1670LD manual 4/11/02 11:48 AM Page 1
OWNER’S MANUAL
1670LD
LASER/RADAR DETECTOR
THE WHISTLER GROUP
CORPORATE HEADQUARTERS
13016 N. Walton Blvd.
Bentonville, AR 72712
TEL (479) 273-6012 FX (479) 273-2927
PRODUCT DEVELOPMENT CENTER
25 Industrial Ave.
Chelmsford, MA 01824
TEL (978) 244-1400 FX (978) 244-1491
CUSTOMER RETURN CENTER
1201 N. Dixieland Rd.
Rogers, AR 72756
Consumer Relations Tel (800) 531-0004
P/N 1670LDMAN/REV2 © WHISTLER 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 5
TABLE OF CONTENTS
WHISTLER FEATURES
Whistler 1670LD
2
9
1
3
7
4
5
8
6
Whistler’s ergonomic and user-friendly design provides a
new level of operating convenience. Special features
include:
1. Bracket Release Button – Provides quick and easy
release of the mounting bracket.
2. Power Jack – Provides connection for the power cord.
3. Speaker – Provides distinct audio and Real Voice™
warnings for X, K, Ka band radar, safety radar, laser and
VG-2.
4. Power/Dim/Dark/Play Button – Turns unit on/off and
engages Dim/Dark modes (press and hold for 2 seconds).
In Memo mode, starts/stops playing a recorded message.
5. Volume Up/Down Buttons – Adjust volume up or
down. In Memo mode, selects one of three messages.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 7
WHISTLER FEATURES
WHISTLER FEATURES
6. High Visibility Display – Provides distinct visual confir-
mation of signals detected, signal strength, and indicates
engaged modes of operation.
Accessories
Accessories included are highly functional and easy to use.
Power Cord - Connects to the unit’s power jack and your
7. Quiet/Menu/Record Button - Pressing QUIET before a
signal is detected engages Auto Quiet Mode which auto-
matically reduces the audio level after the initial warning to a
low audio level setting. Pressing QUIET during a radar/laser
encounter silences audio alerts, while allowing visual alerts to
keep you informed. Pressing and holding for 2 seconds
allows you to enter Option Select Mode (see page 15). In
Memo mode, this button starts/stops recording.
vehicle’s lighter socket.
Windshield Bracket - Allows installation of unit on your
vehicle’s windshield.
Hook & Loop Fasteners - Designed to secure the unit on
a level dashboard.
8. CITY/CITY 1/CITY 2 Button - Reduces the annoyance
of false alerts typically encountered in urban driving areas.
9. Laser Antenna (Rear) - An integrated optical wave-
guide provides superior detection of laser signals trans-
mitted from beh
10. Laser Antenna (Front) - High gain optical lens
provides increased sensitivity and field of view for leading-
edge laser detection.
11. Radar Antenna - Compact, high-efficiency antenna
receives radar signals.
12. Mounting Bracket Location - Slot holds mounting
bracket firmly.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 9
INSTALLATION
INSTALLATION
Mounting Guidelines
• Mount the unit as low as possible near the center of the
windshield.
shield bracket. Press the bracket release button and remove
the detector before bending.
• Do not mount your unit behind wipers, ornaments, mir-
rored sunscreens, etc. These obstructions have metal sur-
faces which can affect radar and laser signals and reduce crit-
ical warning time. (Regular tinted glass does not affect recep-
tion.)
• Some windshields have an Instaclear™ or Electriclear™ type
coating, which affect radar signals. Consult your dealer or the
owner’s manual supplied with your vehicle to determine if
your windshield has this coating.
• Avoid placing unit in direct contact with windshield.
• To reduce the possibility of theft, conceal your unit when
not in use.
Dash Mounting
• Make sure the mounting location you have chosen is
relatively level and is clean and dry. Clean with isopropyl
alcohol if necessary to remove any waxes or polishes.
• Separate the fastener strips. Peel the paper backing off
each strip and adhere one piece to the dash and the other
piece to the bottom of the unit, taking care not to cover
the serial number.
Windshield Mounting
• Install the two suction cups and rubber bumper onto the
bracket by fitting them into their holes.
