HDMI1X2
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The Xantech 1X2 Splitter for HDMI 1.3
The Xantech 1X2 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu-
ray players and other HDTV devices with HDMI outputs to be connected to up
to two HDTV displays (or more if multiple splitters are utilized in place of HDTV
displays).
How It Works
The Xantech 1X2 Splitter for HDMI 1.3 is a distribution hub that sends the
same HDMI signals to two HDMI-compatible digital display devices. An HDMI
video source is connected to the input jack on the 1X2 Splitter for HDMI 1.3.
HDMI-compatible displays are connected to each of the HDMI outputs on the
1X2 Splitter, and beautiful, sharp HDMI video will then emerge on all of your
connected displays.
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE XANTECH 1X2 SPLITTER FOR HDMI 1.3
•
By default, display information from the display connected to HDMI output port 1 is
sent back to the source. Therefore, the other display connected to the 1X2 Splitter
for HDMI 1.3 must be capable of accepting the timings and resolutions of the
display that is connected to HDMI output port 1. It is recommended that the display
with the lowest native resolution be connected to HDMI output port 1. This is to
ensure that a compatible video signal will be able to be displayed on all connected
monitors. There is a generic EDID programmed into the 1X2 Splitter for HDMI 1.3
that can be used instead. Please see page 5 for more details.
•
The Xantech 1x2 Splitter for HDMI 1.3 is HDMI/HDCP compliant and is
compatible with all HDMI and DVI* displays.
*When used with a DVI-to-HDMI cable or adapter
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Features
•
•
•
•
Connects up to two HDMI / DVI displays from one HDMI source
Optionally add more displays by connecting splitters
Easily attains resolutions up to 1080p, 2k, and 1920 x 1200
HDMI and HDCP compliant
HDMI 1.3 Features
•
•
•
•
•
•
Lip-Sync Pass Through
225 MHz (up to 12 bit YUV 444 supported @ 1080p)
Deep Color Supported (XV Color Supported)
Color Space Conversion Supported
Dolby TrueHD & DTS-HD Master Audio Supported
CEC Pass Through
INCLUDED IN THE PACKAGE
(1) 1X2 Splitter for HDMI 1.3
(1) 6 ft HDMI-to-HDMI Cable (M-M)
(1) 5V DC Power Supply
(1) User’s Manual
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT AND DESCRIPTIONS
Front Panel
1
2
3
4
Back Panel
5
6
7
8
9
10
1
2
Power LED
This LED will activate once a valid power source is applied.
Internal EDID LED
This LED will activate only when the pre-programmed internal EDID is being
used. Please see page 5 for more details on the internal EDID.
3
External EDID LED (default EDID routing)
This LED will activate only when the external EDID is being used. Please see
page 5 for more details on the external EDID.
4
5
Link LED
This LED activates when a valid link between the source and splitter is detected.
EDID Button
This button will activate the onboard EDID. Press this button (the Int. EDID
should turn on and the Ext. LED should turn off) and reset the unit using the
Reset button (below) to initialize this EDID mode. To use an external EDID, press
the EDID button again (the Int. LED should turn off and the Ext. LED should turn
on) and press the Reset button to initialize this EDID mode.
6
Reset Button
This button will reset the unit and initialize whichever EDID mode is currently
selected.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL DESCRIPTIONS, CONTINUED
7
8
HDMI Input
This is the input for the HDMI source device. When a valid source is detected by
the splitter, the Link LED will activate.
HDMI Out 1
This is the first HDMI output port. Connect a valid HDMI display to this port.
When the External EDID mode is active, the EDID form the display connected to
this port will be used to send to the source.
9
HDMI Out 2
This is the second HDMI output port. Connect a valid HDMI display to this port.
10 5V DC Power Input
This port is for the included 5V DC power supply. When a valid 5V power supply
is attached, the Power LED will activate.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE 1X2 SPLITTER FOR HDMI 1.3
How to Connect the 1X2 Splitter For HDMI 1.3
1. Connect the supplied cable from the HDMI source into the 1X2 Splitter for HDMI 1.3
input.
2. Connect the cables from your displays (monitor or projector) into the HDMI outs
of the 1X2 Splitter for HDMI 1.3. Up to 2 displays are supported.
3. Plug the 5V DC power supply into the 1X2 Splitter for HDMI 1.3.
NOTE: By Default, the display information from the display connected to HDMI output
port 1 is sent back to the source. Therefore, the other display that is connected to the
1X2 Splitter for HDMI 1.3 must be capable of accepting the timings and resolutions of the
display that is connected to HDMI output port 1. It is recommended that the display with
the lowest native resolution be connected to HDMI output port 1. This is to ensure that a
compatible video signal will be able to be displayed on all connected monitors. There is
a generic EDID programmed into the 1X2 Splitter for HDMI 1.3 that can be used instead.
Please see below for the activation process.
EDID MODE
The HDMI1X2 has an EDID button which will determine if the EDID is used from the
display attached to output 1 (Ext. mode) or if the onboard EDID (Int. mode) will be
used.
The current EDID mode can be determined by which EDID mode LED is active on
the front panel. The Ext LED will indicate that the external EDID (from output port 1)
is being used, and the Int LED will indicate that the internal pre-programmed EDID is
being used.
If you want to use the onboard EDID, press the EDID button on the rear panel and
then press the reset button to activate the new EDID mode. To revert back to using
the external EDID, press the EDID button again and then reset the unit using the reset
button to activate the new EDID mode.
Listed Resolutions in the Internal EDID:
1280x720p
1280x720p
1920 x 1080i
1920 x 1080i
720 x 480p
720 x 576p
1920 x 1080p
1920 x 1080p
1440 x 480p
1440 x 576p
50 Hz
(Native)
59.94 / 60 Hz (Native)
50 Hz
59.94 / 60 Hz
59.94 / 60 Hz
50 Hz
50 Hz
59.94 / 60 Hz
59.94 / 60 Hz
50 Hz
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Video Amplifier Bandwidth: 225 MHz
Input Video Signal: 12 Volts p-p
Input DDC Signal: 5 Volts p-p (TTL)
Single Link Range: 1080p/1920 x 1200, 12 bit color depth
HDMI Connector: Type A 19 Pin Female
Power Supply: 5V DC
Power Consumption: 10 Watts (max)
Dimensions: 10.25”W x 1”H x 4.25”D
Shipping Weight: 5 lbs
Technical Support
Mailing Address
Hours: 7AM-5:30PM PST
Xantech Corporation
Phone: 800.843.5465
press 2 for Tech Support
FAX: 800.492.6832
13100 Telfair Avenue, 2/F
Sylmar, CA 91342
e-mail: [email protected]
HDMI1X2 User Manual © 2008 Xantech Corporation
This document is copyright protected. No part of this manual may be copied or
reproduced in any form without prior written consent from Xantech Corporation.
Xantech Corporation shall not be liable for operational, technical, or editorial
errors/omissions made in this document. Xantech is a registered trademark of
Xantech Corporation. All rights reserved.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|