PROFESSIONAL SOUND SYSTEMS
Series
OPERATING MANUAL AND USER GUIDE
Titan™ 8 Passive
Titan™ 12 Passive
Titan™ 15 Passive
Titan™ 8 Active
Titan™ 12 Active
Titan™ 15 Active
Titan™ Sub A12
Titan™ Sub A15
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Wall Mounting Titan Speaker System
WPB-1 Wall Mounting Bracket (Titan™ 12 / 15)
WHARFEDALE PRO LIMITED WARRANTY
Wharfedale Pro Titan™ Series speakers are warranted of manufacturing or material defects for a
period of one year from the original date of purchase. In the event of malfunction, contact your
authorized Wharfedale Pro dealer or distributor for information.
*Be aware that warranty details may differ from country to country. Contact your dealers or
distributor for information. These terms do not infringe your statutory rights.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
TABLE OF CONTENTS
1……………………………..Important Warnings & Safety Instructions
2……………………………..Important Safety Information Powered Products
4……………………………..What about the Titan™ Series?
5……………………….…….Introduction/Overview
6……………………….…….Features
7……………………………..Setting up/ Speaker Placement
7……………….…………….Connections/ Wiring - Passive
8……………….…………….Rear Panel Layout - Passive
8……………….…………….Connection Diagram Passive
12……………….…………….Rear Panel Layout - Active
15…………..……………..….Connection Diagram Active
16…………..……………..….Rear Panel Layout - Sub A12
17……………….…………….Connection Diagram Sub A12
19……………….…………….Rear Panel Layout - Sub A15
20……………….…………….Connection Diagram Sub A15
22……………………….…….Specifications - Titan™ Passive
23……………………….…….Specifications - Titan™ Active
25……………………….…….Specifications - Titan™ Subwoofers
26……………………………..Dimensional Drawings - Titan™ 8/ 12
27…………..…………………Dimensional Drawings - Titan™ 15/ 8A
28…………..…………………Dimensional Drawings - Titan™ 12A / 15A
29…………..…………………Dimensional Drawings - Titan™ Sub A12/A15
30…………………………..…Wall Mounting Titan Speaker System
30…………………………..…Warranty
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
DIMENSIONS
12.28"
312mm
21.88"
556mm
O
M
I
X
_
--
O
P
TIMI E
Z
R
B
R
O
)
O
(
B
A
L
A
N
C
E
D)
(
B
A
L
A
N
CD)
E
A
A
IN
P
U
T
O
U
T
P
U
T
15.11"
384mm
12.28"
312mm
7.1"
180mm
15.83”
402mm
27.87”
708mm
18.81”
478mm
15.83”
402mm
28
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
TITAN™ SERIES OVERVIEW
The Titan™ Series are powerful, accurate, high quality loudspeaker systems with low
distortion that were designed to deliver high quality sound for the best value. From the
Titan™ 8 (passive) to the Titan™ 15 Active models plus two powered subs, you have what it
takes to assemble the system that your music deserves.
An important factor in loudspeakers is the smoothness of the sound coverage. Many
speakers that may sound acceptable in the horizontal plane have problems in the vertical
plane. Due to an integral high frequency Elliptical Wave Guide (EWG), the Titan™ speakers
exhibit very smooth and well behaved sound dispersion characteristics in both the horizontal
and vertical planes making positioning and set-up less critical. Everyone in the room will
hear the same quality sound.
The Titan™ Active Series has many features to allow you greater flexibility in your sound:
“BRO™ ” Bass Response Optimizer circuit, when engaged, allows for enhanced low
frequency response at lower volume levels. This is very similar to a loudness switch on your
home stereo amplifier.
Starting with the Titan™ 12 Active speaker, two-band EQ (equalization) is added. These
tone controls provide +/-10dB in each frequency range.
Sometimes, in live performance, it is not easy to know if your speakers are working or not;
they may be ahead of you when performing or they are not so close to you. To remedy this
problem, there is a POWER ‘ON’ indicator LED on the back panel as well as in the throat of
the horn to give you a visual indication that there is power to the speaker. There is also a
LIMIT indicator LED on the back panel. The LIMIT LED illuminates when the signal limiter is
actively limiting the level of the signal to prevent distortion and overload.
The Titan™ Series rugged cabinet features moulded in handles, feet, cord wrap and cable
anchors moulded into the lightweight Polypropylene cabinet. It also accommodates a bottom
mounted OmniMount® 60.0 bracket for wall mounting.
To make installation easier and safe, mounting and hanging brackets are available. The
diagrams at the end of this manual have rigging / hanging suggestions to get the most out
of your system.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
DIMENSIONS
8.7”
221mm
15.59"
396mm
10.47”
266mm
8.7”
221mm
12.28”
312mm
21.89”
556mm
15.11”
384mm
12.28”
312mm
26
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
SETTING UP/ SPEAKER PLACEMENT
The uniform dispersion of the Titan™ Series makes it easy to place the speakers where you
need them, rather than trying to rearrange the room to accommodate the sound system. For
the best coverage and highest quality sound, the speakers should be located above head
level. Mounting hardware (M6/M8) and an integral tripod stand socket make installation
easy and safe. The Titan™ Series accommodates a bottom mounted OmniMount® 60.0
(Titan™ 12, 15) and OmniMount® 30.0 (Titan™ 8) bracket and has optional rigging /
hanging brackets.
Before turning on the Titan™ Series, or any powered loudspeaker, be sure that the power
switch is in the off position, volume controls are all the way down (at 0 level) and all audio
connections are made.
After power-up, speak into your mic or start the CD or MP3 player or other line level device
and slowly increase the volume to the desired level. Always remember that a speaker will
do what you tell it to do (i.e. deliver sound to the audience), but if the audience is too large
and your system too small, you will not achieve the desired sound level without a lot of
distortion. Avoid distortion as it can damage your speakers in the long term. If you cannot
achieve the desired SPL, you must add more speakers or a subwoofer to the system.
CONNECTIONS/ WIRING
Titan™ 8 / Titan™ 12 / Titan™ 15 Passive
Connecting the Titan™ Series to your system is easy. The rear panels include NL4 and 1/4”
phone connectors in parallel. Run your speaker wires from your amplifier to the speaker.
