Yamaha Blu ray Player BD A1040 User Manual

U
Blu-ray Disc Player  
BD-A1040  
Owner’s Manual  
PURE DIRECT  
SA-CD  
USB  
5V 0.5A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC INFORMATION (for US customers)  
1
2
3
IMPORTANT NOTICE: DO NOT MODIFY THIS  
UNIT!  
Compliance with FCC regulations does not guarantee that  
interference will not occur in all installations. If this product  
is found to be the source of interference, which can be  
determined by turning the unit “OFF” and “ON”, please try  
to eliminate the problem by using one of the following  
measures:  
This product, when installed as indicated in the instructions  
contained in this manual, meets FCC requirements.  
Modifications not expressly approved by Yamaha may void  
your authority, granted by the FCC, to use the product.  
IMPORTANT: When connecting this product to accessories  
and/or another product use only high quality shielded cables.  
Cable/s supplied with this product MUST be used. Follow  
all installation instructions. Failure to follow instructions  
could void your FCC authorization to use this product in the  
USA.  
NOTE: This product has been tested and found to comply  
with the requirements listed in FCC Regulations, Part 15 for  
Class “B” digital devices. Compliance with these  
requirements provides a reasonable level of assurance that  
your use of this product in a residential environment will not  
result in harmful interference with other electronic devices.  
This equipment generates/uses radio frequencies and, if not  
installed and used according to the instructions found in the  
users manual, may cause interference harmful to the  
operation of other electronic devices.  
Relocate either this product or the device that is being  
affected by the interference.  
Utilize power outlets that are on different branch (circuit  
breaker or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/reorient the  
antenna. If the antenna lead-in is 300 ohm ribbon lead,  
change the lead-in to coaxial type cable.  
If these corrective measures do not produce satisfactory  
results, please contact the local retailer authorized to  
distribute this type of product. If you can not locate the  
appropriate retailer, please contact Yamaha Corporation of  
America A/V Division, 6600 Orangethorpe Ave., Buena  
Park, CA 90620.  
The above statements apply ONLY to those products  
distributed by Yamaha Corporation of America or its  
subsidiaries.  
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)  
Responsible Party: Yamaha Corporation of America  
A/V Division  
• This device complies with Part 15 of the FCC Rules and RSS-  
Gen of IC Rules.  
Address:  
6600 Orangethorpe Avenue  
Buena Park, CA 90620, USA  
1-714-522-9011  
• Operation is subject to the following two conditions:  
1) this device may not cause harmful interference, and  
2) this device must accept any interference received including  
interference that may cause undesired operation.  
See the “Troubleshooting” section at the end of this manual if  
interference to radio reception is suspected.  
Telephone:  
Type of Equipment: Blu-ray Disc Player  
Model Name: BD-A1040  
We Want You Listening For A Lifetime  
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of  
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying  
blaring or distortion - and, most importantly, without affecting your sensitive hearing.  
Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic  
Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive  
volume levels.  
IMPORTANT  
Please record the serial number of this unit in the space  
To obtain information about disposing unwanted, end-  
of-life products in USA, please visit  
below.  
MODEL:  
Serial No.:  
The serial number is located on the rear of the unit.  
Retain this Owner’s Manual in a safe place for future  
reference.  
Caution-ii En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC WARNING  
Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate  
the equipment.  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this  
device and persons during device operation.  
To ensure compliance, operations at closer than this distance is not recommended.  
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain  
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should  
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.  
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.  
FOR CANADIAN CUSTOMERS  
To prevent electric shock, match wide blade of plug to  
wide slot and fully insert.  
CAUTION  
Use of controls or adjustments or performance of  
procedures other than those specified herein may result  
in hazardous radiation exposure.  
The laser component in this product is capable of  
emitting radiation exceeding the limit for Class 1.  
LASER Specification:  
Class 1 LASER Product  
Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm (BDs)  
Laser output: max. 1 mW  
CAUTION:INVISIBLE LASER RADIATION WHEN OPEN.  
DO NOT STARE INTO BEAM.  
LASER SAFETY  
DANGER: INVISIBLE LASER RADIATION WHEN OPEN.  
AVOID DIRECT EXPOSURE TO THE BEAM.  
This unit employs a laser. Due to possible eye injury, only  
a qualified service person should remove the cover or  
attempt to service this device.  
DANGER  
This unit emits visible laser radiation when open. Avoid  
direct eye exposure to beam. When this unit is plugged  
into the wall outlet, do not place your eyes close to the  
opening of the disc tray and other openings to look into  
inside.  
Caution-iii En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution: Read this before operating your unit.  
1
2
To assure the finest performance, please read this manual  
18 Condensation will form when the surrounding temperature  
changes suddenly. Disconnect the power cable from the  
outlet, then leave this unit alone.  
19 When using this unit for a long time, this unit may become  
warm. Turn the power off, then leave this unit alone for  
cooling.  
carefully. Keep it in a safe place for future reference.  
Install this sound system in a well ventilated, cool, dry, clean  
place-away from direct sunlight, heat sources, vibration, dust,  
moisture, and/or cold. For proper ventilation, allow the  
following minimum clearances.  
Top : 10 cm (4 in)  
Rear: 10 cm (4 in)  
20 Install this unit near the AC outlet and where the AC power  
plug can be reached easily.  
Side: 10 cm (4 in)  
21 The batteries shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
3
4
Locate this unit away from other electrical appliances,  
motors, or transformers to avoid humming sounds.  
Do not expose this unit to sudden temperature changes from  
cold to hot, and do not locate this unit in an environment with  
high humidity (i.e. a room with a humidifier) to prevent  
condensation inside this unit, which may cause an electrical  
shock, fire, damage to this unit, and/or personal injury.  
Avoid installing this unit where foreign object may fall onto  
this unit and/or this unit may be exposed to liquid dripping or  
splashing. On the top of this unit, do not place:  
– Other components, as they may cause damage and/or  
discoloration on the surface of this unit.  
– Burning objects (i.e. candles), as they may cause fire,  
damage to this unit, and/or personal injury.  
– Containers with liquid in them, as they may fall and  
liquid may cause electrical shock to the user and/or  
damage to this unit.  
Do not use this unit within 22 cm (9 inches) of persons  
with a heart pacemaker implant or defibrillator implant.  
Radio waves may affect electro-medical devices. Do not  
use this unit near medical devices or inside medical  
facilities.  
5
This unit is not disconnected from the AC power source  
as long as it is connected to the wall outlet, even if this  
unit itself is turned off by p. This state is called the  
standby mode. In this state, this unit is designed to  
consume a very small quantity of power.  
Where the mains plug or an appliance coupler is used as  
the disconnect device, the disconnect device shall  
remain readily operable.  
6
Do not cover this unit with a newspaper, tablecloth, curtain,  
etc. in order not to obstruct heat radiation. If the temperature  
inside this unit rises, it may cause fire, damage to this unit,  
and/or personal injury.  
7
8
9
Do not plug in this unit to a wall outlet until all connections  
are complete.  
Do not operate this unit upside-down. It may overheat,  
possibly causing damage.  
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR  
MOISTURE.  
Do not use force on switches, knobs and/or cords.  
10 When disconnecting the power cable from the wall outlet,  
grasp the plug; do not pull the cable.  
11 Do not clean this unit with chemical solvents; this might  
damage the finish. Use a clean, dry cloth.  
12 Only voltage specified on this unit must be used. Using this  
unit with a higher voltage than specified is dangerous and  
may cause fire, damage to this unit, and/or personal injury.  
Yamaha will not be held responsible for any damage resulting  
from use of this unit with a voltage other than specified.  
13 To prevent damage by lightning, keep the power cable  
disconnected from a wall outlet or this unit during a lightning  
storm.  
14 Do not attempt to modify or fix this unit. Contact qualified  
Yamaha service personnel when any service is needed. The  
cabinet should never be opened for any reasons.  
15 When not planning to use this unit for long periods of time  
(i.e. vacation), disconnect the AC power plug from the wall  
outlet.  
16 Be sure to read the “Troubleshooting” section on common  
operating errors before concluding that this unit is faulty.  
17 Before moving this unit, press p to set this unit to the  
standby mode, and disconnect the AC power plug from the  
wall outlet.  
Caution-iv En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1
2
3
4
5
1. Introduction  
5. Additional information  
2. Connection  
(at the end of this manual)  
New software that provides additional features or  
product improvements will be released as needed. We  
recommend upgrading the software of this Player to  
the latest version periodically. For details, refer to  
“Software upgrade” (p. 42).  
3. Playback  
Operating this Player from mobile devices  
Using Picture in Picture function  
About this manual  
– This manual describes how to operate this Player  
using a remote control except when it is not  
available. Some of these operations are also  
available using the front panel buttons.  
– Notes contain important information about safety  
and operating instructions. Hint(s) indicates a tip for  
your operation.  
– This manual is printed prior to production. Design  
and specifications are subject to change in part as a  
result of improvements, etc. In case of differences  
between the manual and the product, the product has  
priority.  
The icons used in this manual  
Icons are used to indicate available buttons/functions for a  
particular format. For details on playable discs and  
formats, see page 3.  
: BD-Video  
BD  
: DVD-Video, DVD-VR, DVD+VR, DVD-Audio  
DVD  
CD  
4. Settings  
: Audio CD, Super Audio CD  
: Video files  
VIDEO  
MUSIC  
PHOTO  
: Audio files  
: Photo files  
1 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
What you can do with this Player  
Various discs  
Network streaming  
contents  
Wireless network  
(WPS supported)  
USB contents  
PC/NAS contents  
(DLNA)  
Bluetooth device  
(smartphone, etc.)  
Smartphone contents  
(Miracast)  
Wide variety of supported discs and file formats  
– Blu-ray Disc™, DVDs, SA-CDs and CDs (p. 27)  
– Blu-ray 3D™ (p. 12), BONUSVIEW™ and BD-Live™ (p. 29)  
– Video, music and photo files on DVD-R/RW discs, CD-R/RW discs and USB memory devices (p. 20)  
Enhanced network features  
– Enjoying DLNA server (PC or NAS) contents (p. 20)  
– Enjoying streaming contents on the network services (p. 22)  
®
– Enjoying music via Bluetooth (p. 24)  
– Operating this player from mobile devices (AV CONTROLLER) via network (p. 26)  
– Enjoying smartphone pictures and videos on the TV screen (Miracast™) (p. 26)  
Easy setup and operations  
– Quick and easy initial setup (p. 19)  
– Automatic wireless setup with the WPS (Wi-Fi Protected Setup) (p. 19)  
– Software upgrade via network or USB (p. 42)  
– Sequential operations of the TV, AV receiver and this Player (HDMI Control) (p. 34)  
High-quality audio features  
– Up to 192-kHz/24-bit audio supported (p. 3)  
– DSD and PCM output for SA-CD playback (p. 4)  
– DVD-Audio supported (p. 3)  
Supplied parts  
Make sure the following accessories are provided with the product.  
Remote control  
Batteries (×2)  
(AAA, R03, UM-4)  
Power cable  
2 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
About discs and files  
1
Types of discs/files that can be  
Notes  
used with this Player  
– Playback of a file listed in the chart above is not  
guaranteed depending on methods of file creation or  
codecs used.  
– Playback of all files on the disc, USB memory  
device and network is not guaranteed.  
– A copyright protected file cannot be played back.  
– When using DLNA, a file needs to meet the DLNA  
sever requirement.  
– 12 cm (5”) and 8 cm (3”) discs can be played back in  
this Player. Do not use an 8 cm (3”) to 12 cm (5”)  
adapter.  
– Use discs that conform to compatible standards as  
indicated by the presence of official logos on the  
disc label. Playback of discs not complying with  
these standards is not guaranteed. In addition, the  
image quality or sound quality is not guaranteed  
even if the discs can be played back.  
Region management information for  
Blu-ray Disc/DVD videos  
Media Type  
Recording Format  
BD-Video/Data files  
BD-ROM/BD-R/  
BD-RE  
– Blu-ray Disc/DVD video players and discs have  
region codes, which dictate the regions in which a  
disc can be played. Verify the region code mark on  
the rear panel of this Player.  
– For a Blu-ray Disc, the disc can be played back on  
this Player with the same region code mark, or the  
region code “ABC” mark.  
DVD-ROM  
DVD-Video/DVD-Audio  
DVD-R/DVD-R  
DL/DVD-RW  
DVD-Video/DVD-VR/AVCHD/Data files  
DVD+R/DVD+R  
DL/DVD+RW  
DVD-Video/DVD+VR/AVCHD/Data files  
CD-ROM  
CD-R/CD-RW  
SA-CD  
CDDA/HDCD  
CDDA/Data files  
SA-CD  
– For a DVD disc, the disc can be played back on this  
Player with the same region code mark, or the region  
code “ALL” mark.  
USB*  
Data files  
Region management information  
DLNA  
Data files  
Destination  
BD-Video  
DVD-Video  
* This Player is compatible with a USB memory device  
formatted with FAT 16/32 and NTFS.  
U.S.A. and Canada  
Region code “A” or Region number “1”  
“ABC”  
or “ALL”  
Playable audio  
file formats  
Playable video  
file formats  
Playable photo  
file formats  
ALL  
1
MUSIC  
VIDEO  
PHOTO  
*1  
DivX (.divx)  
MKV with DivX  
format (.mkv)  
MKV with H.264  
(.mkv)  
JPEG (.jpeg/.jpg)  
GIF (.gif)  
PNG (.png)  
MP3 (.mp3)  
Europe  
Region code “B” or Region number “2”  
*2  
WMA (.wma)  
“ABC”  
or “ALL”  
AAC (.aac/.m4a)  
*3  
WAV (.wav)  
FLAC (.flac)  
*3  
ALL  
2
MPEG PS (.mpeg/  
.mpg)  
*3  
ALAC (.m4a)  
MPEG TS (.ts)  
MPEG-4 (.mp4)  
VOB (.vob)  
AVI (.avi)  
Asia and Taiwan  
Region code “A” or Region number “3”  
“ABC”  
or “ALL”  
ASF (.asf)  
WMV (.wmv)  
ALL  
3
*4  
*1 Sampling frequency within 32-48 kHz (Stereo) and  
bitrate within 8-320 kbps  
*2 Sampling frequency within 32-48 kHz (Stereo) and  
bitrate within 32-192 kbps  
Central and South  
America  
Region code “A” or Region number “4”  
“ABC”  
or “ALL”  
*3 Sampling frequency of up to 192 kHz/24 bit (LPCM/  
Stereo)  
ALL  
4
*4 WMV9 (maximum resolution: 1,920 x 1,080)  
Australia  
Region code “B” or Region number “4”  
“ABC”  
or “ALL”  
ALL  
4
3 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
About discs and files  
Region management information  
Destination BD-Video DVD-Video  
Russia Region code “C” or Region number “5”  
About Super Audio CD (SA-CD)  
– Audio format based upon the current CD standards  
but includes a greater amount of information that  
provides higher quality sound. There are three types  
of discs: single layer, dual layer and hybrid discs.  
The hybrid disc can be played on existing CD  
players as well as Super Audio CD players since it  
contains both standard audio CD and Super Audio  
CD information.  
“ABC”  
or “ALL”  
ALL  
5
Notes  
– Blu-ray Disc/DVD video operations and functions  
may be different from the explanations in this  
manual and some operations may be prohibited due  
to disc manufacturer’s settings.  
Super Audio CD disc type  
Dual layer disc Hybrid layer disc  
Single layer disc  
– If a menu screen or operating instructions are  
displayed during playback of a disc, follow the  
operating procedure displayed.  
CD layer  
HD layer  
HD layer  
HD layer  
– Playback for some of the discs may not be possible  
depending on the disc.  
– Finalize all recording media that is played back in  
this Player.  
Hybrid Super Audio CD disc  
CD layer that plays on any  
CD player  
– “Finalize” refers to a recorder processing a recorded  
disc so that it will play in other players/recorders as  
well as this Player. Only finalized discs can be  
played back in this Player. (This Player does not  
have a function to finalize discs.)  
1
High Density layer containing:  
- High Quality DSD Stereo  
2
- High Quality DSD Multi-channel  
3
Hint  
– You can select the output audio signals from DSD or  
Note  
– This unit does not show the text data included in the  
discs on the front panel display.  
Loading a disc  
– Insert the disc with the label facing up.  
– In case of the disc recorded on both sides, face down  
the side to play back.  
Notes  
– Playback may begin automatically, depending on the  
disc and setting of this Player.  
– The menu may be displayed first, depending on the disc.  
– The disc load time may vary depending on the disc.  
4 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
About discs and files  
Disc precautions  
Notice for watching 3D video  
1
images  
Be careful of scratches and dust  
– Some people may experience discomfort (such as  
eye strain, fatigue, or nausea) while watching 3D  
video images. We recommend that all viewers take  
regular breaks while watching 3D video images.  
– If you experience any discomfort, stop watching the  
3D video images until the discomfort subsides.  
Consult a doctor if you experience severe  
discomfort.  
– Blu-ray Disc, DVD and CD discs are sensitive to dust,  
fingerprints and especially scratches. A scratched disc  
may not be able to be played back. Handle discs with  
care and store them in a safe place.  
Proper disc storage  
– Read the owner’s manuals (Blu-ray Disc and TV)  
and/or the caution messages that appear on the TV  
carefully.  
Place the disc in the center of the disc case  
and store the case and disc upright.  
Avoid storing discs in locations subject to  
direct sunlight, close to heating appliances  
or in locations of high humidity.  
– The vision of young children (especially those under  
six years old) is still under development. Consult  
your doctor (such as a pediatrician or eye doctor)  
before allowing young children to watch 3D video  
images.  
– Adults should supervise young children to ensure  
they follow the recommendations described above.  
Do not drop discs or subject them to  
strong vibrations or impacts.  
Avoid storing discs in locations where  
there are large amounts of dust or  
moisture.  
Cinavia technology  
– Cinavia technology is a part of the content protection  
system included in your Blu-ray Disc Player.  
Handling precautions  
Note  
– If the surface is soiled, wipe gently with a  
soft, damp (water only) cloth. When  
wiping discs, always move the cloth from  
the center hole toward the outer edge.  
– The following messages may be displayed and  
playback stopped or audio outputs temporarily  
muted by your Blu-ray Disc player if you are playing  
an unauthorized copy of content that is protected by  
Cinavia technology.  
– Do not use record cleaning sprays,  
benzene, thinner, static electricity  
prevention liquids or any other solvent.  
These messages are displayed in English only.  
– Do not touch the surface.  
Playback stopped. The content being played is  
protected by Cinavia® and is not authorized for  
playback on this device.  
Message Code 1.  
– Do not stick paper or adhesive labels to the disc.  
– If the playing surface of a disc is soiled or scratched,  
the Player may decide that the disc is incompatible  
and eject the disc tray, or it may fail to play the disc  
correctly. Wipe any dirt off the playing surface with  
a soft cloth.  
Audio outputs temporarily muted. Do not adjust  
the playback volume. The content being played  
is protected by Cinavia® and is not authorized  
for playback on this device.  
Message Code 3.  
Cleaning the pick up lens  
– Never use commercially available cleaning discs.  
The use of these discs can damage the lens.  
– Request the nearest service center approved by  
Yamaha to clean the lens.  
Cinavia Notice  
This product uses Cinavia technology to limit the use of  
unauthorized copies of some commercially-produced film  
and videos and their soundtracks. When a prohibited use  
of an unauthorized copy is detected, a message will be  
displayed and playback or copying will be interrupted.  
More information about Cinavia technology is provided at  
the Cinavia Online Consumer Information Center at  
information about Cinavia by mail, send a postcard with  
your mailing address to: Cinavia Consumer Information  
Center, P.O. Box 86851, San Diego, CA, 92138, USA.  
5 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Controls and functions  
Front panel  
PURE DIRECT  
SA-CD  
USB  
5V 0.5A  
1 2  
3 4  
5
6 7 8  
9
0
A
B
1 p (On/Standby)  
7
8
(Search backward/Skip backward)  
Press to skip backward, and press and hold to search  
backward.  
Turns this Player on/Sets to standby mode.  
Press and hold p on the front panel for more than 5  
seconds to reset this Player (system reset).  
(Search forward/Skip forward)  
Press to skip forward, and press and hold to search  
forward.  
3 SA-CD indicator  
Lights up when an SA-CD is loaded and the SA-CD  
layer (p. 4) is selected.  
9
0
A
(Play)  
Starts a playback.  
4 Front panel display  
(Pause)  
Pauses a playback.  
Displays various information for operational status.  
5 Disc tray door  
(Stop)  
Stops a playback.  
6
(Eject)  
Opens/Closes the disc tray.  
B PURE DIRECT  
Press to change the Pure Direct mode (p. 10).  
This button lights up when Pure Direct is enabled.  
Note  
– Remove the protective film from the front panel before operating the Player.  
6 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Controls and functions  
Rear panel  
1
OUT  
IN  
RS-232C  
DIGITAL OUT  
COAXIAL  
HDMI  
AC IN  
NETWORK  
REMOTE CONTROL  
AUDIO OUT  
OPTICAL  
USB  
1
2
3
4
5
6
7
5 AUDIO OUT (L/R) (p. 14)  
2 DIGITAL OUT (COAXIAL/OPTICAL) (p. 14)  
6 REMOTE CONTROL (OUT/IN/RS-232C) (p. 18)  
7 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Controls and functions  
1 Infrared signal transmitter: Outputs infrared  
signal. Aim this window to the remote control sensor  
Remote control  
Note  
2 p: Turns this Player on or sets it to standby mode.  
will appear on the top left corner of the screen  
when the pressed button is not available.  
3
: Opens/closes the disc tray.  
4 Color buttons : Use these buttons according to  
BD  
1
2
on-screen instructions.  
ZOOM  
: Zooms in/out. The  
DVD VIDEO PHOTO  
size of the screen will change each time you press the  
button (zoom in/out: 3 steps each).  
3
RED  
GREEN  
YELLOW  
BLUE  
4
PROGRAM  
: Sets the order of playback  
DVD CD  
I
J
(p. 29). You can set up to 15 tracks (for an audio disc)  
or titles/chapters (DVD-Video).  
5
K
L
M
SHUFFLE  
:
VIDEO  
DVD CD  
MUSIC PHOTO  
6
7
Selects shuffle play mode (p. 27).  
REPEAT  
BD DVD CD VIDEO MUSIC  
N
O
P
8
9
0
A
: Changes repeat mode. Repeat mode shown  
PHOTO  
below will change each time you press the button.  
TOP MENU  
POP-UP MENU  
: Repeats the title being played back.  
: Repeats the chapter being played back.  
: Repeats the folder being played back.  
ENTER  
B
C
D
RETURN  
ON SCREEN  
: Repeats all tracks/files on the disc.  
Q
: Repeats the track/file being played back.  
5 Number buttons: Enters numbers, or during  
playback, jumps to the track/chapter corresponding to  
the number you input. These buttons may not be  
available depending on the disc type and playback  
condition.  
SETUP  
STATUS  
E
F
G
DIMMER  
PAGE  
R
6 CLEAR: Clears entered number/set item.  
Bluetooth  
PURE DIRECT SA-CD/CD  
H
S
t
7 PIP  
: Turns on/off the Picture in Picture (p. 30).  
BD  
PIP Mark (  
) is displayed on the screen when this  
function is available. You can also select this item from  
On Screen menu (p. 27).  
Note  
– PIP Mark is displayed only when the PIP Mark is set  
8 MIRACAST: Starts Miracast (p. 26).  
8 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Controls and functions  
E SETUP: Displays SETUP menu screen (p. 31).  
9 2ND AUDIO  
: Selects the secondary audio of the  
BD  
1
Picture in Picture (p. 30) or audio commentaries. The  
Secondary Audio Mark ( ) is displayed on the  
F STATUS: Displays the playback information (p. 28).  
G DIMMER: Changes the brightness of the front panel  
display in four steps.  
screen when this function is available (p. 38). You can  
also select this item from On Screen menu (p. 27).  
H Bluetooth: Starts Bluetooth (p. 24).  
I REPEAT A/B  
:
Note  
BD DVD CD VIDEO MUSIC  
Plays back a specific part you want to repeat.  
– Secondary Audio Mark is displayed only when  
Secondary Audio Mark is set to on (p. 35).  
1 Press REPEAT A/B at the scene where you want to  
set the start point. “A-” is displayed on the screen.  
0 HOME: Displays the HOME menu screen (p. 20).  
2 Press REPEAT A/B again at the scene where you  
want to set the end point. “A-B” is displayed on the  
screen. Repeat playback starts.  
A TOP MENU  
: Displays the top menu  
BD DVD  
screen if the disc contains a menu. Select the desired  
item using 5/a/2/3 and ENTER.  
3
To cancel the repeat playback, press REPEAT A/B  
“A-B” disappears and the repeat playback is  
finished.  
.
Note  
– Specific operations may be different depending on  
the disc. Follow the instructions of each menu  
screen.  
Note  
– This function cannot be performed depending on the  
specifications of the disc.  
B Cursor buttons (5/a/2/3): Moves the focus in  
the menu screen.  
ENTER: Selects the focused menu/item.  
J SUBTITLE  
: Changes subtitle  
BD DVD VIDEO  
languages (p. 48) if available. You can also select this  
item from On Screen menu (p. 27).  
C RETURN: Returns to the previous menu or screen,  
etc.  
D Control buttons  
K ANGLE  
: Changes the camera angle if  
BD DVD  
BD DVD CD VIDEO MUSIC PHOTO  
video is recorded with multiple angles. The Angle  
Mark ( ) is displayed on the screen when this  
: Stops playback.  
: Pauses playback.  
: Plays back contents.  
function is available. You can also select this item  
from On Screen menu (p. 27).  
/
: Skips backward/forward.  
Note  
/
– Angle Mark is displayed only when the Angle Mark  
:
BD DVD CD VIDEO MUSIC  
Searches backward/forward. The search speed will  
change each time you press the button (search  
L AUDIO  
: Changes the audio  
BD DVD VIDEO  
language or format. You can also select this item from  
On Screen menu (p. 27).  
backward/forward: 5 steps each). Press  
normal playback.  
to resume  
M SEARCH  
:
BD DVD CD VIDEO MUSIC  
: Changes the speed of a slide show (slower/  
PHOTO  
Jumps to a specified point during playback. For details  
on this function, refer to “Using Search” (p. 29). You  
can also select this item from status menu (p. 28).  
faster: 3 steps).  
/
N YouTube: Starts YouTube (p. 23).  
O vudu: Starts VUDU (p. 23).  
:
BD DVD CD VIDEO MUSIC  
Press for instant search/replay. Instant search skips the  
content 30 seconds. Instant replay replays the content  
from 10 seconds before.  
