OWNER’S MANUAL
INTRODUCTION
Dear Whistler Owner,
Note: Your warranty period begins at
the time of purchase. The warranty
is validated only by the dated store
receipt! Please record the serial
number of the unit in the space
provided in the warranty section of the
manual.
If you have questions concerning the
operation of this Whistler product
please call:
XTR-145/265/335
™
™
T
T
o
o
t
t
a
a
l
l
B
B
a
a
n
n
d
d
Protection
Protection
CuSTOmer SeRVICE
LASER-RADAR
DETECTOR
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
To fully acquaint yourself with the
operation of your Whistler detector
and to better understand the
www.whistlergroup.com
differences between detecting radar,
laser and safety radar signals, we
recommend reading this entire
Please keep the receipt in a safe place.
You may register your product online
at www.whistlergroup.com. For warranty
verification purposes, a copy of your dated
store receipt must accompany any unit sent
in for warranty work. If the unit is
The Whistler Group Corporate Headquarters
3604 NW Frontage Rd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
manual or visiting our FAQ page on
our website www.whistlergroup.com
Whistler Customer Return Center
551 N. 13th St. • Rogers, AR 72756
Enjoy your Whistler detector and
please drive safely.
Sincerely,
Customer Service Tel 800.531.0004
www.whistlergroup.com
returned without a dated store receipt, an
out of warranty service charge applies.
P/N 2060018,
©
2009 The Whistler Group, Inc.
The Whistler Group, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE DESCRIPTIONS
FEATURE DESCRIPTIONS
INSTALLATION
Whistler’s ergonomic and user-friendly design
provides a new level of operating convenience. Special
features include:
12a. Numeric Icon Display (XTR-265/335)
combines icon display with a 7 segment digital
display that shows signal strength indication
and band identification.
Mounting Guidelines
•
Mount the unit as low as possible near the center of
the windshield.
Note: Not all units have all features listed.
12b. Dual Alert LED Periscope - provides
additional visual alerts.
•
Do not mount the unit behind wipers, ornaments,
mirrored sunscreens, etc. These obstructions have
metal surfaces which can affect radar and laser
signals and reduce critical warning time.
(Regular tinted glass does not affect reception.)
Some windshields have an Instaclear™ or Electriclear™
type coating, which affects radar signals. Consult
your dealer or the owner’s manual to determine if
your windshield has this coating.
1. Bracket Release Button – provides quick
and easy release of the mounting bracket.
2. Speaker – provides distinct audio warnings
for X, K, Ka band radar, safety radar, laser
and VG-2.
3. Mounting Bracket Location – slot holds
mounting bracket firmly.
4. Radar Antenna – compact, high-efficiency
antenna receives radar signals.
5. Front Laser – high gain optical lens
provides increased sensitivity and field of
view for leading-edge laser detection.
6. Rear Laser – an integrated optical
waveguide provides superior detection of
laser signals transmitted from behind.
7. City Button - reduces the annoyance of
false alerts typically encountered in urban
driving areas.
13. VG-2/Laser Icon – indicates the unit is
receiving VG-2 or laser signals.
14. X-band Icon - indicates the unit is receiving
a X-band signal.
•
15. K-band Icon - indicates the unit is receiving
a K-band signal.
16. Ka-band Icon - indicates the unit is receiving
a Ka-band signal.
•
•
Avoid placing unit in direct contact with the wind
shield.
To reduce the possibility of theft, conceal the unit
when not in use.
17. H - indicates unit is in Highway mode.
18. C - City Icon - indicates that the unit is
operating in city mode.
19. Signal Strength Icon - indicates the strength
of the signal being detected.
Windshield Mounting
•
Install the two suction cups and rubber bumper onto
the bracket by fitting them into their holes.
Press the suction cups onto the windshield at the
location you have chosen.
20. K/Ka-band Icon - shows the unit is receiving
a K or Ka band signal. K/Ka indicator will
flash for Ka band.
