OWNER’S MANUAL
Model Features Summary .................... 2-3
Installation ........................................... 4-6
Dear Whistler Owner,
•Battery Installation
4
5
5
6
6
XCS-800
If you have questions concerning the operation of
•Trim Ring Installation
this Whistler product please call:
•Mounting Guidelines
Battery Powered
LASER-RADAR
•Windshield Mounting
CuSTOmer SeRVICE
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
•Power Connection and Fuse Replacement
Operation .......................................... 7 - 13
•Battery Charging/External Power
•Battery Life
7
8
•Power On and Self-Test
•Feature Engaged Confirmation
•Audio Level Adjustment
•Quiet Mode
8
DETECTOR
8
8
8
•Auto Quiet Mode
9
www.whistlergroup.com
•Backlight Setting
9
•Highway Mode
10
10
11
11
11
11
12
13
Please keep the receipt in a safe place. You may regis-
warranty verification purposes, a copy of your dated
store receipt must accompany any unit sent in for war-
ranty work. If the unit is returned without a dated store
receipt, an out of warranty service charge applies.
Note: Your warranty period begins at the time of pur-
chase. The warranty is validated only by the dated
store receipt! Please record the serial number of the
unit in the space provided in the warranty section of
the manual.
•City/City 1/ City 2 Mode
•Setting Saver
•Engaging/Disengaging VG-2
•Battery Saver Mode
•Teach/Tutorial Mode
•Option Select Mode
•Stay Alert Feature
Safety Warning System™ ......................... 13
POP™ Mode Alerts ................................. 14
Laser/Radar Alerts ................................. 14
The Whistler Group Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
•Speed Radar Audio/Visual Alerts
•Laser Audio/Visual Alerts
•Pulse Protection®
14
14
14
VG-2 Alerts ............................................ 15
To fully acquaint yourself with the operation of your
Whistler detector and to better understand the dif-
ferences between detecting radar, laser and safety
radar signals, we recommend reading this entire
manual or visit our F.A.Q. page on our website
•Alert Priority
15
Customer Return Center
Reset Features ....................................... 16
Troubleshooting Guide ..................... 16 -17
Care and Maintenance ........................... 18
Are Detectors Legal? ............................. 18
FCC Information ..................................... 19
Speed Monitoring ............................ 19 -22
551 North 13th Street. • Rogers, AR 72756
Customer Service Tel 800.531.0004
www.whistlergroup.com
P/N 203322-2, REV1©2007 The Whistler Group, Inc.
•Radar Facts
19
19
Enjoy your Whistler and please drive safely.
Sincerely,
•POP™ Mode
•Total Band Protection™
•Laser Facts
•Other Speed Detection Systems
20
20 - 21
21
The Whistler Group, Inc.
Warranty Information ....................... 22-25
Specifications ......................................... 25
Accessories ............................................ 26
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION
OPERATION
Trim Ring Removal/Installation
To change the trim ring to another color, follow
these simple steps:
Battery Charging
Windshield Mounting
External/Home Battery Charger - The home
battery charger provides approximately 10 hour
recharge time for Ni-MH batteries. Simply
observe the battery polarity when installing the
batteries into the charger and plug the home
charger into a convenient outlet.
Internal/Power Cord - While traveling, plug
your included power cord into your detector
and into your lighter socket to slowly charge the
rechargeable batteries. This will also provide
power to the detector. The display will show an
• Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
Removal
• Locate the tab on the trim ring at the top of
the mounting bracket location.
• Using your fore finger, lift up on the trim ring
and the ring will pop out.
Windshield
Mounting
Rubber Bumper
Installation
• Locate the tab near the button openings and
insert this end first into the unit.
• Gently snap in the other tabs as you work
your way to the back of the unit.
• Press the suction cups onto the windshield at the
location you have chosen.
• Slide the detector onto the bracket until it locks into
place.
asterisk, i.e.,
when the unit is
charging the batteries. The asterisk will flash
during charging and go out when charging is
complete.* Note: Regular batteries (not Ni-Cd)
can be used but NOT with the power cord and
NOT with the home battery charger. When the
power cable is removed from the detector or
the vehicle’s lighter socket is switched off, the
Mounting Guidelines
• If necessary, the unit may be leveled by bending the
windshield bracket.
