CIPHER Lab CPT-8061
Wireless Scanner
Use and Installation
Version 10.00 (or Above)
Release Date: December 12, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction................................................................................................1
1.1 Overview........................................................................................................1
1.2 Technical Support............................................................................................2
1.3 Publications ....................................................................................................2
1.4 Using this Manual ............................................................................................2
1.4.1 Assumptions ..........................................................................................................2
1.5 Guide Conventions.....................................................................................................3
CPT-8061 Wireless Scanner Overview.........................................................5
2.1 Access Point and Wireless Scanner Components...................................................5
2.1.1 3560 Bluetooth Access Point Receiver .......................................................................6
2.1.2 CPT-8061 Charging and Communication Cradle ...........................................................6
2.1.3 CPT-8061 Bluetooth Wireless Terminal (Scanner) .........................................................7
2.2 Wireless Scanner – Furniture Wizard Interface.....................................................8
Using Wireless Scanners with Furniture Wizard..........................................9
3.1 Overview........................................................................................................9
3.2 Loading and Configuring CIPHER Scanner Agent Software ................................... 10
3.3 Configuring Furniture Wizard for Scanner Use.................................................... 15
3.4 Using Wireless Scanners with Furniture Wizard .................................................. 20
3.5 Taking Physical Inventory - Inventory Function (Selection 1) ............................... 24
3.6 Creating an Invoice – Sales Function (Selection 2) ............................................. 27
Listing All Scanned Items................................................................................................28
Transmitting Captured Data to Furniture Wizard..................................................................29
Changing the Item Quantity............................................................................................30
3.7 Retagging Items for Sales or Markdown - Tag Floor Function (Selection 3) ............. 31
3.11 Transferring Items Between Branches - Transfer Function (Selection 4) ............... 33
3.6 Receiving Purchase Orders – Receive PO Function (Selection 5)............................ 34
Label Setup..................................................................................................................34
Receiving Items Using the Wireless Scanner......................................................................39
Processing a Scanned Item that is not in Furniture Wizard ..................................................39
Listing All Scanned Items ...............................................................................................41
Reconciling Received Items ............................................................................................42
Received Items with No Associated Purchase Order............................................................43
Processing Received Items .............................................................................................43
Download from Www.Somanuals.com. All Manuals Search And Download.
“Keyboard-less” Receiving Functions................................................................................ 46
3.8 Performing Stock Checks – Stock Check Function (Selection 7).............................53
Appendix A: Installation and Configuration .............................................. 55
4.1 Overview......................................................................................................55
4.2 Installing the Required Hardware .....................................................................56
4.2.1 Preparing CPT-8061 Scanner Units ........................................................................... 56
4.2.2 Installing and Configuring Access Point .................................................................... 58
4.2.2 Access Point Receiver Functions .............................................................................. 58
4.2.4 Installation and Configuration Procedures ................................................................. 59
4.3 Uploading Firmware Updates to Scanners..........................................................66
4.4 Pairing Wireless Scanners with Access Point.......................................................71
4.5 Configuring Wireless Scanners.........................................................................73
4.5.1 Subnet Mask Setting ............................................................................................. 76
4.5.2 Local IP Address Setting......................................................................................... 77
4.5.3 Gateway IP Address Setting.................................................................................... 78
4.5.4 DNS Server Setting............................................................................................... 78
4.5.5 Server IP Setting .................................................................................................. 79
4.5.6 Server Port Address Setting.................................................................................... 80
Appendix B: Settings Worksheet / Miscellaneous..................................... 81
5.1 Overview......................................................................................................81
5.2 Settings Worksheet........................................................................................82
Section 1 - Current Local Area Network Settings ................................................................ 82
Section 2 - Access Point Settings..................................................................................... 82
Section 2a - Additional Access Point Settings..................................................................... 83
Section 3 - CIPHER Scanner and Agent Port Settings.......................................................... 84
5.3 CIPHER Lab Kernel Update Procedures ..............................................................85
5.4 Furniture Wizard Firmware Update Procedures ...................................................90
5.5 Optimizing the Furniture Wizard Database .........................................................94
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
1.1 Overview
Furniture Wizard offers a complete network-based, bar-code scanning solution utilizing the
CIPHER Lab CPT-8061 Wireless Terminal (referred to as a “wireless scanner” throughout
this manual). Using this hand-held scanner and Furniture Wizard’s customized price tags, you
can capture and manage your inventory and sales data with unparalleled ease. The state-of-
the-art Bluetooth wireless communications technology built into this sophisticated scanner
allows you to easily transmit the captured information to Furniture Wizard. For instance, you
can receive purchased inventory into stock without touching your computer, or you can check
the in-stock status for a floor item right when a customer asks without having to leave the
customer’s side. You can store a running total of items for a customer and automatically
transfer the list to a sales invoice, all while helping your customer to shop.
With our bar-coding solution, taking inventory couldn’t get easier — simply point the scanner
at the labeled item and then scan it. Furniture Wizard automatically updates your inventory
with the captured data in the scanner. Similarly, you can retag items for sales or markdown in
a flash. The scanner stores a list of items you picked, and Furniture Wizard uses that data to
quickly generate new tags and update your records.
This guide will help you perform the installation and configuration tasks required to use the
CIPHER Lab CPT-8061 wireless scanner with your Furniture Wizard software. It also includes
detailed instructions on how to perform each inventory and sales function with your scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Technical Support
Furniture Wizard provides world-class support. Please contact us at:
New Vision Information Systems
820 Starboard Street
Chula Vista, California 91914
Phone: (619) 869-7200
Fax: (619) 869-7210
1.3 Publications
Your Furniture Wizard CD-ROM contains Acrobat PDF versions of all of Furniture Wizard’s
documentation. The files are located in the Documentation subdirectory. Please contact
your Furniture Wizard representative to order hard copies of publications.
For more complete documentation on Furniture Wizard’s many powerful features, please
see this manual’s big brother, the Furniture Wizard User Guide
(Furniture_Wizard_User_Guide.pdf).
1.4 Using this Manual
1.4.1 Assumptions
To successfully install and configure the components required for proper operation of the
wireless scanner solution, you must have access to, or know the following settings for
the local area network used in conjunction with Furniture Wizard in your operations:
ƒ DNS Server
ƒ IP Address
ƒ Default Gateway
ƒ Subnet Mask
To use the Bluetooth scanner functions, you should also possess a basic understanding
of the inventory and sales functions in the Furniture Wizard software.
2
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5 Guide Conventions
The following information provides a formatting key to help identify information as you
navigate through this Guide:
Example
Purpose
Click OK.
Within procedural (“how-to”) text, boldface words
are characters you type or elements you can click.
Within overview or conceptual text, bolded words
may simply represent concepts that have been
highlighted to emphasize their relative importance.
Go to the Add User page.
Within procedural text, numbered steps denote
actions that should be followed in sequence.
Click Save to save your
work.
Within procedural text, bulleted text denotes
available options. Within overview or conceptual
text, bulleted text also denotes supporting
information that is subordinate to the major topic
being discussed in the Guide.
Click Cancel to exit without
saving.
The light bulb icon denotes a helpful tip.
The information icon denotes reference material.
The note icon indicates definitions or
considerations that help you understand the
related task.
Introduction
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CPT-8061 Wireless
Scanner Overview
2.1 Access Point and Wireless Scanner Components
Before use the Furniture Wizard wireless scanner solution, it is important to understand the
individual components that comprise the system. Every component performs an important
data collection or communication task; each must be properly installed and configured so
they can successfully “talk” with each other. The Furniture Wizard wireless scanner solution
consists of the following components:
ƒ 3560 Bluetooth Access Point Receiver
ƒ CPT-8061 Charging and Communication Cradle
ƒ CPT-8061 Bluetooth Wireless Terminal (Scanner)
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.1 3560 Bluetooth Access Point Receiver
To use CIPHER Lab CPT-8061wireless scanners
with Furniture Wizard, you must have a 3560
Access Point receiver connected to your
network. One 3560 can accommodate up to
seven scanners. The primary purpose of the
unit is to receive Bluetooth transmissions from
the hand-held wireless scanners and then send
the captured inventory or sales data to the
Furniture Wizard software.
The Access Point itself connects to a local area
network using a standard RJ45 Ethernet cable.
New Vision Information Systems does not supply
this cable with the Access Point unit.
Figure 1: 3560 Access Point
Bluetooth Receiver
2.1.2 CPT-8061 Charging and Communication Cradle
Figure 2:
Cradle Used for Communications
and Battery Charging
6
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.3 CPT-8061 Bluetooth Wireless Terminal (Scanner)
The CIPHER Lab CPT-8061 Bluetooth Wireless Terminal (“wireless scanner”) is the heart
of the Furniture Wizard wireless scanning solution. It is an easy-to-use hand held unit
you will use to capture, and then transmit bar-code inventory and sales data, via a
wireless Bluetooth interface, to the 3560 Bluetooth Access Point receiver. Access Point
then passes this data on to the Furniture software, which in turn automatically updates
the appropriate inventory and sales forms.
(5) To scan a bar-coded item and
capture data, point the top of the
scanner towards the inventory item
and press the yellow Scan key
underneath the information
window. The red button lights up
when the unit is in the scanning
process, and beeps when it
completes scanning.
(2) Information window displays menus
containing configuration and scanner
function selections.
(4) Use the yellow Scan key to scan
and capture data from bar-coded
items.
(3) After using the keypad to select
menu options, press one of the
blue Enter keys to complete the
selection.
(1) Power Key
(6) Press the FN Alpha function key
and the 0 (zero) key at the same
time when transmitting captured
data to Furniture Wizard.
(7) When scanner is not in use, place
the bottom of the scanner in the
Charging cradle. When directed,
you will place the scanner into the
cradle to upload interface software
required for its proper operation
with Furniture Wizard.
Figure 3: CIPHER Lab CPT-8061
Bluetooth Wireless Terminal (Scanner)
Introduction
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Wireless Scanner – Furniture Wizard Interface
The following diagram illustrates how the CIPHER Labs CPT-8061 wireless scanner,
Access Point and Furniture Wizard connect and interact with each other:
Figure 4: Wireless Scanner - Furniture Wizard Interface
1
8
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Using Wireless Scanners
with Furniture Wizard
3.1 Overview
The Furniture Wizard bar-code scanning solution utilizes the CIPHER Lab CPT-8061
hand-held scanner and Furniture Wizard’s customized tags and allows capture of
inventory and sales data with unparalleled ease. The Bluetooth wireless communications
technology built into the scanner allows you to easily transmit the captured information to
Furniture Wizard.