•
8. Quiet Button - pressing QUIET before a
radar signal is detected engages Auto
Quiet Mode which provides “clicking”
sounds after the initial warning. Pressing
QUIET during a radar encounter silences
audio alerts, while allowing visual alerts to
keep you informed.
21. V - indicates that the unit is receiving a
VG-2 signal. Indicates that VG-2 is
engaged.
22. L - indicates that the unit is receiving a laser
signal.
• Total Band Protection™ - Complete Band
Coverage that detects laser, radar, VG-2 and safety
radar bands.
IMPORTANT: Some newer cars have a plastic
safety coating on the inside of the windshield. The
windshield bracket may leave permanent marks on
this type of surface. To find out if your vehicle has this
type of windshield, check the owner’s manual or ask
your dealer. We recommend that you do not leave
the suction cup bracket on the windshield in direct
sunlight. If the detector is removed, this may cause
blistering of the dash in some vehicles.
9. Power / Volume Control – turns unit on/off
and adjusts audio level.
10. Dim Dark - engages Dim/Dark modes
11. Menu Button - (XTR-145) turns VG2 on/off.
(XTR-265/335) enters option select mode.
12. Icon Display - offers easy-to-read display to
indicate power, city mode, radar band
identification, and signal strength.
7
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
OPERATION
OPERATION
City/City I/City II Mode
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door openers,
intrusion alarms and other devices which share
frequencies with police radar. Generally, X band is
used for these devices.
Feature Engaged Confirmation
Power Connection
Each time a button is pressed, one beep confirms the
feature is “on”, two beeps confirm feature “off”.
•
Plug the small end of the power cord into the
unit’s power jack.
Plug the large end into the vehicle’s cigarette
lighter.
•
Self Test Mute
Simply press the Quiet button during the self-test
sequence to cancel the self-test audio. This will not
affect radar/laser alerts. To restore the self-test audio,
Fuse Replacement
The lighter socket plug is equipped with a replaceable
2 amp 3AG fuse located behind the silver tip. To
replace the fuse, carefully unscrew the tip of the plug.
• Press City button to cancel Highway mode and
engage City Mode. The display will switch from
simply press the Quiet button during the next self-test
.
H
C
“H” to “ ”.
Setting Saver (XTR-265/335)
Setting Saver saves your personalized settings so that
when the detector is turned off and then on again, you
do not have to re-enter them.
I
• Press City button again to enter City Mode.
• Press City button again to enter City II Mode.
Note: After 3 seconds, “I” or “II” City Mode
indicator turns off on the XTR-145.
• Pressing City button a fourth time cancels City
II Mode and returns the unit to Highway
Mode.
Auto Quiet Mode
IMPORTANT: Unscrew slowly. The tip
Pressing QUIET before a radar signal is detected provides
an alternate alert pattern, consisting of four beeps
(indicating X, K, Ka or Safety Radar) followed by clicking.
The clicking will continue for as long as the detected signal
is present or any new signal is detected within 20 seconds,
becoming more rapid as the strength of the signal
increases.
contains a spring which may fly out when
disassembling. Insert the new fuse with the spring and
screw on the tip. With use, the screw cap on the
plug may loosen. Retighten it occasionally.
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
OPERATION
I
II
additional beeps are provided. City I and City
Power On Self Test & Volume
Each time your Whistler detector is turned on, an
automatic self-test sequence confirms that the
speaker and visual displays are functional. To
increase the volume, continue turning the
volume knob.
• Press Quiet (before a signal is detected) to
engage Auto Quiet.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
Modes operate the same as Highway Mode, but
in City I Mode, only the X band sensitivity is
lowered. In City II Mode, X-band is not detected.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser or VG-2.
®
Integrated Real Voice (XTR-335)
Quiet Mode
When selected, Real Voice® will be used to
articulate the following:
Pressing Quiet cancels the audio during an alert and
any new alert within 20 seconds. After approximately
20 seconds, 2 beeps are provided on any new alert,
and the unit then remains quiet.
