Whistler Radar Detector XTR 140, XTR 260, XTR 330 User Manual

INTRODUCTION  
OWNER’S MANUAL  
Dear Whistler Owner,  
Note: Your warranty period begins at  
the time of purchase. The warranty  
is validated only by the dated store  
receipt! Please record the serial num-  
ber of the unit in the space provided in  
the warranty section of the manual.  
To fully acquaint yourself with the  
operation of your Whistler detector  
and to better understand the differ-  
ences between detecting radar, laser  
and safety radar signals, we recom-  
mend reading this entire manual or  
visiting our FAQ page on our website  
www.whistlergroup.com  
If you have questions concerning the oper-  
ation of this Whistler product please  
call:  
XTR-140/260/330  
To  
t
a
l
B
a
n
d
PProteection  
CuSTOmer SeRVICE  
LASER-RADAR  
DETECTOR  
1-800-531-0004  
Monday - Friday • 8:00 am - 5:00 pm CT  
or visit our website  
www.whistlergroup.com  
Please keep the receipt in a safe place.  
You may register your product online  
at www.whistlergroup.com. For warranty  
verification purposes, a copy of your dated  
store receipt must accompany any unit sent  
in for warranty work. If the unit is  
The Whistler Group Corporate Headquarters  
13016 N. Walton Blvd. • Bentonville, AR 72712  
Tel 479.273.6012 • Fax 479.273.2927  
Enjoy your Whistler detector and  
Whistler Customer Return Center  
1201 N. Dixieland Rd. • Rogers, AR 72756  
please drive safely.  
Customer Service Tel 800.531.0004  
Sincerely,  
The Whistler Group, Inc.  
www.whistlergroup.com  
returned without a dated store receipt, an  
out of warranty service charge applies.  
P/N 260011,  
©
Whistler 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURE DESCRIPTIONS  
FEATURE DESCRIPTIONS  
INSTALLATION  
Whistlers ergonomic and user-friendly design  
provides a new level of operating convenience. Special  
features include:  
12a. Numeric Icon Display (XTR-260/330)  
combines icon display with a 7 segment digital  
display that shows signal strength indication  
and band identification.  
Mounting Guidelines  
Mount the unit as low as possible near the center of  
the windshield.  
Do not mount the unit behind wipers, ornaments,  
mirrored sunscreens, etc. These obstructions have  
metal surfaces which can affect radar and laser signals  
and reduce critical warning time.  
(Regular tinted glass does not affect reception.)  
Some windshields have an Instaclearor Electriclear™  
type coating, which affects radar signals. Consult your  
dealer or the owners manual to determine if your  
windshield has this coating.  
Note: Not all units have all features listed.  
12b. Dual Alert Display: D.A.D. (XTR-260)  
provides additional visual alerts of threats  
ahead.  
1. Bracket Release Button – provides quick  
and easy release of the mounting bracket.  
2. Speaker provides distinct audio warnings  
for X, K, Ka band radar, safety radar, laser and  
VG-2.  
12c. Dual Alert LED Periscope - provides  
additional visual alerts.  
13. VG-2/Laser Icon – indicates the unit is  
receiving VG-2 or laser signals.  
3. Mounting Bracket Location – slot holds  
mounting bracket firmly.  
14. X-band Icon - indicates the unit is receiving  
an X-band signal.  
4. Radar Antenna – compact, high-efficiency  
antenna receives radar signals.  
Avoid placing unit in direct contact with the wind  
shield.  
To reduce the possibility of theft, conceal the unit  
when not in use.  
15. K-band Icon - indicates the unit is receiving a  
K-band signal.  
5. Front Laser – high gain optical lens provides  
increased sensitivity and field of view for  
leading-edge laser detection.  
16. Ka-band Icon - indicates the unit is receiving  
a Ka-band signal.  
Windshield Mounting  
6. Rear Laser – an integrated optical  
waveguide provides superior detection of  
laser signals transmitted from behind.  
7. City Button - reduces the annoyance of  
false alerts typically encountered in urban  
driving areas.  
17. H - indicates unit is in Highway mode.  
Install the two suction cups and rubber bumper onto  
the bracket by fitting them into their holes.  
Press the suction cups onto the windshield at the  
location you have chosen.  
18. C - City Icon - indicates that the unit is  
operating in city mode.  