Continued to the next page. \  
9 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
Controls and functions  
P POP-UP/MENU  
: Displays pop-up  
BD DVD  
menu. The menu contents displayed vary depending  
on the disc. For details on how to see and operate the  
pop-up menu, refer to the manual for the disc.  
The top menu screen may be displayed by pressing  
POP-UP/MENU depending on the DVD.  
1
2
3
GREEN  
YELLOW  
BLUE  
RED  
4
Q ON SCREEN: Displays On Screen menu (p. 27).  
I
J
R PAGE (+/-)  
: Moves to a previous/next page  
DVD  
when a DVD-Audio disc including the slide show or  
page turn feature is played.  
5
K
L
M
6
Note  
7
– This function may not be performed depending on  
the content of the disc.  
N
O
P
8
9
0
A
B
S SA-CD/CD: Selects the layer to be played when an  
TOP MENU  
POP-UP MENU  
SA-CD/CD hybrid disc (p. 4) is played back.  
Hint  
ENTER  
– The SA-CD indicator (p. 6) on the front panel lights  
up when an SA-CD is loaded and the SA-CD layer is  
selected.  
RETURN  
ON SCREEN  
C
Q
Notes  
D
– This operation is available only when no disc is  
loaded.  
SETUP  
STATUS  
– Audio signals are not output from the COAXIAL or  
OPTICAL jack when the SA-CD layer is selected.  
E
F
G
DIMMER  
PAGE  
R
T PURE DIRECT: Switches between the following  
Pure Direct modes.  
Bluetooth  
PURE DIRECT SA-CD/CD  
Mode 1: Enables Pure Direct with turning off the  
front panel display and disabling HDMI video  
outputs. This mode is suitable for listening audio with  
high quality sound.  
H
S
t
Mode 2: Enables Pure Direct with turning off the  
front panel display. This mode is suitable for watching  
movies with high quality sound.  
Off: Disables Pure Direct.  
Hint  
– The PURE DIRECT button (p. 6) on the front panel  
lights up when Pure Direct is enabled.  
10 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Controls and functions  
Loading the batteries in the remote  
control  
ID function  
1
When using multiple Yamaha products, the remote control  
may work on another Yamaha product or another remote  
control may work on this Player. In this case, change the  
remote control ID to prevent unwanted operation. If you  
have changed the remote control ID, make sure that you  
select the same ID for the main unit.  
1
3
The default setting is ID1.  
1 Remote control setting  
2
To change the ID from ID1 to ID2, press and hold  
the red color button and 2 of number button  
simultaneously for 7 seconds. To change the ID  
from ID2 to ID1, press and hold the red color button  
and 1 of number button simultaneously for 7  
seconds.  
Notes  
– Change both batteries when the operation range of  
the remote control decreases.  
– Use AAA, R03, UM-4 batteries.  
2 Main unit setting  
Press and hold  
and  
on the  
front panel simultaneously for 2 seconds to display  
current ID when:  
No disc is inserted in this Player.  
The disc tray is closed.  
– Make sure that the polarities are correct. Refer to the  
illustration inside the battery compartment.  
– Remove the batteries if the remote control is not to  
be used for an extended period of time.  
– Do not use old batteries together with new ones.  
– Do not use different types of batteries (such as  
alkaline and manganese batteries) together. Read the  
packaging carefully as these different types of  
batteries may have the same shape and color.  
– If the batteries have leaked, dispose of them  
immediately. Avoid touching the leaked material or  
letting it come into contact with clothing, etc. Clean  
the battery compartment thoroughly before installing  
new batteries.  
– Do not throw away batteries with general house  
waste; dispose of them correctly in accordance with  
your local regulations.  
– Keep batteries away from children. If a battery is  
accidentally swallowed, contact your doctor  
immediately.  
Playback is stopped.  
“NO DISC” is displayed on the front panel  
display.  
Keep pressing and holding the keys for another 2  
seconds to change the ID between ID1 and ID2.  
Notes  
– If the remote control is without batteries for a few  
minutes or if exhausted batteries remain in the  
remote control, the remote control ID is  
automatically set to ID1. If you want to use the  
remote control in ID2 setting, install new batteries  
and set the remote control ID again.  
– When this Player is reset, its remote control ID will  
be ID1.  
– When not planning to use the remote control for long  
periods of time, remove the batteries from the  
remote control.  
– Do not charge or disassemble the supplied batteries.  
Approximate operating range of  
remote control  
Remote control sensor  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
30°  
30°  
6 m (20 ft)  
11 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
CONNECTION  
Video/audio connections  
Make the corresponding video/audio cable connections depending on the equipment you want to use.  
Hints  
– See page 40 for information on the audio/video output formats.  
– Prepare commercially available cables required for connections. The type and number of cables you need vary  
depending on the equipment to be connected.  
Enjoying video/audio using a TV and an AV receiver  
Refer to “Connecting to a TV via an AV receiver” (p. 13).  
AV receiver  
TV  
This Player  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
Video/audio  
(HDMI)  
Video (HDMI)  
Speakers  
Audio  
Enjoying video/audio using only a TV  
Refer to “Connecting to a TV directly” (p. 13).  
TV  
This Player  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
Video/audio  
(HDMI)  
Enjoying video/audio using a TV and audio equipment  
Refer to “Connecting to a TV and audio equipment” (p. 14).  
TV  
This Player  
Video (HDMI)  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
Audio equipment  
(such as sound bar)  
Audio  
(coaxial, optical or analog)  
About HDMI  
Connection for the playback of Blu-ray  
3D Discs  
To enjoy Blu-ray 3D Discs on this Player, your system  
must meet the following conditions.  
To enjoy high quality video and digital sound through the  
HDMI terminal, use commercially available HIGH  
SPEED HDMI cables that have the HDMI logo (as shown  
on the back cover).  
– Your TV and AV receiver (if available) must support  
the 3D feature.  
– 3D Output in Display Setting (p. 37) is set to “Auto”.  
Hints  
– For information on the HDMI Control function, refer  
– To change the output mode of HDMI terminal,  
configure “HDMI” (p. 38) in Audio Setting.  
12 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Video/audio connections  
Connecting to a TV via an AV  
Connecting to a TV directly  
Connect this Player to the TV with an HDMI cable.  
receiver  
Connect this Player to the AV receiver and the AV  
receiver to the TV with HDMI cables.  
For details on speaker connections, refer to the owner’s  
manuals of the AV receiver and speakers.  
2
Caution!  
Caution!  
Do not connect the power cable of this  
Player until all connections are completed.  
Do not connect the power cable of this  
Player until all connections are completed.  
This Player  
This Player  
DIGITAL OUT  
DIGITAL OUT  
COAXIAL  
HDMI  
COAXIAL  
HDMI  
NETWORK  
NETWORK  
OPTICAL  
OPTICAL  
USB  
USB  
HDMI  
HDMI  
HDMI terminal  
HDMI terminal  
HDMI cable  
HDMI cable  
HDMI input  
HDMI IN  
AV receiver  
Speaker  
connections  
Speakers  
HDMI output  
HDMI OUT  
HDMI input  
HDMI IN  
TV  
HDMI cable  
HDMI input  
HDMI IN  
TV  
13 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Video/audio connections  
Connecting to a TV and audio equipment  
Connect this Player to the TV with an HDMI cable, and this Player to the audio equipment with an audio cable (digital  
optical, digital coaxial or stereo pin cable).  
Caution!  
Do not connect the power cable of this Player until all connections are completed.  
This Player  
DIGITAL OUT  
COAXIAL  
HDMI  
NETWORK  
AUDIO OUT  
OPTICAL  
USB  
HDMI  
AUDIO OUT  
COAXIAL  
OPTICAL, COAXIAL or  
AUDIO OUT L/R jacks  
HDMI output  
OPTICAL  
Audio cable  
(digital optical, digital coaxial or  
stereo pin cable).  
HDMI cable  
Audio input  
(digital optical, digital coaxial or  
analog stereo)  
HDMI input  
HDMI IN  
OPTICAL  
COAXIAL  
AUDIO  
TV  
Audio equipment  
(such as sound bar)  
Hints  
– To change the output mode of COAXIAL/OPTICAL jacks, configure “Coaxial/Optical” (p. 38) in Audio Setting.  
– If the playback audio is output from both the TV speakers and audio equipment, set HDMI in Audio Setting to Off  
to disable the audio output to the TV.  
– Audio signals of SACDs cannot be output from the COAXIAL or OPTICAL jack (p. 41).  
14 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Network connection  
By connecting this Player to the network (wireless or wired), you can use the following features.  
– Playing back DLNA server (PC or NAS) contents (p. 20)  
2
– Playing back various network service contents (p. 22)  
– Operating this Player from mobile devices (AV CONTROLLER) (p. 26)  
Notes  
– To use the network services or BD-Live feature, a broadband internet connection is required.  
– Refer to the operation manual of the equipment you have as the connected equipment and connection method may  
differ depending on your network environment.  
– Use a network cable/router supporting 10BASE-T/100BASE-TX.  
Hint  
– If you are using a router that supports DHCP, you do not need to configure any network settings for this Player, as  
the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure  
the network settings if your router does not support DHCP or if you want to configure the network parameters  
manually (p. 36).  
Wireless connection  
Wired connection  
Connect this Player to your network (router) with a  
commercially available Shielded Twisted Pair (STP)  
network cable.  
By using the Wi-Fi feature of this Player, you can connect  
this Player to your network (router) wirelessly. To use the  
Wi-Fi feature, refer to “Wireless connection setting”  
(p. 19) and configure the wireless connection setting.  
This Player  
This Player  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
DIGITAL OUT  
COAXIAL  
HDMI  
NETWORK  
AUDIO  
OPTICAL  
USB  
NETWORK  
NETWORK  
terminal  
Internet  
Modem  
Router  
PC  
Network cable  
LAN terminal  
LAN  
Internet  
Modem  
Router  
PC  
15 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Network connection  
DLNA server setup  
By using DLNA, you can share multimedia contents (such as videos, music and photos) stored on your DLNA server  
(PC or NAS) connected to your network, and enjoy those contents with this Player.  
In addition, you can use your mobile device (such as a smartphone and a tablet) as a wireless controller to operate this  
Player through the network.  
To use the DLNA features, perform the following DLNA server setup after making the network connection (p. 15).  
Notes  
– To use DLNA features, all the devices must be connected to the same network.  
– To use a NAS as a DLNA server, the NAS must be compatible with DLNA.  
DLNA  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
This Player  
DLNA server  
(PC or NAS)  
Remote control  
Controller  
(mobile device)  
Media sharing setting on DLNA server  
Using a mobile device as a media  
controller  
If you have a mobile device (such as smartphone and  
tablet) that supports the Digital Media Controller (DMC)  
feature, you can operate this Player from your smart phone  
or tablet through the network.  
To play back multimedia contents stored on your DLNA  
server (PC or NAS), first you need to configure the media  
sharing setting on the DLNA server software installed on  
the DLNA server.  
Hint  
Hints  
– For information about DLNA server setting or file  
formats supported by DLNA server, refer to the  
owner’s manuals of your DLNA server and its  
software.  
– To allow the mobile device to control this Player, set  
DMC Control (p. 36) in the SETUP menu to Enable  
(default).  
– To check that your mobile device supports the DMC  
feature, refer to the owner’s manuals of your mobile  
device and its software.  
1 Turn on your DLNA server (PC or NAS) and this  
Player.  
2 If you are using a PC as a DLNA server, check that  
DLNA server software (such as Windows Media  
Player 12) is installed on your PC.  
3 On your DLNA server, enable media sharing and allow  
media to be shared with this Player.  
Now the DLNA server setting is complete. To enjoy  
the DLNA server contents on this Player, select a  
DLNA server and multimedia file from the HOME  
16 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
USB connection  
By connecting a USB memory device to the USB connector on the front or the rear panel of this Player, you can play  
multi-media files stored on the USB memory device (p. 20).  
2
Notes  
– Yamaha cannot guarantee that all brands’ USB memory devices will operate with this Player.  
– Connect a USB memory device to one of the USB connectors (front/rear) of this Player when using BD-Live  
This Player  
This Player  
DIGITAL OUT  
COAXIAL  
HDMI  
NETWORK  
USB  
5V 0.5A  
OPTICAL  
USB  
USB  
USB  
USB connector (front)  
USB memory device  
USB connector (rear)  
USB memory device  
17 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Other connections  
Connecting to the REMOTE  
Hints  
CONTROL jacks  
– If your AV receiver is a Yamaha product and has the  
capability to transmit SCENE control signals from  
the REMOTE OUT jack, you can control the Player  
with the SCENE function. For details about the  
SCENE function, refer to the owner’s manual  
supplied with your Yamaha AV receiver.  
– You can connect a Yamaha component (such as CD  
player) supports the SCENE function to the  
REMOTE CONTROL (OUT) jack of this Player.  
– The RS-232C terminal is a control expansion  
terminal for commercial use. Consult your dealer for  
details.  
– You can transmit and receive the remote control  
signals by connecting to the REMOTE CONTROL  
(OUT/IN) jacks.  
– Firmly connect monaural 3.5 mm mini plug cables  
(commercially available) to the REMOTE  
CONTROL (OUT/IN) jacks.  
Caution!  
Do not connect the power cable of this  
Player until all connections are completed.  
This Player  
Connecting the power cable  
– After all connections are completed, plug the  
supplied power cable into the AC IN on the rear of  
the Player. Then plug into AC outlet.  
OUT  
IN  
RS-232C  
REMOTE CONTROL  
AUDIO OUT  
32C  
AC IN  
To REMOTE  
CONTROL  
(OUT) jack  
To REMOTE  
CONTROL (IN)  
jack  
Monaural 3.5 mm  
mini plug cable  
Monaural 3.5 mm mini  
plug cable  
To remote  
control out  
jack  
To remote  
control in  
jack  
To AC outlet  
REMOTE CONTROL IN  
REMOTE CONTROL OUT  
Yamaha component  
Infrared signal receiver  
or Yamaha component  
(such as AV receiver)  
18 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
PLAYBACK  
Initial settings  
3 Press 2/3 to select Yes, then press ENTER.  
Setting with the Easy Setup  
Easy Setup allows you to set language, resolution, and  
screen aspect ratio easily. Easy Setup screen is displayed  
when you turn this Player on for the first time after  
purchase. Same setting can be performed from SETUP  
menu = System = Easy Setup.  
3
1 When Easy Setup screen is displayed, press ENTER to  
start Easy Setup.  
4 Press 2/3 to select one of the following setup  
methods, then press ENTER.  
2 Set the language, resolution, and screen aspect ratio by  
following the on-screen messages.  
Notes  
– When no picture is displayed after Easy Setup is  
completed, refer to “Troubleshooting” (p. 44).  
– A warning message concerning 3D video playback  
appears when this Player is turned on. Press ENTER  
to dismiss the message or CLEAR to disable it  
Scan: Select this option to search for available wireless  
networks. When the network list is displayed, select the  
SSID to be connected and enter the password.  
Manual: Select this option to enter the network  
information (such as SSID) manually.  
Auto: Select this option to use the WPS function. Select  
PBC (Push Button Configuration) or PIN code method,  
then follow the on-screen messages.  
Wireless connection setting  
To connect this Player to your network (router) wirelessly,  
follow the procedure below to configure the wireless  
connection setting.  
If your router (access point) supports the WPS (Wi-Fi  
Protected Setup) function, you can use the auto setup  
method to connect this Player to the router without  
entering network information (such as SSID) manually.  
Notes  
– For details on operations of your router (access  
point), refer to the owner’s manual of it.  
– When the WPS function does not work, select  
“Scan” or “Manual” to configure the wireless  
connection settings.  
– Devices that use a 2.4 GHz frequency band, such as  
a microwave, Bluetooth, or digital cordless device,  
may interrupt the wireless communication. Move  
this Player away from such devices, or turn off such  
devices.  
1 Press SETUP to display the SETUP menu screen.  
2 Select General Setting = Network = Connection  
setting = Wireless.  
– The speed of a wireless network connection depends  
on your network environment (router type, distance  
between the router and this Player, installation  
places, etc.). In case the sound or video is interrupted  
during playback, move this Player closer to the  
router or change the orientation of this Player or the  
antenna of the router.  
19 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
HOME menu  
The HOME menu allows you to perform the following basic operations of this Player.  
– Browsing and playing multi-media files on various discs, USB memory devices and your DLNA servers (PC or  
NAS)  
– Accessing to various network services (p. 22)  
– Displaying the SETUP menu (p. 31)  
Hints  
– For details on playable discs and formats, see page 3.  
– To play DLNA server contents on this Player, the media sharing setting (p. 16) on the DLNA server should be  
configured.  
Playing back photo/music/video  
2 Press 5/a to select the item which contains the file  
you want to play back, then press ENTER.  
Basic operation  
2/3/5/a: Moves the focus.  
2: Returns to the parent folder.  
HOME: Moves to/exits HOME menu screen.  
ENTER: Confirms the folder/file.  
TOP MENU  
POP-UP MENU  
ENTER  
Note  
RETURN  
ON SCREEN  
– If your DLNA server is not listed, check that the  
DLNA server is turned on and select DLNA Search  
to update the list.  
Common operations for playing back  
files in a selected folder  
Example: Selecting a movie file on a USB memory  
device  
3 Select the Photo, Music, Video or AVCHD folder you  
want to play back, then press ENTER.  
To return to the parent folder, press RETURN or select  
.
Note  
– Stop the playback of the video before you move to  
HOME menu screen.  
1 Press HOME to move to HOME menu screen.  
20 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
HOME menu  
Note  
Operations for viewing photos  
– Note that the only the file type selected on this step  
will be displayed in the following step. For example,  
if you selected Photo folder in this step, only photo  
files are displayed after this step.  
While viewing photos, the buttons on the remote control  
work as shown below.  
: Stops slide show and returns to the file browser.  
: Pauses a slide show.  
: Plays a slide show.  
4 Select the folder containing the file you want to play  
: Moves to a next photo.  
back.  
: Moves to a previous photo.  
3
: Makes a slide show faster in 3 steps.  
: Makes a slide show slower in 3 steps.  
5: Inverts a photo.  
a: Reflects a photo.  
2: Rotates a photo counterclockwise.  
3: Rotates a photo clockwise.  
ZOOM: Zooms in/out a photo (zoom in/out: 3 steps each).  
5/a/2/3: Pans in zoom mode when a photo is larger  
than the screen.  
5 Select the file you want to play back, then press  
ENTER.  
When a video file is selected, playback starts.  
When a music file is selected, status screen is displayed  
and playback starts.  
When a photo file is selected, slide show starts.  
Hint  
– To enjoy slide show with music, press HOME to  
return to the HOME menu screen while music is  
played back, and select photo file.  
Note  
– The displayed file may not be played back  
depending on the content.  
21 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using network services  
You can enjoy multimedia contents (such as photos and videos) using the following network services.  
– Dropbox  
– Picasa Web Albums  
– VUDU  
– YouTube  
Notes  
– Access to content provided by third parties requires a high speed internet connection and may also require account  
registration and a paid subscription.  
– Third party content services may be changed, suspended, interrupted, or discontinued at any time without notice,  
and Yamaha disclaims any liability in connection with such occurrences.  
– Some content may only be available for specific countries and may be presented in specific languages.  
– Yamaha does not represent or warrant that content services will continue to be provided or available for a  
particular period of time, and any such warranty, express or implied, is disclaimed.  
1 Press HOME to move to HOME menu screen.  
4 Press 2/3/5/a to select an item, then press ENTER  
to confirm the selection (or start playback).  
Hints  
Hint  
– To directly move to the VUDU menu screen, press  
vudu.  
– To exit from each network service, press HOME.  
– To directly move to the YouTube menu screen, press  
YouTube.  
Note  
2 Press 5/a to select Network Services, then press  
ENTER.  
– Operation procedures after step 4 vary depending on  
the menu items provided by each service.  
3 Press 2/3/5/a to select the desired network service,  
then press ENTER.  
Available network services vary depending on the  
region.  
22 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using network services  
About Dropbox™  
Dropbox is a network service that allows you to put your  
stuff in Dropbox and get it from your computers, phones,  
or tablets. Automatically add photos and show off video  
from anywhere.  
3
Dropbox is a trademark of Dropbox Inc.  
About Picasa™ Web Albums  
Picasa Web Albums is a network service that allows users  
to share photos with friends and family, or explorer public  
photos.  
More information at picasaweb.google.com  
Picasa and the Picasa logo are trademarks of Google. Inc.  
About VUDU™  
VUDU is an online streaming movie service that allows  
you to rent or purchase individual movies or TV shows in  
either standard definition or high definition without a  
subscription,  
Note  
– To deactivate the VUDU service, refer to “VUDU”  
About YouTube™  
YouTube is a network service that allows users to  
discover, watch and share originally-created videos over  
the Internet.  
YouTube and the YouTube logo are trademarks of  
Google. Inc.  
23 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
®
Enjoying music via Bluetooth  
You can enjoy music played on a Bluetooth device (smartphone, etc.) on this Player.  
AV receiver  
This Player  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
Bluetooth device  
(smartphone, etc.)  
Pairing a Bluetooth device with  
Hints  
this Player  
When establishing a connecting between a Bluetooth  
device and this Player for the first time, follow the  
procedure below to perform “pairing”.  
– “Pairing” is necessary for each Bluetooth device you  
use.  
– Use a Bluetooth device within 10 meters (33 ft) of  
this Player.  
– See also the owner’s manual of your Bluetooth  
device.  
Notes  
– Up to eight Bluetooth devices can be pairing with  
this Player. If the ninth device is paired, the oldest  
pairing information is deleted.  
– If any Bluetooth device is already connected to this  
Player, terminate the Bluetooth connection before  
performing pairing with a new device.  
Bluetooth  
Bluetooth is a technology for wireless communication between  
devices within an area of about 10 meters (33 ft) employing the  
2.4 GHz frequency band, a band which can be used without a  
license.  
– When using Bluetooth, you cannot operate the disc  
tray or playback of other sources.  
Handling Bluetooth communications  
– The 2.4 GHz band used by Bluetooth compatible devices is a  
radio band shared by many types of equipment. While  
Bluetooth compatible devices use a technology minimizing the  
influence of other components using the same radio band, such  
influence may reduce the speed or distance of communications  
and in some cases interrupt communications.  
– The speed of signal transfer and the distance at which  
communications is possible differs according to the distance  
between the communicating devices, the presence of obstacles,  
radio wave conditions and type of equipment.  
1 If playback of other source is ongoing, stop the  
playback.  
2 Press Bluetooth to select Bluetooth as the input  
source.  
3 Press RED to switch this Player to the pairing mode.  
4 Turn on your Bluetooth device to be paired, then  
perform the pairing operation.  
– Yamaha does not guarantee all wireless connections between  
this unit and devices compatible with Bluetooth function.  
For details on pairing operation, refer to the owner’s  
manual of your Bluetooth device.  
5 In the device list on your Bluetooth device, select “BD-  
A1040 Yamaha”.  
If pass key (PIN) is required, enter the number “0000”.  
PIN 0 0 0 0  
1
4
7
2
5
8
0
3
6
9
BD-A1040 Yamaha  
When pairing is completed successfully, “SUCCESS”  
appears on the front panel display (“Pairing Success”  
appears on the TV screen).  
If pairing failed, “FAILED” appears on the front panel  
display (“Pairing Failed” appears on the TV screen).  
24 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Enjoying music via Bluetooth®  
Playing back Bluetooth device  
contents  
Notes  
– If any Bluetooth device is already connected to this  
Player, terminate the Bluetooth connection before  
connecting to another Bluetooth device.  
– When using Bluetooth, you cannot operate the disc  
tray or playback of other sources.  
3
1 If playback of other source is ongoing, stop the  
playback.  
2 Press Bluetooth to select Bluetooth as the input  
source, then turn on your Bluetooth device.  
A connection between the Bluetooth device and this  
Player will be made.  
3 On the Bluetooth device, start playback of the desired  
content.  
As necessary, adjust the volume level of the Bluetooth  
device.  
4 To terminate the Bluetooth connection, press  
Bluetooth.  
Hint  
– You can also exit from Bluetooth by pressing  
HOME or RETURN.  
– In case a connection between your Bluetooth device  
and this Player cannot be made, select “BD-A1040  
Yamaha” in the device list on your Bluetooth device.  
– The Bluetooth connection is automatically  
terminated if the Bluetooth device or this Player is  
turned off.  
25 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Enjoying smartphone pictures and videos  
on the TV screen (Miracast™)  
Miracast is a solution for seamlessly displaying video between devices, without cables or a network connection via an  
access point (Wi-Fi Direct). You can do things like view pictures from a Miracast-compatible device (smartphone, etc.)  
on the screen of the TV connected to this Player.  
Notes  
– To check if your device is Miracast compliant, refer to the owner’s manual of the device.  
– When Miracast is enabled on this Player, other network functions (such as DLNA) are not available.  
– When using Miracast, you cannot operate the disc tray or playback of other sources.  
1 If playback of other source is ongoing, stop the  
playback.  
2 Press MIRACAST.  
PURE DIRECT  
SA-CD  
USB  
5
V
0
.
5
A
3 Within 60 seconds, operate your smartphone to enable  
Miracast and select this Player as the device to be  
This Player  
connected.  
TV  
For details on operations of your smartphone, refer to  
the owner’s manual of it.  
4 To exit from Miracast, press MIRACAST.  
Miracast-compatible  
device  
Hint  
(smartphone, etc.)  
– You can also exit from Miracast by pressing HOME  
or RETURN.  
Depending on the environment, audio/video may be interrupted or noise may appear on the TV screen. In this case,  
try the following solutions.  
– Move the Miracast device closer to this Player.  
– Turn off other wireless devices not in use.  
– Move the Miracast device and this Player away from microwave ovens, Bluetooth devices or other wireless  
devices.  
Operating this Player from mobile devices (AV CONTROLLER)  
By using the application “AV CONTROLLER” on your mobile device, you can use the mobile device as a remote  
control and operate this Player from it.  
AV CONTROLLER  
– You can control the basic functions of Yamaha Blu-ray Disc™ players such as Play, Pause, Skip, Power and  
cursor navigations.  
– The application “AV CONTROLLER” is available in many languages.  
– For more information about “AV CONTROLLER”, visit the Yamaha website.  
26 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Advanced playback operation  
This chapter explains playback of commercially available  
Blu-ray Discs, DVDs, SA-CDs, CDs, and recorded DVD-  
RW/R discs.  
DVD  
– Normal  
– Shuffle CH (chapter)  
– Shuffle TT (title)  
– Shuffle All  
Note  
– Random CH (chapter)  
– Random TT (title)  
– Random All  
3
– For the basic playback operation, see page 8.  