Highway Mode
1. Band Identification
2. Safety Warning System messages
3. Feature Selection
Highway mode provides full audio warnings any time
radar (X, K, Ka, Safety Radar) or laser signals are
detected, and is recommended for open road driving.
• Press Quiet to cancel the audio.
Voice OFF/ON is selected by holding quiet
button for approximately 2 seconds. Voice ON
will announce "caution", Voice OFF will give a
• Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
double beep.
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
LASER/RADAR ALERTS
Vehicle Battery Saver Mode
Laser Audio / Visual Alerts
Twin Alert Periscopes
The Vehicle Battery Saver Mode automatically
shuts off your detector after 6 hours. The timer
is reset if the detector is turned off, unplugged
or any button is pressed before the time has
expired. The detector will alert you with an
audible and visual warning before it shuts off.
During this warning, you can momentarily reset
the unit by pressing any button. This will reset
the timer. If the unit has automatically turned
itself off, press any button to turn the unit back on.
When a laser signal is detected, the display
indicates alert by illuminating the “V/L” and
scrolling the signal strength indicators from right
to left or display indicates an “L” on the
display. The audio alert is continuous for a
minimum of 3 seconds.
Whistler’s new Twin Alert Periscopes provides an
additional attention getting visual alert. The two
extra LED’s flash on and off when the unit alarms
to provide a unique visual alert. This alert can be
programmed, through the Option Select Mode to:
1. flash for all alarms, 2. remain on, or 3. turn LEDs
off completely. (XTR -265/335 only)
Laser Tips
Dim/Dark Mode
If you are the targeted vehicle, a laser gun
can often determine your speed within a few
seconds after you receive an alert. In this
situation there is generally no time to safely
adjust your speed. However, if you are
traveling near or behind the targeted
vehicle and receive an alert, response time
should be sufficient. Any laser alert, regardless
of duration, requires immediate action!
(XTR-265/335)
Dim/Dark Mode reduces the illumination of the
display.
Stay Alert Feature
(XTR-265/335)
• Press the Dark button to reduce illumination to a
Dim setting.
The Stay Alert Feature is designed to test a
driver’s alertness. To engage (when unit is not
alarming):
• Press the Dark button a second time engages Dark
Mode.
In Dark mode display illumination is further
reduced.Dim or dark can be engaged
during an alert. In Dark Mode, the display
goes dark for as long as a signal is being
detected and for 20 seconds after, then the
display returns to the dimmer setting.
•
Press and hold the City button for less then 2 seconds.
The ”H” or “C” will flash indicating Stay Alert is
activated.Within 30-60 seconds two beeps are
sounded; to show alertness, the driver must press
either the City, Menu or Quiet button within 3-5
seconds. If the button is pressed within 3-5 seconds,
the cycle is repeated. If a button was not pressed
within 3-5 seconds, the alarm sounds and the display
flashes all the LEDs.
®
Pulse Protection
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains “off” until activated to measure the
speed of a targeted vehicle. When a pulse
type transmission is detected, your Whistler
detector sounds an urgent 3-second audio
warning . Models XTR145 will flash the Alert
strength indicators at their fastest rate; on
models XTR-265/335 a “P” will be displayed.
After the 3-second pulse alert, the standard
alert pattern continues for as long as the signal
is present. It is important to respond
• Pressing the Dark button a third time restores full
illumination to the display.
•
Press Dark to cancel Stay Alert.
Engaging/Disengaging VG-2
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT operate a
vehicle if you are drowsy. During extended periods of
vehicle operation, you should take frequent breaks.
Improper reliance on the Stay Alert may result in vehicle
damage, personal injury or death.
See Option Select Mode to turn this feature on.
NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
promptly to a pulse alert, since warning
time may be minimal.
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER/RADAR ALERTS
POP™ MODE ALERTS
Because POP™ Mode radar utilizes the same
K or Ka band frequencies, POP™ Mode Alerts will be
displayed as regular radar alerts.
RESET FEATURES
™
All user features can be reset to factory settings.
