Weslo Treadmill WETL347090 User Manual

Model No. WETL34709.0  
Serial No.  
USER'S MANUAL  
Write the serial number in the space  
above for reference.  
Serial Number  
Decal  
QUESTIONS?  
If you have questions, or if there are  
missing parts, please contact us:  
Call: 08457 089 009  
From Ireland: 053 92 36102  
Write:  
ICON Health & Fitness, Ltd.  
c/o HI Group PLC, Express Way  
Whitwood, West Yorkshire  
WF10 5QJ  
UK  
CAUTION  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this manual  
for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRECAUTIONS  
WARNING:  
To reduce the risk of serious injury, read all important precautions and in-  
structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-  
sumes no responsibility for personal injury or property damage sustained by or through the use of  
this product.  
1. Before beginning any exercise program, con-  
sult your physician. This is especially impor-  
tant for persons over age 35 or persons with  
pre-existing health problems.  
cuit. No other appliance should be on the  
same circuit. When replacing the fuse, an  
ASTA approved BS1362 type should be fitted  
to the fuse carrier. A 13 amp fuse should be  
used. Do not use an extension cord.  
2. It is the responsibility of the owner to ensure  
that all users of this treadmill are adequately  
informed of all warnings and precautions.  
11. Keep the power cord away from heated sur-  
faces.  
3. Use the treadmill only as described.  
12. Never move the walking belt while the power  
is turned off. Do not operate the treadmill if  
the power cord or plug is damaged, or if the  
treadmill is not working properly. (See TROU-  
BLESHOOTING on page 14 if the treadmill is  
not working properly.)  
4. Place the treadmill on a level surface, with at  
least 8 ft. (2.4 m) of clearance behind it and 2  
ft. (0.6 m) on each side. Do not place the  
treadmill on any surface that blocks air open-  
ings. To protect the floor or carpet from dam-  
age, place a mat under the treadmill.  
13. Read, understand, and test the emergency  
stop procedure before using the treadmill (see  
HOW TO TURN ON THE POWER on page 10).  
5. Keep the treadmill indoors, away from mois-  
ture and dust. Do not put the treadmill in a  
garage or covered patio, or near water.  
14. Never start the treadmill while you are stand-  
ing on the walking belt. Always hold the up-  
rights while using the treadmill.  
6. Do not operate the treadmill where aerosol  
products are used or where oxygen is being  
administered.  
15. The treadmill is capable of high speeds.  
Adjust the speed in small increments to avoid  
sudden jumps in speed.  
7. The treadmill should be used only by persons  
weighing 220 lbs. (100 kg) or less.  
16. The pulse sensor is not a medical device.  
Various factors, including the user's move-  
ment, may affect the accuracy of heart rate  
readings. The pulse sensor is intended only  
as an exercise aid in determining heart rate  
trends in general.  
8. Never allow more than one person on the  
treadmill at a time.  
9. Wear appropriate exercise clothes when  
using the treadmill. Do not wear loose clothes  
that could become caught in the treadmill.  
Athletic support clothes are recommended  
for both men and women. Always wear ath-  
letic shoes. Never use the treadmill with bare  
feet, wearing only stockings, or in sandals.  
17. Never leave the treadmill unattended while it  
is running. Always remove the key, unplug  
the power cord, and switch the on/off switch  
to the off position when the treadmill is not in  
use. (See the drawing on page 5 for the loca-  
tion of the switch.)  
10. When connecting the power cord (see page  
8), plug the power cord into an earthed cir-  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. Do not attempt to raise, lower, or move the  
treadmill until it is properly assembled. (See  
ASSEMBLY on page 6, and HOW TO FOLD  
AND MOVE THE TREADMILL on page 13.)  
You must be able to safely lift 45 lbs. (20 kg)  
to raise, lower, or move the treadmill.  
23. This treadmill is intended for in-home use  
only. Do not use this treadmill in a commer-  
cial, rental, or institutional setting.  