You can use either input connector. Use the correct gauge of speaker cable according to
the power handling ability of your Titan™ Series cabinet. Use stranded insulated cable for
speaker runs. It is always advisable to use heavier gauge (lower number) cables on longer
runs. Be sure to connect your speakers in proper polarity (what many refer to erroneously,
as phase). This means that in normal operation; connect one end of the same wire to the
Red terminal on the amplifier and the other end to the + (tip) connector on the speaker.
Black is always the ground or common.
Although the location of the speakers is not often critical to your sound, there are some
guidelines to follow, especially with powered speakers, to make the sound the best it can
be.
• Try to plug the amplifiers (a/k/a powered speakers) into a circuit that does not have light
dimmers or refrigerators on it. When these devices are in the circuit , it is almost certain
you will get a 50Hz hum in your system that cannot be removed with a EQ.
• Make sure the speakers are above head level to make the projection of the sound as
good as it can be. Keep the speakers out of the corner of the room. Place them away from
boundaries and the microphones. Do not place them too far apart.
• When using the hanging bracket or another apparatus, use a cable safety line attached to
the speaker and a solid part of the wall - not the bracket. If the bracket fails, the speaker
will not fall down.
• If the speakers will be hanging above the audience, it often is a good idea to turn the
speakers upside down and aim the horn 2/3 of the way back in the room.This will provide
good coverage of the audience.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
SPECIFICATIONS - Titan™ ACTIVE (Con't)
Titan™ 12 ACTIVE
Titan™ 15 ACTIVE
Titan™ 8 ACTIVE
Inputs
Input A – type
Switchable balanced mic or line
level input
Switchable balanced mic or line
level input
Switchable balanced mic or line
level input
Input Sensitivity
Mic: -36dBu (-38.2dBv or
12.28mVrms)
Mic: -36dBu (-38.2dBv or
12.28mVrms)
Mic: -36dBu (-38.2dBv or
12.28mVrms)
Line: +4dBu (1.78dBv or
1.228Vrms)
Line: +4dBu (1.78dBv or
1.228Vrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level
Input Connector
+22dBu
+22dBu
+22dBu
XLR - 1/4” Combo jack
XLR - 1/4” Combo jack
XLR - 1/4” Combo jack
Balanced: 20k ohms
Input Impedance
Balanced: 20k ohms Unbalanced: Balanced: 20k ohms Unbalanced:
10k ohms
10k ohms
Maximum Input Level
Input B – type
+22dBu
+22dBu
+22dBu
Line level input
Line level input
XLR - 1/4” Combo jack: 1.78dBv XLR - 1/4” Combo jack: 1.78dBv
or 1.228Vrms
RCA: 0dBu (-2.2dBv or
0.775Vrms)
or 1.228Vrms
RCA: 0dBu (-2.2dBv or
0.775Vrms)
Input Sensitivity
Maximum Input Level
Input Connectors
+22dBu
+22dBu
Combo jack: 1/4" - XLR / Summed Combo jack: 1/4" - XLR /
dual RCA jacks Summed dual RCA jacks
Line Output
Line Output Connector
Switchable LOOP / MIX Balanced Switchable LOOP / MIX Balanced
Male XLR Male XLR
Balanced: 1k ohm Unbalanced: Balanced: 1k ohm Unbalanced:
Impedance:
500 ohm
500 ohm
Sensitivity
+4dBu (1.78dBv or 1.228Vrms)
+4dBu (1.78dBv or 1.228Vrms)
AC Power details
Power Supply
High Efficiency Switching Mode
High Efficiency Switching Mode
High Efficiency Switching Mode
Power Supply
Power Supply
Power Supply
AC Power Options
AC100~120V / 220~240V, 50 /
AC100~120V / 220~240V, 50 /
AC100~120V / 220~240V, 50 /
60Hz
60Hz
LED
60Hz
LED
Power On Indicator
Rigging / Bracket / Mounting
Options
LED
10 M8 threaded inserts including 10 M8 threaded inserts including
4 M8 threaded 4 M8 threaded
inserts on bottom in OmniMount inserts on bottom in OmniMount
8 M6 threaded inserts including 4
M6 threaded
inserts on bottom in OmniMount
30.0-type footprint
60.0-type footprint
Pole-mount receptacle with lock
screw
60.0-type footprint
Pole-mount receptacle with lock
screw
Pole-mount receptacle with lock
screw
2 carry handles (one on each
side)
2 carry handles (one on each
side)
1 carry handles ( on each side)
Optional wall-mount bracket
Optional wall-mount bracket
Optional wall-mount bracket
Injection Moulded Polypropylene
Grey or white or black
396 x 266 x 221
Enclosure Material
Colours
Injection Moulded Polypropylene Injection Moulded Polypropylene
Grey or white or black
556 x 384 x 312
Grey or white or black
708.3 x 477.8 x 401.8
27.9" x 18.8" x 15.8
23.94kg / 52.67lbs
