ADP6000WH/ADP6000IX
Download from Www.Somanuals.com. All Manuals Search And Download.
Under certain conditions, Hydrogen gas may be produced in a hot-water system that has not been used for two
weeks or more. HYDROGEN GAS IS EXPLOSIVE.If the hot-water system has not been used for such a period,
before using the dishwasher turn on all hot-water faucets and let the water flow from each for several minutes.
This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame
during this time.
This appliance must be grounded. In the event
of a malfunction or breakdown, grounding will
„
„
reduce the risk of electric shock by providing a
path of least resistance of electric current. This
appliance is equipped with a cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate
outlet that is installed and grounded in accordance
with all local codes and ordinances.
„
„
„
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not touch the heating element during or
immediately after use.
„
Keep children away from detergent and rinse aid, keep
children away from the open door of the dishwasher,
there could still be some detergent left inside.
Young children should be supervised to ensure that
they do not play with the appliance.
The appliance is not intended for use by young
children or infirm persons without supervision.
Dishwasher detergents are strongly alkaline,they
can be extremely dangerous if swallowed.Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.
The door should not be left in the open position
since this could present a tripping hazards.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.
„
„
„
„
„
Do not place any heavy objects of stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;
2) Load sharp knives with the handles up to reduce
the risk of cut-type injuries.
3) Warning:Knives and other utensils with sharp points
must be loaded in the basket with their points down
or placed in a horizontal position.
When using your dishwasher, you should prevent
plastic item from contacting with heating element.
Check that the detergent receptable is empty after
completion of the wash cycle.
„
„
Remove the door to the washing compartment when
removing an old dishwasher from service or discarding it.
Please dispose of packing materials properly.
Use the dishwasher only for its intended function.
During installation, the power supply must not
be excessively or dangerously bent or flattened.
„
„
„
„
„
„
„
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent. For plastic
„
„
Do not tamper with controls.
items n
ot so marked, check the manufacturer's
The appliance is to be connected to the water mains
using new hose sets and that old hose-sets should
not be reused.
recommendations.
„
„
Use only detergent and rinse additives designed
for an automatic dishwasher. Never use soap,
laundry detergent, or hand washing detergent
in your dishwasher. Keep these products out of
the reach of children.
Other means for disconnection from the supply must
be incorprated in the fixed wiring with at least 3mm
contact separation in all poles.
„
The maximum number of place settings to be washed
is 12.
„
„
The maximum permissible inlet water pressure is 1Mpa.
The minimum permissible inlet water pressure is 0.04Mpa.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
To get the best performance from your dishwasher,read all operating instructions before using it for the
first time.
2
1
5
3
6
4
9
8
7
6
1
Door Lock: Pull it to open the door.
7
8
2
Delayed Start Button: Press this button to set the delayed
hours for washing. You can delay the start of washing up
to 12 hours. One press on this button delays the start of
washing by half an hour.
4
5
9
Start / Pause button: Press this button to start or pause the
dishwasher.
6
1
2
3
7
8
4
5
11
10
9
Drain pipe connector
Inlet pipe connector
1
2
3
Upper Basket
Spray Arms
4
5
6
7
8
10
11
Main Filter
Silverware Basket
Detergent Dispenser
Cup Shelf
Coarse Filter
Rinse Aid Dispenser
Lower Basket
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishes that have
been sitting with dried food on
them for a while.
Pre-wash
Pre-wash 50℃
wash 60℃
Rinse 70℃.
5/22 g.
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
Pre-wash
Pre-wash
wash 50℃
Rinse 70℃.
5/25 g.
22 g.
(IEC-EN 50242)
For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.
Pre-wash
wash 45℃
Rinse 60℃.
For dishes that need to rinsed
and dried only
Wash 45℃
Rinse 70℃
A shorter wash for lightly
soiled loads that do not need
drying.
Pre-wash
wash 40℃
Rinse 70℃
15 g.
Pre-wash of dishes pots and
pans while waiting for the
load to be completed after the
subsequent meal.
Pre-wash
Draw out the lower and upper baskets, load the dishwares and push
them back. It is commended that loading the lower basket first, then
1
the upper one. The expensive and finer chinaware should not be put in.
