OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
d) Once enabled the Physical Media
Before You Start
b) On the keypad enter 1111 or the
current password. Press the Enter
button when finished. If your printer is
an ST model press the Go to Tools
button, otherwise skip to the next step.
portion of the screen will appear.
Press the corresponding button to
select one of the following, NetBEUI/
Ethernet or NetBEUI/Token Ring.
After making your selection press
Save.
If your printer is equipped with a Token Ring
interface, use the Token Ring Quick Install
Card supplied in this Quick Install Card set to
set the Ring Speed and Source Routing settings
for your environment.
c) The Touch Screen will be used for the
remainder of the data entry.
5.
Assign the Workgroup and Host Names.
Record the following information
3.
4.
Enable Microsoft Network printing.
a) You will be returned to the previous
screen, press the Workgroup and
Host button.
Network Interface Type ___________________
Workgroup Name _______________________
SMB Host Name ________________________
Printer Name ___________________________
OPTIONAL INFORMATION:
a) Press the Connectivity and Network
Setup button.
b) At the next screen, press the Network
Setup button.
b) At the next screen, press the
Workgroup Name button. Using the
touch panel keys, enter the name of
the workgroup in which you want the
printer to appear then press Save.
Enable the Protocol and Media
a) At the next screen, press the
Microsoft Networking button.
c) You will be returned to the previous
screen. Press the SMB Host Name
button, using the touch panel keys,
enter the desired text for this item then
press Save.
b) At the next screen, press the
Transport and Media button.
SMB Host Description ____________________
Printer Description _______________________
c) At the next screen, press the Enable
button to enable the Microsoft Network
protocols.
d) OPTIONAL STEP: Press the SMB
Host Description button, enter the
desired text then press Save. You will
be returned to the previous screen.
Go to the printer and...
1.
2.
Connect your Document Centre to the
network with the appropriate cabling.
e) Press Save again to return to the
Enter the Tools pathway
previous screen.
a) Press the Access ( )button.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
r) Double-click on the Connections
d) Click the Install new printer driver...
Icon.
button.
s) Double-Click on Printers.
e) Select Other OS/2 printer driver.
t) Close the Connections Window.
f) Enter the correct directory in the
appropriate field.
u) Double Click on Printer in the Printers
window. DO NOT CHOOSE THE
NETWORK PRINTER OPTION.
g) Click the Refresh button.
h) Click the Install button after you see
v) Enter a name for the local queue in the
Printer window. (Overwrite the printer
that already appears with something
unique - this does not have to be the
share or hostname of the printer).
the driver description appear.
i) Click the OK button to confirm that the
driver has been installed.
4.
Highlight the OS/2 driver in the Default
printer driver window and click the
Create button.
w) Make sure the cursor is still in the
printer window and press the Enter
key on the keyboard.
5.
6.
Close the Printers window.
You are now ready to print to the local
queue created in step 2v.
x) Select familiar w/ OS/2 if prompted.
y) Highlight the correct lpt port (assigned
in step 2m).
7.
8.
Print a test job.
Check your test job for quality and use the
problem solving section of the Document
Centre 240/255/265 Reference Guide for
resolving print defects.
3.
Install a new printer driver.
a) Insert CentreWare CD 2 into your CD-
ROM drive.
9.
If your print job does not print, refer to the
troubleshooting section in the document
entitled Network Installation and
Troubleshooting Guide to correct the
problem.
b) Make a /desktop/drivers directory from
an OS/2 Window.
c) Copy the driver files from the CD-ROM
disk to the /desktop/drivers directory.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|