OWNER’S MANUAL
1790SE
LASER/RADAR DETECTOR
THE WHISTLER GROUP
CORPORATE HEADQUARTERS
13016 N. Walton Blvd.
Bentonville, AR 72712
TEL (501) 273-6012 FX (501) 273-2927
PRODUCT DEVELOPMENT CENTER
25 Industrial Ave.
Chelmsford, MA 01824
TEL (978) 244-1400 FX (978) 244-1492
CUSTOMER RETURN CENTER
1201 N. Dixieland Rd.
Rogers, AR 72756
Consumer Relations Tel (800) 531-0004
Email: info@whistlergroup.com
P/N 1790SE, © WHISTLER 2001
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
WHISTLER FEATURES
Whistler 1790SE
2
10
7
3
1
4
5
8
9
6
Whistler’s ergonomic and user-friendly design provides a
new level of operating convenience. Special features
include:
1. Bracket Release Button – Provides quick and easy
release of the mounting bracket.
2. Power Jack – Provides connection for the power cord.
3. Speaker – Provides distinct audio and Real Voice™
warnings for X, K, Ka band radar, safety radar, laser and
VG-2.
4. Power/Dim/Dark Button – Turns unit on/off and
engages Dim/Dark modes (press and hold for 2 seconds).
5. Volume Up/Down Buttons – Adjust volume up or
down. Pressing both buttons enter compass calibration
mode. In memo mode, select one of nine messages.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WHISTLER FEATURES
WHISTLER FEATURES
6. High Visibility Display – Provides distinct visual confir-
mation of signals detected, signal strength, and indicates
engaged modes of operation.
Accessories
Accessories included are highly functional and easy to use.
Power Cord - Connects to the unit’s power jack and your
7. Quiet/Menu Button - Pressing QUIET before a signal is
detected engages Auto Quiet Mode which automatically
reduces the audio level after the initial warning to a low
audio level setting. Pressing QUIET during a radar/laser
encounter silences audio alerts, while allowing visual alerts to
keep you informed. Pressing and holding for 2 seconds
allows you to enter Option Select Mode (see page 16).
vehicle’s lighter socket.
Windshield Bracket - Allows installation of unit on your
vehicle’s windshield.
Hook & Loop Fasteners - Designed to secure the unit on
a level dashboard.
8. CITY/CITY 1/CITY 2 Button - Reduces the annoyance
of false alerts typically encountered in urban driving areas.
9. Memo Button - Pressing Memo enters Memo Mode
feature. Press & hold (3 seconds) unit will momentarily dis-
play vehicle battery voltage.
10. Lase r Antenna (Rear) - An integrated optical
waveguide provides superior detection of laser signals
transmitted from
11. Laser Antenna (Front) - High gain optical lens
provides increased sensitivity and field of view for leading-
edge laser detection.
12. Radar Antenna - Compact, high-efficiency antenna
receives radar signals.
13. Mounting Bracket Location - Slot holds mounting
bracket firmly.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION
Mounting Guidelines
• Mount the unit as low and level as possible near the center
of the windshield. Unit must be level for compass to func-
tion properly.
• Slide the detector onto the bracket until it locks into place.
• If necessary, the unit may be leveled by bending the wind-
shield bracket. Press the bracket release button and remove
the detector before bending.
• Do not mount your unit behind wipers, ornaments, mirrored
sunscreens, etc. These obstructions have metal surfaces which
can affect radar and laser signals and reduce critical warning
time. (Regular tinted glass does not affect reception.)
• Some windshields have an Instaclear™ or Electriclear™ type
coating, which affect radar signals. Consult your dealer or the
owner’s manual supplied with your vehicle to determine if your
windshield has this coating.
• Avoid placing unit in direct contact with windshield.
• To reduce the possibility of theft, conceal your unit when not
in use.
Dash Mounting
• Make sure the mounting location you have chosen is
relatively level and is clean and dry. Clean with isopropyl
alcohol if necessary to remove any waxes or polishes.
• Separate the fastener strips. Peel the paper backing off
each strip and adhere one piece to the dash and the other
piece to the bottom of the unit, taking care not to cover
the serial number.
