W H A R F E D A L E
P R O
E V P - X P
S E R I E S
EVP-XP POWERED SERIES
PROFESSIONAL LOUDSPEAKER
USER MANUAL.
THIS USER MANUAL COVERS THE FOLLOWING MODELS:
EVP-X12P • EVP-X12PM • EVP-X15P • EVP-X15PM •
EVP-X215P
EVP-X15PB • EVP-X18PB Subwoofers
Contents:
Page 1: Warning and Safety Instructions
Page 2: Specifications/Operating and Use
Page 3. Product Features/ EVP-X12PM/15PM Panel
Page 4: EVP-X18PB Rear Panel Diagram
Page 5: EVP-X15PB and EVP-X18PB Operation
Page 6: Single EVP-X18PB with Stereo Mid/High Active System and Stereo Active Sub and Mid/High System
Page 7: Stereo Passive Mid/High Speaker with Active Sub System and EVP-X15P/18PB Block Diagram
ƽ WARNING & SAFETY INSTRUCTIONSƽ
1. READ INSTRUCTIONS carefully before operating this product.
RETAIN these instructions.
with an extension cable unless the pins can be fully inserted.
2.
7. CABLES - Use quality screened cables for signal connections.
3. COMPLY WITH WARNINGS - All warnings and instructions for
this product should be adhered to.
8. ƽ ꢀ RIGGING • SUSPENDING • MOUNTING
The rigging, suspension or mounting of this speaker system can
expose members of the public to serious health risks and even
death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG,
SUSPEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS
YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY
RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES.
ALL RELEVANT SAFETY REGULATIONS MUST BE
Ɖ
4. Ꮨ WATER & MOISTURE
- This Wharfedale Pro unit should
not be used near liquids. If should not have liquids placed on or in
close proximity as there are ᏘDANGEROUS VOLTAGES
present.
5. ƽ VENTILATION/AIR FLOW: This Wharfedale Pro unit
should not have its heat sinks obstructed from air flow. It should
not be situated in a built-in installation that may hamper air flow to
the heat sinks. It should not be placed near heat sources.
FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO
NOT KNOW OF PERTINENT REGULATIONS, CONSULT
QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.
9. Ꮧ CAUTION: These professional loudspeaker systems are
capable of generating very high sound pressure levels. Use care
with placement and operation to avoid exposure to excessive
levels that can cause permanent hearing damage.
6. Ꮨ POWER SUPPLY: This Wharfedale Pro unit should be only
connected to a power supply as stated on the unit. Power supply
cables should be routed where they will not be walked on or
pinched by objects placed adjacent or upon them.
10. SERVICING - The user should not attempt to service this
product except that mentioned in this manual.
7. Ꮨ ELECTRIC SHOCK: Care should be taken that the grounding
of this unit is NOT defeated. Do not use this units power cable
Wharfedale Pro EVP-XP Series of Professional Sound Reinforcement Loudspeakers
Unpacking
All Wharfedale Pro products are fully
checked before leaving the factory.
Wharfedale Pro Limited Warranty*
Wharfedale Pro EVP-XPSeries loudspeaker systems are warranted
After unpacking please inspect
to be clear of manufacturing or materials defects for a period of
one year from the original date of purchase. In the event of
malfunction, contact your authorised Wharfedale Professional
dealer or distributor for information.
cabinets for any physical damage.
Please retain the shipping carton if
possible and internal packing material
in case the unit needs to be returned. Please check as soon
as possible the unit is functioning. In the event of any damage
please contact your dealer immediately so that a written claim
for damages can be made.
*Be aware that warranty details may differ from country to
country. Contact your dealer or distributor for information.
These terms do not infringe your statutory rights.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
W H A R F E D A L E
P R O
E V P - X P
S E R I E S
EVPX-15PB and EVPX-18PB Active Subwoofers
Product Features of the EVP-XP Series:
• Stereo line input and speaker level input available for the
powered subwoofer
• 300W RMS/500W Peak amplifier (EVP-X12P, EVP-X12PM)
•
Peak limiter that protects the amplifier and speaker from
clipping.
• 400W RMS/600W Peak amplifier (EVP-X15P,15PM,215P)
• Thermal, DC fault and short circuit protection
• Hi/Low EQ control in the master section
•
•
•
•
•
0°, 180°Phase switch
Built-in 600 watt (peak), 400 watt (continuous) amplifier
Thermal, DC fault and short circuit protection
• 5 Band Graphic EQ (EVP-X12PM/15PM onlyoonly)
• External speaker output connector (EVP-X12PM/15PM only)
• Integral tripod stand adaptor (except monitors)
• Balanced line output
Power on and system AGC protect LED indicators
Integral, preset limiter prevents clipping and distortion. Line-
level stereo inputs are summed before being sent to the
subwoofer’s internal amplifier. This feature allows the subwoofer
to operate in stereo systems using a single subwoofer
A pair of an integral 150Hz, 24dB/Oct crossovers to send a
high-pass, balanced, line-level, stereo signal to a pair of
powered satellite full-range speakers or an external amplifier for
passive satellite speakers.