19. Signal Strength Icon - indicates the strength  
of the signal being detected.  
20. K/Ka-band Icon - shows the unit is receiving  
a K or Ka band signal. K/Ka indicator will  
flash for Ka band.  
21. V - indicates that the unit is receiving a  
VG-2 signal. Indicates that VG-2 is engaged.  
22. L - indicates that the unit is receiving a laser  
signal.  
8. Quiet Button - pressing QUIET before a  
radar signal is detected engages Auto Quiet  
Mode which provides “clicking” sounds  
after the initial warning. Pressing QUIET  
during a radar encounter silences audio  
alerts, while allowing visual alerts to keep  
you informed.  
IMPORTANT: Some newer cars have a plastic  
safety coating on the inside of the windshield. The  
windshield bracket may leave permanent marks on  
this type of surface. To find out if your vehicle has this  
type of windshield, check the owners manual or ask  
your dealer. We recommend that you do not leave  
the suction cup bracket on the windshield in direct  
sunlight. If the detector is removed, this may cause  
blistering of the dash in some vehicles.  
9. Power / Volume Control – turns unit on/off  
Total Band Protection™ - Complete Band  
Coverage that detects laser, radar, VG-2 and safety  
radar bands.  
and adjusts audio level.  
10. Dim Dark - engages Dim/Dark modes  
11. Menu Button - (XTR-140) turns VG2 on/off.  
(XTR-260/330) enters option select mode.  
12. Icon Display - offers easy-to-read display to  
indicate power, city mode, radar band  
identification, and signal strength.  
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
OPERATION  
OPERATION  
Power Connection  
Feature Engaged Confirmation  
Each time a button is pressed, one beep confirms the  
feature is “on”, two beeps confirm feature “off”.  
City/City I/City II Mode  
Plug the small end of the power cord into the  
units power jack.  
Plug the large end into the vehicles cigarette  
lighter.  
Whistlers Three Stage City Mode is designed to  
reduce the annoyance of automatic door openers,  
intrusion alarms and other devices which share fre-  
quencies with police radar. Generally, X band is  
used for these devices.  
Self Test Mute  
Simply press the Quiet button during the self-test  
sequence to cancel the self-test audio. This will  
not affect radar/laser alerts. To restore the self-  
test audio, simply press the Quiet button during  
the next self-test.  
Fuse Replacement  
• Press City button to cancel Highway mode and  
engage City Mode. The display will switch from  
H” to “C”.  
• Press City button again to enter City I Mode.  
• Press City button again to enter City II Mode.  
The lighter socket plug is equipped with a replaceable  
2 amp 3AG fuse located behind the silver tip. To  
replace the fuse, carefully unscrew the tip of the plug.  
Setting Saver (XTR-260/330)  
Note: After 3 seconds, “I” or “II” City Mode  
indicator turns off on the XTR-140.  
• Pressing City button a fourth time cancels City II  
Mode and returns the unit to Highway Mode.  
In City Mode, weak speed/safety radar signals  
give an initial alarm of two beeps, and then  
remains quiet unless the signal becomes very  
strong. When the signal strength increases, two  
additional beeps are provided. City I and City II  
Modes operate the same as Highway Mode, but  
in City I Mode, only the X band sensitivity is low-  
ered. In City II Mode, X-band is not detected.  
Caution: Some towns/small cities may still be  
using X band radar. City Modes do not change  
the audio alert for laser or VG-2.  
Setting Saver saves your personalized settings so  
that when the detector is turned off and then on  
again, you do not have to re-enter them.  
IMPORTANT: Unscrew slowly. The tip  
contains a spring which may fly out when disas-  
sembling. Insert the new fuse with the spring and screw  
on the tip. With use, the screw cap on the plug  
may loosen. Retighten it occasionally.  
Auto Quiet Mode  
Pressing QUIET before a radar signal is detected  
provides an alternate alert pattern, consisting of four  
beeps (indicating X, K, Ka or Safety Radar) followed  
by clicking. The clicking will continue for as long as  
the detected signal is present or any new signal is  
detected within 20 seconds, becoming more rapid  
as the strength of the signal increases.  
OPERATION  
Power On Self Test & Volume  
Each time your Whistler detector is turned on, an  
automatic self-test sequence confirms that the speak-  
er and visual displays are functional. To increase the  
volume, continue turning the  
• Press Quiet (before a signal is detected) to  
engage Auto Quiet.  