• Mount the unit as low as possible near the
center of the windshield.
• Press the bracket release button and remove the
detector before bending.
• Do not mount your unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can
affect radar and laser signals and reduce
critical warning time. (Regular tinted glass
does not affect reception.)
Power Cord Connection
• Plug the small end of the power cord into the
unit’s power jack.
unit will alarm and display
simply turns off.
then
• Plug the large end into the vehicle’s cigarette lighter.
• Some windshields have an Instaclear™ or
Electriclear™ type coating, which affect radar
signals. Consult your dealer or the owner’s
manual supplied with your vehicle to determine
if your windshield has this coating.
• Avoid placing unit in direct contact with wind
shield.
Note: As with all battery operated devices,
remove the batteries when this unit will not be
used for an extended period of time. Damage
caused by leaky or improperly charged batteries
are not covered under warranty. Check with the
battery manufacturer about their specific prod-
uct warranty and disposal recommendations.
Note: Cord fits tightly into detector. When
installing the cord, expect some resistance.
Do NOT put alkaline batteries in the detector if
using the power cord.
Fuse Replacement
The lighter socket plug is equipped with a
replaceable 2 amp 3AG fuse located behind the
silver tip. To replace the fuse, carefully unscrew
• To reduce the possibility of theft, conceal your
unit when not in use.
Charging Note: If the unit is displaying 20% or
less and you wish to charge the batteries in the
unit, you must plug in the cigarette lighter cord
and insert into a live 12 volt DC socket for at
least 8 hours or until the battery charge indica-
tor (*) on the display is no longer blinking.
the tip of the plug.
Important: Unscrew slowly. The tip contains a
spring which may fly out when disassembling. Insert
the new fuse with the spring and screw on the tip.
With use, screw cap on plug may loosen. Retighten
occasionally.
Unscrew the tip of the lighter socket plug
carefully when replacing the 2 amp fuse.
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
OPERATION
Battery Life
Auto Quiet Mode
Highway Mode
The unit can provide over 20 hours of laser/radar
detection. There are settings that can maximize
battery life.
Auto Quiet reduces the selected audio level to
level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert for any
new signal within 20 seconds will resume at level
(1). Auto Quiet does not affect VG-2 or laser alerts.
• Press Quiet/Menu (before a signal is detected)
to engage Auto Quiet.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser sig-
nals are detected, and is recommended for open
road driving. (Highway mode lets every signal in)
1) Backlighting set to OFF-OFF
2) Auto Quiet to ON
For more information on City and Highway mode,
please visit our FAQ page on our website:
www.whistlergroup.com
3) Battery saver set to 1 hour
4) Using a lower volume setting
5) Using Mute whenever possible
Power On and Self-Test
City/City 1/City 2 Mode
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
• Press Power. Display shows in order:
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door open-
ers, intrusion alarms and other devices which share fre-
quencies with police radar. Generally, X band is
used for these devices.
Backlight Setting
The backlighting can be programmed to be illumi-
nated all the time, only when alarming, or choices
in-between. The options are selectable by press-
ing and holding the Power/Dim button on the
1. WHISTLER 2. X-Band 3. K-Band
4. Ka-Band
5. LASER
6.POP ON 7. VG2 OFF 8. SR OFF
• Press City to cancel Highway mode and
engage City.
9. Bat Full - This will display the battery status. 10. Highway
Feature Engaged Confirmation
Each time a button is pressed one beep confirms
feature “on”, two beeps confirm feature “off”.
unit. The options are:
• Press City again to enter City 1 Mode
- display shows ‘C1 Lo X’.
OFF-OOFF = Backlight is off during normal
operation and off when the unit alarms
OFF-DDIM = Backlight is off during normal
operation and dim when the unit alarms.
OFF-BBRT = Backlight is off during normal
operation and bright when the unit alarms.
DIM-OOFF = Backlight is dim during normal
operation and off when the unit alarms.
DIM-BBRT = Backlight is dim during normal
operation and bright when the unit alarms.
• Press City again to enter City 2 Mode
- display shows ‘C2 No X’
Audio Level Adjustment
The audio levels can be adjusted high to low or
low to high.
• Pressing City a fourth time cancels City 2 Mode
and returns the unit to Highway Mode.
• Press Volume up to increase audio level.
