INTRODUCTION
OWNER’S MANUAL
Dear Whistler Owner,
Note: Your warranty period begins at
the time of purchase. The warranty
is validated only by the dated store
receipt! Please record the serial num-
ber of the unit in the space provided in
the warranty section of the manual.
To fully acquaint yourself with the
operation of your Whistler detector
and to better understand the differ-
ences between detecting radar, laser
and safety radar signals, we recom-
mend reading this entire manual or
visiting our FAQ page on our website
www.whistlergroup.com
If you have questions concerning the oper-
ation of this Whistler product please
call:
XTR-
140/255/260/330
™
CuSTOmer SeRVICE
To
t
a
l
B
a
n
d
PProteection
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
LASER-RADAR
DETECTOR
www.whistlergroup.com
Please keep the receipt in a safe place.
You may register your product online
at www.whistlergroup.com. For warranty
verification purposes, a copy of your dated
store receipt must accompany any unit sent
in for warranty work. If the unit is
The Whistler Group Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
Enjoy your Whistler detector and
Whistler Customer Return Center
551 N. 13th St. • Rogers, AR 72756
please drive safely.
Customer Service Tel 800.531.0004
Sincerely,
The Whistler Group, Inc.
www.whistlergroup.com
returned without a dated store receipt, an
out of warranty service charge applies.
P/N 260011,
©
Whistler 2007, REV2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE DESCRIPTIONS
FEATURE DESCRIPTIONS
INSTALLATION
Whistler’s ergonomic and user-friendly design
provides a new level of operating convenience. Special
features include:
12a. Numeric Icon Display (XTR-255/260/330)
combines icon display with a 7 segment digital
display that shows signal strength indication
and band identification.
Mounting Guidelines
•
Mount the unit as low as possible near the center of
the windshield.
Do not mount the unit behind wipers, ornaments,
mirrored sunscreens, etc. These obstructions have
metal surfaces which can affect radar and laser signals
and reduce critical warning time.
(Regular tinted glass does not affect reception.)
Some windshields have an Instaclear™ or Electriclear™
type coating, which affects radar signals. Consult your
dealer or the owner’s manual to determine if your
windshield has this coating.
•
Note: Not all units have all features listed.
12b. Dual Alert Display: D.A.D. (XTR-255/260)
provides additional visual alerts of threats
ahead.
1. Bracket Release Button – provides quick
and easy release of the mounting bracket.
2. Speaker – provides distinct audio warnings
for X, K, Ka band radar, safety radar, laser and
VG-2.
12c. Dual Alert LED Periscope - provides
additional visual alerts.
•
13. VG-2/Laser Icon – indicates the unit is
receiving VG-2 or laser signals.
3. Mounting Bracket Location – slot holds
mounting bracket firmly.
14. X-band Icon - indicates the unit is receiving
an X-band signal.
4. Radar Antenna – compact, high-efficiency
antenna receives radar signals.
•
•
Avoid placing unit in direct contact with the wind
shield.
To reduce the possibility of theft, conceal the unit
when not in use.
15. K-band Icon - indicates the unit is receiving a
K-band signal.
5. Front Laser – high gain optical lens provides
increased sensitivity and field of view for
leading-edge laser detection.
16. Ka-band Icon - indicates the unit is receiving
a Ka-band signal.
Windshield Mounting
6. Rear Laser – an integrated optical
waveguide provides superior detection of
laser signals transmitted from behind.
7. City Button - reduces the annoyance of
false alerts typically encountered in urban
driving areas.
17. H - indicates unit is in Highway mode.
•
Install the two suction cups and rubber bumper onto
the bracket by fitting them into their holes.
Press the suction cups onto the windshield at the
location you have chosen.
18. C - City Icon - indicates that the unit is
•
operating in city mode.
19. Signal Strength Icon - indicates the strength
of the signal being detected.
20. K/Ka-band Icon - shows the unit is receiving
a K or Ka band signal. K/Ka indicator will
flash for Ka band.
21. V - indicates that the unit is receiving a
VG-2 signal. Indicates that VG-2 is engaged.
22. L - indicates that the unit is receiving a laser
signal.
