Xerox Wide Format Solutions
8855/721P Stacker
Operator Manual
THE DOCUMENT COMPANY
XEROX
701P39432
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
It’s Illegal ..................................................................... 2
FCC Compliance ......................................................... 2
Introduction to your Stacker ...................................... 3
Safety Notes ................................................................ 4
Identifying the Parts on the Stacker .......................... 6
Location of the Stacker Serial Number ...................... 7
Stacker Operation ....................................................... 7
Stacker Jam Clearance ............................................... 7
Stacker Relocation ....................................................... 8
Technical Data ............................................................ 9
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
It’s Illegal
In the USA
FCC Compliance
In the USA
It is against U.S. law to copy copyrighted material without permission
of the copyright owner unless the copying falls within the “Fair Use”
library reproduction rights of the copyright law.
Class A
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communication. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at their own expense.
Further information on these U.S. provisions may be obtained from
the Copyright Office, Library of Congress, Washington, D.C. 20550,
or telephone the Copyright Office at (202) 707-9100 and ask for
circular 21. Copying other items may be prohibited. If you have any
questions seek legal advice.
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user may
find the following booklet prepared by the Federal Communications
Commission helpful:
How to Identify and resolve Radio-TV Interference Problems
Stock Number: 004-000-00345-4.
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR SERVICE:1-800-822-2979
Introduction to Your Stacker
A Customer Service Support Representative will assist you in
keeping your stacker operational and, if required, will arrange for a
Customer Service Engineer to visit your stacker and restore its
performance.
Congratulations on acquiring your new Stacker.
This User Guide provides information that is needed to operate the
Stacker.
The information below is needed when you call your Xerox support
experts.
PURCHASE OF OTHER EQUIPMENT:
Call a local Marketing Representative. They will assist you in
determining and ordering other office equipment that will further
increase your productivity.
1. Customer Account Number: __________________
2. Stacker Serial Number: _____________________
To Locate the Stacker Serial Number, refer to page 7.
3. Printer Serial Number: ______________________
To Locate the Printer Serial Number, refer to Printer User Guide.
Local Marketing Representative phone number:
____________________________
Note: All service calls should be reported under the printer serial
number.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Safety Notes
Your stacker has been designed and tested to meet strict safety requirements. These include safety agency examination and approval, and
compliance to established environmental standards. Please read the following instructions carefully before operating the Stacker.
NOTE: Refer to Instructions as needed to ensure the continued safe operation of your stacker.
FOLLOW all warnings and instructions marked on or supplied with the product.
UNPLUG the stacker from the wall outlet before cleaning. Always
use materials supplied or approved by Xerox. Use of other materials
may result in poor performance and could create a hazardous
situation.
IF AN EXTENSION CORD is used with this stacker, ensure that the
total of the ampere ratings of the products plugged into the extension
cord does not exceed the extension cord ampere rating. Also, make
sure that the total amperage of all products plugged into the wall
outlet does not exceed the outlet protection.
DO NOT use aerosol cleaners
DO NOT install the stacker in direct sunlight, a high humidity or dusty
environment.
NEVER use supplies or cleaning materials for purposes other than
what they were intended. Keep all supplies and materials out of
reach of children.
DO NOT install the stacker where the floor or base is unstable. The
stacker may fall, causing personal injury and/or serious damage to
the stacker.
DO NOT use the stacker near water, wet locations, or outdoors.
WARNING
NEVER spill liquid of any kind on the stacker.
This copier must be grounded.
DO NOT allow anything to rest on the power cord. Do not locate this
stacker where people will step on the cord.
THIS PRODUCT is equipped with a 3-wire grounding-type plug (i.e.,
a plug having a third grounding pin) and an additional safety device.
This plug will only fit into a grounding-type power outlet. This is a
safety feature. To avoid risk of electric shock, contact your
electrician to replace the receptacle if you are unable to insert the
plug into the outlet. Never use a ground adapter plug to connect the
copier to a power source receptacle that lacks a ground connection
terminal.
NEVER remove any covers or guards that require a tool for removal.
There are no operator-serviceable areas within these covers.
THE POWER SUPPLY CORD is the disconnect device for this
stacker. Ensure that installation is near the outlet and is easily
accessible.