In City Mode, weak speed/safety radar signal
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
additional beeps are provided. City 1 and City 2
Modes operate the same as Highway Mode, but
in City 1 Mode, only the X band sensitivity is low-
ered. In City 2 Mode, X-band is not detected.
• Press Volume
down to decrease audio level.
As audio level is adjusted, beeps are provided
and the display indicates volume level.
Backlight will turn on, if selected, while the unit
alarms and remain on for 3 seconds after the unit
stops alarming. When any button is pressed the
backlight will illuminate at the dim setting and
remain on for 3 seconds afterwards. The backlight
will also illuminate while in option mode.
Quiet Mode
Quiet cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds,
approximately 2 beeps are provided on any new
alert and unit then remains quiet.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser or VG-2.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to
restore the standard audio alert pattern; or turn
the unit off, then on.
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
OPERATION
Setting Saver
Option Select Mode
Stay Alert Feature
Setting Saver saves your personalized settings
so that when the detector is turned off and then
on again, you do not have to re-enter them.
Entering Option Select Mode allows you to customize
options such as Tone Select, Abbreviated Power Up
Sequence and VG-2 Mode. Press and hold quiet but-
ton to enter Option Select Mode. When selecting
The Stay Alert Feature is designed to test a driver’s
alertness. To engage (when unit is not alarming) :
• Press and hold City for approximately 2 sec-
onds. Release button during or immediately after
the alert is given. Display shows:
Engaging/Disengaging VG-2
options, the volume up
, volume down
or
See Option Select Mode to turn this feature
on/off. For more VG-2 information see page 15.
Quiet buttons must be pressed within 20 seconds or
options mode will automatically be exited. To enter:
Within 30-60 seconds two beeps are sounded;
to show alertness, the driver must press either the
City, Volume, or Quiet buttons within 3-5 seconds. If
a button is pressed within 3-5 seconds, the cycle is
repeated.
Battery Saver Mode
The Vehicle Battery Saver Mode automatically
shuts off the detector if you forget to turn it off.
The timer is reset if the detector is turned off, the
optional power cord is unplugged or any button is
pressed before the timer has expired. The detec-
tor will alert you with an audible and visual warn-
ing before it shuts off. This auto off function can
be programmed for the following: Off, 1, 2, or 3
hours.
Press:
Quiet
Display
Reads:
To Change: Option:
If a button was not pressed within 3-5 seconds
alarm sounds and the display shows:
1st Time
TONE 3
= YES
= NO
Tone 1, 2, 3
(3 different X, K,
Ka Patterns)
• Press Power to exit.
2nd Time TEST YES
= ON
X, K, Ka Audio
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT oper-
ate a vehicle if you are drowsy. During extended
periods of vehicle operation, you should take fre-
quent breaks. Improper reliance on the Stay Alert
feature may result in vehicle damage, personal
injury or death. NEVER OPERATE A VEHICLE IF
YOU ARE DROWSY.
= OFF tones 1 beep
during Power Up
During this warning you can reset the timer by
pressing any button.
3rd Time X-ON
= ON
X Band On
= OFF X Band Off
If the unit has automatically turned itself off, press the
Power button to turn the unit back on. You can man-
ually engage the Battery Saver Mode by pressing
and holding the City button until one beep is
heard.
4th Time K-ON
= ON K Band On
= OFF K Band Off
5th Time Ka-ON
6th Time LASER ON
7th Time VG-2 OFF
8th Time SR OFF
9th Time POP ON
10th Time B SVR 1 HR
= ON
Ka Band On
SWS
= OFF
Ka Band off
Safety Warning System™
= ON
LASER Band On
Refer to “Option Select Mode” for instructions for
changing the Battery Saver Mode settings.
In communities where transmitters are located,
the Safety Warning System™ displays over 60
text messages. When Safety Radar is detected
the audio alert is geiger counter-like.
= OFF LASER Band Off
= ON
Turns VG-2 On
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and
release.
• Display Shows:
• Press Power to exit.
= OFF Turns VG-2 Off
= ON
= OFF
Safety Radar On
Safety Radar Off
Note: Safety Warning System™ is labeled “SR”
in Option Select Mode.
= ON
Pop On
Pop Off
Safety Warning System Text
= OFF
Example: Poor - Road - Surface.