On Screen menu  
To display On Screen menu, press ON SCREEN. After  
that, press 5/a/2/3 to select an item, then press ENTER  
to operate the desired function.  
VIDEO MUSIC PHOTO  
– Normal  
– Shuffle F (folder)  
– Random F (folder)  
Audio  
: Shows audio language/  
BD DVD VIDEO  
signal of a Blu-ray Disc/DVD currently selected. You can  
select the desired type of audio.  
Angle  
: Shows the currently-selected angle  
BD DVD  
number. If the video is recorded with multiple angles, you  
can change the angle.  
Subtitle  
: Shows the currently-  
BD DVD VIDEO  
selected subtitle language when the subtitle is provided.  
Subtitle Style : Shows the currently-selected  
BD  
On Screen menu contains following items.  
subtitle style. This function is available only for Video-file  
external subtitle. You can select the desired text style of  
subtitle.  
Title  
: Shows the title number being  
BD DVD VIDEO  
played back. You can skip to the desired title by selecting  
it from this item.  
Bitrate  
: Shows  
BD DVD CD VIDEO MUSIC  
bitrate of the audio/video signal.  
Chapter  
: Shows the chapter  
BD DVD VIDEO  
number being played back. You can skip to the desired  
chapter by selecting it from this item.  
Second Video  
: Turns the PIP on/off (p. 8).  
BD  
BD  
Second Audio  
: Turns the secondary audio on/off  
Track/File  
: Shows  
CD VIDEO MUSIC PHOTO  
track/file number being played back. You can skip to the  
desired track/file by selecting it from this item.  
Ins Search  
: Skips 30 seconds.  
: Replays the content  
BD DVD CD VIDEO MUSIC  
Time  
: Shows the  
BD DVD CD VIDEO MUSIC  
playback time. Select display type from the following:  
– Elapsed playback time of the title, chapter, disc,  
track or file  
Ins Replay  
BD DVD CD VIDEO MUSIC  
from 10 seconds before.  
– Remaining playback time of the title, chapter, disc,  
track or file  
CC Select  
BD DVD VIDEO  
: Sets the displayed closed caption.  
Mode/Play Mode  
DVD CD VIDEO MUSIC PHOTO  
playback mode. You can select playback mode from the  
following:  
: Shows current  
Slide Show  
:
PHOTO  
Shows slide show speed. You can select the slide show  
speed from Slow/Medium/Fast.  
CD  
– Normal: Normal playback.  
– Shuffle: Random playback without repetition.  
– Random: Random playback with repetition.  
Transition  
: Shows how photo appears on the  
PHOTO  
screen. You can select the transition type.  
Code Page : Selects character code of subtitle  
VIDEO  
you added to DivX video (p. 47).  
27 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                         
Advanced playback operation  
Status menu  
DVD CD MUSIC  
This shows various settings, such as subtitles, angle  
settings and the title/chapter/track number currently  
played back. To display status menu, press STATUS.  
Status menu contains following menus.  
Example: Icons when playing a music file  
BD DVD VIDEO  
Example: Icons when playing a Blu-ray Disc  
1
2
3
4
5
6 7  
8
1
2
3
(Playback status)  
(Disc type/video file icon)  
1
2
(Playback status)  
(Title number being played): You can jump to  
specified title with SEARCH button (p. 9).  
(Repeat mode): Shows current repeat mode (p. 8).  
4
(Chapter number being played)  
:
BD DVD  
3
(Disc type/music file icon)  
You can jump to specified chapter with SEARCH  
4 (Artwork)  
: Displays artwork if the file  
MUSIC  
contains it.  
(Track/file number being played)  
You can jump to specified track with SEARCH button  
(p. 9).  
:
VIDEO  
5
(Track/file number being played): You can  
jump to specified track with SEARCH button (p. 9).  
6 (Information)  
: Displays music information  
MUSIC  
5
(Elapsed playback time): You can jump to  
specified point with SEARCH button (p. 9).  
if the file contains them.  
7
(Elapsed playback time): You can jump to  
specified point with SEARCH button (p. 9).  
6
7
(Repeat mode): Shows current repeat mode (p. 8).  
(Audio currently selected): You can change the  
audio language or format with AUDIO button.  
8 (Progress bar)  
: Shows progress status of  
MUSIC  
current song.  
8
(Subtitle currently selected): You can change  
the subtitle language with SUBTITLE button.  
PHOTO  
1
2
3
4
5
1
2
(Playback status)  
(Photo file icon)  
3
4
(File number being displayed)  
(Repeat mode): Shows current repeat mode (p. 8).  
5 (Slide show speed)  
28 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced playback operation  
Program play DVD CD  
This allows you to program playback order of audio disc  
tracks or DVD chapters.  
Press PROGRAM during playback to display the  
PROGRAM window to program playback order.  
You can program up to 15 tracks/chapters.  
Using Search  
BD DVD CD VIDEO MUSIC PHOTO  
This allows you to jump to the specified point during  
playback.  
1 Press SEARCH during playback. Status bar appears.  
2 Press 5/a/2/3 to select one of the item below, then  
press ENTER.  
Example: Programming the playback order of CD tracks  
1 Press PROGRAM during playback.  
3
:
BD DVD  
– Title number (shown as  
)
– Chapter number (shown as  
)
– Elapsed title time (shown as  
)
– Elapsed chapter time (shown as  
)
:
CD  
– Track number (shown as  
)
– Elapsed track time (shown as  
– Elapsed disc time (shown as  
)
)
:
VIDEO MUSIC  
2 Press ENTER to program playback order.  
For audio disc, press 5/a to select a desired track then  
press ENTER.  
– File number (shown as  
)
– Chapter number (shown as  
)
)
– Elapsed file time (shown as  
For DVD-Video disc, select a desired title (shown as  
TT) and chapter (shown as CH) instead of a track.  
To clear a set track, select the track you want to clear,  
then press CLEAR.  
:
PHOTO  
– File number (shown as  
)
3 Press 5/a or number buttons to set/adjust the value of  
the focused item, and press ENTER to jump to the  
specified point.  
Press RETURN to cancel the Program play.  
4 To close the status bar, press STATUS.  
Enjoying BONUSVIEW™ and BD-  
Live™  
Profile 1 Version 1.1) and BD-Live (p. 47) (BD-ROM  
Profile 2) playback functions.  
Note  
– Functions and playback method vary depending on  
the disc. See the guidance on the disc or the supplied  
user’s manual.  
3 After programming is finished, press  
to set and  
start program playback.  
4 To cancel program play, stop playback completely by  
pressing  
.
29 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Advanced playback operation  
Using Picture in Picture function  
Notes  
(secondary audio/video playback)  
– Yamaha cannot guarantee that all brands’ USB  
memory devices will operate with this Player.  
– Do not use a USB extension cable when connecting  
a USB memory device to the USB connector of the  
Player. Using a USB extension cable may prevent  
the Player from performing correctly.  
BD-Video that includes secondary audio and video  
compatible with Picture in Picture can be played back  
with secondary audio and video simultaneously as a small  
video in the corner.  
Primary video  
Secondary video  
3. Play back the disc.  
4. Run BD-Live according to the  
instructions on the disc.  
Notes  
– Do not remove the USB memory device or disconnect  
unplug the power cable during BD-Live operations.  
– Regarding playback method of BD-Live contents,  
etc., perform the operations in accordance with the  
instructions in the Blu-ray Disc manual.  
While PIP Mark (  
) or Secondary  
Audio Mark (  
) is displayed, press  
PIP to turn the Picture in Picture  
function on/off.  
– To enjoy BD-Live functions, perform the network  
connection (p. 15) and Network settings (p. 36).  
setup to restrict access to BD-Live contents.  
– The time required to download the provided programs  
into the USB memory device connected to this Player  
varies depending on the internet connection speeds  
and the data volume of the programs.  
Notes  
– To listen to secondary audio, make sure that the  
Audio Output setting (Coaxial / Optical or HDMI) is  
set to PCM or Reencode (p. 38).  
– Depending on the disc, to listen to secondary audio,  
you may need to set secondary audio to on from the  
top menu of the disc (p. 9).  
– BD-Live programs provided through the internet  
may not be able to display the connection depending  
on the status (upgrading) of the provider. In such  
cases, take out the disc and try again.  
– The secondary audio and video for Picture in Picture  
may automatically play back and be removed  
depending on the content. Also, playable areas may  
be restricted.  
– If the BD-Live screen does not appear for a while  
after you select the BD-Live function in the Blu-ray  
Disc menu, the USB memory device may not have  
enough free space. In such cases, eject the disc from  
the Player, and then erase the data in the USB  
memory device using the “Format” menu in the  
“Local Storage” (p. 34).  
Using the feature of BD-Live™  
1. Set the Network setting (p. 36).  
2. Connect the USB memory device  
BD-Live data is saved in a USB memory device  
connected to this Player. To enjoy these functions,  
connect a USB memory device supporting USB 2.0  
High Speed (480 Mbit/s) to one of the USB  
connectors (front/rear) of this Player to use the USB  
memory device as Local Storage.  
– Local Storage is used as an auxiliary memory when  
Blu-ray Disc is played back.  
– Use a USB memory device with at least 2GB of free  
space.  
– BUDA folder is created automatically in the USB  
memory device when necessary.  
– If there is insufficient storage space, the data will not  
be copied/downloaded. Delete unneeded data or use  
a new USB memory device.  
– Some time may be required for the data to load  
(read/write).  
30 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
SETTINGS  
SETUP menu  
The SETUP menu enables various audio/visual settings and adjustments for functions using the remote control unit.  
Menu/Submenu  
System  
Item  
Function  
Page  
Auto Power  
Standby  
Sets the power-saving function to on/off.  
HDMI Control  
Load Default  
Upgrade  
Sets this Player to receive control signal from the remote  
control of your TV/AV receiver.  
General Setting  
Resets all settings to the default setting except Security  
setting.  
4
Performs upgrade of this Player.  
Upgrade  
Notification  
Selects whether to display the message on the screen when  
this Player detects newer software over the Internet.  
3D Playback  
Message  
Displays a warning message concerning 3D video playback  
when this Player is turned on.  
Local Storage  
Displays the free space of USB memory device connected to  
this Player, or formats the “BUDA” folder in the USB  
memory device.  
Easy Setup  
OSD  
Sets language, resolution, screen aspect ratio.  
Selects the language for On Screen Display.  
Prioritizes the language for disc menu.  
Prioritizes the language for audio.  
Language  
Playback  
Menu  
Audio  
Subtitle  
Prioritizes the language for subtitle.  
Disc Auto Playback Sets this Player to start disc playback automatically.  
Angle Mark  
Sets to display the Angle Mark when Blu-ray Disc/DVD with  
multiple angles is played back.  
PIP Mark  
Sets to display the PIP Mark when Blu-ray Disc/DVD with  
Picture in Picture is played back.  
Secondary Audio  
Mark  
Sets to display the Secondary Audio Mark when Blu-ray  
Disc/DVD with secondary audio is played back.  
Last Memory  
Sets this Player to remember the last playback position of a  
disc (Blu-ray or DVD video) when it is set to standby mode  
or the disc tray is opened.  
DivX(R) VOD  
DRM  
Displays registration code for DivX(R) video.  
DivX Subtitle  
DVD-Audio Mode  
VUDU  
Selects whether to display a subtitle for DivX(R) video.  
Selects the playback mode for DVD-Audio discs.  
Deactivates this Player from VUDU service.  
Changes password for Parental Control and Country Code.  
Sets the Parental Control depending on the disc content.  
Sets your Country Code.  
Security  
Network  
Change Password  
Parental Control  
Country Code  
Connection setting  
Information  
Sets a network connection method.  
Displays network information screen.  
Connection Test  
IP Setting  
Performs the network connection test.  
Sets the IP setting to Auto/Manual.  
Proxy Setting  
Network Control  
Sets the proxy setting.  
Sets the control for devices, which are connected via  
Ethernet, to On/Off.  
Network Standby  
DMC Control  
Selects whether this Player can be turned on from other  
network devices.  
Selects whether to allow DLNA-compatible Digital Media  
Controller (DMC) (p. 16) to control this Player.  
BD-Live  
Connection  
Sets the BD-Live connection to Permitted/Partial Permitted/  
Prohibited.  
31 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP menu  
Menu/Submenu  
Item  
3D Output  
Function  
Page  
TV  
Selects 3D or 2D videos.  
TV Screen  
Sets the screen aspect ratio of the connected TV, and adjust  
the video output.  
HDMI Resolution  
TV System  
Selects the HDMI video output resolution.  
Display Setting  
Selects the TV System from NTSC/PAL/Multi.  
Color Space  
Selects Color Space from YCbCr 4:4:4/YCbCr 4:2:2/Full  
RGB/RGB.  
HDMI Deep Color  
HDMI 1080p 24Hz  
Noise Reduction  
Selects HDMI Deep Color from 30 bits/36 bits/48 bits/Off.  
Sets HDMI 1080p 24Hz to auto/off.  
Video Process  
Closed Caption  
Sets the level of Noise Reduction.  
De-interlacing  
Mode  
Sets how to detect the video signal.  
CC Attribute  
Sets the appearance of closed captions.  
Font color  
Font size  
Customize the font, background and window used for closed  
captions when CC Attribute is set to Custom.  
Font style  
Font opacity  
Font edge  
Font edge color  
BG color  
BG opacity  
Window color  
Window opacity  
Audio Output  
Coaxial / Optical  
Selects the output mode of COAXIAL jack/OPTICAL  
terminal from Bitstream/PCM/Reencode/Off.  
HDMI  
Selects the output mode of HDMI terminal from Bitstream/  
PCM/Reencode/Off.  
Audio Setting  
Downsampling  
Selects the digital audio signal down sampling frequency  
from 48K/96K/192K.  
DRC  
Sets the DRC (Dynamic Range Compression).  
SACD Output  
Output Priority  
Selects output priority for playing back SA-CDs from HDMI  
or Analog.  
SACD Priority  
HDMI Output  
Selects the playing back priority for 2-channel contents or  
multi-channel contents, when the disc contains both types of  
contents.  
Selects the output mode of HDMI terminal from DSD or  
PCM when SA-CD is played back.  
Speaker Setting  
Post Process  
2ch Downmix  
UpMix  
Sets the audio output from AUDIO OUT L/R jack.  
Multi-channelizes the 2-channel audio signal.  
Displays software version and MAC address (p. 48).  
System  
Information  
32 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP menu  
Example of SETUP menu  
4. Select a desired setting.  
Press 5/a to select On or Off, then press ENTER.  
operation  
You need to call up the SETUP menu screen to perform  
settings for this Player. The following is the explanation  
for basic operations of the SETUP menu.  
4
TOP MENU  
POP-UP MENU  
Hint  
– You need to use the number buttons to enter  
numbers (such as password) for some menu items.  
ENTER  
5. Exit the menu screen.  
RETURN  
ON SCREEN  
Press 2 to return to the previous menu.  
SETUP  
STATUS  
Example: Setting Disc Auto Playback  
Note  
– Some items cannot be set during playback. In this  
case, press  
setting.  
to stop playback completely before  
1. Display the SETUP menu screen.  
Press SETUP to display the SETUP menu screen.  
Press 2/3 to select General Setting, then press  
ENTER or a.  
2. Select a Submenu.  
Press 5/a to select Playback, then press ENTER or  
cursor 3.  
3. Select a menu item.  
Press 5/a to select Disc Auto Playback, then press  
ENTER or cursor 3.  
33 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP menu  
Load Default  
General Setting  
You can reset all settings of this Player to default setting  
except Security setting (p. 35). For details on default  
settings, see pages 31–39.  
Upgrade  
The default settings are marked with “ * ”.  
You can upgrade the software manually from USB  
Storage or Network. For details on software upgrade, refer  
System  
Auto Power Standby  
Sets the power-saving function to on/off.  
When set to on, this Player will switch to screen saver  
mode if there is no operation for 5 minutes. After that, this  
Player will turn to standby mode when there is no  
operation for 15 minutes.  
Upgrade Notification  
You can select whether to display the message on the  
screen when this Player detects newer software over the  
Internet.  
*
On , Off  
3D Playback Message  
*
On , Off  
You can turn on or off a warning message concerning 3D  
video playback that appears on the TV when this Player is  
turned on.  
HDMI Control  
You can set the Player to receive control signal from a  
TV/AV receiver compatible with the HDMI Control  
function via an HDMI cable (p. 12).  
*
On , Off  
Local Storage  
*
On, Off  
You can check the free space of USB memory device  
connected to this Player, or format (empty) the “BUDA”  
folder in the USB memory device connected to this Player  
by selecting Format.  
Using HDMI Control function  
Using the HDMI Control function, you can interactively  
operate this Player with your TV (HDMI Control  
function supported).  
When you connect this Player to the TV compatible with  
the HDMI Control function using an HDMI cable and  
set HDMI Control in the SETUP menu to on (p. 34), you  
can perform the function listed below.  
Hint  
– To enjoy the BD-Live feature (p. 30), you need to  
connect a USB memory device (with at least 2GB of  
free space) to one of the USB connectors (front/rear)  
of this Player to use the USB memory device as  
Local Storage.  
• Automatic input select function  
When you start playback of this Player, the input  
selector of the TV (and an AV receiver if this Player is  
connected to the TV via the AV receiver) is switched  
to this Player automatically. TV Power is turned on  
automatically depending on the TV.  
Easy Setup  
You can perform Easy Setup (p. 19).  
Language  
OSD  
You can select the language for On Screen Display which  
is the messages or menu displayed on the screen such as  
SETUP menu.  
• Automatic power off function  
When you turn off the TV while this Player is in stop  
mode and the SETUP menu screen is not displayed,  
the power of this Player is also turned off  
automatically.  
English, Français, Español, Deutsch, Italiano, Svenska,  
Nederlandse, Polski, Pyccкий, 中文  
Notes  
– HDMI Control function may not work properly  
depending on the TV.  
Menu  
You can prioritize the language for disc menu.  
– Functions other than ones shown above may work  
depending on the TV or AV receiver.  
– In order to make the HDMI Control function  
available, set up settings for the HDMI Control  
function on ALL components (this Player, TV,  
and AV receiver). Certain operation may also be  
required.  
– Each function may be set independently to  
activate/deactivate depending on the TV.  
– Refer to the operation manuals supplied with the  
TV and/or AV receiver for details regarding setup.  
– When set to on, power consumption during  
standby mode increases due to HDMI Control  
function.  
English, Français, 中文 , Español, Deutsch, Italiano,  
Nederlandse, Portuguese, Danish, Svenska, Finnish,  
Norwegian, Polski, Pyccкий, Korean, Japanese, More  
Audio  
You can prioritize the audio language for Blu-ray Disc/  
DVD playback. For details on setting items, see “Menu”  
34 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                     
SETUP menu  
Subtitle  
DVD-Audio Mode  
You can prioritize the language for Subtitle.  
You can select the playback mode for DVD-Audio discs.  
DVD-AUDIO* Enables playback of DVD-Audio contents as well as  
English, Français, 中文 , Español, Deutsch, Italiano,  
Nederlandse, Portuguese, Danish, Svenska, Finnish,  
Norwegian, Polski, Pyccкий, Korean, Japanese, More, Off  
DVD-Video contents.  
DVD-VIDEO Disables playback of DVD-Audio contents so that  
only DVD-Video contents can be played back.  
(The default settings in [Language] differ depending on  
your model.)  
Notes  
– This setting is only available when no disc is loaded.  
– Some DVD-Audio titles contain DVD-Video  
contents which can be accessible only when this  
Player is in the DVD-Video mode.  
Playback  
Disc Auto Playback  
You can set Disc Auto Playback to on/off. When set to on,  
a disc will play back automatically after loading.  
4
VUDU  
*
On , Off  
You can deactivate this Player from VUDU service  
Angle Mark  
You can set to display the Angle Mark (  
) when  
Blu-ray Disc/DVD with multiple angles is played back.  
Security  
Change Password  
*
On , Off  
You can set the password for changing the Parental  
Control Level and Country Code. Refer to “Parental  
PIP Mark  
You can set to display the PIP Mark (  
Disc with picture in picture (p. 30) is played back.  
) when Blu-ray  
*
On , Off  
Notes  
Secondary Audio Mark  
You can set to display the Secondary Audio Mark (  
when Blu-ray Disc with secondary audio is played back.  
– The default password is 0000.  
– If you forget the password, refer to  
“Troubleshooting” (p. 43) and set all the Security  
settings to their default settings.  
)
*
On , Off  
Parental Control  
Last Memory  
In some Blu-ray Discs/DVDs, a control level for disc  
viewing is set depending on the age of the viewer. You  
can set the Parental Control shown on the screen  
depending on the disc content.  
be entered before the Parental Control Levels is set.  
After you set the Parental Control, when you play back a  
disc with level higher than current Parental Control Level,  
or you want to change the Parental Control Level, a dialog  
box will pop up to ask you to enter the password.  
You can set whether this Player remembers the last  
playback position of a disc (Blu-ray or DVD video) when  
it is set to standby mode or the disc tray is opened.  
*
On , Off  
Note  
– Some discs are not compatible with this function.  
DivX(R) VOD DRM  
You can display registration code for DivX(R) video.  
Off*, 1–8  
Country Code  
DivX Subtitle  
You can set the Country Code you live in. The password  
(see “Change Password” on p. 35) needs to be entered  
before the Country Code is set. This setting may be used  
for rating of Parental Control and disc playback.  
You can select whether to display a subtitle for DivX(R)  
video.  
*
On, Off  
35 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                       
SETUP menu  
Proxy Setting  
You can set Proxy Setting. Set to Disable for normal use.  
Set to Enable to set the proxy setting.  
Network  
Connection setting  
*
Sets proxy server to disable. Select this item when  
proxy server is not used.  
Disable  
You can select a network connection method.  
Wired*  
Connects the network using Ethernet.  
Enable  
Enables proxy host and proxy port setting.  
Sets proxy host.  
Wireless  
Connects the network using a wireless LAN.  
You can select settings for a wireless LAN  
connection. Follow the on-screen instructions to  
proceed.  
Proxy Host  
Proxy Port  
Sets proxy port.  
Network Control  
Scan  
Sets the control for devices, which are connected via  
Ethernet, to On/Off. When On with filter is selected, you  
can specify the MAC addresses of the network devices  
that will be permitted access to this Player. This Player  
employs Yamaha Network Control protocol (YNC).  
Searches for an access point. You can connect the  
access point that is found.  
Manual  
You can manually set information for an access  
point.  
*
On , On with filter, Off  
Auto  
If your access point supports the WPS (Wi-Fi  
Protected Setup) function, you can use the auto setup  
method to connect this Player to the access point  
without entering information manually. Select PBC  
(Push Button Configuration) or PIN code method.  
Notes  
– When Network Control is enable, power  
consumption during standby mode increases due to  
network control function.  
Information  
– When set to On, the system startup time is  
decreased.  
You can display network information screen. On this  
screen, you can view the information of Interface  
(Ethernet), Address Type, IP Address, Subnet Mask,  
Default Gateway, and DNS.  
Network Standby  
You can select whether this Player can be turned on from  
other network devices such as “AV CONTROLLER”  
Connection Test  
You can perform an internet connection test. If the test is  
failed, please check “IP Setting” (p. 36) and perform the  
test again.  
*
On, Off  
Note  
IP Setting  
– This setting is available only when Network Control  
is enabled.  
You can configure the network settings.  
Auto*  
Select to automatically configure the network  
settings of this Player with the DHCP server.  
DMC Control  
You can select whether to allow DLNA-compatible  
Digital Media Controller (DMC) (p. 16) to control this  
Player.  
Manual  
Select to configure the network settings (IP Address,  
Subnet Mask, Default Gateway, and DNS) manually.  
*
Enable , Disable  
Hints  
BD-Live Connection  
You can set access restriction to BD-Live contents.  
Numeric keys Enters characters.  
2/3  
Moves the highlight.  
Deletes a character.  
Saves the settings and exits from  
the menu.  
CLEAR  
ENTER  
Permitted  
Allows all BD-Live discs to connect the network.  
Allows only discs with owner certification.  
Partial  
*
Permitted  
Prohibited  
Prohibits all BD-Live discs to connect the network.  
36 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                         
SETUP menu  
HDMI Resolution  
Display Setting  
You can select the HDMI video output resolution. For  
more details on output formats, refer to “About the HDMI  
video output formats” (p. 41).  
When set to Auto, resolution is set to the maximum  
resolution according to the connected TV.  
The default settings are marked with “ * ”.  
When set to Disc Native, the original resolution and video  
frequency, recorded in the Blu-ray Disc or DVD that is  
played back, are used. You can use a video up-converter  
function of an external device.  
When other than a Blu-ray Disc or DVD is played back,  
the resolution and video frequency will work as Auto.  
If a Blu-ray Disc or DVD whose resolution and video  
frequency are not compatible with the connected TV, no  
image will be output. In this case, stop playback, and  
select an option other than Disc Native.  
TV  
3D Output  
You can select 3D or 2D video output from this Player.  
Auto*  
Off  
This Player automatically selects 3D or 2D videos.  
This Player always selects 2D videos.  
4
Note  
*
– Even if you set “3D Output” to “Auto” and play  
back a Blu-ray 3D Disc, this Player selects 2D  
images depending on the setting of TV, etc.  
Auto , Disc Native, 480i/576i, 480p/576p, 720p, 1080i, 1080p  
Note  
TV Screen  
You can set the screen aspect ratio of the connected TV,  
and adjust the video output.  
If you switch your TV (i.e. because you have bought a  
new one) and the screen aspect ratio of the connected TV  
changes, you will have to change the TV Screen setting.  
– To output HD audio (Dolby TrueHD or DTS-HD  
Master Audio) from HDMI terminal, set HDMI  
Resolution to Auto or more than 720p.  
TV System  
You can select TV System from PAL, NTSC and Multi.  
Set the same TV System as your TV set. For more details  
16:9 Full  
Select this when this Player is connected to a TV  
with a 16:9 screen. When a 4:3 aspect ratio video is  
played back, the video is displayed as shown below.  
*
NTSC, PAL, Multi  
(The default setting differs depending on your model.)  
Select this when this Player is connected to a TV  
with a 16:9 screen. When a 4:3 aspect ratio video is  
played back, the video is displayed as shown below.  
16:9 Normal  
Color Space  
4:3 Pan Scan Select this when this Player is connected to a TV  
with a 4:3 screen. When a 16:9 aspect ratio video is  
played back, the video is displayed as shown below.  
You can select the Color Space (p. 47) output from  
HDMI. This function is available when this Player is  
connected with an HDMI cable.  