• Press the suction cups onto the windshield at the location
you have chosen. IMPORTANT: Some newer cars have a
plastic safety coating on the inside of the windshield. The
suction cups may leave permanent marks on this type of
surface. To find out if your vehicle has this type of wind-
shield, check the owner’s manual or ask your dealer. We
recommend that you do not leave the suction cup brack-
et on the window in direct sunlight. If the detector is
removed, this may cause blistering of the dash in some
vehicles.
Be careful not to place the fastener strip over the unit’s serial number. If the
fastener strip is removed, the serial number may be pulled off the unit. Units
without serial numbers are not covered under warranty.
• Slide the detector onto the bracket until it locks into place.
• If necessary, the unit may be leveled by bending the wind-
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 11
INSTALLATION
OPERATION
Visor Mounting (optional accessory)
Power On And Self-Test
• Slide the visor bracket into the bracket mounting slot.
• Clip the visor bracket onto the visor making sure it is
relatively level and has a clear view of the road.
Each time your Whistler detector is turned on, an auto-
matic self-test sequence confirms that the speaker and
visual displays are functional.
• Press
(Power) or apply Power. Display reads:
Slide on view
Insert into bracket mounting slot. Do not bend this
section of bracket.
Power Connection
• Plug the small end of the power cord into the unit’s power
jack.
• Plug the large end into the vehicle’s cigarette lighter.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2
amp 3AG fuse located behind the silver tip. To replace the
fuse, carefully unscrew the tip of the plug. (IMPORTANT:
Unscrew slowly. The tip contains a spring which may fly out
when disassembling.) Insert the new fuse with the spring and
screw on the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
Self-test Mute
Simply press the Quite/Record button during the self-test
sequence to cancel the self-test audio. This will not effect
radar/laser alerts. To restore the self-test audio, simply
press the Quiet/Record button during the next self-test.
Integrated Real Voice
When selected, Real Voice will be used to articulate the
following:
1.Band Identification
2.Safety Warning System messages
3.Feature Selection
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp
fuse.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 13
OPERATION
OPERATION
Memory/Beep Confirmation
Auto Quiet Mode
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one
beep confirms feature “on”, two beeps confirm feature
“off”.
Auto Quiet reduces the selected audio level to a level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20 sec-
onds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
Audio Level Adjustment
The audio levels can be adjusted high to low, or low to
high, in seven steps:
• Press
Quiet/Record (before a signal is detected) to
engage Auto Quiet. Unit will beep once.
• Once the Auto Quiet mode is engaged, you may cancel
• Press Volume
up to increase audio level.
the audio alarm by pressing
Quiet/Record.
• Press Volume down to decrease audio level.
• Press Quiet/Record (when the unit is not alarming) to
As audio level is adjusted, beeps are provided and the dis-
play indicates volume level. Example:
cancel Auto Quiet mode. Unit will beep twice.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, approximately 2 beeps
are provided on any new alert and unit then remains quiet.
• Press
• Press
Quiet/Record to cancel the audio.
Quiet/Record a second time during an alert to
restore the standard audio alert pattern; or turn the unit
off, then on.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 15
OPERATION
OPERATION
City/City 1/City 2 Mode
Dim/Dark Mode
Whistler’s Three Stage City Mode is designed to reduce the
annoyance of automatic door openers, intrusion alarms and
other devices which share frequencies with police radar.
• Press City to engage City. Display reads:
Dim/Dark Mode reduces the illumination of the display.
• Press and hold (Power/Play) for 2 seconds to reduce illu-
mination to a Dim setting.
• Pressing City a second time engages City 1. Display reads:
• Pressing City a third time engages City 2. Display reads:
• Pressing and holding
engages Dark Mode.
for 2 seconds a second time
Dim or dark can be engaged during an alert. In Dark Mode,
the display goes dark for as long as a signal is being detect-
ed and for 20 seconds after, then the display returns to the
dimmer setting.
• Pressing and holding
tion to the display.
• Pressing City a fourth time cancels City, City 1, and City 2.
Display reads:
a third time restores full illumina-
Engaging/Disengaging VG-2
See option select mode to turn this feature on.
