayed.
1
2
3
6- Rock
7- Rock
8- Rock
9- Pops
10- Pops
1
2
3
1
2
Album Edit
Track Edit
Disc Edit
Undo
11- Hip Hop
HDD Utility
Sys. Utility
Synchro Setup
DAC Mode
Memo
An asterisk (*) shown on the left of a track name indicates that the
track has been added to the bookmark list.
Example: when setting the menu
Display during copying
Display during titling
The settings for copying are displayed.
This is displayed while the title is being assigned to albums (P.55),
tracks (P.65), or discs (P.69).
≥
Copy
Dsc
3
Tr.
1
Mode
:
:
:
:
All Synchro
0.0dB
Digital Copy
Best Effort
Level
Method
Speed
A
D001…
1
π
1
0:00
ABCDEFGHIJKLMNOPQRSTUVWX
YZabcdefghijklmnopqrstuv
wxyz0123456789!"#$&%'()*
+,-./:;<=>?@[÷]^å {|}`
'
Example: when copying from a CD to the HDD
Example: when titling the track
USING HEADPHONES
Connect your headphones to the PHONES jack and adjust the
volume with the LEVEL control.
NATURAL SOUND HDD/CD RECORDER
POWER
Note
HDD
CDR
COPY
If the power of other components such as an amplifier connected to
this unit is not turned on, the sound of this unit may be distorted. If
this occurs, use the headphones with the other component’s power
turned on.
PHONES
LEVEL
REC
A.M.Q.R.
MIN
MAX
LEVEL control
PHONES jack
25
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM A CD ONTO THE HDD
Memo
■ Copying all tracks on a CD
You can copy all tracks on a CD onto the HDD.
COPY
• In the HDD copy standby mode, you can specify the settings
for HDD copy. For details, refer to “Setting the HDD copy
mode” (P.28) and “Settings HDD copy menu” (P.29).
• You can specify a disc to where data is copied. For details,
refer to “Selecting a target disc” (P.28). (When no disc is
specified, the unit automatically selects the smallest disc
number that does not contain any data.)
MULTI JOG
PUSH ENTER
HDD/CD RECORDER
TEXT/TIME
MODE
MENU
CLEAR
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
HDD
CDR
COPY
REC
H D D
π
ALL SYNC
C D - R W
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
L
A.M.Q.R.
DIG
TOC GROUP
CD
dB
R
–30 –10
–6
–2
0
MIN
MAX
w/d
REC
0 0 1 1 π 1
ALL SYNC
0 0 0
TOC GROUP
–6 –2
L
dB
R
DIG
–30 –10
0
CD
ENTER
COMPLETE
CLEAR
OPEN/CLOSE
3. Press w/d to start copying.
COPY
A. M. Q. R. TIMER REC
REC
TRACK NO.
WRITE
The progress of the copy process is shown in the display.
COPY
HDD
FINALIZE ERASE
INPUT
REC
0 0 1 1 π 1
ALL SYNC
0 0 1
–6 –2
REPEAT RANDOM INTRO TEXT/TIME
CDR
L
dB
R
DIG
TOC GROUP
CD
–30 –10
0
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
The unit applies the following settings (default) if the HDD
copy menu settings (P.29) are never changed.
4
5
6
W/D
STU
VWX
YZ
GROUP SKIP
7
8
9
• Copy Method: “Digital Copy”
SPACE
SYMBOL
10
BOOKMARK
MENU
• Copy Level:
• Copy Speed:
0dB
0
MODE
“Best Effort”
Memo
• It takes a few seconds for this unit to become ready to start
copying after w/d has been pressed.
1. Set the CD in the disc tray.
This unit starts reading the information (type and capacity of
the CD) when the CD is loaded.
• This unit may create some vibration and rotation noise while
performing the copying process by rotating a CD at high
speed.
The following message appears during reading (the process
may take 10 to 20 seconds depending on the disc condition).
To cancel copying, press a.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
R e a d i n g
L
dB
R
–30 –10
–6
–2
0
CD TEXT
When reading the information has been completed, the display
changes as follows, and this unit becomes ready for operation.
If the CD to be copied contains CD TEXT that can be copied,
CD TEXT is automatically copied when the CD is copied onto
the HDD.
Total number of tracks
Total time
Output of the signals during copying
14
6 8 17
L
dB
R
TOC GROUP
CD
–30 –10
–6
–2
0
• During copying at 1x speed, signals are output both from the
ANALOG LINE OUT (PLAY) jack and from the DIGITAL
OUTPUT (OPTICAL/COAXIAL) jacks.
• During copying at 2x speed, signals are output only from the
ANALOG LINE OUT (PLAY) jack.
1
L
dB
R
TOC GROUP
CD
–30 –10
–6
–2
0
• During copying at other than 1x or 2x speed, signals are
output neither from the ANALOG LINE OUT (PLAY) jack
nor the DIGITAL OUTPUT (OPTICAL/COAXIAL) jacks.
2. Press COPY once.
The following message appears on the display, and this unit
enters the HDD copy standby mode. Copying has not been
started yet at this stage.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM A CD ONTO THE HDD
4. Press w/d to start copying.
■ Copying selected tracks on a CD
The progress of the copy process is shown in the display.
You can copy your favorite tracks on a CD onto the HDD.
REC
0 0 3 1 π 1
ALL SYNC
0 0 1
–6 –2
L
dB
R
DIG
TOC GROUP
CD
–30 –10
0
COPY
TRACK NO./BOOKMARK
MARK
MULTI JOG
PUSH ENTER
HDD/CD RECORDER
TEXT/TIME
MODE
MENU
CLEAR
Memo
TRACK NO. COMPLETE
BOOKMARK
• It takes a few seconds for this unit to become ready to start
copying after w/d has been pressed.
3
DIGITAL REC LEVEL
HDD
CDR
COPY
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
• This unit may create some vibration and rotation noise while
performing the copying process by rotating a CD at high
speed.
A.M.Q.R.
MIN
MAX
w/d
To cancel copying, press a.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
ENTER
COMPLETE
CLEAR
OPEN/CLOSE
COPY
A. M. Q. R. TIMER REC
REC
TRACK NO.
WRITE
COPY
HDD
CDR
FINALIZE ERASE
INPUT
REPEAT RANDOM INTRO TEXT/TIME
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
4
5
6
W/D
STU
VWX
YZ
GROUP SKIP
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
0
BOOKMARK
MODE
1. Set the CD in the disc tray, then add bookmarks to
favorite tracks (P.24).
Tracks are listed and stored in order that the bookmarks have
been placed.
Memo
The bookmark placed to the track on the CD will be canceled if
the disc tray is open, or the power of this unit is turned off.
2. Press COPY once.
This unit enters the HDD copy standby mode. Copying has not
been started yet at this stage.
Memo
• In the HDD copy standby mode, you can specify the settings
for HDD copy. For details, refer to “Setting the HDD copy
mode” (P.28) and “Settings HDD copy menu” (P.29).
• You can specify a disc to where data is copied. For details,
refer to “Selecting a target disc” (P.28). (When no disc is
specified, the unit automatically selects the smallest disc
number that does not contain any data.)
3. Press TRACK NO./BOOKMARK (BOOKMARK on the
remote control).
The list of the track that the bookmark is placed to is selected
as the group to be copied (the MARK indicator lights on the
display). Press TRACK NO./BOOKMARK (BOOKMARK on
the remote control) again to return to the normal copy standby
mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM A CD ONTO THE HDD
■ Selecting a target disc
■ Setting the HDD copy mode
In the HDD copy mode, you can specify the number of tracks to be
copied on the HDD.
MULTI JOG
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
CLEAR
Initial setting: All Synchro
TRACK NO. COMPLETE
BOOKMARK
MODE
MULTI JOG
DIGITAL REC LEVEL
COPY
MULTI JOG
PUSH ENTER
ER
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
TEXT/TIME
MODE
MENU
A.M.Q.R.
MIN
MAX
TRACK NO. COMPLETE
BOOKMARK
CLEAR
DIGITAL REC LEVEL
COPY
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
A.M.Q.R.
COAXIAL
ANALOG
MIN
MAX
STU
VWX
YZ
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
t/e, r/y
0
MODE
10
MODE
MENU
ENTER
MODE
H, G
COMPLETE
CLEAR
ENTER
Cursor buttons, ENTER
COMPLETE
CLEAR
TRACK NO.
WRITE
HDD
CDR
TRACK NO.
WRITE
+, –
HDD
+, –
CDR
T
,
Y
GROUP SKIP
GROUP SKIP buttons
GROUP SKIP
While this unit is in the HDD copy standby mode, rotate
the MULTI JOG knob (press +/–, GROUP SKIP buttons, H
or G) to select the disc number to where the data is
copied.
1. Press MODE while this unit is in the HDD copy
standby mode (P.26, 27).
You can select the copying mode.
REC
2. Rotate the MULTI JOG knob (press +/–, H or G on the
0 0 3 1 π 1
ALL SYNC
0 0 0
–6 –2
remote control) to select the copying mode.
L
dB
R
DIG
TOC GROUP
CD
–30 –10
0
Choose one of the modes listed below.
Disc number to make the copy on
All Synchro (All-synchronized copying mode)
This mode copies all of the material from a single audio source
at the same time as the source programs are being played.
Track markers are automatically placed between the tracks
being recorded.
Memo
When a disc number with recorded tracks is selected, new
recordings will be added to the end of the last track that has been
previously recorded.
Multi Synchro (Multi-synchronized copying mode)
This mode copies the set number of tracks at the same time as
the source programs are being played. The number of tracks to
be recorded can be set in the range of 1 to 99 tracks. This mode
is convenient to record a mix of tracks from different sources.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM A CD ONTO THE HDD
3. Press the MULTI JOG knob (ENTER on the remote
■ Setting the HDD copy menu
control) to confirm the copying mode selected.
If “All Synchro” is confirmed, this unit returns to the HDD
copy standby mode.
In the HDD copy menu, you can set the copy method, copy level,
and copy speed.
If “Multi Synchro” is confirmed, the following message
appears on the display. Go to step 4.
MULTI JOG
MENU
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
CLEAR
REC
H o w m a n y
MULT
?
1
0
TRACK NO. COMPLETE
BOOKMARK
L
dB
R
DIG
TOC
CD
–30 –10
–6
–2
3
SYNC
DIGITAL REC LEVEL
COPY
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
MIN
MAX
remote control) to select the number of tracks.
The number can be selected in the 1 to 99 tracks range.
5. Press the MULTI JOG knob (ENTER on the remote
10
control) to confirm the number selected.
MODE
MENU
This unit returns to the copy standby mode.
MENU
ENTER
6. Press t/e or r/y (T, Y,
Q
or
W
on the remote
ENTER
H, G
control) to select the track to start copy from.
COMPLETE
CLEAR
TRACK NO.
WRITE
HDD
+, –
CDR
GROUP SKIP
1. Press MENU while this unit is in the HDD copy
standby mode (P.26, 27).
You can start setting the HDD copying menu.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select a HDD copy menu.
The copying menu (P.30) contains three items as follows:
• Copy Method
• Copy Level
• Copy Speed
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the menu item to be adjusted.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to adjust the parameter.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting when adjustment has
been completed.
6. Press MENU to close the menu.
This unit returns to the HDD copy standby mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM A CD ONTO THE HDD
Copy Method
Copy Speed
Setting of the copying method. Copying may fail if the setting for
“Copy Method” is not correctly made.
Setting of the copying speed.
REC
C o p y S p e e d
REC
L
dB
R
DIG
TOC
CD
–30 –10
–6
–2
0
C o p y M e t h o d
ALL SYNC
L
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
ALL SYNC
Initial setting: Best Effort
Initial setting: Digital Copy
Best Effort
Digital Copy
Copying is made at the maximum speed possible depending on the
“Copy Method” and “Copy Level” settings.
This method always makes digital copies. Copying is not possible if
the tracks are copy protected by the SCMS standard (P.82).
• When “Digital Copy” is selected:
Max. 10x speed (2x speed when copy level is adjusted)
Auto Dig/Anlg
• When “Auto Dig/Anlg” is selected: 2x speed
• When “Analog Copy” is selected: 2x speed
Digital and analog copying are automatically switched depending
on the track. If digital copying is prohibited by the SCMS standard
(P.82), an analog copy is made. For those tracks that can be
digitally copied, a digital copy is made.
2x Copy
Copying is always made at 2x speed.
Analog Copy
1x Copy
This method always makes analog copies.
Copying is always made at 1x speed.
Memo
Memo
• In analog copying, the data may be copied at a lower sound level.
• The setting is stored in the memory and applies to future copying.
• If there are scratches or dust on the CD, the copy speed may drop
automatically even when “Best Effort” is selected.
• The setting is stored in the memory and applies to future copying.
Copy Level
Setting of the sound level for copying. Sound level adjustment is
not normally necessary. However it is possible to adjust the copying
sound level to suit you needs.
REC
C o p y L e v e l
L
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
ALL SYNC
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps.
REC
LEVEL
L e v e l
0 . 0 d B
L
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
ALL SYNC
Memo
• Level adjustment is not possible during copying.
• If the red part on the peak level meter lights at the loudest sound
levels, stop copying to adjust the copying level, and then resume
copying.
• If the level is adjusted, copying is made at maximum 2x speed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
■ Recording input audio source
You can make recordings from the component such as a cable TV tuner or DVD player connected to this unit.
Note
This unit cannot input digital signals other than PCM signals.
Memo
Recording onto the HDD is made in the unit called “disc”. The maximum length of one disc on the HDD is 179 minutes 59 seconds. If the
recording has been made exceeding the maximum length, the recording will be made continuously to the next available disc.
3
ENTER
COMPLETE
CLEAR
OPEN/CLOSE
w/d
COPY
A. M. Q. R. TIMER REC
REC
TRACK NO.
WRITE
MULTI JOG
PUSH ENTER
HDD/CD RECORDER
REC
HDD
FINALIZE ERASE
INPUT
TEXT/TIME
MODE
MENU
CLEAR
TRACK NO. COMPLETE
BOOKMARK
INPUT
REPEAT RANDOM INTRO TEXT/TIME
CDR
DIGITAL REC LEVEL
HDD
CDR
COPY
ABC
DEF
GHI
ANALOG REC LEVEL
1
2
3
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
A
JKL
MNO
PQR
MIN
MAX
4
5
6
W/D
STU
VWX
YZ
GROUP SKIP
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
REC
INPUT
a
0
MODE
1. Press REC while the HDD is selected (P.14).
5. Start playing the source.
The HDD mark flashes, and the disc and track numbers to be
recorded are indicated on the display. Recording has not been
started yet at this stage. (HDD recording standby mode)
Press w/d to stop recording temporarily. The HDD mark
flashes and the track number is advanced to the next.
Press w/d to resume recording.
REC
D 0 0 2 1
0 0 0
–6 –2
Memo
L
dB
R
GROUP
–30 –10
0
SYNC
This unit automatically adds track markers to track data while
recording external audio sources. To add track markers
manually, refer to “Adding track markers during recording
(Manual track marking)” (P.37).
Disc number to be Track number to be recorded
recorded
Memo
6. Press a to stop recording.
• In the HDD recording standby mode, you can specify the
settings for HDD recording. For details, refer to “Setting the
HDD recording mode” (P.35).
The first track number of the disc at which recording has been
stopped is indicated on the display.
D 0 0 2 1
G
• You can specify a disc to where data is copied. For details,
refer to “Selecting a target disc” (P.28). (When no disc is
specified, the unit automatically selects the smallest disc
number that does not contain any data.)
L
GROUP
dB
R
–30 –10
–6
–2
0
IMPORTANT
2. Select the input source to be recorded.
• Never turn off the power of this unit during recording.
Recording may not be correctly made, or the data on the HDD
may be damaged.
The lamp for the selected input (OPTICAL, COAXIAL, or
ANALOG) lights.
• During recording, make sure that this unit is not subjected to
shock or vibration as the HDD may be damaged.
3. Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
(P.34) to suit your needs.
4. Press w/d to start recording.
REC
D 0 0 2 1
0 0 1
–6 –2
L
dB
R
–30 –10
0
SYNC
31
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
■ Using an external timer to record
Notes on recording time setting
• This unit is not equipped with the clock function. Use an external timer when making a timer recording.
• It may take 30 seconds to 1 minute after the power of this unit is turned on by an external timer until an actual recording starts. (This length
of time is subject to change depending on the condition.) During this time, no recording is made. Therefore set the time that is 2-minute
earlier than the starting time of the program to be recorded for turning on this unit.
• As a characteristic of an HDD recorder, it is necessary to store information to control audio data as well as audio data itself. This informa-
tion is normally recorded when recording is stopped. Therefore if the power of this unit is turned off before recording is stopped, no
information to control audio data and no audio data are stored. Set the time that is longer than 3-minute after the program to be recorded
finishes for turning off this unit by an external timer.