4:3 Letter BoxSelect this when this Player is connected to a TV  
with a 4:3 screen. When a 16:9 aspect ratio video is  
played back, the video is displayed as shown below.  
*
Sets Color Space to YCbCr 4:4:4.  
YCbCr 4:4:4  
YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.  
Full RGB  
When RGB is set and white and black on the screen  
On 16:9 (wide screen) TV  
16:9 Full 16:9 Normal  
Original  
image size  
are too faint, select this item. This setting is effective  
when a connected component supports RGB 0–255  
range.  
RGB  
Outputs video signal at normal signal range.  
Note  
4:3  
– This function is only available on TVs that support  
this function.  
On 4:3 TV  
4:3 Pan Scan 4:3 Letter Box  
Original  
image size  
HDMI Deep Color  
When your TV and/or AV receiver is compatible with  
Deep Color (p. 47), set this item according to your TV/AV  
receiver. This function is available when this Player is  
connected with an HDMI cable.  
16:9  
*
30 bits, 36 bits, 48 bits, Off  
37 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                             
SETUP menu  
HDMI 1080p 24Hz  
Audio Setting  
This outputs the BD-Video encoded in 24Hz frame rate in  
HDMI 1080p 24Hz. Smoother video playback may be  
available with this function. This function is available  
when your TV/AV receiver support this function. For  
more details on output formats, refer to “About the HDMI  
The default settings are marked with “ * ”.  
*
Auto , Off  
Audio Output  
Coaxial / Optical  
Note  
You can select the output mode of COAXIAL jack and  
OPTICAL terminal. For more details on output formats,  
– This setting is disabled when output resolution is  
other than 1080p.  
Bitstream  
Outputs digital signal without any processing.  
Secondary Audio is not output.  
Video Process  
Noise Reduction  
You can set the Noise Reduction to a level of 0 to 3. 0 is  
off, and 3 is the maximum level.  
PCM  
Outputs 2-channel PCM.  
Outputs Bitstream with Secondary Audio.  
Mutes sound.  
*
Reencode  
Off  
HDMI  
*
0, 1, 2 , 3  
You can select the output mode of HDMI terminal. For  
details on setting items, see “Coaxial / Optical” (p. 38). For  
more details on output formats, refer to “About the audio  
De-interlacing Mode  
You can select how to detect the video signal. Set to Auto  
for normal use. When horizontal stripping noise appears  
on the screen, set this to Film/Video to remove the noise.  
*
Bitstream , PCM, Reencode, Off  
*
Auto , Film, Video  
Note  
Closed Caption  
– To output HD audio (Dolby TrueHD or DTS-HD  
Master Audio) from HDMI terminal, set HDMI  
Resolution to Auto or more than 720p (p. 37).  
CC Attribute  
You can set the appearance of closed captions. When Auto  
is selected, digital closed captions will be displayed in  
default settings. When Custom is selected, you can  
customize the appearance of closed captions (Font color,  
Font size, etc.) manually.  
Downsampling  
You can select digital audio signal down-sample  
frequency. This function is effective for the audio signal  
output from the COAXIAL jack/OPTICAL terminal.  
Auto, Custom  
*
The highest sampling rate of digital PCM output is  
48 kHz.  
48K  
Font color, Font size, Font style,  
Font opacity, Font edge, Font edge color,  
BG color, BG opacity, Window color,  
Window opacity  
Customize the font, background and window used for  
closed captions when CC Attribute is set to Custom.  
96K  
The highest sampling rate of digital PCM output is  
96 kHz.  
192K  
The highest sampling rate of digital PCM output is  
192 kHz.  
DRC  
You can set the DRC (Dynamic Range Compression)  
(p. 47) to on/off/Auto. When set to Auto, DRC is  
automatically turned on for a source with DRC  
information in Dolby TrueHD format. DRC makes the  
strong sound such as plosive sound lower, and  
conversations more audible. It is useful when you watch  
movies in the night.  
*
Off, On, Auto  
38 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                         
SETUP menu  
System Information  
SACD Output  
Output Priority  
You can select the output priority from HDMI or Analog  
for playing back SA-CDs.  
Software version and MAC address (p. 48) are displayed.  
*
The settings for SACD Priority and HDMI Output  
are applied.  
HDMI  
Analog  
Always plays back the SA-CD’s high quality 2-  
channel area. The signal is fully optimized for analog  
2-channel outputs to be best quality.  
4
Note  
– Selecting Analog mutes the HDMI output when SA-  
CD is played back. For details, see “SA-CD output  
SACD Priority  
Selects the playing back priority for 2-channel contents or  
multi-channel contents, when the disc contains both types  
of contents.  
*
Multi-ch , 2-ch  
HDMI Output  
You can select audio signal output from HDMI terminal  
when SA-CD is played back.  
*
Outputs DSD raw signal. When this Player is  
connected to DSD compatible AV receiver, this item  
is recommended.  
DSD  
PCM  
Outputs PCM signal decoded by this Player.  
Speaker Setting  
2ch Downmix  
You can select down mix method to analog 2-ch from  
Stereo or Lt/Rt.  
*
Changes channel output to stereo, which only  
delivers sound from the two front speakers.  
Stereo  
Lt/Rt  
Select this item if this unit is connected to a Dolby  
Pro Logic decoder. Sound from rear speakers is  
mixed to the 2-ch stereo sound.  
Post Process  
UpMix  
You can multi-channelize the 2-channel audio signal. To  
multi-channelize, select DTS NEO:6, then select Cinema  
or Music mode.  
*
Off , DTS NEO:6  
39 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                             
SETUP menu  
About the audio output formats  
HDMI  
COAXIAL / OPTICAL  
Reencode Bitstream PCM Reencode  
MIXED 2CH  
Source format  
Bitstream  
PCM  
with SA or  
PCM 2ch  
PCM 2ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 7.1ch  
Dolby Digital  
Dolby Digital  
Dolby Digital  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Dolby Digital  
Dolby Digital  
Dolby Digital  
2ch  
2ch  
2ch  
2ch  
2ch  
2ch  
*1  
BCS  
PCM 2ch  
without SA or  
*1  
BCS  
with SA or  
*1  
BCS  
PCM 5.1ch  
PCM 7.1ch  
Dolby Digital  
without SA or  
*1  
BCS  
with SA or  
*1  
BCS  
without SA or  
PCM 7.1ch  
PCM 2ch  
PCM 2ch  
*1  
BCS  
with SA or  
*1  
BCS  
PCM up to  
5.1ch  
Dolby Digital  
Dolby Digital Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
2ch  
2ch  
2ch  
without SA or  
*1  
BCS  
with SA or  
*1  
BCS  
Dolby Digital  
Plus  
Dolby Digital  
Plus  
PCM up to  
7.1ch  
Dolby Digital  
PCM 2ch  
PCM 2ch  
without SA or  
Dolby Digital  
*1  
BCS  
Plus  
with SA or  
Dolby Digital  
*1  
BCS  
Dolby  
TrueHD  
Dolby  
TrueHD  
PCM up to  
7.1ch  
Dolby Digital  
without SA or  
Dolby  
*1  
BCS  
TrueHD  
with SA or  
*1  
BCS  
PCM up to  
5.1ch  
*3  
*2  
*3  
*2  
DTS  
DTS  
DTS  
DTS  
DTS  
PCM 2ch  
DTS  
2ch  
*2  
without SA or  
*1  
BCS  
with SA or  
*3  
DTS  
*1  
BCS  
PCM up to  
DTS HD High  
Resolution  
DTS-HDHigh  
Resolution  
*2  
*2  
*3  
*2  
2ch  
PCM 2ch  
DTS  
*2  
7.1ch  
DTS HD High  
Resolution  
without SA or  
*3  
*1  
BCS  
with SA or  
*3  
DTS  
*1  
BCS  
PCM up to  
DTS-HD  
Master Audio  
DTS-HD  
Master Audio  
*3  
*2  
2ch  
DTS  
PCM 2ch  
DTS  
DTS-HD  
Master  
*2  
7.1ch  
without SA or  
*1  
BCS  
*3  
Audio  
*1 “SA” is a Secondary Audio. “BCS” is a button click sound, the sound effect for pop-up menus, etc.  
*2 For USB, DLNA and network services, PCM and mixed 2ch are not available (muted).  
*3 For USB, DLNA and network services, Reencode is not available (output audio will be same format as bitstream).  
Notes  
– When Coaxial / Optical or HDMI is set to Bitstream, secondary audio is not output. (p. 38)  
– To output HD audio (Dolby TrueHD or DTS-HD Master Audio) from HDMI terminal, set HDMI Resolution to  
Auto or more than 720p (p. 37).  
40 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP menu  
SA-CD output formats  
SACD Output settings (p. 39)  
Output Priority SACD Priority HDMI Output  
HDMI  
COAXIAL/OPTICAL  
MIXED 2CH  
DSD  
PCM  
DSD  
PCM  
DSD  
PCM  
DSD  
PCM  
DSD up to 5.1ch  
PCM up to 5.1ch  
DSD 2ch  
No output  
No output  
No output  
No output  
No output  
No output  
No output  
No output  
2ch  
2ch  
2ch  
2ch  
2ch  
2ch  
2ch  
2ch  
Multi-ch  
2-ch  
HDMI  
PCM 2ch  
No output  
Multi-ch  
2-ch  
No output  
Analog  
No output  
4
No output  
About the HDMI video output formats  
When TV System is set to NTSC  
HDMI Resolution  
Contents  
Auto  
Disc Native  
1080p  
1080i  
720p  
480p/576p  
480i/576i  
1080p 24Hz/  
60Hz *3  
BD-Video with  
1080p/24Hz content  
1
1080p 24Hz  
1080i 60Hz  
720p 60Hz  
480p  
480p  
480i  
480i  
*
BD-Video without  
1080p/24Hz content  
1
*
2
*
1080p 60Hz  
1080i 60Hz  
720p 60Hz  
1
2
DVD-Video  
Others  
1080p 60Hz  
1080p 60Hz  
1080i 60Hz  
1080i 60Hz  
720p 60Hz  
720p 60Hz  
480p  
480p  
480i  
480i  
*
*
1
1
*
*
When TV System is set to PAL  
HDMI Resolution  
1080i  
Contents  
Auto  
Disc Native  
1080p  
720p  
480p/576p  
480i/576i  
1080p 24Hz/  
50Hz *3  
BD-Video with  
1080p/24Hz content  
1
1080p 24Hz  
1080i 50Hz  
1080i 50Hz  
720p 50Hz  
576p  
576i  
*
BD-Video without  
1080p/24Hz content  
1
*
2
*
1080p 50Hz  
720p 50Hz  
576p  
576i  
1
2
DVD-Video  
Others  
1080p 50Hz  
1080p 50Hz  
1080i 50Hz  
1080i 50Hz  
720p 50Hz  
720p 50Hz  
576p  
576p  
576i  
576i  
*
*
1
1
*
*
*1 Resolution will be set to the maximum resolution supported by the connected TV. For example, when the maximum  
resolution supported by the connected TV is 1080p, the resolution will be set to 1080p.  
*2 Resolution and frequency will be that of the source disc.  
*3 If Auto is set for HDMI 1080p 24Hz and the connected TV supports 1080p 24Hz content, 1080p 24 Hz will be output  
instead of 1080p 50/60 Hz.  
When TV System is set to Multi  
When TV System is set to Multi, video signal is output at the same frequency as the source. Refer to the tables above for  
details on the frequency setting of the TV and resolution of the output video signal.  
Notes  
– HDMI 1080p 24Hz setting is disabled when output resolution is other than 1080p.  
– When TV System is set to NTSC and video source is not 60 Hz, the video output signal is converted to 60 Hz.  
– When TV System is set to PAL and video source is not 50 Hz, the video output signal is converted to 50 Hz.  
41 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Software upgrade  
New software that provides additional features or product improvements will be released as needed. We recommend  
upgrading the software of this Player to the latest version periodically.  
To check for the availability of a software upgrade, visit  
Note  
– Do not remove the USB memory device, set this Player to standby mode or unplug the power cable/network cable  
while the software upgrade is being performed.  
Upgrading the software  
1. Prepare for the software upgrade.  
3. Upgrade the software by following  
the on-screen messages.  
When you upgrade the software from USB Storage:  
Upgrade is completed. The system will be reset.  
1 Save the upgrade file package to the appropriate  
folder on the USB memory device. For more  
details, refer to the procedure document attached  
with the upgrade file package.  
2 Connect the USB memory device.  
When you upgrade the software from Network:  
Confirm that this Player is connected to the  
network.  
2. Select the upgrade method and  
start upgrade from SETUP menu.  
1 Press SETUP to display SETUP menu screen.  
2 Select General Setting = System = Upgrade.  
3 Select the item which contains the upgrade file  
package from USB Storage/Network.  
The system will search for upgrade file package.  
42 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
ADDITIONAL INFORMATION  
Troubleshooting  
Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed  
below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest  
authorized Yamaha dealer or service center.  
Power  
Problem  
Possible causes and solutions  
– Connect the AC power cable properly.  
No power.  
– Press p on the front panel to turn on the power.  
The Player power is turned off.  
– This Player will be automatically turned off after 20 minutes of inactivity (no playback)  
when Auto Power Standby (p. 34) is set to on.  
5
Basic operation  
Problem  
Possible causes and solutions  
The remote control does not work.  
– Use the remote control within its operating range. (p. 11)  
– Replace the batteries. (p. 11)  
– Check the ID settings for the main unit and the remote control. The remote control ID  
on the main unit may be changed after the main unit is reset. In this case, verify the  
remote control ID on the main unit, and set it again if needed. (p. 11)  
Buttons do not work.  
Password is forgotten.  
– Press and hold p on the front panel for more than 5 seconds to reset this Player.  
– To completely reset this Player, unplug the power cable from the AC outlet for 30  
seconds or more, plug the power cable to the AC outlet again, and then turn on this  
Player.  
– Press and hold  
,
and  
on the front panel simultaneously when no disc is  
inserted and playback is stopped to set all the settings including Security settings (p. 35)  
of this Player to their default settings. After the power is turned off automatically, press  
p to turn on the power again.  
Disc playback  
Problem  
Possible causes and solutions  
The disc tray does not open or close.  
– The disc tray is locked when any network service is selected. Press HOME to exit from  
the network service (p. 22).  
– The disc tray is locked when this Player is in the Bluetooth or Miracast receiving mode.  
Press Bluetooth to exit from Bluetooth (p. 25), or Miracast to exit from Miracast  
The Player cannot play a disc.  
– Take out the disc and clean it. (p. 5)  
– Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (p. 5)  
– Use a disc supported by the Player. (p. 3)  
– Remove the disc and then check whether the Player supports the disc or not. (p. 3)  
– Check the region code. (p. 3)  
– Check whether the disc is defective by trying another disc.  
– The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be finalized. (p. 3)  
Video stops.  
– The Player will stop if it senses shock or vibration.  
The Player makes a snapping sound  
when starting playback or loading a  
disc.  
– These sounds are not malfunctions of the Player but are normal operating conditions.  
It takes time to start Blu-ray disc  
playback.  
– This player searches for a USB memory device used as Local Storage for BD-Live  
feature (p. 30) when a Blu-ray disc is loaded. To reduce the waiting time, keep a USB  
memory device connected to the one of the USB connectors (front/rear) of this Player  
43 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Troubleshooting  
Picture  
Problem  
Possible causes and solutions  
No picture.  
– Make sure that the cables are connected correctly. (p. 12)  
– Make sure that the connected TV or the AV receiver is set to the correct input.  
– With no disc inserted, or playback stopped, press and hold  
and  
on the front  
panel simultaneously to set video resolution to the default value.  
If a picture is still not output, press and hold  
seconds to switch NTSC/PAL.  
on the front panel for approximately 5  
– When set to Disc Native, a signal that is not compatible with the connected TV is  
output. Change the setting to output a signal that is compatible with the connected TV.  
(p. 37)  
– Make sure that the disc or file you are trying to play back is compatible with this Player  
(p. 3).  
Screen freezes and operation buttons  
do not work.  
– Press , then restart playback.  
– Turn off the power and turn on the power again.  
– Press and hold p on the front panel for more than 5 seconds to reset this Player.  
Video is not output with the desired  
resolution.  
– Set to the desired resolution. (p. 37)  
Wide-screen video appears vertically  
stretched, or black bands appear at the  
top and bottom of the screen. Or 4:3  
video appears horizontally stretched.  
– Change the aspect ratio of your TV. (p. 37)  
Square noise (mosaic) appears on the  
screen.  
– Blocks in images may be visible in scenes with rapid movement due to the  
characteristics of digital image compression technology.  
Sound  
Problem  
Possible causes and solutions  
No sound, or sound is distorted.  
– Check that the audio cable is connected correctly. (p. 12)  
– Turn the volume of TV or AV receiver up.  
– There is no sound during still mode, fast forward, and fast reverse. (p. 9)  
– Audio may not be output depending on the audio recording status, such as when audio  
other than an audio signal or non-standard audio is recorded for the audio content. (p. 3)  
– Make sure that the disc or file you are trying to play back is compatible with this Player  
(p. 3).  
Left and right channels of audio are  
reversed, or sound comes out of only  
one side.  
– Check the audio connection. (p. 14)  
Cannot hear the desired audio type and/ – Refer to Audio Output setting and “About the audio output formats”. (p. 38, p. 40)  
or number of channels.  
Cannot hear the sound of PIP  
(secondary audio).  
– Set Coaxial / Optical or HDMI to PCM/Reencode. (p. 38)  
– To hear secondary audio, press 2ND AUDIO. (p. 9)  
– Depending on the disc, you may need to set secondary audio on the top menu of the  
disc. (p. 9)  
44 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
Network  
Problem  
Possible causes and solutions  
Cannot connect to the Internet.  
– When connecting to the Internet by selecting Wired in Connection setting, connect the  
Network cable properly. (p. 36)  
– Turn on the connected equipment, such as broadband router or modem.  
– Connect the broadband router and/or modem properly.  
– If Wireless is selected in Connection setting, and when you want to connect to the  
Internet using Ethernet, select Wired properly. (p. 36)  
– Properly select Wireless in Connection setting when you want to connect to the Internet  
Cannot download BD-Live contents.  
– Verify that this Player can connect to the Internet normally. Refer to “Connection Test”.  
– Connect USB memory device properly. Check that the USB memory device is  
connected to the USB connector of this Player. (p. 17)  
– Check if the Blu-ray Disc supports BD-Live.  
– Connect the USB memory device formatted in FAT16, FAT32, or NTFS.  
– It is recommended to connect the USB memory device with at least 2 GB of free space.  
If there is not enough free space, format the USB memory device. (p. 34)  
– Refer to the supplied user’s manual of the disc or consult the disc manufacturer.  
5
Cannot detect the DLNA server.  
– Verify that this Player can connect to the network normally. Refer to “Connection  
– Turn on the connected equipment, such as broadband router or the server.  
– Confirm the Player and the server are connected to the same router (or access point).  
– Depending on the DLNA server, the Player may need to be permitted from the server.  
– Depending on the DLNA server, it needs to change a firewall setting.  
Cannot play the file on the DLNA server. – Make sure the file is playable. (p. 3)  
– Check your DLNA server’s setting.  
– The playback and operating quality may be affected by your home network condition.  
Cannot connect to the Internet via  
Wireless LAN.  
– Make sure that the wireless LAN router is turned on.  
– Depending on the surrounding environment, such as the wall material, radio wave  
receiving condition, or obstacles between the Player and the wireless LAN router, the  
communication distance may be shortened. Move the Player and the wireless LAN  
router closer to each other.  
– Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital  
cordless device, may interrupt the communication. Move the Player away from such  
devices, or turn off such devices.  
– If the Internet connection using a wireless LAN is still not successful by the above  
solutions, try using Ethernet by selecting Wired in Connection setting. (p. 36)  
Wireless network is not found or  
distorted.  
– Make sure that the wireless LAN router is turned on.  
– Move this Player closer to the router or change the orientation of this Player or the  
antenna of the wireless LAN router.  
– If the wireless connection cannot be configured using the WPS function, select another  
option (Scan or Manual) (p. 19).  
– Make sure that the wireless network is not disturbed by microwave ovens, digital  
cordless phones, or other neighboring Wi-Fi devices.  
– Microwave ovens, digital cordless phones or other wireless devices in your  
neighborhood might disturb the wireless network. Turn off these devices.  
– Make sure that the firewalls in your network allow access to the wireless connection of  
this Player.  
– If the wireless network does not work properly in your home, try the wired network  
connection.  
45 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Bluetooth  
Problem  
Possible causes and solutions  
Cannot make the player paired with the  
Bluetooth device.  
– Make sure you press Bluetooth and then RED to switch the Player to the pairing  
mode.  
– Perform pairing operations with a device which supports A2DP.  
– Use a Bluetooth device whose password is “0000”.  
– Move the player and Bluetooth device closer to each other.  
– Devices that use a 2.4 GHz frequency band, such as a microwave, wireless LAN, or  
digital cordless device, may interrupt the communication. Move the Player away from  
such devices, or turn off such devices.  
– Another Bluetooth device is currently connected. Terminate current Bluetooth  
connection, and perform pairing with the new device (p. 24)  
Cannot make a Bluetooth connection.  
– Another Bluetooth device is currently connected. Terminate current Bluetooth  
connection, and make a connection with the new device.  
– More than nine devices are paired and the oldest pairing information is deleted. Perform  
pairing again (p. 24).  
No sound is produced or the sound is  
interrupted during playback.  
– The Bluetooth connection between the Player and Bluetooth device is terminated. Make  
a connection again (p. 25).  
– Move the player and Bluetooth device closer to each other.  
– Devices that use a 2.4 GHz frequency band, such as a microwave, wireless LAN, or  
digital cordless device, may interrupt the communication. Move the Player away from  
such devices, or turn off such devices.  
– Make sure that the Bluetooth function is enabled and set to send Bluetooth audio signals  
on the Bluetooth device.  
– Turn up the volume level on the Bluetooth device.  
Messages on the screen  
– The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the  
operation is not correct.  
Error message  
Unsupported File  
Possible causes and solutions  
– The file is not supported with this Player. See “Types of discs/files that can be used with this Player”  
(p. 3).  
Wrong region code!  
– The disc is an incompatible region code. See “Region management information for Blu-ray Disc/  
Network has FAILED.  
– This Player cannot be connected to the network. Check connection (p. 15) and Network setting (p. 36).  
– This Player cannot be connected to the proxy server. See “Proxy Setting” (p. 36).  
Network is OK, proxy has  
FAILED.  
BD-Live connection is  
prohibited in SETUP menu.  
– BD-Live connection is prohibited. See “BD-Live Connection” (p. 36).  
– Upgrade is failed. Check if the upgrade file is corrupted or unreadable.  
Upgrade has failed for some  
reason!  
IP Setting is not valid! Please – The IP Setting entered is not valid. Enter the correct information again.  
reset…  
46 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Glossary  
AVCHD  
AVCHD is a new format (standard) for high definition  
video cameras that can be used to record and play high-  
resolution HD images.  
BD-Live™  
DLNA  
DLNA (Digital Living Network Alliance) provides easy  
sharing of digital media through network in the home,  
and you can enjoy digital contents stored on your  
DLNA-server-software-installed PC or other DLNA  
compatible device with your TV via this Player. To  
connect this Player to your DLNA servers, some  
settings for the DLNA server or device are required. For  
details, refer to your DLNA server software or DLNA  
device.  
BD-Live is a Blu-ray Disc standard that utilizes a  
network connection, enabling this Player to go online to  
download promotional videos and other data.  
BDMV  
BDMV (Blu-ray Disc Movie) refers to one of the  
application formats used for BD-ROM which is one of  
the Blu-ray Disc specifications. BDMV is a recording  
format equivalent to DVD-Video of the DVD  
DivX®  
DivX® is a digital video format created by DivX, LLC,  
a subsidiary of Rovi Corporation. This is an official  
DivX Certified® device that plays DivX video. Visit  
divx.com for more information and software tools to  
5
specification.  
Blu-ray 3D™  
Blu-ray 3D enables you to view full high definition 3D  
images.  
BONUSVIEW™  
convert your files into DivX videos.  
Dolby Digital  
A sound system developed by Dolby Laboratories Inc.  
that gives movie theater ambience to audio output when  
the product is connected to a Dolby Digital processor or  
BONUSVIEW compatible discs let you simultaneously  
enjoy video sub-channel for two screens, audio sub-  
channel and sub-titles. A small screen appears within  
amplifier.  
the main screen during playback (Picture in Picture).  
Closed Caption  
Dolby Digital Plus  
A sound system developed as an extension to Dolby  
Digital. This audio coding technology supports 7.1  
Closed captions are kind of subtitle, and the difference  
between subtitles and captions is that subtitles are  
intended for hearing persons and captions are for the  
hearing impaired. Subtitles rarely show all of the audio.  
For example, captions show sound effects (e.g., “phone  
ringing” and “footsteps”), while subtitles do not. Before  
you select this setting, please ensure that the disc  
multi-channel surround sound.  
Dolby TrueHD  
Dolby TrueHD is a lossless coding technology that  
supports up to 8 channels of multi-channel surround  
sound for the next generation optical discs. The  
reproduced sound is true to the original source bit-for-  
bit.  
contains closed caption information.  
Color Space  
DRC (Dynamic Range Control)  
Color Space is a color range that can be represented.  
DRC lets you adjust the range between the loudest and  
softest sounds (dynamic range) for playback at average  
volume. Use this when it is hard to hear dialog, or  
RGB is a color space based on the RGB color model  
(red, green and blue) and is typically used for PC  
monitors. YCbCr is a color space based on a luminance  
during times when playback may disturb neighbors.  
DTS  
signal (Y) and two color difference signals (Cb and Cr).  
Deep Color  
This is a digital sound system developed by DTS, Inc.  
for use in cinemas.  
Deep Color refers to the use of various color depths in  
displays, up from the 24-bit depths in previous versions  
of the HDMI specification. This extra bit depth allows  
HDTVs and other displays go from millions of colors to  
billions of colors and eliminate on-screen color banding  
for smooth tonal transitions and subtle gradations  
between colors. The increased contrast ratio can  
represent many times more shades of gray between  
black and white. Also Deep Color increases the number  
of available colors within the boundaries defined by the  
RGB or YCbCr color space.  
DTS-HD High Resolution Audio  
DTS-HD High Resolution Audio is a new technology  
developed for the next generation high definition optical  
disc format.  
DTS-HD Master Audio  
DTS-HD Master Audio is a lossless audio compression  
technology developed for the next generation high  
definition optical disc format.  
