Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations
Thank you for purchasing the Audiovox Xpress XM® Satellite Home Kit.
You are one step closer to experiencing the latest innovation in XM®
Satellite Radio. XM® Satellite Radio will revolutionize your vehicle or in-
home entertainment.
XM® features over 170 digital channels — the most commercial-free
music, over 30 channels of news, sports, talk and entertainment, over 20
dedicated channels of XM® Instant Traffic & Weather, and the deepest
play-list in the industry with access to over 2 million titles!
XM® Satellite Radio service gives you the power to choose what you
want to hear - wherever and whenever you want it. XM® is America’s #1
Satellite Radio provider with over 4 million customers.
Your Audiovox Xpress XM® receiver must be used with an accessory kit,
such as the Audiovox Home Kit, Boom Box or Vehicle Kit as required by
your specific installation needs. These kits are available at retailers where
Audiovox main units are sold.
Required subscription for service sold separately.
Installation costs and other fees and taxes may apply, including a
one-time activation fee. All fees and programming subject to change.
College sports games subject to availability. Subscriptions subject to
Customer Agreement included with the XM Welcome Kit and available at
www.xmradio.com. Only available in the 48 contiguous United States.
©2005 XM® Satellite Radio Inc. XM® is a trademark of XM® Satellite
Radio. All rights reserved. All other trademarks are the property of their
respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
FCC Information
· NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by XM®
Satellite Radio, Inc. can void the user’s authority to operate this device.
Please note that the cables and antenna wire that has been supplied with your
XMC10 car cradle are supplied with permanently attached ferrite beads. It is the
responsibility of the user to use the cable and antenna wire with the ferrite beads.
By adhering to these warnings and safety considerations, stated in the manual and
by XM®, accidents.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Cautions and Warnings
1. Do not install the Home Cradle in a position that obstructs viewing
of any home entertainment component, such as a Television, or
stereo system indicators and displays.
2. This unit complies with the interference limits relative to a Class B
digital device, applicable under Part 15 of the FCC Rules regarding
installation in a residential environment. If the unit is not installed in
accordance with these instructions, it could cause harmful interfer
ence to radio or television reception. If this condition persists after
corrective action, consult your dealer or experi-
enced installation facility.
3. By adhering to these warnings and safety considerations, serious
accidents and/or personal injury can be avoided.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Contents XMH10
Install Manual
(P/N 128-7476A)
AudioCable
(P/N112-3599)
1 pc.
Antenna
(P/N118-1134)
1 pc.
Cradle XMH10
(P/N136-4060)
DCPowerAdapter
(P/N112-3592)
1 pc.
1 pc.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Installation/Wiring Precautions
1. Make sure the adapter cable is not connected to an AC wall outlet
until all interconnections have been made and verified. The adapter
power cable should be connected last.
2. Do not install the unit in the locations exposed to direct sunlight or
in areas subject to extreme temperatures.
3. Incorrect installation may cause damage to the system.
4. During antenna placement/installation, refer to the Antenna Aiming
procedure outlined in the Xpress XM® User Guide (128-7454B).
Setting Up and Installing Your Kit
NOTE: The XM® signal can be received and processed virtually
anywhere as long as there are no obvious satellite signal
obstructions such as high terrain, trees, overhangs, etc.
1. Cabling Interconnections
You can begin to enjoy XM® Satellite Radio as soon as the
Xpress XM® Receiver and home Kit installation are complete.
Set up your Xpress home kit using the following installation
instructions, or enlist the help of a professional installer.
2. Installing/Positioning the Antenna
For best reception, the supplied antenna should be placed near a
window; some repositioning may be required to achieve optimum
results. The following guidelines are recommended:
Download from Www.Somanuals.com. All Manuals Search And Download.
7
a. In a major city, where XM® ground repeaters are present, you
can usually place the antenna away from a window and still
achieve the desired results.
b. You can also place the antenna outside (on the roof structure),
provided it is clear of any overhead obstructions.
Interconnect Diagram
CRADLE
XMH10
AUDIO CABLE
HOME
ANTENNA
DC
POWER
AUDIO INPUT TO
ADAPTER
EXTERNALAMPLIFIER.
TO AC WALL
OUTLET
Download from Www.Somanuals.com. All Manuals Search And Download.
8
continuously. If you experience a loss of signal or audio, reposition
the antenna inside the home or outside as necessary.
3. Installing the Xpress In the Cradle
Install the Xpress XM® Receiver in the docking station as follows:
a. After making sure the connectors and guide pin hole are properly
lined up, gently lower the Xpress XM® Receiver into the cradle
and gently press down on the Xpress XM® Receiver to mate
the connectors together.
DOCKING
STATION
TOP VIEW
CONNECTOR
GUIDEPIN
16-PIN SYSTEM
CONNECTOR
DOCKING
STATION
FRONT VIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
9
b. The Xpress XM® Receiver should now be nestled securely in
the docking station.
ANT IN RF
CONNECTOR
DOCKING STATION
REAR VIEW
DCINCONNECTOR
AUDIO OUT
CONNECTOR
4.Aiming your XM® Home Antenna
If the Xpress display says “NO SIGNAL,” the antenna needs to be
repositioned. In addition, even if you are receiving the XM® signal, it
is recommended that you optimize the position of your XM® Antenna
as described in this section enabling you to receive the strongest
possible signal and consistent, mute-free reception. Your Xpress XM®
display
Download from Www.Somanuals.com. All Manuals Search And Download.