• Set the time that is 2-minute longer than actual recording time for the total recording time.
Following chart indicates the time flow when this unit makes timer recordings.
Time to be set on the external timer
(2 minutes + recording time + 3 minutes or longer)
Recording time to be set on the CDR-HD1500
(Recording time + 2 minutes)
Recording time
Program starting time
CDR-HD1500 starts recording
(30 seconds to 1 minute after the
external timer turns on.)
Program ending time
External timer turns off
External timer turns on
CDR-HD1500 finishes
recording
Time flow
Example:To record the program that starts at 9:00 and ends at 10:00.
• Set the external timer to be turned on at 8:58.
• Set the external timer to be turned off after 10:03.
• Set 1 hour 2 minutes for the total recording time on this unit.
Memo
• Actual recorded material includes a little more than the set amount of time at both beginning and end of the recording. Delete unnecessary
parts using the editing operation.
• Recording will be stopped if copy protected digital signals are input while timer recording is being made.
• If you set the total recording time over 179 minutes 59 seconds, recording will be made extending several discs. To play the recorded
materials sequentially, select “Style All” as the play style (P.20).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
Setting for a timer recording
Memo
• You cannot set a timer recording for CD-R and CD-RW copying.
• You can skip to step 3 in the following procedure by pressing TIMER REC on the remote control.
COPY
A. M. Q. R. TIMER REC
REC
REC
FINALIZE ERASE
INPUT
3
REPEAT RANDOM INTRO TEXT/TIME
ABC
DEF
GHI
1
2
3
JKL
MNO
PQR
MULTI JOG
4
5
6
STU
VWX
YZ
MULTI JOG
PUSH ENTER
URAL SOUND HDD/CD RECORDER
7
8
9
TEXT/TIME
MODE
MENU
CLEAR
SPACE
SYMBOL
10
BOOKMARK
MENU
TRACK NO. COMPLETE
BOOKMARK
0
DIGITAL REC LEVEL
MODE
HDD
CDR
COPY
L
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MAX
MIN
MAX
ENTER
Cursor buttons, ENTER
COMPLETE
CLEAR
REC t/e, r/y
TRACK NO.
WRITE
HDD
CDR
+, –
E, R
1. Carry out steps 1 and 2 in “Recording input audio
5. Leave the power of this unit on. Turn off the power
source” (P.31).
of this unit by the external timer.
For the HDD recording mode (P.35), select one of “Manual”
(manual recording), “Track Synchro” (track-synchronized
recording) or “Auto Period” (auto-period recording). Other
modes cannot be selected when timer recording is made.
If the power of this unit is turned on by the external timer,
“Timer Standby” flashes for approximately five seconds. Then
recording starts according to the setting.
Memo
2. Press and hold REC for approximately three seconds
Once timer recording is set, recording starts every time the power of
this unit is turned on. To cancel the setting, press a while “Timer
Standby” is flashing, or while recording is being made.
(press TIMER REC on the remote control).
The following screen appears in the display.
REC
T . S p a n
1h 2 m
L
dB
R
–30 –10
–6
–2
0
SYNC
TIME
3. Press t/e or r/y (press E, R,
Q
or
W
on the
remote control) to switch between hour and minute,
then rotate the MULTI JOG knob (press +/–, H or G on
the remote control) to adjust the total recording time.
4. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the total time of timer recording.
“Timer Standby” appears on the display.
T i m e r S t a n d b y
L
dB
R
–30 –10
–6
–2
0
G
To cancel timer recording setting, press a.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
■ Adjusting the recording level
There is an adjusting procedure for each input source to be recorded as explained below. Choose the one for your input source and follow the
steps.
10
MODE
MENU
MENU
ENTER
MULTI JOG
MENU
H, G
ENTER
COMPLETE
CLEAR
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
TRACK NO.
WRITE
TRACK NO. COMPLETE
BOOKMARK
CLEAR
HDD
DIGITAL REC LEVEL
+, –
COPY
CDR
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MIN
MAX
ANALOG REC LEVEL
GROUP SKIP
Memo
When recording a digital input source
(OPTICAL, COAXIAL)
The digital recording level is set to 0dB, the level of the input
source, as an initial setting. Further adjustment is not normally
necessary. However it is possible to adjust the recording level to
suit your needs.
• The recording level can be adjusted while this unit is in either the
recording or recording standby mode. Once recording has been
stopped, the recording level is reset to 0dB.
• Adjustment of the recording level can be canceled by pressing
MENU when the level is adjusted in the recording standby mode.
• The recording level is set to 0dB by pressing CLEAR when the
level is adjusted in the recording standby mode.
1. Press MENU while this unit is in the HDD recording
standby mode (P.31).
The following screen appears on the display.
When recording an analog input source
(ANALOG)
REC
LEVEL
L e v e l
0 . 0 d B
L
dB
R
–30 –10
–6
–2
0
1. Play the loudest passage (highest sound level) of the
SYNC
source to be recorded.
2. Play the loudest passage (highest sound level) of the
2. Adjust the recording level by rotating the ANALOG
source to be recorded.
REC LEVEL control.
Rotate the control clockwise to increase the level and
counterclockwise to decrease the level.
3. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to adjust the recording level.
Adjust the recording level so that the red part on the peak level
meter does not light at the loudest sound levels.
Memo
The recording level can be adjusted while this unit is in either the
recording or recording standby mode.
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps.
Adjust the recording level so that the red part on the peak level
meter does not light at the loudest sound levels.
4. Press the MULTI JOG knob (ENTER on the remote
control) to return to the previous display.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
3. Press the MULTI JOG knob (ENTER on the remote
■ Setting the HDD recording mode
control) to confirm the recording mode selected.
If “Manual”, “Track Synchro” or “All Synchro” is confirmed,
this unit returns the HDD recording standby mode.
This unit provides various recording modes. Choose the mode that
suits your needs.
If “Multi Synchro” is confirmed, following message appears on
the display. Follow the “When Multi Synchro is selected”
procedure below.
Initial setting: Track Synchro
MODE MULTI JOG
MULTI JOG
ER
PUSH ENTER
TEXT/TIME
MODE
MENU
REC
3
H o w m a n y
SYNC
?
1
0
TRACK NO. COMPLETE
BOOKMARK
CLEAR
L
dB
R
–30 –10
–6
–2
MULT
DIGITAL REC LEVEL
COPY
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
If “Auto Period” is confirmed, following message appears on
the display. Follow the “When Auto Period is selected”
procedure below.
A.M.Q.R.
MIN
MAX
t/e, r/y
REC
P e r i o d
?
3 0 0
–30 –10 –6 –2
L
dB
R
AUTO PRD
10
0
TIME
MODE
MENU
MODE
(When Multi Synchro is selected)
ENTER
Cursor buttons, ENTER
4. Rotate the MULTI JOG knob (press +/–, H or G on the
COMPLETE
CLEAR
remote control) to specify the number of tracks.
TRACK NO.
WRITE
The number can be set in the 1 to 99 tracks range.
HDD
+, –
5. Press the MULTI JOG knob (ENTER on the remote
CDR
control) to confirm the number of tracks to be set.
This unit returns to the HDD recording standby mode.
E, R
(When Auto Period is selected)
4. Press t/e or r/y (press E, R,
Q
or
W
on the
1. Press MODE while this unit is in the HDD recording
remote control) to switch between hour and minute,
then rotate the MULTI JOG knob (press +/–, H or G on
the remote control) to adjust the time length between
track markers.
standby mode (P.31).
The recording mode can be selected.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select the HDD recording mode.
The time length can be set in the 10 seconds to 30 minutes
range by 10-seconds steps.
Choose one of the modes listed below.
5. Press the MULTI JOG knob (ENTER on the remote
Manual (Manual recording mode)
control) to confirm the setting.
All the recording operations including starting, stopping and
track marking are performed manually.
The following screen appears on the display.
Track Synchro (Track-synchronized recording mode)
REC
T o t a l
?
0 h 4 m
Starting and stopping are performed manually. Track markers
are automatically placed between the tracks being recorded.
L
AUTO PRD
dB
R
–30 –10
–6
–2
0
TIME
Multi Synchro (Multi-synchronized recording mode)
6. Press t/e or r/y (press E, R,
Q
or
W
on the
This mode records the set number of tracks at the same time as
the source programs are being played. The number of tracks to
be recorded can be set in the range of 1 to 99 tracks. This mode
is convenient to record a mix of tracks from different sources.
remote control) to switch between hour and minute,
then rotate the MULTI JOG knob (press +/–, H or G on
the remote control) to adjust the total recording time.
7. Press the MULTI JOG knob (ENTER on the remote
All Synchro (All-synchronized recording mode)
control) to confirm the total recording time.
This mode records all of the material from a single audio
source at the same time as the source programs are being
played. Track markers are automatically placed between the
tracks being recorded.
This unit returns to the HDD recording standby mode.
Memo
• When recording to the HDD in the auto period recording mode,
the recording will be performed continuously to the next available
disc if the time length between selected track markers exceeds the
group remaining time.
Auto Period (Auto-period recording mode)
This mode makes recording for the set amount of time while
placing track markers at the set time interval. The length
between track markers can be adjusted in the 10 seconds to 30
minutes range by 10-second steps. This mode is convenient to
search for material recorded from FM broadcasts.
• In the auto period recording mode, a time error can occur in a
frame unit. Therefore, the time of each track or the group total
time may not match the confirmed time length between selected
track markers or the total recording time.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
Int.Time
Setting a condition for synchronized
recording
This unit automatically detects track intervals when recording is
made in track-synchronized recording mode, multi-synchronized
recording mode, or all-synchronized recording mode. You can set
the condition for detecting track intervals. Setting items are as
follows.
Sets the length of silence (“no signal”) that judges track intervals.
When the set amount of silence continues, this unit judges it as a
track interval and places a track marker.
Initial setting: 2.0 seconds, Control range: 0.5 to 5.0 seconds
End Duration
Sets the length of silence (“no signal”) that judges the end of
playback when recording in the all-synchronized recording mode.
When the set amount of silence continues, recording will be
stopped.
MULTI JOG
MENU
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
CLEAR
TRACK NO. COMPLETE
BOOKMARK
Initial setting: 12.0 seconds, Control range: 2.0 to 60.0 seconds
DIGITAL REC LEVEL
COPY
Memo
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
Settings for “Int. Time” and “End Duration” apply to each input
jack.
MIN
MAX
5. Press the MULTI JOG knob (ENTER on the remote
10
control) to confirm the setting item.
MODE
MENU
If “OPT TH Level”, “COAX TH Level” or “ANLG TH Level”
is confirmed, follow the “When OPT TH Level, COAX TH
Level, or ANLG TH Level is selected” procedure below.
MENU
ENTER
ENTER
H, G
COMPLETE
CLEAR
If “Int. Time” or “End Duration” is confirmed, follow the
“When Int. Time or End Duration is selected” procedure below.
TRACK NO.
WRITE
HDD
(When OPT TH Level, COAX TH Level, or ANLG TH Level
is selected)
+, –
CDR
6. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to adjust the level.
Level can be set by 1dB step.
1. Press MENU while this unit is in the stop mode.
Menu item selection appears on the display.
Example: To set “ANLG TH Level”
2. Rotate the MULTI JOG knob (press +/–, H or G on the
LEVEL
A N L G T H - 4 0 d B
remote control) to select “Synchro Setup”.
L
dB
R
–30 –10
–6
–2
0
S y n c h r o S e t u p
L
7. Press the MULTI JOG knob (ENTER on the remote
dB
R
–30 –10
–6
–2
0
control) to confirm the level.
Setting item selection appears on the display.
3. Press the MULTI JOG knob (ENTER on the remote
(When Int.Time or End Duration is selected)
control).
Setting item selection appears on the display.
6. Rotate the MULTI JOG knob (+/–, H or G on the
remote control) to set an interval.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select a setting item.
“Int. Time” can be set by 0.5-second steps, and “End Duration”
can be set by 1.0-second steps.
OPT TH Level
Example: To set “Int.Time”
Sets the signal level that judges the signals input through the
DIGITAL IN (OPTICAL) jack as “no signal”.
T i m e
2 . 0 s e c
Initial setting: –50dB, Control range: –90 to –20dB
L
dB
R
–30 –10
–6
–2
0
TIME
COAX TH Level
Sets the signal level that judges the signals input through the
DIGITAL IN (COAXIAL) jack as “no signal”.
7. Press the MULTI JOG knob (ENTER on the remote
control) to set an interval.
Initial setting: –50dB, Control range: –90 to –20dB
Setting item selection appears on the display.
ANLG TH Level
Press MENU twice to close the menu and return to the normal stop
mode.
Sets the signal level that judges the signals input through the
ANALOG LINE IN (REC) jacks as “no signal”.
Initial setting: –40dB, Control range: –60 to –20dB
36
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
■ Adding track markers during recording (Manual track marking)
10
MODE
MENU
ENTER
TRACK NO./BOOKMARK
COMPLETE
CLEAR
MULTI JOG
PUSH ENTER
ER
3
TEXT/TIME
MODE
MENU
CLEAR
TRACK NO.
WRITE
HDD
TRACK NO. COMPLETE
BOOKMARK
TRACK NO.
WRITE
DIGITAL REC LEVEL
COPY
CDR
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
MIN
MAX
GROUP SKIP
This unit can automatically place track markers. However you can
also manually place track markers during recording. (Manual track
marking)
Memo
• The track markers may not be placed properly even if the
recording has been performed in the synchronized recording
according to the type of the source devices. To avoid this
problem, place the track markers manually.
Press TRACK NO./BOOKMARK (TRACK NO. WRITE on
the remote control) during your recording.
• Manual track marking is possible even during synchronized
recording.
• A new track number is added at the location on the disc
corresponding to the time TRACK NO./BOOKMARK (TRACK
NO. WRITE on the remote control) is pressed.
• You can place the track markers to the tracks that have been
recorded on the HDD by dividing the track. For details, refer to
“Track Divide” (P.62).
• Manual track marking is possible after the recording has been
performed for 5 seconds from the beginning of the track, and a
disc cannot contain more than 99 tracks. Even if there is time
remaining on the disc, further recording is impossible once 99
track markers have been placed.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Copying all tracks in a group to a disc
You can copy all tracks in a whole group of discs, albums or bookmark list.
MODE
MENU
OPEN/CLOSE
ENTER
H, G
COPY
MULTI JOG
COPY
A. M. Q. R. TIMER REC
REC
COMPLETE
CLEAR
COPY
MULTI JOG
PUSH ENTER
RECORDER
FINALIZE ERASE
INPUT
TEXT/TIME
MODE
MENU
CLEAR
TRACK NO.
WRITE
FINALIZE
TRACK NO. COMPLETE
BOOKMARK
REPEAT RANDOM INTRO TEXT/TIME
HDD
DIGITAL REC LEVEL
ABC
DEF
GHI
CDR
COPY
CDR
1
2
3
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
JKL
MNO
PQR
+, –
MIN
MAX
4
5
6
STU
VWX
YZ
7
8
9
W/D
SPACE
SYMBOL
10
BOOKMARK
MENU
FINALIZE w/d
GROUP SKIP
0
MODE
GROUP SKIP buttons
1. Set a new or not finalized CD-R (or CD-RW) disc in
2. Press COPY twice.
the disc tray.
The following message appears on the display, and this unit
enters in the CDR copy standby mode. Copying has not been
started yet at this stage.
This unit starts reading the information (type and capacity of a
CD-R or a CD-RW disc) when a CD-R or a CD-RW disc is
loaded.
Memo
The following message appears during reading (the process
may take 10 to 20 seconds depending on the disc condition).
In the CDR copy standby mode, you can specify the settings
for disc copy. For details, refer to “Setting the CDR copy
mode” (P.42) and “Setting the CDR copy menu” (P.43).
R e a d i n g
L
dB
R
–30 –10
–6
–2
0
REC
H D D
“
C D - R W
L
GROUP
dB
R
–30 –10
–6
–2
0
ALL SYNC ANLG
CDR
When reading the information has been completed, the display
changes as follows, and this unit becomes ready for operation.
When copying onto a CD-R or CD-RW disc without
finalization
REC
0 0 3 1 “ 1
ALL SYNC ANLG
0 0 0
–6 –2
The number of recorded tracks Total recorded time
L
dB
R
GROUP
–30 –10
0
CDR
14
1
6 8 17
–30 –10 –6 –2 0
L
dB
R
GROUP
3. Rotate the MULTI JOG knob (press +/–, GROUP SKIP
buttons, H or G on the remote control) to select a
group to be copied onto the disc.
CDR
The following screen appears on the display depending on the
type of group you selected.
L
dB
R
GROUP
Memo
–30 –10
–6
–2
0
CDR
You can create a CD with high quality sounds using the Audio
Master Quality Recording feature. For details, refer to
“Copying high quality sounds (Audio Master Quality
Recording)” (P.41).