47 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Glossary  
FLAC  
Mac address  
The Mac address is a unique value assigned to a network  
FLAC (Free Lossless Audio Codec) is an open file  
format for lossless audio data compression. While  
inferior in compression rate to other lossy compressed  
audio formats, it can often provide higher audio quality.  
device for identification purposes.  
Pan Scan (PS 4:3)  
A screen size that cuts off the sides of the image to allow  
viewing of wide-screen (16:9) material on a connected  
HDMI  
HDMI (High-Definition Multimedia Interface) is an  
interface that supports both video and audio on a single  
digital connection. The HDMI connection carries  
standard to high definition video signals and multi-  
channel audio signals to AV components such as HDMI  
4:3 TV.  
Subtitles  
These are the lines of text appearing at the bottom of the  
screen which translate or transcribe the dialog. They are  
recorded on many DVDs and Blu-ray Discs.  
x.v.Color  
equipped TVs, in digital form without degradation.  
Letterbox (LB 4:3)  
x.v.Color reproduces a greater range of color than  
before, showing almost all of the colors that the human  
eye can detect.  
A screen size with black bars on the top and bottom of  
the image to allow viewing of wide-screen (16:9)  
material on a connected 4:3 TV.  
Linear PCM Sound  
Linear PCM is a signal recording format used for Audio  
CDs and on some DVD and Blu-ray Discs. The sound  
on Audio CDs is recorded at 44.1 kHz with 16 bits.  
(Sound is recorded between 48 kHz with 16 bits and 96  
kHz with 24 bits on DVD discs and between 48 kHz  
with 16 bits and 192 kHz with 24 bits on Blu-ray Discs.)  
48 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Specifications  
General  
Power supply .....................................................................AC 120 V, 60 Hz  
Power consumption .............................................................................. 19 W  
Standby power consumption  
Copyright  
Note  
– Audio-visual material may consist of copyrighted  
works which must not be recorded without the  
authority of the owner of the copyright. Refer to  
relevant laws in your country.  
HDMI Control Off, Network Standby Off....................................... 0.2 W  
HDMI Control On, Network Standby Off ....................................... 0.3 W  
HDMI Control Off, Network Standby On  
Wired............................................................................................. 5.3 W  
Wireless......................................................................................... 5.0 W  
HDMI Control On, Network Standby On........................................ 5.3 W  
Dimensions (W × H × D, including protrusions) ......... 435 × 86 × 258 mm  
(17-1/8 × 3-3/8 × 10-1/8 in)  
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-  
Live™”, “BONUSVIEW™”, and the logos are  
trademarks of the Blu-ray Disc Association.  
Weight ..................................................................................2.9 kg (6.4 lbs.)  
5
Audio performance  
Audio output level (1 kHz, 0 dB)  
Blu-ray Disc/DVD/CD-DA.........................................................2 0.3 V  
Signal to noise ratio  
Blu-ray Disc/DVD/CD-DA............................................................ 115 dB  
Dynamic range  
Blu-ray Disc/DVD ......................................................................... 110 dB  
CD-DA ........................................................................................... 100 dB  
Harmonic distortion (1 kHz)  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Blu-ray Disc/DVD/CD-DA............................................................0.002%  
Frequency Response  
Blu-ray Disc/DVD .............................4 Hz to 22 kHz (48 kHz Sampling)  
4 Hz to 44 kHz (96 kHz Sampling)  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
CD-DA ...............................................................................4 Hz to 20 kHz  
Input/output  
HDMI output ..............................................................Type A connector × 1  
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,  
Deep Color, x.v. Color support  
Digital output.......................................................... Optical × 1, Coaxial × 1  
Analog audio output ..............................................................Mixed 2 ch × 1  
USB ............................................................................Type A connector × 2  
Wireless LAN..................................................Standard: IEEE 802.11 b/g/n  
Frequency range: 2.4GHz band (Channels: 1-11)  
Manufactured under license under U.S. Patent Nos:  
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872;  
7,333,929; 7,392,195; 7,272,567 & other U.S. and  
worldwide patents issued & pending. DTS-HD, the  
Symbol, & DTS-HD and the Symbol together are  
registered trademarks & DTS-HD Master Audio is a  
trademark of DTS, Inc.  
Other equipment...........................................................Remote IN/OUT × 1  
RS-232C × 1 (for custom installer)  
Product includes software. © DTS, Inc. All Rights  
Reserved.  
Ethernet × 1  
Specifications are subject to change without notice.  
“HDMI,” the “HDMI” logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI Licensing LLC in the United States  
and other countries.  
x.v.Color™  
“x.v.Color” and “x.v.Color” logo are trademarks of Sony  
Corporation.  
“AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
Continued to the next page. \  
49 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Specifications  
DivX®, DivX Certified®, DivX Plus® HD and associated  
logos are trademarks of Rovi Corporation or its  
subsidiaries and are used under license.  
DivX Certified® to play DivX® and DivX Plus® HD  
(H.264/.MKV) video up to 1080p HD including premium  
content.  
Java is a registered trademark of Oracle and/or its  
affiliates.  
ABOUT DIVX VIDEO: DivX® is a digital video format  
created by DivX, LLC, a subsidiary of Rovi Corporation.  
This is an official DivX Certified® device that has passed  
rigorous testing to verify that it plays DivX video. Visit  
divx.com for more information and software tools to  
convert your files into DivX videos.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified® device must be registered in order to play  
purchased DivX Video-on-Demand (VOD) movies. To  
obtain your registration code, locate the DivX VOD  
section in your device setup menu. Go to vod.divx.com for  
more information on how to complete your registration.  
Bluetooth is registered trademark of Bluetooth SIG.  
DLNA™ and DLNA CERTIFIED™ are trademarks or  
registered trademarks of Digital Living Network Alliance.  
All rights reserved. Unauthorized use is strictly prohibited.  
The Wi-Fi CERTIFIED Logo is a certification mark of the  
Wi-Fi Alliance.  
The Wi-Fi Protected Setup Identifier Mark is a mark of  
the Wi-Fi Alliance.  
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct” and  
“Miracast” are marks or registered marks of the Wi-Fi  
Alliance.  
This product is licensed under the AVC patent portfolio  
license and VC-1 patent portfolio license for the personal  
and non-commercial use of a consumer to (i) encode video  
in compliance with the AVC Standard and VC-1 Standard  
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1  
Video that was encoded by a consumer engaged in a  
personal and non-commercial activity and/or was obtained  
from a video provider licensed to provide AVC/VC-1  
Video. No license is granted or shall be implied for any  
other use. Additional information may be obtained from  
This product is licensed under the MVC patent portfolio  
license for the personal use of a consumer or other uses in  
which it does not receive remuneration to (i) encode video  
in compliance with the MVC Standard (“MVC Video”)  
and/or (ii) decode MVC Video that was encoded by a  
consumer engaged in a personal activity and/or was  
obtained from a video provider licensed to provide MVC  
Video. No license is granted or shall be implied for any  
other use. Additional information may be obtained from  
Windows Media Player is a registered trademark or  
trademark of Microsoft corporation in the United States  
and/or other countries  
Copyright 2004-2012 Verance Corporation. Cinavia® is a  
Verance Corporation trademark. Protected by U.S. Patent  
7,369,677 and worldwide patents issued and pending under  
license from Verance Corporation. All rights reserved.  
50 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL INFORMATION  
Index  
Numerics  
H
S
3D Playback Message,  
Secondary Audio Mark,  
A
SETUP menu ................................... 35  
Speaker Setting, SETUP menu ............ 39  
I
5
L
M
B
T
N
C
O
U
P
D
V
W
Y
Z
R
E
G
51 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Information about third party software licenses  
This product incorporates the following third party software.  
For information (copyright, etc) about each software, please read the terms and conditions stated below. By using this product, you will be deemed to have accepted the terms and  
conditions.  
c) If the modified program normally reads commands interactively when run, you  
must cause it, when started running for such interactive use in the most  
ordinary way, to print or display an announcement including an appropriate  
copyright notice and a notice that there is no warranty (or else, saying that you  
provide a warranty) and that users may redistribute the program under these  
conditions, and telling the user how to view a copy of this License. (Exception:  
if the Program itself is interactive but does not normally print such an  
announcement, your work based on the Program is not required to print an  
About Linux kernel, D-Bus, cpio, samba, SquashFS,  
iputils, udhcpc, net-tools, iproute2, dibbler,  
sysvinit, module-init-tools, util-linux-ng, psmisc,  
coreutils, gawk, grep, findutils, bash, tar, sed, gzip,  
inetunitls, gdb (gdbserver), mtd-util, Wireless  
Tools, Fusion, msdl, e2fsprogs, gconv, oprofile,  
ntfsprogs, which, libnl  
announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of  
that work are not derived from the Program, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do not  
apply to those sections when you distribute them as separate works. But when you  
distribute the same sections as part of a whole which is a work based on the Program,  
the distribution of the whole must be on the terms of this License, whose permissions  
for other licensees extend to the entire whole, and thus to each and every part regardless  
of who wrote it.  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright © 1989, 1991 Free Software Foundation, Inc.  
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document,  
but changing it is not allowed.  
Thus, it is not the intent of this section to claim rights or contest your rights to work  
written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Program.  
Preamble  
The licenses for most software are designed to take away your freedom to share and  
change it. By contrast, the GNU General Public License is intended to guarantee your  
freedom to share and change free software--to make sure the software is free for all its  
users. This General Public License applies to most of the Free Software Foundation’s  
software and to any other program whose authors commit to using it. (Some other Free  
Software Foundation software is covered by the GNU Library General Public License  
instead.) You can apply it to your programs, too.  
In addition, mere aggregation of another work not based on the Program with the  
Program (or with a work based on the Program) on a volume of a storage or distribution  
medium does not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2)  
in object code or executable form under the terms of Sections 1 and 2 above  
provided that you also do one of the following:  
When we speak of free software, we are referring to freedom, not price. Our General  
Public Licenses are designed to make sure that you have the freedom to distribute  
copies of free software (and charge for this service if you wish), that you receive source  
code or can get it if you want it, that you can change the software or use pieces of it in  
new free programs; and that you know you can do these things.  
a) Accompany it with the complete corresponding machine-readable source code,  
which must be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
To protect your rights, we need to make restrictions that forbid anyone to deny you  
these rights or to ask you to surrender the rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of the software, or if you modify it.  
b) Accompany it with a written offer, valid for at least three years, to give any  
third party, for a charge no more than your cost of physically performing source  
distribution, a complete machine-readable copy of the corresponding source  
code, to be distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
For example, if you distribute copies of such a program, whether gratis or for a fee, you  
must give the recipients all the rights that you have. You must make sure that they, too,  
receive or can get the source code. And you must show them these terms so they know  
their rights.  
c) Accompany it with the information you received as to the offer to distribute  
corresponding source code. (This alternative is allowed only for  
noncommercial distribution and only if you received the program in object  
code or executable form with such an offer, in accord with Subsection b  
above.)  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this  
license which gives you legal permission to copy, distribute and/or modify the software.  
Also, for each author’s protection and ours, we want to make certain that everyone  
understands that there is no warranty for this free software. If the software is modified  
by someone else and passed on, we want its recipients to know that what they have is  
not the original, so that any problems introduced by others will not reflect on the  
original authors’ reputations.  
The source code for a work means the preferred form of the work for making  
modifications to it. For an executable work, complete source code means all the source  
code for all modules it contains, plus any associated interface definition files, plus the  
scripts used to control compilation and installation of the executable. However, as a  
special exception, the source code distributed need not include anything that is  
normally distributed (in either source or binary form) with the major components  
(compiler, kernel, and so on) of the operating system on which the executable runs,  
unless that component itself accompanies the executable.  
Finally, any free program is threatened constantly by software patents. We wish to  
avoid the danger that redistributors of a free program will individually obtain patent  
licenses, in effect making the program proprietary. To prevent this, we have made it  
clear that any patent must be licensed for everyone’s free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
If distribution of executable or object code is made by offering access to copy from a  
designated place, then offering equivalent access to copy the source code from the same  
place counts as distribution of the source code, even though third parties are not  
compelled to copy the source along with the object code.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
4. You may not copy, modify, sublicense, or distribute the Program except as  
expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense or distribute the Program is void, and will automatically terminate your  
rights under this License. However, parties who have received copies, or rights,  
from you under this License will not have their licenses terminated so long as such  
parties remain in full compliance.  
0. This License applies to any program or other work which contains a notice placed  
by the copyright holder saying it may be distributed under the terms of this General  
Public License. The “Program”, below, refers to any such program or work, and a  
“work based on the Program” means either the Program or any derivative work  
under copyright law: that is to say, a work containing the Program or a portion of it,  
either verbatim or with modifications and/or translated into another language.  
(Hereinafter, translation is included without limitation in the term “modification”.)  
Each licensee is addressed as “you”.  
Activities other than copying, distribution and modification are not covered by this  
License; they are outside its scope. The act of running the Program is not restricted,  
and the output from the Program is covered only if its contents constitute a work  
based on the Program (independent of having been made by running the Program).  
Whether that is true depends on what the Program does.  
5. You are not required to accept this License, since you have not signed it. However,  
nothing else grants you permission to modify or distribute the Program or its  
derivative works. These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the Program (or any work based  
on the Program), you indicate your acceptance of this License to do so, and all its  
terms and conditions for copying, distributing or modifying the Program or works  
based on it.  
1. You may copy and distribute verbatim copies of the Program’s source code as you  
receive it, in any medium, provided that you conspicuously and appropriately  
publish on each copy an appropriate copyright notice and disclaimer of warranty;  
keep intact all the notices that refer to this License and to the absence of any  
warranty; and give any other recipients of the Program a copy of this License along  
with the Program.  
6. Each time you redistribute the Program (or any work based on the Program), the  
recipient automatically receives a license from the original licensor to copy,  
distribute or modify the Program subject to these terms and conditions. You may  
not impose any further restrictions on the recipients’ exercise of the rights granted  
herein. You are not responsible for enforcing compliance by third parties to this  
License.  
You may charge a fee for the physical act of transferring a copy, and you may at  
your option offer warranty protection in exchange for a fee.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for  
any other reason (not limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that contradict the conditions of  
this License, they do not excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your obligations under this License  
and any other pertinent obligations, then as a consequence you may not distribute  
the Program at all. For example, if a patent license would not permit royalty-free  
redistribution of the Program by all those who receive copies directly or indirectly  
through you, then the only way you could satisfy both it and this License would be  
to refrain entirely from distribution of the Program.  
2. You may modify your copy or copies of the Program or any portion of it, thus  
forming a work based on the Program, and copy and distribute such modifications  
or work under the terms of Section 1 above, provided that you also meet all of these  
conditions:  
a) You must cause the modified files to carry prominent notices stating that you  
changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part  
contains or is derived from the Program or any part thereof, to be licensed as a  
whole at no charge to all third parties under the terms of this License.  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply and the section as a whole  
is intended to apply in other circumstances.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
It is not the purpose of this section to induce you to infringe any patents or other  
property right claims or to contest validity of any such claims; this section has the sole  
purpose of protecting the integrity of the free software distribution system, which is  
implemented by public license practices. Many people have made generous  
contributions to the wide range of software distributed through that system in reliance  
on consistent application of that system; it is up to the author/donor to decide if he or  
she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts  
of the General Public License. Of course, the commands you use may be called  
something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu  
items--whatever suits your program.  
You should also get your employer (if you work as a programmer) or your school, if  
any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample;  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program  
‘Gnomovision’ (which makes passes at compilers) written by James Hacker.  
This section is intended to make thoroughly clear what is believed to be a consequence  
of the rest of this License.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
8. If the distribution and/or use of the Program is restricted in certain countries either  
by patents or by copyrighted interfaces, the original copyright holder who places  
the Program under this License may add an explicit geographical distribution  
limitation excluding those countries, so that distribution is permitted only in or  
among countries not thus excluded. In such case, this License incorporates the  
limitation as if written in the body of this License.  
This General Public License does not permit incorporating your program into  
proprietary programs. If your program is a subroutine library, you may consider it more  
useful to permit linking proprietary applications with the library. If this is what you  
want to do, use the GNU Library General  
9. The Free Software Foundation may publish revised and/or new versions of the  
General Public License from time to time. Such new versions will be similar in  
spirit to the present version, but may differ in detail to address new problems or  
concerns.  
Public License instead of this License.  
About gcc libgcc, gcc libstdc++  
Each version is given a distinguishing version number. If the Program specifies a  
version number of this License which applies to it and “any later version”, you have the  
option of following the terms and conditions either of that version or of any later  
version published by the Free Software Foundation. If the Program does not specify a  
version number of this License, you may choose any version ever published by the Free  
Software Foundation.  
GNU GENERAL PUBLIC LICENSE  
Version 3, 29 June 2007  
Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/>  
Everyone is permitted to copy and distribute verbatim copies of this license document,  
but changing it is not allowed.  
10. If you wish to incorporate parts of the Program into other free programs whose  
distribution conditions are different, write to the author to ask for permission. For  
software which is copyrighted by the Free Software Foundation, write to the Free  
Software Foundation; we sometimes make exceptions for this. Our decision will be  
guided by the two goals of preserving the free status of all derivatives of our free  
software and of promoting the sharing and reuse of software generally.  
Preamble  
The GNU General Public License is a free, copyleft license for software and other  
kinds of works.  
The licenses for most software and other practical works are designed to take away  
your freedom to share and change the works. By contrast, the GNU General Public  
License is intended to guarantee your freedom to share and change all versions of a  
program--to make sure it remains free software for all its users. We, the Free Software  
Foundation, use the GNU General Public License for most of our software; it applies  
also to any other work released this way by its authors. You can apply it to your  
programs, too.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO  
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING  
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE  
PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE  
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL  
NECESSARY SERVICING, REPAIR OR CORRECTION.  
When we speak of free software, we are referring to freedom, not price. Our General  
Public Licenses are designed to make sure that you have the freedom to distribute  
copies of free software (and charge for them if you wish), that you receive source code  
or can get it if you want it, that you can change the software or use pieces of it in new  
free programs, and that you know you can do these things.  
To protect your rights, we need to prevent others from denying you these rights or  
asking you to surrender the rights. Therefore, you have certain responsibilities if you  
distribute copies of the software, or if you modify it: responsibilities to respect the  
freedom of others.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED  
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER  
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS  
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING  
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
For example, if you distribute copies of such a program, whether gratis or for a fee,  
you must pass on to the recipients the same freedoms that you received. You must  
make sure that they, too, receive or can get the source code. And you must show them  
these terms so they know their rights.  
Developers that use the GNU GPL protect your rights with two steps:  
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE  
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA  
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR  
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH  
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY  
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
(1) assert copyright on the software, and (2) offer you this License giving you legal  
permission to copy, distribute and/or modify it.  
For the developers’ and authors’ protection, the GPL clearly explains that there is no  
warranty for this free software. For both users’ and authors’ sake, the GPL requires that  
modified versions be marked as changed, so that their problems will not be attributed  
erroneously to authors of previous versions.  
END OF TERMS AND CONDITIONS  
Some devices are designed to deny users access to install or run modified versions of  
the software inside them, although the manufacturer can do so. This is fundamentally  
incompatible with the aim of protecting users’ freedom to change the software. The  
systematic pattern of such abuse occurs in the area of products for individuals to use,  
which is precisely where it is most unacceptable. Therefore, we have designed this  
version of the GPL to prohibit the practice for those products. If such problems arise  
substantially in other domains, we stand ready to extend this provision to those domains  
in future versions of the GPL, as needed to protect the freedom of users.  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the  
public, the best way to achieve this is to make it free software which everyone can  
redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to the  
start of each source file to most effectively convey the exclusion of warranty; and each  
file should have at least the “copyright” line and a pointer to where the full notice is  
found.  
Finally, every program is threatened constantly by software patents. States should not  
allow patents to restrict development and use of software on general-purpose  
computers, but in those that do, we wish to avoid the special danger that patents applied  
to a free program could make it effectively proprietary. To prevent this, the GPL  
assures that patents cannot be used to render the program non-free.  
<one line to give the program’s name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS  
This program is free software; you can redistribute it and/or modify it under the  
terms of the GNU General Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your option) any later version.  
0. Definitions.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY  
WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public  
License for more details.  
“This License” refers to version 3 of the GNU General Public License.  
“Copyright” also means copyright-like laws that apply to other kinds of works, such as  
semiconductor masks.  
“The Program” refers to any copyrightable work licensed under this License. Each  
licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or  
organizations.  
You should have received a copy of the GNU General Public License along with  
this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St,  
Fifth Floor, Boston, MA 02110-1301 USA  
To “modify” a work means to copy from or adapt all or part of the work in a fashion  
requiring copyright permission, other than the making of an exact copy. The resulting  
work is called a “modified version” of the earlier work or a work “based on” the earlier  
work.  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this  
when it starts in an interactive mode:  
A “covered work” means either the unmodified Program or a work based on the  
Program.  
Gnomovision version 69, Copyright © year name of author Gnomovision comes  
with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free  
software, and you are welcome to redistribute it under certain conditions; type  
‘show c’ for details.  
To “propagate” a work means to do anything with it that, without permission, would  
make you directly or secondarily liable for infringement under applicable copyright  
law, except executing it on a computer or modifying a private copy. Propagation  
includes copying, distribution (with or without modification), making available to the  
public, and in some countries other activities as well.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To “convey” a work means any kind of propagation that enables other parties to make  
or receive copies. Mere interaction with a user through a computer network, with no  
transfer of a copy, is not conveying.  
A compilation of a covered work with other separate and independent works, which  
are not by their nature extensions of the covered work, and which are not combined  
with it such as to form a larger program, in or on a volume of a storage or distribution  
medium, is called an “aggregate” if the compilation and its resulting copyright are not  
used to limit the access or legal rights of the compilation’s users beyond what the  
individual works permit. Inclusion of a covered work in an aggregate does not cause  
this License to apply to the other parts of the aggregate.  
An interactive user interface displays “Appropriate Legal Notices” to the extent that it  
includes a convenient and prominently visible feature that (1) displays an appropriate  
copyright notice, and (2) tells the user that there is no warranty for the work (except to  
the extent that warranties are provided), that licensees may convey the work under this  
License, and how to view a copy of this License. If the interface presents a list of user  
commands or options, such as a menu, a prominent item in the list meets this criterion.  
6. Conveying Non-Source Forms.  
You may convey a covered work in object code form under the terms of sections 4 and  
5, provided that you also convey the machine-readable Corresponding Source under the  
terms of this License, in one of these ways:  
1. Source Code.  
The “source code” for a work means the preferred form of the work for making  
modifications to it. “Object code” means any non-source form of a work.  
a) Convey the object code in, or embodied in, a physical product (including a  
physical distribution medium), accompanied by the Corresponding Source fixed on a  
durable physical medium customarily used for software interchange.  
A “Standard Interface” means an interface that either is an official standard defined by  
a recognized standards body, or, in the case of interfaces specified for a particular  
programming language, one that is widely used among developers working in that  
language.  
b) Convey the object code in, or embodied in, a physical product (including a  
physical distribution medium), accompanied by a written offer, valid for at least three  
years and valid for as long as you offer spare parts or customer support for that product  
model, to give anyone who possesses the object code either (1) a copy of the  
Corresponding Source for all the software in the product that is covered by this License,  
on a durable physical medium customarily used for software interchange, for a price no  
more than your reasonable cost of physically performing this conveying of source, or  
(2) access to copy the Corresponding Source from a network server at no charge.  
The “System Libraries” of an executable work include anything, other than the work  
as a whole, that (a) is included in the normal form of packaging a Major Component,  
but which is not part of that Major Component, and (b) serves only to enable use of the  
work with that Major Component, or to implement a Standard Interface for which an  
implementation is available to the public in source code form. A “Major Component”,  
in this context, means a major essential component (kernel, window system, and so on)  
of the specific operating system (if any) on which the executable work runs, or a  
compiler used to produce the work, or an object code interpreter used to run it.  
c) Convey individual copies of the object code with a copy of the written offer to  
provide the Corresponding Source. This alternative is allowed only occasionally and  
noncommercially, and only if you received the object code with such an offer, in accord  
with subsection 6b.  
The “Corresponding Source” for a work in object code form means all the source code  
needed to generate, install, and (for an executable work) run the object code and to  
modify the work, including scripts to control those activities. However, it does not  
include the work’s System Libraries, or general-purpose tools or generally available  
free programs which are used unmodified in performing those activities but which are  
not part of the work. For example, Corresponding Source includes interface definition  
files associated with source files for the work, and the source code for shared libraries  
and dynamically linked subprograms that the work is specifically designed to require,  
such as by intimate data communication or control flow between those subprograms  
and other parts of the work.  
d) Convey the object code by offering access from a designated place (gratis or for a  
charge), and offer equivalent access to the Corresponding Source in the same way  
through the same place at no further charge. You need not require recipients to copy  
the Corresponding Source along with the object code. If the place to copy the object  
code is a network server, the Corresponding Source may be on a different server  
(operated by you or a third party) that supports equivalent copying facilities, provided  
you maintain clear directions next to the object code saying where to find the  
Corresponding Source. Regardless of what server hosts the Corresponding Source, you  
remain obligated to ensure that it is available for as long as needed to satisfy these  
requirements.  
The Corresponding Source need not include anything that users can regenerate  
automatically from other parts of the Corresponding Source.  
e) Convey the object code using peer-to-peer transmission, provided you inform  
other peers where the object code and Corresponding Source of the work are being  
offered to the general public at no charge under subsection 6d.  
The Corresponding Source for a work in source code form is that same work.  
2. Basic Permissions.  
All rights granted under this License are granted for the term of copyright on the  
Program, and are irrevocable provided the stated conditions are met. This License  
explicitly affirms your unlimited permission to run the unmodified Program. The  
output from running a covered work is covered by this License only if the output, given  
its content, constitutes a covered work. This License acknowledges your rights of fair  
use or other equivalent, as provided by copyright law.  
A separable portion of the object code, whose source code is excluded from the  
Corresponding Source as a System Library, need not be included in conveying the  
object code work.  
A “User Product” is either (1) a “consumer product”, which means any tangible  
personal property which is normally used for personal, family, or household purposes,  
or (2) anything designed or sold for incorporation into a dwelling. In determining  
whether a product is a consumer product, doubtful cases shall be resolved in favor of  
coverage. For a particular product received by a particular user, “normally used” refers  
to a typical or common use of that class of product, regardless of the status of the  
particular user or of the way in which the particular user actually uses, or expects or is  
expected to use, the product. A product is a consumer product regardless of whether the  
product has substantial commercial, industrial or non-consumer uses, unless such uses  
represent the only significant mode of use of the product.  