• Total Band Protection™ - Complete Band
Coverage that detects laser, radar, VG-2 and safety
radar bands.
8. Quiet Button - pressing QUIET before a
radar signal is detected engages Auto Quiet
Mode which provides “clicking” sounds
after the initial warning. Pressing QUIET
during a radar encounter silences audio
alerts, while allowing visual alerts to keep
you informed.
IMPORTANT: Some newer cars have a plastic
safety coating on the inside of the windshield. The
windshield bracket may leave permanent marks on
this type of surface. To find out if your vehicle has this
type of windshield, check the owner’s manual or ask
your dealer. We recommend that you do not leave
the suction cup bracket on the windshield in direct
sunlight. If the detector is removed, this may cause
blistering of the dash in some vehicles.
9. Power / Volume Control – turns unit on/off
and adjusts audio level.
10. Dim Dark - engages Dim/Dark modes
11. Menu Button - (XTR-140) turns VG2 on/off.
(XTR-255/260/330) enters option select mode.
12. Icon Display - offers easy-to-read display to
indicate power, city mode, radar band
identification, and signal strength.
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
OPERATION
OPERATION
Power Connection
Feature Engaged Confirmation
Each time a button is pressed, one beep confirms the
feature is “on”, two beeps confirm feature “off”.
City/City I/City II Mode
•
Plug the small end of the power cord into the
unit’s power jack.
Plug the large end into the vehicle’s cigarette
lighter.
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door openers,
intrusion alarms and other devices which share fre-
quencies with police radar. Generally, X band is
used for these devices.
•
Self Test Mute
Simply press the Quiet button during the self-test
sequence to cancel the self-test audio. This will
not affect radar/laser alerts. To restore the self-
test audio, simply press the Quiet button during
the next self-test.
Fuse Replacement
• Press City button to cancel Highway mode and
engage City Mode. The display will switch from
“H” to “C”.
• Press City button again to enter City I Mode.
• Press City button again to enter City II Mode.
The lighter socket plug is equipped with a replaceable
2 amp 3AG fuse located behind the silver tip. To
replace the fuse, carefully unscrew the tip of the plug.
Setting Saver (XTR-255/260/330)
Setting Saver saves your personalized settings so
that when the detector is turned off and then on
again, you do not have to re-enter them.
Note: After 3 seconds, “I” or “II” City Mode
indicator turns off on the XTR-140.
• Pressing City button a fourth time cancels City II
Mode and returns the unit to Highway Mode.
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
additional beeps are provided. City I and City II
Modes operate the same as Highway Mode, but
in City I Mode, only the X band sensitivity is low-
ered. In City II Mode, X-band is not detected.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser or VG-2.
IMPORTANT: Unscrew slowly. The tip
contains a spring which may fly out when disas-
sembling. Insert the new fuse with the spring and screw
on the tip. With use, the screw cap on the plug
may loosen. Retighten it occasionally.
Auto Quiet Mode
Pressing QUIET before a radar signal is detected
provides an alternate alert pattern, consisting of four
beeps (indicating X, K, Ka or Safety Radar) followed
by clicking. The clicking will continue for as long as
the detected signal is present or any new signal is
detected within 20 seconds, becoming more rapid
as the strength of the signal increases.
OPERATION
Power On Self Test & Volume
Each time your Whistler detector is turned on, an
automatic self-test sequence confirms that the speak-
er and visual displays are functional. To increase the
volume, continue turning the
• Press Quiet (before a signal is detected) to
engage Auto Quiet.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
volume knob.
Highway Mode
®
Integrated Real Voice (XTR-330)
Highway mode provides full audio warnings any time
radar (X, K, Ka, Safety Radar) or laser signals are
detected, and is recommended for open road driving.
When selected, Real Voice® will be used to artic-
ulate the following:
Quiet Mode
1. Band Identification
2. Safety Warning System messages
3. Feature Selection
Pressing Quiet cancels the audio during an alert and
any new alert within 20 seconds. After approximately
20 seconds, 2 beeps are provided on any new alert,
and the unit then remains quiet.
Voice OFF/ON is selected by holding quiet but-
ton for approximately 2 seconds. Voice ON will
• Press Quiet to cancel the audio.
announce "caution", Voice OFF will give a dou-
• Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
9
ble beep.