When copying onto a new CD-R or CD-RW disc
N e w D i s c
L
GROUP
dB
R
–30 –10
–6
–2
0
CDR
0
L
dB
R
GROUP
–30 –10
–6
–2
0
CDR
38
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
Notes
When a disc is selected:
• If copying is canceled by pressing a, only the data that has
been recorded on the CD-R or CD-RW disc before the
cancellation remains on the disc. When “Digital Move”
(P.43) is selected, the original data on the HDD that have
already been copied to a CD-R or CD-RW disc will be
deleted.
REC
0 0 3 1 “ 1
ALL SYNC ANLG
0 0 0
–6 –2
L
dB
R
GROUP
–30 –10
0
CDR
CDR
CDR
When an album is selected:
REC
• CD TEXT is copied only when selecting “Full Auto” in the
CDR copy mode for a new CD-R or CD-RW disc.
0 0 3 1 “ 1
ALL SYNC ANLG
0 0 0
–6 –2
L
dB
R
ALBM
GROUP
–30 –10
0
REC
R e c o r d i n g
1%
–2
When a bookmark is selected:
L
AUTO
SYNC ANLG
GROUP
dB
R
–30 –10
–6
0
MARK
CDR
4
REC
M r k 1 “ 1
ALL SYNC ANLG
0 0 0
–6 –2
• When the Audio Master Quality Recording is set or the
message “Recording” appears on the display, you cannot
cancel the copy process by pressing a.
L
GROUP
dB
R
–30 –10
0
MARK
4. Press w/d to start copying.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
The progress of the copy process is shown in the display.
REC
5. To carry out the finalization process (P.47), press
0 0 3 1 “ 1
ALL SYNC ANLG
0 0 1
–6 –2
L
dB
R
GROUP
FINALIZE.
–30 –10
0
CDR
The unit applies the following settings (default) if the CDR
copy menu settings (P.43) are never changed.
• Copy Method: “Digital Copy”
• Copy Level:
0dB
• Copy Speed: “Best Effort”
Memo
• The OPC (Optimum Power Control) feature may start
automatically depending on disc conditions. In this case, the
message “OPC Adjust” appears on the display until the
adjustment is done (about 10 seconds) before the copy
process starts.
• The progress of elapsed time for the track being copied may
vary by the data processing inside this unit.
To cancel copying, press a.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Copying selected tracks on the HDD
You can copy favorite tracks on the HDD to a CD-R or CD-RW disc.
MODE
MENU
OPEN/CLOSE
ENTER
H, G
COPY
A. M. Q. R. TIMER REC
REC
COPY
MULTI JOG
COMPLETE
CLEAR
COPY
FINALIZE ERASE
INPUT
MULTI JOG
PUSH ENTER
RECORDER
TRACK NO.
WRITE
FINALIZE
TEXT/TIME
MODE
MENU
CLEAR
REPEAT RANDOM INTRO TEXT/TIME
HDD
TRACK NO. COMPLETE
BOOKMARK
ABC
DEF
GHI
DIGITAL REC LEVEL
CDR
1
2
3
CDR
COPY
INPUT
ANALOG REC LEVEL
JKL
MNO
PQR
+, –
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
4
5
6
MIN
MAX
STU
VWX
YZ
7
8
9
W/D
SPACE
SYMBOL
10
BOOKMARK
MENU
GROUP SKIP
0
FINALIZE w/d
MODE
GROUP SKIP buttons
1. Set a new or not finalized CD-R (or CD-RW) disc in
the disc tray, then select the HDD and add book-
marks to favorite tracks (P.24).
Memo
The OPC (Optimum Power Control) feature may start
automatically depending on disc conditions. In this case, the
message “OPC Adjust” appears on the display until the
adjustment is done (about 10 seconds) before the copy process
starts.
Tracks are listed and stored in order that the bookmarks have
been placed.
2. Press COPY twice.
This unit enters the CDR copy standby mode. Copying has not
been started yet at this stage.
Note
CD TEXT is copied only when selecting “Full Auto” in the
CDR copy mode for a new CD-R or CD-RW disc.
Memo
In the CDR copy standby mode, you can specify the settings
for disc copy. For details, refer to “Setting the CDR copy
mode” (P.42) and “Setting the CDR copy menu” (P.43).
REC
R e c o r d i n g
1%
–2
L
AUTO
SYNC ANLG
GROUP
dB
R
–30 –10
–6
0
MARK
CDR
3. Rotate the MULTI JOG knob (press +/–, GROUP SKIP
buttons, H or G on the remote control) to select
“Mrk”.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
5. To carry out the finalization process (P.47), press
Memo
FINALIZE.
You can create a CD with high quality sounds using the Audio
Master Quality Recording feature. For details, refer to
“Copying high quality sounds (Audio Master Quality
Recording)” (P.41).
REC
M r k 1 “ 1
ALL SYNC ANLG
0 0 0
–6 –2
L
dB
R
GROUP
–30 –10
0
MARK
CDR
4. Press w/d to start copying
The progress of the copy process is shown in the display.
REC
M r k 1 “ 1
ALL SYNC ANLG
0 0 1
–6 –2
L
dB
R
GROUP
–30 –10
0
MARK
CDR
40
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Copying high quality sounds (Audio Master Quality Recording)
You can make your own CD with high quality sound with the Audio Master Quality Recording feature.
Notes
• Audio Master Quality Recording can be used only for copying from the HDD on a new CD-R disc.
• Recordable time is 63 minutes for a 74-minute CD-R disc, and 68 minutes for a 79-minute CD-R disc.
• Since “Digital Move” is automatically selected for “Copy Method” (P.43), the group or track data copied to a CD-R disc will be erased
after copying.
ENTER
4
COMPLETE
CLEAR
OPEN/CLOSE
COPY
A. M. Q. R. TIMER REC
REC
MULTI JOG
PUSH ENTER
HDD/CD RECORDER
TRACK NO.
WRITE
TEXT/TIME
MODE
MENU
CLEAR
HDD
A.M.Q.R.
FINALIZE ERASE
INPUT
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
REPEAT RANDOM INTRO TEXT/TIME
CDR
HDD
CDR
COPY
ABC
DEF
GHI
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
1
2
3
MIN
MAX
JKL
MNO
PQR
4
5
6
W/D
STU
VWX
YZ
GROUP SKIP
7
8
9
w/d
A.M.Q.R.
SPACE
SYMBOL
10
BOOKMARK
MENU
0
MODE
1. Press A.M.Q.R. while the unit is in the CDR copy
Notes
• When total time of the group to be copied exceeds recordable
time on a CD-R disc (63 minutes for a 74-minute CD-R disc and
68 minutes for an 79-minute CD-R disc), the following message
appears on the display. In this case, Audio Master Quality
Recording cannot be used.
standby mode (P.40, 42).
The A.M.Q.R. indicator lights up on the display.
A.M.Q.R.
2. Press w/d to start copying.
REC
N o E n o u g h S p c
L
A.M.Q.R.AUTO
DIGM
GROUP
dB
R
–30 –10
–6
–2
0
REC
SYNC
CDR
A M Q R
1%
–2
L
dB
R
A.M.Q.R.AUTO
SYNC
DIGM
GROUP
–30 –10
–6
0
CDR
• If you select the album with its tracks’ level adjusted as the group
to be copied, the following message appears on the display. In this
case, Audio Master Quality Recording cannot be used.
The copying conditions are as follows:
• Copy Method: “Digital Move”
REC
• Copy Level:
• Copy Speed:
0dB
C a n ' t T r . L e v .
L
A.M.Q.R.AUTO
DIGM
GROUP
Best Effort
dB
R
–30 –10
–6
–2
0
SYNC
CDR
Notes
• When a CD-R disc other than a 74-minute, 79-minute or 4x
writing compatible CD-R disc is loaded, or a CD-RW disc is
loaded on this unit, the following message appears on the display.
In this case, Audio Master Quality Recording cannot be used.
• Once copying starts, no button operation is effective until
copying is completed.
• Never turn off the power of this unit or unplug the AC power
cord during copying.
REC
When copying has been completed, the operation of
the HDD and the CD automatically stops.
U n a v a i la b le
L
A.M.Q.R.AUTO
DIGM
GROUP
dB
R
–30 –10
–6
–2
0
SYNC
CDR
41
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Setting the CDR copy mode
In the CDR copy mode, you can specify the number of tracks to be copied on the HDD or enable/disable the auto-finalization feature.
Initial setting: All Synchro
10
MODE
MENU
MODE
MULTI JOG
MODE
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
ENTER
H, G
ENTER
TRACK NO. COMPLETE
BOOKMARK
CLEAR
COMPLETE
CLEAR
DIGITAL REC LEVEL
COPY
TRACK NO.
WRITE
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
HDD
A.M.Q.R.
MIN
MAX
+, –
CDR
1. Press MODE while this unit is in the CDR copy
4. Rotate the MULTI JOG knob (press +/–, H or G on the
standby mode (P.30, 40).
remote control) to select the number of tracks.
The number can be selected in the 1 to 99 tracks range.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select the CDR copy mode.
5. Press the MULTI JOG knob (ENTER on the remote
Choose one of the modes listed below.
control) to confirm the number selected.
This unit returns to the CDR copy standby mode.
All Synchro (All-synchronized copying mode)
This mode copies all of the material from a single audio source
at the same time as the source programs are being played.
Track markers are automatically placed between the tracks
being recorded.
6. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select the group and track to start
copy from.
While the GROUP indicator lights, you can select a group, and
while the TRACK indicator lights, you can select a track. For
details, refer to “SELECTING THE GROUP OR TRACK
MODE” (P.15).
Full Auto (Full auto-synchronized copying mode)
This mode automatically performs finalization after all
synchronized copying is complete. A CD-R disc can be played
as a CD as soon as finalization has been completed.
Note
CD TEXT is copied only when selecting “Full Auto” in the
CDR copy mode for a new CD-R or CD-RW disc.
Multi Synchro (Multi-synchronized copying mode)
This mode copies the set number of tracks at the same time as
the source programs are being played. The number of tracks to
be recorded can be set in the range of 1 to 99 tracks. This mode
is convenient to record a mix of tracks from different sources.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the CDR copy mode selected.
If “All Synchro” or “Full Auto” is confirmed, this unit returns
to the CDR copy standby mode.
If “Multi Synchro” is confirmed, the following message
appears on the display. Go to step 4.
REC
H o w m a n y
MULT
?
1
0
L
dB
R
–30 –10
–6
–2
SYNC ANLG
CDR
42
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
Copy Method
Setting of the copying method. Copying may fail if the setting for
“Copy Method” is not correctly made.
■ Setting the CDR copy menu
In the CDR copy menu, you can set the copy method, copy level,
copy speed, and imaging speed.
REC
C o p y M e t h o d
MULTI JOG
MENU
L
dB
R
–30 –10
–6
–2
0
ALL SYNC ANLG
CDR
MULTI JOG
PUSH ENTER
ER
TEXT/TIME
MODE
MENU
CLEAR
Initial setting: Analog Copy
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
Analog Copy
COPY
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
This method always makes analog copies.
A.M.Q.R.
MIN
MAX
4
Digital Move
The data is moved from the HDD to the CD. Therefore, the track or
group data will be deleted from the HDD after they have been
moved to the CD-R or CD-RW disc by this method.
10
MODE
MENU
MENU
ENTER
Digital Copy
ENTER
H, G
This method always makes digital copies. Copying is not possible if
the tracks are copy protected by the SCMS standard (P.82).
COMPLETE
CLEAR
Auto Dig/Anlg
TRACK NO.
WRITE
HDD
Digital and analog copying are automatically switched depending
on the track. If digital copying is prohibited by the SCMS standard
(P.82), an analog copy is made. For those tracks that can be
digitally copied, a digital copy is made.
+, –
CDR
Memo
1. Press MENU while this unit is in the CDR copy
• In analog copying, the data may be copied at a lower sound level.
standby mode (P.38, 40).
• The settings is stored in the memory and applied to future
copying.
2. In the HDD copy menu, you can set the copy method,
copy level, copy speed, and imaging speed.
• When copy level is adjusted or when carrying out Analog Copy,
the unit automatically creates an image file on the HDD before
starting the disc copy process.
The copying menu (P.43-44) contains four items as follows:
• Copy Method
• Copy Level
• Copy Speed
• Imaging Speed
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the menu item to be adjusted.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to adjust the parameter for each item.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting when adjustment has
been completed.
6. Press MENU to close the menu.
This unit returns to the CDR copy standby mode.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
Copy Level
Copy Speed
Setting of the sound level for copying. Sound level adjustment is
not normally necessary. However it is possible to adjust the copying
sound level to suit you needs.
Setting of the copying speed.
REC
C o p y S p e e d
L
dB
R
–30 –10
–6
–2
0
ALL SYNC ANLG
CDR
REC
C o p y L e v e l
L
dB
R
–30 –10
–6
–2
0
ALL SYNC ANLG
CDR
Initial setting: Best Effort
Best Effort
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps.
Copying is made at Max. 8x speed for a CD-R disc and 4x speed
for a CD-RW disc.
REC
LEVEL
L e v e l
0 . 0 d B
4x Copy
L
dB
R
–30 –10
–6
–2
0
ALL SYNC ANLG
CDR
Copying is always made at 4x speed.
Memo
Memo
• Level adjustment is not possible during copying.
• Depending on the condition of the CD-R disc, the copy speed
may drop automatically even when “Best Effort” is selected.
• If the red part on the peak level meter lights at the loudest sound
levels, stop copying to adjust the copying level, and then resume
copying.
• When “Analog Copy” or “Auto Dig/Anlg” is selected in “Copy
Method” (P.43), the unit automatically creates an image file on
the HDD with 1x or 2x speed before starting the disc copy
process.
• When copy level is adjusted, the unit automatically creates an
image file on the HDD with 1x or 2x speed before starting the
disc copy process.
• The settings is stored in the memory and applied to future
copying.
Imaging Speed
Setting of the imaging speed applied for an analog copy.
REC
Im a g i n g S p e e d
L
dB
R
–30 –10
–6
–2
0
ALL SYNC ANLG
CDR
Initial setting: 2x
2x
An image file is made at 2x speed.
1x
An image file is made at 1x speed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
DUPLICATING A CD
This unit equips the Duplicate feature that enables to create a copy CD easily and quickly.
Note
Duplication may not correctly made on a CD-R or CD-RW disc that does not support high speed writing. In this case, copy a CD onto the
HDD first, then perform “Digital Move” on a CD-R or CD-RW disc at 4x speed.
ENTER
COMPLETE
CLEAR
OPEN/CLOSE
COPY
A. M. Q. R. TIMER REC
REC
TRACK NO.
WRITE
w/d
COPY
COPY
HDD
FINALIZE ERASE
INPUT
MULTI JOG
PUSH ENTER
HDD/CD RECORDER
TEXT/TIME
MODE
MENU
CLEAR
REPEAT RANDOM INTRO TEXT/TIME
CDR
4
TRACK NO. COMPLETE
BOOKMARK
ABC
DEF
GHI
DIGITAL REC LEVEL
1
2
3
HDD
CDR
COPY
JKL
MNO
PQR
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
4
5
6
A.M.Q.R.
W/D
MIN
MAX
STU
VWX
YZ
GROUP SKIP
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
0
MODE
1. Set the original CD in the disc tray.
3. Press w/d to start copying from the CD onto the HDD.
The copying conditions are as follows:
This unit starts reading the information (type and capacity of a
CD) when a CD is loaded.
• Copy Method: “Digital Copy”
The following message appears during reading (the process
may take 10 to 20 seconds depending on the disc condition).
• Copy Level:
• Copy Speed:
0dB
“Best Effort”
R e a d i n g
Notes
L
dB
R
–30 –10
–6
–2
0
• If copying is canceled by a being pressed, even the data that
has been copied before cancellation does not remain on the
HDD.
When reading the information has been completed, the display
changes as follows, and this unit becomes ready for operation.
• If a track is copy protected by the SCMS standard (P.82), that
track cannot be copied onto the HDD.
Total number of tracks Total time
When copying from the CD onto the HDD has been
completed, the following message appears on the
display.
14
6 8 17
–30 –10 –6 –2 0
L
dB
R
TOC GROUP
CD
REC
C h a n g e D i s c s !
L
DUPLCT
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
ALL SYNC
1
L
dB
R
TOC GROUP
CD
–30 –10
–6
–2
0
4. Set a new CD-R or CD-RW disc in the disc tray.
The unit starts to read the disc information, then starts copying
track data from the HDD to a CD-R or CD-RW disc.
2. Press COPY three times.
The following message appears on the display, and this unit
enters the duplicate standby mode. Duplication has not been
started yet at this stage.
REC
D u p li c a t e
L
DUPLCT
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
ALL SYNC
REC
1π 1
ALL SYNC
0 0 0
–6 –2
L
dB
R
DUPLCT
DIG
TOC
CD
–30 –10
0
45
Download from Www.Somanuals.com. All Manuals Search And Download.
