Model No. WLTL24308.0
Serial No.
USER'S MANUAL
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if parts are missing, PLEASE DO
NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and ser-
ial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-
sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over age 35 or persons with
pre-existing health problems.
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
12. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 11. To purchase a surge suppressor, see
your local WESLO dealer or call the telephone
number on the front cover of this manual and
order part number 146148, or see your local
electronics store.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described.
4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open-
ings. To protect the floor or carpet from dam-
age, place a mat under the treadmill.
13. Failure to use a properly functioning surge
suppressor could result in damage to the con-
trol system of the treadmill. If the control sys-
tem is damaged, the walking belt may slow,
accelerate, or stop unexpectedly, which may
result in a fall and serious injury.
5. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14. Keep the power cord and the surge suppres-
sor away from heated surfaces.
15. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU-
BLESHOOTING on page 16 if the treadmill is
not working properly.)
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under age 12 and pets away
from the treadmill at all times.
16. Read, understand, and test the emergency
stop procedure before using the treadmill (see
page 12).
8. The treadmill should not be used by persons
weighing more than 250 lbs. (113 kg).
9. Never allow more than one person on the
treadmill at a time.
17. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
10. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes 18. The treadmill is capable of high speeds.
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes; never use the treadmill with bare feet,
wearing only stockings, or in sandals.
Adjust the speed in small increments to avoid
sudden jumps in speed.
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug the
power cord, and switch the reset/off circuit
breaker to the “off” position when the tread-
mill is not in use. (See the drawing on page 5
for the location of the reset/off circuit breaker.)
11. When connecting the power cord (see page 11),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
3
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6 and HOW TO FOLD
AND MOVE THE TREADMILL on page 15.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
24. Never drop or insert any object into any
opening on the treadmill.
25.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
21. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
22. Do not change the incline of the treadmill by
placing objects under the treadmill.
23. Inspect and properly tighten all parts of the
treadmill regularly.
26. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer-
cial, rental, or institutional setting.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
®
Thank you for selecting the new WESLO CADENCE
CT 4.8 treadmill. The CADENCE CT 4.8 treadmill of-
fers a selection of features designed to make your
workouts at home more effective. And when youʼre not
exercising, the unique CADENCE CT 4.8 treadmill can
be folded up, requiring less than half the floor space of
other treadmills.
ual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, please see the front cover of this man-
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Water Bottle Holder*
Console
Key/Clip
Handrail
Storage Latch
Hood
Reset/Off
Circuit Breaker
Walking Belt
Foot Rail
Power Cord
Wheel
Isolator
Incline Pin
Incline Leg
Idler Roller
Adjustment Bolts
*Water bottle is not included
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver
adjustable wrench , and wire cutters
,
.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-
bly. Extra hardware may be included.
M4.2 x 16mm
Screw (2)–2
M5 x 16mm
Screw (8)–2
M4.2 x 19mm
Screw (6)–4
M4.2 x 18mm
Screw (7)–6
M5 Star
Washer (9)–2
M8 x 52mm Bolt (1)–2
M10 Star
Washer (10)–2
M10 Washer
(12)–6
M10 x 58mm Bolt (4)–4
M10 x 80mm Bolt (5)–2
M10 Jam Nut
(14)–6
M8 Washer
(11)–4
M8 Jam Nut
(13 )–2
M10 x 110mm Bolt (3)–2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Make sure that the power cord is unplugged.
1
Attach the six Base Feet (86) to the bottom of
the Base (87) with six M4.2 x 18mm Screws (7).
87
86
7
86
7
7
86
86
7
7
86
2. Have a second person hold the Base (87) in the
position shown.
2
Bend
Identify the Right Handrail (81), which has a large
hole near the lower end. Hold the Right
Handrail so the bend is in the position
shown. Attach the Right Handrail to the Base
(87) with two M10 x 58mm Bolts (4), two M10
Washers (12), and two M10 Jam Nuts (14). Do
not tighten the Bolts yet.
