Winegard Power Supply AP 8700 User Manual

Wiring Diagram for FREEVISION® Antenna to Television  
FREEVISION® Antenna  
(Side View—mount not included with all models)  
Back of TV  
Note: the matching transformer  
must be connected as described  
on page 4 of the manual.  
Antenna/Cable In  
Coax Connection Port  
Coax Cable  
Winegard model AP-8700 preamplifier and model PS-1403 power inserter are shown above.  
Winegard Company 3000 Kirkwood St. Burlington, IA 52601-2000 800-288-8094 fax 800-247-8221 www.winegard.com Printed in U.S.A. ©2011 Winegard Company WC-1051  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wiring Diagram for FREEVISION® Antenna with Existing Indoor Coax Connection  
Coax Connection on TV  
FREEVISION®  
Antenna  
Antenna/Cable In  
Coax Connection Port  
Cable  
Existing Coax  
Connection*  
a
Co  
*The existing coax connection may be a 2-, 3-, 4- or 6- port splitter. A 2-port splitter is shown here.  
Depending on the amount of signal received, a distribution amplifier may be required to power the system. Winegard recommends model HDA-100 distribution amplifier.  
Winegard Company 3000 Kirkwood St. Burlington, IA 52601-2000 800-288-8094 fax 800-247-8221 www.winegard.com Printed in U.S.A. ©2011 Winegard Company WC-1051  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wiring Diagram for FREEVISION® Antenna with Grounding Block and Existing Coax Connection  
Coax Connection on TV  
FREEVISION®  
Antenna/Cable In  
Coax Connection Port  
Antenna  
Point toward  
stations.  
Note: ground wire  
(#8 or larger)  
must run from  
grounding block  
to ground rod  
e
Grounding  
Block  
Coax  
(not shown here).  
*The existing coax connection may be a 2-, 3-, 4- or 6- port splitter. A 2-port splitter is shown here.  
Depending on the amount of signal received, a distribution amplifier or preamplifier may be required to power the system. Winegard recommends model HDA-100 distribution amplifier or AP-8700 preamplifier.  
Refer to the National Electronic Code for antenna grounding specifications.  
Winegard Company 3000 Kirkwood St. Burlington, IA 52601-2000 800-288-8094 fax 800-247-8221 www.winegard.com Printed in U.S.A. ©2011 Winegard Company WC-1051  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wiring Diagram for FREEVISION® Antenna with Preamplifier, Grounding Block & Existing Coax Connection  
Preamplifier Connections  
Coax Connection on TV  
Underside of Preamplifier  
FREEVISION®  
Antenna  
Antenna Input  
Antenna/Cable In  
Coax Port  
Power Supply Input  
Point toward  
stations.  
Preamplifier  
Note: ground wire  
(#8 or larger)  
must run from  
grounding block  
to ground rod  
e
Grounding  
Power  
Inserter  
Block  
Coax  
(not shown here).  
Existing Coax  
Connection*  
*The existing coax connection must be a splitter that is AC/DC passive on one leg only. The power supply must be connected to the AC/DC passive leg of the existing coax connection.  
Refer to the National Electronic Code for antenna grounding specifications.  
Winegard Company 3000 Kirkwood St. Burlington, IA 52601-2000 800-288-8094 fax 800-247-8221 www.winegard.com Printed in U.S.A. ©2011 Winegard Company WC-1051  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Well Traveled Living Patio Heater 60405 User Manual
West Bend Can Opener 77201 User Manual
Western Digital Computer Drive WD10EADS User Manual
Whistler Radar Detector 1605 User Manual
Winegard Satellite TV System WI DM04 User Manual
Wolf Appliance Company Cooktop SRT484CG User Manual
Wyse Technology Personal Computer 883886 01 User Manual
Yamaha DJ Equipment EMX5014C User Manual
Yamaha Guitar 11391 User Manual
Zebra Technologies Printer DA402 User Manual