24. Over exercising may result in serious injury  
or death. If you feel faint or if you experience  
pain while exercising, stop immediately and  
cool down.  
19. When folding or moving the treadmill, make  
sure that the storage latch is holding the  
frame securely in the storage position.  
25. This treadmill is not intended for use by per-  
sons with reduced physical, sensory, or men-  
tal capabilities, or lack of experience and  
knowledge, unless they have been given su-  
pervision or instruction concerning the use of  
the treadmill by a person responsible for their  
safety. Keep children under age 12 and pets  
away from the treadmill at all times.  
20. Never insert any object into any opening on  
the treadmill.  
21. Inspect and properly tighten all parts of the  
treadmill regularly.  
22.  
DANGER:  
Always unplug the power  
26. If the power cord is damaged, it must be re-  
placed by the manufacturer, its service agent,  
or similar persons in order to avoid injury or  
damage to the treadmill.  
cord immediately after use, before cleaning the  
treadmill, and before performing the mainte-  
nance and adjustment procedures described in  
this manual. Never remove the motor hood un-  
less instructed to do so by an authorized ser-  
vice representative. Servicing other than the  
procedures in this manual should be performed  
by an authorized service representative only.  
SAVE THESE INSTRUCTIONS  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
®
Thank you for selecting the revolutionary WESLO  
ing this manual, please see the front cover of this man-  
ual. To help us assist you, note the product model  
number and serial number before contacting us. The  
model number and the location of the serial number  
decal are shown on the front cover of this manual.  
COMPACT ELITE treadmill. The COMPACT ELITE  
treadmill offers an impressive selection of features de-  
signed to make your workouts at home more enjoyable  
and effective. And when youʼre not exercising, the  
unique treadmill can be folded up, requiring less than  
half the floor space of other treadmills.  
Before reading further, please familiarize yourself with  
the parts that are labeled in the drawing below.  
For your benefit, read this manual carefully before  
using the treadmill. If you have questions after read-  
Console  
Key/Clip  
Pulse Sensor  
Upright  
On/Off Switch  
Walking Belt  
Foot Rail  
Cushioned Platform  
Idler Roller  
Adjustment Bolts  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not  
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking  
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of  
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-  
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.  
1. Make sure that the power cord is unplugged.  
1
Turn the Upright Knobs (11) counterclockwise  
(only one is shown).  
See the lower drawing. Pull the Latch Knob  
3, 4  
(10), partially raise the Uprights (3, 4) and then  
11  
release the Latch Knob. With the help of a sec-  
ond person, raise the Uprights.  
Turn the Upright Knobs (11) clockwise to lock  
the Uprights (3, 4) in the vertical position.  
3
4
10  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Pivot the console assembly to the desired posi-  
tion and tighten the Console Knobs (37).  
2
Console  
Assembly  
Always make sure that the Console Knobs  
(37) are fully tightened before you use the  
treadmill.  
37  
3. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear  
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-  
mill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages  
14 and 15).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION AND ADJUSTMENT  
THE PRE-LUBRICATED WALKING BELT  
Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-  
cone spray or similar substances to the walking belt or the walking platform. Such substances will deteri-  
orate the walking belt and cause excessive wear.  
HOW TO PLUG IN THE POWER CORD  
This product is for use on a dedicated, 20-amp, 220–240 volt circuit. This product must be earthed. If it  
should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the  
risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an  
earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recom-  
mended power cord.  
See drawing 1. Press the pins on the power cord into the metal clips  
1
in the adapter as shown. Close the adapter cover over the end of the  
power cord and tighten the screw in the adapter. IMPORTANT:  
Make sure that the adapter cover is secure and the screw has  
been tightened before using the power cord.  
Adapter  
Cover  
Screw  
Pins  
Adapter  
2
Metal  
Clips  
See drawing 2. Plug the power cord into an appropriate outlet that is  
properly installed and earthed in accordance with all local codes and  
ordinances.  