8
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
LASER/RADAR ALERTS
Laser Audio / Visual Alerts
Dual Alert Display D.A.D. (XTR-255/260)
Whistler’s Dual Alert Display (D.A.D.) provides an
additional attention getting visual alert to the
already Intense Blue Numeric Display. The two
extra LED’s in the display area flash on and off
when the unit alarms to provide a unique visual
alert. D.A.D. can be programmed, through the
Option Select Mode to:
Engaging/Disengaging VG-2
See Option Select Mode to turn this feature on.
Vehicle Battery Saver Mode
When a laser signal is detected, the display indi-
cates alert by illuminating the “V/L” and scrolling
the signal strength indicators from right to left or
display indicates an “L” on the display. The
audio alert is continuous for a minimum of 3
seconds.
The Vehicle Battery Saver Mode automatically
shuts off your detector after 6 hours. The timer
is reset if the detector is turned off, unplugged
or any button is pressed before the time has
expired. The detector will alert you with an
audible and visual warning before it shuts off.
During this warning, you can momentarily reset
the unit by pressing any button. This will reset
the timer. If the unit has automatically turned
itself off, press any button to turn the unit back on.
Laser Tips
1. flash for all alarms, 2. remain on, or 3. turn
D.A.D. off completely.
If you are the targeted vehicle, a laser gun
can often determine your speed within a few
seconds after you receive an alert. In this
situation there is generally no time to safely
adjust your speed. However, if you are
traveling near or behind the targeted
vehicle and receive an alert, response time
should be sufficient. Any laser alert, regardless
of duration, requires immediate action!
Dual LED Alert Periscope
Whistler’s new Dual LED Alert Periscope provides
an additional attention getting visual alert. The
two extra LED’s flash on and off when the unit
alarms to provide a unique visual alert. This alert
can be programmed, through the Option Select
Mode to: 1. flash for all alarms, 2. remain on, or 3.
turn LEDs off completely.
Stay Alert Feature (XTR-255/260/330)
The Stay Alert Feature is designed to test a
driver’s alertness. To engage (when unit is not
alarming):
®
•
Press and hold the City button for less then 2 seconds.
The ”H” or “C” will flash indicating Stay Alert is
activated.Within 30-60 seconds two beeps are
sounded; to show alertness, the driver must press
either the City, Menu or Quiet button within 3-5
seconds. If the button is pressed within 3-5 seconds,
the cycle is repeated. If a button was not pressed
within 3-5 seconds, the alarm sounds and the display
flashes all the LEDs.
Pulse Protection
Dim/Dark Mode (XTR-255/260/330)
Dim/Dark Mode reduces the illumination of the
display.
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains “off” until activated to measure the
speed of a targeted vehicle. When a pulse
type transmission is detected, your Whistler
detector sounds an urgent 3-second audio
warning and flashes the Alert strength
indicators at their fastest rate. After the
3-second pulse alert, the standard alert pat-
tern continues for as long as the signal is pres-
ent. It is important to respond promptly to a
pulse alert, since warning time may be mini-
mal.
•
Press the Dark button to reduce illumination to a
Dim setting.
•
Press the Dark button a second time engages Dark
Mode.
In Dark mode display illumination is further
reduced.Dim or dark can be engaged dur-
ing an alert. In Dark Mode, the display goes
dark for as long as a signal is being detect-
ed and for 20 seconds after, then the display
returns to the dimmer setting.
•
Press Dark to cancel Stay Alert.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT operate a
vehicle if you are drowsy. During extended periods of
vehicle operation, you should take frequent breaks.
Improper reliance on the Stay Alert may result in vehicle
damage, personal injury or death.
•
Pressing the Dark button a third time restores full
illumination to the display.
NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER/RADAR ALERTS
POP™ MODE ALERTS
Because POP™ Mode radar utilizes the same
K or Ka band frequencies, POP™ Mode Alerts will be
displayed as regular radar alerts.
