700IDT In-dash Touchscreen VGA LCD Monitor
Owner’s Records
The model and serial numbers are located on the rear of the unit. Please record these
numbers in the spaces provided below, as well as the dealer name, address, and
telephone number. Please refer to these records whenever speaking to your dealer
regarding this product.
Model # _______________________ Serial # ______________________
Dealer Name _________________________________________________
Street Address ________________________________________________
City ___________________ State _______________ Zip ____________
Phone # (
) _________________Purchase Date ____/____/____
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click Finish to finish the installation. You will be asked to restart your
Package contents
computer.
9. Remove the CD and Restart your computer. After Windows XP is finished
loading, connect the 700TS or 700TSV USB cable to one of your computer’s
USB Ports.
10. Windows XP will start “Found New Hardware Wizard” automatically upon
detection of the USB Touch Controller. Click on Next to continue.
11. Click on Next to continue.
1. 7” In-Dash Touch Screen monitor
2. Monitor cable - monitor to VGA (15 pin) and 2 x Composite
Video
3. Power cable
4. Cigarette lighter car adaptor
5. Remote control
* User Manual and Touch Screen Driver CD are included
12. Click Finish to finish Setup. Your Touchscreen is ready to use now. You can
click on the icon Touchkit located on your desktop to launch the Touchscreen
program for various settings and adjustments.
14
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select the Rotating Monitor Utility and/or the Shutdown Utility if you want to
install them and click on Next to continue. The Rotating Monitor Utility
allows you to rotate your display while the Shutdown Utility provides you
with one-click shutdown.
7” In-Dash Touch Screen Monitor package contents
5. Click Next to accept the Destination Directory default, shown below. Click on
Browse to change Destination Directory.
1. 7” In-Dash Touch Screen Monitor Main Unit
2. Trim Plate
3. Sleeve
6. Click Next to accept the Program Folder default, shown below. Files will then
start to be copied to your computer.
700IDT Overview
1. Front View
7. When the warning that says this software has not passed Windows Logo test,
please click on Continue Anyway to continue the installation. File will
continue to be copied to your computer.
4
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect signal source
2. Rear View
1. Connect the 20-PIN connector on the black monitor cable to the back of the
700IDT. Route the cable through the dash to your PC.
2. Connect the D-Sub15 15-PIN VGA connector to your computer’s monitor output.
3. Connect the Yellow RCA plug labeled 1 and 2 to your composite video sources if
required (e.g. Video Game console, Camera, DVD-Player, etc.) The white RCA
plug labeled 3 is non-functional.
Signal Cable socket
4. Connect the USB connector to your computer’s USB port after you have installed
the Touch Screen driver.
3. Side View
Sleeve
Install the Touch Screen Driver for Microsoft Windows XP:
Here is a simple walk through of Windows XP Touch Driver Installation for 800TSV.
You can skip this step if you have the 800YV.
1. Click on Start, Run, and Enter D:\Win2000_XP \Setup.exe (Please change the
drive letter corresponding to the drive containing the installation CD). Click
OK.
Screw holes for
Mounting Sleeve
2. The Install Wizard window appears. Click Next.
3. Click Next to continue. Please leave the check box next to “PS2 Touchscreen
Driver” unchecked.
12
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Swivel Left/Right 150
Method one: Power the unit through Cigarette lighter:
- Connect the power cable with one yellow wire, one red wire, and one black
wire to the back of the 700IDT. Connect the Red and Yellow wires together
and plug the cigarette lighter adaptor into your car’s cigarette lighter socket.
Solder the
core wires to
connect them
Connecting the leads
– Twist the Core
wires when
connecting
Caution:
To prevent short – circuit, cover
the terminals of the UNUSED
leads with insulating tape
Swivel Left 150
Swivel right 150
Method two: Power the unit through your car’s electrical system:
- Connect the power cable with one yellow wire, one red wire, and one black
wire to the back of the 700IDT.
-
-
Hold the top of the
monitor with both
hands
Push and pull as
illustrated
-
-
Hold the top of the
monitor with both
hands
Push and pull as
illustrated
Connect the Power Cable:
* Screw and
connector Not
Included
Connect Black wire (Ground) to metallic
body or chassis
Ignition
Switch
Connect Yellow wire (+) to a live terminal
in the fuse block (Constant 12V DC)
Connect Red wire (VCC) to an
accessory terminal in the fuse block
(Switched 12V DC)
Fuse Block
Fig.1
6
11
Download from Www.Somanuals.com. All Manuals Search And Download.
