Home
Appliances
Installation,
UseAndCare
G
U
I
D
E
A Note To You................ 2
Air Conditioner
Safety.............................. 3
Parts And Features........ 4
Electrical
Requirements................. 5
Installing Your
Air Conditioner .............. 8
Operating Your
Air Conditioner ............ 13
Caring For Your
Air Conditioner ............ 15
Troubleshooting .......... 19
Requesting
Assistance
Or Service..................... 20
Warranty ....................... 24
SLIDER/CASEMENT WINDOW AIR CONDITIONERS
PART NO. 23-11-2112N-004/1183829 Rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
Air Conditioner Safety
IMPORTANT
Your safety and the safety
of others are very important.
SAFETY
We have provided many important safety
messages in this manual and on your
INSTRUCTIONS
WARNING — To reduce the risk of fire,
electrical shock, injury, or sickness when
using your air conditioner, follow these
basic precautions:
appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential
hazards that can kill or hurt you
and others.
All safety messages will follow the safety
alert symbol and either the word
“DANGER” or “WARNING”. These words
mean:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Unplug air conditioner before servicing.
• Use two or more people to move or
install air conditioner.
DANGER
You can be killed or seriously injured
if you don’t immediately follow
instructions.
• Do not drink water collected inside the
cabinet.
— SAVE THESE INSTRUCTIONS —
WARNING
Help us help you
You can be killed or seriously injured
if you don’t follow instructions.
Please:
• Install your air conditioner in a window that
will hold the weight, and secure the air
conditioner according to the Installation
Instructions.
All safety messages will tell you what the
potential hazard is, tell you how to reduce
the chance of injury, and tell you what
can happen if the instructions are not
followed.
• Connect the air conditioner to the proper
kind of outlet with the correct electrical
supply and ground. (See the Installation
Instructions.)
• Make sure the air conditioner is the correct
size for the area you want to cool.
• Use the air conditioner only to do what a
window air conditioner is designed to do.
• Make sure the air conditioner is not used
by anyone unable to operate it properly.
• Maintain the air conditioner properly.
Also, remove the Energy Label. Use a damp
cloth to take off any glue residue. DO NOT
use sharp instruments, flammable fluids, or
abrasive cleaners. These can damage the
air conditioner finish.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts And Features
This section contains captioned illustrations of your appliance. Use them to become familiar
with where all parts and features are located and what they look like. To help you find
information on specific parts or features quickly, page references are included.
Model and serial
number plate
(behind air louvers)
STAT
THERMOSTAT
Control panel
ONTROL
C
N
FAN CONTROL
(pp. 13, 14)
EXHAUST VENT
PEN
OPEN
SED
LO
CLOSED
Removable
front panel
(p. 15)
Removable
air filter
(behind panel)
Control Panel
OFF
4
FAN CONTROL
3
EXHAUST
THERMOSTAT
5
LOW
FAN
HIGH
FAN
CLOSED
OPEN
2
6
TURBO
COOL
LOW
COOL
7
1
COLDER
HIGH
COOL
WAIT THREE MINUTES BEFORE RESTARTING
Thermostat
control
Fan
control
Exhaust vent
control
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Requirements
Below are electrical plug variations; choose the one which matches the ampere rating of your
unit. Your model’s ampere rating is printed on the model and serial number label, attached to
the unit, behind the front panel. (See diagram on page 4.)
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
If codes permit and a separate ground
wire is used, it is recommended that a
qualified electrician determine that the
ground path is adequate.
Check with a qualified electrician if you are
not sure the air conditioner is properly
grounded.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL REQUIREMENTS
PLUG TYPE
ELECTRICAL REQUIREMENTS
SEE PAGE
3-prong
ground plug
115-volt models with amperes
up through 7.5
6
3-prong
ground-
type outlet
Ground
prong
Power supply cord
3-prong
ground plug
3-prong
ground-
type outlet
For 115-volt models with amperes
from 7.6 to 12.0
7
Ground
prong
Power supply cord
115-volt models with amperes up
through 7.5
Outlet wiring
Electrical requirements
Outlet wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local
governing codes and ordinances.