Turn off the appliance to cancel the current programme.
2
(the current programme can be always cancelled by this way)
Then turn on the appliance and press the programme
button to select the desired programme.
Press the start button to start washing.
3
4
5
6
Turn on the water supply to full pressure
The alarm will sound for 8 seconds.
Open the door of your dishwasher and switch your
dishwasher off using the on/off key.
According to the soil level to choose the desired program by
pressing program selection button.
Wait a few minutes before unloading the dishwasher to
avoid handling the dishes and utensils while they are
still hot and more susceptible to breakage.
Press start/pause button to start a washing.
7
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The dispenser must be refilled before the start of each wash cycle following the instructions provided in the" Wash Cycle
Table".Your dishwashers use less detergent and rinse aid than conventional dishwashers. Generally, only one tablespoon of
detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just
before starting dishwasher, otherwise it could get damp and will not dissolve properly.
THE NORMAL DOSAGE PLEASE REFERENCE TO THE SECTION ENTITLED "WASH CYCLE TABLE"
Main wash
detergent
Pre-wash
detergent
To remove hard water spots, try the following:
Run dishes through a normal wash program.
Remove all metal dishware, such as cutlery, pans, etc.,
from the dishwasher.
Do not add detergent.
Pour two cups of vinegar into a bowl and set the bowl face
25
15
up on the lower rack of the dishwasher.
Run the dishes through a normal wash program.
If this doesn't work, try the same process with 1 / 4 cup of
citric acid crystals instead of vinegar.
Use only detergent specifically made for use in dishwashers.
Keep your detergent fresh and dry. Don't put powder detergent
into the dispenser until You're ready to wash dishes.
Dishwasher detergent is corrosive! Take care to keep it out
of reach of children.
The rinse aid is released during the final rinse to prevent water
from forming droplets on your dishes that can leave spots and
streaks. It also improves drying by allowing water to "sheet" off
the dishes.
Your dishwashers are designed to use liquid rinse aids. The
rinse aid dispenser is located inside the door next to the
detergent dispenser. To fill the dispenser, open the cap and
pour the rinse aid into the dispenser until the level indicator
turns completely black. The volume of the rinse aid container is
about 140ml.
15
25
To open the dispenser, turn the cap to the "open" (left)
arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to
overfill.
Be careful not to overfill the dispenser, because this could
cause oversudsing. Wipe away any spills with a damp cloth.
Don't forget to replace the cap before you close the dishwasher
door.
Replace the cap by inserting it aligned with "open" arrow
and turning it to the closed (right) arrow.
If you have soft water, you may not need rinse aid for it may
cause a white film to develop on your dishes.
A measured amount of rinse aid is released during the final rinse. As with detergent, the amount
of rinse aid needed for your dishes depends on the hardness of the water in your area. Too much
rinse aid can result in lather of foaming and cause cloudiness or steaks on your dishes. If the
water in your area is very soft, you may not need rinse aid. If you do,you can dilute the rinse aid
with an equal amount of water.
The rinse aid dispenser has four settings. Always start with the dispenser set on " 1 ". If spots and
poor drying are problems, increase the amount of rinse aid dispensed by removing the dispenser
lid and rotating the dial to "2". If the dishes still are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-free. We suggest you to set on "3" .
4
Download from Www.Somanuals.com. All Manuals Search And Download.
As the rinse aid diminishes, the size of the black dot on the rinse
aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well
as plates, small bowls and shallow pans(as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.
The upper rack can be adjusted for height by putting wheels of different height into the rails.
Cups
1
Saucers
2
2
Dessert dishes
3
4
3
4
We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,
serving dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the
top spray arm.
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom rack feature fold down tine rows so that larger or more pots and pans can be loaded.
Dessert dishes
Dinner plates
9
Soup plates
10
Silverware basket
10
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Silverware should be placed in the silverware basket with handles at the bottom: If the rack has side baskets, the spoon should
be loaded individually into the appropriate slots, Especially long utensils should be placed in the horizontal position at the
front of the upper rack.