External Buttons, Hot keys description:
In-dash Monitor installation:
Note1: The OSD Menu is only available when a video source is present.
Note2: The Hot keys are only available while the OSD menu is off.
1
“M”– Stands for Menu. This button is for OSD menu on/off toggling.
“S” – Stands for Select. Use this button for selection while OSD menu is on. Use
this button as a hot key to switch video channel directly when OSD menu is
off, following this rotation: VGA ->Video1 -> Video2 ->VGA.
“/\” – Stands for Increase. Use this button to increase value while OSD menu is
on.
“\/” – Stands for Decrease. Use this button to decrease value while OSD menu is
on.
Dashboard
Primary On Screen Display functions description:
The Primary OSD can be turn on by pressing the button “M”.
2
Bright
- Adjust brightness by pressing the Increase/Decrease buttons. Increase the
number for higher brightness. Decrease the number for lower brightness.
4
Contrast
- Adjust contrast by pressing the Increase/Decrease buttons. Increase the
number for higher contrast. Decrease the number for lower contrast.
7
Horz Pos
3
6
- Adjust Horizontal position by pressing the Increase/Decrease buttons.
Vert Pos
- Adjust Vertical position by pressing the Increase/Decrease buttons.
5
Phase
- Adjust CLK phase alignment by pressing the Increase/Decrease buttons.
(Image flicker can by avoided by CLK phase adjustment. This function is valid
on the VGA mode only)
1. Remove the trim plate and sleeve
2. Install the sleeve into the dashboard
3. After the sleeve is correctly installed into the dashboard, bend the
appropriate tabs to hold the sleeve firmly in place
4. Slide the main unit into the sleeve
Auto Detect
- Adjust display automatically. (Valid on the VGA mode only)
5. Apply screws (not included) to secure the unit
6. Re-attach the Trim Plate
7. To slide out the In-Dash Monitor, press the front panel firmly towards
dashboard (as the direction illustrated) and release.
Secondary On Screen Display functions description:
The Secondary OSD can be turn on by pressing “M” twice.
Backlight
- Adjust the CCFL backlight output level.
10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Default
- Load default setting.
Electrical Characteristics:
Absolute Maximum Ratings:
Parameter
Symbol
Min
Max
1.4
Unit
Vp-p
V
AV2 First
- Set whether to have monitor switch to Video Input 2 automatically if a signal
is present. Good for car reverse monitoring system.
Analog Signal Input Level
Power Supply
Signal
0
DC IN
11
-
24
Scaler
Digital Signal Input Level
Operation Temperature
-
-
5+0.3
176
V
- Set the display mode to 16:9 or 4:3. Set it to 4:3 if your video signal is in 4:3
aspect ratio and you don’t want the display to be stretched out. Default is
16:9.
-14
ºF
External Specifications:
Recommended Operating Conditions:
Video Source Input
•
•
RGB analog male connector (15-Pin D-SUB) x 1
RCA composite video female connector x 2
Audio Source Input
Parameter
Symbol
Min
Typical
Max
Unit
Analog Signal Input Level
RGB/Composite AV
Signal
DC
0.5
GND
11
0.7
-
1.2
0.3
Vp-p
V
•
RCA audio female connector x 1 is of no function
Touch Panel I/O
DC IN
Current
12
24
V
•
USB connector x 1
Power Supply
0.59
0.72
0.74
A
Power Source Input
•
Single 12V DC_IN (Supports 11V ~ 24V)
External Buttons Input
Power Consumption:
•
•
OSD buttons for Menu/Select/Increase/Decrease
PWR button for power switch
Standby mode < 0.3W
Suspend mode < 3W
Continue mode < 4W (w/o inverter), <9W (w/ inverter)
Internal Specifications:
LCD Module
: 7” Digital TFT LCD
: 800 x 480 (2400 x 480 dots)
: 0.1905 x 0.1905 mm
: 400 NIT
Inverter output specifications:
LCD Native resolution
Pixel Pitch
LCD Panel Brightness
Contrast
Power supply: +12V
Lamp frequency: 50KHz
Max output open voltage: 1300Vrms
Power consumption: < 5W
: 150 : 1
Response Time
Viewing Angle
: 56ms
: Vertical: 90 / Horizontal: 120
Supported display resolution : 640 x 480 ~ 1600 x 1200
Supported refresh rate
Video Format
Colors
: 60 ~ 75 Hertz
: NTSC/PAL Auto-detect
: 18-bit (262,144 Colors)
: Adjustable output w/ Power Mgmt
Inverter Inside
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|