This section contains detailed instructions on how to perform each of the inventory and sales
functions by scanning an item’s bar code with your CPT-8061 wireless scanner and transmitting
the information to Furniture Wizard.
Important Note!!!
Prior to using the CIPHER Lab CPT-8061 hand-held scanner with the Furniture Wizard
software, the necessary hardware and software components must be properly installed and
configured. If your components have not been delivered pre-configured from
Furniture Wizard, you must first complete all of the installation and configuration
steps outlined in Appendix A: Installation and Configuration! Contact Furniture Wizard
Technical Support if you need further assistance or have questions about the configuration
status of your wireless scanner components.
Regardless of the configuration status of your components, you must first complete the tasks
outlined in Section 3.2: Loading and Configuring the CIPHER Scanner Agent
Software and Section 3.3 Configuring Furniture Wizard for Scanner Use before any
scanners are used with Furniture Wizard in your operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Loading and Configuring CIPHER Scanner Agent Software
Furniture Wizard Software has created software called the CIPHER Scanner Agent that allows
a user to define “ports” that will be associated with each CPT-8061 scanner being used in
conjunction with Furniture Wizard. These ports collect scanner-specific information that has
been received by Access Point for use by Furniture Wizard. The CIPHER Scanner Agent must
be loaded and configured in the following manner:
1. Verify and record the IP Address of the PC on which the CIPHER Scanner Agent is being
loaded. To do this, access the Internet Protocol (TCP/IP) Properties page. Refer to the
Appendix section for more details.
Manually record the IP Address of the PC on which the CIPHER Scanner Agent is
being loaded in Section 3 (entitled “CIPHER Scanner Agent Ports”) of the Settings
Worksheet.
2. Log into the Furniture Wizard Support site and click the Download
WirelessScanner_Setup_xx.exe link. The following dialog is displayed:
Figure 5: File Download Dialog
3. Click Run and download WirelessScanner_Setup_219.exe to the server. This is a zipped
file that contains CIPHER Scan Agent and associated files. It is fairly large and takes several
minutes to download using a high speed Internet connection.
4. Once the software has been downloaded on to the PC, click Run to launch the Wireless
Scanner Setup program.
5. When the Cipher Agent Install Shield dialog appears, click Next, click I accept the terms
in the license agreement, and then click Next again.
10
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 10: Cipher Agent Install Shield Dialog (Second Screen)
6. When the next Cipher Agent Install Shield dialog appears, enter the user name
and organization, specify the user for which the application is being installed,
and then click Next.
Figure 11: Cipher Agent Install Shield Dialog (Third Screen)
7. When the final Cipher Agent Install Shield dialog appears, click Install to begin installation
of the Cipher Scanner Agent and associated files. When all files are installed, click Finish.
Chapter 3: Using Wireless Scanners with Furniture Wizard
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 12: Cipher Agent Install Shield Dialog (Final Screen)
8. After the CIPHER Scanner Agent has been completed loaded, double-click the CIPHER
Scanner Agent icon on the desktop, or launch it from the Programs menu.
Figure 13: CIPHER Scanner Agent Icon
9. After the CIPHER Scanner Agent launches, select Manage Scanner Ports Lists
from the File menu.
12
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 14: Manage Scanner Port Lists - CIPHER Scanner Agent
10.When the Manage Scanner Port Lists function appears, click Add to add new
scanner ports.
Figure 15: Manage Scanner Port List - Add New Port Address
Chapter 3: Using Wireless Scanners with Furniture Wizard
13
Download from Www.Somanuals.com. All Manuals Search And Download.
11.For each wireless scanner that will be used with Furniture Wizard, define a unique port
number using the Enter in New Port Address function. Each port number that is defined
must have a value between 1024 and 32500. This port will be assigned to specific scanners
later in this chapter. If you have multiple scanners configured for you by Furniture Wizard,
refer to the notes that came with your scanner as to what ports they have already been
configured to use. When finished entering a scanner port, click OK. When finished defining all
scanner port numbers, click OK in the Manage Scanner Port List function.
Manually record the port numbers you created in the CIPHER Scanner
Agent in Section 3 of the Settings Worksheet (entitled “CIPHER Scanner
Agent Ports”). You will need to assign a unique port number to each
CPT-8061 wireless scanner when configuring them later in this chapter!
12.The CIPHER Scanner Agent Status function displays the status of each port; it specifies if
the port is idle or waiting for a connection from a wireless scanner.
To exit this function, click Exit on the File menu.
Figure 16: CIPHER Scanner Agent Status Function
Optimizing and backing up the Furniture Wizard database is a critical task that must
be performed on a daily basis. However, you must exist the Cipher Scanner
Agent software or set the agent to “Sleep” before you run the Optimize All
or Optimize Data functions in Furniture Wizard, or back up your data!!
14
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Configuring Furniture Wizard for Scanner Use
You must now enable scanner use in Furniture Wizard. This section covers how to configure
the Furniture Wizard software to use captured data collected from the wireless scanners.
To do this, complete the following tasks:
1. Verify and record the IP Address of the PC on which the CIPHER Scanner Agent is being
loaded. To do this, access the Internet Protocol (TCP/IP) Properties page. Refer to the
Appendix section for more details.
2. Launch Furniture Wizard. When in the Main Menu, double-click the Furniture Wizard
logo to access the Setup & Registration function.
Figure 17: Furniture Wizard Main Menu
Double-click the “Wizard”
Chapter 3: Using Wireless Scanners with Furniture Wizard
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3. After double-clicking the Furniture Wizard icon on the Main Menu, the Setup &
Registration function is displayed:
Figure 18: Setup & Registration Function
Click Advanced Setup
4. When in the Setup & Registration function, click Advanced Setup. Click OK when the
warning message is displayed to access the Advance Setup function:
Figure 19: Advanced Setup Function
Click Extended Preferences
16
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When in the Advanced Setup function, click Extended Preferences. The following screen is
displayed:
Figure 20: Extended Preferences Function
Click Scanners tab
6. When in the Extended Preferences function, click the Scanners tab. The following function is
displayed:
Figure 21: Extended Preferences Function - Scanners tab
Chapter 3: Using Wireless Scanners with Furniture Wizard
17
Download from Www.Somanuals.com. All Manuals Search And Download.
7. When in the Scanners tab in the Extended Preferences function, do the following:
ƒ Cipher Scanner 8061 - Select the check box to enable use of the CIPHER Labs
CPT-8061 wireless scanner with Furniture Wizard.
ƒ Cipher Auto Inventory - Select the check box to enable use of the CPT-8061
scanner Auto Inventory functionality in Furniture Wizard.
ƒ Cipher Auto Orders - Select the check box to enable use of the CPT-8061 scanner
Auto Orders functionality in Furniture Wizard.
ƒ Cipher Auto Tag Floor - Select the check box to enable use of the CPT-8061
scanner Auto Tag Floor functionality in Furniture Wizard.
ƒ Cipher Auto Transfers - Select the check box to enable use of the CPT-8061
scanner Auto Transfers functionality in Furniture Wizard.
ƒ Cipher Auto RecPO’s - Select the check box to enable use of the CPT-8061 scanner
Auto Receive Purchase Orders functionality in Furniture Wizard.
8. When finished selected each of the check boxes related to CPT-8061 scanner processing
in Furniture Wizard, click Edit Cipher Users List to access the following function:
Figure 22: Cipher User List Function
18
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Use the Cipher User List function to define the users who are able to operate the Wireless
scanners in your operation. For each user, enter the following information:
ƒ User Name - Enter the name of the user.
ƒ Password - Specify up to a five digit numeric password for this user.
This is the password they will use to log on to the Firmware menu on
the CPT-8061 scanner. Do not use alpha characters - they are too difficult to
enter into the scanner. The passwords must be unique; no 2 accounts may have
ƒ Location - Select the location (Showroom or Warehouse) in which the user
can operate the scanner, or leave the field blank to allow operation in all
locations.
10.When finished entering all wireless scanner users, exit each of the forms to return back to
the Furniture Wizard main menu.
Congratulations!!!
You have successfully completed all of the tasks required to install and
configure Access Point and the CPT-8061 wireless scanners so they can
operate with Furniture Wizard. You can now proceed to Section 3.4
“Using Wireless Scanners with Furniture Wizard” to learn how to use
hand-held scanners to capture and transmit inventory and sales data to
Furniture Wizard.
Chapter 3: Using Wireless Scanners with Furniture Wizard
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Using Wireless Scanners with Furniture Wizard
The Furniture Wizard bar-code scanning
solution utilizes the CIPHER Lab CPT-8061
hand-held scanner and Furniture Wizard’s
customized tags and allows capture of
inventory and sales data with unparalleled
ease.
This section contains detailed instructions on
how to perform each inventory and sales
function with your CPT-8061 wireless scanner.
Figure 23: CPT-8061 Wireless Scanner
To use the CPT-8061 wireless scanner with Furniture Wizard, do the following:
1. Press the <Power> key to turn the scanner on. The Welcome to Scan-It banner appears
in the information window. After approximately 30 seconds, the Scanner Password function
(Figure 25) appears in the display window.
<Power> Key
Figure 24: Welcome Message
2. To log on to the Main Menu, enter your assigned password at Enter In User Password,
followed by the <Blue Enter> key.
20
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 25: Scanner Password Function
3. After entering your password, the Main Menu is displayed in the scanner information
window:
Figure 26: Firmware Main Menu
Chapter 3: Using Wireless Scanners with Furniture Wizard
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The Firmware Main Menu contains a series of options that allow you to perform the following
functions:
ƒ 1 Inventory - Allows you to take a physical inventory by pointing the scanner at
each labeled item and capturing the associated data. The inventory balances in
Furniture Wizard are then automatically updated with the captured data.
ƒ 2 Sale - Allows you to store a running total of items for a customer and
automatically transfer the captured list to a sales invoice.
ƒ 3 Tag Floor - Allows you to retag items for sales or markdown. The scanner stores
a list of items you picked, and Furniture Wizard uses that data to quickly generate
new tags.
ƒ 4 Transfer - Allows you to transfer items from one branch to another.
ƒ 5 ReceivePO - Allows you to Receive Purchase Orders.
ƒ 6 Teach - Allows you to “teach” Furniture Wizard to associate your internally-assigned
bar codes for specific inventory items to the UPC (Universal Product Code) codes
assigned by manufacturers to the items. This allows you to directly scan the
manufacturer’s bar code labels when receiving purchased items.