Windshield Mounting
• Install the two suction cups and rubber bumper onto the
bracket by fitting them into their holes.
• Press the suction cups onto the windshield at the location
you have chosen. IMPORTANT: Some newer cars have a
plastic safety coating on the inside of the windshie ld. The
suction cups may leave permanent marks on this type of
surface. To find out if your vehicle has this type of wind-
shield, check the owner’s manual or ask your dealer. We
recommend that you do not leave the suction cup bracket
on the window in direct sunlight. If the detector is
removed, this may cause blistering of the dash in some
vehicles.
Be careful not to place the fastener strip over the unit’s serial number. If the
fastener strip is removed, the serial number may be pulled off the unit. Units
without serial numbers are not covered under warranty.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION
Visor Mounting (optional accessory)
Compass Calibration Set-up
• Slide the visor bracket into the bracket mounting slot.
• Clip the visor bracket onto the visor making sure it is
relatively level and has a clear view of the road.
The unit will need to be calibrated in order for the com-
pass to provide accurate readings. To calibrate the unit,
perform the following procedure:
1. Mount the unit level in the center of the vehicle’s wind-
shield in which it will be used. Make sure there are no
other magnetic sources near the detector (i.e., speaker).
2. Select a large clear area (parking lot or field) without any
power lines.
Slide on view
Insert into bracket mounting slot. Do not bend this
section of bracket.
Power Connection
• Plug the small end of the power cord into the unit’s power
jack.
3. While parked, press both volume buttons simultaneous-
ly until unit displays:
• Plug the large end into the vehicle’s cigarette lighter.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2
amp 3AG fuse located behind the silver tip. To replace the
fuse, carefully unscrew the tip of the plug. (IMPORTANT:
Unscrew slowly. The tip contains a spring which may fly out
when disassembling.) Insert the new fuse with the spring and
screw on the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
4. Drive vehicle slowly in two complete circles. If
calibration does not automatically finish press both volume
buttons simultaneously to complete calibration. The unit
will beep twice and display:
Note: If unit mounting is relocated in the vehicle, (i.e.,
visor to windshield mounting or dash mounting), or if the
unit is moved to another vehicle, you must recalibrate the
compass.
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp
fuse.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
Power On And Self-Test
Memory/Beep Confirmation
Each time your Whistler detector is turned on, an auto-
matic self-test sequence confirms that the speaker and
visual displays are functional.
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one
beep confirms feature “on”, two beeps confirm feature
“off”.
• Press
(Power) or apply Power. Display reads:
Audio Level Adjustment
The audio levels can be adjusted high to low, or low to
high, in nine steps: (0) is no audio level, (8) the highest.
• Press Volume up to increase audio level.
• Press Volume down to decrease audio level.
As audio level is adjusted, beeps are provided and the
display indicates volume level. Example:
Compass Mode
The 1790SE is programmed from the factory in “Combo
Mode”. Combo mode means that the unit provides both
compass readings as well as detecting laser/radar signals.
Through the “Option Select Mode” (page 16) or the
“Mode“ Button, the unit can be changed to operate in
Radar Mode (detection of all police bands and laser (no
compass) or Compass Mode (no detection of police laser
radar). Note: The unit must be calibrated to provide accu-
rate compass readings. See Compass Calibration Set-up
section on page 9.
Integrated Real Voice
When selected, Real Voice will be used to articulate the
following:
1.Band Identification
2.Safety Warning System messages
NOTE: In certain cases the voice message does not repli-
cate the text message.
3.Feature Selection
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
City/City 1/City 2 Mode
Auto Quiet Mode
Whistler’s Three Stage City Mode is designed to reduce the
annoyance of automatic door openers, intrusion alarms and
other devices which share frequencies with police radar.
Generally X band is used for these devices.
Auto Quiet reduces the selected audio level to level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20 sec-
onds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
• Press City to engage City. Display reads:
• Press Quiet/Menu (before a signal is detected) to
engage Auto Quiet. Display reads:
• Pressing City a second time engages City 1. Display reads:
• Pressing City a third time engages City 2. Display reads:
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
• Pressing City a fourth time cancels City, City 1, and City 2.