DUPLICATING A CD
Note
Memo
New recordings cannot be added to a CD-R or CD-RW disc on
which some tracks have been previously recorded.
The OPC (Optimum Power Control) feature may start
automatically depending on disc conditions. In this case, the
message “OPC Adjust” appears on the display until the
adjustment is done (about 10 seconds) before the copy process
starts.
REC
R e c o r d i n g
1%
–2
L
dB
R
DUPLCT
AUTO
SYNC
DIGM
–30 –10
–6
0
CDR
CD TEXT
The copying conditions are as follows:
• Copy Method: “Digital Move”
If a CD to be duplicated has CD TEXT that can be copied, CD
TEXT will be automatically copied at duplication.
• Copy Level:
• Copy Speed:
0dB
“Best Effort”
■ Duplicating with high quality sounds (Audio Master Quality Recording)
You can duplicate a CD with high quality sound with the Audio Master Quality Recording feature.
Notes
• Audio Master Quality Recording can be used only for duplicating on a new CD-R disc.
OPEN/CLOSE
• Recordable time is 63 minutes for a 74-minute CD-R disc, and 68 minutes for an 79-minute CD-R disc.
COPY
A. M. Q. R. TIMER REC
REC
A.M.Q.R.
FINALIZE ERASE
INPUT
MULTI JOG
PUSH ENTER
NATURAL SOUND HDD/CD RECORDER
REPEAT RANDOM INTRO TEXT/TIME
TEXT/TIME
MODE
MENU
CLEAR
POWER
TRACK NO. COMPLETE
BOOKMARK
ABC
DEF
GHI
1
2
3
DIGITAL REC LEVEL
HDD
CDR
COPY
JKL
MNO
PQR
PHONES
LEVEL
ANALOG REC LEVEL
INPUT
4
5
6
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
STU
VWX
YZ
MIN
MAX
MIN
MAX
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
0
A.M.Q.R.
MODE
1. Press A.M.Q.R. while the unit is in the duplicate
Notes
• When total time of the CD to be duplicated exceeds
recordable time on a CD-R disc (63 minutes for a 74-minute
CD-R disc and 68 minutes for an 79-minute CD-R disc), the
following message appears on the display. In this case, Audio
Master Quality Recording cannot be used.
standby mode (P.45).
The A.M.Q.R. indicator lights up on the display.
DUPLCTA.M.Q.R.
2. Carry out steps 3 and 4 in “DUPLICATING A CD”
(P.45) to duplicate a CD (copy from a CD to the HDD
and copy from the HDD to a new CD-R or CD-RW
disc).
REC
N o E n o u g h S p c
L
DUPLCTA.M.Q.R.
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
ALL SYNC
• When a CD-R disc other than a 74-minute, 79-minute or 4x
writing compatible CD-R disc is loaded, or a CD-RW disc is
loaded on this unit, the following message appears on the
display. In this case, Audio Master Quality Recording cannot
be used.
REC
A M Q R
1%
–2
L
dB
R
DUPLCTA.M.Q.R.AUTO
SYNC
DIGM
–30 –10
–6
0
CDR
The copying conditions are as follows:
• Copy Method: “Digital Move”
REC
U n a v a i la b le
L
DUPLCTA.M.Q.R.
DIG
TOC
CD
dB
R
–30 –10
–6
–2
0
• Copy Level:
• Copy Speed:
0dB
ALL SYNC
Best Effort
• Once copying starts, no button operation is effective until
copying is completed.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
FINALIZING A CD-R/CD-RW DISC
Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player or a CD-RW disc to be
played on a CD-RW-compatible player.
ENTER
COMPLETE
CLEAR
OPEN/CLOSE
COPY
A. M. Q. R. TIMER REC
REC
TRACK NO.
WRITE
MULTI JOG
PUSH ENTER
ER
HDD
FINALIZE ERASE
INPUT
TEXT/TIME
MODE
MENU
CLEAR
FINALIZE
TRACK NO. COMPLETE
BOOKMARK
REPEAT RANDOM INTRO TEXT/TIME
CDR
DIGITAL REC LEVEL
ABC
DEF
GHI
COPY
1
2
3
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
JKL
MNO
PQR
4
MIN
MAX
4
5
6
W/D
STU
VWX
YZ
GROUP SKIP
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
FINALIZE w/d
0
MODE
1. Set a not-finalized CD-R or CD-RW disc in the disc
Notes
tray.
• Further recording is not possible onto a finalized CD-R disc.
Make sure that all recordings have been completed before
finalization.
2. Press FINALIZE.
The confirmation message appears on the display.
To cancel finalization, press a.
• Make sure a CD-R or CD-RW disc has no scratches, dust,
fingerprints or similar marks before loading. Wipe a CD-R or
CD-RW disc if there is any dust on it.
F i n a li z e O K ?
• Once the finalization process has started, no other operation
is possible until finalization is completed.
L
dB
R
–30 –10
–6
–2
0
CDR
• Never turn off the power or disconnect the power cord during
finalization.
3. Press w/d to start finalization.
REC
F i n a li z i n g
CDR
The level meter shows the finalization progress on the display.
CDR
When starting finalization
CDR
During finalization
When finalization is completed, the TOC indicator lights and
the unit enters the stop mode.
TOC
CDR
47
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASING DATA ON A CD-RW DISC
You can erase the data recorded on a CD-RW disc. New recordings can be made in the space created by erasing. The following four types of
erasing are possible with this unit.
ENTER
COMPLETE
CLEAR
OPEN/CLOSE
COPY
A. M. Q. R. TIMER REC
REC
TRACK NO.
WRITE
MULTI JOG
PUSH ENTER
ER
HDD
FINALIZE ERASE
INPUT
TEXT/TIME
MODE
MENU
CLEAR
ERASE
TRACK NO. COMPLETE
BOOKMARK
REPEAT RANDOM INTRO TEXT/TIME
CDR
DIGITAL REC LEVEL
ABC
DEF
GHI
COPY
1
2
3
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
JKL
MNO
PQR
A.M.Q.R.
MIN
MAX
4
5
6
W/D
STU
VWX
YZ
GROUP SKIP
7
8
9
SPACE
SYMBOL
10
BOOKMARK
MENU
ERASE w/d
0
MODE
■ Erasing last tracks
■ Erasing all tracks
This operation erases the last track on a disc. “Last Track Erase”
cannot be performed if a CD-RW disc has been finalized, or only
one track has been recorded on the disc.
This operation erases all tracks recorded on a CD-RW disc. TOC
will be erased also if a CD-RW disc has been finalized.
1. Set a CD-RW disc in the disc tray, then press ERASE
repeatedly until “Erase ALL ?” appears on the
display.
1. Set a not-finalized CD-RW disc in the disc tray, then
press ERASE.
“Erase Last ?” appears on the display.
E r a s e A L L ?
L
dB
R
–30 –10
–6
–2
0
CDRW
E r a s e L a s t ?
TRACK
CDRW
L
dB
R
–30 –10
–6
–2
0
To cancel erasing, press a.
Go to the next step when erasing only the last track. To erase
two or more tracks, rotate the MULTI JOG knob (press +/–, H
or G on the remote control) to specify the track number (to start
erasing from).
2. Press w/d to start erasing.
“Erasing” flashes on the display, and the level meter shows the
erasing progress.
■ Erasing TOC
E r a s e
2 - 9 ?
TRACK
CDRW
L
dB
R
–30 –10
–6
–2
0
This operation erases TOC (Table of Contents) data from a finalized
CD-RW disc. After erasing TOC data, you can record another track
data onto the CD-RW disc.
Track to start erasing from
Last track
To cancel erasing, press a.
1. Set a finalized CD-RW disc in the disc tray, then
2. Press w/d to start erasing.
press ERASE.
“Erasing” flashes on the display, and the level meter shows the
erasing progress.
“Erase TOC ?” appears on the display.
E r a s e T O C ?
L
TOC
dB
R
–30 –10
–6
–2
0
CDRW
To cancel erasing, press a.
2. Press w/d to start erasing.
“Erasing” flashes on the display, and the level meter shows the
erasing progress.
Memo
The TOC indicator turns off when “TOC Erase” has been com-
pleted.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASING DATA ON A CD-RW DISC
■ Initializing a CD-RW disc
This operation initializes a CD-RW disc.
1. Set a CD-RW disc in the disc tray, then press and
hold ERASE for about two seconds.
“Erase Disc ?” appears on the display.
E r a s e D i s c ?
L
dB
R
–30 –10
–6
–2
0
CDRW
To cancel erasing, press a.
4
2. Press w/d to start erasing.
“Erasing” flashes on the display, and the level meter shows the
erasing progress (the process takes about 20 minutes).
Notes
• “Erase Last” and “Erase TOC” cannot be applied to a CD-RW
disc recorded with “Full Auto” (P.42) (except for adding track
data to a disc without finalization) or a CD-RW disc recorded
with duplication.
• Never turn off the power of this unit during erasing.
• If “Check Disc” appears on the display during erasing, and
erasing stops, there may be dust or damage on the CD-RW disc.
Check the CD-RW disc and start the erasing operation again.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF EDIT MENU
In the edit menu, you can edit album, track, and disc data stored in the HDD. Please select the menu listed below for any purpose. Also, the
Undo feature enables to cancel the last edit operation.
Selectable during
Edit menu
Album New
Menu content
Page
playback*
To create a new album
✕
✕
✕
✕
52
53
54
54
55
55
55
56
56
57
58
59
60
60
62
62
63
64
64
65
67
67
68
68
69
69
70
Edit Stored
To edit an already created album
To copy other group as an album
Album Copy
Album Rename To change the album number
Album Delete
Album Pack
Album Title
Track Shuffle
Track Level
Tr. Interval
To delete an album
s
✕
Album Edit
To eliminate unused album numbers
To assign an album title
s
s
s
s
s
s
s
s
s
To change the order of tracks in an album
To adjust the track level in an album
To adjust each track interval in an album
To change a track number
Track Rename
Track Adjust
Track Erase
Part Erase
To adjust the beginning of a track
To erase a track
To erase the part of a track
Track Combine To combine a series of tracks
Track Edit
Track Divide
Track Pack
Add Fade In
Add Fade Out
Track Title
Disc Rename
Disc Erase
To divide one track into two
To eliminate unused track numbers
To add fade-in to the beginning of a track
To add fade-out to the end of a track
To assign a track title
s
✕
s
s
s
s
s
s
To change a disc number
To erase a disc
Disc Combine
Disc Divide
Disc Pack
To combine a series of discs
To divide one disc into two
To eliminate unused disc numbers
To assign a disc title
Disc Edit
Undo
s
✕
Disc Title
s
✕
To cancel the editing operation
*A menu with ✕ mark is not available during playback. A menu with mark is available in any case. However, if you carry out an edit
s
operation during playback, you cannot select an item (album, disc, or track) other than one currently played back.
■ Cursor button operations in the edit menu
In the edit menu, you can also use the cursor buttons although cursor button operations are not explained in each procedure (P.52-69). It
makes edit operations easier.
ENTER
H, G: Selects items or parameters.
Q
,
W: Moves the insertion point.
ENTER : Confirms items or parameters selected by pressing +/–, H or G.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF EDIT MENU
■ Entering characters in the edit
menu
Entering the title characters by using the
MULTI JOG knob
1. Rotate the MULTI JOG knob.
When the MULTI JOG knob is rotated clockwise, characters
appear in the order of alphabetical capital letters, alphabetical
lower case letters, numbers, and symbols.
2. Press the MULTI JOG knob to confirm the selected
character.
5
The cursor moves to the next space. Repeat steps 1 and 2 until
the title is complete. A title can contain up to 32 characters.
Entering the title characters by using the
alphabetical/numeric buttons on the remote
control
1. Select the character to be used for the title by using
the alphabetical/numeric buttons on the remote
control.
Alphabetical capital letters, alphabetical lower case letters, and
numbers switch each time the buttons are pressed. To insert a
space, press SPACE. To use a symbol, press SYMBOL to select
the desired symbol.
2. Select the next character by pressing one of the
alphabetical/numeric buttons.
The cursor automatically moves to the next space. When you
need to use the button same to step 1, press Y to move the
insertion point, then press the alphabetical/numeric button.
Correcting the characters
Move the cursor to the character to be corrected by pressing
t/e or r/y (T or Y on the remote control). To clear the
selected character, press CLEAR. To insert a character before the
selected character, use the MULTI JOG knob or alphabetical/
numeric buttons to select the character.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING ALBUMS
You can select the desired tracks from among the ones recorded on the HDD and store them as an album in this unit’s memory. You can also
edit the album afterwards.
10
MODE
MENU
MENU
COMPLETE MULTI JOG
MENU
ENTER
Cursor buttons, ENTER
CLEAR
MULTI JOG
RAL SOUND HDD/CD RECORDER
PUSH ENTER
TEXT/TIME
MODE
MENU
COMPLETE
CLEAR
COMPLETE
+, –
TRACK NO. COMPLETE
BOOKMARK
CLEAR
TRACK NO.
WRITE
DIGITAL REC LEVEL
HDD
HDD
CDR
COPY
L
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
CDR
MAX
MIN
MAX
t/e, r/y
CLEAR
T, Y
1. Press MENU while the HDD is selected (P.14).
Album New
You can create a new album by selecting the desired tracks from
among the ones recorded on the HDD.
The display changes for the menu item selection.
A lb u m E d i t
L
1. If “Album New” is selected (at left), the following
dB
R
–30 –10
–6
–2
0
screen appears.
Source disc Source track
2. Press MULTI JOG knob (ENTER on the remote
control).
D 0 0 1 1
≥
1
0
The display changes for the editing the menu item selection.
L
GROUP
dB
R
–30 –10
–6
–2
3. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select a menu item, then press
MULTI JOG knob (ENTER on the remote control) to
confirm the selection.
Track in the album to be created
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the source disc.
The followings are the album editing menu items.
• Album New* (at right)
• Edit Stored* (P.53)
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the source disc.
The number of the source track flashes.
• Album Copy* (P.54)
• Album Rename* (P.54)
• Album Delete (P.55)
• Album Pack* (P.55)
Press CLEAR to cancel the confirmed selection.
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the source track.
• Album Title (P.55)
5. Press the MULTI JOG knob (ENTER on the remote
• Track Shuffle (P.56)
control) to confirm the source track.
• Track Level (P.56)
The track number of the album being created will be advanced
to the next, and the display returns to the one shown in step 1.
Repeat steps 2 to 5 to select other discs and tracks.
• Tr. Interval (P.57)
An asterisk (*) next to a menu item indicates that the menu
cannot be selected during playback.
Press CLEAR to cancel the confirmed selection.
Memo
6. Press COMPLETE.
• If MENU is pressed during editing, entry of the selection is
canceled, and then this unit returns to the following state;
– This unit returns to the editing menu item selection if having
started editing during the stop mode.
A new album is created with the selected tracks recorded on it.
This unit returns to the editing menu item selection.
– This unit returns to the playback if having started editing during
the playback.
• If a is pressed during editing, all entry of the selection is
canceled, and this unit returns to the stop mode.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING ALBUMS
6. Press the MULTI JOG knob (ENTER on the remote
Memo
control) to confirm the disc.
• You can switch the display by pressing TEXT/TIME (P.18) while
an album is being made:
Press CLEAR to cancel the confirmed selection.
– If the title is assigned to the source disc or track, the title
appears.
7. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the track to be added in the album.
– By pressing TEXT/TIME while the title is being displayed, the
total time of the album being made appears for approximately
one second, and the display returns to the one in step 1.
– If no title is assigned to the source disc or track, the total time of
the album being made appears for approximately one second,
and the display returns to the one in step 1.
8. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
When continuing to add tracks to the album, repeat steps 4 to 8.
9. Press COMPLETE.
• You can create a new album from the bookmark list (P.24). For
details, refer to “Album Copy” (P.54).
The selected tracks are added to the album.
This unit returns to the editing menu item selection.
Edit Stored
You can add tracks to or delete tracks from an already created
album.
(When deleting tracks)
5
4. Press t/e or r/y (T or Y on the remote
control) to select the track number to be deleted.
1. If “Edit Stored” is selected (P.52), the following
screen appears.
D 0 0 4 2
≥
11
L
GROUP
dB
R
–30 –10
–6
–2
0
E d i t
0 0 1
?
0
L
GROUP
Track number to be deleted
dB
R
–30 –10
–6
–2
5. Press CLEAR.
Album to be edited
Memo
2. Rotate the MULTI JOG knob (press +/– on the remote
The tracks following the deleted track will automatically be
down-numbered.
control) to select the album to be edited.
3. Press the MULTI JOG knob (ENTER on the remote
When continuing to delete tracks from the album, repeat steps
4 and 5.
control) to confirm the album to be edited.
The following message appears on the display.
6. Press COMPLETE.
To add new tracks to the album, carry out steps 4 to 9 in “When
adding new tracks”. To delete tracks from the album, carry out
steps 4 to 6 in “When deleting tracks”.