ƒ 7 Stock Check – Allows you to perform “hands-free” inventory stock checks in
Furniture Wizard simply by scanning the labels on an item.
ƒ 8 Configure - Allows you to perform scanner configuration tasks that are detailed
and completed in Appendix A: Installation and Configuration.
ƒ 9 Utilities - Contains utilities that are used on an infrequent basis.
4. Each of the Wireless Scanner menu functions is explained in detail in the sections that
follow. In general, you will perform the following tasks to select, perform and complete a
Firmware menu function:
ƒ Select the desired function on the Firmware menu, followed by the <Blue Enter> key.
ƒ To scan a bar-coded item and capture data, point the top of the scanner towards the
bar code label on item, and then press the yellow Scan key beneath the information
window. The red button above the screen lights up when the scanner is in the
process of capturing data, and it beeps when it completes the data capture.
ƒ After you have completed scanning of all desired inventory items, simultaneously
press the <FN Alpha> and <0> keys to transmit the captured data to Furniture Wizard.
Make sure you simultaneously press the <FN Alpha> and <0> keys at
the same time while transmitting the captured data to Furniture Wizard!
Failure to press <FN Alpha> at time of data transmission places the
scanner in alpha mode, which causes only a portion of the captured
data to be properly transmitted to Furniture Wizard!
22
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 27: Transmitting Capture Data to Furniture Wizard
Simultaneously Press <FN Alpha> + <0>
ƒ After the captured data has been transmitted by the scanner, it automatically
appears in the appropriate Furniture Wizard form. As directed, complete any
remaining data entry tasks.
Chapter 3: Using Wireless Scanners with Furniture Wizard
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Taking Physical Inventory - Inventory Function
(Selection 1)
The Inventory function in the scanner Main Menu (Selection 1) allows you to take
a physical inventory by pointing the scanner at each labeled item and capturing the
associated data. After the captured data has been transmitted to Furniture Wizard, the
inventory balances are automatically updated and adjusted accordingly.
Important Note!!!
Although you can scan several hundred items, in practice you should only scan a
limited group of items at one time. For example, you might scan one area of the
warehouse and then transmit the data. You can then append a group of items to the
current inventory session.
To select, perform and complete this function, do the following:
1. After logging on to the scanner, press <1> (Inventory), followed by the <Blue Enter> key.
2. To scan a bar-coded item and capture data, point the top of the scanner towards the
bar code label on item (Figure 42), and then press the yellow Scan key beneath the
information window, making sure the red laser light is beaming across the bar code.
The red button above the information window lights up when the scanner is in the
process of capturing data, and it beeps when it completes the data capture.
Figure 42: Small Tag
24
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. In general, the memory in the scanner unit is sufficient to store captured data for several
hundred items. If you are capturing inventory data for a large number of units in a large
physical space (for example, in a warehouse), transmit the captured data after completing
the scan of a portion of the stored inventory. For example, transmit the captured data after
you have completed scanning the northern section of a large warehouse, a corner section,
etc.
Do Not Attempt to Scan An Entire Store or Warehouse Branch All
at Once! You should do your inventory in smaller, easier to manage
segments, instead of trying to do the entire inventory branch at once.
This will be easier for both you and the scanner to manage.
4. Press
to view a listing of all scanned items. The total number of items scanned
displays at the bottom of the scanner window.
5. To view more information about the item, press the Scroll Right key below the Backspace
key to scroll right, and the Scroll Left key below the ESC key to scroll left.
6. Press
to return to the single item view. The most recent item viewed is displayed.
To display a different item, return to the list mode by pressing the Backspace key and
use the arrow keys to select the item you want to view.
7. After you have completed scanning of all desired inventory items, simultaneously press
the <FN Alpha> and <0> keys to transmit the captured data to Furniture Wizard.
8. After the scanner has transmitted the captured data, it automatically appears in the
Reconcile Inventory function in Furniture Wizard (Figure 43). To complete the inventory
transactions resulting from the captured data, specify the branch for which the inventory is
being entered and click OK.
Figure 43: Inventory Reconciliation Form
Chapter 3: Using Wireless Scanners with Furniture Wizard
25
Download from Www.Somanuals.com. All Manuals Search And Download.
9. When using this function, Furniture Wizard also gives you the opportunity to append the
scanned inventory transaction to a previous session. You would generally do this if you are
performing an inventory in segments, and wish to add the transactions scanned in a later
session to those scanned in an earlier session.
ƒ To do this, click Yes when the Append to an Existing Inventory Session dialog
box is displayed.
ƒ If you do not wish to append the transaction to those scanned in an earlier session,
click No.
10.Clicking Show All displays all inventory scanned, while clicking Show Differences displays
discrepancies.
11.Click Reconcile Report to create a report showing the quantity in stock according to
Furniture Wizard, the number scanned (actual count) and any difference between the two
numbers.
12.Take the necessary steps to determine the cause of the discrepancies.
13.When you have reconciled all of the data, or if you want to reconcile all except the
unresolved discrepancies, do one the following:
ƒ Select the check box next to each item you want to reconcile. Click an individual
item to select or “unselect” it.
ƒ Click Tag All to select all items
ƒ Click UnTag All to remove all check marks.
14.Click Update Inventory to update Furniture Wizard according to the reconciliation report.
Any inventory items with unresolved discrepancies will still be listed in the Inventory
Reconciliation function.
15.Click Exit when finished.
26
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Creating an Invoice – Sales Function (Selection 2)
The Sale function in the scanner Main Menu (Selection 2) allows you to create
an invoice for one or more inventory items. It allows you to store a running total of items
sold to a customer, and then automatically transfer the captured list to a sales invoice. This
allows you to easily and quickly capture data for an inventory item as it is sold, while you
continue your sales presentation to the customer. After the captured data is transmitted to
Furniture Wizard, it automatically generates a sales invoice for the customer, with minimal
data entry. When all purchase decisions are made, you transmit the data to your network
where the invoice is created and displayed on your workstation.
To select, perform and complete this function, do the following:
If you transmit the information before the customer has completed
their selections, subsequent invoices will be created for the additional
items.
1. Turn on the scanner and enter your password when prompted.
2. After logging on to the scanner, press 2 from the menu or use the scroll keys
to scroll to 2 (Sale), followed by the <Blue Enter> key.
3. To scan a bar-coded item and capture data, point the top of the scanner towards the bar code
label on the sold item, and then press the yellow Scan key beneath the information window.
The red button above the information window lights up when the scanner is in the process
of capturing data, and it beeps when it completes the data capture. In general, they in the
scanner unit is sufficient to store captured data for several hundred items; it will easily store
all the required data for virtually any sales transaction.
ƒ A single beep indicates that the item has been recorded.
ƒ A double beep indicates that the item is part of a package.
Chapter 3: Using Wireless Scanners with Furniture Wizard
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 46: Sales Scan Function
4. The value displayed in the lower right corner (in Figure 46, this is value (9)) of the Sales scan
function is the quantity in stock for the specified branch in the Cipher Users List. The Cipher
Users List is also where you have defined the User Name and Password for each person
using the scanner.
Listing All Scanned Items
Before transmitting the information, you can view a list of all items you have scanned for
the customer.
1. Press the Backspace key to view a list of items.
The total number of items scanned
and the total amount display at the bottom of the scanner window.
2. To view more information about the item, press the Scroll Right key below the Backspace
key to scroll right, and the Scroll Left key below the ESC key to scroll left.
Figure 29: Scroll Left / Scroll Right Keys
28
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmitting Captured Data to Furniture Wizard
1. After all purchase decisions have been made, hold down the FN Alpha function key while
simultaneously pressing the 0/* button to transmit the information to Furniture Wizard.
Figure 28: Function Key
2. The transmitted sales data automatically appears in the Invoice function in Furniture Wizard
(Figure 47).
Figure 47: Invoice Function
3. Press the Backspace key again to return to the single item view. The most recent item
viewed are displayed.
4. To display a different item, return to the List mode by pressing the Backspace key, and
then use the arrow keys to select the item you wish to view.
Chapter 3: Using Wireless Scanners with Furniture Wizard
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Item Quantity
You can change the quantity of a scanned item before it is transmitted. For example, if the
customer decides she wants two lamps instead of one, or if the customer decides he wants
one recliner rather than the other, you can delete the one already scanned.
1. Press the Scroll Up/Down keys
to scroll through items.
2. When the correct record is displayed, change the quantity.
3. Press the <Blue Enter> key.
If you change the quantity to 0 in order to delete the item, you will still see it
displayed in the Invoice function in Furniture Wizard, but the quantity
displayed is zero. You can then manually delete it from the invoice.
30
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Re-tagging Items for Sales or Markdown - Tag Floor
Function (Selection 3)
The Tag Floor function in the scanner Main Menu (Selection 3) allows you to retag items
for sales or markdown. The scanner stores a list of items you picked, and Furniture Wizard
uses that data to quickly generate new tags. To select, perform and complete this function,
do the following:
1. After logging on to the scanner, press <3> (Tag Floor), followed by the <Blue Enter> key.
2. To scan a bar-coded item and capture data, point the top of the scanner towards the bar code
label on the item that is being retagged, and then press the yellow Scan key beneath the
information window, making sure the red laser light is beaming across the bar code.
ƒ The red button above the information window lights up when the scanner is in the
process of capturing data.
ƒ A single beep indicates that the item has been recorded.
ƒ A double beep indicates that the item is part of a package.
3. Scan each item that is being retagged. In general, the memory in the scanner unit is
sufficient to store captured data for several hundred items; it will easily store all the required
data for virtually any retagging situation.
4. To view more information about the item, press the Scroll Right key below the Backspace
key to scroll right, and the Scroll Left key below the ESC key to scroll left.
5. Press the Backspace key to return to the single item view. The most recent item viewed is
displayed. To display a different item, return to the list mode by pressing the Backspace
key and use the arrow keys to select the item you want to view.
6. After you have completed scanning of all inventory items that you want to place on sale,
simultaneously press the <FN Alpha> and <0> keys to transmit the captured data to
Furniture Wizard. The transmitted inventory data automatically appears in the On Sale
function in Furniture Wizard (Figure 44). You can only access the On Sales function by
clicking On Sale in the Inventory function.
Chapter 3: Using Wireless Scanners with Furniture Wizard
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 44: Inventory - On Sale Function
7. Make sure there is a check in the Tagged field for each item being placed on sale.
8. The On Sale function contains the following fields or buttons that can be used to perform
the following processing tasks:
ƒ Set Sale Items By Discount (Retail) - Discounts all tagged items by a specific
percentage.