OR
Options are 1H,
2H, 3H & NO
Note: Not all areas have Safety Warning System™
transmitters.
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
POP MODE ALERTS
Because POP™ Mode radar utilizes the same
K or Ka band frequencies, POP™ Mode Alerts will be
displayed as regular radar alerts.
VG-2 ALERTS
RESET FEATURES
Reset Features
POP™ Mode Alerts
VG-2 Audio/Visual Alerts
Note: You must turn this feature on before it will
detect VG-2.
All user features can be reset to factory settings.
•
•
•
•
Unplug Power Cord from unit.
Remove Batteries.
When a VG-2 signal is detected, the VG-2 alert is
sounded and the display flashes “VG-2”. After 3
seconds the audio is canceled and the display
no longer flashes. This cycle is repeated if the
VG-2 signal is again detected. When a VG-2 signal
is detected, the detector ‘hides’ its own radiated signal
and becomes undetectable by the VG-2.
Every 30 seconds, the detector checks for a VG-2
signal. If a VG-2 signal is still present, the unit
continues to hide and repeats the VG-2 alert. If no
signal is detected, two beeps are provided,
indicating an ‘all clear’ condition.
During a VG-2 Alert X, K, and Ka band signals
cannot be received (Reference page 21 for VG-2
information).
However, because the VG-2 alert has confirmed
that a patrol car is nearby, you are already aware
of the potential for speed monitoring and can
adjust your speed accordingly. Laser detection is
not affected while a VG-2 signal is detected.
Press and hold Power and Quiet.
Plug Power Cord into unit.
LASER/RADAR ALERTS
• Wait for 2 beeps.
Release Power and Quiet buttons.
•
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band ID and
signal strength is displayed. The audio alert is
continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
Unit is now reset to the following features
and settings.
Default factory settings are:
1. Audio to level (4).
2. Display shows Highway.
3. Auto Quiet Mode OFF.
4. VG-2 Detection Mode OFF.
5. Safety Radar OFF.
Laser Audio/Visual Alerts
When a laser signal is detected the audio alert is
continuous for a minimum of 3 seconds.
6. Vehicle Battery Saver to 1 hour.
7. Full Power Up sequence.
8. Default TONE 3.
• The Displays Shows:
The more “|||” the closer the laser source.
9. POP ON.
10. Backlighting Dim/Bright
®
Pulse Protection
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains ‘off’ until activated to measure the speed
of a targeted vehicle.
TROUBLESHOOTING
PROBLEM: No display or audio.
• Make sure batteries are installed with the correct
polarity.
• Make sure batteries are fully charged.
• Make sure battery contacts are clean.
• Check fuse in Whistler plug; replace if necessary
with a 2 amp 3AG type.
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audio warning and the display shows:
Alert Priority
When two or more signals are received at the
same time, the alert priority is:
1. Laser
• Check fuse for lighter socket; replace if necessary.
• Make sure lighter socket is clean.
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning time may be minimal.
2. VG-2
3. Speed Radar
4. Safety Radar
PROBLEM: Audio alerts are not loud enough.
• Cancel Auto Quiet Mode or City Mode.
• Check audio level setting (see page 8 ).
Example:
If X band is alerting, then suddenly a VG-2
signal is detected, the VG-2 warning will
override the X band alert.
PROBLEM: Low Battery Life.
• Recharge the batteries using the home charger.
• One or more of the batteries may be defective.
• See the battery life tips on page 8.
PROBLEM: Unit turns itself off
• See battery saver feature on page 11
16
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
CARE AND MAINTENANCE
FCC INFORMATION
PROBLEM: Unit alarms when vehicle hits
bumps.
FCC ID : HSXWH15
Care And Maintenance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
During the summer months, avoid prolonged
exposure to direct sunlight by removing your unit
from the dash when your vehicle is parked for an
extended period of time. Do not spray water,
cleaners, or polishes directly onto the unit. The
spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
• Make sure batteries are seated properly.
• Make sure that the battery door is fully closed.
• Make sure battery contacts are clean.
• Check for loose lighter socket; tighten and
clean.
(1) This device many not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
PROBLEM: Unit not charging in car and unit
displays “NO BAT” or the * is not blinking.