• Once the Auto Quiet mode is engaged, you  
may cancel the audio alarm by pressing Quiet.  
• Press Quiet (when the unit is not alarming) to  
cancel Auto Quiet mode.  
volume knob.  
Highway Mode  
®
Integrated Real Voice (XTR-330)  
Highway mode provides full audio warnings any time  
radar (X, K, Ka, Safety Radar) or laser signals are detect-  
ed, and is recommended for open road driving.  
When selected, Real Voice® will be used to artic-  
ulate the following:  
Quiet Mode  
1. Band Identification  
2. Safety Warning System messages  
3. Feature Selection  
Pressing Quiet cancels the audio during an alert and  
any new alert within 20 seconds. After approximately  
20 seconds, 2 beeps are provided on any new alert,  
and the unit then remains quiet.  
Voice OFF/ON is selected by holding quiet but-  
ton for approximately 2 seconds. Voice ON will  
• Press Quiet to cancel the audio.  
announce "caution", Voice OFF will give a dou-  
• Press Quiet a second time during an alert to restore the  
standard audio alert pattern; or turn the unit off, then on.  
9
ble beep.  
8
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
OPERATION  
LASER/RADAR ALERTS  
Laser Audio / Visual Alerts  
Dual Alert Display D.A.D. (XTR-260)  
Whistlers Dual Alert Display (D.A.D.) provides an  
additional attention getting visual alert to the  
already Intense Blue Numeric Display. The two  
extra LEDs in the display area flash on and off  
when the unit alarms to provide a unique visual  
alert. D.A.D. can be programmed, through the  
Option Select Mode to:  
Engaging/Disengaging VG-2  
See Option Select Mode to turn this feature on.  
Vehicle Battery Saver Mode  
When a laser signal is detected, the display indi-  
cates alert by illuminating the “V/L” and scrolling  
the signal strength indicators from right to left or  
display indicates an “L” on the display. The  
audio alert is continuous for a minimum of 3  
seconds.  
The Vehicle Battery Saver Mode automatically  
shuts off your detector after 6 hours. The timer  
is reset if the detector is turned off, unplugged  
or any button is pressed before the time has  
expired. The detector will alert you with an  
audible and visual warning before it shuts off.  
During this warning, you can momentarily reset  
the unit by pressing any button. This will reset  
the timer. If the unit has automatically turned  
itself off, press any button to turn the unit back on.  
Laser Tips  
1. flash for all alarms, 2. remain on, or 3. turn  
D.A.D. off completely.  
If you are the targeted vehicle, a laser gun  
can often determine your speed within a few  
seconds after you receive an alert. In this  
situation there is generally no time to safely  
adjust your speed. However, if you are  
traveling near or behind the targeted  
vehicle and receive an alert, response time  
should be sufficient. Any laser alert, regardless  
of duration, requires immediate action!  
Dual LED Alert Periscope  
Whistlers new Dual LED Alert Periscope provides  
an additional attention getting visual alert. The  
two extra LEDs flash on and off when the unit  
alarms to provide a unique visual alert. This alert  
can be programmed, through the Option Select  
Mode to: 1. flash for all alarms, 2. remain on, or 3.  
turn LEDs off completely.  
Stay Alert Feature (XTR-260/330)  
The Stay Alert Feature is designed to test a  
drivers alertness. To engage (when unit is not  
alarming):  
®
Press and hold the City button for less then 2 seconds.  
The ”H” or “C” will flash indicating Stay Alert is  
activated.Within 30-60 seconds two beeps are  
sounded; to show alertness, the driver must press  
either the City, Menu or Quiet button within 3-5  
seconds. If the button is pressed within 3-5 seconds,  
the cycle is repeated. If a button was not pressed  
within 3-5 seconds, the alarm sounds and the display  
flashes all the LEDs.  
Pulse Protection  
Dim/Dark Mode (XTR-260/330)  
Dim/Dark Mode reduces the illumination of the  
display.  
Pulse (or instant-on) radar is more difficult to  
detect than conventional radar because it  
remains “off” until activated to measure the  
speed of a targeted vehicle. When a pulse  
type transmission is detected, your Whistler  
detector sounds an urgent 3-second audio  
warning and flashes the Alert strength  
indicators at their fastest rate. (The XTR-  
260/330 models display “P”.) After the  
3-second pulse alert, the standard alert pat-  
tern continues for as long as the signal is pres-  
ent. It is important to respond promptly to a  
pulse alert, since warning time may be mini-  
mal.  