• Integral, preset limiter prevents clipping distortion
• Combined Jack and XLR balanced input connectors
• Power on and system AGC protect LED indicators
•
A speaker-level, 1/4” TS phone jack is provided. This input is
useful in applications, such as those employing powered
mixers, in which it is more practical to bring a full-range,
speaker-level signal to the subwoofer amplifier
The EVP-X15/18PB is a 15/18 inch direct-radiating powered
subwoofer. A built-in 600 watt (peak) amplifier accepts stereo or
mono line level inputs via balanced, XLR connectors as well as
single channel speaker level input via a 1/4 inch phone jack.
Integral signal processing includes a stereo crossover and
limiting for the internal amplifier. A pair of XLR out-put
connectors may be used to pass the input signals to another
system or to send a high-pass, line-level stereo signal to a pair
of powered, full-range speakers.
5
EVP-X12PM/15PM Panel & Description:
1. Level control: The Level control adjusts the overall volume
of the amplified signal.
2. 5 band EQ: Use this Five-Band Graphic EQ to cut or boost
your signal up to 12dB at designed frequency centers.
This is useful for reducing low frequency rumble or
feedback that often occurs on stage.
2
1
3. Parallel Line input and output: These two jacks are
provided to supply a signal input to the EVP-X15PM and to
allow for daisy chaining the signal to possibly another
EVP-X15PM or amplifier combination.
3
4. Speaker out: The Speaker Out is a post EQ, powered
output designed for speakers with a minimum impedance of
8 ohms speaker. This output should be connected only to
non-powered monitor speakers. The EVP-X15M is the
perfect extension monitor to use in this application.
5. Power switch: use this switch to turn the unit on and off.
6. AC Input connector: The line cord (included) which
provides AC power to the unit. Connect the line cord to
this connector and to a properly grounded AC supply.
Damage to the equipment may occur if an improper line
voltage is used.
4
6
5
7
NEVER REMOVE OR CUT THE GROUND PIN OF THE
LINE CORD PLUG
7. Fuse: If the fuse should fail, it must be replaced with the
same type and value in order to avoid damage to the
equipment and prevent voiding the warranty.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
W H A R F E D A L E
P R O
E V P - X P
S E R I E S
IAG LTD,HUNTING TON,UK
4
3
2
1
5
6
7
8
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
W H A R F E D A L E
P R O
E V P - X P
S E R I E S
EVP-X15/18PB:
1. INPUT A & INPUT B CONNECTORS-
These electronically balanced, XLR and 1/4 “ phone connectors accept input signal from line-
level sources. INPUT A and INPUT B are combined before being routed to the EVP-X15/18PB
Low Pass Filter and internal amplifier. INPUT A and INPUT B are also routed to the OUTPUT A
and OUTPUT B connectors.
2. OUTPUT A & OUTPUT B CONNECTORS-
OUTPUT A & B provide either a loop-thru or highpassed, line level output of the signal from the
INPUT A and INPUT B connectors respectively. These connectors work with the OUTPUT A &B
switch.
3. SPEAKER LEVEL INPUT-
This 1/4” phone jack allows connection of the speaker level output of an amplifier or powered
mixer to the EVP-X15/18PB internal amplifier.
4. VOLUME-
This control enables you to adjust the sound volume level. This does not affect OUTPUT A & B
5. OUTPUT A&B SWITCH-
This switch affects the s ignal se nt to the OUTPUT A & B connectors. THRU: The INPUT A
signal is passed directly to the OUTPUT A connector and INPUT B signal is passed directly to
the OUTPUT B connector.
High Pass Filter (HPF): The INPUT A signal is first passed through a 100Hz, 24dB High Pass
Filter before being sent to the OUTPUT A connector whilst the INPUT B signal is first passed
through a 100Hz, 24dB High Pass Filter before being sent to the OUTPUT B connector
6. PHASE SWITCH-
This switch enables you to select a phase. This switch will usually be set to NORMAL(0 ). The
REVERSE (180°) setting may improve low-range sounds, depending on the type and location of
the entire speaker system. Try both settings and select the one with better sounding low-range
output.
7. POWER switch-
This switch turns the AC power ON and OFF.
8. AC input-
The power cable that is included with the unit should be inserted here.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
W H A R F E D A L E
P R O
E V P - X P
S E R I E S
SINGLE EVP-X18PB WITH STEREO MID/HIGH ACTIVE SYSTEM
EVP-X15P
EVP-X15P
STEREO ACTIVE SUB AND MID/HIGH SYSTEM
EVP-X15P
EVP-X15P
Page6
Download from Www.Somanuals.com. All Manuals Search And Download.
W H A R F E D A L E
P R O
E V P - X P
S E R I E S
STEREO PASSIVE MID/HIGH SPEAKER WITH ACTIVE SUB SYSTEM
From Power Amplifier
Left Output
From Power Amplifier
Right Output
Boost
HIGH FREQUENCY
LEVEL
Boost
HIGH FREQUENCY
LEVEL
IAGLTD,HUNTINGTON,UK
IAGLTD,HUNTINGTON,UK
SPKR
LEVEL
INPUT
HPF
EQ
LPF
INPUT
A
B
PHASE
0/180
400W
OUTPUT
A
HPF
HPF
POWER
LIMIT
B
OUTPUTS A& B
THRU HIGH PASS
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
W H A R F E D A L E
P R O
E V P - X P
S E R I E S
Page8
Wharfedale International Limited, IAG House, Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU England
IAG Professional reserve the right to alter or improve specifications without notice.All rights reserved © 2004 Wharfedale Pro. A member of the International Audio Group
Download from Www.Somanuals.com. All Manuals Search And Download.
|