80
81
Attach the Left Handrail (80) to the Base (87)
in the same way.
87
4
Large
Hole
12
4
14
3. Remove the two Bolts (A) and Wood Plates (B).
Discard the Bolts and Wood Plates.
3
A
B
B
A
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. With the help of a second person, raise the
Handrails (80, 81) so the Base (87) is flat on the
floor as shown. Next, position the front of the
treadmill Frame (59) between the Handrails.
4
Wire Tie
See the inset drawing. Locate the wire tie in-
side of the lower end of the Right Handrail (81).
Secure the wire tie to the Wire Harness (83).
Then, pull the upper end of the wire tie until the
end of the Wire Harness is extending from the
hole in the upper end of the Right Handrail.
80
81
Attach a Wheel (85) to the Base (87) with an M10
x 80mm Bolt (5) and an M10 Jam Nut (14).
Attach the other Wheel (not shown) in the
same way.
14
85
5
59
83
83
87
Wire
Tie
81
5. Have a second person lift and hold the front end
of the Frame (59). Hold a Frame Spacer (84) be-
tween the Right Handrail (81) and the Frame.
Attach the Right Handrail to the Frame with an
M10 x 110mm Bolt (3), an M10 Washer (12), and
an M10 Star Washer (10). Do not tighten the
Bolt yet.
5
81
84
Repeat this step on the left side of the tread-
mill.
12
3
10
59
8
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Hold the Console (88) near the Right Handrail
(81). Touch the Right Handrail to discharge
any static.
6
Connect the Wire Harness (83) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON. Remove the wire tie from the end
of the Wire Harness.
88
Console
Wire
83
Wire
Tie
Console
Wire
Insert the excess Wire Harness (83) down into
the Right Handrail (81).
81
83
7. Set the Console (88) on the Handrails (80, 81).
Start four M4.2 x 19mm Screws (6), two M5 x
16mm Screws (8), and two M5 Star Washers (9)
into the Console as shown. Then, tighten all
six Screws.
7
88
9
6
9
6
81
8
8
80
8. Carefully lower the Handrails (80, 81) to the floor.
Center the Frame (59) between the Handrails.
Tighten the four M10 x 58mm Bolts (4) and the
two M10 x 110mm Bolts (3) (only one side is
shown).
8
4
4
59
3
80, 81
Raise the Handrails (80, 81).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Attach the Latch Housing (82) to the Left
Handrail (80) with two M4.2 x 16mm Screws (2).
Make sure that the Latch Housing is oriented
as shown.
9
80
2
82
10. Attach the Incline Legs (63) to the Frame (59)
with two M8 x 52mm Bolts (1), four M8 Washers
(11), and two M8 Jam Nuts (13).
10
59
11
13
1
1
11
63
11
11
63
11. Insert the Incline Pins (62) at the desired incline
level (see HOW TO CHANGE THE INCLINE OF
THE TREADMILL on page 14).
11
62
62
12. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place. The large hex key is used to adjust the walking belt (see page 17). To protect the floor or
carpet, place a mat under the treadmill.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND ADJUSTMENT
THE PRE-LUBRICATED WALKING BELT
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
IMPORTANT: The treadmill is not compatible with
GFCI-equipped outlets.
Your treadmill features a walking belt coated with high-
performance lubricant. IMPORTANT: Never apply sil-
icone spray or other substances to the walking
belt or the walking platform. Such substances will
deteriorate the walking belt and cause excessive
wear.
HOW TO PLUG IN THE POWER CORD
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
1
Grounded Outlet Box
Surge Suppressor
Grounding Pin
installed by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeʼs power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appli-
ances being turned on or off. To decrease the possi-
bility of your treadmill being damaged, always
use a surge suppressor with your treadmill (see
drawing 1 at the right). To purchase a surge sup-
pressor, see your local WESLO dealer or call the
telephone number on the front cover of this man-
ual and order part number 146148, or see your local
electronics store.