Press the Dark button to reduce illumination to a  
Dim setting.  
Press the Dark button a second time engages Dark  
Mode.  
In Dark mode display illumination is further  
reduced.Dim or dark can be engaged dur-  
ing an alert. In Dark Mode, the display goes  
dark for as long as a signal is being detect-  
ed and for 20 seconds after, then the display  
returns to the dimmer setting.  
Press Dark to cancel Stay Alert.  
WARNING!!! Stay Alert is NOT intended as a  
substitute for adequate rest. You should NOT operate a  
vehicle if you are drowsy. During extended periods of  
vehicle operation, you should take frequent breaks.  
Improper reliance on the Stay Alert may result in vehicle  
damage, personal injury or death.  
Pressing the Dark button a third time restores full  
illumination to the display.  
NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.  
11  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LASER/RADAR ALERTS  
POP™ MODE ALERTS  
Because POPMode radar utilizes the same  
K or Ka band frequencies, POPMode Alerts will be  
displayed as regular radar alerts.  
TROUBLESHOOTING GUIDE  
Safety Warning System/Audio/Visual  
Alerts When your Whistler detector detects a  
safety radar signal, it provides a distinctive audio  
tone and the Numeric Icon display shows an  
“S.” and a decimal point when a Safety radar sig-  
nal is detected. (XTR-260/330)  
POP Mode Alerts  
Reset Features  
All user features can be reset to factory settings.  
Default Factory  
1. Unplug Power Cord from unit.  
2. Press and hold Quiet.  
3. Plug the Power Cord into the unit.  
(Power switch turned on)  
OPTION SELECT MODE  
Alert  
Option Select Mode (XTR-140)  
To turn VG-2 ON/OFF, press the Menu button and the  
“V” icon will illuminate indicating VG-2 is engaged.  
Press the Menu button again to disengage VG-2.  
4. Wait for 2 beeps.  
5. Release the Quiet button.  
Unit is now reset.  
XTR-260/330  
SWS Display  
Option Select Mode (XTR-260/330)  
Press the Menu button to enter Option Select  
Mode. Each press of the Menu button changes  
to the next selectable feature.  
The Dark (D) button and the Quiet (Q) button  
turns the feature ON/OFF or Blinking. The deci-  
mal point illumination indicates whether a fea-  
ture is on or off. A button must be pressed with-  
in 20 seconds or Option Select Mode will auto-  
matically be exited.  
Default Factory Settings are:  
• Highway Mode.  
Note: You will not be able to receive SWS alerts if  
transmitters are not located in your area.  
• Dim/Dark Mode to full illumination of display.  
• Auto Quiet Mode OFF.  
• VG-2 Detection Mode OFF.  
• Self Test Mute OFF  
VG-2 ALERTS  
• D.A.D. ON (XTR-260)  
VG-2 Detection Mode  
• Dual LED Alert Periscope to Flash  
• POP™ Mode ON (XTR-330)  
The VG-2, also known as a “radar detector  
detector,” is a special receiver used by police to  
detect signals radiated by a radar detector. See  
page 21 for more information on VG-2.  
Your Whistler detector is expertly  
Model: XTR-260  
engineered and designed to exacting  
quality standards to provide you with  
reliable, trouble-free operation. If your unit  
has been correctly installed following the  
guidelines in this manual, but is not  
operating optimally, please refer to the  
troubleshooting guide below.  
Feature:  
Option:  
D for ON, Q for OFF  
When a VG-2 signal is detected, the VG-2 alert  
is sounded. After 3 seconds, the audio is can-  
celled and the VG-2 indicator flashes at a slower  
rate. Every 30 seconds, the detector checks for a  
VG-2 signal. This cycle is repeated if the VG-2  
signal is detected again. If no signal is detected,  
two beeps are provided indicating an “all clear”  
condition.  
VG-2 (default = OFF)  
Dual LED Alert Periscope D or Q for ON, OFF, BLINKING  
(default = Blinking with alert)  
Dual Alert Display  
(default = Blinking with alert)  
D or Q for ON, OFF, BLINKING  
Model: XTR-330  
Feature:  
VG-2 (default = OFF)  
PROBLEM: No display or audio.  