A 115-volt (103.5 min., 126.5 max.), 60-Hz,
AC-only, 15-ampere fused electrical supply
is required (time delay fuse or time delay
circuit breaker required). It is required that a
separate circuit, serving only this air
conditioner, be provided.
Electrical connection
Electrical ground is required on this air
conditioner.
Recommended ground method
3-prong
ground
plug
For your personal safety, this air conditioner
must be grounded. This air conditioner is
equipped with a power supply cord
having a 3-prong ground plug. To minimize
possible shock hazard, the cord must be
plugged into a mating 3-prong ground-type
outlet, grounded in accordance with the
National Electrical Code (ANSI/NFPA 70 –
latest edition) and local codes and
ordinances. If a mating outlet is not
available, it is the responsibility of the
customer to have a properly grounded
3-prong outlet installed by a qualified
electrician.
3-prong
ground-type
outlet
Ground
prong
Power
supply
cord
(double outlet)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL REQUIREMENTS
115-volt models with amperes from 7.6
through 12.0
Outlet wiring
Electrical requirements
Outlet wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local
governing codes and ordinances.
A 115-volt (103.5 min., 126.5 max.), 60-Hz,
AC-only, 15-ampere fused electrical supply
is required (time delay fuse or time delay
circuit breaker required). It is required that a
separate circuit, serving only this air condi-
tioner, be provided.
Electrical connection
Electrical ground is required on this air
conditioner.
3-prong
ground
plug
Recommended ground method
For your personal safety, this air conditioner
must be grounded. This air conditioner is
equipped with a power supply cord
having a 3-prong ground plug. To minimize
possible shock hazard, the cord must be
plugged into a mating 3-prong ground-type
outlet, grounded in accordance with the
National Electrical Code (ANSI/NFPA 70 –
latest edition) and local codes and
ordinances. If a mating outlet is not
available, it is the responsibility of the
customer to have a properly grounded
3-prong outlet installed by a qualified
electrician.
Ground
prong
3-prong
ground-type
outlet
Power
supply
cord
(single outlet)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Your Air
Conditioner
Preparing for installation
Tools required
• Flat-head screwdriver
• Carpenter’s level
• Tape measure
WARNING
Excessive Weight Hazard
Use two or more people to move and
install air conditioner.
• Electric or hand drill
1
• ⁄8-inch drill bit
Failure to do so can result in back
or other injury.
• Pencil
• Awl
• Knife
Installation tips
1. Choose a proper size window.
• 151⁄2 inches minimum width
• 22 inches minimum height
• 36 inches maximum height
▲
151⁄2 inches
minimum
width
NOTE: The height measurement must be
of an unobstructed opening above the
mounting platform. In some cases, due to
a variety of stop and track arrangements,
the above dimensions may vary slightly.
22 inches
minimum
height
36 inches
maximum
height
▲
2. Choose the proper window location.
Choose a window that will allow the
cooled air to flow freely and directly into
the room(s) you want to cool. Remember,
it is difficult to move air around corners.
Also, choose a window that is within
6 feet of an electrical outlet. (See
“Electrical requirements” on pages 5-7 for
receptacle and wiring needs.) Do not
use an extension cord.
6-foot
power cord
reach
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR AIR CONDITIONER
Installing in a sliding window
NOTE: This air conditioner must be installed
according to all applicable codes and
ordinances.
1. Choose the installation site. The window
frame and side of the structure must be
able to support at least 110 lbs. of weight.
2. Remove one sliding sash from the
window frame.
7⁄16" long
machine
screws
3. Loosely attach the support angle to the
bottom of the support platform using two
7⁄16" long machine screws, flat washers,
and nuts.
Support
platform
Flat
washers
Sill plate
Support angle
Nuts
Leveling bolt
Locknut
Self-tapping screw
4. Place the support platform against the
lower window track and firmly against the
vertical edge of the window frame.
Support platform
5. Attach the support platform to the window
stool using two self-tapping screws.
Tighten screws securely.
Self-
tapping
screw
Window stool
Lower window
track
continued on next page
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR AIR CONDITIONER
Support
platform
Two 7⁄16" long
machine screws
6. Pull the support angle against the outside
of the structure. Tighten two 7⁄16" long
machine screws on top of the support
platform.