NEVER attempt any function that is not specified in this User Guide
THIS STACKER should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of
power available, consult your local power company.
or directed by an authorized Xerox representative.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notes (continued)
UNPLUG this stacker from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
ꢀ When the power cord is damaged or frayed.
ꢀ If liquid has been spilled into the product.
ꢀ If the stacker has been exposed to rain or water.
ꢀ If the stacker is producing unusual noises or odors.
ꢀ If the stacker has fallen or the cabinet has been damaged.
ꢀ The safety feature has been activated for a second time.
ꢀ The stacker still does not work, or continues to
malfunction, after following the procedures in this User
Guide.
If you need additional safety information concerning the copier or
materials supplied by Xerox, you may call the following toll-free
number: 1-800-828-6571.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Identifying the Parts on the Stacker
Upper Panel Assembly
Stacker Unit
Inlet
Power Switch
Power Indicator
Light
Printed Wiring Board
(Transmission)
Media Supports
Release Handle
Thumb Screws
Printed Wiring Board
(Reception)
Release Handle
Frame Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Stacker Serial Number
Stacker Jam Clearance
In order to locate the serial number of your stacker, you must first
push down the release lever and slide the stacker away from the
printer.
The paper fed from the printer will be either cut or uncut.
Caution
To ensure the safety of the user, be aware during jam
clearance that the surface will be hot.
The serial number plate is located on the left of the front cover facing
the printer.
Cut
In order to clear a jam in the stacker, lift the Upper Panel Assembly
and clear any paper (Figure 2). If the jam still exists, push down on
the release lever and move the stacker away from the printer (Figure
1). Clear any visible paper from the paper path.
Serial Number Plate
Uncut
Cut the paper in the printer (refer to the printer user guide) and follow
the above procedure.
Caution Hot Label
Jam Clearance Label
Upper Panel Assembly
Figure 1. Sliding the Stacker away from the Printer.
Stacker Operation
If you are running paper larger than a 24” (610mm) raise the paper
supports.
In order to turn on your stacker, press the power switch to the on
position. When the stacker is on the green Power Indicator Light is
visible.
Figure 2. Lifting the Upper Panel Assembly.
NOTE; The Transmission PWB and the Reception PWB are infrared
connections (See Identifying the Parts on the Stacker). To ensure
proper operation of the stacker, these connections must be debris
free.
NOTE: There is no start up sequence between the stacker and the
printer (either the stacker or the printer may be turned on first). If
your stacker does not run, turn off both the printer and the stacker.
Turn on the stacker then turn on the printer. If the stacker still does
not function, verify power source and then call for service.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Top View
Stacker Relocation
The stacker cannot be moved except by a DRC rigger.
Stacker
power cord
12'
66"
(168cm)
To ensure that the stacker operates reliably after moving it to a new
location, consider the following guidelines:
Printer
power cord
12'
(3.66m)
Stacker
S
The new location must provide minimum clearances around the
stacker. These clearances are shown in the diagram on the
right.
153.5”
(390cm)
S
S
The flooring in the new location must be adequate to support the
weight of the stacker and be reasonably level.
39.5"
(100cm)
721P
The new location must be well ventilated and maintain an even
temperature. Extreme temperature or humidity changes can
affect the stacker.
48"
(122cm)
S
Power source receptacles must be properly grounded.
35"
57"
65"
(165cm)
In addition to the above requirements, the surface must be at least
157” (400cm) x153.5” (390cm) and be capable of supporting at least
108lb (49kg) stacker and the 880lb (400kg) printer attached.
(90cm)
(145cm)
157”
(400cm)
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Data
Dimensions: Width: 34” (864mm)
57.5” (1461mm) w/paper supports extended.
Depth: 41” (1041mm)
Height: 28.5” (724mm)
Weight: 108 lbs. (49kg)
Paper Size: 36 x 48” (914mm x 1219mm) Max.
Stacker Capacity: 200 sheets of plain paper with minimal scatter
500 plain paper sheets Max.
Electrical Data:
Current service: 3 Amps or more
Power Supply: 110V - 240V
Frequency: 50/60Hz
Power Consumption: 60W
Temperature: 50LF - 90LF (10LC - 32LC)
Humidity: 20 - 85%
Noise Level: 57dB Max. (during operation)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|