You may make, run and propagate covered works that you do not convey, without  
conditions so long as your license otherwise remains in force. You may convey covered  
works to others for the sole purpose of having them make modifications exclusively for  
you, or provide you with facilities for running those works, provided that you comply  
with the terms of this License in conveying all material for which you do not control  
copyright. Those thus making or running the covered works for you must do so  
exclusively on your behalf, under your direction and control, on terms that prohibit  
them from making any copies of your copyrighted material outside their relationship  
with you.  
“Installation Information” for a User Product means any methods, procedures,  
authorization keys, or other information required to install and execute modified  
versions of a covered work in that User Product from a modified version of its  
Corresponding Source. The information must suffice to ensure that the continued  
functioning of the modified object code is in no case prevented or interfered with solely  
because modification has been made.  
Conveying under any other circumstances is permitted solely under the conditions  
stated below. Sublicensing is not allowed; section 10 makes it unnecessary.  
3. Protecting Users’ Legal Rights From Anti-Circumvention Law.  
No covered work shall be deemed part of an effective technological measure under  
any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty  
adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention  
of such measures.  
If you convey an object code work under this section in, or with, or specifically for use  
in, a User Product, and the conveying occurs as part of a transaction in which the right  
of possession and use of the User Product is transferred to the recipient in perpetuity or  
for a fixed term (regardless of how the transaction is characterized), the Corresponding  
Source conveyed under this section must be accompanied by the Installation  
Information. But this requirement does not apply if neither you nor any third party  
retains the ability to install modified object code on the User Product (for example, the  
work has been installed in ROM).  
When you convey a covered work, you waive any legal power to forbid circumvention  
of technological measures to the extent such circumvention is effected by exercising  
rights under this License with respect to the covered work, and you disclaim any  
intention to limit operation or modification of the work as a means of enforcing, against  
the work’s users, your or third parties’ legal rights to forbid circumvention of  
technological measures.  
The requirement to provide Installation Information does not include a requirement to  
continue to provide support service, warranty, or updates for a work that has been  
modified or installed by the recipient, or for the User Product in which it has been  
modified or installed. Access to a network may be denied when the modification itself  
materially and adversely affects the operation of the network or violates the rules and  
protocols for communication across the network.  
4. Conveying Verbatim Copies.  
You may convey verbatim copies of the Program’s source code as you receive it, in  
any medium, provided that you conspicuously and appropriately publish on each copy  
an appropriate copyright notice; keep intact all notices stating that this License and any  
non-permissive terms added in accord with section 7 apply to the code; keep intact all  
notices of the absence of any warranty; and give all recipients a copy of this License  
along with the Program.  
Corresponding Source conveyed, and Installation Information provided, in accord  
with this section must be in a format that is publicly documented (and with an  
implementation available to the public in source code form), and must require no  
special password or key for unpacking, reading or copying.  
You may charge any price or no price for each copy that you convey, and you may  
offer support or warranty protection for a fee.  
7. Additional Terms.  
5. Conveying Modified Source Versions.  
“Additional permissions” are terms that supplement the terms of thisLicense by  
making exceptions from one or more of its conditions. Additional permissions that are  
applicable to the entire Program shall be treated as though they were included in this  
License, to the extent that they are valid under applicable law. If additional permissions  
apply only to part of the Program, that part may be used separately under those  
permissions, but the entire Program remains governed by this License without regard to  
the additional permissions.  
You may convey a work based on the Program, or the modifications to produce it from  
the Program, in the form of source code under the terms of section 4, provided that you  
also meet all of these conditions:  
a) The work must carry prominent notices stating that you modified it, and giving a  
relevant date.  
b) The work must carry prominent notices stating that it is released under this License  
and any conditions added under section  
When you convey a copy of a covered work, you may at your option remove any  
additional permissions from that copy, or from any part of it. (Additional permissions  
may be written to require their own removal in certain cases when you modify the  
work.) You may place additional permissions on material, added by you to a covered  
work, for which you have or can give appropriate copyright permission.  
7. This requirement modifies the requirement in section 4 to “keep intact all notices”.  
c) You must license the entire work, as a whole, under this License to anyone who  
comes into possession of a copy. This License will therefore apply, along with any  
applicable section 7 additional terms, to the whole of the work, and all its parts,  
regardless of how they are packaged. This License gives no permission to license the  
work in any other way, but it does not invalidate such permission if you have separately  
received it.  
Notwithstanding any other provision of this License, for material you add to a covered  
work, you may (if authorized by the copyright holders of that material) supplement the  
terms of this License with terms:  
a) Disclaiming warranty or limiting liability differently from the terms of sections 15  
and 16 of this License; or  
d) If the work has interactive user interfaces, each must display Appropriate Legal  
Notices; however, if the Program has interactive interfaces that do not display  
Appropriate Legal Notices, your work need not make them do so.  
b) Requiring preservation of specified reasonable legal notices or author attributions  
in that material or in the Appropriate Legal Notices displayed by works containing it; or  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
c) Prohibiting misrepresentation of the origin of that material, or requiring that  
modified versions of such material be marked in reasonable ways as different from the  
original version; or  
If you convey a covered work, knowingly relying on a patent license, and the  
Corresponding Source of the work is not available for anyone to copy, free of charge  
and under the terms of this License, through a publicly available network server or  
other readily accessible means, then you must either (1) cause the Corresponding  
Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent  
license for this particular work, or (3) arrange, in a manner consistent with the  
requirements of this License, to extend the patent license to downstream recipients.  
“Knowingly relying” means you have actual knowledge that, but for the patent license,  
your conveying the covered work in a country, or your recipient’s use of the covered  
work in a country, would infringe one or more identifiable patents in that country that  
you have reason to believe are valid.  
d) Limiting the use for publicity purposes of names of licensors or authors of the  
material; or  
e) Declining to grant rights under trademark law for use of some trade names,  
trademarks, or service marks; or  
f) Requiring indemnification of licensors and authors of that material by anyone who  
conveys the material (or modified versions of it) with contractual assumptions of  
liability to the recipient, for any liability that these contractual assumptions directly  
impose on those licensors and authors.  
If, pursuant to or in connection with a single transaction or arrangement, you convey,  
or propagate by procuring conveyance of, a covered work, and grant a patent license to  
some of the parties receiving the covered work authorizing them to use, propagate,  
modify or convey a specific copy of the covered work, then the patent license you grant  
is automatically extended to all recipients of the covered work and works based on it.  
All other non-permissive additional terms are considered “further restrictions” within  
the meaning of section 10. If the Program as you received it, or any part of it, contains  
a notice stating that it is governed by this License along with a term that is a further  
restriction, you may remove that term. If a license document contains a further  
restriction but permits relicensing or conveying under this License, you may add to a  
covered work material governed by the terms of that license document, provided that  
the further restriction does not survive such relicensing or conveying.  
A patent license is “discriminatory” if it does not include within the scope of its  
coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more  
of the rights that are specifically granted under this License. You may not convey a  
covered work if you are a party to an arrangement with a third party that is in the  
business of distributing software, under which you make payment to the third party  
based on the extent of your activity of conveying the work, and under which the third  
party grants, to any of the parties who would receive the covered work from you, a  
discriminatory patent license (a) in connection with copies of the covered work  
conveyed by you (or copies made from those copies), or (b) primarily for and in  
connection with specific products or compilations that contain the covered work, unless  
you entered into that arrangement, or that patent license was granted, prior to 28 March  
2007.  
If you add terms to a covered work in accord with this section, you must place, in the  
relevant source files, a statement of the additional terms that apply to those files, or a  
notice indicating where to find the applicable terms.  
Additional terms, permissive or non-permissive, may be stated in the form of a  
separately written license, or stated as exceptions; the above requirements apply either  
way.  
8. Termination.  
You may not propagate or modify a covered work except as expressly provided under  
this License. Any attempt otherwise to propagate or modify it is void, and will  
automatically terminate your rights under this License (including any patent licenses  
granted under the third paragraph of section 11).  
Nothing in this License shall be construed as excluding or limiting any implied license  
or other defenses to infringement that may otherwise be available to you under  
applicable patent law.  
12. No Surrender of Others’ Freedom.  
However, if you cease all violation of this License, then your license from a particular  
copyright holder is reinstated (a) provisionally, unless and until the copyright holder  
explicitly and finally terminates your license, and (b) permanently, if the copyright  
holder fails to notify you of the violation by some reasonable means prior to 60 days  
after the cessation.  
If conditions are imposed on you (whether by court order, agreement or otherwise)  
that contradict the conditions of this License, they do not excuse you from the  
conditions of this License. If you cannot convey a covered work so as to satisfy  
simultaneously your obligations under this License and any other pertinent obligations,  
then as a consequence you may not convey it at all. For example, if you agree to terms  
that obligate you to collect a royalty for further conveying from those to whom you  
convey the Program, the only way you could satisfy both those terms and this License  
would be to refrain entirely from conveying the Program.  
Moreover, your license from a particular copyright holder is reinstated permanently if  
the copyright holder notifies you of the violation by some reasonable means, this is the  
first time you have received notice of violation of this License (for any work) from that  
copyright holder, and you cure the violation prior to 30 days after your receipt of the  
notice.  
13. Use with the GNU Affero General Public License.  
Termination of your rights under this section does not terminate the licenses of parties  
who have received copies or rights from you under this License. If your rights have  
been terminated and not permanently reinstated, you do not qualify to receive new  
licenses for the same material under section 10.  
Notwithstanding any other provision of this License, you have permission to link or  
combine any covered work with a work licensed under version 3 of the GNU Affero  
General Public License into a single combined work, and to convey the resulting work.  
The terms of this License will continue to apply to the part which is the covered work,  
but the special requirements of the GNU Affero General Public License, section 13,  
concerning interaction through a network will apply to the combination as such.  
9. Acceptance Not Required for Having Copies.  
You are not required to accept this License in order to receive or run a copy of the  
Program. Ancillary propagation of a covered work occurring solely as a consequence  
of using peer-to-peer transmission to receive a copy likewise does not require  
acceptance. However, nothing other than this License grants you permission to  
propagate or modify any covered work. These actions infringe copyright if you do not  
accept this License. Therefore, by modifying or propagating a covered work, you  
indicate your acceptance of this License to do so.  
14. Revised Versions of this License.  
The Free Software Foundation may publish revised and/or new versions of the GNU  
General Public License from time to time. Such new versions will be similar in spirit to  
the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Program specifies that a  
certain numbered version of the GNU General Public License “or any later version”  
applies to it, you have the option of following the terms and conditions either of that  
numbered version or of any later version published by the Free Software Foundation. If  
the Program does not specify a version number of the GNU General Public License,  
you may choose any version ever published by the Free Software Foundation.  
10. Automatic Licensing of Downstream Recipients.  
Each time you convey a covered work, the recipient automatically receives a license  
from the original licensors, to run, modify and propagate that work, subject to this  
License. You are not responsible for enforcing compliance by third parties with this  
License.  
If the Program specifies that a proxy can decide which future versions of the GNU  
General Public License can be used, that proxy’s public statement of acceptance of a  
version permanently authorizes you to choose that version for the Program.  
An “entity transaction” is a transaction transferring control of an organization, or  
substantially all assets of one, or subdividing an organization, or merging organizations.  
If propagation of a covered work results from an entity transaction, each party to that  
transaction who receives a copy of the work also receives whatever licenses to the work  
the party’s predecessor in interest had or could give under the previous paragraph, plus  
a right to possession of the Corresponding Source of the work from the predecessor in  
interest, if the predecessor has it or can get it with reasonable efforts.  
Later license versions may give you additional or different permissions. However, no  
additional obligations are imposed on any author or copyright holder as a result of your  
choosing to follow a later version.  
15. Disclaimer of Warranty.  
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED  
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES  
PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM  
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
You may not impose any further restrictions on the exercise of the rights granted or  
affirmed under this License. For example, you may not impose a license fee, royalty, or  
other charge for exercise of rights granted under this License, and you may not initiate  
litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent  
claim is infringed by making, using, selling, offering for sale, or importing the Program  
or any portion of it.  
11. Patents.  
A “contributor” is a copyright holder who authorizes use under this License of the  
Program or a work on which the Program is based. The work thus licensed is called the  
contributor’s “contributor version”.  
16. Limitation of Liability.  
A contributor’s “essential patent claims” are all patent claims owned or controlled by  
the contributor, whether already acquired or hereafter acquired, that would be infringed  
by some manner, permitted by this License, of making, using, or selling its contributor  
version, but do not include claims that would be infringed only as a consequence of  
further modification of the contributor version. For purposes of this definition,  
“control” includes the right to grant patent sublicenses in a manner consistent with the  
requirements of this License.  
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO  
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO  
MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE  
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE  
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO  
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES  
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM  
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR  
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license  
under the contributor’s essential patent claims, to make, use, sell, offer for sale, import  
and otherwise run, modify and propagate the contents of its contributor version.  
In the following three paragraphs, a “patent license” is any express agreement or  
commitment, however denominated, not to enforce a patent (such as an express  
permission to practice a patent or covenant not to sue for patent infringement). To  
“grant” such a patent license to a party means to make such an agreement or  
commitment not to enforce a patent against the party.  
17. Interpretation of Sections 15 and 16.  
If the disclaimer of warranty and limitation of liability provided above cannot be given  
local legal effect according to their terms, reviewing courts shall apply local law that  
most closely approximates an absolute waiver of all civil liability in connection with the  
Program, unless a warranty or assumption of liability accompanies a copy of the  
Program in return for a fee.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
END OF TERMS AND CONDITIONS  
You have permission to propagate a work of Target Code formed by combining the  
Runtime Library with Independent Modules, even if such propagation would otherwise  
violate the terms of GPLv3, provided that all Target Code was generated by Eligible  
Compilation Processes.  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the  
public, the best way to achieve this is to make it free software which everyone can  
redistribute and change under these terms.  
You may then convey such a combination under terms of your choice, consistent with  
the licensing of the Independent Modules.  
To do so, attach the following notices to the program. It is safest to attach them to the  
start of each source file to most effectively state the exclusion of warranty; and each file  
should have at least the “copyright” line and a pointer to where the full notice is found.  
2. No Weakening of GCC Copyleft.  
The availability of this Exception does not imply any general presumption that third-  
party software is unaffected by the copyleft requirements of the license of GCC.  
<one line to give the program’s name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
About glibc, libmtp, libusb, libusb-compat, DirectFB,  
SaWMan, Qt  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
This program is free software: you can redistribute it and/or modify it under the terms  
of the GNU General Public License as published by the Free Software Foundation,  
either version 3 of the License, or (at your option) any later version.  
Copyright © 1991, 1999 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
This program is distributed in the hope that it will be useful, but WITHOUT ANY  
WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for  
more details.  
Everyone is permitted to copy and distribute verbatim copies of this license document,  
but changing it is not allowed.  
You should have received a copy of the GNU General Public License along with this  
program. If not, see <http://www.gnu.org/licenses/>.  
[This is the first released version of the Lesser GPL. It also counts as the successor of  
the GNU Library Public License, version 2, hence the version number 2.1.]  
Also add information on how to contact you by electronic and paper mail.  
Preamble  
If the program does terminal interaction, make it output a short notice like this when it  
starts in an interactive mode:  
The licenses for most software are designed to take away your freedom to share and  
change it. By contrast, the GNU General Public Licenses are intended to guarantee  
your freedom to share and change free software--to make sure the software is free for  
all its users.  
<program> Copyright © <year> <name of author>  
This license, the Lesser General Public License, applies to some specially designated  
software packages--typically libraries--of the Free Software Foundation and other  
authors who decide to use it. You can use it too, but we suggest you first think carefully  
about whether this license or the ordinary General Public License is the better strategy  
to use in any particular case, based on the explanations below.  
This program comes with ABSOLUTELY NO WARRANTY; for details type ‘show  
w’.  
This is free software, and you are welcome to redistribute it under certain conditions;  
type ‘show c’ for details.  
When we speak of free software, we are referring to freedom of use, not price. Our  
General Public Licenses are designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this service if you wish); that you  
receive source code or can get it if you want it; that you can change the software and  
use pieces of it in new free programs; and that you are informed that you can do these  
things.  
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts  
of the General Public License. Of course, your program’s commands might be  
different; for a GUI interface, you would use an “about box”.  
You should also get your employer (if you work as a programmer) or school, if any, to  
sign a “copyright disclaimer” for the program, if necessary.  
To protect your rights, we need to make restrictions that forbid distributors to deny you  
these rights or to ask you to surrender these rights. These restrictions translate to  
certain responsibilities for you if you distribute copies of the library or if you modify it.  
For more information on this, and how to apply and follow the GNU GPL, see  
<http://www.gnu.org/licenses/>.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must  
give the recipients all the rights that we gave you. You must make sure that they, too,  
receive or can get the source code. If you link other code with the library, you must  
provide complete object files to the recipients, so that they can relink them with the  
library after making changes to the library and recompiling it. And you must show  
them these terms so they know their rights.  
The GNU General Public License does not permit incorporating your program into  
proprietary programs. If your program is a subroutine library, you may consider it more  
useful to permit linking proprietary applications with the library. If this is what you  
want to do, use the GNU Lesser General Public License instead of this License. But  
first, please read  
<http://www.gnu.org/philosophy/why-not-lgpl.html>.  
GCC RUNTIME LIBRARY EXCEPTION  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we  
offer you this license, which gives you legal permission to copy, distribute and/or  
modify the library.  
Version 3.1, 31 March 2009  
To protect each distributor, we want to make it very clear that there is no warranty for  
the free library. Also, if the library is modified by someone else and passed on, the  
recipients should know that what they have is not the original version, so that the  
original author’s reputation will not be affected by problems that might be introduced  
by others.  
Copyright c 2009 Free Software Foundation, Inc. <http://fsf.org/>  
Everyone is permitted to copy and distribute verbatim copies of this license document,  
but changing it is not allowed.  
This GCC Runtime Library Exception (“Exception”) is an additional permission under  
section 7 of the GNU General Public License, version 3 (“GPLv3”). It applies to a  
given file (the “Runtime Library”) that bears a notice placed by the copyright holder of  
the file stating that the file is governed by GPLv3 along with this Exception.  
Finally, software patents pose a constant threat to the existence of any free program.  
We wish to make sure that a company cannot effectively restrict the users of a free  
program by obtaining a restrictive license from a patent holder. Therefore, we insist  
that any patent license obtained for a version of the library must be consistent with the  
full freedom of use specified in this license.  
When you use GCC to compile a program, GCC may combine portions of certain GCC  
header files and runtime libraries with the compiled program. The purpose of this  
Exception is to allow compilation of non-GPL (including proprietary) programs to use,  
in this way, the header files and runtime libraries covered by this Exception.  
Most GNU software, including some libraries, is covered by the ordinary GNU General  
Public License. This license, the GNU Lesser General Public License, applies to  
certain designated libraries, and is quite different from the ordinary General Public  
License. We use this license for certain libraries in order to permit linking those  
libraries into non-free programs.  
0. Definitions.  
A file is an “Independent Module” if it either requires the Runtime Library for  
execution after a Compilation Process, or makes use of an interface provided by the  
Runtime Library, but is not otherwise based on the Runtime Library.  
When a program is linked with a library, whether statically or using a shared library, the  
combination of the two is legally speaking a combined work, a derivative of the original  
library. The ordinary General Public License therefore permits such linking only if the  
entire combination fits its criteria of freedom. The Lesser General Public License  
permits more lax criteria for linking other code with the library.  
“GCC” means a version of the GNU Compiler Collection, with or without  
modifications, governed by version 3 (or a specified later version) of the GNU General  
Public License (GPL) with the option of using any subsequent versions published by  
the FSF.  
We call this license the “Lesser” General Public License because it does Less to protect  
the user’s freedom than the ordinary General Public License. It also provides other free  
software developers Less of an advantage over competing non-free programs. These  
disadvantages are the reason we use the ordinary General Public License for many  
libraries. However, the Lesser license provides advantages in certain special  
circumstances.  
“GPL-compatible Software” is software whose conditions of propagation, modification  
and use would permit combination with GCC in accord with the license of GCC.  
“Target Code” refers to output from any compiler for a real or virtual target processor  
architecture, in executable form or suitable for input to an assembler, loader, linker and/  
or execution phase.  
For example, on rare occasions, there may be a special need to encourage the widest  
possible use of a certain library, so that it becomes a de-facto standard. To achieve this,  
non-free programs must be allowed to use the library. A more frequent case is that a  
free library does the same job as widely used non-free libraries. In this case, there is  
little to gain by limiting the free library to free software only, so we use the Lesser  
General Public License.  
Notwithstanding that, Target Code does not include data in any format that is used as a  
compiler intermediate representation, or used for producing a compiler intermediate  
representation.  
The “Compilation Process” transforms code entirely represented in non-intermediate  
languages designed for human-written code, and/or in Java Virtual Machine byte code,  
into Target Code. Thus, for example, use of source code generators and preprocessors  
need not be considered part of the Compilation Process, since the Compilation Process  
can be understood as starting with the output of the generators or preprocessors.  
In other cases, permission to use a particular library in non-free programs enables a  
greater number of people to use a large body of free software. For example, permission  
to use the GNU C Library in non-free programs enables many more people to use the  
whole GNU operating system, as well as its variant, the GNU/Linux operating system.  
A Compilation Process is “Eligible” if it is done using GCC, alone or with other GPL-  
compatible software, or if it is done without using any work based on GCC. For  
example, using non-GPL-compatible Software to optimize any GCC intermediate  
representations would not qualify as an Eligible Compilation Process.  
Although the Lesser General Public License is Less protective of the users’ freedom, it  
does ensure that the user of a program that is linked with the Library has the freedom  
and the wherewithal to run that program using a modified version of the Library.  
The precise terms and conditions for copying, distribution and modification follow.  
Pay close attention to the difference between a “work based on the library” and a “work  
that uses the library”. The former contains code derived from the library, whereas the  
latter must be combined with the library in order to run.  
1. Grant of Additional Permission.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
GNU LESSER GENERAL PUBLIC LICENSE  
5. A program that contains no derivative of any portion of the Library, but is designed  
to work with the Library by being compiled or linked with it, is called a “work that  
uses the Library”. Such a work, in isolation, is not a derivative work of the Library,  
and therefore falls outside the scope of this License.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
0. This License Agreement applies to any software library or other program which  
contains a notice placed by the copyright holder or other authorized party saying it  
may be distributed under the terms of this Lesser General Public License (also  
called “this License”). Each licensee is addressed as “you”.  
However, linking a “work that uses the Library” with the Library creates an executable  
that is a derivative of the Library (because it contains portions of the Library), rather  
than a “work that uses the library”. The executable is therefore covered by this License.  
Section 6 states terms for distribution of such executables.  
A “library” means a collection of software functions and/or data prepared so as to be  
conveniently linked with application programs (which use some of those functions and  
data) to form executables.  
When a “work that uses the Library” uses material from a header file that is part of the  
Library, the object code for the work may be a derivative work of the Library even  
though the source code is not. Whether this is true is especially significant if the work  
can be linked without the Library, or if the work is itself a library. The threshold for  
this to be true is not precisely defined by law.  
The “Library”, below, refers to any such software library or work which has been  
distributed under these terms. A “work based on the Library” means either the Library  
or any derivative work under copyright law: that is to say, a work containing the  
Library or a portion of it, either verbatim or with modifications and/or translated  
straightforwardly into another language. (Hereinafter, translation is included without  
limitation in the term “modification”.)  
If such an object file uses only numerical parameters, data structure layouts and  
accessors, and small macros and small inline functions (ten lines or less in length), then  
the use of the object file is unrestricted, regardless of whether it is legally a derivative  
work. (Executables containing this object code plus portions of the Library will still  
fall under Section 6.)  
“Source code” for a work means the preferred form of the work for making  
modifications to it. For a library, complete source code means all the source code for  
all modules it contains, plus any associated interface definition files, plus the scripts  
used to control compilation and installation of the library.  
Otherwise, if the work is a derivative of the Library, you may distribute the object code  
for the work under the terms of Section 6. Any executables containing that work also  
fall under Section 6, whether or not they are linked directly with the Library itself.  
Activities other than copying, distribution and modification are not covered by this  
License; they are outside its scope. The act of running a program using the Library is  
not restricted, and output from such a program is covered only if its contents constitute  
a work based on the Library (independent of the use of the Library in a tool for writing  
it). Whether that is true depends on what the Library does and what the program that  
uses the Library does.  
6. As an exception to the Sections above, you may also combine or link a ‘work that  
uses the Library” with the Library to produce a work containing portions of the  
Library, and distribute that work under terms of your choice, provided that the  
terms permit modification of the work for the customer’s own use and reverse  
engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in  
it and that the Library and its use are covered by this License. You must supply a copy  
of this License. If the work during execution displays copyright notices, you must  
include the copyright notice for the Library among them, as well as a reference  
directing the user to the copy of this License. Also, you must do one of these things:  
1. You may copy and distribute verbatim copies of the Library’s complete source  
code as you receive it, in any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate copyright notice and disclaimer  
of warranty; keep intact all the notices that refer to this License and to the absence  
of any warranty; and distribute a copy of this License along with the Library.  
a) Accompany the work with the complete corresponding machine-readable  
source code for the Library including whatever changes were used in the work  
(which must be distributed under Sections 1 and 2 above); and, if the work is an  
executable linked with the Library, with the complete machine-readable “work  
that uses the Library”, as object code and/or source code, so that the user can  
modify the Library and then relink to produce a modified executable containing  
the modified Library. (It is understood that the user who changes the contents  
of definitions files in the Library will not necessarily be able to recompile the  
application to use the modified definitions.)  
You may charge a fee for the physical act of transferring a copy, and you may at your  
option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus  
forming a work based on the Library, and copy and distribute such modifications or  
work under the terms of Section 1 above, provided that you also meet all of these  
conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you  
changed the files and the date of any change.  
b) Use a suitable shared library mechanism for linking with the Library. A  
suitable mechanism is one that (1) uses at run time a copy of the library already  
present on the user’s computer system, rather than copying library functions  
into the executable, and (2) will operate properly with a modified version of the  
library, if the user installs one, as long as the modified version is interface-  
compatible with the version that the work was made with.  
c) You must cause the whole of the work to be licensed at no charge to all third  
parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be  
supplied by an application program that uses the facility, other than as an  
argument passed when the facility is invoked, then you must make a good faith  
effort to ensure that, in the event an application does not supply such function  
or table, the facility still operates, and performs whatever part of its purpose  
remains meaningful.  
c) Accompany the work with a written offer, valid for at least three years, to give  
the same user the materials specified in Subsection 6a, above, for a charge no  
more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated  
place, offer equivalent access to copy the above specified materials from the  
same place.  