Grounding Pin
Grounded Outlet
Grounding Plug
2
Grounded Outlet Box
Adapter
Surge Suppressor
Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge sup-
pressor (TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps. There must be a moni-
toring light on the surge suppressor to indicate
whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill. If
the control system is damaged, the walking belt
may change speed, accelerate or stop unexpect-
edly, which may result in a fall and serious injury.
Lug
Metal Screw
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
Key
Clip
FEATURES OF THE CONSOLE
HOW TO TURN ON THE POWER
The treadmill console offers a selection of features
designed to make your workouts more effective. When
you select the manual mode of the console, you can
change the speed of the treadmill with the touch of a
button. As you exercise, the console will display con-
tinuous exercise feedback.
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not
do this, you may damage the console displays or
other electrical components.
Plug in the power cord (see
page 11). Next, locate the
The console also features two speed workouts. Each
workout controls the speed of the treadmill as it guides
you through an effective exercise session.
reset/off circuit breaker on
the treadmill frame near the
power cord. Switch the cir-
cuit breaker to the reset po-
sition.
Reset
Position
To use the manual mode, see page 13. To use a
speed workout, see page 14.
IMPORTANT: If there are sheets of clear plastic on
the console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothes. Then,
while using the treadmill. The first time you use the insert the key into the console. After a moment, the dis-
treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 17).
plays will light. IMPORTANT: In an emergency situa-
tion, the key can be pulled from the console, caus-
ing the walking belt to slow to a stop. Test the clip
by carefully taking a few steps backward; if the key
is not pulled from the console, adjust the position
of the clip.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
The lower right display—The lower right display
can show the speed of the walking belt and the ap-
proximate number of calories that you have
burned.
See HOW TO TURN ON THE POWER on page
12.
The upper display—The upper display can show
the elapsed time, the distance that you have walked
or run, the speed of the walking belt, or the approxi-
mate number of calories you have burned. Press
the Display Mode button repeatedly until the upper
display shows the information that you are most in-
terested in viewing. Note: While information is
shown in the upper display, the same information
will not be shown in the lower left or lower right dis-
play.
2. Select the manual mode.
When the key is in-
serted, the manual
mode will be selected. If
you have selected a
speed workout, reselect
the manual mode by
pressing the Workout Select button repeatedly until
only zeros appear in the displays.
To reset the displays, press the Stop button, re-
move the key, and then reinsert the key.
3. Start the walking belt.
The console can display
To start the walking belt, press the Start button or
the Digital Speed increase button. The walking belt
will begin to move at 1 mph. As you exercise,
change the speed of the walking belt as desired by
pressing the Digital Speed increase and decrease
buttons. Each time you press a button, the speed
setting will change by 0.1 mph; if you hold down a
button, the speed setting will change in increments
of 0.5 mph.
speed and distance in ei-
ther miles or kilometers.
To see which unit of
measurement is se-
lected, remove the key,
hold down the Stop button, insert the key into the
console, and then release the Stop button. An “E”
for English miles or an “M” for metric kilometers will
appear in the upper display. Press the Digital
Speed increase button to change the unit of mea-
surement if desired. When the desired unit of mea-
surement is selected, remove the key and then
reinsert it.
To stop the walking belt, press the Stop button.
The time will begin to flash in the display. To restart
the walking belt, press the Start button or the Digital
Speed increase button.
5. When you are finished exercising, remove the
key from the console.
4. Follow your progress with the displays.
The lower left
Step onto the foot rails, press the Stop button, re-
move the key from the console, and put it in a secure
place.
display—As you exer-
cise, the lower left dis-
play can show the
elapsed time and the
When you are finished using the treadmill, switch
the reset/off circuit breaker to the “off” position and
unplug the power cord. IMPORTANT: If you do
not do this, the treadmillʼs electrical compo-
nents may wear prematurely.
distance that you have
walked or run. Note: When a workout is selected,
the display will show the time remaining in the
workout instead of the elapsed time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE A SPEED WORKOUT
1. Insert the key into the console.
To stop the workout temporarily, press the Stop
button. The time will begin to flash in the display.