Display reads:
In City Mode, weak speed/safety radar signals give an initial
alarm of two beeps, and then remains quiet unless the signal
becomes very strong. When the signal strength increases,
two additional beeps are provided. In City 1 Mode, only the
X band sensitivity is lowered. In City 2 Mode, X-band is not
detected. CAUTION: When selecting this mode, some
towns/small cities may still be using X band radar.
If Auto Quiet is engaged in City 1 or City 2 modes and the
unit receives a strong radar signal, the unit performs the Auto
Quiet feature. City Modes do not change the audio alert for
laser or VG-2.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, approximately 2 beeps
are provided on any new alert and unit then remains quiet.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the display.
• Press and hold (Power) for 2 seconds to reduce illumi-
nation to a Dim setting. Display reads:
Stay Alert Feature
The Stay Alert Feature is designed to test a driver’s alert-
ness. To engage (when unit is not alarming):
• Press and hold City for approximately 2 seconds.
Release the button during or immediately after the alert is
given. Display reads:
• Pressing and holding
for 2 seconds a second time
engages Dark Mode. Display reads:
Within 30-60 seconds two beeps are sounded; to show alert-
ness, the driver must press either the
(Volume), City or
(Quiet) button within 3-5 seconds. If the button is pressed
within 3-5 seconds, the cycle is repeated.
Dim or dark can be engaged during an alert. In Dark Mode,
the display goes dark for as long as a signal is being detect-
ed and for 20 seconds after, then the display returns to the
dimmer setting.
If a button was not pressed within 3-5 seconds alarm sounds
and the display reads:
• Pressing and holding
tion to the display.
a third time restores full illumina-
• Press
(Power) to exit.
WARNING!!!Stay Alert is NOT intended as a substitute for
adequate rest. You should NOT operate a vehicle if you are
drowsy. During extended periods of vehicle operation, you
should take frequent breaks. Improper reliance on the Stay
Alert feature may result in vehicle damage, personal injury or
death.NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
Engaging/Disengaging VG-2
See Option Select Mode to turn this feature on.
14
15
OPERATION
OPERATION
Option Select Mode
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
Entering Option Select Mode allows you to customize
options such as Tone Select, Compass Select, Abbreviated
Power Up Sequence and VG-2 Mode. When selecting
• Press City and
Display reads:
(Quiet) simultaneously and release.
options, the
,
or must be pressed within 20 seconds
or options mode will automatically be exited. To enter:
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
Press
:
*Display
COMBO
To Change,
Reads:
Option:
Press
(Quiet)
• Press
(Power/Play) to exit.
For 2 seconds
2nd time
or
Combo=Radar & Compass
Radar=No Compass
Memo Mode
Compass=No Radar
Record up to nine distinct message tracks for a total of 90
seconds, one 90 second message or any combination in
between.
IMPORTANT: Unit does not detect radar or laser signals
during recording or while playing a memo.
WARNING!!! Memo mode is not intended to be used
while you are driving. You should not use any device in a
vehicle that may distract you from observing the road
ahead.
TONE 3
= YES
= NO
Tone 1, 2, or 3
(3 different X, K, Ka
patterns)
3rd time
TEST YES
VG2 OFF
= ON
X, K, Ka Audio tones
1 beep during
Power Up
= OFF
4th time
5th time
= ON
Turns VG-2 On
Turns VG-2 Off
= OFF
SAFETY
ON
= ON
= OFF
= ON
Turns Safety Radar On
Turns Safety Radar Off
Real Voice engaged
6th time
VOICE
ON
To record or play a message (Memo mode):
• Press memo button and release. The unit will beep once;
this enters Memo mode. Display reads:
= OFF
Real Voice disengaged
7th time
8th time
9th time
10th time
11th time
B SVR
ON
= ON
Battery Saver On
Battery Saver Off
= OFF
X
= ON
X Band On
X Band Off
Yes
= OFF
K
= ON
K Band On
K Band Off
Yes
= OFF
Ka
= ON
Ka Band On
Ka Band Off
Yes
= OFF
Laser
Yes
= ON
Laser On
Laser Off
= OFF
*Factory settings.