Outlet  
DANGER:  
Improper connection of the equipment-earthing conductor can result in an in-  
creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as  
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will  
not fit the outlet, have a proper outlet installed by a qualified electrician.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSOLE DIAGRAM  
QUICKKmS/HPEED  
Key  
Clip  
FEATURES OF THE CONSOLE  
To turn on the power, see page 10. To use the man-  
ual mode, see page 10. To use a preset workout,  
see page 12.  
The treadmill console offers an impressive array of  
features designed to make your workouts more effec-  
tive and enjoyable.  
IMPORTANT: If there are sheets of clear plastic on  
the console, remove the plastic. To prevent damage  
to the walking platform, wear clean athletic shoes  
while using the treadmill. The first time you use the  
treadmill, observe the alignment of the walking  
When you use the manual mode, you can change the  
speed of the treadmill with the touch of a button. As  
you exercise, the console will display instant exercise  
feedback. You can even measure your heart rate using belt, and center the walking belt if necessary (see  
the handgrip pulse sensor.  
page 15).  
In addition, the console features four preset workouts.  
Each workout automatically controls the speed of the  
treadmill as it guides you through an effective exercise  
session.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO TURN ON THE POWER  
HOW TO USE THE MANUAL MODE  
1. Insert the key into the console.  
See HOW TO TURN ON THE POWER at the left.  
2. Select the manual mode.  
IMPORTANT: If the treadmill has been exposed to  
cold temperatures, allow it to warm to room tem-  
perature before turning on the power. If you do not  
do this, you may damage the console displays or  
other electrical components.  
Plug in the power cord (see  
page 8). Next, locate the  
on/off switch on the treadmill  
When the key is inserted, the manual mode will be  
selected. If a workout has been selected, remove  
the key and then reinsert it.  
On  
frame near the power cord.  
Push the switch to the on  
position.  
3. Start the walking belt.  
To start the walking belt, press the Start button.  
The walking belt will begin to move. As you exer-  
cise, change the speed of the walking belt as de-  
sired by pressing the Fast and Slow buttons. Note:  
After you press a button, it may take a moment for  
the walking belt to reach the selected speed set-  
ting.  
Next, stand on the foot rails of the treadmill. Find the  
clip attached to the key (see the drawing on page 9)  
and slide the clip onto the waistband of your clothes.  
Then, insert the key into the console. IMPORTANT: In  
an emergency situation, the key can be pulled from  
the console, causing the walking belt to slow to a  
stop. Test the clip by carefully taking a few steps  
backward; if the key is not pulled from the console,  
adjust the position of the clip.  
If you press one of the speed buttons numbered 1  
to 12, the walking belt will gradually change speed  
until it reaches the selected speed setting.  
Before you use the treadmill for the first time, allow the  
treadmill to run for at least ten minutes without anyone  
on the treadmill.  
To stop the walking belt, press the Stop button. To  
restart the walking belt, press the Start button or  
the Fast button.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Follow your progress with the display.  
To measure your  
heart rate, stand  
on the foot rails  
and hold the metal  
contacts. Avoid  
moving your  
The speed display shows the speed of the walk-  
ing belt.  
The time display shows the elapsed time. Note:  
When a workout is selected, the display will show  
the time remaining in the workout instead of the  
elapsed time.  
hands. When  
your pulse is de-  
tected, your heart  
beats and then  
Contacts  
The calories display shows the approximate num-  
your heart rate will be shown. For the most accu-  
rate heart rate reading, continue to hold the  
contacts for about 15 seconds.  
ber of calories you have burned.  
The program/distance display shows the dis-  
tance you have walked or run. This display will also 6. When you are finished exercising, remove the  
show the distance you still have to run and the  
workout number when you use a preset workout.  
key from the console.  
Step onto the foot rails, press the Stop button, re-  
move the key from the console, and put it in a se-  
cure place.  
