BI-DIRECTIONAL
HEAT PUMP DRIERS
96-TBF
SERIES
96-TBF BI-DIRECTIONAL HEAT PUMP DRIERS
Bi-Directional Driers Designed to Provide Complete Protection to Your Heat Pump
or Reverse Cycle System. This Compact Design Filters Contaminants, Removes
Moisture & Acids During the Cooling & Heating Cycles During Winter and Summer.
Internal Check Valves Prevent the Release of Collected Contaminants When the Heat
Pump Cycles from the Heating to Cooling Modes
FEATURES
• Proven, nylon internal check valves.
• Solid block desiccant core: a composite of molecular sieve and activated alumina.
• Provides high moisture, organic and inorganic acid removal.
• The addition of charcoal to the desiccant core allows for the removal of wax that
may occur at low evaporator temperatures.
96-TBF
• Nickel plated SAE flare and solid copper ODF fittings.
• Corrosion resistant paint.
SPECIFICATIONS
Maximum Working Pressure . . . . . . . . . . 500 psig
Minimum Burst Pressure . . . . . . . . . . . . . 2500 psig
Agency . . . . . . . . . . . . . . . . . . . . . . . . . . . U.L. file number SA7175
C.S.A. file number LR100624
INSTALLATION NOTE: The drier may be installed in any position in the reversing liquid line.
SELECTION NOTE: Given the proper liquid line size, connection type and tonnage of the
refrigerant system, the correct drier may be selected using the chart below. Choosing a unit size
with sufficient water capacity to reduce moisture content of the system to a safe level should be
considered.
SELECTION: CONNECTIONS, DIMENSIONS, FLOW CAPACITIES
➀ Flow Capacity
Model
Number
Connections
size & type
3/8 SAE
3/8 ODF
3/8 SAE
3/8 ODF
ꢀ/2 SAE
ꢀ/2 ODF
5/8 ODF
Dimension
Tons @ 2 psi ▲P
A
B
R-22
6.6
7.4
6.7
96-TBF083
96-TBF083S
96-TBF163
96-TBF163S
96-TBF164
96-TBF164S
96-TBF165S
6.28 2.63
5.63 2.63
6.97 2.63
6.3ꢀ 2.63
7.22 2.63
6.34 2.63
6.63 3.09
7.5
ꢀꢀ.2
ꢀꢀ.7
ꢀ2.4
96-TBF Series
Dimensional Drawing
➀ All ratings in accordance with ARI standard 7ꢀ0-86: 2.9 lbs./min./ton for R-22
ꢀ25
Download from Www.Somanuals.com. All Manuals Search And Download.
|