In City Mode, weak speed/safety radar signals give an initial
alarm of two beeps, and then the unit remains quiet unless
the signal becomes very strong. When the signal strength
increases, two additional beeps are provided. In City 1
Mode, only the X band sensitivity is lowered. In City 2 Mode,
X-band is not detected. CAUTION: Some towns/small cities
may still be using X band radar.
If Auto Quiet is engaged in City 1 or City 2 modes and the
unit receives a strong radar signal, the unit performs the Auto
Quiet feature. City Modes do not change the audio alert for
laser or VG-2.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 17
OPERATION
OPERATION
Option Select Mode
Stay Alert Feature
Entering Option Select Mode allows you to turn on or off
VG-2 detection or Voice alerts. Note: The unit must not
be alarming.
The Stay Alert Feature is designed to test a driver’s alert-
ness. To engage (when unit is not alarming):
• Press and hold City for 2 seconds. Display shows:
To turn VG-2 detection on/off:
Blinking
Press and hold the Quiet button until the unit provides a
unique beep then release the Quiet button. Unit will say
“VG-2” and the V/L light will illuminate briefly. If VG-2
detection is already on, the unit will provide a double beep
to indicate VG-2 detection is turned off.
Within 30-60 seconds two beeps are sounded; to show alert-
ness, the driver must press either the
(Volume), City or
(Quiet) button within 3-5 seconds. If the button is pressed
within 3-5 seconds, the cycle is repeated.
If a button was not pressed within 3-5 seconds alarm sounds
and the display will flash all LEDs:
To turn Voice off/on:
Press and hold the Quiet button (greater than 3 seconds)
until you hear a double beep then release the Quiet
button. Voice alert is now off. If voice alert was already off,
the unit will say “ON”.
• Press
(Power) to exit.
WARNING!!!Stay Alert is NOT intended as a substitute for
adequate rest. You should NOT operate a vehicle if you are
drowsy. During extended periods of vehicle operation, you
should take frequent breaks. Improper reliance on the Stay
Alert feature may result in vehicle damage, personal injury or
death.NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
Press
(Power/Play) anytime to exit.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and
release.
(Quiet/Record) simultaneously and
• Press
(Power/Play) to exit.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 19
OPERATION
OPERATION
Memo Mode
• Press and release the
a recording. Note: Recording starts as soon as the button
is released. Display shows:
(Quiet/Record) button to begin
Record up to 3 distinct message tracks for a total of 45
seconds, one 45 second message or any combination in
between.
IMPORTANT: Unit does not detect radar or laser signals
during recording or while playing a memo.
WARNING!!! Memo mode is not intended to be used
while you are driving. You should not use any device in a
vehicle that may distract you from observing the road
ahead.
Blinking
If the recording time expires for a track, the unit will auto-
matically switch to the next track. Press and release
(Quiet/Record) again to stop recording. The unit will
automatically stop recording once track 3 is completed.
To play a message:
• Enter Memo mode and press
recorded messages.
To record or play a message (Memo mode):
• Press (Volume Up) and
ultaneously and release. The unit will beep twice while
flashing the X & V/L icons; this enters Memo mode. Display
shows:
(Power/Play) to listen to
(Volume Down) buttons sim-
•
To play a selected track, press (Volume Up) or
(Volume Down) button until selected track appears on
the display. Display shows:
II = Track 2
Selected
• Press the
(Power/Play) button.
Messages are kept in memory and are not affected by
resetting the factory features. See “Reset Features” sec-
tion of the manual.
To delete a message:
•
Enter Memo mode and press
(Volume Up) or
(Volume Down) button until selected track appears on
the display.
• Press the
(Quiet/Record) button twice.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 21
OPERATION
RADAR ALERTS
Speed Radar Audio/Visual Alerts
To exit Memo mode:
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
• Press (Volume Up) or (Volume Down) buttons simul-
taneously and release. The unit will beep twice.
NOTE: Memo mode automatically exits within 20 seconds
if a button is not pressed.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off
your detector within 6 hours if you forget to turn it off. The
timer is reset if the detector is turned off, unplugged or
any button is pressed before the 6 hours have expired. The
detector will alert you with an audible and visual warning
before it shuts off. Display shows:
I = weak signal, III = strong signal
Pulse Protection®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display shows:
Blinking
Blinking
During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.