10
has two different signal-strength indicators which will help you
optimize the antenna’s position: The first is a basic signal strength
indicator visible at the upper right corner of the display screen during
normal listening. It has from zero to four vertical bars; four bars
represent the strongest signal. The other is a higher-resolution
signal-strength indicator screen which allows you to optimally aim
your XM® Antenna. This screen shows Terrestrial and Satellite
indications in a horizontal bar graph presentation, with a minus (-)
sign on the left and a plus (+) sign on the right.
To access and use this screen, refer to the Xpress XM Satellite
Radio Receiver User Guide (128-7454B). Adjust the antenna location
until the maximum number of “Satellite” bars is displayed. The Xpress
XM® will receive programming as long as either the satellite or
terrestrial signal has at least two bars displayed.
Selecting a position with the maximum number of “Satellite” bars
displayed will ensure a consistently strong signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
a. Positioning the XM Antenna
The antenna supplied with the Xpress XM® Home Kit is a
high gain type that can receive XM ’s signal from one of XM®’s
satellites and/or, depending on where you live, XM®’s terrestrial
repeaters. It is recommended that the antenna be positioned near
a south-facing window or outdoors with a clear view of the south
eastern sky in order to receive the satellite signal. In some cases,
it will be possible to receive XM®’s signal through standard home
walls or a roof. To position your antenna, first set up the home
system as described earlier in this installation guide. Next,
position the antenna until you receive the strongest possible
satellite signal. If the satellite signal is not available, you can
optimize it for a terrestrial signal (where available).
b.Indoor installation on a flat surface
To aim your antenna at the satellite:
1. Set antenna flat against its base on a flat (horizontal)
surface.
2. Turn the base of the antenna so that the XM® logo is
facing to the south if you are in the eastern half of the U.S.
and to the south/southeast if you are in the western half.
3. Use the “Antenna Aiming” screen, as described on the
previous page, to optimize antenna tilt angle and position.
4. If necessary, experiment with different locations near a
south-facing window or outside.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
c.Outdoor installation or indoor wall mounting
The antenna can also be attached vertically to an external or
internal wall if that is moreconvenient than placing it on a
horizontal surface.
1. Holding your antenna up, find a wall location that ensures a
strong signal. It is recommended that you use an extension
cord to temporarily locate your Xpress XM® antenna
outdoors while optimizing the antenna location with the
Antenna Aiming screen.
2. Attach four screws to the wall using the template provided.
Use screws with head sizes small enough to fit in the center
of each of the four holes but large enough not to pop out of
the elongated sections. Leave 1/8 inch of the screw shanks
behind the heads sticking out of the wall.
3. Tilt the antenna fully back on the base, place the antenna
base on the four screw heads with the antenna pivot at the
top, and pull down approximately 1/4 inch until the base is
firmly secured. Note that the XM® logo will be upside down
when the antenna is properly installed.
4. Tilt the antenna away from the wall/base until the signal
strength is optimized.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
NOTE: Do not cut the antenna cable and attempt to splice it
or attach alternative connectors or cable. The cable
and connectors used in your XMH10 Home Kit are
specially chosen and attached at the factory to
ensure that they will work with XM®‘s unique
frequency band. If an antenna extension is required,
use the Terk by Audiovox XM-EXT50. This is an XM®
approved 50 foot amplified extension cable available
at your local consumer electronics retailer. Failure to
do so could damage the unit.
5. Apply power to the Xpress XM® Receiver as outlined in the
associated User Guide and obtain an audio output. If no audio
is heard, move the antenna to different positions on the
surface until an audio output is heard. This is the desired
antenna position and should be marked with masking tape or
by another nons-cratch method.
6. After determining the optimum position, turnoff Xpress power,
disconnect the power adapter from the wall outlet receptacle
and disconnect the antenna cable.
7. Plan the routing of the antenna cable to the cradle. Make sure
you avoid any obstructions that could crimp, kink or twist the
cable; use protective grommets wherever rough openings are
encountered.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
8. If the antenna is mounted outside, route the cable from the
antenna position to the interior of the home, working the cable
through the basement, under a window sill, etc.; make
adjustments and take up slack whenever necessary.
9. Plug the antenna cable into the ANT IN connector on the back
of the cradle.
10. Plug the DC Adapter jack into the DC IN receptacle on the
cradle.
11. Plug the other end of the AC/DC wall adapter into 110-volt wall
receptacle; then press the Xpress XM® Receiver Power button
(
) to energize the unit. You are now ready to enjoy XM®
programming within your home.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
12 MONTH LIMITED WARRANTY
AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants
to the original retail purchaser of this product that should this product or
any part thereof, under normal use and conditions, be proven defective in
material or workmanship within 12 months from the date of original
purchase, such defect(s) will be repaired or replaced with new or
reconditioned product (at the Company's option) without charge for parts
and repair labor.
To obtain repair or replacement within the terms of this Warranty, the
product is to be delivered with proof of warranty coverage (e.g. dated bill
of sale), specification of defect(s), transportation prepaid, to an approved
warranty station or the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated
static or noise, to costs incurred for installation, removal or reinstallation
of the product, damage to speakers, accessories, or vehicle and home
electrical systems, malfunction of satellite transmissions, repeater signal
or receiver unit.
This Warranty does not apply to any product or part thereof which, in the
opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident,
or by removal or defacement of the factory serial number/bar code label(s).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WAR-
RANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF
THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD
OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO
CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUEN-
TIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No
person or representative is authorized to assume for the Company any
liability other than expressed herein in connection with the sale of this
product.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This
Warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.,
HAUPPAUGE, NEW YORK 11788 (1-800-645-4994)
128-7351
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Download from Www.Somanuals.com. All Manuals Search And Download. 128-7476C
© 2006 Audiovox Electronics Corporation
|