ƒ Set Sale Items By Margin (Cost) - Sets price by margin from cost.
ƒ Set Sale Items By Markup (Cost) – Sets price by markup from cost.
ƒ Percentage - Enter the percent of the discount.
ƒ Show All - Displays all items.
ƒ Show Only On Sale - Displays only sale items.
ƒ Show Not On Sale - Displays only items not currently on sale.
ƒ Round Retail – Rounds the retail price according to system settings.
ƒ Quick Tags - Opens the Quick Tag function from which you can print floor tags.
ƒ Create Tags - Prints new tags for the sale items.
ƒ Invert Tagged – Selects the check box for items that are not currently selected,
and clears the check box for currently selected items.
ƒ Show Tagged - Displays only those items that were scanned.
ƒ Tag All – Selects the check boxes for all items.
ƒ UnTag All – Clears the check boxes for all items.
ƒ Create New Retail Price - Use this button to create a new retail price independent
of sale information.
ƒ Apply Temporary Discount – Applies the price change to the sale items.
ƒ Restore Original Retail Price - Click this button to restore the retail price and
remove discounts.
9. You can set the sale price by discount from retail, margin on cost, or markup from cost.
Enter the discount percentage into the Percentage field, then click the Apply Temporary
Discount button.
10.To create the sale tags, click the Custom Tags button, select the desired label types, and
then click Print.
32
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.11 Transferring Items between Branches – The Transfer
Function (Selection 4)
The Transfer function in the Firmware menu (Selection 4) allows you to transfer inventory
items from one branch to another. The inventory balances maintained for each branch in
Furniture Wizard are then automatically updated with the captured data. For example, if five
sofas are being transferred from the Warehouse to the Showroom, the inventory balance
maintained in Furniture Wizard for the Warehouse automatically decreases by 5, while the
Showroom balance increases by 5 after the captured data for the sofa has been transmitted.
To select, perform and complete this function, do the following:
1. After logging on to the scanner, press <4> (Transfer), followed by the <Blue Enter> key.
2. To scan a bar-coded item and capture data, point the top of the scanner towards the bar
code label on item being transferred, and then press the yellow Scan key beneath the
information window, making sure the red laser light is beaming across the bar code. The red
button above the information window lights up when the scanner is in the process of
capturing data, and it beeps when it completes the data capture.
3. In general, the memory in the scanner unit is sufficient to store captured data for several
hundred items. If you doing a large scale transfer of inventory from one branch to another
(for example, from one warehouse to another) and are moving hundreds of different items,
transmit the captured data after completing the scan of a portion of the inventory being
moved.
4. After you have completed scanning of all desired inventory items, simultaneously press
the <FN Alpha> and <0> keys to transmit the captured data to Furniture Wizard.
5. After the scanner has transmitted the captured data, it automatically appears in the New
Inventory Transfer function in Furniture Wizard (Figure 45).
Figure 45: Inventory Transfer Function
Chapter 3: Using Wireless Scanners with Furniture Wizard
33
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Receiving Purchase Orders – Receive PO Function
(Selection 5)
The Receive PO function in the Firmware menu (Selection 5) allows you to receive items as
they are delivered to you. Furniture Wizard then determines whether the item has been
delivered in fulfillment of a purchase order, a special order, or isn’t on an existing purchase
order. If the item was not delivered in response to a purchase order, Furniture Wizard lets
you create a purchase order so that you can receive the item. This section of the document
contains the following subsections:
ƒ Label Setup
ƒ Receiving Items Using the Wireless Scanner
ƒ Processing a Scanned Item that is not in Furniture Wizard
ƒ Listing All Scanned Items
ƒ Reconciling Received Items
ƒ Received Items with No Associated Purchase Order
ƒ Processing Received Items
ƒ “Keyboard-less” Receiving Functions
Label Setup
Furniture Wizard provides you with the capability of printing a variety of different types of
labels (in a variety of sizes) for use during the receiving process. Prior to using the wireless
scanner to perform receiving functions, you can specify, per supplier, and/or per specific
inventory items, the desired sizing for each type of label. Tag sizes include label tag
(Figure), 1-inch labels (Figure), large price tags (Figure ), small price tags (Figure ), sold
warehouse labels (Figure) and regular warehouse labels (Figure). Sold warehouse tags
contain “sold-to” customer information for received items that are fulfilling special orders,
while regular warehouse tags are used to label items received into inventory (i.e., items
not associated with special orders).
Figure 40: Label Tag
34
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 40: 1” Label Tag
Figure 40: Large Price Tag
Chapter 3: Using Wireless Scanners with Furniture Wizard
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 40: Small Price Tags
Figure 40: Sold Warehouse Tag
36
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 40: Standard Warehouse tag
To specify label sizing at the supplier level, do the following:
Figure 45: Supplier Data Entry Function – Other Tab
Chapter 3: Using Wireless Scanners with Furniture Wizard
37
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Click Supplier on the Furniture Wizard Main Menu.
2. When in the Supplier function, select the desired supplier record, and then click the
Other tab.
3. In the Other tab, click the appropriate button for the desired default tag size for this
supplier. Please note that this only applies to inventory you will receive for this
supplier after this point; it does not retroactively apply to any items you have
already received or are in stock. To apply this default label setting to existing inventory
for the supplier, click Set as Default Tag Size, and then click Yes when the following
dialog is displayed:
Figure 45: Update All Inventory Items Dialog
Once you have specified label sizing at the supplier level, you can designate item
‘exceptions’; these are items for a specific supplier for which you wish to designate a
different label size. Do the following:
Figure 45: Inventory Function – Misc Tab
38
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Click Inventory on the Furniture Wizard Main Menu. When in the Inventory function, click
the Misc tab.
2. When in the Inventory function, select the desired item record, and then click the
Misc tab.
3. In the Misc tab, click the appropriate button for the desired default tag size, then select the
item (in the Model & Description section) to which it applies. Do this for all desired items
with exception label sizing.
Receiving Items Using the Wireless Scanner
To receive items using the wireless scanner, do the following:
1. Turn on the scanner and enter your password when prompted.
2. Select 5 from the menu or use the Scroll Up/Down keys
(Receive PO).
to scroll to 5
3. Point the scanner at the UPC or Furniture Wizard bar code on the item tag and press
the yellow scan button, making sure the red laser light is beaming across the bar code.
ƒ A single beep indicates that the item is assigned to a store inventory code.
ƒ A multi-tone beep indicates that this is a new item and the UPC code has not been
previously assigned to a Furniture Wizard inventory code.
You can scan a Furniture Wizard tag, or the manufacturer’s bar code.
4. After all inventory items have been scanned, hold down the Function
key while
simultaneously pressing the 0/* button to transmit the information to Furniture Wizard.
Processing a Scanned Item that is not in Furniture Wizard
A multi-tone beep indicates that this is a new item and the UPC code has not been
previously assigned to a Furniture Wizard inventory code. The following message appears
in Furniture Wizard after you have transmitted the data:
Figure 30: Furniture Wizard Error Message
Chapter 3: Using Wireless Scanners with Furniture Wizard
39
Download from Www.Somanuals.com. All Manuals Search And Download.
To resolve this in Furniture Wizard, do the following:
1. When this message appears in Furniture Wizard, click OK.
2. The item then displays on the Cipher Data Manager function with a 0 entry in
the Item Number field.
Figure 31: Cipher Data Manager Function in Furniture Wizard
3. Double-click the Item Number field to access the Inventory Lookup function.
Figure 32: Inventory Lookup Function
4. Double-click the Model field and enter the model number.
5. Double-click the correct record in the list.
40
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click the UPC/SYNC button. The following message is displayed when the record is
synchronized:
Figure 33: UPC/SYNC Complete Message
7. The Cipher Data Manager now displays a model item without the UPC code.
Figure 34: Cipher Data Manager Function
8. Click the Exit button when finished.
Listing All Scanned Items
Before transmitting the information, you can view a list of all items you have scanned by
doing the following:
1. Press the Backspace key to view a list of all items. The total number of items scanned
displays at the bottom of the scanner window.
2. To view more information about the item, press the Scroll Right key below the Backspace
key to scroll right, and the Scroll Left key below the ESC key to scroll left.
Figure 35: Scroll Left / Scroll Right Keys
3. Press the Backspace key again to return to the single item view. The most recent item
viewed will display.
4. To display a different item, return to the list mode by pressing the Backspace key, and
then use the arrow keys to select the item you want to view.
Chapter 3: Using Wireless Scanners with Furniture Wizard
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Reconciling Received Items
After the inventory data has been transmitted, the Reconcile Inventory function
appears in Furniture Wizard.
Figure 36: Recocile Receiving Function
1. All items you scanned are displayed in the list. If there are multiple quantities for
same item, you will see the total number displayed in the Qty Scanned field in
the Items Available for Processing list.
2. To display outstanding purchase orders for a specific item, click the desired item
number.
3. Select the purchase order associated with this item. Any notes associated with the
purchase order appear in the lower left corner of the function.
4. To remove the item from the Items Available for Processing list, click the Queue
Receiving Items button. If there are multiple quantities for the same item, the
quantity is reduced by one.
5. Continue this process until all inventory items have been queued.
42
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Received Items with No Associated Purchase Order
If no purchase order is associated with an item, it will remain in the Items Available for
Processing list with no corresponding purchase order. To create a purchase order for a
received item, do the following:
1. Select the Not Assigned tab in the Reconcile Inventory function.
2. Select the corresponding item in the Items to be Processed list. An arrow appears to
the left of the selected item.
3. Click the Create PO button to create a purchase order for the selected item.
Processing Received Items
Once all inventory items have been assigned to a purchase order, you can process the
received items in Furniture Wizard by doing the following:
1. Select the Items to be Processed tab in the Reconcile Inventory function.
2. Click the Process Receiving button; the Print Receiving Labels function is displayed.
Figure 37: Reconcile Receiving Function
3. For each item, select one or more of the label types. You can also click Select All
to select all labels or click Select None to deselect all.
Chapter 3: Using Wireless Scanners with Furniture Wizard
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The Reconcile Inventory function contains the following fields or buttons that can
be used to perform the following label processing tasks”
ƒ Select All - Select all label types for all items.
ƒ Select None - Deselect all label types for all items.
ƒ Update Inv Label - Update Inv Labels with current information for all selected
items.
ƒ Update Small - Update small labels with current information for all selected items.
ƒ Update Label - Update Labels with current information for all selected items.
ƒ Print Inv Label - Print inventory labels for all selected items.