The pulse/levels display will show your heart rate  
when you use the handgrip pulse sensor (see step  
5). This display will also show the workout level  
when you use a preset workout.  
When you are finished using the treadmill, switch  
the on/off switch to the off position and unplug the  
power cord. IMPORTANT: If you do not do this,  
the treadmillʼs electrical components may wear  
prematurely.  
To reset the display, press the Stop button, remove  
the key, and then reinsert the key.  
5. Measure your heart rate if desired.  
Before using the handgrip pulse sensor, remove  
the sheets of clear plastic from the metal contacts  
on the pulse bar. In addition, make sure that your  
hands are clean.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE A PRESET WORKOUT  
1. Insert the key into the console.  
See step 1 on page 10.  
To stop the workout at any time, press the Stop  
button. To restart the workout, press the Start but-  
ton. The walking belt will begin to move. When the  
next segment of the workout begins, the treadmill  
will automatically adjust to the speed setting for the  
next segment.  
2. Select a preset workout.  
4. Follow your progress with the display.  
See step 4 on page 11.  
To select a preset workout, press the Select button.  
Press the Fast button or the Slow button to select  
the desired workout and then press the Select but-  
ton. Next, press the Fast button or the Slow button  
to select the desired workout level and press the  
Select button. Then, press the Fast button or the  
Slow button to select the workout duration.  
5. Measure your heart rate if desired.  
See step 5 on page 11.  
6. When you are finished exercising, remove the  
key from the console.  
3. Start the walking belt.  
Press the Start button to start the workout. A mo-  
ment after you press the button, the treadmill will  
automatically adjust to the first speed setting of the  
workout. Hold the handrails and begin walking.  
See step 6 on page 11.  
HOW TO CHANGE THE INCLINE OF THE TREADMILL  
Each workout is divided into segments. One speed  
setting is programmed for each segment. Note:  
The same speed setting may be programmed for  
consecutive segments.  
To vary the intensity of your exercise, you can change  
the incline of the treadmill. There are two incline levels.  
Before changing the incline, remove the key and  
unplug the power cord.  
Several seconds before the speed of the treadmill  
is about to change, a series of tones will sound to  
alert you. The treadmill will then automatically ad-  
just to the speed setting for the next segment.  
To change the incline, raise the frame slightly. Bend  
your legs and keep your back straight as you raise  
the frame. Pivot the incline arm to the desired position.  
Lower the frame. CAUTION: Before using the tread-  
mill, make sure that the incline arm is held securely  
in one of the incline positions.  
The workout will continue in this way until the last  
segment ends. The walking belt will then slow to a  
stop.  
If the speed setting is too high or too low at any  
time during the workout, you can manually override  
the setting by pressing the speed buttons; how-  
ever, when the next segment of the workout be-  
gins, the treadmill will automatically adjust to  
the speed setting for the next segment.  
Incline  
Frame  
Arm  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO FOLD AND MOVE THE TREADMILL  
HOW TO FOLD THE TREADMILL FOR STORAGE  
1
Before folding the treadmill, remove the key and unplug the  
power cord. CAUTION: You must be able to safely lift 45 lbs.  
(20 kg) to raise, lower, or move the treadmill.  
1. Hold the metal frame firmly in the location shown by the  
arrow at the right. CAUTION: To decrease the possibility of  
injury, do not lift the frame by the plastic foot rails. Bend  
your legs and keep your back straight as you raise the  
frame. Raise the frame about halfway to the vertical position.  
Frame  
2. Raise the frame until the latch knob locks into the storage posi-  
2
tion. Make sure that the latch knob is locked in the storage  
position.  
To protect the floor or carpet from damage, place a mat  
under the treadmill. Keep the treadmill out of direct sun-  
Frame  
light. Do not leave the treadmill in the storage position in  
temperatures above 85° F (30° C).  
Latch Knob  
HOW TO MOVE THE TREADMILL  
Before moving the treadmill, convert the treadmill to the storage  
position as described above. Make sure that the latch knob is  
locked in the storage position.  