After 3 seconds standard alert pattern continues.
If the unit has automatically turned itself off, press the
(Power/Play) button to turn the unit back on. You can
manually engage the Vehicle Battery Saver Mode by press-
ing and holding the City button until one beep is heard.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 23
SAFETY RADAR ALERTS
LASER/VG-2 ALERTS
Laser Audio/Visual Alerts
In communities where transmitters are located, the Safety
Warning System alerts you with 60 voice messages.
When Safety Radar is detected the audio alert is geiger
counter-like.
When a laser signal is detected V/L and signal strength is
displayed, the audio alert is continuous for a minimum of 3
seconds. Example:
Example:
The more “|||” the closer the laser source.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
it will detect the VG-2 Gun.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
Note: Not all areas have Safety Warning System™ transmitters.
Visit
the
Safety Warning
System™ web
page
at
Blinking
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an “all clear” condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
(Reference page 27 for VG-2 information.)
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 25
RESET FEATURES
CARE & MAINTENANCE
Care And Maintenance
Reset Features
During the summer months, avoid prolonged exposure to
direct sunlight by removing your unit from the dash when
your vehicle is parked for an extended period of time.
Do not spray water, cleaners or polishes directly onto the
unit. The spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive cleaners on
the unit’s exterior.
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Press and hold
(Power) and
(Quiet).
• Plug Power Cord into unit.
• Wait for 2 beeps.
• Release
and . Unit is now reset.
1. Audio to level (4).
2. Highway Mode ON.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Voice ON.
7. Unit ON or OFF.
NOTE: Reset feature procedure does not erase messages
in Memo mode.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 27
TROUBLESHOOTING GUIDE
ARE DETECTORS LEGAL?
In Most States YES!
Your Whistler detector is expertly engineered and designed
to exacting quality standards to provide you with reliable,
trouble-free operation. If your unit has been correctly installed
following the guidelines in this manual, but is not operating
optimally, please refer to the troubleshooting guide below.
Laser detectors are completely legal in every state when
used in automobiles or light trucks (under 10,000 lbs.).
Similarly, when used in automobiles or light trucks, radar
detectors are legal in almost every state. Exceptions are
Virginia and Washington, D.C., which have local regulations
restricting the use of radar receivers in any vehicle.
PROBLEM: No display or audio.
•
Check fuse in Whistler plug; replace if necessary with a
2 amp 3AG type.
Concerning trucks over 10,000 lbs., the Federal Highway
Administration (FHwA) issued
•
•
Check fuse for lighter socket; replace if necessary.
Make sure lighter socket is clean.
a
regulation, effective
January, 1994 which prohibits radar and laser detector use
in these types of vehicles nationally.
Prior to the FHwA regulation, laws existed in the state of
New York restricting the use of radar detectors in trucks
over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.
PROBLEM:Unit alarms when vehicle hits bumps.
•
•
Check for loose lighter socket; tighten and clean.
Check connections at both ends of power cord. Substitute
another cord to determine if cord is defective. Return
defective cord to the factory.
PROBLEM: Unit alarms when using vehicle equipment, electrical
accessories (brakes, power mirrors/windows, directionals, horn,
etc.), or when accelerating.
Radar Facts
A radar gun operates by transmitting radio waves at certain
frequencies which reflect off objects and are then picked up
by the radar gun’s receiving section. When a radar beam
reflects off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles per hour
to determine your vehicle’s speed.
Currently, the FCC (Federal Communications Commission)
permits operation of traffic radar guns at X Band (10.500 -
10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band
(33.400 - 36.000 GHz).
•
Vehicle’s electrical system, including battery and alternator,
may have electrical noise. Install a filter capacitor (470mfd.
25 volt or larger capacitance value) on the back of the
lighter socket.
PROBLEM: Audio alerts are not loud enough.
•
•
Cancel Auto Quiet Mode or City Mode.
Check audio level setting (see page 10 & 11).
PROBLEM: No X band signals.
Cancel City 2.
PROBLEM: Unit gives laser alert when accelerating.
•
•
Possible bad or low quality distributor cap. Replace with high qual-
ity cap.