26.94kg / 59.27lbs
Dimensions H x W x D (mm)
Dimensions H x W x D (in)
Net Weight (kg / lbs)
Gross Weight (kg / lbs)
21.9 x 15.1 x 12.3
12.8kg / 28.16lbs
14.8kg / 32.56lbs
15.6 x 10.5 x 8.7
5.7kg / 12.54lbs
7.70kg /16.94lbs
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
CONNECTION DIAGRAM # 2
Titan™ 8/12/15 MONO SYSTEM
WITH TWO MONITORS
CONNECTING MULTIPLE
Titan™ 8/12/15 SPEAKERS TOGETHER
IN A MONO-MAIN AND STAGE
MONITOR CONFIGURATION USING A
SINGLE, DUAL CHANNEL AMPLIFIER
MAIN SPEAKERS
STAGE MONITORS
4 OHM
LOAD
4 OHM
LOAD
Right
Left
OUTPUT OF STEREO POWER
AMPLIFIER OR POWERED MIXER
NOTEꢀꢁ7KLVꢁFRQ¿JXUDWLRQꢁUHSUHVHQWVꢁDꢁꢂꢁRKPꢁORDGꢁWRꢁHDFKꢁRXWSXWꢁFKDQQHOꢁRIꢁWKHꢁDPSOL¿HUꢃꢁ
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
SPECIFICATIONS - Titan™ PASSIVE SERIES
Titan™ 12
12" 2-way
55 - 20kHz
98dB
Titan™ 15
Titan™ 8
8" 2-way
70 - 20kHz
96dB
Loudspeaker Type:
Frequency Response (+/–3dB):
Sensitivity (1W@1M):
Peak SPL:
15" 2-way
50 - 20kHz
97dB
128dB
129dB
124dB
HF Coverage (H x V):
System Impedance:
POWER (WATTS)
Continuous:
ꢂꢀꢁÝꢂ[ꢂꢃꢁÝ
8 ohm
ꢂꢀꢁÝꢂ[ꢂꢃꢁÝ
8 ohm
ꢀꢁÝꢂ[ꢂꢃꢁÝ
8 ohm
250W
500
400W
800W
1600W
150W
300W
600W
Music:
Peak:
1000
LF DRIVER
Size:
305mm/ 12"
64.26mm / 2.5"
Compression Driver
44mm/1.75"
25mm/1"
381mm/ 15"
75mm / 3.0"
Compression Driver
51mm/ 2.0"
25mm/1"
203mm/ 8"
38.86mm / 1.53"
Compression Driver
25mm/1"
Coil Size:
HF DRIVER/ HORN
Coil Size:
Exit Size:
30mm/1.2"
Cloth
Diaphragm Material:
HF Driver Protection:
Long-Throw EQ Compensation:
Titanium
Titanium
DTF™ Dynamic Thermal Filament DTF™ Dynamic Thermal Filament
Bulb
3dB boost (long-throw) / Flat
(near-field)
N/A
N/A
EWG™ - Elliptical Waveguide
Horn Type:
EWG™ - Elliptical Waveguide
25mm/1"
Throat Size:
25mm/1"
25mm/1"
CROSSOVER
Type/Frequency/Filter:
ENCLOSURE
2-way 2.2KHz / Linkwitz-Riley
2-way 1.8KHz / Linkwitz-Riley
2-way 2.4KHz / Linkwitz-Riley
Shape/ Material:
Rigging:
Trapezoidal/ Polypropylene
Trapezoidal/ Polypropylene
Trapezoidal/ Polypropylene
(8) M6 threaded rigging points
+ (4) M6 threaded rigging points
on bottom in Omnimount®
30.0-type footprint + Speaker pole-
mount receptacle with lock screw
+ 1 built-in carry handle + Optional
wall-mount bracket + Optional
dual-unit array speaker stand
hardware
(10) M8 threaded rigging points
(10) M8 threaded rigging points
+ (4) M8 threaded rigging points + (4) M8 threaded rigging points
on bottom in Omnimount®
60.0-type footprint + Speaker
pole-mount receptacle with lock
screw + Optional wall-mount
bracket + Optional dual-unit
array speaker stand hardware
on bottom in Omnimount®
60.0-type footprint + Speaker
pole-mount receptacle with lock
screw + Optional wall-mount
bracket + Optional dual unit
array speaker stand hardware
COLOURS
Grey or Black or White
2 x 1/4" jacks + 2 x NL4
Grey or Black or White
2 x 1/4" jacks + 2 x NL4
Grey or Black or White
2 x 1/4" jacks + 2 x NL4
OUTPUT CONNECTORS
DIMENSIONS/WEIGHTS
Weight:
12kg / 26.4lbs
22kg / 48.4lbs
5.5kg / 12.1lbs
Dimensions (H x W x D):
556 x 384 x 312mm/
21.88" x 15.1" x 12.3"
708.3 x 477.8 x 401.77mm/
27.9" x 18.8" x 15.8
396 x 266 x 221mm/
15.59" x 10.47" x 8.7"
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
CONNECTION DIAGRAM # 4
USING THE Titan™ 8/12/15
WITH A PASSIVE SUBWOOFER
TITAN™ 8/12/15 INPUT
AMPLIFIER OUTPUTS
INPUT:
+1 Positive
-1 Negative
OUTPUT
A
OUTPUT
B
PARALLEL INPUTS
WWW.WHARFEDALEPRO.COM
Hi-Pass Output to
Titan™ 8/12/15
PASSIVE SUBWOOFER INPUT
PASSIVE SUBWOOFER
HI-PASS OUTPUT
P
A
R
ALLEL
U
H
O
I-PA
MID
S
/
S
O
UTP
U
T
INP TS
(T
HI SPEAKE
R
)
CONNECTION DIAGRAM # 5
USING THE Titan™ 8/12/15 IN A
BI-AMP SYSTEM
MIXER OUTPUT
ELECTRONIC CROSSOVER
Low Frequency Crossover Output
High Frequency Crossover Output
Low Frequency Amplifier Input
High Frequency Amplifier Input
OUTPUT
A
OUTPUT
B
OUTPUT
A
OUTPUT
B
Low Frequency Amplifier Output
Subwoofer
High Frequency Amplifier Ou tput
Titan™ 8/12/15
INPUT:
+1 Positive
-1 Negative
PARALLEL INPUTS
P
AR
INP
A
U
LLEL
TS
H
(TO
I-PASS
O
U
TPU
T
M
ID / HI SPEAKE R)
WWW.WHARFEDALEPRO.COM
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
CONNECTION DIAGRAM # 1
TWO CHANNEL SYSTEM WITH
HIGHPASS OUTPUT
TO LEFT ACTIVE SPEAKER
OR AMPLIFIER INPUT
TO RIGHT ACTIVE SPEAKER
OR AMPLIFIER INPUT
OUTT
INPUT
(B
A
L
A
N
C
E
D
)
(B
A
L
A
)
0
A
WWW.WHARFEDALEPRO.COM
_
+
VOLUME
Left
Output
THRU /
CAUTION
ELEC TRIC SHO CK
R
ISK
O
D
F
O
HIGHPASS
switch in
!