(For example, a function in a library to compute square roots has a purpose that is  
entirely well-defined independent of the application. Therefore, Subsection 2d  
requires that any application-supplied function or table used by this function must  
be optional: if the application does not supply it, the square root function must still  
compute square roots.)  
e) Verify that the user has already received a copy of these materials or that you  
have already sent this user a copy.  
For an executable, the required form of the “work that uses the Library” must include  
any data and utility programs needed for reproducing the executable from it. However,  
as a special exception, the materials to be distributed need not include anything that is  
normally distributed (in either source or binary form) with the major components  
(compiler, kernel, and so on) of the operating system on which the executable runs,  
unless that component itself accompanies the executable.  
These requirements apply to the modified work as a whole. If identifiable sections of  
that work are not derived from the Library, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do not  
apply to those sections when you distribute them as separate works. But when you  
distribute the same sections as part of a whole which is a work based on the Library, the  
distribution of the whole must be on the terms of this License, whose permissions for  
other licensees extend to the entire whole, and thus to each and every part regardless of  
who wrote it.  
It may happen that this requirement contradicts the license restrictions of other  
proprietary libraries that do not normally accompany the operating system. Such a  
contradiction means you cannot use both them and the Library together in an executable  
that you distribute.  
Thus, it is not the intent of this section to claim rights or contest your rights to work  
written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Library.  
7. You may place library facilities that are a work based on the Library side-by-side in  
a single library together with other library facilities not covered by this License,  
and distribute such a combined library, provided that the separate distribution of the  
work based on the Library and of the other library facilities is otherwise permitted,  
and provided that you do these two things:  
In addition, mere aggregation of another work not based on the Library with the Library  
(or with a work based on the Library) on a volume of a storage or distribution medium  
does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License  
instead of this License to a given copy of the Library. To do this, you must alter all  
the notices that refer to this License, so that they refer to the ordinary GNU General  
Public License, version 2, instead of to this License. (If a newer version than  
version 2 of the ordinary GNU General Public License has appeared, then you can  
specify that version instead if you wish.) Do not make any other change in these  
notices.  
a) Accompany the combined library with a copy of the same work based on the  
Library, uncombined with any other library facilities. This must be distributed  
under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a  
work based on the Library, and explaining where to find the accompanying  
uncombined form of the same work.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary  
GNU General Public License applies to all subsequent copies and derivative works  
made from that copy.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as  
expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense, link with, or distribute the Library is void, and will automatically  
terminate your rights under this License. However, parties who have received  
copies, or rights, from you under this License will not have their licenses  
terminated so long as such parties remain in full compliance.  
This option is useful when you wish to copy part of the code of the Library into a  
program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under  
Section 2) in object code or executable form under the terms of Sections 1 and 2  
above provided that you accompany it with the complete corresponding machine-  
readable source code, which must be distributed under the terms of Sections 1 and 2  
above on a medium customarily used for software interchange.  
9. You are not required to accept this License, since you have not signed it. However,  
nothing else grants you permission to modify or distribute the Library or its  
derivative works. These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the Library (or any work based on  
the Library), you indicate your acceptance of this License to do so, and all its terms  
and conditions for copying, distributing or modifying the Library or works based  
on it.  
If distribution of object code is made by offering access to copy from a designated  
place, then offering equivalent access to copy the source code from the same place  
satisfies the requirement to distribute the source code, even though third parties are not  
compelled to copy the source along with the object code.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Each time you redistribute the Library (or any work based on the Library), the  
recipient automatically receives a license from the original licensor to copy,  
distribute, link with or modify the Library subject to these terms and conditions.  
You may not impose any further restrictions on the recipients’ exercise of the rights  
granted herein. You are not responsible for enforcing compliance by third parties  
with this License.  
This library is free software; you can redistribute it and/or modify it under the terms  
of the GNU Lesser General Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY  
WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public  
License for more details.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for  
any other reason (not limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that contradict the conditions of  
this License, they do not excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your obligations under this License  
and any other pertinent obligations, then as a consequence you may not distribute  
the Library at all. For example, if a patent license would not permit royalty-free  
redistribution of the Library by all those who receive copies directly or indirectly  
through you, then the only way you could satisfy both it and this License would be  
to refrain entirely from distribution of the Library.  
You should have received a copy of the GNU Lesser General Public License along  
with this library; if not, write to the Free Software Foundation, Inc., 59 Temple  
Place, Suite 330, Boston, MA 02111-1307 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your school, if  
any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample;  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a  
library for tweaking knobs) written by James Random Hacker.  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply, and the section as a whole  
is intended to apply in other circumstances.  
<signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice  
That’s all there is to it!  
It is not the purpose of this section to induce you to infringe any patents or other  
property right claims or to contest validity of any such claims; this section has the sole  
purpose of protecting the integrity of the free software distribution system which is  
implemented by public license practices. Many people have made generous  
contributions to the wide range of software distributed through that system in reliance  
on consistent application of that system; it is up to the author/donor to decide if he or  
she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
About Live555, procps (ps, top), libavformat,  
libavutil, libavcodec, zziplib  
GNU LIBRARY GENERAL PUBLIC LICENSE  
Version 2, June 1991  
This section is intended to make thoroughly clear what is believed to be a consequence  
of the rest of this License.  
Copyright (C) 1991 Free Software Foundation, Inc.  
51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA  
12. If the distribution and/or use of the Library is restricted in certain countries either  
by patents or by copyrighted interfaces, the original copyright holder who places  
the Library under this License may add an explicit geographical distribution  
limitation excluding those countries, so that distribution is permitted only in or  
among countries not thus excluded. In such case, this License incorporates the  
limitation as if written in the body of this License.  
Everyone is permitted to copy and distribute verbatim copies of this license document,  
but changing it is not allowed.  
[This is the first released version of the library GPL. It is numbered 2 because it goes  
with version 2 of the ordinary GPL.]  
13. The Free Software Foundation may publish revised and/or new versions of the  
Lesser General Public License from time to time. Such new versions will be similar  
in spirit to the present version, but may differ in detail to address new problems or  
concerns.  
Preamble  
The licenses for most software are designed to take away your freedom to share and  
change it. By contrast, the GNU General Public Licenses are intended to guarantee your  
freedom to share and change free software--to make sure the software is free for all its  
users.  
Each version is given a distinguishing version number. If the Library specifies a  
version number of this License which applies to it and “any later version”, you have the  
option of following the terms and conditions either of that version or of any later  
version published by the Free Software Foundation. If the Library does not specify a  
license version number, you may choose any version ever published by the Free  
Software Foundation.  
This license, the Library General Public License, applies to some specially designated  
Free Software Foundation software, and to any other libraries whose authors decide to  
use it. You can use it for your libraries, too.  
When we speak of free software, we are referring to freedom, not price. Our General  
Public Licenses are designed to make sure that you have the freedom to distribute  
copies of free software (and charge for this service if you wish), that you receive source  
code or can get it if you want it, that you can change the software or use pieces of it in  
new free programs; and that you know you can do these things.  
14. If you wish to incorporate parts of the Library into other free programs whose  
distribution conditions are incompatible with these, write to the author to ask for  
permission. For software which is copyrighted by the Free Software Foundation,  
write to the Free Software Foundation; we sometimes make exceptions for this.  
Our decision will be guided by the two goals of preserving the free status of all  
derivatives of our free software and of promoting the sharing and reuse of software  
generally.  
To protect your rights, we need to make restrictions that forbid anyone to deny you  
these rights or to ask you to surrender the rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of the library, or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must  
give the recipients all the rights that we gave you. You must make sure that they, too,  
receive or can get the source code. If you link a program with the library, you must  
provide complete object files to the recipients so that they can relink them with the  
library, after making changes to the library and recompiling it. And you must show  
them these terms so they know their rights.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO  
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING  
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE  
LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE  
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL  
NECESSARY SERVICING, REPAIR OR CORRECTION.  
Our method of protecting your rights has two steps: (1) copyright the library, and (2)  
offer you this license which gives you legal permission to copy, distribute and/or  
modify the library.  
Also, for each distributor’s protection, we want to make certain that everyone  
understands that there is no warranty for this free library. If the library is modified by  
someone else and passed on, we want its recipients to know that what they have is not  
the original version, so that any problems introduced by others will not reflect on the  
original authors’ reputations.  
Finally, any free program is threatened constantly by software patents. We wish to  
avoid the danger that companies distributing free software will individually obtain  
patent licenses, thus in effect transforming the program into proprietary software. To  
prevent this, we have made it clear that any patent must be licensed for everyone’s free  
use or not licensed at all.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED  
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER  
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS  
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING  
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE  
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA  
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR  
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH  
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY  
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Most GNU software, including some libraries, is covered by the ordinary GNU General  
Public License, which was designed for utility programs. This license, the GNU Library  
General Public License, applies to certain designated libraries. This license is quite  
different from the ordinary one; be sure to read it in full, and don’t assume that anything  
in it is the same as in the ordinary license.  
The reason we have a separate public license for some libraries is that they blur the  
distinction we usually make between modifying or adding to a program and simply  
using it. Linking a program with a library, without changing the library, is in some  
sense simply using the library, and is analogous to running a utility program or  
application program. However, in a textual and legal sense, the linked executable is a  
combined work, a derivative of the original library, and the ordinary General Public  
License treats it as such.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the  
public, we recommend making it free software that everyone can redistribute and  
change. You can do so by permitting redistribution under these terms (or, alternatively,  
under the terms of the ordinary General Public License).  
Because of this blurred distinction, using the ordinary General Public License for  
libraries did not effectively promote software sharing, because most developers did not  
use the libraries. We concluded that weaker conditions might promote sharing better.  
However, unrestricted linking of non-free programs would deprive the users of those  
programs of all benefit from the free status of the libraries themselves. This Library  
General Public License is intended to permit developers of non-free programs to use  
free libraries, while preserving your freedom as a user of such programs to change the  
free libraries that are incorporated in them. (We have not seen how to achieve this as  
regards changes in header files, but we have achieved it as regards changes in the actual  
functions of the Library.) The hope is that this will lead to faster development of free  
libraries.  
To apply these terms, attach the following notices to the library. It is safest to attach  
them to the start of each source file to most effectively convey the exclusion of  
warranty; and each file should have at least the “copyright” line and a pointer to where  
the full notice is found.  
<one line to give the library’s name and a brief idea of what it does.> Copyright ©  
<year> <name of author>  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The precise terms and conditions for copying, distribution and modification follow. Pay  
close attention to the difference between a “work based on the library” and a “work that  
uses the library”. The former contains code derived from the library, while the latter  
only works together with the library.  
5. A program that contains no derivative of any portion of the Library, but is designed  
to work with the Library by being compiled or linked with it, is called a “work that uses  
the Library”. Such a work, in isolation, is not a derivative work of the Library, and  
therefore falls outside the scope of this License.  
Note that it is possible for a library to be covered by the ordinary General Public  
License rather than by this special one.  
However, linking a “work that uses the Library” with the Library creates an executable  
that is a derivative of the Library (because it contains portions of the Library), rather  
than a “work that uses the library”. The executable is therefore covered by this License.  
Section 6 states terms for distribution of such executables.  
GNU LIBRARY GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
When a “work that uses the Library” uses material from a header file that is part of the  
Library, the object code for the work may be a derivative work of the Library even  
though the source code is not. Whether this is true is especially significant if the work  
can be linked without the Library, or if the work is itself a library. The threshold for this  
to be true is not precisely defined by law.  
0. This License Agreement applies to any software library which contains a notice  
placed by the copyright holder or other authorized party saying it may be distributed  
under the terms of this Library General Public License (also called “this License”).  
Each licensee is addressed as “you”.  
If such an object file uses only numerical parameters, data structure layouts and  
accessors, and small macros and small inline functions (ten lines or less in length), then  
the use of the object file is unrestricted, regardless of whether it is legally a derivative  
work. (Executables containing this object code plus portions of the Library will still fall  
under Section 6.)  
A “library” means a collection of software functions and/or data prepared so as to be  
conveniently linked with application programs (which use some of those functions and  
data) to form executables.  
The “Library”, below, refers to any such software library or work which has been  
distributed under these terms. A “work based on the Library” means either the Library  
or any derivative work under copyright law: that is to say, a work containing the  
Library or a portion of it, either verbatim or with modifications and/or translated  
straightforwardly into another language. (Hereinafter, translation is included without  
limitation in the term “modification”.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code  
for the work under the terms of Section 6. Any executables containing that work also  
fall under Section 6, whether or not they are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also compile or link a “work that  
uses the Library” with the Library to produce a work containing portions of the Library,  
and distribute that work under terms of your choice, provided that the terms permit  
modification of the work for the customer’s own use and reverse engineering for  
debugging such modifications.  
“Source code” for a work means the preferred form of the work for making  
modifications to it. For a library, complete source code means all the source code for all  
modules it contains, plus any associated interface definition files, plus the scripts used  
to control compilation and installation of the library.  
You must give prominent notice with each copy of the work that the Library is used in  
it and that the Library and its use are covered by this License. You must supply a copy  
of this License. If the work during execution displays copyright notices, you must  
include the copyright notice for the Library among them, as well as a reference  
directing the user to the copy of this License. Also, you must do one of these things:  
Activities other than copying, distribution and modification are not covered by this  
License; they are outside its scope. The act of running a program using the Library is  
not restricted, and output from such a program is covered only if its contents constitute  
a work based on the Library (independent of the use of the Library in a tool for writing  
it). Whether that is true depends on what the Library does and what the program that  
uses the Library does.  
a) Accompany the work with the complete corresponding machine-readable source  
code for the Library including whatever changes were used in the work (which must be  
distributed under Sections 1 and 2 above); and, if the work is an executable linked with  
the Library, with the complete machine-readable “work that uses the Library”, as object  
code and/or source code, so that the user can modify the Library and then relink to  
produce a modified executable containing the modified Library. (It is understood that  
the user who changes the contents of definitions files in the Library will not necessarily  
be able to recompile the application to use the modified definitions.)  
1. You may copy and distribute verbatim copies of the Library’s complete source code  
as you receive it, in any medium, provided that you conspicuously and appropriately  
publish on each copy an appropriate copyright notice and disclaimer of warranty; keep  
intact all the notices that refer to this License and to the absence of any warranty; and  
distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your  
option offer warranty protection in exchange for a fee.  
b) Accompany the work with a written offer, valid for at least three years, to give the  
same user the materials specified in Subsection 6a, above, for a charge no more than the  
cost of performing this distribution.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming  
a work based on the Library, and copy and distribute such modifications or work under  
the terms of Section 1 above, provided that you also meet all of these conditions:  
c) If distribution of the work is made by offering access to copy from a designated  
place, offer equivalent access to copy the above specified materials from the same place  
a) The modified work must itself be a software library.  
d) Verify that the user has already received a copy of these materials or that you have  
already sent this user a copy.  
b) You must cause the files modified to carry prominent notices stating that you  
changed the files and the date of any change.  
For an executable, the required form of the “work that uses the Library” must include  
any data and utility programs needed for reproducing the executable from it. However,  
as a special exception, the source code distributed need not include anything that is  
normally distributed (in either source or binary form) with the major components  
(compiler, kernel, and so on) of the operating system on which the executable runs,  
unless that component itself accompanies the executable.  
c) You must cause the whole of the work to be licensed at no charge to all third parties  
under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be  
supplied by an application program that uses the facility, other than as an argument  
passed when the facility is invoked, then you must make a good faith effort to ensure  
that, in the event an application does not supply such function or table, the facility still  
operates, and performs whatever part of its purpose remains meaningful.  
It may happen that this requirement contradicts the license restrictions of other  
proprietary libraries that do not normally accompany the operating system. Such a  
contradiction means you cannot use both them and the Library together in an executable  
that you distribute.  
(For example, a function in a library to compute square roots has a purpose that is  
entirely well-defined independent of the application. Therefore, Subsection 2d requires  
that any application-supplied function or table used by this function must be optional: if  
the application does not supply it, the square root function must still compute square  
roots.)  
7. You may place library facilities that are a work based on the Library side-by-side in a  
single library together with other library facilities not covered by this License, and  
distribute such a combined library, provided that the separate distribution of the work  
based on the Library and of the other library facilities is otherwise permitted, and  
provided that you do these two things:  
These requirements apply to the modified work as a whole. If identifiable sections of  
that work are not derived from the Library, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do not  
apply to those sections when you distribute them as separate works. But when you  
distribute the same sections as part of a whole which is a work based on the Library, the  
distribution of the whole must be on the terms of this License, whose permissions for  
other licensees extend to the entire whole, and thus to each and every part regardless of  
who wrote it.  
a) Accompany the combined library with a copy of the same work based on the Library,  
uncombined with any other library facilities. This must be distributed under the terms  
of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work  
based on the Library, and explaining where to find the accompanying uncombined form  
of the same work.  
Thus, it is not the intent of this section to claim rights or contest your rights to work  
written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Library.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as  
expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense, link with, or distribute the Library is void, and will automatically terminate  
your rights under this License. However, parties who have received copies, or rights,  
from you under this License will not have their licenses terminated so long as such  
parties remain in full compliance.  
In addition, mere aggregation of another work not based on the Library with the Library  
(or with a work based on the Library) on a volume of a storage or distribution medium  
does not bring the other work under the scope of this License.  
9. You are not required to accept this License, since you have not signed it. However,  
nothing else grants you permission to modify or distribute the Library or its derivative  
works. These actions are prohibited by law if you do not accept this License. Therefore,  
by modifying or distributing the Library (or any work based on the Library), you  
indicate your acceptance of this License to do so, and all its terms and conditions for  
copying, distributing or modifying the Library or works based on it.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead  
of this License to a given copy of the Library. To do this, you must alter all the notices  
that refer to this License, so that they refer to the ordinary GNU General Public License,  
version 2, instead of to this License. (If a newer version than version 2 of the ordinary  
GNU General Public License has appeared, then you can specify that version instead if  
you wish.) Do not make any other change in these notices.  
10. Each time you redistribute the Library (or any work based on the Library), the  
recipient automatically receives a license from the original licensor to copy, distribute,  
link with or modify the Library subject to these terms and conditions. You may not  
impose any further restrictions on the recipients’ exercise of the rights granted herein.  
You are not responsible for enforcing compliance by third parties to this License.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary  
GNU General Public License applies to all subsequent copies and derivative works  
made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a  
program that is not a library.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for  
any other reason (not limited to patent issues), conditions are imposed on you (whether  
by court order, agreement or otherwise) that contradict the conditions of this License,  
they do not excuse you from the conditions of this License. If you cannot distribute so  
as to satisfy simultaneously your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the Library at all. For  
example, if a patent license would not permit royalty-free redistribution of the Library  
by all those who receive copies directly or indirectly through you, then the only way  
you could satisfy both it and this License would be to refrain entirely from distribution  
of the Library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under  
Section 2) in object code or executable form under the terms of Sections 1 and 2 above  
provided that you accompany it with the complete corresponding machine-readable  
source code, which must be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated  
place, then offering equivalent access to copy the source code from the same place  
satisfies the requirement to distribute the source code, even though third parties are not  
compelled to copy the source along with the object code.  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply, and the section as a whole  
is intended to apply in other circumstances.  
viii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
It is not the purpose of this section to induce you to infringe any patents or other  
property right claims or to contest validity of any such claims; this section has the sole  
purpose of protecting the integrity of the free software distribution system which is  
implemented by public license practices. Many people have made generous  
contributions to the wide range of software distributed through that system in reliance  
on consistent application of that system; it is up to the author/donor to decide if he or  
she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
About bison_parser  
Conditions for Using Bison  
The distribution terms for Bison-generated parsers permit using the parsers in nonfree  
programs. Before Bison version 2.2, these extra permissions applied only when Bison  
was generating LALR(1) parsers in C. And before Bison version 1.24, Bison-generated  
parsers could be used only in programs that were free software.  
The other GNU programming tools, such as the GNU C compiler, have never had such  
a requirement. They could always be used for nonfree software. The reason Bison was  
different was not due to a special policy decision; it resulted from applying the usual  
General Public License to all of the Bison source code.  
This section is intended to make thoroughly clear what is believed to be a consequence  
of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by  
patents or by copyrighted interfaces, the original copyright holder who places the  
Library under this License may add an explicit geographical distribution limitation  
excluding those countries, so that distribution is permitted only in or among countries  
not thus excluded. In such case, this License incorporates the limitation as if written in  
the body of this License.  
The main output of the Bison utility?the Bison parser implementation file?contains a  
verbatim copy of a sizable piece of Bison, which is the code for the parser’s  
implementation. (The actions from your grammar are inserted into this implementation  
at one point, but most of the rest of the implementation is not changed.) When we  
applied the GPL terms to the skeleton code for the parser’s implementation, the effect  
was to restrict the use of Bison output to free software.  
13. The Free Software Foundation may publish revised and/or new versions of the  
Library General Public License from time to time. Such new versions will be similar in  
spirit to the present version, but may differ in detail to address new problems or  
concerns.  
We didn’t change the terms because of sympathy for people who want to make software  
proprietary. Software should be free. But we concluded that limiting Bison’s use to free  
software was doing little to encourage people to make other software free. So we  
decided to make the practical conditions for using Bison match the practical conditions  
for using the other GNU tools.  
Each version is given a distinguishing version number. If the Library specifies a version  
number of this License which applies to it and “any later version”, you have the option  
of following the terms and conditions either of that version or of any later version  
published by the Free Software Foundation. If the Library does not specify a license  
version number, you may choose any version ever published by the Free Software  
Foundation.  
This exception applies when Bison is generating code for a parser. You can tell whether  
the exception applies to a Bison output file by inspecting the file for text beginning with  
“As a special exception...”. The text spells out the exact terms of the exception.  
14. If you wish to incorporate parts of the Library into other free programs whose  
distribution conditions are incompatible with these, write to the author to ask for  
permission. For software which is copyrighted by the Free Software Foundation, write  
to the Free Software Foundation; we sometimes make exceptions for this. Our decision  
will be guided by the two goals of preserving the free status of all derivatives of our free  
software and of promoting the sharing and reuse of software generally.  
About cURL, libcurl  
COPYRIGHT AND PERMISSION NOTICE  
Copyright © 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
NO WARRANTY  
Permission to use, copy, modify, and distribute this software for any purpose with or  
without fee is hereby granted, provided that the above copyright notice and this  
permission notice appear in all copies.  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO  
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE  
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY  
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE  
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY  
IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO  
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR  
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION  
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN  
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN  
THE SOFTWARE.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO  
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO  
MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED  
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF  
THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT  
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR  
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH  
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Except as contained in this notice, the name of a copyright holder shall not be used in  
advertising or otherwise to promote the sale, use or other dealings in this Software  
without prior written authorization of the copyright holder.  
About c-ares  
Copyright 1998 by the Massachusetts Institute of Technology.  
Permission to use, copy, modify, and distribute this software and its documentation for  
any purpose and without fee is hereby granted, provided that the above copyright notice  
appear in all copies and that both that copyright notice and this permission notice  
appear in supporting documentation, and that the name of M.I.T. not be used in  
advertising or publicity pertaining to distribution of the software without specific,  
written prior permission.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the  
public, we recommend making it free software that everyone can redistribute and  
change. You can do so by permitting redistribution under these terms (or, alternatively,  
under the terms of the ordinary General Public License).  
M.I.T. makes no representations about the suitability of this software for any purpose. It  
is provided “as is” without express or implied warranty.  
About Expat  
To apply these terms, attach the following notices to the library. It is safest to attach  
them to the start of each source file to most effectively convey the exclusion of  
warranty; and each file should have at least the “copyright” line and a pointer to where  
the full notice is found.  
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd  
and Clark Cooper  
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.  
<one line to give the library’s name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
Permission is hereby granted, free of charge, to any person obtaining a copy of this  
software and associated documentation files (the “Software”), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge,  
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons  
to whom the Software is furnished to do so, subject to the following conditions:  
This library is free software; you can redistribute it and/or modify it under the terms of  
the GNU Library General Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your option) any later version.  
The above copyright notice and this permission notice shall be included in all copies or  
substantial portions of the Software.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY  
WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public  
License for more details.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS  
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR  
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
You should have received a copy of the GNU Library General Public License along  
with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St,  
Fifth Floor, Boston, MA 02110-1301, USA.  
Also add information on how to contact you by electronic and paper mail.  
About libxml2  
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio  
files, which are covered by a similar licence but with different Copyright notices) all the  
files are:  
You should also get your employer (if you work as a programmer) or your school, if  
any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter  
the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library  
for tweaking knobs) written by James Random Hacker.  
Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
Permission is hereby granted, free of charge, to any person obtaining a copy of this  
software and associated documentation files (the “Software”), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge,  
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons  
to whom the Software is furnished to do so, subject to the following conditions:  
That’s all there is to it!  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The above copyright notice and this permission notice shall be included in all copies or  
substantial portions of the Software.  
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY EXPRESS OR  
IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR  
LUCENT MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND  
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS  
FITNESS FOR ANY PARTICULAR PURPOSE.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL  
VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING  
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR  
OTHER DEALINGS IN THE SOFTWARE.  
About EMX_sprintf_sscanf  
The emx libraries are not distributed under the GPL. Linking an application with the  
emx libraries does not cause the executable to be covered by the GNU General Public  
License. You are allowed to change and copy the emx library sources if you keep the  
copyright message intact. If you improve the emx libraries, please send your  
enhancements to the emx author (you should copyright your enhancements similar to  
the existing emx libraries).  
Except as contained in this notice, the name of Daniel Veillard shall not be used in  
advertising or otherwise to promote the sale, use or other dealings in this Software  
without prior written authorization from him.  
About NTP  
About Lua  
Copyright © University of Delaware 1992-2012  
The MIT License (MIT)  
Permission to use, copy, modify, and distribute this software andits documentation for  
any purpose with or without fee is hereby granted, provided that the above copyright  
notice appears in all copies and that both the copyright notice and this permission notice  
appear in supporting documentation, and that the name University of Delaware not be  
used in advertising or publicity pertaining to distribution of the software without  
specific, written prior permission. The University of Delaware makes no  
representations about the suitability this software for any purpose. It is provided “as is”  
without express or implied warranty.  
Copyright ©1994-2013 Lua.org, PUC-Rio.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this  
software and associated documentation files (the “Software”), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge,  
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons  
to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or  
substantial portions of the Software.  
About tcpdump  
License: BSD  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS  
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR  
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list  
of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
About ncurses  
3. The names of the authors may not be used to endorse or promote products derived  
from this software without specific prior written permission.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS  
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR  
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR  
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE.  
About tinyxml  
Copyright © 1998-2000,2006 Free Software Foundation, Inc.  
