Wintec Industries GPS Receiver ATR0625 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download  
Part 1 Product introduction  
Overview  
Power button:  
Function button:  
Ø Press and hold  
1. Power on/off.  
Ø Temporarily press  
Ø Press and hold  
1. Normal mode To enter  
the setting mode.  
1. Normal mode To cycle  
through the various  
information of Easy  
Showily.  
2. Setting mode To  
confirm the option of  
setting items and then  
back to normal mode.  
Ø Temporarily press  
1. Normal mode To  
reset the accumulation  
of Kilometer and  
Counter.  
2. Setting mode To set  
and switch among each  
setting items.  
Track button:  
LCD:  
Ø Press and hold  
1. Normal mode Display  
information.  
1. Normal mode To set up a  
new track.  
2. Setting mode Display  
setting items.  
Ø Temporarily press  
1. Normal mode To mark a  
point in the current track.  
2. Setting mode To switch  
options of selected items.  
GPS Antenna Location  
2
Download from Www.Somanuals.com. All Manuals Search And Download  
Part 2 Features  
Easy Showily is a Auto-show Track Logger with internal antenna.  
u-blox ATR0625 used in its core is high-tech component and  
included function of auto-log record of journey. USB interface  
ensures easy linking with computer to read the log data or  
programming it any where without install any driver or software.  
The GPS acquisition status, the last record of time and position  
could all be stored in non-volatile memory. The Easy Showily not  
only has 16 GPS channels but also powered by 2*AAA alkaline  
battery, no need to charge. Furthermore, it is with very low  
power-consumption, you could use it by full power operation  
(record 1 point per second) for 15 hours continually. If shake  
mode is available, then the battery life will be longer.  
Easy Showily built-in u-blox GPS IC ATR0625.  
Maximum 16 channels can be acquisitioned quickly.  
Highest tracking sensitivity: -158 dBm  
Internal decode”SBAS” is used excluding the need for  
external hardware in receiving SBAS signal.  
Data-logging acts like the in-flight black box and can record of  
position, date and time as long as power source is maintained.  
For down-load of log-data and programming of Easy Showily,  
provided software tool “Win_Tool” can simplify usage.  
USB interface, not need to install any driver or software.  
System requirement: Windows XP® or Vista®.  
Suggested Web Browser: Internet Explorer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download  
Part 3 Safety notes  
GPS (Global Positioning System) is provided by the United  
States government. Its accuracy may varies depending on  
special conditions (area at war or if it is blocked). Any control  
by USA will affect this system and its accuracy.  
If installed on the transportation device, driver must not  
operate this while driving.  
GPS performance is affected when satellite coverage is  
degraded as near a high-rise building, in the tunnel or under a  
cover.  
Personal replacement of components and re-structuring of  
this is prohibited and may result in loss of legal usage.  
Operation of this device is strictly prohibited in highly  
explosive environment such mining, in-flight or other  
unauthorized area against use of this.  
Avoid exposing this at places of high temperature and  
humidity.  
Return to original dealer immediately if it emits strange smell  
or fume.  
4
Download from Www.Somanuals.com. All Manuals Search And Download  
Part 4 User’s guide  
Package:  
Easy Showily (Auto-show Track Logger)  
AAA alkaline battery *2  
USB extensive cable (15cm) *1  
User’s manual.  
Easy Showily Operation:  
Press and hold “Power” button to power on it. The LCD  
will show up the main screen to confirm it is in the normal  
mode and GPS start acquisitioning.  
After power on, press and hold “Power” button to turn the  
power off.  
“FIX” show up in the upper right of main screen indicates  
GPS acquisition is done. If not, the GPS acquisition fails.  
In the normal mode, temporarily press “Track” button  
(“PUSH” will show up in the upper right of main screen) to  
mark a point in the current track.  
In the normal mode, press and hold “Track” button (“NEW”  
will show up in the upper right of main screen) to re-start a  
new track.  
If the battery icon shows up in the button right of main  
screen, the power is low and needs to replace batteries for  
5
Download from Www.Somanuals.com. All Manuals Search And Download  
avoiding worse GPS performance or un-working.  
In the normal mode, temporarily press “Power” button to  
change the information showed on LCD.  
A Heading and speed information (after positioning)  
Press “Function” button to change the information from  
speed to altitude.  