Safety Warning System/Audio/Visual
Alerts When your Whistler detector detects a
safety radar signal, it provides a distinctive audio
tone and the Numeric Icon display shows an
“S.” and a decimal point when a Safety radar
signal is detected. (XTR-265/335)
POP Mode Alerts (XTR-265/335)
Default Factory
1. Unplug Power Cord from unit.
2. Press and hold Quiet.
3. Plug the Power Cord into the unit.
(Power switch turned on)
OPTION SELECT MODE
Alert
Option Select Mode (XTR-145)
4. Wait for 2 beeps.
5. Release the Quiet button.
Unit is now reset.
To turn VG-2 ON/OFF, press the Menu button and the
“V” icon will illuminate indicating VG-2 is engaged.
Press the Menu button again to disengage VG-2.
XTR-265/335
XTR-265/335
Default Factory Settings are:
• Highway Mode.
Option Select Mode (XTR-265/335)
Press the Menu button to enter Option Select
Mode. Each press of the Menu button changes
to the next selectable feature.
S
S
W
W
S
S
Display
Display
• Dim/Dark Mode to full illumination of display.
• Auto Quiet Mode OFF.
Note: You will not be able to receive SWS alerts if
transmitters are not located in your area.
• VG-2 Detection Mode OFF.
• Self Test Mute OFF
D
Q
The Dark ( ) button and the Quiet ( ) button
turns the feature ON/OFF or Blinking. The
decimal point illumination indicates whether a
feature is on or off. A button must be pressed
within 20 seconds or Option Select Mode will
automatically be exited.
VG-2 ALERTS
• Dual LED Alert Periscope to Flash
• POP™ Mode ON (XTR-335)
VG-2 Detection Mode
The VG-2, also known as a “radar detector
detector,” is a special receiver used by police to
detect signals radiated by a radar detector. See
page 21 for more information on VG-2.
TROUBLESHOOTING GUIDE
Your Whistler detector is expertly
engineered and designed to exacting
quality standards to provide you with
reliable, trouble-free operation. If your unit
has been correctly installed following the
guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
Model: XTR-265
When a VG-2 signal is detected, the VG-2 alert
is sounded. After 3 seconds, the audio is
cancelled and the VG-2 indicator flashes at a
slower rate. Every 30 seconds, the detector
checks for a VG-2 signal. This cycle is repeated if
the VG-2 signal is detected again. If no signal is
detected, two beeps are provided indicating an
“all clear” condition.
Feature:
VG-2 (default = OFF)
Option:
DD for ON, QQ for OFF
Dual LED Alert Periscope DD or QQfor ON, OFF, BLINKING
(default = Blinking with alert)
Model: XTR-335
PROBLEM: No display or audio.
Check fuse in plug; replace if necessary with a
2 amp 3AG type. Check fuse for lighter
socket; replace if necessary. Make sure
cigarette the lighter socket is clean.
PROBLEM: Audio alerts are not loud
enough. Cancel Auto Quiet Mode or City
Mode. Check audio level setting (see pg.8).
Feature:
Option:
During the period a VG-2 signal is detected, a
radar signal cannot be detected. However,
because the VG-2 alert has confirmed that a
patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust
your speed accordingly. Laser detection is not
affected while a VG-2 signal is detected.
D for ON, QQ for OFF
D
VG-2 (default = OFF)
D or for ON, OFF, BLINKING
D
QQ
Dual LED Alert Periscope
(default = Blinking with alert)
POP™ Mode
DD for ON, QQfor OFF
(default = ON)
SWS
DD for ON, QQfor OFF
(default = ON)
14
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
ARE DETECTORS LEGAL?
SPEED MONITORING
Radar Facts
PROBLEM: The unit alarms when vehicle hits
bumps. Check for loose lighter socket; tighten
and clean. Check connections at both ends of
power cord. Substitute another cord to
determine if the cord is defective. Return the
defective cord to the factory.
In Most States YES!