Check fuse in plug; replace if necessary with a  
2 amp 3AG type. Check fuse for lighter sock-  
et; replace if necessary. Make sure cigarette  
the lighter socket is clean.  
PROBLEM: Audio alerts are not loud  
enough. Cancel Auto Quiet Mode or City  
Mode. Check audio level setting (see pg.8).  
Option:  
D for ON, Q for OFF  
During the period a VG-2 signal is detected, a  
radar signal cannot be detected. However,  
because the VG-2 alert has confirmed that a  
patrol car is nearby, you are already aware of the  
potential for speed monitoring and can adjust  
your speed accordingly. Laser detection is not  
affected while a VG-2 signal is detected.  
Dual LED Alert Periscope D or Q for ON, OFF, BLINKING  
(default = Blinking with alert)  
POPMode  
(default = ON)  
D for ON, Q for OFF  
SWS  
D for ON, Q for OFF  
(default = ON)  
14  
15  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
ARE DETECTORS LEGAL?  
SPEED MONITORING  
Radar Facts  
PROBLEM: The unit gives laser alert when  
In Most States YES!  
A radar gun operates by transmitting radio  
waves at certain frequencies which reflect off  
objects and are then picked up by the radar  
guns receiving section. When a radar beam  
reflects off a moving target, a measurable  
frequency shift occurs. The radar unit converts  
this shift into miles per hour to determine your  
vehicles speed. Currently, the FCC (Federal  
Communications Commission) permits  
Laser-Radar detectors are legal in every  
state (with the exception of Virginia and  
Washington, D.C., which have local regula-  
tions restricting the use of radar receivers in  
any vehicle) when used in automobiles or  
light trucks (under 10,000 lbs.).  
Concerning trucks over 10,000 lbs., the  
Federal Highway Administration (FHWA)  
issued a regulation, effective January, 1994  
which prohibits radar and laser detector use  
in these types of vehicles nationally. Prior to  
the FHWA regulation, laws existed in the  
state of New York restricting the use of radar  
detectors in trucks over 18,000 lbs. and in  
Illinois in trucks over 26,000 lbs.  
accelerating. See F. A. Q. on website.  
PROBLEM: The unit alarms when vehicle hits  
bumps. Check for loose lighter socket; tighten  
and clean. Check connections at both ends of  
power cord. Substitute another cord to  
determine if the cord is defective. Return the  
defective cord to the factory.  
If difficulties occur which cannot be solved by  
information in this Troubleshooting Guide,  
please call Whistler Customer Service at  
1-800-531-0004 or visit our FAQ page at  
before returning your unit for service.  
operation of traffic radar guns at X Band  
(10.500 - 10.550 GHz), K Band (24.050 - 24.250  
GHz), and Ka Band (33.400 - 36.000 GHz).  
Note: A radar detector will only alarm if an  
officer is transmitting on any one of the above  
radar bands.  
Care & Maintenance  
During the summer months, avoid  
prolonged exposure to direct sunlight by  
removing your unit from the dash when  
your vehicle is parked for an extended  
period of time. Do not spray water,  
cleaners, or polishes directly onto the unit.  
The spray may penetrate through the  
openings and damage the unit. Also, do  
not use any abrasive cleaners on the units  
exterior.  
FCC Information  
Laser Facts  
Its well documented that many radar guns  
cannot reliably provide the speed of a  
targeted vehicle that is traveling in a group of  
vehicles. In contrast, a laser gun can target a  
specific vehicle out of a line of traffic and  
determine its speed. The advantage of laser  
over radar in terms of target identification is  
the result of the laser guns narrow beam. A  
radar transmission can cover more than a  
four-lane highway at a distance of 1,000 feet,  
compared with a laser transmission which  
covers about 3 feet at the same distance. For  
best protection, keep these points, listed on  
the following section, in mind:  
FCC ID: HSXWH10 - XTR-140/260/330  
FCC ID: HSXWH21 - XTR-140/260/330  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference  
received, including interference that may cause  
undesired operation.  
IMPORTANT: FCC requirements state that  
changes or modifications not expressly  
approved by Whistler could void the users  
authority to operate the equipment.  