B Kilometer accumulated at present  
C Counter accumulated at present  
Press “Function” button to switch the following  
accumulative value of counter.  
3
Total amount of counter.  
Amount  
of  
motion  
counter.  
Amount of non-motion counter.  
6
Download from Www.Somanuals.com. All Manuals Search And Download  
D Average speed at present  
E latitude and longitude at present (after positioning) or  
last positioning (before positioning)  
n the first time use or  
d start)  
F Local time at present: (Based on the zone set by user)  
(When the first time use or  
cold start)  
In the normal mode, press and hold “Function” button will  
enter the setting mode and then the LCD will show up  
setting information.  
In the setting mode, temporarily press “Power” button or no  
operation more than 15 second, it will back to normal mode.  
In the setting mode, temporarily press “Function” button to  
switch the following 3 setting categories. And the  
information showed on the second line is present and  
selected status.  
7
Download from Www.Somanuals.com. All Manuals Search And Download  
In the setting mode, temporarily press “Track” button to  
switch setting value showed on the second line of the  
screen. The setting value would be confirmed when you  
skip to the other setting category or back to normal mode.  
1. LOG Mode Setting:  
Walk mode, Bicycle mode, Car mode, User define mode.  
2.Shake mode (power saving) function  
3. Show the usage capacity of the record:  
If you want to reset the accumulative value of Kilometer and  
counter, please enter the information B (kilometer  
accumulated) under normal mode, and press “Function”  
button, then the “RESET?” will be showed up. At this  
moment, you just press “Function” button again, the  
kilometer accumulated and counter accumulated will reset  
simultaneously, otherwise, you just press “Power” button to  
switch to other information mode, or ignore it for 5 seconds,  
and then the “RESET” will be canceled.  
When shake mode is enable and stationary more than 5  
8
Download from Www.Somanuals.com. All Manuals Search And Download  
minutes, its power will be turned off (that interval can be set  
by yourself), until the device with movement again. The  
Easy Showily will not auto power on/off while shake mode  
is disable. And if you turn it off manually while shake  
mode is enable, then the shake mode will be disabled  
simultaneously.  
When the USB is used as interface:  
Turn the Easy Showily power off.  
Connect Easy Showily to USB port of computer.  
The built-in access tool (Win_Tool) will execute  
automatically, and then read the log data and transfer its  
format to Google Maps automatically.  
User can transfer the log data to other format to suit other  
software or programming Easy Showily via Win_Tool.  
Battery Replacement:  
Turn off the Easy Showily.  
Take off the USB cover.  
Take out the battery cover.  
Replace new batteries. (AAA 1.5v battery *2; Alkaline  
batteries are recommended.)  
Be sure not to drop the battery.  
Put the battery cover back.  
Put on the USB cover.  
Cautions: Remove the batteries when you do not use the Easy  
Showily for a long time. Otherwise, it may result in leakage of  
the batteries.  
9
Download from Www.Somanuals.com. All Manuals Search And Download  
Part 5 Operation notes  
Easy Showily will do self-check once it is powered. GPS start  
to work when LCD shows up the main screen. GPS  
automatically starts acquisition and auto-logs. If sky is clear  
overhead, it requires only 34 sec for acquisition. (If the data in  
its memory is still valid, it needs only 4~33 sec). After  
acquisition, Easy Showily starts record the track.  
For the first time if it is placed at the area well exposed to the  
satellite signal, this device requires approx 13 min  
(theoretically 12.5 min) to receive or update Almanac. Refer to  
trouble shooting guide when signal is not received well.  
If Easy Showily formatting the internal data is not correct, or if  
satellite data has been deleted, it takes longer time to position.  
But under the following conditions, it can take even longer  
time to get cold start.  
If it is not in use for over 3 months (the almanac is old-  
dated).  
If the last recorded position data is over 500 km.  
After positioning, Easy Showily begins to auto-log the  
following way.  
Maximum data up to 94000 Points.  
Recording in a circular way.  
Auto-logging goes on without the need of any device.  
Log-data can be read out by way of the ”Win_Tool”  
included.  
Data includes latitude, longitude, and altitude, time in year-  
month-date-hour-min-sec (UTC) and special point mark  
status.  