The selected tracks are deleted from the album.
This unit returns to the editing menu item selection.
Disc number
Track number
D 0 0 1 1
≥
15
L
dB
R
GROUP
–30 –10
–6
–2
0
Track number in the album
(When adding new tracks)
4. Press t/e or r/y (T or Y on the remote
control) to select the track number to where a new
track will be added.
D 0 0 1 1
≥
13
L
GROUP
dB
R
–30 –10
–6
–2
0
Track number (destination)
5. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc where the original track is
stored.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING ALBUMS
Album Copy
Album Rename
You can copy the entire disc, album, or bookmark to a new album.
You can move the album and assign a new number.
1. If “Album Copy” is selected (P.52), the following
1. If “Album Rename” is selected (P.52), the following
screen appears.
screen appears.
C o p y
D 0 0 1?
R e n a m e
0 0 1?
–30 –10 –6 –2
L
L
dB
R
GROUP
GROUP
dB
R
–30 –10
–6
–2
0
0
Group to be copied from
Album to be moved
The number of the album to be moved flashes.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the group to be copied from.
2. Rotate the MULTI JOG knob (press +/– on the remote
The group to be copied from switches in the order of “disc” ➞
“album” ➞ “bookmark”.
control) to select the album to be moved.
3. Press the MULTI JOG knob (ENTER on the remote
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the album to be moved.
control) to confirm the group to be copied from.
The display scrolls to the left to indicate the number of the
album to be moved and the new album number.
The display scrolls to the left to indicate the number of the
group to be copied from and the number of the album to be
copied to. The album to be copied on is assigned the smallest
available number.
A 0 0 1
≥
0 0 2
L
GROUP
dB
R
–30 –10
–6
–2
0
D 0 0 1
≥
0 0 2
Album to be moved
New album number
L
GROUP
dB
R
–30 –10
–6
–2
0
Press CLEAR to cancel the confirmed selection.
Group to be copied from
Album to be copied to
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the new album number.
Press CLEAR to cancel the confirmed selection.
5. Press the MULTI JOG knob (ENTER on the remote
4. Press COMPLETE.
control) to confirm the new album number.
The selected group is copied to a new album.
This unit returns to the editing menu item selection.
Press CLEAR to cancel the confirmed selection.
6. Press COMPLETE.
The selected album has been moved and assigned a new
number.
This unit returns to the editing menu item selection.
Memo
• If the selected new album number is already in use, the albums
following this renumbered album will be automatically up-
numbered by one. However, if there is any unused album number,
only the albums up to that number will be up-numbered.
• The original number of the album that has been renumbered will
be available for future use.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING ALBUMS
Album Delete
Album Pack
You can delete an existing album.
You can re-organize the album numbers by eliminating unused
album numbers that have been created by changing album numbers
or deleting albums.
1. If “Album Delete” is selected (P.52), the following
screen appears.
1. If “Album Pack” is selected (P.52), the following
screen appears.
D e le t e
0 0 1?
–30 –10 –6 –2
L
dB
R
GROUP
0
P a c k ?
L
Album to be deleted
dB
R
–30 –10
–6
–2
0
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
2. Press COMPLETE.
The album numbers are re-organized without unused album
numbers.
2. Rotate the MULTI JOG knob (press +/– on the remote
This unit returns to the editing menu item selection.
control) to select the album to be deleted.
5
Before “Album Pack”
3. Press the MULTI JOG knob (ENTER on the remote
1
3
4
6
6
control) to confirm the album.
Press CLEAR to cancel the confirmed selection.
4. Press COMPLETE.
The selected album has been deleted.
This unit returns to the editing menu item selection.
1
2
3
4
5
After “Album Pack” (Unused albums are removed)
Memo
Album Title
You can assign a title to a created album.
The number of the deleted album will be available for future use.
1. If “Album Title” is selected (P.52), the following
screen appears.
T i t le
0 0 1?
–30 –10 –6 –2
L
dB
R
GROUP
0
Album to assign the title to
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the album to assign a title to.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the album to assign a title to.
L
dB
R
–30 –10
–6
–2
0
The cursor flashes. (If the selected album already has a title, the
title appears on the display.)
4. Use the MULTI JOG knob (press alphabetical/numeric
buttons on the remote control) to enter characters.
For details on selecting characters, refer to “Entering characters
in the edit menu” (P.51).
5. Press COMPLETE when all the characters have been
entered.
The title is assigned to the selected album. Press TEXT/TIME
to switch the display information as necessary (P.18).
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING ALBUMS
Track Shuffle
Track Level
You can change the order of tracks in an album.
You can adjust the sound level of track in an album.
1. If “Track Shuffle” is selected (P.52), the following
1. If “Track Level” is selected (P.52), the following
screen appears.
Track number
screen appears.
Track to adjust its level
S h u f f le 0 0 1 1?
L e v e l
0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
L
GROUP
dB
R
–30 –10
–6
–2
0
Album to change its tracks’ order
Album to adjust its tracks’ level
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
2. Rotate the MULTI JOG knob (press +/– on the remote
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the album to change its track’ order.
control) to select the album to adjust its tracks’ level.
3. Press the MULTI JOG knob (ENTER on the remote
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the album.
control) to confirm the album.
The number of the track to be moved flashes.
The number of the track to adjust its level flashes.
Press CLEAR to cancel the confirmed selection.
Press CLEAR to cancel the confirmed selection.
4. Rotate the MULTI JOG knob (+/– on the remote
4. Rotate the MULTI JOG knob (+/– on the remote
control) to select the track to be moved.
control) to select the track to adjust.
5. Press the MULTI JOG knob (ENTER on the remote
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
control) to confirm the track.
The display scrolls to the left to indicate the number of the
album to change its tracks’ order, the number of the track to be
moved, and the new track number.
Playback of the confirmed track starts, and the following
message appears on the display.
New track number
LEVEL
T r . 1
0 . 0 d B
L
dB
R
–30 –10
–6
–2
0
0 0 1 1
≥
2
–6
TRACK
L
dB
R
–30 –10
–2
0
Track to adjust its level
Press CLEAR to cancel the confirmed selection.
Album to change its Track to be moved
track’ order
6. Rotate the MULTI JOG knob (press +/– on the remote
Press CLEAR to cancel the confirmed selection.
control) to adjust the level.
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps.
6. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the new track number.
You can compare the level with the previous or next track’ level
by pressing t/e or r/y (T or Y on the remote
control).
7. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the new track number.
Press CLEAR to cancel the confirmed selection.
7. Press COMPLETE.
8. Press COMPLETE.
The level of the selected track is confirmed.
The selected track has been moved and assigned a new number.
This unit returns to the editing menu item selection.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING ALBUMS
Memo
Tr. Interval
• The level may change slightly out of the point that the track itself
changes during the playback of the album with its tracks’ level
adjusted. In this case, add the 1-to-2 second interval using the “Tr.
Interval” function (at right).
You can insert an interval at the beginning of the selected track of
an album.
1. If “Tr. Interval” is selected (P.52), the following screen
appears.
Track number
• You can not copy the album with its tracks’ level adjusted in the
Audio Master Quality Recording feature (P.41).
• You can also adjust the copy level (P.44) when copying the album
with its tracks’ level adjusted. The copy will be made in the total
level adjusted in “Track Level” and “Copy Level” in the copy
menu.
In t .
0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
Album to adjust its track interval
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
5
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the album to adjust its tracks
interval.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the album.
The number of the track to be adjusted flashes.
Press CLEAR to cancel the confirmed selection.
4. Rotate the MULTI JOG knob (+/– on the remote
control) to select the track to adjust its interval.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
The ending of the previous track for 5 seconds and the
beginning of the selected track for 5 seconds are repeatedly
played.
In t : 3 . 5
5 13
–6 –2
L
dB
R
–30 –10
0
TIME
Track interval
Playing time of the track
Press CLEAR to cancel the confirmed selection.
Memo
If there is no track before the track that is selected and
confirmed, “No Previous” appears on the display, and this unit
returns to step 4. (If the edit menu is selected during playback,
the unit cancels the edit operation.)
6. Rotate the MULTI JOG knob (press +/– on the remote
control) to adjust the interval.
Adjustment is possible in the 0 to 9.9 seconds range by 0.1-
second steps.
If you stop rotating the MULTI JOG knob, the ending of the
previous track for 5 seconds and the beginning of the selected
track for 5 seconds will be repeatedly played with the adjusted
interval.
7. Press COMPLETE.
The interval between the selected track and the previous track
is confirmed.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
You can do various editing operations on the tracks that have been recorded on the HDD.
10
MODE
MENU
MENU
COMPLETE MULTI JOG
MENU
ENTER
Cursor buttons, ENTER
CLEAR
MULTI JOG
RAL SOUND HDD/CD RECORDER
PUSH ENTER
TEXT/TIME
MODE
MENU
CLEAR
COMPLETE
CLEAR
COMPLETE
+, –
TRACK NO. COMPLETE
BOOKMARK
TRACK NO.
WRITE
DIGITAL REC LEVEL
HDD
CDR
COPY
HDD
L
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
CDR
MAX
MIN
MAX
E, R
T, Y
t/e, r/y
CLEAR
1. Press MENU while the HDD is selected (P.14).
Track Rename
You can move a track and assign a new number.
The display changes for the menu item selection.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
1. If “Track Rename” is selected (at left), the following
remote control) to select “Track Edit”
screen appears.
Disc that contains the track to be moved
T r a c k E d i t
L
dB
R
–30 –10
–6
–2
0
R e n a m e 0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
3. Press MULTI JOG knob (ENTER on the remote
control).
Track to be moved
The display changes for the editing menu item selection.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select a menu item, then press
MULTI JOG knob (ENTER on the remote control) to
confirm the selection.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be moved.
The followings are the track editing menu items:
• Track Rename (at right)
• Track Adjust (P.59)
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
• Track Erase (P.60)
The number of the track to be moved flashes.
• Part Erase (P.60)
• Track Combine (P.62)
Press CLEAR to cancel the confirmed selection.
• Track Divide (P.62)
4. Rotate the MULTI JOG knob (press +/– on the remote
• Track Pack* (P.63)
control) to select the track to be moved.
• Add Fade In (P.64)
5. Press the MULTI JOG knob (ENTER on the remote
• Add Fade Out (P.64)
control) to confirm the track.
• Track Title (P.65)
The display scrolls to the left to indicate the disc number that
contains the track to be moved, the existing track number, and
the new track number.
* “Track Pack” cannot be selected during playback.
Memo
Disc that contains the track to be moved
• If MENU is pressed during editing, entry of the selection is
canceled, and then this unit returns to the following state;
– This unit returns to the editing menu item selection if having
started editing during the stop mode.
0 0 1 1
≥
1
–6
TRACK
L
dB
R
–30 –10
–2
0
– This unit returns to the playback if having started editing during
playback.
Current track number
New track number
• If a is pressed during editing, all entry of the selection is
canceled, and this unit returns to the stop mode.
Press CLEAR to cancel the confirmed selection.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
6. Rotate the MULTI JOG knob (press +/– on the remote
Memo
control) to select the new track number.
If there is no track before the track that is selected and
confirmed, “No Previous” appears on the display, and this unit
returns to step 4. (If the edit menu is selected during playback,
the unit cancels the edit operation.)
7. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the new track number.
Press CLEAR to cancel the confirmed selection.
6. Rotate the MULTI JOG knob (press +/– on the remote
8. Press COMPLETE.
control) to adjust the time length (displacement).
The selected track is renumbered.
The time length can be adjusted by “minute: second: frame”.
(Frame is the unit used for values smaller than 1 second. 75
frames make 1 second.) The unit to be set is flashing. Move the
flash to the unit to be adjusted by pressing t/e or r/y
(E or R on the remote control).
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Memo
• If the selected new track number is already in use, the tracks
following this renumbered track will be automatically up-
numbered by one. However, if there is any unused track number,
only the tracks up to that number will be up-numbered.
If you stop rotating the MULTI JOG knob, this unit searches
for the temporarily changed beginning point of the track
according to the time length setting made, and starts repeated
playback from the new beginning point to the end of the disc.
5
• The original number of the track that has been renumbered will be
available for future use.
Press CLEAR to cancel the adjustment.
7. Press COMPLETE.
Track Adjust
You can change the beginning of the track forward or backward.
The new track beginning point is set.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
1. If “Track Adjust” is selected (P.58), the following
screen appears.
Before “Track Adjust”
Disc that contains the track to be adjusted
1
2
A d j u s t 0 0 1 2 ?
L
GROUP
dB
R
–30 –10
–6
–2
0
1
2
Track to be adjusted
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
After “Track Adjust” (Track 2 is displaced forward)
Memo
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be adjusted.
• If the adjusted track includes a part that cannot be copied digitally
before adjusting, the adjusted track itself cannot be copied
digitally either.
• When the emphasis status of the track to be adjusted is different
from that of the previous track, the emphasis status of the track to
be adjusted takes precedence over the previous track.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
The number of the track to be adjusted flashes.
Press CLEAR to cancel the confirmed selection.
4. Select the track to be adjusted by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
The confirmed track will be played.
The following message appears in the display.
The time length to be adjusted
0 12
+ 0 10 0 0
TIME
Playing time of the track
59
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
Track Erase
Part Erase
You can erase a selected track.
You can erase part of a selected track.
1. If “Track Erase” is selected (P.58), the following
1. If “Part Erase” is selected (P.58), the following screen
screen appears.
appears.
Disc that contains the track to be erased
Disc that contains the track to be partially erased
E r a s e
0 0 1 1?
P r t . E r . 0 0 1 1?
L
GROUP
L
GROUP
dB
R
–30 –10
–6
–2
0
dB
R
–30 –10
–6
–2
0
Track to be erased
Track to be partially erased
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be erased.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be partially erased.
3. Press the MULTI JOG knob (ENTER on the remote
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
control) to confirm the disc.
The number of the track to be erased flashes.
The number of the track to be partially erased flashes.
Press CLEAR to cancel the confirmed selection.
Press CLEAR to cancel the confirmed selection.
4. Rotate the MULTI JOG knob (press +/– on the remote
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the track to be erased.
control) to select the track to be partially erased.
5. Press the MULTI JOG knob (ENTER on the remote
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
control) to confirm the track.
The passage between the point that is 5 seconds before the
temporary beginning point of the partial erase and the
temporary beginning point (the point that is 10 seconds elapsed
from the beginning of the track) is repeatedly played.
Press CLEAR to cancel the confirmed selection.
To check the track to be erased, press w/d. This unit starts to
play the track to be erased repeatedly.
6. Press COMPLETE.
Beginning point (minute: second: frame)
The selected track is erased.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
0 0 5 A
0 10 0 0
TIME
Memo
Playing time of the track
The number of the track that has been erased will be available for
future use.
6. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the beginning point of the partial
erase.
The beginning point of the partial erase can be set by “minute:
second: frame”. The unit to be set is flashing. Move the flash to
the unit to be set by pressing t/e or r/y (E or R on
the remote control).
If you stop rotating the MULTI JOG knob, this unit searches
for the beginning point according to the setting made, and starts
repeated playback of the passage between the point that is 5
seconds before the beginning point and the beginning point.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
7. Press MULTI JOG knob (ENTER on the remote
control) to confirm the beginning point of the partial
erase.
To change the ending point, press CLEAR once to return to
step 8.
To change the beginning point, press CLEAR twice to return to
step 6.
The passage between the temporary ending point of the partial
erase (the point that is 10 seconds after the beginning point)
and the point that is 5 seconds after the temporary ending point
is repeatedly played.
10.Press COMPLETE.
The selected part is erased.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Ending point of the partial erase
0 2 0 B
0 2 0 0 0
TIME
Playing time of the track
Press CLEAR to cancel the confirmed selection.
8. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the ending point of the partial
erase.
5
The ending point of the partial erase can be set by “minute:
second: frame”. The unit to be set is flashing. Move the flash to
the unit to be set by pressing t /e or r/y (E or R
on the remote control).
If you stop rotating the MULTI JOG knob, this unit searches
for the ending point according to the setting made, and starts
repeated playback of the passage between the ending point and
the point that is 5 seconds after the ending point.
9. Press MULTI JOG knob (ENTER on the remote
control) to confirm the ending point of the partial
erase.
The passage between the point that is 5 seconds before the
beginning point and the point that is 5 seconds after the ending
point of the partial erase is repeatedly played.
The following message appears on the display.
P r t . E r .
P t . F i x
0 0 5
–6 –2
L
dB
R
–30 –10
0
0 0 6
L
dB
R
–30 –10
–6
–2
0
Notes
• The sound may be interrupted at the joint but it will be played
properly after the partial erase is completed.
• The minimum length of a track is four seconds. It is not
possible to create a track shorter than four seconds by erasing
partially.