17  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPEED MONITORING  
SPEED MONITORING  
WARRANTY INFORMATION  
Laser Facts (Continued)  
Radar Detector Detectors (VG-2)  
Spectre The Interceptor VG-2, or simply VG-2,  
is a microwave receiver used by police to  
detect signals radiated by the local oscillator  
of a radar detector. Because its purpose is to  
identify persons driving with radar detectors,  
the VG-2 is known as a “radar detector  
detector”.The VG-2 is a tool used by the  
police to identify radar detector equipped  
vehicles. If caught, in a state where detectors  
are illegal, (see page 18), drivers risk losing  
their radar detector and receiving a fine. In  
addition, instant-on radar is almost always  
used in combination with a VG-2, leaving unsus-  
pecting motorists vulnerable to receiving two  
tickets—one potentially for speeding, the other  
for possession of a detector. Having a radar  
detector capable of detecting the VG-2 may  
alert you to the presence of a speed trap.  
Consumer Warranty  
This Whistler Laser/Radar detector is warrant-  
ed to the original purchaser for a period of one  
year from the date of original purchase against  
all defects in materials and workmanship. This  
limited warranty is void if the unit is abused,  
modified, installed improperly, if the housing  
has been removed, or if the serial number is  
missing. There are no express warranties cov-  
ering this product other than those set forth in  
this warranty. All express or implied warranties  
for this product are limited to one year.  
• Because your vehicles license plate or  
headlights are the laser guns primary targets,  
mounting your Whistler detector on the  
dashboard can improve laser detection at short  
range.  
• Do not follow closely behind any vehicle you  
cannot see through. If you can’t see past a  
vehicle ahead of you, chances are your detector  
won’t either.  
• The receiving range of your laser detector  
will not be the same as a radar detector. Laser  
guns are most often used at short range.  
Whistler is not liable for damages arising from  
the use, misuse, or operation of this product.  
Service Out of Warranty  
Whistler Laser/Radar detectors receive all current  
Units will be repaired at “out of warranty” service rates  
when:  
laser guns which operate at a laser wavelength of 905  
+/- 10nm.  
•The units original warranty has expired.  
•A dated store receipt is not supplied.  
•The unit has been returned without its serial number.  
•The unit has been abused, modified, installed  
improperly, or had its housing removed.  
• Pro LaserI II III  
LTI 20-20  
For more information on speed monitoring  
technologies, please visit our F.A.Q. page on  
our website: www.whistlergroup.com  
It is the responsibility of the individual radar  
detector operator to know and understand the  
laws in your area regarding the legality of the  
use of radar detectors.  
• Ultra Lyte  
Other Speed Detection Systems  
Several techniques other than radar or laser are  
used to measure vehicle speeds. When these  
methods are being used, no detector can  
provide a warning.  
Service Under Warranty During the  
warranty period, defective units will be  
repaired without charge when returned with a  
dated store receipt to the address below. Units  
returned without dated store receipt will be  
handled as described in section “Service Out  
Of Warranty.” Due to the specialized equipment  
necessary for testing a laser/radar receiver,  
there are no authorized service stations for  
Whistler brand detectors other than Whistler.  
These techniques include:  
NOTE: Having a radar detector capable of  
detecting the VG-2 may alert you to the pres-  
ence of a speed trap. The newest tool  
Police have to detect radar detectors is  
called Spectre. Spectre can detect the  
majority of undetectable (VG-2) laser/radar  
detectors on the market.  
• Pacing - A patrol car drives behind you and  
matches your driving speed.  
• Vascar/Aircraft - The time it takes a vehicle  
to travel a known distance is measured.  
When returning a unit for service, please follow  
21  
22  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY INFORMATION  
ACCESSORIES  
WARRANTY INFORMATION  
SPECIFICATIONS  
Laser Wavelength:  
These and other accessories can be  
ordered directly from Whistler by calling  
1-800-531-0004 or visiting our online store  
at www.whistlergroup.com  
When returning a unit for service, please follow  
these instructions:  
Service Out of Warranty (Continued)  
The minimum out of warranty service fee for  
your Whistler detector is $35.00 (U.S.). If you  
require out of warranty service, please  
return your unit as outlined in the section  
“Service Under Warranty” along with a  
certified check or money order for $35.00.  
Payment may also be made by MasterCard,  
VISA or American Express; personal checks  
are not accepted.  
