ML501 Reference Design
User Guide
UG227 (v1.0) June 18, 2007
R
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Additional Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Additional Support Resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Online Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Reference Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Base System Builder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EDK Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Stand-Alone Software Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ML501 Reference Design
UG227 (v1.0) June 18, 2007
3
Download from Www.Somanuals.com. All Manuals Search And Download.
R
4
ML501 Reference Design
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Preface
About This Guide
This user guide introduces several designs that demonstrate the Virtex™-5 LX device
features using the using the ML501 Evaluation Platform.
Additional Documentation
The following documents are also available for download at
•
Virtex-5 Family Overview
The features and product selection of the Virtex-5 family are outlined in this overview.
•
Virtex-5 Data Sheet: DC and Switching Characteristics
This data sheet contains the DC and Switching Characteristic specifications for the
Virtex-5 family.
•
•
XtremeDSP™ Design Considerations
This guide describes the XtremeDSP slice and includes reference designs for using the
DSP48E slice.
Virtex-5 Configuration Guide
This all-encompassing configuration guide includes chapters on configuration
interfaces (serial and SelectMAP), bitstream encryption, Boundary-Scan and JTAG
configuration, reconfiguration techniques, and readback through the SelectMAP and
JTAG interfaces.
•
Virtex-5 Packaging Specifications
This specification includes the tables for device/package combinations and maximum
I/Os, pin definitions, pinout tables, pinout diagrams, mechanical drawings, and
thermal specifications.
Additional Support Resources
To search the database of silicon and software questions and answers, or to create a
technical support case in WebCase, see the Xilinx website at:
ML501 Reference Design
5
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Preface: About This Guide
Typographical Conventions
This document uses the following typographical conventions. An example illustrates each
convention.
Convention
Meaning or Use
Example
See the Virtex-5 Configuration
Guide for more information.
References to other documents
Italic font
The address (F) is asserted after
clock event 2.
Emphasis in text
Underlined Text
Online Document
The following conventions are used in this document:
Convention
Meaning or Use
Example
Cross-reference link to a
location in the current
document
See the section “Additional
Documentation” for details.
Blue text
Cross-reference link to a
location in another document
See Figure 2-5 in the Virtex-5
Data Sheet
Red text
Go to http://www.xilinx.com
for the latest documentation.
Blue, underlined text
Hyperlink to a website (URL)
6
ML501 Reference Design
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
ML501 Reference Design
Introduction
optimized balance of high-performance logic, serial connectivity, signal processing, and
embedded processing resources. All members of the Virtex-5 family are built using the
second generation Advanced Silicon Modular Block (ASMBL™) technology and a state-of-
the-art 65 nm copper process to produce the industry's highest performance FPGAs.
Along with capabilities offered directly through an integrated IP block implemented in
available to system level designers. Constructing embedded processing systems is
significantly simplified by the Base System Builder (BSB) wizard provided as part of the
Embedded Development Kit (EDK).
Users can obtain a quick understanding of the features offered by the ML501 boards by
running the demonstration content provided on the CompactFlash (CF) card included
from the ACE files pre-loaded on the CF card and describes what to observe for expected
output.
ML501 Reference Design
7
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Reference Designs
Reference Designs
Base System Builder
The BSB wizard helps designers quickly create a working embedded system using a point-
and-click GUI to select a Xilinx processor and an associated set of desired peripherals. BSB
generated designs for the ML501 are available at:
•
The tutorial describes how to use the EDK BSB wizard, described in the Embedded System
shows a block diagram of the MicroBlaze™ processor based embedded system generated
by BSB. A set of basic software test applications are also generated to verify the
functionality of the peripherals instantiated within the BSB design.
The BSB design can be further customized within the Xilinx Platform Studio (XPS)
environment to add additional standard EDK IP or user-created IP cores.
DDR2
(256 MB)
MicroBlaze
CPU Block
UART
INTC
LMB
GPIO
BRAM
EMC
Ethernet
IIC
SYSACE
OPB
ARB
UG227_01_061407
Figure 1: Base System Builder Block Diagram
8
ML501 Reference Design
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Reference Designs
EDK Design
This ML501 reference design utilizes the Embedded Development Kit (EDK) to create an
embedded processing system using the MicroBlaze processor and the extensive set of
peripherals offered through the EDK IP catalog. The ML501 EDK reference design contains
a complete EDK project that can be used to explore the features of the ML501 platforms.