Upright  
1. Hold an upright and place a foot against one of the wheels.  
2. Tip the treadmill back until it rolls freely on the wheels. Carefully  
move the treadmill to the desired location. Never move the  
treadmill without tipping it back. To reduce the risk of in-  
jury, use extreme caution while moving the treadmill. Do  
not attempt to move the treadmill over an uneven surface.  
3. Place one foot against a wheel, and carefully lower the tread-  
mill until it is resting in the storage position.  
Wheel  
HOW TO LOWER THE TREADMILL FOR USE  
1. See drawing 2. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold  
it. It may be necessary to push the frame forward as you pull the knob to the left. Pivot the frame downward  
and release the latch knob.  
2. See drawing 1. Hold the metal frame firmly with both hands and lower it to the floor. CAUTION: Do not  
grip only the plastic foot rails or drop the frame to the floor. Bend your legs and keep your back  
straight.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and  
follow the steps listed. If further assistance is needed, please see the front cover of this manual.  
PROBLEM: The power does not turn on  
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 8). Do not use  
an extension cord.  
b. After the power cord has been plugged in, make sure that the key is inserted into the console.  
c. Check the on/off switch located on the treadmill  
c
frame near the power cord. If the switch protrudes  
as shown, the switch has tripped. To reset the  
Tripped  
On  
switch, wait for five minutes and then press the  
switch back in.  
PROBLEM: The power turns off during use  
SOLUTION: a. Check the on/off switch (see the drawing above). If the switch has tripped, wait for five minutes  
and then press the switch back in.  
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for  
five minutes, and then plug it back in.  
c. Remove the key from the console. Reinsert the key into the console.  
d. If the treadmill still will not run, please see the front cover of this manual.  
PROBLEM: The walking belt slows when walked on  
SOLUTION: a. If the walking belt is overtightened, treadmill perfor-  
a
mance may decrease and the walking belt may be-  
come damaged. Remove the key and UNPLUG  
THE POWER CORD. Using the hex key, turn both  
idler roller bolts counterclockwise, 1/4 of a turn.  
When the walking belt is properly tightened, you  
should be able to lift each edge of the walking belt  
2 to 3 in. (5 to 7 cm) off the walking platform. Be  
careful to keep the walking belt centered. Then,  
plug in the power cord, insert the key, and run the  
treadmill for a few minutes. Repeat until the walk-  
ing belt is properly tightened.  
2–3 in.  
Idler Roller Bolts  
b. If the walking belt still slows when walked on, see the front cover of this manual.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM: The walking belt is off-center or slips when walked on  
SOLUTION: a. If the walking belt is off-center, first remove the  
key and UNPLUG THE POWER CORD. If the  
walking belt has shifted to the left, use the hex  
key to turn the left idler roller bolt clockwise 1/2 of a  
turn; if the walking belt has shifted to the right,  
turn the left idler roller bolt counterclockwise 1/2 of  
a turn. Be careful not to overtighten the walking  
belt. Then, plug in the power cord, insert the key,  
and run the treadmill for a few minutes. Repeat  
until the walking belt is centered.  
a
b. If the walking belt slips when walked on, first re-  
move the key and UNPLUG THE POWER CORD.  
Using the hex key, turn both idler roller bolts clock-  
wise, 1/4 of a turn. When the walking belt is cor-  
rectly tightened, you should be able to lift each  
edge of the walking belt 2 to 3 in. (5 to 7 cm) off  
the walking platform. Be careful to keep the walk-  
ing belt centered. Then, plug in the power cord, in-  
sert the key, and carefully walk on the treadmill for  
a few minutes. Repeat until the walking belt is  
properly tightened.  
b
LUBRICATING THE WALKING BELT  
When the treadmill is used regularly, lubricate the walking belt every two to six months. If the underside of the  
walking belt does not feel slick to the touch, lubricate the walking belt. If additional lubricant is needed, see the  
front cover of this manual.  