ƒ Print Small - Print small labels for all selected items.
ƒ Print Label - Print labels for all selected items.
ƒ Print All - Print all label types for all selected items.
ƒ Print - Send labels to printer.
ƒ Print Preview - Display a print preview screen for all selected label types and
items.
ƒ Inv Label – Creates a warehouse tag. If the item is sold, customer information
prints on the label.
Figure 38: Inventory Label
44
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
ƒ Small – Prints an inventory label that includes the purchase order number and
associated information.
Figure 39: Small Inventory Label
ƒ Label – Creates a floor tag.
Figure 40: Floor Tag Label
5. After selecting the desired label type, click Print.
6. Click Exit. You will be given the option to save the data.
Figure 41: Floor Tag Label
7. If you want to print the label later, click Yes. Click No to print the label now and discard the
information; the Inventory function is displayed.
8. Click Exit to close the Inventory function and return to the Main Menu.
Chapter 3: Using Wireless Scanners with Furniture Wizard
45
Download from Www.Somanuals.com. All Manuals Search And Download.
“Keyboard-less” Receiving Functions
Figure 40: Bar Code Receiving Report
As of Version 10 (and above), an exciting new feature has been added to Furniture Wizard
that allows you to perform “keyboard-less” receiving. A Bar Code Receiving Report (Figure
), containing bar coding for the purchase order and for each purchase order can now
printed for use by warehouse personnel. They can now receive purchased inventory simply
by scanning the bar codes printed on this report for the purchase order number and each
items they receive from the supplier.
46
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 40: Purchase Order Function – Bar Code Report Button
To print the Bar Code Receiving Report for use during inventory receiving, do the following:
1. Enter a purchase order in the normal manner in the Purchase Order function. Refer to the
Furniture Wizard User Guide for more details.
2. After selecting all desired purchase order items in the Purchase Order function, click the
Bar Code Report button to print the Bar Code Receiving Report for the purchase order.
When the purchased items are delivered at your facilities, do the following to perform
“keyboard-less” receiving:
1. Turn on the scanner and enter your password when prompted.
2. Select 5 from the menu or use the Scroll Up/Down keys
to scroll to 5 (Receive PO).
3. Point the scanner at the purchase order number bar code printed on the top of the Bar Code
Receiving report. If this step is not performed, Furniture Wizard will consider this to
be a normal purchase receipt (not a “keyboard-less receiving session).
Chapter 3: Using Wireless Scanners with Furniture Wizard
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To receive each individual purchased item, point the scanner at the bar code printed on the
report for the corresponding item. You must perform a separate capture equal to the
quantity received for each item (for example, if a quantity of four is received for an item,
you must perform a scanner capture for each quantity.
You must pause for a reasonable amount of time between scanning
each bar code quantity capture so that the scanner can process each
received item!
5. After all inventory items have been scanned, hold down the Function
key while
simultaneously pressing the 0/* button. The following Print Tags menu is then displayed
on the scanner.
Figure 40: Print Tags Scanner Menu
6. The Print Tags scanner menu contains selections that allow you to perform the following
functions:
ƒ Print warehouse tags for the received items.
ƒ Print tags for the items.
ƒ Print a Wireless Scanner Receiving Report.
ƒ Process the received inventory and exit the scanner.
48
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 40: “Sold” Warehouse Tag
7. To print warehouse tags for the received items, select 1 (Warehouse) on the Print Tags
scanner menu. If the item is sold (special order), customer information prints on the label.
If the item is not associated with order, a regular warehouse tag is printed (Figure).
Figure 40: Regular Warehouse Tag
Chapter 3: Using Wireless Scanners with Furniture Wizard
49
Download from Www.Somanuals.com. All Manuals Search And Download.
ƒ 1 Warehouse –.
ƒ 2 Auto Print - Allows you to print price tags for the received items. The size of the
printed tags is dependent on the label sizes you designated in the Purchase Order
and Inventory functions for the supplier and/or specific item number.
ƒ 3 Rec Report – Allows you to print a Wireless Scanner Receiving Report (Figure )
containing information for each received item. If an item was over-received
(quantity received is greater than quantity ordered, an Over Received warning
message is printed on the report. Note that you cannot print the
ƒ 4 Process/Exit – Processes the received inventory and then exits the menu.
Figure 40: Wireless Scanner Receiving Report
50
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Associating UPC and Bar Codes – Teach Function (Selection 6)
The Teach function in the Firmware menu (Selection 6) allows you to “teach” Furniture Wizard
to associate your internally-assigned bar codes for specific inventory items to the UPC
(Universal Product Code) codes assigned by manufacturers to the items. This allows you
to directly scan the manufacturer’s bar code labels when receiving purchased items. To
accomplish this, do the following:
1. Turn on the scanner and enter your password when prompted.
2. Select 6 from the menu or use the Scroll Up/Down keys
(Receive PO).
to scroll to 5
3. Point the scanner at the UPC or Furniture Wizard bar code on the item tag and press
the yellow scan button, making sure the red laser light is beaming across the bar code.
ƒ A single beep indicates that the item is assigned to a store inventory code.
ƒ A multi-tone beep indicates that this is a new item and the UPC code has not been
previously assigned to a Furniture Wizard inventory code.
Chapter 3: Using Wireless Scanners with Furniture Wizard
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8 Performing Stock Checks – Stock Check Function
(Selection 7)
The Stock Check function in the Firmware menu (Selection 6) allows you to perform “hands-
free” inventory stock checks in Furniture Wizard simply by scanning the labels on an item.
To accomplish this, do the following:
1. Turn on the scanner and enter your password when prompted.
2. Select 6 from the menu or use the Scroll Up/Down keys
PO).
to scroll to 5 (Receive
3. Point the scanner at the UPC or Furniture Wizard bar code on the item tag and press the
yellow scan button, making sure the red laser light is beaming across the bar code.
ƒ A single beep indicates that the item is assigned to a store inventory code.
ƒ A multi-tone beep indicates that this is a new item and the UPC code has not been
previously assigned to a Furniture Wizard inventory code.
Chapter 3: Using Wireless Scanners with Furniture Wizard
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Appendix A: Installation
and Configuration
4.1 Overview
Important Note!!!
You must complete the steps in this chapter only if your scanner components
have not been delivered pre-configured from Furniture Wizard Software.
Once you have successfully completed the tasks outlined in each section of this
chapter, you can proceed to Chapter 3: Using Wireless Scanners with Furniture
Wizard to learn how to use hand-held scanners to capture and transmit inventory
and sales data to Furniture Wizard.
Prior to using the CIPHER Lab CPT-8061 hand-held scanner with Furniture Wizard, you must
first install and configure the necessary hardware and software components. This chapter
leads you through the required tasks, which include installing hardware, uploading the
required interface software, configuring each scanner and then enabling scanner use in
Furniture Wizard. This chapter includes the following sections:
ƒ 4.2 Installing the Required Hardware - This section covers the preparation and
installation of Access Point and the CPT-8061 wireless scanners.
ƒ 4.3 Uploading Firmware Update to Scanners - This section explains how to
upload the firmware update to each wireless scanner that allows them to “talk” to
Furniture Wizard.
ƒ 4.4 Pairing Wireless Scanners with Access Point - This section explains how to
pair each wireless scanner with each Access Point in the network.
ƒ 4.5 Configuring Wireless Scanners - This section covers how to properly configure
each of the wireless scanners so they can communicate with Access Point and
successfully transmit collected data to Furniture Wizard.
ƒ 4.6 Configuring Furniture Wizard for Scanner Use - This section covers how to
configure the Furniture Wizard software to use captured data collected from the
wireless scanners.
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Installing the Required Hardware
4.2.1 Preparing CPT-8061 Scanner Units
Prior to configuring CPT-8061 wireless scanners for use with Furniture Wizard, you must
prepare each individual unit for use by installing and charging its lithium ion battery pack.
While the supplied battery pack comes with an initial charge sufficient to perform some very
basic tasks, it is not sufficient for extended use or for the initial software upload and
configuration activities that must be performed for each unit. The battery pack must be fully
recharged prior to initial use; this takes approximately 6 hours. To charge each unit and
prepare it for use, perform the following tasks:
1. Unpack the wireless scanner, Charging and Communications cradle, serial cable, black power
supply (labeled as a switching adapter), rechargeable lithium ion battery pack and power
cord. If battery pack has not been installed, first remove the rear cover of the scanner (by
depressing the black button located at the bottom of the rear cover) and install the lithium
ion battery, making sure that the metal prongs on the bottom of the battery pack make firm
connections with the metal contacts (located at the bottom of the scanner battery well).
Replace the cover when finished.
Figure 48: Rechargable Lithium Ion Battery Pack
2. Plug the cable end of the black power supply into the circular receptacle located in the lower
right corner on the back of the Charging and Communications cradle.
3. Place the connector end of the AC power cord into the receptacle located on the other side
of the power supply. After connecting the power cord, power supply and cradle together,
plug the power cord into a standard wall outlet.
56
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Place the CPT-8061 scanner facing forward into the large slot located at the top of the
Charging and Communications cradle. The metal contacts located on the bottom of the
scanner unit must make firm connection with the metal prongs located in the large slot.
Leave the nylon hand cord (attached to the lower left corner of the scanner) hanging out
the left side of the cradle.
Figure 49: Scanner Resting in Charging Cradle
5. The battery pack must be fully charged prior to initial use; this takes approximately 6 hours.
While the unit is charging in the cradle, a Charging message appears in display window on
the front of the scanner; a Battery Full message displays in the window when the unit is
fully charged.
6. Later in this chapter, you use the cradle to upload Scan-IT interface software into the
scanner that is required for its proper operation with Furniture Wizard. To prepare the cradle
for this process, do the following:
ƒ Plug the flat prong end of the supplied serial cable into the flat receptacle located on
the back of the Charging and Communication cradle.
ƒ Plug the serial connector end of the cable into the serial port of the PC from which the
software will be loaded.
Once the required software has been uploaded to each scanner unit, this serial
connection is not necessary for daily operation of the scanner. You may have to utilize
this connection on an occasional basis to load software updates to the scanner units
as they are released in the future.
Important Note!!!
Once you have successfully completed upload of the firmware update to each
scanner, store the serial cable in a safe location and do not lose it! You will
need to use it at a later date for uploading of the firmware update to each scanner
when enhanced by Furniture Wizard Software! Refer to the Scanner Kernel and
Firmware Update directions found in the Appendix section of this manual for
details on how to update each wireless scanner when software updates are released
in the future.