To restart the workout, press the Start button or the
Digital Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed setting for the next segment.
See HOW TO TURN ON THE POWER on page
12.
2. Select either of the two speed workouts.
4. Follow your progress with the displays.
To select a speed work-
out, press the Workout
See step 4 on page 13.
Select button repeatedly
until the number of the
5. When you are finished exercising, remove the
key from the console.
desired workout appears
in the upper display. The
maximum speed setting of the selected workout
will appear in the lower right display. The workout
duration will then appear in the upper display.
See step 5 on page 13.
HOW TO CHANGE THE INCLINE OF THE TREADMILL
Each workout is divided into 30 one-minute seg-
ments. One speed setting is programmed for each
segment. Note: The same speed setting may be
programmed for consecutive segments.
To vary the intensity of your exercise, you can change
the incline of the treadmill. There are three incline lev-
els. Before changing the incline, remove the key
and unplug the power cord. Next, fold the treadmill
to the storage position (see page 15).
3. Press the Start button or the Digital Speed in-
crease button to start the workout.
To change the incline, first remove the incline pin from
one of the incline legs. Adjust the incline leg to the de-
sired position, and then fully reinsert the incline pin.
Adjust the other incline leg in the same way. CAUTION:
Before using the treadmill, make sure that both in-
cline legs are at the same height and that both in-
cline pins are fully inserted into the incline legs.
A moment after you press the button, the treadmill
will automatically adjust to the first speed setting of
the workout. Hold the handrails and begin walking.
At the end of each segment of the workout, a se-
ries of tones will sound. If a different speed setting
is programmed for the next segment, the speed
setting will flash in the display to alert you. When
the next segment begins, the speed of the walking
belt will automatically adjust to the speed setting for
the next segment.
After you have adjusted the incline legs, lower the
treadmill (see page 15).
The workout will continue in this way until you have
walked or run for 30 minutes. The walking belt will
then slow to a stop.
Incline
Incline
Pin
Pin
Incline
Leg
If the speed setting for the current segment is too
high or too low, you can override the setting by
pressing the Digital Speed buttons; however,
when the next segment begins, the treadmill
will automatically adjust to the speed setting
for the next segment.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
1
Unplug the power cord. CAUTION: You must be able to
safely lift 45 lbs. (20 kg) to raise, lower, or move the
treadmill.
1. Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the pos-
sibility of injury, do not lift the frame by the plastic
foot rails. Make sure to bend your legs and keep your
back straight. As you raise the frame, make sure to lift
with your legs rather than your back. Raise the frame
about halfway to the vertical position.
Frame
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob
to the left and hold it. Raise the frame until the hole in the
latch plate is aligned with the latch pin. Slowly release the
latch knob; make sure that the latch pin is fully in-
serted into the latch plate.
2
Latch
Pin
Latch
Knob
Latch
Plate
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° F (30° C).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the latch
pin is fully inserted into the latch plate.
1. Hold the handrails and place one foot against a wheel.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.
Handrail
Wheel
3. Place one foot against one of the wheels, and carefully
lower the treadmill until it is in the storage position.
HOW TO LOWER THE TREADMILL FOR USE
1. See drawing 2 above. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold
it. Pivot the frame down until it is past the latch pin.
2. See drawing 1 above. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To
decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails. Do not
drop the frame to the floor. Make sure to bend your legs and keep your back straight.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please see the front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 11). Use only a single-outlet surge suppres-
sor that meets all of the specifications described on page 11. IMPORTANT: The treadmill is not
compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the reset/off circuit breaker located on the
c
treadmill frame near the power cord. If the switch
protrudes as shown, the circuit breaker has
tripped. To reset the circuit breaker, wait for five
minutes, and then press the switch back in.