• The batteries may be too low and need to be
refreshed. To refresh the batteries, you need
to charge them in the home charger for 10
hours, remove the charger from the wall outlet
to reset the 10 hour timer and then re-insert
for a 2nd charge of 10 hours. This will peak
and refresh the batteries to maximum capacity.
Important: FCC requirements state that changes
or modifications not expressly approved by Whistler
could void the user’s authority to operate the equip-
ment.
As with all battery operated devices remove the
batteries when this unit will not be used for an
extended period of time. Damage caused by
leaky or improperly charged batteries are not
covered under warranty. Check with the battery
manufacturer about the specific battery warranty.
SPEED MONITORING
Radar Facts
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are picked up by the radar gun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles
per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at X Band (10.500 - 10.550 GHz), K Band
(24.050 - 24.250 GHz), and Ka Band (33.400 -
36.000 GHz).
ARE DETECTORS LEGAL?
PROBLEM: Battery gauge indicates “BATT
FULL” but the unit only a few hours
In Most States YES!
• If you had a low battery warning and you
charge the batteries for 1 or 2 hours using the
power cord, the battery gauge may say BATT
FULL because the battery voltage is greater
than 1.25 volts per cell but the capacity is not
full and as a result the battery operation of
your unit will be greatly diminished. Recharge
the batteries using the home charger
Laser-Radar detectors are legal in every state
(with the exception of Virginia and Washington,
D.C., which have local regulations restricting the
use of radar receivers in any vehicle) when used
in automobiles or light trucks (under 10,000 lbs.).
Concerning trucks over 10,000 lbs., the Federal
Highway Administration (FHWA) issued a
regulation, effective January, 1994 which prohibits
radar and laser detector use in these types of
vehicles nationally. Prior to the FHWA regulation,
laws existed in the state of New York restricting
the use of radar detectors in trucks over 18,000
lbs. and in Illinois in trucks over 26,000 lbs.
overnight or in the unit for at least 8 hours
using the power cord and a live cigarette
lighter socket. The battery gauge is only
accurate if the batteries are fully charged by
the procedures as indicated above.
Note: A radar detector will not alarm if an officer is
not transmitting on any one of the above radar bands.
POP™ Mode
POP™ Mode is a feature on some newer radar
guns operating on K and Ka bands. When the
gun is in POP™ Mode and activated, a brief burst
of energy, less that 1/15 of a second, is transmit-
ted and the vehicle’s speed is quickly acquired. A
detector without POP™ Mode detection capabili-
ty cannot respond to this brief transmission.
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide,
please call Whistler Customer Service at
800.531.0004 or visit our F.A.Q. page at
unit for service.
17
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED MONITORING
SPEED MONITORING
SPEED MONITORING
Total Band Protection™
Note: Having a radar detector capable of
detecting the VG-2 may alert you to the pres-
ence of a speed trap. The newest tool Police
have to detect radar detectors is called Spectre.
As of this printing. Spectre can detect all unde-
tectable (VG-2) laser/radar detectors on the
market.
Laser Tips
Complete Band Coverage that detects laser,
radar, VG-2 and safety radar bands.
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this situa-
tion there is generally no time to safely adjust
your speed. However, if you are traveling near or
behind the targeted vehicle and receive an alert,
response time should be sufficient. Any laser
alert, regardless of duration, requires immediate
action!
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of
target identification is the result of the laser gun’s
narrow beam. A radar gun’s transmission can
cover more than a four-lane highway at a dis-
tance of 1,000 feet, compared with a laser gun’s
transmission which covers about 3 feet at the
same distance. For best protection, keep these
points in mind:
It is the responsibility of the individual radar detector
owner to know and understand the laws in your area
regarding the legality of the use of radar detectors.
Other Speed Detection Systems
WARRANTY INFORMATION
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can provide
a warning. These techniques include:
Consumer Warranty
This Whistler Laser-Radar detector is warranted
to the original purchaser for a period of one year
from the date of original purchase against all
defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, if the housing and/or
serial numbers have been removed. There are no
expresswarranties covering this product other than
those set forth in this warranty. All express or
implied warranties for this product are limited to the
above time. Whistler is not liable for damages
arising from the use, misuse, or operation of this
product.
• Pacing - A patrol car drives behind you and
matches your driving speed.
• Vascar/Aircraft - The time it takes a vehicle to
travel a known distance is measured.