16
17
Press
anytime to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
To exit Memo mode:
• Press and release the
(Quiet/Record) button to begin
• Press memo button and release. The unit will beep twice.
NOTE: Memo mode automatically exits within 20 seconds
if a button is not pressed.
a recording. Note: Recording starts as soon as the button
is released. Display reads:
Vehicle Battery Saver Mode
REC = record, 1 = track #, 8 = time remaining
The Vehicle Battery Saver Mode automatically shuts off
your detector within 3 hours if you forget to turn it off. The
timer is reset if the detector is turned off, unplugged or
any button is pressed before the 3 hours have expired. The
detector will alert you with an audible and visual warning
before it shuts off. Display reads:
If the recording time expires for a track, the unit will auto-
matically switch to the next track. Press and release
(Quiet/Record) again to stop recording. The unit will
automatically stop recording once track 9 is completed.
To play a message:
• Enter Memo mode and press
recorded messages.
(Power/Play) to listen to
•
To play a selected track, press (Vo lume Up) or
(Volume Down) button until selected track appears on
the display. Display reads:
During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.
If the unit has automatically turned itself off, press the
(Power/Play) button to turn the unit back on. You can
manually engage the Vehicle Battery Saver Mode by press-
ing and holding the City button until one beep is heard.
PLY = play, 1 = track #, 8 = time remaining
• Press the
(Power/Play) button.
Messages are kept in memory and are not affected by
resetting the factory features. See “Reset Features” sec-
tion of the manual.
Refer to “Option Select Mode” for instructions for deacti-
vating battery saver mode feature.
To delete a message:
Vehicle Battery Monitor
•
Enter Memo mode and press
(Volume Up) or
The vehicle’s battery voltage can be momentarily dis-
played by pressing and holding the Mode button for 3 sec-
onds. Display reads:
(Volume Down) button until selected track appears on
the display.
• Press the
(Quiet/Record) button twice.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RADAR– ALERTS
SAFETY RADAR ALERTS
Speed Radar Audio/Visual Alerts
In communities where transmitters are located, the Safety
Warning System displays over 60 text messages. When
Safety Radar is detected the audio alert is geiger counter-
like.
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
Safety Warning System Text
Example: Poor Road Surface:
1 = weak signal, 9 = strong signal
Pulse Protection®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display reads:
Note: Not all areas have Safety Warning System transmitters.
for SWS locations.
After 3 seconds standard alert pattern continues.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER/VG-2 ALERTS
RESET FEATURES
Laser Audio/Visual Alerts
Reset Features
When a laser signal is detected the word “Laser” and sig-
nal strength is displayed, the audio alert is continuous for
a minimum of 3 seconds. Example:
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Press and hold
(Power) and
(Quiet).
• Plug Power Cord into unit.
• Wait for 2 beeps.
The more “|||” the closer the laser source.
• Release
and . Unit is now reset.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
1. Audio to level (4).
it will detect VG-2.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Voice ON.
Text message confirms detection of VG-2.
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still detected, the unit continues to hide
and repeats the VG-2 alert. If no signal is detected, two
beeps are provided, indicating an “all clear” condition.
During VG-2 Alert X, K, and Ka band signals cannot be
received. (Reference page 27 for VG-2 information.)
7. Combo ON.
8. Safety ON.
9. Vehicle Battery Saver ON.
10. Full Power Up sequence.
11. Default TONE 3.
12. Unit ON or OFF.
13. All Band ON.
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
NOTE: Must recalibrate compass after resetting detector.
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & MAINTENANCE
TROUBLE SHOOTING GUIDE
Your Whistler detector is expertly engineered and designed to exacting
quality standards to provide you with reliable, trouble-free operation. If
your unit has been correctly installed following the guidelines in this
manual, but is not operating optimally, please refer to the trou-
bleshooting guide below.
Care And Maintenance
During the summer months, avoid prolonged exposure to
direct sunlight by removing your unit from the dash when
your vehicle is parked for an extended period of time.