NO
T
O
PEN
THRU
(100Hz)
0
WARNING: SHOCK HAZARD DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE -NE PAS OUVRIR
PHA
“HIGHPASS”
(down) mode
HIGHPASS
SPEAKER
LEVEL IN
N 2082
LIMIT
Right
Output
B
ON
(B
A
L
A
N
CE
D
)
(B
A
L
A
N
CE D )
OFF
OUTPUT
INPUT
AC 220-240V~50Hz 400W
FUSE T4AL250V
POWER
MIXER
SERIALNUMBER
POWER
6ZLWFKꢁLQꢁ³21´
ꢄXSꢅꢁPRGH
POWER
CORD
NOTE: This same connection configuration can be used with OUTPUT A and B used in a
full-range mode when the THRU/HIGHPASS switch is in the "THRU" (up) position.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
Titan™ 12/15 ACTIVE REAR PANEL LAYOUT
HHDW Sink
1
HI / LOW EQ
2
(HTXDOizDWionꢅ
POWER ON
conWUoOs
LED inGicDWoU
3
5
7
DQG LIMIT LED
inGicDWoU
O
O
0
0
VOLUME
conWUoO A&B
4
POWER ON /
OFF swiWch
MA
X
MA
X
-10dB
+10dB
RCA INPUT L & R
(LHIW DQG RiJhWꢅ
6
³BRO™”
ciUcXiW swiWch
O
FF
O
N
HIG
LO
H
W
MIC / LINE swiWch
-10dB
+10dB
8
G
A
IN
OUTPUT soXUFH
LOOP / MIX
swiWch
LO
O
P
MI
X
CD/TAPE
9
XLR / ¼" combo
POWER
connHcWoU
11
10
jDcks IoU INPUT
A & B
(BALANCED)
INPUT
(BALANCED)
OUTPUT
A
XLR
OUTPUT
connHcWoU
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Titan™ Sub-A12 CONNECTION DIAGRAM # 2
USING TWO Titan™ Sub-A12 WITH
TWO POWER SPEAKERS
1
2
0
H
z
1
5
0
H
z
1
0
0
z
H
z
1
8
0
2
H
0
z
8
0
H
0
H
z
0
180
M
A
X
W
PASS FILTER
(
A
L
/
N
B
A
ꢅ
(
B
A
C
E
R
AC0 240V 50Hz 250W
FUSE T3.15AL250V
INPUT
OUTPUT
1
2
0
H
z
1
5
0
H
z
1
0
0
z
H
z
1
8
0
2
H
0
z
8
H
0
H
z
0
180
M
L
PASS FILTER
L
(
B
/
U
ꢅ
(
B
A
R
AC20 50Hz 250W
FUSAL250V
INPUT
OUTPUT
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
Titan™12A / 15A CONNECTION DIAGRAM # 1
Basic microphone / playback hookup
MP3 Player
HI
0
0
0
ON
OFF
LIMIT
OFF
-
M
A
X
-
MA
X
’
’
-10dB
+10dB
VOLUME
VOLUME
POWER
LOW
0
L
ON
HIGH
LOW
BASS RESPONSE
INPUT
-10dB
+10dB
MIX
OR
R
Place switch
down in
“MIX”
GAIN
EQ
AT
LOOP
CD/TAPE
position
AC Power Cord
AC220-240V~50Hz
400W
FUSE T4AL 250V
(BALANCED)
INPUT
(BALANCED)
OUTPUT
A
B
Microphone
Connect to power outlet
Titan™12A / 15A CONNECTION DIAGRAM # 2
Connecting two Titan™ 12 ACTIVE speakers together
,QSXWꢁꢆꢁIURPꢁDꢁPLFURSKRQHꢁRU
WKHꢁRXWSXWꢁRIꢁDꢁPL[HU
ꢄ%HꢁDZDUHꢁRIꢁ0,&ꢇ/,1(ꢁVZLWFKꢁVHWWLQJꢀꢅ
HI
0
0
0
ON
OFF
LIMIT
-
MAX
-
MAX
’
’
-10d
B
+10dB
VOLUME
VOLUME
POWER
LOW
0
L
OFF
ON
HIGH
LOW
BASS RESPONSE
INPUT
-10
d
B
+10dB
O
GAIN
R
Place switch
down in
“MIX”
EQ
AT
LOOP
MIX
CD/TAPE
position
AC220-240V~50Hz
400W
FUSE T4AL 250V
(BALANCED)
(BALANCED)
OUTPUT
INPUT
A
B
HI
0
0
0
ON
OFF
LIMIT
OFF
-
M
A
X
-
M+A6
X
’
’
-120d
B
+120d
B
VOLUME
VOLUME
INPUT
POWER
LOW
0
L
ON
HIGH
LOW
BASS RESPONSE
-102dB
+120
dB
d
O
AT
R
EQ
Place switch
down in
“MIX”
LOOP
MIX
CD/TAPE
position
AC220-240V~560Hz
400W
FUSE T4AL 250V
(BALANCED)
INPUT
(BALANCED)
OUTPUT
A
B
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Titan™ Sub A12 Rear Panel Features
1. HEAT SINK -
2. VOLUME CONTROL -
3. INPUT L -
Cooling fins for amplifier. Do not obstruct.
Adjusts the volume.
Balanced line level input via a XLR/ ¼” combo connector.
Balanced line level input via a XLR/ ¼” combo connector.
Balanced male XLR connector provides output HIGHPASS signal.
Balanced male XLR connector provides output HIGHPASS signal.
This is the connection for the IEC AC power connector.
LED indicator illuminates when the signal limiting function is activated.
LED indicator illuminates when the unit is powered up
Turns the power on and off to the subwoofer amplifier module.
Selects the polarity of the signal being sent to the subwoofer.
0° selects the signal polarity as it appears at the input.
The 180° selection inverts the polarity of the signal.
4. INPUT R -
5. OUTPUT R -
6. OUTPUT L -
7. POWER SOCKET -
8. LIMIT LED -
POWER LED -
9. POWER SWITCH -
10. PHASE SWITCH -
11. CROSSOVER
FREQUENCY
CONTROL-
Adjustable 80Hz/100Hz/120Hz/150Hz/180Hz/200Hz.