Tripped
Position
Reset
Position
PROBLEM: The power turns off during use
SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait
for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console.
d. If the treadmill still will not run, please see the front cover of this manual.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and UNPLUG THE
a
POWER CORD. Remove the five indicated M4.2 x
10mm Screws (20) and two M5.5 x 25mm Screws
(25). Carefully remove the Motor Hood (67).
67
25
25
20
20
20
20
Locate the Reed Switch (53) and the Magnet (51) on
the left side of the Pulley (50). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8 in. (3 mm). If necessary, loosen
the M4.2 x 13mm Screw (18), move the Reed Switch
slightly, and then retighten the Screw. Reattach the
Hood (not shown), and run the treadmill for a few min-
utes to check for a correct speed reading.
1/8 in.
18
50
51
53
Top View
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 11.
b. If the walking belt is overtightened, treadmill perfor-
b
mance may decrease and the walking belt may be-
2–3 in.
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the hex key, turn both idler
roller bolts counterclockwise, 1/4 of a turn. When the
walking belt is properly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to 7
cm) off the walking platform. Be careful to keep the
walking belt centered. Then, plug in the power cord,
insert the key, and run the treadmill for a few min-
utes. Repeat until the walking belt is properly tight-
ened.
Idler Roller
Bolts
c. If the walking belt still slows when walked on, see the front cover of this manual.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt has shifted to the left, first re-
a
move the key and UNPLUG THE POWER CORD.
Using the hex key, turn the left idler roller bolt clock-
wise 1/2 of a turn. Be careful not to overtighten the
walking belt. If the walking belt has shifted to the
right, turn the left idler roller bolt counterclockwise 1/2
of a turn. Then, plug in the power cord, insert the key,
and run the treadmill for a few minutes. Repeat until
the walking belt is centered.
SOLUTION: a. If the walking belt slips when walked on, first remove
a
the key and UNPLUG THE POWER CORD. Using
the hex key, turn both idler roller bolts clockwise, 1/4
of a turn. When the walking belt is correctly tightened,
you should be able to lift each edge of the walking
belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then, plug
in the power cord, insert the key, and carefully walk
on the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic exer-
cise, which is activity that requires large amounts of
oxygen for prolonged periods of time. For aerobic ex-
ercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
WARNING:
Before beginning any
exercise program, consult your physician.
This is especially important for persons over
the age of 35 or persons with pre-existing
health problems.
HOW TO MEASURE YOUR HEART RATE
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
To measure your heart
rate, exercise for at least
four minutes. Then, stop
exercising and place two
fingers on your wrist as
EXERCISE INTENSITY
shown. Take a six-sec-
ond heartbeat count,
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
and multiply the result
by 10 to find your heart rate. For example, if your six-
second heartbeat count is 14, your heart rate is 140
beats per minute.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
Cooling Down—Finish with 5 to 10 minutes of stretch-
ing. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. WLTL24308.0
R0708B
Key No. Qty.
Description
Key No. Qty.