Do not spray water, cleaners or polishes directly onto the
unit. The spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive cleaners on
the unit’s exterior.
If difficulties occur which cannot be solved by information in this
Troubleshooting Guide, please call Whistler Consumer Relations at 1-
800-531-0004 before returning your unit for service.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ARE DETECTORS LEGAL?
SPEED MONITORING TECHNOLOGIES
Radar Facts
In Most States YES!
A radar gun operates by transmitting radio waves at certain
frequencies which reflect off objects and are then picked up
by the radar gun’s receiving section. When a radar beam
reflects off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles per hour
to determine your vehicle’s speed.
Currently, the FCC (Federal Communications Commission)
permits operation of traffic radar guns at X Band (10.500 -
10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band
(33.400 - 36.000 GHz).
Laser detectors are completely legal in every state when
used in automobiles or light trucks (under 10,000 lbs.).
Similarly, when used in automobiles or light trucks, radar
detectors are legal in almost every state. Exceptions are
Virginia and Washington, D.C., which have local regulations
restricting the use of radar receivers in any vehicle.
Concerning trucks over 10,000 lbs., the Federal Highway
Administration (FHwA) issued
a
regulation, effective
January, 1994 which prohibits radar and laser detector use
in these types of vehicles nationally.
Prior to the FHwA regulation, laws existed in the state of
New York restricting the use of radar detectors in trucks
over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.
Laser Facts
It’s well documented that many radar guns cannot reliably
provide the speed of a targeted vehicle that is traveling in a
group of vehicles. In contrast, a laser gun can target a spe-
cific vehicle out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of target identifi-
cation is the result of the laser gun’s narrow beam. A radar
transmission can cover more than a four-lane highway at a
distance of 1,000 feet, compared with a laser transmission
which covers about 6 feet at the same distance.
For best protection, keep these points in mind:
•
•
•
Because your vehicle’s license plate or headlights are the laser gun’s
primary targets, mounting your Whistler detector on the dashboard can
improve laser detection at short range.
Do not follow closely behind any vehicle you cannot see through. If you
can’t see past a vehicle ahead of you, chances are your detector won’t
either.
The receiving range of your laser detector will not be the same as a radar
detector. Laser guns are most often used at short range.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED MONITORING TECHNOLOGIES
WARRANTY INFORMATION
Consumer Warranty
Other Speed Detection Systems
The 1790SE Whistler detector is warranted to the original
purchaser for a period of three years from the date of original
purchase against all defects in materials and workmanship.
This limited warranty is void if the unit is abused, modi-
fie d, installe d improperly, if the housing has be e n
re moved, or if the serial numbe r is missing . There are no
express warranties covering this product other than those set
forth in this warranty. All express or implied warranties for this
product are limited to three years. Whistler is not liable for
damages arising from the use, misuse, or operation of this
product.
Several techniques other than radar or laser are used to meas-
ure vehicle speeds. When these methods are being used, no
detector can provide a warning. These techniques include:
• Pacing - A patrol car drives behind you and matches your
driving speed.
• Vascar/Aircraft - The time it takes a vehicle to travel a
known distance is measured.
Radar Detector Detectors (VG-2)
The Interceptor VG-2, or simply VG-2, is a microwave receiver
used by police to detect signals radiated by the local oscilla-
tor of a radar detector. Because its purpose is to identify per-
sons driving with radar detectors, the VG-2 is known as a
“radar detector detector”.
The VG-2 is the primary tool used by the police to identify
radar detector equipped vehicles. If caught, in a state where
detectors are illegal, (see page 26), drivers risk losing their
radar detector and receiving a fine. In addition, instant-on
radar is almost always used in combination with a VG-2, leav-
ing unsuspecting motorists vulnerable to receiving two tickets
— one potentially for speeding, the other for possession of a
detector.
Service Under Warranty
During the warranty period, defective units will be repaired or
replaced (with the same or a comparable model), at Whistler’s
option, without charge to the purchaser when returned pre-
paid, with dated proof of purchase to the address below. Units
returned without dated proof of purchase will be handled as
described in section “Service Out Of Warranty.” Due to the
specialized equipment necessary for testing a radar/laser
receiver, there are no authorized service stations for Whistler
brand detectors other than the factory.