CROSSOVER FREQUENCY
11
CONTROL
HHDW Sink
1
120Hz
10z
150Hz
180Hz
200Hz
80Hz
0
VOLUME
CONTROL
PHASE SWITCH
POWER SWITCH
10
2
180
M
A
X
LOW
PASS FILTER
9
8
L
LIMIT LED AND
POWER LED
(BAL/UNBA
L
ꢅ
(BALANCE
D
ꢅ
R
POWER SOCKET
7
AC220 240V 50Hz 250W
FUSE T3.15AL250V
INP UT
OUTUT
OUTPUT L
OUTPUT R
6
5
INPUT
INPUT
L
3
4
R
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
Titan™ Sub-A12 CONNECTION DIAGRAM # 1
TWO CHANNEL SYSTEM WITH HIGHAPASS OUTPUT
120
H
z
150
H
z
100
80
H
z
180
H
z
H
z
200
H
z
0
180
M
A
X
LOW
PASSFILTER
L
(
BAL/UNBA
L
ꢅ
(
BALANCE
D
ꢅ
R
AC220 240V 50Hz 250W
FUSE T3.15AL250V
INPUT
OUTPUT
/HIW
2XWSXW
5LJKW
2XWSXW
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Titan™ 8/12/15 ACTIVE Rear Panel Features
1. Heat Sink: The heat sink allows for dissipation of heat built up from the amplifier
via air cooling at the rear of the enclosure.
2. HI and LOW EQ (equalization) controls: These knobs control the equalization of
the overall output signal providing +/- 10dB in each frequency range.
3. POWER ´ON´ indicator LED and LIMIT indicator LED: The bracketed LED to the left
of the POWER switch illuminates when the power switch is in the´ON´ position.
The LIMIT LED illuminates when the signal limiter is actively limiting the level of
the signal to prevent distortion and overload.
4. VOLUME controls for INPUT A and INPUT B: These knobs control the volume of
each input channel (Titan 8 VOLUME controls is MAIN) .
™
5. POWER ON / OFF switch: This switch: tums the power on and off.
6. RCA L / R (Left and Right) input jacks: These jacks provide for the input of a stereo
signal (left and right). The signal is actively combined or “summed” providing a
mono signal to the amplifier.
7. “BRO™” Bass Response Optimizer circuit switch: The BRO™ circuit, when
engaged, allows for enhanced low frequency response at lower volume levels.
8. GAIN selection switch: This switch selects the proper gain structure for INPUT A. If
a microphone is connected to INPUT A, use the HIGH selection (up). If the signal
source is anything other than a microphone (playback device, keyboard or mixer
output, for instance) use the LOW selection (down) .
9. Output source “LOOP / MIX” switch: In the “LOOP” mode, this switch routes the
signal of INPUT B to the line level XLR OUTPUT jack, bypassing the EQ section and
volume control. When in the MIX mode, this switch routes the combined (or
“mixed”) signals of both INPUT A and INPUT B to the line level XLR OUTPUT jack.
10. XLR / ¼” COMBO input jacks for INPUT A and INPUT B: These convenient jacks
provide for either XLR or ¼” balanced input connections to INPUT A and INPUT B
(Titan™ 8 XLR ¼” COMBO input jacks for INPUT ).
11. POWER cord jack: This is a jack for a standard IEC, three prong, grounded AC
electrical connection cord. Be sure that you are plugging into the correct source
voltage that matches what is indicated just below the power cord jack.
12. XLR line level OUTPUT jack: This jack provides a balanced line level output of
INPUT A and INPUT B signals (in MIX mode) or INPUT B signal only (in LOOP mode)
for connection to additional Titan™ 12 / 15 ACTIVES, powered subwoofers or
amplifiers.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
Titan™ Sub-A15 - REAR PANEL FEATURES
1. INPUT A - Balanced line level input via a XLR / ¼” combo connection.
2. OUTPUT A - Balanced male XLR connection provides output “THRU” or HIGHPASS signal
(depending on switch setting).
3. SPEAKER LEVEL INPUT - Allows for connection of the output of an external amplifier to
use the Titan™ Sub-A15 as a passivesubwoofer.
NOTE: Disconnect the power cord when using the Titan™ Sub-A15 in this mode.
4. INPUT B - Balanced line level input via a XLR / ¼” combo connection.
5. OUTPUT B - Balanced male XLR connection provides output “THRU” or HIGHPASS signal
nding on switch setting).
6. HEATSINK - Cooling fins for amplifier. Do not obstruct.
7. VOLUME CONTROL - Adjusts volume level of the subwoofer.
8. THRU / HIGHPASS SWITCH - Selects the signal type that is routed to the OUTPUT jacks.
“THRU” sends the unprocessed signal to the outputs. “HIGHPASS” filters the signal and
only sends signals above 100Hz to the outputs.
9. PHASE SWITCH - Selects the polarity of the singal being sent to the subwoofer. 0° selects
the signal polarity as it appears at the input. The “180°” selection inverts the phase of
the signal.
10. LIMIT LED - LED indicator illuminates when the singal limiting function is activated.
11. POWER LED - LED indicator illuminates when the unit is powered up.
12. POWER SOCKET - This is the connection for the IEC AC power connector.
13. POWER SWITCH - Turns the power on and off to the subwoofer amplifier module.
HEATSINK
6
VOLUME
CONTROL
OUTPUT
INPUT
7
(B
A
L
A
N
C
E
D
)
(B
A
L
A
N
C
E
D
)
INPUT A
1
0
A
WWW.WHARFEDALEPRO.CO
_
MAX
THRU/HIGHPASS
SWITCH
VOLUME
OUTPUT A
2
3
8
CAUTION
ELECTR IC SHO CK
RISK
O
D
F
O
N
O
T
O
PE
N
THRU
(100Hz)
SPEAKER
LEVEL INPUT
0°
AVIS: RISQUE DE CHOC ELECTRIQUE -NE PAS OUVRIR
PHASE SWITCH
LIMIT LED
9
10
11
180°
PHASE
HIGHPASS
SPEAKER
LEVEL IN
LIMIT
INPUT B
4
5
B
POWER LED
POWER SOCKET
POWER SWITCH
ON
OUTPUT B
(B
A
L
A
N
C
ED
)
(B
A
L
A
N
C ED )
OFF
12
13
OUTPUT
INPUT
AC 220-240V~50Hz 400W
FUSE T4AL250V
POWER
SERIALNUMBER
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Titan™ 8 / Titan™ 12 / Titan™ 15 ACTIVE
Connecting the Titan™ Active Series to your system is just as easy, with a couple more things to do. Plug
in the electrical cable and your audio cables and switch the unit on. Always be sure there is a good
electrical ground. The Titan™ Series rear panel has one combo XLR / TRS Jack input. Be sure to use high
quality shielded cable and high quality connectors. The volume control is conveniently located above
the input sensitivity switch (mic/line). Be sure you have that switch in the correct position.