Window
stool
Lower
window track
7. Adjust the leveling bolt to position the
support angle in a level plane. This will
allow for proper angle. Tighten the
Outside
wall
leveling bolt locknut. The air conditioner
must be tilted back slightly to facilitate
proper condensate disposal.
Support
angle
NOTES: Be sure the window track is
securely attached to the building con-
struction. Use longer screws into the
subframing if necessary.
Leveling bolt
lock nut
Do not drill a hole in the bottom pan.
The air conditioner is designed to operate
with approximately 1⁄2" of water in the
bottom pan.
Leveling bolt
Top retainer
Filler panel
8. Cut two pieces of adhesive back foam
seal equal to the height of the window
opening. Remove backing and apply to
the vertical inside edges of the window
frame and sliding sash that will rest
against the air conditioner.
Foam seal
9. Replace the sliding sash in the
window frame.
Sliders
Foam seal
10
Channel
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR AIR CONDITIONER
10. Slide the air conditioner onto the support
platform. Be sure the unit side channel
butts against the vertical edge of the
window frame. Watch out for the sharp
metal fins on the front and rear coils.
WARNING
Excessive Weight Hazard
Use two or more people to move and
install air conditioner.
NOTE: If unit side channel does not fit
securely, remove air conditioner and
readjust leveling bolt.
Failure to do so can result in back or
other injury.
11. Using the existing clearance holes in the
air conditioner’s bottom bar as guides,
drill two 1⁄8" holes through the window
channel frame. Install two self-threading
screws through the clearance holes and
into these holes. Tighten the screws
securely. The air conditioner should be
firmly anchored to the window channel
frame. Be sure your air conditioner does
not fall out during installation.
Drilled holes
Bottom
bar
Screw
12. Slide the inside window sash closed.
Make sure the vertical edge of the inside
window sash is pressed firmly against the
side of the unit cabinet. Cut remaining
adhesive back foam seal equal to the
width of the window opening. Remove the
backing and apply to the top inside edge
of the window frame.
Support platform
Window channel frame
Channel
13. Install the speed clips on the top and
bottom inside edges of the window to
provide locking.
Speed clip
14. Insert the appropriate plastic foam seal
between the inside window sash and the
outside window.
15. Place the top retainer on the top edge
of the filler panel. Then place the bottom
edge of the filler panel into the groove of
the bottom retainer which is mounted on
the air conditioner. The filler panel may
be trimmed with a knife or scissors to fit
the window height.
16. Slide the sliders upward making sure the
filler panel aligns in the sliders.
17. With the sliders up against the top re-
tainer, drill 1⁄8" hole through the window
frame using the existing clearance hole
in the slider as a guide. Install the self-
threading screw in the hole and tighten
securely. Repeat for the other slider.
18. Check all seals and plug all air leaks
around the air conditioner with a suitable
weather-proof sealing compound.
Foam seal
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR AIR CONDITIONER
Installing in a casement window
Since styles and sizes of casement windows
vary widely, it is advisable to have the air
conditioner installed by someone skilled in
this type of installation. Your appliance
dealer can recommend or supply qualified
people to install your air conditioner.
1. Closed or stationary windows: Install
unit in stationary sash to avoid crank
handles or window latches. If unit is to be
installed in or next to a movable sash, it
may be necessary to remove catch,
handle, or both. Remove crank handle
and secure window in closed position.
Remove glass panes and horizontal
mountings to a height sufficient to
mount unit.
3. A filler panel will be required at the side of
the air conditioner when installed in win-
dows having width greater than 151⁄2".
Filler panel should be made from 3⁄4" thick
wood securely anchored to one side of
the opening so that a 151⁄2" wide opening
is provided. The filler panel should run the
full length of the window. Paint to suit.
4. Install the air conditioner in the same
manner as described for sliding
windows.(See “Installing in a sliding
window” on page 9.)
2. Open window frame: Remove crank
mechanism and catch handles. Fold the
window sash back against the exterior
wall of the building and secure, or
remove completely where possible.
Do not block air circulation to the
outside louvers.
Installing in a wood sliding or wood
casement window
3. Install the air conditioner into the frame
1. For a wood casement window, it is
necessary to construct a frame, using at
least 1" thick wood with a 151⁄2" wide
opening.
following procedures for metal sliding and
casement windows. (See “Installing in a
sliding window” on page 9.)