Note: A radar detector will not alarm if an officer is not
transmitting on any one of the above radar bands.
If difficulties occur which cannot be solved by information in
this Troubleshooting Guide, please call Whistler Consumer
Relations at 1-800-531-0004 before returning your unit for
service.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 29
SPEED MONITORING TECHNOLOGIES
SPEED MONITORING TECHNOLOGIES
Laser Facts
Other Speed Detection Systems
It’s well documented that many radar guns cannot reliably
provide the speed of a targeted vehicle that is traveling in a
group of vehicles. In contrast, a laser gun can target a spe-
cific vehicle out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of target identifi-
cation is the result of the laser gun’s narrow beam. A radar
transmission can cover more than a four-lane highway at a
distance of 1,000 feet, compared with a laser transmission
which covers about 6 feet at the same distance.
Several techniques other than radar or laser are used to
measure vehicle speeds. When these methods are being
used, no detector can provide a warning. These techniques
include:
• Pacing - A patrol car drives behind you and matches your
driving speed.
• Vascar/Aircraft - The time it takes a vehicle to travel a
known distance is measured.
For best protection, keep these points in mind:
Radar Detector Detectors (VG-2)
•
•
•
Because your vehicle’s license plate or headlights are the laser gun’s
primary targets, mounting your Whistler detector on the dashboard can
improve laser detection at short range.
Do not follow closely behind any vehicle you cannot see through. If you
can’t see past a vehicle ahead of you, chances are your detector won’t
either.
The Interceptor VG-2, or simply VG-2, is a microwave receiv-
er used by police to detect signals radiated by the local oscil-
lator of a radar detector. Because its purpose is to identify
persons driving with radar detectors, the VG-2 is known as a
“radar detector detector”.
The VG-2 is the primary tool used by the police to identify
radar detector equipped vehicles. If caught, in a state where
detectors are illegal, (see page 25), drivers risk losing their
radar detector and receiving a fine. In addition, instant-on
radar is almost always used in combination with a VG-2, leav-
ing unsuspecting motorists vulnerable to receiving two tick-
ets — one potentially for speeding, the other for possession
of a detector.
The receiving range of your laser detector will not be the same as a radar
detector. Laser guns are most often used at short range.
Whistler Laser/Radar detectors receive all current laser guns
which operate at a laser wavelength of 905 +/- 10mm.
• Pro Laser™ I II III
• LT1 20-20
• Ultra Lyte
Having a radar detector capable of detecting the VG-2 may
alert you to the presence of a speed trap.
For more information on speed monitoring technologies,
please visit our FAQ page on our website:
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 31
WARRANTY INFORMATION
WARRANTY INFORMATION
Consumer Warranty
IMPORTANT: Whistler will not assume responsibility for loss or
damage incurred in shipping. Therefore, please ship your unit
insured with return receipt requested. COD’s will not be accept-
ed!
This Whistler Radar/Laser detector is warranted to the original
purchaser for a period of one year from the date of original
purchase against all defects in materials and workmanship.
This limite d warranty is void if the unit is abused, mod i-
fied , installe d improperly, if the housing has bee n
removed, or if the se rial numb er is missing. There are no
express warranties covering this product other than those set
forth in this warranty. All express or implied warranties for this
product are limited to one year. Whistler is not liable for
damages arising from the use, misuse, or operation of this
product.
2. Include with your unit the following information, clearly printed:
• Your name and street address (for shipping via UPS),
a daytime telephone number, (No P.O. Box please.) and email
address (if applicable).
• A detailed description of the problem (e.g., “Unit per
forms self-test but does not respond to radar”).
• A copy of yourdated store receipt or bill of sale.
3. Be certain your unit is returned with its serial number. For
reference, please write your unit’s serialnumberin the following
space: s/n __________________.
Service Under Warranty
During the warranty period, defective units will be repaired or
replaced (with the same or a comparable model), at Whistler’s
option, without charge to the purchaser when returned pre-
paid, with dated store receipt to the address below. Units
returned without dated proof of purchase will be handled as
described in section “Service Out Of Warranty.” Due to the
specialized equipment necessary for testing a radar/laser
receiver, there are no authorized service stations for Whistler
brand detectors other than the factory.