Original code (2.0 and earlier )copyright © 2000-2006 Lee Thomason  
(www.grinninglizard.com)  
Permission is hereby granted, free of charge, to any person obtaining acopy of this  
software and associated documentation files (the”Software”), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge,  
publish,-- distribute, distribute with modifications, sublicense, and/or sell copies of the  
Software, and to permit persons to whom the Software is furnished to do so, subject to  
the following conditions:  
This software is provided ‘as-is’, without any express or implied warranty. In no event  
will the authors be held liable for any damages arising from the use of this software.  
Permission is granted to anyone to use this software for any purpose, including  
commercial applications, and to alter it and redistribute it freely, subject to the  
following restrictions:  
The above copyright notice and this permission notice shall be included in all copies or  
substantial portions of the Software.  
1. The origin of this software must not be misrepresented; you must not claim that you  
wrote the original software. If you use this software in a product, an  
acknowledgment in the product documentation would be appreciated but is not  
required.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE  
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
2. Altered source versions must be plainly marked as such, and must not be  
misrepresented as being the original software.  
3. This notice may not be removed or altered from any source distribution.  
Except as contained in this notice, the name(s) of the above copyright holders shall not  
be used in advertising or otherwise to promote the sale, use or other dealings in this  
Software without prior written authorization.  
About dmalloc  
This is a version (aka dlmalloc) of malloc/free/realloc written by Doug Lea and released  
publicdomain. Send questions,comments, complaints, performance data, etc to  
About popt  
Copyright © 1998 Red Hat Software  
THIS SOFTWARE IS PROVIDED BY THE CRYPTIX FOUNDATION LIMITED  
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE CRYPTIX  
FOUNDATION LIMITED OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF  
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGE.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this  
software and associated documentation files (the “Software”), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge,  
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons  
to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or  
substantial portions of the Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X  
CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
About DMG’s dtoa and strtod  
The author of this software is David M. Gay.  
Except as contained in this notice, the name of the X Consortium shall not be used in  
advertising or otherwise to promote the sale, use or other dealings in this Software  
without prior written authorization from the X Consortium.  
Copyright © 1991, 2000, 2001 by Lucent Technologies.  
Permission to use, copy, modify, and distribute this software for any purpose without  
fee is hereby granted, provided that this entire notice is included in all copies of any  
software which is or includes a copy or modification of this software and in all copies  
of the supporting documentation for such software.  
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. The origin of this software must not be misrepresented; you must not claim that you  
wrote the original software. If you use this software in a product, an  
acknowledgment in the product documentation would be appreciated but is not  
required.  
About protobuf  
Copyright © 2008, Google Inc. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
2. Altered source versions must be plainly marked as such, and must not be  
misrepresented as being the original software.  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
3. This notice may not be removed or altered from any source distribution.  
2. Redistributions in binary form must reproduce the above copyright notice, this list  
of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
Jean-loup Gailly  
Mark Adler  
If you use the zlib library in a product, we would appreciate *not* receiving lengthy  
legal documents to sign. The sources are provided for free but without warranty of any  
kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does  
not include third-party code.  
3. Neither the name of Google Inc. nor the names of its contributors may be used to  
endorse or promote products derived from this software without specific prior  
written permission.  
If you redistribute modified sources, we would appreciate that you include in the file  
ChangeLog history information documenting your changes. Please read the FAQ for  
more information on the distribution of modified source versions.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND  
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT  
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
About 3DES  
3DES  
Des3Cipher - the triple-DES encryption method  
Copyright © 1996 by Jef Poskanzer <[email protected]>. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list  
of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
Code generated by the Protocol Buffer compiler is owned by the owner of the input file  
used when generating it. This code is not standalone and requires a support library to  
be linked with it. This support library is itself covered by the above license.  
About UnZip  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS “AS  
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF  
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGE.  
Copyright © 1990-2009 Info-ZIP. All rights reserved.  
For the purposes of this copyright and license, “Info-ZIP” is defined as the following  
set of individuals:  
Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup  
Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg  
Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny  
Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith  
Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith,  
Steven M. Schweda, Christian Spieler, Cosmin Truta, Antoine Verheijen, Paul von  
Behren, Rich Wales, Mike White.  
This software is provided “as is,” without warranty of any kind, express or implied. In  
no event shall Info-ZIP or its contributors be held liable for any direct, indirect,  
incidental, special or consequential damages arising out of the use of or inability to use  
this software.  
Visit the ACME Labs Java page for up-to-date versions of this and other fine Java  
About AES  
Permission is granted to anyone to use this software for any purpose, including  
commercial applications, and to alter it and redistribute it freely, subject to the above  
disclaimer and the following restrictions:  
Cryptix General License  
Copyright © 1995-2005 The Cryptix Foundation Limited. All rights reserved.  
1. Redistributions of source code (in whole or in part) must retain the above copyright  
notice, definition, disclaimer, and this list of conditions.  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
2. Redistributions in binary form (compiled executables and libraries) must reproduce  
the above copyright notice, definition, disclaimer, and this list of conditions in  
documentation and/or other materials provided with the distribution. Additional  
documentation is not needed for executables where a command line license option  
provides these and a note regarding this option is in the executable’s startup banner.  
The sole exception to this condition is redistribution of a standard UnZipSFX  
binary (including SFXWiz) as part of a self-extracting archive; that is permitted  
without inclusion of this license, as long as the normal SFX banner has not been  
removed from the binary or disabled.  
1. Redistributions of source code must retain the copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list  
of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
About DES  
DES  
3. Altered versions--including, but not limited to, ports to new operating systems,  
existing ports with new graphical interfaces, versions with modified or added  
functionality, and dynamic, shared, or static library versions not from Info-ZIP--  
must be plainly marked as such and must not be misrepresented as being the  
original source or, if binaries, compiled from the original source. Such altered  
versions also must not be misrepresented as being Info-ZIP releases--including, but  
not limited to, labeling of the altered versions with the names “Info-ZIP” (or any  
variation thereof, including, but not limited to, different capitalizations), “Pocket  
UnZip,” “WiZ” or “MacZip” without the explicit permission of Info-ZIP. Such  
altered versions are further prohibited from misrepresentative use of the Zip-Bugs  
or Info-ZIP e-mail addresses or the Info-ZIP URL(s), such as to imply Info-ZIP  
will provide support for the altered versions.  
DesCipher - the DES encryption method  
The meat of this code is by Dave Zimmerman <[email protected]>, and is:  
Copyright © 1996 Widget Workshop, Inc. All Rights Reserved.  
Permission to use, copy, modify, and distribute this software and its documentation for  
NON-COMMERCIAL or COMMERCIAL purposes and without fee is hereby granted,  
provided that this copyright notice is kept intact.  
WIDGET WORKSHOP MAKES NO REPRESENTATIONS OR WARRANTIES  
ABOUT THE SUITABILITY OF THE SOFTWARE, EITHER EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-  
INFRINGEMENT. WIDGET WORKSHOP SHALL NOT BE LIABLE FOR ANY  
DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING  
OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  
4. Info-ZIP retains the right to use the names “Info-ZIP,” “Zip,” “UnZip,”  
“UnZipSFX,” “WiZ,” “Pocket UnZip,” “Pocket Zip,” and “MacZip” for its own  
source and binary releases.  
THIS SOFTWARE IS NOT DESIGNED OR INTENDED FOR USE OR RESALE AS  
ON-LINE CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS  
REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF  
NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION  
SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE SUPPORT MACHINES, OR  
WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THE SOFTWARE COULD  
LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL  
OR ENVIRONMENTAL DAMAGE (“HIGH RISK ACTIVITIES”). WIDGET  
WORKSHOP SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED  
WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.  
About zlib  
Copyright notice:  
© 1995-2004 Jean-loup Gailly and Mark Adler  
This software is provided ‘as-is’, without any express or implied warranty. In no event  
will the authors be held liable for any damages arising from the use of this software.  
Permission is granted to anyone to use this software for any purpose, including  
commercial applications, and to alter it and redistribute it freely, subject to the  
following restrictions:  
The rest of the code is:  
Copyright © 1996 by Jef Poskanzer <[email protected]>. All rights reserved.  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
3. All advertising materials mentioning features or use of this software must display  
the following acknowledgement:  
“This product includes cryptographic software written by Eric Young  
([email protected])” The word ‘cryptographic’ can be left out if the rouines from  
the library being used are not cryptographic related :-).  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of  
conditions and the following disclaimer in the documentation and/or other materials  
provided with the distribution.  
4. If you include any Windows specific code (or a derivative thereof) from the apps  
directory (application code) you must include an acknowledgement:  
“This product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS “AS  
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF  
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGE.  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS  
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE  
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE  
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
The licence and distribution terms for any publically available version or derivative of  
this code cannot be changed. i.e. this code cannot simply be copied and put under  
another distribution licence [including the GNU Public Licence.]  
Visit the ACME Labs Java page for up-to-date versions of this and other fine Java  
About OpenSSL  
About WPA Supplicant, WPA Supplicant (WPS)  
WPA Supplicant  
Copyright © 1998-2008 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
Copyright © 2003-2012, Jouni Malinen <[email protected]> and contributors  
All Rights Reserved.  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
This program is licensed under the BSD license (the one with advertisement clause  
removed).  
2. 2. Redistributions in binary form must reproduce the above copyright notice, this  
list of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
If you are submitting changes to the project, please see CONTRIBUTIONS file for  
more instructions.  
License  
3. All advertising materials mentioning features or use of this software must display  
the following acknowledgment:  
“This product includes software developed by the OpenSSL Project for use in the  
OpenSSL Toolkit. (http://www.openssl.org/)”  
This software may be distributed, used, and modified under the terms of BSD license:  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to  
endorse or promote products derived from this software without prior written  
permission. For written permission, please contact [email protected].  
2. Redistributions in binary form must reproduce the above copyright notice, this list of  
conditions and the following disclaimer in the documentation and/or other materials  
provided with the distribution.  
5. Products derived from this software may not be called “OpenSSL” nor may  
“OpenSSL” appear in their names without prior written permission of the OpenSSL  
Project.  
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its  
contributors may be used to endorse or promote products derived from this software  
without specific prior written permission.  
6. Redistributions of any form whatsoever must retain the following  
acknowledgment:  
‘This product includes software developed by the OpenSSL Project for use in the  
OpenSSL Toolkit (http://www.openssl.org/)”  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND  
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT  
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY  
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE  
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF  
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGE.  
About FreeType  
The FreeType Project LICENSE  
2006-Jan-27  
This product includes cryptographic software written by Eric Young  
([email protected]). This product includes software written by Tim Hudson  
Copyright 1996-2002, 2006 by  
David Turner, Robert Wilhelm, and Werner Lemberg  
Original SSLeay License  
Introduction  
Copyright © 1995-1998 Eric Young ([email protected]) All rights reserved.  
The FreeType Project is distributed in several archive packages; some of them may  
contain, in addition to the FreeType font engine, various tools and contributions which  
rely on, or relate to, the FreeType Project.  
This package is an SSL implementation written by Eric Young ([email protected]).  
The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following  
conditions are aheared to. The following conditions apply to all code found in this  
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The  
SSL documentation included with this distribution is covered by the same copyright  
terms except that the holder is Tim Hudson ([email protected]).  
This license applies to all files found in such packages, and which do not fall under their  
own explicit license. The license affects thus the FreeType font engine, the test  
programs, documentation and makefiles, at the very least.  
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group)  
licenses, which all encourage inclusion and use of free software in commercial and  
freeware products alike. As a consequence, its main points are that:  
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not  
to be removed. If this package is used in a product, Eric Young should be given  
attribution as the author of the parts of the library used. This can be in the form of a  
textual message at program startup or in documentation (online or textual) provided  
with the package.  
– We don’t promise that this software works. However, we will be interested in any  
kind of bug reports. (‘as is’ distribution)  
– You can use this software for whatever you want, in parts or full form, without  
having to pay us. (‘royalty-free’ usage)  
– You may not pretend that you wrote this software. If you use it, or only parts of it, in  
a program, you must acknowledge somewhere in your documentation that you have  
used the FreeType code. (‘credits’)  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list  
of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
We specifically permit and encourage the inclusion of this software, with or without  
modifications, in commercial products. We disclaim all warranties covering The  
FreeType Project and assume no liability related to The FreeType Project.  
Finally, many people asked us for a preferred form for a credit/disclaimer to use in  
compliance with this license. We thus encourage you to use the following text:  
Portions of this software are copyright © <year> The FreeType Project  
xii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please replace <year> with the value from the FreeType version you actually use.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF  
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,  
TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE  
GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL,  
OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT,  
TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO  
USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT  
SOFTWARE.  
Legal Terms  
0. Definitions  
Throughout this license, the terms ‘package’, ‘FreeType Project’, and ‘FreeType  
archive’ refer to the set of files originally distributed by the authors (David Turner,  
Robert Wilhelm, and Werner Lemberg) as the ‘FreeType Project’, be they named as  
alpha, beta or final release.  
‘You’ refers to the licensee, or person using the project, where ‘using’ is a generic term  
including compiling the project’s source code as well as linking it to form a ‘program’  
or ‘executable’. This program is referred to as ‘a program using the FreeType engine’.  
Except as contained in this notice, the names of Gnome, the Gnome Foundation, and  
Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or  
other dealings in this Font Software without prior written authorization from the Gnome  
Foundation or Bitstream Inc., respectively. For further information, contact: fonts at  
gnome dot org.  
This license applies to all files distributed in the original FreeType Project, including  
all source code, binaries and documentation, unless otherwise stated in the file in its  
original, unmodified form as distributed in the original archive. If you are unsure  
whether or not a particular file is covered by this license, you must contact us to verify  
this.  
Arev Fonts Copyright  
The FreeType Project is copyright © 1996-2000 by David Turner, Robert Wilhelm, and  
Werner Lemberg. All rights reserved except as specified below.  
Copyright © 2006 by Tavmjong Bah. All Rights Reserved.  
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts  
accompanying this license (“Fonts”) and associated documentation files (the “Font  
Software”), to reproduce and distribute the modifications to the Bitstream Vera Font  
Software, including without limitation the rights to use, copy, merge, publish,  
distribute, and/or sell copies of the Font Software, and to permit persons to whom the  
Font Software is furnished to do so, subject to the following conditions:  
1. No Warranty  
THE FREETYPE PROJECT IS PROVIDED ‘AS IS’ WITHOUT WARRANTY OF  
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED  
TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR  
COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE  
USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.  
The above copyright and trademark notices and this permission notice shall be included  
in all copies of one or more of the Font Software typefaces.  
The Font Software may be modified, altered, or added to, and in particular the designs  
of glyphs or characters in the Fonts may be modified and additional glyphs or  
characters may be added to the Fonts, only if the fonts are renamed to names not  
containing either the words “Tavmjong Bah” or the word “Arev”.  
2. Redistribution  
This license grants a worldwide, royalty-free, perpetual and irrevocable right and  
license to use, execute, perform, compile, display, copy, create derivative works of,  
distribute and sublicense the FreeType Project (in both source and object code forms)  
and derivative works thereof for any purpose; and to authorize others to exercise some  
or all of the rights granted herein, subject to the following conditions:  
This License becomes null and void to the extent applicable to Fonts or Font Software  
that has been modified and is distributed under the “Tavmjong Bah Arev” names.  
– Redistribution of source code must retain this license file (‘FTL.TXT’) unaltered;  
The Font Software may be sold as part of a larger software package but no copy of one  
or more of the Font Software typefaces may be sold by itself.  
any additions, deletions or changes to the original files must be clearly indicated in  
accompanying documentation. The copyright notices of the unaltered, original files  
must be preserved in all copies of source files.  
– Redistribution in binary form must provide a disclaimer that states that the software  
is based in part of the work of the FreeType Team, in the distribution documentation.  
We also encourage you to put an URL to the FreeType web page in your  
documentation, though this isn’t mandatory.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF  
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,  
TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE  
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING  
ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE  
FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.  
These conditions apply to any software derived from or based on the FreeType Project,  
not just the unmodified files. If you use our work, you must acknowledge us. However,  
no fee need be paid to us.  
Except as contained in this notice, the name of Tavmjong Bah shall not be used in  
advertising or otherwise to promote the sale, use or other dealings in this Font Software  
without prior written authorization from Tavmjong Bah. For further information,  
contact: tavmjong@free. fr.  
3. Advertising  
Neither the FreeType authors and contributors nor you shall use the name of the other  
for commercial, advertising, or promotional purposes without specific prior written  
permission.  
About International Components for Unicode  
We suggest, but do not require, that you use one or more of the following phrases to  
refer to this software in your documentation or advertising materials: ‘FreeType  
Project’, ‘FreeType Engine’, ‘FreeType library’, or ‘FreeType Distribution’.  
ICU License - ICU 1.8.1 and later  
COPYRIGHT AND PERMISSION NOTICE  
As you have not signed this license, you are not required to accept it. However, as the  
FreeType Project is copyrighted material, only this license, or another one contracted  
with the authors, grants you the right to use, distribute, and modify it. Therefore, by  
using, distributing, or modifying the FreeType Project, you indicate that you understand  
and accept all the terms of this license.  
Copyright © 1995-2003 International Business Machines Corporation and others  
All rights reserved.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this  
software and associated documentation files (the “Software”), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge,  
publish, distribute, and/or sell copies of the Software, and to permit persons to whom  
the Software is furnished to do so, provided that the above copyright notice(s) and this  
permission notice appear in all copies of the Software and that both the above copyright  
notice(s) and this permission notice appear in supporting documentation.  
4. Contacts  
There are two mailing lists related to FreeType:  
Discusses general use and applications of FreeType, as well as future and wanted  
additions to the library and distribution. If you are looking for support, start in this list if  
you haven’t found anything to help you in the documentation.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO  
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS  
NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR  
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER  
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN  
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE  
OF THIS SOFTWARE.  
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.  
Our home page can be found at  
About fonts  
Fonts are © Bitstream (see below). DejaVu changes are in public domain.  
Except as contained in this notice, the name of a copyright holder shall not be used in  
advertising or otherwise to promote the sale, use or other dealings in this Software  
without prior written authorization of the copyright holder.  
Glyphs imported from Arev fonts are © Tavmjong Bah (see below)  
Bitstream Vera Fonts Copyright  
Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a  
trademark of Bitstream, Inc.  
All trademarks and registered trademarks mentioned herein are the property of their  
respective owners.  
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts  
accompanying this license (“Fonts”) and associated documentation files (the “Font  
Software”), to reproduce and distribute the Font Software, including without limitation  
the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font  
Software, and to permit persons to whom the Font Software is furnished to do so,  
subject to the following conditions:  
About Independent JPEG Group’s software, libjpeg  
In plain English:  
1. We don’t promise that this software works. (But if you find any bugs, please let us  
know!)  
The above copyright and trademark notices and this permission notice shall be included  
in all copies of one or more of the Font Software typefaces.  
2. You can use this software for whatever you want. You don’t have to pay us.  
The Font Software may be modified, altered, or added to, and in particular the designs  
of glyphs or characters in the Fonts may be modified and additional glyphs or  
characters may be added to the Fonts, only if the fonts are renamed to names not  
containing either the words “Bitstream” or the word “Vera”.  
3. You may not pretend that you wrote this software. If you use it in a program, you  
must acknowledge somewhere in your documentation that you’ve used the IJG code.  
In legalese:  
The authors make NO WARRANTY or representation, either express or implied, with  
respect to this software, its quality, accuracy, merchantability, or fitness for a particular  
purpose. This software is provided “AS IS”, and you, its user, assume the entire risk as  
to its quality and accuracy.  
This License becomes null and void to the extent applicable to Fonts or Font Software  
that has been modified and is distributed under the “Bitstream Vera” names.  
The Font Software may be sold as part of a larger software package but no copy of one  
or more of the Font Software typefaces may be sold by itself.  
This software is copyright © 1991-2009, Thomas G. Lane, Guido Vollbeding.  
xiii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All Rights Reserved except as specified below.  
For the purposes of this copyright and license, “Contributing Authors” is defined as the  
following set of individuals:  
Permission is hereby granted to use, copy, modify, and distribute this software (or  
portions thereof) for any purpose, without fee, subject to these conditions:  
Andreas Dilger  
Dave Martindale  
Guy Eric Schalnat  
Paul Schmidt  
(1) If any part of the source code for this software is distributed, then this README file  
must be included, with this copyright and no-warranty notice unaltered; and any  
additions, deletions, or changes to the original files must be clearly indicated in  
accompanying documentation.  
(2) If only executable code is distributed, then the accompanying documentation must  
state that “this software is based in part on the work of the Independent JPEG Group”.  
Tim Wegner  
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group  
42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the  
warranties of merchantability and of fitness for any purpose. The Contributing Authors  
and Group 42, Inc. assume no liability for direct, indirect, incidental, special,  
exemplary, or consequential damages, which may result from the use of the PNG  
Reference Library, even if advised of the possibility of such damage.  
(3) Permission for use of this software is granted only if the user accepts full  
responsibility for any undesirable consequences; the authors accept NO LIABILITY for  
damages of any kind.  
These conditions apply to any software derived from or based on the IJG code, not just  
to the unmodified library. If you use our work, you ought to acknowledge us.  
Permission is NOT granted for the use of any IJG author’s name or company name in  
advertising or publicity relating to this software or products derived from it. This  
software may be referred to only as “the Independent JPEG Group’s software”.  
Permission is hereby granted to use, copy, modify, and distribute this source code, or  
portions hereof, for any purpose, without fee, subject to the following restrictions:  
1. The origin of this source code must not be misrepresented.  
We specifically permit and encourage the use of this software as the basis of  
commercial products, provided that all warranty or liability claims are assumed by the  
product vendor.  
2. Altered versions must be plainly marked as such and must not be misrepresented  
as being the original source.  
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole  
proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is  
NOT covered by the above copyright and conditions, but instead by the usual  
distribution terms of the Free Software Foundation; principally, that you must include  
source code if you redistribute it. (See the file ansi2knr.c for full details.) However,  
since ansi2knr.c is not needed as part of any program generated from the IJG code, this  
does not limit you more than the foregoing paragraphs do.  
3. This Copyright notice may not be removed or altered from any source or altered  
source distribution.  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and  
encourage the use of this source code as a component to supporting the PNG file format  
in commercial products. If you use this source code in a product, acknowledgment is  
not required but would be appreciated.  
The Unix configuration script “configure” was produced with GNU Autoconf. It is  
copyright by the Free Software Foundation but is freely distributable. The same holds  
for its supporting scripts (config.guess, config.sub, ltmain.sh). Another support script,  
install-sh, is copyright by X Consortium but is also freely distributable.  
A “png_get_copyright” function is available, for convenient use in “about” boxes and  
the like:  
printf(“%s”,png_get_copyright(NULL));  
Also, the PNG logo (in PNG format, of course) is supplied in the files “pngbar.png” and  
“pngbar.jpg (88x31) and “pngnow.png” (98x31).  
The IJG distribution formerly included code to read and write GIF files. To avoid  
entanglement with the Unisys LZW patent, GIF reading support has been removed  
altogether, and the GIF writer has been simplified to produce “uncompressed GIFs”.  
This technique does not use the LZW algorithm; the resulting GIF files are larger than  
usual, but are readable by all standard GIF decoders.  
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a  
certification mark of the Open Source Initiative.  
Glenn Randers-Pehrson  
glennrp at users.sourceforge.net  
February 18, 2012  
We are required to state that  
“The Graphics Interchange Format© is the Copyright property of  
CompuServe Incorporated. GIF(sm) is a Service Mark property of  
CompuServe Incorporated.”  
About Apple Lossless Audio Codec  
Copyright © 2011 Apple Inc. All rights reserved.  
About libpng  
This copy of the libpng notices is provided for your convenience. In case of any  
discrepancy between this copy and the notices in the file png.h that is included in the  
libpng distribution, the latter shall prevail.  
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this  
file except in compliance with the License.  
You may obtain a copy of the License at  
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:  
If you modify libpng you may insert additional notices immediately following this  
sentence. This code is released under the libpng license.  
Unless required by applicable law or agreed to in writing, software distributed under the  
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR  
CONDITIONS OF ANY KIND, either express or implied.  
libpng versions 1.2.6, August 15, 2004, through 1.2.47, February 18, 2012, are  
Copyright © 2004, 2006-2009 Glenn Randers-Pehrson, and are distributed according to  
the same disclaimer and license as libpng-1.2.5 with the following individual added to  
the list of Contributing Authors  
See the License for the specific language governing permissions and limitations under  
the License.  
Cosmin Truta  
About FLAC codec library  
Copyright © 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Josh Coalson  
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright  
© 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same  
disclaimer and license as libpng-1.0.6 with the following individuals added to the  
list of Contributing Authors  
Redistribution and use in source and binary forms, with or without modification, are  
permitted provided that the following conditions are met:  
– Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
Simon-Pierre Cadieux  
Eric S. Raymond  
– Redistributions in binary form must reproduce the above copyright notice, this list of  
conditions and the following disclaimer in the documentation and/or other materials  
provided with the distribution.  
Gilles Vollant  
and with the following additions to the disclaimer:  
– Neither the name of the Xiph.org Foundation nor the names of its contributors may  
be used to endorse or promote products derived from this software without specific  
prior written permission.  
There is no warranty against interference with your enjoyment of the library or  
against infringement. There is no warranty that our efforts or the library will fulfill  
any of your particular purposes or needs. This library is provided with all faults,  
and the entire risk of satisfactory quality, performance, accuracy, and effort is with  
the user.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND  
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS  
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS  
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,  
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright ©  
1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same  
disclaimer and license as libpng-0.96, with the following individuals added to the list of  
Contributing Authors:  
Tom Lane  
Glenn Randers-Pehrson  
Willem van Schaik  
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997  
Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88,  
with the following individuals added to the list of Contributing Authors:  
John Bowler  
Kevin Bracey  
Sam Bushell  
Magnus Holmgren  
Greg Roelofs  
Tom Tanner  
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995,  
1996 Guy Eric Schalnat, Group 42, Inc.  
xiv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in China BD-A1040/U  
© 2014 Yamaha Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weider Home Gym WESY39060 User Manual
Westinghouse Kitchen Grill mooWICH User Manual
Whirlpool Washer 11044832 User Manual
Whirlpool Washer WTW5500 User Manual
White Westinghouse Washer WM50T 1 User Manual
Yamaha Music Mixer GA24 12 User Manual
Yamaha Stereo Receiver AV Receiver User Manual
Zanussi Refrigerator ZT 45 30 User Manual
Zanussi Washer SL 24 User Manual
Zenith Flat Panel Television C32V37 User Manual