2. Paint the frame and fasten it securely,
sealing it into the window opening.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR AIR CONDITIONER
Operating Your Air
Conditioner
In order to obtain the best possible results from your air conditioner, it is important that you
operate it properly. This section will tell you how to do just that.
Starting your air conditioner
OFF
4
FAN CONTROL
3
EXHAUST
THERMOSTAT
5
LOW
FAN
HIGH
FAN
CLOSED
OPEN
2
6
TURBO
COOL
LOW
COOL
7
1
COLDER
HIGH
COOL
WAIT THREE MINUTES BEFORE RESTARTING
3. Turn the Thermostat Control to the
desired setting. You can adjust the air
conditioner’s cooling performance by
turning the Thermostat Control clockwise
for more cooling or counterclockwise for
less cooling. You will need to experiment
to find the setting which suits you best.
4. To turn the air conditioner off, or in the
event of a power interruption, turn Fan
Control to OFF.
1. Set Exhaust Vent Control to CLOSED
for maximum cooling performance.
2. Set Fan Control to the desired setting.
HIGH FAN ............ for maximum room air
circulation when no cooling is desired
TURBO COOL............. for fastest cooling
HIGH COOL ............... for normal cooling
LOW COOL ............ for minimum cooling
LOW FAN .............. for minimum room air
NOTE: If you turn your air conditioner off or
if the compressor turns off when lowering
the Thermostat Control, wait at least
circulation when no cooling is desired
three minutes before turning it back on.
Doing this keeps the air conditioner from
blowing a fuse or tripping a circuit breaker.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR AIR CONDITIONER
Using the exhaust vent control
The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust room air:
1. Set Exhaust Vent Control to OPEN.
EXHAUST
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to High
Fan or Low Fan.
CLOSED
OPEN
3. Set Thermostat Control to desired setting.
To circulate room air:
1. Set Exhaust Vent Control to CLOSED.
EXHAUST
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to High
Fan or Low Fan.
CLOSED
OPEN
3. Set Thermostat Control to desired setting.
NOTE: For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room
air circulation is desired.
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the
cooled air. Move the levers in the direction
you want the air to go (right or left).
Lever for left/right airflow
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring ForYour Air
Conditioner
Proper maintenance of your air conditioner will help ensure longer life and lower operating
costs. This section will tell you how to clean your air conditioner and perform annual
maintenance. You can always call your designated Whirlpoolservicing dealer for an annual
checkup.
Cleaning the front panel
1. Unplug air conditioner or disconnect
power.
2. Grasp both sides of the front panel and
pull forward. The front panel will pivot
forward to reveal the air filter.
3. Remove the air filter from the tabs and
clean it separately. (See “Cleaning the air
filter” on page 16.)
4. Clean front panel with warm water, mild
soap or detergent, and a soft cloth. Rinse
and dry thoroughly.
5. Wipe control panel clean with a soft,
dry cloth.
6. Replace air filter.
Front panel
7. Replace the front panel.
8. Plug in air conditioner or reconnect
power.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CARING FOR YOUR AIR CONDITIONER
Cleaning the air filter
The filter may be cleaned. A clean filter
helps remove dust, lint, and other particles
from the air. Check every two weeks to see
if filter needs cleaning.
Filter
1. Turn Fan Control to OFF.
2. Grasp both sides of the inlet grille and pull
forward. The front panel will pivot forward
to reveal the air filter.
3. Remove the air filter from the tabs.
4. Carefully wash the air filter with a mild
detergent and warm water. Rinse with
clear water, squeeze dry, and replace.
5. Replace the front panel.
6. Return Fan Control to the desired setting.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CARING FOR YOUR AIR CONDITIONER
Annual maintenance
OR
WARNING
If you are familiar with electrical appliances,
you can do the cleaning and maintenance
yourself. If you choose to do so, follow these
steps:
1. Unplug air conditioner or disconnect
power.
2. Remove the air conditioner from the
window channel frame and off of the
support platform.
Electrical Shock Hazard
3. Remove the front panel. (See page 15.)
Disconnect power before doing any
maintenance.
4. Remove the screws from the top and
sides of the cabinet, and then remove the
cabinet.
