Winegard Satellite TV System RA 7296 User Manual

charges for warranty service. The Winegard dealer must contact Winegard Tech-  
nical Services in advance for pre-approval of the service.Approval of the service is  
at the sole discretion of Winegard Company.  
STEP 5. Install connectors on downlead and  
set 2 cable as shown in Figure 5. Attach  
downlead cable to jack on wallplate/amplifier  
marked antenna as shown in Figure 4. Attach  
cable going to set 2 outlet to jack on power  
supply marked SET 2. Attach cable coming  
fromcableinputtojackonpowersupplymarked  
CABLE.  
INSTRUCTIONS  
NOTE:Makesuretheantennaisintheoperating  
position (up) and pointed at the station desired.  
Alternatively, Customer may ship the product prepaid to Winegard Technical Ser-  
vices (located at 3111 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-  
788-4417). Customer must return the product along with a brief description of the  
problem and provide Winegard Technical Services with Customer’s name, ad-  
dress, and phone number. Customer must also provide proof of purchase to verify  
the product is under warranty. If the product is returned before the expiration of the  
warranty period, Winegard Company will (at its option) either repair or replace the  
product.  
This Limited Warranty does not apply if the product has been damaged, deterio-  
rates, malfunctions or fails from: improper installation, misuse, abuse, neglect, ac-  
cident, tampering, modificationoftheproductasoriginallymanufacturedbyWinegard  
in any manner whatsoever, removing or defacing any serial number, usage not in  
accordance with product instructions or acts of nature such as damage caused by  
wind, lightning, ice or corrosive environments such as salt spray and acid rain.This  
Limited Warranty also does not apply if the product becomes unable to perform its’  
intended function in any way as a result of the television signal provider making any  
changes in technology or service.  
INSTALLING FC-5910  
CONNECTORS ON COAX CABLE  
1/2" *  
1.  
Inner Insulation  
¼" *  
Outer Cover  
2.  
Center Conductor  
3.  
FIGURE 5  
MODEL RA-7296  
Made in U.S.A.  
Crimp Here  
Step 1: Strip outer cover back 1/2"* from end of cable. Fray  
braid back as far as outer cover will allow.  
Set 2  
Step 2: Trim braid close to outer cover and remove 1/4"* of  
inner insulation being careful not to nick center conductor.  
Make sure no foil or braid can touch center conductor.  
RV WALL PLATE/  
AMPLIFIER  
RETURN AUTHORIZATION POLICY  
AReturn MaterialAuthorization (RMA) is required prior to returning any product to  
Winegard Company or Winegard Warranty Services under this warranty policy.  
Please call our Technical Services Department at 800-788-4417 or send an e-mail  
to [email protected] to obtain the RMAnumber. Please furnish the date of  
purchase when requesting an RMA number. Enclose the product in a prepaid  
package and write the RMA number in large, clear letters on the outside of the  
package. To avoid confusion or misunderstanding, a shipment(s) without an RMA  
number(s) or an unauthorized return(s) will be refused and returned to Customer  
freight collect.  
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY  
OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BYANYOTHER PER-  
SON.  
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTO-  
RY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE  
AND MERCHANTABILITYARE LIMITEDTOTHETWOYEAR PERIOD OFTHIS  
WARRANTY.  
Step 3: Slide connector tip between braid and inner insulation  
(braidandfoil, onfoilshieldcable)andpushconnectoroncable  
as far as it will go. Crimp built-in ferrule with proper crimping  
tool. Hex connector requires hex crimping tool. Do Not  
crush cable out-of-round.  
Antenna  
DESCRIPTION  
FIGURE 4  
Cable  
Wall plate/amplifier amplifies VHF/UHF TV  
signals received by non-amplified Winegard  
RV antennas with outdoor receptacle for TV set  
and cable input. Wall plate/amplifier provides  
a+12Voltreceptacleaswellasantennasignals  
to two TV sets. Cable input from outdoor  
receptacle connects to wall plate and may be  
switched so either antenna or cable signals  
may be watched. See applications. Available  
in white only.  
* If installing in very hot weather, increase dimensions 1/8"  
STEP 6. Mount wall plate/amplifier in wall  
with screws provided and attach TV set cable to  
jack on front. Connect TV set cable to input jack  
on TV. Press switch on front of outlet and check  
that light is on.  
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY  
(2 YEARS PARTS; 1 YEAR LABOR)  
Winegard Company warrants this product against defects in materials or  
workmanship for a period of two (2) years from the date of original purchase. During  
year one (1) of such warranty, Winegard Company will also pay authorized labor  
costs to an authorized Winegard dealer to repair or replace defective products. No  
warranty claim will be honored unless at the time the claim is made, Customer  
presents proof of purchase to an authorized Winegard dealer (to locate the nearest  
authorized Winegard dealer, contact Winegard Company, 3000 Kirkwood Street,  
Burlington, Iowa 52601, Telephone 800-288-8094 or visit www.winegard.com).  
CustomermustprovideproofofpurchasewithadatedsalesreceiptfortheWinegard  
product to verify the product is under warranty. If the date of purchase cannot be  
verified, the warranty period shall be considered to begin thirty (30) days after the  
date of manufacture.  
If a defect in material or workmanship is discovered, Customer may take the  
product to an authorized Winegard dealer for service. Customer must provide  
proof of purchase to verify the product is under warranty. If the product is brought to  
an authorized Winegard dealer for service prior to expiration of year one (1) of the  
warranty period and a defect in material or workmanship is verified by Winegard  
Technical Services, Winegard Company will cover the Winegard dealer’s labor  
In states that do not allow limitations on implied warranties, or the exclusion of  
limitation of incidental or consequential damages, the above limitations or exclu-  
sions do not apply.  
Some states do not allow limitations on how long an implied warranty lasts, or the  
exclusion of limitation of incidental or consequential damages, so the above limita-  
tions or exclusions may not apply to you.  
OPERATION: To receive cable signals  
from outdoor receptacle: Press switch to  
OFF position. Light on wallplate will go (OFF)  
showing that power is no longer connected to  
theamplifierandthatbothTVsetsarereceiving  
signals from outdoor receptacle.  
This warranty gives Customer specific legal rights. Customer may also have oth-  
er rights that may vary from state to state.  
NOTE: THIS UNIT IS AN AMPLIFIER. USE ONLY  
WITH NON-AMPLIFIED RV ANTENNAS.  
SATELLITE RECEIVER WARRANTY  
See manufacturer’s limited warranty policy.  
WS-MOBWARREV2Rev.1/10  
To receive signals from antenna: Press  
switch to ON position. Light on wallplate will  
come (ON) showing that power is connected to  
the amplifier and both TV sets are receiving  
signals from the antenna.  
WINEGARDCOMPANY  
3000 KIRKWOOD ST., BURLINGTON, IA 52601-2000  
Printed in U.S.A. 2451489 Rev. 1/10  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weider Home Gym WESY96310 User Manual
Wells Popcorn Poppers WPP 6, WPP 10 User Manual
Weslo Treadmill WATL139060 User Manual
West Bend Toaster Studio Toaster User Manual
Whirlpool Dishwasher W10167839A User Manual
Whirlpool Microwave Oven BGC430W BGP430W User Manual
Whirlpool Washer Dryer W10343071A User Manual
Windmere Blender BD20P User Manual
Zanussi Plumbing Product 153980 User Manual
Zanussi Refrigerator ZRB 3225 X User Manual