To lubricate the walking belt, remove the key from the console  
and unplug the power cord. Pull the left and right edges of the  
Seam  
walking belt toward the idler roller, until the seam of the walking  
belt is above the middle of the walking platform. Avoid pinching  
your fingers.  
Insert the spray valve into the lubricant bottle. Lift the right edge  
of the walking belt and spray lubricant underneath the walking  
belt for approximately four seconds. Make sure to spray lubricant  
near the center of the walking belt and near the front and back of  
the treadmill. Repeat this step on the left side of the tread-  
mill. Wait one minute before starting the treadmill.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXERCISE GUIDELINES  
Burning Fat—To burn fat effectively, you must exer-  
cise at a low intensity level for a sustained period of  
time. During the first few minutes of exercise, your  
body uses carbohydrate calories for energy. Only after  
the first few minutes of exercise does your body begin  
to use stored fat calories for energy. If your goal is to  
burn fat, adjust the intensity of your exercise until your  
heart rate is near the lowest number in your training  
zone. For maximum fat burning, exercise with your  
heart rate near the middle number in your training  
zone.  
WARNING:  
Before beginning this  
or any exercise program, consult your physi-  
cian. This is especially important for persons  
over age 35 or persons with pre-existing  
health problems.  
The pulse sensor is not a medical device.  
Various factors may affect the accuracy of  
heart rate readings. The pulse sensor is in-  
tended only as an exercise aid in determining  
heart rate trends in general.  
Aerobic Exercise—If your goal is to strengthen your  
cardiovascular system, you must perform aerobic exer-  
cise, which is activity that requires large amounts of  
oxygen for prolonged periods of time. For aerobic ex-  
ercise, adjust the intensity of your exercise until your  
heart rate is near the highest number in your training  
zone.  
These guidelines will help you to plan your exercise  
program. For detailed exercise information, obtain a  
reputable book or consult your physician. Remember,  
proper nutrition and adequate rest are essential for  
successful results.  
WORKOUT GUIDELINES  
EXERCISE INTENSITY  
Warming Up—Start with 5 to 10 minutes of stretching  
and light exercise. A warm-up increases your body  
temperature, heart rate, and circulation in preparation  
for exercise.  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, exercising at the proper inten-  
sity is the key to achieving results. You can use your  
heart rate as a guide to find the proper intensity level.  
The chart below shows recommended heart rates for  
fat burning and aerobic exercise.  
Training Zone Exercise—Exercise for 20 to 30 min-  
utes with your heart rate in your training zone. (During  
the first few weeks of your exercise program, do not  
keep your heart rate in your training zone for longer  
than 20 minutes.) Breathe regularly and deeply as you  
exercise–never hold your breath.  
Cooling Down—Finish with 5 to 10 minutes of stretch-  
ing. Stretching increases the flexibility of your muscles  
and helps to prevent post-exercise problems.  
EXERCISE FREQUENCY  
To find the proper intensity level, find your age at the  
bottom of the chart (ages are rounded off to the near-  
est ten years). The three numbers listed above your  
age define your “training zone.” The lowest number is  
the heart rate for fat burning, the middle number is the  
heart rate for maximum fat burning, and the highest  
number is the heart rate for aerobic exercise.  
To maintain or improve your condition, complete three  
workouts each week, with at least one day of rest be-  
tween workouts. After a few months of regular exer-  
cise, you may complete up to five workouts each  
week, if desired. Remember, the key to success is to  
make exercise a regular and enjoyable part of your  
everyday life.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. WETL34709.0  
To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.  