5. Wrap the motor, electrical control box,
and compressor terminal box in plastic
film to make sure no water or other liquid
gets inside. Water or other liquids could
damage the insulation and cause serious
mechanical problems.
Do not drink water collected by the air
conditioner.
Failure to follow these instructions
can result in death, electrical shock,
or sickness.
WARNING
6. Clean and hose out the base, coils, and
condensate pan. Clean at least once a
year, or more often if the condenser coils
and pan collect dirt, sand, leaves, insects,
or algae. Also, clean if you detect an odor
coming from the air conditioner. Do not
use the water collected in the air condi-
tioner for drinking purposes. It is not
sanitary.
Excessive Weight Hazard
Use two or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
Your air conditioner needs annual
maintenance to help ensure steady, top
performance throughout the year.
Call the service company recommended
by your dealer to:
• Inspect and clean the coils and conden-
sate water passages.
• Check fan and fan motor.
7. Remove the plastic film from the motor
and electrical parts.
8. Reattach the cabinet with the screws.
Replace the front panel, and reinstall the
air conditioner.
9. Plug in air conditioner or reconnect
power.
The compressor is sealed and needs no
oiling. The expense of an annual inspection
is the customer’s responsibility.
NOTE: It is a good idea to wait 24 hours
before starting the air conditioner again. This
allows time for all areas to dry out. The
water from rainfall or from normal operation
does not harm these components.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CARING FOR YOUR AIR CONDITIONER
Understanding normal operating sounds
When your air conditioner is operating
normally, you will hear sounds such as:
• Droplets of water hitting the condenser,
causing a “pinging” or “clicking” sound.
Water droplets help to cool the condenser.
• Air movement from the fan, especially on
high fan speed settings.
• Clicks from the thermostat cycle.
Sounds also may be caused by house
construction – such as vibration of the unit
due to wall construction or unsteady window
mounting area.
Saving energy
You can help save energy by following the
tips below.
• Improve your home’s insulation. Seal all
doors and windows. Close the
fireplace flue.
• Close all blinds and drapes on sunny sides
of the house. Add window awnings.
• Keep the air filter clean.
• Do not block the airflow with drapes or
furniture.
• Ventilate the attic. High temperatures in
the attic add to the air conditioner’s
cooling load.
• Try not to use heat-producing appliances
during the hottest part of the day.
• Turn off lights and appliances when they
are not needed.
• Keep heat registers and cool-air
returns closed.
• Use exhaust venting fans when cooking,
doing laundry, or bathing.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Listed in the chart below are the most common problems consumers run into with their air
conditioners. Please read through this chart before calling for service. It could save you the
cost of a service call.
PROBLEM
CHECK THE FOLLOWING
Air conditioner
won’t run
Is the air conditioner plugged into a live circuit with proper
voltage?
Has the time-delay fuse blown or circuit breaker tripped?
Is the Fan Control set to OFF?
Is the Thermostat Control set correctly?
Has the local power failed?
Air conditioner
blows fuses or
trips circuit
breaker
Are time-delay fuses being used?
Is an extension cord being used? Do not use an extension
cord with this or any other appliance.
Are you waiting three minutes before trying to restart the air
conditioner?
Air conditioner
turns on and off
OR
does not cool the
room
Is the air filter clean?
Are the inside evaporator coils and the outside condenser
coils clean?
Is there excessive moisture or heat in the room (open container
cooking, showers, etc.)?
Is the Fan Control set too low?
Is the Thermostat Control set too low?
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Requesting Assistance
or Service
Before calling for assistance or service, please check “Troubleshooting” on page 19. It may
save you the cost of a service call. If you still need help, follow the instructions below.