Description
1
2
2
2
4
2
4
13
2
2
2
4
6
2
6
1
1
2
12
1
5
6
2
1
2
10
2
4
2
2
1
2
2
2
1
1
2
4
2
2
2
3
5
1
1
1
1
4
2
1
1
M8 x 52mm Bolt
M4.2 x 16mm Screw
M10 x 110mm Bolt
M10 x 58mm Bolt
M10 x 80mm Bolt
M4.2 x 19mm Screw
M4.2 x 18mm Screw
M5 x 16mm Screw
M5 Star Washer
M10 Star Washer
M8 Washer
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
*
1
1
1
1
1
1
1
1
1
1
5
2
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
6
1
1
1
2
1
1
1
1
2
–
–
–
–
Magnet
2
Reed Switch Clamp
Reed Switch
3
4
Drive Motor Belt
Console Crossbar
Choke
5
6
7
Walking Belt
8
Walking Platform
Frame
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Releasable Tie
8" Tie
M10 Washer
Incline Pin
M8 Jam Nut
Incline Leg
M10 Jam Nut
Right Idler Roller Bracket
Frame Cap
6mm Hex Key
4mm Hex Key
Left Idler Roller Bracket
Motor Hood
M8 x 35mm Screw
M4.2 x 16mm Black Screw
M4 x 10mm Ground Screw
M4.2 x 10mm Screw
M4.2 x 13mm Screw
M4.2 x 18mm Screw
M6 x 50mm Bolt
M4 x 12mm Bolt
M5.5 x 25mm Screw
M8 x 30mm Bolt
M4.2 x 13mm Belt Guide Screw
M6 x 70mm Bolt
1/4" Motor Bolt
Motor Bracket
Drive Motor
Controller
Electronics Plate
Power Cord
Power Cord Grommet
Belly Pan
Dust Guard
Belly Pan Grommet
Power Outlet Bracket
Reset/Off Circuit Breaker
Handrail Cap
Left Handrail
Right Handrail
Latch Housing
Wire Harness
Frame Spacer
Wheel
M8 x 102mm Bolt
M6 x 23mm Screw
M8 x 20mm Bolt
M6 Star Washer
M6 Star Washer
M8.4 Star Washer
M4 Washer
Base Foot
M4.2 Star Washer
M8 Motor Nut
Base
Console
M4 Nut
Key/Clip
M10 Insert Nut
Wire Tie
M8 Nut
5mm Hex Key
Idler Roller
Hood Clip
Left Foot Rail
Handrail Grommet
Latch Assembly
M4.2 x 16mm Plate Screw
4" White Wire, M/F
4" Blue Wire, 2F
4" Black Wire, 2F
Userʼs Manual
Frame Latch Plate
Warning Decal
Latch Plate
Isolator
*
Belt Guide
*
Right Foot Rail
*
Drive Roller/Pulley
Note: Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts. *These parts are not illustrated.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING A—Model No. WLTL24308.0
R0708B
5
2
6
1
6
5
1
9
0
5
6
7
1
8
4
1
2
2
5
2
0
4
8
4
9
0
4
1
3
3
6
2
4
3
7
2
1
7
3
4
5
2
8
1
1
4
0
4
8
4
0
1
5
5
9
5
1
5
5
2
2
5
3
5
1
7
7
3
4
5
8
5
2
6
1
8
1
1
1
5
8
2
7
4
7
3
2
1
6
3
6
1
4
5
9
1
1
1
4
8
7
6
1
4
4
2
6
5
1
6
7
2
5
3
3
2
3
8
1
8
4
2
1
4
1
3
5
1
4
6
2
2
9
5
2
1
1
3
3
4
1
6
4
6
7
1
6
2
1
6
5
1
7
6
2
3
3
3
8
2
5
2
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING B—Model No. WLTL24308.0
R0708B
42
42
42
42
67
32
29
35
42
21
38
74
32
68
70
21
69
37
20
71
18
18
24
20
36
20
20
78
24
36
72
77
39
73
19
75
18
76
7
20
18
21
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING C—Model No. WLTL24308.0
R0708B
7
79
55
7
7
6
7
9
8
79
2
83
82
80
94
6
8
9
3
84
5
81
12
10
4
10
12
84
3
85
86
93
14
4
83
12
86
7
14
14
85
7
5
87
86
86
7
7
12
86
86
14
7
7
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING D—Model No. WLTL24308.0
R0708B
88
89
18
90
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-
vide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. Parts and labor are warranted for ninety (90) days
from the date of purchase.
This warranty extends only to the original purchaser. ICONʼs obligation under this warranty is limited to
repairing or replacing, at ICONʼs option, the product through one of its authorized service centers. All re-
pairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a
service center, freight charges to and from the service center will be the customerʼs responsibility. For
replacement parts shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge.
This warranty does not extend to any damage to a product caused by or attributable to freight damage,
abuse, misuse, improper or abnormal usage, or repairs not provided by an ICON authorized service cen-
ter; products used for commercial or rental purposes; or products used as store display models. No other
warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in con-
nection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-
cidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 268006 R0708B
Printed in China © 2008 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|