Track
1
2
Track
3
: Part to be erased
1 Repeated passage when setting the beginning point
2 Repeated passage when setting the ending point
3 Repeated passage after confirming the ending point
61
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
Memo
Track Combine
• When combining a series of tracks, the selected track numbers
following the selected first track will be available for future use.
You can combine a series of tracks into one.
1. If “Track Combine” is selected (P.58), the following
• The track title for the first track is effective for the combined
track.
screen appears.
Disc that contains the first track to be combined
• If there is any track that cannot be copied digitally among the
tracks to be combined, the combined track cannot be copied
digitally either.
C o m b .
0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
• When tracks with different emphasis status have been combined,
the emphasis status of the first track becomes effective for the
combined track.
Track to be the first in the combination
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
Track Divide
You can divide a track into two at the selected point.
1. If “Track Divide” is selected (P.58), the following
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the first track
for the combination.
screen appears.
Disc that contains the track to be divided
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
D i v i d e 0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
The number of the track to be the first in the combination
flashes.
Track to be divided
Press CLEAR to cancel the confirmed selection.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the first track for the combination.
5. Press the MULTI JOG knob (ENTER on the remote
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be divided.
control) to confirm the track.
The display scrolls to the left to indicate the disc number that
contains the first track to be combined, the track number to be
the first in the combination, and the track number to be the last
in the combination.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
The number of the track to be divided flashes.
Disc that contains the first track for the combination
Press CLEAR to cancel the confirmed selection.
0 0 1 1
-
2
–6
TRACK
L
dB
R
4. Rotate the MULTI JOG knob (press +/– on the remote
–30 –10
–2
0
control) to select the track to be divided.
First track for the
combination
Second track for the
combination
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
Press CLEAR to cancel the confirmed selection.
The passage between the temporary dividing point (the point
that is 10 seconds elapsed from the beginning of the track) and
the point that is 5 seconds after the temporary dividing point is
repeatedly played.
6. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the second track for the
combination.
Dividing point
7. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
0 12
+ 0 10 0 0
TIME
Press CLEAR to cancel the confirmed selection.
8. Press COMPLETE.
Playing time of the track
The two selected tracks and all those between are combined
into one track.
This unit returns to the editing menu item selection.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
6. Rotate the MULTI JOG knob (press +/– on the remote
Track Pack
control) to specify the dividing point.
You can re-organize the track numbers by eliminating unused track
numbers, that have been created by changing track numbers or
erasing tracks.
The dividing point can be set by “minute: second: frame”. The
unit to be set is flashing. Move the flash to the unit to be set by
pressing t/e or r/y (E or R on the remote control).
1. If “Track Pack” is selected (P.58), the following
If you stop rotating the MULTI JOG knob, this unit searches
for the dividing point according to the setting made, and starts
repeated playback of the passage between the dividing point
and the point that is 5 seconds after the dividing point.
screen appears.
P a c k
0 0 1
?
0
L
dB
R
–30 –10
–6
–2
Dividing point
Track
Disc to be organized
Passage to be repeatedly played
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc to be organized.
7. Press COMPLETE.
5
3. Press the MULTI JOG knob (ENTER on the remote
The selected track is divided into two at the set dividing point.
control) to confirm the disc.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Press CLEAR to cancel the confirmed selection.
Notes
4. Press COMPLETE.
• The minimum length of a track is four seconds. It is not possible
to create a track that is shorter than four seconds by dividing a
track.
The disc is re-organized by eliminating unused track numbers.
This unit returns to the editing menu item selection.
Before “Track Pack”
• One disc can contain up to 99 tracks. If the disc already contains
99 tracks, “Track No.Full” appears on the display.
1
3
4
6
Memo
The track numbers following the divided track will be up-numbered
by one. However, if there is any unused track number, only the
tracks up to that number will be up-numbered.
1
2
3
4
5
6
After “Track Pack” (Unused track numbers have been eliminated.)
Before “Track Divide”
1
2
4
5
5
6
6
Divided into two
1
2
3
4
After “Track Divide” (When Track 1 is divided)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
Memo
Add Fade In
• Fade-in cannot be added to a track that is shorter than 21 seconds.
You can add fade-in at the beginning of a track. The beginning of
the track is played with gradually rising level when fade-in has
been added.
• The fade-in effect becomes ineffective if the following editing is
performed to the track which the fade-in is added to.
– Erasing a certain part of the track (Part Erase).
– Combining the track (Track Combine).
1. If “Add Fade In” is selected (P.58), the following
screen appears.
– Dividing the track (Track Divide).
Disc that contains the track to add fade-in
– Adjusting the beginning of the track (Track Adjust).
• If “Track Adjust” has been performed, the fade-in effect of both
the adjusted track and the previous track becomes ineffective.
F d . In
0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
Add Fade Out
You can add fade-out at the end of a track. The end of the track is
played with gradually lowering the level when fade-out has been
added.
Track to add fade-in
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
1. If “Add Fade Out” is selected (P.58), the following
screen appears.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
add fade-in.
Disc that contains the track to add fade-out
F d . O u t 0 0 1 1?
3. Press the MULTI JOG knob (ENTER on the remote
L
GROUP
dB
R
–30 –10
–6
–2
0
control) to confirm the disc.
The number of the track to add fade-in flashes.
Track to add fade-out
Press CLEAR to cancel the confirmed selection.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the track to add fade-in.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
add fade-out.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
The beginning of the track for eight seconds is repeatedly
played with a three second (initial setting) fade-in.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
Fade-in length
The number of the track to add fade-out flashes.
F . In
3
0 0 1
–30 –10 –6 –2
Press CLEAR to cancel the confirmed selection.
L
dB
R
0
TIME
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the track to add fade-out.
Playing time of the track
5. Press the MULTI JOG knob (ENTER on the remote
6. Rotate MULTI JOG knob (+/– on the remote control)
control) to confirm the track.
to set the fade-in length.
The ending of the track for eight seconds is repeatedly played
with a three second (initial setting) fade-out.
The fade-in length can be set in the 1 to 10 second range by
one second steps.
Fade-out length
If you stop rotating the MULTI JOG knob, this unit starts
repeated playback of the beginning of the track with a fade-in
of the length set in above step, with extra portion for further
five seconds.
F . O u t 3
10 0 1
–30 –10 –6 –2
L
dB
R
0
TIME
Press CLEAR to cancel the setting.
Playing time of the track
7. Press COMPLETE.
The fade-in is added to the beginning of the selected track for
the selected length.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
64
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING TRACKS
6. Rotate MULTI JOG knob (+/– on the remote control)
Track Title
You can assign a title to a track.
to set the fade-out length.
The fade-out length can be set in the 1 to 10 second range by 1-
second steps.
1. If “Track Title” is selected (P.58), the following screen
appears.
If you stop rotating the MULTI JOG knob, this unit starts
repeated playback of the ending of the track with a fade-out of
the length set in above step, with extra portion for further 5
seconds.
Disc that contains the track to assign a title to
T i t le
0 0 1 1?
L
GROUP
dB
R
–30 –10
–6
–2
0
Press CLEAR to cancel the setting.
7. Press COMPLETE.
Track to assign a title to
The fade-out is added to the end of the selected track for the
selected length.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
5
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
assign a title.
Memo
• Fade-out cannot be added to a track that is shorter than 21
seconds.
3. Press the MULTI JOG knob (ENTER on the remote
• The fade-out effect becomes ineffective if the following editing is
performed to the track which the fade-out is added to.
– Erasing a certain part of the track (Part Erase).
– Combining the track (Track Combine).
control) to confirm the disc.
When the disc has been confirmed, the disc number that
contains the track to assign a title to flashes.
– Dividing the track (Track Divide).
Press CLEAR to cancel the confirmed selection.
– Adjusting the beginning of the track (Track Adjust).
4. Rotate the MULTI JOG knob (press +/– on the remote
• If “Track Adjust” has been performed, the fade-out effect of both
the adjusted track and the previous track becomes ineffective.
control) to select the track to assign a title.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
The following message appears on the display.
L
dB
R
–30 –10
–6
–2
0
The cursor flashes. (If the selected track already has a title, the
title appears on the display.)
6. Use the MULTI JOG knob (press alphabetical/numeric
buttons on the remote control) to enter characters.
For details on selecting characters, refer to “Entering characters
in the edit menu” (P.51).
7. Press COMPLETE when all the characters have been
entered.
The title is assigned to the selected track. Press TEXT/TIME to
switch the display information as necessary (P.18).
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
You can do various editing operations on the discs that have been recorded on the HDD.
10
COMPLETE MULTI JOG
MENU
MODE
MENU
MENU
MULTI JOG
RAL SOUND HDD/CD RECORDER
PUSH ENTER
TEXT/TIME
MODE
MENU
CLEAR
ENTER
Cursor buttons, ENTER
CLEAR
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
COMPLETE
CLEAR
HDD
CDR
COPY
COMPLETE
+, –
L
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
TRACK NO.
WRITE
A.M.Q.R.
MAX
MIN
MAX
HDD
CDR
CLEAR
1. Press MENU while the HDD is selected (P.14).
Memo
The display changes for the menu item selection.
• If MENU is pressed during editing, entry of the selection is
canceled, and then this unit returns to the following state;
– This unit returns to the editing menu item selection if having
started editing during the stop mode.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Disc Edit”.
– This unit returns to the playback of the disc to be edited if
having started editing during playback.
D i s c E d i t
L
dB
R
–30 –10
–6
–2
0
• If a is pressed during editing, all entry of the selection is
canceled, and this unit returns to the stop mode.
3. Press MULTI JOG knob (ENTER on the remote
control).
The display changes for the editing menu item selection.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select a menu item, then press
MULTI JOG knob (ENTER on the remote control) to
confirm the selection.
The followings are the disc editing menu items:
• Disc Rename (P.67)
• Disc Erase (P.67)
• Disc Combine (P.68)
• Disc Divide (P.68)
• Disc Pack* (P.69)
• Disc Title (P.69)
* “Disc Pack” cannot be selected during playback.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Disc Rename
Disc Erase
You can move a disc and assign a new number.
You can erase a selected disc.
1. If “Disc Rename” is selected (P.66), the following
1. If “Disc Erase” is selected (P.66), the following screen
screen appears.
appears.
R e n a m e
0 0 1?
–30 –10 –6 –2
E r a s e
0 0 1?
–30 –10 –6 –2
L
dB
R
L
dB
R
GROUP
GROUP
0
0
Disc to be moved
Disc to be erased
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
2. Rotate the MULTI JOG knob (press +/– on the remote
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc to be moved.
control) to select the disc to be erased.
5
3. Press the MULTI JOG knob (ENTER on the remote
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc to be moved.
control) to confirm the disc to be erased.
The display scrolls to the left to indicate the disc number to be
moved and new number.
Press CLEAR to cancel the confirmed selection.
4. Press COMPLETE.
D 0 0 2
≥
0 0 3
The selected disc is erased.
L
GROUP
dB
R
–30 –10
–6
–2
0
G
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Disc to be moved
New disc number
Memo
Press CLEAR to cancel the confirmed selection.
The number of the erased disc will be available for future use.
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the new disc number.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the new disc number.
Press CLEAR to cancel the confirmed selection.
6. Press COMPLETE.
The selected disc has been moved to and assigned a new
number.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Memo
• If the selected new disc number is already in use, the disc
numbers following this renumbered disc will be automatically up-
numbered by one. However, if there is any unused disc number,
only the discs up to that number will be up-numbered.
• The original number of the disc that has been renumbered will be
available for future use.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Disc Combine
Disc Divide
You can combine a series of discs into one.
You can divide a disc into two at the selected point.
1. If “Disc Combine” is selected (P.66), the following
1. If “Disc Divide” is selected (P.66), the following
screen appears.
screen appears.
C o m b i n e
0 0 1?
D i v i d e
0 0 1?
–30 –10 –6 –2
L
dB
R
L
dB
R
GROUP
GROUP
–30 –10
–6
–2
0
0
Disc to be divided
Disc to be the first in the combination
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
2. Rotate the MULTI JOG knob (press +/– on the remote
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the first disc for the combination.
control) to select the disc to be divided.
3. Press the MULTI JOG knob (ENTER on the remote
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
control) to confirm the disc.
“Div. from” and the dividing point (the number of the track to
be the first after dividing) appear on the display.
The display scrolls to the left to indicate the disc numbers to be
the first and the last in the combination.
D i v . f r o m
4 ?
–2
TRACK
0 0 1
-
0 0 2
L
dB
R
–30 –10
–6
0
L
GROUP
dB
R
–30 –10
–6
–2
0
Track to be the first after dividing
Disc to be the first in the
combination
Disc to be the last in the
combination
Press CLEAR to cancel the confirmed selection.
Press CLEAR to cancel the confirmed selection.
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to specify the dividing point.
4. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the second disc for the
combination.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the dividing point.
5. Press the MULTI JOG knob (ENTER on the remote
Press CLEAR to cancel the confirmed selection.
control) to confirm the disc.
6. Press COMPLETE.
Press CLEAR to cancel the confirmed selection.
The selected disc is divided into two at the selected dividing
point.
6. Press COMPLETE.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
The two selected discs and all those between are combined into
one disc.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Note
The HDD can contain up to 999 discs. If the HDD already contains
999 discs, “Disc No.Full” appears on the display.
Notes
• One disc can contain up to 99 tracks. When the total track number
on a disc exceeds 99, “Track No.Full” appears on the display.
Memo
The disc numbers following the divided disc will be up-numbered
by one. However, if there is any unused disc number, only the discs
up to that number will be up-numbered.
• The maximum length of one disc on the HDD is 179 minutes 59
seconds. When the total time of the discs to be combined exceeds
179 minutes 59 seconds, “No Enough Spc” appears on the
display.
Before “Disc Divide”
1
2
4
5
5
6
6
Memo
• When combining a series of discs, the selected disc numbers
following the selected first disc will be available for future use.
Divided into two
• The disc title for the first disc is effective for the combined disc.
1
2
3
4
After “Disc Divide” (When Disc 1 is divided)
68
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Disc Pack
Disc Title
You can re-organize the disc numbers by eliminating unused disc
numbers that have been created by changing disc numbers or
erasing discs.
You can assign a title to a recorded disc.
1. If “Disc Title” is selected (P.66), the following screen
appears.
1. If “Disc Pack” is selected (P.66), the following screen
appears.
T i t le
0 0 1?
–30 –10 –6 –2
L
dB
R
GROUP
0
P a c k ?
L
dB
R
–30 –10
–6
–2
0
Disc to assign a title to
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 4 since you do not need to select an item.
2. Press COMPLETE.
The disc numbers are re-organized by eliminating unused disc
numbers.
2. Rotate the MULTI JOG knob (press +/– on the remote
This unit returns to the editing menu item selection.
control) to select the disc to assign a title.
5
3. Press the MULTI JOG knob (ENTER on the remote
Before “Disc Pack”
control) to confirm the disc to assign a title to.
1
3
4
6
L
dB
R
–30 –10
–6
–2
0
1
2
3
4
5
6
The cursor flashes. (If the selected disc already has a title, the
title appears on the display.)
After “Disc Pack” (Unused disc numbers have been eliminated.)
4. Use the MULTI JOG knob (press alphabetical/numeric
buttons on the remote control) to enter characters.
For details on selecting characters, refer to “Entering characters
in the edit menu” (P.51).
5. Press COMPLETE when all the characters have been
entered.
The title is assigned to the selected disc. Press TEXT/TIME to
switch the display information as necessary (P.18).
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
CANCELING EDIT OPERATIONS (UNDO)
You can cancel an operation and the result of a previous editing step on this unit (Undo function).
10
MODE
MENU
MULTI JOG
MENU
MENU
MULTI JOG
PUSH ENTER
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME
MODE
MENU
CLEAR
ENTER
ENTER
H, G
POWER
TRACK NO. COMPLETE
BOOKMARK
COMPLETE
CLEAR
DIGITAL REC LEVEL
COMPLETE
HDD
CDR
COPY
TRACK NO.
WRITE
PHONES
LEVEL
ANALOG REC LEVEL
INPUT
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
A.M.Q.R.
HDD
MIN
MAX
MIN
MAX
+, –
CDR
COMPLETE
1. Press MENU while this unit is in the stop mode.
Memo
• The undo function does not apply to “Track Level” or “Tr.
Interval” in the Album Edit menu and “Add Fade In” or “Add
Fade Out” in the Track Edit menu because it can be canceled at
any time.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Undo”.
U n d o
L
• The undo function does not apply to “Album Title”, “Track Title”,
or “Disc Title”.
dB
R
–30 –10
–6
–2
0
3. Press the MULTI JOG knob (ENTER on the remote
control) to display “Undo?”.
4. Press COMPLETE.
The previous editing operation and result are canceled.
The undo function does not work if any of the following
operations has been performed after the editing operation.
• After the editing operation, a recording has been made, or this
unit has been set in the recording pause mode to start
recording.
• After the editing operation, a copy has been made, or this unit
has been set in the copy standby mode to start copying.