5
Knife
Forks
1
2
3
4
5
5
5
2
2
3 2
4
4 1
4 1
3
3
1
Soup spoons
Dessert spoons
Teaspoons
3
3
5
5
5
3
2
4 1
4
4
1
1
2
2
3
3
3
3
5
5
5
2
2
2
1
1
1
4
4
4
3
3
5
5
5
2
2
2
4
4
4
1
1
1
Do not let any item extend through bottom.
Running sign: Repeatedly display the sign in
turn when running, no flicker when stopping.
Digital sign: Display the delayed time,
remaining time and fault codes.
Delay sign: Display the sign when delaying.
Temperature display: Display the wash
temperature at any time.
Wash sign: Display the sign when washing.
Faucets is not opened.
The installation position of the drain pipe is too high.
Malfunction of temperature sensor or of heating element.
Too much inlet water. .
Short circuit or break of temperature sensor.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub. There are three
components of the filtering system: the main filter, the coarse filter, and the fine filter.
1
Main filter
Food and soil particles trapped by this filter are pulverized by a special jet on the lower spray
arm and washed down the drain.
Coarse filter
2
Larger items, such as pieces of bone or glass, that could clog the drain are trapped in the
coarse filter. To remove an item caught in this filter, gently squeeze the tabs on top of this
filter and lift it out.
3
Fine filter
This filter holds soil and food residue in the sump area and prevents it from being
redeposited on the dishes during a cycle.
ATTENTION: Do not put the fine filter upside down.
If your dishwasher is left in an unheated place during the winter, ask a service technician to:
Reconnect the water inlet pipe to the
water valve.
4
5
1
Cut off electrical power to the dishwasher.
2
Turn off the water supply and disconnect the water
inlet pipe from the water valve.
Remove the filter in the tub the bottom
and use a sponge to soak up water
in sump.
Drain water from the inlet pipe and water valve.
(Use a pan to catch the water.)
3
It is necessary to clean the spray arms regularly for hard water chemicals will clog the
spray arm jets and bearings. To remove the spray arm, screw off the nut to take out the
washer on top of the spray arm and remove the arm. Wash the arms in soapy and warm
water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.
Filter assembly
For best performance and results, the filter assembly must be cleaned.
The filter efficiently removes food particles from the wash water, allowing it to be
recirculated during the cycle. For this reason, it is a good idea to remove the larger
food particles trapped in the filter after each wash cycle by rinsing the semicircular
filter and cup under running water. To remove the filter assembly, pull on the cup
handle in the upward direction. The entire filter assembly should be cleaned
once a week.
To clean the coarse filter and the fine filter, use a cleaning brush. Then, reassemble
the filter parts as shown in the figures left and reinsert the entire assembly in the
dishwasher, positioning in its seat and pressing downward.
The dishwasher must never be used without the filters. Improper replacement of the
filter may reduce the performance level of the appliance and damage dishes and utensils.
Never run the dishwasher without the filters in place.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on the surface.
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed
to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming
within the appliance.
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
If the appliance must be moved, try to keep it in the vertical
position.If absolutely necessary, it can be positioned on
its back.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Rather, use only a cloth and warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water and a little
white vinegar, or a cleaning product made specifically
for dishwashers.
One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Please see the rating lable to know the rating voltage and connect the dishwasher to appropriate power supply,Use required fuse
12 amp. Fused electrical supply is required-copper wire only. Time delay fuse or circuit breaker recommended and provide
separate circuit serving only this appliance. Outlet should be placed in adjacent cabinet.
After making sure that the voltage and the frequency values for the current in the home
correspond to those on the rating plate and that the electrical system is sized for the
maximum voltage on the rating plate, insert the plug into an electrical socket which is
earthed properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket,rather than using a adaptors or the like as
they could cause overheating and burns.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is
fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear and free of impurities. If this precaution is not taken,
there is a risk that the water inlet can get blocked and damage the appliance.
The water supply to the appliance can also be connected to the house hot water line
(centralized system, heating system),as long as it does not exceed a temperature of 60 C.
In this case, the wash cycle time will be shortened by about 15 minutes and the wash
efficiency slightly reduced.