905 50 nanometers (nm)  
1. Ship the unit in the original carton or in a  
suitable sturdy equivalent, fully insured, with  
return receipt requested to:  
Radar Frequencies:  
10.500 - 10.550 GHz (X Band)  
24.050 - 24.250 GHz (K Band )  
33.400 - 36.000 GHz (Ka Superwideband)  
Order # Description  
Price  
$ 6.95  
$ 9.95  
$14.95  
$15.95  
$ 9.95  
W
h
i
s
t
l
e
r
R
e
p
a
i
r
DDept.  
202138  
202151  
206552  
206553  
206880  
Visor Bracket  
1201 North Dixieland Rd  
Rogers, AR. 72756  
Windshield Bracket Kit  
Straight Power Cord (5’)  
Coiled Power Cord (7’)  
Operating Temperature Range:  
-20˚ C to +80˚ C (-4˚ F to +176˚ F)  
Please allow 3 weeks turn around time.  
IMPORTANT: Whistler will not assume  
responsibility for loss or damage incurred in  
shipping. Therefore, please ship your unit insured  
with return receipt requested. COD’s will not be  
accepted!  
In the event repairs cannot be covered by  
the minimum $35.00 service fee, you will be  
contacted by a Whistler technical service  
specialist who will outline options available to  
you. If you elect not to have your unit  
repaired, it will be returned to you along  
with your certified check or money order.  
IMPORTANT: When returning your unit for  
service, be certain to include a daytime  
telephone number and an email address  
(if applicable).  
Power Requirements:  
Operational 12 to 15 volts DC, 250mA nominal  
Vehicle Battery Saver, 30mA nominal.  
Hardwire Kit (10' )  
(for wiring to fuse box)  
206666  
Modular* Cord Package  
(includes coiled and straight  
cords, and power adapter)  
$17.95  
2. Include with your unit the following  
One or more U.S. patents may apply:  
#5,146,227, #5,379,456, #5,666,120, #5,990,821  
information,clearly printed:  
159032  
402081  
206660  
Package of 8 Suction Cups  
Non Skid Dash Pad  
$ 2.95  
$ 6.95  
Your name and street address (for shipping via  
UPS), a daytime telephone number and an e-mail  
address, if applicable.  
POPMode is a trademark of MPH Industries,  
Inc.  
Straight Modular Cord &  
Socket Multiplier  
•A detailed description of the problem (e.g., “Unit  
performs self-test but does not respond to radar”).  
•A copy of your dated store receipt or bill of sale.  
SWS® is a trademark of Safety Warning System L.C.  
$11.95  
206661  
Coiled Modular Cord &  
Socket Multiplier  
Customer Service  
$12.95  
$ 9.95  
3. Be certain your unit is returned with its serial  
number. For reference, please write your units  
serial number in the following space: ________.  
Units without serial numbers are not covered under warranty.  
If you have questions concerning the  
operation of your Whistler detector, or  
require service during or after the warranty  
period, please call Customer Service at:  
500501  
Zipped Travel Case  
Specifications are subject to change without  
notice.  
*Modular: Interconnecting pieces cord and plug.  
S
h
i
p
p
i
ng  
a
n
d
handling  
(per  
order)  
$5  
.00  
Prices  
aare  
IMPORTANT: To validate that your unit is  
within the warranty period, make sure you  
keep a copy of your dated store receipt. You  
may register your warranty online at  
www.whistlergroup.com, however, for  
warranty verification purposes, a copy of  
your dated store receipt must accompany any  
unit sent in for warranty work.  
subject  
to  
change  
without  
nnotice.  
1-800-531-0004.  
Representatives are available to answer your questions  
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).  
www.whistlergroup.com  
23  
24  
25  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Flat Panel Television CW24T9PW User Manual
Whirlpool Freezer EEV 201 X User Manual
Xerox All in One Printer 3100MFP S User Manual
Xerox Printer QLS 8100XE User Manual
Xilinx Computer Hardware ML561 User Manual
Yamaha Speaker System Advanced YST and QD Bass Subwoofers User Manual
Zanussi Cooktop ZKT 652 DX User Manual
Zanussi Electric Pressure Cooker ZKG6010 User Manual
Zanussi Microwave Oven ZMC40ST User Manual
Zanussi Pasta Maker 392127 User Manual