R1209B  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
1
1
1
1
1
1
1
1
1
1
2
1
4
1
1
1
1
1
1
2
1
1
4
2
4
1
1
1
1
2
2
1
1
1
1
2
2
Base  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
*
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
2
1
2
1
2
2
1
35  
4
3
2
2
1
1
Key/Clip  
2
Frame  
Incline Arm Washer  
Lower Support Tube Cap  
Upper Support Tube Cap  
Walking Belt  
3
Left Upright  
4
Right Upright  
5
Console Bracket  
Incline Arm  
6
Walking Platform  
Drive Belt  
7
Lower Support Tube  
Upper Support Tube  
Motor Bracket  
Latch Knob  
8
Display  
9
Button Sensor  
Pulse Sensor  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
Upright Knob  
Motor Sensor Wire  
Controller  
Gas Spring  
Leveling Foot  
Drive Roller  
On/Off Switch  
Power Cord Receptacle  
Transformer  
Idler Roller  
Console  
Filter  
Console Back  
Motor Hood  
Drive Motor  
Upright Wire  
Belly Pan  
Console Wire Harness  
Ground Wire  
Foot Rail  
Left Rear Cap  
Right Rear Cap  
Wheel  
Red Plug Wire  
Green Plug Wire  
Power Cord  
Handgrip  
M10 x 55mm Bolt  
M10 x 90mm Bolt  
M8 X 60mm Bolt  
M8 x 40mm Bolt  
M8 x 70mm Bolt  
M4 x 15mm Bolt  
Console Bracket Screw  
Knob Cover Screw  
Pulse Plate Screw  
Idler Roller Washer  
Drive Roller Washer  
Latch Warning Decal  
Hex Key  
Isolators  
Left Outer Base Cover  
Right Inner Base Cover  
Left Inner Base Cover  
Right Outer Base Cover  
Inner Knob Cover  
Outer Knob Cover  
Left Outer Upright Cover  
Left Inner Upright Cover  
Right Inner Upright Cover  
Right Outer Upright Cover  
Pulse Plate  
Console Knob  
*
Grease  
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see  
the back cover of this manual. *These parts are not illustrated.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING A—Model No. WETL34709.0  
R1209B  
65  
57  
62  
60  
58  
59  
9
54  
44  
18  
52  
49  
61  
53  
14  
50  
51  
61  
71  
72  
64  
48  
42  
25  
25  
20  
20  
25  
43  
25  
2
21  
70  
15  
70  
63  
19  
22  
63  
39  
39  
23  
6
23  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING B—Model No. WETL34709.0  
R1209B  
24  
16  
24  
36  
56  
45  
38  
47  
67  
69  
46  
67  
36  
66  
5
66  
66  
3
69  
17  
66  
37  
4
32  
68  
33  
66  
31  
34  
35  
30  
30  
26  
11  
68  
28  
27  
31  
11  
13  
23  
29  
55  
13  
7
23  
12  
1
10  
41  
13  
40  
13  
8
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ORDERING REPLACEMENT PARTS  
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-  
vide the following information when contacting us:  
• the model number and serial number of the product (see the front cover of this manual)  
• the name of the product (see the front cover of this manual)  
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED  
DRAWING near the end of this manual)  
RECYCLING INFORMATION  
This electronic product must not be disposed of in municipal waste. To  
preserve the environment, this product must be recycled after its useful  
life as required by law.  
Please use recycling facilities that are authorized to collect this type of waste in  
your area. In doing so, you will help to conserve natural resources and improve  
European standards of environmental protection. If you require more information  
about safe and correct disposal methods, please contact your local city office or  
the establishment where you purchased this product.  
Part No. 292954 R1209B  
Printed in China © 2009 ICON IP, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weil McLain Burner UO 3 CV User Manual
Whirlpool Oven RS696PXGB7 User Manual
Whirlpool Ventilation Hood UXT5430ADB User Manual
Worth Data Scanner LZ300 User Manual
Xerox Refrigerator HM315FF User Manual
Yamaha CD Player CDC 655 User Manual
Yamaha Motorcycle 4C8 28199 10 User Manual
Yamaha Stereo Amplifier DSP AX463 User Manual
Zanussi Plumbing Product 132706 User Manual
Zanussi Washer Dryer ZTK123 User Manual