The connection must be made to the hot water line following the same procedures as those
for the connection to the cold water line.
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent
cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to
facilitate proper installation.
Insert the drain hose into a drain pipe with a minimum diameter of 40 mm, or let it run into the sink, making sure to avoid bending
or crimping it. Use the special plastic support that comes with the appliance. The free end of the hose must be at a height
between 400 and 1000mm and must not be immersed in water.
If the sink is 1000 higher from the floor, the excess water in hoses cannot
be drained directly into the sink. It will be necessary to drain excess
water from hoses into a bowl or suitable container that is held outside and lower
than the sink.
DIMENSIONS(mm)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
'
Fuse blown, or the
circuit breaker acted
Replace fuse or reset circuit breaker. Remove any other
appliances sharing the same circuit with the dishwasher
Power supply is not
turned on
Make sure the dishwasher is turned on and the door is
closed securely.
Make sure the power cord is properly plugged into the
wall socket.
Water pressure is low
Overflow
Check that the water supply is connected properly and
the water is turned on.
The system is designed to detect an overflow. When it
does, it shuts off the circulation pump and turns on the
drain pump.
'
Some audible sounds are
normal
Sound from soft food shredding action and detergent cup
opening.
To ensure everything is secured in the dishwasher.
Utensils are not secure
in the baskets or something
small has dropped into
the basket
Motor hums
Dishwasher has not been used regularly. If you do not use it
often, remember to set it to fill and pump out every week,
which will help keep the seal moist.
Improper detergent
Use only the special dishwasher detergent to avoid suds.
If this occurs, open the dishwasher and let suds evaporate.
Add 1 gallon of cold water to the tub. Close and latch the
dishwasher, then drain out the water by slowly turning the
Dial until a drain period is reached. Repeat if necessary.
Spilled rinse agent
Always wipe up rinse agent
spills immediately.
Detergent with
Make sure that the detergent is the one without colorant.
colorant was used
Rinse agent dispenser
is empty
Make sure that the rinse agent dispense is filled.
Improper program
Select stronger program
Improper rack loading
Make sure that the action of the detergent dispenser and
spray arms are not blocked by large dishware.
•
Extremely hard water
Low inlet
•
To remove spots from glassware:
Take out all metal utensils out of the dishwasher.
Do not add detergent.
temperature
Choose the longest cycle.
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Start the dishwasher and allow it to run for about
18 to 22 minutes, then it will be in the main wash.
Open the door to pour 2 cups of white vinegar
into the bottom of the dishwasher.
Close the door and let the dishwasher complete
the cycle. If the vinegar does not work: Repeat
as above, except use 1/4 cup (60 ml)of citric acid
crystals instead of vinegar.
Empty rinse agent
dispenser
Incorrect dosage of
detergent
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Combination of soft
water and too much
detergent
Use less detergent if you have soft water and select a
shortest cycle to wash the glassware and to get them clean.
Tea or coffee stains
using a solution of 1/2 cup of bleach and 3 cups warm water
to remove the stains by hand.
You have to wait for 20 minutes after a cycle to let the heating
elements cool down before cleaning interior; otherwise, burns
will happen.
Iron deposits in water
can cause an overall film
You have to call a water softener company for a special filter.
Hard water minerals
To clean the interior, use a damp sponge with dishwasher
detergent and wear rubber gloves. Never use any other cleaner
than dishwasher detergent for the risk of foaming or suds.
Dial is not in the OFF
position
Turn the Dial to OFF position and slide the door latch to the
left.
'
Dishes block detergent
cups
Re-loading the dishes properly.
Normal phenomenon
There is some steam coming through the vent by the door
latch during drying and water draining.
Aluminum utensils have
rubbed against dishes
Use a mild abrasive cleaner to eliminate those marks.
This is normal
A small amount of clean water around the outlet on
the tub bottom at the back of the tub keeps the water
seal lubricated.
Overfill dispenser or rinse
aid spills
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead
to overflowing. Wipe away any spills with a damp cloth.
Make sure the dishwasher is level.
'
Dishwasher isn t level
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|