TROUBLESHOOTING GUIDE
™
Safety Warning System/Audio/Visual
Alerts When your Whistler detector detects a
safety radar signal, it provides a distinctive audio
tone and the Numeric Icon display shows an
“S.” and a decimal point when a Safety radar sig-
nal is detected. (XTR-255/260/330)
POP Mode Alerts
Reset Features
All user features can be reset to factory settings.
Default Factory
1. Unplug Power Cord from unit.
2. Press and hold Quiet.
3. Plug the Power Cord into the unit.
(Power switch turned on)
OPTION SELECT MODE
Alert
Option Select Mode (XTR-140)
To turn VG-2 ON/OFF, press the Menu button and the
“V” icon will illuminate indicating VG-2 is engaged.
Press the Menu button again to disengage VG-2.
4. Wait for 2 beeps.
5. Release the Quiet button.
Unit is now reset.
XTR-260/330
SWS Display
Option Select Mode (XTR-255/260/330)
Press the Menu button to enter Option Select
Mode. Each press of the Menu button changes
to the next selectable feature.
The Dark (D) button and the Quiet (Q) button
turns the feature ON/OFF or Blinking. The deci-
mal point illumination indicates whether a fea-
ture is on or off. A button must be pressed with-
in 20 seconds or Option Select Mode will auto-
matically be exited.
Default Factory Settings are:
• Highway Mode.
Note: You will not be able to receive SWS alerts if
transmitters are not located in your area.
• Dim/Dark Mode to full illumination of display.
• Auto Quiet Mode OFF.
• VG-2 Detection Mode OFF.
• Self Test Mute OFF
VG-2 ALERTS
• D.A.D. ON (XTR-255/260)
VG-2 Detection Mode
• Dual LED Alert Periscope to Flash
• POP™ Mode ON (XTR-330)
The VG-2, also known as a “radar detector
detector,” is a special receiver used by police to
detect signals radiated by a radar detector. See
page 21 for more information on VG-2.
Your Whistler detector is expertly
Model: XTR-255/260
engineered and designed to exacting
quality standards to provide you with
reliable, trouble-free operation. If your unit
has been correctly installed following the
guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
Feature:
Option:
D for ON, Q for OFF
When a VG-2 signal is detected, the VG-2 alert
is sounded. After 3 seconds, the audio is can-
celled and the VG-2 indicator flashes at a slower
rate. Every 30 seconds, the detector checks for a
VG-2 signal. This cycle is repeated if the VG-2
signal is detected again. If no signal is detected,
two beeps are provided indicating an “all clear”
condition.
VG-2 (default = OFF)
Dual LED Alert Periscope D or Q for ON, OFF, BLINKING
(default = Blinking with alert)
Dual Alert Display
(default = Blinking with alert)
D or Q for ON, OFF, BLINKING
Model: XTR-330
Feature:
VG-2 (default = OFF)
PROBLEM: No display or audio.
Check fuse in plug; replace if necessary with a
2 amp 3AG type. Check fuse for lighter sock-
et; replace if necessary. Make sure cigarette
the lighter socket is clean.
PROBLEM: Audio alerts are not loud
enough. Cancel Auto Quiet Mode or City
Mode. Check audio level setting (see pg.8).
Option:
D for ON, Q for OFF
During the period a VG-2 signal is detected, a
radar signal cannot be detected. However,
because the VG-2 alert has confirmed that a
patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust
your speed accordingly. Laser detection is not
affected while a VG-2 signal is detected.
Dual LED Alert Periscope D or Q for ON, OFF, BLINKING
(default = Blinking with alert)
POP™ Mode
(default = ON)
D for ON, Q for OFF
SWS
D for ON, Q for OFF
(default = ON)
14
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
ARE DETECTORS LEGAL?
SPEED MONITORING
Radar Facts
PROBLEM: The unit gives laser alert when
In Most States YES!
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are then picked up by the radar
gun’s receiving section. When a radar beam
reflects off a moving target, a measurable
frequency shift occurs. The radar unit converts
this shift into miles per hour to determine your
vehicle’s speed. Currently, the FCC (Federal
Communications Commission) permits
Laser-Radar detectors are legal in every
state (with the exception of Virginia and
Washington, D.C., which have local regula-
tions restricting the use of radar receivers in
any vehicle) when used in automobiles or
light trucks (under 10,000 lbs.).