• Further editing operations have been performed.
• The HDD has been formatted.
The following message appears on the display if the undo
function does not work.
N o U n d o d a t a
L
dB
R
–30 –10
–6
–2
0
70
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVERTING DIGITAL/ANALOG OUTPUT SIGNALS (DAC MODE)
This unit has the digital-analog converter (DAC) mode. When the DAC mode is turned on, the unit outputs audio sources (audio signals input
from the input jacks) from the both digital (OPTICAL and COAXIAL) and analog (ANALOG) jacks.
MODE
MENU
MENU
OPEN/CLOSE
ENTER
H, G
COMPLETE MULTI JOG MENU
COPY
A. M. Q. R. TIMER REC
REC
COMPLETE
CLEAR
ENTER
COMPLETE
MULTI JOG
PUSH ENTER
TEXT/TIME
MODE
MENU
FINALIZE ERASE
INPUT
TRACK NO.
WRITE
TRACK NO. COMPLETE
BOOKMARK
CLEAR
INPUT
REPEAT RANDOM INTRO TEXT/TIME
HDD
DIGITAL REC LEVEL
ABC
DEF
GHI
CDR
INPUT
ANALOG REC LEVEL
1
2
3
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
JKL
MNO
PQR
+, –
A
MIN
MAX
4
5
6
STU
VWX
YZ
7
8
9
W/D
INPUT
ANALOG
REC LEVEL
a
w/d
SPACE
SYMBOL
10
BOOKMARK
MENU
GROUP SKIP
0
MODE
6
1. Press MENU while this unit is in the stop mode.
4. Press INPUT to select the input sources (OPTICAL,
COAXIAL, or ANALOG).
The display changes for the menu item selection.
The lamp for the selected input lights up and the unit outputs
the input source from ANALOG LINE OUT and DIGITAL
OUT (OPTICAL/COAXIAL) jacks.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “DAC Mode”.
Memo
D A C M o d e
L
dB
R
–30 –10
–6
–2
0
• When OPTICAL or COAXIAL is selected, the MULTI JOG
knob functions as a volume control.
• When ANALOG is selected, the ANALOG REC LEVEL
control functions as a volume control.
3. Press the MULTI JOG knob (ENTER on the remote
control) to enter the DAC mode.
5. Any of the following operation cancel the DAC mode
and start normal operation.
• Press w/d to play the drive that had been selected before
entering the DAC mode.
• Press a or COMPLETE to set this unit in the stop mode.
• Press MENU to return to the menu item selection.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD UTILITY
■ Checking HDD information
■ Formatting the HDD (HDD Format)
(HDD Info.)
You can format the HDD in this unit.
Notes
You can check the HDD utility (capacity, usage, and available
space) of this unit.
• After the HDD has been formatted, all data about the recorded
tracks and settings will be erased from the HDD.
1. Press MENU while this unit is in the stop mode.
• After all data on the HDD have been initialized, the undo function
cannot be applied to any editing operations before formatting.
The display changes for the menu item selection.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
1. Carry out steps 1 to 3 in “Checking HDD information
remote control) to select “HDD Utility”.
(HDD Info.)” (at left).
The display changes for the HDD utility item selection.
H D D U t i li t y
L
dB
R
–30 –10
–6
–2
0
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “HDD Format”.
3. Press the MULTI JOG knob (ENTER on the remote
control) to display “HDD Info.”.
H D D F o r m a t
L
dB
R
–30 –10
–6
–2
0
H D D In f o .
L
dB
R
–30 –10
–6
–2
0
3. Press the MULTI JOG knob (ENTER on the remote
control) to display “Initialize ?”.
4. Press the MULTI JOG knob (ENTER on the remote
In i t i a li z e ?
control) again to display the capacity of the HDD.
L
dB
R
–30 –10
–6
–2
0
Rotating the MULTI JOG knob (pressing +/–, H or G on the
remote control) changes the display as follows. The disc
capacity is indicated by time (hour and minute).
4. Press the w/d to display “Format Really ?”.
Capacity (total time)
F o r m a t R e a lly
L
dB
R
–30 –10
–6
–2
0
T o t a l 2 5 0 h 4 m
L
dB
R
–30 –10
–6
–2
0
To format the HDD, press INPUT. If not, press a.
5. Press INPUT to display “Format OK” and restart the
unit.
Usage (total used time)
Note
U s e d
1h 7 m
L
You cannot apply “HDD Format” for a new HDD. To format a
new HDD after installation, refer to “HDD Installation
Manual”.
dB
R
–30 –10
–6
–2
0
Available space (recordable time)
A v a i l 2 4 8 h 5 6 m
L
dB
R
–30 –10
–6
–2
0
Memo
The times displayed are rough estimates.
5. Press a or MENU to exit.
The unit returns to the stop mode.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM UTILITY
■ Checking the firmware version
■ Initializing settings (Initialize)
(Firm. Version)
You can initialize the settings that have been changed. The OPC
data stored in this unit is also initialized.
Software that is called “firmware” is built into this unit. This
firmware controls the operation. The following steps describe the
firmware version check procedures.
1. Carry out steps 1 to 3 in “Checking the firmware
version (Firm. Version)” (at left).
The display changes for the system utility item selection.
1. Press MENU while this unit is in the stop mode.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
The display changes for the menu item selection.
remote control) to select “Initialize”.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Sys. Utility”.
In i t i a li z e
L
dB
R
–30 –10
–6
–2
0
S y s . U t i li t y
L
dB
R
–30 –10
–6
–2
0
3. Press the MULTI JOG knob (ENTER on the remote
control) to display “Initialize ?”.
3. Press the MULTI JOG knob (ENTER on the remote
control) to display “Firm. Version”.
In i t i a li z e ?
L
6
dB
R
–30 –10
–6
–2
0
F i r m . V e r s i o n
L
dB
R
–30 –10
–6
–2
0
Press a to cancel the initialization process.
4. Press COMPLETE.
4. Press the MULTI JOG knob (ENTER on the remote
The unit restarts with the initial settings.
control) again to display the version of the firmware.
Rotating the MULTI JOG knob (pressing +/–, H or G on the
remote control) changes the display as follows.
System firmware version
V 1. 0 . 0 0 J u n 2
L
dB
R
–30 –10
–6
–2
0
CDR drive firmware version
C D R W
7 . 0 6
L
dB
R
–30 –10
–6
–2
0
Model of HDD
A B C D E F G H IJ K L M
L
dB
R
–30 –10
–6
–2
0
5. Press a or MENU to exit.
The unit returns to the stop mode.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM UTILITY
■ Setting the display brightness
■ Setting the video output
(Dimmer Setup)
(VIDEO Output)
You can change the brightness of the display.
You can switch the on-screen display output through the VIDEO
OUT jacks on and off.
1. Carry out steps 1 to 3 in “Checking the firmware
version (Firm. Version)” (P.73).
1. Carry out steps 1 to 3 in “Checking the firmware
version (Firm. Version)” (P.73).
The display changes for the system utility item selection.
The display changes for the system utility item selection.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Dimmer Setup”.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “VIDEO Output”.
D i m m e r S e t u p
L
dB
R
–30 –10
–6
–2
0
V ID E O O u t p u t
L
dB
R
–30 –10
–6
–2
0
3. Press the MULTI JOG knob (ENTER on the remote
control) to display the current setting.
3. Press the MULTI JOG knob (ENTER on the remote
control) to display the current setting.
Rotating the MULTI JOG knob (pressing +/–, H or G on the
remote control) changes the setting as follows.
Rotating the MULTI JOG knob (pressing +/–, H or G on the
remote control) switches the setting between “VIDEO On” and
“VIDEO Off”.
D i m m e r B r i g h t
L
dB
R
–30 –10
–6
–2
0
Memo
Initial setting is “VIDEO On”.
4. Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
D i m m e r M i d
The on-screen display output is set to on or off.
L
dB
R
–30 –10
–6
–2
0
Memo
Select “VIDEO Off” if the on-screen display is not used so that you
can enjoy playback or recording with higher quality sounds.
D i m m e r D a r k
5. Press a or MENU to exit.
L
dB
R
–30 –10
–6
–2
0
The unit returns to the stop mode.
Memo
Initial setting is “Dimmer Bright”.
4. Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
The display brightness has been set.
5. Press a or MENU to exit.
The unit returns to the stop mode.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM UTILITY
■ Starting playback automatically
■ Updating the firmware version
(Auto Play)
(Firm. Update)
You can set the auto play function which automatically starts
playback when the power of this unit is turned on. Using an
external timer with this feature enables timer playback.
This menu is prepared for the expansion of the functions in the
future.
1. Carry out steps 1 to 3 in “Checking the firmware
version (Firm. Version)” (P.73).
The display changes for the system utility item selection.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Auto Play”.
A u t o P la y
L
dB
R
–30 –10
–6
–2
0
3. Press the MULTI JOG knob (ENTER on the remote
control) to display the current setting.
6
A u t o P la y O f f
L
dB
R
–30 –10
–6
–2
0
Rotating the MULTI JOG knob (pressing +/–, H or G on the
remote control) switches the setting between “Auto Play On”
and “Auto Play Off”.
Memo
Initial setting is “Auto Play Off”.
4. Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
The auto play function is set to on or off.
If the auto play function is set to on, the setting will be applied
when the power of this unit is turned on the next time.
• This unit plays data on the drive that had been last selected
when the power of this unit was last turned off.
• This unit plays in the playback mode (such as random play)
that had been last set when the power of this unit was last
turned off.
5. To carry out timer playback, connect the power cable
of this unit to an external timer, then set the timer.
Memo
The setting for the timer recording takes precedence over the setting
for the auto play function. If the timer recording (P.32) is set, this
unit starts recording when the power of this unit is turned on the
next time even when “Auto Play On” is selected.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If this unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures
suggested. If they cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your
authorized YAMAHA dealer or service center for assistance.
SYMPTOM
CAUSE
REMEDY
This unit does not turn on
when POWER is pressed.
The power cable is not completely connected. Securely connect the power cable (P.10).
Playback does not begin
with the CD loaded.
There is moisture on the laser pick-up.
Turn the power of this unit and wait 20 to 30 minutes
before trying to play (P.14).
The CD has been loaded upside down.
The CD is dirty.
Reload the CD with the label side facing up.
Clean the CD (P.v).
Playback is delayed, or
The CD may be scratched or damaged.
Check the CD carefully. Replace it if necessary.
begins at the wrong place.
Recording/copying is not
possible.
The CD-R or CD-RW disc has been finalized. Load a recordable CD that has not been finalized yet (P.iv).
The CD-R or CD-RW disc that has completed Load a recordable CD (P.iv).
recording is loaded.
INPUT is not correctly set.
Set INPUT to the correct position according to the input
signal (P.31).
Further digital recording or copying has been Switch to ANALOG to make a recording (P.31).
attempted from the digitally copied sources.
There is not enough available space left or 99 Load a recordable disc (for a CD-R or CD-RW disc) (P.iv).
tracks have already been recorded on the
disc.
Select the other discs (for the HDD) (P.16).
There is no available space on the HDD.
Erase the space not being used to create available space on
the HDD for further recording.
If the power cable was unplugged or there
was a power outage during recording, the
recorded material may be lost.
If the recording of a CD-RW disc is interrupted, try
recording again from the beginning. When the recording of
a CD-R disc is interrupted, start recording over again with
a disc that can be recorded on.
The CD-R or CD-RW disc is dirty or
damaged.
Clean or replace the CD-R or CD-RW disc (P.v).
Some vibration and rotation This unit copies by rotating the CD, CD-R or Lower the copying speed to decrease vibration and rotation
noise are created during the CD-RW disc at high speed.
copying.
noise.
Continuous recording
The maximum recordable time for a disc or
Regardless of the recording mode, the recording will be
cannot be made on a disc or track on the HDD is 179 minutes 59 seconds. performed continuously to the next available disc after the
track on the HDD beyond
180 minutes.
recording has been performed to one disc for its maximum
length.
The beginning of the track
is missing during the
playback when this unit is
connected digitally to an
amplifier.
The tracks that have different emphases have Connect to the amplifier using the ANALOG LINE OUT
been played.
(PLAY) jacks (P.10).
The sound is missing when
this unit switches one disc
to another.
The titles appear on the display during the
playback of the part that has been recorded
stretching over the two discs.
Press TEXT/TIME to switch the display to the indication
of time (P.18).
A CD-R or CD-RW that has Your CD or DVD player is not compatible
been recorded with this unit with CD-R or CD-RW discs.
Use a CD or DVD player compatible with CD-R or CD-
RW discs.
cannot be played on the
The CD-R or CD-RW disc has not been
Finalize the CD-R or CD-RW disc (P.47).
other CD player or DVD
finalized.
player.
Sound “skips”.
This unit and/or the component connected is
being subjected to vibration or impact.
Relocate the unit. (This is not possible if the skipping
sound is already on the recording due to vibrations or
impact that occurred during recording.)
The CD is dirty.
Clean the CD (P.v).
This unit makes noise.
Connection has not correctly been made.
Properly connect the audio pin cables. Replace the audio
cables (P.10).
76
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
REMEDY
SYMPTOM
CAUSE
This unit does not operate
properly.
The internal microcomputer has been frozen. Turn off the power of this unit and then turn on again after
about one minute (P.14).
There is rotation noise of
the fan.
The temperature inside this unit rises.
The fan starts to rotate to cool off the temperature inside
this unit.
A noise occurs at the
A very low frequency component among the
Improvement can be made by adding a short fade-in or
change of the tracks that
has been recorded from the
analog record and edited.
wow and flutter of the analog record is being fade-out to the track (P.64).
output as a noise.
Remote control does not
work.
The batteries of the remote control are too
weak.
Replace two batteries with new ones (P.11).
Remote control is from too far.
Remote control is being used at an incorrect
angle.
Use the remote control within 6 m and 60 degrees radius
(P.11).
Direct sunlight or lighting (of an inverter type Change the position so that the remote control sensor is not
of fluorescent lamp, etc.) is striking the
remote control sensor.
exposed to strong lighting.
TV does not correctly
function when the remote
control is being used.
Remote control is being used near TV set
with a remote control sensor.
Relocate this unit away from the TV or cover the TV’s
remote control sensor.
The picture on the TV is
impaired.
The indoor antenna is used.
Use an outdoor antenna, or set this unit away from the TV
set.
7
77
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY MESSAGES
Can’t Copy
Format Really
This message is displayed for approximately 3 seconds when digital
recording or copying is not possible according to the SCMS
standard.
This message confirms starting the format of the HDD after
“Initialize ?” appears.
HDD Full
Refer to “Rules of Digital Recording” (P.82).
This message is displayed when recording to the HDD cannot be
performed any further because the recording has been made up to
the total recordable time.
Can’t Edit
This message is displayed when a prohibited editing operation has
been attempted.
Initialize ?
Can’t Tr.Lev.
This message confirms starting the format of the HDD, or the
initialization of each item.
The album with its tracks’ level adjusted is to be copied to a CD-R
disc in the Audio Master Quality Recording mode.
Invalid Mode
Can’t use HDD
The recording mode that cannot be selected during the timer
recording setting has been selected.
The loaded HDD has been formatted by other CDR-HD1500s.
Reformat by the CDR-HD1500 on which you plan to use that HDD
(P.72).
New Disc
The disc in the disc tray is either a new CD-R or CD-RW disc, or a
CD-RW disc that has been erased by using a “Disc Erase” or “All
Erase”.
Change Discs!
This message informs that a CD needs to be changed to a disc to be
used for duplicating when copying from a CD onto the HDD has
been completed.
No Data
There are no tracks (data) recorded on the HDD.
Check Disc
No Disc
This unit fails to read the CD because the CD has been loaded on
the disc tray upside down or the CD has remarkable scratch on it, or
some kind of error has been occurred during operation. Check the
disc, and exchange the CD if necessary.
There are no CDs on the disc tray.
No Enough Spc
There is not enough space for copying, or the track number exceeds
the maximum number when copying.
Data Track
This message is displayed when the data track is being played.
No Input
There are no input signals when attempting the recording from the
external components digitally.
Disc Full
This message is displayed when recording to a CD-R or CD-RW
disc cannot be performed any further because the recording has
been made up to the total recordable time.
No Previous
When making “Tr. Interval” on the ALBUM EDITING menu or
“Track Adjust” on the TRACK EDITING menu, there is no track
before the track to be edited.
Disc No.Full
When the number of discs recorded on the HDD has reached its
maximum of 999 discs, this message is displayed if more discs have
been attempted to be added.
No Source
There is no source recorded on the HDD or CDs when copying.
Drive Check
Not Audio
Some kind of error has been occurred in the HDD or the CDR
drive. Contact the nearest authorized YAMAHA dealer or service
A non-audio CD-R or CD-RW disc, such as a CD-R or CD-RW disc
for PCs, has been loaded in the disc tray, and recording has been
attempted on that CD-R or CD-RW disc.
center. Or HDD is not set to “slave” precisely. Refer to the “HDD
Installation Manual” and set the HDD to “slave”.