Appendix A: Using Wireless Scanners with Furniture Wizard
57
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.2 Installing and Configuring Access Point
After preparing each CPT-8061 wireless scanner, you must install and configure the
3560 Bluetooth Access Point receiver. The 3560 Access Point unit contains a Bluetooth
radio module that acts as a bridge between the wireless scanners and your local area
network, allowing them to communicate with each other using short-range wireless
technology operating in the 2.4 GHz band. Each Access Point allows up to seven wireless
scanner units to communicate with your local area network. More than one Access Point
can be installed in your network to support use of a large number of wireless scanners.
4.2.2 Access Point Receiver Functions
Figure 50: Access Point Functions
58
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.4 Installation and Configuration Procedures
The installation and configuration tasks required for Access Point involve preparing the
receiver unit, connecting it to your local area network and then configuring the unit for
proper network communications. To successfully perform these tasks, you must have access
to, or know the following settings for the local area network used in conjunction with
Furniture Wizard in your operations:
ƒ IP Address
ƒ Subnet Mask
ƒ Default Gateway
ƒ DNS Server
To install and configure Access Point on your local area network, perform each of the
following tasks:
1. Unpack the Access Point receiver unit, black power supply and power cord.
A standard RJ45 Ethernet network cable is required to connect the Access Point
to the local area network; this cable is not supplied with the unit. Plug one end of the
network cable into the receptacle labeled 10 BASE-T in the rear center of the Access Point.
Plug the other end of the network cable into the network server or
hub for your local area network.
2. Plug the cable end of the black power supply into the circular receptacle (labelled
DC IN 9V) located in the right rear corner of the Access Point receiver. Place the connector
end of the AC power cord into the receptacle located on the other side of the power supply
and then plug the power cord into a standard wall outlet.
3. After connecting Access Point to your local area network and powering up the unit,
it must be configured with the correct settings to allow it to properly communicate with your
network. Access Point is delivered from the factory with a standard IP address of
192.168.1.1 (the default address for Linksys routers). To test for proper communications
between your local area network and Access Point, you will perform the following tasks
(they are explained in detail in Steps 4 through 14):
ƒ Temporarily change the TCP/IP settings for your local area network to match the
default settings supplied with Access Point by CIPHER Lab.
ƒ Verify that Access Point and your network can “talk” with each other.
ƒ Reset the TCP/IP settings for your LAN to their original settings.
ƒ Configure the TCP/IP settings for Access Point so it can successfully communicate
with the original settings for your LAN.
Appendix A: Using Wireless Scanners with Furniture Wizard
59
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To temporarily change the TCP/IP settings for your local area network to match the default
settings supplied with Access Point by CIPHER Lab, locate the Properties page for your
current network card. To do this, click Control Panel > Network Settings in the Start
menu in Windows XP. Right click the icon for the local area network to which Access Point is
being connected and then click Properties (Figure 51).
Figure 51: Network Properties
5. When in the Local Area Connection Properties page (Figure 52), select Internet Protocol
(TCP/IP) and then click OK.
Figure 52: Local Area Connection Properties
60
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 53: Internet Protocol (TCP/IP) Properties Page
Original TCP/IP Network Settings
6. Once you have accessed the Internet Protocol (TCP/IP) Properties page (Figure 53), do the
following:
ƒ Manually record each of the network settings, as they are presently displayed in the
Properties page, in Section 1 of the Settings Worksheet (entitled “Current
Local Area Network Settings”); this worksheet can be found in the Appendix
section of this manual. Manually recording these settings is critical to the
successful setup of your wireless network! You will be setting your local area
network back to its original settings after testing for proper communications with
the Access Point receiver.
Failure to record your original network settings in Section 1 of the Settings
Worksheet will result in possible interrupted (or failed) operation of your local
area networking operations!!
ƒ Note that if your TCP/IP configuration is set to Obtain IP Address Automatically
or Obtain DNS Server Address Automatically (Figure 54), you will first need to
re-configure your network to use static IP addresses because the scanner units
require use of static IP addresses that will not change.
If you are unsure of how to reconfigure your network to use static IP addresses,
please contact a local network technical expert for further assistance!!
Appendix A: Using Wireless Scanners with Furniture Wizard
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 54: Network Set to Obtain IP/DNS Addresses Automatically
7. Change the IP Address, Subnet Mask and Default Gateway settings to match those
pictured in Figure 55 (below), and then click OK to save the new settings and exit the page.
Figure 55: TCP/IP Properties for Local Area Network
62
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
8. After temporarily changing the TCP/IP settings in your local area network, test whether it can
communicate with Access Point. To do this, click All Programs > Accessories > Command
Prompt in the Start menu in Windows XP. At the Command Prompt, type Telnet
192.168.1.1.
The following message is displayed if communications are successful (that is, your
local area network can “see” and “talk” to Access Point):
Figure 56: Successful Communications Message
9. If the communications test was successful, skip immediately to Step 10 below. If the test was
not successful (that is, the network was unable to “talk” to Access Point), do the following:
ƒ Reset Access Point to its original default settings then perform the tasks in Step 7 to
re-test the network communications. To do this, first power down the unit by
removing the power cord from the circular receptacle (labelled DC IN 9V) located in
the right rear corner of the Access Point receiver.
ƒ After powering off the unit, straighten a paper clip and use it to reset the unit. To do
this, press one end of the paper clip into the small Reset receptacle (to the left of the
10 Base-T connector receptacle) for at least five seconds. While resetting the unit,
plug the power cord back into the DC IN 9V receptacle. Once this has been
completed, retest the communications.
10.Once you can successfully communicate with the Access Point, press Enter to proceed to the
Cipher Lab 3560 Configuration Menu (Figure 57).
Figure 57: Cipher Lab 3560 Configuration Menu
Appendix A: Using Wireless Scanners with Furniture Wizard
63
Download from Www.Somanuals.com. All Manuals Search And Download.
11.When in the menu, enter 1 to configure Access Point. The following menu is then displayed
(Figure 58):
Figure 58: Access Point Configuration Settings
12.You must enter the correct network configuration settings for your Access Point receiver into
this menu. Press any key to enter the following parameters; refer back to the original
network settings you recorded in Section 1 of the Settings Worksheet (back in Step 4) when
doing so:
As you enter each of these settings into Access Point, manually record them in
Section 2 of the Settings Worksheet (entitled “Access Point Settings”). You will
need to enter some of these settings into each CPT-8061 wireless scanner when
configuring them later in the chapter!
ƒ New IP: Enter an IP address in the same range as used in your local area network;
however an unused one must be specified. For example, if 192.168.254.40 was
used in the original setting, enter 192.168.254.205.
ƒ New Subnet Mask: Enter the original Subnet Mask setting recorded in Step 4.
ƒ New Router IP: Enter the original Default Gateway setting recorded in Step 4.
ƒ New Name: Enter a user-assigned name (for example, FurnWiz) for the Access
Point receiver.
ƒ New PIN Code: Enter a unique five digit number (no alpha characters) to password
protect the IP Address and Subnet Mask settings for the Access Point. Write the PIN
down and don’t loose it!
ƒ Authentication: Set this to 1 (Enable).
ƒ After completing all entries, press <Exit> to exit the Configuration menu, then close
the Telnet session.
13.Reset the Internet Protocol (TCP/IP) Properties page for your local area network back to the
original network settings you recorded in Section 1 of the Settings Worksheet. Refer
to steps 4 through 6 for details on how to do this.
64
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Test your local area network to ensure it can communicate with Access Point by
doing the following:
ƒ Click All Programs > Accessories > Command Prompt in the Start menu in
Windows XP.
ƒ At the Command Prompt, type Telnet n.n.n.n (where n.n.n.n is the IP Address
assigned to Access Point in Step 12).
The following message is displayed if communications are successful (that is,
your local area network can “see” and “talk” to Access Point).
Figure 59: Successful Communications Message
15.If the message in Figure 59 does display (that is, communications are successful),
close the Telnet session. If it does not display, follow the directions in Step 8 (above).
Appendix A: Using Wireless Scanners with Furniture Wizard
65
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Uploading Firmware Updates to Scanners
Furniture Wizard Software has also created a firmware update that is designed to reside
on each wireless scanner. The firmware update allows the scanner to capture inventory
and sales data and then transmit in a format that can be used in Furniture Wizard (that
is, it allows the scanners to “talk” to Furniture Wizard). It must be uploaded to each
CPT-8061 scanner unit via a serial port connection between the PC and the Charging
and Communications cradle. After the software has been uploaded, each wireless
scanner must be properly configured to work with Furniture Wizard. To upload the
firmware update to each wireless scanner, perform each of the following tasks:
1. Step 6 in Section 4.2.1 (Preparing CPT-8061) provides instructions on how to connect
the Charging and Communications cradle (Figure 60) to the serial port of the PC from which
the firmware update will be loaded. If you have not already performed each of the tasks
outlined in Step 6, they must be completed at this time. The PC can only update the
software on the scanner using the serial cable and Communications cradle.
Figure 60: Charging and Communications Cradle
Connect serial cable between PC and
serial receptacle on the back of this unit
2. Place the CPT-8061 scanner facing forward into the large slot located at the top of the
Charging and Communications cradle. The metal contacts located on the bottom of the
scanner unit must make a firm connection with the metal prongs located in the large slot at
the top of the cradle. Leave the nylon hand cord attached to the lower left corner of the
scanner) hanging out the left side of the cradle.
Figure 61: Scanner Resting in Charging Cradle
66
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. To access the proper scanner menu to start the software upload process, simultaneously
press the <7> and <9> keys and the <Power> key in the lower right front corner of the
scanner. When the System Menu appears, press <6> (Load Program).
Figure 62: Accessing Wireless Scanner Main Menu
Simultaneously Press <7> + <9> + <Power>
Appendix A: Using Wireless Scanners with Furniture Wizard
67
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When the Load Program menu appears, press <1> (Cradle - IR).
Figure 63: Load Program Menu
Select <1> (Cradle - IR)
5. When the Baud Rate menu appears, select the fastest baud rate. In this case, press <1>
(115200).
Figure 64: Baud Rate Selection
68
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. When the Please Place in Cradle *Download Ready* message appears in the display
window, place the scanner facing forward into the large slot at the top of the Charging and
Communications cradle:
Figure 65: Please Place in Cradle Message
7. Load the firmware update CD provided by Furniture Wizard Software..
8. After loading the firmware update CD, the following communications port and baud rate
information appears in the display window on the scanner. This allows you to verify previous
input into the scanner. Click OK to continue the software upload process.