Units without serial numbers are not covered under warranty.
IMPORTANT: To validate that your unit is within the warranty
period,make sureyoukeepacopyofyourdated store receipt. Youmay
register your warranty online at www.whistlerogurp.com, however, for
warantyverification purposes, a copyofyour dated store receipt must
accompanyanyunit sent in for warrantywork.
When returning a unit for service under warranty, please
follow these instructions:
1. Ship the unit in the original carton or in a suitable sturdy
equivalent, fully insured, with return receipt requested to:
Whistler Repair Dept.
1201 North Dixieland Rd
Rogers, AR. 72756
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 33
WARRANTY INFORMATION
SPECIFICATIONS
Service Out Of Warranty
Units will be repaired at “out of warranty” service rates when:
• The unit’s original warranty has expired.
• Dimensions: 1.35"H x 2.95"W x 4.6"L
• Weight: 6.0 oz.
• Dated store receipt is not supplied.
• The unit has been returned without its serial number.
• The unit has been abused, modified, installed improperly,
or had its housing removed.
• Laser Wavelength:
905 ± 50 nanometers (nm)
The minimum out of warranty service fee for your Whistler
detector is $55.00 (U.S.). If you require out of warranty serv-
ice, please return your unit as outlined in the section
“Service Under Warranty” along with a certified check or
money order for $55.00. Payment may also be made by
MasterCard, American Express or VISA; personal checks
are not accepted. In the event repairs cannot be covered by
the minimum $55.00 service fee, you will be contacted by a
Whistler technical service specialist who will outline options
available to yo u. If you elect not to have your unit
repaired/replaced, it will be returned to you along with your
certified check or money order.
• Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
• Operating Temperature Range:
-20˚ C to +80˚ C (-4˚ F to +176˚ F)
• Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
IMPORTANT: When returning your unit for service, be cer-
tain to include a daytime telephone number and email
address (if applicable).
One or more U.S. patents apply: #5,146,227; #5,379,456;
#5,666,120, and #5,990,821.
Specifications are subject to change without notice.
Consumer Relations
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Consumer Relations at
1-800-531-0004. Representatives are available to answer your
questions Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
1670LD manual 4/11/02 11:48 AM Page 35
ACCESSORY ORDER FORM
ACCESSORIES
The following accessories can be ordered directly from
Whistler by calling 1-800-531-0004 or visit our online store
at www.whistlergroup.com
PLEASE SHIP TO:
Name______________________________________________
Street______________________________________________
City________________________State_______Zip_________
Telephone Number (______) __________________________
Order
Code
Description
Price
202138
202140
206294
Visor Bracket
$ 6.95
$ 9.95
$ 7.95
Order Code/Description Quantity Total Price
$
Windshield Bracket Kit
*Modular Lighter Plug
(Requires 206550 or
206551)
206550
206551
*Modular Straight
Power Cord (5')
(Requires 206294)
*Modular Coiled
$
6.95
Subtotal
Sales Tax (if Applicable)
$ 7.95
Shipping and Handling*
Total Enclosed
$
$
5.00
Power Cord (7')
(Requires 206294)
Straight Power Cord (5’)
Coiled Power Cord (7’)
Hook & Loop
Hardwire Kit (10' )
(for wiring to fuse box)
Socket Multiplier
206552
206553
206879
206880
$ 14.95
$ 15.95
$ 1.95
$ 9.95
SEND ORDER FORM WITH CERTIFIED CHECK OR
MONEY ORDER TO:
Whistler CTS
PO Box 1844
Bentonville, AR 72712
203283
206666
159032
$ 9.95
$ 17.95
IF PAYING BY MASTERCARD,VISA OR AMERICAN
EXPRESS PLEASE PROVIDE:
Type of Card ___MasterCard ___Visa ___American Express
Name on Card______________________________________
Card Number_______________________________________
Expiration Date_____________________________________
Cardholder Signature________________________________
(Requires 206550 or 206551)
Modular cord package
(includes 206550, 206551, 206294)
Package of 8 suction cups $ 2.95
*Modular: interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00
*For expedited shipping costs, contact Whistler Customer Service, 1-800-531-0004
Prices are subject to change without notice.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|