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are then picked up by the radar
gun’s receiving section. When a radar beam
reflects off a moving target, a measurable
frequency shift occurs. The radar unit converts
this shift into miles per hour to determine your
vehicle’s speed. Currently, the FCC (Federal
Communications Commission) permits
Laser-Radar detectors are legal in every
state (with the exception of Virginia and
Washington, D.C., which have local
regulations restricting the use of radar
receivers in any vehicle) when used in
automobiles or light trucks (under 10,000
lbs.).
Concerning trucks over 10,000 lbs., the
Federal Highway Administration (FHWA)
issued a regulation, effective January, 1994
which prohibits radar and laser detector use
in these types of vehicles nationally. Prior to
the FHWA regulation, laws existed in the
state of New York restricting the use of radar
detectors in trucks over 18,000 lbs. and in
Illinois in trucks over 26,000 lbs.
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide,
please call Whistler Customer Service at
1-800-531-0004 or visit our FAQ page at
before returning your unit for service.
operation of traffic radar guns at X Band
(10.500 - 10.550 GHz), K Band (24.050 - 24.250
GHz), and Ka Band (33.400 - 36.000 GHz).
Note: A radar detector will only alarm if an
officer is transmitting on any one of the above
radar bands.
Care & Maintenance
During the summer months, avoid
prolonged exposure to direct sunlight by
removing your unit from the dash when
your vehicle is parked for an extended
period of time. Do not spray water,
cleaners, or polishes directly onto the unit.
The spray may penetrate through the
openings and damage the unit. Also, do
not use any abrasive cleaners on the unit’s
exterior.
Laser Facts
FCC Information
It’s well documented that many radar guns
cannot reliably provide the speed of a
targeted vehicle that is traveling in a group of
vehicles. In contrast, a laser gun can target a
specific vehicle out of a line of traffic and
determine its speed. The advantage of laser
over radar in terms of target identification is
the result of the laser gun’s narrow beam. A
radar transmission can cover more than a
four-lane highway at a distance of 1,000 feet,
compared with a laser transmission which
covers about 3 feet at the same distance. For
best protection, keep these points, listed on
the following section, in mind:
FCC ID: HSXWH10 - XTR-145/265/335
FCC ID: HSXWH21 - XTR-145/265/335
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
IMPORTANT: FCC requirements state that
changes or modifications not expressly
approved by Whistler could void the user’s
authority to operate the equipment.
17
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED MONITORING
SPEED MONITORING
WARRANTY INFORMATION
Laser Facts (Continued)
Radar Detector Detectors (VG-2)
Spectre The Interceptor VG-2, or simply VG-2,
is a microwave receiver used by police to
detect signals radiated by the local oscillator
of a radar detector. Because its purpose is to
identify persons driving with radar detectors,
the VG-2 is known as a “radar detector
detector”.The VG-2 is a tool used by the
police to identify radar detector equipped
vehicles. If caught, in a state where detectors
are illegal, (see page 18), drivers risk losing
their radar detector and receiving a fine. In
addition, instant-on radar is almost always
used in combination with a VG-2, leaving
Consumer Warranty
This Whistler Laser/Radar detector is
warranted to the original purchaser for a period
of one year from the date of original purchase
against all defects in materials and
workmanship. This limited warranty is void if
the unit is abused, modified, installed
improperly, if the housing has been removed,
or if the serial number is missing. There are no
express warranties covering this product other
than those set forth in this warranty. All
express or implied warranties for this product
are limited to one year. Whistler is not liable
for damages arising from the use, misuse, or
operation of this product.
• Because your vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting your Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
won’t either.
• The receiving range of your laser detector
will not be the same as a radar detector. Laser
guns are most often used at short range.
unsuspecting motorists vulnerable to receiving
two tickets—one potentially for speeding, the
other for possession of a detector. Having a
radar detector capable of detecting the VG-2
may alert you to the presence of a speed trap.
Whistler Laser/Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 10nm.
Service Out of Warranty
Units will be repaired at “out of warranty” service rates
when:
• The units original warranty has expired.
• A dated store receipt is not supplied.
• The unit has been returned without its serial number.