The Loop / Mix Switch - Titan™ 12A / 15A ONLY
The LOOP/MIX switch allows you to control the signal content going to the XLR OUTPUT jack. In the
“LOOP” mode, this switch routes the signal of INPUT B to the line level XLR OUTPUT jack, bypassing the
EQ section and volume control. When in the MIX mode, this switch routes the combined (or “mixed”)
signals of both INPUT A and INPUT B to the line level XLR OUTPUT jack. This signal can then be sent to
additional powered speakers or powered subwoofers.
Titan™ 8 ACTIVE - REAR PANEL FEATURES
1
HHDW Sink
POWER ON
LED iQGicDWoU
DQG LIMIT LED
iQGicDWoU
3
5
4
8
VOLUME conWUoOs
MIC/ LINE swiWch
POWER ON/OFF
swiWch
POWER
cRQQHcWoU
11
XLR oU 1/4”
combo jDcksꢁIoU
INPUT
10
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
CONNECTION DIAGRAM # 2
USING TWO Titan™ Sub-A15's
WITH TWO POWERED SPEAKERS
TO LEFT
MAIN
POWERED
SPEAKER
OUTPUT
INPUT
(B
A
L
AN
C
E
D
)
(B
A
L
AN C E D )
0
FROM
MIXER
OUTPUT
LEFT
A
WWW.WHARFEDALEPRO.COM
_
MAX
VOLUME
CAUTION
RISK
O
D
F
O
ELECTRIC
SHO
N
C
K
POWER
CORD
!
N
O
T
O
PE
THRU
(100Hz)
0°
WARNING: SHOCK HAZARD DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE -NE PAS OUVRIR
180°
PHASE
HIGHPASS
SPEAKER
LEVEL IN
TO INPUT OF 2nd
SUBWOOFER
N 2082
B
ON
(B
A
L
A
N
C
ED
)
(B
A
L
AN C E D )
OFF
POWER
CORD
OUTPUT
INPUT
AC 220-240V~50Hz 400W
FUSE T4AL250V
POWE
RIGHT SIDE
SUBWOOFER
SERIALNUMBER
LEFT SIDE
SUBWOOFER
OUTPUT
INPUT
(B
A
L
AN
C
E
D
)
(B
A
L
AN C E D )
FROM
0
MIXER
OUTPUT
RIGHT
A
WWW.WHARFEDALEPRO.COM
_
MAX
VOLUME
CAUTION
RISK
O
D
F
O
ELECTRIC
SHO
N
C
K
!
N
O
T
O
PE
THRU
(100Hz)
0°
WARNING: SHOCK HAZARD DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE -NE PAS OUVRIR
180°
HIGHPASS
SPEAKER
LEVEL IN
PHASE
N 2082
LIMIT
TO RIGHT
MAIN
POWERED
SPEAKER
POWER
CORD
B
ON
(B
A
L
A
N
C
ED
)
(B
A
L
AN C E D )
OFF
OUTPUT
INPUT
AC 220-240V~50Hz 400W
FUSE T4AL250V
POWER
POWER
CORD
SERIALNUMBER
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
CONNECTION DIAGRAM # 3
Titan™ 8/12/15 MONO MAIN
SYSTEM WITH TWO MONITORS
(another view)
PARALLEL
CONNECTION TO
SECOND MAIN
SPEAKER
MAIN SPEAKER #1
MAIN SPEAKER #2
INPUT:
INPUT:
+1 Positive
-1 Negative
+1 Positive
-1 Negative
OR
PARLLEL INPUTS
PARALLEL INPUTS
WWW.WHARFEDALEPRO.COM
WWW.WHARFEDALEPRO.COM
(CHANNEL 1)
FROM MIXER
MAIN OUT
TWO CHANNEL
AMPLIFIER OUTPUTS
MODEL S-SERIES
FROM MIXER
Professional Power Amplifier
= NL4 Connection
= ¼” Connection
WWW.WHARFEDALEPRO.COM
MONITOR OUT
AMPLIFIER INPUTS
(CHANNEL 2)
PARALLEL
CONNECTION
TO SECOND
MONITOR
MONITOR SPEAKER #1
MONITOR SPEAKER #2
SPEAKER
INPUT:
+1 Positive
-1 Negative
INPUT:
+1 Positive
-1 Negative
OR
PARALLEL INPUTS
PARALLEL INPUTS
WWW.WHARFEDALEPRO.COM
WWW.WHARFEDALEPRO.COM
NOTEꢀꢁ7KLVꢁFRQ¿JXUDWLRQꢁUHSUHVHQWVꢁDꢁꢂꢁRKPꢁORDGꢁWRꢁHDFKꢁRXWSXWꢁFKDQQHOꢁRIꢁWKHꢁ
ꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁDPSOL¿HUꢃꢁ
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
SPECIFICATIONS - Titan™ ACTIVE SERIES
Titan™ 12 ACTIVE
Titan™ 15 ACTIVE
Active 15” 2-way Bi-Amplified
50-20kHz
Titan™ 8 ACTIVE
Active 8” 2-way Bi-Amplified
70-20kHz
System Type
Active 12” 2-way Bi-Amplified
55-20kHz
Frequency Response (+/-3dB)
Low Frequency Driver (mm/in.)