Concerning trucks over 10,000 lbs., the
Federal Highway Administration (FHWA)
issued a regulation, effective January, 1994
which prohibits radar and laser detector use
in these types of vehicles nationally. Prior to
the FHWA regulation, laws existed in the
state of New York restricting the use of radar
detectors in trucks over 18,000 lbs. and in
Illinois in trucks over 26,000 lbs.
accelerating. See F. A. Q. on website.
PROBLEM: The unit alarms when vehicle hits
bumps. Check for loose lighter socket; tighten
and clean. Check connections at both ends of
power cord. Substitute another cord to
determine if the cord is defective. Return the
defective cord to the factory.
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide,
please call Whistler Customer Service at
1-800-531-0004 or visit our FAQ page at
before returning your unit for service.
operation of traffic radar guns at X Band
(10.500 - 10.550 GHz), K Band (24.050 - 24.250
GHz), and Ka Band (33.400 - 36.000 GHz).
Note: A radar detector will only alarm if an
officer is transmitting on any one of the above
radar bands.
Care & Maintenance
During the summer months, avoid
prolonged exposure to direct sunlight by
removing your unit from the dash when
your vehicle is parked for an extended
period of time. Do not spray water,
cleaners, or polishes directly onto the unit.
The spray may penetrate through the
openings and damage the unit. Also, do
not use any abrasive cleaners on the unit’s
exterior.
FCC Information
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a
targeted vehicle that is traveling in a group of
vehicles. In contrast, a laser gun can target a
specific vehicle out of a line of traffic and
determine its speed. The advantage of laser
over radar in terms of target identification is
the result of the laser gun’s narrow beam. A
radar transmission can cover more than a
four-lane highway at a distance of 1,000 feet,
compared with a laser transmission which
covers about 3 feet at the same distance. For
best protection, keep these points, listed on
the following section, in mind:
FCC ID: HSXWH10 - XTR-140/255/260/330
FCC ID: HSXWH21 - XTR-140/255/260/330
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
IMPORTANT: FCC requirements state that
changes or modifications not expressly
approved by Whistler could void the user’s
authority to operate the equipment.
17
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED MONITORING
SPEED MONITORING
WARRANTY INFORMATION
Laser Facts (Continued)
Radar Detector Detectors (VG-2)
Spectre The Interceptor VG-2, or simply VG-2,
is a microwave receiver used by police to
detect signals radiated by the local oscillator
of a radar detector. Because its purpose is to
identify persons driving with radar detectors,
the VG-2 is known as a “radar detector
detector”.The VG-2 is a tool used by the
police to identify radar detector equipped
vehicles. If caught, in a state where detectors
are illegal, (see page 18), drivers risk losing
their radar detector and receiving a fine. In
addition, instant-on radar is almost always
used in combination with a VG-2, leaving unsus-
pecting motorists vulnerable to receiving two
tickets—one potentially for speeding, the other
for possession of a detector. Having a radar
detector capable of detecting the VG-2 may
alert you to the presence of a speed trap.
Consumer Warranty
This Whistler Laser/Radar detector is warrant-
ed to the original purchaser for a period of one
year from the date of original purchase against
all defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, if the housing
has been removed, or if the serial number is
missing. There are no express warranties cov-
ering this product other than those set forth in
this warranty. All express or implied warranties
for this product are limited to one year.
• Because your vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting your Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
won’t either.
• The receiving range of your laser detector
will not be the same as a radar detector. Laser
guns are most often used at short range.
Whistler is not liable for damages arising from
the use, misuse, or operation of this product.
Service Out of Warranty
Whistler Laser/Radar detectors receive all current
Units will be repaired at “out of warranty” service rates
when:
laser guns which operate at a laser wavelength of 905
+/- 10nm.
•The units original warranty has expired.
•A dated store receipt is not supplied.
•The unit has been returned without its serial number.
•The unit has been abused, modified, installed
improperly, or had its housing removed.
• Pro Laser™ I II III
• LTI 20-20
For more information on speed monitoring
technologies, please visit our F.A.Q. page on
our website: www.whistlergroup.com
It is the responsibility of the individual radar
detector operator to know and understand the
laws in your area regarding the legality of the
use of radar detectors.