Figure 66: COM Port Properties Dialog
Appendix A: Using Wireless Scanners with Furniture Wizard
69
Download from Www.Somanuals.com. All Manuals Search And Download.
9. During the software upload process, a Please Wait Loading message appears in the
display window on the scanner, and a progress bar appears on the connected PC. When the
process is finished, a Downloaded Completely” Do you want to download another
program? message appears in the display window on the scanner:
Figure 67: Download Complete Message
10.Click No to complete the download process. Press any key and power the unit off
by pressing the <Power> key when the following message is displayed:
Figure 68: Complete - Power Off Message
70
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Pairing Wireless Scanners with Access Point
The next step in the installation and configuration process is to pair each wireless scanner
with each Access Point receiver in your wireless scanner network. This allows a wireless
scanner to successfully maintain contact with a network as it passes in and out of the
communications ranges of specific Access Point units; this is of particular importance in
operations with large physical spaces.
1. To access the proper scanner menu to start the pairing process, simultaneously press the
<7> and <9> keys and the <Power> key in the lower right front corner of the scanner.
When the System Menu appears, press <7> (Bluetooth Menu), followed by the <Blue Enter>
key.
Figure 69: Accessing Wireless Scanner Main Menu
Simultaneously Press <
7
> + <
9> + <Power>,
When in System Menu, press <
7>, followed by <Blue Enter>
Appendix A: Using Wireless Scanners with Furniture Wizard
71
Download from Www.Somanuals.com. All Manuals Search And Download.
2. When in the Bluetooth Menu, select <5> (Pairing Test), followed by the <Blue Enter> key.
Figure 70: Bluetooth Menu
Press <5>, followed by <Blue Enter>
3. The scanner will now wait for a few moments while it searches for available Bluetooth
(Access Point) devices. The name of the Access Point should appear up in the list of available
devices in the scanner display window.
4. Select the Access Point you have just configured, and press the <Blue Enter> key.
5. You will now be presented with a menu asking for both Authentication and Access PIN.
ƒ Select Authentication and press the <Blue Enter> key.
ƒ Press <1> to enable Authentication, then press <Esc>.
ƒ Press the <Down Arrow> key to select Pin Code, and press the <Blue Enter> key.
ƒ Enter the PIN code previously assigned to Access Point (in Step 4 in Section 4.2.2),
then press <Esc>. You can also find the PIN code in Section 2 of the Settings
Worksheet.
72
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. The scanner will now attempt to pair itself with the Access Point.
ƒ When complete, the message Pairing Successful will appear in the scanner display
window.
ƒ If scanner pairing fails, repeat the steps above, making sure you have enabled
Authentication and you have entered the PIN code exactly as it was when it was
originally entered during Access Point configuration.
7. Once the pairing process is successful, power the scanner off by pressing the <Power>
key, then press the <Power> key again to turn it back on and proceed with the scanner
configuration process.
4.5 Configuring Wireless Scanners
After you have uploaded the Scan-IT interface software to the CPT-8061 wireless scanners
and paired them with Access Point, you must now configure each scanner so it can
communicate with Access Point and your local area network. To do this, perform the
following tasks:
1. Press the <Power> key to turn the scanner back on. To signify that new software
has been uploaded to a scanner, the unit emits three loud beeps the first time it is
powered on after a software installation. The following message is also displayed in the
scanner information window:
Figure 71: New Program Message
Displays Upon Startup after Program Installation
Appendix A: Using Wireless Scanners with Furniture Wizard
73
Download from Www.Somanuals.com. All Manuals Search And Download.
2. To continue using the scanner, press any key to continue. The Welcome logon appears in
the information window. During the initial software loading process, press the <ESC> key
to access the Main Menu. Upon powering up the scanner after completing all scanner
configuration tasks, this display will also contain User Name and Password fields that you
will use to logon to Furniture Wizard scanning functions. They do not appear during the first
time powerup after uploading the Scan-IT interface software.
Figure 72: Welcome Message
3. At the Main Menu, press <6> (Configure) to access the software configuration options for
the scanner.
Figure 73: Main Menu
Select 5 (Configure option)
74
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The WLAN settings menu (Figure 74) contains a series of option selections that you will use
to configure communications settings for the scanner unit:
Figure 74: WLAN Settings Menu
Select each option and enter correct LAN settings
5. You must now configure each scanner so it can successfully communicate with Access Point
and your local area network by entering the following settings:
ƒ Subnet Mask
ƒ Local IP Address
ƒ Gateway
ƒ DNS Server
ƒ Server IP
ƒ Server Port
Many of the network settings you will enter for the following menu options
are dependent on your local area network, Access Point and CIPHER Scanner
Agent settings you previously recorded in the Settings Worksheet when
performing the tasks in Section 4.2.2 (Installing and Configuring Access
Appendix A: Using Wireless Scanners with Furniture Wizard
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Point). The text below will direct you to specific sections of the Settings
Worksheet for entry of the requested values.
4.5.1 Subnet Mask Setting
1. To specify the Subnet Mask setting for the scanner, press <1> in the WLAN Settings menu.
The current Subnet Mask setting setting for your local area network displays in the scanner
information window (Figure 75):
Figure 75: SubNet Mask Setting
2. Enter the Subnet Mask setting for the wireless scanner into the New field, then press the
<Blue Enter> key to save the setting and return to the WLAN Settings menu. It must
match the Subnet Mask setting previously assigned in Step 12 in Section 4.2.2 (Installing
and Configuring Access Point). Use the Access Point Subnet Mask setting
in Section 2 of the Settings Worksheet.
76
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5.2 Local IP Address Setting
1. To specify the local IP address for the scanner, press <2> in the WLAN Settings menu. The
current local IP address setting for your local area network displays in the scanner
information window (Figure 76):
Figure 76: Local IP Address Setting
2. Enter the local IP address for the wireless scanner into the New field, then press the
<Blue Enter> key to save the setting and return to the WLAN Settings menu. The specified
local IP address must in the same range as used in your local area network; however an
unused one must be specified. For example, if 192.168.254.100 was used in the
original setting, enter 192.168.254.101. Refer to the LAN IP Address setting in Section
1 of the Settings Worksheet.
Record the IP address you assigned to the scanner in the Assigned
Scanner IP field in Section 3 (CIPHER Scanner Agent Port Settings)
of the Settings Worksheet. Record it next to the server port you will be
assigning to the scanner in Step 16 in Section 2.7.6 (Server Port Address
Setting) below.
Appendix A: Using Wireless Scanners with Furniture Wizard
77
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5.3 Gateway IP Address Setting
1. To specify the Gateway IP address for the scanner, press <3> in the WLAN Settings menu.
The current Gateway IP address setting for your local area network displays in the scanner
information window (Figure 77):
Figure 77: Gateway Address Setting
2. Enter the Gateway IP address for the wireless scanner into the New field, then press the
<Blue Enter> key to save the setting and return to the WLAN Settings menu. The specified
Gateway IP address must match the IP address of your Access Point receiver. Use the
Access Point IP Address setting in Section 2 of the Settings Worksheet.
4.5.4 DNS Server Setting
1. To specify the DNS Server setting for the scanner, press <4> in the WLAN Settings menu.
The current network DNS Server setting displays in the scanner information window (Figure
78):
Figure 78: DNS Server Setting
2. Enter the IP address for the DNS Server into the New field, then press the <Blue Enter>
key to save the setting and return to the WLAN Settings menu. The specified DNS Server IP
address must match the DNS Server setting of your local area network. Use the LAN DNS
Server setting in Section 1 of the Settings Worksheet.
78
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5.5 Server IP Setting
1. To specify the Server IP setting, press <5> in the WLAN Settings menu. The current server
IP address setting displays in the scanner information window (Figure 79):
Figure 79: Server IP Setting
2. Enter the IP address for the server that is running the CIPHER Scanner Agent software into
the New field (refer to Section 3.2 - Loading and Configuring the CIPHER Scanner
Agent Software), then press the <Blue Enter> key to save the setting and return to the
WLAN Settings menu. Use the CIPHER Scanner IP Address setting in Section 3 of the
Settings Worksheet.
Appendix A: Using Wireless Scanners with Furniture Wizard
79
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5.6 Server Port Address Setting
1. To specify the TCP/IP server port address for the server that is running the CIPHER Scanner
Agent software, press <6> in the WLAN Settings menu. The currently assigned TCP/IP server
port address setting displays in the scanner information window (Figure 80).
Figure 80: Server Port Setting
2. Enter the TCP/IP server port address (of the server that is running the CIPHER Scanner
Agent software) into the New field, then press the <Blue Enter> key to save the setting
and return to the WLAN Settings menu. It must be a value between 1 and 65538 and must
within the range of ports created in the server on which the CIPHER Scanner Agent software
is being run (see Section 2.5 - Loading and Configuring CIPHER Scanner Agent
Software). Use the port setting that is next to the Assigned Scanner IP address you
recorded for the scanner in Section 3 of the Settings Worksheet.
3. When finished entering all required settings into the WLAN Settings menu, press the
<Esc>, and then press the <Power> in the lower right front corner of the scanner to power
it off.
You can now proceed to Chapter 3: Using Wireless Scanners with
Furniture Wizard to learn how to use hand-held scanners to capture and
transmit inventory and sales data to Furniture Wizard.
80
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Appendix B: Settings
Worksheet / Miscellaneous
5.1 Overview
The Appendix section contains the following sections:
ƒ Settings Worksheet - Use this worksheet to record your current local area
network, Access Point and server port settings. The purpose of the worksheet
is to make it easier to keep track of these settings for the configuration
activities you will be performing in Chapter 2 - Installation and
Configuration.
ƒ Scanner Firmware / Software Updates - CIPHER Labs and Furniture Wizard
Software continually update the scanner firmware, interface software that
allows the scanners to “talk” to Furniture Wizard. This section includes
instructions on how to upload firmware and software updates when you receive
them from CIPHER Labs or Furniture Wizard Software.
ƒ Optimizing the Furniture Wizard Database - This section contains
important information about optimizing the Furniture Wizard database when
using the CIPHER Lab wireless scanners and accompanying Cipher Scanner
Agent software.
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Settings Worksheet
Use this worksheet to record your current local area network, Access Point and
CIPHER Scanner Agent server port settings. The purpose of the worksheet is to make
it easier to keep track of these settings for the various configuration activities you will
be performing throughout Chapter 2 - Installation and Configuration.