High Frequency Driver
Exit Size (mm / inches)
Dispersion (H x V)
305mm / 12”
381mm / 15”
205mm / 8”
Titanium Compression Driver
25mm / 1"
Titanium Compression Driver
25mm / 1"
Compression Driver
30mm / 1.2"
90° x 60°
90° x 60°
90° x 60°
Impedance (ohms)
ꢄŸ
ꢄŸ
ꢄŸ
Amplifiers
Low Frequency (Class D)
High Frequency (Class A/B)
Electronic Crossover:
Crossover Frequency
Equalization:
Rated 250W RMS, 500W Peak
Rated 50W RMS, 100W Peak
24dB/octave Linkwitz-Riley
2.3kHz
Rated 350W RMS, 700W Peak
Rated 70W RMS, 140W Peak
24dB/octave Linkwitz-Riley
1.8kHz
Rated 150W RMS, 300W Peak
Rated 30W RMS, 60W Peak
24dB/octave Linkwitz-Riley
2.4kHz
High ( 10dB) 10kHz Shelving
Low ( 10dB) 100Hz Shelving
+5dB at 60Hz
High ( 10dB) 10kHz Shelving
Low ( 10dB) 100Hz Shelving
+5dB at 60Hz
Bass Response Optimizer (BRO™)
circuit
Subsonic Filter
Amplifier Protection
Power On
30Hz, Second-order filter
30Hz, Second-order filter
30Hz, Second-order filter
Power switch on / off mute
Amplifier shutdown, auto reset
60% Nominal line voltage
Independent LF and HF limiters
Yes
Power switch on / off mute
Amplifier shutdown, auto reset
60% Nominal line voltage
Independent LF and HF limiters
Yes
Power switch on / off mute
Amplifier shutdown, auto reset
60% Nominal line voltage
Independent LF and HF limiters
Yes
Thermal
Low Line Voltage Shut Down
Driver Protection
DC Protection
Short Protection
Clip Limiter:
Yes
Yes
Yes
Turns on approx 250W output
Red LED
Turns on approx 350W output
Red LED
Turns on approx 150W output
Red LED
Limiter Indicator
Power Indicator
Blue LED
Blue LED
Blue LED
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Titan™ REAR PANEL LAYOUT
INPUT:
+1 Positive
-1Negative
INPUT:
+1 Positive
-1Negative
PARALLELINPUTS
:
POWER HANDLING
POWER HANDLING:
150 Watts Continuous
300 Watts Program
500 Watts Peak
200 Watts Continuous
500 Watts Program
1000 Watts Peak
Impedance: 8 Ohms
Impedance:
8
Ohms
WWW.WHARFEDALEPRO.COM
WWW.WHARFEDALEPRO.COM
CONNECTION DIAGRAM #1
Titan™ 8/12/15 TWO - CHANNEL
SOUND SYSTEM CONNECTION
RIGHT SPEAKER
MICROPHONES
NL4
INPUT:
+1 Positive
-1 Negative
MIXER OUTPUTS
PARALLEL INPUTS
MIXER
M
O
D
E
LS-
S
E
RI
E
S
Prof
e
s
sio
n
al P
o
w
e
rA
m
pl
i
f
ie
r
AMP
INPUTS
W
W
W
.
W
HA
R
F
E
D
AL
E
PR
O.
C
O
M
AMPLIFIER OUTPUTS
NL4
INPUT:
+1 Positive
-1 Negative
PARALLEL INPUTS
LEFT SPEAKER
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
SPECIFICATIONS - Titan™ SUB SERIES
Titan™ Sub-A12
Reflex subwoofer
55-200Hz
TITAN™ Sub-A15
System Type
Band-pass subwoofer
Frequency Response (+/-3dB)
Enclosure Material
Enclosure Colour
45-150Hz
15mm MDF
18mm Plywood
Grey or Black
Grey or Black
Frame material
steel frame
Die-cast aluminium frame
Size (mm / inches)
Coil Size (mm / inches)
Impedance
305mm / 12”
404mm / 15”
64.26mm / 2.5”
4 ohm
75 / 3”
4 ohm
Speaker Pole Adapter
Inputs A & B - Type / Connection
Yes
Yes
Balanced Line Level inputs via
two combo connectors
Balanced Line Level inputs via
two combo connectors
0.37V
Balanced Line Level inputs via two
combo connectors
Output A & B Type / Connection
Balanced Line Level inputs via two
combo connectors
0.775V
Input Sensitivity
High Pass Frequency Selection
Phase Switch Selection
Crossover Frequency (HZ)
150Hz
100Hz
0° / 180°
0° / 180°
150
80/ 100/ 120/ 150/ 180/ 200
(adjustable)
Speaker Level Input Impedance
Speaker Level Input Connection
Amplifier Power: Continuous
Amplifier Power: Peak
Power On Indicator
1/4” TS Phone input
ꢄŸ
250W
400W
500W
600W
LED
LED
Power On Protection
Thermal Protection
Power switch on / off mute
Amplifier shutdown, auto reset
60% Nominal line voltage
Independent LF limiters
Yes
Power switch on / off mute
Amplifier shutdown, auto reset
60% Nominal line voltage
Independent LF limiters
Yes
Low Line Voltage Shut Down
Driver Protection
DC Protection
Short Protection
Yes
Yes
Clip Limiter:
Turns on approx 250W output
Red LED
Turns on approx 400W output
Red LED
Limiter Indicator
Power Indicator
Blue LED
Blue LED
Dimensions H x W x D: (mm)
Dimensions H x W x D (in)
Weight (Net) kg / lbs
360.0 x 493 x 431.0
14.2 x 19.4 x 16.9
22.31kg /49.0lbs
630.0 x 478.0 x 640.0
24.8 x 18.8 x 25.2
45.48kg / 100.0lbs
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
FEATURES
2-way reflex systems
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
ʍ
Passive (3) and Active (3) + Powered Subs (2)
Low distortion, high power woofers
25.4mm Titanium high frequency compression drivers
BRO™ Bass Response Optimizer (Titan™ 12/15 Active)
Class D Low Frequency Amplifier (Active)
Class A/B High Frequency Amplifier (Active)
XLR output for connecting to another powered speaker
RCA inputs for MP3, CD or other inputs
Integral Elliptical Wave Guide (EWG) 90° x 60°
Power On LED indicator in horn throat and back panel
Active signal limiting system with LED indicator
™
DTF™ Dynamic Thermal Filament HF driver protection (Titan 8,12,15 Passive)
Light weight, high strength Polypropylene cabinet
Integral 35mm (1-3/8”) stand socket
M6, M8 hanging points
NL4 & 1/4” speaker inputs (Passive)
Combo XLR/ 1/4” input jacks (Active)
Internal crossover passive outputs (Sub-A12/15)
Accommodates OmniMount® 60.0 bracket
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
DIMENSIONS
15.83”
402mm
27.87”
708mm
2
18.81”
478mm
15.83”
402mm
8.7”
221mm
15.59"
396mm
2
10.47”
266mm
8.7"
221mm
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
WHAT ABOUT THE Titan™ SERIES?