• Because the vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
won’t either.
• The receiving range of your laser detector will
not be the same as a radar detector. Laser guns
are most often used at short range.
Radar Detector Detectors: VG-2,
Spectre
The Interceptor VG-2 or simply VG-2, is one type of
microwave receiver used by Police to detect signals
radiated by the local oscillator of a radar detector.
Because it purpose is to identify persons driving with
radar detectors, these devices are known as a “radar
detector detector” (RDD).
Note: Damaged caused by incorrect battery
placement or battery leakage is not covered
under this warranty.
An RDD is the primary tool used by the police to
identify radar detector equipped vehicles. If caught
in a state or country where detectors are illegal (see
page 18). drivers risk losing their radar detector and
receiving a fine. In addition, instant-on radar is
almost always used in combination with a RDD,
leaving unsuspecting motorists vulnerable to receive
two tickets - one potentially for speeding, the other
for possession of a detector.
Whistler Laser-Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 10mm.
•Pro Laser™ I II III
•LT1 20-20
•Ultra Lyte
20
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
WARRANTY INFORMATION
WARRANTY INFORMATION
ACCESSORIES
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space:
s/n______________.
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
Service Under Warranty
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visit our online store at
www.whistlergroup.com
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below. Units returned without a dated store
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testing a Laser-Radar receiver, there are no
authorized service stations for Whistler brand
detectors other than Whistler.
Customer Service
Units without serial numbers are not covered under warranty.
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Customer Service at:
Important: To validate that your unit is within
the warranty period, make sure you keep a
copy of your dated store receipt. You may
register your warranty online at
Order # Description
Price
500501
600111
202152
206552
206553
206880
Zippered Travel Case
Home Battery Charger
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
$ 9.95
$ 9.95
$ 9.95
$14.95
$15.95
$ 9.95
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or
visit the FAQ’s at www.whistlergroup.com.
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
When returning a unit for service under
warranty, please follow these instructions:
Service Out of Warranty
SPECIFICATIONS
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Units will be repaired at ‘out of warranty’ service
rates when:
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
Hardwire Kit (10' )
(for wiring to fuse box)
• The unit’s original warranty has expired.
• A dated store receipt is not supplied.
• The unit has been returned without its serial
number.
206666
Modular* Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
Whistler Repair Dept.
551 North 13th Street.
Rogers, AR. 72756
• The unit has been abused, modified,
installed improperly, or had its housing
removed.
Operating Temperature Range:-20˚ C to +80˚ C
(-4˚ F to +176˚ F)
402081
206660
Non Skid Dash Pad
$ 6.95
$11.95
Please allow 3 weeks turnaround time.
Straight Modular Cord &
Socket Multiplier
Important: Whistler will not assume responsi-
bility for loss or damage incurred in shipping.
Therefore, please ship your unit insured with
return receipt requested. CODs will not be
accepted!
The minimum out of warranty service fee for
your Whistler detector is $55.00 (U.S.). If you
require out of warranty service, please return
your unit as outlined in the section “Service
Under Warranty” along with a certified check or
money order for $55.00. Payment may also be
made by MasterCard, VISA or American
Express; personal checks are not accepted.
Power Requirements:
4 AA Ni-MH batteries 4.8 volts.
12 volts with power cord.
206661
26005P
Coiled Modular Cord &
Socket Multiplier
$12.95
$14.95
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,82,
#7,215,276
Replaceable Ring and Insert Set
Includes 6 trim rings: metallic
blue, metallic gold, metallic
red, pink, silver and white and
2 inserts: metallic silver and
metallic black.
2. Include with your unit the following
information, clearly printed:
• Your name and street address (for
shipping via UPS), a daytime telephone
number and an email address, if applicable.
• A detailed description of the problem (e.g.,
“Unit performs self-test but does not respond
POP™ Mode is a trademark of MPH Industries,
Inc.
Specifications are subject to change without notice.
In the event repairs cannot be covered by the
minimum $55.00 service fee, you will be con-
tacted by a Whistler technical service special-
ist who will outline options available to you.
If you elect not to have your unit repaired, it will
be returned to you along with your certified
check or money order.
* Modular: Interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00 . Prices are
subject to change without notice.
`
to radar”).
• A copy of your dated store receipt or bill of
sale.
23
24
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|