• Ultra Lyte
Other Speed Detection Systems
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can
provide a warning.
Service Under Warranty During the
warranty period, defective units will be
repaired without charge when returned with a
dated store receipt to the address below. Units
returned without dated store receipt will be
handled as described in section “Service Out
Of Warranty.” Due to the specialized equipment
necessary for testing a laser/radar receiver,
there are no authorized service stations for
Whistler brand detectors other than Whistler.
These techniques include:
NOTE: Having a radar detector capable of
detecting the VG-2 may alert you to the pres-
ence of a speed trap. The newest tool
Police have to detect radar detectors is
called Spectre. Spectre can detect the
majority of undetectable (VG-2) laser/radar
detectors on the market.
• Pacing - A patrol car drives behind you and
matches your driving speed.
• Vascar/Aircraft - The time it takes a vehicle
to travel a known distance is measured.
21
22
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
ACCESSORIES
WARRANTY INFORMATION
SPECIFICATIONS
Laser Wavelength:
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visiting our online store
at www.whistlergroup.com
When returning a unit for service, please follow
these instructions:
Service Out of Warranty (Continued)
The minimum out of warranty service fee for
your Whistler detector is $35.00 (U.S.). If you
require out of warranty service, please
return your unit as outlined in the section
“Service Under Warranty” along with a
certified check or money order for $35.00.
Payment may also be made by MasterCard,
VISA or American Express; personal checks
are not accepted.
905 50 nanometers (nm)
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Order # Description
Price
$ 6.95
$ 9.95
$14.95
$15.95
$ 9.95
W
h
i
s
t
l
e
r
R
e
p
a
i
r
DDept.
202138
202151
206552
206553
206880
Visor Bracket
551 N. 13th St.
Rogers, AR. 72756
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
Operating Temperature Range:
-20˚ C to +80˚ C (-4˚ F to +176˚ F)
Please allow 3 weeks turn around time.
IMPORTANT: Whistler will not assume
responsibility for loss or damage incurred in
shipping. Therefore, please ship your unit insured
with return receipt requested. COD’s will not be
accepted!
In the event repairs cannot be covered by
the minimum $35.00 service fee, you will be
contacted by a Whistler technical service
specialist who will outline options available to
you. If you elect not to have your unit
repaired, it will be returned to you along
with your certified check or money order.
IMPORTANT: When returning your unit for
service, be certain to include a daytime
telephone number and an email address
(if applicable).
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
Hardwire Kit (10' )
(for wiring to fuse box)
206666
Modular* Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
2. Include with your unit the following
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821
#7,215,276
information,clearly printed:
159032
402081
206660
Package of 8 Suction Cups
Non Skid Dash Pad
$ 2.95
$ 6.95
•Your name and street address (for shipping via
UPS), a daytime telephone number and an e-mail
address, if applicable.
POP™ Mode is a trademark of MPH Industries,
Straight Modular Cord &
Socket Multiplier
•A detailed description of the problem (e.g., “Unit
performs self-test but does not respond to radar”).
•A copy of your dated store receipt or bill of sale.
Inc.
$11.95
SWS® is a trademark of Safety Warning System L.C.
206661
500501
Coiled Modular Cord &
Socket Multiplier
Customer Service
$12.95
$ 9.95
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space: ________.
Units without serial numbers are not covered under warranty.
IMPORTANT: To validate that your unit is
within the warranty period, make sure you
keep a copy of your dated store receipt. You
may register your warranty online at
www.whistlergroup.com, however, for
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
If you have questions concerning the
operation of your Whistler detector, or
require service during or after the warranty
period, please call Customer Service at:
Zipped Travel Case
*Modular: Interconnecting pieces cord and plug.
Specifications are subject to change without
notice.
S
h
b
i
p
p
i
n
t
g
a
n
h
d
a
h
a
e
n
d
w
l
i
i
n
g
(
u
p
t
e
r
o
r
d
e
r)
$5
.00
Prices
aare
su
je
to
ng
th
nnotice.
1-800-531-0004.
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).
www.whistlergroup.com
23
24
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|