When returning a unit for service under warranty, please
follow these instructions:
1. Ship the unit in the original carton or in a suitable sturdy
equivalent, fully insured, with return receipt requested, and
shipping charges prepaid to:
Having a radar detector capable of detecting the VG-2 may
alert you to the presence of a speed trap.
NOTE: For more information on speed monitoring tech-
nologies, visit our FAQ page at
Whistler Repair Dept.
1201 North Dixieland Rd.
Rogers, AR. 72756
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
WARRANTY INFORMATION
Service Out Of Warranty
Units will be repaired at “out of warranty” service rates
when:
IMPORTANT: Whistler will not assume responsibility for loss or
damage incurred in shipping. Therefore, please ship your unit
insured with return receipt requested.
• The unit’s original warranty has expired.
• Dated proof of purchase is not supplied.
2. Include with your unit the following information, clearly printed:
• Your name and street address (for shipping via UPS), and
a daytime telephone number. (No P.O. Box please.)
• A detailed description of the problem (e.g., “Unit per
forms self-test but does not respond to radar”).
• A copy of your dated proof of purchase or bill of sale.
3. Be certain your unit is returned with its serial number. For
reference, please write your unit’s serial number in the following
space: s/n __________________.
• The unit has been returned without its serial number.
• The unit has been abused, modified, installed improper-
ly, or had its housing removed.
The minimum out of warranty service fee for your Whistler
detector is $55.00 (U.S.). If you require out of warranty serv-
ice, please return your unit as outlined in the section
“Service Under Warranty” along with a certified check or
money order for $55.00. Payment may also be made by
MasterCard or VISA; personal checks are not accepted. In
the event repairs cannot be covered by the minimum
$55.00 service fee, you will be contacted by a Whistler
technical service specialist who will outline options avail-
able to you. If you elect not to have your unit
repaired/replaced, it will be returned to you along with
your certified check or money order.
Units without serial numbers are not covered underwarranty.
IMPORTANT: To validate that your unit is within the warranty
period, make sure you keep a copy of your dated proof of
purchase and return the Warranty Validation card.
IMPORTANT: When returning your unit for service, be cer-
tain to include a daytime telephone number.
Consumer Relations
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Consumer Relations at
1-800-531-0004. Representatives are available to answer
your questions Monday - Friday from 8:00 a.m. to 5:00 p.m.
(CST).
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
SPECIFICATIONS
The following accessories can be ordered directly from
Whistler by calling 1-800-531-0004, or by mailing in the
form on page ??.
• Dimensions: 1.6"H x 2.9"W x 4.5"L
• Weight: 7.5 oz.
• Laser Wavelength:
905 ± 50 nanometers (nm)
• Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
• Operating Temperature Range:
-20˚ C to +80˚ C (-4˚ F to +176˚ F)
• Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 70mA nominal.
• Compass:
Accuracy to 5°, Resolution to 5°.
*Modular: interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00
One or more U.S. patents apply: #4,315,261; #5,146,227;
#5,379,456; #5,666,120, and #5,990,821.
Specifications are subject to change without notice.
Prices are subject to change without notice.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORY ORDER FORM
NOTES
PLEASE SHIP TO:
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
Name______________________________________________
Street______________________________________________
City________________________State_______Zip_________
Telephone Number (______) __________________________
Order Code/Description Quantity Total Price
$
Subtotal
Sales Tax (if Applicable)
Shipping and Handling*
Total Enclosed
$
$
5.00
SEND ORDER FORM WITH CERTIFIED CHECK OR
MONEY ORDER TO:
Whistler CTS
PO Box 1844
Bentonville, AR 72712
IF PAYING BY MASTERCARD OR VISA PLEASE PROVIDE:
Type of Card ___MasterCard ___Visa ___American Express
Name on Card______________________________________
Card Number_______________________________________
Expiration Date_____________________________________
Cardholder Signature________________________________
*For expedited shipping costs, contact Whistler Customer Service, 1-800-531-0004
35
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|