• The unit has been abused, modified, installed
improperly, or had its housing removed.
Other Speed Detection Systems
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can
provide a warning.
For more information on speed monitoring
technologies, please visit our F.A.Q. page on
our website: www.whistlergroup.com
It is the responsibility of the individual radar
detector operator to know and understand the
laws in your area regarding the legality of the
use of radar detectors.
Service Under Warranty During the
warranty period, defective units will be
These techniques include:
repaired without charge when returned with a
dated store receipt to the address below. Units
returned without dated store receipt will be
handled as described in section “Service Out
Of Warranty.” Due to the specialized equipment
necessary for testing a laser/radar receiver,
there are no authorized service stations for
Whistler brand detectors other than Whistler.
When returning a unit for service, please follow
Pacing
•
- A patrol car drives behind you and
NOTE: Having a radar detector capable of
detecting the VG-2 may alert you to the
presence of a speed trap. The newest tool
Police have to detect radar detectors is
called Spectre. Spectre can detect the
majority of undetectable (VG-2) laser/radar
detectors on the market.
matches your driving speed.
• Vascar/Aircraft - The time it takes a vehicle
to travel a known distance is measured.
these instructions:
21
22
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
WARRANTY INFORMATION
Service Out of Warranty (Continued)
The minimum out of warranty service fee for
your Whistler detector is $35.00 (U.S.). If you
require out of warranty service, please
return your unit as outlined in the section
“Service Under Warranty” along with a
certified check or money order for $35.00.
Payment may also be made by MasterCard,
VISA or American Express; personal checks
are not accepted.
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
Whistler Repair Dept.
551 N. 13th St.
Rogers, AR. 72756
Please allow 3 weeks turn around time.
IMPORTANT: Whistler will not assume
responsibility for loss or damage incurred in
shipping. Therefore, please ship your unit insured
with return receipt requested. COD’s will not be
accepted!
In the event repairs cannot be covered by
the minimum $35.00 service fee, you will be
contacted by a Whistler technical service
specialist who will outline options available to
you. If you elect not to have your unit
repaired, it will be returned to you along
with your certified check or money order.
IMPORTANT: When returning your unit for
service, be certain to include a daytime
telephone number and an email address
(if applicable).
2.
Include with your unit the following
information,clearly printed:
•
Your name and street address (for shipping via
UPS), a daytime telephone number and an e-mail
address, if applicable.
A detailed description of the problem (e.g., “Unit
performs self-test but does not respond to radar”).
A copy of your dated store receipt or bill of sale.
•
•
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space: ________.
Units without serial numbers are not covered under warranty.
IMPORTANT: To validate that your unit is
within the warranty period, make sure you
keep a copy of your dated store receipt. You
may register your warranty online at
www.whistlergroup.com, however, for
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
Customer Service
If you have questions concerning the
operation of your Whistler detector, or
require service during or after the warranty
period, please call Customer Service at:
1-800-531-0004.
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).
www.whistlergroup.com
23
24
ACCESSORIES
SPECIFICATIONS
Laser Wavelength:
905 50 nanometers (nm)
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visiting our online store
at www.whistlergroup.com
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Order #
202138
Descriiption
Visor Bracket
Price
$ 6.95
$ 9.95
$14.95
$15.95
$ 9.95
202151
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
Operating Temperature Range:
-10 C to +70 C (14 F to +158 F)
206552
206553
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
206880
Hardwire Kit (10' )
(for wiring to fuse box)
206666
Modular* Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821
#7,215,276
159032
402081
206660
Package of 8 Suction Cups
Non Skid Dash Pad
$ 2.95
$ 6.95
POP™ Mode is a trademark of MPH Industries,
Straight Modular Cord &
Socket Multiplier
Inc.
$11.95
SWS® is a trademark of Safety Warning System L.C.
Specifications are subject to change without notice.
206661
Coiled Modular Cord &
Socket Multiplier
$12.95
$ 9.95
500501
Zipped Travel Case
*Modular: Interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00 Prices are
subject to change without notice.
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|