1. If you need assistance* …
2. If you need service* …
Call the Whirlpool Customer Interaction
Centertelephonenumber.Dial
toll-free from anywhere in the
U.S.A.:
Whirlpool has a nationwide network of
designated Whirlpool service
companies. Whirlpool desig-
nated service technicians are
trained to fulfill the product
warranty and provide after-
1-800-253-1301
and talk with one of our trained
consultants. The consultant can instruct you
in how to obtain satisfactory operation from
your appliance or, if service is necessary,
recommend a designated service company
in your area.
warranty service, anywhere in the United
States. To locate the designated Whirlpool
service company in your area, call our
Consumer Assistance Center telephone
number (see Step 1) or look in your tele-
phone directory Yellow Pages under:
If you prefer, write to:
•APPLIANCE-HOUSEHOLD-
MAJOR, SERVICE & REPAIR
• WASHING MACHINES &
DRYERS, SERVICE & REPAIR
Whirlpool Corporation
Customer Interaction Center
553 Benson Road
- See: Whirlpool Appliances or
Authorized Whirlpool Service
(Example: XYZ Service Co.)
- See: Whirlpool Appliances or
Authorized Whirlpool Service
(Example: XYZ Service Co.)
Benton Harbor, MI 49022-2692
3. If you need FSP®
replacement parts …
Please include a daytime phone number in
your correspondence.
FSP is a registered trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your WHIRLPOOL®
appliance. FSP replacement parts will fit
right and work right, because they are made
to the same exacting specifications used to
build every new WHIRLPOOL appliance.
To locate FSP replacement parts in your
area, refer to Step 2 or call the Whirlpool
Consumer Assistance Center number in
Step 1.
* When asking for help or service:
Please provide a detailed description of the problem, your appliance’s complete model
and serial numbers, and the purchase date. (See page 2.) This information will help us
respond properly to your request.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
This index is alphabetical. Look for the word or phrase you are interested in, then look for the
page number.
TOPIC
PAGE
AIRFLOW
Directing................................................ 14
CLEANING
Air filter.................................................. 16
Front panel............................................ 15
ELECTRICAL REQUIREMENTS ....... 5, 6, 7
ENERGY
Saving ................................................... 18
FEATURES/PARTS ................................... 4
INSTALLATION
Sliding window ............................ 9, 10, 11
Casement window................................. 12
Wood sliding/wood casement window .. 12
MAINTENANCE
Annual, performing................................ 17
OPERATING AIR
CONDITIONER .................................. 13, 14
PARTS/FEATURES ................................... 4
SAFETY ..................................................... 3
SERVICE
Parts ..................................................... 20
Requesting............................................ 20
TROUBLESHOOTING ............................. 19
WARRANTY............................................. 24
23
Download from Www.Somanuals.com. All Manuals Search And Download.
®
WHIRLPOOL
Room Air Conditioner
Warranty
WHIRLPOOL WILL PAY FOR
LENGTH OF WARRANTY
FULL ONE-YEAR
WARRANTY FROM
DATE OF PURCHASE
Replacement parts and repair labor to correct defects in
materials or workmanship. Service must be provided by a
Whirlpool-designated service company.
FULL FIVE-YEAR
WARRANTY FROM
Replacement parts and repair labor to correct defects in materials or
workmanship in the sealed refrigeration system. These parts are:
DATE OF PURCHASE
2ND THROUGH 5TH YEAR
1. Compressor
2. Evaporator
3. Condenser
4. Drier-Strainer
5. Connecting Tubing
Service must be provided by a designated service company.
WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your air conditioner.
2. Instruct you how to use your air conditioner.
3. Replace house fuses or correct house wiring.
4. Clean or replace the air filter.
B. Pickup and delivery. Your air conditioner is designed to be repaired in the home.
C. Damage to your air conditioner caused by accident, misuse, fire, flood, acts of God, or use of
products not mentioned in the Use and Care Guide.
D. The removal and reinstallation of your air conditioner if it is installed in an overhead or other
inaccessible location or is not installed in accordance with published installation instructions.
E. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
F. Replacement parts or repair labor costs for units operated outside the United States.
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so this exclusion or limitation may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Outside the United States a different warranty may apply. For details, please contact your
authorized dealer.
If you need service, first see the “Troubleshooting” section of this book. After checking
“Troubleshooting,” additional help can be found by checking the “Requesting Assistance or Service”
section, or by calling the Whirlpool Customer Interaction Center telephone number, 1-800-253-1301,
from anywhere in the U.S.A.
Retain for future reference.
PART NO. 23-11-2112N-004/1183829 Rev. A
© 2000 Whirlpool Corporation
12/00
Printed in U.S.A.
® Registered Trademark of Whirlpool, U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|