iii
Regulatory Compliance for Thin Clients
EMC and Safety Requirements
Model VX0 thin clients are compliant with the regulatory requirements in the regions listed below.
U.S.A. - FCC Part 15 (class B), UL60950
Canada - ICES-003, CAN/CSA-C22 No. 60950
Europe - EN 55022 (class B), EN 61000-3-2 (class A), EN 61000-3-3, EN 55024, EN 90650-1:2000+ALL
Australia / New Zealand - AS/NZS CISPR 22
Japan - VCCI CISPR 22 (class B)
China - CCC GB9254-1998, GB17625.1-2003, GB 4943-2001
Korea - MIC
RF & EMC Requirements
Model VX0 thin clients with internal wireless option are compliant with the regulatory standards in the regions listed
below.
U.S.A. - FCC Part 15 C, 15.401-15.407, FCC 1.1310 (RF exposure)
Canada - RSS-210
Europe - EN 55022 (class B), EN300.328, EN301.489-1, EN301.489-17
Australia / New Zealand - AS/NZS 4771
Japan - Telec (Equipment Radio Regulation, 2006)
China - SRRC (CMII)
Korea - MIC (RRL)
Canadian DOC Notices
Class A - This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
Class B - This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
Wireless Usage and Requirements
Radio transmitting type devices (RF module) are present in the Model VX0 as an option. These devices operate in
the 2.4 GHz band (i.e. 802.11b/g WLAN & Bluetooth).
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a
wireless device near the body (this does not include extremities) is typical. This device should be used more than
20 cm (8 inches) from the body when wireless devices are on and transmitting.Some circumstances require
restrictions on wireless devices. Examples of common restrictions include:
•
When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable
authority for authorization prior to use or turning on the wireless device.
•
Every country has different restrictions on the use of wireless devices. Since your system is equipped with a
wireless device, when traveling between countries with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination
country.
•
Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device
will void the authorization to use it. Please contact the manufacturer for service.
Cable Notice
The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or
host devices. Failure to do so may cause interference and violate FCC and international regulations for
electromagnetic interference.
Download from Www.Somanuals.com. All Manuals Search And Download.