After successful positioning, it wills auto-log GPS data into  
its internal memory chip. It recorded in a rotational order.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download  
The earliest (oldest) data will replaced by the latest (newest)  
one when memory space is full (when data excesses  
94000 maximum).  
The exact operating time would be a little difference by the  
situation, environment condition and the type of battery.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download  
Part 6 Access Tool  
1. Connect Easy Showily with computer via USB interface. The  
access tool will execute automatically. If not please find the device  
in the “My Computer”, and then click on its icon to execute it.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download  
2. Key in the password and click “Log in”. If you don’t enable  
password protect, this step will be omitted.  
3. Win_Tool will read log data and transfer it to Google Maps format  
automatically, and execute it. User also can transfer the log data  
to another format, such as Google Earth or TimeMachineX  
formats.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download  
At the same time, Win_Tool will become minimum and hide in the  
system tray. Click the icon, Win_Tool will appear.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download  
4. More Setting or function.  
4.1 Clear all LOG Data:  
Click “Clear LOG” to delete all LOG data in the device.  
Note:  
If select delete all LOG data, it will spend 30 sec to delete all  
LOG data while next time the device is power on. Also the LCD  
on the device will show the message as below, until delete  
process completely.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2 Detail Setting:  
Click “Detail>>” to open detail setting dialog.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download  
Click “<<Fundamental” back to fundamental setting dialog.  
4.2.1 Enable password protection or change password:  
User could enable password protection here, and the  
maximum of password is 10 characters or digits.  
If you want to disable password protection, just keep blank in  
both “New” and “Confirm”, and then click “Change Password”.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.2 GPS setting:  
.G PS Cold Start: Click “Cold Start” in Win_Tool or just press and  
hold the function and track buttons simultaneously, and then  
power on the device, it will be re-started by cold start mode.  
.G PS parameters setting:  
.1 Fi x Mode: Select the GPS positioning mode.  
.2 2D Fi x Altitude: Set the “fixed altitude” used when the  
fix mode is 2D.  
.3 Ini tial Min. SVs: Set how many GPS satellites used for the  
initial positioning.  
.4 Ini tial Signal Min Strength: Set the GPS satellite’s strength  
used for the initial positioning.  
.5 Na vigation Signal Min Strength: Set the GPS satellite’s  
strength used after positioning.  
.6 P DOP Mask: When the value is bigger, the inaccuracy is  
greater, still you can position the GPS in the worse  
environment. The smaller value brings the better accuracy,  
but you may not be able to fix position in the worse  
environment.  
.7 TDOP Mask: When the value is bigger, the inaccuracy is  
greater, still you can position the GPS in the worse  
environment. The smaller value brings the better accuracy,  
but you may not be able to fix position in the worse  
environment.  
.8 P Accuracy Mask: Set the threshold of position accuracy.  
.9 T Accuracy Mask: Set the threshold of time accuracy.  
.10 S BAS: Enable/Disable SBAS function.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.3 Language selection of operation interface:  
Support English, Chinese Traditional, Chinese Simplified.  
4.2.4 Shake mode (power saving) setting:  
To enable the Shake mode, the device will be power off when  
there is no movement after 5 minutes (default); and the device  
will be power on automatically when it moves.  
To disable Shake mode, device will be never power off  
automatically. And if you turn it off manually while shake mode  
is enable, then the shake mode will be disabled simultaneously.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.5 LOG Mode Setting:  
LOG mode supports “Walk mode”, “Bicycle mode”, “Car mode”  
and “User define mode”.  
In user define mode, there is 5 preset saving intervals can be  
selected by slide switch, including Time, Range, Heading,  
Speed and Mix (Time & Range)  
Note:  
1.  
Valid Speed for Record” means that if speed exceeds this  
range will not record any points.  
2.  
“Factory Setting” means that recover all parameters to  
factory setting at user define log mode.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.6 Transfer LOG data to another export format:  
Easy Showily support multi translate formats, such as  
Google Maps, Google Earth, Virtual Earth, OziExplorer,  
PaPaGO, GPX format, and TimeMachineX format.  
Note:  
1.  
User could download TimeMachineX free software from the  
website http://www.wintec.com.tw to integrate photo to your  
trajectory.  
2.  
In the export file list box, click the right key of mouse, it  
could copy or delete the export file.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.7 Total LOG points  
Total LOG points indicate how many points are stored in the  
device.  