Section 1 - Current Local Area Network Settings
Record the following settings from the Internet Protocol (TCP/IP) Properties
page on your Local Area Network (LAN). For more details on how to access
these settings, refer to Steps 3 through 6 (in Section 4.2.2):
1
2
3
4
LAN IP Address:
____
____
____
____
.
____
____
____
.
____
____
____
.
____
____
____
LAN Subnet Mask:
LAN Default Gateway:
LAN DNS Server:
.
.
.
.
.
.
.
____
.
____
.
____
Section 2 - Access Point Settings
Once you have reconfigured Access Point in Step 11 in Section 4.2.2,
record the following settings from the Internet Protocol (TCP/IP) Properties
page on your network server or hub. For more details on how to access
these settings, refer to Steps 3 through 6 in Section 4.2.2. Settings for
up to five Access Point receivers can be recorded in this section.
Access Point 1
5
6
7
8
Access Point IP Address:
Access Point Subnet Mask:
AP Name:
____
____
.
____
____
.
____
____
.
____
____
.
.
.
_________________
_________________
PIN Code:
82
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2a - Additional Access Point Settings
If you will be using more than one Access Point receiver with your local area
network, record the settings for each additional unit on this page:
Access Point 2
1
2
3
4
Access Point IP Address:
Access Point Subnet Mask:
AP Name:
____
____
.
____
____
.
____
____
.
____
____
.
.
.
_________________
_________________
PIN Code:
Access Point 3
1
2
3
4
Access Point IP Address:
____
____
.
____
____
.
____
____
.
____
____
Access Point Subnet Mask:
AP Name:
.
.
.
_________________
_________________
PIN Code:
Access Point 4
1
2
3
4
Access Point IP Address:
____
____
.
____
____
.
____
____
.
____
____
Access Point Subnet Mask:
AP Name:
.
.
.
_________________
_________________
PIN Code:
Access Point 5
1
2
3
4
Access Point IP Address:
____
____
.
____
____
.
____
____
.
____
____
Access Point Subnet Mask:
AP Name:
.
.
.
_________________
_________________
PIN Code:
Appendix B: Settings Worksheet / Miscellaneous
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - CIPHER Scanner and Agent Port Settings
To use this section of the Settings Worksheet, do the following:
ƒ Once you have verified the IP address of the server on which the CIPHER
Scanner Agent is being loaded, record the IP address setting in the CIPHER
Scanner Agent IP Address field below. For more details, refer to Step 1 in
Section 3.2 - Loading and Configuring the CIPHER Scanner Agent
Software.
ƒ After you have created server ports in the CIPHER Scanner Agent, record them in
the Port Number fields below. For more details, refer to Step 6 in Section 3.2.
ƒ When each port is assigned to a specific wireless scanner, create an
identification number for the scanner and record it next to the assigned port
number below. For more details, refer to Step 16 in Section 4.5.6 - Server
Port Address Setting.
CIPHER Scanner Agent IP Address: ____
.
____
.
____
.
____
1
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Port Number: _______
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
Assigned Scanner IP: ____.____.____.____
2
3
4
5
6
7
8
9
10
11
12
13
14
15
84
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 CIPHER Lab Kernel Update Procedures
To upload kernel updates (supplied by CIPHER Labs) to each wireless scanner,
perform each of the following tasks:
1. Step 6 in Section 4.2.1 (Preparing CPT-8061) provides instructions on how to
connect the Charging and Communications cradle to the serial port of the PC from
which the firmware update will be loaded. If you have not already performed each
of the tasks outlined in Step 6, they must be completed at this time. The PC sends the
Scan-IT interface software on to each communications cradle via this serial
connection. The cradle in turn “transmits” the software to the wireless scanner via an
Infrared laser light emitted from a red window located in the large slot at the top of the
cradle, to another red window located on the bottom of the scanner unit.
2. Place the CPT-8061 scanner facing forward into the large slot located at the top of the
Charging and Communications cradle. The metal contacts located on the bottom of the
scanner unit must make firm connection with the metal prongs located in the large
slot at the top of the cradle. Leave the nylon hand cord (attached to the lower left
corner of the scanner) hanging out the left side of the cradle. Make sure the scanner
is turned off at this point!
3. Simultaneously press the <7> and <9> keys and the <Power> key in the lower right
front corner of the scanner. Wait for the scanner to beep three times, then turn the
scanner off by pressing the <Power> key.
Figure 81: Powering the Scanner On and Off
Simultaneously Press <7> + <9> + <Power>
,
After three beeps, turn scanner off by pressing <Power> again
Appendix B: Settings Worksheet / Miscellaneous
85
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To access the scanner Kernel menu, simultaneously press the <7> and <1>
and the <Power> key in the lower right front corner of the scanner. Wait
for the scanner to beep three times and then press <3> to select the Update
Kernel option.
Figure 82: Accessing Wireless Scanner Kernel Menu
Simultaneously Press <7> + <1>, then <Power>
,
after three beeps, press <3>
5. When the Load Program menu appears, press <1> (Cradle-IR) to start the firmware
update upload process.
Figure 83: Load Program Menu
Select <1> (Cradle - IR)
86
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. When the Baud Rate menu aest baud rate. In this case, press
<1> (115200).
Figure 84: Baud Rate Selection
7. When the Please Place in Cradle *Download Ready* message appears in the
display window, place the scanner facing forward into the large slot at the top of the
Charging and Communications cradle:
Figure 85: Please Place in Cradle Message
Appendix B: Settings Worksheet / Miscellaneous
87
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Run the IRLoad.exe program from your C:\FW2000\Drivers\Cipher folder on which
the serial cable is connected from the Communications cradle. Select the K8000-
nnn.shx file (where ‘nnn’ is the firmware release number) provided by CIPHER Labs.
9. After loading the Scan-IT software CD, the following communications port and baud
rate information appears in the display window on the scanner. This allows you to
verify previous input into the scanner. Click OK to continue the firmware upload
process.
Figure 86: COM Port Properties Dialog
10.During the software upload process, a Please Wait Loading message appears in the
display window on the scanner, and a progress bar appears on the connected PC.
When the process is finished, a Downloaded Completely” Do you want to
download another program? message appears in the display window on the
scanner:
Figure 87: Downloaded Completely Message
88
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
11.Click No to complete the download process. Press any key and power the unit off by
pressing the <Power> key when the following message is displayed:
Figure 88: Complete - Power Off Message
12.After powering off the scanner, turn it back on by pressing the <Power> key.
To signify that new firmware has been uploaded to a scanner, the unit emits
three loud beeps the first time it is powered on after a software installation.
The following message is also displayed in the scanner information window:
Figure 89: New Program Message
Displays upon startup after Program Installation
13.After verifying that the kernel has properly loaded, press the <Esc> key or any other
key, then turn off the scanner by pressing the <Power> key. If indicated by
Furniture Wizard Software, load any accompanying firmware updates using the
procedures in Section 5.3.2: Furniture Wizard Firmware Update Procedures.
Appendix B: Settings Worksheet / Miscellaneous
89
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4 Furniture Wizard Firmware Update Procedures
To upload firmware updates (provided by Furniture Wizard Software) to each
wireless scanner, perform each of the following tasks:
1. Step 6 in Section 4.2.1 (Preparing CPT-8061) provides instructions on how to
connect the Charging and Communications cradle to the serial port of the PC
from which the Scan-IT interface software will be loaded. If you have not already
performed each of the tasks outlined in Step 6, they must be completed at this time.
The PC sends the interface software on to each communications cradle via this serial
connection. The cradle in turn “transmits” the software to the wireless scanner via an
Infrared laser light emitted from a red window located in the large slot at the top of the
cradle, to another red window located on the bottom of the scanner unit.
2. Place the CPT-8061 scanner facing forward into the large slot located at the top of the
Charging and Communications cradle. The metal contacts located on the bottom of the
scanner unit must make firm connection with the metal prongs located in the large
slot at the top of the cradle. Leave the nylon hand cord (attached to the lower left
corner of the scanner) hanging out the left side of the cradle.
3. To access the proper scanner menu to start the software upload process,
simultaneously press the <7> and <9> keys on the scanner, then press the
<Power> key in the lower right front corner of the scanner. When the System Menu
appears, press <6> (Load Program).
Figure 90: Accessing Wireless Scanner Main Menu
Simultaneously Press <7> + <9>, then <Power>
90
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When the Load Program menu appears, press <1> (Cradle-IR).
Figure 91: Load Program Menu
Select <1> (Cradle - IR)
5. When the Baud Rate menu appears, select the fastest baud rate. In this case, press
<1> (115200).
Figure 92: Baud Rate Selection
Appendix B: Settings Worksheet / Miscellaneous
91
Download from Www.Somanuals.com. All Manuals Search And Download.
6. When the Please Place in Cradle *Download Ready* message appears in the
display window, place the scanner facing forward into the large slot at the top of the
Charging and Communications cradle:
Figure 93: Please Place in Cradle Message
7. Load the Scan-IT software CD provided by Furniture Wizard Software into the PC.
8. After loading the firmware update CD, the following communications port and baud
rate information appears in the display window on the scanner. This allows you to
verify previous input into the scanner. Click OK to continue the software upload
process.
Figure 94: COM Port Properties Dialog
92
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
9. During the software upload process, a Please Wait Loading message appears in the
display window on the scanner, and a progress bar appears on the connected PC.
When the process is finished, a Downloaded Completely” Do you want to
download another program? message appears in the display window on the
scanner:
Figure 95: Download Complete Message
10.Click No to complete the download process. Press any key and power the unit off by
pressing the <Power> key when the following message is displayed:
Figure 96: Complete - Power Off Message
Appendix B: Settings Worksheet / Miscellaneous
93
Download from Www.Somanuals.com. All Manuals Search And Download.
11.To signify that new software has been uploaded to a scanner, the unit emits three
loud beeps the first time it is powered on after a software installation. The following
message is also displayed in the scanner information window:
Figure 97: New Program Message
Displays upon startup after Program Installation
12. To continue using the scanner, press any key to continue. The logon appears in the
information window. During the initial software loading process, press the <ESC> key
to access the Main Menu. Upon powering up the scanner, this display will also contain
User Name and Password fields that you will use to logon to Furniture Wizard scanning
functions.
Figure 98: Welcome to Scan-IT Message
5.5 Optimizing the Furniture Wizard Database
Optimizing the Furniture Wizard database task that must be performed on a daily
basis. However, you must exit the Cipher Scanner Agent software before you run the
Optimize All or Optimize Data functions in Furniture Wizard!!
94
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Download from Www.Somanuals.com. All Manuals Search And Download.
|