The Overview and Setup presentation shows how to set up the design and the test
environment. The Stand-Alone Application presentation shows how to exercise the reference
design using the included software applications. EDK designs for the ML501 are available
at:
Figure 2 shows a high-level block diagram of the hardware used in the ML501 reference
design.
OPB2PLB
Bridge
MicroBlaze
CPU Block
DDR2
(256 MB)
UART
DVI
INTC
SYSACE
GPIO
LMB
Ethernet
BRAM
EMC
AC97
PS/2
OPB
ARB
PLB
ARB
UG227_02_061407
Figure 2: ML501 High-Level Block Diagram
ML501 Reference Design
9
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Reference Designs
Stand-Alone Software Applications
compiled within EDK and downloaded to the ML501 with a JTAG download cable for
verification. A set of pre-built ELF and ACE files as well as a readme.txt file explaining
how to run each of the applications for the ML501 are available at:
Table 1: Demonstration Software Applications
Name
Description
Complete collection of stand-alone BIT, ELF,
and ACE files. To run each application
individually, select one of the ACE files and
replace system_my_ace.ace in
configuration address 6 of the production
ML501 CF card.
ml501_mb_standalone_apps_bit_elf_ace.zip
download.bit
MicroBlaze embedded processing system
running bootloop code.
bootload.elf
bootload.ace
bootload_readme.txt
Main menu to load and launch ACE file
demonstrations.
button_led_test.elf
button_led_test.ace
button_led_test_readme.txt
Verifies functionality of GPIO DIP switches,
GPIO LEDs, N-E-S-W buttons and LEDs.
flash_hello.elf
flash_hello_readme.txt
Placeholder application for a user-generated
linear flash design. Loaded from linear flash.
flash_test.elf
flash_test.ace
Tests linear flash memory.
flash_test_readme.txt
hello.elf
hello.ace
hello_readme.txt
Exercises serial port output and input
functionality using libc routines.
hello_uart.elf
hello_uart.ace
hello_uart_readme.txt
Exercises serial port output and input
functionality using low-level UART driver
routines.
iic_eeprom.elf
iic_eeprom.ace
Software bit-banging tests of IIC EEPROM.
iic_eeprom_readme.txt
my_ace.elf
my_ace.ace
my_ace_readme.txt
Placeholder application for a user-generated
ACE file. Loaded from CompactFlash card.
Placeholder application for a user-generated
Platform Flash design. Loaded from Platform
Flash.
my_plat_flash.elf
my_plat_flash_readme.txt
piezo.elf
piezo.ace
ringtones.zip
piezo_readme.txt
Demonstrates audio output to the onboard
piezo speaker using the ringtone RTTTL files.
10
ML501 Reference Design
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Reference Designs
Table 1: Demonstration Software Applications (Continued)
Name
Description
ps2_scancodes_polled.elf
ps2_scancodes_polled.ace
ps2_scancodes_polled_readme.txt
Shows the scancodes from devices attached
to the PS/2 input ports.
simon.elf
simon.ace
simon_readme.txt
Interactive game using N, E, S, W buttons
and LEDs as well as the LCD panel.
slideshow.elf
slideshow.ace
slides.zip
A self-running audio and video presentation
highlighting features of the ML501 and
Virtex-5 technology.
slideshow_readme.txt
spi_hello.elf
spi_hello_readme.txt
Placeholder application for a user-generated
SPI Flash design. Loaded from SPI Flash.
sysace_rebooter.elf
sysace_rebooter.ace
sysace_rebooter_readme.txt
User-selectable loading of ACE files utilizing
the System ACE CF controller.
test_ac97.elf
test_ac97.ace
test_ac97_readme.txt
Records and plays back audio using the
AC97 controller.
testfatfs.elf
testfatfs.ace
testfatfs.zip
Write and read test of the FAT file system on
the CompactFlash card.
testfatfs_readme.txt
usb_hpi_test.elf
usb_hpi_test.ace
demo.bin
USB host interface test utilizing a USB
keyboard.
usb_hpi_test_readme.txt
usb_printer.elf
usb_printer.ace
printer.bin
USB host interface test utilizing a USB
printer.
usb_printer_readme.txt
webserver.elf
webserver.ace
webserver_readme.txt
Web browser based control of GPIO LEDs
and display of GPIO DIP switch status over
Ethernet.
xrom.elf
xrom.ace
Board tests/diagnostics.
xrom_readme.txt
ML501 Reference Design
11
UG227 (v1.0) June 18, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|