No Undo data
Erasing
Undo is not possible.
Erasing a CD-RW disc is being performed. The erasing progress is
indicated by the level meter.
OPC Adjust
This message is displayed while OPC (Optimum Power
Calibration) optimized the laser power to the reflectivity of the disc.
Approximately 10 seconds may be required to complete this
automatic adjustment. However, this time length may change
according to the type of the disc that has been loaded.
Finalize OK?
This message confirms starting the finalization of a CD-R or CD-
RW disc. If you wish to finalize, press w/d.
Finalizing
Pack Before !
Finalization is being performed. The finalization progress is
indicated by the level meter.
This message is displayed when the editing operation cannot be
done unless “Pack” is performed.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY MESSAGES
Reading
This unit reads the format of the CD, CD-R, or CD-RW disc loaded
on the disc tray. Approximately 10 to 20 seconds may be required
to complete this automatic adjustment. However, this time length
may change according to the type of the CD, CD-R, or CD-RW disc
that has been loaded.
Standby
This message is displayed for several seconds after REC has been
pressed to record on a CD-R or CD-RW disc.
Timer Standby
This message is displayed after the timer recording setting has been
completed, or displayed for approximate five seconds before the
timer recording starts.
Track No.Full
One disc can contain up to 99 tracks. Recording is attempted on the
disc that has reached the maximum number.
Unavailable
The CD-R disc whose recordable time is other than 74 minutes or
79 minutes or the CD-R disc which does not support 4x writing, or
the CD-RW disc has been loaded when copying in the Audio
Master Quality Recording mode.
7
Unrecordable
In recording or copying onto a CD-R or CD-RW disc, the disc
cannot be used for recording or copying. Or in recording or copying
onto the HDD, no space is available.
Wait
This message flashes while this unit is writing information to the
PMA (Program Memory Area) after a is pressed in recording onto
a CD-R or CD-RW disc, or flashes while processing the data on the
HDD or detecting the loaded HDD when this unit is turned on.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
The following explains key terms used in this manual.
Album
Finalize
An album is a unit used while playing back or recording audio
signals on this unit. For detailed information, see “Data on the
HDD” (P.16).
Finalize is a process to enable audio data recorded onto CD-R/RW
discs to be played back on CD players or other CD-RW compatible
devices. An audio disc created on this unit must be finalized to be
played back on other playback devices.
Audio Master Quality Recording
Group
Audio Master Quality Recording is a high quality recording mode
used to create an audio CD with its original quality. By minimizing
the jitter that subtly degrades the audio quality or even causes data
transmission failure, Audio Master Quality Recording actualizes a
clear sound close to the original sound.
A group is a unit used while playing back or recording audio signals
on this unit and is a collective term for albums, discs and book-
marks. A group consists of several audio tracks. For detailed
information, see “Data on the HDD” (P.16) or “Data on CDs”
(P.17).
Bookmark
SCMS
A bookmark is a collection of audio tracks of your preference. You
can play back or record audio data using a bookmark, and an album
can be created from a bookmark. For detailed information, see
“Data on the HDD” (P.16) or “Data on CDs” (P.17).
SCMS (Serial Copy Management System) is a system developed by
JASRAC (Japanese Society for Rights of Authors, Composers and
Producers) to prevent unlimited digital copying of CD’s and other
prerecorded media. In essence, SCMS prevents more than one
generation of digital copying (i.e. a copy of an SCMS copy-
protected source cannot be duplicated).
CD TEXT
CD TEXT is text information (album title, track title, etc) recorded
on CDs and can be read only with a CD player or CD-ROM drive
that supports CD TEXT.
TOC
TOC (Table of Contents) is a disc index recorded on a finalized disc
and enables playback devices to distinguish audio tracks recorded
on the disc.
Digital Move
Digital move implies moving audio data recorded on the HDD onto
CD-R/RW discs. The audio data once digital moved onto CD-R/RW
discs are erased from the HDD. Because digital move is regarded as
one generation of digital copying, audio data can be digitally copied
from CDs onto the HDD and then from the HDD onto CD-R/RW
discs. However, audio data cannot be copied onto several CD-R/
RW discs at the same time.
Track
A track is equivalent to one audio recording and is the smallest unit
used while playing back or recording audio signals on this unit. For
detailed information, see “Data on the HDD” (P.16) or “Data on
CDs” (P.17).
Disc
Track Mark
A disc is a unit used while playing back or recording audio signals
on this unit. For detailed information, see “Data on the HDD”
(P.16) or “Data on CDs” (P.17).
A track mark is a mark made at the beginning of a track and enables
playback devices to distinguish the starting position of each audio
track. A track mark also facilitates track search and intro playback.
You can make a track mark on this unit either automatically or
manually.
Emphasis
Emphasis is a recording mode used to improve the quality of audio
data. Emphasis turns the volume of the upper register up before
recording and down while playing back, resulting in a decrease in
the noise level of the upper register.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SYSTEM MENU
You can make the following operations on this unit’s system menu according to your needs.
Menu
Menu content
Page
Album New
Edit Stored
Edits the albums on the HDD. For detailed information on each menu, see
“LIST OF EDIT MENU” (P.50) or “EDITING ALBUMS” (P.52-57).
52-57
Album Copy
Album Rename
Album Delete
Album Pack
Album Title
Track Shuffle
Track Level
Tr. Interval
Album Edit*
Track Rename
Track Adjust
Track Erase
Part Erase
Edits the tracks on the HDD. For detailed information on each menu, see
“LIST OF EDIT MENU” (P.50) or “EDITING TRACKS” (P.58-65).
58-65
Track Combine
Track Divide
Track Pack
Track Edit*
7
Add Fade In
Add Fade Out
Track Title
Disc Rename
Disc Erase
Edits the discs on the HDD. For detailed information on each menu, see
“LIST OF EDIT MENU” (P.50) or “EDITING DISCS” (P.66-69).
66-69
Disc Combine
Disc Divide
Disc Pack
Disc Edit*
Disc Title
Undo
Cancels the editing operation.
Displays the HDD capacity.
70
72
72
73
73
74
74
75
75
36
HDD Info.
HDD Utility
HDD Format
Firm. Version
Initialize
Formats the HDD.
Displays the firmware version in use.
Initializes settings for various menus.
Adjusts the display brightness.
Turn on or off the video output.
Starts playback automatically when the power is on.
Updates the firmware version.
Dimmer Setup
VIDEO Output
Auto Play
Sys. Utility
Firm. Update
OPT TH Level
COAX TH Level
Adjusts the settings for detecting track intervals in the synchronized
recording mode. For detailed information, see “Setting a condition for
synchronized recording” (P.36).
Synchro Setup ANLG TH Level
Int. Time
End Duration
DAC Mode
Converts digital/analog output signals.
71
* “Album Edit”, “Track Edit” and “Disc Edit” only display when the HDD is selected.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
RULES OF DIGITAL RECORDING AND NOTES ON SYSTEM
■ Rules of digital recording
■ Notes on system
SCMS (Serial Copy Management System)
Number and length of recordable discs and
tracks
• One CD-R or CD-RW disc, or one disc on the HDD can be
recorded with up to 99 tracks on them.
As a digital audio component, this unit conforms with the Serial
Copy Management System (SCMS) standards. The Serial Copy
Management System restricts copies made by recording digital
signals to first-generation copies only.
• Once 99 tracks have been recorded, no further recording is
possible even if space for recording is available on the disc.
The digital program sources that have been recorded cannot be
digitally recorded again.
• The minimum length of one track must be 4 seconds. If a
recording is stopped while the track is less than 4 seconds long,
this unit will record for 4 seconds, and then stop recording. The
maximum length of one track is 179 minutes 59 seconds for the
HDD.
There are 2 rules as follows:
Rule 1
Digital sources such as commercially available CDs can be copied
digitally onto other recordable digital media with this unit (a first-
generation digital copy). However, the first-generation digital copy
cannot be copied digitally any further.
• 999 discs can be created at maximum on the HDD of this unit.
However, the number of discs that can be created is limited
according to the space availability (total recordable time) on the
HDD.
Rule 2
The source that was recorded via the ANALOG LINE IN (REC)
jacks can be copied digitally onto other recordable digital media
(a first-generation digital copy). However, the first-generation
digital copy cannot be copied digitally any further.
• The maximum length of one disc on the HDD is 99 minutes 59
seconds. However, since each track on the HDD is handled in the
unit of frame (75 frames are equal to one second), the maximum
length of one track or disc may vary slightly.
• When recording on a CD-R or CD-RW disc, 2-second silence will
be automatically added to the beginning of the first track.
Therefore the actual total recordable time will be 2 seconds
shorter than the total recordable time of a CD-R or CD-RW disc.
This unit monitors the SCMS status for each track when a digital
recording is made. If the track is protected from digital recording
and copying, it is not possible to make a digital recording and copy
of that track.
The SCMS standard does not apply to analog recording and
copying.
Source sampling rate conversion
• Digital input of this unit supports sampling frequencies of 32kHz,
44.1kHz, 48kHz, and 96kHz. This unit converts these inputs to
the 44.1kHz,16-bit digital signals and records them onto the
HDD, or a CD-R or CD-RW disc.
When making a copy from a CD onto the HDD, or from the HDD
onto a CD-R or CD-RW disc, any of the copy methods described
below can be selected. The following selections are contained in
“Copy Method”.
• Analog input is also converted to the same digital signal to be
recorded.
• “Auto Dig/Anlg”:
Automatically switches to analog recording if the track cannot be
digitally recorded for SCMS.
• This unit outputs the signals at the sampling frequency of
44.1kHz, 16-bit from its digital output.
• “Digital Copy”:
Performs digital copying of only those tracks that can be digitally
copied.
Recording of non-audio signals
• This unit is designed exclusively for recording audio signals.
Recording is only possible for audio signals.
• “Digital Move”:
Performs digital copying of the tracks that cannot be digitally
copied by “Digital Copy” when copying from the HDD onto a
CD-R or CD-RW disc.
• When a CD with CD TEXT is copied onto the HDD, CD TEXT
will be automatically copied if it is not copy protected. When a
CD with CD TEXT is recorded from an external CD player, CD
TEXT cannot be copied even if it is not copy protected. To copy
CD TEXT, use the built-in CDR drive of this unit.
• “Analog Copy”:
Performs analog copying regardless of the SCMS standard.
• If the digital signals contain graphic data such as CD graphics, the
non-audio signals will not be recorded.
Digital Move
This unit has a built-in HDD with large space that makes a long
recording possible. You can create your own CD by editing the
various program sources that have been recorded onto the HDD of
this unit and copying them onto a CD-R or CD-RW disc.
• It is not possible to record from non-audio sources such as CD-
ROM or DVD.
Data processing
• A small amount of space may be used for data processing besides
recording the actual program sources.
If you want to make a digital copy of the original data that has been
created on the HDD to a CD-R or CD-RW disc, the “Digital Move”
method is convenient. You can make a digital copy from the HDD
onto a CD-R or CD-RW disc even if the track is protected from
making a second-generation copy by the SCMS standard.
• Although this unit is capable of recording 999 albums at
maximum onto the HDD, the data processing speed may slow
down if a large number of albums is created.
However, since the concept of “Digital Move” is that the data is
moved from the HDD onto a CD-R or CD-RW disc, the original
data on the HDD is erased when moving is complete.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Audio Performance
Outputs
Frequency response .................................... 5 to 20,000 Hz, 0.5 dB
ANALOG LINE OUT (PLAY)
Type ............................................................................... Pin jack
Standard output level (1 kHz, 0 dB) ..................... 2.0 0.5 Vrms
S/N ratio (EIAJ)
Playback ......................................................................... 105 dB
Recording ......................................................................... 92 dB
DIGITAL OUT (OPTICAL)
Type ............................................. Square optical connector jack
Total harmonic distortion (1 kHz)
Playback ........................................................................ 0.004 %
Recording ...................................................................... 0.006 %
DIGITAL OUT (COAXIAL)
Type ........................................................................ Coaxial jack
Standard output level ........................................ 0.5 Vp-p (75 Ω)
Dynamic range
Playback ........................................................................... 99 dB
Recording ......................................................................... 92 dB
PHONES
Standard output level (Input 150 Ω shorted, –20 dB)
............................................................................ 300 mV/150 Ω
Laser Diode Properties
General
Material ................................................................................ GaAIAs
Wavelength ................................................................. 780 to 787 nm
Power supply
[U.S.A. model] ................................................ AC 120 V, 60 Hz
[Australia model]............................................. AC 240 V, 50 Hz
[U.K. and Europe models]............................... AC 230 V, 50 Hz
Pulse durations and max. output at the objective lens of the laser
pickup unit
DC erase mode ................................ Max. 12 mW (Continuous)
Write mode ............................................................ Max. 70 mW
(Max. Cycle 98 ns, Min. Cycle 27 ns at Max. Speed)
Power consumption .................................................................. 37 W
Operating environment
Temperature ...............................................................+5 to 35°C
Humidity .............................. 30 to 90 % RH (No condensation)
7
Inputs
Dimensions (W x H x D) ............................ 435 x 115.5 x 414.5 mm
(17-1/8” x 4-1/2” x 16-5/16”)
ANALOG LINE IN (REC)
Type ............................................................................... Pin jack
Standard input level ............................................ 500 mV/24 kΩ
Weight........................................ 8.2 kg (18 lbs. 1 oz.) without HDD
DIGITAL IN (OPTICAL)
Type ............................................. Square optical connector jack
DIGITAL IN (COAXIAL)
Type ........................................................................ Coaxial jack
Standard input level .......................................... 0.5 Vp-p (75 Ω)
Specifications are subject to change without notice.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
UAB
4. Tighten the four fixing screws.
■ Formatting the HDD
If you install a new HDD, you need to format the HDD before
using with this unit.
1. Connect the AC power cable to the wall outlet and
turn on the power of this unit.
CDR-HD1500
“Format Start?” appears on the display.
2. Press w/d.
HDD Installation Manual
“Format Really” appears on the display.
3. Press w/d.
“Push PLAY KEY” appears on the display.
Fixing screws
(English)
(Screws are on the opposite side)
4. Press w/d.
“Wait” flashes on the display. After a few seconds, this unit
starts formatting of the HDD. It takes approximately 15
seconds to complete formatting.
5. Push the HDD tray and connect the IDE cable and the
INSTALLING THE HDD
power cable.
This product does not have a built-in hard disk drive (HDD) depending on the sales location. Please purchase a commercially available HDD
for internal use and install it on this unit correctly, referring to the instruction below.
• Make sure that the terminals and connectors are in the correct
direction, and connect the cables securely.
5. When formatting has been completed,“Format OK”
appears on the display.Then the display returns to
the one when the power of this unit was turned on.
• Static electricity can damage the HDD. Be careful not to
touch the terminal pins and the circuit board.
1. Loosen the two fixing screws on the HDD slot door
■ Required specifications of the HDD
Interface .................................................................... IDE/ATA type
and open the HDD slot door.
• Do not apply excessive force on the HDD tray.
Note
Data Transfer Mode ........................................ PIO mode 0 to 4 and
Multi-word DMA mode 0 to 2 compatible
You do not need to format the HDD when using a HDD formatted
with this unit. When using a HDD formatted with another
CDR-HD1500 or other device, follow “Formatting the HDD (HDD
Format” (P.72) of “CDR-HD1500 Owner’s Manual”.
Size ............................................................................. 3.5-inch type
Capacity ...................................................................... 20 to 400GB
■ Recommended HDDs
■ Installation procedures
We have checked the compatibility with CDR-HD1500 for the
following model (as of March, 2005):
Before installation
• Seagate Baraccuda 7200.7 Series/ST3160021A (160GB)
(Company and product names are trademarks of their respective
company.)
For additional information on HDDs, see your local YAMAHA
authorized dealer.
• Turn off the power of this unit and unplug the AC power
cable from the wall outlet.
• Disconnect all the connections.
Fixing screws
Power cable
IDE cable
2. Pull out the HDD tray.
• Set the HDD to SLAVE (see description below).
• Be careful not to hook the IDE cable and the power cable
over the HDD tray.
6. Close the HDD slot door and tighten the two fixing
MASTER or SLAVE setting on the HDD
• Do not apply the excessive force on the HDD tray.
screws on the HDD slot door.
It is necessary to set the HDD to MASTER or SLAVE when
connecting the HDD to the component you plan to use. This
unit is designed to operate HDD when it is set to SLAVE.
Usually, setting procedure is written on the HDD itself.
Example:When setting the ST3160021A model
3. Place the HDD on the HDD tray.
Fixing screws
• HDD is a very sensitive device. Be careful not to give any
shock to it.
The HDD is set to slave by setting no plastic shunt at any
position of the jumper switch.
Printed in Malaysia
WF51710
©2005 All Right Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|