Wharfedale Pro Titan™ Series of passive and self-powered foreground/back-ground music
and sound reinforcement speakers are designed for demanding professional applications
such as reproduction and reinforcement of music and sound in venues as diverse as live
performance venues, airports, houses of worship, A/V presentations, schools, retail shops,
restaurants and public houses.
The Titan™ Series loudspeakers are high quality speaker systems designed to provide the
best sound in a compact, feature laden, easy to use package. It is designed to provide
transparent and accurate sound reproduction or reinforcement. The 25mm Exit Titanium
high frequency drivers project crystal clear high frequencies . A proprietary 90° x 60°
Elliptical Wave Guide (EWG) delivers the high frequencies in a well defined, even coverage
pattern. Dynamic passages, such as the crack of a snare drum or the report of a cannon,
come through just like the real thing.
The Titan™ Series are also ideal in Audio/Visual applications. The rich accurate sound is a
great complement to any visual performance or presentation. Easy to transport and quick to
set up, the Titan™Active Series is the ideal choice for the serious professional.
Accessory wall brackets and rigging components available.
INTRODUCTION
Wharfedale Pro Titan™ Series loudspeakers are the result of many years of experience in
the use, design and manufacturing of professional loudspeaker products. We take great
pride in engineering and building every Wharfedale Pro loudspeaker and wish to thank you
for entrusting us with your sound.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present, Wharfedale
Loudspeakers have maintained the same standard of quality in components, workmanship
and performance. Actually, Wharfedale is one of a few present day manufacturers that
design, engineer and build all of their own transducers.
Please take a few minutes to read this manual completely in order to ensure that you get
the most out of your Titan™ Series Loudspeaker system.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING MANUAL AND USER GUIDE
DIMENSIONS
493.0
Titan SUB A12
TOP VIEW
463.0
1
2
0
H
z
150Hz
1
0
0
z
H
z
1
8
0
2
H
z
8
0
H
0
0
H
z
0
1
8
0
M
A
X
LOW
SS
P
A
FILTER
L
(
B
A
L
/
U
N
B
A
L
)
(
B
A
L
ANCED)
R
A
C
F
2
U
2
S
0
2
E
40
V
5
0
Hz
250V
250W
I
N
P
U
T
O
U
TPUT
T
3
.
1
5
A
L
431.0
FRONT VIEW
SIDE VIEW
REAR VIEW
Titan SUB A15
TOP VIEW
INPUT
OUTPUT
(BALANCED)
(BALANCED)
0
A
_
MAX
WWW.WHARFEDALEPRO.COM
VOLUME
CAUTION
R
I
S
K
O
F
E
L
E
C
T
R
I
C
S
H
O
C
K
THRU
0°
D
O
N
O
T
O
PEN
!
S OUVRIR
WARNING: SHOCK HAZARD DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE NE PA
(100Hz)
180°
-
HIGHPASS
SPEAKER
LEVEL IN
PHASE
LIMIT
N
2082
B
ON
(BALANCED)
INPUT
(BALANCED)
OUTPUT
OFF
POWER
AC 220-240V~50Hz 400W
FUSE T4AL250V
SERIALNUMBER
LEFT SIDE VIEW
FRONT VIEW
RIGHT SIDE VIEW
BACK VIEW
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
IMPORTANT SAFETY INFORMATION POWERED PRODUCTS
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Warning: To reduce the risk of fire or electrical
shock, do not expose this product to rain or moisture.
The product must not be exposed to dripping and
splashing and no object filled with liquids such as a
vase of flowers should be placed on the product.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
This symbol indicates that dangerous
voltage constituting a risk of electric shock
is present within this unit.
No naked flame sources such as candles should be
placed on the product.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user's
authority to operate this device.
Read these instructions.
Keep these instructions.
Head all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Warning: The mains power switch for this appliance
is located on the rear panel. To permit free access to
this switch, the apparatus must be located in an open
area without any obstructions.
ESSENTIAL INFORMATION FOR UK USERS
Do not install near any heat sources such as radiators,
heat registers, Stoves, or other apparatus(including
amplifiers) that produce heat.
The power cord on your subwoofer may be supplied
with a plug incorporating a fuse, the value of which
is indicated on the pin face of the plug. Should the
fuse need to be replaced, an ASTA or BSI approved
BS1362 fuse must be used of the same rating. If the
plug is cut off it must NOT be re-used. Dispose of any
such plug safely. There is a danger of electric shock if
a cut-off plug is inserted into a mains socket.
Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type
plug has two blades and a third grounding prong.
The wider blade or the third prong are provided for
your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
The wires in the mains lead are coloured in
accordance with the following code: Green and
Yellow - Earth: Blue - Neutral: Brown - Live.
As the colours of the wires in the mains lead may
not correspond with the markings identifying the
terminals in the replacement mains plug, proceed as
follows:
The wire coloured Blue must be connected to the
terminal marked with the letter ¨N¨ or coloured
Black. The wire coloured Brown must be connected
to the terminal marked with the letter ¨L¨ or coloured
Red. The wire coloured Green and Yellow must be
connected to the terminal marked with the letter ¨E¨
, or coloured Green, or Green and Yellow, or marked
with the Earth symbol.
Protect the power cord from being walked on
or pinched, particularly at Plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Use only attachments/accessories specified by the
manufacturer.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination avoid injury from
tip-over.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Wharfedale Professional
IAG HOUSE Sovereign Court, Ermine Business Park Huntingdon, Cambs, PE29 6XU, England
Wharfedale Professional reserves the right to alter or improve specifications without notice
All rights reserved © 2008 Wharfedale Pro. Wharfedale Pro is a member of the International Audio Group (IAG).
Download from Www.Somanuals.com. All Manuals Search And Download.
ᥦ⠜ᮍᓣ
ᇕᑩ
ᇕ䴶
30
28
26
24
22
20
18
16
14
12
10
8
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
6
4
2
Download from Www.Somanuals.com. All Manuals Search And Download.
|