4.2.8 Change device ID:  
The device ID could be changed by User.  
4.2.9 LCD Contrast:  
Set the LCD Contrast; LCD Contrast depends on the  
temperature. The higher temperature is, the darker for contrast, in  
another word, the lower temperature is, the lighter for contrast.  
Reference Value: 200 at 25 (77 )  
22  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.10 Zone:  
The Zone value could be set to fit in with your trajectory.  
The default value is the same as the PC you used. You could  
click ”Get device Zone” to catch the zone value from the device  
(same as device), also you could adjust the Zone value by  
yourself and click ”Set device Zone” to save the modification.  
Note: The zone setting will affect the presentation of local  
present time on the LCD of device.  
4.2.11 System Unit:  
Set the system unit at the device; one for Metric unit, the other  
for Imperial unit.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download  
4.2.12 Google Maps with Panoramio:  
. View all nearby public photos on the Panoramio of the selected  
track points.  
.1 Keep the “Panoramio User ID” as blank.  
.2 Click “Google Maps” button to convert LOG data to Google  
Maps format.  
.3 Select a trajectory with Google Maps format and double click it  
to open.  
.4 Just click any track point icon on the Google Maps.  
.5 All nearby photos on the Panoramio of the selected track point  
will show up.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download  
25  
Download from Www.Somanuals.com. All Manuals Search And Download  
. View all nearby photos held by yourself on the Panoramio of the  
selected track points.  
.1 Click “Upload photo to Panoramio” button, it will link to  
Panoramio Website, upload your photos and geotag those  
photo by the geographic data of your trajectory.  
PS. Before you upload the photos, please register and login  
Panoramio at first.  
.2 Back to Win_Tool and key in your Panoramio user number  
(you can find that in the url of your Panoramio personal page.  
Ex:  
nk of “Panoramio User  
number”.  
.3 Click “Google Maps” button to convert LOG data into Google  
Maps format with your Panoramio user number.  
.4 Select a trajectory with Google Maps format and double click it  
to open.  
.5 Just click any track point icon on the Google Maps  
.6 All nearby your own photos on the Panoramio of the  
selected track point will show up.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download  
. Share your Google Maps format trajectory with your friend.  
.1 Copy and e-mail it to your friend via your mail client such as  
outlook.  
.2 Or click the button of “Mail to friend” send it out.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download  
Part 7 Trouble shooting  
If the vehicle enters the tunnel. The GPS signal transmits  
linearly down to earth and its signal is blocked out in this  
situation.  
GPS satellite coverage gets poor because of high-rise building  
or thick forest. Even though Easy Showily can receive  
reflected weak GPS signal, the data might be less accurate.  
The sun shade in the vehicle can partially block out GPS  
signal and effect good reception. The GPS satellite is under  
control of USA and the accuracy might vary depending on  
some special purpose (especially when manipulated by USA).  
After successful positioning of Easy Showily, if it is moved to  
another area of 500 km away it cannot be easily re-positioned.  
This is because the firstly recorded data (position, time and  
number of satellites acquisitioned) is different from the new  
area. It will need longer time for re-positioning.  
Please replaces new batteries when the icon of low battery is  
showed up, otherwise the WPL-1000 will stop recording the  
track or record with unqualified performance.  
Avoid placing 2 GPS devices too close during positioning.  
If the Easy Showily works abnormally because of wrong  
procedure, then please reset it by taking off the battery. It will  
have factory default without effecting pre-set program. At the  
factory default, GPS reception begins in a warm start mode  
and fix position may take longer time.  
When the Auto-Run function is not working, please refer to  
MSDN-Enabling And Disabling AutoRun:  
28  
Download from Www.Somanuals.com. All Manuals Search And Download  

Weed Eater Trimmer 545137264 User Manual
Well Traveled Living Fire Pit 02115 User Manual
West Bend Back to Basics Blender SR1000 User Manual
Whirlpool Oven 6AKP524 IX User Manual
Whirlpool Washer 8182674 User Manual
White Rodgers Thermostat TYPE 151 User Manual
Xantrex Technology Power Supply M370078 01 II User Manual
Yamaha Guitar AES FG User Manual
Yamaha Music Mixer EN55103 1 User Manual
Zanussi Washer Dryer FLS 522 C User Manual